* dve3900-rom.c: Delete file.

	* Makefile.in (dve3900-rom.o): Delete.

1 files changed, 0 insertions, 1069 deletions

diff --git a/gdb/dve3900-rom.c b/gdb/dve3900-rom.c
deleted file mode 100644
index 4a9001c..0000000
--- a/gdb/dve3900-rom.c
+++ /dev/null
@@ -1,1069 +0,0 @@
-/* Remote debugging interface for Densan DVE-R3900 ROM monitor for
-   GDB, the GNU debugger.
-   Copyright (C) 1997, 1998, 2000, 2001 Free Software Foundation, Inc.
-
-   This file is part of GDB.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2 of the License, or
-   (at your option) any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 51 Franklin Street, Fifth Floor,
-   Boston, MA 02110-1301, USA.  */
-
-#include "defs.h"
-#include "gdbcore.h"
-#include "target.h"
-#include "monitor.h"
-#include "serial.h"
-#include "inferior.h"
-#include "command.h"
-#include "gdb_string.h"
-#include <time.h>
-#include "regcache.h"
-#include "mips-tdep.h"
-
-/* Type of function passed to bfd_map_over_sections.  */
-
-typedef void (*section_map_func) (bfd * abfd, asection * sect, void *obj);
-
-/* Packet escape character used by Densan monitor.  */
-
-#define PESC 0xdc
-
-/* Maximum packet size.  This is actually smaller than necessary
-   just to be safe.  */
-
-#define MAXPSIZE 1024
-
-/* External functions.  */
-
-extern void report_transfer_performance (unsigned long, time_t, time_t);
-
-/* Certain registers are "bitmapped", in that the monitor can only display
-   them or let the user modify them as a series of named bitfields.
-   This structure describes a field in a bitmapped register.  */
-
-struct bit_field
-  {
-    char *prefix;		/* string appearing before the value */
-    char *suffix;		/* string appearing after the value */
-    char *user_name;		/* name used by human when entering field value */
-    int length;			/* number of bits in the field */
-    int start;			/* starting (least significant) bit number of field */
-  };
-
-/* Local functions for register manipulation.  */
-
-static void r3900_supply_register (char *regname, int regnamelen,
-				   char *val, int vallen);
-static void fetch_bad_vaddr (void);
-static unsigned long fetch_fields (struct bit_field *bf);
-static void fetch_bitmapped_register (int regno, struct bit_field *bf);
-static void r3900_fetch_registers (int regno);
-static void store_bitmapped_register (int regno, struct bit_field *bf);
-static void r3900_store_registers (int regno);
-
-/* Local functions for fast binary loading.  */
-
-static void write_long (char *buf, long n);
-static void write_long_le (char *buf, long n);
-static int debug_readchar (int hex);
-static void debug_write (unsigned char *buf, int buflen);
-static void ignore_packet (void);
-static void send_packet (char type, unsigned char *buf, int buflen, int seq);
-static void process_read_request (unsigned char *buf, int buflen);
-static void count_section (bfd * abfd, asection * s,
-			   unsigned int *section_count);
-static void load_section (bfd * abfd, asection * s, unsigned int *data_count);
-static void r3900_load (char *filename, int from_tty);
-
-/* Miscellaneous local functions.  */
-
-static void r3900_open (char *args, int from_tty);
-
-
-/* Pointers to static functions in monitor.c for fetching and storing
-   registers.  We can't use these function in certain cases where the Densan
-   monitor acts perversely: for registers that it displays in bit-map
-   format, and those that can't be modified at all.  In those cases
-   we have to use our own functions to fetch and store their values.  */
-
-static void (*orig_monitor_fetch_registers) (int regno);
-static void (*orig_monitor_store_registers) (int regno);
-
-/* Pointer to static function in monitor. for loading programs.
