aboutsummaryrefslogtreecommitdiff
path: root/etc/make-stds.texi
diff options
context:
space:
mode:
authorRichard Henderson <rth@redhat.com>1999-05-03 07:29:11 +0000
committerRichard Henderson <rth@redhat.com>1999-05-03 07:29:11 +0000
commit252b5132c753830d5fd56823373aed85f2a0db63 (patch)
tree1af963bfd8d3e55167b81def4207f175eaff3a56 /etc/make-stds.texi
downloadgdb-252b5132c753830d5fd56823373aed85f2a0db63.zip
gdb-252b5132c753830d5fd56823373aed85f2a0db63.tar.gz
gdb-252b5132c753830d5fd56823373aed85f2a0db63.tar.bz2
19990502 sourceware importbinu_ss_19990502
Diffstat (limited to 'etc/make-stds.texi')
-rw-r--r--etc/make-stds.texi914
1 files changed, 914 insertions, 0 deletions
diff --git a/etc/make-stds.texi b/etc/make-stds.texi
new file mode 100644
index 0000000..2149764
--- /dev/null
+++ b/etc/make-stds.texi
@@ -0,0 +1,914 @@
+@comment This file is included by both standards.texi and make.texinfo.
+@comment It was broken out of standards.texi on 1/6/93 by roland.
+
+@node Makefile Conventions
+@chapter Makefile Conventions
+@comment standards.texi does not print an index, but make.texinfo does.
+@cindex makefile, conventions for
+@cindex conventions for makefiles
+@cindex standards for makefiles
+
+This
+@ifinfo
+node
+@end ifinfo
+@iftex
+@ifset CODESTD
+section
+@end ifset
+@ifclear CODESTD
+chapter
+@end ifclear
+@end iftex
+describes conventions for writing the Makefiles for GNU programs.
+
+@menu
+* Makefile Basics:: General Conventions for Makefiles
+* Utilities in Makefiles:: Utilities in Makefiles
+* Command Variables:: Variables for Specifying Commands
+* Directory Variables:: Variables for Installation Directories
+* Standard Targets:: Standard Targets for Users
+* Install Command Categories:: Three categories of commands in the `install'
+ rule: normal, pre-install and post-install.
+@end menu
+
+@node Makefile Basics
+@section General Conventions for Makefiles
+
+Every Makefile should contain this line:
+
+@example
+SHELL = /bin/sh
+@end example
+
+@noindent
+to avoid trouble on systems where the @code{SHELL} variable might be
+inherited from the environment. (This is never a problem with GNU
+@code{make}.)
+
+Different @code{make} programs have incompatible suffix lists and
+implicit rules, and this sometimes creates confusion or misbehavior. So
+it is a good idea to set the suffix list explicitly using only the
+suffixes you need in the particular Makefile, like this:
+
+@example
+.SUFFIXES:
+.SUFFIXES: .c .o
+@end example
+
+@noindent
+The first line clears out the suffix list, the second introduces all
+suffixes which may be subject to implicit rules in this Makefile.
+
+Don't assume that @file{.} is in the path for command execution. When
+you need to run programs that are a part of your package during the
+make, please make sure that it uses @file{./} if the program is built as
+part of the make or @file{$(srcdir)/} if the file is an unchanging part
+of the source code. Without one of these prefixes, the current search
+path is used.
+
+The distinction between @file{./} (the @dfn{build directory}) and
+@file{$(srcdir)/} (the @dfn{source directory}) is important because
+users can build in a separate directory using the @samp{--srcdir} option
+to @file{configure}. A rule of the form:
+
+@smallexample
+foo.1 : foo.man sedscript
+ sed -e sedscript foo.man > foo.1
+@end smallexample
+
+@noindent
+will fail when the build directory is not the source directory, because
+@file{foo.man} and @file{sedscript} are in the the source directory.
