aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--gdb/ChangeLog6
-rw-r--r--gdb/doc/ChangeLog5
-rw-r--r--gdb/doc/gdbint.texinfo15
-rw-r--r--gdb/gdb_buildall.sh268
4 files changed, 294 insertions, 0 deletions
diff --git a/gdb/ChangeLog b/gdb/ChangeLog
index cb94f85..eb3c93f 100644
--- a/gdb/ChangeLog
+++ b/gdb/ChangeLog
@@ -1,3 +1,9 @@
+2008-02-13 Markus Deuling <deuling@de.ibm.com>
+
+ Add script to build and test GDB using enable-targets=all.
+
+ * gdb_buildall.sh: New file.
+
2008-02-11 Maxim Grigoriev <maxim2405@gmail.com>
* NEWS (New native configurations): Xtensa GNU/Linux.
diff --git a/gdb/doc/ChangeLog b/gdb/doc/ChangeLog
index a9670b6..9f2dcf9 100644
--- a/gdb/doc/ChangeLog
+++ b/gdb/doc/ChangeLog
@@ -1,3 +1,8 @@
+2008-02-13 Markus Deuling <deuling@de.ibm.com>
+
+ * gdbint.texinfo (Build Script): New section. Mention new build script
+ gdb_buildall.sh.
+
2008-02-01 Jim Blandy <jimb@red-bean.com>
* gdb.texinfo (Help): Summarize 'info args' correctly.
diff --git a/gdb/doc/gdbint.texinfo b/gdb/doc/gdbint.texinfo
index 8946d5b..38e9b43 100644
--- a/gdb/doc/gdbint.texinfo
+++ b/gdb/doc/gdbint.texinfo
@@ -7058,6 +7058,21 @@ is so old that it has never been converted to use BFD. Now that's old!
@end table
+@section Build Script
+
+@cindex build script
+
+The script @file{gdb_buildall.sh} builds @value{GDBN} with flag
+@option{--enable-targets=all} set. This builds @value{GDBN} with all supported
+targets activated. This helps testing @value{GDBN} when doing changes that
+affect more than one architecture and is much faster than using
+@file{gdb_mbuild.sh}.
+
+After building @value{GDBN} the script checks which architectures are
+supported and then switches the current architecture to each of those to get
+information about the architecture. The test results are stored in log files
+in the directory the script was called from.
+
@include observer.texi
@raisesections
@include fdl.texi
diff --git a/gdb/gdb_buildall.sh b/gdb/gdb_buildall.sh
new file mode 100644
index 0000000..e55c10a
--- /dev/null
+++ b/gdb/gdb_buildall.sh
@@ -0,0 +1,268 @@
+#!/bin/sh
+
+# Build script to build GDB with all targets enabled.
+
+# Copyright (C) 2008 Free Software Foundation, Inc.
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# Make certain that the script is not running in an internationalized
+# environment. The script is grepping for GDB's output.
+
+# Contributed by Markus Deuling <deuling@de.ibm.com>.
+# Based on gdb_mbuild.sh from Richard Earnshaw.
+
+
+LANG=c ; export LANG
+LC_ALL=c ; export LC_ALL
+
+# Prints a usage message.
+usage()
+{
+ cat <<EOF
+Usage: gdb_buildall.sh [ <options> ... ] <srcdir> <builddir>
+
+Options:
+
+ --bfd64 Enable 64-bit BFD.
+ --clean Delete build directory after check.
+ -e <regexp> Regular expression for selecting the targets to build.
+ --force Force rebuild.
+ -j <makejobs> Run <makejobs> in parallel. Passed to make.
+ On a single cpu machine, 2 is recommended.
+ Arguments:
+ <srcdir> Source code directory.
+ <builddir> Build directory.
+
+ Environment variables examined (with default if not defined):
+ MAKE (make)"
+EOF
+ exit 1
+}
+
+### Command line options.
+makejobs=
+force=false
+targexp=""
+bfd_flag=""
+clean=false
+while test $# -gt 0
+do
+ case "$1" in
+ -j )
+ # Number of parallel make jobs.
+ shift
+ test $# -ge 1 || usage
+ makejobs="-j $1"
+ ;;
+ --clean )
+ # Shall the build directory be deleted after processing?
+ clean=true
+ ;;
+ -e )
+ # A regular expression for selecting targets
+ shift
+ test $# -ge 1 || usage
+ targexp="${targexp} -e ${1}"
+ ;;
+ --force )
+ # Force a rebuild
+ force=true ;
+ ;;
+ --bfd64)
+ # Enable 64-bit BFD
+ bfd_flag="--enable-64-bit-bfd"
+ ;;
+ -* ) usage ;;
+ *) break ;;
+ esac
+ shift
+done
+
+if test $# -ne 2
+then
+ usage
+fi
+
+### Environment.
+
+# Convert these to absolute directory paths.
+srcdir=`cd $1 && /bin/pwd` || exit 1
+builddir=`cd $2 && /bin/pwd` || exit 1
+# Version of make to use
+make=${MAKE:-make}
+MAKE=${make}
+export MAKE
+# We dont want GDB do dump cores.
+ulimit -c 0
+
+# Just make sure we're in the right directory.
+maintainers=${srcdir}/gdb/MAINTAINERS
+if [ ! -r ${maintainers} ]
+then
+ echo Maintainers file ${maintainers} not found
+ exit 1
+fi
+
+
+# Build GDB with all targets enabled.
+echo "Starting gdb_buildall.sh ..."
+
+trap "exit 1" 1 2 15
+dir=${builddir}/ALL
+
+# Should a scratch rebuild be forced, for perhaps the entire build be skipped?
+if ${force}
+then
+ echo ... forcing rebuild
+ rm -rf ${dir}
+fi
+
+# Did the previous configure attempt fail? If it did restart from scratch
+if test -d ${dir} -a ! -r ${dir}/Makefile
+then
+ echo ... removing partially configured
+ rm -rf ${dir}
+ if test -d ${dir}
+ then
+ echo "... ERROR: Unable to remove directory ${dir}"
+ exit 1
+ fi
+fi
+
+# Create build directory.
+mkdir -p ${dir}
+cd ${dir} || exit 1
+
+# Configure GDB.
+if test ! -r Makefile
+then
+ # Default SIMOPTS to GDBOPTS.
+ test -z "${simopts}" && simopts="${gdbopts}"
+
+ # The config options.
+ __build="--enable-targets=all"
+ __enable_gdb_build_warnings=`test -z "${gdbopts}" \
+ || echo "--enable-gdb-build-warnings=${gdbopts}"`
+ __enable_sim_build_warnings=`test -z "${simopts}" \
+ || echo "--enable-sim-build-warnings=${simopts}"`
+ __configure="${srcdir}/configure \
+ ${__build} ${bfd_flag}\
+ ${__enable_gdb_build_warnings} \
+ ${__enable_sim_build_warnings}"
+ echo ... ${__configure}
+ trap "echo Removing partially configured ${dir} directory ...; rm -rf ${dir}; exit 1" 1 2 15
+ ${__configure} > Config.log 2>&1
+ trap "exit 1" 1 2 15
+
+ # Without Makefile GDB won't build.
+ if test ! -r Makefile
+ then
+ echo "... CONFIG ERROR: GDB couldn't be configured " | tee -a Config.log
+ echo "... CONFIG ERROR: see Config.log for details "
+ exit 1
+ fi
+fi
+
+# Build GDB, if not built.
+gdb_bin="gdb/gdb"
+if test ! -x gdb/gdb -a ! -x gdb/gdb.exe
+then
+ echo ... ${make} ${makejobs}
+ ( ${make} ${makejobs} all-gdb || rm -f gdb/gdb gdb/gdb.exe
+ ) > Build.log 2>&1
+
+ # If the build fails, exit.
+ if test ! -x gdb/gdb -a ! -x gdb/gdb.exe
+ then
+ echo "... BUILD ERROR: GDB couldn't be compiled " | tee -a Build.log
+ echo "... BUILD ERROR: see Build.log for details "
+ exit 1
+ fi
+ if test -x gdb/gdb.exe
+ then
+ gdb_bin="gdb/gdb.exe"
+ fi
+fi
+
+
+# Retrieve a list of settable architectures by invoking "set architecture"
+# without parameters.
+cat <<EOF > arch
+set architecture
+quit
+EOF
+./gdb/gdb --batch -nx -x arch 2>&1 | cat > gdb_archs
+tail -n 1 gdb_archs | sed 's/auto./\n/g' | sed 's/,/\n/g' | sed 's/Requires an argument. Valid arguments are/\n/g' | sed '/^[ ]*$/d' > arch
+mv arch gdb_archs
+
+if test "${targexp}" != ""
+then
+ alltarg=`cat gdb_archs | grep ${targexp}`
+else
+ alltarg=`cat gdb_archs`
+fi
+rm -f gdb_archs
+
+# Test all architectures available in ALLTARG
+echo "maint print architecture for"
+echo "$alltarg" | while read target
+do
+ cat <<EOF > x
+set architecture ${target}
+maint print architecture
+quit
+EOF
+ log_file=$target.log
+ log_file=${log_file//:/_}
+ echo -n "... ${target}"
+ ./gdb/gdb -batch -nx -x x 2>&1 | cat > $log_file
+ # Check GDBs results
+ if test ! -s $log_file
+ then
+ echo " ERR: gdb printed no output" | tee -a $log_file
+ elif test `grep -o internal-error $log_file | tail -n 1`
+ then
+ echo " ERR: gdb panic" | tee -a $log_file
+ else
+ echo " OK"
+ fi
+
+ # Create a sed script that cleans up the output from GDB.
+ rm -f mbuild.sed
+ # Rules to replace <0xNNNN> with the corresponding function's name.
+ sed -n -e '/<0x0*>/d' -e 's/^.*<0x\([0-9a-f]*\)>.*$/0x\1/p' $log_file \
+ | sort -u \
+ | while read addr
+ do
+ func="`addr2line -f -e ./$gdb_bin -s ${addr} | sed -n -e 1p`"
+ echo "s/<${addr}>/<${func}>/g"
+ done >> mbuild.sed
+ # Rules to strip the leading paths off of file names.
+ echo 's/"\/.*\/gdb\//"gdb\//g' >> mbuild.sed
+ # Run the script.
+ sed -f mbuild.sed $log_file > Mbuild.log
+
+ mv Mbuild.log ${builddir}/$log_file
+ rm -rf $log_file x mbuild.sed
+done
+echo "done."
+
+# Clean up build directory if necessary.
+if ${clean}
+then
+ echo "cleanning up $dir"
+ rm -rf ${dir}
+fi
+
+exit 0