aboutsummaryrefslogtreecommitdiff
path: root/gdb/NEWS
diff options
context:
space:
mode:
Diffstat (limited to 'gdb/NEWS')
-rw-r--r--gdb/NEWS1611
1 files changed, 1611 insertions, 0 deletions
diff --git a/gdb/NEWS b/gdb/NEWS
new file mode 100644
index 0000000..e6aaba3
--- /dev/null
+++ b/gdb/NEWS
@@ -0,0 +1,1611 @@
+ What has changed in GDB?
+ (Organized release by release)
+
+*** Changes in GDB-4.18:
+
+* New native configurations
+
+HP-UX 10.20 hppa*-*-hpux10.20
+HP-UX 11.x hppa*-*-hpux11.0*
+M68K Linux m68*-*-linux*
+
+* New targets
+
+Fujitsu FR30 fr30-*-elf*
+Intel StrongARM strongarm-*-*
+Mitsubishi D30V d30v-*-*
+
+* OBSOLETE configurations
+
+Gould PowerNode, NP1 np1-*-*, pn-*-*
+
+Configurations that have been declared obsolete will be commented out,
+but the code will be left in place. If there is no activity to revive
+these configurations before the next release of GDB, the sources will
+be permanently REMOVED.
+
+* ANSI/ISO C
+
+As a compatibility experiment, GDB's source files buildsym.h and
+buildsym.c have been converted to pure standard C, no longer
+containing any K&R compatibility code. We believe that all systems in
+use today either come with a standard C compiler, or have a GCC port
+available. If this is not true, please report the affected
+configuration to bug-gdb@gnu.org immediately. See the README file for
+information about getting a standard C compiler if you don't have one
+already.
+
+* Readline 2.2
+
+GDB now uses readline 2.2.
+
+* set extension-language
+
+You can now control the mapping between filename extensions and source
+languages by using the `set extension-language' command. For instance,
+you can ask GDB to treat .c files as C++ by saying
+ set extension-language .c c++
+The command `info extensions' lists all of the recognized extensions
+and their associated languages.
+
+* Setting processor type for PowerPC and RS/6000
+
+When GDB is configured for a powerpc*-*-* or an rs6000*-*-* target,
+you can use the `set processor' command to specify what variant of the
+PowerPC family you are debugging. The command
+
+ set processor NAME
+
+sets the PowerPC/RS6000 variant to NAME. GDB knows about the
+following PowerPC and RS6000 variants:
+
+ ppc-uisa PowerPC UISA - a PPC processor as viewed by user-level code
+ rs6000 IBM RS6000 ("POWER") architecture, user-level view
+ 403 IBM PowerPC 403
+ 403GC IBM PowerPC 403GC
+ 505 Motorola PowerPC 505
+ 860 Motorola PowerPC 860 or 850
+ 601 Motorola PowerPC 601
+ 602 Motorola PowerPC 602
+ 603 Motorola/IBM PowerPC 603 or 603e
+ 604 Motorola PowerPC 604 or 604e
+ 750 Motorola/IBM PowerPC 750 or 750
+
+At the moment, this command just tells GDB what to name the
+special-purpose processor registers. Since almost all the affected
+registers are inaccessible to user-level programs, this command is
+only useful for remote debugging in its present form.
+
+* HP-UX support
+
+Thanks to a major code donation from Hewlett-Packard, GDB now has much
+more extensive support for HP-UX. Added features include shared
+library support, kernel threads and hardware watchpoints for 11.00,
+support for HP's ANSI C and C++ compilers, and a compatibility mode
+for xdb and dbx commands.
+
+* Catchpoints
+
+HP's donation includes the new concept of catchpoints, which is a
+generalization of the old catch command. On HP-UX, it is now possible
+to catch exec, fork, and vfork, as well as library loading.
+
+This means that the existing catch command has changed; its first
+argument now specifies the type of catch to be set up. See the
+output of "help catch" for a list of catchpoint types.
+
+* Debugging across forks
+
+On HP-UX, you can choose which process to debug when a fork() happens
+in the inferior.
+
+* TUI
+
+HP has donated a curses-based terminal user interface (TUI). To get
+it, build with --enable-tui. Although this can be enabled for any
+configuration, at present it only works for native HP debugging.
+
+* GDB remote protocol additions
+
+A new protocol packet 'X' that writes binary data is now available.
+Default behavior is to try 'X', then drop back to 'M' if the stub
+fails to respond. The settable variable `remotebinarydownload'
+allows explicit control over the use of 'X'.
+
+For 64-bit targets, the memory packets ('M' and 'm') can now contain a
+full 64-bit address. The command
+
+ set remoteaddresssize 32
+
+can be used to revert to the old behaviour. For existing remote stubs
+the change should not be noticed, as the additional address information
+will be discarded.
+
+In order to assist in debugging stubs, you may use the maintenance
+command `packet' to send any text string to the stub. For instance,
+
+ maint packet heythere
+
+sends the packet "$heythere#<checksum>". Note that it is very easy to
+disrupt a debugging session by sending the wrong packet at the wrong
+time.
+
+The compare-sections command allows you to compare section data on the
+target to what is in the executable file without uploading or
+downloading, by comparing CRC checksums.
+
+* Tracing can collect general expressions
+
+You may now collect general expressions at tracepoints. This requires
+further additions to the target-side stub; see tracepoint.c and
+doc/agentexpr.texi for further details.
+
+* mask-address variable for Mips
+
+For Mips targets, you may control the zeroing of the upper 32 bits of
+a 64-bit address by entering `set mask-address on'. This is mainly
+of interest to users of embedded R4xxx and R5xxx processors.
+
+* Higher serial baud rates
+
+GDB's serial code now allows you to specify baud rates 57600, 115200,
+230400, and 460800 baud. (Note that your host system may not be able
+to achieve all of these rates.)
+
+* i960 simulator
+
+The i960 configuration now includes an initial implementation of a
+builtin simulator, contributed by Jim Wilson.
+
+
+*** Changes in GDB-4.17:
+
+* New native configurations
+
+Alpha GNU/Linux alpha*-*-linux*
+Unixware 2.x i[3456]86-unixware2*
+Irix 6.x mips*-sgi-irix6*
+PowerPC GNU/Linux powerpc-*-linux*
+PowerPC Solaris powerpcle-*-solaris*
+Sparc GNU/Linux sparc-*-linux*
+Motorola sysV68 R3V7.1 m68k-motorola-sysv
+
+* New targets
+
+Argonaut Risc Chip (ARC) arc-*-*
+Hitachi H8/300S h8300*-*-*
+Matsushita MN10200 w/simulator mn10200-*-*
+Matsushita MN10300 w/simulator mn10300-*-*
+MIPS NEC VR4100 mips64*vr4100*{,el}-*-elf*
+MIPS NEC VR5000 mips64*vr5000*{,el}-*-elf*
+MIPS Toshiba TX39 mips64*tx39*{,el}-*-elf*
+Mitsubishi D10V w/simulator d10v-*-*
+Mitsubishi M32R/D w/simulator m32r-*-elf*
+Tsqware Sparclet sparclet-*-*
+NEC V850 w/simulator v850-*-*
+
+* New debugging protocols
+
+ARM with RDI protocol arm*-*-*
+M68K with dBUG monitor m68*-*-{aout,coff,elf}
+DDB and LSI variants of PMON protocol mips*-*-*
+PowerPC with DINK32 monitor powerpc{,le}-*-eabi
+PowerPC with SDS protocol powerpc{,le}-*-eabi
+Macraigor OCD (Wiggler) devices powerpc{,le}-*-eabi
+
+* DWARF 2
+
+All configurations can now understand and use the DWARF 2 debugging
+format. The choice is automatic, if the symbol file contains DWARF 2
+information.
