aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--binutils/.Sanitize3
-rw-r--r--binutils/ChangeLog14
-rw-r--r--binutils/Makefile.am433
-rw-r--r--binutils/Makefile.in1279
-rw-r--r--binutils/acconfig.h6
-rw-r--r--binutils/acinclude.m41
-rw-r--r--binutils/aclocal.m4295
-rw-r--r--binutils/config.in61
-rwxr-xr-xbinutils/configure1199
-rw-r--r--binutils/configure.in92
-rw-r--r--binutils/stamp-h.in1
11 files changed, 2604 insertions, 780 deletions
diff --git a/binutils/.Sanitize b/binutils/.Sanitize
index c66a8ff..fef08a1 100644
--- a/binutils/.Sanitize
+++ b/binutils/.Sanitize
@@ -24,10 +24,12 @@ Do-first:
Things-to-keep:
ChangeLog
+Makefile.am
Makefile.in
NEWS
README
acconfig.h
+acinclude.m4
aclocal.m4
addr2line.1
addr2line.c
@@ -94,6 +96,7 @@ size.1
size.c
srconv.c
stabs.c
+stamp-h.in
strings.1
strings.c
strip.1
diff --git a/binutils/ChangeLog b/binutils/ChangeLog
index 2d28676..f616ed4 100644
--- a/binutils/ChangeLog
+++ b/binutils/ChangeLog
@@ -1,5 +1,19 @@
Thu Jul 31 11:51:35 1997 Ian Lance Taylor <ian@cygnus.com>
+ * Makefile.am: New file, based on old Makefile.in.
+ * acinclude.m4: New file, from old aclocal.m4.
+ * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL. Remove
+ shared library handling; now handled by libtool. Replace
+ AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AC_PROG_YACC,
+ AC_PROG_LEX, AC_DECL_YYTEST, AM_MAINTAINER_MODE, AM_CYGWIN32, and
+ AM_EXEEXT. Replace AC_PROG_INSTALL with AM_PROG_INSTALL. Remove
+ stamp-h handling in AC_OUTPUT.
+ * acconfig.h: Mention PACKAGE and VERSION.
+ * stamp-h.in: New file.
+ * Makefile.in: Now built with automake.
+ * aclocal.m4: Now built with aclocal.
+ * config.in, configure: Rebuild.
+
From Ton van Overbeek <tvoverbe@wk.estec.esa.nl>:
* rcparse.y (dialog): Default menu and class to be named.
(styles): If FONT is seen, set DS_SETFONT in dialog style.
diff --git a/binutils/Makefile.am b/binutils/Makefile.am
new file mode 100644
index 0000000..6f3809c
--- /dev/null
+++ b/binutils/Makefile.am
@@ -0,0 +1,433 @@
+## Process this file with automake to generate Makefile.in
+
+AUTOMAKE_OPTIONS = dejagnu
+
+tooldir = $(exec_prefix)/$(target_alias)
+
+CC_FOR_BUILD = @CC_FOR_BUILD@
+
+YACC = `if [ -f ../bison/bison ] ; then echo ../bison/bison -y -L../bison/bison ; else echo bison -y ; fi`
+YFLAGS = -d
+LEX = `if [ -f ../flex/flex ] ; then echo ../flex/flex ; else echo flex ; fi`
+
+# these two are almost the same program
+AR_PROG=ar
+RANLIB_PROG=ranlib
+
+# objcopy and strip should be the same program
+OBJCOPY_PROG=objcopy
+STRIP_PROG=strip.new
+
+STRINGS_PROG=strings
+
+# These should all be the same program too.
+SIZE_PROG=size
+NM_PROG=nm.new
+OBJDUMP_PROG=objdump
+
+# This is the demangler, as a standalone program.
+# Note: This one is used as the installed name too, unlike the above.
+DEMANGLER_PROG=c++filt
+
+ADDR2LINE_PROG=addr2line
+
+NLMCONV_PROG=nlmconv
+DLLTOOL_PROG=dlltool
+WINDRES_PROG=windres
+
+SRCONV_PROG=srconv sysdump coffdump
+
+man_MANS = ar.1 nm.1 objdump.1 ranlib.1 size.1 strings.1 strip.1 objcopy.1 \
+ addr2line.1 nlmconv.1 $(DEMANGLER_PROG).1
+
+PROGS = $(SIZE_PROG) $(OBJDUMP_PROG) $(NM_PROG) $(AR_PROG) $(STRINGS_PROG) $(STRIP_PROG) $(RANLIB_PROG) $(DEMANGLER_PROG) $(OBJCOPY_PROG) $(ADDR2LINE_PROG) @BUILD_NLMCONV@ @BUILD_SRCONV@ @BUILD_DLLTOOL@ @BUILD_WINDRES@
+
+bin_PROGRAMS = $(SIZE_PROG) $(OBJDUMP_PROG) $(AR_PROG) $(STRINGS_PROG) \
+ $(RANLIB_PROG) $(DEMANGLER_PROG) $(OBJCOPY_PROG) $(ADDR2LINE_PROG) \
+ @BUILD_NLMCONV@ @BUILD_SRCONV@ @BUILD_DLLTOOL@ @BUILD_WINDRES@
+
+## We need a special rule to install the programs which are built with .new
+noinst_PROGRAMS = $(NM_PROG) $(STRIP_PROG)
+
+EXTRA_PROGRAMS = $(NLMCONV_PROG) $(SRCONV_PROG) $(DLLTOOL_PROG) $(WINDRES_PROG)
+
+# Stuff that goes in tooldir/ if appropriate
+TOOL_PROGS = nm.new strip.new ar ranlib $(DLLTOOL_PROG)
+
+BASEDIR = $(srcdir)/..
+BFDDIR = $(BASEDIR)/bfd
+INCDIR = $(BASEDIR)/include
+
+DEP = mkdep
+
+INCLUDES = -D_GNU_SOURCE -I. -I$(srcdir) -I../bfd -I$(BFDDIR) -I$(INCDIR) @HDEFINES@
+
+HFILES = arsup.h bucomm.h budbg.h coffgrok.h debug.h nlmconv.h dlltool.h \
+ windres.h
+
+GENERATED_HFILES = arparse.h sysroff.h sysinfo.h defparse.h
+
+CFILES = addr2line.c ar.c arsup.c bucomm.c coffdump.c coffgrok.c debug.c \
+ dlltool.c filemode.c ieee.c is-ranlib.c is-strip.c maybe-ranlib.c \
+ maybe-strip.c nlmconv.c nm.c not-ranlib.c not-strip.c \
+ objcopy.c objdump.c prdbg.c rdcoff.c rddbg.c size.c srconv.c \
+ stabs.c strings.c sysdump.c version.c wrstabs.c \
+ windres.c resrc.c rescoff.c resbin.c
+
+GENERATED_CFILES = \
+ underscore.c arparse.c arlex.c sysroff.c sysinfo.c syslex.c \
+ defparse.c deflex.c nlmheader.c rcparse.c rclex.c
+
+DEBUG_SRCS = rddbg.c debug.c stabs.c ieee.c rdcoff.c
+WRITE_DEBUG_SRCS = $(DEBUG_SRCS) wrstabs.c
+
+# Code shared by all the binutils.
+BULIBS = bucomm.c version.c filemode.c
+
+BFDLIB = ../bfd/libbfd.la
+
+OPCODES = ../opcodes/libopcodes.la
+
+LIBIBERTY = ../libiberty/libiberty.a
+
+EXPECT = `if [ -f $$r/../expect/expect ] ; then \
+ echo $$r/../expect/expect ; \
+ else echo expect ; fi`
+RUNTEST = `if [ -f ${srcdir}/../dejagnu/runtest ] ; then \
+ echo ${srcdir}/../dejagnu/runtest ; \
+ else echo runtest ; fi`
+
+CC_FOR_TARGET = ` \
+ if [ -f $$r/../gcc/xgcc ] ; then \
+ if [ -f $$r/../newlib/Makefile ] ; then \
+ echo $$r/../gcc/xgcc -B$$r/../gcc/ -idirafter $$r/../newlib/targ-include -idirafter $${srcroot}/../newlib/libc/include -nostdinc; \
+ else \
+ echo $$r/../gcc/xgcc -B$$r/../gcc/; \
+ fi; \
+ else \
+ if [ "@host@" = "@target@" ] ; then \
+ echo $(CC); \
+ else \
+ echo gcc | sed '$(program_transform_name)'; \
+ fi; \
+ fi`
+
+check-DEJAGNU: site.exp
+ srcdir=`cd $(srcdir) && pwd`; export srcdir; \
+ EXPECT=$(EXPECT); export EXPECT; \
+ if [ -f $(top_builddir)/../expect/expect ]; then \
+ TCL_LIBRARY=`cd $(top_srcdir)/../tcl/library && pwd`; \
+ export TCL_LIBRARY; \
+ fi; \
+ runtest=$(RUNTEST); \
+ if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \
+ $$runtest --tool $(DEJATOOL) --srcdir $${srcdir}/testsuite \
+ CC_FOR_TARGET="$(CC_FOR_TARGET)" \
+ CFLAGS_FOR_TARGET="$(CFLAGS)" $(RUNTESTFLAGS); \
+ else echo "WARNING: could not find \`runtest'" 1>&2; :;\
+ fi
+
+installcheck:
+ /bin/sh $(srcdir)/sanity.sh $(bindir)
+
+info_TEXINFOS = binutils.texi
+
+LDADD = $(BFDLIB) $(LIBIBERTY)
+
+size_SOURCES = size.c $(BULIBS)
+
+objcopy_SOURCES = objcopy.c not-strip.c $(WRITE_DEBUG_SRCS) $(BULIBS)
+
+strings_SOURCES = strings.c $(BULIBS)
+
+strip_new_SOURCES = objcopy.c is-strip.c $(WRITE_DEBUG_SRCS) $(BULIBS)
+
+nm_new_SOURCES = nm.c $(BULIBS)
+
+objdump_SOURCES = objdump.c prdbg.c $(DEBUG_SRCS) $(BULIBS)
+objdump_LDADD = $(OPCODES) $(BFDLIB) $(LIBIBERTY)
+
+underscore.c: stamp-under ; @true
+
+stamp-under: Makefile
+ echo '/*WARNING: This file is automatically generated!*/' >underscore.t
+ echo "int prepends_underscore = @UNDERSCORE@;" >>underscore.t
+ $(SHELL) $(srcdir)/../move-if-change underscore.t underscore.c
+ touch stamp-under
+
+version.o: version.c Makefile
+ $(COMPILE) -c -DVERSION='"$(VERSION)"' $(srcdir)/version.c
+
+bucomm.o: bucomm.c Makefile
+ $(COMPILE) -c -DTARGET='"@target@"' $(srcdir)/bucomm.c
+
+cplus-dem.o: $(BASEDIR)/libiberty/cplus-dem.c $(INCDIR)/getopt.h
+ $(COMPILE) -c -DMAIN -DVERSION='"$(VERSION)"' $(BASEDIR)/libiberty/cplus-dem.c
+
+c__filt_SOURCES =
+c__filt_LDADD = cplus-dem.o underscore.o $(LIBIBERTY)
+
+ar_SOURCES = arparse.y arlex.l ar.c not-ranlib.c arsup.c $(BULIBS)
+ar_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@
+
+ranlib_SOURCES = ar.c is-ranlib.c arparse.y arlex.l arsup.c $(BULIBS)
+ranlib_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@
+
+addr2line_SOURCES = addr2line.c $(BULIBS)
+
+# The following is commented out for the convertion to automake.
+# This rule creates a single binary that switches between ar and ranlib
+# by looking at argv[0]. Use this kludge to save some disk space.
+# However, you have to install things by hand.
+# (That is after 'make install', replace the installed ranlib by a link to ar.)
+# Alternatively, you can install ranlib.sh as ranlib.
+# ar_with_ranlib: $(ADDL_DEPS) ar.o maybe-ranlib.o
+# $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(AR_PROG) ar.o maybe-ranlib.o $(ADDL_LIBS) $(EXTRALIBS)
+# -rm -f $(RANLIB_PROG)
+# -ln $(AR_PROG) $(RANLIB_PROG)
+#
+# objcopy and strip in one binary that uses argv[0] to decide its action.
+#
+#objcopy_with_strip: $(ADDL_DEPS) objcopy.o maybe-strip.o
+# $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(OBJCOPY_PROG) objcopy.o maybe-strip.o $(ADDL_LIBS) $(EXTRALIBS)
+# -rm -f $(STRIP_PROG)
+# -ln $(OBJCOPY_PROG) $(STRIP_PROG)
+
+sysroff.c: sysinfo sysroff.info
+ ./sysinfo -c <$(srcdir)/sysroff.info >sysroff.c
+ ./sysinfo -i <$(srcdir)/sysroff.info >>sysroff.c
+ ./sysinfo -g <$(srcdir)/sysroff.info >>sysroff.c
+
+sysroff.h: sysinfo sysroff.info
+ ./sysinfo -d <$(srcdir)/sysroff.info >sysroff.h
+
+sysinfo: sysinfo.o syslex.o
+ $(CC_FOR_BUILD) $(CFLAGS) $(LDFLAGS) -o $@ sysinfo.o syslex.o
+
+syslex.o: syslex.c sysinfo.h
+ if [ -r syslex.c ]; then \
+ $(CC_FOR_BUILD) -c -I. $(CFLAGS) syslex.c ; \
+ else \
+ $(CC_FOR_BUILD) -c -I. -I$(srcdir) $(CFLAGS) $(srcdir)/syslex.c ;\
+ fi
+
+sysinfo.o: sysinfo.c
+ if [ -r sysinfo.c ]; then \
+ $(CC_FOR_BUILD) -c -I. $(CFLAGS) sysinfo.c ; \
+ else \
+ $(CC_FOR_BUILD) -c -I. $(CFLAGS) $(srcdir)/sysinfo.c ; \
+ fi
+
+srconv_SOURCES = srconv.c coffgrok.c $(BULIBS)
+
+dlltool_SOURCES = dlltool.c defparse.y deflex.l $(BULIBS)
+dlltool_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@
+
+dlltool.o:dlltool.c
+ $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/dlltool.c
+
+coffdump_SOURCES = coffdump.c coffgrok.c $(BULIBS)
+
+sysdump_SOURCES = sysdump.c $(BULIBS)
+
+# coff/sym.h and coff/ecoff.h won't be found by the automatic dependency
+# scripts, since they are only included conditionally.
+nlmconv.o: nlmconv.c $(INCDIR)/coff/sym.h $(INCDIR)/coff/ecoff.h
+ ldname=`echo ld | sed '$(program_transform_name)'`; \
+ $(COMPILE) -c -DLD_NAME="\"$${ldname}\"" @NLMCONV_DEFS@ $(srcdir)/nlmconv.c
+
+nlmconv_SOURCES = nlmconv.c nlmheader.y $(BULIBS)
+
+windres_SOURCES = windres.c resrc.c rescoff.c resbin.c rcparse.y rclex.l
+windres_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@
+
+# Targets to rebuild dependencies in this Makefile.
+# Have to get rid of .dep1 here so that "$?" later includes all of $(CFILES).
+.dep: dep.sed $(CFILES) $(HFILES) $(GENERATED_CFILES) $(GENERATED_HFILES) config.h
+ rm -f .dep1
+ $(MAKE) DEP=$(DEP) .dep1
+ sed -f dep.sed <.dep1 >.dep
+
+# This rule really wants a mkdep that runs "gcc -MM".
+.dep1: $(CFILES) $(GENERATED_CFILES)
+ rm -f .dep2
+ echo '# DO NOT DELETE THIS LINE -- mkdep uses it.' > .dep2
+ $(DEP) -f .dep2 $(ALL_CFLAGS) $?
+ $(SHELL) $(srcdir)/../move-if-change .dep2 .dep1
+
+dep.sed: dep-in.sed config.status
+ sed <$(srcdir)/dep-in.sed >dep.sed \
+ -e 's!@INCDIR@!$(INCDIR)!' \
+ -e 's!@BFDDIR@!$(BFDDIR)!' \
+ -e 's!@SRCDIR@!$(srcdir)!'
+
+dep: .dep
+ sed -e '/^..DO NOT DELETE THIS LINE/,$$d' < Makefile > tmp-Makefile
+ cat .dep >> tmp-Makefile
+ $(SHELL) $(srcdir)/../move-if-change tmp-Makefile Makefile
+
+dep-in: .dep
+ sed -e '/^..DO NOT DELETE THIS LINE/,$$d' < $(srcdir)/Makefile.in > tmp-Makefile.in
+ cat .dep >> tmp-Makefile.in
+ $(SHELL) $(srcdir)/../move-if-change tmp-Makefile.in $(srcdir)/Makefile.in
+
+dep-am: .dep
+ sed -e '/^..DO NOT DELETE THIS LINE/,$$d' < $(srcdir)/Makefile.am > tmp-Makefile.am
+ cat .dep >> tmp-Makefile.am
+ $(SHELL) $(srcdir)/../move-if-change tmp-Makefile.am $(srcdir)/Makefile.am
+
+.PHONY: dep dep-in dep-am
+
+###
+# DOCUMENTATION TARGETS
+config.texi: Makefile
+ rm -f config.texi
+ echo '@set VERSION $(VERSION)' > config.texi
+
+binutils.dvi: $(srcdir)/binutils.texi config.texi
+
+binutils.info: $(srcdir)/binutils.texi config.texi
+
+$(DEMANGLER_PROG).1: cxxfilt.man Makefile
+ sed -e 's/@PROGRAM@/$(DEMANGLER_PROG)/' < $(srcdir)/cxxfilt.man \
+ > $(DEMANGLER_PROG).1
+
+CLEANFILES = dep.sed .dep .dep1
+
+.PHONY: install-exec-local
+
+install-exec-local: $(bin_PROGRAMS) $(noinst_PROGRAMS)
+ @list='$(noinst_PROGRAMS)'; for p in $$list; do \
+ if test -f $$p; then \
+ echo " $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(bindir)/`echo $$p|sed -e 's/.new//'|sed '$(transform)'`$(EXEEXT)"; \
+ $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(bindir)/`echo $$p|sed -e 's/.new//'|sed '$(transform)'`$(EXEEXT); \
+ else :; fi; \
+ done
+ for i in $(TOOL_PROGS); do \
+ if [ -f $$i ]; then \
+ j=`echo $$i | sed -e 's/.new//'`; \
+ rm -f $(tooldir)/bin/$$j; \
+ k=`echo $$j | sed '$(transform)'`; \
+ ln $(bindir)/$$k $(tooldir)/bin/$$j >/dev/null 2>/dev/null \
+ || $(INSTALL_PROGRAM) $$i $(tooldir)/bin/$$j; \
+ else true; \
+ fi; \
+ done
+
+# What appears below is generated by a hacked mkdep using gcc -MM.
+
+# DO NOT DELETE THIS LINE -- mkdep uses it.
+# DO NOT PUT ANYTHING AFTER THIS LINE, IT WILL GO AWAY.
