aboutsummaryrefslogtreecommitdiff
path: root/gdb/NEWS
diff options
context:
space:
mode:
Diffstat (limited to 'gdb/NEWS')
-rw-r--r--gdb/NEWS1548
1 files changed, 0 insertions, 1548 deletions
diff --git a/gdb/NEWS b/gdb/NEWS
deleted file mode 100644
index a1afb60..0000000
--- a/gdb/NEWS
+++ /dev/null
@@ -1,1548 +0,0 @@
- What has changed in GDB?
- (Organized release by release)
-
-*** Changes since GDB-4.17:
-
-* New native configurations
-
-HP-UX 10.20 hppa*-*-hpux10.20
-HP-UX 11.x hppa*-*-hpux11.0*
-M68K Linux m68*-*-linux*
-
-* New targets
-
-Fujitsu FR30 fr30-*-elf*
-Mitsubishi D30V d30v-*-*
-
-* OBSOLETE configurations
-
-Gould PowerNode, NP1 np1-*-*, pn-*-*
-
-Configurations that have been declared obsolete will be commented out,
-but the code will be left in place. If there is no activity to revive
-these configurations before the next release of GDB, the sources will
-be permanently REMOVED.
-
-* Readline 2.2
-
-GDB now uses readline 2.2.
-
-** The PowerPC and RS6000 targets now have a `set processor' command.
-
-When GDB is configured for a powerpc*-*-* or an rs6000*-*-* target,
-you can use the `set processor' command to specify what variant of the
-PowerPC family you are debugging. The command
-
- set processor NAME
-
-sets the PowerPC/RS6000 variant to NAME. GDB knows about the
-following PowerPC and RS6000 variants:
-
- ppc-uisa PowerPC UISA - a PPC processor as viewed by user-level code
- rs6000 IBM RS6000 ("POWER") architecture, user-level view
- 403 IBM PowerPC 403
- 403GC IBM PowerPC 403GC
- 505 Motorola PowerPC 505
- 860 Motorola PowerPC 860 or 850
- 601 Motorola PowerPC 601
- 602 Motorola PowerPC 602
- 603 Motorola/IBM PowerPC 603 or 603e
- 604 Motorola PowerPC 604 or 604e
- 750 Motorola/IBM PowerPC 750 or 750
-
-At the moment, this command just tells GDB what to name the
-special-purpose processor registers. Since almost all the affected
-registers are inaccessible to user-level programs, this command is
-only useful for remote debugging in its present form.
-
-* HP-UX Support
-
-Thanks to a major code donation from HP, GDB now has much more
-extensive support for HP-UX. Added features include shared library
-support, kernel threads and hardware watchpoints for 11.00, support
-for HP's ANSI C and C++ compilers, and compatibility mode for xdb
-commands.
-
-* Catchpoints
-
-HP's donation includes the new concept of catchpoints, which is a
-generalization of the old catch command. On HP-UX, it is now possible
-to catch exec, fork, and vfork, as well as library loading.
-
-* Debugging Across Forks
-
-On HP-UX, you can choose which process to debug when a fork() happens
-in the inferior.
-
-* TUI
-
-HP has donated a curses-based terminal user interface (TUI). To get
-it, build with --enable-tui.
-
-* GDB Remote protocol
-
-A new protocol packet 'X' that writes binary data is now available.
-Default behavior is to try 'X', then drop back to 'M' if the stub
-fails to respond. The settable variable `remotebinarydownload'
-allows explicit control over the use of 'X'.
-
-For 64 bit targets, the memory packets ("M" and "m") can now contain a
-full 64 bit address. The class-obscure gdb command:
- set targetaddresssize 32
-can be used to revert to the old behavour. For existing remote stubs
-the change should not be noticed as the additional address information
-will be discarded.
-
-* Changes to particular targets
-
-*** Changes in GDB-4.17:
-
-* New native configurations
-
-Alpha GNU/Linux alpha*-*-linux*
-Unixware 2.x i[3456]86-unixware2*
-Irix 6.x mips*-sgi-irix6*
-PowerPC GNU/Linux powerpc-*-linux*
-PowerPC Solaris powerpcle-*-solaris*
-Sparc GNU/Linux sparc-*-linux*
-Motorola sysV68 R3V7.1 m68k-motorola-sysv
-
-* New targets
-
-Argonaut Risc Chip (ARC) arc-*-*
-Hitachi H8/300S h8300*-*-*
-Matsushita MN10200 w/simulator mn10200-*-*
-Matsushita MN10300 w/simulator mn10300-*-*
-MIPS NEC VR4100 mips64*vr4100*{,el}-*-elf*
-MIPS NEC VR5000 mips64*vr5000*{,el}-*-elf*
-MIPS Toshiba TX39 mips64*tx39*{,el}-*-elf*
-Mitsubishi D10V w/simulator d10v-*-*
-Mitsubishi M32R/D w/simulator m32r-*-elf*
-Tsqware Sparclet sparclet-*-*
-NEC V850 w/simulator v850-*-*
-
-* New debugging protocols
-
-ARM with RDI protocol arm*-*-*
-M68K with dBUG monitor m68*-*-{aout,coff,elf}
-DDB and LSI variants of PMON protocol mips*-*-*
-PowerPC with DINK32 monitor powerpc{,le}-*-eabi
-PowerPC with SDS protocol powerpc{,le}-*-eabi
-Macraigor OCD (Wiggler) devices powerpc{,le}-*-eabi
-
-* DWARF 2
-
-All configurations can now understand and use the DWARF 2 debugging
-format. The choice is automatic, if the symbol file contains DWARF 2
-information.
-
-* Java frontend
-
-GDB now includes basic Java language support. This support is
-only useful with Java compilers that produce native machine code.
-
-* solib-absolute-prefix and solib-search-path
-
-For SunOS and SVR4 shared libraries, you may now set the prefix for
-loading absolute shared library symbol files, and the search path for
-locating non-absolute shared library symbol files.
-
-* Live range splitting
-
-GDB can now effectively debug code for which GCC has performed live
-range splitting as part of its optimization. See gdb/doc/LRS for
-more details on the expected format of the stabs information.
-
-* Hurd support
-
-GDB's support for the GNU Hurd, including thread debugging, has been
-updated to work with current versions of the Hurd.
-
-* ARM Thumb support
-
-GDB's ARM target configuration now handles the ARM7T (Thumb) 16-bit
-instruction set. ARM GDB automatically detects when Thumb
-instructions are in use, and adjusts disassembly and backtracing
-accordingly.
-
-* MIPS16 support
-
-GDB's MIPS target configurations now handle the MIP16 16-bit
-instruction set.
-
-* Overlay support
-
-GDB now includes support for overlays; if an executable has been
-linked such that multiple sections are based at the same address, GDB
-will decide which section to use for symbolic info. You can choose to
-control the decision manually, using overlay commands, or implement
-additional target-side support and use "overlay load-target" to bring
-in the overlay mapping. Do "help overlay" for more detail.
-
-* info symbol
-
-The command "info symbol <address>" displays information about
-the symbol at the specified address.
