diff options
Diffstat (limited to 'readline/examples/rlfe/config.h.in')
| -rw-r--r-- | readline/examples/rlfe/config.h.in | 375 |
1 files changed, 375 insertions, 0 deletions
diff --git a/readline/examples/rlfe/config.h.in b/readline/examples/rlfe/config.h.in new file mode 100644 index 0000000..f8ff13b --- /dev/null +++ b/readline/examples/rlfe/config.h.in @@ -0,0 +1,375 @@ +/* Copyright 2004 Per Bothner <per@bothner.com> + * Based on config.h from screen-4.0.2. + * Copyright (c) 1993-2000 + * Juergen Weigert (jnweiger@immd4.informatik.uni-erlangen.de) + * Michael Schroeder (mlschroe@immd4.informatik.uni-erlangen.de) + * Copyright (c) 1987 Oliver Laumann + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program (see the file COPYING); if not, write to the + * Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA + * + **************************************************************** + * $Id$ FAU + */ + + + + + +/********************************************************************** + * + * User Configuration Section + */ + + +/* + * define PTYMODE if you do not like the default of 0622, which allows + * public write to your pty. + * define PTYGROUP to some numerical group-id if you do not want the + * tty to be in "your" group. + * Note, screen is unable to change mode or group of the pty if it + * is not installed with sufficient privilege. (e.g. set-uid-root) + * define PTYROFS if the /dev/pty devices are mounted on a read-only + * filesystem so screen should not even attempt to set mode or group + * even if running as root (e.g. on TiVo). + */ +#undef PTYMODE +#undef PTYGROUP +#undef PTYROFS + +/* + * If screen is NOT installed set-uid root, screen can provide tty + * security by exclusively locking the ptys. While this keeps other + * users from opening your ptys, it also keeps your own subprocesses + * from being able to open /dev/tty. Define LOCKPTY to add this + * exclusive locking. + */ +#undef LOCKPTY + + +/********************************************************************** + * + * End of User Configuration Section + * + * Rest of this file is modified by 'configure' + * Change at your own risk! + * + */ + +/* + * Some defines to identify special unix variants + */ +#ifndef SVR4 +#undef SVR4 +#endif + +#ifndef _POSIX_SOURCE +#undef _POSIX_SOURCE +#endif + +/* + * Define POSIX if your system supports IEEE Std 1003.1-1988 (POSIX). + */ +#undef POSIX + +/* + * Define TERMIO if you have struct termio instead of struct sgttyb. + * This is usually the case for SVID systems, where BSD uses sgttyb. + * POSIX systems should define this anyway, even though they use + * struct termios. + */ +#undef TERMIO + +/* + * Define CYTERMIO if you have cyrillic termio modes. + */ +#undef CYTERMIO + +/* + * Define TERMINFO if your machine emulates the termcap routines + * with the terminfo database. + * Thus the .screenrc file is parsed for + * the command 'terminfo' and not 'termcap'. + */ +#undef TERMINFO + +/* + * If your library does not define ospeed, define this. + */ +#undef NEED_OSPEED + +/* + * Define SYSV if your machine is SYSV complient (Sys V, HPUX, A/UX) + */ +#ifndef SYSV +#undef SYSV +#endif + +/* + * Define SIGVOID if your signal handlers return void. On older + * systems, signal returns int, but on newer ones, it returns void. + */ +#undef SIGVOID + +/* + * Define USESIGSET if you have sigset for BSD 4.1 reliable signals. + */ +#undef USESIGSET + +/* + * Define SYSVSIGS if signal handlers must be reinstalled after + * they have been called. + */ +#undef SYSVSIGS + +/* + * Define BSDWAIT if your system defines a 'union wait' in <sys/wait.h> + * + * Only allow BSDWAIT i.e. wait3 on nonposix systems, since + * posix implies wait(3) and waitpid(3). vdlinden@fwi.uva.nl + * + */ +#ifndef POSIX +#undef BSDWAIT +#endif + +/* + * On RISCOS we prefer wait2() over wait3(). rouilj@sni-usa.com + */ +#ifdef BSDWAIT +#undef USE_WAIT2 +#endif + +/* + * Define if you have the utempter utmp helper program + */ +#undef HAVE_UTEMPTER + +/* + * If ttyslot() breaks getlogin() by returning indexes to utmp entries + * of type DEAD_PROCESS, then our getlogin() replacement should be + * selected by defining BUGGYGETLOGIN. + */ +#undef BUGGYGETLOGIN + +/* + * If your system has the calls setreuid() and setregid(), + * define HAVE_SETREUID. Otherwise screen will use a forked process to + * safely create output files without retaining any special privileges. + */ +#undef HAVE_SETREUID + +/* + * If your system supports BSD4.4's seteuid() and setegid(), define + * HAVE_SETEUID. + */ +#undef HAVE_SETEUID + +/* + * If you want the "time" command to display the current load average + * define LOADAV. Maybe you