Obsolete w65-*-* target.

2 files changed, 220 insertions, 222 deletions

diff --git a/gdb/config/w65/tm-w65.h b/gdb/config/w65/tm-w65.h
index 57f9671..5a1df7c 100644
--- a/gdb/config/w65/tm-w65.h
+++ b/gdb/config/w65/tm-w65.h
@@ -1,214 +1,214 @@
-/* Parameters for execution on a WDC 65816 machine.
-   Copyright 1995, 1998, 1999, 2000 Free Software Foundation, Inc.
-
-   This file is part of GDB.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2 of the License, or
-   (at your option) any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-#include "regcache.h"
-
-/* Contributed by Steve Chamberlain sac@cygnus.com */
-
-#define GDB_TARGET_IS_W65
-
-#define IEEE_FLOAT (1)
-
-/* Define the bit, byte, and word ordering of the machine.  */
-
-#define TARGET_BYTE_ORDER LITTLE_ENDIAN
-
-
-/* Offset from address of function to start of its code.
-   Zero on most machines.  */
-
-#define FUNCTION_START_OFFSET 0
-
-/* Advance PC across any function entry prologue instructions
-   to reach some "real" code.  */
-
-extern CORE_ADDR w65_skip_prologue ();
-
-#define SKIP_PROLOGUE(ip) \
-    {(ip) = w65_skip_prologue(ip);}
-
-
-/* Immediately after a function call, return the saved pc.
-   Can't always go through the frames for this because on some machines
-   the new frame is not set up until the new function executes
-   some instructions. 
-
-   The return address is the value saved in the PR register + 4  */
-
-#define SAVED_PC_AFTER_CALL(frame) \
-  saved_pc_after_call(frame)
-
-
-/* Stack grows downward.  */
-
-#define INNER_THAN(lhs,rhs) ((lhs) < (rhs))
-
-/* Illegal instruction - used by the simulator for breakpoint
-   detection */
-
-#define BREAKPOINT {0xcb}	/* WAI */
-
-/* If your kernel resets the pc after the trap happens you may need to
-   define this before including this file.  */
-#define DECR_PC_AFTER_BREAK 0
-
-/* Return 1 if P points to an invalid floating point value.  */
-
-#define INVALID_FLOAT(p, len) 0	/* Just a first guess; not checked */
-
-/* Say how long registers are.  */
-/*#define REGISTER_TYPE  int */
-
-/* Say how much memory is needed to store a copy of the register set */
-#define REGISTER_BYTES    (NUM_REGS*4)
-
-/* Index within `registers' of the first byte of the space for
-   register N.  */
-
-#define REGISTER_BYTE(N)  ((N)*4)
-
-/* Number of bytes of storage in the actual machine representation
-   for register N.  */
-
-#define REGISTER_RAW_SIZE(N)     (((N) < 16) ? 2 : 4)
-
-#define REGISTER_VIRTUAL_SIZE(N)  REGISTER_RAW_SIZE(N)
-
-/* Largest value REGISTER_RAW_SIZE can have.  */
-
-#define MAX_REGISTER_RAW_SIZE 4
-
-/* Largest value REGISTER_VIRTUAL_SIZE can have.  */
-
-#define MAX_REGISTER_VIRTUAL_SIZE 4
-
-/* Return the GDB type object for the "standard" data type
-   of data in register N.  */
-
-#define REGISTER_VIRTUAL_TYPE(N) \
-  (REGISTER_VIRTUAL_SIZE(N) == 2 ? builtin_type_unsigned_short : builtin_type_unsigned_long)
-
-/* Initializer for an array of names of registers.
-   Entries beyond the first NUM_REGS are ignored.  */
-
-#define REGISTER_NAMES \
-  {"r0","r1","r2", "r3", "r4", "r5", "r6", "r7",  \
-   "r8","r9","r10","r11","r12","r13","r14","r15", \
-   "pc","a", "x",  "y",  "dbr","d",  "s",  "p",   \
-   "ticks","cycles","insts"}
-
-/* Register numbers of various important registers.
-   Note that some of these values are "real" register numbers,
-   and correspond to the general registers of the machine,
-   and some are "phony" register numbers which are too large
-   to be actual register numbers as far as the user is concerned
-   but do serve to get the desired values when passed to read_register.  */
-
-#define SP_REGNUM  22
-#define FP_REGNUM  15
-#define NUM_REGS   27
-#define PC_REGNUM  16
-#define P_REGNUM   23
-
-/* Store the address of the place in which to copy the structure the
-   subroutine will return.  This is called from call_function. 