+
+* Java frontend
+
+GDB now includes basic Java language support. This support is
+only useful with Java compilers that produce native machine code.
+
+* solib-absolute-prefix and solib-search-path
+
+For SunOS and SVR4 shared libraries, you may now set the prefix for
+loading absolute shared library symbol files, and the search path for
+locating non-absolute shared library symbol files.
+
+* Live range splitting
+
+GDB can now effectively debug code for which GCC has performed live
+range splitting as part of its optimization. See gdb/doc/LRS for
+more details on the expected format of the stabs information.
+
+* Hurd support
+
+GDB's support for the GNU Hurd, including thread debugging, has been
+updated to work with current versions of the Hurd.
+
+* ARM Thumb support
+
+GDB's ARM target configuration now handles the ARM7T (Thumb) 16-bit
+instruction set. ARM GDB automatically detects when Thumb
+instructions are in use, and adjusts disassembly and backtracing
+accordingly.
+
+* MIPS16 support
+
+GDB's MIPS target configurations now handle the MIP16 16-bit
+instruction set.
+
+* Overlay support
+
+GDB now includes support for overlays; if an executable has been
+linked such that multiple sections are based at the same address, GDB
+will decide which section to use for symbolic info. You can choose to
+control the decision manually, using overlay commands, or implement
+additional target-side support and use "overlay load-target" to bring
+in the overlay mapping. Do "help overlay" for more detail.
+
+* info symbol
+
+The command "info symbol <address>" displays information about
+the symbol at the specified address.
+
+* Trace support
+
+The standard remote protocol now includes an extension that allows
+asynchronous collection and display of trace data. This requires
+extensive support in the target-side debugging stub. Tracing mode
+includes a new interaction mode in GDB and new commands: see the
+file tracepoint.c for more details.
+
+* MIPS simulator
+
+Configurations for embedded MIPS now include a simulator contributed
+by Cygnus Solutions. The simulator supports the instruction sets
+of most MIPS variants.
+
+* Sparc simulator
+
+Sparc configurations may now include the ERC32 simulator contributed
+by the European Space Agency. The simulator is not built into
+Sparc targets by default; configure with --enable-sim to include it.
+
+* set architecture
+
+For target configurations that may include multiple variants of a
+basic architecture (such as MIPS and SH), you may now set the
+architecture explicitly. "set arch" sets, "info arch" lists
+the possible architectures.
+
+*** Changes in GDB-4.16:
+
+* New native configurations
+
+Windows 95, x86 Windows NT i[345]86-*-cygwin32
+M68K NetBSD m68k-*-netbsd*
+PowerPC AIX 4.x powerpc-*-aix*
+PowerPC MacOS powerpc-*-macos*
+PowerPC Windows NT powerpcle-*-cygwin32
+RS/6000 AIX 4.x rs6000-*-aix4*
+
+* New targets
+
+ARM with RDP protocol arm-*-*
+I960 with MON960 i960-*-coff
+MIPS VxWorks mips*-*-vxworks*
+MIPS VR4300 with PMON mips64*vr4300{,el}-*-elf*
+PowerPC with PPCBUG monitor powerpc{,le}-*-eabi*
+Hitachi SH3 sh-*-*
+Matra Sparclet sparclet-*-*
+
+* PowerPC simulator
+
+The powerpc-eabi configuration now includes the PSIM simulator,
+contributed by Andrew Cagney, with assistance from Mike Meissner.
+PSIM is a very elaborate model of the PowerPC, including not only
+basic instruction set execution, but also details of execution unit
+performance and I/O hardware. See sim/ppc/README for more details.
+
+* Solaris 2.5
+
+GDB now works with Solaris 2.5.
+
+* Windows 95/NT native
+
+GDB will now work as a native debugger on Windows 95 and Windows NT.
+To build it from source, you must use the "gnu-win32" environment,
+which uses a DLL to emulate enough of Unix to run the GNU tools.
+Further information, binaries, and sources are available at
+ftp.cygnus.com, under pub/gnu-win32.
+
+* dont-repeat command
+
+If a user-defined command includes the command `dont-repeat', then the
+command will not be repeated if the user just types return. This is
+useful if the command is time-consuming to run, so that accidental
+extra keystrokes don't run the same command many times.
+
+* Send break instead of ^C
+
+The standard remote protocol now includes an option to send a break
+rather than a ^C to the target in order to interrupt it. By default,
+GDB will send ^C; to send a break, set the variable `remotebreak' to 1.
+
+* Remote protocol timeout
+
+The standard remote protocol includes a new variable `remotetimeout'
+that allows you to set the number of seconds before GDB gives up trying
+to read from the target. The default value is 2.
+
+* Automatic tracking of dynamic object loading (HPUX and Solaris only)
+
+By default GDB will automatically keep track of objects as they are
+loaded and unloaded by the dynamic linker. By using the command `set
+stop-on-solib-events 1' you can arrange for GDB to stop the inferior
+when shared library events occur, thus allowing you to set breakpoints
+in shared libraries which are explicitly loaded by the inferior.
+
+Note this feature does not work on hpux8. On hpux9 you must link
+/usr/lib/end.o into your program. This feature should work
+automatically on hpux10.
+
+* Irix 5.x hardware watchpoint support
+
+Irix 5 configurations now support the use of hardware watchpoints.
+
+* Mips protocol "SYN garbage limit"
+
+When debugging a Mips target using the `target mips' protocol, you
+may set the number of characters that GDB will ignore by setting
+the `syn-garbage-limit'. A value of -1 means that GDB will ignore
+every character. The default value is 1050.
+
+* Recording and replaying remote debug sessions
+
+If you set `remotelogfile' to the name of a file, gdb will write to it
+a recording of a remote debug session. This recording may then be
+replayed back to gdb using "gdbreplay". See gdbserver/README for
+details. This is useful when you have a problem with GDB while doing
+remote debugging; you can make a recording of the session and send it
+to someone else, who can then recreate the problem.
+
+* Speedups for remote debugging
+
+GDB includes speedups for downloading and stepping MIPS systems using
+the IDT monitor, fast downloads to the Hitachi SH E7000 emulator,
+and more efficient S-record downloading.
+
+* Memory use reductions and statistics collection
+
+GDB now uses less memory and reports statistics about memory usage.
+Try the `maint print statistics' command, for example.
+
+*** Changes in GDB-4.15:
+
+* Psymtabs for XCOFF
+
+The symbol reader for AIX GDB now uses partial symbol tables. This
+can greatly improve startup time, especially for large executables.
+
+* Remote targets use caching
+
+Remote targets now use a data cache to speed up communication with the
+remote side. The data cache could lead to incorrect results because
+it doesn't know about volatile variables, thus making it impossible to
+debug targets which use memory mapped I/O devices. `set remotecache
+off' turns the the data cache off.
+
+* Remote targets may have threads
+
+The standard remote protocol now includes support for multiple threads
+in the target system, using new protocol commands 'H' and 'T'. See
+gdb/remote.c for details.
