gdb/testsuite/

	* lib/dwarf.exp (_location): Handle DW_OP_deref_size.
	* gdb.trace/entry-values.c: New.
	* gdb.trace/entry-values.exp: New.

1 files changed, 232 insertions, 0 deletions

diff --git a/gdb/testsuite/gdb.trace/entry-values.exp b/gdb/testsuite/gdb.trace/entry-values.exp
new file mode 100644
index 0000000..0fb060a
--- /dev/null
+++ b/gdb/testsuite/gdb.trace/entry-values.exp
@@ -0,0 +1,232 @@
+# Copyright 2013 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+load_lib dwarf.exp
+
+# This test can only be run on targets which support DWARF-2 and use gas.
+if {![dwarf2_support]} {
+    return 0
+}
+
+standard_testfile .c entry-values-dw.S
+
+if  {[gdb_compile ${srcdir}/${subdir}/${srcfile} ${binfile}1.o \
+	  object {nodebug}] != ""} {
+    return -1
+}
+
+# Start GDB and load object file, compute the function length and
+# the offset of branch instruction in function.  They are needed
+# in the Dwarf Assembler below.
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}1.o
+
+set foo_length ""
+
+# Calculate the offset of the last instruction from the beginning.
+set test "disassemble foo"
+gdb_test_multiple $test $test {
+    -re ".*$hex <\\+($decimal)>:\[^\r\n\]+\r\nEnd of assembler dump\.\r\n$gdb_prompt $" {
+	set foo_length $expect_out(1,string)
+	pass $test
+    }
+    -re ".*$gdb_prompt $" {
+	fail $test
+	# Bail out here, because we can't do the following tests if
+	# $foo_length is unknown.
+	return -1
+    }
+}
+
+# Calculate the size of the last instruction.  Single instruction
+# shouldn't be longer than 10 bytes.
+
+set test "disassemble foo+$foo_length,+10"
+gdb_test_multiple $test $test {
+    -re ".*($hex) <foo\\+$foo_length>:\[^\r\n\]+\r\n\[ \]+($hex) .*\.\r\n$gdb_prompt $" {
+	set start $expect_out(1,string)
+	set end $expect_out(2,string)
+
+	set foo_length [expr $foo_length + $end - $start]
+	pass $test
+    }
+    -re ".*$gdb_prompt $" {
+	fail $test
+	# Bail out here, because we can't do the following tests if
+	# $foo_length is unknown.
+	return -1
+    }
+}
+
+set bar_length ""
+set bar_call_foo ""
+
+# Calculate the offset of the last instruction from the beginning.
+set test "disassemble bar"
+gdb_test_multiple $test $test {
+    -re ".*$hex <\\+$decimal>:\[ \t\]+call\[^\r\n\]+\r\n\[ \]+$hex <\\+($decimal)>:" {
+	set bar_call_foo $expect_out(1,string)
+	exp_continue
+    }
+    -re ".*$hex <\\+($decimal)>:\[^\r\n\]+\r\nEnd of assembler dump\.\r\n$gdb_prompt $" {
+	set bar_length $expect_out(1,string)
+	pass $test
+    }
+    -re ".*$gdb_prompt $" {
+	fail $test
+    }
+}
+
+if { [string equal $bar_call_foo ""] || [string equal $bar_length ""] } {
+    fail "Find the call or branch instruction offset in bar"
+    # The following test makes no sense if the offset is unknown.  We need
+    # to update the pattern above to match call or branch instruction for
+    # the target architecture.
+    return -1
+}
+
+# Calculate the size of the last instruction.
+
+set test "disassemble bar+$bar_length,+10"
+gdb_test_multiple $test $test {