-   We use this function for loading S-records via the serial link.  */
-
-static void (*orig_monitor_load) (char *file, int from_tty);
-
-/* This flag is set if a fast ethernet download should be used.  */
-
-static int ethernet = 0;
-
-/* This array of registers needs to match the indexes used by GDB. The
-   whole reason this exists is because the various ROM monitors use
-   different names than GDB does, and don't support all the registers
-   either.  */
-
-static char *r3900_regnames[] =
-{
-  "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",
-  "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15",
-  "r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23",
-  "r24", "r25", "r26", "r27", "r28", "r29", "r30", "r31",
-
-  "S",				/* PS_REGNUM */
-  "l",				/* MIPS_EMBED_LO_REGNUM */
-  "h",				/* MIPS_EMBED_HI_REGNUM */
-  "B",				/* MIPS_EMBED_BADVADDR_REGNUM */
-  "Pcause",			/* MIPS_EMBED_CAUSE_REGNUM */
-  "p"				/* MIPS_EMBED_PC_REGNUM */
-};
-
-
-/* Table of register names produced by monitor's register dump command.  */
-
-static struct reg_entry
-  {
-    char *name;
-    int regno;
-  }
-reg_table[] =
-{
-  {
-    "r0_zero", 0
-  }
-  ,
-  {
-    "r1_at", 1
-  }
-  ,
-  {
-    "r2_v0", 2
-  }
-  ,
-  {
-    "r3_v1", 3
-  }
-  ,
-  {
-    "r4_a0", 4
-  }
-  ,
-  {
-    "r5_a1", 5
-  }
-  ,
-  {
-    "r6_a2", 6
-  }
-  ,
-  {
-    "r7_a3", 7
-  }
-  ,
-  {
-    "r8_t0", 8
-  }
-  ,
-  {
-    "r9_t1", 9
-  }
-  ,
-  {
-    "r10_t2", 10
-  }
-  ,
-  {
-    "r11_t3", 11
-  }
-  ,
-  {
-    "r12_t4", 12
-  }
-  ,
-  {
-    "r13_t5", 13
-  }
-  ,
-  {
-    "r14_t6", 14
-  }
-  ,
-  {
-    "r15_t7", 15
-  }
-  ,
-  {
-    "r16_s0", 16
-  }
-  ,
-  {
-    "r17_s1", 17
-  }
-  ,
-  {
-    "r18_s2", 18
-  }
-  ,
-  {
-    "r19_s3", 19
-  }
-  ,
-  {
-    "r20_s4", 20
-  }
-  ,
-  {
-    "r21_s5", 21
-  }
-  ,
-  {
-    "r22_s6", 22
-  }
-  ,
-  {
-    "r23_s7", 23
-  }
-  ,
-  {
-    "r24_t8", 24
-  }
-  ,
-  {
-    "r25_t9", 25
-  }
-  ,
-  {
-    "r26_k0", 26
-  }
-  ,
-  {
-    "r27_k1", 27
-  }
-  ,
-  {
-    "r28_gp", 28
-  }
-  ,
-  {
-    "r29_sp", 29
-  }
-  ,
-  {
-    "r30_fp", 30
-  }
-  ,
-  {
-    "r31_ra", 31
-  }
-  ,
-  {
-    "HI", MIPS_EMBED_HI_REGNUM
-  }
-  ,
-  {
-    "LO", MIPS_EMBED_LO_REGNUM
-  }
-  ,
-  {
-    "PC", MIPS_EMBED_PC_REGNUM
-  }
-  ,
-  {
-    "BadV", MIPS_EMBED_BADVADDR_REGNUM
-  }
-  ,
-  {
-    NULL, 0
-  }
-};
-
-
-/* The monitor displays the cache register along with the status register,
-   as if they were a single register.  So when we want to fetch the
-   status register, parse but otherwise ignore the fields of the
-   cache register that the monitor displays.  Register fields that should
-   be ignored have a length of zero in the tables below.  */
-
-static struct bit_field status_fields[] =
-{
-  /* Status register portion */
-  {"SR[<CU=", " ", "cu", 4, 28},
-  {"RE=", " ", "re", 1, 25},
-  {"BEV=", " ", "bev", 1, 22},
-  {"TS=", " ", "ts", 1, 21},
-  {"Nmi=", " ", "nmi", 1, 20},
-  {"INT=", " ", "int", 6, 10},
-  {"SW=", ">]", "sw", 2, 8},
-  {"[<KUO=", " ", "kuo", 1, 5},
-  {"IEO=", " ", "ieo", 1, 4},
-  {"KUP=", " ", "kup", 1, 3},
-  {"IEP=", " ", "iep", 1, 2},
-  {"KUC=", " ", "kuc", 1, 1},
-  {"IEC=", ">]", "iec", 1, 0},
-
-  /* Cache register portion (dummy for parsing only) */
-  {"CR[<IalO=", " ", "ialo", 0, 13},
-  {"DalO=", " ", "dalo", 0, 12},
-  {"IalP=", " ", "ialp", 0, 11},
-  {"DalP=", " ", "dalp", 0, 10},
-  {"IalC=", " ", "ialc", 0, 9},
-  {"DalC=", ">] ", "dalc", 0, 8},