+
+* NetROM support
+
+If GDB is configured with `--enable-netrom', then it will include
+support for the NetROM ROM emulator from XLNT Designs. The NetROM
+acts as though it is a bank of ROM on the target board, but you can
+write into it over the network. GDB's support consists only of
+support for fast loading into the emulated ROM; to debug, you must use
+another protocol, such as standard remote protocol. The usual
+sequence is something like
+
+ target nrom <netrom-hostname>
+ load <prog>
+ target remote <netrom-hostname>:1235
+
+* Macintosh host
+
+GDB now includes support for the Apple Macintosh, as a host only. It
+may be run as either an MPW tool or as a standalone application, and
+it can debug through the serial port. All the usual GDB commands are
+available, but to the target command, you must supply "serial" as the
+device type instead of "/dev/ttyXX". See mpw-README in the main
+directory for more information on how to build. The MPW configuration
+scripts */mpw-config.in support only a few targets, and only the
+mips-idt-ecoff target has been tested.
+
+* Autoconf
+
+GDB configuration now uses autoconf. This is not user-visible,
+but does simplify configuration and building.
+
+* hpux10
+
+GDB now supports hpux10.
+
+*** Changes in GDB-4.14:
+
+* New native configurations
+
+x86 FreeBSD i[345]86-*-freebsd
+x86 NetBSD i[345]86-*-netbsd
+NS32k NetBSD ns32k-*-netbsd
+Sparc NetBSD sparc-*-netbsd
+
+* New targets
+
+A29K VxWorks a29k-*-vxworks
+HP PA PRO embedded (WinBond W89K & Oki OP50N) hppa*-*-pro*
+CPU32 EST-300 emulator m68*-*-est*
+PowerPC ELF powerpc-*-elf
+WDC 65816 w65-*-*
+
+* Alpha OSF/1 support for procfs
+
+GDB now supports procfs under OSF/1-2.x and higher, which makes it
+possible to attach to running processes. As the mounting of the /proc
+filesystem is optional on the Alpha, GDB automatically determines
+the availability of /proc during startup. This can lead to problems
+if /proc is unmounted after GDB has been started.
+
+* Arguments to user-defined commands
+
+User commands may accept up to 10 arguments separated by whitespace.
+Arguments are accessed within the user command via $arg0..$arg9. A
+trivial example:
+define adder
+ print $arg0 + $arg1 + $arg2
+
+To execute the command use:
+adder 1 2 3
+
+Defines the command "adder" which prints the sum of its three arguments.
+Note the arguments are text substitutions, so they may reference variables,
+use complex expressions, or even perform inferior function calls.
+
+* New `if' and `while' commands
+
+This makes it possible to write more sophisticated user-defined
+commands. Both commands take a single argument, which is the
+expression to evaluate, and must be followed by the commands to
+execute, one per line, if the expression is nonzero, the list being
+terminated by the word `end'. The `if' command list may include an
+`else' word, which causes the following commands to be executed only
+if the expression is zero.
+
+* Fortran source language mode
+
+GDB now includes partial support for Fortran 77. It will recognize
+Fortran programs and can evaluate a subset of Fortran expressions, but
+variables and functions may not be handled correctly. GDB will work
+with G77, but does not yet know much about symbols emitted by other
+Fortran compilers.
+
+* Better HPUX support
+
+Most debugging facilities now work on dynamic executables for HPPAs
+running hpux9 or later. You can attach to running dynamically linked
+processes, but by default the dynamic libraries will be read-only, so
+for instance you won't be able to put breakpoints in them. To change
+that behavior do the following before running the program:
+
+ adb -w a.out
+ __dld_flags?W 0x5
+ control-d
+
+This will cause the libraries to be mapped private and read-write.
+To revert to the normal behavior, do this:
+
+ adb -w a.out
+ __dld_flags?W 0x4
+ control-d
+
+You cannot set breakpoints or examine data in the library until after
+the library is loaded if the function/data symbols do not have
+external linkage.
+
+GDB can now also read debug symbols produced by the HP C compiler on
+HPPAs (sorry, no C++, Fortran or 68k support).
+
+* Target byte order now dynamically selectable
+
+You can choose which byte order to use with a target system, via the
+commands "set endian big" and "set endian little", and you can see the
+current setting by using "show endian". You can also give the command
+"set endian auto", in which case GDB will use the byte order
+associated with the executable. Currently, only embedded MIPS
+configurations support dynamic selection of target byte order.
+
+* New DOS host serial code
+
+This version uses DPMI interrupts to handle buffered I/O, so you
+no longer need to run asynctsr when debugging boards connected to
+a PC's serial port.
+
+*** Changes in GDB-4.13:
+
+* New "complete" command
+
+This lists all the possible completions for the rest of the line, if it
+were to be given as a command itself. This is intended for use by emacs.
+
+* Trailing space optional in prompt
+
+"set prompt" no longer adds a space for you after the prompt you set. This
+allows you to set a prompt which ends in a space or one that does not.
+
+* Breakpoint hit counts
+
+"info break" now displays a count of the number of times the breakpoint
+has been hit. This is especially useful in conjunction with "ignore"; you
+can ignore a large number of breakpoint hits, look at the breakpoint info
+to see how many times the breakpoint was hit, then run again, ignoring one
+less than that number, and this will get you quickly to the last hit of
+that breakpoint.
+
+* Ability to stop printing at NULL character
+
+"set print null-stop" will cause GDB to stop printing the characters of
+an array when the first NULL is encountered. This is useful when large
+arrays actually contain only short strings.
+
+* Shared library breakpoints
+
+In SunOS 4.x, SVR4, and Alpha OSF/1 configurations, you can now set
+breakpoints in shared libraries before the executable is run.
+
+* Hardware watchpoints
+
+There is a new hardware breakpoint for the watch command for sparclite
+targets. See gdb/sparclite/hw_breakpoint.note.
+
+Hardware watchpoints are also now supported under Linux.
+
+* Annotations
+
+Annotations have been added. These are for use with graphical interfaces,
+and are still experimental. Currently only gdba.el uses these.
+
+* Improved Irix 5 support
+
+GDB now works properly with Irix 5.2.
+
+* Improved HPPA support
+
+GDB now works properly with the latest GCC and GAS.
+
+* New native configurations
+
+Sequent PTX4 i[34]86-sequent-ptx4
+HPPA running OSF/1 hppa*-*-osf*
+Atari TT running SVR4 m68*-*-sysv4*
+RS/6000 LynxOS rs6000-*-lynxos*
+
+* New targets
+
+OS/9000 i[34]86-*-os9k
+MIPS R4000 mips64*{,el}-*-{ecoff,elf}
+Sparc64 sparc64-*-*
+
+* Hitachi SH7000 and E7000-PC ICE support
+
+There is now support for communicating with the Hitachi E7000-PC ICE.
+This is available automatically when GDB is configured for the SH.
+
+* Fixes
+
+As usual, a variety of small fixes and improvements, both generic
+and configuration-specific. See the ChangeLog for more detail.
+
+*** Changes in GDB-4.12:
+
+* Irix 5 is now supported
+
+* HPPA support
+
+GDB-4.12 on the HPPA has a number of changes which make it unable
+to debug the output from the currently released versions of GCC and
+GAS (GCC 2.5.8 and GAS-2.2 or PAGAS-1.36). Until the next major release
+of GCC and GAS, versions of these tools designed to work with GDB-4.12
+can be retrieved via anonymous ftp from jaguar.cs.utah.edu:/dist.