+    -re ".*($hex) <bar\\+$bar_length>:\[^\r\n\]+\r\n\[ \]+($hex) .*\.\r\n$gdb_prompt $" {
+	set start $expect_out(1,string)
+	set end $expect_out(2,string)
+
+	set bar_length [expr $bar_length + $end - $start]
+	pass $test
+    }
+    -re ".*$gdb_prompt $" {
+	fail $test
+	# Bail out here, because we can't do the following tests if
+	# $bar_length is unknown.
+	return -1
+    }
+}
+
+gdb_exit
+
+# Make some DWARF for the test.
+set asm_file [standard_output_file $srcfile2]
+Dwarf::assemble $asm_file {
+    declare_labels int_label foo_label
+    global foo_length bar_length bar_call_foo
+
+    cu {} {
+	compile_unit {{language @DW_LANG_C}} {
+	    int_label: base_type {
+		{name int}
+		{encoding @DW_ATE_signed}
+		{byte_size 4 DW_FORM_sdata}
+	    }
+
+	    foo_label: subprogram {
+		{name foo}
+		{decl_file 1}
+		{low_pc foo addr}
+		{high_pc "foo + $foo_length" addr}
+	    } {
+		formal_parameter {
+		    {type :$int_label}
+		    {name i}
+		    {location {DW_OP_reg0} SPECIAL_expr}
+		}
+		formal_parameter {
+		    {type :$int_label}
+		    {name j}
+		    {location {DW_OP_reg1} SPECIAL_expr}
+		}
+	    }
+
+	    subprogram {
+		{name bar}
+		{decl_file 1}
+		{low_pc bar addr}
+		{high_pc "bar + $bar_length" addr}
+		{GNU_all_call_sites 1}
+	    } {
+		formal_parameter {
+		    {type :$int_label}
+		    {name i}
+		}
+
+		GNU_call_site {
+		    {low_pc "bar + $bar_call_foo" addr}
+		    {abstract_origin :$foo_label}
+		} {
+		    # Faked entry values are reference to variables 'global1'
+		    # and 'global2' and faked locations are register 0 and
+		    # register 1.
+		    GNU_call_site_parameter {
+			{location {DW_OP_reg0} SPECIAL_expr}
+			{GNU_call_site_value {
+			    addr global1
+			    deref_size 4
+			} SPECIAL_expr}
+		    }
+		    GNU_call_site_parameter {
+			{location {DW_OP_reg1} SPECIAL_expr}
+			{GNU_call_site_value {
+			    addr global2
+			    deref_size 4
+			} SPECIAL_expr}
+		    }
+		}
+	    }
+	}
+    }
+}
+
+if  {[gdb_compile $asm_file ${binfile}2.o object {nodebug}] != ""} {
+    return -1
+}
+
+if  {[gdb_compile [list ${binfile}1.o ${binfile}2.o] \
+	  "${binfile}" executable {}] != ""} {
+    return -1
+}
+
+clean_restart ${testfile}
+
+if ![runto_main] {
+    fail "Can't run to main"
+    return -1
+}
+
+gdb_breakpoint "foo"
+
+gdb_continue_to_breakpoint "foo"
+
+gdb_test_no_output "set print entry-values both"
+
+gdb_test_sequence "bt" "bt (1)" {
+    "\[\r\n\]#0 .* foo \\(i=[-]?[0-9]+, i@entry=2, j=[-]?[0-9]+, j@entry=3\\)"
+    "\[\r\n\]#1 .* bar \\(i=<optimized out>, i@entry=<optimized out>\\)"
+    "\[\r\n\]#2 .* main \\(\\)"
+}
+
+# Update global variables 'global1' and 'global2' and test that the
+# entry values are updated too.
+
+gdb_test_no_output "set var global1=10"
+gdb_test_no_output "set var global2=11"
+
+gdb_test_sequence "bt" "bt (2)" {
+    "\[\r\n\]#0 .* foo \\(i=[-]?[0-9]+, i@entry=10, j=[-]?[0-9]+, j@entry=11\\)"
+    "\[\r\n\]#1 .* bar \\(i=<optimized out>, i@entry=<optimized out>\\)"
+    "\[\r\n\]#2 .* main \\(\\)"
+}