* config/{*.mt, *.mh}: All target and host makefile fragment

	config files moved to an appropriate config/<cpu> subdirectory.
	* nm-*, xm-*, tm-*:  All native, host, and target files, which
	get linked to nm.h, xm.h, and tm.h respectively by configure,
	moved to appropriate config/<cpu> subdirectory.

1 files changed, 313 insertions, 0 deletions

diff --git a/gdb/config/i386/tm-i386v.h b/gdb/config/i386/tm-i386v.h
new file mode 100644
index 0000000..c9557d3
--- /dev/null
+++ b/gdb/config/i386/tm-i386v.h
@@ -0,0 +1,313 @@
+/* Macro definitions for i386, Unix System V.
+   Copyright 1986, 1987, 1989, 1991, 1992, 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
+
+#if !defined (TM_I386V_H)
+#define TM_I386V_H 1
+
+/*
+ * Changes for 80386 by Pace Willisson (pace@prep.ai.mit.edu)
+ * July 1988
+ */
+
+#define TARGET_BYTE_ORDER LITTLE_ENDIAN
+
+/* turn this on when rest of gdb is ready */
+#define IEEE_FLOAT
+
+/* number of traps that happen between exec'ing the shell 
+ * to run an inferior, and when we finally get to 
+ * the inferior code.  This is 2 on most implementations.
+ */
+#ifndef START_INFERIOR_TRAPS_EXPECTED
+#define START_INFERIOR_TRAPS_EXPECTED 4
+#endif
+
+/* Offset from address of function to start of its code.
+   Zero on most machines.  */
+
+#define FUNCTION_START_OFFSET 0
+
+/* Advance PC across any function entry prologue instructions
+   to reach some "real" code.  */
+
+#define SKIP_PROLOGUE(frompc)   {(frompc) = i386_skip_prologue((frompc));}
+
+extern int
+i386_skip_prologue PARAMS ((int));
+
+/* Immediately after a function call, return the saved pc.
+   Can't always go through the frames for this because on some machines
+   the new frame is not set up until the new function executes
+   some instructions.  */
+
+#define SAVED_PC_AFTER_CALL(frame) \
+  (read_memory_integer (read_register (SP_REGNUM), 4))
+
+/* Address of end of stack space.  */
+
+#define STACK_END_ADDR 0x80000000
+
+/* Stack grows downward.  */
+
+#define INNER_THAN <
+
+/* Sequence of bytes for breakpoint instruction.  */
+
+#define BREAKPOINT {0xcc}
+
+/* Amount PC must be decremented by after a breakpoint.
+   This is often the number of bytes in BREAKPOINT
+   but not always.  */
+
+#ifndef DECR_PC_AFTER_BREAK
+#define DECR_PC_AFTER_BREAK 1
+#endif
+
+/* Nonzero if instruction at PC is a return instruction.  */
+
+#define ABOUT_TO_RETURN(pc) (read_memory_integer (pc, 1) == 0xc3)
+
+/* Return 1 if P points to an invalid floating point value.
+   LEN is the length in bytes -- not relevant on the 386.  */
+
+#define INVALID_FLOAT(p, len) (0)
+
+/* Say how long (ordinary) registers are.  */
+
+#define REGISTER_TYPE long
+
+/* Number of machine registers */
+
+#define NUM_REGS 16
+
+/* Initializer for an array of names of registers.
+   There should be NUM_REGS strings in this initializer.  */
+
+/* the order of the first 8 registers must match the compiler's 
+ * numbering scheme (which is the same as the 386 scheme)
+ * also, this table must match regmap in i386-pinsn.c.
+ */
+#define REGISTER_NAMES { "eax", "ecx", "edx", "ebx", \
+			 "esp", "ebp", "esi", "edi", \
+			 "eip", "ps", "cs", "ss", \
+			 "ds", "es", "fs", "gs", \
+			 }
+
+/* Register numbers of various important registers.
+   Note that some of these values are "real" register numbers,
+   and correspond to the general registers of the machine,
+   and some are "phony" register numbers which are too large
+   to be actual register numbers as far as the user is concerned
+   but do serve to get the desired values when passed to read_register.  */
+
+#define FP_REGNUM 5		/* Contains address of executing stack frame */
+#define SP_REGNUM 4		/* Contains address of top of stack */
+
+#define PC_REGNUM 8
+#define PS_REGNUM 9
+
+/* Total amount of space needed to store our copies of the machine's
+   register state, the array `registers'.  */
+#define REGISTER_BYTES (NUM_REGS * 4)
+
+/* Index within `registers' of the first byte of the space for
+   register N.  */
+
+#define REGISTER_BYTE(N) ((N)*4)
+
+/* Number of bytes of storage in the actual machine representation
+   for register N.  */
+
+#define REGISTER_RAW_SIZE(N) (4)
+
+/* Number of bytes of storage in the program's representation
+   for register N. */
+
+#define REGISTER_VIRTUAL_SIZE(N) (4)
+
+/* Largest value REGISTER_RAW_SIZE can have.  */
+
+#define MAX_REGISTER_RAW_SIZE 4
+
+/* Largest value REGISTER_VIRTUAL_SIZE can have.  */
+
+#define MAX_REGISTER_VIRTUAL_SIZE 4
+
+/* Nonzero if register N requires conversion
+   from raw format to virtual format.  */
+
+#define REGISTER_CONVERTIBLE(N) (0)
+
+/* Convert data from raw format for register REGNUM
+   to virtual format for register REGNUM.  */
+
+#define REGISTER_CONVERT_TO_VIRTUAL(REGNUM,FROM,TO) \
+  {memcpy ((TO), (FROM), 4);}
+
+/* Convert data from virtual format for register REGNUM
+   to raw format for register REGNUM.  */
+