must install screen with the needed + * privileges to read /dev/kmem. + * Note that NLIST_ stuff is only checked, when getloadavg() is not available. + */ +#undef LOADAV + +#undef LOADAV_NUM +#undef LOADAV_TYPE +#undef LOADAV_SCALE +#undef LOADAV_GETLOADAVG +#undef LOADAV_UNIX +#undef LOADAV_AVENRUN +#undef LOADAV_USE_NLIST64 + +#undef NLIST_DECLARED +#undef NLIST_STRUCT +#undef NLIST_NAME_UNION + +/* + * If your system has the new format /etc/ttys (like 4.3 BSD) and the + * getttyent(3) library functions, define GETTTYENT. + */ +#undef GETTTYENT + +/* + * Define USEBCOPY if the bcopy/memcpy from your system's C library + * supports the overlapping of source and destination blocks. When + * undefined, screen uses its own (probably slower) version of bcopy(). + * + * SYSV machines may have a working memcpy() -- Oh, this is + * quite unlikely. Tell me if you see one. + * "But then, memmove() should work, if at all available" he thought... + * Boing, never say "works everywhere" unless you checked SCO UNIX. + * Their memove fails the test in the configure script. Sigh. (Juergen) + */ +#undef USEBCOPY +#undef USEMEMCPY +#undef USEMEMMOVE + +/* + * If your system has vsprintf() and requires the use of the macros in + * "varargs.h" to use functions with variable arguments, + * define USEVARARGS. + */ +#undef USEVARARGS + +/* + * If your system has strerror() define this. + */ +#undef HAVE_STRERROR + +/* + * If the select return value doesn't treat a descriptor that is + * usable for reading and writing as two hits, define SELECT_BROKEN. + */ +#undef SELECT_BROKEN + +/* + * Define this if your system supports named pipes. + */ +#undef NAMEDPIPE + +/* + * Define this if your system exits select() immediatly if a pipe is + * opened read-only and no writer has opened it. + */ +#undef BROKEN_PIPE + +/* + * Define this if the unix-domain socket implementation doesn't + * create a socket in the filesystem. + */ +#undef SOCK_NOT_IN_FS + +/* + * If your system has setenv() and unsetenv() define USESETENV + */ +#undef USESETENV + +/* + * If your system does not come with a setenv()/putenv()/getenv() + * functions, you may bring in our own code by defining NEEDPUTENV. + */ +#undef NEEDPUTENV + +/* + * If the passwords are stored in a shadow file and you want the + * builtin lock to work properly, define SHADOWPW. + */ +#undef SHADOWPW + +/* + * If you are on a SYS V machine that restricts filename length to 14 + * characters, you may need to enforce that by setting NAME_MAX to 14 + */ +#undef NAME_MAX /* KEEP_UNDEF_HERE override system value */ +#undef NAME_MAX + +/* + * define HAVE_RENAME if your system has a rename() function + */ +#undef HAVE_RENAME + +/* + * define HAVE__EXIT if your system has the _exit() call. + */ +#undef HAVE__EXIT + +/* + * define HAVE_LSTAT if your system has symlinks and the lstat() call. + */ +#undef HAVE_LSTAT + +/* + * define HAVE_UTIMES if your system has the utimes() call. + */ +#undef HAVE_UTIMES + +/* + * define HAVE_FCHOWN if your system has the fchown() call. + */ +#undef HAVE_FCHOWN + +/* + * define HAVE_FCHMOD if your system has the fchmod() call. + */ +#undef HAVE_FCHMOD + +/* + * define HAVE_VSNPRINTF if your system has vsnprintf() (GNU lib). + */ +#undef HAVE_VSNPRINTF + +/* + * define HAVE_GETCWD if your system has the getcwd() call. + */ +#undef HAVE_GETCWD + +/* + * define HAVE_SETLOCALE if your system has the setlocale() call. + */ +#undef HAVE_SETLOCALE + +/* + * define HAVE_STRFTIME if your system has the strftime() call. + */ +#undef HAVE_STRFTIME + +/* + * define HAVE_NL_LANGINFO if your system has the nl_langinfo() call + * and <langinfo.h> defines CODESET. + */ +#undef HAVE_NL_LANGINFO + +/* + * Newer versions of Solaris include fdwalk, which can greatly improve + * the startup time of screen; otherwise screen spends a lot of time + * closing file descriptors. + */ +#undef HAVE_FDWALK + +/* + * define HAVE_DEV_PTC if you have a /dev/ptc character special + * device. + */ +#undef HAVE_DEV_PTC + +/* + * define HAVE_SVR4_PTYS if you have a /dev/ptmx character special + * device and support the ptsname(), grantpt(), unlockpt() functions. + */ +#undef HAVE_SVR4_PTYS + +/* + * define HAVE_GETPT if you have the getpt() function. + */ +#undef HAVE_GETPT + +/* + * define HAVE_OPENPTY if your system has the openpty() call. + */ +#undef HAVE_OPENPTY + +/* + * define PTYRANGE0 and or PTYRANGE1 if you want to adapt screen + * to unusual environments. E.g. For SunOs the defaults are "qpr" and + * "0123456789abcdef". For SunOs 4.1.2 + * #define PTYRANGE0 "pqrstuvwxyzPQRST" + * is recommended by Dan Jacobson. + */ +#undef PTYRANGE0 +#undef PTYRANGE1 + +#define USEVARARGS |