aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--gdb/.Sanitize1
-rw-r--r--gdb/ChangeLog22
-rwxr-xr-xgdb/configure3
-rw-r--r--gdb/configure.in3
-rw-r--r--gdb/monitor.c47
-rw-r--r--gdb/monitor.h12
-rw-r--r--gdb/parse.c4
-rw-r--r--gdb/sparc-tdep.c143
-rw-r--r--gdb/sparclet-rom.c279
-rw-r--r--gdb/symfile.c82
10 files changed, 507 insertions, 89 deletions
diff --git a/gdb/.Sanitize b/gdb/.Sanitize
index 6de1d5d..5f5925f 100644
--- a/gdb/.Sanitize
+++ b/gdb/.Sanitize
@@ -349,6 +349,7 @@ sparc-stub.c
sparc-tdep.c
sparcl-stub.c
sparcl-tdep.c
+sparclet-rom.c
srec.h
stabsread.c
stabsread.h
diff --git a/gdb/ChangeLog b/gdb/ChangeLog
index eb60268..e16d983 100644
--- a/gdb/ChangeLog
+++ b/gdb/ChangeLog
@@ -1,3 +1,25 @@
+
+
+
+Fri Jun 28 06:34:19 1996 Dawn Perchik <dawn@cygnus.com>
+
+ * configure,configure.in: Add target sparclet.
+ * monitor.h,monitor.c:
+ Added monitor flags MO_NO_ECHO_ON_SETMEM (don't expect echo on
+ setmem command), MO_RUN_FIRST_TIME (if command to start process
+ running on target is different from one to continue execution),
+ MO_HEX_PREFIX (if addresses from monitor have a "0x" prefix).
+ * monitor.c,parse.c,sparc-tdep.c:
+ Don't require strings in the registers array. This is to allow
+ NULLs to be place holders in the tm-*.h file so that only minor
+ changes are needed when a new processor is introduced (eg, one
+ without floating point).
+ * sparc-tdep.c: Conditionally remove dependancies on floating point.
+ * sparclet-rom.c,config/sparc/sparclet.mt,config/sparc/tm-sparclet.h:
+ New files for target sparclet.
+ * symfile.c: Add option for 2nd parameter on load command : a load
+ offset added to the vma of each section.
+
Fri Jun 28 05:39:19 1996 Dawn Perchik <dawn@cygnus.com>
* main.c (main): Add option "l" for setting remote_timeout.
diff --git a/gdb/configure b/gdb/configure
index 8d7fb10..910e3d7 100755
--- a/gdb/configure
+++ b/gdb/configure
@@ -3535,8 +3535,7 @@ sparc-*-sunos4*) gdb_target=sun4os4 ;;
sparc-*-sunos5*) gdb_target=sun4sol2 ;;
sparc-*-vxworks*) gdb_target=vxsparc ;;
sparc-*-*) gdb_target=sun4os4 ;;
-# Use sparc-em for sparclet for now.
-sparclet-*-*) gdb_target=sparc-em ;;
+sparclet-*-*) gdb_target=sparclet ;;
sparclite*-*-*) gdb_target=sparclite ;;
# It's not clear what the right solution for "v8plus" systems is yet.
# For now, stick with sparc-sun-solaris2 since that's what config.guess
diff --git a/gdb/configure.in b/gdb/configure.in
index 2390b46..44439ab 100644
--- a/gdb/configure.in
+++ b/gdb/configure.in
@@ -644,8 +644,7 @@ sparc-*-sunos4*) gdb_target=sun4os4 ;;
sparc-*-sunos5*) gdb_target=sun4sol2 ;;
sparc-*-vxworks*) gdb_target=vxsparc ;;
sparc-*-*) gdb_target=sun4os4 ;;
-# Use sparc-em for sparclet for now.
-sparclet-*-*) gdb_target=sparc-em ;;
+sparclet-*-*) gdb_target=sparclet;;
sparclite*-*-*) gdb_target=sparclite ;;