-
-  {NULL, NULL, 0, 0}		/* end of table marker */
-};
-
-
-#if 0				/* FIXME: Enable when we add support for modifying cache register.  */
-static struct bit_field cache_fields[] =
-{
-  /* Status register portion (dummy for parsing only) */
-  {"SR[<CU=", " ", "cu", 0, 28},
-  {"RE=", " ", "re", 0, 25},
-  {"BEV=", " ", "bev", 0, 22},
-  {"TS=", " ", "ts", 0, 21},
-  {"Nmi=", " ", "nmi", 0, 20},
-  {"INT=", " ", "int", 0, 10},
-  {"SW=", ">]", "sw", 0, 8},
-  {"[<KUO=", " ", "kuo", 0, 5},
-  {"IEO=", " ", "ieo", 0, 4},
-  {"KUP=", " ", "kup", 0, 3},
-  {"IEP=", " ", "iep", 0, 2},
-  {"KUC=", " ", "kuc", 0, 1},
-  {"IEC=", ">]", "iec", 0, 0},
-
-  /* Cache register portion  */
-  {"CR[<IalO=", " ", "ialo", 1, 13},
-  {"DalO=", " ", "dalo", 1, 12},
-  {"IalP=", " ", "ialp", 1, 11},
-  {"DalP=", " ", "dalp", 1, 10},
-  {"IalC=", " ", "ialc", 1, 9},
-  {"DalC=", ">] ", "dalc", 1, 8},
-
-  {NULL, NULL, NULL, 0, 0}	/* end of table marker */
-};
-#endif
-
-
-static struct bit_field cause_fields[] =
-{
-  {"<BD=", " ", "bd", 1, 31},
-  {"CE=", " ", "ce", 2, 28},
-  {"IP=", " ", "ip", 6, 10},
-  {"SW=", " ", "sw", 2, 8},
-  {"EC=", ">]", "ec", 5, 2},
-
-  {NULL, NULL, NULL, 0, 0}	/* end of table marker */
-};
-
-
-/* The monitor prints register values in the form
-
-   regname = xxxx xxxx
-
-   We look up the register name in a table, and remove the embedded space in
-   the hex value before passing it to monitor_supply_register.  */
-
-static void
-r3900_supply_register (char *regname, int regnamelen, char *val, int vallen)
-{
-  int regno = -1;
-  int i;
-  char valbuf[10];
-  char *p;
-
-  /* Perform some sanity checks on the register name and value.  */
-  if (regnamelen < 2 || regnamelen > 7 || vallen != 9)
-    return;
-
-  /* Look up the register name.  */
-  for (i = 0; reg_table[i].name != NULL; i++)
-    {
-      int rlen = strlen (reg_table[i].name);
-      if (rlen == regnamelen && strncmp (regname, reg_table[i].name, rlen) == 0)
-	{
-	  regno = reg_table[i].regno;
-	  break;
-	}
-    }
-  if (regno == -1)
-    return;
-
-  /* Copy the hex value to a buffer and eliminate the embedded space. */
-  for (i = 0, p = valbuf; i < vallen; i++)
-    if (val[i] != ' ')
-      *p++ = val[i];
-  *p = '\0';
-
-  monitor_supply_register (regno, valbuf);
-}
-
-
-/* Fetch the BadVaddr register.  Unlike the other registers, this
-   one can't be modified, and the monitor won't even prompt to let
-   you modify it.  */
-
-static void
-fetch_bad_vaddr (void)
-{
-  char buf[20];
-
-  monitor_printf ("xB\r");
-  monitor_expect ("BadV=", NULL, 0);
-  monitor_expect_prompt (buf, sizeof (buf));
-  monitor_supply_register (mips_regnum (current_gdbarch)->badvaddr, buf);
-}
-
-
-/* Read a series of bit fields from the monitor, and return their
-   combined binary value.  */
-
-static unsigned long
-fetch_fields (struct bit_field *bf)
-{
-  char buf[20];
-  unsigned long val = 0;
-  unsigned long bits;
-
-  for (; bf->prefix != NULL; bf++)
-    {
-      monitor_expect (bf->prefix, NULL, 0);	/* get prefix */
-      monitor_expect (bf->suffix, buf, sizeof (buf));	/* hex value, suffix */
-      if (bf->length != 0)
-	{
-	  bits = strtoul (buf, NULL, 16);	/* get field value */
-	  bits &= ((1 << bf->length) - 1);	/* mask out useless bits */
-	  val |= bits << bf->start;	/* insert into register */
-	}
-
-    }
-
-  return val;
-}
-
-
-static void
-fetch_bitmapped_register (int regno, struct bit_field *bf)
-{
-  unsigned long val;
-  unsigned char regbuf[MAX_REGISTER_SIZE];
