* hosts/i386sco.h: Define a bunch of stuff for core files.

	* sco-core.c: Remove, replace by trad-core.c.
	* trad-core.c: If HOST_STACK_START_ADDR is defined, use it.
	* config/i386sco.mh: Use trad-core not sco-core.
	* hosts/i386isc.h, config/i386isc.mh: Remove.
	* configure.host: Use i386sco for isc.
	* config/i386-sco.mt: Remove, identical to i386-coff.mt.
	* config.bfd: Use i386-coff not i386-sco.

4 files changed, 0 insertions, 350 deletions

diff --git a/bfd/.Sanitize b/bfd/.Sanitize
index ea7efcb..a5bbfcb 100644
--- a/bfd/.Sanitize
+++ b/bfd/.Sanitize
@@ -154,7 +154,6 @@ opncls.c
 reloc.c
 reloc16.c
 rs6000-core.c
-sco-core.c
 seclet.c
 seclet.h
 section.c
diff --git a/bfd/hosts/.Sanitize b/bfd/hosts/.Sanitize
index 422f243..93f062b 100644
--- a/bfd/hosts/.Sanitize
+++ b/bfd/hosts/.Sanitize
@@ -44,7 +44,6 @@ hppabsd.h
 hppahpux.h
 i386aix.h
 i386bsd.h
-i386isc.h
 i386linux.h
 i386lynx.h
 i386mach3.h
diff --git a/bfd/hosts/i386isc.h b/bfd/hosts/i386isc.h
deleted file mode 100644
index b07af47..0000000
--- a/bfd/hosts/i386isc.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/* Host configuration file for Interactive Unix 3.2 */
-/* From Minh Tran-Le <TRANLE@INTELLICORP.COM>.  */
-#include <ansidecl.h>
-#include <fcntl.h>
-#include <errno.h>
-#include <stdio.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <ctype.h>
-#include <string.h>
-#include <unistd.h>
-
-#ifndef O_ACCMODE
-#define O_ACCMODE (O_RDONLY | O_WRONLY | O_RDWR)
-#endif
-#ifndef SEEK_SET
-#define SEEK_SET 0
-#define SEEK_CUR 1
-#endif
-
-#define USE_UTIME
-
-/* Some things that need to be defined in order to make code written for
-   BSD Unix compile under System V Unix.  */
-
-/*#include <memory.h>*/
-#define bcmp(b1,b2,len)		memcmp(b1,b2,len)
-#define bcopy(src,dst,len)	memcpy(dst,src,len)
-#define bzero(s,n)		memset(s,0,n)
-
-#include <string.h>
-
-#ifndef DONTDECLARE_MALLOC
-extern PTR  malloc	PARAMS ((unsigned));
-extern PTR  realloc	PARAMS ((PTR, unsigned));
-extern void free	PARAMS ((PTR));
-#endif
-
-#include "fopen-same.h"
-
-#ifndef fileno
-#define fileno(fp) ((fp)->_file)
-#endif
diff --git a/bfd/sco-core.c b/bfd/sco-core.c
deleted file mode 100644
index fa36b77..0000000
--- a/bfd/sco-core.c
+++ /dev/null
@@ -1,305 +0,0 @@
-/* BFD back-end for SCO System V 3.2 Unix core files.
-   This was based on trad-core.c, which was written by John Gilmore of
-        Cygnus Support.
-   Copyright 1988, 1989, 1991, 1992, 1993 Free Software Foundation, Inc.
-   Written by Scott Michel, IntelliMED Corporation. scottm%intime@uunet
-
-   NB: This does work with SCO System V 3.2 Unix and ODT. However, it
-       may well work with other i386 based *nixen and *nixes.
