aboutsummaryrefslogtreecommitdiff
path: root/gdb
diff options
context:
space:
mode:
authorVladimir Prus <vladimir@codesourcery.com>2008-04-24 10:21:45 +0000
committerVladimir Prus <vladimir@codesourcery.com>2008-04-24 10:21:45 +0000
commit74960c600257a48df8589c16b527ab6f56d1a664 (patch)
tree2a264bfb2395188a5bf167030220fcaf87f6dcb2 /gdb
parentd24317b4805503c9a018e77ee4683c87678f11ff (diff)
downloadgdb-74960c600257a48df8589c16b527ab6f56d1a664.zip
gdb-74960c600257a48df8589c16b527ab6f56d1a664.tar.gz
gdb-74960c600257a48df8589c16b527ab6f56d1a664.tar.bz2
* breakpoint.h (bp_location_p): New typedef.
Register a vector of bp_location_p. * breakpoint.c (always_inserted_mode) (show_always_inserted_mode): New. (unlink_locations_from_global_list): Remove. (update_global_location_list) (update_global_location_list_nothrow): New. (update_watchpoint): Don't free locations. (should_insert_location): New. (insert_bp_location): Use should_insert_location. (insert_breakpoint_locations): Copied from insert_breakpoints. (insert_breakpoint): Use insert_breakpoint_locations. (bpstat_stop_status): Call update_global_location_list when disabling breakpoint. (allocate_bp_location): Don't add to bp_location_chain. (set_raw_breakpoint) (create_longjmp_breakpoint, enable_longjmp_breakpoint) (disable_longjmp_breakpoint, create_overlay_event_breakpoint) (enable_overlay_breakpoints, disable_overlay_breakpoints) (set_longjmp_resume_breakpoint) (enable_watchpoints_after_interactive_call_stop) (disable_watchpoints_before_interactive_call_start) (create_internal_breakpoint) (create_fork_vfork_event_catchpoint) (create_exec_event_catchpoint, set_momentary_breakpoint) (create_breakpoints, break_command_1, watch_command_1) (create_exception_catchpoint) (handle_gnu_v3_exceptions) (disable_breakpoint, breakpoint_re_set_one) (create_thread_event_breakpoint, create_solib_event_breakpoint) (create_ada_exception_breakpoint): : Don't call check_duplicates. Call update_global_location_list. (delete_breakpoint): Don't remove locations and don't try to reinsert them. Call update_global_location_list. (update_breakpoint_locations): Likewise. (restore_always_inserted_mode): New. (update_breakpoints_after_exec): Temporary disable always inserted mode. * Makefile.in: Update dependencies. * infrun.c (proceed): Remove breakpoints while stepping over breakpoint. (handle_inferior_event): Don't remove or insert breakpoints. * linux-fork.c (checkpoint_command): Remove breakpoints before fork and insert after. (linux_fork_context): Remove breakpoints before switch and insert after. * target.c (target_disconnect, target_detach): Remove breakpoints from target.
Diffstat (limited to 'gdb')
-rw-r--r--gdb/ChangeLog55
-rw-r--r--gdb/Makefile.in3
-rw-r--r--gdb/NEWS6
-rw-r--r--gdb/breakpoint.c445
-rw-r--r--gdb/breakpoint.h5
-rw-r--r--gdb/doc/gdb.texinfo24
-rw-r--r--gdb/infrun.c57
-rw-r--r--gdb/linux-fork.c7
-rw-r--r--gdb/target.c8
-rw-r--r--gdb/testsuite/ChangeLog7
-rw-r--r--gdb/testsuite/gdb.base/break-always.c32
-rw-r--r--gdb/testsuite/gdb.base/break-always.exp32
-rw-r--r--gdb/testsuite/lib/gdb.exp4
13 files changed, 474 insertions, 211 deletions
diff --git a/gdb/ChangeLog b/gdb/ChangeLog
index f9742dc..806173c 100644
--- a/gdb/ChangeLog
+++ b/gdb/ChangeLog
@@ -1,5 +1,60 @@
2008-04-24 Vladimir Prus <vladimir@codesourcery.com>
+ * breakpoint.h (bp_location_p): New typedef.
+ Register a vector of bp_location_p.
+ * breakpoint.c (always_inserted_mode)
+ (show_always_inserted_mode): New.
+ (unlink_locations_from_global_list): Remove.
+ (update_global_location_list)
+ (update_global_location_list_nothrow): New.
+ (update_watchpoint): Don't free locations.
+ (should_insert_location): New.
+ (insert_bp_location): Use should_insert_location.
+ (insert_breakpoint_locations): Copied from
+ insert_breakpoints.
+ (insert_breakpoint): Use insert_breakpoint_locations.
+ (bpstat_stop_status): Call update_global_location_list
+ when disabling breakpoint.
+ (allocate_bp_location): Don't add to bp_location_chain.
+ (set_raw_breakpoint)
+ (create_longjmp_breakpoint, enable_longjmp_breakpoint)
+ (disable_longjmp_breakpoint, create_overlay_event_breakpoint)
+ (enable_overlay_breakpoints, disable_overlay_breakpoints)
+ (set_longjmp_resume_breakpoint)
+ (enable_watchpoints_after_interactive_call_stop)
+ (disable_watchpoints_before_interactive_call_start)
+ (create_internal_breakpoint)
+ (create_fork_vfork_event_catchpoint)
+ (create_exec_event_catchpoint, set_momentary_breakpoint)
+ (create_breakpoints, break_command_1, watch_command_1)
+ (create_exception_catchpoint)
+ (handle_gnu_v3_exceptions)
+ (disable_breakpoint, breakpoint_re_set_one)
+ (create_thread_event_breakpoint, create_solib_event_breakpoint)
+ (create_ada_exception_breakpoint): : Don't call check_duplicates.
+ Call update_global_location_list.
+ (delete_breakpoint): Don't remove locations and don't
+ try to reinsert them. Call update_global_location_list.