-  char *regname = NULL;
-
-  if (regno >= sizeof (r3900_regnames) / sizeof (r3900_regnames[0]))
-    internal_error (__FILE__, __LINE__,
-                    _("fetch_bitmapped_register: regno out of bounds"));
-  else
-    regname = r3900_regnames[regno];
-
-  monitor_printf ("x%s\r", regname);
-  val = fetch_fields (bf);
-  monitor_printf (".\r");
-  monitor_expect_prompt (NULL, 0);
-
-  /* supply register stores in target byte order, so swap here */
-
-  store_unsigned_integer (regbuf, register_size (current_gdbarch, regno), val);
-  regcache_raw_supply (current_regcache, regno, regbuf);
-
-}
-
-
-/* Fetch all registers (if regno is -1), or one register from the
-   monitor.  For most registers, we can use the generic monitor_
-   monitor_fetch_registers function.  But others are displayed in
-   a very unusual fashion by the monitor, and must be handled specially.  */
-
-static void
-r3900_fetch_registers (int regno)
-{
-  if (regno == mips_regnum (current_gdbarch)->badvaddr)
-    fetch_bad_vaddr ();
-  else if (regno == PS_REGNUM)
-    fetch_bitmapped_register (PS_REGNUM, status_fields);
-  else if (regno == mips_regnum (current_gdbarch)->cause)
-    fetch_bitmapped_register (mips_regnum (current_gdbarch)->cause,
-			      cause_fields);
-  else
-    orig_monitor_fetch_registers (regno);
-}
-
-
-/* Write the new value of the bitmapped register to the monitor.  */
-
-static void
-store_bitmapped_register (int regno, struct bit_field *bf)
-{
-  unsigned long oldval, newval;
-  char *regname = NULL;
-
-  if (regno >= sizeof (r3900_regnames) / sizeof (r3900_regnames[0]))
-    internal_error (__FILE__, __LINE__,
-                    _("fetch_bitmapped_register: regno out of bounds"));
-  else
-    regname = r3900_regnames[regno];
-
-  /* Fetch the current value of the register.  */
-  monitor_printf ("x%s\r", regname);
-  oldval = fetch_fields (bf);
-  newval = read_register (regno);
-
-  /* To save time, write just the fields that have changed.  */
-  for (; bf->prefix != NULL; bf++)
-    {
-      if (bf->length != 0)
-	{
-	  unsigned long oldbits, newbits, mask;
-
-	  mask = (1 << bf->length) - 1;
-	  oldbits = (oldval >> bf->start) & mask;
-	  newbits = (newval >> bf->start) & mask;
-	  if (oldbits != newbits)
-	    monitor_printf ("%s %lx ", bf->user_name, newbits);
-	}
-    }
-
-  monitor_printf (".\r");
-  monitor_expect_prompt (NULL, 0);
-}
-
-
-static void
-r3900_store_registers (int regno)
-{
-  if (regno == PS_REGNUM)
-    store_bitmapped_register (PS_REGNUM, status_fields);
-  else if (regno == mips_regnum (current_gdbarch)->cause)
-    store_bitmapped_register (mips_regnum (current_gdbarch)->cause,
-			      cause_fields);
-  else
-    orig_monitor_store_registers (regno);
-}
-
-
-/* Write a 4-byte integer to the buffer in big-endian order.  */
-
-static void
-write_long (char *buf, long n)
-{
-  buf[0] = (n >> 24) & 0xff;
-  buf[1] = (n >> 16) & 0xff;
-  buf[2] = (n >> 8) & 0xff;
-  buf[3] = n & 0xff;
-}
-
-
-/* Write a 4-byte integer to the buffer in little-endian order.  */
-
-static void
-write_long_le (char *buf, long n)
-{
-  buf[0] = n & 0xff;
-  buf[1] = (n >> 8) & 0xff;
-  buf[2] = (n >> 16) & 0xff;
-  buf[3] = (n >> 24) & 0xff;
-}
-
-
-/* Read a character from the monitor.  If remote debugging is on,
-   print the received character.  If HEX is non-zero, print the
-   character in hexadecimal; otherwise, print it in ASCII.  */
-
-static int
-debug_readchar (int hex)
-{
-  char buf[10];
-  int c = monitor_readchar ();