+#define REGISTER_CONVERT_TO_RAW(REGNUM,FROM,TO) \
+  {memcpy ((TO), (FROM), 4);}
+
+/* Return the GDB type object for the "standard" data type
+   of data in register N.  */
+/* Perhaps si and di should go here, but potentially they could be
+   used for things other than address.  */
+#define REGISTER_VIRTUAL_TYPE(N) \
+  ((N) == PC_REGNUM || (N) == FP_REGNUM || (N) == SP_REGNUM ?         \
+   lookup_pointer_type (builtin_type_void) : builtin_type_int)
+
+/* Store the address of the place in which to copy the structure the
+   subroutine will return.  This is called from call_function. */
+
+#define STORE_STRUCT_RETURN(ADDR, SP) \
+  { (SP) -= sizeof (ADDR);		\
+    write_memory ((SP), (char *) &(ADDR), sizeof (ADDR)); }
+
+/* Extract from an array REGBUF containing the (raw) register state
+   a function return value of type TYPE, and copy that, in virtual format,
+   into VALBUF.  */
+
+#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
+  memcpy ((VALBUF), (REGBUF), TYPE_LENGTH (TYPE))
+
+/* Write into appropriate registers a function return value
+   of type TYPE, given in virtual format.  */
+
+#define STORE_RETURN_VALUE(TYPE,VALBUF) \
+  write_register_bytes (0, VALBUF, TYPE_LENGTH (TYPE))
+
+/* Extract from an array REGBUF containing the (raw) register state
+   the address in which a function should return its structure value,
+   as a CORE_ADDR (or an expression that can be used as one).  */
+
+#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (*(int *)(REGBUF))
+
+
+/* Describe the pointer in each stack frame to the previous stack frame
+   (its caller).  */
+
+/* FRAME_CHAIN takes a frame's nominal address
+   and produces the frame's chain-pointer. */
+
+#define FRAME_CHAIN(thisframe) \
+  (!inside_entry_file ((thisframe)->pc) ? \
+   read_memory_integer ((thisframe)->frame, 4) :\
+   0)
+
+/* Define other aspects of the stack frame.  */
+
+/* A macro that tells us whether the function invocation represented
+   by FI does not have a frame on the stack associated with it.  If it
+   does not, FRAMELESS is set to 1, else 0.  */
+#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) \
+  (FRAMELESS) = frameless_look_for_prologue(FI)
+
+#define FRAME_SAVED_PC(FRAME) (read_memory_integer ((FRAME)->frame + 4, 4))
+
+#define FRAME_ARGS_ADDRESS(fi) ((fi)->frame)
+
+#define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame)
+
+/* Return number of args passed to a frame.
+   Can return -1, meaning no way to tell.  */
+
+#define FRAME_NUM_ARGS(numargs, fi) (numargs) = i386_frame_num_args(fi)
+
+#ifdef __STDC__		/* Forward decl's for prototypes */
+struct frame_info;
+struct frame_saved_regs;
+#endif
+
+extern int
+i386_frame_num_args PARAMS ((struct frame_info *));
+
+/* Return number of bytes at start of arglist that are not really args.  */
+
+#define FRAME_ARGS_SKIP 8
+
+/* Put here the code to store, into a struct frame_saved_regs,
+   the addresses of the saved registers of frame described by FRAME_INFO.
+   This includes special registers such as pc and fp saved in special
+   ways in the stack frame.  sp is even more special:
+   the address we return for it IS the sp for the next frame.  */
+
+#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) \
+{ i386_frame_find_saved_regs ((frame_info), &(frame_saved_regs)); }
+
+extern void
+i386_frame_find_saved_regs PARAMS ((struct frame_info *,
+				    struct frame_saved_regs *));
+
+
+/* Things needed for making the inferior call functions.  */
+
+/* Push an empty stack frame, to record the current PC, etc.  */
+
+#define PUSH_DUMMY_FRAME { i386_push_dummy_frame (); }
+
+extern void
+i386_push_dummy_frame PARAMS ((void));
+
+/* Discard from the stack the innermost frame, restoring all registers.  */
+
+#define POP_FRAME  { i386_pop_frame (); }
+
+extern void
+i386_pop_frame PARAMS ((void));
+
+/* this is 
+ *   call 11223344 (32 bit relative)
+ *   int3
+ */
+
+#define CALL_DUMMY { 0x223344e8, 0xcc11 }
+
+#define CALL_DUMMY_LENGTH 8
+
+#define CALL_DUMMY_START_OFFSET 0  /* Start execution at beginning of dummy */
+
+/* Insert the specified number of args and function address
+   into a call sequence of the above form stored at DUMMYNAME.  */
+
+#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p)   \
+{ \
+	int from, to, delta, loc; \
+	loc = (int)(read_register (SP_REGNUM) - CALL_DUMMY_LENGTH); \
+	from = loc + 5; \
+	to = (int)(fun); \
+	delta = to - from; \
+	*((char *)(dummyname) + 1) = (delta & 0xff); \
+	*((char *)(dummyname) + 2) = ((delta >> 8) & 0xff); \
+	*((char *)(dummyname) + 3) = ((delta >> 16) & 0xff); \
+	*((char *)(dummyname) + 4) = ((delta >> 24) & 0xff); \
+}
+
+extern void
+print_387_control_word PARAMS ((unsigned int));
+
+extern void
+print_387_status_word PARAMS ((unsigned int));
+
+/* Offset from SP to first arg on stack at first instruction of a function */
+
+#define SP_ARG0 (1 * 4)
+
+#endif	/* !defined (TM_I386V_H) */