Move readline to the readline/readline subdirectory

readline turns out to be a bit of a stumbling block for the project to
move gdbsupport (and then gdbserver) to the top-level.

The issue is that readline headers are intended to be included with
names like "readline/readline.h".  To support this, gdb effectively
adds a -I option pointing to the top-level source directory -- but,
importantly, this option is not used when the system readline is used.

For gdbsupport, a -I option like this would always be needed, but that
in turn would break the system readline case.  This was PR build/17077,
fixed in commit a8a5dbcab8df0b3a9e04745d4fe8d64740acb323.

Previously, we had discussed this on the gdb-patches list in terms of
removing readline from the tree

    https://sourceware.org/ml/gdb-patches/2019-09/msg00317.html

However, Eli expressed some concerns, and Joel did as well (off-list).

Given those concerns, and the fact that a patch-free local readline is
relatively new in gdb (it was locally patched for years), I changed my
mind and decided to handle this situation by moving the readline
sources down a level.

That is, upstream readline is now in readline/readline, and the
top-level readline directory just contains the minimal configury
needed to build that.

This fixes the problem because, when gdb unconditionally adds a
-I$(top_srcdir), this will not find readline headers.  A separate -I
will be needed instead, which is exactly what's needed for
--with-system-readline.

gdb/ChangeLog
2019-10-23  Tom Tromey  <tom@tromey.com>

	* Makefile.in (READLINE_DIR): Update.

gdb/doc/ChangeLog
2019-10-23  Tom Tromey  <tom@tromey.com>

	* Makefile.in (READLINE_DIR): Update.

readline/ChangeLog
2019-10-23  Tom Tromey  <tom@tromey.com>

	Move old contents to readline/ subdirectory.
	* aclocal.m4, configure, configure.ac, .gitignore, Makefile.am,
	Makefile.in, README: New files.