-
-  if (remote_debug > 0)
-    {
-      if (hex)
-	sprintf (buf, "[%02x]", c & 0xff);
-      else if (c == '\0')
-	strcpy (buf, "\\0");
-      else
-	{
-	  buf[0] = c;
-	  buf[1] = '\0';
-	}
-      puts_debug ("Read -->", buf, "<--");
-    }
-  return c;
-}
-
-
-/* Send a buffer of characters to the monitor.  If remote debugging is on,
-   print the sent buffer in hex.  */
-
-static void
-debug_write (unsigned char *buf, int buflen)
-{
-  char s[10];
-
-  monitor_write (buf, buflen);
-
-  if (remote_debug > 0)
-    {
-      while (buflen-- > 0)
-	{
-	  sprintf (s, "[%02x]", *buf & 0xff);
-	  puts_debug ("Sent -->", s, "<--");
-	  buf++;
-	}
-    }
-}
-
-
-/* Ignore a packet sent to us by the monitor.  It send packets
-   when its console is in "communications interface" mode.   A packet
-   is of this form:
-
-   start of packet flag (one byte: 0xdc)
-   packet type (one byte)
-   length (low byte)
-   length (high byte)
-   data (length bytes)
-
-   The last two bytes of the data field are a checksum, but we don't
-   bother to verify it.
- */
-
-static void
-ignore_packet (void)
-{
-  int c = -1;
-  int len;
-
-  /* Ignore lots of trash (messages about section addresses, for example)
-     until we see the start of a packet.  */
-  for (len = 0; len < 256; len++)
-    {
-      c = debug_readchar (0);
-      if (c == PESC)
-	break;
-    }
-  if (len == 8)
-    error (_("Packet header byte not found; %02x seen instead."), c);
-
-  /* Read the packet type and length.  */
-  c = debug_readchar (1);	/* type */
-
-  c = debug_readchar (1);	/* low byte of length */
-  len = c & 0xff;
-
-  c = debug_readchar (1);	/* high byte of length */
-  len += (c & 0xff) << 8;
-
-  /* Ignore the rest of the packet.  */
-  while (len-- > 0)
-    c = debug_readchar (1);
-}
-
-
-/* Encapsulate some data into a packet and send it to the monitor.
-
-   The 'p' packet is a special case.  This is a packet we send
-   in response to a read ('r') packet from the monitor.  This function
-   appends a one-byte sequence number to the data field of such a packet.
- */
-
-static void
-send_packet (char type, unsigned char *buf, int buflen, int seq)
-{
-  unsigned char hdr[4];
-  int len = buflen;
-  int sum, i;
-
-  /* If this is a 'p' packet, add one byte for a sequence number.  */
-  if (type == 'p')
-    len++;
-
-  /* If the buffer has a non-zero length, add two bytes for a checksum.  */
-  if (len > 0)
-    len += 2;
-
-  /* Write the packet header.  */
-  hdr[0] = PESC;
-  hdr[1] = type;
-  hdr[2] = len & 0xff;
-  hdr[3] = (len >> 8) & 0xff;
-  debug_write (hdr, sizeof (hdr));
-
-  if (len)
-    {
-      /* Write the packet data.  */
-      debug_write (buf, buflen);
-
-      /* Write the sequence number if this is a 'p' packet.  */
-      if (type == 'p')
-	{
-	  hdr[0] = seq;
-	  debug_write (hdr, 1);
-	}
-
-      /* Write the checksum.  */
-      sum = 0;
-      for (i = 0; i < buflen; i++)
-	{
-	  int tmp = (buf[i] & 0xff);
-	  if (i & 1)
-	    sum += tmp;
-	  else
-	    sum += tmp << 8;
-	}
-      if (type == 'p')
-	{
-	  if (buflen & 1)
-	    sum += (seq & 0xff);
-	  else
-	    sum += (seq & 0xff) << 8;
-	}
-      sum = (sum & 0xffff) + ((sum >> 16) & 0xffff);
-      sum += (sum >> 16) & 1;
-      sum = ~sum;
-
-      hdr[0] = (sum >> 8) & 0xff;
-      hdr[1] = sum & 0xff;
-      debug_write (hdr, 2);
-    }
-}
-
-
-/* Respond to an expected read request from the monitor by sending
-   data in chunks.  Handle all acknowledgements and handshaking packets.