+
+When using GNU @code{make}, relying on @samp{VPATH} to find the source
+file will work in the case where there is a single dependency file,
+since the @code{make} automatic variable @samp{$<} will represent the
+source file wherever it is. (Many versions of @code{make} set @samp{$<}
+only in implicit rules.) A Makefile target like
+
+@smallexample
+foo.o : bar.c
+ $(CC) -I. -I$(srcdir) $(CFLAGS) -c bar.c -o foo.o
+@end smallexample
+
+@noindent
+should instead be written as
+
+@smallexample
+foo.o : bar.c
+ $(CC) -I. -I$(srcdir) $(CFLAGS) -c $< -o $@@
+@end smallexample
+
+@noindent
+in order to allow @samp{VPATH} to work correctly. When the target has
+multiple dependencies, using an explicit @samp{$(srcdir)} is the easiest
+way to make the rule work well. For example, the target above for
+@file{foo.1} is best written as:
+
+@smallexample
+foo.1 : foo.man sedscript
+ sed -e $(srcdir)/sedscript $(srcdir)/foo.man > $@@
+@end smallexample
+
+GNU distributions usually contain some files which are not source
+files---for example, Info files, and the output from Autoconf, Automake,
+Bison or Flex. Since these files normally appear in the source
+directory, they should always appear in the source directory, not in the
+build directory. So Makefile rules to update them should put the
+updated files in the source directory.
+
+However, if a file does not appear in the distribution, then the
+Makefile should not put it in the source directory, because building a
+program in ordinary circumstances should not modify the source directory
+in any way.
+
+Try to make the build and installation targets, at least (and all their
+subtargets) work correctly with a parallel @code{make}.
+
+@node Utilities in Makefiles
+@section Utilities in Makefiles
+
+Write the Makefile commands (and any shell scripts, such as
+@code{configure}) to run in @code{sh}, not in @code{csh}. Don't use any
+special features of @code{ksh} or @code{bash}.
+
+The @code{configure} script and the Makefile rules for building and
+installation should not use any utilities directly except these:
+
+@c dd find
+@c gunzip gzip md5sum
+@c mkfifo mknod tee uname
+
+@example
+cat cmp cp diff echo egrep expr false grep install-info
+ln ls mkdir mv pwd rm rmdir sed sleep sort tar test touch true
+@end example
+
+The compression program @code{gzip} can be used in the @code{dist} rule.
+
+Stick to the generally supported options for these programs. For
+example, don't use @samp{mkdir -p}, convenient as it may be, because
+most systems don't support it.
+
+It is a good idea to avoid creating symbolic links in makefiles, since a
+few systems don't support them.
+
+The Makefile rules for building and installation can also use compilers
+and related programs, but should do so via @code{make} variables so that the
+user can substitute alternatives. Here are some of the programs we
+mean:
+
+@example
+ar bison cc flex install ld ldconfig lex
+make makeinfo ranlib texi2dvi yacc
+@end example
+
+Use the following @code{make} variables to run those programs:
+
+@example
+$(AR) $(BISON) $(CC) $(FLEX) $(INSTALL) $(LD) $(LDCONFIG) $(LEX)
+$(MAKE) $(MAKEINFO) $(RANLIB) $(TEXI2DVI) $(YACC)
+@end example
+
+When you use @code{ranlib} or @code{ldconfig}, you should make sure
+nothing bad happens if the system does not have the program in question.
+Arrange to ignore an error from that command, and print a message before
+the command to tell the user that failure of this command does not mean
+a problem. (The Autoconf @samp{AC_PROG_RANLIB} macro can help with
+this.)
+
+If you use symbolic links, you should implement a fallback for systems
+that don't have symbolic links.
+
+Additional utilities that can be used via Make variables are:
+
+@example
+chgrp chmod chown mknod
+@end example
+
+It is ok to use other utilities in Makefile portions (or scripts)
+intended only for particular systems where you know those utilities
+exist.
+
+@node Command Variables
+@section Variables for Specifying Commands
+
+Makefiles should provide variables for overriding certain commands, options,
+and so on.
+
+In particular, you should run most utility programs via variables.
+Thus, if you use Bison, have a variable named @code{BISON} whose default
+value is set with @samp{BISON = bison}, and refer to it with
+@code{$(BISON)} whenever you need to use Bison.
+
+File management utilities such as @code{ln}, @code{rm}, @code{mv}, and
+so on, need not be referred to through variables in this way, since users
+don't need to replace them with other programs.
+
+Each program-name variable should come with an options variable that is
+used to supply options to the program. Append @samp{FLAGS} to the
+program-name variable name to get the options variable name---for
+example, @code{BISONFLAGS}. (The names @code{CFLAGS} for the C
+compiler, @code{YFLAGS} for yacc, and @code{LFLAGS} for lex, are
+exceptions to this rule, but we keep them because they are standard.)
+Use @code{CPPFLAGS} in any compilation command that runs the
+preprocessor, and use @code{LDFLAGS} in any compilation command that
+does linking as well as in any direct use of @code{ld}.