# It's not clear what the right solution for "v8plus" systems is yet.
# For now, stick with sparc-sun-solaris2 since that's what config.guess
diff --git a/gdb/monitor.c b/gdb/monitor.c
index 69edc9a..503930f 100644
--- a/gdb/monitor.c
+++ b/gdb/monitor.c
@@ -123,6 +123,8 @@ static int dump_reg_flag; /* Non-zero means do a dump_registers cmd when
monitor_wait wakes up. */
static DCACHE *remote_dcache;
+static int first_time=0; /* is this the first time we're executing after
+ gaving created the child proccess? */
/* monitor_debug is like fputs_unfiltered, except it prints special
characters in printable fashion. */
@@ -139,7 +141,7 @@ monitor_debug (prefix, string, suffix)
static int new_line=1;
static char *prev_prefix = "";
static char *prev_suffix = "";
-
+
/* if the prefix is changing, print the previous suffix, a new line,
and the new prefix */
if (strcmp(prev_prefix, prefix) != 0 && !new_line)
@@ -693,6 +695,15 @@ monitor_resume (pid, step, sig)
int pid, step;
enum target_signal sig;
{
+ /* Some monitors require a different command when starting a program */
+ if (current_monitor->flags & MO_RUN_FIRST_TIME && first_time == 1)
+ {
+ first_time = 0;
+ monitor_printf ("run\r");
+ if (current_monitor->flags & MO_NEED_REGDUMP_AFTER_CONT)
+ dump_reg_flag = 1;
+ return;
+ }
dcache_flush (remote_dcache);
if (step)
monitor_printf (current_monitor->step);
@@ -885,6 +896,20 @@ monitor_fetch_register (regno)
if (current_monitor->getreg.resp_delim)
monitor_expect (current_monitor->getreg.resp_delim, NULL, 0);
+ /* Skip leading spaces and "0x" if MO_HEX_PREFIX flag is set */
+ if (current_monitor->flags & MO_HEX_PREFIX)
+ {
+ int c;
+ c = readchar (timeout);
+ while (c == ' ')
+ c = readchar (timeout);
+ if ((c == '0') && ((c = readchar (timeout)) == 'x'))
+ ;
+ else
+ error ("Bad value returned from monitor while fetching register %x.",
+ regno);
+ }
+
/* Read upto the maximum number of hex digits for this register, skipping
spaces, but stop reading if something else is seen. Some monitors
like to drop leading zeros. */
@@ -1078,7 +1103,10 @@ monitor_write_memory (memaddr, myaddr, len)
val = extract_unsigned_integer (myaddr, len);
- monitor_printf (cmd, memaddr, val);
+ if (current_monitor->flags & MO_NO_ECHO_ON_SETMEM)
+ monitor_printf_noecho (cmd, memaddr, val);
+ else
+ monitor_printf (cmd, memaddr, val);
monitor_expect_prompt (NULL, 0);
@@ -1135,6 +1163,19 @@ monitor_read_memory_single (memaddr, myaddr, len)
/* Now, read the appropriate number of hex digits for this loc, skipping
spaces. */
+ /* Skip leading spaces and "0x" if MO_HEX_PREFIX flag is set */
+ if (current_monitor->flags & MO_HEX_PREFIX)
+ {
+ int c;
+ c = readchar (timeout);
+ while (c == ' ')
+ c = readchar (timeout);
+ if ((c == '0') && ((c = readchar (timeout)) == 'x'))
+ ;
+ else
+ error ("monitor_read_memory_single (0x%x): bad response from monitor: %.*s%c.",
+ memaddr, i, membuf, c);
+ }
for (i = 0; i < len * 2; i++)
{
int c;
@@ -1331,6 +1372,7 @@ monitor_create_inferior (exec_file, args, env)
if (args && (*args != '\000'))
error ("Args are not supported by the monitor.");
+ first_time = 1;
clear_proceed_status ();
proceed (bfd_get_start_address (exec_bfd), TARGET_SIGNAL_0, 0);
}
@@ -1432,6 +1474,7 @@ monitor_load (file, from_tty)
if (current_monitor->loadresp)
monitor_expect (current_monitor->loadresp, NULL, 0);
+/* FIXME Should add arg here for load_offset (already done for generic_load) */
load_srec (monitor_desc, file, 32, SREC_ALL, hashmark,
current_monitor->flags & MO_SREC_ACK ?
monitor_wait_srec_ack : NULL);
diff --git a/gdb/monitor.h b/gdb/monitor.h
index dc2f124..f658921 100644
--- a/gdb/monitor.h
+++ b/gdb/monitor.h
@@ -152,6 +152,18 @@ struct monitor_ops
#define MO_SREC_ACK 0x100
+/* Allow 0x prefix on addresses retured from monitor */
+
+#define MO_HEX_PREFIX 0x200
+
+/* Some monitors require a different command when starting a program */
+
+#define MO_RUN_FIRST_TIME 0x400
+
+/* Don't expect echos when getting memory */
+
+#define MO_NO_ECHO_ON_SETMEM 0x800
+
#define SREC_SIZE 160
extern void monitor_open PARAMS ((char *args, struct monitor_ops *ops,
diff --git a/gdb/parse.c b/gdb/parse.c
index 7d458c1..e4ff571 100644
--- a/gdb/parse.c
+++ b/gdb/parse.c
@@ -459,13 +459,13 @@ write_dollar_variable (str)
/* Handle tokens that refer to machine registers:
$ followed by a register name. */
for (i = 0; i < NUM_REGS; i++)
- if (str.length - 1 == strlen (reg_names[i])
+ if (reg_names[i] && str.length - 1 == strlen (reg_names[i])
&& STREQN (str.ptr + 1, reg_names[i], str.length - 1))
{
goto handle_register;
}
for (i = 0; i < num_std_regs; i++)
- if (str.length - 1 == strlen (std_regs[i].name)
+ if (std_regs[i].name && str.length - 1 == strlen (std_regs[i].name)
&& STREQN (str.ptr + 1, std_regs[i].name, str.length - 1))
{
i = std_regs[i].regnum;
diff --git a/gdb/sparc-tdep.c b/gdb/sparc-tdep.c
index 5a1eaa3..98ec9e2 100644
--- a/gdb/sparc-tdep.c
+++ b/gdb/sparc-tdep.c
@@ -1,5 +1,5 @@
/* Target-dependent code for the SPARC for GDB, the GNU debugger.