+ (update_breakpoint_locations): Likewise.
+ (restore_always_inserted_mode): New.
+ (update_breakpoints_after_exec): Temporary disable
+ always inserted mode.
+ * Makefile.in: Update dependencies.
+
+ * infrun.c (proceed): Remove breakpoints while stepping
+ over breakpoint.
+ (handle_inferior_event): Don't remove or insert
+ breakpoints.
+ * linux-fork.c (checkpoint_command): Remove breakpoints
+ before fork and insert after.
+ (linux_fork_context): Remove breakpoints before switch
+ and insert after.
+ * target.c (target_disconnect, target_detach): Remove
+ breakpoints from target.
+
+
+2008-04-24 Vladimir Prus <vladimir@codesourcery.com>
+
* breakpoint.c (print_one_breakpoint_location): In MI
mode, report the location string the breakpoint was
originally created with.
diff --git a/gdb/Makefile.in b/gdb/Makefile.in
index ba5f6ac..9304bc2 100644
--- a/gdb/Makefile.in
+++ b/gdb/Makefile.in
@@ -1974,7 +1974,8 @@ breakpoint.o: breakpoint.c $(defs_h) $(symtab_h) $(frame_h) $(breakpoint_h) \
$(objfiles_h) $(source_h) $(linespec_h) $(completer_h) $(gdb_h) \
$(ui_out_h) $(cli_script_h) $(gdb_assert_h) $(block_h) $(solib_h) \
$(solist_h) $(observer_h) $(exceptions_h) $(gdb_events_h) \
- $(mi_common_h) $(memattr_h) $(ada_lang_h) $(top_h) $(hashtab_h)
+ $(mi_common_h) $(memattr_h) $(ada_lang_h) $(top_h) $(hashtab_h) \
+ $(gdb_stdint_h)
bsd-kvm.o: bsd-kvm.c $(defs_h) $(cli_cmds_h) $(command_h) $(frame_h) \
$(regcache_h) $(target_h) $(value_h) $(gdbcore_h) $(gdb_assert_h) \
$(readline_h) $(bsd_kvm_h)
diff --git a/gdb/NEWS b/gdb/NEWS
index 2af9883..fcda6d1 100644
--- a/gdb/NEWS
+++ b/gdb/NEWS
@@ -43,6 +43,12 @@ show multiple-symbols
when an expression or a breakpoint location contains an ambiguous symbol
name (an overloaded function name, for instance).
+set breakpoint always-inserted
+show breakpoint always-inserted
+ Keep breakpoints always inserted in the target, as opposed to inserting
+ them when resuming the target, and removing them when the target stops.
+ This option can improve debugger performance on slow remote targets.
+
*** Changes in GDB 6.8
* New native configurations
diff --git a/gdb/breakpoint.c b/gdb/breakpoint.c
index 1ba9570..84802ef 100644
--- a/gdb/breakpoint.c
+++ b/gdb/breakpoint.c
@@ -60,6 +60,8 @@
#include "gdb-events.h"
#include "mi/mi-common.h"
+#include "gdb_stdint.h"
+
/* Prototypes for local functions. */
static void until_break_command_continuation (struct continuation_arg *arg);
@@ -205,11 +207,13 @@ static void mark_breakpoints_out (void);
static struct bp_location *
allocate_bp_location (struct breakpoint *bpt, enum bptype bp_type);
-static void
-unlink_locations_from_global_list (struct breakpoint *bpt);
+static void update_global_location_list (void);
-static int
-is_hardware_watchpoint (struct breakpoint *bpt);
+static void update_global_location_list_nothrow (void);
+
+static int is_hardware_watchpoint (struct breakpoint *bpt);
+
+static void insert_breakpoint_locations (void);
static const char *
bpdisp_text (enum bpdisp disp)
@@ -265,6 +269,18 @@ Automatic usage of hardware breakpoints is %s.\n"),
value);
}
+/* If 1, gdb will keep breakpoints inserted even as inferior is stopped,
+ and immediately insert any new breakpoints. If 0, gdb will insert
+ breakpoints into inferior only when resuming it, and will remove
+ breakpoints upon stop. */
+static int always_inserted_mode = 0;
+static void
+show_always_inserted_mode (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("Always inserted breakpoint mode is %s.\n"), value);
+}
+
void _initialize_breakpoint (void);
@@ -875,14 +891,10 @@ update_watchpoint (struct breakpoint *b, int reparse)
struct bp_location *loc;
bpstat bs;
- unlink_locations_from_global_list (b);
- for (loc = b->loc; loc;)
- {
- struct bp_location *loc_next = loc->next;
- remove_breakpoint (loc, mark_uninserted);
- xfree (loc);
- loc = loc_next;
- }
+ /* We don't free locations. They are stored in
+ bp_location_chain and update_global_locations will
+ eventually delete them and remove breakpoints if
+ needed. */
b->loc = NULL;
if (b->disposition == disp_del_at_next_stop)
@@ -1020,6 +1032,23 @@ in which its expression is valid.\n"),
}
+/* Returns 1 iff breakpoint location should be
+ inserted in the inferior. */
+static int
+should_be_inserted (struct bp_location *bpt)
+{
+ if (!breakpoint_enabled (bpt->owner))
+ return 0;
+
+ if (bpt->owner->disposition == disp_del_at_next_stop)
+ return 0;
+
+ if (!bpt->enabled || bpt->shlib_disabled || bpt->duplicate)
+ return 0;
+
+ return 1;
+}
+
/* Insert a low-level "breakpoint" of some type. BPT is the breakpoint.
Any error messages are printed to TMP_ERROR_STREAM; and DISABLED_BREAKS,
PROCESS_WARNING, and HW_BREAKPOINT_ERROR are used to report problems.