-
-This file is part of BFD, the Binary File Descriptor library.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/* To use this file on a particular host, configure the host with these
-   parameters in the config/h-HOST file:
-
-	HDEFINES=-DSCO_CORE=1
-	HDEPFILES=sco-core.o
- */
-
-#include "bfd.h"
-#include "sysdep.h"
-#include "libbfd.h"
-#include "obstack.h"
-#include "coff/i386.h"
-#include "coff/internal.h"
-#include "libcoff.h"
-
-#include <stdio.h>
-#include <sys/types.h>
-#include <sys/param.h>
-#include <sys/dir.h>
-#include <signal.h>
-
-#include <sys/file.h>
-#include <sys/user.h>		/* After a.out.h  */
-
-#include <errno.h>
-
-/* This struct is just for allocating two things with one zalloc, so
-   they will be freed together, without violating alignment constraints. */
-
-struct trad_core_struct 
-  {
-    asection *data_section;
-    asection *stack_section;
-    asection *reg_section;
-
-    struct user		u;
-  } *rawptr;
-
-#define core_upage(bfd) (&((bfd)->tdata.trad_core_data->u))
-#define core_datasec(bfd) ((bfd)->tdata.trad_core_data->data_section)
-#define core_stacksec(bfd) ((bfd)->tdata.trad_core_data->stack_section)
-#define core_regsec(bfd) ((bfd)->tdata.trad_core_data->reg_section)
-
-/* Handle 4.2-style (and perhaps also sysV-style) core dump file.  */
-
-/* ARGSUSED */
-bfd_target *
-sco_core_file_p (abfd)
-     bfd *abfd;
-
-{
-  int val;
-  struct user u;
-
-  bfd_seek(abfd, (file_ptr) 0, SEEK_SET);
-  val = bfd_read ((void *)&u, 1, sizeof u, abfd);
-  if (val != sizeof u)
-    return 0;			/* Too small to be a core file */
-
-  /* Check that the size claimed is no greater than the file size. FIXME. */
-
-  /* OK, we believe you.  You're a core file (sure, sure).  */
-
-  /* Allocate both the upage and the struct core_data at once, so
-     a single free() will free them both.  */
-  rawptr = (struct trad_core_struct *)
-	   bfd_zalloc (abfd, sizeof (struct trad_core_struct));
-  if (rawptr == NULL) {
-    bfd_error = no_memory;
-    return 0;
-  }
-  
-  abfd->tdata.trad_core_data = rawptr;
-
-  rawptr->u = u; /* Copy the uarea into the tdata part of the bfd */
-
-  /* Create the sections.  This is raunchy, but bfd_close wants to free
-     them separately.  */
-
-  core_stacksec(abfd) = (asection *) zalloc (sizeof (asection));
-  if (core_stacksec (abfd) == NULL) {
-  loser:
-    bfd_error = no_memory;
-    free ((void *)rawptr);
-    return 0;
-  }
-  core_datasec (abfd) = (asection *) zalloc (sizeof (asection));
-  if (core_datasec (abfd) == NULL) {
-  loser1:
-    free ((void *)core_stacksec (abfd));
-    goto loser;
-  }
-  core_regsec (abfd) = (asection *) zalloc (sizeof (asection));
-  if (core_regsec (abfd) == NULL) {
-    free ((void *)core_datasec (abfd));
-    goto loser1;
-  }
-
-  core_stacksec (abfd)->name = ".stack";
-  core_datasec (abfd)->name = ".data";
-  core_regsec (abfd)->name = ".reg";
-
-  core_stacksec (abfd)->flags = SEC_ALLOC + SEC_LOAD + SEC_HAS_CONTENTS;
-  core_datasec (abfd)->flags = SEC_ALLOC + SEC_LOAD + SEC_HAS_CONTENTS;
-  core_regsec (abfd)->flags = SEC_ALLOC + SEC_HAS_CONTENTS;
-
-  core_datasec (abfd)->_raw_size =  NBPC * u.u_dsize;
-  core_stacksec (abfd)->_raw_size = NBPC * u.u_ssize;
-  core_regsec (abfd)->_raw_size = NBPC * USIZE; /* Larger than sizeof struct u */
-
-  /* Under SCO, we get at the exact addresses of things: */
-  core_datasec (abfd)->vma = u.u_exdata.ux_datorg;
-  core_stacksec (abfd)->vma = u.u_sub;
-
-  /* This is tricky.  As the "register section", we give them the entire
-     upage and stack.  u.u_ar0 points to where "register 0" is stored.
-     There are two tricks with this, though.  One is that the rest of the
-     registers might be at positive or negative (or both) displacements
-     from *u_ar0.  The other is that u_ar0 is sometimes an absolute address
-     in kernel memory, and on other systems it is an offset from the beginning
-     of the `struct user'.
-     
-     As a practical matter, we don't know where the registers actually are,
-     so we have to pass the whole area to GDB.  We encode the value of u_ar0
-     by setting the .regs section up so that its virtual memory address
-     0 is at the place pointed to by u_ar0 (by setting the vma of the start
-     of the section to -u_ar0).  GDB uses this info to locate the regs,
-     using minor trickery to get around the offset-or-absolute-addr problem. */
-  core_regsec (abfd)->vma = 0 - (int) u.u_ar0;
-
-  core_datasec (abfd)->filepos = NBPC * USIZE;
-  core_stacksec (abfd)->filepos = (NBPC * USIZE) + NBPC * u.u_dsize;
-  core_regsec (abfd)->filepos = 0; /* Register segment is the upage */
-
-  /* Align to word at least */
-  core_stacksec (abfd)->alignment_power = 2;
-  core_datasec (abfd)->alignment_power = 2;
-  core_regsec (abfd)->alignment_power = 2;
-
-  abfd->sections = core_stacksec (abfd);
-  core_stacksec (abfd)->next = core_datasec (abfd);
-  core_datasec (abfd)->next = core_regsec (abfd);
-  abfd->section_count = 3;
-
-  return abfd->xvec;
-}
-
-char *
-sco_core_file_failing_command (abfd)
-     bfd *abfd;
-{
-  char *com = abfd->tdata.trad_core_data->u.u_comm;
-  if (*com)
-    return com;
-  else
-    return 0;
-}
-
-/* ARGSUSED */
-int
-sco_core_file_failing_signal (abfd)
-     bfd *abfd;
-{
-  int retval = -1;
-
-  if (core_upage(abfd)->u_sysabort != 0)
-    retval = core_upage(abfd)->u_sysabort;
-
-  return retval;
-}
-
-/* ARGSUSED */
-boolean
-sco_core_file_matches_executable_p  (core_bfd, exec_bfd)
-     bfd *core_bfd, *exec_bfd;
-{
-  return true;
-}
-
-/* No archive file support via this BFD */
-#define	sco_openr_next_archived_file	bfd_generic_openr_next_archived_file
-#define	sco_generic_stat_arch_elt	bfd_generic_stat_arch_elt
-#define	sco_slurp_armap			bfd_false
-#define	sco_slurp_extended_name_table	bfd_true
-#define	sco_write_armap			(PROTO (boolean, (*),	\
-     (bfd *arch, unsigned int elength, struct orl *map, \
-      unsigned int orl_count, int stridx))) bfd_false
-#define	sco_truncate_arname		bfd_dont_truncate_arname
-#define	aout_32_openr_next_archived_file bfd_generic_openr_next_archived_file
-
-#define	sco_close_and_cleanup		bfd_generic_close_and_cleanup
-#define	sco_set_section_contents		(PROTO(boolean, (*),	\
-         (bfd *abfd, asection *section, PTR data, file_ptr offset,	\
-         bfd_size_type count))) bfd_false
-#define	sco_get_section_contents		bfd_generic_get_section_contents
-#define	sco_new_section_hook		(PROTO (boolean, (*),	\
-	(bfd *, sec_ptr))) bfd_true
-#define	sco_get_symtab_upper_bound	bfd_0u
-#define	sco_get_symtab			(PROTO (unsigned int, (*), \
-        (bfd *, struct symbol_cache_entry **))) bfd_0u
-#define	sco_get_reloc_upper_bound		(PROTO (unsigned int, (*), \
-	(bfd *, sec_ptr))) bfd_0u