- Copyright 1986, 1987, 1989, 1991, 1992, 1993, 1994, 1995
+ Copyright 1986, 1987, 1989, 1991, 1992, 1993, 1994, 1995, 1996
Free Software Foundation, Inc.
This file is part of GDB.
@@ -34,9 +34,14 @@ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
#include "gdbcore.h"
#ifdef GDB_TARGET_IS_SPARC64
-#define NUM_SPARC_FPREGS 64
+#define FP_REGISTER_BYTES (64 * 4)
#else
-#define NUM_SPARC_FPREGS 32
+#define FP_REGISTER_BYTES (32 * 4)
+#endif
+
+/* If not defined, assume 32 bit sparc. */
+#ifndef FP_MAX_REGNUM
+#define FP_MAX_REGNUM (FP0_REGNUM + 32)
#endif
#define SPARC_INTREG_SIZE (REGISTER_RAW_SIZE (G0_REGNUM))
@@ -607,6 +612,22 @@ get_saved_register (raw_buffer, optimized, addrp, frame, regnum, lval)
*optimized = 0;
addr = 0;
+
+ /* FIXME This code extracted from infcmd.c; should put elsewhere! */
+ if (frame == NULL)
+ {
+ /* error ("No selected frame."); */
+ if (!target_has_registers)
+ error ("The program has no registers now.");
+ if (selected_frame == NULL)
+ error ("No selected frame.");
+ /* Try to use selected frame */
+ frame = get_prev_frame (selected_frame);
+ if (frame == 0)
+ error ("Cmd not meaningful in the outermost frame.");
+ }
+
+
frame1 = frame->next;
while (frame1 != NULL)
{
@@ -614,20 +635,36 @@ get_saved_register (raw_buffer, optimized, addrp, frame, regnum, lval)
read_register (SP_REGNUM))
&& frame1->pc <= FRAME_FP (frame1))
{
- /* Dummy frame. All but the window regs are in there somewhere. */
- /* FIXME: The offsets are wrong for sparc64 (eg: 0xa0). */
+ /* Dummy frame. All but the window regs are in there somewhere.
+ The window registers are saved on the stack, just like in a
+ normal frame. */
if (regnum >= G1_REGNUM && regnum < G1_REGNUM + 7)
addr = frame1->frame + (regnum - G0_REGNUM) * SPARC_INTREG_SIZE
- - (NUM_SPARC_FPREGS * 4 + 8 * SPARC_INTREG_SIZE);
+ - (FP_REGISTER_BYTES + 8 * SPARC_INTREG_SIZE);
else if (regnum >= I0_REGNUM && regnum < I0_REGNUM + 8)
- addr = frame1->frame + (regnum - I0_REGNUM) * SPARC_INTREG_SIZE
- - (NUM_SPARC_FPREGS * 4 + 16 * SPARC_INTREG_SIZE);
- else if (regnum >= FP0_REGNUM && regnum < FP0_REGNUM + NUM_SPARC_FPREGS)
+ addr = (frame1->prev->bottom
+ + (regnum - I0_REGNUM) * SPARC_INTREG_SIZE
+ + FRAME_SAVED_I0);
+ else if (regnum >= L0_REGNUM && regnum < L0_REGNUM + 8)
+ addr = (frame1->prev->bottom
+ + (regnum - L0_REGNUM) * SPARC_INTREG_SIZE
+ + FRAME_SAVED_L0);
+ else if (regnum >= O0_REGNUM && regnum < O0_REGNUM + 8)
+ addr = frame1->frame + (regnum - O0_REGNUM) * SPARC_INTREG_SIZE
+ - (FP_REGISTER_BYTES + 16 * SPARC_INTREG_SIZE);
+#ifdef FP0_REGNUM
+ else if (regnum >= FP0_REGNUM && regnum < FP0_REGNUM + 32)
addr = frame1->frame + (regnum - FP0_REGNUM) * 4
- - (NUM_SPARC_FPREGS * 4);
