aboutsummaryrefslogtreecommitdiff
path: root/ld/testsuite/ld-undefined/undefined.exp
diff options
context:
space:
mode:
Diffstat (limited to 'ld/testsuite/ld-undefined/undefined.exp')
-rw-r--r--ld/testsuite/ld-undefined/undefined.exp256
1 files changed, 158 insertions, 98 deletions
diff --git a/ld/testsuite/ld-undefined/undefined.exp b/ld/testsuite/ld-undefined/undefined.exp
index a9ba9bb..c0c9012 100644
--- a/ld/testsuite/ld-undefined/undefined.exp
+++ b/ld/testsuite/ld-undefined/undefined.exp
@@ -29,119 +29,179 @@ if { ![is_remote host] && [which $CC] == 0 } {
untested $testund
untested $testfn
untested $testline
- return
-}
-
-if ![ld_compile "$CC -g" $srcdir/$subdir/undefined.c tmpdir/undefined.o] {
+} elseif { ![ld_compile "$CC -g" $srcdir/$subdir/undefined.c tmpdir/undefined.o] } {
verbose "Unable to compile test file!" 1
unresolved $testund
unresolved $testfn
unresolved $testline
- return
-}
+} else {
+ remote_file host delete "tmpdir/undefined"
-remote_file host delete "tmpdir/undefined"
+ set flags [big_or_little_endian]
-set flags [big_or_little_endian]
+ # Using -e start prevents the SunOS linker from trying to build a
+ # shared library.
+ send_log "$ld -e start $flags -o tmpdir/undefined tmpdir/undefined.o\n"
+ set exec_output [run_host_cmd "$ld" "-e start $flags -o tmpdir/undefined tmpdir/undefined.o"]
-# Using -e start prevents the SunOS linker from trying to build a
-# shared library.
-send_log "$ld -e start $flags -o tmpdir/undefined tmpdir/undefined.o\n"
-set exec_output [run_host_cmd "$ld" "-e start $flags -o tmpdir/undefined tmpdir/undefined.o"]
+ send_log "$exec_output\n"
+ verbose "$exec_output"
-send_log "$exec_output\n"
-verbose "$exec_output"
+ proc checkund { string testname } {
+ global exec_output
-proc checkund { string testname } {
- global exec_output
-
- if [string match "*$string*" $exec_output] {
- pass $testname
- } else {
- fail $testname
+ if [string match "*$string*" $exec_output] {
+ pass $testname
+ } else {
+ fail $testname
+ }
}
-}
-set mu "undefined reference to `*this_function_is_not_defined'"
-checkund $mu $testund
+ set mu "undefined reference to `*this_function_is_not_defined'"
+ checkund $mu $testund
-# ARM PE defaults to using stabs debugging, which we can't handle for
-# a COFF file.
-#setup_xfail "arm*-*-pe*"
+ # ARM PE defaults to using stabs debugging, which we can't handle
+ # for a COFF file.
+ #setup_xfail "arm*-*-pe*"
-# For Xtensa on GNU Linux systems (or any other system where PIC code is
-# always used), the address of the undefined function is in a literal pool
-# outside the function, so that both the "undefined function" and "undefined
-# line" tests fail.
-setup_xfail xtensa*-*-linux*
+ # For Xtensa on GNU Linux systems (or any other system where PIC
+ # code is always used), the address of the undefined function is
+ # in a literal pool outside the function, so that both the
+ # "undefined function" and "undefined line" tests fail.
+ setup_xfail xtensa*-*-linux*
-set mf "tmpdir/undefined.o* In function `function':"
-checkund $mf $testfn
+ set mf "tmpdir/undefined.o* In function `function':"
+ checkund $mf $testfn
-if ![is_elf_format] {
- # COFF SH gets this test wrong--it reports line 10, because although
- # the jump is at line 9, the function address, and the reloc, is
- # stored at the end of the function.
- setup_xfail "sh-*-*"
+ if ![is_elf_format] {
+ # COFF SH gets this test wrong--it reports line 10, because
+ # although the jump is at line 9, the function address, and
+ # the reloc, is stored at the end of the function.