Change-Id: Ice156a2ee09ea68722b48f64d97146d7428ea9e4

10 files changed, 0 insertions, 5834 deletions

diff --git a/readline/support/config.guess b/readline/support/config.guess
deleted file mode 100755
index 15c6cbf..0000000
--- a/readline/support/config.guess
+++ /dev/null
@@ -1,1702 +0,0 @@
-#! /bin/sh
-# Attempt to guess a canonical system name.
-#   Copyright 1992-2019 Free Software Foundation, Inc.
-
-timestamp='2019-08-04'
-
-# This file is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, see <https://www.gnu.org/licenses/>.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that
-# program.  This Exception is an additional permission under section 7
-# of the GNU General Public License, version 3 ("GPLv3").
-#
-# Originally written by Per Bothner; maintained since 2000 by Ben Elliston.
-#
-# You can get the latest version of this script from:
-# https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess
-#
-# Please send patches to <config-patches@gnu.org>.
-
-
-me=`echo "$0" | sed -e 's,.*/,,'`
-
-usage="\
-Usage: $0 [OPTION]
-
-Output the configuration name of the system \`$me' is run on.
-
-Options:
-  -h, --help         print this help, then exit
-  -t, --time-stamp   print date of last modification, then exit
-  -v, --version      print version number, then exit
-
-Report bugs and patches to <config-patches@gnu.org>."
-
-version="\
-GNU config.guess ($timestamp)
-
-Originally written by Per Bothner.
-Copyright 1992-2019 Free Software Foundation, Inc.
-
-This is free software; see the source for copying conditions.  There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-
-help="
-Try \`$me --help' for more information."
-
-# Parse command line
-while test $# -gt 0 ; do
-  case $1 in
-    --time-stamp | --time* | -t )
-       echo "$timestamp" ; exit ;;
-    --version | -v )
-       echo "$version" ; exit ;;
-    --help | --h* | -h )
-       echo "$usage"; exit ;;
-    -- )     # Stop option processing
-       shift; break ;;
-    - )	# Use stdin as input.
-       break ;;
-    -* )
-       echo "$me: invalid option $1$help" >&2
-       exit 1 ;;
-    * )
-       break ;;
-  esac
-done
-
-if test $# != 0; then
-  echo "$me: too many arguments$help" >&2
-  exit 1
-fi
-
-# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
-# compiler to aid in system detection is discouraged as it requires
-# temporary files to be created and, as you can see below, it is a
-# headache to deal with in a portable fashion.
-
-# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
-# use `HOST_CC' if defined, but it is deprecated.
-
-# Portable tmp directory creation inspired by the Autoconf team.
-
-tmp=
-# shellcheck disable=SC2172
-trap 'test -z "$tmp" || rm -fr "$tmp"' 0 1 2 13 15
-
-set_cc_for_build() {
-    : "${TMPDIR=/tmp}"
-    # shellcheck disable=SC2039
-    { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
-	{ test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir "$tmp" 2>/dev/null) ; } ||
-	{ tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir "$tmp" 2>/dev/null) && echo "Warning: creating insecure temp directory" >&2 ; } ||
-	{ echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; }
-    dummy=$tmp/dummy
-    case ${CC_FOR_BUILD-},${HOST_CC-},${CC-} in
-	,,)    echo "int x;" > "$dummy.c"
-	       for driver in cc gcc c89 c99 ; do
-		   if ($driver -c -o "$dummy.o" "$dummy.c") >/dev/null 2>&1 ; then
-		       CC_FOR_BUILD="$driver"
-		       break
-		   fi
-	       done
-	       if test x"$CC_FOR_BUILD" = x ; then
-		   CC_FOR_BUILD=no_compiler_found
-	       fi
-	       ;;
-	,,*)   CC_FOR_BUILD=$CC ;;
-	,*,*)  CC_FOR_BUILD=$HOST_CC ;;
-    esac
-}
-
-# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
-# (ghazi@noc.rutgers.edu 1994-08-24)
-if test -f /.attbin/uname ; then
-	PATH=$PATH:/.attbin ; export PATH
-fi
-
-UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
-UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
-UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
-UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
-
-case "$UNAME_SYSTEM" in
-Linux|GNU|GNU/*)
-	# If the system lacks a compiler, then just pick glibc.
-	# We could probably try harder.
-	LIBC=gnu
-
-	set_cc_for_build
-	cat <<-EOF > "$dummy.c"
-	#include <features.h>
-	#if defined(__UCLIBC__)
-	LIBC=uclibc
-	#elif defined(__dietlibc__)
-	LIBC=dietlibc
-	#else
-	LIBC=gnu
-	#endif
-	EOF
-	eval "`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^LIBC' | sed 's, ,,g'`"
-
-	# If ldd exists, use it to detect musl libc.
-	if command -v ldd >/dev/null && \
-		ldd --version 2>&1 | grep -q ^musl
-	then
-	    LIBC=musl
-	fi
-	;;
-esac
-
-# Note: order is significant - the case branches are not exclusive.
-
-case "$UNAME_MACHINE:$UNAME_SYSTEM:$UNAME_RELEASE:$UNAME_VERSION" in
-    *:NetBSD:*:*)
-	# NetBSD (nbsd) targets should (where applicable) match one or
-	# more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*,
-	# *-*-netbsdecoff* and *-*-netbsd*.  For targets that recently
-	# switched to ELF, *-*-netbsd* would select the old
-	# object file format.  This provides both forward
-	# compatibility and a consistent mechanism for selecting the
-	# object file format.
-	#
-	# Note: NetBSD doesn't particularly care about the vendor
-	# portion of the name.  We always set it to "unknown".
-	sysctl="sysctl -n hw.machine_arch"
-	UNAME_MACHINE_ARCH=`(uname -p 2>/dev/null || \
-	    "/sbin/$sysctl" 2>/dev/null || \
-	    "/usr/sbin/$sysctl" 2>/dev/null || \
-	    echo unknown)`
-	case "$UNAME_MACHINE_ARCH" in
-	    armeb) machine=armeb-unknown ;;
-	    arm*) machine=arm-unknown ;;
-	    sh3el) machine=shl-unknown ;;
-	    sh3eb) machine=sh-unknown ;;
-	    sh5el) machine=sh5le-unknown ;;
-	    earmv*)
-		arch=`echo "$UNAME_MACHINE_ARCH" | sed -e 's,^e\(armv[0-9]\).*$,\1,'`
-		endian=`echo "$UNAME_MACHINE_ARCH" | sed -ne 's,^.*\(eb\)$,\1,p'`
-		machine="${arch}${endian}"-unknown
-		;;
-	    *) machine="$UNAME_MACHINE_ARCH"-unknown ;;
-	esac
-	# The Operating System including object format, if it has switched
-	# to ELF recently (or will in the future) and ABI.
-	case "$UNAME_MACHINE_ARCH" in
-	    earm*)
-		os=netbsdelf
-		;;
-	    arm*|i386|m68k|ns32k|sh3*|sparc|vax)
-		set_cc_for_build
-		if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
-			| grep -q __ELF__
-		then
-		    # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
-		    # Return netbsd for either.  FIX?
-		    os=netbsd
-		else
-		    os=netbsdelf
-		fi
-		;;
-	    *)
-		os=netbsd
-		;;
-	esac
-	# Determine ABI tags.
-	case "$UNAME_MACHINE_ARCH" in
-	    earm*)
-		expr='s/^earmv[0-9]/-eabi/;s/eb$//'
-		abi=`echo "$UNAME_MACHINE_ARCH" | sed -e "$expr"`
-		;;
-	esac
-	# The OS release
-	# Debian GNU/NetBSD machines have a different userland, and
-	# thus, need a distinct triplet. However, they do not need
-	# kernel version information, so it can be replaced with a
-	# suitable tag, in the style of linux-gnu.
-	case "$UNAME_VERSION" in
-	    Debian*)
-		release='-gnu'
-		;;
-	    *)
-		release=`echo "$UNAME_RELEASE" | sed -e 's/[-_].*//' | cut -d. -f1,2`
-		;;
-	esac
-	# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
-	# contains redundant information, the shorter form:
-	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
-	echo "$machine-${os}${release}${abi-}"
-	exit ;;
-    *:Bitrig:*:*)
-	UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'`
-	echo "$UNAME_MACHINE_ARCH"-unknown-bitrig"$UNAME_RELEASE"
-	exit ;;
-    *:Bitrig:*:*)
-	UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'`
-	echo "$UNAME_MACHINE_ARCH"-unknown-bitrig"$UNAME_RELEASE"
-	exit ;;
-    *:OpenBSD:*:*)
-	UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
-	echo "$UNAME_MACHINE_ARCH"-unknown-openbsd"$UNAME_RELEASE"
-	exit ;;
-    *:LibertyBSD:*:*)
-	UNAME_MACHINE_ARCH=`arch | sed 's/^.*BSD\.//'`
-	echo "$UNAME_MACHINE_ARCH"-unknown-libertybsd"$UNAME_RELEASE"
-	exit ;;
-    *:MidnightBSD:*:*)
-	echo "$UNAME_MACHINE"-unknown-midnightbsd"$UNAME_RELEASE"
-	exit ;;
-    *:ekkoBSD:*:*)
-	echo "$UNAME_MACHINE"-unknown-ekkobsd"$UNAME_RELEASE"
-	exit ;;
-    *:SolidBSD:*:*)
-	echo "$UNAME_MACHINE"-unknown-solidbsd"$UNAME_RELEASE"
-	exit ;;
-    macppc:MirBSD:*:*)
-	echo powerpc-unknown-mirbsd"$UNAME_RELEASE"
-	exit ;;
-    *:MirBSD:*:*)
-	echo "$UNAME_MACHINE"-unknown-mirbsd"$UNAME_RELEASE"
-	exit ;;
-    *:Sortix:*:*)
-	echo "$UNAME_MACHINE"-unknown-sortix
-	exit ;;
-    *:Redox:*:*)
-	echo "$UNAME_MACHINE"-unknown-redox
-	exit ;;
-    mips:OSF1:*.*)
-        echo mips-dec-osf1
-        exit ;;
-    alpha:OSF1:*:*)
-	case $UNAME_RELEASE in
-	*4.0)
-		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
-		;;
-	*5.*)
-		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
-		;;
-	esac
-	# According to Compaq, /usr/sbin/psrinfo has been available on
-	# OSF/1 and Tru64 systems produced since 1995.  I hope that
-	# covers most systems running today.  This code pipes the CPU
-	# types through head -n 1, so we only detect the type of CPU 0.
-	ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^  The alpha \(.*\) processor.*$/\1/p' | head -n 1`
-	case "$ALPHA_CPU_TYPE" in
-	    "EV4 (21064)")
-		UNAME_MACHINE=alpha ;;
-	    "EV4.5 (21064)")
-		UNAME_MACHINE=alpha ;;
-	    "LCA4 (21066/21068)")
-		UNAME_MACHINE=alpha ;;
-	    "EV5 (21164)")
-		UNAME_MACHINE=alphaev5 ;;
-	    "EV5.6 (21164A)")
-		UNAME_MACHINE=alphaev56 ;;
-	    "EV5.6 (21164PC)")
-		UNAME_MACHINE=alphapca56 ;;
-	    "EV5.7 (21164PC)")
-		UNAME_MACHINE=alphapca57 ;;
-	    "EV6 (21264)")
-		UNAME_MACHINE=alphaev6 ;;
-	    "EV6.7 (21264A)")
-		UNAME_MACHINE=alphaev67 ;;
-	    "EV6.8CB (21264C)")
-		UNAME_MACHINE=alphaev68 ;;
-	    "EV6.8AL (21264B)")
-		UNAME_MACHINE=alphaev68 ;;
-	    "EV6.8CX (21264D)")
-		UNAME_MACHINE=alphaev68 ;;
-	    "EV6.9A (21264/EV69A)")
-		UNAME_MACHINE=alphaev69 ;;
-	    "EV7 (21364)")
-		UNAME_MACHINE=alphaev7 ;;
-	    "EV7.9 (21364A)")
-		UNAME_MACHINE=alphaev79 ;;
-	esac
-	# A Pn.n version is a patched version.
-	# A Vn.n version is a released version.
-	# A Tn.n version is a released field test version.
-	# A Xn.n version is an unreleased experimental baselevel.
-	# 1.2 uses "1.2" for uname -r.
-	echo "$UNAME_MACHINE"-dec-osf"`echo "$UNAME_RELEASE" | sed -e 's/^[PVTX]//' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz`"
-	# Reset EXIT trap before exiting to avoid spurious non-zero exit code.
-	exitcode=$?
-	trap '' 0
-	exit $exitcode ;;
-    Amiga*:UNIX_System_V:4.0:*)
-	echo m68k-unknown-sysv4
-	exit ;;
-    *:[Aa]miga[Oo][Ss]:*:*)
-	echo "$UNAME_MACHINE"-unknown-amigaos
-	exit ;;
-    *:[Mm]orph[Oo][Ss]:*:*)
-	echo "$UNAME_MACHINE"-unknown-morphos
-	exit ;;
-    *:OS/390:*:*)
-	echo i370-ibm-openedition
-	exit ;;
-    *:z/VM:*:*)
-	echo s390-ibm-zvmoe
-	exit ;;
-    *:OS400:*:*)
-	echo powerpc-ibm-os400
-	exit ;;
-    arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
-	echo arm-acorn-riscix"$UNAME_RELEASE"
-	exit ;;
-    arm*:riscos:*:*|arm*:RISCOS:*:*)
-	echo arm-unknown-riscos
-	exit ;;
-    SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
-	echo hppa1.1-hitachi-hiuxmpp
-	exit ;;
-    Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
-	# akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
-	if test "`(/bin/universe) 2>/dev/null`" = att ; then
-		echo pyramid-pyramid-sysv3
-	else
-		echo pyramid-pyramid-bsd
-	fi
-	exit ;;
-    NILE*:*:*:dcosx)
-	echo pyramid-pyramid-svr4
-	exit ;;
-    DRS?6000:unix:4.0:6*)
-	echo sparc-icl-nx6
-	exit ;;
-    DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
-	case `/usr/bin/uname -p` in
-	    sparc) echo sparc-icl-nx7; exit ;;
-	esac ;;
-    s390x:SunOS:*:*)
-	echo "$UNAME_MACHINE"-ibm-solaris2"`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`"
-	exit ;;
-    sun4H:SunOS:5.*:*)
-	echo sparc-hal-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`"
-	exit ;;
-    sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
-	echo sparc-sun-solaris2"`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`"
-	exit ;;
-    i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*)
-	echo i386-pc-auroraux"$UNAME_RELEASE"
-	exit ;;
-    i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*)
-	echo i386-pc-auroraux"$UNAME_RELEASE"
-	exit ;;
-    i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
-	set_cc_for_build
-	SUN_ARCH=i386
-	# If there is a compiler, see if it is configured for 64-bit objects.
-	# Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
-	# This test works for both compilers.
-	if [ "$CC_FOR_BUILD" != no_compiler_found ]; then
-	    if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
-		(CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \
-		grep IS_64BIT_ARCH >/dev/null
-	    then
-		SUN_ARCH=x86_64
-	    fi
-	fi
-	echo "$SUN_ARCH"-pc-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`"
-	exit ;;
-    sun4*:SunOS:6*:*)
-	# According to config.sub, this is the proper way to canonicalize
-	# SunOS6.  Hard to guess exactly what SunOS6 will be like, but
-	# it's likely to be more like Solaris than SunOS4.
-	echo sparc-sun-solaris3"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`"
-	exit ;;
-    sun4*:SunOS:*:*)
-	case "`/usr/bin/arch -k`" in
-	    Series*|S4*)
-		UNAME_RELEASE=`uname -v`
-		;;
-	esac
-	# Japanese Language versions have a version number like `4.1.3-JL'.
-	echo sparc-sun-sunos"`echo "$UNAME_RELEASE"|sed -e 's/-/_/'`"
-	exit ;;
-    sun3*:SunOS:*:*)
-	echo m68k-sun-sunos"$UNAME_RELEASE"
-	exit ;;
-    sun*:*:4.2BSD:*)
-	UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
-	test "x$UNAME_RELEASE" = x && UNAME_RELEASE=3
-	case "`/bin/arch`" in
-	    sun3)
-		echo m68k-sun-sunos"$UNAME_RELEASE"
-		;;
-	    sun4)
-		echo sparc-sun-sunos"$UNAME_RELEASE"
-		;;
-	esac
-	exit ;;
-    aushp:SunOS:*:*)
-	echo sparc-auspex-sunos"$UNAME_RELEASE"
-	exit ;;
-    # The situation for MiNT is a little confusing.  The machine name
-    # can be virtually everything (everything which is not
-    # "atarist" or "atariste" at least should have a processor
-    # > m68000).  The system name ranges from "MiNT" over "FreeMiNT"
-    # to the lowercase version "mint" (or "freemint").  Finally
-    # the system name "TOS" denotes a system which is actually not
-    # MiNT.  But MiNT is downward compatible to TOS, so this should
-    # be no problem.
-    atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
-	echo m68k-atari-mint"$UNAME_RELEASE"
-	exit ;;
-    atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
-	echo m68k-atari-mint"$UNAME_RELEASE"
-	exit ;;
-    *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
-	echo m68k-atari-mint"$UNAME_RELEASE"
-	exit ;;
-    milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
-	echo m68k-milan-mint"$UNAME_RELEASE"
-	exit ;;
-    hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
-	echo m68k-hades-mint"$UNAME_RELEASE"
-	exit ;;
-    *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
-	echo m68k-unknown-mint"$UNAME_RELEASE"
-	exit ;;
-    m68k:machten:*:*)
-	echo m68k-apple-machten"$UNAME_RELEASE"
-	exit ;;
-    powerpc:machten:*:*)
-	echo powerpc-apple-machten"$UNAME_RELEASE"
-	exit ;;
-    RISC*:Mach:*:*)
-	echo mips-dec-mach_bsd4.3
-	exit ;;
-    RISC*:ULTRIX:*:*)
-	echo mips-dec-ultrix"$UNAME_RELEASE"
-	exit ;;
-    VAX*:ULTRIX*:*:*)
-	echo vax-dec-ultrix"$UNAME_RELEASE"
-	exit ;;
-    2020:CLIX:*:* | 2430:CLIX:*:*)
-	echo clipper-intergraph-clix"$UNAME_RELEASE"
-	exit ;;
-    mips:*:*:UMIPS | mips:*:*:RISCos)
-	set_cc_for_build
-	sed 's/^	//' << EOF > "$dummy.c"
-#ifdef __cplusplus
-#include <stdio.h>  /* for printf() prototype */
-	int main (int argc, char *argv[]) {
-#else
-	int main (argc, argv) int argc; char *argv[]; {
-#endif
-	#if defined (host_mips) && defined (MIPSEB)
-	#if defined (SYSTYPE_SYSV)
-	  printf ("mips-mips-riscos%ssysv\\n", argv[1]); exit (0);
-	#endif
-	#if defined (SYSTYPE_SVR4)
-	  printf ("mips-mips-riscos%ssvr4\\n", argv[1]); exit (0);
-	#endif
-	#if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
-	  printf ("mips-mips-riscos%sbsd\\n", argv[1]); exit (0);
-	#endif
-	#endif
-	  exit (-1);
-	}
-EOF
-	$CC_FOR_BUILD -o "$dummy" "$dummy.c" &&
-	  dummyarg=`echo "$UNAME_RELEASE" | sed -n 's/\([0-9]*\).*/\1/p'` &&
-	  SYSTEM_NAME=`"$dummy" "$dummyarg"` &&
-	    { echo "$SYSTEM_NAME"; exit; }
-	echo mips-mips-riscos"$UNAME_RELEASE"
-	exit ;;
-    Motorola:PowerMAX_OS:*:*)
-	echo powerpc-motorola-powermax
-	exit ;;
-    Motorola:*:4.3:PL8-*)
-	echo powerpc-harris-powermax
-	exit ;;
-    Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
-	echo powerpc-harris-powermax
-	exit ;;
-    Night_Hawk:Power_UNIX:*:*)
-	echo powerpc-harris-powerunix
-	exit ;;
-    m88k:CX/UX:7*:*)
-	echo m88k-harris-cxux7
-	exit ;;
-    m88k:*:4*:R4*)
-	echo m88k-motorola-sysv4
-	exit ;;
-    m88k:*:3*:R3*)
-	echo m88k-motorola-sysv3
-	exit ;;
-    AViiON:dgux:*:*)
-	# DG/UX returns AViiON for all architectures
-	UNAME_PROCESSOR=`/usr/bin/uname -p`
-	if [ "$UNAME_PROCESSOR" = mc88100 ] || [ "$UNAME_PROCESSOR" = mc88110 ]
-	then
-	    if [ "$TARGET_BINARY_INTERFACE"x = m88kdguxelfx ] || \
-	       [ "$TARGET_BINARY_INTERFACE"x = x ]
-	    then
-		echo m88k-dg-dgux"$UNAME_RELEASE"
-	    else
-		echo m88k-dg-dguxbcs"$UNAME_RELEASE"
-	    fi
-	else
-	    echo i586-dg-dgux"$UNAME_RELEASE"
-	fi
-	exit ;;
-    M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
-	echo m88k-dolphin-sysv3
-	exit ;;
-    M88*:*:R3*:*)
-	# Delta 88k system running SVR3
-	echo m88k-motorola-sysv3
-	exit ;;
-    XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
-	echo m88k-tektronix-sysv3
-	exit ;;
-    Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
-	echo m68k-tektronix-bsd
-	exit ;;
-    *:IRIX*:*:*)
-	echo mips-sgi-irix"`echo "$UNAME_RELEASE"|sed -e 's/-/_/g'`"
-	exit ;;
-    ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
-	echo romp-ibm-aix     # uname -m gives an 8 hex-code CPU id
-	exit ;;               # Note that: echo "'`uname -s`'" gives 'AIX '
-    i*86:AIX:*:*)
-	echo i386-ibm-aix
-	exit ;;
-    ia64:AIX:*:*)
-	if [ -x /usr/bin/oslevel ] ; then
-		IBM_REV=`/usr/bin/oslevel`
-	else
-		IBM_REV="$UNAME_VERSION.$UNAME_RELEASE"
-	fi
-	echo "$UNAME_MACHINE"-ibm-aix"$IBM_REV"
-	exit ;;
-    *:AIX:2:3)
-	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
-		set_cc_for_build
-		sed 's/^		//' << EOF > "$dummy.c"
-		#include <sys/systemcfg.h>
-
-		main()
-			{
-			if (!__power_pc())
-				exit(1);
-			puts("powerpc-ibm-aix3.2.5");
-			exit(0);
-			}
-EOF
-		if $CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=`"$dummy"`
-		then
-			echo "$SYSTEM_NAME"
-		else
-			echo rs6000-ibm-aix3.2.5
-		fi
-	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
-		echo rs6000-ibm-aix3.2.4
-	else
-		echo rs6000-ibm-aix3.2
-	fi
-	exit ;;
-    *:AIX:*:[4567])
-	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
-	if /usr/sbin/lsattr -El "$IBM_CPU_ID" | grep ' POWER' >/dev/null 2>&1; then
-		IBM_ARCH=rs6000
-	else
-		IBM_ARCH=powerpc
-	fi
-	if [ -x /usr/bin/lslpp ] ; then
-		IBM_REV=`/usr/bin/lslpp -Lqc bos.rte.libc |
-			   awk -F: '{ print $3 }' | sed s/[0-9]*$/0/`
-	else
-		IBM_REV="$UNAME_VERSION.$UNAME_RELEASE"
-	fi
-	echo "$IBM_ARCH"-ibm-aix"$IBM_REV"
-	exit ;;
-    *:AIX:*:*)
-	echo rs6000-ibm-aix
-	exit ;;
-    ibmrt:4.4BSD:*|romp-ibm:4.4BSD:*)
-	echo romp-ibm-bsd4.4
-	exit ;;
-    ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC BSD and
-	echo romp-ibm-bsd"$UNAME_RELEASE"   # 4.3 with uname added to
-	exit ;;                             # report: romp-ibm BSD 4.3
-    *:BOSX:*:*)
-	echo rs6000-bull-bosx
-	exit ;;
-    DPX/2?00:B.O.S.:*:*)
-	echo m68k-bull-sysv3
-	exit ;;
-    9000/[34]??:4.3bsd:1.*:*)
-	echo m68k-hp-bsd
-	exit ;;
-    hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
-	echo m68k-hp-bsd4.4
-	exit ;;
-    9000/[34678]??:HP-UX:*:*)
-	HPUX_REV=`echo "$UNAME_RELEASE"|sed -e 's/[^.]*.[0B]*//'`
-	case "$UNAME_MACHINE" in
-	    9000/31?)            HP_ARCH=m68000 ;;
-	    9000/[34]??)         HP_ARCH=m68k ;;
-	    9000/[678][0-9][0-9])
-		if [ -x /usr/bin/getconf ]; then
-		    sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
-		    sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
-		    case "$sc_cpu_version" in
-		      523) HP_ARCH=hppa1.0 ;; # CPU_PA_RISC1_0
-		      528) HP_ARCH=hppa1.1 ;; # CPU_PA_RISC1_1
-		      532)                      # CPU_PA_RISC2_0
-			case "$sc_kernel_bits" in
-			  32) HP_ARCH=hppa2.0n ;;
-			  64) HP_ARCH=hppa2.0w ;;
-			  '') HP_ARCH=hppa2.0 ;;   # HP-UX 10.20
-			esac ;;
-		    esac
-		fi
-		if [ "$HP_ARCH" = "" ]; then
-		    set_cc_for_build
-		    sed 's/^		//' << EOF > "$dummy.c"
-
-		#define _HPUX_SOURCE
-		#include <stdlib.h>
-		#include <unistd.h>
-
-		int main ()
-		{
-		#if defined(_SC_KERNEL_BITS)
-		    long bits = sysconf(_SC_KERNEL_BITS);
-		#endif
-		    long cpu  = sysconf (_SC_CPU_VERSION);
-
-		    switch (cpu)
-			{
-			case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
-			case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
-			case CPU_PA_RISC2_0:
-		#if defined(_SC_KERNEL_BITS)
-			    switch (bits)
-				{
-				case 64: puts ("hppa2.0w"); break;
-				case 32: puts ("hppa2.0n"); break;
-				default: puts ("hppa2.0"); break;
-				} break;
-		#else  /* !defined(_SC_KERNEL_BITS) */
-			    puts ("hppa2.0"); break;
-		#endif
-			default: puts ("hppa1.0"); break;
-			}
-		    exit (0);
-		}
-EOF
