aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--gdb/ChangeLog6
-rw-r--r--gdb/dve3900-rom.c665
-rw-r--r--gdb/monitor.c49
-rw-r--r--gdb/monitor.h2
4 files changed, 618 insertions, 104 deletions
diff --git a/gdb/ChangeLog b/gdb/ChangeLog
index 7e09771..e527acf 100644
--- a/gdb/ChangeLog
+++ b/gdb/ChangeLog
@@ -1,3 +1,9 @@
+Fri Jan 23 16:49:41 1998 Mark Alexander <marka@cygnus.com>
+
+ * monitor.c (monitor_write, monitor_readchar): New functions.
+ * monitor.h (monitor_write, monitor_readchar): Declare.
+ * dve3900-rom.c: Add support for fast loading on ethernet connections.
+
Fri Jan 23 07:47:06 1998 Fred Fish <fnf@cygnus.com>
* config/d10v/tm-d10v.h (CALL_DUMMY): Define as "{ 0 }".
diff --git a/gdb/dve3900-rom.c b/gdb/dve3900-rom.c
index 766e2d5..c8752f6 100644
--- a/gdb/dve3900-rom.c
+++ b/gdb/dve3900-rom.c
@@ -23,9 +23,72 @@ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
#include "target.h"
#include "monitor.h"
#include "serial.h"
+#include "inferior.h"
+#include "command.h"
+#include "gdb_string.h"
+#include <time.h>
+
+/* Packet escape character used by Densan monitor. */
+
+#define PESC 0xdc
+
+/* Maximum packet size. This is actually smaller than necessary
+ just to be safe. */
+
+#define MAXPSIZE 1024
+
+/* External functions. */
+
+extern void report_transfer_performance PARAMS ((unsigned long,
+ time_t, time_t));
+
+/* Certain registers are "bitmapped", in that the monitor can only display
+ them or let the user modify them as a series of named bitfields.
+ This structure describes a field in a bitmapped register. */
+
+struct bit_field
+{
+ char *prefix; /* string appearing before the value */
+ char *suffix; /* string appearing after the value */
+ char *user_name; /* name used by human when entering field value */
+ int length; /* number of bits in the field */
+ int start; /* starting (least significant) bit number of field */
+};
+
+/* Local functions for register manipulation. */
+
+static void r3900_supply_register PARAMS ((char *regname, int regnamelen,
+ char *val, int vallen));
+static void fetch_bad_vaddr PARAMS ((void));
+static unsigned long fetch_fields PARAMS ((struct bit_field *bf));
+static void fetch_bitmapped_register PARAMS ((int regno,
+ struct bit_field *bf));
+static void r3900_fetch_registers PARAMS ((int regno));
+static void store_bitmapped_register PARAMS ((int regno,
+ struct bit_field *bf));
+static void r3900_store_registers PARAMS ((int regno));
+
+/* Local functions for fast binary loading. */
+
+static void write_long PARAMS ((char *buf, long n));
+static void write_long_le PARAMS ((char *buf, long n));
+static int debug_readchar PARAMS ((int hex));
+static void debug_write PARAMS ((unsigned char *buf, int buflen));
+static void ignore_packet PARAMS ((void));
+static void send_packet PARAMS ((char type, unsigned char *buf, int buflen,
+ int seq));
+static void process_read_request PARAMS ((unsigned char *buf, int buflen));
+static void count_section PARAMS ((bfd *abfd, asection *s,
+ unsigned int *section_count));
+static void load_section PARAMS ((bfd *abfd, asection *s,
+ unsigned int *data_count));
+static void r3900_load PARAMS ((char *filename, int from_tty));
+
+/* Miscellaneous local functions. */
static void r3900_open PARAMS ((char *args, int from_tty));
+
/* Pointers to static functions in monitor.c for fetching and storing
registers. We can't use these function in certain cases where the Densan
monitor acts perversely: for registers that it displays in bit-map
@@ -35,6 +98,14 @@ static void r3900_open PARAMS ((char *args, int from_tty));
static void (*orig_monitor_fetch_registers) PARAMS ((int regno));
static void (*orig_monitor_store_registers) PARAMS ((int regno));
+/* Pointer to static function in monitor. for loading programs.
