include/elf:

	* arm.h: Import complete list of official relocation names
	and numbers from AAELF.  Define FAKE_RELOCs for old names.
	Remove a few old names no longer used anywhere.

bfd:
	* elf32-arm.c: Wherever possible, use official reloc names
	from AAELF.
	(elf32_arm_howto_table, elf32_arm_tls_gd32_howto)
	(elf32_arm_tls_ldo32_howto, elf32_arm_tls_ldm32_howto)
	(elf32_arm_tls_le32_howto, elf32_arm_tls_ie32_howto)
	(elf32_arm_vtinherit_howto, elf32_arm_vtentry_howto)
	(elf32_arm_pc11_howto, elf32_arm_thm_pc9_howto, elf32_arm_got_prel)
	(elf32_arm_r_howto): Replace with elf32_arm_howto_table_1,
	elf32_arm_howto_table_2, and elf32_arm_howto_table_3.
	Add many new relocations from AAELF.
	(elf32_arm_howto_from_type): Update to match.
	(elf32_arm_reloc_map): Add entries for R_ARM_THM_JUMP24,
	R_ARM_THM_JUMP11, R_ARM_THM_JUMP19, R_ARM_THM_JUMP8,
	R_ARM_THM_JUMP6, R_ARM_GNU_VTINHERIT, and R_ARM_GNU_VTENTRY.
	(elf32_arm_reloc_type_lookup): Use elf32_arm_howto_from_type.
	(elf32_arm_final_link_relocate): Add support for
	R_ARM_THM_JUMP24, R_ARM_THM_JUMP19, R_ARM_THM_JUMP6.  Remove
	case entries redundant with default.

	* reloc.c: Reorganize ARM relocations.  Add Thumb
	assembler-internal relocations BFD_RELOC_ARM_T32_OFFSET_U8,
	BFD_RELOC_ARM_T32_OFFSET_IMM, BFD_RELOC_ARM_T32_IMMEDIATE.
	Add visible relocations BFD_RELOC_THUMB_PCREL_BRANCH7,
	BFD_RELOC_THUMB_BRANCH20, BFD_RELOC_THUMB_BRANCH25.
	Delete unused relocations BFD_RELOC_ARM_GOT12, BFD_RELOC_ARM_COPY.
	* bfd-in2.h, libbfd.h: Regenerate.

opcodes:
	* arm-dis.c (thumb_opcodes): Add disassembly for V6T2 16-bit
	instructions.  Adjust disassembly of some opcodes to match
	unified syntax.
	(thumb32_opcodes): New table.
	(print_insn_thumb): Rename print_insn_thumb16; don't handle
	two-halfword branches here.
	(print_insn_thumb32): New function.
	(print_insn): Choose among print_insn_arm, print_insn_thumb16,
	and print_insn_thumb32.  Be consistent about order of
	halfwords when printing 32-bit instructions.

gas:
	* hash.c (hash_lookup): Add len parameter.  All callers changed.
	(hash_find_n): New interface.
	* hash.h: Prototype hash_find_n.
	* sb.c: Include as.h.
	(scrub_from_sb, sb_to_scrub, scrub_position): New statics.
	(sb_scrub_and_add_sb): New interface.
	* sb.h: Prototype sb_scrub_and_add_sb.
	* input-scrub.c (input_scrub_include_sb): Use sb_scrub_and_add_sb.

	* config/tc-arm.h (TC_FORCE_RELOCATION_LOCAL): Remove
	reference to BFD_RELOC_ARM_GOT12 which is never generated.
	* config/tc-arm.c: Rewrite, adding Thumb-2 support.

gas/testsuite:
	* gas/arm/arm.exp: Convert all existing "gas_test" tests to
	"run_dump_test" tests.  Run more tests unconditionally.  Run new tests.
	* gas/arm/arch4t.s, gas/arm/arch6zk.s, gas/arm/arm3.s, gas/arm/arm6.s
	* gas/arm/arm7dm.s, gas/arm/bignum1.s, gas/arm/float.s
	* gas/arm/immed.s, gas/arm/iwmmxt.s, gas/arm/offset.s, gas/arm/thumb.s:
	Adjust to work as a dump test.
	* gas/arm/arch4t.d, gas/arm/arch6zk.d, gas/arm/arm3.d, gas/arm/arm6.d
	* gas/arm/arm7dm.d, gas/arm/bignum1.d, gas/arm/float.d
	* gas/arm/immed.d, gas/arm/iwmmxt.d, gas/arm/offset.d, gas/arm/thumb.d:
	New files.

	* gas/arm/armv1-bad.l, gas/arm/armv1-bad.s: Remove tests for
	diagnostics that don't happen in the first pass anymore.

	* gas/arm/iwmmxt-bad.l, gas/arm/r15-bad.l, gas/arm/req.l
	* gas/arm/vfp-bad.l:
	Update expected diagnostics.
	* gas/arm/pic.d: Update expected reloc name.
	* gas/arm/thumbv6.d: CPY no longer appears in disassembly.
	* gas/arm/r15-bad.s: Avoid two-argument mul.
	* gas/arm/req.s: Adjust comments.
	* gas/arm/maverick.d, gas/arm/maverick.s: Avoid inappropriate
	use of PC.