-		    (CCOPTS="" $CC_FOR_BUILD -o "$dummy" "$dummy.c" 2>/dev/null) && HP_ARCH=`"$dummy"`
-		    test -z "$HP_ARCH" && HP_ARCH=hppa
-		fi ;;
-	esac
-	if [ "$HP_ARCH" = hppa2.0w ]
-	then
-	    set_cc_for_build
-
-	    # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
-	    # 32-bit code.  hppa64-hp-hpux* has the same kernel and a compiler
-	    # generating 64-bit code.  GNU and HP use different nomenclature:
-	    #
-	    # $ CC_FOR_BUILD=cc ./config.guess
-	    # => hppa2.0w-hp-hpux11.23
-	    # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
-	    # => hppa64-hp-hpux11.23
-
-	    if echo __LP64__ | (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) |
-		grep -q __LP64__
-	    then
-		HP_ARCH=hppa2.0w
-	    else
-		HP_ARCH=hppa64
-	    fi
-	fi
-	echo "$HP_ARCH"-hp-hpux"$HPUX_REV"
-	exit ;;
-    ia64:HP-UX:*:*)
-	HPUX_REV=`echo "$UNAME_RELEASE"|sed -e 's/[^.]*.[0B]*//'`
-	echo ia64-hp-hpux"$HPUX_REV"
-	exit ;;
-    3050*:HI-UX:*:*)
-	set_cc_for_build
-	sed 's/^	//' << EOF > "$dummy.c"
-	#include <unistd.h>
-	int
-	main ()
-	{
-	  long cpu = sysconf (_SC_CPU_VERSION);
-	  /* The order matters, because CPU_IS_HP_MC68K erroneously returns
-	     true for CPU_PA_RISC1_0.  CPU_IS_PA_RISC returns correct
-	     results, however.  */
-	  if (CPU_IS_PA_RISC (cpu))
-	    {
-	      switch (cpu)
-		{
-		  case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
-		  case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
-		  case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
-		  default: puts ("hppa-hitachi-hiuxwe2"); break;
-		}
-	    }
-	  else if (CPU_IS_HP_MC68K (cpu))
-	    puts ("m68k-hitachi-hiuxwe2");
-	  else puts ("unknown-hitachi-hiuxwe2");
-	  exit (0);
-	}
-EOF
-	$CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=`"$dummy"` &&
-		{ echo "$SYSTEM_NAME"; exit; }
-	echo unknown-hitachi-hiuxwe2
-	exit ;;
-    9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:*)
-	echo hppa1.1-hp-bsd
-	exit ;;
-    9000/8??:4.3bsd:*:*)
-	echo hppa1.0-hp-bsd
-	exit ;;
-    *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
-	echo hppa1.0-hp-mpeix
-	exit ;;
-    hp7??:OSF1:*:* | hp8?[79]:OSF1:*:*)
-	echo hppa1.1-hp-osf
-	exit ;;
-    hp8??:OSF1:*:*)
-	echo hppa1.0-hp-osf
-	exit ;;
-    i*86:OSF1:*:*)
-	if [ -x /usr/sbin/sysversion ] ; then
-	    echo "$UNAME_MACHINE"-unknown-osf1mk
-	else
-	    echo "$UNAME_MACHINE"-unknown-osf1
-	fi
-	exit ;;
-    parisc*:Lites*:*:*)
-	echo hppa1.1-hp-lites
-	exit ;;
-    C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
-	echo c1-convex-bsd
-	exit ;;
-    C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
-	if getsysinfo -f scalar_acc
-	then echo c32-convex-bsd
-	else echo c2-convex-bsd
-	fi
-	exit ;;
-    C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
-	echo c34-convex-bsd
-	exit ;;
-    C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
-	echo c38-convex-bsd
-	exit ;;
-    C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
-	echo c4-convex-bsd
-	exit ;;
-    CRAY*Y-MP:*:*:*)
-	echo ymp-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'
-	exit ;;
-    CRAY*[A-Z]90:*:*:*)
-	echo "$UNAME_MACHINE"-cray-unicos"$UNAME_RELEASE" \
-	| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
-	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
-	      -e 's/\.[^.]*$/.X/'
-	exit ;;
-    CRAY*TS:*:*:*)
-	echo t90-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'
-	exit ;;
-    CRAY*T3E:*:*:*)
-	echo alphaev5-cray-unicosmk"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'
-	exit ;;
-    CRAY*SV1:*:*:*)
-	echo sv1-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'
-	exit ;;
-    *:UNICOS/mp:*:*)
-	echo craynv-cray-unicosmp"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'
-	exit ;;
-    F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
-	FUJITSU_PROC=`uname -m | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz`
-	FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'`
-	FUJITSU_REL=`echo "$UNAME_RELEASE" | sed -e 's/ /_/'`
-	echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
-	exit ;;
-    5000:UNIX_System_V:4.*:*)
-	FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'`
-	FUJITSU_REL=`echo "$UNAME_RELEASE" | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/ /_/'`
-	echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
-	exit ;;
-    i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
-	echo "$UNAME_MACHINE"-pc-bsdi"$UNAME_RELEASE"
-	exit ;;
-    sparc*:BSD/OS:*:*)
-	echo sparc-unknown-bsdi"$UNAME_RELEASE"
-	exit ;;
-    *:BSD/OS:*:*)
-	echo "$UNAME_MACHINE"-unknown-bsdi"$UNAME_RELEASE"
-	exit ;;
-    arm:FreeBSD:*:*)
-	UNAME_PROCESSOR=`uname -p`
-	set_cc_for_build
-	if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
-	    | grep -q __ARM_PCS_VFP
-	then
-	    echo "${UNAME_PROCESSOR}"-unknown-freebsd"`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`"-gnueabi
-	else
-	    echo "${UNAME_PROCESSOR}"-unknown-freebsd"`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`"-gnueabihf
-	fi
-	exit ;;
-    *:FreeBSD:*:*)
-	UNAME_PROCESSOR=`/usr/bin/uname -p`
-	case "$UNAME_PROCESSOR" in
-	    amd64)
-		UNAME_PROCESSOR=x86_64 ;;
-	    i386)
-		UNAME_PROCESSOR=i586 ;;
-	esac
-	echo "$UNAME_PROCESSOR"-unknown-freebsd"`echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`"
-	exit ;;
-    i*:CYGWIN*:*)
-	echo "$UNAME_MACHINE"-pc-cygwin
-	exit ;;
-    *:MINGW64*:*)
-	echo "$UNAME_MACHINE"-pc-mingw64
-	exit ;;
-    *:MINGW64*:*)
-	echo "$UNAME_MACHINE"-pc-mingw64
-	exit ;;
-    *:MINGW*:*)
-	echo "$UNAME_MACHINE"-pc-mingw32
-	exit ;;
-    *:MSYS*:*)
-	echo "$UNAME_MACHINE"-pc-msys
-	exit ;;
-    i*:PW*:*)
-	echo "$UNAME_MACHINE"-pc-pw32
-	exit ;;
-    *:Interix*:*)
-	case "$UNAME_MACHINE" in
-	    x86)
-		echo i586-pc-interix"$UNAME_RELEASE"
-		exit ;;
-	    authenticamd | genuineintel | EM64T)
-		echo x86_64-unknown-interix"$UNAME_RELEASE"
-		exit ;;
-	    IA64)
-		echo ia64-unknown-interix"$UNAME_RELEASE"
-		exit ;;
-	esac ;;
-    i*:UWIN*:*)
-	echo "$UNAME_MACHINE"-pc-uwin
-	exit ;;
-    amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
-	echo x86_64-pc-cygwin
-	exit ;;
-    prep*:SunOS:5.*:*)
-	echo powerpcle-unknown-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`"
-	exit ;;
-    *:GNU:*:*)
-	# the GNU system
-	echo "`echo "$UNAME_MACHINE"|sed -e 's,[-/].*$,,'`-unknown-$LIBC`echo "$UNAME_RELEASE"|sed -e 's,/.*$,,'`"
-	exit ;;
-    *:GNU/*:*:*)
-	# other systems with GNU libc and userland
-	echo "$UNAME_MACHINE-unknown-`echo "$UNAME_SYSTEM" | sed 's,^[^/]*/,,' | tr "[:upper:]" "[:lower:]"``echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`-$LIBC"
-	exit ;;
-    *:Minix:*:*)
-	echo "$UNAME_MACHINE"-unknown-minix
-	exit ;;
-    aarch64:Linux:*:*)
-	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
-	exit ;;
-    aarch64_be:Linux:*:*)
-	UNAME_MACHINE=aarch64_be
-	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
-	exit ;;
-    alpha:Linux:*:*)
-	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
-	  EV5)   UNAME_MACHINE=alphaev5 ;;
-	  EV56)  UNAME_MACHINE=alphaev56 ;;
-	  PCA56) UNAME_MACHINE=alphapca56 ;;
-	  PCA57) UNAME_MACHINE=alphapca56 ;;
-	  EV6)   UNAME_MACHINE=alphaev6 ;;
-	  EV67)  UNAME_MACHINE=alphaev67 ;;
-	  EV68*) UNAME_MACHINE=alphaev68 ;;
-	esac
-	objdump --private-headers /bin/sh | grep -q ld.so.1
-	if test "$?" = 0 ; then LIBC=gnulibc1 ; fi
-	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
-	exit ;;
-    arc:Linux:*:* | arceb:Linux:*:*)
-	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
-	exit ;;
-    aarch64:Linux:*:*)
-	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
-	exit ;;
-    aarch64_be:Linux:*:*)
-	UNAME_MACHINE=aarch64_be
-	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
-	exit ;;
-    alpha:Linux:*:*)
-	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
-	  EV5)   UNAME_MACHINE=alphaev5 ;;
-	  EV56)  UNAME_MACHINE=alphaev56 ;;
-	  PCA56) UNAME_MACHINE=alphapca56 ;;
-	  PCA57) UNAME_MACHINE=alphapca56 ;;
-	  EV6)   UNAME_MACHINE=alphaev6 ;;
-	  EV67)  UNAME_MACHINE=alphaev67 ;;
-	  EV68*) UNAME_MACHINE=alphaev68 ;;
-	esac
-	objdump --private-headers /bin/sh | grep -q ld.so.1
-	if test "$?" = 0 ; then LIBC=gnulibc1 ; fi
-	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
-	exit ;;
-    arc:Linux:*:* | arceb:Linux:*:*)
-	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
-	exit ;;
-    arm*:Linux:*:*)
-	set_cc_for_build
-	if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
-	    | grep -q __ARM_EABI__
-	then
-	    echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
-	else
-	    if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
-		| grep -q __ARM_PCS_VFP
-	    then
-		echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"eabi
-	    else
-		echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"eabihf
-	    fi
-	fi
-	exit ;;
-    avr32*:Linux:*:*)
-	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
-	exit ;;
-    cris:Linux:*:*)
-	echo "$UNAME_MACHINE"-axis-linux-"$LIBC"
-	exit ;;
-    crisv32:Linux:*:*)
-	echo "$UNAME_MACHINE"-axis-linux-"$LIBC"
-	exit ;;
-    e2k:Linux:*:*)
-	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
-	exit ;;
-    frv:Linux:*:*)
-	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
-	exit ;;
-    hexagon:Linux:*:*)
-	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
-	exit ;;
-    i*86:Linux:*:*)
-	echo "$UNAME_MACHINE"-pc-linux-"$LIBC"
-	exit ;;
-    ia64:Linux:*:*)
-	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
-	exit ;;
-    k1om:Linux:*:*)
-	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
-	exit ;;
-    m32r*:Linux:*:*)
-	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
-	exit ;;
-    m68*:Linux:*:*)
-	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
-	exit ;;
-    mips:Linux:*:* | mips64:Linux:*:*)
-	set_cc_for_build
-	IS_GLIBC=0
-	test x"${LIBC}" = xgnu && IS_GLIBC=1
-	sed 's/^	//' << EOF > "$dummy.c"
-	#undef CPU
-	#undef mips
-	#undef mipsel
-	#undef mips64
-	#undef mips64el
-	#if ${IS_GLIBC} && defined(_ABI64)
-	LIBCABI=gnuabi64
-	#else
-	#if ${IS_GLIBC} && defined(_ABIN32)
-	LIBCABI=gnuabin32
-	#else
-	LIBCABI=${LIBC}
-	#endif
-	#endif
-
-	#if ${IS_GLIBC} && defined(__mips64) && defined(__mips_isa_rev) && __mips_isa_rev>=6
-	CPU=mipsisa64r6
-	#else
-	#if ${IS_GLIBC} && !defined(__mips64) && defined(__mips_isa_rev) && __mips_isa_rev>=6
-	CPU=mipsisa32r6
-	#else
-	#if defined(__mips64)
-	CPU=mips64
-	#else
-	CPU=mips
-	#endif
-	#endif
-	#endif
-
-	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
-	MIPS_ENDIAN=el
-	#else
-	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
-	MIPS_ENDIAN=
-	#else
-	MIPS_ENDIAN=
-	#endif
-	#endif
-EOF
-	eval "`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^CPU\|^MIPS_ENDIAN\|^LIBCABI'`"
-	test "x$CPU" != x && { echo "$CPU${MIPS_ENDIAN}-unknown-linux-$LIBCABI"; exit; }
-	;;
-    mips64el:Linux:*:*)
-	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
-	exit ;;
-    openrisc*:Linux:*:*)
-	echo or1k-unknown-linux-"$LIBC"
-	exit ;;
-    or32:Linux:*:* | or1k*:Linux:*:*)
-	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
-	exit ;;
-    padre:Linux:*:*)
-	echo sparc-unknown-linux-"$LIBC"
-	exit ;;
-    parisc64:Linux:*:* | hppa64:Linux:*:*)
-	echo hppa64-unknown-linux-"$LIBC"
-	exit ;;
-    parisc:Linux:*:* | hppa:Linux:*:*)
-	# Look for CPU level
-	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
-	  PA7*) echo hppa1.1-unknown-linux-"$LIBC" ;;
-	  PA8*) echo hppa2.0-unknown-linux-"$LIBC" ;;
-	  *)    echo hppa-unknown-linux-"$LIBC" ;;
-	esac
-	exit ;;
-    ppc64:Linux:*:*)
-	echo powerpc64-unknown-linux-"$LIBC"
-	exit ;;
-    ppc:Linux:*:*)
-	echo powerpc-unknown-linux-"$LIBC"
-	exit ;;
-    ppc64le:Linux:*:*)
-	echo powerpc64le-unknown-linux-"$LIBC"
-	exit ;;
-    ppcle:Linux:*:*)
-	echo powerpcle-unknown-linux-"$LIBC"
-	exit ;;
-    riscv32:Linux:*:* | riscv64:Linux:*:*)
-	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
-	exit ;;
-    s390:Linux:*:* | s390x:Linux:*:*)
-	echo "$UNAME_MACHINE"-ibm-linux-"$LIBC"
-	exit ;;
-    sh64*:Linux:*:*)
-	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
-	exit ;;
-    sh*:Linux:*:*)
-	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
-	exit ;;
-    sparc:Linux:*:* | sparc64:Linux:*:*)
-	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
-	exit ;;
-    tile*:Linux:*:*)
-	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
-	exit ;;
-    vax:Linux:*:*)
-	echo "$UNAME_MACHINE"-dec-linux-"$LIBC"
-	exit ;;
-    x86_64:Linux:*:*)
-	echo "$UNAME_MACHINE"-pc-linux-"$LIBC"
-	exit ;;
-    xtensa*:Linux:*:*)
-	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
-	exit ;;
-    i*86:DYNIX/ptx:4*:*)
-	# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
-	# earlier versions are messed up and put the nodename in both
-	# sysname and nodename.
-	echo i386-sequent-sysv4
-	exit ;;
-    i*86:UNIX_SV:4.2MP:2.*)
-	# Unixware is an offshoot of SVR4, but it has its own version
-	# number series starting with 2...
-	# I am not positive that other SVR4 systems won't match this,
-	# I just have to hope.  -- rms.
-	# Use sysv4.2uw... so that sysv4* matches it.
-	echo "$UNAME_MACHINE"-pc-sysv4.2uw"$UNAME_VERSION"
-	exit ;;
-    i*86:OS/2:*:*)
-	# If we were able to find `uname', then EMX Unix compatibility
-	# is probably installed.
-	echo "$UNAME_MACHINE"-pc-os2-emx
-	exit ;;
-    i*86:XTS-300:*:STOP)
-	echo "$UNAME_MACHINE"-unknown-stop
-	exit ;;
-    i*86:atheos:*:*)
-	echo "$UNAME_MACHINE"-unknown-atheos
-	exit ;;
-    i*86:syllable:*:*)
-	echo "$UNAME_MACHINE"-pc-syllable
-	exit ;;
-    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*)
-	echo i386-unknown-lynxos"$UNAME_RELEASE"
-	exit ;;
-    i*86:*DOS:*:*)
-	echo "$UNAME_MACHINE"-pc-msdosdjgpp
-	exit ;;
-    i*86:*:4.*:*)
-	UNAME_REL=`echo "$UNAME_RELEASE" | sed 's/\/MP$//'`
-	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
-		echo "$UNAME_MACHINE"-univel-sysv"$UNAME_REL"
-	else
-		echo "$UNAME_MACHINE"-pc-sysv"$UNAME_REL"
-	fi
-	exit ;;
-    i*86:*:5:[678]*)
-	# UnixWare 7.x, OpenUNIX and OpenServer 6.
-	case `/bin/uname -X | grep "^Machine"` in
-	    *486*)	     UNAME_MACHINE=i486 ;;
-	    *Pentium)	     UNAME_MACHINE=i586 ;;
-	    *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
-	esac
-	echo "$UNAME_MACHINE-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}"
-	exit ;;
-    i*86:*:3.2:*)
-	if test -f /usr/options/cb.name; then
-		UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
-		echo "$UNAME_MACHINE"-pc-isc"$UNAME_REL"
-	elif /bin/uname -X 2>/dev/null >/dev/null ; then
-		UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
-		(/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
-		(/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
-			&& UNAME_MACHINE=i586
-		(/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
-			&& UNAME_MACHINE=i686
-		(/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
-			&& UNAME_MACHINE=i686
-		echo "$UNAME_MACHINE"-pc-sco"$UNAME_REL"
-	else
-		echo "$UNAME_MACHINE"-pc-sysv32
-	fi
-	exit ;;
-    pc:*:*:*)
-	# Left here for compatibility:
-	# uname -m prints for DJGPP always 'pc', but it prints nothing about
-	# the processor, so we play safe by assuming i586.
-	# Note: whatever this is, it MUST be the same as what config.sub
-	# prints for the "djgpp" host, or else GDB configure will decide that
-	# this is a cross-build.
-	echo i586-pc-msdosdjgpp
-	exit ;;
-    Intel:Mach:3*:*)
-	echo i386-pc-mach3
-	exit ;;
-    paragon:*:*:*)
-	echo i860-intel-osf1
-	exit ;;
-    i860:*:4.*:*) # i860-SVR4
-	if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
-	  echo i860-stardent-sysv"$UNAME_RELEASE" # Stardent Vistra i860-SVR4
-	else # Add other i860-SVR4 vendors below as they are discovered.
-	  echo i860-unknown-sysv"$UNAME_RELEASE"  # Unknown i860-SVR4
-	fi
-	exit ;;
-    mini*:CTIX:SYS*5:*)
-	# "miniframe"
-	echo m68010-convergent-sysv
-	exit ;;
-    mc68k:UNIX:SYSTEM5:3.51m)
-	echo m68k-convergent-sysv
-	exit ;;
-    M680?0:D-NIX:5.3:*)
-	echo m68k-diab-dnix
-	exit ;;
-    M68*:*:R3V[5678]*:*)
-	test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
-    3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
-	OS_REL=''
-	test -r /etc/.relid \
-	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
-	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-	  && { echo i486-ncr-sysv4.3"$OS_REL"; exit; }
-	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
-	  && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } ;;
-    3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
-	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-	  && { echo i486-ncr-sysv4; exit; } ;;
-    NCR*:*:4.2:* | MPRAS*:*:4.2:*)
-	OS_REL='.3'
-	test -r /etc/.relid \
-	    && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
-	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-	    && { echo i486-ncr-sysv4.3"$OS_REL"; exit; }
-	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
-	    && { echo i586-ncr-sysv4.3"$OS_REL"; exit; }
-	/bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
-	    && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } ;;
-    m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
-	echo m68k-unknown-lynxos"$UNAME_RELEASE"
-	exit ;;
-    mc68030:UNIX_System_V:4.*:*)
-	echo m68k-atari-sysv4
-	exit ;;
-    TSUNAMI:LynxOS:2.*:*)
-	echo sparc-unknown-lynxos"$UNAME_RELEASE"
-	exit ;;
-    rs6000:LynxOS:2.*:*)
-	echo rs6000-unknown-lynxos"$UNAME_RELEASE"
-	exit ;;
-    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*)
-	echo powerpc-unknown-lynxos"$UNAME_RELEASE"
-	exit ;;
-    SM[BE]S:UNIX_SV:*:*)
-	echo mips-dde-sysv"$UNAME_RELEASE"
-	exit ;;
-    RM*:ReliantUNIX-*:*:*)
-	echo mips-sni-sysv4
-	exit ;;
-    RM*:SINIX-*:*:*)
-	echo mips-sni-sysv4
-	exit ;;
-    *:SINIX-*:*:*)
-	if uname -p 2>/dev/null >/dev/null ; then
-		UNAME_MACHINE=`(uname -p) 2>/dev/null`
-		echo "$UNAME_MACHINE"-sni-sysv4
-	else
-		echo ns32k-sni-sysv
-	fi
-	exit ;;
-    PENTIUM:*:4.0*:*)	# Unisys `ClearPath HMP IX 4000' SVR4/MP effort
-			# says <Richard.M.Bartel@ccMail.Census.GOV>
-	echo i586-unisys-sysv4
-	exit ;;
-    *:UNIX_System_V:4*:FTX*)
-	# From Gerald Hewes <hewes@openmarket.com>.
-	# How about differentiating between stratus architectures? -djm
-	echo hppa1.1-stratus-sysv4
-	exit ;;
-    *:*:*:FTX*)
-	# From seanf@swdc.stratus.com.
-	echo i860-stratus-sysv4
-	exit ;;
-    i*86:VOS:*:*)
-	# From Paul.Green@stratus.com.
-	echo "$UNAME_MACHINE"-stratus-vos
-	exit ;;
-    *:VOS:*:*)
-	# From Paul.Green@stratus.com.
-	echo hppa1.1-stratus-vos
-	exit ;;
-    mc68*:A/UX:*:*)
-	echo m68k-apple-aux"$UNAME_RELEASE"
-	exit ;;
-    news*:NEWS-OS:6*:*)
-	echo mips-sony-newsos6
-	exit ;;
-    R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
-	if [ -d /usr/nec ]; then
-		echo mips-nec-sysv"$UNAME_RELEASE"
-	else
-		echo mips-unknown-sysv"$UNAME_RELEASE"
-	fi
-	exit ;;
-    BeBox:BeOS:*:*)	# BeOS running on hardware made by Be, PPC only.
-	echo powerpc-be-beos
-	exit ;;
-    BeMac:BeOS:*:*)	# BeOS running on Mac or Mac clone, PPC only.
-	echo powerpc-apple-beos
-	exit ;;
-    BePC:BeOS:*:*)	# BeOS running on Intel PC compatible.
-	echo i586-pc-beos
-	exit ;;
-    BePC:Haiku:*:*)	# Haiku running on Intel PC compatible.
-	echo i586-pc-haiku
-	exit ;;
-    x86_64:Haiku:*:*)
-	echo x86_64-unknown-haiku
-	exit ;;
-    SX-4:SUPER-UX:*:*)
-	echo sx4-nec-superux"$UNAME_RELEASE"
-	exit ;;
-    SX-5:SUPER-UX:*:*)
-	echo sx5-nec-superux"$UNAME_RELEASE"
-	exit ;;
-    SX-6:SUPER-UX:*:*)
-	echo sx6-nec-superux"$UNAME_RELEASE"
-	exit ;;
-    SX-7:SUPER-UX:*:*)
-	echo sx7-nec-superux"$UNAME_RELEASE"
-	exit ;;
-    SX-8:SUPER-UX:*:*)
-	echo sx8-nec-superux"$UNAME_RELEASE"
-	exit ;;
-    SX-8R:SUPER-UX:*:*)
-	echo sx8r-nec-superux"$UNAME_RELEASE"
-	exit ;;
-    SX-ACE:SUPER-UX:*:*)
-	echo sxace-nec-superux"$UNAME_RELEASE"
-	exit ;;
-    Power*:Rhapsody:*:*)
-	echo powerpc-apple-rhapsody"$UNAME_RELEASE"
-	exit ;;
-    *:Rhapsody:*:*)
-	echo "$UNAME_MACHINE"-apple-rhapsody"$UNAME_RELEASE"
-	exit ;;
-    *:Darwin:*:*)
-	UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
-	set_cc_for_build
-	if test "$UNAME_PROCESSOR" = unknown ; then
-	    UNAME_PROCESSOR=powerpc
-	fi
-	if test "`echo "$UNAME_RELEASE" | sed -e 's/\..*//'`" -le 10 ; then
-	    if [ "$CC_FOR_BUILD" != no_compiler_found ]; then
-		if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
-		       (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \
-		       grep IS_64BIT_ARCH >/dev/null
-		then
-		    case $UNAME_PROCESSOR in
-			i386) UNAME_PROCESSOR=x86_64 ;;
-			powerpc) UNAME_PROCESSOR=powerpc64 ;;
-		    esac
-		fi
-		# On 10.4-10.6 one might compile for PowerPC via gcc -arch ppc
-		if (echo '#ifdef __POWERPC__'; echo IS_PPC; echo '#endif') | \
-		       (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \
-		       grep IS_PPC >/dev/null
-		then
-		    UNAME_PROCESSOR=powerpc
-		fi
-	    fi
-	elif test "$UNAME_PROCESSOR" = i386 ; then
-	    # Avoid executing cc on OS X 10.9, as it ships with a stub
-	    # that puts up a graphical alert prompting to install
-	    # developer tools.  Any system running Mac OS X 10.7 or
-	    # later (Darwin 11 and later) is required to have a 64-bit
-	    # processor. This is not true of the ARM version of Darwin
-	    # that Apple uses in portable devices.
-	    UNAME_PROCESSOR=x86_64
-	fi