+
+
+*** Changes in GDB-4.11:
+
+* User visible changes:
+
+* Remote Debugging
+
+The "set remotedebug" option is now consistent between the mips remote
+target, remote targets using the gdb-specific protocol, UDI (AMD's
+debug protocol for the 29k) and the 88k bug monitor. It is now an
+integer specifying a debug level (normally 0 or 1, but 2 means more
+debugging info for the mips target).
+
+* DEC Alpha native support
+
+GDB now works on the DEC Alpha. GCC 2.4.5 does not produce usable
+debug info, but GDB works fairly well with the DEC compiler and should
+work with a future GCC release. See the README file for a few
+Alpha-specific notes.
+
+* Preliminary thread implementation
+
+GDB now has preliminary thread support for both SGI/Irix and LynxOS.
+
+* LynxOS native and target support for 386
+
+This release has been hosted on LynxOS 2.2, and also can be configured
+to remotely debug programs running under LynxOS (see gdb/gdbserver/README
+for details).
+
+* Improvements in C++ mangling/demangling.
+
+This release has much better g++ debugging, specifically in name
+mangling/demangling, virtual function calls, print virtual table,
+call methods, ...etc.
+
+*** Changes in GDB-4.10:
+
+ * User visible changes:
+
+Remote debugging using the GDB-specific (`target remote') protocol now
+supports the `load' command. This is only useful if you have some
+other way of getting the stub to the target system, and you can put it
+somewhere in memory where it won't get clobbered by the download.
+
+Filename completion now works.
+
+When run under emacs mode, the "info line" command now causes the
+arrow to point to the line specified. Also, "info line" prints
+addresses in symbolic form (as well as hex).
+
+All vxworks based targets now support a user settable option, called
+vxworks-timeout. This option represents the number of seconds gdb
+should wait for responses to rpc's. You might want to use this if
+your vxworks target is, perhaps, a slow software simulator or happens
+to be on the far side of a thin network line.
+
+ * DEC alpha support
+
+This release contains support for using a DEC alpha as a GDB host for
+cross debugging. Native alpha debugging is not supported yet.
+
+
+*** Changes in GDB-4.9:
+
+ * Testsuite
+
+This is the first GDB release which is accompanied by a matching testsuite.
+The testsuite requires installation of dejagnu, which should be available
+via ftp from most sites that carry GNU software.
+
+ * C++ demangling
+
+'Cfront' style demangling has had its name changed to 'ARM' style, to
+emphasize that it was written from the specifications in the C++ Annotated
+Reference Manual, not necessarily to be compatible with AT&T cfront. Despite
+disclaimers, it still generated too much confusion with users attempting to
+use gdb with AT&T cfront.
+
+ * Simulators
+
+GDB now uses a standard remote interface to a simulator library.
+So far, the library contains simulators for the Zilog Z8001/2, the
+Hitachi H8/300, H8/500 and Super-H.
+
+ * New targets supported
+
+H8/300 simulator h8300-hitachi-hms or h8300hms
+H8/500 simulator h8500-hitachi-hms or h8500hms
+SH simulator sh-hitachi-hms or sh
+Z8000 simulator z8k-zilog-none or z8ksim
+IDT MIPS board over serial line mips-idt-ecoff
+
+Cross-debugging to GO32 targets is supported. It requires a custom
+version of the i386-stub.c module which is integrated with the
+GO32 memory extender.
+
+ * New remote protocols
+
+MIPS remote debugging protocol.
+
+ * New source languages supported
+
+This version includes preliminary support for Chill, a Pascal like language
+used by telecommunications companies. Chill support is also being integrated
+into the GNU compiler, but we don't know when it will be publically available.
+
+
+*** Changes in GDB-4.8:
+
+ * HP Precision Architecture supported
+
+GDB now supports HP PA-RISC machines running HPUX. A preliminary
+version of this support was available as a set of patches from the
+University of Utah. GDB does not support debugging of programs
+compiled with the HP compiler, because HP will not document their file
+format. Instead, you must use GCC (version 2.3.2 or later) and PA-GAS
+(as available from jaguar.cs.utah.edu:/dist/pa-gas.u4.tar.Z).
+
+Many problems in the preliminary version have been fixed.
+
+ * Faster and better demangling
+
+We have improved template demangling and fixed numerous bugs in the GNU style
+demangler. It can now handle type modifiers such as `static' or `const'. Wide
+character types (wchar_t) are now supported. Demangling of each symbol is now
+only done once, and is cached when the symbol table for a file is read in.
+This results in a small increase in memory usage for C programs, a moderate
+increase in memory usage for C++ programs, and a fantastic speedup in
+symbol lookups.
+
+`Cfront' style demangling still doesn't work with AT&T cfront. It was written
+from the specifications in the Annotated Reference Manual, which AT&T's
+compiler does not actually implement.
+
+ * G++ multiple inheritance compiler problem
+
+In the 2.3.2 release of gcc/g++, how the compiler resolves multiple
+inheritance lattices was reworked to properly discover ambiguities. We
+recently found an example which causes this new algorithm to fail in a
+very subtle way, producing bad debug information for those classes.
+The file 'gcc.patch' (in this directory) can be applied to gcc to
+circumvent the problem. A future GCC release will contain a complete
+fix.
+
+The previous G++ debug info problem (mentioned below for the gdb-4.7
+release) is fixed in gcc version 2.3.2.
+
+ * Improved configure script
+
+The `configure' script will now attempt to guess your system type if
+you don't supply a host system type. The old scheme of supplying a
+host system triplet is preferable over using this. All the magic is
+done in the new `config.guess' script. Examine it for details.
+
+We have also brought our configure script much more in line with the FSF's
+version. It now supports the --with-xxx options. In particular,
+`--with-minimal-bfd' can be used to make the GDB binary image smaller.
+The resulting GDB will not be able to read arbitrary object file formats --
+only the format ``expected'' to be used on the configured target system.
+We hope to make this the default in a future release.
+
+ * Documentation improvements
+
+There's new internal documentation on how to modify GDB, and how to
+produce clean changes to the code. We implore people to read it
+before submitting changes.
+
+The GDB manual uses new, sexy Texinfo conditionals, rather than arcane
+M4 macros. The new texinfo.tex is provided in this release. Pre-built
+`info' files are also provided. To build `info' files from scratch,
+you will need the latest `makeinfo' release, which will be available in
+a future texinfo-X.Y release.
+
+*NOTE* The new texinfo.tex can cause old versions of TeX to hang.
+We're not sure exactly which versions have this problem, but it has
+been seen in 3.0. We highly recommend upgrading to TeX version 3.141
+or better. If that isn't possible, there is a patch in
+`texinfo/tex3patch' that will modify `texinfo/texinfo.tex' to work
+around this problem.
+
+ * New features
+
+GDB now supports array constants that can be used in expressions typed in by
+the user. The syntax is `{element, element, ...}'. Ie: you can now type
+`print {1, 2, 3}', and it will build up an array in memory malloc'd in
+the target program.
+
+The new directory `gdb/sparclite' contains a program that demonstrates
+how the sparc-stub.c remote stub runs on a Fujitsu SPARClite processor.