@@ -1034,10 +1063,7 @@ insert_bp_location (struct bp_location *bpt,
{
int val = 0;
- if (!breakpoint_enabled (bpt->owner))
- return 0;
-
- if (!bpt->enabled || bpt->shlib_disabled || bpt->inserted || bpt->duplicate)
+ if (!should_be_inserted (bpt) || bpt->inserted)
return 0;
/* Initialize the target-specific information. */
@@ -1238,13 +1264,35 @@ Note: automatically using hardware breakpoints for read-only addresses.\n"));
return 0;
}
+/* Make sure all breakpoints are inserted in inferior.
+ Throws exception on any error.
+ A breakpoint that is already inserted won't be inserted
+ again, so calling this function twice is safe. */
+void
+insert_breakpoints (void)
+{
+ struct breakpoint *bpt;
+
+ ALL_BREAKPOINTS (bpt)
+ if (is_hardware_watchpoint (bpt))
+ update_watchpoint (bpt, 0 /* don't reparse. */);
+
+ update_global_location_list ();
+
+ if (!always_inserted_mode && target_has_execution)
+ /* update_global_location_list does not insert breakpoints
+ when always_inserted_mode is not enabled. Explicitly
+ insert them now. */
+ insert_breakpoint_locations ();
+}
+
/* insert_breakpoints is used when starting or continuing the program.
remove_breakpoints is used when the program stops.
Both return zero if successful,
or an `errno' value if could not write the inferior. */
-void
-insert_breakpoints (void)
+static void
+insert_breakpoint_locations (void)
{
struct breakpoint *bpt;
struct bp_location *b, *temp;
@@ -1256,18 +1304,14 @@ insert_breakpoints (void)
struct ui_file *tmp_error_stream = mem_fileopen ();
make_cleanup_ui_file_delete (tmp_error_stream);
-
+
/* Explicitly mark the warning -- this will only be printed if
there was an error. */
fprintf_unfiltered (tmp_error_stream, "Warning:\n");
-
- ALL_BREAKPOINTS (bpt)
- if (is_hardware_watchpoint (bpt))
- update_watchpoint (bpt, 0 /* don't reparse */);
ALL_BP_LOCATIONS_SAFE (b, temp)
{
- if (!breakpoint_enabled (b->owner))
+ if (!should_be_inserted (b) || b->inserted)
continue;
/* There is no point inserting thread-specific breakpoints if the
@@ -1295,6 +1339,9 @@ insert_breakpoints (void)
if (bpt->enable_state != bp_enabled)
continue;
+
+ if (bpt->disposition == disp_del_at_next_stop)
+ continue;
for (loc = bpt->loc; loc; loc = loc->next)
if (!loc->inserted)
@@ -1402,17 +1449,31 @@ reattach_breakpoints (int pid)
return 0;
}
+static void
+restore_always_inserted_mode (void *p)
+{
+ always_inserted_mode = (uintptr_t) p;
+}
+
void
update_breakpoints_after_exec (void)
{
struct breakpoint *b;
struct breakpoint *temp;
+ struct cleanup *cleanup;
/* Doing this first prevents the badness of having delete_breakpoint()
write a breakpoint's current "shadow contents" to lift the bp. That
shadow is NOT valid after an exec()! */
mark_breakpoints_out ();
+ /* The binary we used to debug is now gone, and we're updating
+ breakpoints for the new binary. Until we're done, we should not
+ try to insert breakpoints. */
+ cleanup = make_cleanup (restore_always_inserted_mode,
+ (void *) (uintptr_t) always_inserted_mode);
+ always_inserted_mode = 0;
+
ALL_BREAKPOINTS_SAFE (b, temp)
{
/* Solib breakpoints must be explicitly reset after an exec(). */
@@ -1494,6 +1555,7 @@ update_breakpoints_after_exec (void)
}
/* FIXME what about longjmp breakpoints? Re-create them here? */
create_overlay_event_breakpoint ("_ovly_debug_event");
+ do_cleanups (cleanup);
}
int
@@ -1533,9 +1595,9 @@ remove_breakpoint (struct bp_location *b, insertion_state_t is)
/* Permanent breakpoints cannot be inserted or removed. */
return 0;
- if (b->owner->type == bp_none)
- warning (_("attempted to remove apparently deleted breakpoint #%d?"),
- b->owner->number);
+ /* The type of none suggests that owner is actually deleted.
+ This should not ever happen. */
+ gdb_assert (b->owner->type != bp_none);
if (b->loc_type == bp_loc_software_breakpoint
|| b->loc_type == bp_loc_hardware_breakpoint)
@@ -2968,7 +3030,10 @@ bpstat_stop_status (CORE_ADDR bp_addr, ptid_t ptid)
{
/* We will stop here */
if (b->disposition == disp_disable)
- b->enable_state = bp_disabled;
+ {
+ b->enable_state = bp_disabled;
+ update_global_location_list ();
+ }
if (b->silent)
bs->print = 0;
bs->commands = b->commands;
@@ -4203,18 +4268,6 @@ allocate_bp_location (struct breakpoint *bpt, enum bptype bp_type)
internal_error (__FILE__, __LINE__, _("unknown breakpoint type"));
}
- /* Add this breakpoint to the end of the chain. */
-
- loc_p = bp_location_chain;
- if (loc_p == 0)
- bp_location_chain = loc;
- else
- {
- while (loc_p->global_next)
- loc_p = loc_p->global_next;
- loc_p->global_next = loc;
- }
-
return loc;
}
@@ -4222,6 +4275,10 @@ static void free_bp_location (struct bp_location *loc)
{
if (loc->cond)
xfree (loc->cond);
+
+ if (loc->function_name)
+ xfree (loc->function_name);
+
xfree (loc);
}
@@ -4326,7 +4383,6 @@ set_raw_breakpoint (struct symtab_and_line sal, enum bptype bptype)
set_breakpoint_location_function (b->loc);
- check_duplicates (b);
breakpoints_changed ();
return b;
@@ -4390,6 +4446,7 @@ create_longjmp_breakpoint (char *func_name)
b->silent = 1;
if (func_name)
b->addr_string = xstrdup (func_name);
+ update_global_location_list ();
}
/* Call this routine when stepping and nexting to enable a breakpoint
@@ -4405,7 +4462,7 @@ enable_longjmp_breakpoint (void)
if (b->type == bp_longjmp)
{
b->enable_state = bp_enabled;
- check_duplicates (b);
+ update_global_location_list ();
}
}
@@ -4419,7 +4476,7 @@ disable_longjmp_breakpoint (void)
|| b->type == bp_longjmp_resume)
{
b->enable_state = bp_disabled;
- check_duplicates (b);
+ update_global_location_list ();
}
}
@@ -4446,6 +4503,7 @@ create_overlay_event_breakpoint (char *func_name)
b->enable_state = bp_disabled;
overlay_events_enabled = 0;
}
+ update_global_location_list ();
}
void
@@ -4457,7 +4515,7 @@ enable_overlay_breakpoints (void)
if (b->type == bp_overlay_event)