-	echo "$UNAME_PROCESSOR"-apple-darwin"$UNAME_RELEASE"
-	exit ;;
-    *:procnto*:*:* | *:QNX:[0123456789]*:*)
-	UNAME_PROCESSOR=`uname -p`
-	if test "$UNAME_PROCESSOR" = x86; then
-		UNAME_PROCESSOR=i386
-		UNAME_MACHINE=pc
-	fi
-	echo "$UNAME_PROCESSOR"-"$UNAME_MACHINE"-nto-qnx"$UNAME_RELEASE"
-	exit ;;
-    *:QNX:*:4*)
-	echo i386-pc-qnx
-	exit ;;
-    NEO-*:NONSTOP_KERNEL:*:*)
-	echo neo-tandem-nsk"$UNAME_RELEASE"
-	exit ;;
-    NSE-*:NONSTOP_KERNEL:*:*)
-	echo nse-tandem-nsk"$UNAME_RELEASE"
-	exit ;;
-    NSR-*:NONSTOP_KERNEL:*:*)
-	echo nsr-tandem-nsk"$UNAME_RELEASE"
-	exit ;;
-    NSV-*:NONSTOP_KERNEL:*:*)
-	echo nsv-tandem-nsk"$UNAME_RELEASE"
-	exit ;;
-    NSX-*:NONSTOP_KERNEL:*:*)
-	echo nsx-tandem-nsk"$UNAME_RELEASE"
-	exit ;;
-    *:NonStop-UX:*:*)
-	echo mips-compaq-nonstopux
-	exit ;;
-    BS2000:POSIX*:*:*)
-	echo bs2000-siemens-sysv
-	exit ;;
-    DS/*:UNIX_System_V:*:*)
-	echo "$UNAME_MACHINE"-"$UNAME_SYSTEM"-"$UNAME_RELEASE"
-	exit ;;
-    *:Plan9:*:*)
-	# "uname -m" is not consistent, so use $cputype instead. 386
-	# is converted to i386 for consistency with other x86
-	# operating systems.
-	# shellcheck disable=SC2154
-	if test "$cputype" = 386; then
-	    UNAME_MACHINE=i386
-	else
-	    UNAME_MACHINE="$cputype"
-	fi
-	echo "$UNAME_MACHINE"-unknown-plan9
-	exit ;;
-    *:TOPS-10:*:*)
-	echo pdp10-unknown-tops10
-	exit ;;
-    *:TENEX:*:*)
-	echo pdp10-unknown-tenex
-	exit ;;
-    KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
-	echo pdp10-dec-tops20
-	exit ;;
-    XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
-	echo pdp10-xkl-tops20
-	exit ;;
-    *:TOPS-20:*:*)
-	echo pdp10-unknown-tops20
-	exit ;;
-    *:ITS:*:*)
-	echo pdp10-unknown-its
-	exit ;;
-    SEI:*:*:SEIUX)
-	echo mips-sei-seiux"$UNAME_RELEASE"
-	exit ;;
-    *:DragonFly:*:*)
-	echo "$UNAME_MACHINE"-unknown-dragonfly"`echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`"
-	exit ;;
-    *:*VMS:*:*)
-	UNAME_MACHINE=`(uname -p) 2>/dev/null`
-	case "$UNAME_MACHINE" in
-	    A*) echo alpha-dec-vms ; exit ;;
-	    I*) echo ia64-dec-vms ; exit ;;
-	    V*) echo vax-dec-vms ; exit ;;
-	esac ;;
-    *:XENIX:*:SysV)
-	echo i386-pc-xenix
-	exit ;;
-    i*86:skyos:*:*)
-	echo "$UNAME_MACHINE"-pc-skyos"`echo "$UNAME_RELEASE" | sed -e 's/ .*$//'`"
-	exit ;;
-    i*86:rdos:*:*)
-	echo "$UNAME_MACHINE"-pc-rdos
-	exit ;;
-    i*86:AROS:*:*)
-	echo "$UNAME_MACHINE"-pc-aros
-	exit ;;
-    x86_64:VMkernel:*:*)
-	echo "$UNAME_MACHINE"-unknown-esx
-	exit ;;
-    amd64:Isilon\ OneFS:*:*)
-	echo x86_64-unknown-onefs
-	exit ;;
-    *:Unleashed:*:*)
-	echo "$UNAME_MACHINE"-unknown-unleashed"$UNAME_RELEASE"
-	exit ;;
-    i*86:AROS:*:*)
-	echo "$UNAME_MACHINE"-pc-aros
-	exit ;;
-    x86_64:VMkernel:*:*)
-	echo "$UNAME_MACHINE"-unknown-esx
-	exit ;;
-    amd64:Isilon\ OneFS:*:*)
-	echo x86_64-unknown-onefs
-	exit ;;
-esac
-
-# No uname command or uname output not recognized.
-set_cc_for_build
-cat > "$dummy.c" <<EOF
-#ifdef _SEQUENT_
-#include <sys/types.h>
-#include <sys/utsname.h>
-#endif
-#if defined(ultrix) || defined(_ultrix) || defined(__ultrix) || defined(__ultrix__)
-#if defined (vax) || defined (__vax) || defined (__vax__) || defined(mips) || defined(__mips) || defined(__mips__) || defined(MIPS) || defined(__MIPS__)
-#include <signal.h>
-#if defined(_SIZE_T_) || defined(SIGLOST)
-#include <sys/utsname.h>
-#endif
-#endif
-#endif
-main ()
-{
-#if defined (sony)
-#if defined (MIPSEB)
-  /* BFD wants "bsd" instead of "newsos".  Perhaps BFD should be changed,
-     I don't know....  */
-  printf ("mips-sony-bsd\n"); exit (0);
-#else
-#include <sys/param.h>
-  printf ("m68k-sony-newsos%s\n",
-#ifdef NEWSOS4
-  "4"
-#else
-  ""
-#endif
-  ); exit (0);
-#endif
-#endif
-
-#if defined (NeXT)
-#if !defined (__ARCHITECTURE__)
-#define __ARCHITECTURE__ "m68k"
-#endif
-  int version;
-  version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
-  if (version < 4)
-    printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
-  else
-    printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
-  exit (0);
-#endif
-
-#if defined (MULTIMAX) || defined (n16)
-#if defined (UMAXV)
-  printf ("ns32k-encore-sysv\n"); exit (0);
-#else
-#if defined (CMU)
-  printf ("ns32k-encore-mach\n"); exit (0);
-#else
-  printf ("ns32k-encore-bsd\n"); exit (0);
-#endif
-#endif
-#endif
-
-#if defined (__386BSD__)
-  printf ("i386-pc-bsd\n"); exit (0);
-#endif
-
-#if defined (sequent)
-#if defined (i386)
-  printf ("i386-sequent-dynix\n"); exit (0);
-#endif
-#if defined (ns32000)
-  printf ("ns32k-sequent-dynix\n"); exit (0);
-#endif
-#endif
-
-#if defined (_SEQUENT_)
-  struct utsname un;
-
-  uname(&un);
-  if (strncmp(un.version, "V2", 2) == 0) {
-    printf ("i386-sequent-ptx2\n"); exit (0);
-  }
-  if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
-    printf ("i386-sequent-ptx1\n"); exit (0);
-  }
-  printf ("i386-sequent-ptx\n"); exit (0);
-#endif
-
-#if defined (vax)
-#if !defined (ultrix)
-#include <sys/param.h>
-#if defined (BSD)
-#if BSD == 43
-  printf ("vax-dec-bsd4.3\n"); exit (0);
-#else
-#if BSD == 199006
-  printf ("vax-dec-bsd4.3reno\n"); exit (0);
-#else
-  printf ("vax-dec-bsd\n"); exit (0);
-#endif
-#endif
-#else
-  printf ("vax-dec-bsd\n"); exit (0);
-#endif
-#else
-#if defined(_SIZE_T_) || defined(SIGLOST)
-  struct utsname un;
-  uname (&un);
-  printf ("vax-dec-ultrix%s\n", un.release); exit (0);
-#else
-  printf ("vax-dec-ultrix\n"); exit (0);
-#endif
-#endif
-#endif
-#if defined(ultrix) || defined(_ultrix) || defined(__ultrix) || defined(__ultrix__)
-#if defined(mips) || defined(__mips) || defined(__mips__) || defined(MIPS) || defined(__MIPS__)
-#if defined(_SIZE_T_) || defined(SIGLOST)
-  struct utsname *un;
-  uname (&un);
-  printf ("mips-dec-ultrix%s\n", un.release); exit (0);
-#else
-  printf ("mips-dec-ultrix\n"); exit (0);
-#endif
-#endif
-#endif
-
-case "$UNAME_MACHINE:$UNAME_SYSTEM" in
-    mips:Linux | mips64:Linux)
-	# If we got here on MIPS GNU/Linux, output extra information.
-	cat >&2 <<EOF
-
-NOTE: MIPS GNU/Linux systems require a C compiler to fully recognize
-the system type. Please install a C compiler and try again.
-EOF
-
-$CC_FOR_BUILD -o "$dummy" "$dummy.c" 2>/dev/null && SYSTEM_NAME=`$dummy` &&
-	{ echo "$SYSTEM_NAME"; exit; }
-
-# Apollos put the system type in the environment.
-test -d /usr/apollo && { echo "$ISP-apollo-$SYSTYPE"; exit; }
-
-echo "$0: unable to guess system type" >&2
-
-case "$UNAME_MACHINE:$UNAME_SYSTEM" in
-    mips:Linux | mips64:Linux)
-	# If we got here on MIPS GNU/Linux, output extra information.
-	cat >&2 <<EOF
-
-NOTE: MIPS GNU/Linux systems require a C compiler to fully recognize
-the system type. Please install a C compiler and try again.
-EOF
-	;;
-esac
-
-cat >&2 <<EOF
-
-This script (version $timestamp), has failed to recognize the
-operating system you are using. If your script is old, overwrite *all*
-copies of config.guess and config.sub with the latest versions from:
-
-  https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess
-and
-  https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub
-
-If $0 has already been updated, send the following data and any
-information you think might be pertinent to config-patches@gnu.org to
-provide the necessary information to handle your system.
-
-config.guess timestamp = $timestamp
-
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
-/bin/uname -X     = `(/bin/uname -X) 2>/dev/null`
-
-hostinfo               = `(hostinfo) 2>/dev/null`
-/bin/universe          = `(/bin/universe) 2>/dev/null`
-/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null`
-/bin/arch              = `(/bin/arch) 2>/dev/null`
-/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
-
-UNAME_MACHINE = "$UNAME_MACHINE"
-UNAME_RELEASE = "$UNAME_RELEASE"
-UNAME_SYSTEM  = "$UNAME_SYSTEM"
-UNAME_VERSION = "$UNAME_VERSION"
-EOF
-
-exit 1
-
-# Local variables:
-# eval: (add-hook 'before-save-hook 'time-stamp)
-# time-stamp-start: "timestamp='"
-# time-stamp-format: "%:y-%02m-%02d"
-# time-stamp-end: "'"
-# End:
diff --git a/readline/support/config.rpath b/readline/support/config.rpath
deleted file mode 100755
index fc5913d..0000000
--- a/readline/support/config.rpath
+++ /dev/null
@@ -1,684 +0,0 @@
-#! /bin/sh
-# Output a system dependent set of variables, describing how to set the
-# run time search path of shared libraries in an executable.
-#
-#   Copyright 1996-2018 Free Software Foundation, Inc.
-#   Taken from GNU libtool, 2001
-#   Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-#   This file is free software; the Free Software Foundation gives
-#   unlimited permission to copy and/or distribute it, with or without
-#   modifications, as long as this notice is preserved.
-#
-# The first argument passed to this file is the canonical host specification,
-#    CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
-# or
-#    CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
-# The environment variables CC, GCC, LDFLAGS, LD, with_gnu_ld
-# should be set by the caller.
-#
-# The set of defined variables is at the end of this script.
-
-# Known limitations:
-# - On IRIX 6.5 with CC="cc", the run time search patch must not be longer
-#   than 256 bytes, otherwise the compiler driver will dump core. The only
-#   known workaround is to choose shorter directory names for the build
-#   directory and/or the installation directory.
-
-# All known linkers require a '.a' archive for static linking (except MSVC,
-# which needs '.lib').
-libext=a
-shrext=.so
-
-host="$1"
-host_cpu=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-
-# Code taken from libtool.m4's _LT_CC_BASENAME.
-
-for cc_temp in $CC""; do
-  case $cc_temp in
-    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`echo "$cc_temp" | sed -e 's%^.*/%%'`
-
-# Code taken from libtool.m4's _LT_COMPILER_PIC.
-
-wl=
-if test "$GCC" = yes; then
-  wl='-Wl,'
-else
-  case "$host_os" in
-    aix*)
-      wl='-Wl,'
-      ;;
-    mingw* | cygwin* | pw32* | os2* | cegcc*)
-      ;;
-    hpux9* | hpux10* | hpux11*)
-      wl='-Wl,'
-      ;;
-    irix5* | irix6* | nonstopux*)
-      wl='-Wl,'
-      ;;
-    linux* | k*bsd*-gnu | kopensolaris*-gnu)
-      case $cc_basename in
-        ecc*)
-          wl='-Wl,'
-          ;;
-        icc* | ifort*)
-          wl='-Wl,'
-          ;;
-        lf95*)
-          wl='-Wl,'
-          ;;
-        nagfor*)
-          wl='-Wl,-Wl,,'
-          ;;
-        pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
-          wl='-Wl,'
-          ;;
-        ccc*)
-          wl='-Wl,'
-          ;;
-        xl* | bgxl* | bgf* | mpixl*)
-          wl='-Wl,'
-          ;;
-        como)
-          wl='-lopt='
-          ;;
-        *)
-          case `$CC -V 2>&1 | sed 5q` in
-            *Sun\ F* | *Sun*Fortran*)
-              wl=
-              ;;
-            *Sun\ C*)
-              wl='-Wl,'
-              ;;
-          esac
-          ;;
-      esac
-      ;;
-    newsos6)
-      ;;
-    *nto* | *qnx*)
-      ;;
-    osf3* | osf4* | osf5*)
-      wl='-Wl,'
-      ;;
-    rdos*)
-      ;;
-    solaris*)
-      case $cc_basename in
-        f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
-          wl='-Qoption ld '
-          ;;
-        *)
-          wl='-Wl,'
-          ;;
-      esac
-      ;;
-    sunos4*)
-      wl='-Qoption ld '
-      ;;
-    sysv4 | sysv4.2uw2* | sysv4.3*)
-      wl='-Wl,'
-      ;;
-    sysv4*MP*)
-      ;;
-    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-      wl='-Wl,'
-      ;;
-    unicos*)
-      wl='-Wl,'
-      ;;
-    uts4*)
-      ;;
-  esac
-fi
-
-# Code taken from libtool.m4's _LT_LINKER_SHLIBS.
-
-hardcode_libdir_flag_spec=
-hardcode_libdir_separator=
-hardcode_direct=no
-hardcode_minus_L=no
-
-case "$host_os" in
-  cygwin* | mingw* | pw32* | cegcc*)
-    # FIXME: the MSVC++ port hasn't been tested in a loooong time
-    # When not using gcc, we currently assume that we are using
-    # Microsoft Visual C++.
-    if test "$GCC" != yes; then
-      with_gnu_ld=no
-    fi
-    ;;
-  interix*)
-    # we just hope/assume this is gcc and not c89 (= MSVC++)
-    with_gnu_ld=yes
-    ;;
-  openbsd*)
-    with_gnu_ld=no
-    ;;
-esac
-
-ld_shlibs=yes
-if test "$with_gnu_ld" = yes; then
-  # Set some defaults for GNU ld with shared library support. These
-  # are reset later if shared libraries are not supported. Putting them
-  # here allows them to be overridden if necessary.
-  # Unlike libtool, we use -rpath here, not --rpath, since the documented
-  # option of GNU ld is called -rpath, not --rpath.
-  hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-  case "$host_os" in
-    aix[3-9]*)
-      # On AIX/PPC, the GNU linker is very broken
-      if test "$host_cpu" != ia64; then
-        ld_shlibs=no
-      fi
-      ;;
-    amigaos*)
-      case "$host_cpu" in
-        powerpc)
-          ;;
-        m68k)
-          hardcode_libdir_flag_spec='-L$libdir'
-          hardcode_minus_L=yes
-          ;;
-      esac
-      ;;
-    beos*)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-        :
-      else
-        ld_shlibs=no
-      fi
-      ;;
-    cygwin* | mingw* | pw32* | cegcc*)
-      # hardcode_libdir_flag_spec is actually meaningless, as there is
-      # no search path for DLLs.
-      hardcode_libdir_flag_spec='-L$libdir'
-      if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-        :
-      else
-        ld_shlibs=no
-      fi
-      ;;
-    haiku*)
-      ;;
-    interix[3-9]*)
-      hardcode_direct=no
-      hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-      ;;
-    gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-        :
-      else
-        ld_shlibs=no
-      fi
-      ;;
-    netbsd*)
-      ;;
-    solaris*)
-      if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
-        ld_shlibs=no
-      elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-        :
-      else
-        ld_shlibs=no
-      fi
-      ;;
-    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
-      case `$LD -v 2>&1` in
-        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
-          ld_shlibs=no
-          ;;
-        *)
-          if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-            hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
-          else
-            ld_shlibs=no
-          fi
-          ;;
-      esac
-      ;;
-    sunos4*)
-      hardcode_direct=yes
-      ;;
-    *)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-        :
-      else
-        ld_shlibs=no
-      fi
-      ;;
-  esac
-  if test "$ld_shlibs" = no; then
-    hardcode_libdir_flag_spec=
-  fi
-else
-  case "$host_os" in
-    aix3*)
-      # Note: this linker hardcodes the directories in LIBPATH if there
-      # are no directories specified by -L.
-      hardcode_minus_L=yes
-      if test "$GCC" = yes; then
-        # Neither direct hardcoding nor static linking is supported with a
-        # broken collect2.
-        hardcode_direct=unsupported
-      fi
-      ;;
-    aix[4-9]*)
-      if test "$host_cpu" = ia64; then
-        # On IA64, the linker does run time linking by default, so we don't
-        # have to do anything special.
-        aix_use_runtimelinking=no
-      else
-        aix_use_runtimelinking=no
-        # Test if we are trying to use run time linking or normal
-        # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-        # need to do runtime linking.
-        case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
-          for ld_flag in $LDFLAGS; do
-            if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-              aix_use_runtimelinking=yes
-              break
-            fi
-          done
-          ;;
-        esac
-      fi
-      hardcode_direct=yes
-      hardcode_libdir_separator=':'
-      if test "$GCC" = yes; then
-        case $host_os in aix4.[012]|aix4.[012].*)
-          collect2name=`${CC} -print-prog-name=collect2`
-          if test -f "$collect2name" && \
-            strings "$collect2name" | grep resolve_lib_name >/dev/null
-          then
-            # We have reworked collect2
-            :
-          else
-            # We have old collect2
-            hardcode_direct=unsupported
-            hardcode_minus_L=yes
-            hardcode_libdir_flag_spec='-L$libdir'
-            hardcode_libdir_separator=
-          fi
-          ;;
-        esac
-      fi
-      # Begin _LT_AC_SYS_LIBPATH_AIX.
-      echo 'int main () { return 0; }' > conftest.c
-      ${CC} ${LDFLAGS} conftest.c -o conftest
-      aix_libpath=`dump -H conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`
-      if test -z "$aix_libpath"; then
-        aix_libpath=`dump -HX64 conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`
-      fi
-      if test -z "$aix_libpath"; then
-        aix_libpath="/usr/lib:/lib"
-      fi
-      rm -f conftest.c conftest
-      # End _LT_AC_SYS_LIBPATH_AIX.
-      if test "$aix_use_runtimelinking" = yes; then
-        hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
-      else
-        if test "$host_cpu" = ia64; then
-          hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
-        else
-          hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
-        fi
-      fi
-      ;;
-    amigaos*)
-      case "$host_cpu" in
-        powerpc)
-          ;;
-        m68k)
-          hardcode_libdir_flag_spec='-L$libdir'
-          hardcode_minus_L=yes
-          ;;
-      esac
-      ;;
-    bsdi[45]*)
-      ;;
-    cygwin* | mingw* | pw32* | cegcc*)
-      # When not using gcc, we currently assume that we are using
-      # Microsoft Visual C++.
-      # hardcode_libdir_flag_spec is actually meaningless, as there is
-      # no search path for DLLs.
-      hardcode_libdir_flag_spec=' '
-      libext=lib
-      ;;
-    darwin* | rhapsody*)
-      hardcode_direct=no
-      if { case $cc_basename in ifort*) true;; *) test "$GCC" = yes;; esac; }; then
-        :
-      else
-        ld_shlibs=no
-      fi
-      ;;
-    dgux*)
-      hardcode_libdir_flag_spec='-L$libdir'
-      ;;
-    freebsd2.[01]*)
-      hardcode_direct=yes
-      hardcode_minus_L=yes
-      ;;
-    freebsd* | dragonfly*)
-      hardcode_libdir_flag_spec='-R$libdir'
-      hardcode_direct=yes
-      ;;
-    hpux9*)
-      hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-      hardcode_libdir_separator=:
-      hardcode_direct=yes
-      # hardcode_minus_L: Not really in the search PATH,
-      # but as the default location of the library.
-      hardcode_minus_L=yes
-      ;;
-    hpux10*)
-      if test "$with_gnu_ld" = no; then
-        hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-        hardcode_libdir_separator=:
-        hardcode_direct=yes
-        # hardcode_minus_L: Not really in the search PATH,
-        # but as the default location of the library.
-        hardcode_minus_L=yes
-      fi
-      ;;
-    hpux11*)
-      if test "$with_gnu_ld" = no; then
-        hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-        hardcode_libdir_separator=:
-        case $host_cpu in
-          hppa*64*|ia64*)
-            hardcode_direct=no
-            ;;
-          *)
-            hardcode_direct=yes
-            # hardcode_minus_L: Not really in the search PATH,
-            # but as the default location of the library.
-            hardcode_minus_L=yes
-            ;;
-        esac
-      fi
-      ;;
-    irix5* | irix6* | nonstopux*)
-      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator=:
-      ;;
-    netbsd*)
-      hardcode_libdir_flag_spec='-R$libdir'
-      hardcode_direct=yes
-      ;;
-    newsos6)
-      hardcode_direct=yes
-      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator=:
-      ;;
-    *nto* | *qnx*)
-      ;;
-    openbsd*)
-      if test -f /usr/libexec/ld.so; then
-        hardcode_direct=yes
-        if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-          hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-        else
-          case "$host_os" in
-            openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
-              hardcode_libdir_flag_spec='-R$libdir'
-              ;;
-            *)
-              hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-              ;;
-          esac
-        fi
-      else
-        ld_shlibs=no
-      fi
-      ;;
-    os2*)
-      hardcode_libdir_flag_spec='-L$libdir'
-      hardcode_minus_L=yes
-      ;;
-    osf3*)
-      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator=:
-      ;;
-    osf4* | osf5*)
-      if test "$GCC" = yes; then
-        hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-      else
-        # Both cc and cxx compiler support -rpath directly
-        hardcode_libdir_flag_spec='-rpath $libdir'
-      fi
-      hardcode_libdir_separator=:
-      ;;
-    solaris*)
-      hardcode_libdir_flag_spec='-R$libdir'
-      ;;
-    sunos4*)
-      hardcode_libdir_flag_spec='-L$libdir'
-      hardcode_direct=yes
-      hardcode_minus_L=yes
-      ;;
-    sysv4)
-      case $host_vendor in
-        sni)
-          hardcode_direct=yes # is this really true???
-          ;;
-        siemens)
-          hardcode_direct=no
-          ;;
-        motorola)
-          hardcode_direct=no #Motorola manual says yes, but my tests say they lie
-          ;;
