[gdb/testsuite] test a function call by hand from pretty printer

The test case added here is testing the bug gdb/28856, where calling a
function by hand from a pretty printer makes GDB crash. There are 6
mechanisms to trigger this crash in the current test, using the commands
backtrace, up, down, finish, step and continue. Since the failure happens
because of use-after-free (more details below) the tests will always
have a chance of passing through sheer luck, but anecdotally they seem
to fail all of the time.

The reason GDB is crashing is a use-after-free problem. The above
mentioned functions save a pointer to the current frame's information,
then calls the pretty printer, and uses the saved pointer for different
reasons, depending on the function. The issue happens because
call_function_by_hand needs to reset the obstack to get the current
frame, invalidating the saved pointer.

3 files changed, 221 insertions, 0 deletions

diff --git a/gdb/testsuite/gdb.python/pretty-print-call-by-hand.c b/gdb/testsuite/gdb.python/pretty-print-call-by-hand.c
new file mode 100644
index 0000000..3be5675
--- /dev/null
+++ b/gdb/testsuite/gdb.python/pretty-print-call-by-hand.c
@@ -0,0 +1,53 @@
+/* This testcase is part of GDB, the GNU debugger.
+
+   Copyright 2022 Free Software Foundation, Inc.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 3 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program.  If not, see  <http://www.gnu.org/licenses/>.  */
+
+struct mytype
+{
+  char *x;
+};
+
+void
+rec (int i)
+{
+  if (i <= 0)
+    return;
+  rec (i-1);
+}
+
+int
+f ()
+{
+  rec (100);
+  return 2;
+}
+
+void
+g (struct mytype mt, int depth)
+{
+  if (depth <= 0)
+    return; /* TAG: final frame */
+  g (mt, depth - 1); /* TAG: first frame */
+}
+
+int
+main ()
+{
+  struct mytype mt;
+  mt.x = "hello world";
+  g (mt, 10); /* TAG: outside the frame */
+  return 0;
+}
diff --git a/gdb/testsuite/gdb.python/pretty-print-call-by-hand.exp b/gdb/testsuite/gdb.python/pretty-print-call-by-hand.exp
new file mode 100644
index 0000000..0a6d014
--- /dev/null
+++ b/gdb/testsuite/gdb.python/pretty-print-call-by-hand.exp
@@ -0,0 +1,127 @@
+# Copyright (C) 2022 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# This file is part of the GDB testsuite.  It tests a pretty printer that
+# calls an inferior function by hand, triggering a Use-after-Free bug
+# (PR gdb/28856).
+
+load_lib gdb-python.exp
+
+standard_testfile
+
+# gdb needs to be started here for skip_python_tests to work.
+# prepare_for_testing could be used instead, but it could compile the program
+# unnecessarily, so starting GDB like this is preferable.
+gdb_start
+
+# Skip all tests if Python scripting is not enabled.
+if { [skip_python_tests] } { continue }
+
+if { [prepare_for_testing "failed to prepare" $testfile $srcfile debug] } {
+    untested "failed to compile"
+    return -1
+}
+
+# This proc restarts GDB, makes the inferior reach the desired spot - marked
+# by a comment in the .c file - and turns on the pretty printer for testing.
+# Starting with a new GDB is important because the test may crash GDB.  The
+# return values are here to avoid us trying to test the pretty printer if
+# there was a problem getting to main.
+proc start_test { breakpoint_comment } {
+    global srcdir subdir testfile binfile
+
+    # Start with a fresh gdb.
+    # This is important because the test can crash GDB.
+
+    clean_restart ${binfile}
+
+    if { ![runto_main] } then {
+	untested "couldn't run to breakpoint"
+	return -1
+    }
+