+ setup_xfail "sh-*-*"
- # ARM PE defaults to using stabs debugging, which we can't handle for
- # a COFF file.
- #setup_xfail "arm*-*-pe*"
+ # ARM PE defaults to using stabs debugging, which we can't
+ # handle for a COFF file.
+ #setup_xfail "arm*-*-pe*"
+ }
+
+ set ml "undefined.c:9: undefined reference to `*this_function_is_not_defined'"
+ # With targets that use elf/dwarf2, such as the arm-elf toolchain,
+ # the code in bfd/elf.c:_bfd_elf_find_nearest_line() is called in
+ # order to locate the file name/line number where the undefined
+ # reference occurs. Unfortunately this tries to use the dwarf2
+ # debug information held in the .debug_info section. This section
+ # contains a series of comp_unit structures, each of which has a
+ # low/high address range representing the span of memory locations
+ # covered by that structure. The structures also index into other
+ # structures held in the .debug_line section and together they can
+ # translate memory locations back into file/function/line number
+ # addresses in the source code. Since the information about the
+ # memory region covered by a comp_unit is only determined at link
+ # time, the low/high addresses in the .debug_info section and the
+ # line addresses in the .debug_line section are computed by
+ # generating relocs against known symbols in the object code.
+ #
+ # When the undefined reference is detected, the relocs in the
+ # dwarf2 debug sections have not yet been resolved, so the
+ # low/high addresses and the line number address are all set at
+ # zero. Thus when _bfd_elf_find_nearest_line() calls
+ # _bfd_dwarf2_find_nearest_line() no comp_unit can be found which
+ # actually covers the address where the reference occurred, and so
+ # _bfd_elf_find_nearest_line() fails.
+ #
+ # The upshot of all of this, is that the error message reported by
+ # the linker, instead of having a source file name & line number
+ # as in:
+ #
+ # undefined.c:9: undefined reference to `this_function_is_not_defined'
+ #
+ # has an object file & section address instead:
+ #
+ # undefined.0(.text+0xc): undefined reference to `this_function_is_not_defined'
+ #
+ # hence the xfails below.
+
+ setup_xfail mcore-*-elf
+ setup_xfail mep-*-*
+ setup_xfail mips-sgi-irix6*
+ setup_xfail "sh64-*-*"
+ # Fails for the MSP430 because it uses SYM_DIFF relocs but it does
+ # not provide a special_function for handling them. If
+ # optimization is enabled then this test passes because
+ # function()'s prologue is eliminated.
+ setup_xfail "msp430-*-*"
+
+ # The undefined test fails on 31 bit s/390 because the address of
+ # the function `this_function_is_not_defined' is stored in the
+ # literal pool of the function. Therefore the line number in the
+ # error message is 8 instead of 9. On 64 bit s/390 this works
+ # because of the new brasl instruction that doesn't need a literal
+ # pool entry.
+ setup_xfail s390-*-*
+
+ # See comments above for Xtensa.
+ setup_xfail xtensa*-*-linux*
+ setup_xfail hppa*64*-*-*
+
+ checkund $ml $testline
}
-set ml "undefined.c:9: undefined reference to `*this_function_is_not_defined'"
-# With targets that use elf/dwarf2, such as the arm-elf
-# toolchain, the code in bfd/elf.c:_bfd_elf_find_nearest_line() is called
-# in order to locate the file name/line number where the undefined
-# reference occurs. Unfortunately this tries to use the dwarf2 debug
-# information held in the .debug_info section. This section contains a series
-# of comp_unit structures, each of which has a low/high address range
-# representing the span of memory locations covered by that structure. The
-# structures also index into other structures held in the .debug_line section
-# and together they can translate memory locations back into file/function/line
-# number addresses in the source code. Since the information about the memory
-# region covered by a comp_unit is only determined at link time, the low/high
-# addresses in the .debug_info section and the line addresses in the .debug_line
-# section are computed by generating relocs against known symbols in the object
-# code.