+ We use this function for loading S-records via the serial link. */
+
+static void (*orig_monitor_load) PARAMS ((char *file, int from_tty));
+
+/* This flag is set if a fast ethernet download should be used. */
+
+static int ethernet = 0;
/* This array of registers needs to match the indexes used by GDB. The
whole reason this exists is because the various ROM monitors use
@@ -81,81 +152,6 @@ static struct reg_entry
};
-/* The monitor prints register values in the form
-
- regname = xxxx xxxx
-
- We look up the register name in a table, and remove the embedded space in
- the hex value before passing it to monitor_supply_register. */
-
-static void
-r3900_supply_register (regname, regnamelen, val, vallen)
- char *regname;
- int regnamelen;
- char *val;
- int vallen;
-{
- int regno = -1;
- int i;
- char valbuf[10];
- char *p;
-
- /* Perform some sanity checks on the register name and value. */
- if (regnamelen < 2 || regnamelen > 7 || vallen != 9)
- return;
-
- /* Look up the register name. */
- for (i = 0; reg_table[i].name != NULL; i++)
- {
- int rlen = strlen (reg_table[i].name);
- if (rlen == regnamelen && strncmp (regname, reg_table[i].name, rlen) == 0)
- {
- regno = reg_table[i].regno;
- break;
- }
- }
- if (regno == -1)
- return;
-
- /* Copy the hex value to a buffer and eliminate the embedded space. */
- for (i = 0, p = valbuf; i < vallen; i++)
- if (val[i] != ' ')
- *p++ = val[i];
- *p = '\0';
-
- monitor_supply_register (regno, valbuf);
-}
-
-/* Fetch the BadVaddr register. Unlike the other registers, this
- one can't be modified, and the monitor won't even prompt to let
- you modify it. */
-
-static void
-r3900_fetch_badvaddr()
-{
- char buf[20];
- int c;
-
- monitor_printf ("xB\r");
- monitor_expect ("BadV=", NULL, 0);
- monitor_expect_prompt (buf, sizeof(buf));
- monitor_supply_register (BADVADDR_REGNUM, buf);
-}
-
-
-/* Certain registers are "bitmapped", in that the monitor can only display
- them or let the user modify them as a series of named bitfields.
- This structure describes a field in a bitmapped register. */
-
-struct bit_field
-{
- char *prefix; /* string appearing before the value */
- char *suffix; /* string appearing after the value */
- char *user_name; /* name used by human when entering field value */
- int length; /* number of bits in the field */
- int start; /* starting (least significant) bit number of field */
-};
-
/* The monitor displays the cache register along with the status register,
as if they were a single register. So when we want to fetch the
status register, parse but otherwise ignore the fields of the
@@ -231,15 +227,75 @@ static struct bit_field cause_fields[] =
};
+/* The monitor prints register values in the form
+
+ regname = xxxx xxxx
+
+ We look up the register name in a table, and remove the embedded space in
+ the hex value before passing it to monitor_supply_register. */
+
+static void
+r3900_supply_register (regname, regnamelen, val, vallen)
+ char *regname;
+ int regnamelen;
+ char *val;
+ int vallen;
+{
+ int regno = -1;
+ int i;
+ char valbuf[10];
+ char *p;
+
+ /* Perform some sanity checks on the register name and value. */
+ if (regnamelen < 2 || regnamelen > 7 || vallen != 9)
+ return;
+
+ /* Look up the register name. */
+ for (i = 0; reg_table[i].name != NULL; i++)
+ {
+ int rlen = strlen (reg_table[i].name);
+ if (rlen == regnamelen && strncmp (regname, reg_table[i].name, rlen) == 0)
+ {
+ regno = reg_table[i].regno;
+ break;
+ }
+ }
+ if (regno == -1)
+ return;
+
+ /* Copy the hex value to a buffer and eliminate the embedded space. */
+ for (i = 0, p = valbuf; i < vallen; i++)
+ if (val[i] != ' ')
+ *p++ = val[i];
+ *p = '\0';
+
+ monitor_supply_register (regno, valbuf);
+}
+
+/* Fetch the BadVaddr register. Unlike the other registers, this