-
-* Trace support
-
-The standard remote protocol now includes an extension that allows
-asynchronous collection and display of trace data. This requires
-extensive support in the target-side debugging stub. Tracing mode
-includes a new interaction mode in GDB and new commands: see the
-file tracepoint.c for more details.
-
-* MIPS simulator
-
-Configurations for embedded MIPS now include a simulator contributed
-by Cygnus Solutions. The simulator supports the instruction sets
-of most MIPS variants.
-
-* Sparc simulator
-
-Sparc configurations may now include the ERC32 simulator contributed
-by the European Space Agency. The simulator is not built into
-Sparc targets by default; configure with --enable-sim to include it.
-
-* set architecture
-
-For target configurations that may include multiple variants of a
-basic architecture (such as MIPS and SH), you may now set the
-architecture explicitly. "set arch" sets, "info arch" lists
-the possible architectures.
-
-*** Changes in GDB-4.16:
-
-* New native configurations
-
-Windows 95, x86 Windows NT i[345]86-*-cygwin32
-M68K NetBSD m68k-*-netbsd*
-PowerPC AIX 4.x powerpc-*-aix*
-PowerPC MacOS powerpc-*-macos*
-PowerPC Windows NT powerpcle-*-cygwin32
-RS/6000 AIX 4.x rs6000-*-aix4*
-
-* New targets
-
-ARM with RDP protocol arm-*-*
-I960 with MON960 i960-*-coff
-MIPS VxWorks mips*-*-vxworks*
-MIPS VR4300 with PMON mips64*vr4300{,el}-*-elf*
-PowerPC with PPCBUG monitor powerpc{,le}-*-eabi*
-Hitachi SH3 sh-*-*
-Matra Sparclet sparclet-*-*
-
-* PowerPC simulator
-
-The powerpc-eabi configuration now includes the PSIM simulator,
-contributed by Andrew Cagney, with assistance from Mike Meissner.
-PSIM is a very elaborate model of the PowerPC, including not only
-basic instruction set execution, but also details of execution unit
-performance and I/O hardware. See sim/ppc/README for more details.
-
-* Solaris 2.5
-
-GDB now works with Solaris 2.5.
-
-* Windows 95/NT native
-
-GDB will now work as a native debugger on Windows 95 and Windows NT.
-To build it from source, you must use the "gnu-win32" environment,
-which uses a DLL to emulate enough of Unix to run the GNU tools.
-Further information, binaries, and sources are available at
-ftp.cygnus.com, under pub/gnu-win32.
-
-* dont-repeat command
-
-If a user-defined command includes the command `dont-repeat', then the
-command will not be repeated if the user just types return. This is
-useful if the command is time-consuming to run, so that accidental
-extra keystrokes don't run the same command many times.
-
-* Send break instead of ^C
-
-The standard remote protocol now includes an option to send a break
-rather than a ^C to the target in order to interrupt it. By default,
-GDB will send ^C; to send a break, set the variable `remotebreak' to 1.
-
-* Remote protocol timeout
-
-The standard remote protocol includes a new variable `remotetimeout'
-that allows you to set the number of seconds before GDB gives up trying
-to read from the target. The default value is 2.
-
-* Automatic tracking of dynamic object loading (HPUX and Solaris only)
-
-By default GDB will automatically keep track of objects as they are
-loaded and unloaded by the dynamic linker. By using the command `set
-stop-on-solib-events 1' you can arrange for GDB to stop the inferior
-when shared library events occur, thus allowing you to set breakpoints
-in shared libraries which are explicitly loaded by the inferior.
-
-Note this feature does not work on hpux8. On hpux9 you must link
-/usr/lib/end.o into your program. This feature should work
-automatically on hpux10.
-
-* Irix 5.x hardware watchpoint support
-
-Irix 5 configurations now support the use of hardware watchpoints.
-
-* Mips protocol "SYN garbage limit"
-
-When debugging a Mips target using the `target mips' protocol, you
-may set the number of characters that GDB will ignore by setting
-the `syn-garbage-limit'. A value of -1 means that GDB will ignore
-every character. The default value is 1050.
-
-* Recording and replaying remote debug sessions
-
-If you set `remotelogfile' to the name of a file, gdb will write to it
-a recording of a remote debug session. This recording may then be
-replayed back to gdb using "gdbreplay". See gdbserver/README for
-details. This is useful when you have a problem with GDB while doing
-remote debugging; you can make a recording of the session and send it
-to someone else, who can then recreate the problem.
-
-* Speedups for remote debugging
-
-GDB includes speedups for downloading and stepping MIPS systems using
-the IDT monitor, fast downloads to the Hitachi SH E7000 emulator,
-and more efficient S-record downloading.
-
-* Memory use reductions and statistics collection
-
-GDB now uses less memory and reports statistics about memory usage.
-Try the `maint print statistics' command, for example.
-
-*** Changes in GDB-4.15:
-
-* Psymtabs for XCOFF
-
-The symbol reader for AIX GDB now uses partial symbol tables. This
-can greatly improve startup time, especially for large executables.
-
-* Remote targets use caching
-
-Remote targets now use a data cache to speed up communication with the
-remote side. The data cache could lead to incorrect results because
-it doesn't know about volatile variables, thus making it impossible to
-debug targets which use memory mapped I/O devices. `set remotecache
-off' turns the the data cache off.
-
-* Remote targets may have threads
-
-The standard remote protocol now includes support for multiple threads
-in the target system, using new protocol commands 'H' and 'T'. See
-gdb/remote.c for details.
-
-* NetROM support
-
-If GDB is configured with `--enable-netrom', then it will include
-support for the NetROM ROM emulator from XLNT Designs. The NetROM
-acts as though it is a bank of ROM on the target board, but you can
-write into it over the network. GDB's support consists only of
-support for fast loading into the emulated ROM; to debug, you must use
-another protocol, such as standard remote protocol. The usual
-sequence is something like
-
- target nrom <netrom-hostname>
- load <prog>
- target remote <netrom-hostname>:1235
-
-* Macintosh host
-
-GDB now includes support for the Apple Macintosh, as a host only. It
-may be run as either an MPW tool or as a standalone application, and
-it can debug through the serial port. All the usual GDB commands are
-available, but to the target command, you must supply "serial" as the
-device type instead of "/dev/ttyXX". See mpw-README in the main
-directory for more information on how to build. The MPW configuration
-scripts */mpw-config.in support only a few targets, and only the
-mips-idt-ecoff target has been tested.
-
-* Autoconf
-
-GDB configuration now uses autoconf. This is not user-visible,
-but does simplify configuration and building.
-
-* hpux10
-
-GDB now supports hpux10.
