RISC-V: Update ABI to the elf_flags after parsing elf attributes.

Originally, if the -mabi option isn't set, then assembler will set the
abi according to the architecture string in the riscv_after_parse_args.
But we should also check and reset the abi later since the architecture
string may be reset by the elf attributes.  Therefore, set the abi to
the elf_flags in the riscv_after_parse_args seems too early.  Besides,
we have to set the abi_xlen before assembling any instruction, so it
should be safe to call riscv_set_abi_by_arch at the place that we set
start_assemble to TRUE.  However, one minor case is that we won't call
the md_assemble when we are assembling an file without any instruction.
It seems that we still need to set the abi in riscv_elf_final_processing,
to make sure that abi can be updated according to the elf arch attributes.

For the rv32i and most elf toolchains, this patch can fix the mis-matched
ABI errors for Run pr26391-5 and Run pr26391-6 testcases.  Besides, it
also correct the elf header flags of the output objects.  Consider the
new testcases, mabi-fail-02 and mabi-noabi-attr-[01|02|03], they are
failed before applying this patch.

But I still get the mis-matched ABI errors for the following toolchains
when runnung the riscv-gnu-toolchain regressions,

newlib-rv32imafc-ilp32f-[medlow|medany]
linux-rv32imac-ilp32-[medlow|medany]
linux-rv32imafdc-ilp32-[medlow|medany}
linux-rv64imac-lp64-[medlow|medany]
linux-rv64imafdc-lp64-[medlow|medany}

For the newlib-rv32imafc-ilp32f, although we try to choose the abi
according to the elf attributes, we will use FLOAT_ABI_SOFT rather
than the FLOAT_ABI_SINGLE for the assmebly file wihtout setting the
-mabi, but compiler will set the abi to FLOAT_ABI_SINGLE for the
C files.

As for the linux toolchains, we also get fails for Run pr26391-5 and
Run pr26391-6 testcases.  Since the linux toolchain won't generate elf
attributes to correct the ISA, and the --with-arch configure option
isn't set, assembler will try to set the default arch to rv[32|64]g,
which means the FLOAT_ABI_DOUBLE will be choosed, and may be conflict
with the abi set by the toolchain.

Therefore, I would suggest that it's is more safe to set the --with-arch
when building binutils, but it may break some testcases.  For example,
ld-scripts/fill and ld-scripts/empty-address-2 may be broken when c-ext
is set.  We might insert R_RISCV_ALIGN to make sure the 4-byte alignment,
but the dump result will be a bit different from what the testcase expected.

However, this patch only fix the problem - the abi, elf_flags and the
instruction, which is generated according to the abi_xlen, are all fixed
once the elf attributes are set for most elf toolchains. Other mis-matched
ABI problems should be fixed when we always build the binutils with the
--with-arch= configure option.

	gas/
	* config/tc-riscv.c (explicit_mabi): New boolean to indicate if
	the -mabi= option is explictly set.
	(md_parse_option): Set explicit_mabi to TRUE if -mabi is set.
	(riscv_set_abi_by_arch): New function.  If the -mabi option isn't
	set, then we set the abi according to the architecture string.
	Otherwise, check if there are conflicts between architecture
	and abi setting.
	(riscv_after_parse_args): Move the abi setting to md_assemble nad
	riscv_elf_final_processing.
	(md_assemble): Call the riscv_set_abi_by_arch when we set the
	start_assemble to TRUE.
	(riscv_elf_final_processing): Likewise, in case the file without
	any instruction.

	* testsuite/gas/riscv/mabi-attr-01.s: New testcase.
	* testsuite/gas/riscv/mabi-attr-02.s: Likewise.
	* testsuite/gas/riscv/mabi-attr-03.s: Likewise.
	* testsuite/gas/riscv/mabi-fail-01.d: Likewise.
	* testsuite/gas/riscv/mabi-fail-01.l: Likewise.
	* testsuite/gas/riscv/mabi-fail-02.d: Likewise.
	* testsuite/gas/riscv/mabi-fail-02.l: Likewise.
	* testsuite/gas/riscv/mabi-noabi-attr-01a.d: Likewise.
	* testsuite/gas/riscv/mabi-noabi-attr-01b.d: Likewise.
	* testsuite/gas/riscv/mabi-noabi-attr-02a.d: Likewise.
	* testsuite/gas/riscv/mabi-noabi-attr-02b.d: Likewise.
	* testsuite/gas/riscv/mabi-noabi-attr-03a.d: Likewise.
	* testsuite/gas/riscv/mabi-noabi-attr-03b.d: Likewise.
	* testsuite/gas/riscv/mabi-noabi-march-01.d: Likewise.
	* testsuite/gas/riscv/mabi-noabi-march-02.d: Likewise.
	* testsuite/gas/riscv/mabi-noabi-march-03.d: Likewise.

1 files changed, 55 insertions, 47 deletions

diff --git a/gas/config/tc-riscv.c b/gas/config/tc-riscv.c
index 7c22843..2340ff5 100644
--- a/gas/config/tc-riscv.c
+++ b/gas/config/tc-riscv.c
@@ -91,6 +91,14 @@ static enum riscv_priv_spec_class default_priv_spec = PRIV_SPEC_CLASS_NONE;
 static unsigned xlen = 0; /* width of an x-register */
 static unsigned abi_xlen = 0; /* width of a pointer in the ABI */
 static bfd_boolean rve_abi = FALSE;
+enum float_abi {
+  FLOAT_ABI_DEFAULT = -1,
+  FLOAT_ABI_SOFT,
+  FLOAT_ABI_SINGLE,
+  FLOAT_ABI_DOUBLE,
+  FLOAT_ABI_QUAD
+};
+static enum float_abi float_abi = FLOAT_ABI_DEFAULT;
 
