Initial creation of sourceware repository

1 files changed, 0 insertions, 247 deletions

diff --git a/gdb/monitor.h b/gdb/monitor.h
deleted file mode 100644
index 4ccddd5..0000000
--- a/gdb/monitor.h
+++ /dev/null
@@ -1,247 +0,0 @@
-/* Definitions for remote debugging interface for ROM monitors.
-    Copyright 1990, 1991, 1992, 1996 Free Software Foundation, Inc.
-    Contributed by Cygnus Support. Written by Rob Savoye for Cygnus.
-  
-   This file is part of GDB.
-   
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2 of the License, or
-   (at your option) any later version.
-  
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-  
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-*/
-
-#include "serial.h"
-
-/* This structure describes the strings necessary to give small command
-   sequences to the monitor, and parse the response.
-
-   CMD is the actual command typed at the monitor.  Usually this has
-   embedded sequences ala printf, which are substituted with the
-   arguments appropriate to that type of command.  Ie: to examine a
-   register, we substitute the register name for the first arg.  To
-   modify memory, we substitute the memory location and the new
-   contents for the first and second args, etc...
-
-   RESP_DELIM used to home in on the response string, and is used to
-   disambiguate the answer within the pile of text returned by the
-   monitor.  This should be a unique string that immediately precedes
-   the answer.  Ie: if your monitor prints out `PC: 00000001= ' in
-   response to asking for the PC, you should use `: ' as the
-   RESP_DELIM.  RESP_DELIM may be NULL if the res- ponse is going to
-   be ignored, or has no particular leading text.
-
-   TERM is the string that the monitor outputs to indicate that it is
-   idle, and waiting for input.  This is usually a prompt of some
-   sort.  In the previous example, it would be `= '.  It is important
-   that TERM really means that the monitor is idle, otherwise GDB may
-   try to type at it when it isn't ready for input.  This is a problem
-   because many monitors cannot deal with type-ahead.  TERM may be
-   NULL if the normal prompt is output.
-
-   TERM_CMD is used to quit out of the subcommand mode and get back to
-   the main prompt.  TERM_CMD may be NULL if it isn't necessary.  It
-   will also be ignored if TERM is NULL.  */
-
-struct memrw_cmd
-{
-  char *cmdb;			/* Command to send for byte read/write */
-  char *cmdw;			/* Command for word (16 bit) read/write */
-  char *cmdl;			/* Command for long (32 bit) read/write */
-  char *cmdll;			/* Command for long long (64 bit) read/write */
-  char *resp_delim;		/* String just prior to the desired value */
-  char *term;			/* Terminating string to search for */
-  char *term_cmd;		/* String to get out of sub-mode (if necessary) */
-};
-
-struct regrw_cmd
-{
-  char *cmd;			/* Command to send for reg read/write */
-  char *resp_delim;		/* String (actually a regexp if getmem) just
-				   prior to the desired value */
-  char *term;			/* Terminating string to search for */
-  char *term_cmd;		/* String to get out of sub-mode (if necessary) */
-};
-
-struct monitor_ops
-{
-  int flags;			/* See below */
-  char **init;			/* List of init commands.  NULL terminated. */
-  char *cont;			/* continue command */
-  char *step;			/* single step */
-  char *stop;			/* Interrupt program string */
-  char *set_break;		/* set a breakpoint */
-  char *clr_break;		/* clear a breakpoint */
-  char *clr_all_break;		/* Clear all breakpoints */
-  char *fill;			/* Memory fill cmd (addr len val) */
-  struct memrw_cmd setmem;	/* set memory to a value */
-  struct memrw_cmd getmem;	/* display memory */
-  struct regrw_cmd setreg;	/* set a register */
-  struct regrw_cmd getreg;	/* get a register */
-				/* Some commands can dump a bunch of registers
-				   at once.  This comes as a set of REG=VAL
-				   pairs.  This should be called for each pair
-				   of registers that we can parse to supply
-				   GDB with the value of a register.  */
-  char *dump_registers;		/* Command to dump all regs at once */
-  char *register_pattern;	/* Pattern that picks out register from reg dump */
-  void (*supply_register) PARAMS ((char *name, int namelen,
-				   char *val, int vallen));
-  void (*load_routine) PARAMS ((serial_t desc, char *file,
-				int hashmark)); /* Download routine */
-  int (*dumpregs) PARAMS((void)) ;    /* routine to dump all registers */
-  int (*continue_hook) PARAMS((void)) ; /* Emit the continue command */
-  int (*wait_filter) PARAMS((char * buf, /* Maybe contains registers */
