The following changes were made by Jim Blandy

 	<jimb@zwingli.cygnus.com> and David Taylor
 	<taylor@texas.cygnus.com> as part of a project to merge in changes
 	made by HP; HP did not create ChangeLog entries.

	* config/mp-enable-tui: New file.
	(TUI_CFLAGS): Search devo's include directory, as long as we're
 	totally ruining modularity.
	(INCLUDE_SRCDIR): New var.
	(GDB_TUI_SRCDIR): Fix syntax error.

	* configure.in: Check the --enable-tui flag; if it's set, include
 	a makefile fragment that #defines TUI and adds the needed #include
 	directories.
	(*-*-hpux*): New host; use sysdep-hpux.h.

	* Makefile.in (.c.o): Check the variable set in the makefile
	fragment above.

	* display.c (term_goto): declare it.
	(insert_some_chars): set it.
	(delete_chars): set it.

	* readline.c: add tui include files surrounded by TUI.
	(rl_reset): new function, move some of rl_abort functionality to
 	here.
	(rl_abort): call rl_reset.
	(rl_getc): tui changes.
	(init_terminal_io): tui changes.

	* readline.h (tui_version, fputc_unfiltered, fputs_unfiltered,
	tui_tputs): declare if TUI is defined.

	* rltty.c (prepare_terminal_settings): additional comment.

	* signals.c: add tui include files surrounded by TUI.  move #if
 	and #endif to column 1 so HP's compiler will accept them.  Remove
 	declaration of tuiDoAndReturnToTop since it's declared in tui.h.
	(rl_handle_sigwinch): call tuiDoAndReturnToTop if TUI defined.
  	(rl_handle_sigwinch_on_clear): define if TUI defined.
	(rl_set_signals): if TUI, avoid infinite recursion.
	(rl_clear_signals): install rl_handle_sigwinch_on_clear.

	* sysdep-hpux.h: New file.

3 files changed, 21 insertions, 17 deletions

diff --git a/readline/doc/ChangeLog b/readline/doc/ChangeLog
index 2520a85..43e1073 100644
--- a/readline/doc/ChangeLog
+++ b/readline/doc/ChangeLog
@@ -1,3 +1,7 @@
+Thu Jul  9 17:03:26 1998  Edith Epstein  <eepstein@sophia.cygnus.com>
+
+	* inc-hist.texi: one line change.
+
 Wed Sep 20 12:57:29 1995  Ian Lance Taylor  <ian@cygnus.com>
 
 	* Makefile.in (maintainer-clean): New synonym for realclean.
diff --git a/readline/doc/inc-hist.texi b/readline/doc/inc-hist.texi
index 9cdde40..f55f7ae 100644
--- a/readline/doc/inc-hist.texi
+++ b/readline/doc/inc-hist.texi
@@ -27,7 +27,7 @@ Permission is granted to copy and distribute translations of this manual
 into another language, under the above conditions for modified versions.
 @end ignore
 
-@node Using History Interactively
+@node Using History, Installing GDB, Command Line Editing, Top
 @appendix Using History Interactively
 
 This chapter describes how to use the GNU History Library interactively,
diff --git a/readline/doc/rluser.texinfo b/readline/doc/rluser.texinfo
index da11111..fb37f52 100644
--- a/readline/doc/rluser.texinfo
+++ b/readline/doc/rluser.texinfo
@@ -39,7 +39,7 @@ This text describes GNU's command line editing interface.
 * Readline Init File::		Customizing Readline from a user's view.
 @end menu
 
-@node Introduction and Notation
+@node Introduction and Notation, Readline Interaction, Command Line Editing, Command Line Editing
 @section Introduction to Line Editing
 
 The following paragraphs describe the notation we use to represent
@@ -62,7 +62,7 @@ In addition, several keys have their own names.  Specifically,
 stand for themselves when seen in this text, or in an init file
 (@pxref{Readline Init File}, for more info).
 