-
-   We store structs through a pointer passed in R4 */
-
-#define STORE_STRUCT_RETURN(ADDR, SP) \
-    { write_register (4, (ADDR));  }
-
-/* Extract from an array REGBUF containing the (raw) register state
-   a function return value of type TYPE, and copy that, in virtual format,
-   into VALBUF.  */
-
-#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
-  memcpy (VALBUF, (char *)(REGBUF), TYPE_LENGTH(TYPE))
-
-
-/* Write into appropriate registers a function return value
-   of type TYPE, given in virtual format.  
-
-   Things always get returned in R4/R5 */
-
-#define STORE_RETURN_VALUE(TYPE,VALBUF) \
-  write_register_bytes (REGISTER_BYTE(4), VALBUF, TYPE_LENGTH (TYPE))
-
-
-/* Extract from an array REGBUF containing the (raw) register state
-   the address in which a function should return its structure value,
-   as a CORE_ADDR (or an expression that can be used as one).  */
-
-#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (*(CORE_ADDR *)(REGBUF))
-
-/* A macro that tells us whether the function invocation represented
-   by FI does not have a frame on the stack associated with it.  If it
-   does not, FRAMELESS is set to 1, else 0.  */
-
-#define FRAMELESS_FUNCTION_INVOCATION(FI) \
-  (frameless_look_for_prologue (FI))
-
-#define FRAME_CHAIN(FRAME)       w65_frame_chain(FRAME)
-#define FRAME_SAVED_PC(FRAME)    (w65_frame_saved_pc(FRAME))
-#define FRAME_ARGS_ADDRESS(fi)   (fi)->frame
-#define FRAME_LOCALS_ADDRESS(fi) (fi)->frame
-
-/* Set VAL to the number of args passed to frame described by FI.
-   Can set VAL to -1, meaning no way to tell.  */
-
-/* We can't tell how many args there are */
-
-#define FRAME_NUM_ARGS(fi) (-1)
-
-/* Return number of bytes at start of arglist that are not really args.  */
-
-#define FRAME_ARGS_SKIP 0
-
-/* Put here the code to store, into a struct frame_saved_regs,
-   the addresses of the saved registers of frame described by FRAME_INFO.
-   This includes special registers such as pc and fp saved in special
-   ways in the stack frame.  sp is even more special:
-   the address we return for it IS the sp for the next frame.  */
-
-#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs)	    \
-   frame_find_saved_regs(frame_info, &(frame_saved_regs))
-
-typedef unsigned short INSN_WORD;
-
-extern CORE_ADDR w65_addr_bits_remove (CORE_ADDR);
-#define ADDR_BITS_REMOVE(addr) w65_addr_bits_remove (addr)
-
-#define CALL_DUMMY_LENGTH 10
-
-/* Discard from the stack the innermost frame,
-   restoring all saved registers.  */
-
-#define POP_FRAME pop_frame();
-
-
-#define NOP   {0xea}
-
-#define REGISTER_SIZE 4
-
-#define	PRINT_REGISTER_HOOK(regno) print_register_hook(regno)
-
-#define TARGET_INT_BIT  16
-#define TARGET_LONG_BIT 32
-#define TARGET_PTR_BIT  32
+/* OBSOLETE /* Parameters for execution on a WDC 65816 machine. */
+/* OBSOLETE    Copyright 1995, 1998, 1999, 2000 Free Software Foundation, Inc. */
+/* OBSOLETE  */
+/* OBSOLETE    This file is part of GDB. */
+/* OBSOLETE  */
+/* OBSOLETE    This program is free software; you can redistribute it and/or modify */
+/* OBSOLETE    it under the terms of the GNU General Public License as published by */
+/* OBSOLETE    the Free Software Foundation; either version 2 of the License, or */
+/* OBSOLETE    (at your option) any later version. */
+/* OBSOLETE  */
+/* OBSOLETE    This program is distributed in the hope that it will be useful, */