-
-*** Changes in GDB-4.14:
-
-* New native configurations
-
-x86 FreeBSD i[345]86-*-freebsd
-x86 NetBSD i[345]86-*-netbsd
-NS32k NetBSD ns32k-*-netbsd
-Sparc NetBSD sparc-*-netbsd
-
-* New targets
-
-A29K VxWorks a29k-*-vxworks
-HP PA PRO embedded (WinBond W89K & Oki OP50N) hppa*-*-pro*
-CPU32 EST-300 emulator m68*-*-est*
-PowerPC ELF powerpc-*-elf
-WDC 65816 w65-*-*
-
-* Alpha OSF/1 support for procfs
-
-GDB now supports procfs under OSF/1-2.x and higher, which makes it
-possible to attach to running processes. As the mounting of the /proc
-filesystem is optional on the Alpha, GDB automatically determines
-the availability of /proc during startup. This can lead to problems
-if /proc is unmounted after GDB has been started.
-
-* Arguments to user-defined commands
-
-User commands may accept up to 10 arguments separated by whitespace.
-Arguments are accessed within the user command via $arg0..$arg9. A
-trivial example:
-define adder
- print $arg0 + $arg1 + $arg2
-
-To execute the command use:
-adder 1 2 3
-
-Defines the command "adder" which prints the sum of its three arguments.
-Note the arguments are text substitutions, so they may reference variables,
-use complex expressions, or even perform inferior function calls.
-
-* New `if' and `while' commands
-
-This makes it possible to write more sophisticated user-defined
-commands. Both commands take a single argument, which is the
-expression to evaluate, and must be followed by the commands to
-execute, one per line, if the expression is nonzero, the list being
-terminated by the word `end'. The `if' command list may include an
-`else' word, which causes the following commands to be executed only
-if the expression is zero.
-
-* Fortran source language mode
-
-GDB now includes partial support for Fortran 77. It will recognize
-Fortran programs and can evaluate a subset of Fortran expressions, but
-variables and functions may not be handled correctly. GDB will work
-with G77, but does not yet know much about symbols emitted by other
-Fortran compilers.
-
-* Better HPUX support
-
-Most debugging facilities now work on dynamic executables for HPPAs
-running hpux9 or later. You can attach to running dynamically linked
-processes, but by default the dynamic libraries will be read-only, so
-for instance you won't be able to put breakpoints in them. To change
-that behavior do the following before running the program:
-
- adb -w a.out
- __dld_flags?W 0x5
- control-d
-
-This will cause the libraries to be mapped private and read-write.
-To revert to the normal behavior, do this:
-
- adb -w a.out
- __dld_flags?W 0x4
- control-d
-
-You cannot set breakpoints or examine data in the library until after
-the library is loaded if the function/data symbols do not have
-external linkage.
-
-GDB can now also read debug symbols produced by the HP C compiler on
-HPPAs (sorry, no C++, Fortran or 68k support).
-
-* Target byte order now dynamically selectable
-
-You can choose which byte order to use with a target system, via the
-commands "set endian big" and "set endian little", and you can see the
-current setting by using "show endian". You can also give the command
-"set endian auto", in which case GDB will use the byte order
-associated with the executable. Currently, only embedded MIPS
-configurations support dynamic selection of target byte order.
-
-* New DOS host serial code
-
-This version uses DPMI interrupts to handle buffered I/O, so you
-no longer need to run asynctsr when debugging boards connected to
-a PC's serial port.
-
-*** Changes in GDB-4.13:
-
-* New "complete" command
-
-This lists all the possible completions for the rest of the line, if it
-were to be given as a command itself. This is intended for use by emacs.
-
-* Trailing space optional in prompt
-
-"set prompt" no longer adds a space for you after the prompt you set. This
-allows you to set a prompt which ends in a space or one that does not.
-
-* Breakpoint hit counts
-
-"info break" now displays a count of the number of times the breakpoint
-has been hit. This is especially useful in conjunction with "ignore"; you
-can ignore a large number of breakpoint hits, look at the breakpoint info
-to see how many times the breakpoint was hit, then run again, ignoring one
-less than that number, and this will get you quickly to the last hit of
-that breakpoint.
-
-* Ability to stop printing at NULL character
-
-"set print null-stop" will cause GDB to stop printing the characters of
-an array when the first NULL is encountered. This is useful when large
-arrays actually contain only short strings.
-
-* Shared library breakpoints
-
-In SunOS 4.x, SVR4, and Alpha OSF/1 configurations, you can now set
-breakpoints in shared libraries before the executable is run.
-
-* Hardware watchpoints
-
-There is a new hardware breakpoint for the watch command for sparclite
-targets. See gdb/sparclite/hw_breakpoint.note.
-
-Hardware watchpoints are also now supported under Linux.
-
-* Annotations
-
-Annotations have been added. These are for use with graphical interfaces,
-and are still experimental. Currently only gdba.el uses these.
-
-* Improved Irix 5 support
-
-GDB now works properly with Irix 5.2.
-
-* Improved HPPA support
-
-GDB now works properly with the latest GCC and GAS.
-
-* New native configurations
-
-Sequent PTX4 i[34]86-sequent-ptx4
-HPPA running OSF/1 hppa*-*-osf*
-Atari TT running SVR4 m68*-*-sysv4*
-RS/6000 LynxOS rs6000-*-lynxos*
-
-* New targets
-
-OS/9000 i[34]86-*-os9k
-MIPS R4000 mips64*{,el}-*-{ecoff,elf}
-Sparc64 sparc64-*-*
-
-* Hitachi SH7000 and E7000-PC ICE support
-
-There is now support for communicating with the Hitachi E7000-PC ICE.
-This is available automatically when GDB is configured for the SH.
-
-* Fixes
-
-As usual, a variety of small fixes and improvements, both generic
-and configuration-specific. See the ChangeLog for more detail.
-
-*** Changes in GDB-4.12:
-
-* Irix 5 is now supported
-
-* HPPA support
-
-GDB-4.12 on the HPPA has a number of changes which make it unable
-to debug the output from the currently released versions of GCC and
-GAS (GCC 2.5.8 and GAS-2.2 or PAGAS-1.36). Until the next major release
-of GCC and GAS, versions of these tools designed to work with GDB-4.12
-can be retrieved via anonymous ftp from jaguar.cs.utah.edu:/dist.
-
-
-*** Changes in GDB-4.11:
-
-* User visible changes:
-
-* Remote Debugging
-
-The "set remotedebug" option is now consistent between the mips remote
-target, remote targets using the gdb-specific protocol, UDI (AMD's
-debug protocol for the 29k) and the 88k bug monitor. It is now an
-integer specifying a debug level (normally 0 or 1, but 2 means more
-debugging info for the mips target).
-
-* DEC Alpha native support
-
-GDB now works on the DEC Alpha. GCC 2.4.5 does not produce usable
-debug info, but GDB works fairly well with the DEC compiler and should
-work with a future GCC release. See the README file for a few
-Alpha-specific notes.
-
-* Preliminary thread implementation
-
-GDB now has preliminary thread support for both SGI/Irix and LynxOS.
-
-* LynxOS native and target support for 386
-
-This release has been hosted on LynxOS 2.2, and also can be configured
-to remotely debug programs running under LynxOS (see gdb/gdbserver/README
-for details).
-
-* Improvements in C++ mangling/demangling.