-
-   The monitor expects a response consisting of a one or more 'p' packets,
-   each followed by a portion of the data requested.  The 'p' packet
-   contains only a four-byte integer, the value of which is the number
-   of bytes of data we are about to send.  Following the 'p' packet,
-   the monitor expects the data bytes themselves in raw, unpacketized,
-   form, without even a checksum.
- */
-
-static void
-process_read_request (unsigned char *buf, int buflen)
-{
-  unsigned char len[4];
-  int i, chunk;
-  unsigned char seq;
-
-  /* Discard the read request.  FIXME: we have to hope it's for
-     the exact number of bytes we want to send; should check for this.  */
-  ignore_packet ();
-
-  for (i = chunk = 0, seq = 0; i < buflen; i += chunk, seq++)
-    {
-      /* Don't send more than MAXPSIZE bytes at a time.  */
-      chunk = buflen - i;
-      if (chunk > MAXPSIZE)
-	chunk = MAXPSIZE;
-
-      /* Write a packet containing the number of bytes we are sending.  */
-      write_long_le (len, chunk);
-      send_packet ('p', len, sizeof (len), seq);
-
-      /* Write the data in raw form following the packet.  */
-      debug_write (&buf[i], chunk);
-
-      /* Discard the ACK packet.  */
-      ignore_packet ();
-    }
-
-  /* Send an "end of data" packet.  */
-  send_packet ('e', "", 0, 0);
-}
-
-
-/* Count loadable sections (helper function for r3900_load).  */
-
-static void
-count_section (bfd *abfd, asection *s, unsigned int *section_count)
-{
-  if (s->flags & SEC_LOAD && bfd_section_size (abfd, s) != 0)
-    (*section_count)++;
-}
-
-
-/* Load a single BFD section (helper function for r3900_load).
-
-   WARNING: this code is filled with assumptions about how
-   the Densan monitor loads programs.  The monitor issues
-   packets containing read requests, but rather than respond
-   to them in an general way, we expect them to following
-   a certain pattern.
-
-   For example, we know that the monitor will start loading by
-   issuing an 8-byte read request for the binary file header.
-   We know this is coming and ignore the actual contents
-   of the read request packet.
- */
-
-static void
-load_section (bfd *abfd, asection *s, unsigned int *data_count)
-{
-  if (s->flags & SEC_LOAD)
-    {
-      bfd_size_type section_size = bfd_section_size (abfd, s);
-      bfd_vma section_base = bfd_section_lma (abfd, s);
-      unsigned char *buffer;
-      unsigned char header[8];
-
-      /* Don't output zero-length sections.  */
-      if (section_size == 0)
-	return;
-      if (data_count)
-	*data_count += section_size;
-
-      /* Print some fluff about the section being loaded.  */
-      printf_filtered ("Loading section %s, size 0x%lx lma ",
-		       bfd_section_name (abfd, s), (long) section_size);
-      deprecated_print_address_numeric (section_base, 1, gdb_stdout);
-      printf_filtered ("\n");
-      gdb_flush (gdb_stdout);
-
-      /* Write the section header (location and size).  */
-      write_long (&header[0], (long) section_base);
-      write_long (&header[4], (long) section_size);
-      process_read_request (header, sizeof (header));
-
-      /* Read the section contents into a buffer, write it out,
-         then free the buffer.  */
-      buffer = (unsigned char *) xmalloc (section_size);
-      bfd_get_section_contents (abfd, s, buffer, 0, section_size);
-      process_read_request (buffer, section_size);
-      xfree (buffer);
-    }
-}
-
-
-/* When the ethernet is used as the console port on the Densan board,
-   we can use the "Rm" command to do a fast binary load.  The format
-   of the download data is:
-
-   number of sections (4 bytes)
-   starting address (4 bytes)
-   repeat for each section:
-   location address (4 bytes)
-   section size (4 bytes)
-   binary data
-
-   The 4-byte fields are all in big-endian order.
-
-   Using this command is tricky because we have to put the monitor
-   into a special funky "communications interface" mode, in which
-   it sends and receives packets of data along with the normal prompt.