-      esac
-      ;;
-    sysv4.3*)
-      ;;
-    sysv4*MP*)
-      if test -d /usr/nec; then
-        ld_shlibs=yes
-      fi
-      ;;
-    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
-      ;;
-    sysv5* | sco3.2v5* | sco5v6*)
-      hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
-      hardcode_libdir_separator=':'
-      ;;
-    uts4*)
-      hardcode_libdir_flag_spec='-L$libdir'
-      ;;
-    *)
-      ld_shlibs=no
-      ;;
-  esac
-fi
-
-# Check dynamic linker characteristics
-# Code taken from libtool.m4's _LT_SYS_DYNAMIC_LINKER.
-# Unlike libtool.m4, here we don't care about _all_ names of the library, but
-# only about the one the linker finds when passed -lNAME. This is the last
-# element of library_names_spec in libtool.m4, or possibly two of them if the
-# linker has special search rules.
-library_names_spec=      # the last element of library_names_spec in libtool.m4
-libname_spec='lib$name'
-case "$host_os" in
-  aix3*)
-    library_names_spec='$libname.a'
-    ;;
-  aix[4-9]*)
-    library_names_spec='$libname$shrext'
-    ;;
-  amigaos*)
-    case "$host_cpu" in
-      powerpc*)
-        library_names_spec='$libname$shrext' ;;
-      m68k)
-        library_names_spec='$libname.a' ;;
-    esac
-    ;;
-  beos*)
-    library_names_spec='$libname$shrext'
-    ;;
-  bsdi[45]*)
-    library_names_spec='$libname$shrext'
-    ;;
-  cygwin* | mingw* | pw32* | cegcc*)
-    shrext=.dll
-    library_names_spec='$libname.dll.a $libname.lib'
-    ;;
-  darwin* | rhapsody*)
-    shrext=.dylib
-    library_names_spec='$libname$shrext'
-    ;;
-  dgux*)
-    library_names_spec='$libname$shrext'
-    ;;
-  freebsd[23].*)
-    library_names_spec='$libname$shrext$versuffix'
-    ;;
-  freebsd* | dragonfly*)
-    library_names_spec='$libname$shrext'
-    ;;
-  gnu*)
-    library_names_spec='$libname$shrext'
-    ;;
-  haiku*)
-    library_names_spec='$libname$shrext'
-    ;;
-  hpux9* | hpux10* | hpux11*)
-    case $host_cpu in
-      ia64*)
-        shrext=.so
-        ;;
-      hppa*64*)
-        shrext=.sl
-        ;;
-      *)
-        shrext=.sl
-        ;;
-    esac
-    library_names_spec='$libname$shrext'
-    ;;
-  interix[3-9]*)
-    library_names_spec='$libname$shrext'
-    ;;
-  irix5* | irix6* | nonstopux*)
-    library_names_spec='$libname$shrext'
-    case "$host_os" in
-      irix5* | nonstopux*)
-        libsuff= shlibsuff=
-        ;;
-      *)
-        case $LD in
-          *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= ;;
-          *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 ;;
-          *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 ;;
-          *) libsuff= shlibsuff= ;;
-        esac
-        ;;
-    esac
-    ;;
-  linux*oldld* | linux*aout* | linux*coff*)
-    ;;
-  linux* | k*bsd*-gnu | kopensolaris*-gnu)
-    library_names_spec='$libname$shrext'
-    ;;
-  knetbsd*-gnu)
-    library_names_spec='$libname$shrext'
-    ;;
-  netbsd*)
-    library_names_spec='$libname$shrext'
-    ;;
-  newsos6)
-    library_names_spec='$libname$shrext'
-    ;;
-  *nto* | *qnx*)
-    library_names_spec='$libname$shrext'
-    ;;
-  openbsd*)
-    library_names_spec='$libname$shrext$versuffix'
-    ;;
-  os2*)
-    libname_spec='$name'
-    shrext=.dll
-    library_names_spec='$libname.a'
-    ;;
-  osf3* | osf4* | osf5*)
-    library_names_spec='$libname$shrext'
-    ;;
-  rdos*)
-    ;;
-  solaris*)
-    library_names_spec='$libname$shrext'
-    ;;
-  sunos4*)
-    library_names_spec='$libname$shrext$versuffix'
-    ;;
-  sysv4 | sysv4.3*)
-    library_names_spec='$libname$shrext'
-    ;;
-  sysv4*MP*)
-    library_names_spec='$libname$shrext'
-    ;;
-  sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-    library_names_spec='$libname$shrext'
-    ;;
-  tpf*)
-    library_names_spec='$libname$shrext'
-    ;;
-  uts4*)
-    library_names_spec='$libname$shrext'
-    ;;
-esac
-
-sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
-escaped_wl=`echo "X$wl" | sed -e 's/^X//' -e "$sed_quote_subst"`
-shlibext=`echo "$shrext" | sed -e 's,^\.,,'`
-escaped_libname_spec=`echo "X$libname_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
-escaped_library_names_spec=`echo "X$library_names_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
-escaped_hardcode_libdir_flag_spec=`echo "X$hardcode_libdir_flag_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
-
-LC_ALL=C sed -e 's/^\([a-zA-Z0-9_]*\)=/acl_cv_\1=/' <<EOF
-
-# How to pass a linker flag through the compiler.
-wl="$escaped_wl"
-
-# Static library suffix (normally "a").
-libext="$libext"
-
-# Shared library suffix (normally "so").
-shlibext="$shlibext"
-
-# Format of library name prefix.
-libname_spec="$escaped_libname_spec"
-
-# Library names that the linker finds when passed -lNAME.
-library_names_spec="$escaped_library_names_spec"
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec="$escaped_hardcode_libdir_flag_spec"
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator="$hardcode_libdir_separator"
-
-# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct="$hardcode_direct"
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L="$hardcode_minus_L"
-
-EOF
diff --git a/readline/support/config.sub b/readline/support/config.sub
deleted file mode 100755
index 22d774e..0000000
--- a/readline/support/config.sub
+++ /dev/null
@@ -1,1801 +0,0 @@
-#! /bin/sh
-# Configuration validation subroutine script.
-#   Copyright 1992-2019 Free Software Foundation, Inc.
-
-timestamp='2019-08-04'
-
-# This file is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, see <https://www.gnu.org/licenses/>.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that
-# program.  This Exception is an additional permission under section 7
-# of the GNU General Public License, version 3 ("GPLv3").
-
-
-# Please send patches to <config-patches@gnu.org>.
-#
-# Configuration subroutine to validate and canonicalize a configuration type.
-# Supply the specified configuration type as an argument.
-# If it is invalid, we print an error message on stderr and exit with code 1.
-# Otherwise, we print the canonical config type on stdout and succeed.
-
-# You can get the latest version of this script from:
-# https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub
-
-# This file is supposed to be the same for all GNU packages
-# and recognize all the CPU types, system types and aliases
-# that are meaningful with *any* GNU software.
-# Each package is responsible for reporting which valid configurations
-# it does not support.  The user should be able to distinguish
-# a failure to support a valid configuration from a meaningless
-# configuration.
-
-# The goal of this file is to map all the various variations of a given
-# machine specification into a single specification in the form:
-#	CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
-# or in some cases, the newer four-part form:
-#	CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
-# It is wrong to echo any other type of specification.
-
-me=`echo "$0" | sed -e 's,.*/,,'`
-
-usage="\
-Usage: $0 [OPTION] CPU-MFR-OPSYS or ALIAS
-
-Canonicalize a configuration name.
-
-Options:
-  -h, --help         print this help, then exit
-  -t, --time-stamp   print date of last modification, then exit
-  -v, --version      print version number, then exit
-
-Report bugs and patches to <config-patches@gnu.org>."
-
-version="\
-GNU config.sub ($timestamp)
-
-Copyright 1992-2019 Free Software Foundation, Inc.
-
-This is free software; see the source for copying conditions.  There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-
-help="
-Try \`$me --help' for more information."
-
-# Parse command line
-while test $# -gt 0 ; do
-  case $1 in
-    --time-stamp | --time* | -t )
-       echo "$timestamp" ; exit ;;
-    --version | -v )
-       echo "$version" ; exit ;;
-    --help | --h* | -h )
-       echo "$usage"; exit ;;
-    -- )     # Stop option processing
-       shift; break ;;
-    - )	# Use stdin as input.
-       break ;;
-    -* )
-       echo "$me: invalid option $1$help" >&2
-       exit 1 ;;
-
-    *local*)
-       # First pass through any local machine types.
-       echo "$1"
-       exit ;;
-
-    * )
-       break ;;
-  esac
-done
-
-case $# in
- 0) echo "$me: missing argument$help" >&2
-    exit 1;;
- 1) ;;
- *) echo "$me: too many arguments$help" >&2
-    exit 1;;
-esac
-
-# Split fields of configuration type
-# shellcheck disable=SC2162
-IFS="-" read field1 field2 field3 field4 <<EOF
-$1
-EOF
-
-# Separate into logical components for further validation
-case $1 in
-	*-*-*-*-*)
-		echo Invalid configuration \`"$1"\': more than four components >&2
-		exit 1
-		;;
-	*-*-*-*)
-		basic_machine=$field1-$field2
-		os=$field3-$field4
-		;;
-	*-*-*)
-		# Ambiguous whether COMPANY is present, or skipped and KERNEL-OS is two
-		# parts
-		maybe_os=$field2-$field3
-		case $maybe_os in
-			nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc \
-			| linux-newlib* | linux-musl* | linux-uclibc* | uclinux-uclibc* \
-			| uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* \
-			| netbsd*-eabi* | kopensolaris*-gnu* | cloudabi*-eabi* \
-			| storm-chaos* | os2-emx* | rtmk-nova*)
-				basic_machine=$field1
-				os=$maybe_os
-				;;
-			android-linux)
-				basic_machine=$field1-unknown
-				os=linux-android
-				;;
-			*)
-				basic_machine=$field1-$field2
-				os=$field3
-				;;
-		esac
-		;;
-	*-*)
-		# A lone config we happen to match not fitting any pattern
-		case $field1-$field2 in
-			decstation-3100)
-				basic_machine=mips-dec
-				os=
-				;;
-			*-*)
-				# Second component is usually, but not always the OS
-				case $field2 in
-					# Prevent following clause from handling this valid os
-					sun*os*)
-						basic_machine=$field1
-						os=$field2
-						;;
-					# Manufacturers
-					dec* | mips* | sequent* | encore* | pc533* | sgi* | sony* \
-					| att* | 7300* | 3300* | delta* | motorola* | sun[234]* \
-					| unicom* | ibm* | next | hp | isi* | apollo | altos* \
-					| convergent* | ncr* | news | 32* | 3600* | 3100* \
-					| hitachi* | c[123]* | convex* | sun | crds | omron* | dg \
-					| ultra | tti* | harris | dolphin | highlevel | gould \
-					| cbm | ns | masscomp | apple | axis | knuth | cray \
-					| microblaze* | sim | cisco \
-					| oki | wec | wrs | winbond)
-						basic_machine=$field1-$field2
-						os=
-						;;
-					*)
-						basic_machine=$field1
-						os=$field2
-						;;
-				esac
-			;;
-		esac
-		;;
-	*)
-		# Convert single-component short-hands not valid as part of
-		# multi-component configurations.
-		case $field1 in
-			386bsd)
-				basic_machine=i386-pc
-				os=bsd
-				;;
-			a29khif)
-				basic_machine=a29k-amd
-				os=udi
-				;;
-			adobe68k)
-				basic_machine=m68010-adobe
-				os=scout
-				;;
-			alliant)
-				basic_machine=fx80-alliant
-				os=
-				;;
-			altos | altos3068)
-				basic_machine=m68k-altos
-				os=
-				;;
-			am29k)
-				basic_machine=a29k-none
-				os=bsd
-				;;
-			amdahl)
-				basic_machine=580-amdahl
-				os=sysv
-				;;
-			amiga)
-				basic_machine=m68k-unknown
-				os=
-				;;
-			amigaos | amigados)
-				basic_machine=m68k-unknown
-				os=amigaos
-				;;
-			amigaunix | amix)
-				basic_machine=m68k-unknown
-				os=sysv4
-				;;
-			apollo68)
-				basic_machine=m68k-apollo
-				os=sysv
-				;;
-			apollo68bsd)
-				basic_machine=m68k-apollo
-				os=bsd
-				;;
-			aros)
-				basic_machine=i386-pc
-				os=aros
-				;;
-			aux)
-				basic_machine=m68k-apple
-				os=aux
-				;;
-			balance)
-				basic_machine=ns32k-sequent
-				os=dynix
-				;;
-			blackfin)
-				basic_machine=bfin-unknown
-				os=linux
-				;;
-			cegcc)
-				basic_machine=arm-unknown
-				os=cegcc
-				;;
-			convex-c1)
-				basic_machine=c1-convex
-				os=bsd
-				;;
-			convex-c2)
-				basic_machine=c2-convex
-				os=bsd
-				;;
-			convex-c32)
-				basic_machine=c32-convex
-				os=bsd
-				;;
-			convex-c34)
-				basic_machine=c34-convex
-				os=bsd
-				;;
-			convex-c38)
-				basic_machine=c38-convex
-				os=bsd
-				;;
-			cray)
-				basic_machine=j90-cray
-				os=unicos
-				;;
-			crds | unos)
-				basic_machine=m68k-crds
-				os=
-				;;
-			da30)
-				basic_machine=m68k-da30
-				os=
-				;;
-			decstation | pmax | pmin | dec3100 | decstatn)
-				basic_machine=mips-dec
-				os=
-				;;
-			delta88)
-				basic_machine=m88k-motorola
-				os=sysv3
-				;;
-			dicos)
-				basic_machine=i686-pc
-				os=dicos
-				;;
-			djgpp)
-				basic_machine=i586-pc
-				os=msdosdjgpp
-				;;
-			ebmon29k)
-				basic_machine=a29k-amd
-				os=ebmon
-				;;
-			es1800 | OSE68k | ose68k | ose | OSE)
-				basic_machine=m68k-ericsson
-				os=ose
-				;;
-			gmicro)
-				basic_machine=tron-gmicro
-				os=sysv
-				;;
-			go32)
-				basic_machine=i386-pc
-				os=go32
-				;;
-			h8300hms)
-				basic_machine=h8300-hitachi
-				os=hms
-				;;
-			h8300xray)
-				basic_machine=h8300-hitachi
-				os=xray
-				;;
-			h8500hms)
-				basic_machine=h8500-hitachi
-				os=hms
-				;;
-			harris)
-				basic_machine=m88k-harris
-				os=sysv3
-				;;
-			hp300)
-				basic_machine=m68k-hp
-				;;
-			hp300bsd)
-				basic_machine=m68k-hp
-				os=bsd
-				;;
-			hp300hpux)
-				basic_machine=m68k-hp
-				os=hpux
-				;;
-			hppaosf)
-				basic_machine=hppa1.1-hp
-				os=osf
-				;;
-			hppro)
-				basic_machine=hppa1.1-hp
-				os=proelf
-				;;
-			i386mach)
-				basic_machine=i386-mach
-				os=mach
-				;;
-			vsta)
-				basic_machine=i386-pc
-				os=vsta
-				;;
-			isi68 | isi)
-				basic_machine=m68k-isi
-				os=sysv
-				;;
-			m68knommu)
-				basic_machine=m68k-unknown
-				os=linux
-				;;
-			magnum | m3230)
-				basic_machine=mips-mips
-				os=sysv
-				;;
-			merlin)
-				basic_machine=ns32k-utek
-				os=sysv
-				;;
-			mingw64)
-				basic_machine=x86_64-pc
-				os=mingw64
-				;;
-			mingw32)
-				basic_machine=i686-pc
-				os=mingw32
-				;;
-			mingw32ce)
-				basic_machine=arm-unknown
-				os=mingw32ce
-				;;
-			monitor)
-				basic_machine=m68k-rom68k
-				os=coff
-				;;
-			morphos)
-				basic_machine=powerpc-unknown
-				os=morphos
-				;;
-			moxiebox)
-				basic_machine=moxie-unknown
-				os=moxiebox
-				;;
-			msdos)
-				basic_machine=i386-pc
-				os=msdos
-				;;
-			msys)
-				basic_machine=i686-pc
-				os=msys
-				;;
-			mvs)
-				basic_machine=i370-ibm
-				os=mvs
-				;;
-			nacl)
-				basic_machine=le32-unknown
-				os=nacl
-				;;
-			ncr3000)
-				basic_machine=i486-ncr
-				os=sysv4
-				;;
-			netbsd386)
-				basic_machine=i386-pc
-				os=netbsd
-				;;
-			netwinder)
-				basic_machine=armv4l-rebel
-				os=linux
-				;;
-			news | news700 | news800 | news900)
-				basic_machine=m68k-sony
-				os=newsos
-				;;
-			news1000)
-				basic_machine=m68030-sony
-				os=newsos
-				;;
-			necv70)
-				basic_machine=v70-nec
-				os=sysv
-				;;
-			nh3000)
-				basic_machine=m68k-harris
-				os=cxux
-				;;
-			nh[45]000)
-				basic_machine=m88k-harris
-				os=cxux
-				;;
-			nindy960)
-				basic_machine=i960-intel
-				os=nindy
-				;;
-			mon960)
-				basic_machine=i960-intel
-				os=mon960
-				;;
-			nonstopux)
-				basic_machine=mips-compaq
-				os=nonstopux
-				;;
-			os400)
-				basic_machine=powerpc-ibm
-				os=os400
-				;;
-			OSE68000 | ose68000)
-				basic_machine=m68000-ericsson
-				os=ose
-				;;
-			os68k)
-				basic_machine=m68k-none
-				os=os68k
-				;;
-			paragon)
-				basic_machine=i860-intel
-				os=osf
-				;;
-			parisc)
-				basic_machine=hppa-unknown
-				os=linux
-				;;
-			pw32)
-				basic_machine=i586-unknown
-				os=pw32
-				;;
-			rdos | rdos64)
-				basic_machine=x86_64-pc
-				os=rdos
-				;;
-			rdos32)
-				basic_machine=i386-pc
-				os=rdos
-				;;
-			rom68k)
-				basic_machine=m68k-rom68k
-				os=coff
-				;;
-			sa29200)
-				basic_machine=a29k-amd
-				os=udi
-				;;
-			sei)
-				basic_machine=mips-sei
-				os=seiux
-				;;
-			sequent)
-				basic_machine=i386-sequent
-				os=
-				;;
-			sps7)
-				basic_machine=m68k-bull
-				os=sysv2
-				;;
-			st2000)
-				basic_machine=m68k-tandem
-				os=
-				;;
-			stratus)
-				basic_machine=i860-stratus
-				os=sysv4
-				;;
-			sun2)
-				basic_machine=m68000-sun
-				os=
-				;;
-			sun2os3)
-				basic_machine=m68000-sun
-				os=sunos3
-				;;
-			sun2os4)
-				basic_machine=m68000-sun
-				os=sunos4
-				;;
-			sun3)
-				basic_machine=m68k-sun
-				os=
-				;;
-			sun3os3)
-				basic_machine=m68k-sun
-				os=sunos3
-				;;
-			sun3os4)
-				basic_machine=m68k-sun
-				os=sunos4
-				;;
-			sun4)
-				basic_machine=sparc-sun
-				os=
-				;;
-			sun4os3)
-				basic_machine=sparc-sun
-				os=sunos3
-				;;
-			sun4os4)
-				basic_machine=sparc-sun
-				os=sunos4
-				;;
-			sun4sol2)
-				basic_machine=sparc-sun
-				os=solaris2
-				;;
-			sun386 | sun386i | roadrunner)
-				basic_machine=i386-sun
-				os=
-				;;
-			sv1)
-				basic_machine=sv1-cray
-				os=unicos
-				;;
-			symmetry)
-				basic_machine=i386-sequent
-				os=dynix
-				;;
-			t3e)
-				basic_machine=alphaev5-cray
-				os=unicos
-				;;
-			t90)
-				basic_machine=t90-cray
-				os=unicos
-				;;
-			toad1)
-				basic_machine=pdp10-xkl
-				os=tops20
-				;;
-			tpf)
-				basic_machine=s390x-ibm
-				os=tpf
-				;;
-			udi29k)
-				basic_machine=a29k-amd
-				os=udi
-				;;
-			ultra3)
-				basic_machine=a29k-nyu
-				os=sym1
-				;;
-			v810 | necv810)
-				basic_machine=v810-nec
-				os=none
-				;;
-			vaxv)
-				basic_machine=vax-dec
-				os=sysv
-				;;
-			vms)
-				basic_machine=vax-dec
-				os=vms
-				;;
-			vxworks960)
-				basic_machine=i960-wrs
-				os=vxworks
-				;;
-			vxworks68)
-				basic_machine=m68k-wrs
-				os=vxworks
-				;;
-			vxworks29k)
-				basic_machine=a29k-wrs
-				os=vxworks
-				;;
-			xbox)
-				basic_machine=i686-pc
-				os=mingw32
-				;;
-			ymp)
-				basic_machine=ymp-cray
-				os=unicos
-				;;
-			*)
-				basic_machine=$1
-				os=
-				;;
-		esac
-		;;
-esac
-
-# Decode 1-component or ad-hoc basic machines
-case $basic_machine in
-	# Here we handle the default manufacturer of certain CPU types.  It is in
-	# some cases the only manufacturer, in others, it is the most popular.
-	w89k)
-		cpu=hppa1.1
-		vendor=winbond
-		;;
-	op50n)
-		cpu=hppa1.1
-		vendor=oki
-		;;
-	op60c)
-		cpu=hppa1.1
-		vendor=oki
-		;;
-	ibm*)
-		cpu=i370
-		vendor=ibm
-		;;
-	orion105)
-		cpu=clipper
-		vendor=highlevel
-		;;
-	mac | mpw | mac-mpw)
-		cpu=m68k
-		vendor=apple
-		;;
-	pmac | pmac-mpw)
-		cpu=powerpc
-		vendor=apple
-		;;
-
-	# Recognize the various machine names and aliases which stand
-	# for a CPU type and a company and sometimes even an OS.
-	3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
-		cpu=m68000
-		vendor=att
-		;;
-	3b*)
-		cpu=we32k
-		vendor=att
-		;;
-	bluegene*)
-		cpu=powerpc
-		vendor=ibm
-		os=cnk
-		;;
-	decsystem10* | dec10*)
-		cpu=pdp10
-		vendor=dec
-		os=tops10
-		;;
-	decsystem20* | dec20*)
-		cpu=pdp10
-		vendor=dec
-		os=tops20
-		;;
-	delta | 3300 | motorola-3300 | motorola-delta \
-	      | 3300-motorola | delta-motorola)
-		cpu=m68k
-		vendor=motorola
-		;;
-	dpx2*)
-		cpu=m68k
-		vendor=bull
-		os=sysv3
-		;;
-	encore | umax | mmax)
-		cpu=ns32k
-		vendor=encore
-		;;
-	elxsi)
-		cpu=elxsi
-		vendor=elxsi
-		os=${os:-bsd}
-		;;
-	fx2800)
-		cpu=i860
-		vendor=alliant
-		;;
-	genix)
-		cpu=ns32k
-		vendor=ns
-		;;
-	h3050r* | hiux*)
-		cpu=hppa1.1
-		vendor=hitachi
-		os=hiuxwe2
-		;;
-	hp3k9[0-9][0-9] | hp9[0-9][0-9])
-		cpu=hppa1.0
-		vendor=hp
-		;;
-	hp9k2[0-9][0-9] | hp9k31[0-9])
-		cpu=m68000
-		vendor=hp
-		;;
-	hp9k3[2-9][0-9])
-		cpu=m68k
-		vendor=hp
-		;;
-	hp9k6[0-9][0-9] | hp6[0-9][0-9])
-		cpu=hppa1.0
-		vendor=hp
-		;;
-	hp9k7[0-79][0-9] | hp7[0-79][0-9])
-		cpu=hppa1.1
-		vendor=hp
-		;;
-	hp9k78[0-9] | hp78[0-9])
-		# FIXME: really hppa2.0-hp
-		cpu=hppa1.1
-		vendor=hp
-		;;
-	hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
-		# FIXME: really hppa2.0-hp
-		cpu=hppa1.1
-		vendor=hp
-		;;
-	hp9k8[0-9][13679] | hp8[0-9][13679])
-		cpu=hppa1.1
-		vendor=hp
-		;;
-	hp9k8[0-9][0-9] | hp8[0-9][0-9])
-		cpu=hppa1.0
-		vendor=hp
-		;;
-	i*86v32)
-		cpu=`echo "$1" | sed -e 's/86.*/86/'`
-		vendor=pc
-		os=sysv32
-		;;
-	i*86v4*)
-		cpu=`echo "$1" | sed -e 's/86.*/86/'`
-		vendor=pc
-		os=sysv4
-		;;
-	i*86v)
-		cpu=`echo "$1" | sed -e 's/86.*/86/'`
-		vendor=pc
-		os=sysv
-		;;
-	i*86sol2)
-		cpu=`echo "$1" | sed -e 's/86.*/86/'`
-		vendor=pc
-		os=solaris2
-		;;
-	j90 | j90-cray)
-		cpu=j90
-		vendor=cray
-		os=${os:-unicos}
-		;;
-	iris | iris4d)
-		cpu=mips
-		vendor=sgi
-		case $os in
-		    irix*)
-			;;
-		    *)
-			os=irix4
-			;;
-		esac
-		;;
-	miniframe)
-		cpu=m68000
-		vendor=convergent
-		;;
-	*mint | mint[0-9]* | *MiNT | *MiNT[0-9]*)
-		cpu=m68k
-		vendor=atari
-		os=mint
-		;;
-	news-3600 | risc-news)
-		cpu=mips
-		vendor=sony
-		os=newsos
-		;;
-	next | m*-next)
-		cpu=m68k
-		vendor=next
-		case $os in
-		    openstep*)
-		        ;;
-		    nextstep*)
-			;;
-		    ns2*)
-		      os=nextstep2
-			;;
-		    *)
-		      os=nextstep3
-			;;
-		esac
-		;;
-	np1)
-		cpu=np1
-		vendor=gould
-		;;
-	op50n-* | op60c-*)
-		cpu=hppa1.1
-		vendor=oki
-		os=proelf
-		;;
-	pa-hitachi)
-		cpu=hppa1.1
-		vendor=hitachi
-		os=hiuxwe2
-		;;
-	pbd)
-		cpu=sparc
-		vendor=tti
-		;;
-	pbb)
-		cpu=m68k
-		vendor=tti
-		;;
-	pc532)
-		cpu=ns32k
-		vendor=pc532
-		;;
-	pn)
-		cpu=pn