+
+If there are C compiler options that @emph{must} be used for proper
+compilation of certain files, do not include them in @code{CFLAGS}.
+Users expect to be able to specify @code{CFLAGS} freely themselves.
+Instead, arrange to pass the necessary options to the C compiler
+independently of @code{CFLAGS}, by writing them explicitly in the
+compilation commands or by defining an implicit rule, like this:
+
+@smallexample
+CFLAGS = -g
+ALL_CFLAGS = -I. $(CFLAGS)
+.c.o:
+ $(CC) -c $(CPPFLAGS) $(ALL_CFLAGS) $<
+@end smallexample
+
+Do include the @samp{-g} option in @code{CFLAGS}, because that is not
+@emph{required} for proper compilation. You can consider it a default
+that is only recommended. If the package is set up so that it is
+compiled with GCC by default, then you might as well include @samp{-O}
+in the default value of @code{CFLAGS} as well.
+
+Put @code{CFLAGS} last in the compilation command, after other variables
+containing compiler options, so the user can use @code{CFLAGS} to
+override the others.
+
+@code{CFLAGS} should be used in every invocation of the C compiler,
+both those which do compilation and those which do linking.
+
+Every Makefile should define the variable @code{INSTALL}, which is the
+basic command for installing a file into the system.
+
+Every Makefile should also define the variables @code{INSTALL_PROGRAM}
+and @code{INSTALL_DATA}. (The default for each of these should be
+@code{$(INSTALL)}.) Then it should use those variables as the commands
+for actual installation, for executables and nonexecutables
+respectively. Use these variables as follows:
+
+@example
+$(INSTALL_PROGRAM) foo $(bindir)/foo
+$(INSTALL_DATA) libfoo.a $(libdir)/libfoo.a
+@end example
+
+Optionally, you may prepend the value of @code{DESTDIR} to the target
+filename. Doing this allows the installer to create a snapshot of the
+installation to be copied onto the real target filesystem later. Do not
+set the value of @code{DESTDIR} in your Makefile, and do not include it
+in any installed files. With support for @code{DESTDIR}, the above
+examples become:
+
+@example
+$(INSTALL_PROGRAM) foo $(DESTDIR)$(bindir)/foo
+$(INSTALL_DATA) libfoo.a $(DESTDIR)$(libdir)/libfoo.a
+@end example
+
+@noindent
+Always use a file name, not a directory name, as the second argument of
+the installation commands. Use a separate command for each file to be
+installed.
+
+@node Directory Variables
+@section Variables for Installation Directories
+
+Installation directories should always be named by variables, so it is
+easy to install in a nonstandard place. The standard names for these
+variables are described below. They are based on a standard filesystem
+layout; variants of it are used in SVR4, 4.4BSD, Linux, Ultrix v4, and
+other modern operating systems.
+
+These two variables set the root for the installation. All the other
+installation directories should be subdirectories of one of these two,
+and nothing should be directly installed into these two directories.
+
+@table @samp
+@item prefix
+A prefix used in constructing the default values of the variables listed
+below. The default value of @code{prefix} should be @file{/usr/local}.
+When building the complete GNU system, the prefix will be empty and
+@file{/usr} will be a symbolic link to @file{/}.
+(If you are using Autoconf, write it as @samp{@@prefix@@}.)
+
+Running @samp{make install} with a different value of @code{prefix}
+from the one used to build the program should @var{not} recompile
+the program.
+
+@item exec_prefix
+A prefix used in constructing the default values of some of the
+variables listed below. The default value of @code{exec_prefix} should
+be @code{$(prefix)}.
+(If you are using Autoconf, write it as @samp{@@exec_prefix@@}.)
+
+Generally, @code{$(exec_prefix)} is used for directories that contain
+machine-specific files (such as executables and subroutine libraries),
+while @code{$(prefix)} is used directly for other directories.
+
+Running @samp{make install} with a different value of @code{exec_prefix}
+from the one used to build the program should @var{not} recompile the
+program.
+@end table
+
+Executable programs are installed in one of the following directories.
+
+@table @samp
+@item bindir
+The directory for installing executable programs that users can run.
+This should normally be @file{/usr/local/bin}, but write it as
+@file{$(exec_prefix)/bin}.
+(If you are using Autoconf, write it as @samp{@@bindir@@}.)
+
+@item sbindir
+The directory for installing executable programs that can be run from
+the shell, but are only generally useful to system administrators. This
+should normally be @file{/usr/local/sbin}, but write it as
+@file{$(exec_prefix)/sbin}.