	* gas/arm/macro-1.d, gas/arm/macro1.s
	* gas/arm/t16-bad.l, gas/arm/t16-bad.s
	* gas/arm/tcompat.d, gas/arm/tcompat.s
	* gas/arm/tcompat2.d, gas/arm/tcompat2.s
	* gas/arm/thumb32.d, gas/arm/thumb32.s
	New test pair.

ld/testsuite:
	* ld-arm/mixed-app.d: Adjust expected disassembly a little.

1 files changed, 94 insertions, 69 deletions

diff --git a/bfd/reloc.c b/bfd/reloc.c
index e2e8a52..078529d 100644
--- a/bfd/reloc.c
+++ b/bfd/reloc.c
@@ -2635,104 +2635,139 @@ ENUMDOC
   Thumb 22 bit pc-relative branch.  The lowest bit must be zero and is
   not stored in the instruction.  The 2nd lowest bit comes from a 1 bit
   field in the instruction.
+
 ENUM
-  BFD_RELOC_ARM_IMMEDIATE
+  BFD_RELOC_THUMB_PCREL_BRANCH7
 ENUMX
-  BFD_RELOC_ARM_ADRL_IMMEDIATE
+  BFD_RELOC_THUMB_PCREL_BRANCH9
 ENUMX
-  BFD_RELOC_ARM_OFFSET_IMM
+  BFD_RELOC_THUMB_PCREL_BRANCH12
 ENUMX
-  BFD_RELOC_ARM_SHIFT_IMM
+  BFD_RELOC_THUMB_PCREL_BRANCH20
 ENUMX
-  BFD_RELOC_ARM_SMI
+  BFD_RELOC_THUMB_PCREL_BRANCH23
 ENUMX
-  BFD_RELOC_ARM_SWI
+  BFD_RELOC_THUMB_PCREL_BRANCH25
+ENUMDOC
+  Thumb 7-, 9-, 12-, 20-, 23-, and 25-bit pc-relative branches.
+  The lowest bit must be zero and is not stored in the instruction.
+  Note that the corresponding ELF R_ARM_THM_JUMPnn constant has an
+  "nn" one smaller in all cases.  Note further that BRANCH23
+  corresponds to R_ARM_THM_CALL.
+
+ENUM
+  BFD_RELOC_ARM_OFFSET_IMM
+ENUMDOC
+  12-bit immediate offset, used in ARM-format ldr and str instructions.
+
+ENUM
+  BFD_RELOC_ARM_THUMB_OFFSET
+ENUMDOC
+  5-bit immediate offset, used in Thumb-format ldr and str instructions.
+
+ENUM
+  BFD_RELOC_ARM_TARGET1
+ENUMDOC
+  Pc-relative or absolute relocation depending on target.  Used for
+  entries in .init_array sections.
+ENUM
+  BFD_RELOC_ARM_ROSEGREL32
+ENUMDOC
+  Read-only segment base relative address.
+ENUM
+  BFD_RELOC_ARM_SBREL32
+ENUMDOC
+  Data segment base relative address.
+ENUM
+  BFD_RELOC_ARM_TARGET2
+ENUMDOC
+  This reloc is used for references to RTTI data from exception handling
+  tables.  The actual definition depends on the target.  It may be a
+  pc-relative or some form of GOT-indirect relocation.
+ENUM
+  BFD_RELOC_ARM_PREL31
+ENUMDOC
+  31-bit PC relative address.
+
+ENUM
+  BFD_RELOC_ARM_JUMP_SLOT
 ENUMX
-  BFD_RELOC_ARM_MULTI
+  BFD_RELOC_ARM_GLOB_DAT
 ENUMX
-  BFD_RELOC_ARM_CP_OFF_IMM
+  BFD_RELOC_ARM_GOT32
 ENUMX
-  BFD_RELOC_ARM_CP_OFF_IMM_S2
+  BFD_RELOC_ARM_PLT32
 ENUMX
-  BFD_RELOC_ARM_ADR_IMM
+  BFD_RELOC_ARM_RELATIVE
 ENUMX
-  BFD_RELOC_ARM_LDR_IMM
+  BFD_RELOC_ARM_GOTOFF
 ENUMX
-  BFD_RELOC_ARM_LITERAL
+  BFD_RELOC_ARM_GOTPC
+ENUMDOC
+  Relocations for setting up GOTs and PLTs for shared libraries.
+
+ENUM
+  BFD_RELOC_ARM_TLS_GD32
 ENUMX
-  BFD_RELOC_ARM_IN_POOL
+  BFD_RELOC_ARM_TLS_LDO32
