gdb/aarch64: Add record support for MOPS instructions.

There are two kinds of MOPS instructions: set instructions and copy
instructions.  Within each group there are variants with minor
differences in how they read or write to memory — e.g., non-temporal
read and/or write, unprivileged read and/or write and permutations of
those — but they work in the same way in terms of the registers and
regions of memory that they modify.

The new gdb.reverse/aarch64-mops.exp testcase verifies that MOPS
instructions are recorded and correctly reversed.  Not all variants of the
copy and set instructions are tested, since there are many and the record
and replay target processes them in the same way.

PR tdep/31666
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=31666
Approved-By: Luis Machado <luis.machado@arm.com>
Tested-By: Luis Machado <luis.machado@arm.com>

3 files changed, 333 insertions, 0 deletions

diff --git a/gdb/aarch64-tdep.c b/gdb/aarch64-tdep.c
index 05ecd42..e4bca6c 100644
--- a/gdb/aarch64-tdep.c
+++ b/gdb/aarch64-tdep.c
@@ -5188,6 +5188,71 @@ aarch64_record_asimd_load_store (aarch64_insn_decode_record *aarch64_insn_r)
   return AARCH64_RECORD_SUCCESS;
 }
 
+/* Record handler for Memory Copy and Memory Set instructions.  */
+
+static unsigned int
+aarch64_record_memcopy_memset (aarch64_insn_decode_record *aarch64_insn_r)
+{
+  if (record_debug)
+    debug_printf ("Process record: memory copy and memory set\n");
+
+  uint8_t op1 = bits (aarch64_insn_r->aarch64_insn, 22, 23);
+  uint8_t op2 = bits (aarch64_insn_r->aarch64_insn, 12, 15);
+  uint32_t reg_rd = bits (aarch64_insn_r->aarch64_insn, 0, 4);
+  uint32_t reg_rn = bits (aarch64_insn_r->aarch64_insn, 5, 9);
+  uint32_t record_buf[3];
+  uint64_t record_buf_mem[4];
+
+  if (op1 == 3 && op2 > 11)
+    /* Unallocated instructions.  */
+    return AARCH64_RECORD_UNKNOWN;
+
+  /* Set instructions have two registers and one memory region to be
+     recorded.  */
+  record_buf[0] = reg_rd;
+  record_buf[1] = reg_rn;
+  aarch64_insn_r->reg_rec_count = 2;
+
+  ULONGEST dest_addr;
+  regcache_raw_read_unsigned (aarch64_insn_r->regcache, reg_rd, &dest_addr);
+
+  LONGEST length;
+  regcache_raw_read_signed (aarch64_insn_r->regcache, reg_rn, &length);
+
+  /* In one of the algorithm options a processor can implement, the length
+     in Rn has an inverted sign.  */
+  if (length < 0)
+    length *= -1;
+
+  record_buf_mem[0] = length;
+  record_buf_mem[1] = dest_addr;
+  aarch64_insn_r->mem_rec_count = 1;
+
+  if (op1 != 3)
+    {
+      /* Copy instructions have an additional register and an additional
+	 memory region to be recorded.  */
+      uint32_t reg_rs = bits (aarch64_insn_r->aarch64_insn, 16, 20);
+
+      record_buf[2] = reg_rs;
+      aarch64_insn_r->reg_rec_count++;
+
+      ULONGEST source_addr;
+      regcache_raw_read_unsigned (aarch64_insn_r->regcache, reg_rs,
+				  &source_addr);
+
+      record_buf_mem[2] = length;
+      record_buf_mem[3] = source_addr;
+      aarch64_insn_r->mem_rec_count++;
+    }
+
+  MEM_ALLOC (aarch64_insn_r->aarch64_mems, aarch64_insn_r->mem_rec_count,
+	     record_buf_mem);
+  REG_ALLOC (aarch64_insn_r->aarch64_regs, aarch64_insn_r->reg_rec_count,
+	     record_buf);
+  return AARCH64_RECORD_SUCCESS;
+}
+
 /* Record handler for load and store instructions.  */
 