+(If you are using Autoconf, write it as @samp{@@sbindir@@}.)
+
+@item libexecdir
+@comment This paragraph adjusted to avoid overfull hbox --roland 5jul94
+The directory for installing executable programs to be run by other
+programs rather than by users. This directory should normally be
+@file{/usr/local/libexec}, but write it as @file{$(exec_prefix)/libexec}.
+(If you are using Autoconf, write it as @samp{@@libexecdir@@}.)
+@end table
+
+Data files used by the program during its execution are divided into
+categories in two ways.
+
+@itemize @bullet
+@item
+Some files are normally modified by programs; others are never normally
+modified (though users may edit some of these).
+
+@item
+Some files are architecture-independent and can be shared by all
+machines at a site; some are architecture-dependent and can be shared
+only by machines of the same kind and operating system; others may never
+be shared between two machines.
+@end itemize
+
+This makes for six different possibilities. However, we want to
+discourage the use of architecture-dependent files, aside from object
+files and libraries. It is much cleaner to make other data files
+architecture-independent, and it is generally not hard.
+
+Therefore, here are the variables Makefiles should use to specify
+directories:
+
+@table @samp
+@item datadir
+The directory for installing read-only architecture independent data
+files. This should normally be @file{/usr/local/share}, but write it as
+@file{$(prefix)/share}.
+(If you are using Autoconf, write it as @samp{@@datadir@@}.)
+As a special exception, see @file{$(infodir)}
+and @file{$(includedir)} below.
+
+@item sysconfdir
+The directory for installing read-only data files that pertain to a
+single machine--that is to say, files for configuring a host. Mailer
+and network configuration files, @file{/etc/passwd}, and so forth belong
+here. All the files in this directory should be ordinary ASCII text
+files. This directory should normally be @file{/usr/local/etc}, but
+write it as @file{$(prefix)/etc}.
+(If you are using Autoconf, write it as @samp{@@sysconfdir@@}.)
+
+Do not install executables here in this directory (they probably belong
+in @file{$(libexecdir)} or @file{$(sbindir)}). Also do not install
+files that are modified in the normal course of their use (programs
+whose purpose is to change the configuration of the system excluded).
+Those probably belong in @file{$(localstatedir)}.
+
+@item sharedstatedir
+The directory for installing architecture-independent data files which
+the programs modify while they run. This should normally be
+@file{/usr/local/com}, but write it as @file{$(prefix)/com}.
+(If you are using Autoconf, write it as @samp{@@sharedstatedir@@}.)
+
+@item localstatedir
+The directory for installing data files which the programs modify while
+they run, and that pertain to one specific machine. Users should never
+need to modify files in this directory to configure the package's
+operation; put such configuration information in separate files that go
+in @file{$(datadir)} or @file{$(sysconfdir)}. @file{$(localstatedir)}
+should normally be @file{/usr/local/var}, but write it as
+@file{$(prefix)/var}.
+(If you are using Autoconf, write it as @samp{@@localstatedir@@}.)
+
+@item libdir
+The directory for object files and libraries of object code. Do not
+install executables here, they probably ought to go in @file{$(libexecdir)}
+instead. The value of @code{libdir} should normally be
+@file{/usr/local/lib}, but write it as @file{$(exec_prefix)/lib}.
+(If you are using Autoconf, write it as @samp{@@libdir@@}.)
+
+@item infodir
+The directory for installing the Info files for this package. By
+default, it should be @file{/usr/local/info}, but it should be written
+as @file{$(prefix)/info}.
+(If you are using Autoconf, write it as @samp{@@infodir@@}.)
+
+@item lispdir
+The directory for installing any Emacs Lisp files in this package. By
+default, it should be @file{/usr/local/share/emacs/site-lisp}, but it
+should be written as @file{$(prefix)/share/emacs/site-lisp}.
+
+If you are using Autoconf, write the default as @samp{@@lispdir@@}.
+In order to make @samp{@@lispdir@@} work, you need the following lines
+in your @file{configure.in} file:
+
+@example
+lispdir='$@{datadir@}/emacs/site-lisp'
+AC_SUBST(lispdir)
+@end example
+
+@item includedir
+@c rewritten to avoid overfull hbox --roland
+The directory for installing header files to be included by user
+programs with the C @samp{#include} preprocessor directive. This
+should normally be @file{/usr/local/include}, but write it as
+@file{$(prefix)/include}.