- */
-
-static void
-r3900_load (char *filename, int from_tty)
-{
-  bfd *abfd;
-  unsigned int data_count = 0;
-  time_t start_time, end_time;	/* for timing of download */
-  int section_count = 0;
-  unsigned char buffer[8];
-
-  /* If we are not using the ethernet, use the normal monitor load,
-     which sends S-records over the serial link.  */
-  if (!ethernet)
-    {
-      orig_monitor_load (filename, from_tty);
-      return;
-    }
-
-  /* Open the file.  */
-  if (filename == NULL || filename[0] == 0)
-    filename = get_exec_file (1);
-  abfd = bfd_openr (filename, 0);
-  if (!abfd)
-    error (_("Unable to open file %s."), filename);
-  if (bfd_check_format (abfd, bfd_object) == 0)
-    error (_("File is not an object file."));
-
-  /* Output the "vconsi" command to get the monitor in the communication
-     state where it will accept a load command.  This will cause
-     the monitor to emit a packet before each prompt, so ignore the packet.  */
-  monitor_printf ("vconsi\r");
-  ignore_packet ();
-  monitor_expect_prompt (NULL, 0);
-
-  /* Output the "Rm" (load) command and respond to the subsequent "open"
-     packet by sending an ACK packet.  */
-  monitor_printf ("Rm\r");
-  ignore_packet ();
-  send_packet ('a', "", 0, 0);
-
-  /* Output the fast load header (number of sections and starting address).  */
-  bfd_map_over_sections ((bfd *) abfd, (section_map_func) count_section,
-			 &section_count);
-  write_long (&buffer[0], (long) section_count);
-  if (exec_bfd)
-    write_long (&buffer[4], (long) bfd_get_start_address (exec_bfd));
-  else
-    write_long (&buffer[4], 0);
-  process_read_request (buffer, sizeof (buffer));
-
-  /* Output the section data.  */
-  start_time = time (NULL);
-  bfd_map_over_sections (abfd, (section_map_func) load_section, &data_count);
-  end_time = time (NULL);
-
-  /* Acknowledge the close packet and put the monitor back into
-     "normal" mode so it won't send packets any more.  */
-  ignore_packet ();
-  send_packet ('a', "", 0, 0);
-  monitor_expect_prompt (NULL, 0);
-  monitor_printf ("vconsx\r");
-  monitor_expect_prompt (NULL, 0);
-
-  /* Print start address and download performance information.  */
-  printf_filtered ("Start address 0x%lx\n", (long) bfd_get_start_address (abfd));
-  report_transfer_performance (data_count, start_time, end_time);
-
-  /* Finally, make the PC point at the start address */
-  if (exec_bfd)
-    write_pc (bfd_get_start_address (exec_bfd));
-
-  inferior_ptid = null_ptid;		/* No process now */
-
-  /* This is necessary because many things were based on the PC at the
-     time that we attached to the monitor, which is no longer valid
-     now that we have loaded new code (and just changed the PC).
-     Another way to do this might be to call normal_stop, except that
-     the stack may not be valid, and things would get horribly
-     confused... */
-  clear_symtab_users ();
-}
-
-
-/* Commands to send to the monitor when first connecting:
-   * The bare carriage return forces a prompt from the monitor
-   (monitor doesn't prompt immediately after a reset).
-   * The "vconsx" switches the monitor back to interactive mode
-   in case an aborted download had left it in packet mode.
-   * The "Xtr" command causes subsequent "t" (trace) commands to display
-   the general registers only.
-   * The "Xxr" command does the same thing for the "x" (examine
-   registers) command.
-   * The "bx" command clears all breakpoints.
- */
-
-static char *r3900_inits[] =
-{"\r", "vconsx\r", "Xtr\r", "Xxr\r", "bx\r", NULL};
-static char *dummy_inits[] =
-{NULL};
-
-static struct target_ops r3900_ops;
-static struct monitor_ops r3900_cmds;
-
-static void
-r3900_open (char *args, int from_tty)
-{
-  char buf[64];
-  int i;
-
-  monitor_open (args, &r3900_cmds, from_tty);
-
-  /* We have to handle sending the init strings ourselves, because
-     the first two strings we send (carriage returns) may not be echoed
-     by the monitor, but the rest will be.  */
-  monitor_printf_noecho ("\r\r");
-  for (i = 0; r3900_inits[i] != NULL; i++)
-    {
-      monitor_printf (r3900_inits[i]);
-      monitor_expect_prompt (NULL, 0);
-    }
-
-  /* Attempt to determine whether the console device is ethernet or serial.