-
-This release has much better g++ debugging, specifically in name
-mangling/demangling, virtual function calls, print virtual table,
-call methods, ...etc.
-
-*** Changes in GDB-4.10:
-
- * User visible changes:
-
-Remote debugging using the GDB-specific (`target remote') protocol now
-supports the `load' command. This is only useful if you have some
-other way of getting the stub to the target system, and you can put it
-somewhere in memory where it won't get clobbered by the download.
-
-Filename completion now works.
-
-When run under emacs mode, the "info line" command now causes the
-arrow to point to the line specified. Also, "info line" prints
-addresses in symbolic form (as well as hex).
-
-All vxworks based targets now support a user settable option, called
-vxworks-timeout. This option represents the number of seconds gdb
-should wait for responses to rpc's. You might want to use this if
-your vxworks target is, perhaps, a slow software simulator or happens
-to be on the far side of a thin network line.
-
- * DEC alpha support
-
-This release contains support for using a DEC alpha as a GDB host for
-cross debugging. Native alpha debugging is not supported yet.
-
-
-*** Changes in GDB-4.9:
-
- * Testsuite
-
-This is the first GDB release which is accompanied by a matching testsuite.
-The testsuite requires installation of dejagnu, which should be available
-via ftp from most sites that carry GNU software.
-
- * C++ demangling
-
-'Cfront' style demangling has had its name changed to 'ARM' style, to
-emphasize that it was written from the specifications in the C++ Annotated
-Reference Manual, not necessarily to be compatible with AT&T cfront. Despite
-disclaimers, it still generated too much confusion with users attempting to
-use gdb with AT&T cfront.
-
- * Simulators
-
-GDB now uses a standard remote interface to a simulator library.
-So far, the library contains simulators for the Zilog Z8001/2, the
-Hitachi H8/300, H8/500 and Super-H.
-
- * New targets supported
-
-H8/300 simulator h8300-hitachi-hms or h8300hms
-H8/500 simulator h8500-hitachi-hms or h8500hms
-SH simulator sh-hitachi-hms or sh
-Z8000 simulator z8k-zilog-none or z8ksim
-IDT MIPS board over serial line mips-idt-ecoff
-
-Cross-debugging to GO32 targets is supported. It requires a custom
-version of the i386-stub.c module which is integrated with the
-GO32 memory extender.
-
- * New remote protocols
-
-MIPS remote debugging protocol.
-
- * New source languages supported
-
-This version includes preliminary support for Chill, a Pascal like language
-used by telecommunications companies. Chill support is also being integrated
-into the GNU compiler, but we don't know when it will be publically available.
-
-
-*** Changes in GDB-4.8:
-
- * HP Precision Architecture supported
-
-GDB now supports HP PA-RISC machines running HPUX. A preliminary
-version of this support was available as a set of patches from the
-University of Utah. GDB does not support debugging of programs
-compiled with the HP compiler, because HP will not document their file
-format. Instead, you must use GCC (version 2.3.2 or later) and PA-GAS
-(as available from jaguar.cs.utah.edu:/dist/pa-gas.u4.tar.Z).
-
-Many problems in the preliminary version have been fixed.
-
- * Faster and better demangling
-
-We have improved template demangling and fixed numerous bugs in the GNU style
-demangler. It can now handle type modifiers such as `static' or `const'. Wide
-character types (wchar_t) are now supported. Demangling of each symbol is now
-only done once, and is cached when the symbol table for a file is read in.
-This results in a small increase in memory usage for C programs, a moderate
-increase in memory usage for C++ programs, and a fantastic speedup in
-symbol lookups.
-
-`Cfront' style demangling still doesn't work with AT&T cfront. It was written
-from the specifications in the Annotated Reference Manual, which AT&T's
-compiler does not actually implement.
-
- * G++ multiple inheritance compiler problem
-
-In the 2.3.2 release of gcc/g++, how the compiler resolves multiple
-inheritance lattices was reworked to properly discover ambiguities. We
-recently found an example which causes this new algorithm to fail in a
-very subtle way, producing bad debug information for those classes.
-The file 'gcc.patch' (in this directory) can be applied to gcc to
-circumvent the problem. A future GCC release will contain a complete
-fix.
-
-The previous G++ debug info problem (mentioned below for the gdb-4.7
-release) is fixed in gcc version 2.3.2.
-
- * Improved configure script
-
-The `configure' script will now attempt to guess your system type if
-you don't supply a host system type. The old scheme of supplying a
-host system triplet is preferable over using this. All the magic is
-done in the new `config.guess' script. Examine it for details.
-
-We have also brought our configure script much more in line with the FSF's
-version. It now supports the --with-xxx options. In particular,
-`--with-minimal-bfd' can be used to make the GDB binary image smaller.
-The resulting GDB will not be able to read arbitrary object file formats --
-only the format ``expected'' to be used on the configured target system.
-We hope to make this the default in a future release.
-
- * Documentation improvements
-
-There's new internal documentation on how to modify GDB, and how to
-produce clean changes to the code. We implore people to read it
-before submitting changes.
-
-The GDB manual uses new, sexy Texinfo conditionals, rather than arcane
-M4 macros. The new texinfo.tex is provided in this release. Pre-built
-`info' files are also provided. To build `info' files from scratch,
-you will need the latest `makeinfo' release, which will be available in
-a future texinfo-X.Y release.
-
-*NOTE* The new texinfo.tex can cause old versions of TeX to hang.
-We're not sure exactly which versions have this problem, but it has
-been seen in 3.0. We highly recommend upgrading to TeX version 3.141
-or better. If that isn't possible, there is a patch in
-`texinfo/tex3patch' that will modify `texinfo/texinfo.tex' to work
-around this problem.
-
- * New features
-
-GDB now supports array constants that can be used in expressions typed in by
-the user. The syntax is `{element, element, ...}'. Ie: you can now type
-`print {1, 2, 3}', and it will build up an array in memory malloc'd in
-the target program.
-
-The new directory `gdb/sparclite' contains a program that demonstrates
-how the sparc-stub.c remote stub runs on a Fujitsu SPARClite processor.
-
- * New native hosts supported
-
-HP/PA-RISC under HPUX using GNU tools hppa1.1-hp-hpux
-386 CPUs running SCO Unix 3.2v4 i386-unknown-sco3.2v4
-
- * New targets supported
-
-AMD 29k family via UDI a29k-amd-udi or udi29k
-
- * New file formats supported
-
-BFD now supports reading HP/PA-RISC executables (SOM file format?),
-HPUX core files, and SCO 3.2v2 core files.
-
- * Major bug fixes
-
-Attaching to processes now works again; thanks for the many bug reports.
-
-We have also stomped on a bunch of core dumps caused by
-printf_filtered("%s") problems.
-
-We eliminated a copyright problem on the rpc and ptrace header files
-for VxWorks, which was discovered at the last minute during the 4.7
-release. You should now be able to build a VxWorks GDB.
-
-You can now interrupt gdb while an attached process is running. This
-will cause the attached process to stop, and give control back to GDB.
-
-We fixed problems caused by using too many file descriptors
-for reading symbols from object files and libraries. This was
-especially a problem for programs that used many (~100) shared
-libraries.
-
-The `step' command now only enters a subroutine if there is line number
-information for the subroutine. Otherwise it acts like the `next'
-command. Previously, `step' would enter subroutines if there was
-any debugging information about the routine. This avoids problems
-when using `cc -g1' on MIPS machines.
-
- * Internal improvements
-
-GDB's internal interfaces have been improved to make it easier to support
-debugging of multiple languages in the future.
-
-GDB now uses a common structure for symbol information internally.
-Minimal symbols (derived from linkage symbols in object files), partial
-symbols (from a quick scan of debug information), and full symbols
-contain a common subset of information, making it easier to write
-shared code that handles any of them.
-
- * New command line options
-
-We now accept --silent as an alias for --quiet.
-
- * Mmalloc licensing
-
-The memory-mapped-malloc library is now licensed under the GNU Library
-General Public License.
-
-*** Changes in GDB-4.7:
-
- * Host/native/target split
-
-GDB has had some major internal surgery to untangle the support for
-hosts and remote targets. Now, when you configure GDB for a remote
-target, it will no longer load in all of the support for debugging
-local programs on the host. When fully completed and tested, this will
-ensure that arbitrary host/target combinations are possible.
-
-The primary conceptual shift is to separate the non-portable code in
-GDB into three categories. Host specific code is required any time GDB
-is compiled on that host, regardless of the target. Target specific
-code relates to the peculiarities of the target, but can be compiled on
-any host. Native specific code is everything else: it can only be
-built when the host and target are the same system. Child process
-handling and core file support are two common `native' examples.
-
-GDB's use of /proc for controlling Unix child processes is now cleaner.
-It has been split out into a single module under the `target_ops' vector,
-plus two native-dependent functions for each system that uses /proc.
-
- * New hosts supported
-
-HP/Apollo 68k (under the BSD domain) m68k-apollo-bsd or apollo68bsd
-386 CPUs running various BSD ports i386-unknown-bsd or 386bsd
-386 CPUs running SCO Unix i386-unknown-scosysv322 or i386sco
-
- * New targets supported
-
-Fujitsu SPARClite sparclite-fujitsu-none or sparclite
-68030 and CPU32 m68030-*-*, m68332-*-*
-
- * New native hosts supported
-
-386 CPUs running various BSD ports i386-unknown-bsd or 386bsd
- (386bsd is not well tested yet)
-386 CPUs running SCO Unix i386-unknown-scosysv322 or sco
-
- * New file formats supported
-
-BFD now supports COFF files for the Zilog Z8000 microprocessor. It
-supports reading of `a.out.adobe' object files, which are an a.out
-format extended with minimal information about multiple sections.
-
- * New commands
-
-`show copying' is the same as the old `info copying'.
-`show warranty' is the same as `info warrantee'.
-These were renamed for consistency. The old commands continue to work.
-
-`info handle' is a new alias for `info signals'.
-
-You can now define pre-command hooks, which attach arbitrary command
-scripts to any command. The commands in the hook will be executed
-prior to the user's command. You can also create a hook which will be
-executed whenever the program stops. See gdb.texinfo.
-
- * C++ improvements
-
-We now deal with Cfront style name mangling, and can even extract type
-info from mangled symbols. GDB can automatically figure out which
-symbol mangling style your C++ compiler uses.
-
-Calling of methods and virtual functions has been improved as well.
-
- * Major bug fixes
-
-The crash that occured when debugging Sun Ansi-C compiled binaries is
-fixed. This was due to mishandling of the extra N_SO stabs output
-by the compiler.
-
-We also finally got Ultrix 4.2 running in house, and fixed core file
-support, with help from a dozen people on the net.
-
-John M. Farrell discovered that the reason that single-stepping was so
-slow on all of the Mips based platforms (primarily SGI and DEC) was
-that we were trying to demangle and lookup a symbol used for internal
-purposes on every instruction that was being stepped through. Changing
-the name of that symbol so that it couldn't be mistaken for a C++
-mangled symbol sped things up a great deal.
-
-Rich Pixley sped up symbol lookups in general by getting much smarter
-about when C++ symbol mangling is necessary. This should make symbol
-completion (TAB on the command line) much faster. It's not as fast as
-we'd like, but it's significantly faster than gdb-4.6.
-
- * AMD 29k support
-
-A new user controllable variable 'call_scratch_address' can
-specify the location of a scratch area to be used when GDB
-calls a function in the target. This is necessary because the
-usual method of putting the scratch area on the stack does not work
-in systems that have separate instruction and data spaces.
-
-We integrated changes to support the 29k UDI (Universal Debugger
-Interface), but discovered at the last minute that we didn't have all
-of the appropriate copyright paperwork. We are working with AMD to
-resolve this, and hope to have it available soon.
-
- * Remote interfaces
-
-We have sped up the remote serial line protocol, especially for targets
-with lots of registers. It now supports a new `expedited status' ('T')
-message which can be used in place of the existing 'S' status message.
-This allows the remote stub to send only the registers that GDB
-needs to make a quick decision about single-stepping or conditional
-breakpoints, eliminating the need to fetch the entire register set for
-each instruction being stepped through.
-
-The GDB remote serial protocol now implements a write-through cache for
-registers, only re-reading the registers if the target has run.
-
-There is also a new remote serial stub for SPARC processors. You can
-find it in gdb-4.7/gdb/sparc-stub.c. This was written to support the
-Fujitsu SPARClite processor, but will run on any stand-alone SPARC
-processor with a serial port.
-
- * Configuration
-
-Configure.in files have become much easier to read and modify. A new
-`table driven' format makes it more obvious what configurations are
-supported, and what files each one uses.
-
- * Library changes
-
-There is a new opcodes library which will eventually contain all of the
-disassembly routines and opcode tables. At present, it only contains
-Sparc and Z8000 routines. This will allow the assembler, debugger, and
-disassembler (binutils/objdump) to share these routines.
-
-The libiberty library is now copylefted under the GNU Library General
-Public License. This allows more liberal use, and was done so libg++
-can use it. This makes no difference to GDB, since the Library License
-grants all the rights from the General Public License.
-
- * Documentation
-
-The file gdb-4.7/gdb/doc/stabs.texinfo is a (relatively) complete
-reference to the stabs symbol info used by the debugger. It is (as far
-as we know) the only published document on this fascinating topic. We
-encourage you to read it, compare it to the stabs information on your
-system, and send improvements on the document in general (to
-bug-gdb@prep.ai.mit.edu).
-
-And, of course, many bugs have been fixed.
-
-
-*** Changes in GDB-4.6:
-
- * Better support for C++ function names
-
-GDB now accepts as input the "demangled form" of C++ overloaded function
-names and member function names, and can do command completion on such names
-(using TAB, TAB-TAB, and ESC-?). The names have to be quoted with a pair of
-single quotes. Examples are 'func (int, long)' and 'obj::operator==(obj&)'.
-Make use of command completion, it is your friend.
-
-GDB also now accepts a variety of C++ mangled symbol formats. They are
-the GNU g++ style, the Cfront (ARM) style, and the Lucid (lcc) style.
-You can tell GDB which format to use by doing a 'set demangle-style {gnu,
-lucid, cfront, auto}'. 'gnu' is the default. Do a 'set demangle-style foo'
-for the list of formats.
-
- * G++ symbol mangling problem
-
-Recent versions of gcc have a bug in how they emit debugging information for
-C++ methods (when using dbx-style stabs). The file 'gcc.patch' (in this
-directory) can be applied to gcc to fix the problem. Alternatively, if you
-can't fix gcc, you can #define GCC_MANGLE_BUG when compling gdb/symtab.c. The
-usual symptom is difficulty with setting breakpoints on methods. GDB complains
-about the method being non-existent. (We believe that version 2.2.2 of GCC has
-this problem.)
-
- * New 'maintenance' command
-
-All of the commands related to hacking GDB internals have been moved out of
-the main command set, and now live behind the 'maintenance' command. This
-can also be abbreviated as 'mt'. The following changes were made:
-
- dump-me -> maintenance dump-me
- info all-breakpoints -> maintenance info breakpoints
- printmsyms -> maintenance print msyms
- printobjfiles -> maintenance print objfiles
- printpsyms -> maintenance print psymbols
- printsyms -> maintenance print symbols
-
-The following commands are new:
-
- maintenance demangle Call internal GDB demangler routine to
- demangle a C++ link name and prints the result.
- maintenance print type Print a type chain for a given symbol
-
- * Change to .gdbinit file processing
-
-We now read the $HOME/.gdbinit file before processing the argv arguments
-(e.g. reading symbol files or core files). This allows global parameters to
-be set, which will apply during the symbol reading. The ./.gdbinit is still
-read after argv processing.
-
- * New hosts supported
-
-Solaris-2.0 !!! sparc-sun-solaris2 or sun4sol2
-
-Linux support i386-unknown-linux or linux
-
-We are also including code to support the HP/PA running BSD and HPUX. This
-is almost guaranteed not to work, as we didn't have time to test or build it
-for this release. We are including it so that the more adventurous (or
-masochistic) of you can play with it. We also had major problems with the
-fact that the compiler that we got from HP doesn't support the -g option.
-It costs extra.
-
- * New targets supported
-
-Hitachi H8/300 h8300-hitachi-hms or h8300hms
-
- * More smarts about finding #include files
-
-GDB now remembers the compilation directory for all include files, and for
-all files from which C is generated (like yacc and lex sources). This
-greatly improves GDB's ability to find yacc/lex sources, and include files,
-especially if you are debugging your program from a directory different from
-the one that contains your sources.
-
-We also fixed a bug which caused difficulty with listing and setting
-breakpoints in include files which contain C code. (In the past, you had to
-try twice in order to list an include file that you hadn't looked at before.)
-
- * Interesting infernals change
-
-GDB now deals with arbitrary numbers of sections, where the symbols for each
-section must be relocated relative to that section's landing place in the
-target's address space. This work was needed to support ELF with embedded
-stabs used by Solaris-2.0.
-
- * Bug fixes (of course!)
-
-There have been loads of fixes for the following things:
- mips, rs6000, 29k/udi, m68k, g++, type handling, elf/dwarf, m88k,
- i960, stabs, DOS(GO32), procfs, etc...
-
-See the ChangeLog for details.
-
-*** Changes in GDB-4.5:
-
- * New machines supported (host and target)
-
-IBM RS6000 running AIX rs6000-ibm-aix or rs6000
-
-SGI Irix-4.x mips-sgi-irix4 or iris4
-
- * New malloc package
-
-GDB now uses a new memory manager called mmalloc, based on gmalloc.
-Mmalloc is capable of handling mutiple heaps of memory. It is also
-capable of saving a heap to a file, and then mapping it back in later.
-This can be used to greatly speedup the startup of GDB by using a
-pre-parsed symbol table which lives in a mmalloc managed heap. For
-more details, please read mmalloc/mmalloc.texi.
-
- * info proc
-
-The 'info proc' command (SVR4 only) has been enhanced quite a bit. See
-'help info proc' for details.
-
- * MIPS ecoff symbol table format
-
-The code that reads MIPS symbol table format is now supported on all hosts.
-Thanks to MIPS for releasing the sym.h and symconst.h files to make this
-possible.
-
- * File name changes for MS-DOS
-
-Many files in the config directories have been renamed to make it easier to
-support GDB on MS-DOSe systems (which have very restrictive file name
-conventions :-( ). MS-DOSe host support (under DJ Delorie's GO32
-environment) is close to working but has some remaining problems. Note
-that debugging of DOS programs is not supported, due to limitations
-in the ``operating system'', but it can be used to host cross-debugging.
-
- * Cross byte order fixes
-
-Many fixes have been made to support cross debugging of Sparc and MIPS
-targets from hosts whose byte order differs.
-
- * New -mapped and -readnow options
-
-If memory-mapped files are available on your system through the 'mmap'
-system call, you can use the -mapped option on the `file' or
-`symbol-file' commands to cause GDB to write the symbols from your
-program into a reusable file. If the program you are debugging is
-called `/path/fred', the mapped symbol file will be `./fred.syms'.
-Future GDB debugging sessions will notice the presence of this file,
-and will quickly map in symbol information from it, rather than reading
-the symbol table from the executable program. Using the '-mapped'
-option in a GDB `file' or `symbol-file' command has the same effect as
-starting GDB with the '-mapped' command-line option.
-
-You can cause GDB to read the entire symbol table immediately by using
-the '-readnow' option with any of the commands that load symbol table
-information (or on the GDB command line). This makes the command
-slower, but makes future operations faster.
-
-The -mapped and -readnow options are typically combined in order to
-build a `fred.syms' file that contains complete symbol information.
-A simple GDB invocation to do nothing but build a `.syms' file for future
-use is:
-
- gdb -batch -nx -mapped -readnow programname
-
-The `.syms' file is specific to the host machine on which GDB is run.
-It holds an exact image of GDB's internal symbol table. It cannot be
-shared across multiple host platforms.
-
- * longjmp() handling
-
-GDB is now capable of stepping and nexting over longjmp(), _longjmp(), and
-siglongjmp() without losing control. This feature has not yet been ported to
-all systems. It currently works on many 386 platforms, all MIPS-based
-platforms (SGI, DECstation, etc), and Sun3/4.
-
- * Solaris 2.0
-
-Preliminary work has been put in to support the new Solaris OS from Sun. At
-this time, it can control and debug processes, but it is not capable of
-reading symbols.
-
- * Bug fixes
-
-As always, many many bug fixes. The major areas were with g++, and mipsread.
-People using the MIPS-based platforms should experience fewer mysterious
-crashes and trashed symbol tables.