-			    int bufmax ,
-			    int * response_length,
-			    struct target_waitstatus * status)) ;
-  char *load;			/* load command */
-  char *loadresp;		/* Response to load command */
-  char *prompt;			/* monitor command prompt */
-  char *line_term;		/* end-of-command delimitor */
-  char *cmd_end;		/* optional command terminator */
-  struct target_ops *target;	/* target operations */
-  int stopbits;			/* number of stop bits */
-  char **regnames;		/* array of register names in ascii */
-  int magic;			/* Check value */
-};
-
-/* The monitor ops magic number, used to detect if an ops structure doesn't
-   have the right number of entries filled in. */
-
-#define MONITOR_OPS_MAGIC 600925
-
-/* Flag definitions. */
-
-/* If set, then clear breakpoint command uses address, otherwise it
-   uses an index returned by the monitor.  */
-
-#define MO_CLR_BREAK_USES_ADDR 0x1
-
-/* If set, then memory fill command uses STARTADDR, ENDADDR+1, VALUE
-   as args, else it uses STARTADDR, LENGTH, VALUE as args. */
-
-#define MO_FILL_USES_ADDR 0x2
-
-/* If set, then monitor doesn't automatically supply register dump
-   when coming back after a continue.  */
-
-#define MO_NEED_REGDUMP_AFTER_CONT 0x4
-
-/* getmem needs start addr and end addr */
-
-#define MO_GETMEM_NEEDS_RANGE 0x8
-
-/* getmem can only read one loc at a time */
-
-#define MO_GETMEM_READ_SINGLE 0x10
-
-/* handle \r\n combinations */
-
-#define MO_HANDLE_NL 0x20
-
-/* don't expect echos in monitor_open */
-
-#define MO_NO_ECHO_ON_OPEN 0x40
-
-/* If set, send break to stop monitor */
-
-#define MO_SEND_BREAK_ON_STOP 0x80
-
-/* If set, target sends an ACK after each S-record */
-
-#define MO_SREC_ACK 0x100
-
-/* Allow 0x prefix on addresses retured from monitor */
-
-#define MO_HEX_PREFIX 0x200
-
-/* Some monitors require a different command when starting a program */
-
-#define MO_RUN_FIRST_TIME 0x400
-
-/* Don't expect echos when getting memory */
-
-#define MO_NO_ECHO_ON_SETMEM 0x800
-
-/* If set, then register store command expects value BEFORE regname */
-
-#define MO_REGISTER_VALUE_FIRST 0x1000
-
-/* If set, then the monitor displays registers as pairs.  */
-
-#define MO_32_REGS_PAIRED 0x2000
-
-/* If set, then register setting happens interactively.  */
-
-#define MO_SETREG_INTERACTIVE 0x4000
-
-/* If set, then memory setting happens interactively.  */
-
-#define MO_SETMEM_INTERACTIVE 0x8000
-
-/* If set, then memory dumps are always on 16-byte boundaries, even
-   when less is desired.  */
-
-#define MO_GETMEM_16_BOUNDARY 0x10000
-
-/* If set, then the monitor numbers its breakpoints starting from 1.  */
-
-#define MO_CLR_BREAK_1_BASED 0x20000
-
-/* If set, then the monitor acks srecords with a plus sign.  */
-
-#define MO_SREC_ACK_PLUS 0x40000
-
-/* If set, then the monitor "acks" srecords with rotating lines.  */
-
-#define MO_SREC_ACK_ROTATE 0x80000
-
-/* If set, then remove useless address bits from memory addresses.  */
-
-#define MO_ADDR_BITS_REMOVE 0x100000
-
-/* If set, then display target program output if prefixed by ^O.  */
-
-#define MO_PRINT_PROGRAM_OUTPUT 0x200000
-
-/* Some dump bytes commands align the first data with the preceeding
-16 byte boundary. Some print blanks and start at the exactly the
-requested boundary. */
-
-#define MO_EXACT_DUMPADDR 0x400000
-
-/* Rather entering and exiting the write memory dialog for each word byte,
-   we can save time by transferring the whole block without exiting
-   the memory editing mode. You only need to worry about this
-   if you are doing memory downloading.
-   This engages a new write function registered with dcache.
-   */
-#define MO_HAS_BLOCKWRITES 0x800000
-
-#define SREC_SIZE 160
-
-extern void monitor_open PARAMS ((char *args, struct monitor_ops *ops,
-				  int from_tty));
-extern void monitor_close PARAMS ((int quitting));
-extern char *monitor_supply_register PARAMS ((int regno, char *valstr));
-extern int monitor_expect PARAMS ((char *prompt, char *buf, int buflen));
-extern int monitor_expect_prompt PARAMS ((char *buf, int buflen));
-extern void monitor_printf PARAMS ((char *, ...))
-     ATTR_FORMAT(printf, 1, 2);
-extern void monitor_printf_noecho PARAMS ((char *, ...))
-     ATTR_FORMAT(printf, 1, 2);
-extern void monitor_write PARAMS ((char *buf, int buflen));
-extern int monitor_readchar PARAMS ((void));
-extern char *monitor_get_dev_name PARAMS ((void));
-extern void init_monitor_ops PARAMS ((struct target_ops *));
-extern int monitor_dump_reg_block PARAMS((char * dump_cmd)) ;
-extern void flush_monitor_dcache PARAMS ((void));