 ENUMX
-  BFD_RELOC_ARM_OFFSET_IMM8
+  BFD_RELOC_ARM_TLS_LDM32
 ENUMX
-  BFD_RELOC_ARM_HWLITERAL
+  BFD_RELOC_ARM_TLS_DTPOFF32
 ENUMX
-  BFD_RELOC_ARM_THUMB_ADD
+  BFD_RELOC_ARM_TLS_DTPMOD32
 ENUMX
-  BFD_RELOC_ARM_THUMB_IMM
+  BFD_RELOC_ARM_TLS_TPOFF32
 ENUMX
-  BFD_RELOC_ARM_THUMB_SHIFT
+  BFD_RELOC_ARM_TLS_IE32
 ENUMX
-  BFD_RELOC_ARM_THUMB_OFFSET
+  BFD_RELOC_ARM_TLS_LE32
+ENUMDOC
+  ARM thread-local storage relocations.
+
+ENUM
+  BFD_RELOC_ARM_IMMEDIATE
 ENUMX
-  BFD_RELOC_ARM_GOT12
+  BFD_RELOC_ARM_ADRL_IMMEDIATE
 ENUMX
-  BFD_RELOC_ARM_GOT32
+  BFD_RELOC_ARM_T32_IMMEDIATE
 ENUMX
-  BFD_RELOC_ARM_JUMP_SLOT
+  BFD_RELOC_ARM_SHIFT_IMM
 ENUMX
-  BFD_RELOC_ARM_COPY
+  BFD_RELOC_ARM_SMI
 ENUMX
-  BFD_RELOC_ARM_GLOB_DAT
+  BFD_RELOC_ARM_SWI
 ENUMX
-  BFD_RELOC_ARM_PLT32
+  BFD_RELOC_ARM_MULTI
 ENUMX
-  BFD_RELOC_ARM_RELATIVE
+  BFD_RELOC_ARM_CP_OFF_IMM
 ENUMX
-  BFD_RELOC_ARM_GOTOFF
+  BFD_RELOC_ARM_CP_OFF_IMM_S2
 ENUMX
-  BFD_RELOC_ARM_GOTPC
+  BFD_RELOC_ARM_ADR_IMM
 ENUMX
-  BFD_RELOC_ARM_TLS_GD32
+  BFD_RELOC_ARM_LDR_IMM
 ENUMX
-  BFD_RELOC_ARM_TLS_LDO32
+  BFD_RELOC_ARM_LITERAL
 ENUMX
-  BFD_RELOC_ARM_TLS_LDM32
+  BFD_RELOC_ARM_IN_POOL
 ENUMX
-  BFD_RELOC_ARM_TLS_DTPOFF32
+  BFD_RELOC_ARM_OFFSET_IMM8
 ENUMX
-  BFD_RELOC_ARM_TLS_DTPMOD32
+  BFD_RELOC_ARM_T32_OFFSET_U8
 ENUMX
-  BFD_RELOC_ARM_TLS_TPOFF32
+  BFD_RELOC_ARM_T32_OFFSET_IMM
 ENUMX
-  BFD_RELOC_ARM_TLS_IE32
+  BFD_RELOC_ARM_HWLITERAL
 ENUMX
-  BFD_RELOC_ARM_TLS_LE32
+  BFD_RELOC_ARM_THUMB_ADD
+ENUMX
+  BFD_RELOC_ARM_THUMB_IMM
+ENUMX
+  BFD_RELOC_ARM_THUMB_SHIFT
 ENUMDOC
   These relocs are only used within the ARM assembler.  They are not
   (at present) written to any object files.
-ENUM
-  BFD_RELOC_ARM_TARGET1
-ENUMDOC
-  Pc-relative or absolute relocation depending on target.  Used for
-  entries in .init_array sections.
-ENUM
-  BFD_RELOC_ARM_ROSEGREL32
-ENUMDOC
-  Read-only segment base relative address.
-ENUM
-  BFD_RELOC_ARM_SBREL32
-ENUMDOC
-  Data segment base relative address.
-ENUM
-  BFD_RELOC_ARM_TARGET2
-ENUMDOC
-  This reloc is used for References to RTTI dta from exception handling
-  tables.  The actual definition depends on the target.  It may be a
-  pc-relative or some form of GOT-indirect relocation.
-ENUM
-  BFD_RELOC_ARM_PREL31
-ENUMDOC
-  31-bit PC relative address.
 
 ENUM
   BFD_RELOC_SH_PCDISP8BY2
@@ -2918,16 +2953,6 @@ ENUMDOC
   Renesas / SuperH SH relocs.  Not all of these appear in object files.
 
 ENUM
-  BFD_RELOC_THUMB_PCREL_BRANCH9
-ENUMX
-  BFD_RELOC_THUMB_PCREL_BRANCH12
-ENUMX
-  BFD_RELOC_THUMB_PCREL_BRANCH23
-ENUMDOC
-  Thumb 23-, 12- and 9-bit pc-relative branches.  The lowest bit must
-  be zero and is not stored in the instruction.
-
-ENUM
   BFD_RELOC_ARC_B22_PCREL
 ENUMDOC
   ARC Cores relocs.