{
b->enable_state = bp_enabled;
- check_duplicates (b);
+ update_global_location_list ();
overlay_events_enabled = 1;
}
}
@@ -4471,7 +4529,7 @@ disable_overlay_breakpoints (void)
if (b->type == bp_overlay_event)
{
b->enable_state = bp_disabled;
- check_duplicates (b);
+ update_global_location_list ();
overlay_events_enabled = 0;
}
}
@@ -4487,6 +4545,8 @@ create_thread_event_breakpoint (CORE_ADDR address)
/* addr_string has to be used or breakpoint_re_set will delete me. */
b->addr_string = xstrprintf ("*0x%s", paddr (b->loc->address));
+ update_global_location_list_nothrow ();
+
return b;
}
@@ -4531,6 +4591,7 @@ create_solib_event_breakpoint (CORE_ADDR address)
struct breakpoint *b;
b = create_internal_breakpoint (address, bp_shlib_event);
+ update_global_location_list_nothrow ();
return b;
}
@@ -4628,6 +4689,8 @@ create_fork_vfork_event_catchpoint (int tempflag, char *cond_string,
b->enable_state = bp_enabled;
b->disposition = tempflag ? disp_del : disp_donttouch;
b->forked_inferior_pid = 0;
+ update_global_location_list ();
+
mention (b);
}
@@ -4665,6 +4728,7 @@ create_exec_event_catchpoint (int tempflag, char *cond_string)
b->addr_string = NULL;
b->enable_state = bp_enabled;
b->disposition = tempflag ? disp_del : disp_donttouch;
+ update_global_location_list ();
mention (b);
}
@@ -4725,7 +4789,7 @@ set_longjmp_resume_breakpoint (CORE_ADDR pc, struct frame_id frame_id)
b->type);
b->enable_state = bp_enabled;
b->frame_id = frame_id;
- check_duplicates (b);
+ update_global_location_list ();
return;
}
}
@@ -4744,7 +4808,7 @@ disable_watchpoints_before_interactive_call_start (void)
&& breakpoint_enabled (b))
{
b->enable_state = bp_call_disabled;
- check_duplicates (b);
+ update_global_location_list ();
}
}
}
@@ -4763,7 +4827,7 @@ enable_watchpoints_after_interactive_call_stop (void)
&& (b->enable_state == bp_call_disabled))
{
b->enable_state = bp_enabled;
- check_duplicates (b);
+ update_global_location_list ();
}
}
}
@@ -4789,6 +4853,8 @@ set_momentary_breakpoint (struct symtab_and_line sal, struct frame_id frame_id,
if (in_thread_list (inferior_ptid))
b->thread = pid_to_thread_id (inferior_ptid);
+ update_global_location_list_nothrow ();
+
return b;
}
@@ -5192,6 +5258,8 @@ create_breakpoints (struct symtabs_and_lines sals, char **addr_string,
cond_string, type, disposition,
thread, ignore_count, from_tty);
}
+
+ update_global_location_list ();
}
/* Parse ARG which is assumed to be a SAL specification possibly
@@ -5509,6 +5577,8 @@ break_command_really (char *arg, char *cond_string, int thread,
b->ignore_count = ignore_count;
b->disposition = tempflag ? disp_del : disp_donttouch;
b->condition_not_parsed = 1;
+
+ update_global_location_list ();
mention (b);
}
@@ -5935,6 +6005,7 @@ watch_command_1 (char *arg, int accessflag, int from_tty)
value_free_to_mark (mark);
mention (b);
+ update_global_location_list ();
}
/* Return count of locations need to be watched and can be handled
@@ -6493,6 +6564,7 @@ handle_gnu_v3_exceptions (int tempflag, char *cond_string,
xfree (sals.sals);
mention (b);
+ update_global_location_list ();
return 1;
}
@@ -6565,6 +6637,7 @@ create_ada_exception_breakpoint (struct symtab_and_line sal,
b->ops = ops;
mention (b);
+ update_global_location_list ();
}
/* Implement the "catch exception" command. */
@@ -6886,33 +6959,124 @@ breakpoint_auto_delete (bpstat bs)
}
}
-/* Remove locations of breakpoint BPT from
- the global list of breakpoint locations. */
-
static void
-unlink_locations_from_global_list (struct breakpoint *bpt)
+update_global_location_list (void)
{
- /* This code assumes that the locations
- of a breakpoint are found in the global list
- in the same order, but not necessary adjacent. */
- struct bp_location **tmp = &bp_location_chain;
- struct bp_location *here = bpt->loc;
-
- if (here == NULL)
- return;
+ struct breakpoint *b;
+ struct bp_location **next = &bp_location_chain;
+ struct bp_location *loc;
+ struct bp_location *loc2;
+ struct gdb_exception e;
+ VEC(bp_location_p) *old_locations = NULL;
+ int ret;
+ int ix;
+
+ /* Store old locations for future reference. */
+ for (loc = bp_location_chain; loc; loc = loc->global_next)
+ VEC_safe_push (bp_location_p, old_locations, loc);
- for (; *tmp && here;)
+ bp_location_chain = NULL;
+ ALL_BREAKPOINTS (b)
{
- if (*tmp == here)
+ for (loc = b->loc; loc; loc = loc->next)
{
- *tmp = here->global_next;
- here = here->next;
+ *next = loc;
+ next = &(loc->global_next);
+ *next = NULL;
}
- else
+ }
+
+ /* Identify bp_location instances that are no longer present in the new
+ list, and therefore should be freed. Note that it's not necessary that
+ those locations should be removed from inferior -- if there's another
+ location at the same address (previously marked as duplicate),
+ we don't need to remove/insert the location. */
+ for (ix = 0; VEC_iterate(bp_location_p, old_locations, ix, loc); ++ix)
+ {
+ /* Tells if 'loc' is found amoung the new locations. If not, we
+ have to free it. */
+ int found_object = 0;
+ for (loc2 = bp_location_chain; loc2; loc2 = loc2->global_next)
+ if (loc2 == loc)
+ {
+ found_object = 1;
+ break;
+ }
+
+ /* If this location is no longer present, and inserted, look if there's
+ maybe a new location at the same address. If so, mark that one
+ inserted, and don't remove this one. This is needed so that we
+ don't have a time window where a breakpoint at certain location is not
+ inserted. */
+
+ if (loc->inserted)
{
- tmp = &((*tmp)->global_next);
+ /* If the location is inserted now, we might have to remove it. */
+ int keep = 0;
+
+ if (found_object && should_be_inserted (loc))
+ {
+ /* The location is still present in the location list, and still
+ should be inserted. Don't do anything. */
+ keep = 1;
+ }
+ else
+ {
+ /* The location is either no longer present, or got disabled.
