diff options
-rw-r--r-- | gdb/ChangeLog | 25 | ||||
-rw-r--r-- | gdb/breakpoint.c | 20 | ||||
-rw-r--r-- | gdb/breakpoint.h | 10 | ||||
-rw-r--r-- | gdb/inferior.h | 6 | ||||
-rw-r--r-- | gdb/infrun.c | 199 | ||||
-rw-r--r-- | gdb/testsuite/ChangeLog | 9 | ||||
-rw-r--r-- | gdb/testsuite/gdb.base/watchpoint.exp | 13 | ||||
-rw-r--r-- | gdb/testsuite/gdb.cp/annota2.exp | 3 | ||||
-rw-r--r-- | gdb/testsuite/gdb.cp/annota3.exp | 3 |
9 files changed, 189 insertions, 99 deletions
diff --git a/gdb/ChangeLog b/gdb/ChangeLog index 18244d2..7f99a5a 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,5 +1,30 @@ 2014-03-20 Pedro Alves <palves@redhat.com> + PR breakpoints/7143 + * breakpoint.c (should_be_inserted): Don't insert breakpoints that + are being stepped over. + (breakpoint_address_match): Make extern. + * breakpoint.h (breakpoint_address_match): New declaration. + * inferior.h (stepping_past_instruction_at): New declaration. + * infrun.c (struct step_over_info): New type. + (step_over_info): New global. + (set_step_over_info, clear_step_over_info) + (stepping_past_instruction_at): New functions. + (handle_inferior_event): Clear the step-over info when + trap_expected is cleared. + (resume): Remove now stale comment. + (clear_proceed_status): Clear step-over info. + (proceed): Adjust step-over handling to set or clear the step-over + info instead of removing all breakpoints. + (handle_signal_stop): When setting up a thread-hop, don't remove + breakpoints here. + (stop_stepping): Clear step-over info. + (keep_going): Adjust step-over handling to set or clear step-over + info and then always inserting breakpoints, instead of removing + all breakpoints when stepping over one. + +2014-03-20 Pedro Alves <palves@redhat.com> + * infrun.c (previous_inferior_ptid): Adjust comment. (deferred_step_ptid): Delete. (infrun_thread_ptid_changed, prepare_to_proceed) diff --git a/gdb/breakpoint.c b/gdb/breakpoint.c index 1551b99..03b21cb 100644 --- a/gdb/breakpoint.c +++ b/gdb/breakpoint.c @@ -165,11 +165,6 @@ static void describe_other_breakpoints (struct gdbarch *, struct program_space *, CORE_ADDR, struct obj_section *, int); -static int breakpoint_address_match (struct address_space *aspace1, - CORE_ADDR addr1, - struct address_space *aspace2, - CORE_ADDR addr2); - static int watchpoint_locations_match (struct bp_location *loc1, struct bp_location *loc2); @@ -2034,6 +2029,14 @@ should_be_inserted (struct bp_location *bl) if (bl->pspace->breakpoints_not_allowed) return 0; + /* Don't insert a breakpoint if we're trying to step past its + location. */ + if ((bl->loc_type == bp_loc_software_breakpoint + || bl->loc_type == bp_loc_hardware_breakpoint) + && stepping_past_instruction_at (bl->pspace->aspace, + bl->address)) + return 0; + return 1; } @@ -6792,12 +6795,9 @@ watchpoint_locations_match (struct bp_location *loc1, && loc1->length == loc2->length); } -/* Returns true if {ASPACE1,ADDR1} and {ASPACE2,ADDR2} represent the - same breakpoint location. In most targets, this can only be true - if ASPACE1 matches ASPACE2. On targets that have global - breakpoints, the address space doesn't really matter. */ +/* See breakpoint.h. */ -static int +int breakpoint_address_match (struct address_space *aspace1, CORE_ADDR addr1, struct address_space *aspace2, CORE_ADDR addr2) { diff --git a/gdb/breakpoint.h b/gdb/breakpoint.h index bf1f52a..b4abcb8 100644 --- a/gdb/breakpoint.h +++ b/gdb/breakpoint.h @@ -1135,6 +1135,16 @@ extern int hardware_watchpoint_inserted_in_range (struct address_space *, extern int breakpoint_thread_match (struct address_space *, CORE_ADDR, ptid_t); +/* Returns true if {ASPACE1,ADDR1} and {ASPACE2,ADDR2} represent the + same breakpoint location. In most targets, this can only be true + if ASPACE1 matches ASPACE2. On targets that have global + breakpoints, the address space doesn't really matter. */ + +extern int breakpoint_address_match (struct address_space *aspace1, + CORE_ADDR addr1, + struct address_space *aspace2, + CORE_ADDR addr2); + extern void until_break_command (char *, int, int); /* Initialize a struct bp_location. */ diff --git a/gdb/inferior.h b/gdb/inferior.h index b15f692..64a78ce 100644 --- a/gdb/inferior.h +++ b/gdb/inferior.h @@ -222,6 +222,12 @@ void set_step_info (struct frame_info *frame, struct symtab_and_line sal); extern void clear_exit_convenience_vars (void); +/* Returns true if we're trying to step past the instruction at + ADDRESS in ASPACE. */ + +extern int stepping_past_instruction_at (struct address_space *aspace, + CORE_ADDR address); + /* From infcmd.c */ extern void post_create_inferior (struct target_ops *, int); diff --git a/gdb/infrun.c b/gdb/infrun.c index f189a86..ed8ec30 100644 --- a/gdb/infrun.c +++ b/gdb/infrun.c @@ -977,6 +977,76 @@ static CORE_ADDR singlestep_pc; static ptid_t saved_singlestep_ptid; static int stepping_past_singlestep_breakpoint; +/* Info about an instruction that is being stepped over. Invalid if + ASPACE is NULL. */ + +struct step_over_info +{ + /* The instruction's address space. */ + struct address_space *aspace; + + /* The instruction's address. */ + CORE_ADDR address; +}; + +/* The step-over info of the location that is being stepped over. + + Note that with async/breakpoint always-inserted mode, a user might + set a new breakpoint/watchpoint/etc. exactly while a breakpoint is + being stepped over. As setting a new breakpoint inserts all + breakpoints, we need to make sure the breakpoint being stepped over + isn't inserted then. We do that by only clearing the step-over + info when the step-over is actually finished (or aborted). + + Presently GDB can only step over one breakpoint at any given time. + Given threads that can't run code in the same address space as the + breakpoint's can't really miss the breakpoint, GDB could be taught + to step-over at most one breakpoint per address space (so this info + could move to the address space object if/when GDB is extended). + The set of breakpoints being stepped over will normally be much + smaller than the set of all breakpoints, so a flag in the + breakpoint location structure would be wasteful. A separate list + also saves complexity and run-time, as otherwise we'd have to go + through all breakpoint locations clearing their flag whenever we + start a new sequence. Similar considerations weigh against storing + this info in the thread object. Plus, not all step overs actually + have breakpoint locations -- e.g., stepping past a single-step + breakpoint, or stepping to complete a non-continuable + watchpoint. */ +static struct step_over_info step_over_info; + +/* Record the address of the breakpoint/instruction we're currently + stepping over. */ + +static void +set_step_over_info (struct address_space *aspace, CORE_ADDR address) +{ + step_over_info.aspace = aspace; + step_over_info.address = address; +} + +/* Called when we're not longer stepping over a breakpoint / an + instruction, so all breakpoints are free to be (re)inserted. */ + +static void +clear_step_over_info (void) +{ + step_over_info.aspace = NULL; + step_over_info.address = 0; +} + +/* See inferior.h. */ + +int +stepping_past_instruction_at (struct address_space *aspace, + CORE_ADDR address) +{ + return (step_over_info.aspace != NULL + && breakpoint_address_match (aspace, address, + step_over_info.aspace, + step_over_info.address)); +} + /* Displaced stepping. */ @@ -1852,8 +1922,10 @@ a command like `return' or `jump' to continue execution.")); remove_single_step_breakpoints (); singlestep_breakpoints_inserted_p = 0; - insert_breakpoints (); + clear_step_over_info (); tp->control.trap_expected = 0; + + insert_breakpoints (); } if (should_resume) @@ -1894,12 +1966,7 @@ a command like `return' or `jump' to continue execution.")); hit, by single-stepping the thread with the breakpoint removed. In which case, we need to single-step only this thread, and keep others stopped, as they can miss this - breakpoint if allowed to run. - - The current code actually removes all breakpoints when - doing this, not just the one being stepped over, so if we - let other threads run, we can actually miss any - breakpoint, not just the one at PC. */ + breakpoint if allowed to run. */ resume_ptid = inferior_ptid; } @@ -2031,6 +2098,8 @@ clear_proceed_status (void) stop_after_trap = 0; + clear_step_over_info (); + observer_notify_about_to_proceed (); if (stop_registers) @@ -2217,22 +2286,23 @@ proceed (CORE_ADDR addr, enum gdb_signal siggnal, int step) tp = inferior_thread (); if (force_step) + tp->control.trap_expected = 1; + + /* If we need to step over a breakpoint, and we're not using + displaced stepping to do so, insert all breakpoints (watchpoints, + etc.) but the one we're stepping over, step one instruction, and + then re-insert the breakpoint when that step is finished. */ + if (tp->control.trap_expected && !use_displaced_stepping (gdbarch)) { - tp->control.trap_expected = 1; - /* If displaced stepping is enabled, we can step over the - breakpoint without hitting it, so leave all breakpoints - inserted. Otherwise we need to disable all breakpoints, step - one instruction, and then re-add them when that step is - finished. */ - if (!use_displaced_stepping (gdbarch)) - remove_breakpoints (); + struct regcache *regcache = get_current_regcache (); + + set_step_over_info (get_regcache_aspace (regcache), + regcache_read_pc (regcache)); } + else + clear_step_over_info (); - /* We can insert breakpoints if we're not trying to step over one, - or if we are stepping over one but we're using displaced stepping - to do so. */ - if (! tp->control.trap_expected || use_displaced_stepping (gdbarch)) - insert_breakpoints (); + insert_breakpoints (); if (!non_stop) { @@ -3992,9 +4062,6 @@ handle_signal_stop (struct execution_control_state *ecs) if (thread_hop_needed) { - struct regcache *thread_regcache; - int remove_status = 0; - if (debug_infrun) fprintf_unfiltered (gdb_stdlog, "infrun: thread_hop_needed\n"); @@ -4013,35 +4080,17 @@ handle_signal_stop (struct execution_control_state *ecs) singlestep_breakpoints_inserted_p = 0; } - /* If the arch can displace step, don't remove the - breakpoints. */ - thread_regcache = get_thread_regcache (ecs->ptid); - if (!use_displaced_stepping (get_regcache_arch (thread_regcache))) - remove_status = remove_breakpoints (); - - /* Did we fail to remove breakpoints? If so, try - to set the PC past the bp. (There's at least - one situation in which we can fail to remove - the bp's: On HP-UX's that use ttrace, we can't - change the address space of a vforking child - process until the child exits (well, okay, not - then either :-) or execs. */ - if (remove_status != 0) - error (_("Cannot step over breakpoint hit in wrong thread")); - else - { /* Single step */ - if (!non_stop) - { - /* Only need to require the next event from this - thread in all-stop mode. */ - waiton_ptid = ecs->ptid; - infwait_state = infwait_thread_hop_state; - } - - ecs->event_thread->stepping_over_breakpoint = 1; - keep_going (ecs); - return; + if (!non_stop) + { + /* Only need to require the next event from this thread + in all-stop mode. */ + waiton_ptid = ecs->ptid; + infwait_state = infwait_thread_hop_state; } + + ecs->event_thread->stepping_over_breakpoint = 1; + keep_going (ecs); + return; } } @@ -5695,6 +5744,8 @@ stop_stepping (struct execution_control_state *ecs) if (debug_infrun) fprintf_unfiltered (gdb_stdlog, "infrun: stop_stepping\n"); + clear_step_over_info (); + /* Let callers know we don't want to wait for the inferior anymore. */ ecs->wait_some_more = 0; } @@ -5727,6 +5778,9 @@ keep_going (struct execution_control_state *ecs) } else { + volatile struct gdb_exception e; + struct regcache *regcache = get_current_regcache (); + /* Either the trap was not expected, but we are continuing anyway (if we got a signal, the user asked it be passed to the child) @@ -5740,33 +5794,30 @@ keep_going (struct execution_control_state *ecs) already inserted breakpoints. Therefore, we don't care if breakpoints were already inserted, or not. */ - if (ecs->event_thread->stepping_over_breakpoint) + /* If we need to step over a breakpoint, and we're not using + displaced stepping to do so, insert all breakpoints + (watchpoints, etc.) but the one we're stepping over, step one + instruction, and then re-insert the breakpoint when that step + is finished. */ + if (ecs->event_thread->stepping_over_breakpoint + && !use_displaced_stepping (get_regcache_arch (regcache))) { - struct regcache *thread_regcache = get_thread_regcache (ecs->ptid); - - if (!use_displaced_stepping (get_regcache_arch (thread_regcache))) - { - /* Since we can't do a displaced step, we have to remove - the breakpoint while we step it. To keep things - simple, we remove them all. */ - remove_breakpoints (); - } + set_step_over_info (get_regcache_aspace (regcache), + regcache_read_pc (regcache)); } else - { - volatile struct gdb_exception e; + clear_step_over_info (); - /* Stop stepping if inserting breakpoints fails. */ - TRY_CATCH (e, RETURN_MASK_ERROR) - { - insert_breakpoints (); - } - if (e.reason < 0) - { - exception_print (gdb_stderr, e); - stop_stepping (ecs); - return; - } + /* Stop stepping if inserting breakpoints fails. */ + TRY_CATCH (e, RETURN_MASK_ERROR) + { + insert_breakpoints (); + } + if (e.reason < 0) + { + exception_print (gdb_stderr, e); + stop_stepping (ecs); + return; } ecs->event_thread->control.trap_expected diff --git a/gdb/testsuite/ChangeLog b/gdb/testsuite/ChangeLog index 1986747..ee71b746 100644 --- a/gdb/testsuite/ChangeLog +++ b/gdb/testsuite/ChangeLog @@ -1,5 +1,14 @@ 2014-03-20 Pedro Alves <palves@redhat.com> + PR breakpoints/7143 + * gdb.base/watchpoint.exp: Mention