+(If you are using Autoconf, write it as @samp{@@includedir@@}.)
+
+Most compilers other than GCC do not look for header files in directory
+@file{/usr/local/include}. So installing the header files this way is
+only useful with GCC. Sometimes this is not a problem because some
+libraries are only really intended to work with GCC. But some libraries
+are intended to work with other compilers. They should install their
+header files in two places, one specified by @code{includedir} and one
+specified by @code{oldincludedir}.
+
+@item oldincludedir
+The directory for installing @samp{#include} header files for use with
+compilers other than GCC. This should normally be @file{/usr/include}.
+(If you are using Autoconf, you can write it as @samp{@@oldincludedir@@}.)
+
+The Makefile commands should check whether the value of
+@code{oldincludedir} is empty. If it is, they should not try to use
+it; they should cancel the second installation of the header files.
+
+A package should not replace an existing header in this directory unless
+the header came from the same package. Thus, if your Foo package
+provides a header file @file{foo.h}, then it should install the header
+file in the @code{oldincludedir} directory if either (1) there is no
+@file{foo.h} there or (2) the @file{foo.h} that exists came from the Foo
+package.
+
+To tell whether @file{foo.h} came from the Foo package, put a magic
+string in the file---part of a comment---and @code{grep} for that string.
+@end table
+
+Unix-style man pages are installed in one of the following:
+
+@table @samp
+@item mandir
+The top-level directory for installing the man pages (if any) for this
+package. It will normally be @file{/usr/local/man}, but you should
+write it as @file{$(prefix)/man}.
+(If you are using Autoconf, write it as @samp{@@mandir@@}.)
+
+@item man1dir
+The directory for installing section 1 man pages. Write it as
+@file{$(mandir)/man1}.
+@item man2dir
+The directory for installing section 2 man pages. Write it as
+@file{$(mandir)/man2}
+@item @dots{}
+
+@strong{Don't make the primary documentation for any GNU software be a
+man page. Write a manual in Texinfo instead. Man pages are just for
+the sake of people running GNU software on Unix, which is a secondary
+application only.}
+
+@item manext
+The file name extension for the installed man page. This should contain
+a period followed by the appropriate digit; it should normally be @samp{.1}.
+
+@item man1ext
+The file name extension for installed section 1 man pages.
+@item man2ext
+The file name extension for installed section 2 man pages.
+@item @dots{}
+Use these names instead of @samp{manext} if the package needs to install man
+pages in more than one section of the manual.
+@end table
+
+And finally, you should set the following variable:
+
+@table @samp
+@item srcdir
+The directory for the sources being compiled. The value of this
+variable is normally inserted by the @code{configure} shell script.
+(If you are using Autconf, use @samp{srcdir = @@srcdir@@}.)
+@end table
+
+For example:
+
+@smallexample
+@c I have changed some of the comments here slightly to fix an overfull
+@c hbox, so the make manual can format correctly. --roland
+# Common prefix for installation directories.
+# NOTE: This directory must exist when you start the install.
+prefix = /usr/local
+exec_prefix = $(prefix)
+# Where to put the executable for the command `gcc'.
+bindir = $(exec_prefix)/bin
+# Where to put the directories used by the compiler.
+libexecdir = $(exec_prefix)/libexec
+# Where to put the Info files.
+infodir = $(prefix)/info
+@end smallexample
+
+If your program installs a large number of files into one of the
+standard user-specified directories, it might be useful to group them
+into a subdirectory particular to that program. If you do this, you
+should write the @code{install} rule to create these subdirectories.
+
+Do not expect the user to include the subdirectory name in the value of
+any of the variables listed above. The idea of having a uniform set of
+variable names for installation directories is to enable the user to
+specify the exact same values for several different GNU packages. In
+order for this to be useful, all the packages must be designed so that
+they will work sensibly when the user does so.
+
+@node Standard Targets
+@section Standard Targets for Users
+
+All GNU programs should have the following targets in their Makefiles:
+
+@table @samp
+@item all
+Compile the entire program. This should be the default target. This
+target need not rebuild any documentation files; Info files should
+normally be included in the distribution, and DVI files should be made
+only when explicitly asked for.
+
+By default, the Make rules should compile and link with @samp{-g}, so
+that executable programs have debugging symbols. Users who don't mind
+being helpless can strip the executables later if they wish.