+ See if there's another location at the same address, in which
+ case we don't need to remove this one from the target. */
+ if (breakpoint_address_is_meaningful (loc->owner))
+ for (loc2 = bp_location_chain; loc2; loc2 = loc2->global_next)
+ {
+ /* For the sake of should_insert_location. The
+ call to check_duplicates will fix up this later. */
+ loc2->duplicate = 0;
+ if (should_be_inserted (loc2)
+ && loc2 != loc && loc2->address == loc->address)
+ {
+ loc2->inserted = 1;
+ loc2->target_info = loc->target_info;
+ keep = 1;
+ break;
+ }
+ }
+ }
+
+ if (!keep)
+ if (remove_breakpoint (loc, mark_uninserted))
+ {
+ /* This is just about all we can do. We could keep this
+ location on the global list, and try to remove it next
+ time, but there's no particular reason why we will
+ succeed next time.
+
+ Note that at this point, loc->owner is still valid,
+ as delete_breakpoint frees the breakpoint only
+ after calling us. */
+ printf_filtered (_("warning: Error removing breakpoint %d\n"),
+ loc->owner->number);
+ }
}
+
+ if (!found_object)
+ free_bp_location (loc);
+ }
+
+ ALL_BREAKPOINTS (b)
+ {
+ check_duplicates (b);
}
+
+ if (always_inserted_mode && target_has_execution)
+ insert_breakpoint_locations ();
+}
+
+static void
+update_global_location_list_nothrow (void)
+{
+ struct gdb_exception e;
+ TRY_CATCH (e, RETURN_MASK_ERROR)
+ update_global_location_list ();
}
/* Delete a breakpoint and clean up all traces of it in the data
@@ -6923,7 +7087,7 @@ delete_breakpoint (struct breakpoint *bpt)
{
struct breakpoint *b;
bpstat bs;
- struct bp_location *loc;
+ struct bp_location *loc, *next;
gdb_assert (bpt != NULL);
@@ -6947,18 +7111,6 @@ delete_breakpoint (struct breakpoint *bpt)
deprecated_delete_breakpoint_hook (bpt);
breakpoint_delete_event (bpt->number);
- for (loc = bpt->loc; loc; loc = loc->next)
- {
- if (loc->inserted)
- remove_breakpoint (loc, mark_inserted);
-
- if (loc->cond)
- xfree (loc->cond);
-
- if (loc->function_name)
- xfree (loc->function_name);
- }
-
if (breakpoint_chain == bpt)
breakpoint_chain = bpt->next;
@@ -6969,85 +7121,6 @@ delete_breakpoint (struct breakpoint *bpt)
break;
}
- unlink_locations_from_global_list (bpt);
-
- check_duplicates (bpt);
-
- if (bpt->type != bp_hardware_watchpoint
- && bpt->type != bp_read_watchpoint
- && bpt->type != bp_access_watchpoint
- && bpt->type != bp_catch_fork
- && bpt->type != bp_catch_vfork
- && bpt->type != bp_catch_exec)
- for (loc = bpt->loc; loc; loc = loc->next)
- {
- /* If this breakpoint location was inserted, and there is
- another breakpoint at the same address, we need to
- insert the other breakpoint. */
- if (loc->inserted)
- {
- struct bp_location *loc2;
- ALL_BP_LOCATIONS (loc2)
- if (loc2->address == loc->address
- && loc2->section == loc->section
- && !loc->duplicate
- && loc2->owner->enable_state != bp_disabled
- && loc2->enabled
- && !loc2->shlib_disabled
- && loc2->owner->enable_state != bp_call_disabled)
- {
- int val;
-
- /* We should never reach this point if there is a permanent
- breakpoint at the same address as the one being deleted.