+/* OBSOLETE    but WITHOUT ANY WARRANTY; without even the implied warranty of */
+/* OBSOLETE    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the */
+/* OBSOLETE    GNU General Public License for more details. */
+/* OBSOLETE  */
+/* OBSOLETE    You should have received a copy of the GNU General Public License */
+/* OBSOLETE    along with this program; if not, write to the Free Software */
+/* OBSOLETE    Foundation, Inc., 59 Temple Place - Suite 330, */
+/* OBSOLETE    Boston, MA 02111-1307, USA.  */ */
+/* OBSOLETE  */
+/* OBSOLETE #include "regcache.h" */
+/* OBSOLETE  */
+/* OBSOLETE /* Contributed by Steve Chamberlain sac@cygnus.com */ */
+/* OBSOLETE  */
+/* OBSOLETE #define GDB_TARGET_IS_W65 */
+/* OBSOLETE  */
+/* OBSOLETE #define IEEE_FLOAT (1) */
+/* OBSOLETE  */
+/* OBSOLETE /* Define the bit, byte, and word ordering of the machine.  */ */
+/* OBSOLETE  */
+/* OBSOLETE #define TARGET_BYTE_ORDER LITTLE_ENDIAN */
+/* OBSOLETE  */
+/* OBSOLETE  */
+/* OBSOLETE /* Offset from address of function to start of its code. */
+/* OBSOLETE    Zero on most machines.  */ */
+/* OBSOLETE  */
+/* OBSOLETE #define FUNCTION_START_OFFSET 0 */
+/* OBSOLETE  */
+/* OBSOLETE /* Advance PC across any function entry prologue instructions */
+/* OBSOLETE    to reach some "real" code.  */ */
+/* OBSOLETE  */
+/* OBSOLETE extern CORE_ADDR w65_skip_prologue (); */
+/* OBSOLETE  */
+/* OBSOLETE #define SKIP_PROLOGUE(ip) \ */
+/* OBSOLETE     {(ip) = w65_skip_prologue(ip);} */
+/* OBSOLETE  */
+/* OBSOLETE  */
+/* OBSOLETE /* Immediately after a function call, return the saved pc. */
+/* OBSOLETE    Can't always go through the frames for this because on some machines */
+/* OBSOLETE    the new frame is not set up until the new function executes */
+/* OBSOLETE    some instructions.  */
+/* OBSOLETE  */
+/* OBSOLETE    The return address is the value saved in the PR register + 4  */ */
+/* OBSOLETE  */
+/* OBSOLETE #define SAVED_PC_AFTER_CALL(frame) \ */
+/* OBSOLETE   saved_pc_after_call(frame) */
+/* OBSOLETE  */
+/* OBSOLETE  */
+/* OBSOLETE /* Stack grows downward.  */ */
+/* OBSOLETE  */
+/* OBSOLETE #define INNER_THAN(lhs,rhs) ((lhs) < (rhs)) */
+/* OBSOLETE  */
+/* OBSOLETE /* Illegal instruction - used by the simulator for breakpoint */
+/* OBSOLETE    detection */ */
+/* OBSOLETE  */
+/* OBSOLETE #define BREAKPOINT {0xcb}	/* WAI */ */
+/* OBSOLETE  */
+/* OBSOLETE /* If your kernel resets the pc after the trap happens you may need to */
+/* OBSOLETE    define this before including this file.  */ */
+/* OBSOLETE #define DECR_PC_AFTER_BREAK 0 */
+/* OBSOLETE  */
+/* OBSOLETE /* Return 1 if P points to an invalid floating point value.  */ */
+/* OBSOLETE  */
+/* OBSOLETE #define INVALID_FLOAT(p, len) 0	/* Just a first guess; not checked */ */
+/* OBSOLETE  */
+/* OBSOLETE /* Say how long registers are.  */ */
+/* OBSOLETE /*#define REGISTER_TYPE  int */ */
+/* OBSOLETE  */
+/* OBSOLETE /* Say how much memory is needed to store a copy of the register set */ */
+/* OBSOLETE #define REGISTER_BYTES    (NUM_REGS*4) */
+/* OBSOLETE  */
+/* OBSOLETE /* Index within `registers' of the first byte of the space for */
+/* OBSOLETE    register N.  */ */
+/* OBSOLETE  */
+/* OBSOLETE #define REGISTER_BYTE(N)  ((N)*4) */
+/* OBSOLETE  */