+
+@item install
+Compile the program and copy the executables, libraries, and so on to
+the file names where they should reside for actual use. If there is a
+simple test to verify that a program is properly installed, this target
+should run that test.
+
+Do not strip executables when installing them. Devil-may-care users can
+use the @code{install-strip} target to do that.
+
+If possible, write the @code{install} target rule so that it does not
+modify anything in the directory where the program was built, provided
+@samp{make all} has just been done. This is convenient for building the
+program under one user name and installing it under another.
+
+The commands should create all the directories in which files are to be
+installed, if they don't already exist. This includes the directories
+specified as the values of the variables @code{prefix} and
+@code{exec_prefix}, as well as all subdirectories that are needed.
+One way to do this is by means of an @code{installdirs} target
+as described below.
+
+Use @samp{-} before any command for installing a man page, so that
+@code{make} will ignore any errors. This is in case there are systems
+that don't have the Unix man page documentation system installed.
+
+The way to install Info files is to copy them into @file{$(infodir)}
+with @code{$(INSTALL_DATA)} (@pxref{Command Variables}), and then run
+the @code{install-info} program if it is present. @code{install-info}
+is a program that edits the Info @file{dir} file to add or update the
+menu entry for the given Info file; it is part of the Texinfo package.
+Here is a sample rule to install an Info file:
+
+@comment This example has been carefully formatted for the Make manual.
+@comment Please do not reformat it without talking to roland@gnu.ai.mit.edu.
+@smallexample
+$(DESTDIR)$(infodir)/foo.info: foo.info
+ $(POST_INSTALL)
+# There may be a newer info file in . than in srcdir.
+ -if test -f foo.info; then d=.; \
+ else d=$(srcdir); fi; \
+ $(INSTALL_DATA) $$d/foo.info $(DESTDIR)$@@; \
+# Run install-info only if it exists.
+# Use `if' instead of just prepending `-' to the
+# line so we notice real errors from install-info.
+# We use `$(SHELL) -c' because some shells do not
+# fail gracefully when there is an unknown command.
+ if $(SHELL) -c 'install-info --version' \
+ >/dev/null 2>&1; then \
+ install-info --dir-file=$(DESTDIR)$(infodir)/dir \
+ $(DESTDIR)$(infodir)/foo.info; \
+ else true; fi
+@end smallexample
+
+When writing the @code{install} target, you must classify all the
+commands into three categories: normal ones, @dfn{pre-installation}
+commands and @dfn{post-installation} commands. @xref{Install Command
+Categories}.
+
+@item uninstall
+Delete all the installed files---the copies that the @samp{install}
+target creates.
+
+This rule should not modify the directories where compilation is done,
+only the directories where files are installed.
+
+The uninstallation commands are divided into three categories, just like
+the installation commands. @xref{Install Command Categories}.
+
+@item install-strip
+Like @code{install}, but strip the executable files while installing
+them. In many cases, the definition of this target can be very simple:
+
+@smallexample
+install-strip:
+ $(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' \
+ install
+@end smallexample
+
+Normally we do not recommend stripping an executable unless you are sure
+the program has no bugs. However, it can be reasonable to install a
+stripped executable for actual execution while saving the unstripped
+executable elsewhere in case there is a bug.
+
+@comment The gratuitous blank line here is to make the table look better
+@comment in the printed Make manual. Please leave it in.
+@item clean
+
+Delete all files from the current directory that are normally created by
+building the program. Don't delete the files that record the
+configuration. Also preserve files that could be made by building, but
+normally aren't because the distribution comes with them.
+
+Delete @file{.dvi} files here if they are not part of the distribution.
+
+@item distclean
+Delete all files from the current directory that are created by
+configuring or building the program. If you have unpacked the source
+and built the program without creating any other files, @samp{make
+distclean} should leave only the files that were in the distribution.
+
+@item mostlyclean
+Like @samp{clean}, but may refrain from deleting a few files that people
+normally don't want to recompile. For example, the @samp{mostlyclean}
+target for GCC does not delete @file{libgcc.a}, because recompiling it
+is rarely necessary and takes a lot of time.
+
+@item maintainer-clean
+Delete almost everything from the current directory that can be
+reconstructed with this Makefile. This typically includes everything
+deleted by @code{distclean}, plus more: C source files produced by
+Bison, tags tables, Info files, and so on.