- If there is a permanent breakpoint somewhere, it should
- always be the only one inserted. */
- if (loc2->owner->enable_state == bp_permanent)
- internal_error (__FILE__, __LINE__,
- _("another breakpoint was inserted on top of "
- "a permanent breakpoint"));
-
- memset (&loc2->target_info, 0, sizeof (loc2->target_info));
- loc2->target_info.placed_address = loc2->address;
- if (b->type == bp_hardware_breakpoint)
- val = target_insert_hw_breakpoint (&loc2->target_info);
- else
- val = target_insert_breakpoint (&loc2->target_info);
-
- /* If there was an error in the insert, print a message, then stop execution. */
- if (val != 0)
- {
- struct ui_file *tmp_error_stream = mem_fileopen ();
- make_cleanup_ui_file_delete (tmp_error_stream);
-
-
- if (b->type == bp_hardware_breakpoint)
- {
- fprintf_unfiltered (tmp_error_stream,
- "Cannot insert hardware breakpoint %d.\n"
- "You may have requested too many hardware breakpoints.\n",
- b->number);
- }
- else
- {
- fprintf_unfiltered (tmp_error_stream, "Cannot insert breakpoint %d.\n", b->number);
- fprintf_filtered (tmp_error_stream, "Error accessing memory address ");
- fputs_filtered (paddress (loc2->address),
- tmp_error_stream);
- fprintf_filtered (tmp_error_stream, ": %s.\n",
- safe_strerror (val));
- }
-
- fprintf_unfiltered (tmp_error_stream,"The same program may be running in another process.");
- target_terminal_ours_for_output ();
- error_stream(tmp_error_stream);
- }
- else
- loc2->inserted = 1;
- }
- }
- }
-
free_command_lines (&bpt->commands);
if (bpt->cond_string != NULL)
xfree (bpt->cond_string);
@@ -7084,16 +7157,22 @@ delete_breakpoint (struct breakpoint *bpt)
bs->old_val = NULL;
/* bs->commands will be freed later. */
}
+
+ /* Now that breakpoint is removed from breakpoint
+ list, update the global location list. This
+ will remove locations that used to belong to
+ this breakpoint. Do this before freeing
+ the breakpoint itself, since remove_breakpoint
+ looks at location's owner. It might be better
+ design to have location completely self-contained,
+ but it's not the case now. */
+ update_global_location_list ();
+
+
/* On the chance that someone will soon try again to delete this same
bp, we mark it as deleted before freeing its storage. */
bpt->type = bp_none;
- for (loc = bpt->loc; loc;)
- {
- struct bp_location *loc_next = loc->next;
- xfree (loc);
- loc = loc_next;
- }
xfree (bpt);
}
@@ -7225,7 +7304,6 @@ update_breakpoint_locations (struct breakpoint *b,
if (all_locations_are_pending (existing_locations) && sals.nelts == 0)
return;
- unlink_locations_from_global_list (b);
b->loc = NULL;
for (i = 0; i < sals.nelts; ++i)
@@ -7304,12 +7382,7 @@ update_breakpoint_locations (struct breakpoint *b,
}
}
- while (existing_locations)
- {
- struct bp_location *next = existing_locations->next;
- free_bp_location (existing_locations);
- existing_locations = next;
- }
+ update_global_location_list ();
}
@@ -7405,10 +7478,6 @@ breakpoint_re_set_one (void *bint)
expanded = expand_line_sal_maybe (sals.sals[0]);
update_breakpoint_locations (b, expanded);
- /* Now that this is re-enabled, check_duplicates
- can be used. */
- check_duplicates (b);
-
xfree (sals.sals);
break;
@@ -7708,7 +7777,7 @@ disable_breakpoint (struct breakpoint *bpt)
bpt->enable_state = bp_disabled;
- check_duplicates (bpt);
+ update_global_location_list ();
if (deprecated_modify_breakpoint_hook)
deprecated_modify_breakpoint_hook (bpt);
@@ -7747,7 +7816,7 @@ disable_command (char *args, int from_tty)
struct bp_location *loc = find_location_by_number (args);
if (loc)
loc->enabled = 0;
- check_duplicates (loc->owner);
+ update_global_location_list ();
}
else
map_breakpoint_numbers (args, disable_breakpoint);
@@ -7832,7 +7901,7 @@ have been allocated for other watchpoints.\n"), bpt->number);
if (bpt->enable_state != bp_permanent)
bpt->enable_state = bp_enabled;
bpt->disposition = disposition;
- check_duplicates (bpt);
+ update_global_location_list ();
breakpoints_changed ();
if (deprecated_modify_breakpoint_hook)
@@ -7883,7 +7952,7 @@ enable_command (char *args, int from_tty)
struct bp_location *loc = find_location_by_number (args);
if (loc)
loc->enabled = 1;
- check_duplicates (loc->owner);
+ update_global_location_list ();
}
else
map_breakpoint_numbers (args, enable_breakpoint);
@@ -8051,6 +8120,11 @@ single_step_breakpoint_inserted_here_p (CORE_ADDR pc)
return 0;
}
+int breakpoints_always_inserted_mode (void)
+{
+ return always_inserted_mode;
+}
+
/* This help string is used for the break, hbreak, tbreak and thbreak commands.
It is defined as a macro to prevent duplication.
@@ -8452,6 +8526,19 @@ a warning will be emitted for such breakpoints."),
show_automatic_hardware_breakpoints,
&breakpoint_set_cmdlist,
&breakpoint_show_cmdlist);
+
+ add_setshow_boolean_cmd ("always-inserted", class_support,
+ &always_inserted_mode, _("\
+Set mode for inserting breakpoints."), _("\
+Show mode for inserting breakpoints."), _("\
+When this mode is off (which is the default), breakpoints are inserted in\n\
+inferior when it is resumed, and removed when execution stops. When this\n\
+mode is on, breakpoints are inserted immediately and removed only when\n\
+the user deletes the breakpoint."),
+ NULL,
+ &show_always_inserted_mode,
+ &breakpoint_set_cmdlist,
+ &breakpoint_show_cmdlist);
automatic_hardware_breakpoints = 1;
}
diff --git a/gdb/breakpoint.h b/gdb/breakpoint.h
index 5376455..ed76f30 100644
--- a/gdb/breakpoint.h
+++ b/gdb/breakpoint.h
@@ -331,6 +331,9 @@ enum watchpoint_triggered
watch_triggered_yes
};
+typedef struct bp_location *bp_location_p;
+DEF_VEC_P(bp_location_p);
+
/* Note that the ->silent field is not currently used by any commands
(though the code is in there if it was to be, and set_raw_breakpoint
does set it to 0). I implemented it because I thought it would be
@@ -864,4 +867,6 @@ int watchpoints_triggered (struct target_waitstatus *);
void breakpoint_restore_shadows (gdb_byte *buf, ULONGEST memaddr,
LONGEST len);
+extern int breakpoints_always_inserted_mode (void);
+
#endif /* !defined (BREAKPOINT_H) */
diff --git a/gdb/doc/gdb.texinfo b/gdb/doc/gdb.texinfo
index 6337790..e422d44 100644
--- a/gdb/doc/gdb.texinfo
+++ b/gdb/doc/gdb.texinfo
@@ -3209,6 +3209,30 @@ type. If the target provides a memory map, @value{GDBN} will warn when
trying to set software breakpoint at a read-only address.