+
+addr2line.o: addr2line.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
+ $(INCDIR)/getopt.h $(INCDIR)/libiberty.h $(INCDIR)/demangle.h \
+ bucomm.h config.h $(INCDIR)/fopen-same.h
+ar.o: ar.c ../bfd/bfd.h $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h \
+ $(INCDIR)/progress.h bucomm.h config.h $(INCDIR)/fopen-same.h \
+ $(INCDIR)/aout/ar.h $(BFDDIR)/libbfd.h arsup.h
+arsup.o: arsup.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
+ arsup.h $(INCDIR)/libiberty.h bucomm.h config.h $(INCDIR)/fopen-same.h
+bucomm.o: bucomm.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
+ $(INCDIR)/libiberty.h bucomm.h config.h $(INCDIR)/fopen-same.h
+coffdump.o: coffdump.c coffgrok.h bucomm.h config.h \
+ $(INCDIR)/fopen-same.h
+coffgrok.o: coffgrok.c bucomm.h config.h $(INCDIR)/fopen-same.h \
+ $(INCDIR)/coff/internal.h $(BFDDIR)/libcoff.h $(INCDIR)/bfdlink.h \
+ coffgrok.h
+debug.o: debug.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
+ bucomm.h config.h $(INCDIR)/fopen-same.h $(INCDIR)/libiberty.h \
+ debug.h
+dlltool.o: dlltool.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
+ $(INCDIR)/libiberty.h bucomm.h config.h $(INCDIR)/fopen-same.h \
+ $(INCDIR)/getopt.h $(INCDIR)/demangle.h dlltool.h
+filemode.o: filemode.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
+ bucomm.h config.h $(INCDIR)/fopen-same.h
+ieee.o: ieee.c ../bfd/bfd.h $(INCDIR)/ansidecl.h $(INCDIR)/ieee.h \
+ bucomm.h config.h $(INCDIR)/fopen-same.h $(INCDIR)/libiberty.h \
+ debug.h budbg.h
+is-ranlib.o: is-ranlib.c
+is-strip.o: is-strip.c
+maybe-ranlib.o: maybe-ranlib.c
+maybe-strip.o: maybe-strip.c
+nlmconv.o: nlmconv.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
+ $(INCDIR)/libiberty.h bucomm.h config.h $(INCDIR)/fopen-same.h \
+ $(BFDDIR)/libnlm.h $(INCDIR)/nlm/common.h $(INCDIR)/nlm/internal.h \
+ $(INCDIR)/nlm/external.h nlmconv.h
+nm.o: nm.c ../bfd/bfd.h $(INCDIR)/ansidecl.h $(INCDIR)/progress.h \
+ bucomm.h config.h $(INCDIR)/fopen-same.h $(INCDIR)/getopt.h \
+ $(INCDIR)/aout/stab_gnu.h $(INCDIR)/aout/stab.def $(INCDIR)/aout/ranlib.h \
+ $(INCDIR)/demangle.h $(INCDIR)/libiberty.h
+not-ranlib.o: not-ranlib.c
+not-strip.o: not-strip.c
+objcopy.o: objcopy.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
+ $(INCDIR)/progress.h bucomm.h config.h $(INCDIR)/fopen-same.h \
+ $(INCDIR)/getopt.h $(INCDIR)/libiberty.h budbg.h
+objdump.o: objdump.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
+ $(INCDIR)/getopt.h $(INCDIR)/progress.h bucomm.h config.h \
+ $(INCDIR)/fopen-same.h $(INCDIR)/dis-asm.h $(INCDIR)/libiberty.h \
+ $(INCDIR)/demangle.h debug.h budbg.h $(INCDIR)/aout/aout64.h
+prdbg.o: prdbg.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
+ bucomm.h config.h $(INCDIR)/fopen-same.h $(INCDIR)/libiberty.h \
+ debug.h budbg.h
+rdcoff.o: rdcoff.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
+ $(INCDIR)/coff/internal.h bucomm.h config.h $(INCDIR)/fopen-same.h \
+ $(INCDIR)/libiberty.h $(INCDIR)/demangle.h debug.h \
+ budbg.h $(BFDDIR)/libcoff.h $(INCDIR)/bfdlink.h
+rddbg.o: rddbg.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
+ bucomm.h config.h $(INCDIR)/fopen-same.h $(INCDIR)/libiberty.h \
+ debug.h budbg.h
+size.o: size.c ../bfd/bfd.h $(INCDIR)/ansidecl.h $(INCDIR)/getopt.h \
+ bucomm.h config.h $(INCDIR)/fopen-same.h $(INCDIR)/libiberty.h
+srconv.o: srconv.c bucomm.h config.h $(INCDIR)/fopen-same.h \
+ sysroff.h coffgrok.h $(INCDIR)/coff/internal.h $(BFDDIR)/libcoff.h \
+ $(INCDIR)/bfdlink.h sysroff.c
+stabs.o: stabs.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
+ bucomm.h config.h $(INCDIR)/fopen-same.h $(INCDIR)/libiberty.h \
+ $(INCDIR)/demangle.h debug.h budbg.h $(INCDIR)/aout/aout64.h \
+ $(INCDIR)/aout/stab_gnu.h $(INCDIR)/aout/stab.def
+strings.o: strings.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
+ bucomm.h config.h $(INCDIR)/fopen-same.h $(INCDIR)/libiberty.h
+sysdump.o: sysdump.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
+ bucomm.h config.h $(INCDIR)/fopen-same.h sysroff.h \
+ sysroff.c
+version.o: version.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
+ bucomm.h config.h $(INCDIR)/fopen-same.h
+wrstabs.o: wrstabs.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
+ bucomm.h config.h $(INCDIR)/fopen-same.h $(INCDIR)/libiberty.h \
+ debug.h budbg.h $(INCDIR)/aout/aout64.h $(INCDIR)/aout/stab_gnu.h \
+ $(INCDIR)/aout/stab.def
+windres.o: windres.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
+ $(INCDIR)/getopt.h bucomm.h config.h $(INCDIR)/fopen-same.h \
+ $(INCDIR)/libiberty.h $(INCDIR)/obstack.h windres.h
+resrc.o: resrc.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
+ bucomm.h config.h $(INCDIR)/fopen-same.h $(INCDIR)/libiberty.h \
+ windres.h
+rescoff.o: rescoff.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
+ bucomm.h config.h $(INCDIR)/fopen-same.h $(INCDIR)/libiberty.h \
+ windres.h $(INCDIR)/coff/internal.h $(BFDDIR)/libcoff.h \
+ $(INCDIR)/bfdlink.h
+resbin.o: resbin.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
+ bucomm.h config.h $(INCDIR)/fopen-same.h $(INCDIR)/libiberty.h \
+ windres.h
+underscore.o: underscore.c
+arparse.o: arparse.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
+ bucomm.h config.h $(INCDIR)/fopen-same.h arsup.h
+arlex.o: arlex.c $(INCDIR)/libiberty.h arparse.h
+sysroff.o: sysroff.c
+sysinfo.o: sysinfo.c
+syslex.o: syslex.c sysinfo.h
+defparse.o: defparse.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
+ bucomm.h config.h $(INCDIR)/fopen-same.h dlltool.h
+deflex.o: deflex.c $(INCDIR)/libiberty.h $(INCDIR)/ansidecl.h \
+ defparse.h dlltool.h
+nlmheader.o: nlmheader.c ../bfd/bfd.h bucomm.h config.h \
+ $(INCDIR)/fopen-same.h $(INCDIR)/nlm/common.h $(INCDIR)/nlm/internal.h \
+ nlmconv.h
+rcparse.o: rcparse.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
+ bucomm.h config.h $(INCDIR)/fopen-same.h $(INCDIR)/libiberty.h \
+ windres.h
+rclex.o: rclex.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
+ bucomm.h config.h $(INCDIR)/fopen-same.h $(INCDIR)/libiberty.h \
+ windres.h rcparse.h
+
+# IF YOU PUT ANYTHING HERE IT WILL GO AWAY
diff --git a/binutils/Makefile.in b/binutils/Makefile.in
index 15e1c8d..75a32b4 100644
--- a/binutils/Makefile.in
+++ b/binutils/Makefile.in
@@ -1,84 +1,89 @@
-# Makefile for GNU binary-file utilities
-# Copyright (C) 1992, 93, 94, 95, 96, 1997 Free Software Foundation, Inc.
-
-# This file is part of GNU binutils.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+# Makefile.in generated automatically by automake 1.2 from Makefile.am
-VPATH = @srcdir@
-srcdir = @srcdir@
+# Copyright (C) 1994, 1995, 1996, 1997 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
-target_alias = @target_alias@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
+SHELL = /bin/sh
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+prefix = @prefix@
exec_prefix = @exec_prefix@
-bindir = @bindir@
-libdir = @libdir@
-tooldir = $(exec_prefix)/$(target_alias)
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
datadir = @datadir@
-mandir = @mandir@
-man1dir = $(mandir)/man1
-man2dir = $(mandir)/man2
-man3dir = $(mandir)/man3
-man4dir = $(mandir)/man4
-man5dir = $(mandir)/man5
-man6dir = $(mandir)/man6
-man7dir = $(mandir)/man7
-man8dir = $(mandir)/man8
-man9dir = $(mandir)/man9
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
infodir = @infodir@
+mandir = @mandir@
includedir = @includedir@
+oldincludedir = /usr/include
-SHELL = /bin/sh
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+
+top_builddir = .
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
-
-AR = ar
-AR_FLAGS = rc
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+transform = @program_transform_name@
+
+NORMAL_INSTALL = true
+PRE_INSTALL = true
+POST_INSTALL = true
+NORMAL_UNINSTALL = true
+PRE_UNINSTALL = true
+POST_UNINSTALL = true
+build_alias = @build_alias@
+build_triplet = @build@
+host_alias = @host_alias@
+host_triplet = @host@
+target_alias = @target_alias@
+target_triplet = @target@
+AR = @AR@
+BUILD_DLLTOOL = @BUILD_DLLTOOL@
+BUILD_NLMCONV = @BUILD_NLMCONV@
+BUILD_SRCONV = @BUILD_SRCONV@
+BUILD_WINDRES = @BUILD_WINDRES@
CC = @CC@
-CFLAGS = @CFLAGS@
-LDFLAGS = @LDFLAGS@
-HLDFLAGS = @HLDFLAGS@
-HLDENV = @HLDENV@
-RPATH_ENVVAR = @RPATH_ENVVAR@
-MAKEINFO = makeinfo
-TEXI2DVI = texi2dvi
-RANLIB = ranlib
-BISONFLAGS = -d
-TEXI2ROFF=texi2roff
-MAKEOVERRIDES=
-CC_FOR_BUILD = @CC_FOR_BUILD@
-NM_FOR_TARGET = nm
-NM = $(NM_FOR_TARGET)
-SYMLINK = ln -s
+DLLTOOL_DEFS = @DLLTOOL_DEFS@
+EXEEXT = @EXEEXT@
+HDEFINES = @HDEFINES@
+LD = @LD@
+LIBTOOL = @LIBTOOL@
+LN_S = @LN_S@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+NLMCONV_DEFS = @NLMCONV_DEFS@
+PACKAGE = @PACKAGE@
+RANLIB = @RANLIB@
+UNDERSCORE = @UNDERSCORE@
+VERSION = @VERSION@
+
+AUTOMAKE_OPTIONS = dejagnu
-BISON = `if [ -f ../bison/bison ] ; then echo ../bison/bison -y -L../bison/bison ; else echo bison -y ; fi`
-LEX_OPTIONS =
-LEX = `if [ -f ../flex/flex ] ; then echo ../flex/flex ; else echo flex ; fi`
+tooldir = $(exec_prefix)/$(target_alias)
-# Distribution version
-VERSION=cygnus-2.8.1
-# Distribution name
-DIST_NAME=binutils-${VERSION}
+CC_FOR_BUILD = @CC_FOR_BUILD@
-# Where to find texinfo.tex to format docn with TeX
-TEXIDIR = $(srcdir)/../texinfo
+YACC = `if [ -f ../bison/bison ] ; then echo ../bison/bison -y -L../bison/bison ; else echo bison -y ; fi`
+YFLAGS = -d
+LEX = `if [ -f ../flex/flex ] ; then echo ../flex/flex ; else echo flex ; fi`
# these two are almost the same program
AR_PROG=ar
@@ -107,15 +112,18 @@ WINDRES_PROG=windres
SRCONV_PROG=srconv sysdump coffdump
-MANPAGES= ar nm objdump ranlib size strings strip objcopy addr2line nlmconv
+man_MANS = ar.1 nm.1 objdump.1 ranlib.1 size.1 strings.1 strip.1 objcopy.1 \
+ addr2line.1 nlmconv.1 $(DEMANGLER_PROG).1
PROGS = $(SIZE_PROG) $(OBJDUMP_PROG) $(NM_PROG) $(AR_PROG) $(STRINGS_PROG) $(STRIP_PROG) $(RANLIB_PROG) $(DEMANGLER_PROG) $(OBJCOPY_PROG) $(ADDR2LINE_PROG) @BUILD_NLMCONV@ @BUILD_SRCONV@ @BUILD_DLLTOOL@ @BUILD_WINDRES@
-STAGESTUFF = $(PROGS) *.o
-# Files that can be generated, but should be in the distribution.
-# Don't build $(DEMANGLER_PROG).1, since its name may vary with the
-# configuration.
-DISTSTUFF=arparse.c arparse.h arlex.c nlmheader.c sysinfo.c sysinfo.h \
- syslex.c deflex.c
+
+bin_PROGRAMS = $(SIZE_PROG) $(OBJDUMP_PROG) $(AR_PROG) $(STRINGS_PROG) \
+ $(RANLIB_PROG) $(DEMANGLER_PROG) $(OBJCOPY_PROG) $(ADDR2LINE_PROG) \
+ @BUILD_NLMCONV@ @BUILD_SRCONV@ @BUILD_DLLTOOL@ @BUILD_WINDRES@
+
+noinst_PROGRAMS = $(NM_PROG) $(STRIP_PROG)
+
+EXTRA_PROGRAMS = $(NLMCONV_PROG) $(SRCONV_PROG) $(DLLTOOL_PROG) $(WINDRES_PROG)
# Stuff that goes in tooldir/ if appropriate
TOOL_PROGS = nm.new strip.new ar ranlib $(DLLTOOL_PROG)
@@ -123,10 +131,10 @@ TOOL_PROGS = nm.new strip.new ar ranlib $(DLLTOOL_PROG)
BASEDIR = $(srcdir)/..
BFDDIR = $(BASEDIR)/bfd
INCDIR = $(BASEDIR)/include
-INCLUDES = -I. -I$(srcdir) -I../bfd -I$(BFDDIR) -I$(INCDIR)
+
DEP = mkdep
-ALL_CFLAGS = -D_GNU_SOURCE $(INCLUDES) @HDEFINES@ $(CFLAGS)
+INCLUDES = -D_GNU_SOURCE -I. -I$(srcdir) -I../bfd -I$(BFDDIR) -I$(INCDIR) @HDEFINES@
HFILES = arsup.h bucomm.h budbg.h coffgrok.h debug.h nlmconv.h dlltool.h \
windres.h
@@ -144,25 +152,17 @@ GENERATED_CFILES = \
underscore.c arparse.c arlex.c sysroff.c sysinfo.c syslex.c \
defparse.c deflex.c nlmheader.c rcparse.c rclex.c
-.c.o:
- $(CC) -c $(ALL_CFLAGS) $<
-
-DEBUG_OBJS = rddbg.o debug.o stabs.o ieee.o rdcoff.o
-WRITE_DEBUG_OBJS = $(DEBUG_OBJS) wrstabs.o
-
-LIBIBERTY = ../libiberty/libiberty.a
+DEBUG_SRCS = rddbg.c debug.c stabs.c ieee.c rdcoff.c
+WRITE_DEBUG_SRCS = $(DEBUG_SRCS) wrstabs.c
# Code shared by all the binutils.
-BULIBS = bucomm.o version.o filemode.o
+BULIBS = bucomm.c version.c filemode.c
-BFDLIB_DEP = ../bfd/libbfd.a
-BFDLIB = @BFDLIB@
+BFDLIB = ../bfd/libbfd.la
-OPCODES_DEP = ../opcodes/libopcodes.a
-OPCODES = @OPCODES@
+OPCODES = ../opcodes/libopcodes.la
-ADDL_DEPS = $(BULIBS) $(BFDLIB_DEP) $(LIBIBERTY)
-ADDL_LIBS = $(BULIBS) $(BFDLIB) $(LIBIBERTY)
+LIBIBERTY = ../libiberty/libiberty.a
EXPECT = `if [ -f $$r/../expect/expect ] ; then \
echo $$r/../expect/expect ; \
@@ -170,7 +170,6 @@ EXPECT = `if [ -f $$r/../expect/expect ] ; then \
RUNTEST = `if [ -f ${srcdir}/../dejagnu/runtest ] ; then \
echo ${srcdir}/../dejagnu/runtest ; \
else echo runtest ; fi`
-RUNTESTFLAGS =
CC_FOR_TARGET = ` \
if [ -f $$r/../gcc/xgcc ] ; then \
@@ -187,83 +186,712 @@ CC_FOR_TARGET = ` \
fi; \
fi`
-FLAGS_TO_PASS = \
- "CC=$(CC)" \
- "CFLAGS=$(CFLAGS)" \
- "RUNTEST=$(RUNTEST)" \
- "RUNTESTFLAGS=$(RUNTESTFLAGS)"
-#
-## The rules
-
-all: $(ADDL_DEPS) $(PROGS)
-
-# These targets are for the dejagnu testsuites. The file site.exp
-# contains global variables that all the testsuites will use.
-
-site.exp: ./config.status Makefile
- @echo "Making a new config file..."
- @rm -f ./tmp?
- @touch site.exp
- @mv site.exp site.bak
- @echo "## variables are automatically generated by make ##" > ./tmp0
- @echo "# Do not edit here. If you wish to override these" >> ./tmp0
- @echo "# values, add them to the last section" >> ./tmp0
- @echo "# HOST AND TARGET INFO" >> ./tmp0
- @echo "set host_os @host_os@" >> ./tmp0
- @echo "set host_alias @host_alias@" >> ./tmp0
- @echo "set host_cpu @host_cpu@" >> ./tmp0
- @echo "set host_vendor @host_vendor@" >> ./tmp0
- @echo "set target_os @target_os@" >> ./tmp0
- @echo "set target_alias @target_alias@" >> ./tmp0
- @echo "set target_cpu @target_cpu@" >> ./tmp0
- @echo "set target_vendor @target_vendor@" >> ./tmp0
- @echo "set host_triplet @host@" >> ./tmp0
- @echo "set target_triplet @target@" >> ./tmp0
- @echo "# DIRECTORY INFO" >> ./tmp0
- @echo "set objdir `pwd`" >> ./tmp0
- @echo "" >> ./tmp0
- @echo "## Variables generated by configure. Do Not Edit ##" >> ./tmp0
- @cat ./tmp0 > site.exp
- @cat site.bak | sed \
- -e '1,/^## Variables generated by.*##/ d' >> site.exp
- -@rm -f ./tmp?