-#
-# When the undefined reference is detected, the relocs in the dwarf2
-# debug sections have not yet been resolved, so the low/high addresses and the
-# line number address are all set at zero. Thus when _bfd_elf_find_nearest_line()
-# calls _bfd_dwarf2_find_nearest_line() no comp_unit can be found which
-# actually covers the address where the reference occurred, and so
-# _bfd_elf_find_nearest_line() fails.
-#
-# The upshot of all of this, is that the error message reported by the
-# linker, instead of having a source file name & line number as in:
-#
-# undefined.c:9: undefined reference to `this_function_is_not_defined'
-#
-# has an object file & section address instead:
-#
-# undefined.0(.text+0xc): undefined reference to `this_function_is_not_defined'
-#
-# hence the xfails below.
-
-setup_xfail mcore-*-elf
-setup_xfail mep-*-*
-setup_xfail mips-sgi-irix6*
-setup_xfail "sh64-*-*"
-# Fails for the MSP430 because it uses SYM_DIFF relocs but it does
-# not provide a special_function for handling them. If optimization
-# is enabled then this test passes because function()'s prologue is
-# eliminated.
-setup_xfail "msp430-*-*"
-
-# The undefined test fails on 31 bit s/390 because the address of the
-# function `this_function_is_not_defined' is stored in the literal pool of
-# the function. Therefore the line number in the error message is 8 instead
-# of 9. On 64 bit s/390 this works because of the new brasl instruction that
-# doesn't need a literal pool entry.
-setup_xfail s390-*-*
-
-# See comments above for Xtensa.
-setup_xfail xtensa*-*-linux*
-setup_xfail hppa*64*-*-*
-
-checkund $ml $testline
+# Undefined symbols should become dynamic when linking a shared lib.
+set testname "undefined symbols in shared lib"
+
+set asflags ""
+switch -glob $target_triplet {
+ aarch64* -
+ arm* -
+ powerpc64* { set asflags "--defsym BL=1" }
+ powerpc* { set asflags "--defsym BLPLT=1" }
+ hppa* { set asflags "--defsym HPPA=1" }
+ i\[3-7\]86* -
+ x86_64* { set asflags "--defsym CALLPLT=1" }
+}
+
+if { ![is_elf_format] || ![check_shared_lib_support]} then {
+ unsupported $testname
+} elseif {![ld_assemble $as "$asflags $srcdir/$subdir/fundef.s" \
+ tmpdir/fundef.o]} then {
+ fail $testname
+} elseif {![ld_link $ld tmpdir/fundef.so \
+ "-shared --allow-shlib-undefined tmpdir/fundef.o"]} then {
+ setup_xfail tic6x-*-*
+ fail $testname
+} else {
+ if {![is_remote host] && [which $nm] == 0} then {
+ unresolved "$testname (dyn sym)"
+ } else {
+ set exec_output [run_host_cmd "$nm" "-D tmpdir/fundef.so"]
+ set exec_output [prune_warnings $exec_output]
+
+ if { ($asflags == ""
+ || ([regexp ".* undef_fun_typed.*" $exec_output]
+ && [regexp ".* undef_fun_notype.*" $exec_output]))
+ && [regexp ".* undef_data.*" $exec_output]
+ && [regexp ".* undef_pfun.*" $exec_output]
+ && [regexp ".* undef_notype.*" $exec_output]} then {
+ pass "$testname (dyn sym)"
+ } else {
+ fail "$testname (dyn sym)"
+ }
+ }
+
+ global READELF
+ if {![is_remote host] && [which $READELF] == 0} then {
+ unresolved "$testname (dyn reloc)"
+ } else {
+ set exec_output [run_host_cmd "$READELF" "-r tmpdir/fundef.so"]
+ set exec_output [prune_warnings $exec_output]
+
+ # we ought to get two .rel{a}.plt and three .rel{a}.dyn relocs
+ if { ($asflags == "" || [regexp ".* contains 2 .*" $exec_output])
+ && [regexp ".* contains 3 .*" $exec_output]
+ && ![regexp "_NONE" $exec_output]} then {
+ pass "$testname (dyn reloc)"
+ } else {
+ fail "$testname (dyn reloc)"
+ }
+ }
+}