+ one can't be modified, and the monitor won't even prompt to let
+ you modify it. */
+
+static void
+fetch_bad_vaddr()
+{
+ char buf[20];
+
+ monitor_printf ("xB\r");
+ monitor_expect ("BadV=", NULL, 0);
+ monitor_expect_prompt (buf, sizeof(buf));
+ monitor_supply_register (BADVADDR_REGNUM, buf);
+}
+
+
/* Read a series of bit fields from the monitor, and return their
combined binary value. */
static unsigned long
-r3900_fetch_fields (bf)
+fetch_fields (bf)
struct bit_field *bf;
{
char buf[20];
- int c;
unsigned long val = 0;
unsigned long bits;
@@ -260,18 +316,15 @@ r3900_fetch_fields (bf)
}
static void
-r3900_fetch_bitmapped_register (regno, bf)
+fetch_bitmapped_register (regno, bf)
int regno;
struct bit_field *bf;
{
- char buf[20];
- int c;
unsigned long val;
- unsigned long bits;
unsigned char regbuf[MAX_REGISTER_RAW_SIZE];
monitor_printf ("x%s\r", r3900_regnames[regno]);
- val = r3900_fetch_fields (bf);
+ val = fetch_fields (bf);
monitor_printf (".\r");
monitor_expect_prompt (NULL, 0);
@@ -294,13 +347,13 @@ r3900_fetch_registers (regno)
switch (regno)
{
case BADVADDR_REGNUM:
- r3900_fetch_badvaddr ();
+ fetch_bad_vaddr ();
return;
case PS_REGNUM:
- r3900_fetch_bitmapped_register (PS_REGNUM, status_fields);
+ fetch_bitmapped_register (PS_REGNUM, status_fields);
return;
case CAUSE_REGNUM:
- r3900_fetch_bitmapped_register (CAUSE_REGNUM, cause_fields);
+ fetch_bitmapped_register (CAUSE_REGNUM, cause_fields);
return;
default:
orig_monitor_fetch_registers (regno);
@@ -311,7 +364,7 @@ r3900_fetch_registers (regno)
/* Write the new value of the bitmapped register to the monitor. */
static void
-r3900_store_bitmapped_register (regno, bf)
+store_bitmapped_register (regno, bf)
int regno;
struct bit_field *bf;
{
@@ -319,7 +372,7 @@ r3900_store_bitmapped_register (regno, bf)
/* Fetch the current value of the register. */
monitor_printf ("x%s\r", r3900_regnames[regno]);
- oldval = r3900_fetch_fields (bf);
+ oldval = fetch_fields (bf);
newval = read_register (regno);
/* To save time, write just the fields that have changed. */
@@ -348,31 +401,413 @@ r3900_store_registers (regno)
switch (regno)
{
case PS_REGNUM:
- r3900_store_bitmapped_register (PS_REGNUM, status_fields);
+ store_bitmapped_register (PS_REGNUM, status_fields);
return;
case CAUSE_REGNUM:
- r3900_store_bitmapped_register (CAUSE_REGNUM, cause_fields);
+ store_bitmapped_register (CAUSE_REGNUM, cause_fields);
return;
default:
orig_monitor_store_registers (regno);
}
}
+
+/* Write a 4-byte integer to the buffer in big-endian order. */
+
static void
-r3900_load (monops, filename, from_tty)
- struct monitor_ops *monops;
- char *filename;
- int from_tty;
+write_long (buf, n)
+ char *buf;
+ long n;
+{
+ buf[0] = (n >> 24) & 0xff;
+ buf[1] = (n >> 16) & 0xff;
+ buf[2] = (n >> 8) & 0xff;
+ buf[3] = n & 0xff;
+}
+
+
+/* Write a 4-byte integer to the buffer in little-endian order. */
+
+static void
+write_long_le (buf, n)
+ char *buf;
+ long n;
+{
+ buf[0] = n & 0xff;
+ buf[1] = (n >> 8) & 0xff;
+ buf[2] = (n >> 16) & 0xff;
+ buf[3] = (n >> 24) & 0xff;
+}
+
+
+/* Read a character from the monitor. If remote debugging is on,
+ print the received character. If HEX is non-zero, print the
+ character in hexadecimal; otherwise, print it in ascii. */
+
+static int
+debug_readchar (hex)
+ int hex;
+{
+ char buf [10];
+ int c = monitor_readchar ();
+
+ if (remote_debug > 0)
+ {
+ if (hex)
+ sprintf (buf, "[%02x]", c & 0xff);
+ else if (c == '\0')
+ strcpy (buf, "\\0");
+ else
+ {
+ buf[0] = c;
+ buf[1] = '\0';
+ }
+ puts_debug ("Read -->", buf, "<--");
+ }
+ return c;
+}
+
+
+/* Send a buffer of characters to the monitor. If remote debugging is on,
+ print the sent buffer in hex. */
+
+static void
+debug_write (buf, buflen)
+ unsigned char *buf;
+ int buflen;
+{
+ char s[10];
+
+ monitor_write (buf, buflen);
+
+ if (remote_debug > 0)
+ {
+ while (buflen-- > 0)
+ {
+ sprintf (s, "[%02x]", *buf & 0xff);
+ puts_debug ("Sent -->", s, "<--");
+ buf++;
+ }
+ }
+}
+
+
+/* Ignore a packet sent to us by the monitor. It send packets
+ when its console is in "communications interface" mode. A packet
+ is of this form:
+
+ start of packet flag (one byte: 0xdc)
+ packet type (one byte)
+ length (low byte)
+ length (high byte)
+ data (length bytes)
+*/
+
+static void
+ignore_packet ()
+{
+ int c;
+ int len;
+
+ /* Ignore lots of trash (messages about section addresses, for example)
+ until we see the start of a packet. */
+ for (len = 0; len < 256; len++)
+ {
+ c = debug_readchar (0);
+ if (c == PESC)
+ break;
+ }
+ if (len == 8)
+ error ("Packet header byte not found; %02x seen instead.", c);
+
+ /* Read the packet type and length. */
+ c = debug_readchar (1); /* type */
+
+ c = debug_readchar (1); /* low byte of length */
+ len = c & 0xff;
+
+ c = debug_readchar (1); /* high byte of length */
+ len += (c & 0xff) << 8;
+
+ /* Ignore the rest of the packet. */
+ while (len-- > 0)
+ c = debug_readchar (1);
+}
+
+
+/* Send a packet to the monitor. */
+
+static void
+send_packet (type, buf, buflen, seq)
+ char type;
+ unsigned char *buf;
+ int buflen, seq;
+{
+ unsigned char hdr[4];
+ int len = buflen;
+ int sum, i;
+
+ /* If this is a 'p' packet, add one byte for a sequence number. */
+ if (type == 'p')
+ len++;
+
+ /* If the buffer has a non-zero length, add two bytes for a checksum. */
+ if (len > 0)
+ len += 2;
+
+ /* Write the packet header. */
+ hdr[0] = PESC;
+ hdr[1] = type;
+ hdr[2] = len & 0xff;
+ hdr[3] = (len >> 8) & 0xff;
+ debug_write (hdr, sizeof (hdr));
+
+ if (len)
+ {
+ /* Write the packet data. */
+ debug_write (buf, buflen);
+
+ /* Write the sequence number if this is a 'p' packet. */
+ if (type == 'p')
+ {
+ hdr[0] = seq;
+ debug_write (hdr, 1);
+ }
+
+ /* Write the checksum. */
+ sum = 0;
+ for (i = 0; i < buflen; i++)
+ {
+ int tmp = (buf[i] & 0xff);
+ if (i & 1)
+ sum += tmp;
+ else
+ sum += tmp << 8;
+ }
+ if (type == 'p')
+ {
+ if (buflen & 1)
+ sum += (seq & 0xff);
+ else
+ sum += (seq & 0xff) << 8;
+ }
+ sum = (sum & 0xffff) + ((sum >> 16) & 0xffff);
+ sum += (sum >> 16) & 1;
+ sum = ~sum;
+
+ hdr[0] = (sum >> 8) & 0xff;
+ hdr[1] = sum & 0xff;
+ debug_write (hdr, 2);
+ }
+}
+
+
+/* Respond to an expected read request from the monitor by sending
+ data in chunks. Handle all acknowledgements and handshaking packets. */
+
+static void
+process_read_request (buf, buflen)
+ unsigned char *buf;
+ int buflen;
+{
+ unsigned char len[4];
+ int i, chunk;
+ unsigned char seq;
+
+ /* Discard the read request. We have to hope it's for
+ the exact number of bytes we want to send. */
+ ignore_packet ();
+
+ for (i = chunk = 0, seq = 0; i < buflen; i += chunk, seq++)
+ {
+ /* Don't send more than 256 bytes at a time. */
+ chunk = buflen - i;
+ if (chunk > MAXPSIZE)
+ chunk = MAXPSIZE;
+
+ /* Write a packet containing the number of bytes we are sending. */
+ write_long_le (len, chunk);
+ send_packet ('p', len, sizeof (len), seq);
+
+ /* Write the data in raw form following the packet. */
+ debug_write (&buf[i], chunk);
+
+ /* Discard the ACK packet. */
+ ignore_packet ();
+ }
+
+ /* Send an "end of data" packet. */
+ send_packet ('e', "", 0, 0);
+}
+
+
+/* Count loadable sections (helper function for r3900_load). */
+
+static void
+count_section (abfd, s, section_count)
+ bfd *abfd;
+ asection *s;
+ unsigned int *section_count;
{
- extern int inferior_pid;
+ if (s->flags & SEC_LOAD && bfd_section_size (abfd, s) != 0)
+ (*section_count)++;
+}
- generic_load (filename, from_tty);
+
+/* Load a single BFD section (helper function for r3900_load).