-		vendor=gould
-		;;
-	power)
-		cpu=power
-		vendor=ibm
-		;;
-	ps2)
-		cpu=i386
-		vendor=ibm
-		;;
-	rm[46]00)
-		cpu=mips
-		vendor=siemens
-		;;
-	rtpc | rtpc-*)
-		cpu=romp
-		vendor=ibm
-		;;
-	sde)
-		cpu=mipsisa32
-		vendor=sde
-		os=${os:-elf}
-		;;
-	simso-wrs)
-		cpu=sparclite
-		vendor=wrs
-		os=vxworks
-		;;
-	tower | tower-32)
-		cpu=m68k
-		vendor=ncr
-		;;
-	vpp*|vx|vx-*)
-		cpu=f301
-		vendor=fujitsu
-		;;
-	w65)
-		cpu=w65
-		vendor=wdc
-		;;
-	w89k-*)
-		cpu=hppa1.1
-		vendor=winbond
-		os=proelf
-		;;
-	none)
-		cpu=none
-		vendor=none
-		;;
-	leon|leon[3-9])
-		cpu=sparc
-		vendor=$basic_machine
-		;;
-	leon-*|leon[3-9]-*)
-		cpu=sparc
-		vendor=`echo "$basic_machine" | sed 's/-.*//'`
-		;;
-
-	*-*)
-		# shellcheck disable=SC2162
-		IFS="-" read cpu vendor <<EOF
-$basic_machine
-EOF
-		;;
-	# We use `pc' rather than `unknown'
-	# because (1) that's what they normally are, and
-	# (2) the word "unknown" tends to confuse beginning users.
-	i*86 | x86_64)
-		cpu=$basic_machine
-		vendor=pc
-		;;
-	# These rules are duplicated from below for sake of the special case above;
-	# i.e. things that normalized to x86 arches should also default to "pc"
-	pc98)
-		cpu=i386
-		vendor=pc
-		;;
-	x64 | amd64)
-		cpu=x86_64
-		vendor=pc
-		;;
-	# Recognize the basic CPU types without company name.
-	*)
-		cpu=$basic_machine
-		vendor=unknown
-		;;
-esac
-
-unset -v basic_machine
-
-# Decode basic machines in the full and proper CPU-Company form.
-case $cpu-$vendor in
-	# Here we handle the default manufacturer of certain CPU types in canonical form. It is in
-	# some cases the only manufacturer, in others, it is the most popular.
-	craynv-unknown)
-		vendor=cray
-		os=${os:-unicosmp}
-		;;
-	c90-unknown | c90-cray)
-		vendor=cray
-		os=${os:-unicos}
-		;;
-	fx80-unknown)
-		vendor=alliant
-		;;
-	romp-unknown)
-		vendor=ibm
-		;;
-	mmix-unknown)
-		vendor=knuth
-		;;
-	microblaze-unknown | microblazeel-unknown)
-		vendor=xilinx
-		;;
-	rs6000-unknown)
-		vendor=ibm
-		;;
-	vax-unknown)
-		vendor=dec
-		;;
-	pdp11-unknown)
-		vendor=dec
-		;;
-	we32k-unknown)
-		vendor=att
-		;;
-	cydra-unknown)
-		vendor=cydrome
-		;;
-	i370-ibm*)
-		vendor=ibm
-		;;
-	orion-unknown)
-		vendor=highlevel
-		;;
-	xps-unknown | xps100-unknown)
-		cpu=xps100
-		vendor=honeywell
-		;;
-
-	# Here we normalize CPU types with a missing or matching vendor
-	dpx20-unknown | dpx20-bull)
-		cpu=rs6000
-		vendor=bull
-		os=${os:-bosx}
-		;;
-
-	# Here we normalize CPU types irrespective of the vendor
-	amd64-*)
-		cpu=x86_64
-		;;
-	blackfin-*)
-		cpu=bfin
-		os=linux
-		;;
-	c54x-*)
-		cpu=tic54x
-		;;
-	c55x-*)
-		cpu=tic55x
-		;;
-	c6x-*)
-		cpu=tic6x
-		;;
-	e500v[12]-*)
-		cpu=powerpc
-		os=$os"spe"
-		;;
-	mips3*-*)
-		cpu=mips64
-		;;
-	ms1-*)
-		cpu=mt
-		;;
-	m68knommu-*)
-		cpu=m68k
-		os=linux
-		;;
-	m9s12z-* | m68hcs12z-* | hcs12z-* | s12z-*)
-		cpu=s12z
-		;;
-	openrisc-*)
-		cpu=or32
-		;;
-	parisc-*)
-		cpu=hppa
-		os=linux
-		;;
-	pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
-		cpu=i586
-		;;
-	pentiumpro-* | p6-* | 6x86-* | athlon-* | athalon_*-*)
-		cpu=i686
-		;;
-	pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
-		cpu=i686
-		;;
-	pentium4-*)
-		cpu=i786
-		;;
-	pc98-*)
-		cpu=i386
-		;;
-	ppc-* | ppcbe-*)
-		cpu=powerpc
-		;;
-	ppcle-* | powerpclittle-*)
-		cpu=powerpcle
-		;;
-	ppc64-*)
-		cpu=powerpc64
-		;;
-	ppc64le-* | powerpc64little-*)
-		cpu=powerpc64le
-		;;
-	sb1-*)
-		cpu=mipsisa64sb1
-		;;
-	sb1el-*)
-		cpu=mipsisa64sb1el
-		;;
-	sh5e[lb]-*)
-		cpu=`echo "$cpu" | sed 's/^\(sh.\)e\(.\)$/\1\2e/'`
-		;;
-	spur-*)
-		cpu=spur
-		;;
-	strongarm-* | thumb-*)
-		cpu=arm
-		;;
-	tx39-*)
-		cpu=mipstx39
-		;;
-	tx39el-*)
-		cpu=mipstx39el
-		;;
-	x64-*)
-		cpu=x86_64
-		;;
-	xscale-* | xscalee[bl]-*)
-		cpu=`echo "$cpu" | sed 's/^xscale/arm/'`
-		;;
-
-	# Recognize the canonical CPU Types that limit and/or modify the
-	# company names they are paired with.
-	cr16-*)
-		os=${os:-elf}
-		;;
-	crisv32-* | etraxfs*-*)
-		cpu=crisv32
-		vendor=axis
-		;;
-	cris-* | etrax*-*)
-		cpu=cris
-		vendor=axis
-		;;
-	crx-*)
-		os=${os:-elf}
-		;;
-	neo-tandem)
-		cpu=neo
-		vendor=tandem
-		;;
-	nse-tandem)
-		cpu=nse
-		vendor=tandem
-		;;
-	nsr-tandem)
-		cpu=nsr
-		vendor=tandem
-		;;
-	nsv-tandem)
-		cpu=nsv
-		vendor=tandem
-		;;
-	nsx-tandem)
-		cpu=nsx
-		vendor=tandem
-		;;
-	s390-*)
-		cpu=s390
-		vendor=ibm
-		;;
-	s390x-*)
-		cpu=s390x
-		vendor=ibm
-		;;
-	tile*-*)
-		os=${os:-linux-gnu}
-		;;
-
-	*)
-		# Recognize the canonical CPU types that are allowed with any
-		# company name.
-		case $cpu in
-			1750a | 580 \
-			| a29k \
-			| aarch64 | aarch64_be \
-			| abacus \
-			| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] \
-			| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] \
-			| alphapca5[67] | alpha64pca5[67] \
-			| am33_2.0 \
-			| amdgcn \
-			| arc | arceb \
-			| arm  | arm[lb]e | arme[lb] | armv* \
-			| avr | avr32 \
-			| asmjs \
-			| ba \
-			| be32 | be64 \
-			| bfin | bpf | bs2000 \
-			| c[123]* | c30 | [cjt]90 | c4x \
-			| c8051 | clipper | craynv | csky | cydra \
-			| d10v | d30v | dlx | dsp16xx \
-			| e2k | elxsi | epiphany \
-			| f30[01] | f700 | fido | fr30 | frv | ft32 | fx80 \
-			| h8300 | h8500 \
-			| hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
-			| hexagon \
-			| i370 | i*86 | i860 | i960 | ia16 | ia64 \
-			| ip2k | iq2000 \
-			| k1om \
-			| le32 | le64 \
-			| lm32 \
-			| m32c | m32r | m32rle \
-			| m5200 | m68000 | m680[012346]0 | m68360 | m683?2 | m68k \
-			| m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x \
-			| m88110 | m88k | maxq | mb | mcore | mep | metag \
-			| microblaze | microblazeel \
-			| mips | mipsbe | mipseb | mipsel | mipsle \
-			| mips16 \
-			| mips64 | mips64eb | mips64el \
-			| mips64octeon | mips64octeonel \
-			| mips64orion | mips64orionel \
-			| mips64r5900 | mips64r5900el \
-			| mips64vr | mips64vrel \
-			| mips64vr4100 | mips64vr4100el \
-			| mips64vr4300 | mips64vr4300el \
-			| mips64vr5000 | mips64vr5000el \
-			| mips64vr5900 | mips64vr5900el \
-			| mipsisa32 | mipsisa32el \
-			| mipsisa32r2 | mipsisa32r2el \
-			| mipsisa32r6 | mipsisa32r6el \
-			| mipsisa64 | mipsisa64el \
-			| mipsisa64r2 | mipsisa64r2el \
-			| mipsisa64r6 | mipsisa64r6el \
-			| mipsisa64sb1 | mipsisa64sb1el \
-			| mipsisa64sr71k | mipsisa64sr71kel \
-			| mipsr5900 | mipsr5900el \
-			| mipstx39 | mipstx39el \
-			| mmix \
-			| mn10200 | mn10300 \
-			| moxie \
-			| mt \
-			| msp430 \
-			| nds32 | nds32le | nds32be \
-			| nfp \
-			| nios | nios2 | nios2eb | nios2el \
-			| none | np1 | ns16k | ns32k | nvptx \
-			| open8 \
-			| or1k* \
-			| or32 \
-			| orion \
-			| picochip \
-			| pdp10 | pdp11 | pj | pjl | pn | power \
-			| powerpc | powerpc64 | powerpc64le | powerpcle | powerpcspe \
-			| pru \
-			| pyramid \
-			| riscv | riscv32 | riscv64 \
-			| rl78 | romp | rs6000 | rx \
-			| score \
-			| sh | shl \
-			| sh[1234] | sh[24]a | sh[24]ae[lb] | sh[23]e | she[lb] | sh[lb]e \
-			| sh[1234]e[lb] |  sh[12345][lb]e | sh[23]ele | sh64 | sh64le \
-			| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet \
-			| sparclite \
-			| sparcv8 | sparcv9 | sparcv9b | sparcv9v | sv1 | sx* \
-			| spu \
-			| tahoe \
-			| tic30 | tic4x | tic54x | tic55x | tic6x | tic80 \
-			| tron \
-			| ubicom32 \
-			| v70 | v850 | v850e | v850e1 | v850es | v850e2 | v850e2v3 \
-			| vax \
-			| visium \
-			| w65 \
-			| wasm32 | wasm64 \
-			| we32k \
-			| x86 | x86_64 | xc16x | xgate | xps100 \
-			| xstormy16 | xtensa* \
-			| ymp \
-			| z8k | z80)
-				;;
-
-			*)
-				echo Invalid configuration \`"$1"\': machine \`"$cpu-$vendor"\' not recognized 1>&2
-				exit 1
-				;;
-		esac
-		;;
-esac
-
-# Here we canonicalize certain aliases for manufacturers.
-case $vendor in
-	digital*)
-		vendor=dec
-		;;
-	commodore*)
-		vendor=cbm
-		;;
-	*)
-		;;
-esac
-
-# Decode manufacturer-specific aliases for certain operating systems.
-
-if [ x$os != x ]
-then
-case $os in
-	# First match some system type aliases that might get confused
-	# with valid system types.
-	# solaris* is a basic system type, with this one exception.
-	auroraux)
-		os=auroraux
-		;;
-	bluegene*)
-		os=cnk
-		;;
-	solaris1 | solaris1.*)
-		os=`echo $os | sed -e 's|solaris1|sunos4|'`
-		;;
-	solaris)
-		os=solaris2
-		;;
-	unixware*)
-		os=sysv4.2uw
-		;;
-	gnu/linux*)
-		os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
-		;;
-	# es1800 is here to avoid being matched by es* (a different OS)
-	es1800*)
-		os=ose
-		;;
-	# Some version numbers need modification
-	chorusos*)
-		os=chorusos
-		;;
-	isc)
-		os=isc2.2
-		;;
-	sco6)
-		os=sco5v6
-		;;
-	sco5)
-		os=sco3.2v5
-		;;
-	sco4)
-		os=sco3.2v4
-		;;
-	sco3.2.[4-9]*)
-		os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
-		;;
-	sco3.2v[4-9]* | sco5v6*)
-		# Don't forget version if it is 3.2v4 or newer.
-		;;
-	scout)
-		# Don't match below
-		;;
-	sco*)
-		os=sco3.2v2
-		;;
-	psos*)
-		os=psos
-		;;
-	# Now accept the basic system types.
-	# The portable systems comes first.
-	# Each alternative MUST end in a * to match a version number.
-	# sysv* is not here because it comes later, after sysvr4.
-	gnu* | bsd* | mach* | minix* | genix* | ultrix* | irix* \
-	     | *vms* | esix* | aix* | cnk* | sunos | sunos[34]*\
-	     | hpux* | unos* | osf* | luna* | dgux* | auroraux* | solaris* \
-	     | sym* | kopensolaris* | plan9* \
-	     | amigaos* | amigados* | msdos* | newsos* | unicos* | aof* \
-	     | aos* | aros* | cloudabi* | sortix* \
-	     | nindy* | vxsim* | vxworks* | ebmon* | hms* | mvs* \
-	     | clix* | riscos* | uniplus* | iris* | isc* | rtu* | xenix* \
-	     | knetbsd* | mirbsd* | netbsd* \
-	     | bitrig* | openbsd* | solidbsd* | libertybsd* \
-	     | ekkobsd* | kfreebsd* | freebsd* | riscix* | lynxos* \
-	     | bosx* | nextstep* | cxux* | aout* | elf* | oabi* \
-	     | ptx* | coff* | ecoff* | winnt* | domain* | vsta* \
-	     | udi* | eabi* | lites* | ieee* | go32* | aux* | hcos* \
-	     | chorusrdb* | cegcc* | glidix* \
-	     | cygwin* | msys* | pe* | moss* | proelf* | rtems* \
-	     | midipix* | mingw32* | mingw64* | linux-gnu* | linux-android* \
-	     | linux-newlib* | linux-musl* | linux-uclibc* \
-	     | uxpv* | beos* | mpeix* | udk* | moxiebox* \
-	     | interix* | uwin* | mks* | rhapsody* | darwin* \
-	     | openstep* | oskit* | conix* | pw32* | nonstopux* \
-	     | storm-chaos* | tops10* | tenex* | tops20* | its* \
-	     | os2* | vos* | palmos* | uclinux* | nucleus* \
-	     | morphos* | superux* | rtmk* | windiss* \
-	     | powermax* | dnix* | nx6 | nx7 | sei* | dragonfly* \
-	     | skyos* | haiku* | rdos* | toppers* | drops* | es* \
-	     | onefs* | tirtos* | phoenix* | fuchsia* | redox* | bme* \
-	     | midnightbsd* | amdhsa* | unleashed* | emscripten* | wasi*)
-	# Remember, each alternative MUST END IN *, to match a version number.
-		;;
-	qnx*)
-		case $cpu in
-		    x86 | i*86)
-			;;
-		    *)
-			os=nto-$os
-			;;
-		esac
-		;;
-	hiux*)
-		os=hiuxwe2
-		;;
-	nto-qnx*)
-		;;
-	nto*)
-		os=`echo $os | sed -e 's|nto|nto-qnx|'`
-		;;
-	sim | xray | os68k* | v88r* \
-	    | windows* | osx | abug | netware* | os9* \
-	    | macos* | mpw* | magic* | mmixware* | mon960* | lnews*)
-		;;
-	linux-dietlibc)
-		os=linux-dietlibc
-		;;
-	linux*)
-		os=`echo $os | sed -e 's|linux|linux-gnu|'`
-		;;
-	lynx*178)
-		os=lynxos178
-		;;
-	lynx*5)
-		os=lynxos5
-		;;
-	lynx*)
-		os=lynxos
-		;;
-	mac*)
-		os=`echo "$os" | sed -e 's|mac|macos|'`
-		;;
-	opened*)
-		os=openedition
-		;;
-	os400*)
-		os=os400
-		;;
-	sunos5*)
-		os=`echo "$os" | sed -e 's|sunos5|solaris2|'`
-		;;
-	sunos6*)
-		os=`echo "$os" | sed -e 's|sunos6|solaris3|'`
-		;;
-	wince*)
-		os=wince
-		;;
-	utek*)
-		os=bsd
-		;;
-	dynix*)
-		os=bsd
-		;;
-	acis*)
-		os=aos
-		;;
-	atheos*)
-		os=atheos
-		;;
-	syllable*)
-		os=syllable
-		;;
-	386bsd)
-		os=bsd
-		;;
-	ctix* | uts*)
-		os=sysv
-		;;
-	nova*)
-		os=rtmk-nova
-		;;
-	ns2)
-		os=nextstep2
-		;;
-	nsk*)
-		os=nsk
-		;;
-	# Preserve the version number of sinix5.
-	sinix5.*)
-		os=`echo $os | sed -e 's|sinix|sysv|'`
-		;;
-	sinix*)
-		os=sysv4
-		;;
-	tpf*)
-		os=tpf
-		;;
-	triton*)
-		os=sysv3
-		;;
-	oss*)
-		os=sysv3
-		;;
-	svr4*)
-		os=sysv4
-		;;
-	svr3)
-		os=sysv3
-		;;
-	sysvr4)
-		os=sysv4
-		;;
-	# This must come after sysvr4.
-	sysv*)
-		;;
-	ose*)
-		os=ose
-		;;
-	*mint | mint[0-9]* | *MiNT | MiNT[0-9]*)
-		os=mint
-		;;
-	zvmoe)
-		os=zvmoe
-		;;
-	dicos*)
-		os=dicos
-		;;
-	pikeos*)
-		# Until real need of OS specific support for
-		# particular features comes up, bare metal
-		# configurations are quite functional.
-		case $cpu in
-		    arm*)
-			os=eabi
-			;;
-		    *)
-			os=elf
-			;;
-		esac
-		;;
-	nacl*)
-		;;
-	ios)
-		;;
-	none)
-		;;
-	*-eabi)
-		;;
-	*)
-		echo Invalid configuration \`"$1"\': system \`"$os"\' not recognized 1>&2
-		exit 1
-		;;
-esac
-else
-
-# Here we handle the default operating systems that come with various machines.
-# The value should be what the vendor currently ships out the door with their
-# machine or put another way, the most popular os provided with the machine.
-
-# Note that if you're going to try to match "-MANUFACTURER" here (say,
-# "-sun"), then you have to tell the case statement up towards the top
-# that MANUFACTURER isn't an operating system.  Otherwise, code above
-# will signal an error saying that MANUFACTURER isn't an operating
-# system, and we'll never get to this point.
-
-case $cpu-$vendor in
-	score-*)
-		os=elf
-		;;
-	spu-*)
-		os=elf
-		;;
-	*-acorn)
-		os=riscix1.2
-		;;
-	arm*-rebel)
-		os=linux
-		;;
-	arm*-semi)
-		os=aout
-		;;
-	c4x-* | tic4x-*)
-		os=coff
-		;;
-	c8051-*)
-		os=elf
-		;;
-	clipper-intergraph)
-		os=clix
-		;;
-	hexagon-*)
-		os=elf
-		;;
-	tic54x-*)
-		os=coff
-		;;
-	tic55x-*)
-		os=coff
-		;;
-	tic6x-*)
-		os=coff
-		;;
-	# This must come before the *-dec entry.
-	pdp10-*)
-		os=tops20
-		;;
-	pdp11-*)
-		os=none
-		;;
-	*-dec | vax-*)
-		os=ultrix4.2
-		;;
-	m68*-apollo)
-		os=domain
-		;;
-	i386-sun)
-		os=sunos4.0.2
-		;;
-	m68000-sun)
-		os=sunos3
-		;;
-	m68*-cisco)
-		os=aout
-		;;
-	mep-*)
-		os=elf
-		;;
-	mips*-cisco)
-		os=elf
-		;;
-	mips*-*)
-		os=elf
-		;;
-	or1k-*)
-		os=-elf
-		;;
-	or32-*)
-		os=coff
-		;;
-	*-tti)	# must be before sparc entry or we get the wrong os.
-		os=sysv3
-		;;
-	sparc-* | *-sun)
-		os=sunos4.1.1
-		;;
-	pru-*)
-		os=elf
-		;;
-	*-be)
-		os=beos
-		;;
-	*-ibm)
-		os=aix
-		;;
-	*-knuth)
-		os=mmixware
-		;;
-	*-wec)
-		os=proelf
-		;;
-	*-winbond)
-		os=proelf
-		;;
-	*-oki)
-		os=proelf
-		;;
-	*-hp)
-		os=hpux
-		;;
-	*-hitachi)
-		os=hiux
-		;;
-	i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
-		os=sysv
-		;;
-	*-cbm)
-		os=amigaos
-		;;
-	*-dg)
-		os=dgux
-		;;
-	*-dolphin)
-		os=sysv3
-		;;
-	m68k-ccur)
-		os=rtu
-		;;
-	m88k-omron*)
-		os=luna
-		;;
-	*-next)
-		os=nextstep
-		;;
-	*-sequent)
-		os=ptx
-		;;
-	*-crds)
-		os=unos
-		;;
-	*-ns)
-		os=genix
-		;;
-	i370-*)
-		os=mvs
-		;;
-	*-gould)
-		os=sysv
-		;;
-	*-highlevel)
-		os=bsd
-		;;
-	*-encore)
-		os=bsd
-		;;
-	*-sgi)
-		os=irix
-		;;
-	*-siemens)
-		os=sysv4
-		;;
-	*-masscomp)
-		os=rtu
-		;;
-	f30[01]-fujitsu | f700-fujitsu)
-		os=uxpv
-		;;
-	*-rom68k)
-		os=coff
-		;;
-	*-*bug)
-		os=coff
-		;;
-	*-apple)
-		os=macos
-		;;
-	*-atari*)
-		os=mint
-		;;
-	*-wrs)
-		os=vxworks
-		;;
-	*)
-		os=none
-		;;
-esac
-fi
-
-# Here we handle the case where we know the os, and the CPU type, but not the
-# manufacturer.  We pick the logical manufacturer.
-case $vendor in
-	unknown)
-		case $os in
-			riscix*)
-				vendor=acorn
-				;;
-			sunos*)
-				vendor=sun
-				;;
-			cnk*|-aix*)
-				vendor=ibm
-				;;
-			beos*)
-				vendor=be
-				;;
-			hpux*)
-				vendor=hp
-				;;
-			mpeix*)
-				vendor=hp
-				;;
-			hiux*)
-				vendor=hitachi
-				;;
-			unos*)
-				vendor=crds
-				;;
-			dgux*)
-				vendor=dg
-				;;
-			luna*)
-				vendor=omron
-				;;
-			genix*)
-				vendor=ns
-				;;
-			clix*)
-				vendor=intergraph
-				;;
-			mvs* | opened*)
-				vendor=ibm
-				;;
-			os400*)
-				vendor=ibm
-				;;
-			ptx*)
-				vendor=sequent
-				;;
-			tpf*)
-				vendor=ibm
-				;;
-			vxsim* | vxworks* | windiss*)
-				vendor=wrs
-				;;
-			aux*)
-				vendor=apple
-				;;
-			hms*)
-				vendor=hitachi
-				;;
-			mpw* | macos*)
-				vendor=apple
-				;;
-			*mint | mint[0-9]* | *MiNT | MiNT[0-9]*)
-				vendor=atari
-				;;
-			vos*)
-				vendor=stratus
-				;;
-		esac
-		;;
-esac
-
-echo "$cpu-$vendor-$os"
-exit
-
-# Local variables:
-# eval: (add-hook 'before-save-hook 'time-stamp)
-# time-stamp-start: "timestamp='"
-# time-stamp-format: "%:y-%02m-%02d"
-# time-stamp-end: "'"
-# End:
diff --git a/readline/support/install.sh b/readline/support/install.sh
deleted file mode 100755
index 0cac004..0000000
--- a/readline/support/install.sh
+++ /dev/null
@@ -1,247 +0,0 @@
-#!/bin/sh
-#
-# install - install a program, script, or datafile
-# This comes from X11R5.
-#
-# $XConsortium: install.sh,v 1.2 89/12/18 14:47:22 jim Exp $
-#
-# Copyright 1991 by the Massachusetts Institute of Technology
-#
-# Permission to use, copy, modify, distribute, and sell this software and its
-# documentation for any purpose is hereby granted without fee, provided that
-# the above copyright notice appear in all copies and that both that
-# copyright notice and this permission notice appear in supporting
-# documentation, and that the name of M.I.T. not be used in advertising or
-# publicity pertaining to distribution of the software without specific,
-# written prior permission.  M.I.T. makes no representations about the
-# suitability of this software for any purpose.  It is provided "as is"
-# without express or implied warranty.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.
-#
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-
-
-# put in absolute paths if you don't have them in your path; or use env. vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-tranformbasename=""
-transform_arg=""
-instcmd="$mvprog"
-chmodcmd="$chmodprog 0755"
-chowncmd=""
-chgrpcmd=""
-stripcmd=""
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=""
-dst=""
-dir_arg=""
-
-while [ x"$1" != x ]; do
-    case $1 in
-	-c) instcmd="$cpprog"
-	    shift
-	    continue;;
-
-	-d) dir_arg=true
-	    shift
-	    continue;;
-
-	-m) chmodcmd="$chmodprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-o) chowncmd="$chownprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-g) chgrpcmd="$chgrpprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-s) stripcmd="$stripprog"
-	    shift
-	    continue;;
-
-	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
-	    shift
-	    continue;;
-
-	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
-	    shift
-	    continue;;
-
-	*)  if [ x"$src" = x ]
-	    then
-		src=$1
-	    else
-		# this colon is to work around a 386BSD /bin/sh bug
-		:
-		dst=$1
-	    fi
-	    shift
-	    continue;;
-    esac
-done
-
-if [ x"$src" = x ]
-then
-	echo "install:	no input file specified"
-	exit 1
-else
-	true
-fi
-
-if [ x"$dir_arg" != x ]; then
-	dst=$src
-	src=""
-	
-	if [ -d $dst ]; then
-		instcmd=:
-	else
-		instcmd=mkdir
-	fi
-else
-
-# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
-# might cause directories to be created, which would be especially bad 
-# if $src (and thus $dsttmp) contains '*'.
-
-	if [ -f $src -o -d $src ]
-	then
-		true
-	else
-		echo "install:  $src does not exist"
-		exit 1
-	fi
-	
-	if [ x"$dst" = x ]
-	then
-		echo "install:	no destination specified"
-		exit 1
-	else
-		true
-	fi
-
-# If destination is a directory, append the input filename; if your system
-# does not like double slashes in filenames, you may need to add some logic
-
-	if [ -d $dst ]
-	then
-		dst="$dst"/`basename $src`
-	else
-		true
-	fi
-fi
-
-## this sed command emulates the dirname command
-dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
-
-# Make sure that the destination directory exists.
-#  this part is taken from Noah Friedman's mkinstalldirs script
-
-# Skip lots of stat calls in the usual case.
-if [ ! -d "$dstdir" ]; then
-defaultIFS='	
-'
-IFS="${IFS-${defaultIFS}}"
-
-oIFS="${IFS}"
-# Some sh's can't handle IFS=/ for some reason.
-IFS='%'
-set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
-IFS="${oIFS}"
-
-pathcomp=''
-
-while [ $# -ne 0 ] ; do
-	pathcomp="${pathcomp}${1}"
-	shift
-
-	if [ ! -d "${pathcomp}" ] ;
-        then
-		$mkdirprog "${pathcomp}"
-	else
-		true
-	fi
-
-	pathcomp="${pathcomp}/"
-done
-fi
-
-if [ x"$dir_arg" != x ]
-then
-	$doit $instcmd $dst &&
-
-	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
-	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
-else
-
-# If we're going to rename the final executable, determine the name now.
-
-	if [ x"$transformarg" = x ] 
-	then
-		dstfile=`basename $dst`
-	else
-		dstfile=`basename $dst $transformbasename | 
-			sed $transformarg`$transformbasename
-	fi
-
-# don't allow the sed command to completely eliminate the filename
-
-	if [ x"$dstfile" = x ] 
-	then
-		dstfile=`basename $dst`
-	else
-		true
-	fi
-
-# Make a temp file name in the proper directory.
-
-	dsttmp=$dstdir/#inst.$$#
-
-# Move or copy the file name to the temp name
-
-	$doit $instcmd $src $dsttmp &&
-
-	trap "rm -f ${dsttmp}" 0 &&
-
