aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorSimon Marchi <simon.marchi@polymtl.ca>2016-11-17 12:02:32 -0500
committerSimon Marchi <simon.marchi@ericsson.com>2016-11-17 12:02:32 -0500
commit470dd0a647c95a2e88c5b0f8df538826b08959a8 (patch)
treee4fbcd74b8299ce632b2961c5b0320ab20b7a0a3
parent5443506ee45cb94769db7e76dd2021a96f2f0680 (diff)
downloadgdb-470dd0a647c95a2e88c5b0f8df538826b08959a8.zip
gdb-470dd0a647c95a2e88c5b0f8df538826b08959a8.tar.gz
gdb-470dd0a647c95a2e88c5b0f8df538826b08959a8.tar.bz2
Makefile: Replace explicit subdir rules with pattern rules
When adding a .c file in subdirectory (e.g. mi/), the current practice is to add an explicit rule, such as: mi-cmd-break.o: $(srcdir)/mi/mi-cmd-break.c $(COMPILE) $(srcdir)/mi/mi-cmd-break.c $(POSTCOMPILE) I find it a bit verbose and cumbersome. Since we now require GNU make, we can change those rules with pattern rules, one for each subdirectory. For example, the following rule works for all files under mi: %.o: $(srcdir)/mi/%.c $(COMPILE) $< $(POSTCOMPILE) Those pattern rules assume that the source and target files have the same stem (foo.c and foo.o). In one case, common-agent.o is generated from common/agent.c, to avoid a conflict with the agent.o in gdb/. In this case, I kept the explicit rule, which takes precedence over the pattern rule. We could also rename common/agent.c to common/common-agent.c to get rid of the special case and still avoid the clash, as it is done with common/common-regcache.c, for example. This strategy was the least intrusive I found, as it only requires changing the rules, not the target names. I also considered two other solutions, which I did not like because I would have had to change target names a bit everywhere. - Replicate the source directory structure in the build directory, which would generate common/agent.o from common/agent.c. However, something was not right with the dependency tracking (the .deps directory). It's probably not hard to fix, but I did not investigate further. - Name the object files after the directory they are in, so that common/agent.c would generate common_agent.c. GDBserver can benefit from the same treatment, but I'll do it in another patch. Built-tested with --enable-targets=all. New in v2: - Regroup pattern rules for .c -> .o compilation in a single place. - Add comment about common-agent.o. gdb/ChangeLog: (PYTHON_CFLAGS): Move up. (%.o: $(srcdir)/arch/%.c): New rule. (%.o: $(srcdir)/cli/%.c): New rule. (%.o: $(srcdir)/common/%.c): New rule. (%.o: $(srcdir)/compile/%.c): New rule. (%.o: $(srcdir)/gdbtk/generic/%.c): New rule. (%.o: $(srcdir)/guile/%.c): New rule. (%.o: $(srcdir)/mi/%.c): New rule. (%.o: $(srcdir)/nat/%.c): New rule. (%.o: $(srcdir)/python/%.c): New rule. (%.o: $(srcdir)/target/%.c): New rule. (%.o: $(srcdir)/tui/%.c): New rule. (cli-cmds.o): Remove. (cli-decode.o): Likewise. (cli-dump.o): Likewise. (cli-interp.o): Likewise. (cli-logging.o): Likewise. (cli-script.o): Likewise. (cli-setshow.o): Likewise. (cli-utils.o): Likewise. (compile.o): Likewise. (compile-c-types.o): Likewise. (compile-c-symbols.o): Likewise. (compile-object-load.o): Likewise. (compile-object-run.o): Likewise. (compile-loc2c.o): Likewise. (compile-c-support.o): Likewise. (gdbtk.o): Likewise. (gdbtk-bp.o): Likewise. (gdbtk-cmds.o): Likewise. (gdbtk-hooks.o): Likewise. (gdbtk-interp.o): Likewise. (gdbtk-main.o): Likewise. (gdbtk-register.o): Likewise. (gdbtk-stack.o): Likewise. (gdbtk-varobj.o): Likewise. (gdbtk-wrapper.o): Likewise. (mi-cmd-break.o): Likewise. (mi-cmd-catch.o): Likewise. (mi-cmd-disas.o): Likewise. (mi-cmd-env.o): Likewise. (mi-cmd-file.o): Likewise. (mi-cmd-info.o): Likewise. (mi-cmds.o): Likewise. (mi-cmd-stack.o): Likewise. (mi-cmd-target.o): Likewise. (mi-cmd-var.o): Likewise. (mi-console.o): Likewise. (mi-getopt.o): Likewise. (mi-interp.o): Likewise. (mi-main.o): Likewise. (mi-out.o): Likewise. (mi-parse.o): Likewise. (mi-symbol-cmds.o): Likewise. (mi-common.o): Likewise. (signals.o): Likewise. (common-utils.o): Likewise. (gdb_vecs.o): Likewise. (xml-utils.o): Likewise. (ptid.o): Likewise. (buffer.o): Likewise. (filestuff.o): Likewise. (format.o): Likewise. (vec.o): Likewise. (print-utils.o): Likewise. (rsp-low.o): Likewise. (errors.o): Likewise. (common-debug.o): Likewise. (cleanups.o): Likewise. (common-exceptions.o (posix-strerror.o): Likewise. (mingw-strerror.o): Likewise. (btrace-common.o): Likewise. (fileio.o): Likewise. (common-regcache.o): Likewise. (signals-state-save-restore.o): Likewise. (new-op.o): Likewise. (waitstatus.o): Likewise. (arm.o): Likewise. (arm-linux.o): Likewise. (arm-get-next-pcs.o): Likewise. (x86-dregs.o): Likewise. (linux-btrace.o): Likewise. (linux-osdata.o): Likewise. (linux-procfs.o): Likewise. (linux-ptrace.o): Likewise. (linux-waitpid.o): Likewise. (mips-linux-watch.o): Likewise. (ppc-linux.o): Likewise. (linux-personality.o): Likewise. (x86-linux.o): Likewise. (x86-linux-dregs.o): Likewise. (amd64-linux-siginfo.o): Likewise. (linux-namespaces.o): Likewise. (aarch64-linux-hw-point.o): Likewise. (aarch64-linux.o): Likewise. (aarch64-insn.o): Likewise. (tui.o): Likewise. (tui-command.o): Likewise. (tui-data.o): Likewise. (tui-disasm.o): Likewise. (tui-file.o): Likewise. (tui-hooks.o): Likewise. (tui-interp.o): Likewise. (tui-io.o): Likewise. (tui-layout.o): Likewise. (tui-out.o): Likewise. (tui-regs.o): Likewise. (tui-source.o): Likewise. (tui-stack.o): Likewise. (tui-win.o): Likewise. (tui-windata.o): Likewise. (tui-wingeneral.o): Likewise. (tui-winsource.o): Likewise. (guile.o): Likewise. (scm-arch.o): Likewise. (scm-auto-load.o): Likewise. (scm-block.o): Likewise. (scm-breakpoint.o): Likewise. (scm-cmd.o): Likewise. (scm-disasm.o): Likewise. (scm-exception.o): Likewise. (scm-frame.o): Likewise. (scm-gsmob.o): Likewise. (scm-iterator.o): Likewise. (scm-lazy-string.o): Likewise. (scm-math.o): Likewise. (scm-objfile.o): Likewise. (scm-param.o): Likewise. (scm-ports.o): Likewise. (scm-pretty-print.o): Likewise. (scm-progspace.o): Likewise. (scm-safe-call.o): Likewise. (scm-string.o): Likewise. (scm-symbol.o): Likewise. (scm-symtab.o): Likewise. (scm-type.o): Likewise. (scm-utils.o): Likewise. (scm-value.o): Likewise. (python.o): Likewise. (py-arch.o): Likewise. (py-auto-load.o): Likewise. (py-block.o): Likewise. (py-bpevent.o): Likewise. (py-breakpoint.o): Likewise. (py-cmd.o): Likewise. (py-continueevent.o): Likewise. (py-xmethods.o): Likewise. (py-event.o): Likewise. (py-evtregistry.o): Likewise. (py-evts.o): Likewise. (py-exitedevent.o): Likewise. (py-finishbreakpoint.o): Likewise. (py-frame.o): Likewise. (py-framefilter.o): Likewise. (py-function.o): Likewise. (py-gdb-readline.o): Likewise. (py-inferior.o): Likewise. (py-infevents.o): Likewise. (py-infthread.o): Likewise. (py-lazy-string.o): Likewise. (py-linetable.o): Likewise. (py-newobjfileevent.o): Likewise. (py-objfile.o): Likewise. (py-param.o): Likewise. (py-prettyprint.o): Likewise. (py-progspace.o): Likewise. (py-signalevent.o): Likewise. (py-stopevent.o): Likewise. (py-symbol.o): Likewise. (py-symtab.o): Likewise. (py-threadevent.o): Likewise. (py-type.o): Likewise. (py-unwind.o): Likewise. (py-utils.o): Likewise. (py-value.o): Likewise. (py-varobj.o): Likewise.
-rw-r--r--gdb/ChangeLog180
-rw-r--r--gdb/Makefile.in789
2 files changed, 236 insertions, 733 deletions
diff --git a/gdb/ChangeLog b/gdb/ChangeLog
index 3585b32..07b564b 100644
--- a/gdb/ChangeLog
+++ b/gdb/ChangeLog
@@ -1,5 +1,185 @@
2016-11-17 Simon Marchi <simon.marchi@polymtl.ca>
+ (PYTHON_CFLAGS): Move up.
+ (%.o: $(srcdir)/arch/%.c): New rule.
+ (%.o: $(srcdir)/cli/%.c): New rule.
+ (%.o: $(srcdir)/common/%.c): New rule.
+ (%.o: $(srcdir)/compile/%.c): New rule.
+ (%.o: $(srcdir)/gdbtk/generic/%.c): New rule.
+ (%.o: $(srcdir)/guile/%.c): New rule.
+ (%.o: $(srcdir)/mi/%.c): New rule.
+ (%.o: $(srcdir)/nat/%.c): New rule.
+ (%.o: $(srcdir)/python/%.c): New rule.
+ (%.o: $(srcdir)/target/%.c): New rule.
+ (%.o: $(srcdir)/tui/%.c): New rule.
+ (cli-cmds.o): Remove.
+ (cli-decode.o): Likewise.
+ (cli-dump.o): Likewise.
+ (cli-interp.o): Likewise.
+ (cli-logging.o): Likewise.
+ (cli-script.o): Likewise.
+ (cli-setshow.o): Likewise.
+ (cli-utils.o): Likewise.
+ (compile.o): Likewise.
+ (compile-c-types.o): Likewise.
+ (compile-c-symbols.o): Likewise.
+ (compile-object-load.o): Likewise.
+ (compile-object-run.o): Likewise.
+ (compile-loc2c.o): Likewise.
+ (compile-c-support.o): Likewise.
+ (gdbtk.o): Likewise.
+ (gdbtk-bp.o): Likewise.
+ (gdbtk-cmds.o): Likewise.
+ (gdbtk-hooks.o): Likewise.
+ (gdbtk-interp.o): Likewise.
+ (gdbtk-main.o): Likewise.
+ (gdbtk-register.o): Likewise.
+ (gdbtk-stack.o): Likewise.
+ (gdbtk-varobj.o): Likewise.
+ (gdbtk-wrapper.o): Likewise.
+ (mi-cmd-break.o): Likewise.
+ (mi-cmd-catch.o): Likewise.
+ (mi-cmd-disas.o): Likewise.
+ (mi-cmd-env.o): Likewise.
+ (mi-cmd-file.o): Likewise.
+ (mi-cmd-info.o): Likewise.
+ (mi-cmds.o): Likewise.
+ (mi-cmd-stack.o): Likewise.
+ (mi-cmd-target.o): Likewise.
+ (mi-cmd-var.o): Likewise.
+ (mi-console.o): Likewise.
+ (mi-getopt.o): Likewise.
+ (mi-interp.o): Likewise.
+ (mi-main.o): Likewise.
+ (mi-out.o): Likewise.
+ (mi-parse.o): Likewise.
+ (mi-symbol-cmds.o): Likewise.
+ (mi-common.o): Likewise.
+ (signals.o): Likewise.
+ (common-utils.o): Likewise.
+ (gdb_vecs.o): Likewise.
+ (xml-utils.o): Likewise.
+ (ptid.o): Likewise.
+ (buffer.o): Likewise.
+ (filestuff.o): Likewise.
+ (format.o): Likewise.
+ (vec.o): Likewise.
+ (print-utils.o): Likewise.
+ (rsp-low.o): Likewise.
+ (errors.o): Likewise.
+ (common-debug.o): Likewise.
+ (cleanups.o): Likewise.
+ (common-exceptions.o
+ (posix-strerror.o): Likewise.
+ (mingw-strerror.o): Likewise.
+ (btrace-common.o): Likewise.
+ (fileio.o): Likewise.
+ (common-regcache.o): Likewise.
+ (signals-state-save-restore.o): Likewise.
+ (new-op.o): Likewise.
+ (waitstatus.o): Likewise.
+ (arm.o): Likewise.
+ (arm-linux.o): Likewise.
+ (arm-get-next-pcs.o): Likewise.
+ (x86-dregs.o): Likewise.
+ (linux-btrace.o): Likewise.
+ (linux-osdata.o): Likewise.
+ (linux-procfs.o): Likewise.
+ (linux-ptrace.o): Likewise.
+ (linux-waitpid.o): Likewise.
+ (mips-linux-watch.o): Likewise.
+ (ppc-linux.o): Likewise.
+ (linux-personality.o): Likewise.
+ (x86-linux.o): Likewise.
+ (x86-linux-dregs.o): Likewise.
+ (amd64-linux-siginfo.o): Likewise.
+ (linux-namespaces.o): Likewise.
+ (aarch64-linux-hw-point.o): Likewise.
+ (aarch64-linux.o): Likewise.
+ (aarch64-insn.o): Likewise.
+ (tui.o): Likewise.
+ (tui-command.o): Likewise.
+ (tui-data.o): Likewise.
+ (tui-disasm.o): Likewise.
+ (tui-file.o): Likewise.
+ (tui-hooks.o): Likewise.
+ (tui-interp.o): Likewise.
+ (tui-io.o): Likewise.
+ (tui-layout.o): Likewise.
+ (tui-out.o): Likewise.
+ (tui-regs.o): Likewise.
+ (tui-source.o): Likewise.
+ (tui-stack.o): Likewise.
+ (tui-win.o): Likewise.
+ (tui-windata.o): Likewise.
+ (tui-wingeneral.o): Likewise.
+ (tui-winsource.o): Likewise.
+ (guile.o): Likewise.
+ (scm-arch.o): Likewise.
+ (scm-auto-load.o): Likewise.
+ (scm-block.o): Likewise.
+ (scm-breakpoint.o): Likewise.
+ (scm-cmd.o): Likewise.
+ (scm-disasm.o): Likewise.
+ (scm-exception.o): Likewise.
+ (scm-frame.o): Likewise.
+ (scm-gsmob.o): Likewise.
+ (scm-iterator.o): Likewise.
+ (scm-lazy-string.o): Likewise.
+ (scm-math.o): Likewise.
+ (scm-objfile.o): Likewise.
+ (scm-param.o): Likewise.
+ (scm-ports.o): Likewise.
+ (scm-pretty-print.o): Likewise.
+ (scm-progspace.o): Likewise.
+ (scm-safe-call.o): Likewise.
+ (scm-string.o): Likewise.
+ (scm-symbol.o): Likewise.
+ (scm-symtab.o): Likewise.
+ (scm-type.o): Likewise.
+ (scm-utils.o): Likewise.
+ (scm-value.o): Likewise.
+ (python.o): Likewise.
+ (py-arch.o): Likewise.
+ (py-auto-load.o): Likewise.
+ (py-block.o): Likewise.
+ (py-bpevent.o): Likewise.
+ (py-breakpoint.o): Likewise.
+ (py-cmd.o): Likewise.
+ (py-continueevent.o): Likewise.
+ (py-xmethods.o): Likewise.
+ (py-event.o): Likewise.
+ (py-evtregistry.o): Likewise.
+ (py-evts.o): Likewise.
+ (py-exitedevent.o): Likewise.
+ (py-finishbreakpoint.o): Likewise.
+ (py-frame.o): Likewise.
+ (py-framefilter.o): Likewise.
+ (py-function.o): Likewise.
+ (py-gdb-readline.o): Likewise.
+ (py-inferior.o): Likewise.
+ (py-infevents.o): Likewise.
+ (py-infthread.o): Likewise.
+ (py-lazy-string.o): Likewise.
+ (py-linetable.o): Likewise.
+ (py-newobjfileevent.o): Likewise.
+ (py-objfile.o): Likewise.
+ (py-param.o): Likewise.
+ (py-prettyprint.o): Likewise.
+ (py-progspace.o): Likewise.
+ (py-signalevent.o): Likewise.
+ (py-stopevent.o): Likewise.
+ (py-symbol.o): