diff options
Diffstat (limited to 'gas/config/tc-i960.c')
-rw-r--r-- | gas/config/tc-i960.c | 3231 |
1 files changed, 3231 insertions, 0 deletions
diff --git a/gas/config/tc-i960.c b/gas/config/tc-i960.c new file mode 100644 index 0000000..936b662 --- /dev/null +++ b/gas/config/tc-i960.c @@ -0,0 +1,3231 @@ +/* tc-i960.c - All the i80960-specific stuff + Copyright (C) 1989, 90, 91, 92, 93, 94, 95, 96, 97, 1998 + Free Software Foundation, Inc. + + This file is part of GAS. + + GAS is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + GAS is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GAS; see the file COPYING. If not, write to the Free + Software Foundation, 59 Temple Place - Suite 330, Boston, MA + 02111-1307, USA. */ + +/* See comment on md_parse_option for 80960-specific invocation options. */ + +/* There are 4 different lengths of (potentially) symbol-based displacements + in the 80960 instruction set, each of which could require address fix-ups + and (in the case of external symbols) emission of relocation directives: + + 32-bit (MEMB) + This is a standard length for the base assembler and requires no + special action. + + 13-bit (COBR) + This is a non-standard length, but the base assembler has a + hook for bit field address fixups: the fixS structure can + point to a descriptor of the field, in which case our + md_number_to_field() routine gets called to process it. + + I made the hook a little cleaner by having fix_new() (in the base + assembler) return a pointer to the fixS in question. And I made it a + little simpler by storing the field size (in this case 13) instead of + of a pointer to another structure: 80960 displacements are ALWAYS + stored in the low-order bits of a 4-byte word. + + Since the target of a COBR cannot be external, no relocation + directives for this size displacement have to be generated. + But the base assembler had to be modified to issue error + messages if the symbol did turn out to be external. + + 24-bit (CTRL) + Fixups are handled as for the 13-bit case (except that 24 is stored + in the fixS). + + The relocation directive generated is the same as that for the 32-bit + displacement, except that it's PC-relative (the 32-bit displacement + never is). The i80960 version of the linker needs a mod to + distinguish and handle the 24-bit case. + + 12-bit (MEMA) + MEMA formats are always promoted to MEMB (32-bit) if the displacement + is based on a symbol, because it could be relocated at link time. + The only time we use the 12-bit format is if an absolute value of + less than 4096 is specified, in which case we need neither a fixup nor + a relocation directive. */ + +#include <stdio.h> +#include <ctype.h> + +#include "as.h" + +#include "obstack.h" + +#include "opcode/i960.h" + +#if defined (OBJ_AOUT) || defined (OBJ_BOUT) + +#define TC_S_IS_SYSPROC(s) ((1<=S_GET_OTHER(s)) && (S_GET_OTHER(s)<=32)) +#define TC_S_IS_BALNAME(s) (S_GET_OTHER(s) == N_BALNAME) +#define TC_S_IS_CALLNAME(s) (S_GET_OTHER(s) == N_CALLNAME) +#define TC_S_IS_BADPROC(s) ((S_GET_OTHER(s) != 0) && !TC_S_IS_CALLNAME(s) && !TC_S_IS_BALNAME(s) && !TC_S_IS_SYSPROC(s)) + +#define TC_S_SET_SYSPROC(s, p) (S_SET_OTHER((s), (p)+1)) +#define TC_S_GET_SYSPROC(s) (S_GET_OTHER(s)-1) + +#define TC_S_FORCE_TO_BALNAME(s) (S_SET_OTHER((s), N_BALNAME)) +#define TC_S_FORCE_TO_CALLNAME(s) (S_SET_OTHER((s), N_CALLNAME)) +#define TC_S_FORCE_TO_SYSPROC(s) {;} + +#else /* ! OBJ_A/BOUT */ +#ifdef OBJ_COFF + +#define TC_S_IS_SYSPROC(s) (S_GET_STORAGE_CLASS(s) == C_SCALL) +#define TC_S_IS_BALNAME(s) (SF_GET_BALNAME(s)) +#define TC_S_IS_CALLNAME(s) (SF_GET_CALLNAME(s)) +#define TC_S_IS_BADPROC(s) (TC_S_IS_SYSPROC(s) && TC_S_GET_SYSPROC(s) < 0 && 31 < TC_S_GET_SYSPROC(s)) + +#define TC_S_SET_SYSPROC(s, p) ((s)->sy_symbol.ost_auxent[1].x_sc.x_stindx = (p)) +#define TC_S_GET_SYSPROC(s) ((s)->sy_symbol.ost_auxent[1].x_sc.x_stindx) + +#define TC_S_FORCE_TO_BALNAME(s) (SF_SET_BALNAME(s)) +#define TC_S_FORCE_TO_CALLNAME(s) (SF_SET_CALLNAME(s)) +#define TC_S_FORCE_TO_SYSPROC(s) (S_SET_STORAGE_CLASS((s), C_SCALL)) + +#else /* ! OBJ_COFF */ +you lose; +#endif /* ! OBJ_COFF */ +#endif /* ! OBJ_A/BOUT */ + +extern char *input_line_pointer; + +#if !defined (BFD_ASSEMBLER) && !defined (BFD) +#ifdef OBJ_COFF +const int md_reloc_size = sizeof (struct reloc); +#else /* OBJ_COFF */ +const int md_reloc_size = sizeof (struct relocation_info); +#endif /* OBJ_COFF */ +#endif + +/* Local i80960 routines. */ + +static void brcnt_emit (); /* Emit branch-prediction instrumentation code */ +static char *brlab_next (); /* Return next branch local label */ +void brtab_emit (); /* Emit br-predict instrumentation table */ +static void cobr_fmt (); /* Generate COBR instruction */ +static void ctrl_fmt (); /* Generate CTRL instruction */ +static char *emit (); /* Emit (internally) binary */ +static int get_args (); /* Break arguments out of comma-separated list */ +static void get_cdisp (); /* Handle COBR or CTRL displacement */ +static char *get_ispec (); /* Find index specification string */ +static int get_regnum (); /* Translate text to register number */ +static int i_scan (); /* Lexical scan of instruction source */ +static void mem_fmt (); /* Generate MEMA or MEMB instruction */ +static void mema_to_memb (); /* Convert MEMA instruction to MEMB format */ +static void parse_expr (); /* Parse an expression */ +static int parse_ldconst (); /* Parse and replace a 'ldconst' pseudo-op */ +static void parse_memop (); /* Parse a memory operand */ +static void parse_po (); /* Parse machine-dependent pseudo-op */ +static void parse_regop (); /* Parse a register operand */ +static void reg_fmt (); /* Generate a REG format instruction */ +void reloc_callj (); /* Relocate a 'callj' instruction */ +static void relax_cobr (); /* "De-optimize" cobr into compare/branch */ +static void s_leafproc (); /* Process '.leafproc' pseudo-op */ +static void s_sysproc (); /* Process '.sysproc' pseudo-op */ +static int shift_ok (); /* Will a 'shlo' substiture for a 'ldconst'? */ +static void syntax (); /* Give syntax error */ +static int targ_has_sfr (); /* Target chip supports spec-func register? */ +static int targ_has_iclass (); /* Target chip supports instruction set? */ + +/* See md_parse_option() for meanings of these options */ +static char norelax; /* True if -norelax switch seen */ +static char instrument_branches; /* True if -b switch seen */ + +/* Characters that always start a comment. + If the pre-processor is disabled, these aren't very useful. + */ +const char comment_chars[] = "#"; + +/* Characters that only start a comment at the beginning of + a line. If the line seems to have the form '# 123 filename' + .line and .file directives will appear in the pre-processed output. + + Note that input_file.c hand checks for '#' at the beginning of the + first line of the input file. This is because the compiler outputs + #NO_APP at the beginning of its output. + */ + +/* Also note that comments started like this one will always work. */ + +const char line_comment_chars[1]; + +const char line_separator_chars[1]; + +/* Chars that can be used to separate mant from exp in floating point nums */ +const char EXP_CHARS[] = "eE"; + +/* Chars that mean this number is a floating point constant, + as in 0f12.456 or 0d1.2345e12 + */ +const char FLT_CHARS[] = "fFdDtT"; + + +/* Table used by base assembler to relax addresses based on varying length + instructions. The fields are: + 1) most positive reach of this state, + 2) most negative reach of this state, + 3) how many bytes this mode will add to the size of the current frag + 4) which index into the table to try if we can't fit into this one. + + For i80960, the only application is the (de-)optimization of cobr + instructions into separate compare and branch instructions when a 13-bit + displacement won't hack it. + */ +const relax_typeS md_relax_table[] = +{ + {0, 0, 0, 0}, /* State 0 => no more relaxation possible */ + {4088, -4096, 0, 2}, /* State 1: conditional branch (cobr) */ + {0x800000 - 8, -0x800000, 4, 0}, /* State 2: compare (reg) & branch (ctrl) */ +}; + +static void s_endian PARAMS ((int)); + +/* These are the machine dependent pseudo-ops. + + This table describes all the machine specific pseudo-ops the assembler + has to support. The fields are: + pseudo-op name without dot + function to call to execute this pseudo-op + integer arg to pass to the function + */ +#define S_LEAFPROC 1 +#define S_SYSPROC 2 + +const pseudo_typeS md_pseudo_table[] = +{ + {"bss", s_lcomm, 1}, + {"endian", s_endian, 0}, + {"extended", float_cons, 't'}, + {"leafproc", parse_po, S_LEAFPROC}, + {"sysproc", parse_po, S_SYSPROC}, + + {"word", cons, 4}, + {"quad", cons, 16}, + + {0, 0, 0} +}; + +/* Macros to extract info from an 'expressionS' structure 'e' */ +#define adds(e) e.X_add_symbol +#define offs(e) e.X_add_number + + +/* Branch-prediction bits for CTRL/COBR format opcodes */ +#define BP_MASK 0x00000002 /* Mask for branch-prediction bit */ +#define BP_TAKEN 0x00000000 /* Value to OR in to predict branch */ +#define BP_NOT_TAKEN 0x00000002 /* Value to OR in to predict no branch */ + + +/* Some instruction opcodes that we need explicitly */ +#define BE 0x12000000 +#define BG 0x11000000 +#define BGE 0x13000000 +#define BL 0x14000000 +#define BLE 0x16000000 +#define BNE 0x15000000 +#define BNO 0x10000000 +#define BO 0x17000000 +#define CHKBIT 0x5a002700 +#define CMPI 0x5a002080 +#define CMPO 0x5a002000 + +#define B 0x08000000 +#define BAL 0x0b000000 +#define CALL 0x09000000 +#define CALLS 0x66003800 +#define RET 0x0a000000 + + +/* These masks are used to build up a set of MEMB mode bits. */ +#define A_BIT 0x0400 +#define I_BIT 0x0800 +#define MEMB_BIT 0x1000 +#define D_BIT 0x2000 + + +/* Mask for the only mode bit in a MEMA instruction (if set, abase reg is + used). */ +#define MEMA_ABASE 0x2000 + +/* Info from which a MEMA or MEMB format instruction can be generated */ +typedef struct + { + /* (First) 32 bits of instruction */ + long opcode; + /* 0-(none), 12- or, 32-bit displacement needed */ + int disp; + /* The expression in the source instruction from which the + displacement should be determined. */ + char *e; + } + +memS; + + +/* The two pieces of info we need to generate a register operand */ +struct regop + { + int mode; /* 0 =>local/global/spec reg; 1=> literal or fp reg */ + int special; /* 0 =>not a sfr; 1=> is a sfr (not valid w/mode=0) */ + int n; /* Register number or literal value */ + }; + + +/* Number and assembler mnemonic for all registers that can appear in + operands. */ +static const struct + { + char *reg_name; + int reg_num; + } +regnames[] = +{ + { "pfp", 0 }, + { "sp", 1 }, + { "rip", 2 }, + { "r3", 3 }, + { "r4", 4 }, + { "r5", 5 }, + { "r6", 6 }, + { "r7", 7 }, + { "r8", 8 }, + { "r9", 9 }, + { "r10", 10 }, + { "r11", 11 }, + { "r12", 12 }, + { "r13", 13 }, + { "r14", 14 }, + { "r15", 15 }, + { "g0", 16 }, + { "g1", 17 }, + { "g2", 18 }, + { "g3", 19 }, + { "g4", 20 }, + { "g5", 21 }, + { "g6", 22 }, + { "g7", 23 }, + { "g8", 24 }, + { "g9", 25 }, + { "g10", 26 }, + { "g11", 27 }, + { "g12", 28 }, + { "g13", 29 }, + { "g14", 30 }, + { "fp", 31 }, + + /* Numbers for special-function registers are for assembler internal + use only: they are scaled back to range [0-31] for binary output. */ +#define SF0 32 + + { "sf0", 32 }, + { "sf1", 33 }, + { "sf2", 34 }, + { "sf3", 35 }, + { "sf4", 36 }, + { "sf5", 37 }, + { "sf6", 38 }, + { "sf7", 39 }, + { "sf8", 40 }, + { "sf9", 41 }, + { "sf10", 42 }, + { "sf11", 43 }, + { "sf12", 44 }, + { "sf13", 45 }, + { "sf14", 46 }, + { "sf15", 47 }, + { "sf16", 48 }, + { "sf17", 49 }, + { "sf18", 50 }, + { "sf19", 51 }, + { "sf20", 52 }, + { "sf21", 53 }, + { "sf22", 54 }, + { "sf23", 55 }, + { "sf24", 56 }, + { "sf25", 57 }, + { "sf26", 58 }, + { "sf27", 59 }, + { "sf28", 60 }, + { "sf29", 61 }, + { "sf30", 62 }, + { "sf31", 63 }, + + /* Numbers for floating point registers are for assembler internal + use only: they are scaled back to [0-3] for binary output. */ +#define FP0 64 + + { "fp0", 64 }, + { "fp1", 65 }, + { "fp2", 66 }, + { "fp3", 67 }, + + { NULL, 0 }, /* END OF LIST */ +}; + +#define IS_RG_REG(n) ((0 <= (n)) && ((n) < SF0)) +#define IS_SF_REG(n) ((SF0 <= (n)) && ((n) < FP0)) +#define IS_FP_REG(n) ((n) >= FP0) + +/* Number and assembler mnemonic for all registers that can appear as + 'abase' (indirect addressing) registers. */ +static const struct + { + char *areg_name; + int areg_num; + } +aregs[] = +{ + { "(pfp)", 0 }, + { "(sp)", 1 }, + { "(rip)", 2 }, + { "(r3)", 3 }, + { "(r4)", 4 }, + { "(r5)", 5 }, + { "(r6)", 6 }, + { "(r7)", 7 }, + { "(r8)", 8 }, + { "(r9)", 9 }, + { "(r10)", 10 }, + { "(r11)", 11 }, + { "(r12)", 12 }, + { "(r13)", 13 }, + { "(r14)", 14 }, + { "(r15)", 15 }, + { "(g0)", 16 }, + { "(g1)", 17 }, + { "(g2)", 18 }, + { "(g3)", 19 }, + { "(g4)", 20 }, + { "(g5)", 21 }, + { "(g6)", 22 }, + { "(g7)", 23 }, + { "(g8)", 24 }, + { "(g9)", 25 }, + { "(g10)", 26 }, + { "(g11)", 27 }, + { "(g12)", 28 }, + { "(g13)", 29 }, + { "(g14)", 30 }, + { "(fp)", 31 }, + +#define IPREL 32 + /* For assembler internal use only: this number never appears in binary + output. */ + { "(ip)", IPREL }, + + { NULL, 0 }, /* END OF LIST */ +}; + + +/* Hash tables */ +static struct hash_control *op_hash; /* Opcode mnemonics */ +static struct hash_control *reg_hash; /* Register name hash table */ +static struct hash_control *areg_hash; /* Abase register hash table */ + + +/* Architecture for which we are assembling */ +#define ARCH_ANY 0 /* Default: no architecture checking done */ +#define ARCH_KA 1 +#define ARCH_KB 2 +#define ARCH_MC 3 +#define ARCH_CA 4 +#define ARCH_JX 5 +#define ARCH_HX 6 +int architecture = ARCH_ANY; /* Architecture requested on invocation line */ +int iclasses_seen; /* OR of instruction classes (I_* constants) + * for which we've actually assembled + * instructions. + */ + + +/* BRANCH-PREDICTION INSTRUMENTATION + + The following supports generation of branch-prediction instrumentation + (turned on by -b switch). The instrumentation collects counts + of branches taken/not-taken for later input to a utility that will + set the branch prediction bits of the instructions in accordance with + the behavior observed. (Note that the KX series does not have + brach-prediction.) + + The instrumentation consists of: + + (1) before and after each conditional branch, a call to an external + routine that increments and steps over an inline counter. The + counter itself, initialized to 0, immediately follows the call + instruction. For each branch, the counter following the branch + is the number of times the branch was not taken, and the difference + between the counters is the number of times it was taken. An + example of an instrumented conditional branch: + + call BR_CNT_FUNC + .word 0 + LBRANCH23: be label + call BR_CNT_FUNC + .word 0 + + (2) a table of pointers to the instrumented branches, so that an + external postprocessing routine can locate all of the counters. + the table begins with a 2-word header: a pointer to the next in + a linked list of such tables (initialized to 0); and a count + of the number of entries in the table (exclusive of the header. + + Note that input source code is expected to already contain calls + an external routine that will link the branch local table into a + list of such tables. + */ + +/* Number of branches instrumented so far. Also used to generate + unique local labels for each instrumented branch. */ +static int br_cnt; + +#define BR_LABEL_BASE "LBRANCH" +/* Basename of local labels on instrumented branches, to avoid + conflict with compiler- generated local labels. */ + +#define BR_CNT_FUNC "__inc_branch" +/* Name of the external routine that will increment (and step over) an + inline counter. */ + +#define BR_TAB_NAME "__BRANCH_TABLE__" +/* Name of the table of pointers to branches. A local (i.e., + non-external) symbol. */ + +/***************************************************************************** + md_begin: One-time initialization. + + Set up hash tables. + + *************************************************************************** */ +void +md_begin () +{ + int i; /* Loop counter */ + const struct i960_opcode *oP; /* Pointer into opcode table */ + const char *retval; /* Value returned by hash functions */ + + op_hash = hash_new (); + reg_hash = hash_new (); + areg_hash = hash_new (); + + /* For some reason, the base assembler uses an empty string for "no + error message", instead of a NULL pointer. */ + retval = 0; + + for (oP = i960_opcodes; oP->name && !retval; oP++) + retval = hash_insert (op_hash, oP->name, (PTR) oP); + + for (i = 0; regnames[i].reg_name && !retval; i++) + retval = hash_insert (reg_hash, regnames[i].reg_name, + (char *) ®names[i].reg_num); + + for (i = 0; aregs[i].areg_name && !retval; i++) + retval = hash_insert (areg_hash, aregs[i].areg_name, + (char *) &aregs[i].areg_num); + + if (retval) + as_fatal (_("Hashing returned \"%s\"."), retval); +} + +/***************************************************************************** + md_assemble: Assemble an instruction + + Assumptions about the passed-in text: + - all comments, labels removed + - text is an instruction + - all white space compressed to single blanks + - all character constants have been replaced with decimal + + *************************************************************************** */ +void +md_assemble (textP) + char *textP; /* Source text of instruction */ +{ + /* Parsed instruction text, containing NO whitespace: arg[0]->opcode + mnemonic arg[1-3]->operands, with char constants replaced by + decimal numbers. */ + char *args[4]; + + int n_ops; /* Number of instruction operands */ + /* Pointer to instruction description */ + struct i960_opcode *oP; + /* TRUE iff opcode mnemonic included branch-prediction suffix (".f" + or ".t"). */ + int branch_predict; + /* Setting of branch-prediction bit(s) to be OR'd into instruction + opcode of CTRL/COBR format instructions. */ + long bp_bits; + + int n; /* Offset of last character in opcode mnemonic */ + + const char *bp_error_msg = _("branch prediction invalid on this opcode"); + + + /* Parse instruction into opcode and operands */ + memset (args, '\0', sizeof (args)); + n_ops = i_scan (textP, args); + if (n_ops == -1) + { + return; /* Error message already issued */ + } + + /* Do "macro substitution" (sort of) on 'ldconst' pseudo-instruction */ + if (!strcmp (args[0], "ldconst")) + { + n_ops = parse_ldconst (args); + if (n_ops == -1) + { + return; + } + } + + + + /* Check for branch-prediction suffix on opcode mnemonic, strip it off */ + n = strlen (args[0]) - 1; + branch_predict = 0; + bp_bits = 0; + if (args[0][n - 1] == '.' && (args[0][n] == 't' || args[0][n] == 'f')) + { + /* We could check here to see if the target architecture + supports branch prediction, but why bother? The bit will + just be ignored by processors that don't use it. */ + branch_predict = 1; + bp_bits = (args[0][n] == 't') ? BP_TAKEN : BP_NOT_TAKEN; + args[0][n - 1] = '\0'; /* Strip suffix from opcode mnemonic */ + } + + /* Look up opcode mnemonic in table and check number of operands. + Check that opcode is legal for the target architecture. If all + looks good, assemble instruction. */ + oP = (struct i960_opcode *) hash_find (op_hash, args[0]); + if (!oP || !targ_has_iclass (oP->iclass)) + { + as_bad (_("invalid opcode, \"%s\"."), args[0]); + + } + else if (n_ops != oP->num_ops) + { + as_bad (_("improper number of operands. expecting %d, got %d"), + oP->num_ops, n_ops); + } + else + { + switch (oP->format) + { + case FBRA: + case CTRL: + ctrl_fmt (args[1], oP->opcode | bp_bits, oP->num_ops); + if (oP->format == FBRA) + { + /* Now generate a 'bno' to same arg */ + ctrl_fmt (args[1], BNO | bp_bits, 1); + } + break; + case COBR: + case COJ: + cobr_fmt (args, oP->opcode | bp_bits, oP); + break; + case REG: + if (branch_predict) + { + as_warn (bp_error_msg); + } + reg_fmt (args, oP); + break; + case MEM1: + if (args[0][0] == 'c' && args[0][1] == 'a') + { + if (branch_predict) + { + as_warn (bp_error_msg); + } + mem_fmt (args, oP, 1); + break; + } + case MEM2: + case MEM4: + case MEM8: + case MEM12: + case MEM16: + if (branch_predict) + { + as_warn (bp_error_msg); + } + mem_fmt (args, oP, 0); + break; + case CALLJ: + if (branch_predict) + { + as_warn (bp_error_msg); + } + /* Output opcode & set up "fixup" (relocation); flag + relocation as 'callj' type. */ + know (oP->num_ops == 1); + get_cdisp (args[1], "CTRL", oP->opcode, 24, 0, 1); + break; + default: + BAD_CASE (oP->format); + break; + } + } +} /* md_assemble() */ + +/***************************************************************************** + md_number_to_chars: convert a number to target byte order + + *************************************************************************** */ +void +md_number_to_chars (buf, value, n) + char *buf; + valueT value; + int n; +{ + number_to_chars_littleendian (buf, value, n); +} + +/***************************************************************************** + md_chars_to_number: convert from target byte order to host byte order. + + *************************************************************************** */ +int +md_chars_to_number (val, n) + unsigned char *val; /* Value in target byte order */ + int n; /* Number of bytes in the input */ +{ + int retval; + + for (retval = 0; n--;) + { + retval <<= 8; + retval |= val[n]; + } + return retval; +} + + +#define MAX_LITTLENUMS 6 +#define LNUM_SIZE sizeof(LITTLENUM_TYPE) + +/***************************************************************************** + md_atof: convert ascii to floating point + + Turn a string at input_line_pointer into a floating point constant of type + 'type', and store the appropriate bytes at *litP. The number of LITTLENUMS + emitted is returned at 'sizeP'. An error message is returned, or a pointer + to an empty message if OK. + + Note we call the i386 floating point routine, rather than complicating + things with more files or symbolic links. + + *************************************************************************** */ +char * +md_atof (type, litP, sizeP) + int type; + char *litP; + int *sizeP; +{ + LITTLENUM_TYPE words[MAX_LITTLENUMS]; + LITTLENUM_TYPE *wordP; + int prec; + char *t; + char *atof_ieee (); + + switch (type) + { + case 'f': + case 'F': + prec = 2; + break; + + case 'd': + case 'D': + prec = 4; + break; + + case 't': + case 'T': + prec = 5; + type = 'x'; /* That's what atof_ieee() understands */ + break; + + default: + *sizeP = 0; + return _("Bad call to md_atof()"); + } + + t = atof_ieee (input_line_pointer, type, words); + if (t) + { + input_line_pointer = t; + } + + *sizeP = prec * LNUM_SIZE; + + /* Output the LITTLENUMs in REVERSE order in accord with i80960 + word-order. (Dunno why atof_ieee doesn't do it in the right + order in the first place -- probably because it's a hack of + atof_m68k.) */ + + for (wordP = words + prec - 1; prec--;) + { + md_number_to_chars (litP, (long) (*wordP--), LNUM_SIZE); + litP += sizeof (LITTLENUM_TYPE); + } + + return 0; +} + + +/***************************************************************************** + md_number_to_imm + + *************************************************************************** */ +void +md_number_to_imm (buf, val, n) + char *buf; + long val; + int n; +{ + md_number_to_chars (buf, val, n); +} + + +/***************************************************************************** + md_number_to_disp + + *************************************************************************** */ +void +md_number_to_disp (buf, val, n) + char *buf; + long val; + int n; +{ + md_number_to_chars (buf, val, n); +} + +/***************************************************************************** + md_number_to_field: + + Stick a value (an address fixup) into a bit field of + previously-generated instruction. + + *************************************************************************** */ +void +md_number_to_field (instrP, val, bfixP) + char *instrP; /* Pointer to instruction to be fixed */ + long val; /* Address fixup value */ + bit_fixS *bfixP; /* Description of bit field to be fixed up */ +{ + int numbits; /* Length of bit field to be fixed */ + long instr; /* 32-bit instruction to be fixed-up */ + long sign; /* 0 or -1, according to sign bit of 'val' */ + + /* Convert instruction back to host byte order. */ + instr = md_chars_to_number (instrP, 4); + + /* Surprise! -- we stored the number of bits to be modified rather + than a pointer to a structure. */ + numbits = (int) bfixP; + if (numbits == 1) + { + /* This is a no-op, stuck here by reloc_callj() */ + return; + } + + know ((numbits == 13) || (numbits == 24)); + + /* Propagate sign bit of 'val' for the given number of bits. Result + should be all 0 or all 1. */ + sign = val >> ((int) numbits - 1); + if (((val < 0) && (sign != -1)) + || ((val > 0) && (sign != 0))) + { + as_bad (_("Fixup of %ld too large for field width of %d"), + val, numbits); + } + else + { + /* Put bit field into instruction and write back in target + * byte order. + */ + val &= ~(-1 << (int) numbits); /* Clear unused sign bits */ + instr |= val; + md_number_to_chars (instrP, instr, 4); + } +} /* md_number_to_field() */ + + +/***************************************************************************** + md_parse_option + Invocation line includes a switch not recognized by the base assembler. + See if it's a processor-specific option. For the 960, these are: + + -norelax: + Conditional branch instructions that require displacements + greater than 13 bits (or that have external targets) should + generate errors. The default is to replace each such + instruction with the corresponding compare (or chkbit) and + branch instructions. Note that the Intel "j" cobr directives + are ALWAYS "de-optimized" in this way when necessary, + regardless of the setting of this option. + + -b: + Add code to collect information about branches taken, for + later optimization of branch prediction bits by a separate + tool. COBR and CNTL format instructions have branch + prediction bits (in the CX architecture); if "BR" represents + an instruction in one of these classes, the following rep- + resents the code generated by the assembler: + + call <increment routine> + .word 0 # pre-counter + Label: BR + call <increment routine> + .word 0 # post-counter + + A table of all such "Labels" is also generated. + + + -AKA, -AKB, -AKC, -ASA, -ASB, -AMC, -ACA: + Select the 80960 architecture. Instructions or features not + supported by the selected architecture cause fatal errors. + The default is to generate code for any instruction or feature + that is supported by SOME version of the 960 (even if this + means mixing architectures!). + + ****************************************************************************/ + +CONST char *md_shortopts = "A:b"; +struct option md_longopts[] = +{ +#define OPTION_LINKRELAX (OPTION_MD_BASE) + {"linkrelax", no_argument, NULL, OPTION_LINKRELAX}, + {"link-relax", no_argument, NULL, OPTION_LINKRELAX}, +#define OPTION_NORELAX (OPTION_MD_BASE + 1) + {"norelax", no_argument, NULL, OPTION_NORELAX}, + {"no-relax", no_argument, NULL, OPTION_NORELAX}, + {NULL, no_argument, NULL, 0} +}; +size_t md_longopts_size = sizeof (md_longopts); + +struct tabentry + { + char *flag; + int arch; + }; +static const struct tabentry arch_tab[] = +{ + {"KA", ARCH_KA}, + {"KB", ARCH_KB}, + {"SA", ARCH_KA}, /* Synonym for KA */ + {"SB", ARCH_KB}, /* Synonym for KB */ + {"KC", ARCH_MC}, /* Synonym for MC */ + {"MC", ARCH_MC}, + {"CA", ARCH_CA}, + {"JX", ARCH_JX}, + {"HX", ARCH_HX}, + {NULL, 0} +}; + +int +md_parse_option (c, arg) + int c; + char *arg; +{ + switch (c) + { + case OPTION_LINKRELAX: + linkrelax = 1; + flag_keep_locals = 1; + break; + + case OPTION_NORELAX: + norelax = 1; + break; + + case 'b': + instrument_branches = 1; + break; + + case 'A': + { + const struct tabentry *tp; + char *p = arg; + + for (tp = arch_tab; tp->flag != NULL; tp++) + if (!strcmp (p, tp->flag)) + break; + + if (tp->flag == NULL) + { + as_bad (_("invalid architecture %s"), p); + return 0; + } + else + architecture = tp->arch; + } + break; + + default: + return 0; + } + + return 1; +} + +void +md_show_usage (stream) + FILE *stream; +{ + int i; + fprintf (stream, _("I960 options:\n")); + for (i = 0; arch_tab[i].flag; i++) + fprintf (stream, "%s-A%s", i ? " | " : "", arch_tab[i].flag); + fprintf (stream, _("\n\ + specify variant of 960 architecture\n\ +-b add code to collect statistics about branches taken\n\ +-link-relax preserve individual alignment directives so linker\n\ + can do relaxing (b.out format only)\n\ +-no-relax don't alter compare-and-branch instructions for\n\ + long displacements\n")); +} + + +#ifndef BFD_ASSEMBLER +/***************************************************************************** + md_convert_frag: + Called by base assembler after address relaxation is finished: modify + variable fragments according to how much relaxation was done. + + If the fragment substate is still 1, a 13-bit displacement was enough + to reach the symbol in question. Set up an address fixup, but otherwise + leave the cobr instruction alone. + + If the fragment substate is 2, a 13-bit displacement was not enough. + Replace the cobr with a two instructions (a compare and a branch). + + *************************************************************************** */ +void +md_convert_frag (headers, seg, fragP) + object_headers *headers; + segT seg; + fragS *fragP; +{ + fixS *fixP; /* Structure describing needed address fix */ + + switch (fragP->fr_subtype) + { + case 1: + /* LEAVE SINGLE COBR INSTRUCTION */ + fixP = fix_new (fragP, + fragP->fr_opcode - fragP->fr_literal, + 4, + fragP->fr_symbol, + fragP->fr_offset, + 1, + NO_RELOC); + + fixP->fx_bit_fixP = (bit_fixS *) 13; /* size of bit field */ + break; + case 2: + /* REPLACE COBR WITH COMPARE/BRANCH INSTRUCTIONS */ + relax_cobr (fragP); + break; + default: + BAD_CASE (fragP->fr_subtype); + break; + } +} + +/***************************************************************************** + md_estimate_size_before_relax: How much does it look like *fragP will grow? + + Called by base assembler just before address relaxation. + Return the amount by which the fragment will grow. + + Any symbol that is now undefined will not become defined; cobr's + based on undefined symbols will have to be replaced with a compare + instruction and a branch instruction, and the code fragment will grow + by 4 bytes. + + *************************************************************************** */ +int +md_estimate_size_before_relax (fragP, segment_type) + register fragS *fragP; + register segT segment_type; +{ + /* If symbol is undefined in this segment, go to "relaxed" state + (compare and branch instructions instead of cobr) right now. */ + if (S_GET_SEGMENT (fragP->fr_symbol) != segment_type) + { + relax_cobr (fragP); + return 4; + } + return 0; +} /* md_estimate_size_before_relax() */ + + +/***************************************************************************** + md_ri_to_chars: + This routine exists in order to overcome machine byte-order problems + when dealing with bit-field entries in the relocation_info struct. + + But relocation info will be used on the host machine only (only + executable code is actually downloaded to the i80960). Therefore, + we leave it in host byte order. + + The above comment is no longer true. This routine now really + does do the reordering (Ian Taylor 28 Aug 92). + + *************************************************************************** */ +void +md_ri_to_chars (where, ri) + char *where; + struct relocation_info *ri; +{ + md_number_to_chars (where, ri->r_address, + sizeof (ri->r_address)); + where[4] = ri->r_index & 0x0ff; + where[5] = (ri->r_index >> 8) & 0x0ff; + where[6] = (ri->r_index >> 16) & 0x0ff; + where[7] = ((ri->r_pcrel << 0) + | (ri->r_length << 1) + | (ri->r_extern << 3) + | (ri->r_bsr << 4) + | (ri->r_disp << 5) + | (ri->r_callj << 6)); +} + +#endif /* BFD_ASSEMBLER */ + +/* FOLLOWING ARE THE LOCAL ROUTINES, IN ALPHABETICAL ORDER */ + +/***************************************************************************** + brcnt_emit: Emit code to increment inline branch counter. + + See the comments above the declaration of 'br_cnt' for details on + branch-prediction instrumentation. + *************************************************************************** */ +static void +brcnt_emit () +{ + ctrl_fmt (BR_CNT_FUNC, CALL, 1); /* Emit call to "increment" routine */ + emit (0); /* Emit inline counter to be incremented */ +} + +/***************************************************************************** + brlab_next: generate the next branch local label + + See the comments above the declaration of 'br_cnt' for details on + branch-prediction instrumentation. + *************************************************************************** */ +static char * +brlab_next () +{ + static char buf[20]; + + sprintf (buf, "%s%d", BR_LABEL_BASE, br_cnt++); + return buf; +} + +/***************************************************************************** + brtab_emit: generate the fetch-prediction branch table. + + See the comments above the declaration of 'br_cnt' for details on + branch-prediction instrumentation. + + The code emitted here would be functionally equivalent to the following + example assembler source. + + .data + .align 2 + BR_TAB_NAME: + .word 0 # link to next table + .word 3 # length of table + .word LBRANCH0 # 1st entry in table proper + .word LBRANCH1 + .word LBRANCH2 + **************************************************************************** */ +void +brtab_emit () +{ + int i; + char buf[20]; + char *p; /* Where the binary was output to */ + /* Pointer to description of deferred address fixup. */ + fixS *fixP; + + if (!instrument_branches) + { + return; + } + + subseg_set (data_section, 0); /* .data */ + frag_align (2, 0, 0); /* .align 2 */ + record_alignment (now_seg, 2); + colon (BR_TAB_NAME); /* BR_TAB_NAME: */ + emit (0); /* .word 0 #link to next table */ + emit (br_cnt); /* .word n #length of table */ + + for (i = 0; i < br_cnt; i++) + { + sprintf (buf, "%s%d", BR_LABEL_BASE, i); + p = emit (0); + fixP = fix_new (frag_now, + p - frag_now->fr_literal, + 4, + symbol_find (buf), + 0, + 0, + NO_RELOC); + } +} + +/***************************************************************************** + cobr_fmt: generate a COBR-format instruction + + *************************************************************************** */ +static +void +cobr_fmt (arg, opcode, oP) + /* arg[0]->opcode mnemonic, arg[1-3]->operands (ascii) */ + char *arg[]; + /* Opcode, with branch-prediction bits already set if necessary. */ + long opcode; + /* Pointer to description of instruction. */ + struct i960_opcode *oP; +{ + long instr; /* 32-bit instruction */ + struct regop regop; /* Description of register operand */ + int n; /* Number of operands */ + int var_frag; /* 1 if varying length code fragment should + * be emitted; 0 if an address fix + * should be emitted. + */ + + instr = opcode; + n = oP->num_ops; + + if (n >= 1) + { + /* First operand (if any) of a COBR is always a register + operand. Parse it. */ + parse_regop (®op, arg[1], oP->operand[0]); + instr |= (regop.n << 19) | (regop.mode << 13); + } + if (n >= 2) + { + /* Second operand (if any) of a COBR is always a register + operand. Parse it. */ + parse_regop (®op, arg[2], oP->operand[1]); + instr |= (regop.n << 14) | regop.special; + } + + + if (n < 3) + { + emit (instr); + + } + else + { + if (instrument_branches) + { + brcnt_emit (); + colon (brlab_next ()); + } + + /* A third operand to a COBR is always a displacement. Parse + it; if it's relaxable (a cobr "j" directive, or any cobr + other than bbs/bbc when the "-norelax" option is not in use) + set up a variable code fragment; otherwise set up an address + fix. */ + var_frag = !norelax || (oP->format == COJ); /* TRUE or FALSE */ + get_cdisp (arg[3], "COBR", instr, 13, var_frag, 0); + + if (instrument_branches) + { + brcnt_emit (); + } + } +} /* cobr_fmt() */ + + +/***************************************************************************** + ctrl_fmt: generate a CTRL-format instruction + + *************************************************************************** */ +static +void +ctrl_fmt (targP, opcode, num_ops) + char *targP; /* Pointer to text of lone operand (if any) */ + long opcode; /* Template of instruction */ + int num_ops; /* Number of operands */ +{ + int instrument; /* TRUE iff we should add instrumentation to track + * how often the branch is taken + */ + + + if (num_ops == 0) + { + emit (opcode); /* Output opcode */ + } + else + { + + instrument = instrument_branches && (opcode != CALL) + && (opcode != B) && (opcode != RET) && (opcode != BAL); + + if (instrument) + { + brcnt_emit (); + colon (brlab_next ()); + } + + /* The operand MUST be an ip-relative displacment. Parse it + * and set up address fix for the instruction we just output. + */ + get_cdisp (targP, "CTRL", opcode, 24, 0, 0); + + if (instrument) + { + brcnt_emit (); + } + } + +} + + +/***************************************************************************** + emit: output instruction binary + + Output instruction binary, in target byte order, 4 bytes at a time. + Return pointer to where it was placed. + + *************************************************************************** */ +static +char * +emit (instr) + long instr; /* Word to be output, host byte order */ +{ + char *toP; /* Where to output it */ + + toP = frag_more (4); /* Allocate storage */ + md_number_to_chars (toP, instr, 4); /* Convert to target byte order */ + return toP; +} + + +/***************************************************************************** + get_args: break individual arguments out of comma-separated list + + Input assumptions: + - all comments and labels have been removed + - all strings of whitespace have been collapsed to a single blank. + - all character constants ('x') have been replaced with decimal + + Output: + args[0] is untouched. args[1] points to first operand, etc. All args: + - are NULL-terminated + - contain no whitespace + + Return value: + Number of operands (0,1,2, or 3) or -1 on error. + + *************************************************************************** */ +static int +get_args (p, args) + /* Pointer to comma-separated operands; MUCKED BY US */ + register char *p; + /* Output arg: pointers to operands placed in args[1-3]. MUST + ACCOMMODATE 4 ENTRIES (args[0-3]). */ + char *args[]; +{ + register int n; /* Number of operands */ + register char *to; + + /* Skip lead white space */ + while (*p == ' ') + { + p++; + } + + if (*p == '\0') + { + return 0; + } + + n = 1; + args[1] = p; + + /* Squeze blanks out by moving non-blanks toward start of string. + * Isolate operands, whenever comma is found. + */ + to = p; + while (*p != '\0') + { + + if (*p == ' ' + && (! isalnum ((unsigned char) p[1]) + || ! isalnum ((unsigned char) p[-1]))) + { + p++; + + } + else if (*p == ',') + { + + /* Start of operand */ + if (n == 3) + { + as_bad (_("too many operands")); + return -1; + } + *to++ = '\0'; /* Terminate argument */ + args[++n] = to; /* Start next argument */ + p++; + + } + else + { + *to++ = *p++; + } + } + *to = '\0'; + return n; +} + + +/***************************************************************************** + get_cdisp: handle displacement for a COBR or CTRL instruction. + + Parse displacement for a COBR or CTRL instruction. + + If successful, output the instruction opcode and set up for it, + depending on the arg 'var_frag', either: + o an address fixup to be done when all symbol values are known, or + o a varying length code fragment, with address fixup info. This + will be done for cobr instructions that may have to be relaxed + in to compare/branch instructions (8 bytes) if the final + address displacement is greater than 13 bits. + + ****************************************************************************/ +static +void +get_cdisp (dispP, ifmtP, instr, numbits, var_frag, callj) + /* displacement as specified in source instruction */ + char *dispP; + /* "COBR" or "CTRL" (for use in error message) */ + char *ifmtP; + /* Instruction needing the displacement */ + long instr; + /* # bits of displacement (13 for COBR, 24 for CTRL) */ + int numbits; + /* 1 if varying length code fragment should be emitted; + * 0 if an address fix should be emitted. + */ + int var_frag; + /* 1 if callj relocation should be done; else 0 */ + int callj; +{ + expressionS e; /* Parsed expression */ + fixS *fixP; /* Structure describing needed address fix */ + char *outP; /* Where instruction binary is output to */ + + fixP = NULL; + + parse_expr (dispP, &e); + switch (e.X_op) + { + case O_illegal: + as_bad (_("expression syntax error")); + + case O_symbol: + if (S_GET_SEGMENT (e.X_add_symbol) == now_seg + || S_GET_SEGMENT (e.X_add_symbol) == undefined_section) + { + if (var_frag) + { + outP = frag_more (8); /* Allocate worst-case storage */ + md_number_to_chars (outP, instr, 4); + frag_variant (rs_machine_dependent, 4, 4, 1, + adds (e), offs (e), outP); + } + else + { + /* Set up a new fix structure, so address can be updated + * when all symbol values are known. + */ + outP = emit (instr); + fixP = fix_new (frag_now, + outP - frag_now->fr_literal, + 4, + adds (e), + offs (e), + 1, + NO_RELOC); + + fixP->fx_tcbit = callj; + + /* We want to modify a bit field when the address is + * known. But we don't need all the garbage in the + * bit_fix structure. So we're going to lie and store + * the number of bits affected instead of a pointer. + */ + fixP->fx_bit_fixP = (bit_fixS *) numbits; + } + } + else + as_bad (_("attempt to branch into different segment")); + break; + + default: + as_bad (_("target of %s instruction must be a label"), ifmtP); + break; + } +} + + +/***************************************************************************** + get_ispec: parse a memory operand for an index specification + + Here, an "index specification" is taken to be anything surrounded + by square brackets and NOT followed by anything else. + + If it's found, detach it from the input string, remove the surrounding + square brackets, and return a pointer to it. Otherwise, return NULL. + + *************************************************************************** */ +static +char * +get_ispec (textP) + /* Pointer to memory operand from source instruction, no white space. */ + char *textP; +{ + /* Points to start of index specification. */ + char *start; + /* Points to end of index specification. */ + char *end; + + /* Find opening square bracket, if any. */ + start = strchr (textP, '['); + + if (start != NULL) + { + + /* Eliminate '[', detach from rest of operand */ + *start++ = '\0'; + + end = strchr (start, ']'); + + if (end == NULL) + { + as_bad (_("unmatched '['")); + + } + else + { + /* Eliminate ']' and make sure it was the last thing + * in the string. + */ + *end = '\0'; + if (*(end + 1) != '\0') + { + as_bad (_("garbage after index spec ignored")); + } + } + } + return start; +} + +/***************************************************************************** + get_regnum: + + Look up a (suspected) register name in the register table and return the + associated register number (or -1 if not found). + + *************************************************************************** */ +static +int +get_regnum (regname) + char *regname; /* Suspected register name */ +{ + int *rP; + + rP = (int *) hash_find (reg_hash, regname); + return (rP == NULL) ? -1 : *rP; +} + + +/***************************************************************************** + i_scan: perform lexical scan of ascii assembler instruction. + + Input assumptions: + - input string is an i80960 instruction (not a pseudo-op) + - all comments and labels have been removed + - all strings of whitespace have been collapsed to a single blank. + + Output: + args[0] points to opcode, other entries point to operands. All strings: + - are NULL-terminated + - contain no whitespace + - have character constants ('x') replaced with a decimal number + + Return value: + Number of operands (0,1,2, or 3) or -1 on error. + + *************************************************************************** */ +static int +i_scan (iP, args) + /* Pointer to ascii instruction; MUCKED BY US. */ + register char *iP; + /* Output arg: pointers to opcode and operands placed here. MUST + ACCOMMODATE 4 ENTRIES. */ + char *args[]; +{ + + /* Isolate opcode */ + if (*(iP) == ' ') + { + iP++; + } /* Skip lead space, if any */ + args[0] = iP; + for (; *iP != ' '; iP++) + { + if (*iP == '\0') + { + /* There are no operands */ + if (args[0] == iP) + { + /* We never moved: there was no opcode either! */ + as_bad (_("missing opcode")); + return -1; + } + return 0; + } + } + *iP++ = '\0'; /* Terminate opcode */ + return (get_args (iP, args)); +} /* i_scan() */ + + +/***************************************************************************** + mem_fmt: generate a MEMA- or MEMB-format instruction + + *************************************************************************** */ +static void +mem_fmt (args, oP, callx) + char *args[]; /* args[0]->opcode mnemonic, args[1-3]->operands */ + struct i960_opcode *oP; /* Pointer to description of instruction */ + int callx; /* Is this a callx opcode */ +{ + int i; /* Loop counter */ + struct regop regop; /* Description of register operand */ + char opdesc; /* Operand descriptor byte */ + memS instr; /* Description of binary to be output */ + char *outP; /* Where the binary was output to */ + expressionS expr; /* Parsed expression */ + /* ->description of deferred address fixup */ + fixS *fixP; + +#ifdef OBJ_COFF + /* COFF support isn't in place yet for callx relaxing. */ + callx = 0; +#endif + + memset (&instr, '\0', sizeof (memS)); + instr.opcode = oP->opcode; + + /* Process operands. */ + for (i = 1; i <= oP->num_ops; i++) + { + opdesc = oP->operand[i - 1]; + + if (MEMOP (opdesc)) + { + parse_memop (&instr, args[i], oP->format); + } + else + { + parse_regop (®op, args[i], opdesc); + instr.opcode |= regop.n << 19; + } + } + + /* Parse the displacement; this must be done before emitting the + opcode, in case it is an expression using `.'. */ + parse_expr (instr.e, &expr); + + /* Output opcode */ + outP = emit (instr.opcode); + + if (instr.disp == 0) + { + return; + } + + /* Process the displacement */ + switch (expr.X_op) + { + case O_illegal: + as_bad (_("expression syntax error")); + break; + + case O_constant: + if (instr.disp == 32) + { + (void) emit (offs (expr)); /* Output displacement */ + } + else + { + /* 12-bit displacement */ + if (offs (expr) & ~0xfff) + { + /* Won't fit in 12 bits: convert already-output + * instruction to MEMB format, output + * displacement. + */ + mema_to_memb (outP); + (void) emit (offs (expr)); + } + else + { + /* WILL fit in 12 bits: OR into opcode and + * overwrite the binary we already put out + */ + instr.opcode |= offs (expr); + md_number_to_chars (outP, instr.opcode, 4); + } + } + break; + + default: + if (instr.disp == 12) + { + /* Displacement is dependent on a symbol, whose value + * may change at link time. We HAVE to reserve 32 bits. + * Convert already-output opcode to MEMB format. + */ + mema_to_memb (outP); + } + + /* Output 0 displacement and set up address fixup for when + * this symbol's value becomes known. + */ + outP = emit ((long) 0); + fixP = fix_new_exp (frag_now, + outP - frag_now->fr_literal, + 4, + &expr, + 0, + NO_RELOC); + /* Steve's linker relaxing hack. Mark this 32-bit relocation as + being in the instruction stream, specifically as part of a callx + instruction. */ + fixP->fx_bsr = callx; + break; + } +} /* memfmt() */ + + +/***************************************************************************** + mema_to_memb: convert a MEMA-format opcode to a MEMB-format opcode. + + There are 2 possible MEMA formats: + - displacement only + - displacement + abase + + They are distinguished by the setting of the MEMA_ABASE bit. + + *************************************************************************** */ +static void +mema_to_memb (opcodeP) + char *opcodeP; /* Where to find the opcode, in target byte order */ +{ + long opcode; /* Opcode in host byte order */ + long mode; /* Mode bits for MEMB instruction */ + + opcode = md_chars_to_number (opcodeP, 4); + know (!(opcode & MEMB_BIT)); + + mode = MEMB_BIT | D_BIT; + if (opcode & MEMA_ABASE) + { + mode |= A_BIT; + } + + opcode &= 0xffffc000; /* Clear MEMA offset and mode bits */ + opcode |= mode; /* Set MEMB mode bits */ + + md_number_to_chars (opcodeP, opcode, 4); +} /* mema_to_memb() */ + + +/***************************************************************************** + parse_expr: parse an expression + + Use base assembler's expression parser to parse an expression. + It, unfortunately, runs off a global which we have to save/restore + in order to make it work for us. + + An empty expression string is treated as an absolute 0. + + Sets O_illegal regardless of expression evaluation if entire input + string is not consumed in the evaluation -- tolerate no dangling junk! + + *************************************************************************** */ +static void +parse_expr (textP, expP) + char *textP; /* Text of expression to be parsed */ + expressionS *expP; /* Where to put the results of parsing */ +{ + char *save_in; /* Save global here */ + symbolS *symP; + + know (textP); + + if (*textP == '\0') + { + /* Treat empty string as absolute 0 */ + expP->X_add_symbol = expP->X_op_symbol = NULL; + expP->X_add_number = 0; + expP->X_op = O_constant; + } + else + { + save_in = input_line_pointer; /* Save global */ + input_line_pointer = textP; /* Make parser work for us */ + + (void) expression (expP); + if ((size_t) (input_line_pointer - textP) != strlen (textP)) + { + /* Did not consume all of the input */ + expP->X_op = O_illegal; + } + symP = expP->X_add_symbol; + if (symP && (hash_find (reg_hash, S_GET_NAME (symP)))) + { + /* Register name in an expression */ + /* FIXME: this isn't much of a check any more. */ + expP->X_op = O_illegal; + } + + input_line_pointer = save_in; /* Restore global */ + } +} + + +/***************************************************************************** + parse_ldcont: + Parse and replace a 'ldconst' pseudo-instruction with an appropriate + i80960 instruction. + + Assumes the input consists of: + arg[0] opcode mnemonic ('ldconst') + arg[1] first operand (constant) + arg[2] name of register to be loaded + + Replaces opcode and/or operands as appropriate. + + Returns the new number of arguments, or -1 on failure. + + *************************************************************************** */ +static +int +parse_ldconst (arg) + char *arg[]; /* See above */ +{ + int n; /* Constant to be loaded */ + int shift; /* Shift count for "shlo" instruction */ + static char buf[5]; /* Literal for first operand */ + static char buf2[5]; /* Literal for second operand */ + expressionS e; /* Parsed expression */ + + + arg[3] = NULL; /* So we can tell at the end if it got used or not */ + + parse_expr (arg[1], &e); + switch (e.X_op) + { + default: + /* We're dependent on one or more symbols -- use "lda" */ + arg[0] = "lda"; + break; + + case O_constant: + /* Try the following mappings: + * ldconst 0,<reg> ->mov 0,<reg> + * ldconst 31,<reg> ->mov 31,<reg> + * ldconst 32,<reg> ->addo 1,31,<reg> + * ldconst 62,<reg> ->addo 31,31,<reg> + * ldconst 64,<reg> ->shlo 8,3,<reg> + * ldconst -1,<reg> ->subo 1,0,<reg> + * ldconst -31,<reg>->subo 31,0,<reg> + * + * anthing else becomes: + * lda xxx,<reg> + */ + n = offs (e); + if ((0 <= n) && (n <= 31)) + { + arg[0] = "mov"; + + } + else if ((-31 <= n) && (n <= -1)) + { + arg[0] = "subo"; + arg[3] = arg[2]; + sprintf (buf, "%d", -n); + arg[1] = buf; + arg[2] = "0"; + + } + else if ((32 <= n) && (n <= 62)) + { + arg[0] = "addo"; + arg[3] = arg[2]; + arg[1] = "31"; + sprintf (buf, "%d", n - 31); + arg[2] = buf; + + } + else if ((shift = shift_ok (n)) != 0) + { + arg[0] = "shlo"; + arg[3] = arg[2]; + sprintf (buf, "%d", shift); + arg[1] = buf; + sprintf (buf2, "%d", n >> shift); + arg[2] = buf2; + + } + else + { + arg[0] = "lda"; + } + break; + + case O_illegal: + as_bad (_("invalid constant")); + return -1; + break; + } + return (arg[3] == 0) ? 2 : 3; +} + +/***************************************************************************** + parse_memop: parse a memory operand + + This routine is based on the observation that the 4 mode bits of the + MEMB format, taken individually, have fairly consistent meaning: + + M3 (bit 13): 1 if displacement is present (D_BIT) + M2 (bit 12): 1 for MEMB instructions (MEMB_BIT) + M1 (bit 11): 1 if index is present (I_BIT) + M0 (bit 10): 1 if abase is present (A_BIT) + + So we parse the memory operand and set bits in the mode as we find + things. Then at the end, if we go to MEMB format, we need only set + the MEMB bit (M2) and our mode is built for us. + + Unfortunately, I said "fairly consistent". The exceptions: + + DBIA + 0100 Would seem illegal, but means "abase-only". + + 0101 Would seem to mean "abase-only" -- it means IP-relative. + Must be converted to 0100. + + 0110 Would seem to mean "index-only", but is reserved. + We turn on the D bit and provide a 0 displacement. + + The other thing to observe is that we parse from the right, peeling + things * off as we go: first any index spec, then any abase, then + the displacement. + + *************************************************************************** */ +static +void +parse_memop (memP, argP, optype) + memS *memP; /* Where to put the results */ + char *argP; /* Text of the operand to be parsed */ + int optype; /* MEM1, MEM2, MEM4, MEM8, MEM12, or MEM16 */ +{ + char *indexP; /* Pointer to index specification with "[]" removed */ + char *p; /* Temp char pointer */ + char iprel_flag; /* True if this is an IP-relative operand */ + int regnum; /* Register number */ + /* Scale factor: 1,2,4,8, or 16. Later converted to internal format + (0,1,2,3,4 respectively). */ + int scale; + int mode; /* MEMB mode bits */ + int *intP; /* Pointer to register number */ + + /* The following table contains the default scale factors for each + type of memory instruction. It is accessed using (optype-MEM1) + as an index -- thus it assumes the 'optype' constants are + assigned consecutive values, in the order they appear in this + table. */ + static const int def_scale[] = + { + 1, /* MEM1 */ + 2, /* MEM2 */ + 4, /* MEM4 */ + 8, /* MEM8 */ + -1, /* MEM12 -- no valid default */ + 16 /* MEM16 */ + }; + + + iprel_flag = mode = 0; + + /* Any index present? */ + indexP = get_ispec (argP); + if (indexP) + { + p = strchr (indexP, '*'); + if (p == NULL) + { + /* No explicit scale -- use default for this instruction + type and assembler mode. */ + if (flag_mri) + scale = 1; + else + /* GNU960 compatibility */ + scale = def_scale[optype - MEM1]; + } + else + { + *p++ = '\0'; /* Eliminate '*' */ + + /* Now indexP->a '\0'-terminated register name, + * and p->a scale factor. + */ + + if (!strcmp (p, "16")) + { + scale = 16; + } + else if (strchr ("1248", *p) && (p[1] == '\0')) + { + scale = *p - '0'; + } + else + { + scale = -1; + } + } + + regnum = get_regnum (indexP); /* Get index reg. # */ + if (!IS_RG_REG (regnum)) + { + as_bad (_("invalid index register")); + return; + } + + /* Convert scale to its binary encoding */ + switch (scale) + { + case 1: + scale = 0 << 7; + break; + case 2: + scale = 1 << 7; + break; + case 4: + scale = 2 << 7; + break; + case 8: + scale = 3 << 7; + break; + case 16: + scale = 4 << 7; + break; + default: + as_bad (_("invalid scale factor")); + return; + }; + + memP->opcode |= scale | regnum; /* Set index bits in opcode */ + mode |= I_BIT; /* Found a valid index spec */ + } + + /* Any abase (Register Indirect) specification present? */ + if ((p = strrchr (argP, '(')) != NULL) + { + /* "(" is there -- does it start a legal abase spec? If not, it + could be part of a displacement expression. */ + intP = (int *) hash_find (areg_hash, p); + if (intP != NULL) + { + /* Got an abase here */ + regnum = *intP; + *p = '\0'; /* discard register spec */ + if (regnum == IPREL) + { + /* We have to specialcase ip-rel mode */ + iprel_flag = 1; + } + else + { + memP->opcode |= regnum << 14; + mode |= A_BIT; + } + } + } + + /* Any expression present? */ + memP->e = argP; + if (*argP != '\0') + { + mode |= D_BIT; + } + + /* Special-case ip-relative addressing */ + if (iprel_flag) + { + if (mode & I_BIT) + { + syntax (); + } + else + { + memP->opcode |= 5 << 10; /* IP-relative mode */ + memP->disp = 32; + } + return; + } + + /* Handle all other modes */ + switch (mode) + { + case D_BIT | A_BIT: + /* Go with MEMA instruction format for now (grow to MEMB later + if 12 bits is not enough for the displacement). MEMA format + has a single mode bit: set it to indicate that abase is + present. */ + memP->opcode |= MEMA_ABASE; + memP->disp = 12; + break; + + case D_BIT: + /* Go with MEMA instruction format for now (grow to MEMB later + if 12 bits is not enough for the displacement). */ + memP->disp = 12; + break; + + case A_BIT: + /* For some reason, the bit string for this mode is not + consistent: it should be 0 (exclusive of the MEMB bit), so we + set it "by hand" here. */ + memP->opcode |= MEMB_BIT; + break; + + case A_BIT | I_BIT: + /* set MEMB bit in mode, and OR in mode bits */ + memP->opcode |= mode | MEMB_BIT; + break; + + case I_BIT: + /* Treat missing displacement as displacement of 0. */ + mode |= D_BIT; + /* Fall into next case. */ + case D_BIT | A_BIT | I_BIT: + case D_BIT | I_BIT: + /* set MEMB bit in mode, and OR in mode bits */ + memP->opcode |= mode | MEMB_BIT; + memP->disp = 32; + break; + + default: + syntax (); + break; + } +} + +/***************************************************************************** + parse_po: parse machine-dependent pseudo-op + + This is a top-level routine for machine-dependent pseudo-ops. It slurps + up the rest of the input line, breaks out the individual arguments, + and dispatches them to the correct handler. + *************************************************************************** */ +static +void +parse_po (po_num) + int po_num; /* Pseudo-op number: currently S_LEAFPROC or S_SYSPROC */ +{ + /* Pointers operands, with no embedded whitespace. + arg[0] unused, arg[1-3]->operands */ + char *args[4]; + int n_ops; /* Number of operands */ + char *p; /* Pointer to beginning of unparsed argument string */ + char eol; /* Character that indicated end of line */ + + extern char is_end_of_line[]; + + /* Advance input pointer to end of line. */ + p = input_line_pointer; + while (!is_end_of_line[(unsigned char) *input_line_pointer]) + { + input_line_pointer++; + } + eol = *input_line_pointer; /* Save end-of-line char */ + *input_line_pointer = '\0'; /* Terminate argument list */ + + /* Parse out operands */ + n_ops = get_args (p, args); + if (n_ops == -1) + { + return; + } + + /* Dispatch to correct handler */ + switch (po_num) + { + case S_SYSPROC: + s_sysproc (n_ops, args); + break; + case S_LEAFPROC: + s_leafproc (n_ops, args); + break; + default: + BAD_CASE (po_num); + break; + } + + /* Restore eol, so line numbers get updated correctly. Base + assembler assumes we leave input pointer pointing at char + following the eol. */ + *input_line_pointer++ = eol; +} + +/***************************************************************************** + parse_regop: parse a register operand. + + In case of illegal operand, issue a message and return some valid + information so instruction processing can continue. + *************************************************************************** */ +static +void +parse_regop (regopP, optext, opdesc) + struct regop *regopP; /* Where to put description of register operand */ + char *optext; /* Text of operand */ + char opdesc; /* Descriptor byte: what's legal for this operand */ +{ + int n; /* Register number */ + expressionS e; /* Parsed expression */ + + /* See if operand is a register */ + n = get_regnum (optext); + if (n >= 0) + { + if (IS_RG_REG (n)) + { + /* global or local register */ + if (!REG_ALIGN (opdesc, n)) + { + as_bad (_("unaligned register")); + } + regopP->n = n; + regopP->mode = 0; + regopP->special = 0; + return; + } + else if (IS_FP_REG (n) && FP_OK (opdesc)) + { + /* Floating point register, and it's allowed */ + regopP->n = n - FP0; + regopP->mode = 1; + regopP->special = 0; + return; + } + else if (IS_SF_REG (n) && SFR_OK (opdesc)) + { + /* Special-function register, and it's allowed */ + regopP->n = n - SF0; + regopP->mode = 0; + regopP->special = 1; + if (!targ_has_sfr (regopP->n)) + { + as_bad (_("no such sfr in this architecture")); + } + return; + } + } + else if (LIT_OK (opdesc)) + { + /* How about a literal? */ + regopP->mode = 1; + regopP->special = 0; + if (FP_OK (opdesc)) + { /* floating point literal acceptable */ + /* Skip over 0f, 0d, or 0e prefix */ + if ((optext[0] == '0') + && (optext[1] >= 'd') + && (optext[1] <= 'f')) + { + optext += 2; + } + + if (!strcmp (optext, "0.0") || !strcmp (optext, "0")) + { + regopP->n = 0x10; + return; + } + if (!strcmp (optext, "1.0") || !strcmp (optext, "1")) + { + regopP->n = 0x16; + return; + } + + } + else + { /* fixed point literal acceptable */ + parse_expr (optext, &e); + if (e.X_op != O_constant + || (offs (e) < 0) || (offs (e) > 31)) + { + as_bad (_("illegal literal")); + offs (e) = 0; + } + regopP->n = offs (e); + return; + } + } + + /* Nothing worked */ + syntax (); + regopP->mode = 0; /* Register r0 is always a good one */ + regopP->n = 0; + regopP->special = 0; +} /* parse_regop() */ + +/***************************************************************************** + reg_fmt: generate a REG-format instruction + + *************************************************************************** */ +static void +reg_fmt (args, oP) + char *args[]; /* args[0]->opcode mnemonic, args[1-3]->operands */ + struct i960_opcode *oP; /* Pointer to description of instruction */ +{ + long instr; /* Binary to be output */ + struct regop regop; /* Description of register operand */ + int n_ops; /* Number of operands */ + + + instr = oP->opcode; + n_ops = oP->num_ops; + + if (n_ops >= 1) + { + parse_regop (®op, args[1], oP->operand[0]); + + if ((n_ops == 1) && !(instr & M3)) + { + /* 1-operand instruction in which the dst field should + * be used (instead of src1). + */ + regop.n <<= 19; + if (regop.special) + { + regop.mode = regop.special; + } + regop.mode <<= 13; + regop.special = 0; + } + else + { + /* regop.n goes in bit 0, needs no shifting */ + regop.mode <<= 11; + regop.special <<= 5; + } + instr |= regop.n | regop.mode | regop.special; + } + + if (n_ops >= 2) + { + parse_regop (®op, args[2], oP->operand[1]); + + if ((n_ops == 2) && !(instr & M3)) + { + /* 2-operand instruction in which the dst field should + * be used instead of src2). + */ + regop.n <<= 19; + if (regop.special) + { + regop.mode = regop.special; + } + regop.mode <<= 13; + regop.special = 0; + } + else + { + regop.n <<= 14; + regop.mode <<= 12; + regop.special <<= 6; + } + instr |= regop.n | regop.mode | regop.special; + } + if (n_ops == 3) + { + parse_regop (®op, args[3], oP->operand[2]); + if (regop.special) + { + regop.mode = regop.special; + } + instr |= (regop.n <<= 19) | (regop.mode <<= 13); + } + emit (instr); +} + + +/***************************************************************************** + relax_cobr: + Replace cobr instruction in a code fragment with equivalent branch and + compare instructions, so it can reach beyond a 13-bit displacement. + Set up an address fix/relocation for the new branch instruction. + + *************************************************************************** */ + +/* This "conditional jump" table maps cobr instructions into + equivalent compare and branch opcodes. */ +static const +struct +{ + long compare; + long branch; +} + +coj[] = +{ /* COBR OPCODE: */ + { CHKBIT, BNO }, /* 0x30 - bbc */ + { CMPO, BG }, /* 0x31 - cmpobg */ + { CMPO, BE }, /* 0x32 - cmpobe */ + { CMPO, BGE }, /* 0x33 - cmpobge */ + { CMPO, BL }, /* 0x34 - cmpobl */ + { CMPO, BNE }, /* 0x35 - cmpobne */ + { CMPO, BLE }, /* 0x36 - cmpoble */ + { CHKBIT, BO }, /* 0x37 - bbs */ + { CMPI, BNO }, /* 0x38 - cmpibno */ + { CMPI, BG }, /* 0x39 - cmpibg */ + { CMPI, BE }, /* 0x3a - cmpibe */ + { CMPI, BGE }, /* 0x3b - cmpibge */ + { CMPI, BL }, /* 0x3c - cmpibl */ + { CMPI, BNE }, /* 0x3d - cmpibne */ + { CMPI, BLE }, /* 0x3e - cmpible */ + { CMPI, BO }, /* 0x3f - cmpibo */ +}; + +static +void +relax_cobr (fragP) + register fragS *fragP; /* fragP->fr_opcode is assumed to point to + * the cobr instruction, which comes at the + * end of the code fragment. + */ +{ + int opcode, src1, src2, m1, s2; + /* Bit fields from cobr instruction */ + long bp_bits; /* Branch prediction bits from cobr instruction */ + long instr; /* A single i960 instruction */ + /* ->instruction to be replaced */ + char *iP; + fixS *fixP; /* Relocation that can be done at assembly time */ + + /* PICK UP & PARSE COBR INSTRUCTION */ + iP = fragP->fr_opcode; + instr = md_chars_to_number (iP, 4); + opcode = ((instr >> 24) & 0xff) - 0x30; /* "-0x30" for table index */ + src1 = (instr >> 19) & 0x1f; + m1 = (instr >> 13) & 1; + s2 = instr & 1; + src2 = (instr >> 14) & 0x1f; + bp_bits = instr & BP_MASK; + + /* GENERATE AND OUTPUT COMPARE INSTRUCTION */ + instr = coj[opcode].compare + | src1 | (m1 << 11) | (s2 << 6) | (src2 << 14); + md_number_to_chars (iP, instr, 4); + + /* OUTPUT BRANCH INSTRUCTION */ + md_number_to_chars (iP + 4, coj[opcode].branch | bp_bits, 4); + + /* SET UP ADDRESS FIXUP/RELOCATION */ + fixP = fix_new (fragP, + iP + 4 - fragP->fr_literal, + 4, + fragP->fr_symbol, + fragP->fr_offset, + 1, + NO_RELOC); + + fixP->fx_bit_fixP = (bit_fixS *) 24; /* Store size of bit field */ + + fragP->fr_fix += 4; + frag_wane (fragP); +} + + +/***************************************************************************** + reloc_callj: Relocate a 'callj' instruction + + This is a "non-(GNU)-standard" machine-dependent hook. The base + assembler calls it when it decides it can relocate an address at + assembly time instead of emitting a relocation directive. + + Check to see if the relocation involves a 'callj' instruction to a: + sysproc: Replace the default 'call' instruction with a 'calls' + leafproc: Replace the default 'call' instruction with a 'bal'. + other proc: Do nothing. + + See b.out.h for details on the 'n_other' field in a symbol structure. + + IMPORTANT!: + Assumes the caller has already figured out, in the case of a leafproc, + to use the 'bal' entry point, and has substituted that symbol into the + passed fixup structure. + + *************************************************************************** */ +void +reloc_callj (fixP) + /* Relocation that can be done at assembly time */ + fixS *fixP; +{ + /* Points to the binary for the instruction being relocated. */ + char *where; + + if (!fixP->fx_tcbit) + { + /* This wasn't a callj instruction in the first place */ + return; + } + + where = fixP->fx_frag->fr_literal + fixP->fx_where; + + if (TC_S_IS_SYSPROC (fixP->fx_addsy)) + { + /* Symbol is a .sysproc: replace 'call' with 'calls'. System + procedure number is (other-1). */ + md_number_to_chars (where, CALLS | TC_S_GET_SYSPROC (fixP->fx_addsy), 4); + + /* Nothing else needs to be done for this instruction. Make + sure 'md_number_to_field()' will perform a no-op. */ + fixP->fx_bit_fixP = (bit_fixS *) 1; + + } + else if (TC_S_IS_CALLNAME (fixP->fx_addsy)) + { + /* Should not happen: see block comment above */ + as_fatal (_("Trying to 'bal' to %s"), S_GET_NAME (fixP->fx_addsy)); + } + else if (TC_S_IS_BALNAME (fixP->fx_addsy)) + { + /* Replace 'call' with 'bal'; both instructions have the same + format, so calling code should complete relocation as if + nothing happened here. */ + md_number_to_chars (where, BAL, 4); + } + else if (TC_S_IS_BADPROC (fixP->fx_addsy)) + { + as_bad (_("Looks like a proc, but can't tell what kind.\n")); + } /* switch on proc type */ + + /* else Symbol is neither a sysproc nor a leafproc */ +} + + +/***************************************************************************** + s_leafproc: process .leafproc pseudo-op + + .leafproc takes two arguments, the second one is optional: + arg[1]: name of 'call' entry point to leaf procedure + arg[2]: name of 'bal' entry point to leaf procedure + + If the two arguments are identical, or if the second one is missing, + the first argument is taken to be the 'bal' entry point. + + If there are 2 distinct arguments, we must make sure that the 'bal' + entry point immediately follows the 'call' entry point in the linked + list of symbols. + + *************************************************************************** */ +static void +s_leafproc (n_ops, args) + int n_ops; /* Number of operands */ + char *args[]; /* args[1]->1st operand, args[2]->2nd operand */ +{ + symbolS *callP; /* Pointer to leafproc 'call' entry point symbol */ + symbolS *balP; /* Pointer to leafproc 'bal' entry point symbol */ + + if ((n_ops != 1) && (n_ops != 2)) + { + as_bad (_("should have 1 or 2 operands")); + return; + } /* Check number of arguments */ + + /* Find or create symbol for 'call' entry point. */ + callP = symbol_find_or_make (args[1]); + + if (TC_S_IS_CALLNAME (callP)) + { + as_warn (_("Redefining leafproc %s"), S_GET_NAME (callP)); + } /* is leafproc */ + + /* If that was the only argument, use it as the 'bal' entry point. + * Otherwise, mark it as the 'call' entry point and find or create + * another symbol for the 'bal' entry point. + */ + if ((n_ops == 1) || !strcmp (args[1], args[2])) + { + TC_S_FORCE_TO_BALNAME (callP); + + } + else + { + TC_S_FORCE_TO_CALLNAME (callP); + + balP = symbol_find_or_make (args[2]); + if (TC_S_IS_CALLNAME (balP)) + { + as_warn (_("Redefining leafproc %s"), S_GET_NAME (balP)); + } + TC_S_FORCE_TO_BALNAME (balP); + + tc_set_bal_of_call (callP, balP); + } /* if only one arg, or the args are the same */ +} + + +/* + s_sysproc: process .sysproc pseudo-op + + .sysproc takes two arguments: + arg[1]: name of entry point to system procedure + arg[2]: 'entry_num' (index) of system procedure in the range + [0,31] inclusive. + + For [ab].out, we store the 'entrynum' in the 'n_other' field of + the symbol. Since that entry is normally 0, we bias 'entrynum' + by adding 1 to it. It must be unbiased before it is used. */ +static void +s_sysproc (n_ops, args) + int n_ops; /* Number of operands */ + char *args[]; /* args[1]->1st operand, args[2]->2nd operand */ +{ + expressionS exp; + symbolS *symP; + + if (n_ops != 2) + { + as_bad (_("should have two operands")); + return; + } /* bad arg count */ + + /* Parse "entry_num" argument and check it for validity. */ + parse_expr (args[2], &exp); + if (exp.X_op != O_constant + || (offs (exp) < 0) + || (offs (exp) > 31)) + { + as_bad (_("'entry_num' must be absolute number in [0,31]")); + return; + } + + /* Find/make symbol and stick entry number (biased by +1) into it */ + symP = symbol_find_or_make (args[1]); + + if (TC_S_IS_SYSPROC (symP)) + { + as_warn (_("Redefining entrynum for sysproc %s"), S_GET_NAME (symP)); + } /* redefining */ + + TC_S_SET_SYSPROC (symP, offs (exp)); /* encode entry number */ + TC_S_FORCE_TO_SYSPROC (symP); +} + + +/***************************************************************************** + shift_ok: + Determine if a "shlo" instruction can be used to implement a "ldconst". + This means that some number X < 32 can be shifted left to produce the + constant of interest. + + Return the shift count, or 0 if we can't do it. + Caller calculates X by shifting original constant right 'shift' places. + + *************************************************************************** */ +static +int +shift_ok (n) + int n; /* The constant of interest */ +{ + int shift; /* The shift count */ + + if (n <= 0) + { + /* Can't do it for negative numbers */ + return 0; + } + + /* Shift 'n' right until a 1 is about to be lost */ + for (shift = 0; (n & 1) == 0; shift++) + { + n >>= 1; + } + + if (n >= 32) + { + return 0; + } + return shift; +} + + +/* syntax: issue syntax error */ + +static void +syntax () +{ + as_bad (_("syntax error")); +} /* syntax() */ + + +/* targ_has_sfr: + + Return TRUE iff the target architecture supports the specified + special-function register (sfr). */ + +static +int +targ_has_sfr (n) + int n; /* Number (0-31) of sfr */ +{ + switch (architecture) + { + case ARCH_KA: + case ARCH_KB: + case ARCH_MC: + case ARCH_JX: + return 0; + case ARCH_HX: + return ((0 <= n) && (n <= 4)); + case ARCH_CA: + default: + return ((0 <= n) && (n <= 2)); + } +} + + +/* targ_has_iclass: + + Return TRUE iff the target architecture supports the indicated + class of instructions. */ +static +int +targ_has_iclass (ic) + /* Instruction class; one of: + I_BASE, I_CX, I_DEC, I_KX, I_FP, I_MIL, I_CASIM, I_CX2, I_HX, I_HX2 + */ + int ic; +{ + iclasses_seen |= ic; + switch (architecture) + { + case ARCH_KA: + return ic & (I_BASE | I_KX); + case ARCH_KB: + return ic & (I_BASE | I_KX | I_FP | I_DEC); + case ARCH_MC: + return ic & (I_BASE | I_KX | I_FP | I_DEC | I_MIL); + case ARCH_CA: + return ic & (I_BASE | I_CX | I_CX2 | I_CASIM); + case ARCH_JX: + return ic & (I_BASE | I_CX2 | I_JX); + case ARCH_HX: + return ic & (I_BASE | I_CX2 | I_JX | I_HX); + default: + if ((iclasses_seen & (I_KX | I_FP | I_DEC | I_MIL)) + && (iclasses_seen & (I_CX | I_CX2))) + { + as_warn (_("architecture of opcode conflicts with that of earlier instruction(s)")); + iclasses_seen &= ~ic; + } + return 1; + } +} + +/* Handle the MRI .endian pseudo-op. */ + +static void +s_endian (ignore) + int ignore; +{ + char *name; + char c; + + name = input_line_pointer; + c = get_symbol_end (); + if (strcasecmp (name, "little") == 0) + ; + else if (strcasecmp (name, "big") == 0) + as_bad (_("big endian mode is not supported")); + else + as_warn (_("ignoring unrecognized .endian type `%s'"), name); + + *input_line_pointer = c; + + demand_empty_rest_of_line (); +} + +/* We have no need to default values of symbols. */ + +/* ARGSUSED */ +symbolS * +md_undefined_symbol (name) + char *name; +{ + return 0; +} + +/* Exactly what point is a PC-relative offset relative TO? + On the i960, they're relative to the address of the instruction, + which we have set up as the address of the fixup too. */ +long +md_pcrel_from (fixP) + fixS *fixP; +{ + return fixP->fx_where + fixP->fx_frag->fr_address; +} + +void +md_apply_fix (fixP, val) + fixS *fixP; + long val; +{ + char *place = fixP->fx_where + fixP->fx_frag->fr_literal; + + if (!fixP->fx_bit_fixP) + { + /* For callx, we always want to write out zero, and emit a + symbolic relocation. */ + if (fixP->fx_bsr) + val = 0; + + fixP->fx_addnumber = val; + md_number_to_imm (place, val, fixP->fx_size, fixP); + } + else + md_number_to_field (place, val, fixP->fx_bit_fixP); +} + +#if defined(OBJ_AOUT) | defined(OBJ_BOUT) +void +tc_bout_fix_to_chars (where, fixP, segment_address_in_file) + char *where; + fixS *fixP; + relax_addressT segment_address_in_file; +{ + static const unsigned char nbytes_r_length[] = {42, 0, 1, 42, 2}; + struct relocation_info ri; + symbolS *symbolP; + + memset ((char *) &ri, '\0', sizeof (ri)); + symbolP = fixP->fx_addsy; + know (symbolP != 0 || fixP->fx_r_type != NO_RELOC); + ri.r_bsr = fixP->fx_bsr; /*SAC LD RELAX HACK */ + /* These two 'cuz of NS32K */ + ri.r_callj = fixP->fx_tcbit; + if (fixP->fx_bit_fixP) + ri.r_length = 2; + else + ri.r_length = nbytes_r_length[fixP->fx_size]; + ri.r_pcrel = fixP->fx_pcrel; + ri.r_address = fixP->fx_frag->fr_address + fixP->fx_where - segment_address_in_file; + + if (fixP->fx_r_type != NO_RELOC) + { + switch (fixP->fx_r_type) + { + case rs_align: + ri.r_index = -2; + ri.r_pcrel = 1; + ri.r_length = fixP->fx_size - 1; + break; + case rs_org: + ri.r_index = -2; + ri.r_pcrel = 0; + break; + case rs_fill: + ri.r_index = -1; + break; + default: + abort (); + } + ri.r_extern = 0; + } + else if (linkrelax || !S_IS_DEFINED (symbolP) || fixP->fx_bsr) + { + ri.r_extern = 1; + ri.r_index = symbolP->sy_number; + } + else + { + ri.r_extern = 0; + ri.r_index = S_GET_TYPE (symbolP); + } + + /* Output the relocation information in machine-dependent form. */ + md_ri_to_chars (where, &ri); +} + +#endif /* OBJ_AOUT or OBJ_BOUT */ + +#if defined (OBJ_COFF) && defined (BFD) +short +tc_coff_fix2rtype (fixP) + fixS *fixP; +{ + if (fixP->fx_bsr) + abort (); + + if (fixP->fx_pcrel == 0 && fixP->fx_size == 4) + return R_RELLONG; + + if (fixP->fx_pcrel != 0 && fixP->fx_size == 4) + return R_IPRMED; + + abort (); + return 0; +} + +int +tc_coff_sizemachdep (frag) + fragS *frag; +{ + if (frag->fr_next) + return frag->fr_next->fr_address - frag->fr_address; + else + return 0; +} +#endif + +/* Align an address by rounding it up to the specified boundary. */ +valueT +md_section_align (seg, addr) + segT seg; + valueT addr; /* Address to be rounded up */ +{ + return ((addr + (1 << section_alignment[(int) seg]) - 1) & (-1 << section_alignment[(int) seg])); +} /* md_section_align() */ + +extern int coff_flags; + +#ifdef OBJ_COFF +void +tc_headers_hook (headers) + object_headers *headers; +{ + switch (architecture) + { + case ARCH_KA: + coff_flags |= F_I960KA; + break; + + case ARCH_KB: + coff_flags |= F_I960KB; + break; + + case ARCH_MC: + coff_flags |= F_I960MC; + break; + + case ARCH_CA: + coff_flags |= F_I960CA; + break; + + case ARCH_JX: + coff_flags |= F_I960JX; + break; + + case ARCH_HX: + coff_flags |= F_I960HX; + break; + + default: + if (iclasses_seen == I_BASE) + coff_flags |= F_I960CORE; + else if (iclasses_seen & I_CX) + coff_flags |= F_I960CA; + else if (iclasses_seen & I_HX) + coff_flags |= F_I960HX; + else if (iclasses_seen & I_JX) + coff_flags |= F_I960JX; + else if (iclasses_seen & I_CX2) + coff_flags |= F_I960CA; + else if (iclasses_seen & I_MIL) + coff_flags |= F_I960MC; + else if (iclasses_seen & (I_DEC | I_FP)) + coff_flags |= F_I960KB; + else + coff_flags |= F_I960KA; + break; + } + + if (flag_readonly_data_in_text) + { + headers->filehdr.f_magic = I960RWMAGIC; + headers->aouthdr.magic = OMAGIC; + } + else + { + headers->filehdr.f_magic = I960ROMAGIC; + headers->aouthdr.magic = NMAGIC; + } /* set magic numbers */ +} + +#endif /* OBJ_COFF */ + +/* Things going on here: + + For bout, We need to assure a couple of simplifying + assumptions about leafprocs for the linker: the leafproc + entry symbols will be defined in the same assembly in + which they're declared with the '.leafproc' directive; + and if a leafproc has both 'call' and 'bal' entry points + they are both global or both local. + + For coff, the call symbol has a second aux entry that + contains the bal entry point. The bal symbol becomes a + label. + + For coff representation, the call symbol has a second aux entry that + contains the bal entry point. The bal symbol becomes a label. */ + +void +tc_crawl_symbol_chain (headers) + object_headers *headers; +{ + symbolS *symbolP; + + for (symbolP = symbol_rootP; symbolP; symbolP = symbol_next (symbolP)) + { +#ifdef OBJ_COFF + if (TC_S_IS_SYSPROC (symbolP)) + { + /* second aux entry already contains the sysproc number */ + S_SET_NUMBER_AUXILIARY (symbolP, 2); + S_SET_STORAGE_CLASS (symbolP, C_SCALL); + S_SET_DATA_TYPE (symbolP, S_GET_DATA_TYPE (symbolP) | (DT_FCN << N_BTSHFT)); + continue; + } /* rewrite sysproc */ +#endif /* OBJ_COFF */ + + if (!TC_S_IS_BALNAME (symbolP) && !TC_S_IS_CALLNAME (symbolP)) + { + continue; + } /* Not a leafproc symbol */ + + if (!S_IS_DEFINED (symbolP)) + { + as_bad (_("leafproc symbol '%s' undefined"), S_GET_NAME (symbolP)); + } /* undefined leaf */ + + if (TC_S_IS_CALLNAME (symbolP)) + { + symbolS *balP = tc_get_bal_of_call (symbolP); + if (S_IS_EXTERNAL (symbolP) != S_IS_EXTERNAL (balP)) + { + S_SET_EXTERNAL (symbolP); + S_SET_EXTERNAL (balP); + as_warn (_("Warning: making leafproc entries %s and %s both global\n"), + S_GET_NAME (symbolP), S_GET_NAME (balP)); + } /* externality mismatch */ + } /* if callname */ + } /* walk the symbol chain */ +} + +/* For aout or bout, the bal immediately follows the call. + + For coff, we cheat and store a pointer to the bal symbol in the + second aux entry of the call. */ + +#undef OBJ_ABOUT +#ifdef OBJ_AOUT +#define OBJ_ABOUT +#endif +#ifdef OBJ_BOUT +#define OBJ_ABOUT +#endif + +void +tc_set_bal_of_call (callP, balP) + symbolS *callP; + symbolS *balP; +{ + know (TC_S_IS_CALLNAME (callP)); + know (TC_S_IS_BALNAME (balP)); + +#ifdef OBJ_COFF + + callP->sy_tc = balP; + S_SET_NUMBER_AUXILIARY (callP, 2); + +#else /* ! OBJ_COFF */ +#ifdef OBJ_ABOUT + + /* If the 'bal' entry doesn't immediately follow the 'call' + * symbol, unlink it from the symbol list and re-insert it. + */ + if (symbol_next (callP) != balP) + { + symbol_remove (balP, &symbol_rootP, &symbol_lastP); + symbol_append (balP, callP, &symbol_rootP, &symbol_lastP); + } /* if not in order */ + +#else /* ! OBJ_ABOUT */ + (as yet unwritten.); +#endif /* ! OBJ_ABOUT */ +#endif /* ! OBJ_COFF */ +} + +symbolS * +tc_get_bal_of_call (callP) + symbolS *callP; +{ + symbolS *retval; + + know (TC_S_IS_CALLNAME (callP)); + +#ifdef OBJ_COFF + retval = callP->sy_tc; +#else +#ifdef OBJ_ABOUT + retval = symbol_next (callP); +#else + (as yet unwritten.); +#endif /* ! OBJ_ABOUT */ +#endif /* ! OBJ_COFF */ + + know (TC_S_IS_BALNAME (retval)); + return retval; +} /* _tc_get_bal_of_call() */ + +void +tc_coff_symbol_emit_hook (symbolP) + symbolS *symbolP; +{ + if (TC_S_IS_CALLNAME (symbolP)) + { +#ifdef OBJ_COFF + symbolS *balP = tc_get_bal_of_call (symbolP); + +#if 0 + /* second aux entry contains the bal entry point */ + S_SET_NUMBER_AUXILIARY (symbolP, 2); +#endif + symbolP->sy_symbol.ost_auxent[1].x_bal.x_balntry = S_GET_VALUE (balP); + if (S_GET_STORAGE_CLASS (symbolP) == C_EXT) + S_SET_STORAGE_CLASS (symbolP, C_LEAFEXT); + else + S_SET_STORAGE_CLASS (symbolP, C_LEAFSTAT); + S_SET_DATA_TYPE (symbolP, S_GET_DATA_TYPE (symbolP) | (DT_FCN << N_BTSHFT)); + /* fix up the bal symbol */ + S_SET_STORAGE_CLASS (balP, C_LABEL); +#endif /* OBJ_COFF */ + } /* only on calls */ +} + +void +i960_handle_align (fragp) + fragS *fragp; +{ + if (!linkrelax) + return; + +#ifndef OBJ_BOUT + + as_bad (_("option --link-relax is only supported in b.out format")); + linkrelax = 0; + return; + +#else + + /* The text section "ends" with another alignment reloc, to which we + aren't adding padding. */ + if (fragp->fr_next == text_last_frag + || fragp->fr_next == data_last_frag) + return; + + /* alignment directive */ + fix_new (fragp, fragp->fr_fix, fragp->fr_offset, 0, 0, 0, + (int) fragp->fr_type); +#endif /* OBJ_BOUT */ +} + +int +i960_validate_fix (fixP, this_segment_type, add_symbolPP) + fixS *fixP; + segT this_segment_type; + symbolS **add_symbolPP; +{ +#define add_symbolP (*add_symbolPP) + if (fixP->fx_tcbit && TC_S_IS_CALLNAME (add_symbolP)) + { + /* Relocation should be done via the associated 'bal' + entry point symbol. */ + + if (!TC_S_IS_BALNAME (tc_get_bal_of_call (add_symbolP))) + { + as_bad (_("No 'bal' entry point for leafproc %s"), + S_GET_NAME (add_symbolP)); + return 1; + } + fixP->fx_addsy = add_symbolP = tc_get_bal_of_call (add_symbolP); + } +#if 0 + /* Still have to work out other conditions for these tests. */ + { + if (fixP->fx_tcbit) + { + as_bad (_("callj to difference of two symbols")); + return 1; + } + reloc_callj (fixP); + if ((int) fixP->fx_bit_fixP == 13) + { + /* This is a COBR instruction. They have only a 13-bit + displacement and are only to be used for local branches: + flag as error, don't generate relocation. */ + as_bad (_("can't use COBR format with external label")); + fixP->fx_addsy = NULL; /* No relocations please. */ + return 1; + } + } +#endif +#undef add_symbolP + return 0; +} + +/* end of tc-i960.c */ |