-
-*** Changes in GDB-4.4:
-
- * New machines supported (host and target)
-
-SCO Unix on i386 IBM PC clones i386-sco-sysv or i386sco
- (except core files)
-BSD Reno on Vax vax-dec-bsd
-Ultrix on Vax vax-dec-ultrix
-
- * New machines supported (target)
-
-AMD 29000 embedded, using EBMON a29k-none-none
-
- * C++ support
-
-GDB continues to improve its handling of C++. `References' work better.
-The demangler has also been improved, and now deals with symbols mangled as
-per the Annotated C++ Reference Guide.
-
-GDB also now handles `stabs' symbol information embedded in MIPS
-`ecoff' symbol tables. Since the ecoff format was not easily
-extensible to handle new languages such as C++, this appeared to be a
-good way to put C++ debugging info into MIPS binaries. This option
-will be supported in the GNU C compiler, version 2, when it is
-released.
-
- * New features for SVR4
-
-GDB now handles SVR4 shared libraries, in the same fashion as SunOS
-shared libraries. Debugging dynamically linked programs should present
-only minor differences from debugging statically linked programs.
-
-The `info proc' command will print out information about any process
-on an SVR4 system (including the one you are debugging). At the moment,
-it prints the address mappings of the process.
-
-If you bring up GDB on another SVR4 system, please send mail to
-bug-gdb@prep.ai.mit.edu to let us know what changes were reqired (if any).
-
- * Better dynamic linking support in SunOS
-
-Reading symbols from shared libraries which contain debugging symbols
-now works properly. However, there remain issues such as automatic
-skipping of `transfer vector' code during function calls, which
-make it harder to debug code in a shared library, than to debug the
-same code linked statically.
-
- * New Getopt
-
-GDB is now using the latest `getopt' routines from the FSF. This
-version accepts the -- prefix for options with long names. GDB will
-continue to accept the old forms (-option and +option) as well.
-Various single letter abbreviations for options have been explicity
-added to the option table so that they won't get overshadowed in the
-future by other options that begin with the same letter.
-
- * Bugs fixed
-
-The `cleanup_undefined_types' bug that many of you noticed has been squashed.
-Many assorted bugs have been handled. Many more remain to be handled.
-See the various ChangeLog files (primarily in gdb and bfd) for details.
-
-
-*** Changes in GDB-4.3:
-
- * New machines supported (host and target)
-
-Amiga 3000 running Amix m68k-cbm-svr4 or amix
-NCR 3000 386 running SVR4 i386-ncr-svr4 or ncr3000
-Motorola Delta 88000 running Sys V m88k-motorola-sysv or delta88
-
- * Almost SCO Unix support
-
-We had hoped to support:
-SCO Unix on i386 IBM PC clones i386-sco-sysv or i386sco
-(except for core file support), but we discovered very late in the release
-that it has problems with process groups that render gdb unusable. Sorry
-about that. I encourage people to fix it and post the fixes.
-
- * Preliminary ELF and DWARF support
-
-GDB can read ELF object files on System V Release 4, and can handle
-debugging records for C, in DWARF format, in ELF files. This support
-is preliminary. If you bring up GDB on another SVR4 system, please
-send mail to bug-gdb@prep.ai.mit.edu to let us know what changes were
-reqired (if any).
-
- * New Readline
-
-GDB now uses the latest `readline' library. One user-visible change
-is that two tabs will list possible command completions, which previously
-required typing M-? (meta-question mark, or ESC ?).
-
- * Bugs fixed
-
-The `stepi' bug that many of you noticed has been squashed.
-Many bugs in C++ have been handled. Many more remain to be handled.
-See the various ChangeLog files (primarily in gdb and bfd) for details.
-
- * State of the MIPS world (in case you wondered):
-
-GDB can understand the symbol tables emitted by the compilers
-supplied by most vendors of MIPS-based machines, including DEC. These
-symbol tables are in a format that essentially nobody else uses.
-
-Some versions of gcc come with an assembler post-processor called
-mips-tfile. This program is required if you want to do source-level
-debugging of gcc-compiled programs. I believe FSF does not ship
-mips-tfile with gcc version 1, but it will eventually come with gcc
-version 2.
-
-Debugging of g++ output remains a problem. g++ version 1.xx does not
-really support it at all. (If you're lucky, you should be able to get
-line numbers and stack traces to work, but no parameters or local
-variables.) With some work it should be possible to improve the
-situation somewhat.
-
-When gcc version 2 is released, you will have somewhat better luck.
-However, even then you will get confusing results for inheritance and
-methods.
-
-We will eventually provide full debugging of g++ output on
-DECstations. This will probably involve some kind of stabs-in-ecoff
-encapulation, but the details have not been worked out yet.
-
-
-*** Changes in GDB-4.2:
-
- * Improved configuration
-
-Only one copy of `configure' exists now, and it is not self-modifying.
-Porting BFD is simpler.
-
- * Stepping improved
-
-The `step' and `next' commands now only stop at the first instruction
-of a source line. This prevents the multiple stops that used to occur
-in switch statements, for-loops, etc. `Step' continues to stop if a
-function that has debugging information is called within the line.
-
- * Bug fixing
-
-Lots of small bugs fixed. More remain.
-
- * New host supported (not target)
-
-Intel 386 PC clone running Mach i386-none-mach
-
-
-*** Changes in GDB-4.1:
-
- * Multiple source language support
-
-GDB now has internal scaffolding to handle several source languages.
-It determines the type of each source file from its filename extension,
-and will switch expression parsing and number formatting to match the
-language of the function in the currently selected stack frame.
-You can also specifically set the language to be used, with
-`set language c' or `set language modula-2'.
-
- * GDB and Modula-2
-
-GDB now has preliminary support for the GNU Modula-2 compiler,
-currently under development at the State University of New York at
-Buffalo. Development of both GDB and the GNU Modula-2 compiler will
-continue through the fall of 1991 and into 1992.
-
-Other Modula-2 compilers are currently not supported, and attempting to
-debug programs compiled with them will likely result in an error as the
-symbol table is read. Feel free to work on it, though!
-
-There are hooks in GDB for strict type checking and range checking,
-in the `Modula-2 philosophy', but they do not currently work.
-
- * set write on/off
-
-GDB can now write to executable and core files (e.g. patch
-a variable's value). You must turn this switch on, specify
-the file ("exec foo" or "core foo"), *then* modify it, e.g.
-by assigning a new value to a variable. Modifications take
-effect immediately.
-
- * Automatic SunOS shared library reading
-
-When you run your program, GDB automatically determines where its
-shared libraries (if any) have been loaded, and reads their symbols.
-The `share' command is no longer needed. This also works when
-examining core files.
-
- * set listsize
-
-You can specify the number of lines that the `list' command shows.
-The default is 10.
-
- * New machines supported (host and target)
-
-SGI Iris (MIPS) running Irix V3: mips-sgi-irix or iris
-Sony NEWS (68K) running NEWSOS 3.x: m68k-sony-sysv or news
-Ultracomputer (29K) running Sym1: a29k-nyu-sym1 or ultra3
-
- * New hosts supported (not targets)
-
-IBM RT/PC: romp-ibm-aix or rtpc
-
- * New targets supported (not hosts)
-
-AMD 29000 embedded with COFF a29k-none-coff
-AMD 29000 embedded with a.out a29k-none-aout
-Ultracomputer remote kernel debug a29k-nyu-kern
-
- * New remote interfaces
-
-AMD 29000 Adapt
-AMD 29000 Minimon
-
-
-*** Changes in GDB-4.0:
-
- * New Facilities
-
-Wide output is wrapped at good places to make the output more readable.