+
+ WARNING: this code is filled with assumptions about how
+ the Densan monitor loads programs. The monitor issues
+ packets containing read requests, but rather than respond
+ to them in an general way, we expect them to following
+ a certain pattern.
+
+ For example, we know that the monitor will start loading by
+ issuing an 8-byte read request for the binary file header.
+ We know this is coming and ignore the actual contents
+ of the read request packet.
+*/
+
+static void
+load_section (abfd, s, data_count)
+ bfd *abfd;
+ asection *s;
+ unsigned int *data_count;
+{
+ if (s->flags & SEC_LOAD)
+ {
+ bfd_size_type section_size = bfd_section_size (abfd, s);
+ bfd_vma section_base = bfd_section_lma (abfd, s);
+ unsigned char *buffer;
+ unsigned char header[8];
+
+ /* Don't output zero-length sections. */
+ if (section_size == 0)
+ return;
+ if (data_count)
+ *data_count += section_size;
+
+ /* Print some fluff about the section being loaded. */
+ printf_filtered ("Loading section %s, size 0x%lx lma ",
+ bfd_section_name (abfd, s), (long)section_size);
+ print_address_numeric (section_base, 1, gdb_stdout);
+ printf_filtered ("\n");
+ gdb_flush (gdb_stdout);
+
+ /* Write the section header (location and size). */
+ write_long (&header[0], (long)section_base);
+ write_long (&header[4], (long)section_size);
+ process_read_request (header, sizeof (header));
+
+ /* Read the section contents into a buffer, write it out,
+ then free the buffer. */
+ buffer = (unsigned char *) xmalloc (section_size);
+ bfd_get_section_contents (abfd, s, buffer, 0, section_size);
+ process_read_request (buffer, section_size);
+ free (buffer);
+ }
+}
+
+
+/* When the ethernet is used as the console port on the Densan board,
+ we can use the "Rm" command to do a fast binary load. The format
+ of the download data is:
+
+ number of sections (4 bytes)
+ starting address (4 bytes)
+ repeat for each section:
+ location address (4 bytes)
+ section size (4 bytes)
+ binary data
+
+ The 4-byte fields are all in big-endian order.
+
+ Using this command is tricky because we have to put the monitor
+ into a special funky "communications interface" mode, in which
+ it sends and receives packets of data along with the normal prompt.