-
-check: site.exp
- r=`pwd`; export r ; \
- srcroot=`cd ${srcdir}; pwd` ; export srcroot ; \
- EXPECT=${EXPECT} ; export EXPECT ; \
- $(RPATH_ENVVAR)=$$r/../bfd:$$r/../opcodes:$$$(RPATH_ENVVAR); \
- export $(RPATH_ENVVAR); \
- if [ -f $$r/../expect/expect ] ; then \
- TCL_LIBRARY=$${srcroot}/../tcl/library ; \
- export TCL_LIBRARY ; else true; fi ; \
- $(RUNTEST) --tool binutils --srcdir $(srcdir)/testsuite \
- $(RUNTESTFLAGS) CC_FOR_TARGET="$(CC_FOR_TARGET)" CFLAGS_FOR_TARGET="$(CFLAGS)"
+info_TEXINFOS = binutils.texi
-installcheck:
- /bin/sh $(srcdir)/sanity.sh $(bindir)
+LDADD = $(BFDLIB) $(LIBIBERTY)
+
+size_SOURCES = size.c $(BULIBS)
+
+objcopy_SOURCES = objcopy.c not-strip.c $(WRITE_DEBUG_SRCS) $(BULIBS)
+
+strings_SOURCES = strings.c $(BULIBS)
+
+strip_new_SOURCES = objcopy.c is-strip.c $(WRITE_DEBUG_SRCS) $(BULIBS)
+
+nm_new_SOURCES = nm.c $(BULIBS)
+
+objdump_SOURCES = objdump.c prdbg.c $(DEBUG_SRCS) $(BULIBS)
+objdump_LDADD = $(OPCODES) $(BFDLIB) $(LIBIBERTY)
+
+c__filt_SOURCES =
+c__filt_LDADD = cplus-dem.o underscore.o $(LIBIBERTY)
+
+ar_SOURCES = arparse.y arlex.l ar.c not-ranlib.c arsup.c $(BULIBS)
+ar_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@
+
+ranlib_SOURCES = ar.c is-ranlib.c arparse.y arlex.l arsup.c $(BULIBS)
+ranlib_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@
+
+addr2line_SOURCES = addr2line.c $(BULIBS)
+
+srconv_SOURCES = srconv.c coffgrok.c $(BULIBS)
+
+dlltool_SOURCES = dlltool.c defparse.y deflex.l $(BULIBS)
+dlltool_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@
+
+coffdump_SOURCES = coffdump.c coffgrok.c $(BULIBS)
+
+sysdump_SOURCES = sysdump.c $(BULIBS)
+
+nlmconv_SOURCES = nlmconv.c nlmheader.y $(BULIBS)
+
+windres_SOURCES = windres.c resrc.c rescoff.c resbin.c rcparse.y rclex.l
+windres_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@
+
+CLEANFILES = dep.sed .dep .dep1
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
+CONFIG_HEADER = config.h
+CONFIG_CLEAN_FILES =
+PROGRAMS = $(bin_PROGRAMS) $(noinst_PROGRAMS)
+
+
+DEFS = @DEFS@ -I. -I$(srcdir) -I.
+CPPFLAGS = @CPPFLAGS@
+LDFLAGS = @LDFLAGS@
+LIBS = @LIBS@
+nlmconv_OBJECTS = nlmconv.o nlmheader.o bucomm.o version.o filemode.o
+nlmconv_LDADD = $(LDADD)
+nlmconv_DEPENDENCIES = ../bfd/libbfd.la ../libiberty/libiberty.a
+nlmconv_LDFLAGS =
+srconv_OBJECTS = srconv.o coffgrok.o bucomm.o version.o filemode.o
+srconv_LDADD = $(LDADD)
+srconv_DEPENDENCIES = ../bfd/libbfd.la ../libiberty/libiberty.a
+srconv_LDFLAGS =
+sysdump_OBJECTS = sysdump.o bucomm.o version.o filemode.o
+sysdump_LDADD = $(LDADD)
+sysdump_DEPENDENCIES = ../bfd/libbfd.la ../libiberty/libiberty.a
+sysdump_LDFLAGS =
+coffdump_OBJECTS = coffdump.o coffgrok.o bucomm.o version.o filemode.o
+coffdump_LDADD = $(LDADD)
+coffdump_DEPENDENCIES = ../bfd/libbfd.la ../libiberty/libiberty.a
+coffdump_LDFLAGS =
+dlltool_OBJECTS = dlltool.o defparse.o deflex.o bucomm.o version.o \
+filemode.o
+dlltool_DEPENDENCIES = ../bfd/libbfd.la ../libiberty/libiberty.a
+dlltool_LDFLAGS =
+windres_OBJECTS = windres.o resrc.o rescoff.o resbin.o rcparse.o \
+rclex.o
+windres_DEPENDENCIES = ../bfd/libbfd.la ../libiberty/libiberty.a
+windres_LDFLAGS =
+size_OBJECTS = size.o bucomm.o version.o filemode.o
+size_LDADD = $(LDADD)
+size_DEPENDENCIES = ../bfd/libbfd.la ../libiberty/libiberty.a
+size_LDFLAGS =
+objdump_OBJECTS = objdump.o prdbg.o rddbg.o debug.o stabs.o ieee.o \
+rdcoff.o bucomm.o version.o filemode.o
+objdump_DEPENDENCIES = ../opcodes/libopcodes.la ../bfd/libbfd.la \
+../libiberty/libiberty.a
+objdump_LDFLAGS =
+ar_OBJECTS = arparse.o arlex.o ar.o not-ranlib.o arsup.o bucomm.o \
+version.o filemode.o
+ar_DEPENDENCIES = ../bfd/libbfd.la ../libiberty/libiberty.a
+ar_LDFLAGS =
+strings_OBJECTS = strings.o bucomm.o version.o filemode.o
+strings_LDADD = $(LDADD)
+strings_DEPENDENCIES = ../bfd/libbfd.la ../libiberty/libiberty.a
+strings_LDFLAGS =
+ranlib_OBJECTS = ar.o is-ranlib.o arparse.o arlex.o arsup.o bucomm.o \
+version.o filemode.o
+ranlib_DEPENDENCIES = ../bfd/libbfd.la ../libiberty/libiberty.a
+ranlib_LDFLAGS =
+c__filt_OBJECTS =
+c__filt_DEPENDENCIES = cplus-dem.o underscore.o \
+../libiberty/libiberty.a
+c__filt_LDFLAGS =
+objcopy_OBJECTS = objcopy.o not-strip.o rddbg.o debug.o stabs.o ieee.o \
+rdcoff.o wrstabs.o bucomm.o version.o filemode.o
+objcopy_LDADD = $(LDADD)
+objcopy_DEPENDENCIES = ../bfd/libbfd.la ../libiberty/libiberty.a
+objcopy_LDFLAGS =
+addr2line_OBJECTS = addr2line.o bucomm.o version.o filemode.o
+addr2line_LDADD = $(LDADD)
+addr2line_DEPENDENCIES = ../bfd/libbfd.la ../libiberty/libiberty.a
+addr2line_LDFLAGS =
+nm_new_OBJECTS = nm.o bucomm.o version.o filemode.o
+nm_new_LDADD = $(LDADD)
+nm_new_DEPENDENCIES = ../bfd/libbfd.la ../libiberty/libiberty.a
+nm_new_LDFLAGS =
+strip_new_OBJECTS = objcopy.o is-strip.o rddbg.o debug.o stabs.o ieee.o \
+rdcoff.o wrstabs.o bucomm.o version.o filemode.o
+strip_new_LDADD = $(LDADD)
+strip_new_DEPENDENCIES = ../bfd/libbfd.la ../libiberty/libiberty.a
+strip_new_LDFLAGS =
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LEXLIB = @LEXLIB@
+YLWRAP = $(top_srcdir)/../ylwrap
+CFLAGS = @CFLAGS@
+COMPILE = $(CC) $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CFLAGS)
+LINK = $(LIBTOOL) --mode=link $(CC) $(CFLAGS) $(LDFLAGS) -o $@
+TEXI2DVI = `if test -f $(top_srcdir)/../texinfo/util/texi2dvi; then echo $(top_srcdir)/../texinfo/util/texi2dvi; else echo texi2dvi; fi`
+TEXINFO_TEX = $(top_srcdir)/../texinfo/texinfo.tex
+INFO_DEPS = binutils.info
+DVIS = binutils.dvi
+TEXINFOS = binutils.texi
+MANS = ar.1 nm.1 objdump.1 ranlib.1 size.1 strings.1 strip.1 objcopy.1 addr2line.1 nlmconv.1 $(DEMANGLER_PROG).1
+
+
+NROFF = nroff
+DIST_COMMON = README ChangeLog Makefile.am Makefile.in NEWS acconfig.h \
+acinclude.m4 aclocal.m4 arlex.c arparse.c config.in configure \
+configure.in deflex.c defparse.c nlmheader.c rclex.c rcparse.c \
+stamp-h.in
+
+
+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+TAR = tar
+GZIP = --best
+SOURCES = $(nlmconv_SOURCES) $(srconv_SOURCES) $(sysdump_SOURCES) $(coffdump_SOURCES) $(dlltool_SOURCES) $(windres_SOURCES) $(size_SOURCES) $(objdump_SOURCES) $(ar_SOURCES) $(strings_SOURCES) $(ranlib_SOURCES) $(c__filt_SOURCES) $(objcopy_SOURCES) $(addr2line_SOURCES) $(nm_new_SOURCES) $(strip_new_SOURCES)
+OBJECTS = $(nlmconv_OBJECTS) $(srconv_OBJECTS) $(sysdump_OBJECTS) $(coffdump_OBJECTS) $(dlltool_OBJECTS) $(windres_OBJECTS) $(size_OBJECTS) $(objdump_OBJECTS) $(ar_OBJECTS) $(strings_OBJECTS) $(ranlib_OBJECTS) $(c__filt_OBJECTS) $(objcopy_OBJECTS) $(addr2line_OBJECTS) $(nm_new_OBJECTS) $(strip_new_OBJECTS)
+
+default: all
+
+.SUFFIXES:
+.SUFFIXES: .c .dvi .h .info .l .lo .o .ps .texi .texinfo .y
+$(srcdir)/Makefile.in: @MAINT@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+ cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
+
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ cd $(top_builddir) \
+ && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+$(ACLOCAL_M4): @MAINT@ configure.in acinclude.m4
+ cd $(srcdir) && $(ACLOCAL)
+
+config.status: $(srcdir)/configure
+ $(SHELL) ./config.status --recheck
+$(srcdir)/configure: @MAINT@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
+ cd $(srcdir) && $(AUTOCONF)
+
+config.h: stamp-h
+stamp-h: $(srcdir)/config.in $(top_builddir)/config.status
+ cd $(top_builddir) \
+ && CONFIG_FILES= CONFIG_HEADERS=config.h:config.in \
+ $(SHELL) ./config.status
+ @echo timestamp > stamp-h
+$(srcdir)/config.in: @MAINT@$(srcdir)/stamp-h.in
+$(srcdir)/stamp-h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) acconfig.h
+ cd $(top_srcdir) && $(AUTOHEADER)
+ @echo timestamp > $(srcdir)/stamp-h.in
+
+mostlyclean-hdr:
+
+clean-hdr:
+
+distclean-hdr:
+ rm -f config.h
+
+maintainer-clean-hdr:
+
+mostlyclean-binPROGRAMS:
+
+clean-binPROGRAMS:
+ @list='$(bin_PROGRAMS)'; for p in $$list; do \
+ rm -f $$p $$p$(EXEEXT); \
+ done
+
+distclean-binPROGRAMS:
+
+maintainer-clean-binPROGRAMS:
+
+install-binPROGRAMS: $(bin_PROGRAMS)
+ @$(NORMAL_INSTALL)
+ $(mkinstalldirs) $(bindir)
+ @list='$(bin_PROGRAMS)'; for p in $$list; do \
+ if test -f $$p; then \
+ echo " $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(bindir)/`echo $$p|sed '$(transform)'`$(EXEEXT)"; \
+ $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(bindir)/`echo $$p|sed '$(transform)'`$(EXEEXT); \
+ else :; fi; \
+ done
+
+uninstall-binPROGRAMS:
+ $(NORMAL_UNINSTALL)
+ list='$(bin_PROGRAMS)'; for p in $$list; do \
+ rm -f $(bindir)/`echo $$p|sed '$(transform)'`$(EXEEXT); \
+ done
+
+mostlyclean-noinstPROGRAMS:
-info: binutils.info
+clean-noinstPROGRAMS:
+ @list='$(noinst_PROGRAMS)'; for p in $$list; do \
+ rm -f $$p $$p$(EXEEXT); \
+ done
+
+distclean-noinstPROGRAMS:
+
+maintainer-clean-noinstPROGRAMS:
+
+.c.o:
+ $(COMPILE) -c $<
+
+mostlyclean-compile:
+ rm -f *.o core
+
+clean-compile:
+
+distclean-compile:
+ rm -f *.tab.c
+
+maintainer-clean-compile:
+
+.c.lo:
+ $(LIBTOOL) --mode=compile $(COMPILE) -c $<
+
+mostlyclean-libtool:
+ rm -f *.lo
+
+clean-libtool:
+ rm -rf .libs
+
+distclean-libtool:
+
+maintainer-clean-libtool:
+
+nlmconv: $(nlmconv_OBJECTS) $(nlmconv_DEPENDENCIES)
+ @rm -f nlmconv$(EXEEXT)
+ $(LINK) $(nlmconv_LDFLAGS) $(nlmconv_OBJECTS) $(nlmconv_LDADD) $(LIBS)
+ @test -z "$(EXEEXT)" || echo timestamp > nlmconv
+
+srconv: $(srconv_OBJECTS) $(srconv_DEPENDENCIES)
+ @rm -f srconv$(EXEEXT)
+ $(LINK) $(srconv_LDFLAGS) $(srconv_OBJECTS) $(srconv_LDADD) $(LIBS)
+ @test -z "$(EXEEXT)" || echo timestamp > srconv
+
+sysdump: $(sysdump_OBJECTS) $(sysdump_DEPENDENCIES)
+ @rm -f sysdump$(EXEEXT)
+ $(LINK) $(sysdump_LDFLAGS) $(sysdump_OBJECTS) $(sysdump_LDADD) $(LIBS)
+ @test -z "$(EXEEXT)" || echo timestamp > sysdump
+
+coffdump: $(coffdump_OBJECTS) $(coffdump_DEPENDENCIES)
+ @rm -f coffdump$(EXEEXT)
+ $(LINK) $(coffdump_LDFLAGS) $(coffdump_OBJECTS) $(coffdump_LDADD) $(LIBS)
+ @test -z "$(EXEEXT)" || echo timestamp > coffdump
+
+dlltool: $(dlltool_OBJECTS) $(dlltool_DEPENDENCIES)
+ @rm -f dlltool$(EXEEXT)
+ $(LINK) $(dlltool_LDFLAGS) $(dlltool_OBJECTS) $(dlltool_LDADD) $(LIBS)
+ @test -z "$(EXEEXT)" || echo timestamp > dlltool
+
+windres: $(windres_OBJECTS) $(windres_DEPENDENCIES)
+ @rm -f windres$(EXEEXT)
+ $(LINK) $(windres_LDFLAGS) $(windres_OBJECTS) $(windres_LDADD) $(LIBS)
+ @test -z "$(EXEEXT)" || echo timestamp > windres
+
+size: $(size_OBJECTS) $(size_DEPENDENCIES)
+ @rm -f size$(EXEEXT)
+ $(LINK) $(size_LDFLAGS) $(size_OBJECTS) $(size_LDADD) $(LIBS)
+ @test -z "$(EXEEXT)" || echo timestamp > size
+
+objdump: $(objdump_OBJECTS) $(objdump_DEPENDENCIES)
+ @rm -f objdump$(EXEEXT)
+ $(LINK) $(objdump_LDFLAGS) $(objdump_OBJECTS) $(objdump_LDADD) $(LIBS)
+ @test -z "$(EXEEXT)" || echo timestamp > objdump
+
+ar: $(ar_OBJECTS) $(ar_DEPENDENCIES)
+ @rm -f ar$(EXEEXT)
+ $(LINK) $(ar_LDFLAGS) $(ar_OBJECTS) $(ar_LDADD) $(LIBS)
+ @test -z "$(EXEEXT)" || echo timestamp > ar
+
+strings: $(strings_OBJECTS) $(strings_DEPENDENCIES)
+ @rm -f strings$(EXEEXT)
+ $(LINK) $(strings_LDFLAGS) $(strings_OBJECTS) $(strings_LDADD) $(LIBS)
+ @test -z "$(EXEEXT)" || echo timestamp > strings
+
+ranlib: $(ranlib_OBJECTS) $(ranlib_DEPENDENCIES)
+ @rm -f ranlib$(EXEEXT)
+ $(LINK) $(ranlib_LDFLAGS) $(ranlib_OBJECTS) $(ranlib_LDADD) $(LIBS)
+ @test -z "$(EXEEXT)" || echo timestamp > ranlib
+
+c++filt: $(c__filt_OBJECTS) $(c__filt_DEPENDENCIES)
+ @rm -f c++filt$(EXEEXT)
+ $(LINK) $(c__filt_LDFLAGS) $(c__filt_OBJECTS) $(c__filt_LDADD) $(LIBS)
+ @test -z "$(EXEEXT)" || echo timestamp > c++filt
+
+objcopy: $(objcopy_OBJECTS) $(objcopy_DEPENDENCIES)
+ @rm -f objcopy$(EXEEXT)
+ $(LINK) $(objcopy_LDFLAGS) $(objcopy_OBJECTS) $(objcopy_LDADD) $(LIBS)
+ @test -z "$(EXEEXT)" || echo timestamp > objcopy
+
+addr2line: $(addr2line_OBJECTS) $(addr2line_DEPENDENCIES)
+ @rm -f addr2line$(EXEEXT)
+ $(LINK) $(addr2line_LDFLAGS) $(addr2line_OBJECTS) $(addr2line_LDADD) $(LIBS)
+ @test -z "$(EXEEXT)" || echo timestamp > addr2line
+
+nm.new: $(nm_new_OBJECTS) $(nm_new_DEPENDENCIES)
+ @rm -f nm.new$(EXEEXT)
+ $(LINK) $(nm_new_LDFLAGS) $(nm_new_OBJECTS) $(nm_new_LDADD) $(LIBS)
+ @test -z "$(EXEEXT)" || echo timestamp > nm.new
+
+strip.new: $(strip_new_OBJECTS) $(strip_new_DEPENDENCIES)
+ @rm -f strip.new$(EXEEXT)
+ $(LINK) $(strip_new_LDFLAGS) $(strip_new_OBJECTS) $(strip_new_LDADD) $(LIBS)
+ @test -z "$(EXEEXT)" || echo timestamp > strip.new
+.y.c:
+ $(SHELL) $(YLWRAP) "$(YACC)" $< y.tab.c $*.c y.tab.h $*.h -- $(YFLAGS)
+.y.h:
+ $(SHELL) $(YLWRAP) "$(YACC)" $< y.tab.c $*.c y.tab.h $*.h -- $(YFLAGS)
+.l.c:
+ $(SHELL) $(YLWRAP) "$(LEX)" $< $(LEX_OUTPUT_ROOT).c $@ -- $(LFLAGS)
+
+binutils.info: binutils.texi
+binutils.dvi: binutils.texi
+
+
+DVIPS = dvips
+
+.texi.info:
+ @rm -f $@ $@-[0-9] $@-[0-9][0-9]
+ $(MAKEINFO) -I $(srcdir) $<
+
+.texi.dvi:
+ TEXINPUTS=$(top_srcdir)/../texinfo:$$TEXINPUTS \
+ MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<
+
+.texi:
+ @rm -f $@ $@-[0-9] $@-[0-9][0-9]
+ $(MAKEINFO) -I $(srcdir) $<
+
+.texinfo.info:
+ @rm -f $@ $@-[0-9] $@-[0-9][0-9]
+ $(MAKEINFO) -I $(srcdir) $<
+
+.texinfo:
+ @rm -f $@ $@-[0-9] $@-[0-9][0-9]
+ $(MAKEINFO) -I $(srcdir) $<
+
+.texinfo.dvi:
+ TEXINPUTS=$(top_srcdir)/../texinfo:$$TEXINPUTS \
+ MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<
+.dvi.ps:
+ $(DVIPS) $< -o $@
+
+install-info-am: $(INFO_DEPS)
+ @$(NORMAL_INSTALL)
+ $(mkinstalldirs) $(infodir)
+ @for file in $(INFO_DEPS); do \
+ if test -f $$file; then d=.; else d=$(srcdir); fi; \
+ for ifile in `cd $$d && echo $$file $$file-[0-9] $$file-[0-9][0-9]`; do \
+ if test -f $$d/$$ifile; then \
+ echo " $(INSTALL_DATA) $$d/$$ifile $(infodir)/$$ifile"; \
+ $(INSTALL_DATA) $$d/$$ifile $(infodir)/$$ifile; \
+ else : ; fi; \
+ done; \
+ done
+ @$(POST_INSTALL)
+ @if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
+ for file in $(INFO_DEPS); do \
+ echo " install-info --info-dir=$(infodir) $(infodir)/$$file";\
+ install-info --info-dir=$(infodir) $(infodir)/$$file || :;\
+ done; \
+ else : ; fi
+
+uninstall-info:
+ $(PRE_UNINSTALL)
+ @if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
+ ii=yes; \
+ else ii=; fi; \
+ for file in $(INFO_DEPS); do \
+ test -z $ii || install-info --info-dir=$(infodir) --remove $$file; \
+ done
+ $(NORMAL_UNINSTALL)
+ for file in $(INFO_DEPS); do \
+ (cd $(infodir) && rm -f $$file $$file-[0-9] $$file-[0-9][0-9]); \
+ done
+
+dist-info: $(INFO_DEPS)
+ for base in $(INFO_DEPS); do \
+ if test -f $$base; then d=.; else d=$(srcdir); fi; \
+ for file in `cd $$d && eval echo $$base*`; do \
+ test -f $(distdir)/$$file \
+ || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+ || cp -p $$d/$$file $(distdir)/$$file; \
+ done; \
+ done
+
+mostlyclean-aminfo:
+ rm -f binutils.aux binutils.cp binutils.cps binutils.dvi binutils.fn \
+ binutils.fns binutils.ky binutils.log binutils.pg \
+ binutils.toc binutils.tp binutils.tps binutils.vr \
+ binutils.vrs binutils.op binutils.tr binutils.cv
+
+clean-aminfo:
+
+distclean-aminfo:
+
+maintainer-clean-aminfo:
+ for i in $(INFO_DEPS); do rm -f `eval echo $$i*`; done
+clean-info: mostlyclean-aminfo
+install-man: $(MANS)
+ $(NORMAL_INSTALL)
+ $(mkinstalldirs) $(mandir)/man1
+ @sect=1; \
+ inst=`echo "ar" | sed '$(transform)'`.1; \
+ if test -f $(srcdir)/ar.1; then file=$(srcdir)/ar.1; \
+ else file=ar.1; fi; \
+ echo " $(INSTALL_DATA) $$file $(mandir)/man$$sect/$$inst"; \
+ $(INSTALL_DATA) $$file $(mandir)/man$$sect/$$inst
+ @sect=1; \
+ inst=`echo "nlmconv" | sed '$(transform)'`.1; \
+ if test -f $(srcdir)/nlmconv.1; then file=$(srcdir)/nlmconv.1; \
+ else file=nlmconv.1; fi; \
+ echo " $(INSTALL_DATA) $$file $(mandir)/man$$sect/$$inst"; \
+ $(INSTALL_DATA) $$file $(mandir)/man$$sect/$$inst
+ @sect=1; \
+ inst=`echo "$(DEMANGLER_PROG)" | sed '$(transform)'`.1; \
+ if test -f $(srcdir)/$(DEMANGLER_PROG).1; then file=$(srcdir)/$(DEMANGLER_PROG).1; \
+ else file=$(DEMANGLER_PROG).1; fi; \
+ echo " $(INSTALL_DATA) $$file $(mandir)/man$$sect/$$inst"; \
+ $(INSTALL_DATA) $$file $(mandir)/man$$sect/$$inst
+ @sect=1; \
+ inst=`echo "nm" | sed '$(transform)'`.1; \
+ if test -f $(srcdir)/nm.1; then file=$(srcdir)/nm.1; \
+ else file=nm.1; fi; \
+ echo " $(INSTALL_DATA) $$file $(mandir)/man$$sect/$$inst"; \
+ $(INSTALL_DATA) $$file $(mandir)/man$$sect/$$inst
+ @sect=1; \
+ inst=`echo "objdump" | sed '$(transform)'`.1; \
+ if test -f $(srcdir)/objdump.1; then file=$(srcdir)/objdump.1; \
+ else file=objdump.1; fi; \
+ echo " $(INSTALL_DATA) $$file $(mandir)/man$$sect/$$inst"; \
+ $(INSTALL_DATA) $$file $(mandir)/man$$sect/$$inst
+ @sect=1; \
+ inst=`echo "ranlib" | sed '$(transform)'`.1; \
+ if test -f $(srcdir)/ranlib.1; then file=$(srcdir)/ranlib.1; \
+ else file=ranlib.1; fi; \
+ echo " $(INSTALL_DATA) $$file $(mandir)/man$$sect/$$inst"; \
+ $(INSTALL_DATA) $$file $(mandir)/man$$sect/$$inst
+ @sect=1; \
+ inst=`echo "size" | sed '$(transform)'`.1; \
+ if test -f $(srcdir)/size.1; then file=$(srcdir)/size.1; \
+ else file=size.1; fi; \
+ echo " $(INSTALL_DATA) $$file $(mandir)/man$$sect/$$inst"; \
+ $(INSTALL_DATA) $$file $(mandir)/man$$sect/$$inst
+ @sect=1; \
+ inst=`echo "strings" | sed '$(transform)'`.1; \
+ if test -f $(srcdir)/strings.1; then file=$(srcdir)/strings.1; \
+ else file=strings.1; fi; \
+ echo " $(INSTALL_DATA) $$file $(mandir)/man$$sect/$$inst"; \
+ $(INSTALL_DATA) $$file $(mandir)/man$$sect/$$inst
+ @sect=1; \
+ inst=`echo "strip" | sed '$(transform)'`.1; \
+ if test -f $(srcdir)/strip.1; then file=$(srcdir)/strip.1; \
+ else file=strip.1; fi; \
+ echo " $(INSTALL_DATA) $$file $(mandir)/man$$sect/$$inst"; \
+ $(INSTALL_DATA) $$file $(mandir)/man$$sect/$$inst
+ @sect=1; \
+ inst=`echo "objcopy" | sed '$(transform)'`.1; \
+ if test -f $(srcdir)/objcopy.1; then file=$(srcdir)/objcopy.1; \
+ else file=objcopy.1; fi; \
+ echo " $(INSTALL_DATA) $$file $(mandir)/man$$sect/$$inst"; \
+ $(INSTALL_DATA) $$file $(mandir)/man$$sect/$$inst
+ @sect=1; \
+ inst=`echo "addr2line" | sed '$(transform)'`.1; \
+ if test -f $(srcdir)/addr2line.1; then file=$(srcdir)/addr2line.1; \
+ else file=addr2line.1; fi; \
+ echo " $(INSTALL_DATA) $$file $(mandir)/man$$sect/$$inst"; \
+ $(INSTALL_DATA) $$file $(mandir)/man$$sect/$$inst
+
+uninstall-man:
+ $(NORMAL_UNINSTALL)
+ inst=`echo "ar" | sed '$(transform)'`.1; \
+ rm -f $(mandir)/man1/$$inst
+ inst=`echo "nlmconv" | sed '$(transform)'`.1; \
+ rm -f $(mandir)/man1/$$inst
+ inst=`echo "$(DEMANGLER_PROG)" | sed '$(transform)'`.1; \
+ rm -f $(mandir)/man1/$$inst
+ inst=`echo "nm" | sed '$(transform)'`.1; \
+ rm -f $(mandir)/man1/$$inst
+ inst=`echo "objdump" | sed '$(transform)'`.1; \
+ rm -f $(mandir)/man1/$$inst
+ inst=`echo "ranlib" | sed '$(transform)'`.1; \
+ rm -f $(mandir)/man1/$$inst
+ inst=`echo "size" | sed '$(transform)'`.1; \
+ rm -f $(mandir)/man1/$$inst
+ inst=`echo "strings" | sed '$(transform)'`.1; \
+ rm -f $(mandir)/man1/$$inst
+ inst=`echo "strip" | sed '$(transform)'`.1; \
+ rm -f $(mandir)/man1/$$inst
+ inst=`echo "objcopy" | sed '$(transform)'`.1; \
+ rm -f $(mandir)/man1/$$inst
+ inst=`echo "addr2line" | sed '$(transform)'`.1; \
+ rm -f $(mandir)/man1/$$inst
+
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES)
+ here=`pwd` && cd $(srcdir) && mkid -f$$here/ID $(SOURCES) $(HEADERS)
+
+TAGS: $(HEADERS) $(SOURCES) config.in $(TAGS_DEPENDENCIES)
+ tags=; \
+ here=`pwd`; \
+ test -z "$(ETAGS_ARGS)config.in$(SOURCES)$(HEADERS)$$tags" \
+ || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags config.in $(SOURCES) $(HEADERS) -o $$here/TAGS)
+
+mostlyclean-tags:
+
+clean-tags:
+
+distclean-tags:
+ rm -f TAGS ID
+
+maintainer-clean-tags:
+
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+
+# This target untars the dist file and tries a VPATH configuration. Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+ rm -rf $(distdir)
+ GZIP=$(GZIP) $(TAR) zxf $(distdir).tar.gz
+ mkdir $(distdir)/=build
+ mkdir $(distdir)/=inst
+ dc_install_base=`cd $(distdir)/=inst && pwd`; \
+ cd $(distdir)/=build \
+ && ../configure --srcdir=.. --prefix=$$dc_install_base \
+ && $(MAKE) \
+ && $(MAKE) dvi \
+ && $(MAKE) check \
+ && $(MAKE) install \
+ && $(MAKE) installcheck \
+ && $(MAKE) dist
+ rm -rf $(distdir)
+ @echo "========================"; \
+ echo "$(distdir).tar.gz is ready for distribution"; \
+ echo "========================"
+dist: distdir
+ -chmod -R a+r $(distdir)
+ GZIP=$(GZIP) $(TAR) chozf $(distdir).tar.gz $(distdir)
+ rm -rf $(distdir)
+dist-all: distdir
+ -chmod -R a+r $(distdir)
+ GZIP=$(GZIP) $(TAR) chozf $(distdir).tar.gz $(distdir)
+ rm -rf $(distdir)
+distdir: $(DISTFILES)
+ rm -rf $(distdir)
+ mkdir $(distdir)
+ -chmod 777 $(distdir)
+ @for file in $(DISTFILES); do \
+ if test -f $$file; then d=.; else d=$(srcdir); fi; \
+ test -f $(distdir)/$$file \
+ || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+ || cp -p $$d/$$file $(distdir)/$$file; \
+ done
+ $(MAKE) top_distdir="$(top_distdir)" distdir="$(distdir)" dist-info
+
+RUNTESTFLAGS =
-dvi: binutils.dvi
+DEJATOOL = $(PACKAGE)
+site.exp: Makefile
+ @echo 'Making a new site.exp file...'
+ -@rm -f site.bak
+ @echo '## these variables are automatically generated by make ##' > $@-t
+ @echo '# Do not edit here. If you wish to override these values' >> $@-t
+ @echo '# edit the last section' >> $@-t
+ @echo 'set tool $(DEJATOOL)' >> $@-t
+ @echo 'set srcdir $(srcdir)' >> $@-t
+ @echo 'set objdir' `pwd` >> $@-t
+ @echo 'set host_alias $(host_alias)' >> $@-t
+ @echo 'set host_triplet $(host_triplet)' >> $@-t
+ @echo 'set target_alias $(target_alias)' >> $@-t
+ @echo 'set target_triplet $(target_triplet)' >> $@-t
+ @echo 'set build_alias $(build_alias)' >> $@-t
+ @echo 'set build_triplet $(build_triplet)' >> $@-t
+ @echo '## All variables above are generated by configure. Do Not Edit ##' >> $@-t
+ -@sed '1,/^## All variables above are.*##/ d' site.bak >> $@-t
+ -@mv site.exp site.bak
+ @mv $@-t site.exp
+info: $(INFO_DEPS)
+dvi: $(DVIS)
+check: all
+ $(MAKE) check-DEJAGNU
+installcheck:
+install-info: install-info-am
+install-exec: install-binPROGRAMS install-exec-local
+ @$(NORMAL_INSTALL)
-$(SIZE_PROG): $(ADDL_DEPS) size.o
- $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(SIZE_PROG) size.o $(ADDL_LIBS) $(EXTRALIBS)
+install-data: install-man
+ @$(NORMAL_INSTALL)
-$(OBJCOPY_PROG): $(ADDL_DEPS) objcopy.o not-strip.o $(WRITE_DEBUG_OBJS)
- $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(OBJCOPY_PROG) objcopy.o not-strip.o $(WRITE_DEBUG_OBJS) $(ADDL_LIBS) $(EXTRALIBS)
+install: install-exec install-data all
+ @:
-$(STRINGS_PROG): $(ADDL_DEPS) strings.o
- $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(STRINGS_PROG) strings.o $(ADDL_LIBS) $(EXTRALIBS)
+uninstall: uninstall-binPROGRAMS uninstall-man
-$(STRIP_PROG): $(ADDL_DEPS) objcopy.o is-strip.o $(WRITE_DEBUG_OBJS)
- $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(STRIP_PROG) objcopy.o is-strip.o $(WRITE_DEBUG_OBJS) $(ADDL_LIBS) $(EXTRALIBS)
+all: Makefile $(PROGRAMS) $(MANS) config.h
-$(NM_PROG): $(ADDL_DEPS) nm.o
- $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(NM_PROG) nm.o $(ADDL_LIBS) $(EXTRALIBS)
+install-strip:
+ $(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' INSTALL_SCRIPT='$(INSTALL_PROGRAM)' install
+installdirs:
+ $(mkinstalldirs) $(bindir) $(mandir)/man1
+
+
+mostlyclean-generic:
+ test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
+
+clean-generic:
+ test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+ rm -f Makefile $(DISTCLEANFILES)
+ rm -f config.cache config.log stamp-h stamp-h[0-9]*
+ test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
+ test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
+mostlyclean: mostlyclean-hdr mostlyclean-binPROGRAMS \
+ mostlyclean-noinstPROGRAMS mostlyclean-compile \
+ mostlyclean-libtool mostlyclean-aminfo mostlyclean-tags \
+ mostlyclean-generic
+
+clean: clean-hdr clean-binPROGRAMS clean-noinstPROGRAMS clean-compile \
+ clean-libtool clean-aminfo clean-tags clean-generic \
+ mostlyclean
+
+distclean: distclean-hdr distclean-binPROGRAMS distclean-noinstPROGRAMS \
+ distclean-compile distclean-libtool distclean-aminfo \
+ distclean-tags distclean-generic clean
+ rm -f config.status
+ rm -f libtool
+
+maintainer-clean: maintainer-clean-hdr maintainer-clean-binPROGRAMS \
+ maintainer-clean-noinstPROGRAMS \
+ maintainer-clean-compile maintainer-clean-libtool \
+ maintainer-clean-aminfo maintainer-clean-tags \
+ maintainer-clean-generic distclean
+ @echo "This command is intended for maintainers to use;"
+ @echo "it deletes files that may require special tools to rebuild."
+ rm -f config.status
+
+.PHONY: default mostlyclean-hdr distclean-hdr clean-hdr \
+maintainer-clean-hdr mostlyclean-binPROGRAMS distclean-binPROGRAMS \
+clean-binPROGRAMS maintainer-clean-binPROGRAMS uninstall-binPROGRAMS \
+install-binPROGRAMS mostlyclean-noinstPROGRAMS distclean-noinstPROGRAMS \
+clean-noinstPROGRAMS maintainer-clean-noinstPROGRAMS \
+mostlyclean-compile distclean-compile clean-compile \
+maintainer-clean-compile mostlyclean-libtool distclean-libtool \
+clean-libtool maintainer-clean-libtool install-info-am uninstall-info \
+mostlyclean-aminfo distclean-aminfo clean-aminfo \
+maintainer-clean-aminfo install-man uninstall-man tags mostlyclean-tags \
+distclean-tags clean-tags maintainer-clean-tags distdir check-DEJAGNU \
+info dvi installcheck install-info install-exec install-data install \
+uninstall all installdirs mostlyclean-generic distclean-generic \
+clean-generic maintainer-clean-generic clean mostlyclean distclean \
+maintainer-clean
+
+
+check-DEJAGNU: site.exp
+ srcdir=`cd $(srcdir) && pwd`; export srcdir; \
+ EXPECT=$(EXPECT); export EXPECT; \
+ if [ -f $(top_builddir)/../expect/expect ]; then \
+ TCL_LIBRARY=`cd $(top_srcdir)/../tcl/library && pwd`; \
+ export TCL_LIBRARY; \
+ fi; \
+ runtest=$(RUNTEST); \
+ if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \
+ $$runtest --tool $(DEJATOOL) --srcdir $${srcdir}/testsuite \
+ CC_FOR_TARGET="$(CC_FOR_TARGET)" \
+ CFLAGS_FOR_TARGET="$(CFLAGS)" $(RUNTESTFLAGS); \
+ else echo "WARNING: could not find \`runtest'" 1>&2; :;\
+ fi
-$(OBJDUMP_PROG): $(ADDL_DEPS) objdump.o prdbg.o $(DEBUG_OBJS) $(OPCODES_DEP)
- $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(OBJDUMP_PROG) objdump.o prdbg.o $(DEBUG_OBJS) $(OPCODES) $(ADDL_LIBS) $(EXTRALIBS)
+installcheck:
+ /bin/sh $(srcdir)/sanity.sh $(bindir)
underscore.c: stamp-under ; @true
@@ -274,57 +902,31 @@ stamp-under: Makefile
touch stamp-under
version.o: version.c Makefile
- $(CC) -DVERSION='"$(VERSION)"' $(ALL_CFLAGS) -c $(srcdir)/version.c
+ $(COMPILE) -c -DVERSION='"$(VERSION)"' $(srcdir)/version.c
bucomm.o: bucomm.c Makefile
- $(CC) -DTARGET='"@target@"' $(ALL_CFLAGS) -c $(srcdir)/bucomm.c
+ $(COMPILE) -c -DTARGET='"@target@"' $(srcdir)/bucomm.c
cplus-dem.o: $(BASEDIR)/libiberty/cplus-dem.c $(INCDIR)/getopt.h
- $(CC) -c -DMAIN -DVERSION='"$(VERSION)"' $(ALL_CFLAGS) $(BASEDIR)/libiberty/cplus-dem.c
-
-$(DEMANGLER_PROG): cplus-dem.o $(LIBIBERTY) underscore.o $(DEMANGLER_PROG).1
- $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(DEMANGLER_PROG) cplus-dem.o $(LIBIBERTY) $(EXTRALIBS) underscore.o
-
-arparse.c: arparse.y
- $(BISON) $(BISONFLAGS) $(srcdir)/arparse.y
- mv -f y.tab.c arparse.c
- mv -f y.tab.h arparse.h
-
-# Separate from arparse.c so that a parallel make doesn't try to build
-# both arparse.c and arparse.h simultaneously.
-arparse.h: arparse.c
-
-arlex.c: arlex.l
- $(LEX) $(LEX_OPTIONS) $(srcdir)/arlex.l
- mv lex.yy.c arlex.c
-
-$(AR_PROG): $(ADDL_DEPS) ar.o arparse.o arlex.o not-ranlib.o arsup.o
- $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(AR_PROG) ar.o arparse.o arlex.o arsup.o not-ranlib.o $(ADDL_LIBS) $(EXTRALIBS)
-
-$(RANLIB_PROG): $(ADDL_DEPS) ar.o is-ranlib.o arparse.o arlex.o arsup.o
- $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(RANLIB_PROG) ar.o arparse.o arlex.o arsup.o is-ranlib.o $(ADDL_LIBS) $(EXTRALIBS)
-
-$(ADDR2LINE_PROG): $(ADDL_DEPS) addr2line.o
- $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(ADDR2LINE_PROG) addr2line.o $(ADDL_LIBS) $(EXTRALIBS)
+ $(COMPILE) -c -DMAIN -DVERSION='"$(VERSION)"' $(BASEDIR)/libiberty/cplus-dem.c
+# The following is commented out for the convertion to automake.
# This rule creates a single binary that switches between ar and ranlib
# by looking at argv[0]. Use this kludge to save some disk space.
# However, you have to install things by hand.
# (That is after 'make install', replace the installed ranlib by a link to ar.)
-
# Alternatively, you can install ranlib.sh as ranlib.
-
-ar_with_ranlib: $(ADDL_DEPS) ar.o maybe-ranlib.o
- $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(AR_PROG) ar.o maybe-ranlib.o $(ADDL_LIBS) $(EXTRALIBS)
- -rm -f $(RANLIB_PROG)
- -ln $(AR_PROG) $(RANLIB_PROG)
-
+# ar_with_ranlib: $(ADDL_DEPS) ar.o maybe-ranlib.o
+# $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(AR_PROG) ar.o maybe-ranlib.o $(ADDL_LIBS) $(EXTRALIBS)
+# -rm -f $(RANLIB_PROG)
+# -ln $(AR_PROG) $(RANLIB_PROG)
+#
# objcopy and strip in one binary that uses argv[0] to decide its action.
-
-objcopy_with_strip: $(ADDL_DEPS) objcopy.o maybe-strip.o
- $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(OBJCOPY_PROG) objcopy.o maybe-strip.o $(ADDL_LIBS) $(EXTRALIBS)
- -rm -f $(STRIP_PROG)
- -ln $(OBJCOPY_PROG) $(STRIP_PROG)
+#
+#objcopy_with_strip: $(ADDL_DEPS) objcopy.o maybe-strip.o
+# $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(OBJCOPY_PROG) objcopy.o maybe-strip.o $(ADDL_LIBS) $(EXTRALIBS)
+# -rm -f $(STRIP_PROG)
+# -ln $(OBJCOPY_PROG) $(STRIP_PROG)
sysroff.c: sysinfo sysroff.info
./sysinfo -c <$(srcdir)/sysroff.info >sysroff.c
@@ -334,22 +936,6 @@ sysroff.c: sysinfo sysroff.info
sysroff.h: sysinfo sysroff.info
./sysinfo -d <$(srcdir)/sysroff.info >sysroff.h
-# Depend upon arparse.c to avoid building both arparse.c and sysinfo.c
-# simultaneously.
-sysinfo.c: sysinfo.y arparse.c
- $(BISON) -tvd $(srcdir)/sysinfo.y
- rm -f sysinfo.c
- mv -f y.tab.c sysinfo.c
- mv -f y.tab.h sysinfo.h
-
-# Separate from sysinfo.c so that a parallel make doesn't try to build
-# both sysinfo.c and sysinfo.h simultaneously.
-sysinfo.h: sysinfo.c
-
-syslex.c : syslex.l
- $(LEX) $(LEX_OPTIONS) $(srcdir)/syslex.l
- mv lex.yy.c syslex.c
-
sysinfo: sysinfo.o syslex.o
$(CC_FOR_BUILD) $(CFLAGS) $(LDFLAGS) -o $@ sysinfo.o syslex.o
@@ -367,67 +953,14 @@ sysinfo.o: sysinfo.c
$(CC_FOR_BUILD) -c -I. $(CFLAGS) $(srcdir)/sysinfo.c ; \
fi
-srconv: srconv.o coffgrok.o $(ADDL_DEPS)
- $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ srconv.o coffgrok.o $(ADDL_LIBS) $(EXTRALIBS)
-
-dlltool: dlltool.o defparse.o deflex.o cplus-dem.o $(ADDL_DEPS)
- $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ dlltool.o defparse.o deflex.o $(ADDL_LIBS) $(EXTRALIBS)
-
-defparse.c:defparse.y
- $(BISON) $(BISONFLAGS) $(srcdir)/defparse.y
- mv -f y.tab.c defparse.c
- mv -f y.tab.h defparse.h
-
-defparse.h: defparse.c
-
-deflex.c:deflex.l
- $(LEX) $(LEX_OPTIONS) $(srcdir)/deflex.l
- mv lex.yy.c deflex.c
-
dlltool.o:dlltool.c
- $(CC) -c @DLLTOOL_DEFS@ $(ALL_CFLAGS) $(srcdir)/dlltool.c
-
-coffdump: coffdump.o coffgrok.o $(ADDL_DEPS)
- $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ coffdump.o coffgrok.o $(ADDL_LIBS) $(EXTRALIBS)
-
-sysdump: sysdump.o $(ADDL_DEPS)
- $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ sysdump.o $(ADDL_LIBS) $(EXTRALIBS)
-
-# Depend upon sysinfo.c to avoid building both nlmheader.c and sysinfo.c
-# simultaneously.
-nlmheader.c: nlmheader.y sysinfo.c
- $(BISON) $(srcdir)/nlmheader.y
- rm -f nlmheader.c
- mv -f y.tab.c nlmheader.c
+ $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/dlltool.c
# coff/sym.h and coff/ecoff.h won't be found by the automatic dependency
# scripts, since they are only included conditionally.
nlmconv.o: nlmconv.c $(INCDIR)/coff/sym.h $(INCDIR)/coff/ecoff.h
ldname=`echo ld | sed '$(program_transform_name)'`; \
- $(CC) -c -DLD_NAME="\"$${ldname}\"" @NLMCONV_DEFS@ $(ALL_CFLAGS) $(srcdir)/nlmconv.c
-
-$(NLMCONV_PROG): nlmconv.o nlmheader.o $(ADDL_DEPS)
- $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ nlmconv.o nlmheader.o $(ADDL_LIBS) $(EXTRALIBS)
-
-WINDRES_OBJS = windres.o resrc.o rescoff.o resbin.o rcparse.o rclex.o
-
-$(WINDRES_PROG): $(WINDRES_OBJS) $(ADDL_DEPS)
- $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ $(WINDRES_OBJS) $(ADDL_LIBS) $(EXTRALIBS)
-
-# Depend upon defparse.c to avoid building both defparse.c and
-# rcparse.c simultaneously.
-rcparse.c: rcparse.y defparse.c
- $(BISON) $(BISONFLAGS) $(srcdir)/rcparse.y
- mv -f y.tab.c rcparse.c
- mv -f y.tab.h rcparse.h
-
-rcparse.h: rcparse.c
-
-# Depend upon deflex.c to avoid building both deflex.c and rclex.c
-# simultaneously.
-rclex.c: rclex.l deflex.c
- $(LEX) $(LEX_OPTIONS) $(srcdir)/rclex.l
- mv lex.yy.c rclex.c
+ $(COMPILE) -c -DLD_NAME="\"$${ldname}\"" @NLMCONV_DEFS@ $(srcdir)/nlmconv.c
# Targets to rebuild dependencies in this Makefile.
# Have to get rid of .dep1 here so that "$?" later includes all of $(CFILES).
@@ -459,225 +992,47 @@ dep-in: .dep
cat .dep >> tmp-Makefile.in
$(SHELL) $(srcdir)/../move-if-change tmp-Makefile.in $(srcdir)/Makefile.in
-.PHONY: dep dep-in
+dep-am: .dep
+ sed -e '/^..DO NOT DELETE THIS LINE/,$$d' < $(srcdir)/Makefile.am > tmp-Makefile.am
+ cat .dep >> tmp-Makefile.am
+ $(SHELL) $(srcdir)/../move-if-change tmp-Makefile.am $(srcdir)/Makefile.am
+
+.PHONY: dep dep-in dep-am
###
# DOCUMENTATION TARGETS
config.texi: Makefile
rm -f config.texi
echo '@set VERSION $(VERSION)' > config.texi
-# TeX output
+
binutils.dvi: $(srcdir)/binutils.texi config.texi
- TEXINPUTS=$(TEXIDIR):$$TEXINPUTS $(TEXI2DVI) $(srcdir)/binutils.texi
-# info file for online browsing
binutils.info: $(srcdir)/binutils.texi config.texi
- $(MAKEINFO) -o binutils.info $(srcdir)/binutils.texi
$(DEMANGLER_PROG).1: cxxfilt.man Makefile
sed -e 's/@PROGRAM@/$(DEMANGLER_PROG)/' < $(srcdir)/cxxfilt.man \
> $(DEMANGLER_PROG).1
-# different targets for -ms, -mm, -me
-# Try to use a recent texi2roff. v2 was put on prep in jan91.
-# If you want an index, see texi2roff doc for postprocessing
-# and add -i to texi2roff invocations below.
-# Workarounds for texi2roff-2 (probably fixed in later texi2roff's, delete
-# corresponding -e lines when later texi2roff's are current)
-# + @ifinfo's deleted explicitly due to texi2roff-2 bug w nested constructs.
-# + @c's deleted explicitly because texi2roff sees texinfo commands in them
-# + @ (that's at-BLANK) not recognized by texi2roff, turned into blank
-# + @alphaenumerate is ridiculously new, turned into @enumerate
-
-# roff output (-ms)
-binutils.ms: $(srcdir)/binutils.texi
- sed -e '/\\input texinfo/d' \
- -e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
- -e '/^@ifinfo/,/^@end ifinfo/d' \
- -e '/^@c/d' \
- -e 's/{.*,,/{/' \
- -e 's/@ / /g' \
- -e 's/^@alphaenumerate/@enumerate/g' \
- -e 's/^@end alphaenumerate/@end enumerate/g' \
- $(srcdir)/binutils.texi | \
- $(TEXI2ROFF) -ms | \
- sed -e 's/---/\\(em/g' \
- >binutils.ms
-
-# roff output (-mm)
-# '@noindent's removed due to texi2roff-2 mm bug; if yours is newer,
-# try leaving them in
-binutils.mm: $(srcdir)/binutils.texi
- sed -e '/\\input texinfo/d' \
- -e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
- -e '/^@ifinfo/,/^@end ifinfo/d' \
- -e '/^@c/d' \
- -e 's/{.*,,/{/' \
- -e '/@noindent/d' \
- -e 's/@ / /g' \
- -e 's/^@alphaenumerate/@enumerate/g' \
- -e 's/^@end alphaenumerate/@end enumerate/g' \
- $(srcdir)/binutils.texi | \
- $(TEXI2ROFF) -mm | \
- sed -e 's/---/\\(em/g' \
- >binutils.mm
-
-# roff output (-me)
-binutils.me: $(srcdir)/binutils.texi
- sed -e '/\\input texinfo/d' \
- -e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
- -e '/^@ifinfo/,/^@end ifinfo/d' \
- -e '/^@c/d' \
- -e 's/{.*,,/{/' \
- -e 's/@ / /g' \
- -e 's/^@alphaenumerate/@enumerate/g' \
- -e 's/^@end alphaenumerate/@end enumerate/g' \
- $(srcdir)/binutils.texi | \
- $(TEXI2ROFF) -me | \
- sed -e 's/---/\\(em/g' \
- >binutils.me
+.PHONY: install-exec-local
-
-###
-
-mostlyclean:
- -rm -f *.o *~ \#* core binutils.?? binutils.??? y.output
- -rm -rf tmpdir
-clean: mostlyclean
- -rm -f $(PROGS) $(DEMANGLER_PROG).1 stamp-under
- -rm -f underscore.c sysroff sysroff.c sysroff.h sysinfo dep.sed
-distclean:
- -rm -f Makefile config.status *.o *~ \#* core y.*
- -rm -f binutils.?? binutils.??? binutils.aux binutils.log binutils.toc
- -rm -f $(PROGS) underscore.c config.h stamp-h config.cache config.log
- -rm -f dep.sed stamp-under $(DEMANGLER_PROG).1 site.bak site.exp
- -rm -f sysroff sysroff.c sysroff.h sysinfo
- -rm -rf tmpdir
-maintainer-clean realclean: clean distclean
- @echo "This command is intended for maintainers to use;"
- @echo "it deletes files that may require special tools to rebuild."
- -rm -f $(DISTSTUFF) binutils.info* TAGS
-
-etags tags: TAGS
-
-TAGS: force
- etags $(INCDIR)/*.h $(srcdir)/*.[hc]
-
-.PHONY: install installdirs
-
-install: all installdirs
- for i in $(PROGS) ; do \
- n=`echo $$i | sed -e 's/.new//' | sed '$(program_transform_name)'`; \
- $(INSTALL_PROGRAM) $$i $(bindir)/$$n; \
- done
- for i in $(MANPAGES) ; do \
- n=`echo $$i | sed '$(program_transform_name)'`; \
- $(INSTALL_DATA) $(srcdir)/$$i.1 $(man1dir)/$$n.1; \
+install-exec-local: $(bin_PROGRAMS) $(noinst_PROGRAMS)
+ @list='$(noinst_PROGRAMS)'; for p in $$list; do \
+ if test -f $$p; then \
+ echo " $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(bindir)/`echo $$p|sed -e 's/.new//'|sed '$(transform)'`$(EXEEXT)"; \
+ $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(bindir)/`echo $$p|sed -e 's/.new//'|sed '$(transform)'`$(EXEEXT); \
+ else :; fi; \
done
- if [ x$(DEMANGLER_PROG) != x ]; then \
- n=`echo $(DEMANGLER_PROG) | sed '$(program_transform_name)'`; \
- $(INSTALL_DATA) $(DEMANGLER_PROG).1 $(man1dir)/$$n.1; \
- fi
for i in $(TOOL_PROGS); do \
if [ -f $$i ]; then \
j=`echo $$i | sed -e 's/.new//'`; \
rm -f $(tooldir)/bin/$$j; \
- k=`echo $$j | sed '$(program_transform_name)'`; \
+ k=`echo $$j | sed '$(transform)'`; \
ln $(bindir)/$$k $(tooldir)/bin/$$j >/dev/null 2>/dev/null \
|| $(INSTALL_PROGRAM) $$i $(tooldir)/bin/$$j; \
else true; \
fi; \
done
-installdirs:
- $(SHELL) $(srcdir)/../mkinstalldirs $(bindir) $(man1dir) $(tooldir)/bin
-
-# This little path search is required because in the FSF net releases,
-# the info files are included in the source tree, and that may not be
-# the same as the build directory.
-install-info: binutils.info
- $(SHELL) $(srcdir)/../mkinstalldirs $(infodir)
- if [ -r binutils.info ]; then \
- dir=. ; \
- else \
- dir=$(srcdir) ; \
- fi ; \
- for i in `cd $$dir; echo binutils.info*` ; do \
- $(INSTALL_DATA) $$dir/$$i $(infodir)/$$i ; \
- done
-
-clean-info:
- -rm -rf *.info*
-
-# Making a dist:
-# cvs rtag binutils-x-yy ld+utils
-# cvs co -r binutils-x-yy ld+utils
-# cd {HERE}; make dist [-f Makefile.in]
-
-dist: $(DIST_NAME).tar.z
-
-diststuff: $(DISTSTUFF) info
-
-$(DIST_NAME).tar.z:
- cd ../..; rm -f $(DIST_NAME); ln -s devo $(DIST_NAME)
- make diststuff -f Makefile.in
- cd ../ld; make diststuff -f Makefile.in
- cd ../gprof; make diststuff -f Makefile.in
- cd ../texinfo; mv texinfo.tex ..; rm -rf *; mv ../texinfo.tex .
- # Take out texinfo from configurable dirs
- mv ../configure.in tmp; \
- sed -e '/^host_tools=/s/texinfo //' <tmp >../configure.in; rm tmp
- cd ..; chmod og=u `find . -print`
- cd ../..; tar chf - $(DIST_NAME) | gzip >$(DIST_NAME).tar.z
- rm -rf ../../$(DIST_NAME)
-
-#-----------------------------------------------------------------------------
-# 'STANDARD' GNU/960 TARGETS BELOW THIS POINT
-#
-# 'VERSION' file must be present and contain a string of the form "x.y"
-#-----------------------------------------------------------------------------
-
-ver960.c: FORCE
- rm -f ver960.c
- echo "char ${TARG}_ver[]= \"${TARG} `cat VERSION`, `date`\";" > ver960.c
-
-
-# Dummy target to force execution of dependent targets.
-#
-force:
-
-# Target to uncomment host-specific lines in this makefile. Such lines must
-# have the following string beginning in column 1: #__<hostname>__#
-# Original Makefile is backed up as 'Makefile.old'.
-#
-# Invoke with: make make HOST=xxx
-#
-make:
- -@if test $(HOST)x = x ; then \
- echo 'Specify "make make HOST=???"'; \
- exit 1; \
- fi ; \
- grep -s "^#The next line was generated by 'make make'" Makefile; \
- if test $$? = 0 ; then \
- echo "Makefile has already been processed with 'make make'";\
- exit 1; \
- fi ; \
- mv -f Makefile Makefile.old; \
- echo "#The next line was generated by 'make make'" >Makefile ; \
- echo "HOST=$(HOST)" >>Makefile ; \
- echo >>Makefile ; \
- sed "s/^#__$(HOST)__#//" < Makefile.old >>Makefile
-
-Makefile: Makefile.in config.status
- CONFIG_FILES=Makefile CONFIG_HEADERS= $(SHELL) ./config.status
-
-config.h: stamp-h ; @true
-stamp-h: config.in config.status
- CONFIG_FILES= CONFIG_HEADERS=config.h:config.in $(SHELL) ./config.status
-
-config.status: configure $(srcdir)/../bfd/configure.host $(srcdir)/../bfd/config.bfd
- $(SHELL) ./config.status --recheck
-
# What appears below is generated by a hacked mkdep using gcc -MM.
# DO NOT DELETE THIS LINE -- mkdep uses it.
@@ -795,3 +1150,7 @@ rclex.o: rclex.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
windres.h rcparse.h
# IF YOU PUT ANYTHING HERE IT WILL GO AWAY
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/binutils/acconfig.h b/binutils/acconfig.h
index 6ae3d76..4a84764 100644
--- a/binutils/acconfig.h
+++ b/binutils/acconfig.h
@@ -1,4 +1,10 @@
+/* Name of package. */
+#undef PACKAGE
+
+/* Version of package. */
+#undef VERSION
+
/* Whether strstr must be declared even if <string.h> is included. */
#undef NEED_DECLARATION_STRSTR
diff --git a/binutils/acinclude.m4 b/binutils/acinclude.m4
new file mode 100644
index 0000000..109c97c
--- /dev/null
+++ b/binutils/acinclude.m4
@@ -0,0 +1 @@
+sinclude(../bfd/acmacros.m4)
diff --git a/binutils/aclocal.m4 b/binutils/aclocal.m4
new file mode 100644
index 0000000..29a3745
--- /dev/null
+++ b/binutils/aclocal.m4
@@ -0,0 +1,295 @@
+dnl aclocal.m4 generated automatically by aclocal 1.2
+
+sinclude(../bfd/acmacros.m4)
+
+# Do all the work for Automake. This macro actually does too much --
+# some checks are only needed if your package does certain things.
+# But this isn't really a big deal.
+
+# serial 1
+
+dnl Usage:
+dnl AM_INIT_AUTOMAKE(package,version, [no-define])
+
+AC_DEFUN(AM_INIT_AUTOMAKE,
+[AC_REQUIRE([AM_PROG_INSTALL])
+PACKAGE=[$1]
+AC_SUBST(PACKAGE)
+VERSION=[$2]
+AC_SUBST(VERSION)
+dnl test to see if srcdir already configured
+if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
+ AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+fi
+ifelse([$3],,
+AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE")
+AC_DEFINE_UNQUOTED(VERSION, "$VERSION"))
+AM_SANITY_CHECK
+AC_ARG_PROGRAM
+dnl FIXME This is truly gross.
+missing_dir=`cd $ac_aux_dir && pwd`
+AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
+AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
+AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
+AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
+AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
+AC_PROG_MAKE_SET])
+
+
+# serial 1
+
+AC_DEFUN(AM_PROG_INSTALL,
+[AC_REQUIRE([AC_PROG_INSTALL])
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
+AC_SUBST(INSTALL_SCRIPT)dnl
+])
+
+#
+# Check to make sure that the build environment is sane.
+#
+
+AC_DEFUN(AM_SANITY_CHECK,
+[AC_MSG_CHECKING([whether build environment is sane])
+# Just in case
+sleep 1
+echo timestamp > conftestfile
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
+ if test "$@" = "X"; then
+ # -L didn't work.
+ set X `ls -t $srcdir/configure conftestfile`
+ fi
+ test "[$]2" = conftestfile
+ )
+then
+ # Ok.
+ :
+else
+ AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+rm -f conftest*
+AC_MSG_RESULT(yes)])
+
+dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
+dnl The program must properly implement --version.
+AC_DEFUN(AM_MISSING_PROG,
+[AC_MSG_CHECKING(for working $2)
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf. Sigh.
+if ($2 --version) < /dev/null > /dev/null 2>&1; then
+ $1=$2
+ AC_MSG_RESULT(found)
+else
+ $1="$3/missing $2"
+ AC_MSG_RESULT(missing)
+fi
+AC_SUBST($1)])
+
+
+# serial 9 AM_PROG_LIBTOOL
+AC_DEFUN(AM_PROG_LIBTOOL,
+[AC_REQUIRE([AC_CANONICAL_HOST])
+AC_REQUIRE([AC_PROG_CC])
+AC_REQUIRE([AC_PROG_RANLIB])
+AC_REQUIRE([AM_PROG_LD])
+AC_REQUIRE([AC_PROG_LN_S])
+
+# Always use our own libtool.
+LIBTOOL='$(top_builddir)/libtool'
+AC_SUBST(LIBTOOL)
+
+dnl Allow the --disable-shared flag to stop us from building shared libs.
+AC_ARG_ENABLE(shared,
+[ --enable-shared build shared libraries [default=yes]],
+test "$enableval" = no && libtool_shared=" --disable-shared",
+libtool_shared=)
+
+dnl Allow the --disable-static flag to stop us from building static libs.
+AC_ARG_ENABLE(static,
+[ --enable-static build static libraries [default=yes]],
+test "$enableval" = no && libtool_static=" --disable-static",
+libtool_static=)
+
+libtool_flags="$libtool_shared$libtool_static"
+test "$silent" = yes && libtool_flags="$libtool_flags --silent"
+test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
+test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+[case "$host" in
+*-*-irix6*)
+ for f in '-32' '-64' '-cckr' '-n32' '-mips1' '-mips2' '-mips3' '-mips4'; do
+ if echo " $CC $CFLAGS " | egrep -e "[ ]$f[ ]" > /dev/null; then
+ LD="${LD-ld} $f"
+ fi
+ done
+ ;;
+
+*-*-sco3.2v5*)
+ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+ CFLAGS="$CFLAGS -belf"
+ ;;
+esac]
+
+# Actually configure libtool. ac_aux_dir is where install-sh is found.
+CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
+LD="$LD" RANLIB="$RANLIB" LN_S="$LN_S" \
+${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig \
+$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
+|| AC_MSG_ERROR([libtool configure failed])
+])
+
+# AM_PROG_LD - find the path to the GNU or non-GNU linker
+AC_DEFUN(AM_PROG_LD,
+[AC_ARG_WITH(gnu-ld,
+[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
+test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
+if test "$with_gnu_ld" = yes; then
+ AC_MSG_CHECKING([for GNU ld])
+else
+ AC_MSG_CHECKING([for non-GNU ld])
+fi
+AC_CACHE_VAL(ac_cv_path_LD,
+[case "$LD" in
+ /*)
+ ac_cv_path_LD="$LD" # Let the user override the test with a path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/ld"; then
+ ac_cv_path_LD="$ac_dir/ld"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some GNU ld's only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU ld|with BFD)' > /dev/null; then
+ test "$with_gnu_ld" = yes && break
+ else
+ test "$with_gnu_ld" != yes && break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac])
+LD="$ac_cv_path_LD"
+if test -n "$LD"; then
+ AC_MSG_RESULT($LD)
+else
+ AC_MSG_RESULT(no)
+fi
+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+AC_SUBST(LD)
+AM_PROG_LD_GNU
+])
+
+AC_DEFUN(AM_PROG_LD_GNU,
+[AC_CACHE_CHECK([whether we are using GNU ld], ac_cv_prog_gnu_ld,
+[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
+if $LD -v 2>&1 </dev/null | egrep '(GNU ld|with BFD)' > /dev/null; then
+ ac_cv_prog_gnu_ld=yes
+else
+ ac_cv_prog_gnu_ld=no
+fi])
+])
+
+# Like AC_CONFIG_HEADER, but automatically create stamp file.
+
+AC_DEFUN(AM_CONFIG_HEADER,
+[AC_PREREQ([2.12])
+AC_CONFIG_HEADER([$1])
+dnl When config.status generates a header, we must update the stamp-h file.
+dnl This file resides in the same directory as the config header
+dnl that is generated. We must strip everything past the first ":",
+dnl and everything past the last "/".
+AC_OUTPUT_COMMANDS(changequote(<<,>>)dnl
+ifelse(patsubst(<<$1>>, <<[^ ]>>, <<>>), <<>>,
+<<test -z "<<$>>CONFIG_HEADERS" || echo timestamp > patsubst(<<$1>>, <<^\([^:]*/\)?.*>>, <<\1>>)stamp-h<<>>dnl>>,
+<<am_indx=1
+for am_file in <<$1>>; do
+ case " <<$>>CONFIG_HEADERS " in
+ *" <<$>>am_file "*<<)>>
+ echo timestamp > `echo <<$>>am_file | sed -e 's%:.*%%' -e 's%[^/]*$%%'`stamp-h$am_indx
+ ;;
+ esac
+ am_indx=`expr "<<$>>am_indx" + 1`
+done<<>>dnl>>)
+changequote([,]))])
+
+# Add --enable-maintainer-mode option to configure.
+# From Jim Meyering
+
+# serial 1
+
+AC_DEFUN(AM_MAINTAINER_MODE,
+[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
+ dnl maintainer-mode is disabled by default
+ AC_ARG_ENABLE(maintainer-mode,
+[ --enable-maintainer-mode enable make rules and dependencies not useful
+ (and sometimes confusing) to the casual installer],
+ USE_MAINTAINER_MODE=$enableval,
+ USE_MAINTAINER_MODE=no)
+ AC_MSG_RESULT($USE_MAINTAINER_MODE)
+ if test $USE_MAINTAINER_MODE = yes; then
+ MAINT=
+ else
+ MAINT='#M#'
+ fi
+ AC_SUBST(MAINT)dnl
+]
+)
+
+# Check to see if we're running under Cygwin32, without using
+# AC_CANONICAL_*. If so, set output variable CYGWIN32 to "yes".
+# Otherwise set it to "no".
+
+dnl AM_CYGWIN32()
+dnl You might think we can do this by checking for a cygwin32-specific
+dnl cpp define.
+AC_DEFUN(AM_CYGWIN32,
+[AC_CACHE_CHECK(for Cygwin32 environment, am_cv_cygwin32,
+[AC_TRY_COMPILE(,[int main () { return __CYGWIN32__; }],
+am_cv_cygwin32=yes, am_cv_cygwin32=no)
+rm -f conftest*])
+CYGWIN32=
+test "$am_cv_cygwin32" = yes && CYGWIN32=yes])
+
+# Check to see if we're running under Win32, without using
+# AC_CANONICAL_*. If so, set output variable EXEEXT to ".exe".
+# Otherwise set it to "".
+
+dnl AM_EXEEXT()
+dnl This knows we add .exe if we're building in the Cygwin32
+dnl environment. But if we're not, then it compiles a test program
+dnl to see if there is a suffix for executables.
+AC_DEFUN(AM_EXEEXT,
+dnl AC_REQUIRE([AC_PROG_CC])AC_REQUIRE([AM_CYGWIN32])
+AC_MSG_CHECKING([for executable suffix])
+[AC_CACHE_VAL(am_cv_exeext,
+[if test "$CYGWIN32" = yes; then
+am_cv_exeext=.exe
+else
+cat > am_c_test.c << 'EOF'
+int main() {
+/* Nothing needed here */
+}
+EOF
+${CC-cc} -o am_c_test $CFLAGS $CPPFLAGS $LDFLAGS am_c_test.c $LIBS 1>&5
+am_cv_exeext=`ls am_c_test.* | grep -v am_c_test.c | sed -e s/am_c_test//`
+rm -f am_c_test*])
+test x"${am_cv_exeext}" = x && am_cv_exeext=no
+fi
+EXEEXT=""
+test x"${am_cv_exeext}" != xno && EXEEXT=${am_cv_exeext}
+AC_MSG_RESULT(${am_cv_exeext})
+AC_SUBST(EXEEXT)])
+
diff --git a/binutils/config.in b/binutils/config.in
index 1ff3760..f22d34d 100644
--- a/binutils/config.in
+++ b/binutils/config.in
@@ -1,5 +1,63 @@
/* config.in. Generated automatically from configure.in by autoheader. */
+/* Name of package. */
+#undef PACKAGE
+
+/* Version of package. */
+#undef VERSION
+
+/* Whether strstr must be declared even if <string.h> is included. */
+#undef NEED_DECLARATION_STRSTR
+
+/* Whether fprintf must be declared even if <stdio.h> is included. */
+#undef NEED_DECLARATION_FPRINTF
+
+/* Whether sbrk must be declared even if <unistd.h> is included. */
+#undef NEED_DECLARATION_SBRK
+
+/* Whether getenv must be declared even if <stdlib.h> is included. */
+#undef NEED_DECLARATION_GETENV
+
+/* Define if using alloca.c. */
+#undef C_ALLOCA
+
+/* Define to one of _getb67, GETB67, getb67 for Cray-2 and Cray-YMP systems.
+ This function is required for alloca.c support on those systems. */
+#undef CRAY_STACKSEG_END
+
+/* Define if you have alloca, as a function or macro. */
+#undef HAVE_ALLOCA
+
+/* Define if you have <alloca.h> and it should be used (not on Ultrix). */
+#undef HAVE_ALLOCA_H
+
+/* Define if you have <sys/wait.h> that is POSIX.1 compatible. */
+#undef HAVE_SYS_WAIT_H
+
+/* Define if you have <vfork.h>. */
+#undef HAVE_VFORK_H
+
+/* Define to `int' if <sys/types.h> doesn't define. */
+#undef pid_t
+
+/* If using the C implementation of alloca, define if you know the
+ direction of stack growth for your system; otherwise it will be
+ automatically deduced at run-time.
+ STACK_DIRECTION > 0 => grows toward higher addresses
+ STACK_DIRECTION < 0 => grows toward lower addresses
+ STACK_DIRECTION = 0 => direction of growth unknown
+ */
+#undef STACK_DIRECTION
+
+/* Define if you have the ANSI C header files. */
+#undef STDC_HEADERS
+
+/* Define vfork as fork if vfork does not work. */
+#undef vfork
+
+/* Define if lex declares yytext as a char * by default, not a char[]. */
+#undef YYTEXT_POINTER
+
/* Is the type time_t defined in <time.h>? */
#undef HAVE_TIME_T_IN_TIME_H
@@ -9,9 +67,6 @@
/* Does <utime.h> define struct utimbuf? */
#undef HAVE_GOOD_UTIME_H
-/* Whether fprintf must be declared even if <stdio.h> is included. */
-#undef NEED_DECLARATION_FPRINTF
-
/* Do we need to use the b modifier when opening binary files? */
#undef USE_BINARY_FOPEN
diff --git a/binutils/configure b/binutils/configure
index 57ba36e..638c903 100755
--- a/binutils/configure
+++ b/binutils/configure
@@ -12,11 +12,18 @@ ac_help=
ac_default_prefix=/usr/local
# Any additions from configure.in:
ac_help="$ac_help
- --enable-targets alternative target configurations"
+ --with-gnu-ld assume the C compiler uses GNU ld [default=no]"
+ac_help="$ac_help
+ --enable-shared build shared libraries [default=yes]"
+ac_help="$ac_help
+ --enable-static build static libraries [default=yes]"
ac_help="$ac_help
- --enable-shared build shared BFD library"
+ --enable-targets alternative target configurations"
ac_help="$ac_help
--enable-commonbfdlib build shared BFD/opcodes/libiberty library"
+ac_help="$ac_help
+ --enable-maintainer-mode enable make rules and dependencies not useful
+ (and sometimes confusing) to the casual installer"
# Initialize some variables set by options.
# The variables have the same names as the options, with
@@ -525,43 +532,8 @@ fi
-# Check whether --enable-targets or --disable-targets was given.
-if test "${enable_targets+set}" = set; then
- enableval="$enable_targets"
- case "${enableval}" in
- yes | "") { echo "configure: error: enable-targets option must specify target names or 'all'" 1>&2; exit 1; }
- ;;
- no) enable_targets= ;;
- *) enable_targets=$enableval ;;
-esac
-fi
-# Check whether --enable-shared or --disable-shared was given.
-if test "${enable_shared+set}" = set; then
- enableval="$enable_shared"
- case "${enableval}" in
- yes) shared=true shared_bfd=true shared_opcodes=true ;;
- no) shared=false ;;
- *bfd*opcodes*) shared=true shared_bfd=true shared_opcodes=true ;;
- *opcodes*bfd*) shared=true shared_bfd=true shared_opcodes=true ;;
- *bfd*) shared=true shared_bfd=true ;;
- *opcodes*) shared=true shared_opcodes=true ;;
- *) shared=false ;;
-esac
-fi
-# Check whether --enable-commonbfdlib or --disable-commonbfdlib was given.
-if test "${enable_commonbfdlib+set}" = set; then
- enableval="$enable_commonbfdlib"
- case "${enableval}" in
- yes) commonbfdlib=true ;;
- no) commonbfdlib=false ;;
- *) { echo "configure: error: bad value ${enableval} for BFD commonbfdlib option" 1>&2; exit 1; } ;;
-esac
-fi
-
-
-
ac_aux_dir=
-for ac_dir in `cd $srcdir/..; pwd` $srcdir/`cd $srcdir/..; pwd`; do
+for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
if test -f $ac_dir/install-sh; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install-sh -c"
@@ -573,7 +545,7 @@ for ac_dir in `cd $srcdir/..; pwd` $srcdir/`cd $srcdir/..; pwd`; do
fi
done
if test -z "$ac_aux_dir"; then
- { echo "configure: error: can not find install-sh or install.sh in `cd $srcdir/..; pwd` $srcdir/`cd $srcdir/..; pwd`" 1>&2; exit 1; }
+ { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
fi
ac_config_guess=$ac_aux_dir/config.guess
ac_config_sub=$ac_aux_dir/config.sub
@@ -607,7 +579,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:611: checking host system type" >&5
+echo "configure:583: checking host system type" >&5
host_alias=$host
case "$host_alias" in
@@ -628,7 +600,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:632: checking target system type" >&5
+echo "configure:604: checking target system type" >&5
target_alias=$target
case "$target_alias" in
@@ -646,7 +618,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:650: checking build system type" >&5
+echo "configure:622: checking build system type" >&5
build_alias=$build
case "$build_alias" in
@@ -668,12 +640,113 @@ test "$host_alias" != "$target_alias" &&
NONENONEs,x,x, &&
program_prefix=${target_alias}-
-if test -z "$target" ; then
- { echo "configure: error: Unrecognized target system type; please check config.sub." 1>&2; exit 1; }
+
+# Find a good install program. We prefer a C program (faster),
+# so one script is as good as another. But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# ./install, which can be erroneously created by make from ./install.sh.
+echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
+echo "configure:656: checking for a BSD compatible install" >&5
+if test -z "$INSTALL"; then
+if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="${IFS}:"
+ for ac_dir in $PATH; do
+ # Account for people who put trailing slashes in PATH elements.
+ case "$ac_dir/" in
+ /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ for ac_prog in ginstall installbsd scoinst install; do
+ if test -f $ac_dir/$ac_prog; then
+ if test $ac_prog = install &&
+ grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ # OSF/1 installbsd also uses dspmsg, but is usable.
+ :
+ else
+ ac_cv_path_install="$ac_dir/$ac_prog -c"
+ break 2
+ fi
+ fi
+ done
+ ;;
+ esac
+ done
+ IFS="$ac_save_IFS"
+
fi
-if test -z "$host" ; then
- { echo "configure: error: Unrecognized host system type; please check config.sub." 1>&2; exit 1; }
+ if test "${ac_cv_path_install+set}" = set; then
+ INSTALL="$ac_cv_path_install"
+ else
+ # As a last resort, use the slow shell script. We don't cache a
+ # path for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the path is relative.
+ INSTALL="$ac_install_sh"
+ fi
fi
+echo "$ac_t""$INSTALL" 1>&6
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
+
+
+PACKAGE=binutils
+
+VERSION=2.8.2
+
+if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
+ { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
+fi
+cat >> confdefs.h <<EOF
+#define PACKAGE "$PACKAGE"
+EOF
+
+cat >> confdefs.h <<EOF
+#define VERSION "$VERSION"
+EOF
+
+echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
+echo "configure:725: checking whether build environment is sane" >&5
+# Just in case
+sleep 1
+echo timestamp > conftestfile
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
+ if test "" = "X"; then
+ # -L didn't work.
+ set X `ls -t $srcdir/configure conftestfile`
+ fi
+ test "$2" = conftestfile
+ )
+then
+ # Ok.
+ :
+else
+ { echo "configure: error: newly created file is older than distributed files!
+Check your system clock" 1>&2; exit 1; }
+fi
+rm -f conftest*
+echo "$ac_t""yes" 1>&6
if test "$program_transform_name" = s,x,x,; then
program_transform_name=
else
@@ -693,18 +766,104 @@ test "$program_suffix" != NONE &&
# sed with no file args requires a program.
test "$program_transform_name" = "" && program_transform_name="s,x,x,"
+missing_dir=`cd $ac_aux_dir && pwd`
+echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
+echo "configure:772: checking for working aclocal" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf. Sigh.
+if (aclocal --version) < /dev/null > /dev/null 2>&1; then
+ ACLOCAL=aclocal
+ echo "$ac_t""found" 1>&6
+else
+ ACLOCAL="$missing_dir/missing aclocal"
+ echo "$ac_t""missing" 1>&6
+fi
+
+echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
+echo "configure:785: checking for working autoconf" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf. Sigh.
+if (autoconf --version) < /dev/null > /dev/null 2>&1; then
+ AUTOCONF=autoconf
+ echo "$ac_t""found" 1>&6
+else
+ AUTOCONF="$missing_dir/missing autoconf"
+ echo "$ac_t""missing" 1>&6
+fi
+
+echo $ac_n "checking for working automake""... $ac_c" 1>&6
+echo "configure:798: checking for working automake" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf. Sigh.
+if (automake --version) < /dev/null > /dev/null 2>&1; then
+ AUTOMAKE=automake
+ echo "$ac_t""found" 1>&6
+else
+ AUTOMAKE="$missing_dir/missing automake"
+ echo "$ac_t""missing" 1>&6
+fi
+
+echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
+echo "configure:811: checking for working autoheader" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf. Sigh.
+if (autoheader --version) < /dev/null > /dev/null 2>&1; then
+ AUTOHEADER=autoheader
+ echo "$ac_t""found" 1>&6
+else
+ AUTOHEADER="$missing_dir/missing autoheader"
+ echo "$ac_t""missing" 1>&6
+fi
+
+echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
+echo "configure:824: checking for working makeinfo" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf. Sigh.
+if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
+ MAKEINFO=makeinfo
+ echo "$ac_t""found" 1>&6
+else
+ MAKEINFO="$missing_dir/missing makeinfo"
+ echo "$ac_t""missing" 1>&6
+fi
+
+echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
+echo "configure:837: checking whether ${MAKE-make} sets \${MAKE}" >&5
+set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftestmake <<\EOF
+all:
+ @echo 'ac_maketemp="${MAKE}"'
+EOF
+# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
+if test -n "$ac_maketemp"; then
+ eval ac_cv_prog_make_${ac_make}_set=yes
+else
+ eval ac_cv_prog_make_${ac_make}_set=no
+fi
+rm -f conftestmake
+fi
+if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ SET_MAKE=
+else
+ echo "$ac_t""no" 1>&6
+ SET_MAKE="MAKE=${MAKE-make}"
+fi
-# host-specific stuff:
-
-HDEFINES=
-HLDFLAGS=
-HLDENV=
-RPATH_ENVVAR=LD_LIBRARY_PATH
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:708: checking for $ac_word" >&5
+echo "configure:867: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -733,7 +892,7 @@ if test -z "$CC"; then
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:737: checking for $ac_word" >&5
+echo "configure:896: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -781,7 +940,7 @@ fi
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:785: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:944: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
@@ -791,11 +950,11 @@ ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS
cross_compiling=$ac_cv_prog_cc_cross
cat > conftest.$ac_ext <<EOF
-#line 795 "configure"
+#line 954 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:799: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:958: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
@@ -815,12 +974,12 @@ if test $ac_cv_prog_cc_works = no; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:819: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:978: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:824: checking whether we are using GNU C" >&5
+echo "configure:983: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -829,7 +988,7 @@ else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:833: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:992: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
@@ -844,7 +1003,7 @@ if test $ac_cv_prog_gcc = yes; then
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:848: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1007: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -871,19 +1030,10 @@ else
test "${CFLAGS+set}" = set || CFLAGS="-g"
fi
-
-. ${srcdir}/../bfd/configure.host
-
-
-
-
-
-AR=${AR-ar}
-
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:887: checking for $ac_word" >&5
+echo "configure:1037: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -909,127 +1059,486 @@ else
echo "$ac_t""no" 1>&6
fi
-# Find a good install program. We prefer a C program (faster),
-# so one script is as good as another. But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:924: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
+# Check whether --with-gnu-ld or --without-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then
+ withval="$with_gnu_ld"
+ test "$withval" = no || with_gnu_ld=yes
+else
+ with_gnu_ld=no
+fi
+
+if test "$with_gnu_ld" = yes; then
+ echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
+echo "configure:1073: checking for GNU ld" >&5
+else
+ echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
+echo "configure:1076: checking for non-GNU ld" >&5
+fi
+if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="${IFS}:"
+ case "$LD" in
+ /*)
+ ac_cv_path_LD="$LD" # Let the user override the test with a path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
for ac_dir in $PATH; do
- # Account for people who put trailing slashes in PATH elements.
- case "$ac_dir/" in
- /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
- *)
- # OSF1 and SCO ODT 3.0 have their own names for install.
- for ac_prog in ginstall installbsd scoinst install; do
- if test -f $ac_dir/$ac_prog; then
- if test $ac_prog = install &&
- grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
- # AIX install. It has an incompatible calling convention.
- # OSF/1 installbsd also uses dspmsg, but is usable.
- :
- else
- ac_cv_path_install="$ac_dir/$ac_prog -c"
- break 2
- fi
- fi
- done
- ;;
- esac
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/ld"; then
+ ac_cv_path_LD="$ac_dir/ld"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some GNU ld's only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU ld|with BFD)' > /dev/null; then
+ test "$with_gnu_ld" = yes && break
+ else
+ test "$with_gnu_ld" != yes && break
+ fi
+ fi
done
- IFS="$ac_save_IFS"
+ IFS="$ac_save_ifs"
+ ;;
+esac
+fi
+LD="$ac_cv_path_LD"
+if test -n "$LD"; then
+ echo "$ac_t""$LD" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
+
+echo $ac_n "checking whether we are using GNU ld""... $ac_c" 1>&6
+echo "configure:1115: checking whether we are using GNU ld" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ # I'd rather use --version here, but apparently some GNU ld's only accept -v.
+if $LD -v 2>&1 </dev/null | egrep '(GNU ld|with BFD)' > /dev/null; then
+ ac_cv_prog_gnu_ld=yes
+else
+ ac_cv_prog_gnu_ld=no
fi
- if test "${ac_cv_path_install+set}" = set; then
- INSTALL="$ac_cv_path_install"
- else
- # As a last resort, use the slow shell script. We don't cache a
- # path for INSTALL within a source directory, because that will
- # break other packages using the cache if that directory is
- # removed, or if the path is relative.
- INSTALL="$ac_install_sh"
- fi
fi
-echo "$ac_t""$INSTALL" 1>&6
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+echo "$ac_t""$ac_cv_prog_gnu_ld" 1>&6
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
+echo "configure:1131: checking whether ln -s works" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ rm -f conftestdata
+if ln -s X conftestdata 2>/dev/null
+then
+ rm -f conftestdata
+ ac_cv_prog_LN_S="ln -s"
+else
+ ac_cv_prog_LN_S=ln
+fi
+fi
+LN_S="$ac_cv_prog_LN_S"
+if test "$ac_cv_prog_LN_S" = "ln -s"; then
+ echo "$ac_t""yes" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
-# For most hosts we can use a simple definition to pick up the BFD and
-# opcodes libraries. However, if we are building shared libraries, we
-# need to handle some hosts specially.
-BFDLIB='-L../bfd -lbfd'
-OPCODES='-L../opcodes -lopcodes'
-case "${host}" in
-*-*-sunos*)
- # On SunOS, we must link against the name we are going to install,
- # not -lbfd, since SunOS does not support SONAME.
- if test "${shared_bfd}" = "true"; then
- BFDLIB='-L../bfd -l`echo bfd | sed '"'"'$(program_transform_name)'"'"'`'
- fi
- if test "${shared_opcodes}" = "true"; then
- OPCODES='-L../opcodes -l`echo opcodes | sed '"'"'$(program_transform_name)'"'"'`'
- fi
+
+
+
+
+
+# Always use our own libtool.
+LIBTOOL='$(top_builddir)/libtool'
+
+
+# Check whether --enable-shared or --disable-shared was given.
+if test "${enable_shared+set}" = set; then
+ enableval="$enable_shared"
+ test "$enableval" = no && libtool_shared=" --disable-shared"
+else
+ libtool_shared=
+fi
+
+
+# Check whether --enable-static or --disable-static was given.
+if test "${enable_static+set}" = set; then
+ enableval="$enable_static"
+ test "$enableval" = no && libtool_static=" --disable-static"
+else
+ libtool_static=
+fi
+
+
+libtool_flags="$libtool_shared$libtool_static"
+test "$silent" = yes && libtool_flags="$libtool_flags --silent"
+test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
+test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case "$host" in
+*-*-irix6*)
+ for f in '-32' '-64' '-cckr' '-n32' '-mips1' '-mips2' '-mips3' '-mips4'; do
+ if echo " $CC $CFLAGS " | egrep -e "[ ]$f[ ]" > /dev/null; then
+ LD="${LD-ld} $f"
+ fi
+ done
;;
-alpha*-*-osf*)
- # On Alpha OSF/1, the native linker searches all the -L
- # directories for any LIB.so files, and only then searches for any
- # LIB.a files. That means that if there is an installed
- # libbfd.so, but this build is not done with --enable-shared, the
- # link will wind up being against the install libbfd.so rather
- # than the newly built libbfd. To avoid this, we must explicitly
- # link against libbfd.a when --enable-shared is not used.
- if test "${shared_bfd}" != "true"; then
- BFDLIB='../bfd/libbfd.a'
- fi
- if test "${shared_opcodes}" != "true"; then
- OPCODES='../opcodes/libopcodes.a'
- fi
+
+*-*-sco3.2v5*)
+ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+ CFLAGS="$CFLAGS -belf"
;;
esac
-if test "${commonbfdlib}" = "true"; then
- # when a shared libbfd is built with --enable-commonbfdlib,
- # all of libopcodes is available in libbfd.so. Unfortunately, on
- # HP/UX, when using gcc -g, the linker does a static link, so we
- # need to continue linking against opcodes on that platform.
- case "${host}" in
- *-*-hpux*) ;;
- *) OPCODES= ;;
- esac
+# Actually configure libtool. ac_aux_dir is where install-sh is found.
+CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
+LD="$LD" RANLIB="$RANLIB" LN_S="$LN_S" \
+${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig \
+$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
+|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
+
+
+# Check whether --enable-targets or --disable-targets was given.
+if test "${enable_targets+set}" = set; then
+ enableval="$enable_targets"
+ case "${enableval}" in
+ yes | "") { echo "configure: error: enable-targets option must specify target names or 'all'" 1>&2; exit 1; }
+ ;;
+ no) enable_targets= ;;
+ *) enable_targets=$enableval ;;
+esac
+fi
+# Check whether --enable-commonbfdlib or --disable-commonbfdlib was given.
+if test "${enable_commonbfdlib+set}" = set; then
+ enableval="$enable_commonbfdlib"
+ case "${enableval}" in
+ yes) commonbfdlib=true ;;
+ no) commonbfdlib=false ;;
+ *) { echo "configure: error: bad value ${enableval} for BFD commonbfdlib option" 1>&2; exit 1; } ;;
+esac
fi
-# Put a plausible default for CC_FOR_BUILD in Makefile.
-if test -z "$CC_FOR_BUILD"; then
- if test "x$cross_compiling" = "xno"; then
- CC_FOR_BUILD='$(CC)'
+
+if test -z "$target" ; then
+ { echo "configure: error: Unrecognized target system type; please check config.sub." 1>&2; exit 1; }
+fi
+if test -z "$host" ; then
+ { echo "configure: error: Unrecognized host system type; please check config.sub." 1>&2; exit 1; }
+fi
+if test "$program_transform_name" = s,x,x,; then
+ program_transform_name=
+else
+ # Double any \ or $. echo might interpret backslashes.
+ cat <<\EOF_SED > conftestsed
+s,\\,\\\\,g; s,\$,$$,g
+EOF_SED
+ program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
+ rm -f conftestsed
+fi
+test "$program_prefix" != NONE &&
+ program_transform_name="s,^,${program_prefix},; $program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+ program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
+
+# sed with no file args requires a program.
+test "$program_transform_name" = "" && program_transform_name="s,x,x,"
+
+
+# Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1262: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_CC="gcc"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+ echo "$ac_t""$CC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+if test -z "$CC"; then
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1291: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ ac_prog_rejected=no
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
+ ac_prog_rejected=yes
+ continue
+ fi
+ ac_cv_prog_CC="cc"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+if test $ac_prog_rejected = yes; then
+ # We found a bogon in the path, so make sure we never use it.
+ set dummy $ac_cv_prog_CC
+ shift
+ if test $# -gt 0; then
+ # We chose a different compiler from the bogus one.
+ # However, it has the same basename, so the bogon will be chosen
+ # first if we set CC to just the basename; use the full file name.
+ shift
+ set dummy "$ac_dir/$ac_word" "$@"
+ shift
+ ac_cv_prog_CC="$@"
+ fi
+fi
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+ echo "$ac_t""$CC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
+echo "configure:1339: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+cat > conftest.$ac_ext <<EOF
+#line 1349 "configure"
+#include "confdefs.h"
+main(){return(0);}
+EOF
+if { (eval echo configure:1353: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+ ac_cv_prog_cc_works=yes
+ # If we can't run a trivial program, we are probably using a cross compiler.
+ if (./conftest; exit) 2>/dev/null; then
+ ac_cv_prog_cc_cross=no
else
- CC_FOR_BUILD=gcc
+ ac_cv_prog_cc_cross=yes
+ fi
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ ac_cv_prog_cc_works=no
+fi
+rm -fr conftest*
+
+echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
+if test $ac_cv_prog_cc_works = no; then
+ { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
+fi
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
+echo "configure:1373: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
+cross_compiling=$ac_cv_prog_cc_cross
+
+echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
+echo "configure:1378: checking whether we are using GNU C" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.c <<EOF
+#ifdef __GNUC__
+ yes;
+#endif
+EOF
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1387: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+ ac_cv_prog_gcc=yes
+else
+ ac_cv_prog_gcc=no
+fi
+fi
+
+echo "$ac_t""$ac_cv_prog_gcc" 1>&6
+
+if test $ac_cv_prog_gcc = yes; then
+ GCC=yes
+ ac_test_CFLAGS="${CFLAGS+set}"
+ ac_save_CFLAGS="$CFLAGS"
+ CFLAGS=
+ echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
+echo "configure:1402: checking whether ${CC-cc} accepts -g" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ echo 'void f(){}' > conftest.c
+if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
+ ac_cv_prog_cc_g=yes
+else
+ ac_cv_prog_cc_g=no
+fi
+rm -f conftest*
+
+fi
+
+echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
+ if test "$ac_test_CFLAGS" = set; then
+ CFLAGS="$ac_save_CFLAGS"
+ elif test $ac_cv_prog_cc_g = yes; then
+ CFLAGS="-g -O2"
+ else
+ CFLAGS="-O2"
fi
+else
+ GCC=
+ test "${CFLAGS+set}" = set || CFLAGS="-g"
+fi
+
+
+for ac_prog in 'bison -y' byacc
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1435: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$YACC"; then
+ ac_cv_prog_YACC="$YACC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_YACC="$ac_prog"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+YACC="$ac_cv_prog_YACC"
+if test -n "$YACC"; then
+ echo "$ac_t""$YACC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
fi
+test -n "$YACC" && break
+done
+test -n "$YACC" || YACC="yacc"
+
+# Extract the first word of "flex", so it can be a program name with args.
+set dummy flex; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1467: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$LEX"; then
+ ac_cv_prog_LEX="$LEX" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_LEX="flex"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_LEX" && ac_cv_prog_LEX="lex"
+fi
+fi
+LEX="$ac_cv_prog_LEX"
+if test -n "$LEX"; then
+ echo "$ac_t""$LEX" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+if test -z "$LEXLIB"
+then
+ case "$LEX" in
+ flex*) ac_lib=fl ;;
+ *) ac_lib=l ;;
+ esac
+ echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6
+echo "configure:1500: checking for yywrap in -l$ac_lib" >&5
+ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-l$ac_lib $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 1508 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char yywrap();
+
+int main() {
+yywrap()
+; return 0; }
+EOF
+if { (eval echo configure:1519: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ LEXLIB="-l$ac_lib"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1033: checking how to run the C preprocessor" >&5
+echo "configure:1542: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
@@ -1044,13 +1553,13 @@ else
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 1048 "configure"
+#line 1557 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1054: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1563: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
:
@@ -1061,13 +1570,13 @@ else
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 1065 "configure"
+#line 1574 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1071: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1580: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
:
@@ -1089,21 +1598,208 @@ else
fi
echo "$ac_t""$CPP" 1>&6
+echo $ac_n "checking lex output file root""... $ac_c" 1>&6
+echo "configure:1603: checking lex output file root" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_lex_root'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ # The minimal lex program is just a single line: %%. But some broken lexes
+# (Solaris, I think it was) want two %% lines, so accommodate them.
+echo '%%
+%%' | $LEX
+if test -f lex.yy.c; then
+ ac_cv_prog_lex_root=lex.yy
+elif test -f lexyy.c; then
+ ac_cv_prog_lex_root=lexyy
+else
+ { echo "configure: error: cannot find output from $LEX; giving up" 1>&2; exit 1; }
+fi
+fi
+
+echo "$ac_t""$ac_cv_prog_lex_root" 1>&6
+LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root
+
+echo $ac_n "checking whether yytext is a pointer""... $ac_c" 1>&6
+echo "configure:1624: checking whether yytext is a pointer" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_lex_yytext_pointer'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ # POSIX says lex can declare yytext either as a pointer or an array; the
+# default is implementation-dependent. Figure out which it is, since
+# not all implementations provide the %pointer and %array declarations.
+ac_cv_prog_lex_yytext_pointer=no
+echo 'extern char *yytext;' >>$LEX_OUTPUT_ROOT.c
+ac_save_LIBS="$LIBS"
+LIBS="$LIBS $LEXLIB"
+cat > conftest.$ac_ext <<EOF
+#line 1636 "configure"
+#include "confdefs.h"
+`cat $LEX_OUTPUT_ROOT.c`
+int main() {
+
+; return 0; }
+EOF
+if { (eval echo configure:1643: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+ rm -rf conftest*
+ ac_cv_prog_lex_yytext_pointer=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+rm -f "${LEX_OUTPUT_ROOT}.c"
+
+fi
+
+echo "$ac_t""$ac_cv_prog_lex_yytext_pointer" 1>&6
+if test $ac_cv_prog_lex_yytext_pointer = yes; then
+ cat >> confdefs.h <<\EOF
+#define YYTEXT_POINTER 1
+EOF
+
+fi
+
+
+echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
+echo "configure:1666: checking whether to enable maintainer-specific portions of Makefiles" >&5
+ # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
+if test "${enable_maintainer_mode+set}" = set; then
+ enableval="$enable_maintainer_mode"
+ USE_MAINTAINER_MODE=$enableval
+else
+ USE_MAINTAINER_MODE=no
+fi
+
+ echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
+ if test $USE_MAINTAINER_MODE = yes; then
+ MAINT=
+ else
+ MAINT='#M#'
+ fi
+
+
+echo $ac_n "checking for Cygwin32 environment""... $ac_c" 1>&6
+echo "configure:1684: checking for Cygwin32 environment" >&5
+if eval "test \"`echo '$''{'am_cv_cygwin32'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 1689 "configure"
+#include "confdefs.h"
+
+int main() {
+int main () { return __CYGWIN32__; }
+; return 0; }
+EOF
+if { (eval echo configure:1696: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ am_cv_cygwin32=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ am_cv_cygwin32=no
+fi
+rm -f conftest*
+rm -f conftest*
+fi
+
+echo "$ac_t""$am_cv_cygwin32" 1>&6
+CYGWIN32=
+test "$am_cv_cygwin32" = yes && CYGWIN32=yes
+echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
+echo "configure:1713: checking for executable suffix" >&5
+if eval "test \"`echo '$''{'am_cv_exeext'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "$CYGWIN32" = yes; then
+am_cv_exeext=.exe
+else
+cat > am_c_test.c << 'EOF'
+int main() {
+/* Nothing needed here */
+}
+EOF
+${CC-cc} -o am_c_test $CFLAGS $CPPFLAGS $LDFLAGS am_c_test.c $LIBS 1>&5
+am_cv_exeext=`ls am_c_test.* | grep -v am_c_test.c | sed -e s/am_c_test//`
+rm -f am_c_test*
+fi
+
+test x"${am_cv_exeext}" = x && am_cv_exeext=no
+fi
+EXEEXT=""
+test x"${am_cv_exeext}" != xno && EXEEXT=${am_cv_exeext}
+echo "$ac_t""${am_cv_exeext}" 1>&6
+
+
+# host-specific stuff:
+
+HDEFINES=
+
+. ${srcdir}/../bfd/configure.host
+
+
+AR=${AR-ar}
+
+# Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1749: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_RANLIB="ranlib"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+ echo "$ac_t""$RANLIB" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
+
+
+# Put a plausible default for CC_FOR_BUILD in Makefile.