+ - (FP_REGISTER_BYTES);
+#ifdef GDB_TARGET_IS_SPARC64
+ else if (regnum >= FP0_REGNUM + 32 && regnum < FP_MAX_REGNUM)
+ addr = frame1->frame + 32 * 4 + (regnum - FP0_REGNUM - 32) * 8
+ - (FP_REGISTER_BYTES);
+#endif
+#endif /* FP0_REGNUM */
else if (regnum >= Y_REGNUM && regnum < NUM_REGS)
addr = frame1->frame + (regnum - Y_REGNUM) * SPARC_INTREG_SIZE
- - (NUM_SPARC_FPREGS * 4 + 24 * SPARC_INTREG_SIZE);
+ - (FP_REGISTER_BYTES + 24 * SPARC_INTREG_SIZE);
}
else if (frame1->flat)
{
@@ -715,8 +752,13 @@ get_saved_register (raw_buffer, optimized, addrp, frame, regnum, lval)
#endif
/* See tm-sparc.h for how this is calculated. */
+#ifdef FP0_REGNUM
#define DUMMY_STACK_REG_BUF_SIZE \
(((8+8+8) * SPARC_INTREG_SIZE) + (32 * REGISTER_RAW_SIZE (FP0_REGNUM)))
+#else
+#define DUMMY_STACK_REG_BUF_SIZE \
+(((8+8+8) * SPARC_INTREG_SIZE) )
+#endif /* FP0_REGNUM */
#define DUMMY_STACK_SIZE (DUMMY_STACK_REG_BUF_SIZE + DUMMY_REG_SAVE_OFFSET)
void
@@ -743,11 +785,11 @@ sparc_push_dummy_frame ()
&register_temp[16 * SPARC_INTREG_SIZE],
SPARC_INTREG_SIZE * 8);
- /* ??? The 32 here should be NUM_SPARC_FPREGS, but until we decide what
- REGISTER_RAW_SIZE should be for fp regs, it's left as is. */
+#ifdef FP0_REGNUM
read_register_bytes (REGISTER_BYTE (FP0_REGNUM),
&register_temp[24 * SPARC_INTREG_SIZE],
- REGISTER_RAW_SIZE (FP0_REGNUM) * 32);
+ FP_REGISTER_BYTES);
+#endif /* FP0_REGNUM */
sp -= DUMMY_STACK_SIZE;
@@ -820,19 +862,27 @@ sparc_frame_find_saved_regs (fi, saved_regs_addr)
for (regnum = G1_REGNUM; regnum < G1_REGNUM+7; regnum++)
saved_regs_addr->regs[regnum] =
frame_addr + (regnum - G0_REGNUM) * SPARC_INTREG_SIZE
- - (NUM_SPARC_FPREGS * 4 + 8 * SPARC_INTREG_SIZE);
+ - (FP_REGISTER_BYTES + 8 * SPARC_INTREG_SIZE);
for (regnum = I0_REGNUM; regnum < I0_REGNUM+8; regnum++)
saved_regs_addr->regs[regnum] =
frame_addr + (regnum - I0_REGNUM) * SPARC_INTREG_SIZE
- - (NUM_SPARC_FPREGS * 4 + 16 * SPARC_INTREG_SIZE);
+ - (FP_REGISTER_BYTES + 16 * SPARC_INTREG_SIZE);
+#ifdef FP0_REGNUM
for (regnum = FP0_REGNUM; regnum < FP0_REGNUM + 32; regnum++)
saved_regs_addr->regs[regnum] =
frame_addr + (regnum - FP0_REGNUM) * 4
- - (NUM_SPARC_FPREGS * 4);
+ - (FP_REGISTER_BYTES);
+#ifdef GDB_TARGET_IS_SPARC64
+ for (regnum = FP0_REGNUM + 32; regnum < FP_MAX_REGNUM; regnum++)
+ saved_regs_addr->regs[regnum] =
+ frame_addr + 32 * 4 + (regnum - FP0_REGNUM - 32) * 8
+ - (FP_REGISTER_BYTES);
+#endif
+#endif /* FP0_REGNUM */
for (regnum = Y_REGNUM; regnum < NUM_REGS; regnum++)
saved_regs_addr->regs[regnum] =
frame_addr + (regnum - Y_REGNUM) * SPARC_INTREG_SIZE - 0xe0;
- - (NUM_SPARC_FPREGS * 4 + 24 * SPARC_INTREG_SIZE);
+ - (FP_REGISTER_BYTES + 24 * SPARC_INTREG_SIZE);
frame_addr = fi->bottom ?
