[gdb/symtab] Fix zero address complaint for shlib

In PR28004 the following warning / Internal error is reported:
...
$ gdb -q -batch \
    -iex "set sysroot $(pwd -P)/repro" \
    ./repro/gdb \
    ./repro/core \
    -ex bt
  ...
 Program terminated with signal SIGABRT, Aborted.
 #0  0x00007ff8fe8e5d22 in raise () from repro/usr/lib/libc.so.6
 [Current thread is 1 (LWP 1762498)]
 #1  0x00007ff8fe8cf862 in abort () from repro/usr/lib/libc.so.6
 warning: (Internal error: pc 0x7ff8feb2c21d in read in psymtab, \
           but not in symtab.)
 warning: (Internal error: pc 0x7ff8feb2c218 in read in psymtab, \
           but not in symtab.)
  ...
 #2  0x00007ff8feb2c21e in __gnu_debug::_Error_formatter::_M_error() const \
   [clone .cold] (warning: (Internal error: pc 0x7ff8feb2c21d in read in \
   psymtab, but not in symtab.)

) from repro/usr/lib/libstdc++.so.6
...

The warning is about the following:
- in find_pc_sect_compunit_symtab we try to find the address
  (0x7ff8feb2c218 / 0x7ff8feb2c21d) in the symtabs.
- that fails, so we try again in the partial symtabs.
- we find a matching partial symtab
- however, the partial symtab has a full symtab, so
  we should have found a matching symtab in the first step.

The addresses are:
...
(gdb) info sym 0x7ff8feb2c218
__gnu_debug::_Error_formatter::_M_error() const [clone .cold] in \
  section .text of repro/usr/lib/libstdc++.so.6
(gdb) info sym 0x7ff8feb2c21d
__gnu_debug::_Error_formatter::_M_error() const [clone .cold] + 5 in \
  section .text of repro/usr/lib/libstdc++.so.6
...
which correspond to unrelocated addresses 0x9c218 and 0x9c21d:
...
$ nm -C  repro/usr/lib/libstdc++.so.6.0.29 | grep 000000000009c218
000000000009c218 t __gnu_debug::_Error_formatter::_M_error() const \
  [clone .cold]
...
which belong to function __gnu_debug::_Error_formatter::_M_error() in
/build/gcc/src/gcc/libstdc++-v3/src/c++11/debug.cc.

The partial symtab that is found for the addresses is instead the one for
/build/gcc/src/gcc/libstdc++-v3/src/c++98/bitmap_allocator.cc, which is
incorrect.

This happens as follows.

The bitmap_allocator.cc CU has DW_AT_ranges at .debug_rnglist offset 0x4b50:
...
    00004b50 0000000000000000 0000000000000056
    00004b5a 00000000000a4790 00000000000a479c
    00004b64 00000000000a47a0 00000000000a47ac
...

When reading the first range 0x0..0x56, it doesn't trigger the "start address
of zero" complaint here:
...
      /* A not-uncommon case of bad debug info.
         Don't pollute the addrmap with bad data.  */
      if (range_beginning + baseaddr == 0
          && !per_objfile->per_bfd->has_section_at_zero)
        {
          complaint (_(".debug_rnglists entry has start address of zero"
                       " [in module %s]"), objfile_name (objfile));
          continue;
        }
...
because baseaddr != 0, which seems incorrect given that when loading the
shared library individually in gdb (and consequently baseaddr == 0), we do see
the complaint.

Consequently, we run into this case in dwarf2_get_pc_bounds:
...
  if (low == 0 && !per_objfile->per_bfd->has_section_at_zero)
    return PC_BOUNDS_INVALID;
...
which then results in this code in process_psymtab_comp_unit_reader being
called with cu_bounds_kind == PC_BOUNDS_INVALID, which sets the set_addrmap
argument to 1:
...
      scan_partial_symbols (first_die, &lowpc, &highpc,
                            cu_bounds_kind <= PC_BOUNDS_INVALID, cu);
...
and consequently, the CU addrmap gets build using address info from the
functions.

During that process, addrmap_set_empty is called with a range that includes
0x9c218 and 0x9c21d:
...
(gdb) p /x start
$7 = 0x9989c
(gdb) p /x end_inclusive
$8 = 0xb200d
...
but it's called for a function at DIE 0x54153 with DW_AT_ranges at 0x40ae:
...
    000040ae 00000000000b1ee0 00000000000b200e
    000040b9 000000000009989c 00000000000998c4
    000040c3 <End of list>
...
and neither range includes 0x9c218 and 0x9c21d.