-# and set any options; do chmod last to preserve setuid bits
-
-# If any of these fail, we abort the whole thing.  If we want to
-# ignore errors from any of these, just make sure not to ignore
-# errors from the above "$doit $instcmd $src $dsttmp" command.
-
-	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
-	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
-
-# Now rename the file to the real destination.
-
-	$doit $rmcmd -f $dstdir/$dstfile &&
-	$doit $mvcmd $dsttmp $dstdir/$dstfile 
-
-fi &&
-
-
-exit 0
diff --git a/readline/support/mkdirs b/readline/support/mkdirs
deleted file mode 100755
index 46f656e..0000000
--- a/readline/support/mkdirs
+++ /dev/null
@@ -1,47 +0,0 @@
-#! /bin/sh
-#
-# mkdirs - a work-alike for `mkdir -p'
-#
-# Chet Ramey
-# chet@po.cwru.edu
-
-# Copyright (C) 1996-2002 Free Software Foundation, Inc.
-#
-#   This program is free software: you can redistribute it and/or modify
-#   it under the terms of the GNU General Public License as published by
-#   the Free Software Foundation, either version 3 of the License, or
-#   (at your option) any later version.
-#
-#   This program is distributed in the hope that it will be useful,
-#   but WITHOUT ANY WARRANTY; without even the implied warranty of
-#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#   GNU General Public License for more details.
-#
-#   You should have received a copy of the GNU General Public License
-#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-for dir
-do
-
-	test -d "$dir" && continue
-
-	tomake=$dir
-	while test -n "$dir" ; do
-		# dir=${dir%/*}
-		# dir=`expr "$dir" ':' '\(/.*\)/[^/]*'`
-		if dir=`expr "$dir" ':' '\(.*\)/[^/]*'`; then
-			tomake="$dir $tomake"
-		else
-			dir=
-		fi
-	done
-
-	for d in $tomake
-	do
-		test -d "$d" && continue
-		echo mkdir "$d"
-		mkdir "$d"
-	done
-done
-
-exit 0
diff --git a/readline/support/mkdist b/readline/support/mkdist
deleted file mode 100755
index 282431d..0000000
--- a/readline/support/mkdist
+++ /dev/null
@@ -1,129 +0,0 @@
-#! /bin/bash -
-#
-# mkdist - make a distribution directory from a master manifest file
-#
-# usage: mkdist [-m manifest] [-s srcdir] [-r rootname] [-t] [-v] version
-#
-# SRCDIR defaults to src
-# MANIFEST defaults to $SRCDIR/MANIFEST
-#
-# Chet Ramey
-# chet@po.cwru.edu
-
-# Copyright (C) 1996-2002 Free Software Foundation, Inc.
-#
-#   This program is free software: you can redistribute it and/or modify
-#   it under the terms of the GNU General Public License as published by
-#   the Free Software Foundation, either version 3 of the License, or
-#   (at your option) any later version.
-#
-#   This program is distributed in the hope that it will be useful,
-#   but WITHOUT ANY WARRANTY; without even the implied warranty of
-#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#   GNU General Public License for more details.
-#
-#   You should have received a copy of the GNU General Public License
-#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
-#
-
-SRCDIR=src
-ROOTNAME=bash
-
-usage()
-{
-	echo usage: mkdist [-m manifest] [-s srcdir] [-r rootname] [-t] [-v] version 1>&2
-	exit 2
-}
-
-vmsg()
-{
-	if [ -n "$verbose" ]; then
-		echo mkdist: "$@"
-	fi
-}
-
-while getopts m:s:r:tv name
-do
-	case $name in
-	m)	MANIFEST=$OPTARG ;;
-	s)	SRCDIR=$OPTARG ;;
-	r)	ROOTNAME=$OPTARG ;;
-	t)	maketar=yes ;;
-	v)	verbose=yes ;;
-	?)	usage ;;
-	esac
-done
-
-: ${MANIFEST:=$SRCDIR/MANIFEST}
-
-vmsg using $MANIFEST
-
-shift $(( $OPTIND - 1 ))
-
-if [ $# -lt 1 ]; then
-	usage
-fi
-
-version=$1
-newdir=${ROOTNAME}-$version
-
-tarfile=${newdir}.tar
-
-vmsg creating distribution for $ROOTNAME version $version in $newdir
-
-if [ ! -d $newdir ]; then
-	mkdir $newdir || { echo $0: cannot make directory $newdir 1>&2 ; exit 1; }
-fi
-
-dirmode=755
-filmode=644
-
-while read fname type mode
-do
-	[ -z "$fname" ] && continue
-
-	case "$fname" in
-	\#*)	continue ;;
-	esac
-
-	case "$type" in
-	d)	mkdir $newdir/$fname ;;
-	f)	cp -p $SRCDIR/$fname $newdir/$fname ;;
-	s)	ln -s $mode $newdir/$fname ; mode= ;;		# symlink
-	l)	ln $mode $newdir/$fname ; mode= ;;		# hard link
-	*)	echo "unknown file type $type" 1>&2 ;;
-	esac
-
-	if [ -n "$mode" ]; then
-		chmod $mode $newdir/$fname
-	fi
-
-done < $MANIFEST
-
-# cut off the `-alpha' in something like `2.0-alpha', leaving just the
-# numeric version
-#version=${version%%-*}
-
-#case "$version" in
-#*.*.*)	vers=${version%.*} ;;
-#*.*)	vers=${version} ;;
-#esac
-
-#echo $vers > $newdir/.distribution
-
-#case "$version" in
-#*.*.*)	plevel=${version##*.} ;;
-#*)	plevel=0 ;;
-#esac
-#[ -z "$plevel" ] && plevel=0
-#echo ${plevel} > $newdir/.patchlevel
-
-vmsg $newdir created
-
-if [ -n "$maketar" ]; then
-	tar cf ${tarfile} $newdir
-	gzip $tarfile
-	vmsg ${tarfile}.gz created
-fi
-
-exit 0
diff --git a/readline/support/mkinstalldirs b/readline/support/mkinstalldirs
deleted file mode 100755
index d2d5f21..0000000
--- a/readline/support/mkinstalldirs
+++ /dev/null
@@ -1,111 +0,0 @@
-#! /bin/sh
-# mkinstalldirs --- make directory hierarchy
-# Author: Noah Friedman <friedman@prep.ai.mit.edu>
-# Created: 1993-05-16
-# Public domain
-
-errstatus=0
-dirmode=""
-
-usage="\
-Usage: mkinstalldirs [-h] [--help] [-m mode] dir ..."
-
-# process command line arguments
-while test $# -gt 0 ; do
-  case $1 in
-    -h | --help | --h*)         # -h for help
-      echo "$usage" 1>&2
-      exit 0
-      ;;
-    -m)                         # -m PERM arg
-      shift
-      test $# -eq 0 && { echo "$usage" 1>&2; exit 1; }
-      dirmode=$1
-      shift
-      ;;
-    --)                         # stop option processing
-      shift
-      break
-      ;;
-    -*)                         # unknown option
-      echo "$usage" 1>&2
-      exit 1
-      ;;
-    *)                          # first non-opt arg
-      break
-      ;;
-  esac
-done
-
-for file
-do
-  if test -d "$file"; then
-    shift
-  else
-    break
-  fi
-done
-
-case $# in
-  0) exit 0 ;;
-esac
-
-case $dirmode in
-  '')
-    if mkdir -p -- . 2>/dev/null; then
-      echo "mkdir -p -- $*"
-      exec mkdir -p -- "$@"
-    fi
-    ;;
-  *)
-    if mkdir -m "$dirmode" -p -- . 2>/dev/null; then
-      echo "mkdir -m $dirmode -p -- $*"
-      exec mkdir -m "$dirmode" -p -- "$@"
-    fi
-    ;;
-esac
-
-for file
-do
-  set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
-  shift
-
-  pathcomp=
-  for d
-  do
-    pathcomp="$pathcomp$d"
-    case $pathcomp in
-      -*) pathcomp=./$pathcomp ;;
-    esac
-
-    if test ! -d "$pathcomp"; then
-      echo "mkdir $pathcomp"
-
-      mkdir "$pathcomp" || lasterr=$?
-
-      if test ! -d "$pathcomp"; then
-  	errstatus=$lasterr
-      else
-  	if test ! -z "$dirmode"; then
-	  echo "chmod $dirmode $pathcomp"
-    	  lasterr=""
-  	  chmod "$dirmode" "$pathcomp" || lasterr=$?
-
-  	  if test ! -z "$lasterr"; then
-  	    errstatus=$lasterr
-  	  fi
-  	fi
-      fi
-    fi
-
-    pathcomp="$pathcomp/"
-  done
-done
-
-exit $errstatus
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# End:
-# mkinstalldirs ends here
diff --git a/readline/support/shlib-install b/readline/support/shlib-install
deleted file mode 100755
index f4eea27..0000000
--- a/readline/support/shlib-install
+++ /dev/null
@@ -1,206 +0,0 @@
-#! /bin/sh
-#
-# shlib-install - install a shared library and do any necessary host-specific
-#		  post-installation configuration (like ldconfig)
-#
-# usage: shlib-install [-D] -O host_os [-V host_vendor] -d installation-dir [-b bin-dir] -i install-prog [-U] library
-#
-# Chet Ramey
-# chet@po.cwru.edu
-
-#
-# defaults
-#
-INSTALLDIR=/usr/local/lib
-LDCONFIG=ldconfig
-
-PROGNAME=`basename $0`
-USAGE="$PROGNAME [-D] -O host_os [-V host_vendor] -d installation-dir [-b bin-dir] -i install-prog [-U] library"
-
-# process options
-
-while [ $# -gt 0 ]; do
-	case "$1" in
-	-O)	shift; host_os="$1"; shift ;;
-	-V)	shift; host_vendor="$1"; shift ;;
-	-d)	shift; INSTALLDIR="$1"; shift ;;
-	-b)	shift; BINDIR="$1" ; shift ;;
-	-i)	shift; INSTALLPROG="$1" ; shift ;;
-	-D)	echo=echo ; shift ;;
-	-U)	uninstall=true ; shift ;;
-	-*)	echo "$USAGE" >&2 ; exit 2;;
-	*)	break ;;
-	esac
-done
-
-# set install target name
-LIBNAME="$1"
-
-if [ -z "$LIBNAME" ]; then
-	echo "$USAGE" >&2
-	exit 2
-fi
-
-OLDSUFF=old
-MV=mv
-RM="rm -f"
-LN="ln -s"
-
-# pre-install
-
-if [ -z "$uninstall" ]; then
-	${echo} $RM ${INSTALLDIR}/${LIBNAME}.${OLDSUFF}
-	if [ -f "$INSTALLDIR/$LIBNAME" ]; then
-		${echo} $MV $INSTALLDIR/$LIBNAME ${INSTALLDIR}/${LIBNAME}.${OLDSUFF}
-	fi
-fi
-
-# install/uninstall
-
-if [ -z "$uninstall" ] ; then
-	${echo} eval ${INSTALLPROG} $LIBNAME ${INSTALLDIR}/${LIBNAME}
-else
-	${echo} ${RM} ${INSTALLDIR}/${LIBNAME}
-fi
-
-# post-install/uninstall
-
-# HP-UX and Darwin/MacOS X require that a shared library have execute permission
-# Linux does, too, and ldd warns about it.  Solaris doesn't seem to mind,
-# but ldd still warns about it.
-# Cygwin installs both a dll (which must go in $BINDIR) and an implicit
-# link library (in $libdir)
-case "$host_os" in
-hpux*|darwin*|macosx*|linux*|solaris2*)
-	if [ -z "$uninstall" ]; then
-		chmod 755 ${INSTALLDIR}/${LIBNAME}
-	fi ;;
-cygwin*|mingw*)
-	IMPLIBNAME=`echo ${LIBNAME} \
-		| sed -e 's,^cyg,lib,' -e 's,[0-9]*.dll$,.dll.a,'`
-	if [ -z "$uninstall" ]; then
-		${echo} $RM ${BINDIR}/${LIBNAME}.${OLDSUFF}
-		if [ -f "$BINDIR/$LIBNAME" ]; then
-			${echo} $MV $BINDIR/$LIBNAME $BINDIR/$LIBNAME.$OLDSUFF
-		fi
-		${echo} $MV ${INSTALLDIR}/${LIBNAME} ${BINDIR}/${LIBNAME}
-		${echo} chmod a+x ${BINDIR}/${LIBNAME}
-		${echo} eval ${INSTALLPROG} ${LIBNAME}.a \
-			${INSTALLDIR}/${IMPLIBNAME}
-	else
-		${echo} ${RM} ${BINDIR}/${LIBNAME}
-		${echo} ${RM} ${INSTALLDIR}/${IMPLIBNAME}
-	fi ;;
-
-*)	;;
-esac
-
-case "$LIBNAME" in
-*.*.[0-9].[0-9])	# libname.so.M.N
-	LINK2=`echo $LIBNAME | sed 's:\(.*\..*\.[0-9]\)\.[0-9]:\1:'`	# libname.so.M
-	LINK1=`echo $LIBNAME | sed 's:\(.*\..*\)\.[0-9]\.[0-9]:\1:'`	# libname.so
-	;;
-*.*.[0-9])		# libname.so.M
-	LINK1=`echo $LIBNAME | sed 's:\(.*\..*\)\.[0-9]:\1:'`		# libname.so
-	;;
-*.[0-9])		# libname.M
-	LINK1=`echo $LIBNAME | sed 's:\(.*\)\.[0-9]:\1:'`		# libname
-	;;
-*.[0-9].[0-9].dylib)	# libname.M.N.dylib
-	LINK2=`echo $LIBNAME | sed 's:\(.*\.[0-9]\)\.[0-9]:\1:'`	# libname.M.dylib
-	LINK1=`echo $LIBNAME | sed 's:\(.*\)\.[0-9]\.[0-9]:\1:'`	# libname.dylib
-esac
-
-INSTALL_LINK1='${echo} cd $INSTALLDIR && ${echo} ${LN} $LIBNAME $LINK1'
-INSTALL_LINK2='${echo} cd $INSTALLDIR && ${echo} ${LN} $LIBNAME $LINK2'
-
-#
-# Create symlinks to the installed library.  This section is incomplete.
-#
-case "$host_os-$host_vendor" in
-*linux*|freebsd*-gentoo)
-	# libname.so.M -> libname.so.M.N
-	${echo} ${RM} ${INSTALLDIR}/$LINK2
-	if [ -z "$uninstall" ]; then
-		eval $INSTALL_LINK2
-	fi
-
-	# libname.so -> libname.so.M
-	${echo} ${RM} ${INSTALLDIR}/$LINK1
-	if [ -z "$uninstall" ]; then
-		${echo} cd $INSTALLDIR && ${echo} ${LN} $LINK2 $LINK1
-	fi
-	;;
-
-bsdi4*|*gnu*|darwin*|macosx*|netbsd*|mirbsd*)
-	# libname.so.M -> libname.so.M.N
-	${echo} ${RM} ${INSTALLDIR}/$LINK2
-	if [ -z "$uninstall" ]; then
-		eval $INSTALL_LINK2
-	fi
-
-	# libname.so -> libname.so.M.N
-	${echo} ${RM} ${INSTALLDIR}/$LINK1
-	if [ -z "$uninstall" ]; then
-		eval $INSTALL_LINK1
-	fi
-	;;
-
-solaris2*|aix4.[2-9]*|aix[5-9]*|osf*|irix[56]*|sysv[45]*|dgux*|interix*)
-	# libname.so -> libname.so.M
-	${echo} ${RM} ${INSTALLDIR}/$LINK1
-	if [ -z "$uninstall" ]; then
-		eval $INSTALL_LINK1
-	fi
-	;;
-
-
-# FreeBSD 3.x and above can have either a.out or ELF shared libraries
-freebsd3*|freebsdaout*)
-	if [ -x /usr/bin/objformat ] && [ "`/usr/bin/objformat`" = "elf" ]; then
-		# libname.so -> libname.so.M
-		${echo} ${RM} ${INSTALLDIR}/$LINK1
-		if [ -z "$uninstall" ]; then
-			eval $INSTALL_LINK1
-		fi
-	else
-		# libname.so.M -> libname.so.M.N
-		${echo} ${RM} ${INSTALLDIR}/$LINK2
-		if [ -z "$uninstall" ]; then
-			eval $INSTALL_LINK2
-		fi
-
-		# libname.so -> libname.so.M.N
-		${echo} ${RM} ${INSTALLDIR}/$LINK1
-		if [ -z "$uninstall" ]; then
-			eval $INSTALL_LINK1
-		fi
-	fi
-	;;
-
-freebsd[4-9]*|freebsd1[0-9]*|freebsdelf*|dragonfly*)
-	# libname.so -> libname.so.M
-	${echo} ${RM} ${INSTALLDIR}/$LINK1
-	if [ -z "$uninstall" ]; then
-		eval $INSTALL_LINK1
-	fi
-	;;
-	
-hpux1*)
-	# libname.sl -> libname.M
-	${echo} ${RM} ${INSTALLDIR}/$LINK1.sl
-	if [ -z "$uninstall" ]; then
-		eval $INSTALL_LINK1
-	fi
-	;;
-
-cygwin*|mingw*)
-	# Links to .dlls don't work.  Hence shobj-conf used DLLVERSION.dll
-	# instead of so.SHLIB_MAJOR.SHLIB_MINOR.  The postinstall above
-	# took care of everything else.
-	;;
-
-*)	;;
-esac
-
-exit 0
diff --git a/readline/support/shobj-conf b/readline/support/shobj-conf
deleted file mode 100755
index 7920f1b..0000000
--- a/readline/support/shobj-conf
+++ /dev/null
@@ -1,594 +0,0 @@
-#! /bin/sh
-#
-# shobj-conf -- output a series of variable assignments to be substituted
-#		into a Makefile by configure which specify system-dependent
-#		information for creating shared objects that may be loaded
-#		into bash with `enable -f'
-#
-# usage: shobj-conf [-C compiler] -c host_cpu -o host_os -v host_vendor
-#
-# Chet Ramey
-# chet@po.cwru.edu
-
-#   Copyright (C) 1996-2014 Free Software Foundation, Inc.
-#
-#   This file is part of GNU Bash, the Bourne Again SHell.
-#
-#   This program is free software: you can redistribute it and/or modify
-#   it under the terms of the GNU General Public License as published by
-#   the Free Software Foundation, either version 3 of the License, or
-#   (at your option) any later version.
-#
-#   This program is distributed in the hope that it will be useful,
-#   but WITHOUT ANY WARRANTY; without even the implied warranty of
-#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#   GNU General Public License for more details.
-#
-#   You should have received a copy of the GNU General Public License
-#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
-#
-
-#
-# defaults
-#
-SHOBJ_STATUS=supported
-SHLIB_STATUS=supported
-
-SHOBJ_CC=cc
-SHOBJ_CFLAGS=
-SHOBJ_LD=
-SHOBJ_LDFLAGS=
-SHOBJ_XLDFLAGS=
-SHOBJ_LIBS=
-
-SHLIB_XLDFLAGS=
-SHLIB_LIBS=
-
-SHLIB_DOT='.'
-SHLIB_LIBPREF='lib'
-SHLIB_LIBSUFF='so'
-
-SHLIB_LIBVERSION='$(SHLIB_LIBSUFF)'
-SHLIB_DLLVERSION='$(SHLIB_MAJOR)'
-
-PROGNAME=`basename $0`
-USAGE="$PROGNAME [-C compiler] -c host_cpu -o host_os -v host_vendor"
-
-while [ $# -gt 0 ]; do
-	case "$1" in
-	-C)	shift; SHOBJ_CC="$1"; shift ;;
-	-c)	shift; host_cpu="$1"; shift ;;
-	-o)	shift; host_os="$1"; shift ;;
-	-v)	shift; host_vendor="$1"; shift ;;
-	*)	echo "$USAGE" >&2 ; exit 2;;
-	esac
-done
-
-case "${host_os}-${SHOBJ_CC}-${host_vendor}" in
-nsk-cc-tandem)
-	SHOBJ_CFLAGS=-Wglobalized
-	case `uname -m` in
-	NSR*)
-		SHOBJ_CFLAGS="${SHOBJ_CFLAGS} -Wcall_shared" # default on TNS/E, needed on TNS/R
-		SHOBJ_LD=/usr/bin/ld # for TNS/R
-		;;
-	NSE*|NEO*)
-		SHOBJ_LD=/usr/bin/eld
-		;;
-	esac
-	SHOBJ_LDFLAGS='-shared -bglobalized -unres_symbols ignore'
-	;;
-
-sunos4*-*gcc*)
-	SHOBJ_CFLAGS=-fpic
-	SHOBJ_LD=/usr/bin/ld
-	SHOBJ_LDFLAGS='-assert pure-text'
-
-	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)$(SHLIB_MINOR)'
-	;;
-
-sunos4*)
-	SHOBJ_CFLAGS=-pic
-	SHOBJ_LD=/usr/bin/ld
-	SHOBJ_LDFLAGS='-assert pure-text'
-
-	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)$(SHLIB_MINOR)'
-	;;
-
-sunos5*-*gcc*|solaris2*-*gcc*)
-	SHOBJ_LD='${CC}'
-	ld_used=`gcc -print-prog-name=ld`
-	if ${ld_used} -V 2>&1 | grep GNU >/dev/null 2>&1; then
-		# This line works for the GNU ld
-		SHOBJ_LDFLAGS='-shared -Wl,-h,$@'
-		# http://sourceware.org/ml/binutils/2001-08/msg00361.html
-		SHOBJ_CFLAGS=-fPIC
-	else
-		# This line works for the Solaris linker in /usr/ccs/bin/ld
-		SHOBJ_LDFLAGS='-shared -Wl,-i -Wl,-h,$@'
-		SHOBJ_CFLAGS=-fpic
-	fi
-
-#	SHLIB_XLDFLAGS='-R $(libdir)'
-	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
-	;;
-
-sunos5*|solaris2*)
-	SHOBJ_CFLAGS='-K pic'
-	SHOBJ_LD=/usr/ccs/bin/ld
-	SHOBJ_LDFLAGS='-G -dy -z text -i -h $@'
-
-#	SHLIB_XLDFLAGS='-R $(libdir)'
-	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
-	;;
-
-# All versions of Linux (including Gentoo/FreeBSD) or the semi-mythical GNU Hurd.
-linux*-*|gnu*-*|k*bsd*-gnu-*|freebsd*-gentoo)
-	SHOBJ_CFLAGS=-fPIC
-	SHOBJ_LD='${CC}'
-	SHOBJ_LDFLAGS='-shared -Wl,-soname,$@'
-
-	SHLIB_XLDFLAGS='-Wl,-rpath,$(libdir) -Wl,-soname,`basename $@ $(SHLIB_MINOR)`'
-	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)$(SHLIB_MINOR)'
-	;;
-
-freebsd2*)
-	SHOBJ_CFLAGS=-fpic
-	SHOBJ_LD=ld
-	SHOBJ_LDFLAGS='-x -Bshareable'
-
-	SHLIB_XLDFLAGS='-R$(libdir)'
-	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)$(SHLIB_MINOR)'
-	;;
-
-# FreeBSD-3.x ELF
-freebsd3*|freebsdaout*)
-	SHOBJ_CFLAGS=-fPIC
-	SHOBJ_LD='${CC}'
-
-	if [ -x /usr/bin/objformat ] && [ "`/usr/bin/objformat`" = "elf" ]; then
-		SHOBJ_LDFLAGS='-shared -Wl,-soname,$@'
-
-		SHLIB_XLDFLAGS='-Wl,-rpath,$(libdir)'
-		SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
-	else
-		SHOBJ_LDFLAGS='-shared'
-
-		SHLIB_XLDFLAGS='-R$(libdir)'
-		SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)$(SHLIB_MINOR)'
-	fi
-	;;
-
-# FreeBSD-4.x and later have only ELF
-freebsd[4-9]*|freebsd1[0-9]*|freebsdelf*|dragonfly*)
-	SHOBJ_CFLAGS=-fPIC
-	SHOBJ_LD='${CC}'
-
-	SHOBJ_LDFLAGS='-shared -Wl,-soname,$@'
-	SHLIB_XLDFLAGS='-Wl,-rpath,$(libdir)'
-
-	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
-	;;
-
-# Darwin/MacOS X
-darwin*)
-	# Common definitions for all darwin/mac os x versions
-	SHOBJ_CFLAGS='-fno-common'
-
-	SHOBJ_LD='${CC}'
-
-	SHLIB_LIBVERSION='$(SHLIB_MAJOR)$(SHLIB_MINOR).$(SHLIB_LIBSUFF)'
-	SHLIB_LIBSUFF='dylib'
-
-	# unused at this time
-	SHLIB_SONAME='$(libdir)/`echo $@ | sed "s:\\..*::"`.$(SHLIB_MAJOR).$(SHLIB_LIBSUFF)'
-
-	case "${host_os}" in
-	# Darwin versions 1, 5, 6, 7 correspond to Mac OS X 10.0, 10.1, 10.2,
-	# and 10.3, respectively.
-	darwin[1-7].*)
-		SHOBJ_STATUS=unsupported
-		SHOBJ_LDFLAGS='-dynamic'
-		SHLIB_XLDFLAGS='-arch_only `/usr/bin/arch` -install_name $(libdir)/`echo $@ | sed "s:\\..*::"`.$(SHLIB_MAJOR).$(SHLIB_LIBSUFF) -current_version $(SHLIB_MAJOR)$(SHLIB_MINOR) -compatibility_version $(SHLIB_MAJOR)$(SHLIB_MINOR) -v'
-		;;
-	# Darwin 8 == Mac OS X 10.4; Mac OS X 10.N == Darwin N+4
-	*)
-		case "${host_os}" in
-		darwin[89]*|darwin1[012]*)
-			SHOBJ_ARCHFLAGS='-arch_only `/usr/bin/arch`'
-			;;
-		 *) 	# Mac OS X 10.9 (Mavericks) and later
-			SHOBJ_ARCHFLAGS=
-			# for 32 and 64bit universal library
-			#SHOBJ_ARCHFLAGS='-arch i386 -arch x86_64'
-			#SHOBJ_CFLAGS=${SHOBJ_CFLAGS}' -arch i386 -arch x86_64'
-			;;
-		 esac
-		 SHOBJ_LDFLAGS="-dynamiclib -dynamic -undefined dynamic_lookup ${SHOBJ_ARCHFLAGS}"
-		 SHLIB_XLDFLAGS="-dynamiclib ${SHOBJ_ARCHFLAGS}"' -install_name $(libdir)/`echo $@ | sed "s:\\..*::"`.$(SHLIB_MAJOR).$(SHLIB_LIBSUFF) -current_version $(SHLIB_MAJOR)$(SHLIB_MINOR) -compatibility_version $(SHLIB_MAJOR)$(SHLIB_MINOR) -v'
-		;;
-	esac
-
-	SHLIB_LIBS='-lncurses'	# see if -lcurses works on MacOS X 10.1 
-	;;
-
-openbsd*|netbsd*|mirbsd*)
-	SHOBJ_CFLAGS=-fPIC
-	SHOBJ_LD='${CC}'
-	SHOBJ_LDFLAGS='-shared'
-
-	SHLIB_XLDFLAGS='-R$(libdir)'
-	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)$(SHLIB_MINOR)'
-	;;
-
-bsdi2*)
-	SHOBJ_CC=shlicc2
-	SHOBJ_CFLAGS=
-	SHOBJ_LD=ld
-	SHOBJ_LDFLAGS=-r
-	SHOBJ_LIBS=-lc_s.2.1.0
-
-	# BSD/OS 2.x and 3.x `shared libraries' are too much of a pain in
-	# the ass -- they require changing {/usr/lib,etc}/shlib.map on
-	# each system, and the library creation process is byzantine
-	SHLIB_STATUS=unsupported
-	;;
-
-bsdi3*)
-	SHOBJ_CC=shlicc2
-	SHOBJ_CFLAGS=
-	SHOBJ_LD=ld
-	SHOBJ_LDFLAGS=-r
-	SHOBJ_LIBS=-lc_s.3.0.0
-
-	# BSD/OS 2.x and 3.x `shared libraries' are too much of a pain in
-	# the ass -- they require changing {/usr/lib,etc}/shlib.map on
-	# each system, and the library creation process is byzantine
-	SHLIB_STATUS=unsupported
-	;;
-
-bsdi4*)
-	# BSD/OS 4.x now supports ELF and SunOS-style dynamically-linked
-	# shared libraries.  gcc 2.x is the standard compiler, and the
-	# `normal' gcc options should work as they do in Linux.
-
-	SHOBJ_CFLAGS=-fPIC
-	SHOBJ_LD='${CC}'
-	SHOBJ_LDFLAGS='-shared -Wl,-soname,$@'
-
-	SHLIB_XLDFLAGS='-Wl,-soname,`basename $@ $(SHLIB_MINOR)`'
-	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)$(SHLIB_MINOR)'
-	;;
-
-osf*-*gcc*)
-	# Fix to use gcc linker driver from bfischer@TechFak.Uni-Bielefeld.DE
-	SHOBJ_LD='${CC}'
-	SHOBJ_LDFLAGS='-shared -Wl,-soname,$@'
-
-	SHLIB_XLDFLAGS='-rpath $(libdir)'
-	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
-	;;
-
-osf*)
-	SHOBJ_LD=ld
-	SHOBJ_LDFLAGS='-shared -soname $@ -expect_unresolved "*"'
-
-	SHLIB_XLDFLAGS='-rpath $(libdir)'
-	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
-	;;
-
-aix4.[2-9]*-*gcc*|aix[5-9].*-*gcc*)		# lightly tested by jik@cisco.com
-	SHOBJ_CFLAGS=-fpic
-	SHOBJ_LD='ld'
-	SHOBJ_LDFLAGS='-bdynamic -bnoentry -bexpall'
-	SHOBJ_XLDFLAGS='-G'
-
-	SHLIB_XLDFLAGS='-bM:SRE'
-	SHLIB_LIBS='-lcurses -lc'
-	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
-	;;
-
-aix4.[2-9]*|aix[5-9].*)
-	SHOBJ_CFLAGS=-K
-	SHOBJ_LD='ld'
-	SHOBJ_LDFLAGS='-bdynamic -bnoentry -bexpall'
-	SHOBJ_XLDFLAGS='-G'
-
-	SHLIB_XLDFLAGS='-bM:SRE'
-	SHLIB_LIBS='-lcurses -lc'
-	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
-	;;
-
-#
-# THE FOLLOWING ARE UNTESTED -- and some may not support the dlopen interface
-#
-irix[56]*-*gcc*)
-	SHOBJ_CFLAGS='-fpic'
-	SHOBJ_LD='${CC}'