fi->bottom : read_register (SP_REGNUM);
}
@@ -908,11 +958,12 @@ sparc_pop_frame ()
int regnum;
sparc_frame_find_saved_regs (frame, &fsr);
+#ifdef FP0_REGNUM
if (fsr.regs[FP0_REGNUM])
{
- read_memory (fsr.regs[FP0_REGNUM], raw_buffer, NUM_SPARC_FPREGS * 4);
+ read_memory (fsr.regs[FP0_REGNUM], raw_buffer, FP_REGISTER_BYTES);
write_register_bytes (REGISTER_BYTE (FP0_REGNUM),
- raw_buffer, NUM_SPARC_FPREGS * 4);
+ raw_buffer, FP_REGISTER_BYTES);
}
#ifndef GDB_TARGET_IS_SPARC64
if (fsr.regs[FPS_REGNUM])
@@ -926,6 +977,7 @@ sparc_pop_frame ()
write_register_bytes (REGISTER_BYTE (CPS_REGNUM), raw_buffer, 4);
}
#endif
+#endif /* FP0_REGNUM */
if (fsr.regs[G1_REGNUM])
{
read_memory (fsr.regs[G1_REGNUM], raw_buffer, 7 * SPARC_INTREG_SIZE);
@@ -1205,7 +1257,7 @@ prfpregset_t *fpregsetp;
register int regi;
char *from;
- for (regi = FP0_REGNUM ; regi < FP0_REGNUM+32 ; regi++)
+ for (regi = FP0_REGNUM ; regi < FP_MAX_REGNUM ; regi++)
{
from = (char *) &fpregsetp->pr_fr.pr_regs[regi-FP0_REGNUM];
supply_register (regi, from);
@@ -1228,9 +1280,7 @@ int regno;
char *to;
char *from;
- /* ??? The 32 should probably be NUM_SPARC_FPREGS, but again we're
- waiting on what REGISTER_RAW_SIZE should be for fp regs. */
- for (regi = FP0_REGNUM ; regi < FP0_REGNUM + 32 ; regi++)
+ for (regi = FP0_REGNUM ; regi < FP_MAX_REGNUM ; regi++)
{
if ((regno == -1) || (regno == regi))
{
@@ -1360,17 +1410,50 @@ sparc_print_register_hook (regno)
{
unsigned LONGEST val;
- if (((unsigned) (regno) - FP0_REGNUM < FP_MAX_REGNUM - FP0_REGNUM)
- && ((regno) & 1) == 0)
+ /* Handle double/quad versions of lower 32 fp regs. */
+ if (regno >= FP0_REGNUM && regno < FP0_REGNUM + 32
+ && (regno & 1) == 0)
+ {
+ char value[16];
+
+ if (!read_relative_register_raw_bytes (regno, value)
+ && !read_relative_register_raw_bytes (regno + 1, value + 4))
+ {
+ printf_unfiltered ("\t");
+ print_floating (value, builtin_type_double, gdb_stdout);
+ }
+#if 0 /* FIXME: gdb doesn't handle long doubles */
+ if ((regno & 3) == 0)
+ {
+ if (!read_relative_register_raw_bytes (regno + 2, value + 8)
+ && !read_relative_register_raw_bytes (regno + 3, value + 12))
+ {
+ printf_unfiltered ("\t");
+ print_floating (value, builtin_type_long_double, gdb_stdout);
+ }
+ }
+#endif
+ return;
+ }
+
+#if 0 /* FIXME: gdb doesn't handle long doubles */
+ /* Print upper fp regs as long double if appropriate. */
+ if (regno >= FP0_REGNUM + 32 && regno < FP_MAX_REGNUM
+ /* We test for even numbered regs and not a multiple of 4 because
+ the upper fp regs are recorded as doubles. */
+ && (regno & 1) == 0)
{
- char doublereg[8]; /* two float regs */
- if (!read_relative_register_raw_bytes ((regno), doublereg))
+ char value[16];
+
+ if (!read_relative_register_raw_bytes (regno, value)
+ && !read_relative_register_raw_bytes (regno + 1, value + 8))
{
- printf_unfiltered("\t");
- print_floating (doublereg, builtin_type_double, gdb_stdout);
+ printf_unfiltered ("\t");
+ print_floating (value, builtin_type_long_double, gdb_stdout);
}
return;
}
+#endif
/* FIXME: Some of these are priviledged registers.
Not sure how they should be handled. */
diff --git a/gdb/sparclet-rom.c b/gdb/sparclet-rom.c
new file mode 100644
index 0000000..98bc27b
--- /dev/null
+++ b/gdb/sparclet-rom.c
@@ -0,0 +1,279 @@
+/* Remote target glue for the SPARC Sparclet ROM monitor.
