sim: overhaul & unify endian settings management

The m4 macro has 2 args: the "wire" settings (which represents the
hardwired port behavior), and the default settings (which are used
if nothing else is specified).  If none are specified, the arch is
expected to support both, and the value will be probed based on the
user runtime options or the input program.

Only two arches today set the default value (bpf & mips).  We can
probably let this go as it only shows up in one scenario: the sim
is invoked, but with no inputs, and no user endian selection.  This
means bpf will not behave like the other arches: an error is shown
and forces the user to make a choice.  If an input program is used
though, we'll still switch the default to that.  This allows us to
remove the WITH_DEFAULT_TARGET_BYTE_ORDER setting.

For the ports that set a "wire" endian, move it to the runtime init
of the respective sim_open calls.  This allows us to change the
WITH_TARGET_BYTE_ORDER to purely a user-selected configure setting
if they want to force a specific endianness.

With all the endian logic moved to runtime selection, we can move
the configure call up to the common dir so we only process it once
across all ports.

The ppc arch was picking the wire endian based on the target used,
but since we weren't doing that for other biendian arches, we can
let this go too.  We'll rely on the input selecting the endian, or
make the user decide.

4 files changed, 8 insertions, 59 deletions

diff --git a/sim/aarch64/ChangeLog b/sim/aarch64/ChangeLog
index ea1611d..a522fcf 100644
--- a/sim/aarch64/ChangeLog
+++ b/sim/aarch64/ChangeLog
@@ -1,3 +1,8 @@
+2021-06-17  Mike Frysinger  <vapier@gentoo.org>
+
+	* configure.ac: Delete SIM_AC_OPTION_ENDIAN call.
+	* aclocal.m4, configure: Regenerate.
+
 2021-06-16  Mike Frysinger  <vapier@gentoo.org>
 
 	* configure: Regenerate.
diff --git a/sim/aarch64/aclocal.m4 b/sim/aarch64/aclocal.m4
index 88b04d1..f5eee94 100644
--- a/sim/aarch64/aclocal.m4
+++ b/sim/aarch64/aclocal.m4
@@ -110,7 +110,6 @@ m4_include([../../ltsugar.m4])
 m4_include([../../ltversion.m4])
 m4_include([../../lt~obsolete.m4])
 m4_include([../m4/sim_ac_common.m4])
-m4_include([../m4/sim_ac_option_endian.m4])
 m4_include([../m4/sim_ac_option_hardware.m4])
 m4_include([../m4/sim_ac_option_inline.m4])
 m4_include([../m4/sim_ac_option_warnings.m4])
diff --git a/sim/aarch64/configure b/sim/aarch64/configure
index 3a18f37..2c8a6e0 100755
--- a/sim/aarch64/configure
+++ b/sim/aarch64/configure
@@ -636,7 +636,6 @@ sim_default_model
 sim_scache
 sim_float
 sim_bitsize
-sim_alignment
 cgen_breaks
 MAINT
 MAINTAINER_MODE_FALSE
@@ -753,8 +752,7 @@ WARN_CFLAGS
 sim_inline
 sim_hw
 sim_hw_objs
-sim_hw_cflags
-sim_endian'
+sim_hw_cflags'
 ac_subst_files=''
 ac_user_opts='
 enable_option_checking
@@ -768,7 +766,6 @@ with_gnu_ld
 enable_libtool_lock
 enable_maintainer_mode
 enable_sim_inline
-enable_sim_endian
 enable_werror
 enable_build_warnings
 enable_sim_build_warnings
@@ -1411,8 +1408,6 @@ Optional Features:
                           sometimes confusing) to the casual installer
   --enable-sim-inline=inlines
                           Specify which functions should be inlined
-  --enable-sim-endian=endian
-                          Specify target byte endian orientation
   --enable-werror         treat compile warnings as errors
   --enable-build-warnings enable build-time compiler warnings if gcc is used
   --enable-sim-build-warnings
@@ -10742,7 +10737,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 10745 "configure"
+#line 10740 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -10848,7 +10843,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 10851 "configure"
+#line 10846 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -11144,52 +11139,6 @@ fi
 
 
 
-wire_endian=""
-default_endian=""
-# Check whether --enable-sim-endian was given.
-if test "${enable_sim_endian+set}" = set; then :
-  enableval=$enable_sim_endian; case "${enableval}" in
-  b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
-  l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
-  yes)	 if test x"$wire_endian" != x; then
-	   sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
-	 else
-	  if test x"$default_endian" != x; then
-	     sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
-	   else
-	     echo "No hard-wired endian for target $target" 1>&6
-	     sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
-	   fi
-	 fi;;
-  no)	 if test x"$default_endian" != x; then
-	   sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
-	 else
-	   if test x"$wire_endian" != x; then
-	     sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
-	   else
-	     echo "No default endian for target $target" 1>&6
-	     sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
-	   fi
-	 fi;;
-  *)	 as_fn_error $? "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
-  echo "Setting endian flags = $sim_endian" 6>&1
-fi
-else
-  if test x"$default_endian" != x; then
-  sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
-else
-  if test x"$wire_endian" != x; then
-    sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
-  else
-    sim_endian=
-  fi
-fi
-fi
-
-
-
 # Check whether --enable-werror was given.
 if test "${enable_werror+set}" = set; then :
   enableval=$enable_werror; case "${enableval}" in
@@ -11412,8 +11361,6 @@ ac_config_commands="$ac_config_commands stamp-h"
 
 
 
-
-
 cat >confcache <<\_ACEOF
 # This file is a shell script that caches the results of configure
 # tests run on this system so they can be shared between configure
diff --git a/sim/aarch64/configure.ac b/sim/aarch64/configure.ac
index 7ac149a..849e957 100644
--- a/sim/aarch64/configure.ac
+++ b/sim/aarch64/configure.ac
@@ -24,6 +24,4 @@ AC_CONFIG_MACRO_DIRS([../m4 ../.. ../../config])
 
 SIM_AC_COMMON
 
-SIM_AC_OPTION_ENDIAN
-
 SIM_AC_OUTPUT