This is caused by this code in partial_die_info::read:
...
            if (dwarf2_ranges_read (ranges_offset, &lowpc, &highpc, cu,
                                    nullptr, tag))
             has_pc_info = 1;
...
which pretends that the function is located at addresses 0x9989c..0xb200d,
which is indeed not the case.

This patch fixes the first problem encountered: fix the "start address of
zero" complaint warning by removing the baseaddr part from the condition.
Same for dwarf2_ranges_process.

The effect is that:
- the complaint is triggered, and
- the warning / Internal error is no longer triggered.

This does not fix the observed problem in partial_die_info::read, which is
filed as PR28200.

Tested on x86_64-linux.

Co-Authored-By: Simon Marchi <simon.marchi@polymtl.ca>

gdb/ChangeLog:

2021-07-29  Simon Marchi  <simon.marchi@polymtl.ca>
	    Tom de Vries  <tdevries@suse.de>

	PR symtab/28004
	* gdb/dwarf2/read.c (dwarf2_rnglists_process, dwarf2_ranges_process):
	Fix zero address complaint.
	* gdb/testsuite/gdb.dwarf2/dw2-zero-range-shlib.c: New test.
	* gdb/testsuite/gdb.dwarf2/dw2-zero-range.c: New test.
	* gdb/testsuite/gdb.dwarf2/dw2-zero-range.exp: New file.

1 files changed, 2 insertions, 8 deletions

diff --git a/gdb/dwarf2/read.c b/gdb/dwarf2/read.c
index acabee3..bac02b5 100644
--- a/gdb/dwarf2/read.c
+++ b/gdb/dwarf2/read.c
@@ -13631,7 +13631,6 @@ dwarf2_rnglists_process (unsigned offset, struct dwarf2_cu *cu,
   /* Base address selection entry.  */
   gdb::optional<CORE_ADDR> base;
   const gdb_byte *buffer;
-  CORE_ADDR baseaddr;
   bool overflow = false;
   ULONGEST addr_index;
   struct dwarf2_section_info *rnglists_section;
@@ -13648,8 +13647,6 @@ dwarf2_rnglists_process (unsigned offset, struct dwarf2_cu *cu,
     }
   buffer = rnglists_section->buffer + offset;
 
-  baseaddr = objfile->text_section_offset ();
-
   while (1)
     {
       /* Initialize it due to a false compiler warning.  */
@@ -13791,7 +13788,7 @@ dwarf2_rnglists_process (unsigned offset, struct dwarf2_cu *cu,
 
       /* A not-uncommon case of bad debug info.
 	 Don't pollute the addrmap with bad data.  */
-      if (range_beginning + baseaddr == 0
+      if (range_beginning == 0
 	  && !per_objfile->per_bfd->has_section_at_zero)
 	{
 	  complaint (_(".debug_rnglists entry has start address of zero"
@@ -13833,7 +13830,6 @@ dwarf2_ranges_process (unsigned offset, struct dwarf2_cu *cu, dwarf_tag tag,
   gdb::optional<CORE_ADDR> base;
   unsigned int dummy;
   const gdb_byte *buffer;
-  CORE_ADDR baseaddr;
 
   if (cu_header->version >= 5)
     return dwarf2_rnglists_process (offset, cu, tag, callback);
@@ -13849,8 +13845,6 @@ dwarf2_ranges_process (unsigned offset, struct dwarf2_cu *cu, dwarf_tag tag,
     }
   buffer = per_objfile->per_bfd->ranges.buffer + offset;
 
-  baseaddr = objfile->text_section_offset ();
-
   while (1)
     {
       CORE_ADDR range_beginning, range_end;
@@ -13901,7 +13895,7 @@ dwarf2_ranges_process (unsigned offset, struct dwarf2_cu *cu, dwarf_tag tag,
 
       /* A not-uncommon case of bad debug info.
 	 Don't pollute the addrmap with bad data.  */
-      if (range_beginning + baseaddr == 0
+      if (range_beginning == 0
 	  && !per_objfile->per_bfd->has_section_at_zero)
 	{
 	  complaint (_(".debug_ranges entry has start address of zero"