+ Copyright 1995, 1996 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+
+
+#include "defs.h"
+#include "gdbcore.h"
+#include "target.h"
+#include "monitor.h"
+#include "serial.h"
+#include "srec.h"
+#include "symtab.h"
+#include "symfile.h" /* for generic_load */
+
+#if !defined (HAVE_TERMIOS) && !defined (HAVE_TERMIO) && !defined (HAVE_SGTTY)
+#define HAVE_SGTTY
+#endif
+
+#ifdef HAVE_SGTTY
+#include <sys/ioctl.h>
+#endif
+
+#include <sys/types.h> /* Needed by file.h on Sys V */
+#include <sys/file.h>
+#include <signal.h>
+#include <sys/stat.h>
+
+#define USE_GENERIC_LOAD
+#define USE_SW_BREAKS
+
+static struct target_ops sparclet_ops;
+
+static void sparclet_open PARAMS ((char *args, int from_tty));
+
+#ifdef USE_GENERIC_LOAD
+
+static void
+sparclet_load_gen (filename, from_tty)
+ char *filename;
+ int from_tty;
+{
+ extern int inferior_pid;
+
+ generic_load (filename, from_tty);
+ /* Finally, make the PC point at the start address */
+ if (exec_bfd)
+ write_pc (bfd_get_start_address (exec_bfd));
+
+ inferior_pid = 0; /* No process now */
+}
+
+#else
+
+static void
+sparclet_xmodem_load (desc, file, hashmark)
+ serial_t desc;
+ char *file;
+ int hashmark;
+{
+ bfd *abfd;
+ asection *s;
+ char *buffer;
+ int i;
+
+ buffer = alloca (XMODEM_PACKETSIZE);
+ abfd = bfd_openr (file, 0);
+ if (!abfd)
+ {
+ printf_filtered ("Unable to open file %s\n", file);
+ return;
+ }
+ if (bfd_check_format (abfd, bfd_object) == 0)
+ {
+ printf_filtered ("File is not an object file\n");
+ return;
+ }
+ for (s = abfd->sections; s; s = s->next)
+ if (s->flags & SEC_LOAD)
+ {
+ bfd_size_type section_size;
+ printf_filtered ("%s\t: 0x%4x .. 0x%4x ", s->name, s->vma,
+ s->vma + s->_raw_size);
+ gdb_flush (gdb_stdout);
+ monitor_printf (current_monitor->load, s->vma);
+ if (current_monitor->loadresp)
+ monitor_expect (current_monitor->loadresp, NULL, 0);
+ xmodem_init_xfer (desc);
+ section_size = bfd_section_size (abfd, s);
+ for (i = 0; i < section_size; i += XMODEM_DATASIZE)
+ {
+ int numbytes;
+ numbytes = min (XMODEM_DATASIZE, section_size - i);
+ bfd_get_section_contents (abfd, s, buffer + XMODEM_DATAOFFSET, i,
+ numbytes);
+ xmodem_send_packet (desc, buffer, numbytes, hashmark);
+ if (hashmark)
+ {
+ putchar_unfiltered ('#');
+ gdb_flush (gdb_stdout);
+ }
+ } /* Per-packet (or S-record) loop */
+ xmodem_finish_xfer (desc);
+ monitor_expect_prompt (NULL, 0);
+ putchar_unfiltered ('\n');
+ } /* Loadable sections */
+ if (hashmark)
+ putchar_unfiltered ('\n');
+}
+
+static void
+sparclet_load (desc, file, hashmark)
+ serial_t desc;
+ char *file;
+ int hashmark;
+{
+???
+}
+#endif /* USE_GENERIC_LOAD */
+
+/* This array of registers need to match the indexes used by GDB.
+ This exists because the various ROM monitors use different strings
+ than does GDB, and don't necessarily support all the registers
+ either. So, typing "info reg sp" becomes a "r30". */
+
+/*PSR 0x00000080 impl ver icc AW LE EE EC EF PIL S PS ET CWP WIM
+ 0x0 0x0 0x0 0 0 0 0 0 0x0 1 0 0 0x00 0x2
+ 0000010
+ INS LOCALS OUTS GLOBALS
+ 0 0x00000000 0x00000000 0x00000000 0x00000000
+ 1 0x00000000 0x00000000 0x00000000 0x00000000
+ 2 0x00000000 0x00000000 0x00000000 0x00000000
+ 3 0x00000000 0x00000000 0x00000000 0x00000000
+ 4 0x00000000 0x00000000 0x00000000 0x00000000
+ 5 0x00000000 0x00001000 0x00000000 0x00000000
+ 6 0x00000000 0x00000000 0x123f0000 0x00000000
+ 7 0x00000000 0x00000000 0x00000000 0x00000000
+pc: 0x12010000 0x00000000 unimp
+npc: 0x12010004 0x00001000 unimp 0x1000
+tbr: 0x00000000
+y: 0x00000000
+*/
+/* these correspond to the offsets from tm-* files from config directories */
+
+/* is wim part of psr?? */
+/* monitor wants lower case */
+static char *sparclet_regnames[NUM_REGS] = REGISTER_NAMES;
+
+/* Define the monitor command strings. Since these are passed directly
+ through to a printf style function, we may include formatting
+ strings. We also need a CR or LF on the end. */
+
+/* need to pause the monitor for timing reasons, so slow it down */
+
+static char *sparclet_inits[] = {"\n\r\r\n", NULL};
+
+static struct monitor_ops sparclet_cmds =
+{
+ MO_CLR_BREAK_USES_ADDR
+ | MO_HEX_PREFIX
+ | MO_HANDLE_NL
+ | MO_NO_ECHO_ON_OPEN
+ | MO_NO_ECHO_ON_SETMEM
+ | MO_RUN_FIRST_TIME
+ | MO_GETMEM_READ_SINGLE, /* flags */
+ sparclet_inits, /* Init strings */
+ "cont\r", /* continue command */
+ "step\r", /* single step */
+ "\r", /* break interrupts the program */
+ "+bp %x\r", /* set a breakpoint */
+ /* can't use "br" because only 2 hw bps are supported */
+ "-bp %x\r", /* clear a breakpoint */
+ "-bp\r", /* clear all breakpoints */
+ NULL, /* fill (start end val) */
+ /* can't use "fi" because it takes words, not bytes */
+ {