-	SHOBJ_LDFLAGS='-shared -Wl,-soname,$@'
-
-	SHLIB_XLDFLAGS='-Wl,-rpath,$(libdir)'
-	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
-	;;
-
-irix[56]*)
-	SHOBJ_CFLAGS='-K PIC'
-	SHOBJ_LD=ld
-#	SHOBJ_LDFLAGS='-call_shared -hidden_symbol -no_unresolved -soname $@'
-#	Change from David Kaelbling <drk@sgi.com>.  If you have problems,
-#	remove the `-no_unresolved'
-	SHOBJ_LDFLAGS='-shared -no_unresolved -soname $@'
-
-	SHLIB_XLDFLAGS='-rpath $(libdir)'
-	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
-	;;
-
-hpux9*-*gcc*)
-	# must use gcc; the bundled cc cannot compile PIC code
-	SHOBJ_CFLAGS='-fpic'
-	SHOBJ_LD='${CC}'
-	SHOBJ_LDFLAGS='-shared -Wl,-b -Wl,+s'
-
-	SHLIB_XLDFLAGS='-Wl,+b,$(libdir)'
-	SHLIB_LIBSUFF='sl'
-	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
-	;;
-
-hpux9*)
-	SHOBJ_STATUS=unsupported
-	SHLIB_STATUS=unsupported
-
-	# If you are using the HP ANSI C compiler, you can uncomment and use
-	# this code (I have not tested it)
-#	SHOBJ_STATUS=supported
-#	SHLIB_STATUS=supported
-#
-#	SHOBJ_CFLAGS='+z'
-#	SHOBJ_LD='ld'
-#	SHOBJ_LDFLAGS='-b +s'
-#
-#	SHLIB_XLDFLAGS='+b $(libdir)'
-#	SHLIB_LIBSUFF='sl'
-#	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'	
-
-	;;
-
-hpux10*-*gcc*)
-	# must use gcc; the bundled cc cannot compile PIC code
-	SHOBJ_CFLAGS='-fpic'
-	SHOBJ_LD='${CC}'
-	# if you have problems linking here, moving the `-Wl,+h,$@' from
-	# SHLIB_XLDFLAGS to SHOBJ_LDFLAGS has been reported to work
-	SHOBJ_LDFLAGS='-shared -fpic -Wl,-b -Wl,+s'
-
-	SHLIB_XLDFLAGS='-Wl,+h,$@ -Wl,+b,$(libdir)'
-	SHLIB_LIBSUFF='sl'
-	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
-	;;
-
-hpux10*)
-	SHOBJ_STATUS=unsupported
-	SHLIB_STATUS=unsupported
-
-	# If you are using the HP ANSI C compiler, you can uncomment and use
-	# this code (I have not tested it)
-#	SHOBJ_STATUS=supported
-#	SHLIB_STATUS=supported
-#
-#	SHOBJ_CFLAGS='+z'
-#	SHOBJ_LD='ld'
-#	SHOBJ_LDFLAGS='-b +s +h $@'
-#
-#	SHLIB_XLDFLAGS='+b $(libdir)'
-#	SHLIB_LIBSUFF='sl'
-#	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'	
-
-	;;
-
-hpux11*-*gcc*)
-	# must use gcc; the bundled cc cannot compile PIC code
-	SHOBJ_CFLAGS='-fpic'
-	SHOBJ_LD='${CC}'
-#	SHOBJ_LDFLAGS='-shared -Wl,-b -Wl,-B,symbolic -Wl,+s -Wl,+std -Wl,+h,$@'
-	SHOBJ_LDFLAGS='-shared -fpic -Wl,-b -Wl,+s -Wl,+h,$@'
-
-	SHLIB_XLDFLAGS='-Wl,+b,$(libdir)'
-	SHLIB_LIBSUFF='sl'
-	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
-	;;
-
-hpux11*)
-	SHOBJ_STATUS=unsupported
-	SHLIB_STATUS=unsupported
-
-	# If you are using the HP ANSI C compiler, you can uncomment and use
-	# this code (I have not tested it)
-#	SHOBJ_STATUS=supported
-#	SHLIB_STATUS=supported
-#
-#	SHOBJ_CFLAGS='+z'
-#	SHOBJ_LD='ld'
-#	SHOBJ_LDFLAGS='-b +s +h $@'
-#
-#	SHLIB_XLDFLAGS='+b $(libdir)'
-#	SHLIB_LIBSUFF='sl'
-#	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'	
-
-	;;
-
-sysv4*-*gcc*)
-	SHOBJ_CFLAGS=-shared
-	SHOBJ_LDFLAGS='-shared -h $@'
-	SHOBJ_LD='${CC}'
-
-	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
-	;;
-
-sysv4*)
-	SHOBJ_CFLAGS='-K PIC'
-	SHOBJ_LD=ld
-	SHOBJ_LDFLAGS='-dy -z text -G -h $@'
-
-	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
-	;;
-
-sco3.2v5*-*gcc*)
-	SHOBJ_CFLAGS='-fpic'		# DEFAULTS TO ELF
-	SHOBJ_LD='${CC}'
-	SHOBJ_LDFLAGS='-shared'
-
-	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
-	;;
-
-sco3.2v5*)
-	SHOBJ_CFLAGS='-K pic -b elf'
-	SHOBJ_LD=ld
-	SHOBJ_LDFLAGS='-G -b elf -dy -z text -h $@'
-
-	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
-	;;
-
-sysv5uw7*-*gcc*)
-	SHOBJ_CFLAGS='-fpic'
-	SHOBJ_LD='${CC}'
-	SHOBJ_LDFLAGS='-shared'
-
-	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
-	;;
-
-sysv5uw7*)
-	SHOBJ_CFLAGS='-K PIC'
-	SHOBJ_LD=ld
-	SHOBJ_LDFLAGS='-G -dy -z text -h $@'
-
-	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
-	;;
-
-sysv5UnixWare*-*gcc*)
-	SHOBJ_CFLAGS=-fpic
-	SHOBJ_LD='${CC}'
-	SHOBJ_LDFLAGS='-shared'
-
-	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
-	;;
-
-sysv5UnixWare*)
-	SHOBJ_CFLAGS='-K PIC'
-	SHOBJ_LD=ld
-	SHOBJ_LDFLAGS='-G -dy -z text -h $@'
-
-	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
-	;;
-
-sysv5OpenUNIX*-*gcc*)
-	SHOBJ_CFLAGS=-fpic
-	SHOBJ_LD='${CC}'
-	SHOBJ_LDFLAGS='-shared'
-
-	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
-	;;
-
-sysv5OpenUNIX*)
-	SHOBJ_CFLAGS='-K PIC'
-	SHOBJ_LD=ld
-	SHOBJ_LDFLAGS='-G -dy -z text -h $@'
-
-	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
-	;;
-
-dgux*-*gcc*)
-	SHOBJ_CFLAGS=-fpic
-	SHOBJ_LD='${CC}'
-	SHOBJ_LDFLAGS='-shared'
-
-	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
-	;;
-
-dgux*)
-	SHOBJ_CFLAGS='-K pic'
-	SHOBJ_LD=ld
-	SHOBJ_LDFLAGS='-G -dy -h $@'
-
-	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
-	;;
-
-msdos*)
-	SHOBJ_STATUS=unsupported
-	SHLIB_STATUS=unsupported
-	;;
-
-cygwin*)
-	SHOBJ_LD='$(CC)'
-	SHOBJ_LDFLAGS='-shared -Wl,--enable-auto-import -Wl,--enable-auto-image-base -Wl,--export-all -Wl,--out-implib=$(@).a'
-	SHLIB_LIBPREF='cyg'
-	SHLIB_LIBSUFF='dll'
-	SHLIB_LIBVERSION='$(SHLIB_DLLVERSION).$(SHLIB_LIBSUFF)'
-	SHLIB_LIBS='$(TERMCAP_LIB)'
-
-	SHLIB_DOT=
-	# For official cygwin releases, DLLVERSION will be defined in the
-	# environment of configure, and will be incremented any time the API
-	# changes in a non-backwards compatible manner.  Otherwise, it is just
-	# SHLIB_MAJOR.
-	if [ -n "$DLLVERSION" ] ; then
-		SHLIB_DLLVERSION="$DLLVERSION"
-	fi
-	;;
-
-mingw*)
-	SHOBJ_LD='$(CC)'
-	SHOBJ_LDFLAGS='-shared -Wl,--enable-auto-import -Wl,--enable-auto-image-base -Wl,--export-all -Wl,--out-implib=$(@).a'
-	SHLIB_LIBSUFF='dll'
-	SHLIB_LIBVERSION='$(SHLIB_DLLVERSION).$(SHLIB_LIBSUFF)'
-	SHLIB_LIBS='$(TERMCAP_LIB)'
-
-	SHLIB_DOT=
-	# For official cygwin releases, DLLVERSION will be defined in the
-	# environment of configure, and will be incremented any time the API
-	# changes in a non-backwards compatible manner.  Otherwise, it is just
-	# SHLIB_MAJOR.
-	if [ -n "$DLLVERSION" ] ; then
-		SHLIB_DLLVERSION="$DLLVERSION"
-	fi
-	;;
-
-#
-# Rely on correct gcc configuration for everything else
-#
-*-*gcc*)
-	SHOBJ_CFLAGS=-fpic
-	SHOBJ_LD='${CC}'
-	SHOBJ_LDFLAGS='-shared'
-
-	SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
-	;;
-
-*)
-	SHOBJ_STATUS=unsupported
-	SHLIB_STATUS=unsupported
-	;;
-
-esac
-
-echo SHOBJ_CC=\'"$SHOBJ_CC"\'
-echo SHOBJ_CFLAGS=\'"$SHOBJ_CFLAGS"\'
-echo SHOBJ_LD=\'"$SHOBJ_LD"\'
-echo SHOBJ_LDFLAGS=\'"$SHOBJ_LDFLAGS"\'
-echo SHOBJ_XLDFLAGS=\'"$SHOBJ_XLDFLAGS"\'
-echo SHOBJ_LIBS=\'"$SHOBJ_LIBS"\'
-
-echo SHLIB_XLDFLAGS=\'"$SHLIB_XLDFLAGS"\'
-echo SHLIB_LIBS=\'"$SHLIB_LIBS"\'
-
-echo SHLIB_DOT=\'"$SHLIB_DOT"\'
-
-echo SHLIB_LIBPREF=\'"$SHLIB_LIBPREF"\'
-echo SHLIB_LIBSUFF=\'"$SHLIB_LIBSUFF"\'
-
-echo SHLIB_LIBVERSION=\'"$SHLIB_LIBVERSION"\'
-echo SHLIB_DLLVERSION=\'"$SHLIB_DLLVERSION"\'
-
-echo SHOBJ_STATUS=\'"$SHOBJ_STATUS"\'
-echo SHLIB_STATUS=\'"$SHLIB_STATUS"\'
-
-exit 0
diff --git a/readline/support/wcwidth.c b/readline/support/wcwidth.c
deleted file mode 100644
index 0f5ec99..0000000
--- a/readline/support/wcwidth.c
+++ /dev/null
@@ -1,313 +0,0 @@
-/*
- * This is an implementation of wcwidth() and wcswidth() (defined in
- * IEEE Std 1002.1-2001) for Unicode.
- *
- * http://www.opengroup.org/onlinepubs/007904975/functions/wcwidth.html
- * http://www.opengroup.org/onlinepubs/007904975/functions/wcswidth.html
- *
- * In fixed-width output devices, Latin characters all occupy a single
- * "cell" position of equal width, whereas ideographic CJK characters
- * occupy two such cells. Interoperability between terminal-line
- * applications and (teletype-style) character terminals using the
- * UTF-8 encoding requires agreement on which character should advance
- * the cursor by how many cell positions. No established formal
- * standards exist at present on which Unicode character shall occupy
- * how many cell positions on character terminals. These routines are
- * a first attempt of defining such behavior based on simple rules
- * applied to data provided by the Unicode Consortium.
- *
- * For some graphical characters, the Unicode standard explicitly
- * defines a character-cell width via the definition of the East Asian
- * FullWidth (F), Wide (W), Half-width (H), and Narrow (Na) classes.
- * In all these cases, there is no ambiguity about which width a
- * terminal shall use. For characters in the East Asian Ambiguous (A)
- * class, the width choice depends purely on a preference of backward
- * compatibility with either historic CJK or Western practice.
- * Choosing single-width for these characters is easy to justify as
- * the appropriate long-term solution, as the CJK practice of
- * displaying these characters as double-width comes from historic
- * implementation simplicity (8-bit encoded characters were displayed
- * single-width and 16-bit ones double-width, even for Greek,
- * Cyrillic, etc.) and not any typographic considerations.
- *
- * Much less clear is the choice of width for the Not East Asian
- * (Neutral) class. Existing practice does not dictate a width for any
- * of these characters. It would nevertheless make sense
- * typographically to allocate two character cells to characters such
- * as for instance EM SPACE or VOLUME INTEGRAL, which cannot be
- * represented adequately with a single-width glyph. The following
- * routines at present merely assign a single-cell width to all
- * neutral characters, in the interest of simplicity. This is not
- * entirely satisfactory and should be reconsidered before
- * establishing a formal standard in this area. At the moment, the
- * decision which Not East Asian (Neutral) characters should be
- * represented by double-width glyphs cannot yet be answered by
- * applying a simple rule from the Unicode database content. Setting
- * up a proper standard for the behavior of UTF-8 character terminals
- * will require a careful analysis not only of each Unicode character,
- * but also of each presentation form, something the author of these
- * routines has avoided to do so far.
- *
- * http://www.unicode.org/unicode/reports/tr11/
- *
- * Markus Kuhn -- 2007-05-26 (Unicode 5.0)
- *
- * Permission to use, copy, modify, and distribute this software
- * for any purpose and without fee is hereby granted. The author
- * disclaims all warranties with regard to this software.
- *
- * Latest version: http://www.cl.cam.ac.uk/~mgk25/ucs/wcwidth.c
- */
-
-#ifdef __GO32__
-#  include <wctype.h>
-#endif
-
-#include <wchar.h>
-
-struct interval {
-  int first;
-  int last;
-};
-
-/* auxiliary function for binary search in interval table */
-static int bisearch(wchar_t ucs, const struct interval *table, int max) {
-  int min = 0;
-  int mid;
-
-  if (ucs < table[0].first || ucs > table[max].last)
-    return 0;
-  while (max >= min) {
-    mid = (min + max) / 2;
-    if (ucs > table[mid].last)
-      min = mid + 1;
-    else if (ucs < table[mid].first)
-      max = mid - 1;
-    else
-      return 1;
-  }
-
-  return 0;
-}
-
-
-/* The following two functions define the column width of an ISO 10646
- * character as follows:
- *
- *    - The null character (U+0000) has a column width of 0.
- *
- *    - Other C0/C1 control characters and DEL will lead to a return
- *      value of -1.
- *
- *    - Non-spacing and enclosing combining characters (general
- *      category code Mn or Me in the Unicode database) have a
- *      column width of 0.
- *
- *    - SOFT HYPHEN (U+00AD) has a column width of 1.
- *
- *    - Other format characters (general category code Cf in the Unicode
- *      database) and ZERO WIDTH SPACE (U+200B) have a column width of 0.
- *
- *    - Hangul Jamo medial vowels and final consonants (U+1160-U+11FF)
- *      have a column width of 0.
- *
- *    - Spacing characters in the East Asian Wide (W) or East Asian
- *      Full-width (F) category as defined in Unicode Technical
- *      Report #11 have a column width of 2.
- *
- *    - All remaining characters (including all printable
- *      ISO 8859-1 and WGL4 characters, Unicode control characters,
- *      etc.) have a column width of 1.
- *
- * This implementation assumes that wchar_t characters are encoded
- * in ISO 10646.
- */
-
-int mk_wcwidth(wchar_t ucs)
-{
-  /* sorted list of non-overlapping intervals of non-spacing characters */
-  /* generated by "uniset +cat=Me +cat=Mn +cat=Cf -00AD +1160-11FF +200B c" */
-  static const struct interval combining[] = {
-    { 0x0300, 0x036F }, { 0x0483, 0x0486 }, { 0x0488, 0x0489 },
-    { 0x0591, 0x05BD }, { 0x05BF, 0x05BF }, { 0x05C1, 0x05C2 },
-    { 0x05C4, 0x05C5 }, { 0x05C7, 0x05C7 }, { 0x0600, 0x0603 },
-    { 0x0610, 0x0615 }, { 0x064B, 0x065E }, { 0x0670, 0x0670 },
-    { 0x06D6, 0x06E4 }, { 0x06E7, 0x06E8 }, { 0x06EA, 0x06ED },
-    { 0x070F, 0x070F }, { 0x0711, 0x0711 }, { 0x0730, 0x074A },
-    { 0x07A6, 0x07B0 }, { 0x07EB, 0x07F3 }, { 0x0901, 0x0902 },
-    { 0x093C, 0x093C }, { 0x0941, 0x0948 }, { 0x094D, 0x094D },
-    { 0x0951, 0x0954 }, { 0x0962, 0x0963 }, { 0x0981, 0x0981 },
-    { 0x09BC, 0x09BC }, { 0x09C1, 0x09C4 }, { 0x09CD, 0x09CD },
-    { 0x09E2, 0x09E3 }, { 0x0A01, 0x0A02 }, { 0x0A3C, 0x0A3C },
-    { 0x0A41, 0x0A42 }, { 0x0A47, 0x0A48 }, { 0x0A4B, 0x0A4D },
-    { 0x0A70, 0x0A71 }, { 0x0A81, 0x0A82 }, { 0x0ABC, 0x0ABC },
-    { 0x0AC1, 0x0AC5 }, { 0x0AC7, 0x0AC8 }, { 0x0ACD, 0x0ACD },
-    { 0x0AE2, 0x0AE3 }, { 0x0B01, 0x0B01 }, { 0x0B3C, 0x0B3C },
-    { 0x0B3F, 0x0B3F }, { 0x0B41, 0x0B43 }, { 0x0B4D, 0x0B4D },
-    { 0x0B56, 0x0B56 }, { 0x0B82, 0x0B82 }, { 0x0BC0, 0x0BC0 },
-    { 0x0BCD, 0x0BCD }, { 0x0C3E, 0x0C40 }, { 0x0C46, 0x0C48 },
-    { 0x0C4A, 0x0C4D }, { 0x0C55, 0x0C56 }, { 0x0CBC, 0x0CBC },
-    { 0x0CBF, 0x0CBF }, { 0x0CC6, 0x0CC6 }, { 0x0CCC, 0x0CCD },
-    { 0x0CE2, 0x0CE3 }, { 0x0D41, 0x0D43 }, { 0x0D4D, 0x0D4D },
-    { 0x0DCA, 0x0DCA }, { 0x0DD2, 0x0DD4 }, { 0x0DD6, 0x0DD6 },
-    { 0x0E31, 0x0E31 }, { 0x0E34, 0x0E3A }, { 0x0E47, 0x0E4E },
-    { 0x0EB1, 0x0EB1 }, { 0x0EB4, 0x0EB9 }, { 0x0EBB, 0x0EBC },
-    { 0x0EC8, 0x0ECD }, { 0x0F18, 0x0F19 }, { 0x0F35, 0x0F35 },
-    { 0x0F37, 0x0F37 }, { 0x0F39, 0x0F39 }, { 0x0F71, 0x0F7E },
-    { 0x0F80, 0x0F84 }, { 0x0F86, 0x0F87 }, { 0x0F90, 0x0F97 },
-    { 0x0F99, 0x0FBC }, { 0x0FC6, 0x0FC6 }, { 0x102D, 0x1030 },
-    { 0x1032, 0x1032 }, { 0x1036, 0x1037 }, { 0x1039, 0x1039 },
-    { 0x1058, 0x1059 }, { 0x1160, 0x11FF }, { 0x135F, 0x135F },
-    { 0x1712, 0x1714 }, { 0x1732, 0x1734 }, { 0x1752, 0x1753 },
-    { 0x1772, 0x1773 }, { 0x17B4, 0x17B5 }, { 0x17B7, 0x17BD },
-    { 0x17C6, 0x17C6 }, { 0x17C9, 0x17D3 }, { 0x17DD, 0x17DD },
-    { 0x180B, 0x180D }, { 0x18A9, 0x18A9 }, { 0x1920, 0x1922 },
-    { 0x1927, 0x1928 }, { 0x1932, 0x1932 }, { 0x1939, 0x193B },
-    { 0x1A17, 0x1A18 }, { 0x1B00, 0x1B03 }, { 0x1B34, 0x1B34 },
-    { 0x1B36, 0x1B3A }, { 0x1B3C, 0x1B3C }, { 0x1B42, 0x1B42 },
-    { 0x1B6B, 0x1B73 }, { 0x1DC0, 0x1DCA }, { 0x1DFE, 0x1DFF },
-    { 0x200B, 0x200F }, { 0x202A, 0x202E }, { 0x2060, 0x2063 },
-    { 0x206A, 0x206F }, { 0x20D0, 0x20EF }, { 0x302A, 0x302F },
-    { 0x3099, 0x309A }, { 0xA806, 0xA806 }, { 0xA80B, 0xA80B },
-    { 0xA825, 0xA826 }, { 0xFB1E, 0xFB1E }, { 0xFE00, 0xFE0F },
-    { 0xFE20, 0xFE23 }, { 0xFEFF, 0xFEFF }, { 0xFFF9, 0xFFFB },
-    { 0x10A01, 0x10A03 }, { 0x10A05, 0x10A06 }, { 0x10A0C, 0x10A0F },
-    { 0x10A38, 0x10A3A }, { 0x10A3F, 0x10A3F }, { 0x1D167, 0x1D169 },
-    { 0x1D173, 0x1D182 }, { 0x1D185, 0x1D18B }, { 0x1D1AA, 0x1D1AD },
-    { 0x1D242, 0x1D244 }, { 0xE0001, 0xE0001 }, { 0xE0020, 0xE007F },
-    { 0xE0100, 0xE01EF }
-  };
-
-  /* test for 8-bit control characters */
-  if (ucs == 0)
-    return 0;
-  if (ucs < 32 || (ucs >= 0x7f && ucs < 0xa0))
-    return -1;
-
-  /* binary search in table of non-spacing characters */
-  if (bisearch(ucs, combining,
-	       sizeof(combining) / sizeof(struct interval) - 1))
-    return 0;
-
-  /* if we arrive here, ucs is not a combining or C0/C1 control character */
-
-  return 1 + 
-    (ucs >= 0x1100 &&
-     (ucs <= 0x115f ||                    /* Hangul Jamo init. consonants */
-      ucs == 0x2329 || ucs == 0x232a ||
-      (ucs >= 0x2e80 && ucs <= 0xa4cf &&
-       ucs != 0x303f) ||                  /* CJK ... Yi */
-      (ucs >= 0xac00 && ucs <= 0xd7a3) || /* Hangul Syllables */
-      (ucs >= 0xf900 && ucs <= 0xfaff) || /* CJK Compatibility Ideographs */
-      (ucs >= 0xfe10 && ucs <= 0xfe19) || /* Vertical forms */
-      (ucs >= 0xfe30 && ucs <= 0xfe6f) || /* CJK Compatibility Forms */
-      (ucs >= 0xff00 && ucs <= 0xff60) || /* Fullwidth Forms */
-      (ucs >= 0xffe0 && ucs <= 0xffe6) ||
-      (ucs >= 0x20000 && ucs <= 0x2fffd) ||
-      (ucs >= 0x30000 && ucs <= 0x3fffd)));
-}
-
-
-int mk_wcswidth(const wchar_t *pwcs, size_t n)
-{
-  int w, width = 0;
-
-  for (;*pwcs && n-- > 0; pwcs++)
-    if ((w = mk_wcwidth(*pwcs)) < 0)
-      return -1;
-    else
-      width += w;
-
-  return width;
-}
-
-
-/*
- * The following functions are the same as mk_wcwidth() and
- * mk_wcswidth(), except that spacing characters in the East Asian
- * Ambiguous (A) category as defined in Unicode Technical Report #11
- * have a column width of 2. This variant might be useful for users of
- * CJK legacy encodings who want to migrate to UCS without changing
- * the traditional terminal character-width behaviour. It is not
- * otherwise recommended for general use.
- */
-int mk_wcwidth_cjk(wchar_t ucs)
-{
-  /* sorted list of non-overlapping intervals of East Asian Ambiguous
-   * characters, generated by "uniset +WIDTH-A -cat=Me -cat=Mn -cat=Cf c" */
-  static const struct interval ambiguous[] = {
-    { 0x00A1, 0x00A1 }, { 0x00A4, 0x00A4 }, { 0x00A7, 0x00A8 },
-    { 0x00AA, 0x00AA }, { 0x00AE, 0x00AE }, { 0x00B0, 0x00B4 },
-    { 0x00B6, 0x00BA }, { 0x00BC, 0x00BF }, { 0x00C6, 0x00C6 },
-    { 0x00D0, 0x00D0 }, { 0x00D7, 0x00D8 }, { 0x00DE, 0x00E1 },
-    { 0x00E6, 0x00E6 }, { 0x00E8, 0x00EA }, { 0x00EC, 0x00ED },
-    { 0x00F0, 0x00F0 }, { 0x00F2, 0x00F3 }, { 0x00F7, 0x00FA },
-    { 0x00FC, 0x00FC }, { 0x00FE, 0x00FE }, { 0x0101, 0x0101 },
-    { 0x0111, 0x0111 }, { 0x0113, 0x0113 }, { 0x011B, 0x011B },
-    { 0x0126, 0x0127 }, { 0x012B, 0x012B }, { 0x0131, 0x0133 },
-    { 0x0138, 0x0138 }, { 0x013F, 0x0142 }, { 0x0144, 0x0144 },
-    { 0x0148, 0x014B }, { 0x014D, 0x014D }, { 0x0152, 0x0153 },
-    { 0x0166, 0x0167 }, { 0x016B, 0x016B }, { 0x01CE, 0x01CE },
-    { 0x01D0, 0x01D0 }, { 0x01D2, 0x01D2 }, { 0x01D4, 0x01D4 },
-    { 0x01D6, 0x01D6 }, { 0x01D8, 0x01D8 }, { 0x01DA, 0x01DA },
-    { 0x01DC, 0x01DC }, { 0x0251, 0x0251 }, { 0x0261, 0x0261 },
-    { 0x02C4, 0x02C4 }, { 0x02C7, 0x02C7 }, { 0x02C9, 0x02CB },
-    { 0x02CD, 0x02CD }, { 0x02D0, 0x02D0 }, { 0x02D8, 0x02DB },
-    { 0x02DD, 0x02DD }, { 0x02DF, 0x02DF }, { 0x0391, 0x03A1 },
-    { 0x03A3, 0x03A9 }, { 0x03B1, 0x03C1 }, { 0x03C3, 0x03C9 },
-    { 0x0401, 0x0401 }, { 0x0410, 0x044F }, { 0x0451, 0x0451 },
-    { 0x2010, 0x2010 }, { 0x2013, 0x2016 }, { 0x2018, 0x2019 },
-    { 0x201C, 0x201D }, { 0x2020, 0x2022 }, { 0x2024, 0x2027 },
-    { 0x2030, 0x2030 }, { 0x2032, 0x2033 }, { 0x2035, 0x2035 },
-    { 0x203B, 0x203B }, { 0x203E, 0x203E }, { 0x2074, 0x2074 },
-    { 0x207F, 0x207F }, { 0x2081, 0x2084 }, { 0x20AC, 0x20AC },
-    { 0x2103, 0x2103 }, { 0x2105, 0x2105 }, { 0x2109, 0x2109 },
-    { 0x2113, 0x2113 }, { 0x2116, 0x2116 }, { 0x2121, 0x2122 },
-    { 0x2126, 0x2126 }, { 0x212B, 0x212B }, { 0x2153, 0x2154 },
-    { 0x215B, 0x215E }, { 0x2160, 0x216B }, { 0x2170, 0x2179 },
-    { 0x2190, 0x2199 }, { 0x21B8, 0x21B9 }, { 0x21D2, 0x21D2 },
-    { 0x21D4, 0x21D4 }, { 0x21E7, 0x21E7 }, { 0x2200, 0x2200 },
-    { 0x2202, 0x2203 }, { 0x2207, 0x2208 }, { 0x220B, 0x220B },
-    { 0x220F, 0x220F }, { 0x2211, 0x2211 }, { 0x2215, 0x2215 },
-    { 0x221A, 0x221A }, { 0x221D, 0x2220 }, { 0x2223, 0x2223 },
-    { 0x2225, 0x2225 }, { 0x2227, 0x222C }, { 0x222E, 0x222E },
-    { 0x2234, 0x2237 }, { 0x223C, 0x223D }, { 0x2248, 0x2248 },
-    { 0x224C, 0x224C }, { 0x2252, 0x2252 }, { 0x2260, 0x2261 },
-    { 0x2264, 0x2267 }, { 0x226A, 0x226B }, { 0x226E, 0x226F },
-    { 0x2282, 0x2283 }, { 0x2286, 0x2287 }, { 0x2295, 0x2295 },
-    { 0x2299, 0x2299 }, { 0x22A5, 0x22A5 }, { 0x22BF, 0x22BF },
-    { 0x2312, 0x2312 }, { 0x2460, 0x24E9 }, { 0x24EB, 0x254B },
-    { 0x2550, 0x2573 }, { 0x2580, 0x258F }, { 0x2592, 0x2595 },
-    { 0x25A0, 0x25A1 }, { 0x25A3, 0x25A9 }, { 0x25B2, 0x25B3 },
-    { 0x25B6, 0x25B7 }, { 0x25BC, 0x25BD }, { 0x25C0, 0x25C1 },
-    { 0x25C6, 0x25C8 }, { 0x25CB, 0x25CB }, { 0x25CE, 0x25D1 },
-    { 0x25E2, 0x25E5 }, { 0x25EF, 0x25EF }, { 0x2605, 0x2606 },
-    { 0x2609, 0x2609 }, { 0x260E, 0x260F }, { 0x2614, 0x2615 },
-    { 0x261C, 0x261C }, { 0x261E, 0x261E }, { 0x2640, 0x2640 },
-    { 0x2642, 0x2642 }, { 0x2660, 0x2661 }, { 0x2663, 0x2665 },
-    { 0x2667, 0x266A }, { 0x266C, 0x266D }, { 0x266F, 0x266F },
-    { 0x273D, 0x273D }, { 0x2776, 0x277F }, { 0xE000, 0xF8FF },
-    { 0xFFFD, 0xFFFD }, { 0xF0000, 0xFFFFD }, { 0x100000, 0x10FFFD }
-  };
-
-  /* binary search in table of non-spacing characters */
-  if (bisearch(ucs, ambiguous,
-	       sizeof(ambiguous) / sizeof(struct interval) - 1))
-    return 2;
-
-  return mk_wcwidth(ucs);
-}
-
-
-int mk_wcswidth_cjk(const wchar_t *pwcs, size_t n)
-{
-  int w, width = 0;
-
-  for (;*pwcs && n-- > 0; pwcs++)
-    if ((w = mk_wcwidth_cjk(*pwcs)) < 0)
-      return -1;
-    else
-      width += w;
-
-  return width;
-}