-#define	sco_canonicalize_reloc		(PROTO (unsigned int, (*), \
-	(bfd *, sec_ptr, arelent **, struct symbol_cache_entry**))) bfd_0u
-#define	sco_make_empty_symbol		(PROTO (		\
-	struct symbol_cache_entry *, (*), (bfd *))) bfd_false
-#define	sco_print_symbol			(PROTO (void, (*),	\
-	(bfd *, PTR, struct symbol_cache_entry  *,			\
-	 bfd_print_symbol_type))) bfd_false
-#define	sco_get_symbol_info			(PROTO (void, (*),	\
-	(bfd *, struct symbol_cache_entry  *,			\
-	 symbol_info *))) bfd_false
-#define	sco_get_lineno			(PROTO (alent *, (*),	\
-	(bfd *, struct symbol_cache_entry *))) bfd_nullvoidptr
-#define	sco_set_arch_mach			(PROTO (boolean, (*),	\
-	(bfd *, enum bfd_architecture, unsigned long))) bfd_false
-#define	sco_find_nearest_line		(PROTO (boolean, (*),	\
-        (bfd *abfd, struct sec  *section,				\
-         struct symbol_cache_entry  **symbols,bfd_vma offset,		\
-         CONST char **file, CONST char **func, unsigned int *line))) bfd_false
-#define	sco_sizeof_headers		(PROTO (int, (*),	\
-	(bfd *, boolean))) bfd_0
-
-#define sco_bfd_debug_info_start		bfd_void
-#define sco_bfd_debug_info_end		bfd_void
-#define sco_bfd_debug_info_accumulate	(PROTO (void, (*),	\
-	(bfd *, struct sec *))) bfd_void
-#define sco_bfd_get_relocated_section_contents bfd_generic_get_relocated_section_contents
-#define sco_bfd_relax_section bfd_generic_relax_section
-#define sco_bfd_seclet_link \
-  ((boolean (*) PARAMS ((bfd *, PTR, boolean))) bfd_false)
-#define sco_bfd_reloc_type_lookup \
-  ((CONST struct reloc_howto_struct *(*) PARAMS ((bfd *, bfd_reloc_code_real_type))) bfd_nullvoidptr)
-#define sco_bfd_make_debug_symbol \
-  ((asymbol *(*) PARAMS ((bfd *, void *, unsigned long))) bfd_nullvoidptr)
-
-/* If somebody calls any byte-swapping routines, shoot them.  */
-void
-swap_abort()
-{
-  abort(); /* This way doesn't require any declaration for ANSI to fuck up */
-}
-#define	NO_GET	((PROTO(bfd_vma, (*), (         bfd_byte *))) swap_abort )
-#define	NO_PUT	((PROTO(void,    (*), (bfd_vma, bfd_byte *))) swap_abort )
-
-bfd_target sco_core_vec =
-  {
-    "sco-core",
-    bfd_target_unknown_flavour,
-    true,			/* target byte order */
-    true,			/* target headers byte order */
-  (HAS_RELOC | EXEC_P |		/* object flags */
-   HAS_LINENO | HAS_DEBUG |
-   HAS_SYMS | HAS_LOCALS | DYNAMIC | WP_TEXT),
-
-  (SEC_HAS_CONTENTS | SEC_ALLOC | SEC_LOAD | SEC_RELOC), /* section flags */
-    0,						/* leading underscore */
-    ' ',					/* ar_pad_char */
-    16,						/* ar_max_namelen */
-    3,						/* minimum alignment power */
-
-    NO_GET, NO_GET, NO_PUT,	/* 64 bit data */
-    NO_GET, NO_GET, NO_PUT,	/* 32 bit data */
-    NO_GET, NO_GET, NO_PUT,	/* 16 bit data */
-    NO_GET, NO_GET, NO_PUT,	/* 64 bit hdrs */
-    NO_GET, NO_GET, NO_PUT,	/* 32 bit hdrs */
-    NO_GET, NO_GET, NO_PUT,	/* 16 bit hdrs */
-
-    {_bfd_dummy_target, _bfd_dummy_target,
-     _bfd_dummy_target, sco_core_file_p},
-    {bfd_false, bfd_false,	/* bfd_create_object */
-     bfd_false, bfd_false},
-    {bfd_false, bfd_false,	/* bfd_write_contents */
-     bfd_false, bfd_false},
-    
-    JUMP_TABLE(sco),
-    (PTR) 0
-};
-
-