+ */
+
+static void
+r3900_load (filename, from_tty)
+ char *filename;
+ int from_tty;
+{
+ bfd *abfd;
+ unsigned int data_count = 0;
+ time_t start_time, end_time; /* for timing of download */
+ int section_count = 0;
+ unsigned char buffer[8];
+
+ /* If we are not using the ethernet, use the normal monitor load,
+ which sends S-records over the serial link. */
+ if (!ethernet)
+ {
+ orig_monitor_load (filename, from_tty);
+ return;
+ }
+
+ /* Open the file. */
+ if (filename == NULL || filename[0] == 0)
+ filename = get_exec_file (1);
+ abfd = bfd_openr (filename, 0);
+ if (!abfd)
+ error ("Unable to open file %s\n", filename);
+ if (bfd_check_format (abfd, bfd_object) == 0)
+ error ("File is not an object file\n");
+
+ /* Output the "vconsi" command to get the monitor in the communication
+ state where it will accept a load command. This will cause
+ the monitor to emit a packet before each prompt, so ignore the packet. */
+ monitor_printf ("vconsi\r");
+ ignore_packet ();
+ monitor_expect_prompt (NULL, 0);
+
+ /* Output the "Rm" (load) command and respond to the subsequent "open"
+ packet by sending an ACK packet. */
+ monitor_printf ("Rm\r");
+ ignore_packet ();
+ send_packet ('a', "", 0, 0);
+
+ /* Output the fast load header (number of sections and starting address). */
+ bfd_map_over_sections ((bfd *) abfd, count_section, &section_count);
+ write_long (&buffer[0], (long)section_count);
+ if (exec_bfd)
+ write_long (&buffer[4], (long)bfd_get_start_address (exec_bfd));
+ else
+ write_long (&buffer[4], 0);
+ process_read_request (buffer, sizeof (buffer));
+
+ /* Output the section data. */
+ start_time = time (NULL);
+ bfd_map_over_sections (abfd, load_section, &data_count);
+ end_time = time (NULL);
+
+ /* Acknowledge the close packet and put the monitor back into
+ "normal" mode so it won't send packets any more. */
+ ignore_packet ();
+ send_packet ('a', "", 0, 0);
+ monitor_expect_prompt (NULL, 0);
+ monitor_printf ("vconsx\r");
+ monitor_expect_prompt (NULL, 0);
+
+ /* Print download performance information. */
+ printf_filtered ("Start address 0x%lx\n", (long)bfd_get_start_address (abfd));
+ report_transfer_performance (data_count, start_time, end_time);
/* Finally, make the PC point at the start address */
if (exec_bfd)
write_pc (bfd_get_start_address (exec_bfd));
inferior_pid = 0; /* No process now */
+
+ /* This is necessary because many things were based on the PC at the
+ time that we attached to the monitor, which is no longer valid
+ now that we have loaded new code (and just changed the PC).
+ Another way to do this might be to call normal_stop, except that
+ the stack may not be valid, and things would get horribly
+ confused... */
+
+ clear_symtab_users ();
}
@@ -381,6 +816,8 @@ static struct target_ops r3900_ops;
/* Commands to send to the monitor when first connecting:
* The bare carriage return forces a prompt from the monitor
(monitor doesn't prompt after a reset).
+ * The "vconsx" switches the monitor back to interactive mode
+ in case an aborted download had left it in packet mode.
* The "Xtr" command causes subsequent "t" (trace) commands to display
the general registers only.
* The "Xxr" command does the same thing for the "x" (examine
@@ -388,7 +825,8 @@ static struct target_ops r3900_ops;
* The "bx" command clears all breakpoints.
*/
-static char *r3900_inits[] = {"\r", "Xtr\r", "Xxr\r", "bx\r", NULL};
+static char *r3900_inits[] = {"\r", "vconsx\r", "Xtr\r", "Xxr\r", "bx\r", NULL};
+static char *dummy_inits[] = { NULL };
static struct monitor_ops r3900_cmds;
@@ -397,7 +835,32 @@ r3900_open (args, from_tty)
char *args;
int from_tty;
{
+ char buf[64];
+ int i;
+
monitor_open (args, &r3900_cmds, from_tty);
+
+ /* We have to handle sending the init strings ourselves, because
+ the first two strings we send (carriage returns) may not be echoed
+ by the monitor, but the rest will be. */
+ monitor_printf_noecho ("\r\r");
+ for (i = 0; r3900_inits[i] != NULL; i++)
+ {
+ monitor_printf (r3900_inits[i]);
+ monitor_expect_prompt (NULL, 0);
+ }
+
+ /* Attempt to determine whether the console device is ethernet or serial.