+/* OBSOLETE /* Number of bytes of storage in the actual machine representation */
+/* OBSOLETE    for register N.  */ */
+/* OBSOLETE  */
+/* OBSOLETE #define REGISTER_RAW_SIZE(N)     (((N) < 16) ? 2 : 4) */
+/* OBSOLETE  */
+/* OBSOLETE #define REGISTER_VIRTUAL_SIZE(N)  REGISTER_RAW_SIZE(N) */
+/* OBSOLETE  */
+/* OBSOLETE /* Largest value REGISTER_RAW_SIZE can have.  */ */
+/* OBSOLETE  */
+/* OBSOLETE #define MAX_REGISTER_RAW_SIZE 4 */
+/* OBSOLETE  */
+/* OBSOLETE /* Largest value REGISTER_VIRTUAL_SIZE can have.  */ */
+/* OBSOLETE  */
+/* OBSOLETE #define MAX_REGISTER_VIRTUAL_SIZE 4 */
+/* OBSOLETE  */
+/* OBSOLETE /* Return the GDB type object for the "standard" data type */
+/* OBSOLETE    of data in register N.  */ */
+/* OBSOLETE  */
+/* OBSOLETE #define REGISTER_VIRTUAL_TYPE(N) \ */
+/* OBSOLETE   (REGISTER_VIRTUAL_SIZE(N) == 2 ? builtin_type_unsigned_short : builtin_type_unsigned_long) */
+/* OBSOLETE  */
+/* OBSOLETE /* Initializer for an array of names of registers. */
+/* OBSOLETE    Entries beyond the first NUM_REGS are ignored.  */ */
+/* OBSOLETE  */
+/* OBSOLETE #define REGISTER_NAMES \ */
+/* OBSOLETE   {"r0","r1","r2", "r3", "r4", "r5", "r6", "r7",  \ */
+/* OBSOLETE    "r8","r9","r10","r11","r12","r13","r14","r15", \ */
+/* OBSOLETE    "pc","a", "x",  "y",  "dbr","d",  "s",  "p",   \ */
+/* OBSOLETE    "ticks","cycles","insts"} */
+/* OBSOLETE  */
+/* OBSOLETE /* Register numbers of various important registers. */
+/* OBSOLETE    Note that some of these values are "real" register numbers, */
+/* OBSOLETE    and correspond to the general registers of the machine, */
+/* OBSOLETE    and some are "phony" register numbers which are too large */
+/* OBSOLETE    to be actual register numbers as far as the user is concerned */
+/* OBSOLETE    but do serve to get the desired values when passed to read_register.  */ */
+/* OBSOLETE  */
+/* OBSOLETE #define SP_REGNUM  22 */
+/* OBSOLETE #define FP_REGNUM  15 */
+/* OBSOLETE #define NUM_REGS   27 */
+/* OBSOLETE #define PC_REGNUM  16 */
+/* OBSOLETE #define P_REGNUM   23 */
+/* OBSOLETE  */
+/* OBSOLETE /* Store the address of the place in which to copy the structure the */
+/* OBSOLETE    subroutine will return.  This is called from call_function.  */
+/* OBSOLETE  */
+/* OBSOLETE    We store structs through a pointer passed in R4 */ */
+/* OBSOLETE  */
+/* OBSOLETE #define STORE_STRUCT_RETURN(ADDR, SP) \ */
+/* OBSOLETE     { write_register (4, (ADDR));  } */
+/* OBSOLETE  */
+/* OBSOLETE /* Extract from an array REGBUF containing the (raw) register state */
+/* OBSOLETE    a function return value of type TYPE, and copy that, in virtual format, */
+/* OBSOLETE    into VALBUF.  */ */
+/* OBSOLETE  */
+/* OBSOLETE #define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \ */
+/* OBSOLETE   memcpy (VALBUF, (char *)(REGBUF), TYPE_LENGTH(TYPE)) */
+/* OBSOLETE  */
+/* OBSOLETE  */
+/* OBSOLETE /* Write into appropriate registers a function return value */
+/* OBSOLETE    of type TYPE, given in virtual format.   */
+/* OBSOLETE  */
+/* OBSOLETE    Things always get returned in R4/R5 */ */
+/* OBSOLETE  */
+/* OBSOLETE #define STORE_RETURN_VALUE(TYPE,VALBUF) \ */
+/* OBSOLETE   write_register_bytes (REGISTER_BYTE(4), VALBUF, TYPE_LENGTH (TYPE)) */
+/* OBSOLETE  */
+/* OBSOLETE  */
+/* OBSOLETE /* Extract from an array REGBUF containing the (raw) register state */