-     This will tell us which kind of load to use (S-records over a serial
-     link, or the Densan fast binary multi-section format over the net).  */
-
-  ethernet = 0;
-  monitor_printf ("v\r");
-  if (monitor_expect ("console device :", NULL, 0) != -1)
-    if (monitor_expect ("\n", buf, sizeof (buf)) != -1)
-      if (strstr (buf, "ethernet") != NULL)
-	ethernet = 1;
-  monitor_expect_prompt (NULL, 0);
-}
-
-void
-_initialize_r3900_rom (void)
-{
-  r3900_cmds.flags = MO_NO_ECHO_ON_OPEN |
-    MO_ADDR_BITS_REMOVE |
-    MO_CLR_BREAK_USES_ADDR |
-    MO_GETMEM_READ_SINGLE |
-    MO_PRINT_PROGRAM_OUTPUT;
-
-  r3900_cmds.init = dummy_inits;
-  r3900_cmds.cont = "g\r";
-  r3900_cmds.step = "t\r";
-  r3900_cmds.set_break = "b %A\r";	/* COREADDR */
-  r3900_cmds.clr_break = "b %A,0\r";	/* COREADDR */
-  r3900_cmds.fill = "fx %A s %x %x\r";	/* COREADDR, len, val */
-
-  r3900_cmds.setmem.cmdb = "sx %A %x\r";	/* COREADDR, val */
-  r3900_cmds.setmem.cmdw = "sh %A %x\r";	/* COREADDR, val */
-  r3900_cmds.setmem.cmdl = "sw %A %x\r";	/* COREADDR, val */
-
-  r3900_cmds.getmem.cmdb = "sx %A\r";	/* COREADDR */
-  r3900_cmds.getmem.cmdw = "sh %A\r";	/* COREADDR */
-  r3900_cmds.getmem.cmdl = "sw %A\r";	/* COREADDR */
-  r3900_cmds.getmem.resp_delim = " : ";
-  r3900_cmds.getmem.term = " ";
-  r3900_cmds.getmem.term_cmd = ".\r";
-
-  r3900_cmds.setreg.cmd = "x%s %x\r";	/* regname, val */
-
-  r3900_cmds.getreg.cmd = "x%s\r";	/* regname */
-  r3900_cmds.getreg.resp_delim = "=";
-  r3900_cmds.getreg.term = " ";
-  r3900_cmds.getreg.term_cmd = ".\r";
-
-  r3900_cmds.dump_registers = "x\r";
-  r3900_cmds.register_pattern =
-    "\\([a-zA-Z0-9_]+\\) *=\\([0-9a-f]+ [0-9a-f]+\\b\\)";
-  r3900_cmds.supply_register = r3900_supply_register;
-  /* S-record download, via "keyboard port".  */
-  r3900_cmds.load = "r0\r";
-  r3900_cmds.prompt = "#";
-  r3900_cmds.line_term = "\r";
-  r3900_cmds.target = &r3900_ops;
-  r3900_cmds.stopbits = SERIAL_1_STOPBITS;
-  r3900_cmds.regnames = r3900_regnames;
-  r3900_cmds.magic = MONITOR_OPS_MAGIC;
-
-  init_monitor_ops (&r3900_ops);
-
-  r3900_ops.to_shortname = "r3900";
-  r3900_ops.to_longname = "R3900 monitor";
-  r3900_ops.to_doc = "Debug using the DVE R3900 monitor.\n\
-Specify the serial device it is connected to (e.g. /dev/ttya).";
-  r3900_ops.to_open = r3900_open;
-
-  /* Override the functions to fetch and store registers.  But save the
-     addresses of the default functions, because we will use those functions
-     for "normal" registers.  */
-
-  orig_monitor_fetch_registers = r3900_ops.to_fetch_registers;
-  orig_monitor_store_registers = r3900_ops.to_store_registers;
-  r3900_ops.to_fetch_registers = r3900_fetch_registers;
-  r3900_ops.to_store_registers = r3900_store_registers;
-
-  /* Override the load function, but save the address of the default
-     function to use when loading S-records over a serial link.  */
-  orig_monitor_load = r3900_ops.to_load;
-  r3900_ops.to_load = r3900_load;
-
-  add_target (&r3900_ops);
-}