+ This will tell us which kind of load to use (S-records over a serial
+ link, or the Densan fast binary multi-section format over the net). */
+
+ ethernet = 0;
+ monitor_printf ("v\r");
+ if (monitor_expect ("console device :", NULL, 0) != -1)
+ if (monitor_expect ("\n", buf, sizeof (buf)) != -1)
+ if (strstr (buf, "ethernet") != NULL)
+ ethernet = 1;
+ monitor_expect_prompt (NULL, 0);
}
void
@@ -408,7 +871,7 @@ _initialize_r3900_rom ()
MO_CLR_BREAK_USES_ADDR |
MO_PRINT_PROGRAM_OUTPUT;
- r3900_cmds.init = r3900_inits;
+ r3900_cmds.init = dummy_inits;
r3900_cmds.cont = "g\r";
r3900_cmds.step = "t\r";
r3900_cmds.set_break = "b %Lx\r"; /* COREADDR */
@@ -435,9 +898,6 @@ _initialize_r3900_rom ()
r3900_cmds.supply_register = r3900_supply_register;
/* S-record download, via "keyboard port". */
r3900_cmds.load = "r0\r";
-#if 0 /* FIXME - figure out how to get fast load to work */
- r3900_cmds.load_routine = r3900_load;
-#endif
r3900_cmds.prompt = "#";
r3900_cmds.line_term = "\r";
r3900_cmds.target = &r3900_ops;
@@ -462,5 +922,10 @@ Specify the serial device it is connected to (e.g. /dev/ttya).";
r3900_ops.to_fetch_registers = r3900_fetch_registers;
r3900_ops.to_store_registers = r3900_store_registers;
+ /* Override the load function, but save the address of the default
+ function to use when loading S-records over a serial link. */
+ orig_monitor_load = r3900_ops.to_load;
+ r3900_ops.to_load = r3900_load;
+
add_target (&r3900_ops);
}
diff --git a/gdb/monitor.c b/gdb/monitor.c
index 1650800..03bfa59 100644
--- a/gdb/monitor.c
+++ b/gdb/monitor.c
@@ -178,8 +178,7 @@ monitor_printf_noecho (va_alist)
if (len + 1 > sizeof sndbuf)
abort ();
- if (SERIAL_WRITE(monitor_desc, sndbuf, len))
- fprintf_unfiltered (stderr, "SERIAL_WRITE failed: %s\n", safe_strerror (errno));
+ monitor_write (sndbuf, len);
}
/* monitor_printf -- Send data to monitor and check the echo. Works just like
@@ -215,8 +214,7 @@ monitor_printf (va_alist)
if (len + 1 > sizeof sndbuf)
abort ();
- if (SERIAL_WRITE(monitor_desc, sndbuf, len))
- fprintf_unfiltered (stderr, "SERIAL_WRITE failed: %s\n", safe_strerror (errno));
+ monitor_write (sndbuf, len);
/* We used to expect that the next immediate output was the characters we
just output, but sometimes some extra junk appeared before the characters
@@ -225,6 +223,49 @@ monitor_printf (va_alist)
monitor_expect (sndbuf, (char *)0, 0);
}
+
+/* Write characters to the remote system. */
+
+void
+monitor_write (buf, buflen)
+ char *buf;
+ int buflen;
+{
+ if (SERIAL_WRITE(monitor_desc, buf, buflen))
+ fprintf_unfiltered (stderr, "SERIAL_WRITE failed: %s\n", safe_strerror (errno));
+}
+
+
+/* Read a binary character from the remote system, doing all the fancy
+ timeout stuff, but without interpreting the character in any way,
+ and without printing remote debug information. */
+
+int
+monitor_readchar ()
+{
+ int c;
+ int looping;
+
+ do
+ {
+ looping = 0;
+ c = SERIAL_READCHAR (monitor_desc, timeout);
+
+ if (c >= 0)
+ c &= 0xff; /* don't lose bit 7 */
+ }
+ while (looping);
+
+ if (c >= 0)
+ return c;
+
+ if (c == SERIAL_TIMEOUT)
+ error ("Timeout reading from remote system.");
+
+ perror_with_name ("remote-monitor");
+}
+
+
/* Read a character from the remote system, doing all the fancy
timeout stuff. */
diff --git a/gdb/monitor.h b/gdb/monitor.h
index 14d99c9..48e83ba 100644
--- a/gdb/monitor.h
+++ b/gdb/monitor.h
@@ -217,5 +217,7 @@ extern void monitor_printf PARAMS ((char *, ...))
ATTR_FORMAT(printf, 1, 2);
extern void monitor_printf_noecho PARAMS ((char *, ...))
ATTR_FORMAT(printf, 1, 2);
+extern void monitor_write PARAMS ((char *buf, int buflen));
+extern int monitor_readchar PARAMS ((void));
extern char *monitor_get_dev_name PARAMS ((void));
extern void init_monitor_ops PARAMS ((struct target_ops *));