bugzilla bug number instead of + old gnats gdb/38. Remove kfail. Adjust to use gdb_test instead + of gdb_test_multiple. + * gdb.cp/annota2.exp: Remove kfail for gdb/38. + * gdb.cp/annota3.exp: Remove kfail for gdb/38. + +2014-03-20 Pedro Alves <palves@redhat.com> + * gdb.threads/step-over-lands-on-breakpoint.c: New file. * gdb.threads/step-over-lands-on-breakpoint.exp: New file. diff --git a/gdb/testsuite/gdb.base/watchpoint.exp b/gdb/testsuite/gdb.base/watchpoint.exp index 80d75cb..1123824 100644 --- a/gdb/testsuite/gdb.base/watchpoint.exp +++ b/gdb/testsuite/gdb.base/watchpoint.exp @@ -550,21 +550,16 @@ proc test_complex_watchpoint {} { proc test_watchpoint_and_breakpoint {} { global gdb_prompt - # This is a test for PR gdb/38, which involves setting a + # This is a test for PR breakpoints/7143, which involves setting a # watchpoint right after you've reached a breakpoint. if [runto func3] then { gdb_breakpoint [gdb_get_line_number "second x assignment"] gdb_continue_to_breakpoint "second x assignment" gdb_test "watch x" ".*atchpoint \[0-9\]+: x" - gdb_test_multiple "next" "next after watch x" { - -re ".*atchpoint \[0-9\]+: x\r\n\r\nOld value = 0\r\nNew value = 1\r\n.*$gdb_prompt $" { - pass "next after watch x" - } - -re "\[0-9\]+\[\t \]+y = 1;\r\n$gdb_prompt $" { - kfail "gdb/38" "next after watch x" - } - } + gdb_test "next" \ + ".*atchpoint \[0-9\]+: x\r\n\r\nOld value = 0\r\nNew value = 1\r\n.*" \ + "next after watch x" gdb_test_no_output "delete \$bpnum" "delete watch x" } diff --git a/gdb/testsuite/gdb.cp/annota2.exp b/gdb/testsuite/gdb.cp/annota2.exp index 00a6067..6fbf4b5 100644 --- a/gdb/testsuite/gdb.cp/annota2.exp +++ b/gdb/testsuite/gdb.cp/annota2.exp @@ -165,9 +165,6 @@ gdb_test_multiple "next" "watch triggered on a.x" { -re "\r\n\032\032post-prompt\r\n\r\n\032\032starting\r\n${frames_invalid}${breakpoints_invalid}\r\n\032\032watchpoint 3\r\n.*atchpoint 3: a.x\r\n\r\nOld value = 0\r\nNew value = 1\r\n\r\n\032\032frame-begin 0 $hex\r\n\r\n\032\032frame-function-name\r\nmain\r\n\032\032frame-args\r\n \\(\\)\r\n\032\032frame-source-begin\r\n at \r\n\032\032frame-source-file\r\n.*$srcfile\r\n\032\032frame-source-file-end\r\n:\r\n\032\032frame-source-line\r\n$decimal\r\n\032\032frame-source-end\r\n\r\n\r\n\032\032source .*$srcfile.*beg:$hex\r\n\r\n\032\032frame-end\r\n\r\n\032\032stopped\r\n.*$gdb_prompt$" { pass "watch triggered on a.x" } - -re "\r\n\032\032post-prompt\r\n\r\n\032\032starting\r\n${frames_invalid}\r\n\032\032source .*$srcfile.*beg:$hex\r\n\r\n\032\032frame-end\r\n\r\n\032\032stopped\r\n$gdb_prompt$" { - kfail "gdb/38" "watch triggered on a.x" - } } diff --git a/gdb/testsuite/gdb.cp/annota3.exp b/gdb/testsuite/gdb.cp/annota3.exp index 957d371..bbf9a1e 100644 --- a/gdb/testsuite/gdb.cp/annota3.exp +++ b/gdb/testsuite/gdb.cp/annota3.exp @@ -169,9 +169,6 @@ gdb_test_multiple "next" "watch triggered on a.x" { -re "\r\n\032\032post-prompt\r\n\r\n\032\032starting\r\n\r\n\032\032watchpoint 3\r\n.*atchpoint 3: a.x\r\n\r\nOld value = 0\r\nNew value = 1\r\n\r\n(\032\032frame-begin 0 0x\[0-9a-z\]+\r\n|)main \\(\\) at .*$srcfile:$decimal\r\n\r\n\032\032source .*$srcfile.*beg:$hex\r\n\r\n\032\032stopped\r\n.*$gdb_prompt$" { pass "watch triggered on a.x" } - -re "\r\n\032\032post-prompt\r\n\r\n\032\032starting\r\n\r\n\032\032source .*$srcfile.*beg:$hex\r\n\r\n\032\032stopped\r\n$gdb_prompt$" { - kfail "gdb/38" "watch triggered on a.x" - } } # |