 #define LOAD_ADDRESS_INSN (abi_xlen == 64 ? "ld" : "lw")
 #define ADD32_INSN (xlen == 64 ? "addiw" : "addi")
@@ -311,6 +319,50 @@ riscv_set_arch (const char *s)
   riscv_parse_subset (&rps, s);
 }
 
+/* Indicate -mabi= option is explictly set.  */
+static bfd_boolean explicit_mabi = FALSE;
+
+static void
+riscv_set_abi (unsigned new_xlen, enum float_abi new_float_abi, bfd_boolean rve)
+{
+  abi_xlen = new_xlen;
+  float_abi = new_float_abi;
+  rve_abi = rve;
+}
+
+/* If the -mabi option isn't set, then we set the abi according to the arch
+   string.  Otherwise, check if there are conflicts between architecture
+   and abi setting.  */
+
+static void
+riscv_set_abi_by_arch (void)
+{
+  if (!explicit_mabi)
+    {
+      if (riscv_subset_supports ("q"))
+	riscv_set_abi (xlen, FLOAT_ABI_QUAD, FALSE);
+      else if (riscv_subset_supports ("d"))
+	riscv_set_abi (xlen, FLOAT_ABI_DOUBLE, FALSE);
+      else
+	riscv_set_abi (xlen, FLOAT_ABI_SOFT, FALSE);
+    }
+  else
+    {
+      gas_assert (abi_xlen != 0 && xlen != 0 && float_abi != FLOAT_ABI_DEFAULT);
+      if (abi_xlen > xlen)
+	as_bad ("can't have %d-bit ABI on %d-bit ISA", abi_xlen, xlen);
+      else if (abi_xlen < xlen)
+	as_bad ("%d-bit ABI not yet supported on %d-bit ISA", abi_xlen, xlen);
+    }
+
+  /* Update the EF_RISCV_FLOAT_ABI field of elf_flags.  */
+  elf_flags &= ~EF_RISCV_FLOAT_ABI;
+  elf_flags |= float_abi << 1;
+
+  if (rve_abi)
+    elf_flags |= EF_RISCV_RVE;
+}
+
 /* Handle of the OPCODE hash table.  */
 static htab_t op_hash = NULL;
 
@@ -2542,6 +2594,7 @@ md_assemble (char *str)
   if (!start_assemble)
     {
       start_assemble = TRUE;
+      riscv_set_abi_by_arch ();
 
       /* Set the default_priv_spec according to the priv attributes.  */
       if (!riscv_set_default_priv_spec (NULL))
@@ -2613,23 +2666,6 @@ struct option md_longopts[] =
 };
 size_t md_longopts_size = sizeof (md_longopts);
 
-enum float_abi {
-  FLOAT_ABI_DEFAULT = -1,
-  FLOAT_ABI_SOFT,
-  FLOAT_ABI_SINGLE,
-  FLOAT_ABI_DOUBLE,
-  FLOAT_ABI_QUAD
-};
-static enum float_abi float_abi = FLOAT_ABI_DEFAULT;
-
-static void
-riscv_set_abi (unsigned new_xlen, enum float_abi new_float_abi, bfd_boolean rve)
-{
-  abi_xlen = new_xlen;
-  float_abi = new_float_abi;
-  rve_abi = rve;
-}
-
 int
 md_parse_option (int c, const char *arg)
 {
@@ -2670,6 +2706,7 @@ md_parse_option (int c, const char *arg)
 	riscv_set_abi (64, FLOAT_ABI_QUAD, FALSE);
       else
 	return 0;
+      explicit_mabi = TRUE;
       break;
 
     case OPTION_RELAX:
@@ -2754,36 +2791,6 @@ riscv_after_parse_args (void)
   if (default_priv_spec == PRIV_SPEC_CLASS_NONE)
     riscv_set_default_priv_spec (DEFAULT_RISCV_PRIV_SPEC);
 
-  /* Infer ABI from ISA if not specified on command line.  */
-  if (abi_xlen == 0)
-    abi_xlen = xlen;
-  else if (abi_xlen > xlen)
-    as_bad ("can't have %d-bit ABI on %d-bit ISA", abi_xlen, xlen);
-  else if (abi_xlen < xlen)
-    as_bad ("%d-bit ABI not yet supported on %d-bit ISA", abi_xlen, xlen);
-
-  if (float_abi == FLOAT_ABI_DEFAULT)
-    {
-      riscv_subset_t *subset;
-
-      /* Assume soft-float unless D extension is present.  */
-      float_abi = FLOAT_ABI_SOFT;
-
-      for (subset = riscv_subsets.head; subset != NULL; subset = subset->next)
-	{
-	  if (strcasecmp (subset->name, "D") == 0)
-	    float_abi = FLOAT_ABI_DOUBLE;
-	  if (strcasecmp (subset->name, "Q") == 0)
-	    float_abi = FLOAT_ABI_QUAD;
-	}
-    }
-
-  if (rve_abi)
-    elf_flags |= EF_RISCV_RVE;
-
-  /* Insert float_abi into the EF_RISCV_FLOAT_ABI field of elf_flags.  */
-  elf_flags |= float_abi * (EF_RISCV_FLOAT_ABI & ~(EF_RISCV_FLOAT_ABI << 1));
-
   /* If the CIE to be produced has not been overridden on the command line,
      then produce version 3 by default.  This allows us to use the full
      range of registers in a .cfi_return_column directive.  */
@@ -3514,6 +3521,7 @@ tc_riscv_regname_to_dw2regnum (char *regname)
 void
 riscv_elf_final_processing (void)
 {
+  riscv_set_abi_by_arch ();
   elf_elfheader (stdoutput)->e_flags |= elf_flags;
 }