@end table
+@value{GDBN} normally implements breakpoints by replacing the program code
+at the breakpoint address with a special instruction, which, when
+executed, given control to the debugger. By default, the program
+code is so modified only when the program is resumed. As soon as
+the program stops, @value{GDBN} restores the original instructions. This
+behaviour guards against leaving breakpoints inserted in the
+target should gdb abrubptly disconnect. However, with slow remote
+targets, inserting and removing breakpoint can reduce the performance.
+This behavior can be controlled with the following commands::
+
+@kindex set breakpoint always-inserted
+@kindex show breakpoint always-inserted
+@table @code
+@item set breakpoint always-inserted off
+This is the default behaviour. All breakpoints, including newly added
+by the user, are inserted in the target only when the target is
+resumed. All breakpoints are removed from the target when it stops.
+
+@item set breakpoint always-inserted on
+Causes all breakpoints to be inserted in the target at all times. If
+the user adds a new breakpoint, or changes an existing breakpoint, the
+breakpoints in the target are updated immediately. A breakpoint is
+removed from the target only when breakpoint itself is removed.
+@end table
@cindex negative breakpoint numbers
@cindex internal @value{GDBN} breakpoints
diff --git a/gdb/infrun.c b/gdb/infrun.c
index df042a1..da8c3e0 100644
--- a/gdb/infrun.c
+++ b/gdb/infrun.c
@@ -614,19 +614,18 @@ a command like `return' or `jump' to continue execution."));
}
if ((step || singlestep_breakpoints_inserted_p)
- && breakpoint_here_p (read_pc ())
- && !breakpoint_inserted_here_p (read_pc ()))
+ && stepping_over_breakpoint)
{
- /* We're stepping, have breakpoint at PC, and it's
- not inserted. Most likely, proceed has noticed that
- we have breakpoint and tries to single-step over it,
- so that it's not hit. In which case, we need to
- single-step only this thread, and keep others stopped,
- as they can miss this breakpoint if allowed to run.
-
- The current code either has all breakpoints inserted,
- or all removed, so if we let other threads run,
- we can actually miss any breakpoint, not the one at PC. */
+ /* We're allowing a thread to run past a breakpoint it has
+ hit, by single-stepping the thread with the breakpoint
+ removed. In which case, we need to single-step only this
+ thread, and keep others stopped, as they can miss this
+ breakpoint if allowed to run.
+
+ The current code actually removes all breakpoints when
+ doing this, not just the one being stepped over, so if we
+ let other threads run, we can actually miss any
+ breakpoint, not just the one at PC. */
resume_ptid = inferior_ptid;
}
@@ -787,9 +786,17 @@ proceed (CORE_ADDR addr, enum target_signal siggnal, int step)
oneproc = 1;
if (oneproc)
- /* We will get a trace trap after one instruction.
- Continue it automatically and insert breakpoints then. */
- stepping_over_breakpoint = 1;
+ {
+ /* We will get a trace trap after one instruction.
+ Continue it automatically and insert breakpoints then. */
+ stepping_over_breakpoint = 1;
+ /* FIXME: if breakpoints are always inserted, we'll trap
+ if trying to single-step over breakpoint. Disable
+ all breakpoints. In future, we'd need to invent some
+ smart way of stepping over breakpoint instruction without
+ hitting breakpoint. */
+ remove_breakpoints ();
+ }
else
insert_breakpoints ();
@@ -1348,10 +1355,6 @@ handle_inferior_event (struct execution_control_state *ecs)
established. */
if (stop_soon == NO_STOP_QUIETLY)
{
- /* Remove breakpoints, SOLIB_ADD might adjust
- breakpoint addresses via breakpoint_re_set. */
- remove_breakpoints ();
-
/* Check for any newly added shared libraries if we're
supposed to be adding them automatically. Switch
terminal for any messages produced by
@@ -1391,9 +1394,6 @@ handle_inferior_event (struct execution_control_state *ecs)
/* NOTE drow/2007-05-11: This might be a good place to check
for "catch load". */
-
- /* Reinsert breakpoints and continue. */
- insert_breakpoints ();
}
/* If we are skipping through a shell, or through shared library
@@ -1402,6 +1402,10 @@ handle_inferior_event (struct execution_control_state *ecs)
we're attaching or setting up a remote connection. */
if (stop_soon == STOP_QUIETLY || stop_soon == NO_STOP_QUIETLY)
{
+ /* Loading of shared libraries might have changed breakpoint
+ addresses. Make sure new breakpoints are inserted. */
+ if (!breakpoints_always_inserted_mode ())
+ insert_breakpoints ();
resume (0, TARGET_SIGNAL_0);
prepare_to_wait (ecs);
return;
@@ -2039,8 +2043,7 @@ process_event_stop_test:
stop_signal = TARGET_SIGNAL_0;
if (prev_pc == read_pc ()
- && breakpoint_here_p (read_pc ())
- && !breakpoint_inserted_here_p (read_pc ())
+ && stepping_over_breakpoint
&& step_resume_breakpoint == NULL)
{
/* We were just starting a new sequence, attempting to