+
+The reason we say ``almost everything'' is that running the command
+@samp{make maintainer-clean} should not delete @file{configure} even if
+@file{configure} can be remade using a rule in the Makefile. More generally,
+@samp{make maintainer-clean} should not delete anything that needs to
+exist in order to run @file{configure} and then begin to build the
+program. This is the only exception; @code{maintainer-clean} should
+delete everything else that can be rebuilt.
+
+The @samp{maintainer-clean} target is intended to be used by a maintainer of
+the package, not by ordinary users. You may need special tools to
+reconstruct some of the files that @samp{make maintainer-clean} deletes.
+Since these files are normally included in the distribution, we don't
+take care to make them easy to reconstruct. If you find you need to
+unpack the full distribution again, don't blame us.
+
+To help make users aware of this, the commands for the special
+@code{maintainer-clean} target should start with these two:
+
+@smallexample
+@@echo 'This command is intended for maintainers to use; it'
+@@echo 'deletes files that may need special tools to rebuild.'
+@end smallexample
+
+@item TAGS
+Update a tags table for this program.
+@c ADR: how?
+
+@item info
+Generate any Info files needed. The best way to write the rules is as
+follows:
+
+@smallexample
+info: foo.info
+
+foo.info: foo.texi chap1.texi chap2.texi
+ $(MAKEINFO) $(srcdir)/foo.texi
+@end smallexample
+
+@noindent
+You must define the variable @code{MAKEINFO} in the Makefile. It should
+run the @code{makeinfo} program, which is part of the Texinfo
+distribution.
+
+Normally a GNU distribution comes with Info files, and that means the
+Info files are present in the source directory. Therefore, the Make
+rule for an info file should update it in the source directory. When
+users build the package, ordinarily Make will not update the Info files
+because they will already be up to date.
+
+@item dvi
+Generate DVI files for all Texinfo documentation.
+For example:
+
+@smallexample
+dvi: foo.dvi
+
+foo.dvi: foo.texi chap1.texi chap2.texi
+ $(TEXI2DVI) $(srcdir)/foo.texi
+@end smallexample
+
+@noindent
+You must define the variable @code{TEXI2DVI} in the Makefile. It should
+run the program @code{texi2dvi}, which is part of the Texinfo
+distribution.@footnote{@code{texi2dvi} uses @TeX{} to do the real work
+of formatting. @TeX{} is not distributed with Texinfo.} Alternatively,
+write just the dependencies, and allow GNU @code{make} to provide the command.
+
+@item dist
+Create a distribution tar file for this program. The tar file should be
+set up so that the file names in the tar file start with a subdirectory
+name which is the name of the package it is a distribution for. This
+name can include the version number.
+
+For example, the distribution tar file of GCC version 1.40 unpacks into
+a subdirectory named @file{gcc-1.40}.
+
+The easiest way to do this is to create a subdirectory appropriately
+named, use @code{ln} or @code{cp} to install the proper files in it, and
+then @code{tar} that subdirectory.
+
+Compress the tar file file with @code{gzip}. For example, the actual
+distribution file for GCC version 1.40 is called @file{gcc-1.40.tar.gz}.
+
+The @code{dist} target should explicitly depend on all non-source files
+that are in the distribution, to make sure they are up to date in the
+distribution.
+@ifset CODESTD
+@xref{Releases, , Making Releases}.
+@end ifset
+@ifclear CODESTD
+@xref{Releases, , Making Releases, standards, GNU Coding Standards}.
+@end ifclear
+
+@item check
+Perform self-tests (if any). The user must build the program before
+running the tests, but need not install the program; you should write
+the self-tests so that they work when the program is built but not
+installed.
+@end table
+
+The following targets are suggested as conventional names, for programs
+in which they are useful.
+
+@table @code
+@item installcheck
+Perform installation tests (if any). The user must build and install
+the program before running the tests. You should not assume that
+@file{$(bindir)} is in the search path.
+
+@item installdirs
+It's useful to add a target named @samp{installdirs} to create the
+directories where files are installed, and their parent directories.
+There is a script called @file{mkinstalldirs} which is convenient for
+this; you can find it in the Texinfo package.
+@c It's in /gd/gnu/lib/mkinstalldirs.
+You can use a rule like this:
+
+@comment This has been carefully formatted to look decent in the Make manual.
+@comment Please be sure not to make it extend any further to the right.--roland
+@smallexample
+# Make sure all installation directories (e.g. $(bindir))
+# actually exist by making them if necessary.