+    # Let GDB get to the return line.
+    gdb_breakpoint [gdb_get_line_number ${breakpoint_comment} ${testfile}.c ]
+    gdb_continue_to_breakpoint ${breakpoint_comment} ".*"
+
+    gdb_test_no_output "set print pretty on" "starting to pretty print"
+
+    set remote_python_file [gdb_remote_download host ${srcdir}/${subdir}/${testfile}.py]
+    gdb_test_no_output "source ${remote_python_file}" "load python file"
+
+    return 0
+}
+
+# Testing the backtrace command.
+with_test_prefix "frame print" {
+    if { [start_test "TAG: final frame"] == 0 } {
+	setup_kfail gdb/28856 "*-*-*"
+	gdb_test "backtrace -frame-arguments all" [multi_line \
+	"#0 .*g \\(mt=mytype is .*\\).*"\
+	"#1 .*g \\(mt=mytype is .*\\).*"\
+	"#2 .*g \\(mt=mytype is .*\\).*"\
+	"#3 .*g \\(mt=mytype is .*\\).*"\
+	"#4 .*g \\(mt=mytype is .*\\).*"\
+	"#5 .*g \\(mt=mytype is .*\\).*"\
+	"#6 .*g \\(mt=mytype is .*\\).*"\
+	"#7 .*g \\(mt=mytype is .*\\).*"\
+	"#8 .*g \\(mt=mytype is .*\\).*"\
+	"#9 .*g \\(mt=mytype is .*\\).*"\
+	"#10 .*g \\(mt=mytype is .*\\).*"\
+	"#11 .*main \\(\\).*"] \
+	"backtrace test"
+    }
+}
+# Testing the down command.
+with_test_prefix "frame movement down" {
+    if { [start_test "TAG: first frame"] == 0 } {
+	gdb_test "up" [multi_line "#1 .*in main \\(\\) at .*" ".*outside the frame.*"]
+	setup_kfail gdb/28856 "*-*-*"
+	gdb_test "down" [multi_line "#0\\s+g \\(mt=mytype is .*\\).*" ".*first frame.*"]
+    }
+}
+
+# Testing the up command.
+with_test_prefix "frame movement up" {
+    if { [start_test "TAG: final frame"] == 0 } {
+	setup_kfail gdb/28856 "*-*-*"
+	gdb_test "up" [multi_line "#1 .*in g \\(mt=mytype is .*\\).*" ".*first frame.*"]
+    }
+}
+
+# Testing the finish command.
+with_test_prefix "frame exit through finish" {
+    if { [start_test "TAG: final frame"] == 0 } {
+	setup_kfail gdb/28856 "*-*-*"
+	gdb_test "finish" [multi_line "Run till exit from #0 .*" ".* g \\(mt=mytype is .*\\, depth=1\\).*" ".*first frame.*"]
+    }
+}
+
+# Testing the step command.
+with_test_prefix "frame enter through step" {
+    if { [start_test "TAG: outside the frame"] == 0 } {
+	setup_kfail gdb/28856 "*-*-*"
+	gdb_test "step" [multi_line "g \\(mt=mytype is .*\\, depth=10\\).*" "41.*if \\(depth \\<= 0\\)"]
+    }
+}
+
+# Testing the continue command.
+with_test_prefix "frame enter through continue" {
+    if { [start_test "TAG: outside the frame"] == 0 } {
+	setup_kfail gdb/28856 "*-*-*"
+	gdb_breakpoint [gdb_get_line_number "TAG: first frame" ${testfile}.c ]
+	gdb_continue_to_breakpoint "TAG: first frame" ".*TAG: first frame.*"
+    }
+}
diff --git a/gdb/testsuite/gdb.python/pretty-print-call-by-hand.py b/gdb/testsuite/gdb.python/pretty-print-call-by-hand.py
new file mode 100644
index 0000000..f8f5df6
--- /dev/null
+++ b/gdb/testsuite/gdb.python/pretty-print-call-by-hand.py
@@ -0,0 +1,41 @@
+# Copyright (C) 2022 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+
+class MytypePrinter:
+    """pretty print my type"""
+
+    def __init__(self, val):
+        self.val = val
+
+    def to_string(self):
+        calls = gdb.parse_and_eval('f()')
+        return "mytype is %s" % self.val['x']
+
+def ec_lookup_function(val):
+    typ = val.type
+    if typ.code == gdb.TYPE_CODE_REF:
+        typ = typ.target()
+    if str(typ) == 'struct mytype':
+        return MytypePrinter(val)
+    return None
+
+def disable_lookup_function():
+    ec_lookup_function.enabled = False
+
+def enable_lookup_function():
+    ec_lookup_function.enabled = True
+
+gdb.pretty_printers.append(ec_lookup_function)