 static unsigned int
@@ -5465,6 +5530,10 @@ aarch64_record_load_store (aarch64_insn_decode_record *aarch64_insn_r)
       if (insn_bits10_11 == 0x01 || insn_bits10_11 == 0x03)
 	record_buf[aarch64_insn_r->reg_rec_count++] = reg_rn;
     }
+  /* Memory Copy and Memory Set instructions.  */
+  else if ((insn_bits24_27 & 1) == 1 && insn_bits28_29 == 1
+	   && insn_bits10_11 == 1 && !insn_bit21)
+    return aarch64_record_memcopy_memset (aarch64_insn_r);
   /* Advanced SIMD load/store instructions.  */
   else
     return aarch64_record_asimd_load_store (aarch64_insn_r);
diff --git a/gdb/testsuite/gdb.reverse/aarch64-mops.c b/gdb/testsuite/gdb.reverse/aarch64-mops.c
new file mode 100644
index 0000000..95318fe
--- /dev/null
+++ b/gdb/testsuite/gdb.reverse/aarch64-mops.c
@@ -0,0 +1,78 @@
+/* This test program is part of GDB, the GNU debugger.
+
+   Copyright 2024 Free Software Foundation, Inc.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 3 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#include <string.h>
+
+#define INITIAL_STRING "Initial fill value."
+#define NEW_STRING "Just a test string."
+#define BUF_SIZE sizeof(NEW_STRING)
+
+int
+main (void)
+{
+  char dest[BUF_SIZE] = INITIAL_STRING;
+  char source[BUF_SIZE] = NEW_STRING;
+  register char *p asm ("x19");
+  register char *q asm ("x20");
+  register long size asm ("x21");
+  register long zero asm ("x22");
+
+  p = dest;
+  size = BUF_SIZE;
+  zero = 0;
+  /* Before setp.  */
+  /* memset implemented in MOPS instructions.  */
+  __asm__ volatile ("setp [%0]!, %1!, %2\n\t"
+		    "setm [%0]!, %1!, %2\n\t"
+		    "sete [%0]!, %1!, %2\n\t"
+		    : "+&r"(p), "+&r"(size)
+		    : "r"(zero)
+		    : "memory");
+
+  /* After sete.  */
+  p = dest;
+  q = source;
+  size = BUF_SIZE;
+  memcpy (dest, INITIAL_STRING, sizeof (dest));
+  /* Before cpyp.  */
+  /* memmove implemented in MOPS instructions.  */
+  __asm__ volatile ("cpyp   [%0]!, [%1]!, %2!\n\t"
+		    "cpym   [%0]!, [%1]!, %2!\n\t"
+		    "cpye   [%0]!, [%1]!, %2!\n\t"
+		    : "+&r" (p), "+&r" (q), "+&r" (size)
+		    :
+		    : "memory");
+
+  /* After cpye.  */
+  p = dest;
+  q = source;
+  size = BUF_SIZE;
+  memcpy (dest, INITIAL_STRING, sizeof (dest));
+  /* Before cpyfp.  */
+  /* memcpy implemented in MOPS instructions.  */
+  __asm__ volatile ("cpyfp   [%0]!, [%1]!, %2!\n\t"
+		    "cpyfm   [%0]!, [%1]!, %2!\n\t"
+		    "cpyfe   [%0]!, [%1]!, %2!\n\t"
+		    : "+&r" (p), "+&r" (q), "+&r" (size)
+		    :
+		    : "memory");
+
+  /* After cpyfe.  */
+  p = dest;
+
+  return 0;
+}
diff --git a/gdb/testsuite/gdb.reverse/aarch64-mops.exp b/gdb/testsuite/gdb.reverse/aarch64-mops.exp
new file mode 100644
index 0000000..05a991d
--- /dev/null
+++ b/gdb/testsuite/gdb.reverse/aarch64-mops.exp
@@ -0,0 +1,186 @@
+# Copyright 2024 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# Test instruction record for AArch64 FEAT_MOPS instructions.
+# Based on gdb.reverse/ppc_record_test_isa_3_1.exp
+#
+# The basic flow of the record tests are:
+#    1) Stop before executing the instructions of interest.  Record
+#       the initial value of the registers that the instruction will
+#       change, i.e. the destination register.
+#    2) Execute the instructions.  Record the new value of the
+#       registers that changed.
+#    3) Reverse the direction of the execution and execute back to
+#       just before the instructions of interest.  Record the final
+#       value of the registers of interest.
+#    4) Check that the initial and new values of the registers are
+#       different, i.e. the instruction changed the registers as expected.
+#    5) Check that the initial and final values of the registers are
+#       the same, i.e. GDB record restored the registers to their
+#       original values.
+
+require allow_aarch64_mops_tests
+
+standard_testfile
+
+if { [prepare_for_testing "failed to prepare" ${testfile} ${srcfile} \
+	  [list debug additional_flags=-march=armv9.3-a]] } {
+    return -1
+}
+
+if ![runto_main] {
+    return -1
+}
+
+gdb_test_no_output "record full"
+
+foreach_with_prefix insn_prefix {"set" "cpy" "cpyf"} {
+    global decimal hex
+
+    set before_seq [gdb_get_line_number "Before ${insn_prefix}p"]
+    set after_seq [gdb_get_line_number "After ${insn_prefix}e"]
+
+    gdb_test "break $before_seq" \
+	"Breakpoint $decimal at $hex: file .*/aarch64-mops.c, line $decimal\\." \
+	"break before instruction sequence"
+    gdb_continue_to_breakpoint "about to execute instruction sequence" \
+	[multi_line ".*/aarch64-mops.c:$decimal" \
+	     "$decimal\[ \t\]+__asm__ volatile \\(\"${insn_prefix}p \[^\r\n\]+\""]
+
+    # Depending on the compiler, the line number information may put GDB a few
+    # instructions before the beginning of the asm statement.
+    arrive_at_instruction "${insn_prefix}p"
+    # Add a breakpoint that we're sure is at the prologue instruction.
+    gdb_test "break *\$pc" \
+	"Breakpoint $decimal at $hex: file .*/aarch64-mops.c, line $decimal\\." \
+	"break at prologue instruction"
+