+
+ * New native hosts supported
+
+HP/PA-RISC under HPUX using GNU tools hppa1.1-hp-hpux
+386 CPUs running SCO Unix 3.2v4 i386-unknown-sco3.2v4
+
+ * New targets supported
+
+AMD 29k family via UDI a29k-amd-udi or udi29k
+
+ * New file formats supported
+
+BFD now supports reading HP/PA-RISC executables (SOM file format?),
+HPUX core files, and SCO 3.2v2 core files.
+
+ * Major bug fixes
+
+Attaching to processes now works again; thanks for the many bug reports.
+
+We have also stomped on a bunch of core dumps caused by
+printf_filtered("%s") problems.
+
+We eliminated a copyright problem on the rpc and ptrace header files
+for VxWorks, which was discovered at the last minute during the 4.7
+release. You should now be able to build a VxWorks GDB.
+
+You can now interrupt gdb while an attached process is running. This
+will cause the attached process to stop, and give control back to GDB.
+
+We fixed problems caused by using too many file descriptors
+for reading symbols from object files and libraries. This was
+especially a problem for programs that used many (~100) shared
+libraries.
+
+The `step' command now only enters a subroutine if there is line number
+information for the subroutine. Otherwise it acts like the `next'
+command. Previously, `step' would enter subroutines if there was
+any debugging information about the routine. This avoids problems
+when using `cc -g1' on MIPS machines.
+
+ * Internal improvements
+
+GDB's internal interfaces have been improved to make it easier to support
+debugging of multiple languages in the future.
+
+GDB now uses a common structure for symbol information internally.
+Minimal symbols (derived from linkage symbols in object files), partial
+symbols (from a quick scan of debug information), and full symbols
+contain a common subset of information, making it easier to write
+shared code that handles any of them.
+
+ * New command line options
+
+We now accept --silent as an alias for --quiet.
+
+ * Mmalloc licensing
+
+The memory-mapped-malloc library is now licensed under the GNU Library
+General Public License.
+
+*** Changes in GDB-4.7:
+
+ * Host/native/target split
+
+GDB has had some major internal surgery to untangle the support for
+hosts and remote targets. Now, when you configure GDB for a remote
+target, it will no longer load in all of the support for debugging
+local programs on the host. When fully completed and tested, this will
+ensure that arbitrary host/target combinations are possible.
+
+The primary conceptual shift is to separate the non-portable code in
+GDB into three categories. Host specific code is required any time GDB
+is compiled on that host, regardless of the target. Target specific
+code relates to the peculiarities of the target, but can be compiled on
+any host. Native specific code is everything else: it can only be
+built when the host and target are the same system. Child process
+handling and core file support are two common `native' examples.
+
+GDB's use of /proc for controlling Unix child processes is now cleaner.
+It has been split out into a single module under the `target_ops' vector,
+plus two native-dependent functions for each system that uses /proc.
+
+ * New hosts supported
+
+HP/Apollo 68k (under the BSD domain) m68k-apollo-bsd or apollo68bsd
+386 CPUs running various BSD ports i386-unknown-bsd or 386bsd
+386 CPUs running SCO Unix i386-unknown-scosysv322 or i386sco
+
+ * New targets supported
+
+Fujitsu SPARClite sparclite-fujitsu-none or sparclite
+68030 and CPU32 m68030-*-*, m68332-*-*
+
+ * New native hosts supported
+
+386 CPUs running various BSD ports i386-unknown-bsd or 386bsd
+ (386bsd is not well tested yet)
+386 CPUs running SCO Unix i386-unknown-scosysv322 or sco
+
+ * New file formats supported
+
+BFD now supports COFF files for the Zilog Z8000 microprocessor. It
+supports reading of `a.out.adobe' object files, which are an a.out
+format extended with minimal information about multiple sections.
+
+ * New commands
+
+`show copying' is the same as the old `info copying'.
+`show warranty' is the same as `info warrantee'.
+These were renamed for consistency. The old commands continue to work.
+
+`info handle' is a new alias for `info signals'.
+
+You can now define pre-command hooks, which attach arbitrary command
+scripts to any command. The commands in the hook will be executed
+prior to the user's command. You can also create a hook which will be
+executed whenever the program stops. See gdb.texinfo.
+
+ * C++ improvements
+
+We now deal with Cfront style name mangling, and can even extract type
+info from mangled symbols. GDB can automatically figure out which
+symbol mangling style your C++ compiler uses.
+
+Calling of methods and virtual functions has been improved as well.
+
+ * Major bug fixes
+
+The crash that occured when debugging Sun Ansi-C compiled binaries is
+fixed. This was due to mishandling of the extra N_SO stabs output
+by the compiler.
+
+We also finally got Ultrix 4.2 running in house, and fixed core file
+support, with help from a dozen people on the net.
+
+John M. Farrell discovered that the reason that single-stepping was so
+slow on all of the Mips based platforms (primarily SGI and DEC) was
+that we were trying to demangle and lookup a symbol used for internal
+purposes on every instruction that was being stepped through. Changing
+the name of that symbol so that it couldn't be mistaken for a C++
+mangled symbol sped things up a great deal.
+
+Rich Pixley sped up symbol lookups in general by getting much smarter
+about when C++ symbol mangling is necessary. This should make symbol
+completion (TAB on the command line) much faster. It's not as fast as
+we'd like, but it's significantly faster than gdb-4.6.
+
+ * AMD 29k support
+
+A new user controllable variable 'call_scratch_address' can
+specify the location of a scratch area to be used when GDB
+calls a function in the target. This is necessary because the
+usual method of putting the scratch area on the stack does not work
+in systems that have separate instruction and data spaces.
+
+We integrated changes to support the 29k UDI (Universal Debugger
+Interface), but discovered at the last minute that we didn't have all
+of the appropriate copyright paperwork. We are working with AMD to
+resolve this, and hope to have it available soon.
+
+ * Remote interfaces
+
+We have sped up the remote serial line protocol, especially for targets
+with lots of registers. It now supports a new `expedited status' ('T')
+message which can be used in place of the existing 'S' status message.
+This allows the remote stub to send only the registers that GDB
+needs to make a quick decision about single-stepping or conditional
+breakpoints, eliminating the need to fetch the entire register set for
+each instruction being stepped through.
+
+The GDB remote serial protocol now implements a write-through cache for
+registers, only re-reading the registers if the target has run.
+
+There is also a new remote serial stub for SPARC processors. You can
+find it in gdb-4.7/gdb/sparc-stub.c. This was written to support the
+Fujitsu SPARClite processor, but will run on any stand-alone SPARC
+processor with a serial port.
+
+ * Configuration
+
+Configure.in files have become much easier to read and modify. A new
+`table driven' format makes it more obvious what configurations are
+supported, and what files each one uses.
+
+ * Library changes
+
+There is a new opcodes library which will eventually contain all of the
+disassembly routines and opcode tables. At present, it only contains
+Sparc and Z8000 routines. This will allow the assembler, debugger, and
+disassembler (binutils/objdump) to share these routines.
+
+The libiberty library is now copylefted under the GNU Library General
+Public License. This allows more liberal use, and was done so libg++
+can use it. This makes no difference to GDB, since the Library License
+grants all the rights from the General Public License.