-@node Readline Interaction
+@node Readline Interaction, Readline Init File, Introduction and Notation, Command Line Editing
 @section Readline Interaction
 @cindex interaction, readline
 
@@ -84,7 +84,7 @@ regardless of the location of the cursor within the line.
 * Readline Arguments::		Giving numeric arguments to commands.
 @end menu
 
-@node Readline Bare Essentials
+@node Readline Bare Essentials, Readline Movement Commands, Readline Interaction, Readline Interaction
 @subsection Readline Bare Essentials
 
 In order to enter characters into the line, simply type them.  The typed
@@ -121,7 +121,7 @@ Undo the last thing that you did.  You can undo all the way back to an
 empty line.
 @end table
 
-@node Readline Movement Commands
+@node Readline Movement Commands, Readline Killing Commands, Readline Bare Essentials, Readline Interaction
 @subsection Readline Movement Commands
 
 The above table describes the most basic possible keystrokes that you need
@@ -147,7 +147,7 @@ Notice how @key{C-f} moves forward a character, while @key{M-f} moves
 forward a word.  It is a loose convention that control keystrokes
 operate on characters while meta keystrokes operate on words.
 
-@node Readline Killing Commands
+@node Readline Killing Commands, Readline Arguments, Readline Movement Commands, Readline Interaction
 @subsection Readline Killing Commands
 
 @dfn{Killing} text means to delete the text from the line, but to save
@@ -194,7 +194,7 @@ ring is not line specific; the text that you killed on a previously
 typed line is available to be yanked back later, when you are typing
 another line.
 
-@node Readline Arguments
+@node Readline Arguments,, Readline Killing Commands, Readline Interaction
 @subsection Readline Arguments
 
 You can pass numeric arguments to Readline commands.  Sometimes the
@@ -212,7 +212,7 @@ the remainder of the digits, and then the command.  For example, to give
 the @key{C-d} command an argument of 10, you could type @key{M-1 0 C-d}.
 
 
-@node Readline Init File
+@node Readline Init File,, Readline Interaction, Command Line Editing
 @section Readline Init File
 
 Although the Readline library comes with a set of @sc{gnu} Emacs-like
@@ -232,7 +232,7 @@ incorporating any changes that you might have made to it.
 * Readline vi Mode::		Switching to @code{vi} mode in Readline.
 @end menu
 
-@node Readline Init Syntax
+@node Readline Init Syntax, Readline vi Mode, Readline Init File, Readline Init File
 @subsection Readline Init Syntax
 
 There are only four constructs allowed in the @file{~/.inputrc}
@@ -339,7 +339,7 @@ In the above example, @key{C-u} is bound to the function
 @end menu
 
 @need 2000
-@node Commands For Moving
+@node Commands For Moving, Commands For History, Readline Init Syntax, Readline Init Syntax
 @subsubsection Commands For Moving
 
 @ftable @code
@@ -367,7 +367,7 @@ Clear the screen leaving the current line at the top of the screen.
 @end ftable
 
 @need 2000
-@node Commands For History
+@node Commands For History, Commands For Text, Commands For Moving, Readline Init Syntax
 @subsubsection Commands For Manipulating The History
 
 @ftable @code
@@ -399,7 +399,7 @@ the the history as necessary.
 @end ftable
 
 @need 2000
-@node Commands For Text
+@node Commands For Text, Commands For Killing, Commands For History, Readline Init Syntax
 @subsubsection Commands For Changing Text
 
 @ftable @code
@@ -446,7 +446,7 @@ negative argument, do the previous word, but do not move point.
 @end ftable
 
 @need 2000
-@node Commands For Killing
+@node Commands For Killing, Numeric Arguments, Commands For Text, Readline Init Syntax
 @subsubsection Killing And Yanking
 
 @ftable @code
@@ -481,7 +481,7 @@ the prior command is yank or yank-pop.
 @end ftable
 
 @need 2000
-@node Numeric Arguments
+@node Numeric Arguments, Commands For Completion, Commands For Killing, Readline Init Syntax
 @subsubsection Specifying Numeric Arguments
 
 @ftable @code
@@ -496,7 +496,7 @@ Do what @key{C-u} does in @sc{gnu} Emacs.  By default, this is not bound.
 
 
 @need 2000
-@node Commands For Completion
+@node Commands For Completion, Miscellaneous Commands, Numeric Arguments, Readline Init Syntax
 @subsubsection Letting Readline Type For You
 
 @ftable @code
@@ -513,7 +513,7 @@ List the possible completions of the text before point.
 @end ftable
 
 @need 2000
-@node Miscellaneous Commands
+@node Miscellaneous Commands,, Commands For Completion, Readline Init Syntax
 @subsubsection Some Miscellaneous Commands
 
 @ftable @code
@@ -547,7 +547,7 @@ command enough times to get back to the beginning.
 @end ftable
 
 @need 2000
-@node Readline vi Mode
+@node Readline vi Mode,, Readline Init Syntax, Readline Init File
 @subsection Readline @code{vi} Mode
 
 @cindex @code{vi} style command editing