+    # Record the initial memory and register values.
+    set dest_initial [get_valueof "/x" "dest" "unable to read initial" \
+			  "get dest initial value"]
+    set x19_initial [capture_command_output "info register x19" ""]
+    set x21_initial [capture_command_output "info register x21" ""]
+
+    # The set instructions use the ZERO variable, but not Q nor SOURCE,
+    # and the other instructions are the opposite.
+    if {[string compare $insn_prefix "set"] == 0} {
+	set x22_initial [capture_command_output "info register x22" ""]
+    } else {
+	set x20_initial [capture_command_output "info register x20" ""]
+	set source_initial [get_valueof "/x" "source" "unable to read initial" \
+				"get source initial value"]
+    }
+
+    gdb_test "break $after_seq" \
+	"Breakpoint $decimal at $hex: file .*/aarch64-mops.c, line $decimal\\." \
+	"break after instruction sequence"
+    gdb_continue_to_breakpoint "executed instruction sequence" \
+	[multi_line ".*/aarch64-mops.c:$decimal" "$decimal\[ \t\]+p = dest;"]
+
+    # Record the new memory and register values.
+    set dest_new [get_valueof "/x" "dest" "unable to read new" \
+			  "get dest new value"]
+    set x19_new [capture_command_output "info register x19" ""]
+    set x21_new [capture_command_output "info register x21" ""]
+
+    if {[string compare $insn_prefix "set"] == 0} {
+	set x22_new [capture_command_output "info register x22" ""]
+    } else {
+	set x20_new [capture_command_output "info register x20" ""]
+	set source_new [get_valueof "/x" "source" "unable to read new" \
+			    "get source new value"]
+    }
+
+    # Execute in reverse to before the instruction sequence.
+    gdb_test_no_output "set exec-direction reverse"
+
+    gdb_continue_to_breakpoint "reversed execution of instruction sequence" \
+	[multi_line ".*/aarch64-mops.c:$decimal" \
+	     "$decimal\[ \t\]+__asm__ volatile \\(\"${insn_prefix}p \[^\r\n\]+\""]
+
+    # Record the final memory and register values.
+    set dest_final [get_valueof "/x" "dest" "unable to read final" \
+			"get dest final value"]
+    set x19_final [capture_command_output "info register x19" ""]
+    set x21_final [capture_command_output "info register x21" ""]
+
+    if {[string compare $insn_prefix "set"] == 0} {
+	set x22_final [capture_command_output "info register x22" ""]
+    } else {
+	set x20_final [capture_command_output "info register x20" ""]
+	set source_final [get_valueof "/x" "source" "unable to read final" \
+			      "get source final value"]
+    }
+
+    # Check initial and new values of dest are different.
+    gdb_assert [string compare $dest_initial $dest_new] \
+	"check dest initial value versus dest new value"
+
+    # Check initial and new values of x19 are different.
+    gdb_assert [string compare $x19_initial $x19_new] \
+	"check x19 initial value versus x19 new value"
+
+    # Check initial and new values of x21 are different.
+    gdb_assert [string compare $x21_initial $x21_new] \
+	"check x21 initial value versus x21 new value"
+
+    if {[string compare $insn_prefix "set"] == 0} {
+	# Check initial and new values of x22 are the same.
+	# The register with the value to set shouldn't change.
+	gdb_assert ![string compare $x22_initial $x22_new] \
+	    "check x22 initial value versus x22 new value"
+    } else {
+	# Check initial and new values of x20 are different.
+	gdb_assert [string compare $x20_initial $x20_new] \
+	    "check x20 initial value versus x20 new value"
+	# Check initial and new values of source are the same.
+	gdb_assert ![string compare $source_initial $source_new] \
+	    "check source initial value versus source new value"
+    }
+
+    # Check initial and final values of dest are the same.
+    gdb_assert ![string compare $dest_initial $dest_final] \
+	"check dest initial value versus dest final value"
+
+    # Check initial and final values of x19 are the same.
+    gdb_assert ![string compare $x19_initial $x19_final] \
+	"check x19 initial value versus x19 final value"
+
+    # Check initial and final values of x21 are the same.
+    gdb_assert ![string compare $x21_initial $x21_final] \
+	"check x21 initial value versus x21 final value"
+
+    if {[string compare $insn_prefix "set"] == 0} {
+	# Check initial and final values of x22 are the same.
+	gdb_assert ![string compare $x22_initial $x22_final] \
+	    "check x22 initial value versus x22 final value"
+    } else {
+	# Check initial and final values of x20 are the same.
+	gdb_assert ![string compare $x20_initial $x20_final] \
+	    "check x20 initial value versus x20 final value"
+
+	# Check initial and final values of source are the same.
+	gdb_assert ![string compare $source_initial $source_final] \
+	    "check source initial value versus source final value"
+    }
+
+    # Restore forward execution and go to end of recording.
+    gdb_test_no_output "set exec-direction forward"
+    gdb_test "record goto end" \
+	[multi_line \
+	     "Go forward to insn number $decimal" \
+	     "#0  main \\(\\) at .*/aarch64-mops.c:$decimal" \
+	     "$decimal\[ \t\]+p = dest;"]
+}