-
-Gdb now supports cross-debugging from a host machine of one type to a
-target machine of another type. Communication with the target system
-is over serial lines. The ``target'' command handles connecting to the
-remote system; the ``load'' command will download a program into the
-remote system. Serial stubs for the m68k and i386 are provided. Gdb
-also supports debugging of realtime processes running under VxWorks,
-using SunRPC Remote Procedure Calls over TCP/IP to talk to a debugger
-stub on the target system.
-
-New CPUs supported include the AMD 29000 and Intel 960.
-
-GDB now reads object files and symbol tables via a ``binary file''
-library, which allows a single copy of GDB to debug programs of multiple
-object file types such as a.out and coff.
-
-There is now a GDB reference card in "doc/refcard.tex". (Make targets
-refcard.dvi and refcard.ps are available to format it).
-
-
- * Control-Variable user interface simplified
-
-All variables that control the operation of the debugger can be set
-by the ``set'' command, and displayed by the ``show'' command.
-
-For example, ``set prompt new-gdb=>'' will change your prompt to new-gdb=>.
-``Show prompt'' produces the response:
-Gdb's prompt is new-gdb=>.
-
-What follows are the NEW set commands. The command ``help set'' will
-print a complete list of old and new set commands. ``help set FOO''
-will give a longer description of the variable FOO. ``show'' will show
-all of the variable descriptions and their current settings.
-
-confirm on/off: Enables warning questions for operations that are
- hard to recover from, e.g. rerunning the program while
- it is already running. Default is ON.
-
-editing on/off: Enables EMACS style command line editing
- of input. Previous lines can be recalled with
- control-P, the current line can be edited with control-B,
- you can search for commands with control-R, etc.
- Default is ON.
-
-history filename NAME: NAME is where the gdb command history
- will be stored. The default is .gdb_history,
- or the value of the environment variable
- GDBHISTFILE.
-
-history size N: The size, in commands, of the command history. The
- default is 256, or the value of the environment variable
- HISTSIZE.
-
-history save on/off: If this value is set to ON, the history file will
- be saved after exiting gdb. If set to OFF, the
- file will not be saved. The default is OFF.
-
-history expansion on/off: If this value is set to ON, then csh-like
- history expansion will be performed on
- command line input. The default is OFF.
-
-radix N: Sets the default radix for input and output. It can be set
- to 8, 10, or 16. Note that the argument to "radix" is interpreted
- in the current radix, so "set radix 10" is always a no-op.
-
-height N: This integer value is the number of lines on a page. Default
- is 24, the current `stty rows'' setting, or the ``li#''
- setting from the termcap entry matching the environment
- variable TERM.
-
-width N: This integer value is the number of characters on a line.
- Default is 80, the current `stty cols'' setting, or the ``co#''
- setting from the termcap entry matching the environment
- variable TERM.
-
-Note: ``set screensize'' is obsolete. Use ``set height'' and
-``set width'' instead.
-
-print address on/off: Print memory addresses in various command displays,
- such as stack traces and structure values. Gdb looks
- more ``symbolic'' if you turn this off; it looks more
- ``machine level'' with it on. Default is ON.
-
-print array on/off: Prettyprint arrays. New convenient format! Default
- is OFF.
-
-print demangle on/off: Print C++ symbols in "source" form if on,
- "raw" form if off.
-
-print asm-demangle on/off: Same, for assembler level printouts
- like instructions.
-
-print vtbl on/off: Prettyprint C++ virtual function tables. Default is OFF.
-
-
- * Support for Epoch Environment.
-
-The epoch environment is a version of Emacs v18 with windowing. One
-new command, ``inspect'', is identical to ``print'', except that if you
-are running in the epoch environment, the value is printed in its own
-window.
-
-
- * Support for Shared Libraries
-
-GDB can now debug programs and core files that use SunOS shared libraries.
-Symbols from a shared library cannot be referenced
-before the shared library has been linked with the program (this
-happens after you type ``run'' and before the function main() is entered).
-At any time after this linking (including when examining core files
-from dynamically linked programs), gdb reads the symbols from each
-shared library when you type the ``sharedlibrary'' command.
-It can be abbreviated ``share''.
-
-sharedlibrary REGEXP: Load shared object library symbols for files
- matching a unix regular expression. No argument
- indicates to load symbols for all shared libraries.
-
-info sharedlibrary: Status of loaded shared libraries.
-
-
- * Watchpoints
-
-A watchpoint stops execution of a program whenever the value of an
-expression changes. Checking for this slows down execution
-tremendously whenever you are in the scope of the expression, but is
-quite useful for catching tough ``bit-spreader'' or pointer misuse
-problems. Some machines such as the 386 have hardware for doing this
-more quickly, and future versions of gdb will use this hardware.
-
-watch EXP: Set a watchpoint (breakpoint) for an expression.
-
-info watchpoints: Information about your watchpoints.
-
-delete N: Deletes watchpoint number N (same as breakpoints).
-disable N: Temporarily turns off watchpoint number N (same as breakpoints).
-enable N: Re-enables watchpoint number N (same as breakpoints).
-
-
- * C++ multiple inheritance
-
-When used with a GCC version 2 compiler, GDB supports multiple inheritance
-for C++ programs.
-
- * C++ exception handling
-
-Gdb now supports limited C++ exception handling. Besides the existing
-ability to breakpoint on an exception handler, gdb can breakpoint on
-the raising of an exception (before the stack is peeled back to the
-handler's context).
-
-catch FOO: If there is a FOO exception handler in the dynamic scope,
- set a breakpoint to catch exceptions which may be raised there.
- Multiple exceptions (``catch foo bar baz'') may be caught.
-
-info catch: Lists all exceptions which may be caught in the
- current stack frame.
-
-
- * Minor command changes
-
-The command ``call func (arg, arg, ...)'' now acts like the print
-command, except it does not print or save a value if the function's result
-is void. This is similar to dbx usage.
-
-The ``up'' and ``down'' commands now always print the frame they end up
-at; ``up-silently'' and `down-silently'' can be used in scripts to change
-frames without printing.
-
- * New directory command
-
-'dir' now adds directories to the FRONT of the source search path.
-The path starts off empty. Source files that contain debug information
-about the directory in which they were compiled can be found even
-with an empty path; Sun CC and GCC include this information. If GDB can't
-find your source file in the current directory, type "dir .".
-
- * Configuring GDB for compilation
-
-For normal use, type ``./configure host''. See README or gdb.texinfo
-for more details.
-
-GDB now handles cross debugging. If you are remotely debugging between
-two different machines, type ``./configure host -target=targ''.
-Host is the machine where GDB will run; targ is the machine
-where the program that you are debugging will run.