+/* OBSOLETE    the address in which a function should return its structure value, */
+/* OBSOLETE    as a CORE_ADDR (or an expression that can be used as one).  */ */
+/* OBSOLETE  */
+/* OBSOLETE #define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (*(CORE_ADDR *)(REGBUF)) */
+/* OBSOLETE  */
+/* OBSOLETE /* A macro that tells us whether the function invocation represented */
+/* OBSOLETE    by FI does not have a frame on the stack associated with it.  If it */
+/* OBSOLETE    does not, FRAMELESS is set to 1, else 0.  */ */
+/* OBSOLETE  */
+/* OBSOLETE #define FRAMELESS_FUNCTION_INVOCATION(FI) \ */
+/* OBSOLETE   (frameless_look_for_prologue (FI)) */
+/* OBSOLETE  */
+/* OBSOLETE #define FRAME_CHAIN(FRAME)       w65_frame_chain(FRAME) */
+/* OBSOLETE #define FRAME_SAVED_PC(FRAME)    (w65_frame_saved_pc(FRAME)) */
+/* OBSOLETE #define FRAME_ARGS_ADDRESS(fi)   (fi)->frame */
+/* OBSOLETE #define FRAME_LOCALS_ADDRESS(fi) (fi)->frame */
+/* OBSOLETE  */
+/* OBSOLETE /* Set VAL to the number of args passed to frame described by FI. */
+/* OBSOLETE    Can set VAL to -1, meaning no way to tell.  */ */
+/* OBSOLETE  */
+/* OBSOLETE /* We can't tell how many args there are */ */
+/* OBSOLETE  */
+/* OBSOLETE #define FRAME_NUM_ARGS(fi) (-1) */
+/* OBSOLETE  */
+/* OBSOLETE /* Return number of bytes at start of arglist that are not really args.  */ */
+/* OBSOLETE  */
+/* OBSOLETE #define FRAME_ARGS_SKIP 0 */
+/* OBSOLETE  */
+/* OBSOLETE /* Put here the code to store, into a struct frame_saved_regs, */
+/* OBSOLETE    the addresses of the saved registers of frame described by FRAME_INFO. */
+/* OBSOLETE    This includes special registers such as pc and fp saved in special */
+/* OBSOLETE    ways in the stack frame.  sp is even more special: */
+/* OBSOLETE    the address we return for it IS the sp for the next frame.  */ */
+/* OBSOLETE  */
+/* OBSOLETE #define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs)	    \ */
+/* OBSOLETE    frame_find_saved_regs(frame_info, &(frame_saved_regs)) */
+/* OBSOLETE  */
+/* OBSOLETE typedef unsigned short INSN_WORD; */
+/* OBSOLETE  */
+/* OBSOLETE extern CORE_ADDR w65_addr_bits_remove (CORE_ADDR); */
+/* OBSOLETE #define ADDR_BITS_REMOVE(addr) w65_addr_bits_remove (addr) */
+/* OBSOLETE  */
+/* OBSOLETE #define CALL_DUMMY_LENGTH 10 */
+/* OBSOLETE  */
+/* OBSOLETE /* Discard from the stack the innermost frame, */
+/* OBSOLETE    restoring all saved registers.  */ */
+/* OBSOLETE  */
+/* OBSOLETE #define POP_FRAME pop_frame(); */
+/* OBSOLETE  */
+/* OBSOLETE  */
+/* OBSOLETE #define NOP   {0xea} */
+/* OBSOLETE  */
+/* OBSOLETE #define REGISTER_SIZE 4 */
+/* OBSOLETE  */
+/* OBSOLETE #define	PRINT_REGISTER_HOOK(regno) print_register_hook(regno) */
+/* OBSOLETE  */
+/* OBSOLETE #define TARGET_INT_BIT  16 */
+/* OBSOLETE #define TARGET_LONG_BIT 32 */
+/* OBSOLETE #define TARGET_PTR_BIT  32 */
diff --git a/gdb/config/w65/w65.mt b/gdb/config/w65/w65.mt
index 06d2325..76c5174 100644
--- a/gdb/config/w65/w65.mt
+++ b/gdb/config/w65/w65.mt
@@ -1,8 +1,6 @@
-# Target: WDC 65816 with simulator
-TDEPFILES= w65-tdep.o
-TM_FILE= tm-w65.h
-
-SIM_OBS = remote-sim.o
-SIM = ../sim/w65/libsim.a
-
-
+# OBSOLETE # Target: WDC 65816 with simulator
+# OBSOLETE TDEPFILES= w65-tdep.o
+# OBSOLETE TM_FILE= tm-w65.h
+# OBSOLETE 
+# OBSOLETE SIM_OBS = remote-sim.o
+# OBSOLETE SIM = ../sim/w65/libsim.a