+ /* ex [addr] [-n count] [-b|-s|-l] default: ex cur -n 1 -b */
+ "ex %x -b\r%x\rq\r", /* setmem.cmdb (addr, value) */
+ "ex %x -s\r%x\rq\r", /* setmem.cmdw (addr, value) */
+ "ex %x -l\r%x\rq\r",
+ NULL, /* setmem.cmdll (addr, value) */
+ NULL, /*": ", /* setmem.resp_delim */
+ NULL, /*"? ", /* setmem.term */
+ NULL, /*"q\r", /* setmem.term_cmd */
+ },
+ {
+ /* since the parsing of multiple bytes is difficult due to
+ interspersed addresses, we'll only read 1 value at a time,
+ even tho these can handle a count */
+ /* we can use -n to set count to read, but may have to parse? */
+ "ex %x -n 1 -b\r", /* getmem.cmdb (addr, #bytes) */
+ "ex %x -n 1 -s\r", /* getmem.cmdw (addr, #swords) */
+ "ex %x -n 1 -l\r", /* getmem.cmdl (addr, #words) */
+ NULL, /* getmem.cmdll (addr, #dwords) */
+ ": ", /* getmem.resp_delim */
+ NULL, /* getmem.term */
+ NULL, /* getmem.term_cmd */
+ },
+ {
+ "reg %s 0x%x\r", /* setreg.cmd (name, value) */
+ NULL, /* setreg.resp_delim */
+ NULL, /* setreg.term */
+ NULL /* setreg.term_cmd */
+ },
+ {
+ "reg %s\r", /* getreg.cmd (name) */
+ ": ", /* getreg.resp_delim */
+ NULL, /* getreg.term */
+ NULL, /* getreg.term_cmd */
+ },
+ "reg\r", /* dump_registers */
+ "\\(\\w+\\)=\\([0-9a-fA-F]+\\)", /* register_pattern */
+ NULL, /* supply_register */
+#ifdef USE_GENERIC_LOAD
+ NULL, /* load_routine (defaults to SRECs) */
+ NULL, /* download command */
+ NULL, /* load response */
+#else
+ sparclet_load, /* load_routine (defaults to SRECs) */
+ /* load [c|a] [s|f|r] [addr count] */
+ "load a s %x\r", /* download command */
+ "load: ", /* load response */
+#endif
+ "monitor>", /* monitor command prompt */
+ /* yikes! gdb core dumps without this delimitor!! */
+ "\r", /* end-of-command delimitor */
+ NULL, /* optional command terminator */
+ &sparclet_ops, /* target operations */
+ SERIAL_1_STOPBITS, /* number of stop bits */
+ sparclet_regnames, /* registers names */
+ MONITOR_OPS_MAGIC /* magic */
+};
+
+static void
+sparclet_open (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ monitor_open (args, &sparclet_cmds, from_tty);
+}
+
+void
+_initialize_sparclet ()
+{
+ init_monitor_ops (&sparclet_ops);
+
+ sparclet_ops.to_shortname = "sparclet"; /* for the target command */
+ sparclet_ops.to_longname = "SPARC Sparclet monitor";
+#ifdef USE_GENERIC_LOAD
+ sparclet_ops.to_load = sparclet_load_gen; /* FIXME - should go back and try "do" */
+#endif
+#ifdef USE_SW_BREAKS
+ /* use SW breaks; target only supports 2 HW breakpoints */
+ sparclet_ops.to_insert_breakpoint = memory_insert_breakpoint;
+ sparclet_ops.to_remove_breakpoint = memory_remove_breakpoint;
+#endif
+
+ sparclet_ops.to_doc =
+ "Use a board running the Sparclet debug monitor.\n\
+Specify the serial device it is connected to (e.g. /dev/ttya).";
+
+ sparclet_ops.to_open = sparclet_open;
+ add_target (&sparclet_ops);
+}
+
diff --git a/gdb/symfile.c b/gdb/symfile.c
index e95d1db..f9a99ae 100644
--- a/gdb/symfile.c
+++ b/gdb/symfile.c
@@ -657,6 +657,8 @@ symbol_file_add (name, from_tty, addr, mainline, mapped, readnow)
new_symfile_objfile (objfile, mainline, from_tty);
+ target_new_objfile (objfile);
+
return (objfile);
}
@@ -920,6 +922,16 @@ generic_load (filename, from_tty)
bfd *loadfile_bfd;
time_t start_time, end_time; /* Start and end times of download */
unsigned long data_count = 0; /* Number of bytes transferred to memory */
+ int n;
+ unsigned long load_offset = 0; /* offset to add to vma for each section */
+ char buf[128];
+
+ /* enable user to specify address for downloading as 2nd arg to load */
+ n = sscanf(filename, "%s 0x%x", buf, &load_offset);
+ if (n > 1 )
+ filename = buf;
+ else
+ load_offset = 0;
loadfile_bfd = bfd_openr (filename, gnutarget);
if (loadfile_bfd == NULL)
@@ -959,6 +971,7 @@ generic_load (filename, from_tty)
old_chain = make_cleanup (free, buffer);
vma = bfd_get_section_vma (loadfile_bfd, s);
+ vma += load_offset;
/* Is this really necessary? I guess it gives the user something
to look at during a long download. */
@@ -979,6 +992,8 @@ generic_load (filename, from_tty)
end_time = time (NULL);
+ printf_filtered ("Start address 0x%lx\n", loadfile_bfd->start_address);
+
/* We were doing this in remote-mips.c, I suspect it is right
for other targets too. */
write_pc (loadfile_bfd->start_address);
@@ -1424,6 +1439,7 @@ clear_symtab_users ()
current_source_symtab = 0;
current_source_line = 0;
clear_pc_function_cache ();
+ target_new_objfile (NULL);
}
/* clear_symtab_users_once:
@@ -1654,76 +1670,42 @@ start_psymtab_common (objfile, section_offsets,
return (psymtab);
}
-/* Debugging versions of functions that are usually inline macros
- (see symfile.h). */
-
-#if !INLINE_ADD_PSYMBOL
-
/* Add a symbol with a long value to a psymtab.
Since one arg is a struct, we pass in a ptr and deref it (sigh). */
void
-add_psymbol_to_list (name, namelength, namespace, class, list, val, language,
- objfile)
+add_psymbol_to_list (name, namelength, namespace, class, list, val, coreaddr,
+ language, objfile)
char *name;
int namelength;
namespace_enum namespace;
enum address_class class;
struct psymbol_allocation_list *list;
- long val;
+ long val; /* Value as a long */
+ CORE_ADDR coreaddr; /* Value as a CORE_ADDR */
enum language language;
struct objfile *objfile;
{
register struct partial_symbol *psym;
char *buf = alloca (namelength + 1);
- struct partial_symbol psymbol;
+ /* psymbol is static so that there will be no uninitialized gaps in the
+ structure which might contain random data, causing cache misses in
+ bcache. */
+ static struct partial_symbol psymbol;
/* Create local copy of the partial symbol */
memcpy (buf, name, namelength);
buf[namelength] = '\0';
SYMBOL_NAME (&psymbol) = bcache (buf, namelength + 1, &objfile->psymbol_cache);
- SYMBOL_VALUE (&psymbol) = val;
- SYMBOL_SECTION (&psymbol) = 0;
- SYMBOL_LANGUAGE (&psymbol) = language;
- PSYMBOL_NAMESPACE (&psymbol) = namespace;
- PSYMBOL_CLASS (&psymbol) = class;
- SYMBOL_INIT_LANGUAGE_SPECIFIC (&psymbol, language);
-
- /* Stash the partial symbol away in the cache */
- psym = bcache (&psymbol, sizeof (struct partial_symbol), &objfile->psymbol_cache);
-
- /* Save pointer to partial symbol in psymtab, growing symtab if needed. */
- if (list->next >= list->list + list->size)
+ /* val and coreaddr are mutually exclusive, one of them *will* be zero */
+ if (val != 0)
{
- extend_psymbol_list (list, objfile);
+ SYMBOL_VALUE (&psymbol) = val;
+ }
+ else
+ {
+ SYMBOL_VALUE_ADDRESS (&psymbol) = coreaddr;
}
- *list->next++ = psym;
- OBJSTAT (objfile, n_psyms++);
-}
-
-/* Add a symbol with a CORE_ADDR value to a psymtab. */
-
-void
-add_psymbol_addr_to_list (name, namelength, namespace, class, list, val,
- language, objfile)
- char *name;
- int namelength;
- namespace_enum namespace;
- enum address_class class;
- struct psymbol_allocation_list *list;
- CORE_ADDR val;
- enum language language;
- struct objfile *objfile;
-{
- register struct partial_symbol *psym;
- char *buf = alloca (namelength + 1);
- struct partial_symbol psymbol;
-
- /* Create local copy of the partial symbol */
- memcpy (buf, name, namelength);
- buf[namelength] = '\0';
- SYMBOL_NAME (&psymbol) = bcache (buf, namelength + 1, &objfile->psymbol_cache);
- SYMBOL_VALUE_ADDRESS (&psymbol) = val;
SYMBOL_SECTION (&psymbol) = 0;
SYMBOL_LANGUAGE (&psymbol) = language;
PSYMBOL_NAMESPACE (&psymbol) = namespace;
@@ -1742,8 +1724,6 @@ add_psymbol_addr_to_list (name, namelength, namespace, class, list, val,
OBJSTAT (objfile, n_psyms++);
}
-#endif /* !INLINE_ADD_PSYMBOL */
-
/* Initialize storage for partial symbols. */
void
generated by cgit v1.1 at 2024-10-16 08:08:05 +0000