+installdirs: mkinstalldirs
+ $(srcdir)/mkinstalldirs $(bindir) $(datadir) \
+ $(libdir) $(infodir) \
+ $(mandir)
+@end smallexample
+
+This rule should not modify the directories where compilation is done.
+It should do nothing but create installation directories.
+@end table
+
+@node Install Command Categories
+@section Install Command Categories
+
+@cindex pre-installation commands
+@cindex post-installation commands
+When writing the @code{install} target, you must classify all the
+commands into three categories: normal ones, @dfn{pre-installation}
+commands and @dfn{post-installation} commands.
+
+Normal commands move files into their proper places, and set their
+modes. They may not alter any files except the ones that come entirely
+from the package they belong to.
+
+Pre-installation and post-installation commands may alter other files;
+in particular, they can edit global configuration files or data bases.
+
+Pre-installation commands are typically executed before the normal
+commands, and post-installation commands are typically run after the
+normal commands.
+
+The most common use for a post-installation command is to run
+@code{install-info}. This cannot be done with a normal command, since
+it alters a file (the Info directory) which does not come entirely and
+solely from the package being installed. It is a post-installation
+command because it needs to be done after the normal command which
+installs the package's Info files.
+
+Most programs don't need any pre-installation commands, but we have the
+feature just in case it is needed.
+
+To classify the commands in the @code{install} rule into these three
+categories, insert @dfn{category lines} among them. A category line
+specifies the category for the commands that follow.
+
+A category line consists of a tab and a reference to a special Make
+variable, plus an optional comment at the end. There are three
+variables you can use, one for each category; the variable name
+specifies the category. Category lines are no-ops in ordinary execution
+because these three Make variables are normally undefined (and you
+@emph{should not} define them in the makefile).
+
+Here are the three possible category lines, each with a comment that
+explains what it means:
+
+@smallexample
+ $(PRE_INSTALL) # @r{Pre-install commands follow.}
+ $(POST_INSTALL) # @r{Post-install commands follow.}
+ $(NORMAL_INSTALL) # @r{Normal commands follow.}
+@end smallexample
+
+If you don't use a category line at the beginning of the @code{install}
+rule, all the commands are classified as normal until the first category
+line. If you don't use any category lines, all the commands are
+classified as normal.
+
+These are the category lines for @code{uninstall}:
+
+@smallexample
+ $(PRE_UNINSTALL) # @r{Pre-uninstall commands follow.}
+ $(POST_UNINSTALL) # @r{Post-uninstall commands follow.}
+ $(NORMAL_UNINSTALL) # @r{Normal commands follow.}
+@end smallexample
+
+Typically, a pre-uninstall command would be used for deleting entries
+from the Info directory.
+
+If the @code{install} or @code{uninstall} target has any dependencies
+which act as subroutines of installation, then you should start
+@emph{each} dependency's commands with a category line, and start the
+main target's commands with a category line also. This way, you can
+ensure that each command is placed in the right category regardless of
+which of the dependencies actually run.
+
+Pre-installation and post-installation commands should not run any
+programs except for these:
+
+@example
+[ basename bash cat chgrp chmod chown cmp cp dd diff echo
+egrep expand expr false fgrep find getopt grep gunzip gzip
+hostname install install-info kill ldconfig ln ls md5sum
+mkdir mkfifo mknod mv printenv pwd rm rmdir sed sort tee
+test touch true uname xargs yes
+@end example
+
+@cindex binary packages
+The reason for distinguishing the commands in this way is for the sake
+of making binary packages. Typically a binary package contains all the
+executables and other files that need to be installed, and has its own
+method of installing them---so it does not need to run the normal
+installation commands. But installing the binary package does need to
+execute the pre-installation and post-installation commands.
+
+Programs to build binary packages work by extracting the
+pre-installation and post-installation commands. Here is one way of
+extracting the pre-installation commands:
+
+@smallexample
+make -n install -o all \
+ PRE_INSTALL=pre-install \
+ POST_INSTALL=post-install \
+ NORMAL_INSTALL=normal-install \
+ | gawk -f pre-install.awk
+@end smallexample
+
+@noindent
+where the file @file{pre-install.awk} could contain this:
+
+@smallexample
+$0 ~ /^\t[ \t]*(normal_install|post_install)[ \t]*$/ @{on = 0@}
+on @{print $0@}
+$0 ~ /^\t[ \t]*pre_install[ \t]*$/ @{on = 1@}
+@end smallexample
+
+The resulting file of pre-installation commands is executed as a shell
+script as part of installing the binary package.