@@ -2216,10 +2219,6 @@ process_event_stop_test:
{
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_CHECK_SHLIBS\n");
- /* Remove breakpoints, we eventually want to step over the
- shlib event breakpoint, and SOLIB_ADD might adjust
- breakpoint addresses via breakpoint_re_set. */
- remove_breakpoints ();
/* Check for any newly added shared libraries if we're
supposed to be adding them automatically. Switch
@@ -3120,7 +3119,7 @@ normal_stop (void)
gdbarch_decr_pc_after_break needs to just go away. */
deprecated_update_frame_pc_hack (get_current_frame (), read_pc ());
- if (target_has_execution)
+ if (!breakpoints_always_inserted_mode () && target_has_execution)
{
if (remove_breakpoints ())
{
diff --git a/gdb/linux-fork.c b/gdb/linux-fork.c
index 8c29827..a9f5fae 100644
--- a/gdb/linux-fork.c
+++ b/gdb/linux-fork.c
@@ -536,6 +536,10 @@ checkpoint_command (char *args, int from_tty)
/* Make this temp var static, 'cause it's used in the error context. */
static int temp_detach_fork;
+ /* Remove breakpoints, so that they are not inserted
+ in the forked process. */
+ remove_breakpoints ();
+
/* Make the inferior fork, record its (and gdb's) state. */
if (lookup_minimal_symbol ("fork", NULL, NULL) != NULL)
@@ -576,6 +580,7 @@ checkpoint_command (char *args, int from_tty)
if (!fp)
error (_("Failed to find new fork"));
fork_save_infrun_state (fp, 1);
+ insert_breakpoints ();
}
static void
@@ -593,7 +598,9 @@ linux_fork_context (struct fork_info *newfp, int from_tty)
oldfp = add_fork (ptid_get_pid (inferior_ptid));
fork_save_infrun_state (oldfp, 1);
+ remove_breakpoints ();
fork_load_infrun_state (newfp);
+ insert_breakpoints ();
printf_filtered (_("Switching to %s\n"),
target_pid_to_str (inferior_ptid));
diff --git a/gdb/target.c b/gdb/target.c
index 7f53944..944d601 100644
--- a/gdb/target.c
+++ b/gdb/target.c
@@ -1676,6 +1676,10 @@ target_preopen (int from_tty)
void
target_detach (char *args, int from_tty)
{
+ /* If we're in breakpoints-always-inserted mode, have to
+ remove them before detaching. */
+ remove_breakpoints ();
+
(current_target.to_detach) (args, from_tty);
}
@@ -1684,6 +1688,10 @@ target_disconnect (char *args, int from_tty)
{
struct target_ops *t;
+ /* If we're in breakpoints-always-inserted mode, have to
+ remove them before disconnecting. */
+ remove_breakpoints ();
+
for (t = current_target.beneath; t != NULL; t = t->beneath)
if (t->to_disconnect != NULL)
{
diff --git a/gdb/testsuite/ChangeLog b/gdb/testsuite/ChangeLog
index 37855d5..eb50238 100644
--- a/gdb/testsuite/ChangeLog
+++ b/gdb/testsuite/ChangeLog
@@ -1,5 +1,12 @@
2008-04-24 Vladimir Prus <vladimir@codesourcery.com>
+ * lib/gdb.exp (gdb_continue_to_breakpoint): Allow the caller
+ to specify regexp for the location to stop at.
+ * gdb.base/break-always.c: New.
+ * gdb.base/break-always.exp: New.
+
+2008-04-24 Vladimir Prus <vladimir@codesourcery.com>
+
* lib/mi-support.exp (mi_runto_helper): Adjust
for the original-location field.
(mi_create_breakpoint, mi_list_breakpoints): New.
diff --git a/gdb/testsuite/gdb.base/break-always.c b/gdb/testsuite/gdb.base/break-always.c
new file mode 100644
index 0000000..6c5515d
--- /dev/null
+++ b/gdb/testsuite/gdb.base/break-always.c
@@ -0,0 +1,32 @@
+/* This testcase is part of GDB, the GNU debugger.
+
+ Copyright 2008 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+int bar ()
+{
+ return 1; /* break in bar */
+}
+
+int foo ()
+{
+ return bar ();
+}
+
+int main ()
+{
+ foo ();
+ return 0;
+}
diff --git a/gdb/testsuite/gdb.base/break-always.exp b/gdb/testsuite/gdb.base/break-always.exp
new file mode 100644
index 0000000..6161943
--- /dev/null
+++ b/gdb/testsuite/gdb.base/break-always.exp
@@ -0,0 +1,32 @@
+# Copyright 2008 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# Test that 'set breakpoint always-inserted 1' is not a brick
+
+if { [prepare_for_testing break-always.exp break-always break-always.c] } {
+ return -1
+}
+
+set bar_location [gdb_get_line_number "break in bar" break-always.c]
+
+gdb_test "set breakpoint always-inserted 1" ""
+
+runto foo
+
+gdb_test "break bar" "Breakpoint 2.*" "set breakpoint on bar"
+gdb_continue_to_breakpoint "bar" ".*/break-always.c:$bar_location.*"
+
+
+
diff --git a/gdb/testsuite/lib/gdb.exp b/gdb/testsuite/lib/gdb.exp
index 8ad8792..bb9bd24 100644
--- a/gdb/testsuite/lib/gdb.exp
+++ b/gdb/testsuite/lib/gdb.exp
@@ -432,13 +432,13 @@ proc runto_main { } {
### worked. Use NAME as part of the test name; each call to
### continue_to_breakpoint should use a NAME which is unique within
### that test file.
-proc gdb_continue_to_breakpoint {name} {
+proc gdb_continue_to_breakpoint {name {location_pattern .*}} {
global gdb_prompt
set full_name "continue to breakpoint: $name"
send_gdb "continue\n"
gdb_expect {
- -re "Breakpoint .* at .*\r\n$gdb_prompt $" {
+ -re "Breakpoint .* at $location_pattern\r\n$gdb_prompt $" {
pass $full_name
}
-re ".*$gdb_prompt $" {