+if test -z "$CC_FOR_BUILD"; then
+ if test "x$cross_compiling" = "xno"; then
+ CC_FOR_BUILD='$(CC)'
+ else
+ CC_FOR_BUILD=gcc
+ fi
+fi
+
+
for ac_hdr in string.h strings.h stdlib.h unistd.h fcntl.h sys/file.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:1097: checking for $ac_hdr" >&5
+echo "configure:1793: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1102 "configure"
+#line 1798 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1107: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1803: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
@@ -1130,12 +1826,12 @@ fi
done
echo $ac_n "checking for sys/wait.h that is POSIX.1 compatible""... $ac_c" 1>&6
-echo "configure:1134: checking for sys/wait.h that is POSIX.1 compatible" >&5
+echo "configure:1830: checking for sys/wait.h that is POSIX.1 compatible" >&5
if eval "test \"`echo '$''{'ac_cv_header_sys_wait_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1139 "configure"
+#line 1835 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/wait.h>
@@ -1151,7 +1847,7 @@ wait (&s);
s = WIFEXITED (s) ? WEXITSTATUS (s) : 1;
; return 0; }
EOF
-if { (eval echo configure:1155: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1851: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_sys_wait_h=yes
else
@@ -1174,19 +1870,19 @@ fi
# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments. Useless!
echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:1178: checking for working alloca.h" >&5
+echo "configure:1874: checking for working alloca.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1183 "configure"
+#line 1879 "configure"
#include "confdefs.h"
#include <alloca.h>
int main() {
char *p = alloca(2 * sizeof(int));
; return 0; }
EOF
-if { (eval echo configure:1190: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:1886: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
ac_cv_header_alloca_h=yes
else
@@ -1207,12 +1903,12 @@ EOF
fi
echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:1211: checking for alloca" >&5
+echo "configure:1907: checking for alloca" >&5
if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1216 "configure"
+#line 1912 "configure"
#include "confdefs.h"
#ifdef __GNUC__
@@ -1235,7 +1931,7 @@ int main() {
char *p = (char *) alloca(1);
; return 0; }
EOF
-if { (eval echo configure:1239: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:1935: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
ac_cv_func_alloca_works=yes
else
@@ -1267,12 +1963,12 @@ EOF
echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:1271: checking whether alloca needs Cray hooks" >&5
+echo "configure:1967: checking whether alloca needs Cray hooks" >&5
if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1276 "configure"
+#line 1972 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
@@ -1297,12 +1993,12 @@ echo "$ac_t""$ac_cv_os_cray" 1>&6
if test $ac_cv_os_cray = yes; then
for ac_func in _getb67 GETB67 getb67; do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1301: checking for $ac_func" >&5
+echo "configure:1997: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1306 "configure"
+#line 2002 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
@@ -1325,7 +2021,7 @@ $ac_func();
; return 0; }
EOF
-if { (eval echo configure:1329: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2025: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
@@ -1352,7 +2048,7 @@ done
fi
echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:1356: checking stack direction for C alloca" >&5
+echo "configure:2052: checking stack direction for C alloca" >&5
if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1360,7 +2056,7 @@ else
ac_cv_c_stack_direction=0
else
cat > conftest.$ac_ext <<EOF
-#line 1364 "configure"
+#line 2060 "configure"
#include "confdefs.h"
find_stack_direction ()
{
@@ -1379,7 +2075,7 @@ main ()
exit (find_stack_direction() < 0);
}
EOF
-if { (eval echo configure:1383: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2079: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
then
ac_cv_c_stack_direction=1
else
@@ -1403,12 +2099,12 @@ fi
for ac_func in sbrk utimes
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1407: checking for $ac_func" >&5
+echo "configure:2103: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1412 "configure"
+#line 2108 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
@@ -1431,7 +2127,7 @@ $ac_func();
; return 0; }
EOF
-if { (eval echo configure:1435: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2131: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
@@ -1457,12 +2153,12 @@ done
if test "x$cross_compiling" = "xno"; then
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:1461: checking for ANSI C header files" >&5
+echo "configure:2157: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1466 "configure"
+#line 2162 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
@@ -1470,7 +2166,7 @@ else
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1474: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2170: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
@@ -1487,7 +2183,7 @@ rm -f conftest*
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 1491 "configure"
+#line 2187 "configure"
#include "confdefs.h"
#include <string.h>
EOF
@@ -1505,7 +2201,7 @@ fi
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 1509 "configure"
+#line 2205 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
@@ -1526,7 +2222,7 @@ if test "$cross_compiling" = yes; then
:
else
cat > conftest.$ac_ext <<EOF
-#line 1530 "configure"
+#line 2226 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
@@ -1537,7 +2233,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
exit (0); }
EOF
-if { (eval echo configure:1541: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2237: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
then
:
else
@@ -1561,12 +2257,12 @@ EOF
fi
echo $ac_n "checking for pid_t""... $ac_c" 1>&6
-echo "configure:1565: checking for pid_t" >&5
+echo "configure:2261: checking for pid_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1570 "configure"
+#line 2266 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
@@ -1595,17 +2291,17 @@ fi
ac_safe=`echo "vfork.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for vfork.h""... $ac_c" 1>&6
-echo "configure:1599: checking for vfork.h" >&5
+echo "configure:2295: checking for vfork.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1604 "configure"
+#line 2300 "configure"
#include "confdefs.h"
#include <vfork.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1609: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2305: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
@@ -1630,18 +2326,18 @@ else
fi
echo $ac_n "checking for working vfork""... $ac_c" 1>&6
-echo "configure:1634: checking for working vfork" >&5
+echo "configure:2330: checking for working vfork" >&5
if eval "test \"`echo '$''{'ac_cv_func_vfork_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$cross_compiling" = yes; then
echo $ac_n "checking for vfork""... $ac_c" 1>&6
-echo "configure:1640: checking for vfork" >&5
+echo "configure:2336: checking for vfork" >&5
if eval "test \"`echo '$''{'ac_cv_func_vfork'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1645 "configure"
+#line 2341 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char vfork(); below. */
@@ -1664,7 +2360,7 @@ vfork();
; return 0; }
EOF
-if { (eval echo configure:1668: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2364: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_vfork=yes"
else
@@ -1685,7 +2381,7 @@ fi
else
cat > conftest.$ac_ext <<EOF
-#line 1689 "configure"
+#line 2385 "configure"
#include "confdefs.h"
/* Thanks to Paul Eggert for this test. */
#include <stdio.h>
@@ -1780,7 +2476,7 @@ main() {
}
}
EOF
-if { (eval echo configure:1784: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2480: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
then
ac_cv_func_vfork_works=yes
else
@@ -1804,12 +2500,12 @@ fi
else
echo $ac_n "checking for vfork""... $ac_c" 1>&6
-echo "configure:1808: checking for vfork" >&5
+echo "configure:2504: checking for vfork" >&5
if eval "test \"`echo '$''{'ac_cv_func_vfork'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1813 "configure"
+#line 2509 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char vfork(); below. */
@@ -1832,7 +2528,7 @@ vfork();
; return 0; }
EOF
-if { (eval echo configure:1836: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2532: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_vfork=yes"
else
@@ -1858,19 +2554,19 @@ fi
fi
echo $ac_n "checking for time_t in time.h""... $ac_c" 1>&6
-echo "configure:1862: checking for time_t in time.h" >&5
+echo "configure:2558: checking for time_t in time.h" >&5
if eval "test \"`echo '$''{'bu_cv_decl_time_t_time_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1867 "configure"
+#line 2563 "configure"
#include "confdefs.h"
#include <time.h>
int main() {
time_t i;
; return 0; }
EOF
-if { (eval echo configure:1874: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2570: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bu_cv_decl_time_t_time_h=yes
else
@@ -1891,19 +2587,19 @@ EOF
fi
echo $ac_n "checking for time_t in sys/types.h""... $ac_c" 1>&6
-echo "configure:1895: checking for time_t in sys/types.h" >&5
+echo "configure:2591: checking for time_t in sys/types.h" >&5
if eval "test \"`echo '$''{'bu_cv_decl_time_t_types_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1900 "configure"
+#line 2596 "configure"
#include "confdefs.h"
#include <sys/types.h>
int main() {
time_t i;
; return 0; }
EOF
-if { (eval echo configure:1907: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2603: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bu_cv_decl_time_t_types_h=yes
else
@@ -1926,12 +2622,12 @@ fi
# Under Next 3.2 <utime.h> apparently does not define struct utimbuf
# by default.
echo $ac_n "checking for utime.h""... $ac_c" 1>&6
-echo "configure:1930: checking for utime.h" >&5
+echo "configure:2626: checking for utime.h" >&5
if eval "test \"`echo '$''{'bu_cv_header_utime_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1935 "configure"
+#line 2631 "configure"
#include "confdefs.h"
#include <sys/types.h>
#ifdef HAVE_TIME_H
@@ -1942,7 +2638,7 @@ int main() {
struct utimbuf s;
; return 0; }
EOF
-if { (eval echo configure:1946: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2642: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bu_cv_header_utime_h=yes
else
@@ -1963,12 +2659,12 @@ EOF
fi
echo $ac_n "checking whether fprintf must be declared""... $ac_c" 1>&6
-echo "configure:1967: checking whether fprintf must be declared" >&5
+echo "configure:2663: checking whether fprintf must be declared" >&5
if eval "test \"`echo '$''{'bfd_cv_decl_needed_fprintf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1972 "configure"
+#line 2668 "configure"
#include "confdefs.h"
#include <stdio.h>
@@ -1989,7 +2685,7 @@ int main() {
char *(*pfn) = (char *(*)) fprintf
; return 0; }
EOF
-if { (eval echo configure:1993: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2689: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_decl_needed_fprintf=no
else
@@ -2011,12 +2707,12 @@ EOF
fi
echo $ac_n "checking whether strstr must be declared""... $ac_c" 1>&6
-echo "configure:2015: checking whether strstr must be declared" >&5
+echo "configure:2711: checking whether strstr must be declared" >&5
if eval "test \"`echo '$''{'bfd_cv_decl_needed_strstr'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2020 "configure"
+#line 2716 "configure"
#include "confdefs.h"
#include <stdio.h>
@@ -2037,7 +2733,7 @@ int main() {
char *(*pfn) = (char *(*)) strstr
; return 0; }
EOF
-if { (eval echo configure:2041: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2737: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_decl_needed_strstr=no
else
@@ -2059,12 +2755,12 @@ EOF
fi
echo $ac_n "checking whether sbrk must be declared""... $ac_c" 1>&6
-echo "configure:2063: checking whether sbrk must be declared" >&5
+echo "configure:2759: checking whether sbrk must be declared" >&5
if eval "test \"`echo '$''{'bfd_cv_decl_needed_sbrk'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2068 "configure"
+#line 2764 "configure"
#include "confdefs.h"
#include <stdio.h>
@@ -2085,7 +2781,7 @@ int main() {
char *(*pfn) = (char *(*)) sbrk
; return 0; }
EOF
-if { (eval echo configure:2089: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2785: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_decl_needed_sbrk=no
else
@@ -2107,12 +2803,12 @@ EOF
fi
echo $ac_n "checking whether getenv must be declared""... $ac_c" 1>&6
-echo "configure:2111: checking whether getenv must be declared" >&5
+echo "configure:2807: checking whether getenv must be declared" >&5
if eval "test \"`echo '$''{'bfd_cv_decl_needed_getenv'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2116 "configure"
+#line 2812 "configure"
#include "confdefs.h"
#include <stdio.h>
@@ -2133,7 +2829,7 @@ int main() {
char *(*pfn) = (char *(*)) getenv
; return 0; }
EOF
-if { (eval echo configure:2137: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2833: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_decl_needed_getenv=no
else
@@ -2399,19 +3095,32 @@ s%@build_alias@%$build_alias%g
s%@build_cpu@%$build_cpu%g
s%@build_vendor@%$build_vendor%g
s%@build_os@%$build_os%g
+s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
+s%@INSTALL_DATA@%$INSTALL_DATA%g
+s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
+s%@PACKAGE@%$PACKAGE%g
+s%@VERSION@%$VERSION%g
+s%@ACLOCAL@%$ACLOCAL%g
+s%@AUTOCONF@%$AUTOCONF%g
+s%@AUTOMAKE@%$AUTOMAKE%g
+s%@AUTOHEADER@%$AUTOHEADER%g
+s%@MAKEINFO@%$MAKEINFO%g
+s%@SET_MAKE@%$SET_MAKE%g
s%@CC@%$CC%g
+s%@RANLIB@%$RANLIB%g
+s%@LD@%$LD%g
+s%@LN_S@%$LN_S%g
+s%@LIBTOOL@%$LIBTOOL%g
+s%@YACC@%$YACC%g
+s%@LEX@%$LEX%g
+s%@LEXLIB@%$LEXLIB%g
+s%@CPP@%$CPP%g
+s%@LEX_OUTPUT_ROOT@%$LEX_OUTPUT_ROOT%g
+s%@MAINT@%$MAINT%g
+s%@EXEEXT@%$EXEEXT%g
s%@HDEFINES@%$HDEFINES%g
-s%@HLDFLAGS@%$HLDFLAGS%g
-s%@HLDENV@%$HLDENV%g
-s%@RPATH_ENVVAR@%$RPATH_ENVVAR%g
s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@BFDLIB@%$BFDLIB%g
-s%@OPCODES@%$OPCODES%g
s%@CC_FOR_BUILD@%$CC_FOR_BUILD%g
-s%@CPP@%$CPP%g
s%@ALLOCA@%$ALLOCA%g
s%@NLMCONV_DEFS@%$NLMCONV_DEFS%g
s%@BUILD_NLMCONV@%$BUILD_NLMCONV%g
@@ -2630,9 +3339,11 @@ fi; done
EOF
cat >> $CONFIG_STATUS <<EOF
+
EOF
cat >> $CONFIG_STATUS <<\EOF
-case x$CONFIG_HEADERS in xconfig.h:config.in) echo > stamp-h ;; esac
+test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h
+
exit 0
EOF
chmod +x $CONFIG_STATUS
diff --git a/binutils/configure.in b/binutils/configure.in
index 67fdb06..db82531 100644
--- a/binutils/configure.in
+++ b/binutils/configure.in
@@ -3,6 +3,12 @@ dnl
AC_PREREQ(2.5)
AC_INIT(ar.c)
+AC_CANONICAL_SYSTEM
+
+AM_INIT_AUTOMAKE(binutils, 2.8.2)
+
+AM_PROG_LIBTOOL
+
AC_ARG_ENABLE(targets,
[ --enable-targets alternative target configurations],
[case "${enableval}" in
@@ -11,17 +17,6 @@ AC_ARG_ENABLE(targets,
no) enable_targets= ;;
*) enable_targets=$enableval ;;
esac])dnl
-AC_ARG_ENABLE(shared,
-[ --enable-shared build shared BFD library],
-[case "${enableval}" in
- yes) shared=true shared_bfd=true shared_opcodes=true ;;
- no) shared=false ;;
- *bfd*opcodes*) shared=true shared_bfd=true shared_opcodes=true ;;
- *opcodes*bfd*) shared=true shared_bfd=true shared_opcodes=true ;;
- *bfd*) shared=true shared_bfd=true ;;
- *opcodes*) shared=true shared_opcodes=true ;;
- *) shared=false ;;
-esac])dnl
AC_ARG_ENABLE(commonbfdlib,
[ --enable-commonbfdlib build shared BFD/opcodes/libiberty library],
[case "${enableval}" in
@@ -30,10 +25,8 @@ AC_ARG_ENABLE(commonbfdlib,
*) AC_MSG_ERROR([bad value ${enableval} for BFD commonbfdlib option]) ;;
esac])dnl
-AC_CONFIG_HEADER(config.h:config.in)
+AM_CONFIG_HEADER(config.h:config.in)
-AC_CONFIG_AUX_DIR(`cd $srcdir/..; pwd`)
-AC_CANONICAL_SYSTEM
if test -z "$target" ; then
AC_MSG_ERROR(Unrecognized target system type; please check config.sub.)
fi
@@ -42,73 +35,27 @@ if test -z "$host" ; then
fi
AC_ARG_PROGRAM
+AC_PROG_CC
+
+AC_PROG_YACC
+AC_PROG_LEX
+AC_DECL_YYTEXT
+
+AM_MAINTAINER_MODE
+AM_CYGWIN32
+AM_EXEEXT
+
# host-specific stuff:
HDEFINES=
-HLDFLAGS=
-HLDENV=
-RPATH_ENVVAR=LD_LIBRARY_PATH
-
-AC_PROG_CC
. ${srcdir}/../bfd/configure.host
AC_SUBST(HDEFINES)
-AC_SUBST(HLDFLAGS)
-AC_SUBST(HLDENV)
-AC_SUBST(RPATH_ENVVAR)
AR=${AR-ar}
AC_SUBST(AR)
AC_PROG_RANLIB
-AC_PROG_INSTALL
-
-# For most hosts we can use a simple definition to pick up the BFD and
-# opcodes libraries. However, if we are building shared libraries, we
-# need to handle some hosts specially.
-BFDLIB='-L../bfd -lbfd'
-OPCODES='-L../opcodes -lopcodes'
-
-case "${host}" in
-*-*-sunos*)
- # On SunOS, we must link against the name we are going to install,
- # not -lbfd, since SunOS does not support SONAME.
- if test "${shared_bfd}" = "true"; then
- BFDLIB='-L../bfd -l`echo bfd | sed '"'"'$(program_transform_name)'"'"'`'
- fi
- if test "${shared_opcodes}" = "true"; then
- OPCODES='-L../opcodes -l`echo opcodes | sed '"'"'$(program_transform_name)'"'"'`'
- fi
- ;;
-alpha*-*-osf*)
- # On Alpha OSF/1, the native linker searches all the -L
- # directories for any LIB.so files, and only then searches for any
- # LIB.a files. That means that if there is an installed
- # libbfd.so, but this build is not done with --enable-shared, the
- # link will wind up being against the install libbfd.so rather
- # than the newly built libbfd. To avoid this, we must explicitly
- # link against libbfd.a when --enable-shared is not used.
- if test "${shared_bfd}" != "true"; then
- BFDLIB='../bfd/libbfd.a'
- fi
- if test "${shared_opcodes}" != "true"; then
- OPCODES='../opcodes/libopcodes.a'
- fi
- ;;
-esac
-
-if test "${commonbfdlib}" = "true"; then
- # when a shared libbfd is built with --enable-commonbfdlib,
- # all of libopcodes is available in libbfd.so. Unfortunately, on
- # HP/UX, when using gcc -g, the linker does a static link, so we
- # need to continue linking against opcodes on that platform.
- case "${host}" in
- *-*-hpux*) ;;
- *) OPCODES= ;;
- esac
-fi
-
-AC_SUBST(BFDLIB)
-AC_SUBST(OPCODES)
+AM_PROG_INSTALL
BFD_CC_FOR_BUILD
@@ -258,5 +205,4 @@ else
fi
AC_SUBST(UNDERSCORE)
-AC_OUTPUT(Makefile,
-[case x$CONFIG_HEADERS in xconfig.h:config.in) echo > stamp-h ;; esac])
+AC_OUTPUT(Makefile)
diff --git a/binutils/stamp-h.in b/binutils/stamp-h.in
new file mode 100644
index 0000000..9788f70
--- /dev/null
+++ b/binutils/stamp-h.in
@@ -0,0 +1 @@
+timestamp