+
+ * Documentation
+
+The file gdb-4.7/gdb/doc/stabs.texinfo is a (relatively) complete
+reference to the stabs symbol info used by the debugger. It is (as far
+as we know) the only published document on this fascinating topic. We
+encourage you to read it, compare it to the stabs information on your
+system, and send improvements on the document in general (to
+bug-gdb@prep.ai.mit.edu).
+
+And, of course, many bugs have been fixed.
+
+
+*** Changes in GDB-4.6:
+
+ * Better support for C++ function names
+
+GDB now accepts as input the "demangled form" of C++ overloaded function
+names and member function names, and can do command completion on such names
+(using TAB, TAB-TAB, and ESC-?). The names have to be quoted with a pair of
+single quotes. Examples are 'func (int, long)' and 'obj::operator==(obj&)'.
+Make use of command completion, it is your friend.
+
+GDB also now accepts a variety of C++ mangled symbol formats. They are
+the GNU g++ style, the Cfront (ARM) style, and the Lucid (lcc) style.
+You can tell GDB which format to use by doing a 'set demangle-style {gnu,
+lucid, cfront, auto}'. 'gnu' is the default. Do a 'set demangle-style foo'
+for the list of formats.
+
+ * G++ symbol mangling problem
+
+Recent versions of gcc have a bug in how they emit debugging information for
+C++ methods (when using dbx-style stabs). The file 'gcc.patch' (in this
+directory) can be applied to gcc to fix the problem. Alternatively, if you
+can't fix gcc, you can #define GCC_MANGLE_BUG when compling gdb/symtab.c. The
+usual symptom is difficulty with setting breakpoints on methods. GDB complains
+about the method being non-existent. (We believe that version 2.2.2 of GCC has
+this problem.)
+
+ * New 'maintenance' command
+
+All of the commands related to hacking GDB internals have been moved out of
+the main command set, and now live behind the 'maintenance' command. This
+can also be abbreviated as 'mt'. The following changes were made:
+
+ dump-me -> maintenance dump-me
+ info all-breakpoints -> maintenance info breakpoints
+ printmsyms -> maintenance print msyms
+ printobjfiles -> maintenance print objfiles
+ printpsyms -> maintenance print psymbols
+ printsyms -> maintenance print symbols
+
+The following commands are new:
+
+ maintenance demangle Call internal GDB demangler routine to
+ demangle a C++ link name and prints the result.
+ maintenance print type Print a type chain for a given symbol
+
+ * Change to .gdbinit file processing
+
+We now read the $HOME/.gdbinit file before processing the argv arguments
+(e.g. reading symbol files or core files). This allows global parameters to
+be set, which will apply during the symbol reading. The ./.gdbinit is still
+read after argv processing.
+
+ * New hosts supported
+
+Solaris-2.0 !!! sparc-sun-solaris2 or sun4sol2
+
+Linux support i386-unknown-linux or linux
+
+We are also including code to support the HP/PA running BSD and HPUX. This
+is almost guaranteed not to work, as we didn't have time to test or build it
+for this release. We are including it so that the more adventurous (or
+masochistic) of you can play with it. We also had major problems with the
+fact that the compiler that we got from HP doesn't support the -g option.
+It costs extra.
+
+ * New targets supported
+
+Hitachi H8/300 h8300-hitachi-hms or h8300hms
+
+ * More smarts about finding #include files
+
+GDB now remembers the compilation directory for all include files, and for
+all files from which C is generated (like yacc and lex sources). This
+greatly improves GDB's ability to find yacc/lex sources, and include files,
+especially if you are debugging your program from a directory different from
+the one that contains your sources.
+
+We also fixed a bug which caused difficulty with listing and setting
+breakpoints in include files which contain C code. (In the past, you had to
+try twice in order to list an include file that you hadn't looked at before.)
+
+ * Interesting infernals change
+
+GDB now deals with arbitrary numbers of sections, where the symbols for each
+section must be relocated relative to that section's landing place in the
+target's address space. This work was needed to support ELF with embedded
+stabs used by Solaris-2.0.
+
+ * Bug fixes (of course!)
+
+There have been loads of fixes for the following things:
+ mips, rs6000, 29k/udi, m68k, g++, type handling, elf/dwarf, m88k,
+ i960, stabs, DOS(GO32), procfs, etc...
+
+See the ChangeLog for details.
+
+*** Changes in GDB-4.5:
+
+ * New machines supported (host and target)
+
+IBM RS6000 running AIX rs6000-ibm-aix or rs6000
+
+SGI Irix-4.x mips-sgi-irix4 or iris4
+
+ * New malloc package
+
+GDB now uses a new memory manager called mmalloc, based on gmalloc.
+Mmalloc is capable of handling mutiple heaps of memory. It is also
+capable of saving a heap to a file, and then mapping it back in later.
+This can be used to greatly speedup the startup of GDB by using a
+pre-parsed symbol table which lives in a mmalloc managed heap. For
+more details, please read mmalloc/mmalloc.texi.
+
+ * info proc
+
+The 'info proc' command (SVR4 only) has been enhanced quite a bit. See
+'help info proc' for details.
+
+ * MIPS ecoff symbol table format
+
+The code that reads MIPS symbol table format is now supported on all hosts.
+Thanks to MIPS for releasing the sym.h and symconst.h files to make this
+possible.
+
+ * File name changes for MS-DOS
+
+Many files in the config directories have been renamed to make it easier to
+support GDB on MS-DOSe systems (which have very restrictive file name
+conventions :-( ). MS-DOSe host support (under DJ Delorie's GO32
+environment) is close to working but has some remaining problems. Note
+that debugging of DOS programs is not supported, due to limitations
+in the ``operating system'', but it can be used to host cross-debugging.
+
+ * Cross byte order fixes
+
+Many fixes have been made to support cross debugging of Sparc and MIPS
+targets from hosts whose byte order differs.
+
+ * New -mapped and -readnow options
+
+If memory-mapped files are available on your system through the 'mmap'
+system call, you can use the -mapped option on the `file' or
+`symbol-file' commands to cause GDB to write the symbols from your
+program into a reusable file. If the program you are debugging is
+called `/path/fred', the mapped symbol file will be `./fred.syms'.
+Future GDB debugging sessions will notice the presence of this file,
+and will quickly map in symbol information from it, rather than reading
+the symbol table from the executable program. Using the '-mapped'
+option in a GDB `file' or `symbol-file' command has the same effect as
+starting GDB with the '-mapped' command-line option.
+
+You can cause GDB to read the entire symbol table immediately by using
+the '-readnow' option with any of the commands that load symbol table
+information (or on the GDB command line). This makes the command
+slower, but makes future operations faster.
+
+The -mapped and -readnow options are typically combined in order to
+build a `fred.syms' file that contains complete symbol information.
+A simple GDB invocation to do nothing but build a `.syms' file for future
+use is:
+
+ gdb -batch -nx -mapped -readnow programname
+
+The `.syms' file is specific to the host machine on which GDB is run.
+It holds an exact image of GDB's internal symbol table. It cannot be
+shared across multiple host platforms.
+
+ * longjmp() handling
+
+GDB is now capable of stepping and nexting over longjmp(), _longjmp(), and
+siglongjmp() without losing control. This feature has not yet been ported to
+all systems. It currently works on many 386 platforms, all MIPS-based
+platforms (SGI, DECstation, etc), and Sun3/4.
+
+ * Solaris 2.0
+
+Preliminary work has been put in to support the new Solaris OS from Sun. At
+this time, it can control and debug processes, but it is not capable of
+reading symbols.
+
+ * Bug fixes
+
+As always, many many bug fixes. The major areas were with g++, and mipsread.
+People using the MIPS-based platforms should experience fewer mysterious
+crashes and trashed symbol tables.
+
+*** Changes in GDB-4.4:
+
+ * New machines supported (host and target)
+
+SCO Unix on i386 IBM PC clones i386-sco-sysv or i386sco
+ (except core files)
+BSD Reno on Vax vax-dec-bsd
+Ultrix on Vax vax-dec-ultrix
+
+ * New machines supported (target)
+
+AMD 29000 embedded, using EBMON a29k-none-none
+
+ * C++ support
+
+GDB continues to improve its handling of C++. `References' work better.
+The demangler has also been improved, and now deals with symbols mangled as
+per the Annotated C++ Reference Guide.
+
+GDB also now handles `stabs' symbol information embedded in MIPS
+`ecoff' symbol tables. Since the ecoff format was not easily
+extensible to handle new languages such as C++, this appeared to be a
+good way to put C++ debugging info into MIPS binaries. This option
+will be supported in the GNU C compiler, version 2, when it is
+released.
+
+ * New features for SVR4
+
+GDB now handles SVR4 shared libraries, in the same fashion as SunOS
+shared libraries. Debugging dynamically linked programs should present
+only minor differences from debugging statically linked programs.
+
+The `info proc' command will print out information about any process
+on an SVR4 system (including the one you are debugging). At the moment,
+it prints the address mappings of the process.
+
+If you bring up GDB on another SVR4 system, please send mail to
+bug-gdb@prep.ai.mit.edu to let us know what changes were reqired (if any).
+
+ * Better dynamic linking support in SunOS
+
+Reading symbols from shared libraries which contain debugging symbols
+now works properly. However, there remain issues such as automatic
+skipping of `transfer vector' code during function calls, which
+make it harder to debug code in a shared library, than to debug the
+same code linked statically.
+
+ * New Getopt
+
+GDB is now using the latest `getopt' routines from the FSF. This
+version accepts the -- prefix for options with long names. GDB will
+continue to accept the old forms (-option and +option) as well.
+Various single letter abbreviations for options have been explicity
+added to the option table so that they won't get overshadowed in the
+future by other options that begin with the same letter.
+
+ * Bugs fixed
+
+The `cleanup_undefined_types' bug that many of you noticed has been squashed.
+Many assorted bugs have been handled. Many more remain to be handled.
+See the various ChangeLog files (primarily in gdb and bfd) for details.
+
+
+*** Changes in GDB-4.3:
+
+ * New machines supported (host and target)
+
+Amiga 3000 running Amix m68k-cbm-svr4 or amix
+NCR 3000 386 running SVR4 i386-ncr-svr4 or ncr3000
+Motorola Delta 88000 running Sys V m88k-motorola-sysv or delta88
+
+ * Almost SCO Unix support
+
+We had hoped to support:
+SCO Unix on i386 IBM PC clones i386-sco-sysv or i386sco
+(except for core file support), but we discovered very late in the release
+that it has problems with process groups that render gdb unusable. Sorry
+about that. I encourage people to fix it and post the fixes.
+
+ * Preliminary ELF and DWARF support
+
+GDB can read ELF object files on System V Release 4, and can handle
+debugging records for C, in DWARF format, in ELF files. This support
+is preliminary. If you bring up GDB on another SVR4 system, please
+send mail to bug-gdb@prep.ai.mit.edu to let us know what changes were
+reqired (if any).
+
+ * New Readline
+
+GDB now uses the latest `readline' library. One user-visible change
+is that two tabs will list possible command completions, which previously
+required typing M-? (meta-question mark, or ESC ?).
+
+ * Bugs fixed
+
+The `stepi' bug that many of you noticed has been squashed.
+Many bugs in C++ have been handled. Many more remain to be handled.
+See the various ChangeLog files (primarily in gdb and bfd) for details.
+
+ * State of the MIPS world (in case you wondered):
+
+GDB can understand the symbol tables emitted by the compilers
+supplied by most vendors of MIPS-based machines, including DEC. These
+symbol tables are in a format that essentially nobody else uses.
+
+Some versions of gcc come with an assembler post-processor called
+mips-tfile. This program is required if you want to do source-level
+debugging of gcc-compiled programs. I believe FSF does not ship
+mips-tfile with gcc version 1, but it will eventually come with gcc
+version 2.
+
+Debugging of g++ output remains a problem. g++ version 1.xx does not
+really support it at all. (If you're lucky, you should be able to get
+line numbers and stack traces to work, but no parameters or local
+variables.) With some work it should be possible to improve the
+situation somewhat.
+
+When gcc version 2 is released, you will have somewhat better luck.
+However, even then you will get confusing results for inheritance and
+methods.
+
+We will eventually provide full debugging of g++ output on
+DECstations. This will probably involve some kind of stabs-in-ecoff
+encapulation, but the details have not been worked out yet.
+
+
+*** Changes in GDB-4.2:
+
+ * Improved configuration
+
+Only one copy of `configure' exists now, and it is not self-modifying.
+Porting BFD is simpler.
+
+ * Stepping improved
+
+The `step' and `next' commands now only stop at the first instruction
+of a source line. This prevents the multiple stops that used to occur
+in switch statements, for-loops, etc. `Step' continues to stop if a
+function that has debugging information is called within the line.
+
+ * Bug fixing
+
+Lots of small bugs fixed. More remain.
+
+ * New host supported (not target)
+
+Intel 386 PC clone running Mach i386-none-mach
+
+
+*** Changes in GDB-4.1:
+
+ * Multiple source language support
+
+GDB now has internal scaffolding to handle several source languages.
+It determines the type of each source file from its filename extension,
+and will switch expression parsing and number formatting to match the
+language of the function in the currently selected stack frame.
+You can also specifically set the language to be used, with
+`set language c' or `set language modula-2'.
+
+ * GDB and Modula-2
+
+GDB now has preliminary support for the GNU Modula-2 compiler,
+currently under development at the State University of New York at
+Buffalo. Development of both GDB and the GNU Modula-2 compiler will
+continue through the fall of 1991 and into 1992.
+
+Other Modula-2 compilers are currently not supported, and attempting to
+debug programs compiled with them will likely result in an error as the
+symbol table is read. Feel free to work on it, though!
+
+There are hooks in GDB for strict type checking and range checking,
+in the `Modula-2 philosophy', but they do not currently work.
+
+ * set write on/off
+
+GDB can now write to executable and core files (e.g. patch
+a variable's value). You must turn this switch on, specify
+the file ("exec foo" or "core foo"), *then* modify it, e.g.
+by assigning a new value to a variable. Modifications take
+effect immediately.
+
+ * Automatic SunOS shared library reading
+
+When you run your program, GDB automatically determines where its
+shared libraries (if any) have been loaded, and reads their symbols.
+The `share' command is no longer needed. This also works when
+examining core files.
+
+ * set listsize
+
+You can specify the number of lines that the `list' command shows.
+The default is 10.
+
+ * New machines supported (host and target)
+
+SGI Iris (MIPS) running Irix V3: mips-sgi-irix or iris
+Sony NEWS (68K) running NEWSOS 3.x: m68k-sony-sysv or news
+Ultracomputer (29K) running Sym1: a29k-nyu-sym1 or ultra3
+
+ * New hosts supported (not targets)
+
+IBM RT/PC: romp-ibm-aix or rtpc
+
+ * New targets supported (not hosts)
+
+AMD 29000 embedded with COFF a29k-none-coff
+AMD 29000 embedded with a.out a29k-none-aout
+Ultracomputer remote kernel debug a29k-nyu-kern
+
+ * New remote interfaces
+
+AMD 29000 Adapt
+AMD 29000 Minimon
+
+
+*** Changes in GDB-4.0:
+
+ * New Facilities
+
+Wide output is wrapped at good places to make the output more readable.
+
+Gdb now supports cross-debugging from a host machine of one type to a
+target machine of another type. Communication with the target system
+is over serial lines. The ``target'' command handles connecting to the
+remote system; the ``load'' command will download a program into the
+remote system. Serial stubs for the m68k and i386 are provided. Gdb
+also supports debugging of realtime processes running under VxWorks,
+using SunRPC Remote Procedure Calls over TCP/IP to talk to a debugger
+stub on the target system.
+
+New CPUs supported include the AMD 29000 and Intel 960.
+
+GDB now reads object files and symbol tables via a ``binary file''
+library, which allows a single copy of GDB to debug programs of multiple
+object file types such as a.out and coff.
+
+There is now a GDB reference card in "doc/refcard.tex". (Make targets
+refcard.dvi and refcard.ps are available to format it).
+
+
+ * Control-Variable user interface simplified
+
+All variables that control the operation of the debugger can be set
+by the ``set'' command, and displayed by the ``show'' command.
+
+For example, ``set prompt new-gdb=>'' will change your prompt to new-gdb=>.
+``Show prompt'' produces the response:
+Gdb's prompt is new-gdb=>.
+
+What follows are the NEW set commands. The command ``help set'' will
+print a complete list of old and new set commands. ``help set FOO''
+will give a longer description of the variable FOO. ``show'' will show
+all of the variable descriptions and their current settings.
+
+confirm on/off: Enables warning questions for operations that are
+ hard to recover from, e.g. rerunning the program while
+ it is already running. Default is ON.
+
+editing on/off: Enables EMACS style command line editing
+ of input. Previous lines can be recalled with
+ control-P, the current line can be edited with control-B,
+ you can search for commands with control-R, etc.
+ Default is ON.
+
+history filename NAME: NAME is where the gdb command history
+ will be stored. The default is .gdb_history,
+ or the value of the environment variable
+ GDBHISTFILE.
+
+history size N: The size, in commands, of the command history. The
+ default is 256, or the value of the environment variable
+ HISTSIZE.
+
+history save on/off: If this value is set to ON, the history file will
+ be saved after exiting gdb. If set to OFF, the
+ file will not be saved. The default is OFF.
+
+history expansion on/off: If this value is set to ON, then csh-like
+ history expansion will be performed on
+ command line input. The default is OFF.
+
+radix N: Sets the default radix for input and output. It can be set
+ to 8, 10, or 16. Note that the argument to "radix" is interpreted
+ in the current radix, so "set radix 10" is always a no-op.
+
+height N: This integer value is the number of lines on a page. Default
+ is 24, the current `stty rows'' setting, or the ``li#''
+ setting from the termcap entry matching the environment
+ variable TERM.
+
+width N: This integer value is the number of characters on a line.
+ Default is 80, the current `stty cols'' setting, or the ``co#''
+ setting from the termcap entry matching the environment
+ variable TERM.
+
+Note: ``set screensize'' is obsolete. Use ``set height'' and
+``set width'' instead.
+
+print address on/off: Print memory addresses in various command displays,
+ such as stack traces and structure values. Gdb looks
+ more ``symbolic'' if you turn this off; it looks more
+ ``machine level'' with it on. Default is ON.
+
+print array on/off: Prettyprint arrays. New convenient format! Default
+ is OFF.
+
+print demangle on/off: Print C++ symbols in "source" form if on,
+ "raw" form if off.
+
+print asm-demangle on/off: Same, for assembler level printouts
+ like instructions.
+
+print vtbl on/off: Prettyprint C++ virtual function tables. Default is OFF.
+
+
+ * Support for Epoch Environment.
+
+The epoch environment is a version of Emacs v18 with windowing. One
+new command, ``inspect'', is identical to ``print'', except that if you
+are running in the epoch environment, the value is printed in its own
+window.
+
+
+ * Support for Shared Libraries
+
+GDB can now debug programs and core files that use SunOS shared libraries.
+Symbols from a shared library cannot be referenced
+before the shared library has been linked with the program (this
+happens after you type ``run'' and before the function main() is entered).
+At any time after this linking (including when examining core files
+from dynamically linked programs), gdb reads the symbols from each
+shared library when you type the ``sharedlibrary'' command.
+It can be abbreviated ``share''.
+
+sharedlibrary REGEXP: Load shared object library symbols for files
+ matching a unix regular expression. No argument
+ indicates to load symbols for all shared libraries.
+
+info sharedlibrary: Status of loaded shared libraries.
+
+
+ * Watchpoints
+
+A watchpoint stops execution of a program whenever the value of an
+expression changes. Checking for this slows down execution
+tremendously whenever you are in the scope of the expression, but is
+quite useful for catching tough ``bit-spreader'' or pointer misuse
+problems. Some machines such as the 386 have hardware for doing this
+more quickly, and future versions of gdb will use this hardware.
+
+watch EXP: Set a watchpoint (breakpoint) for an expression.
+
+info watchpoints: Information about your watchpoints.
+
+delete N: Deletes watchpoint number N (same as breakpoints).
+disable N: Temporarily turns off watchpoint number N (same as breakpoints).
+enable N: Re-enables watchpoint number N (same as breakpoints).
+
+
+ * C++ multiple inheritance
+
+When used with a GCC version 2 compiler, GDB supports multiple inheritance
+for C++ programs.
+
+ * C++ exception handling
+
+Gdb now supports limited C++ exception handling. Besides the existing
+ability to breakpoint on an exception handler, gdb can breakpoint on
+the raising of an exception (before the stack is peeled back to the
+handler's context).
+
+catch FOO: If there is a FOO exception handler in the dynamic scope,
+ set a breakpoint to catch exceptions which may be raised there.
+ Multiple exceptions (``catch foo bar baz'') may be caught.
+
+info catch: Lists all exceptions which may be caught in the
+ current stack frame.
+
+
+ * Minor command changes
+
+The command ``call func (arg, arg, ...)'' now acts like the print
+command, except it does not print or save a value if the function's result
+is void. This is similar to dbx usage.
+
+The ``up'' and ``down'' commands now always print the frame they end up
+at; ``up-silently'' and `down-silently'' can be used in scripts to change
+frames without printing.
+
+ * New directory command
+
+'dir' now adds directories to the FRONT of the source search path.
+The path starts off empty. Source files that contain debug information
+about the directory in which they were compiled can be found even
+with an empty path; Sun CC and GCC include this information. If GDB can't
+find your source file in the current directory, type "dir .".
+
+ * Configuring GDB for compilation
+
+For normal use, type ``./configure host''. See README or gdb.texinfo
+for more details.
+
+GDB now handles cross debugging. If you are remotely debugging between
+two different machines, type ``./configure host -target=targ''.
+Host is the machine where GDB will run; targ is the machine
+where the program that you are debugging will run.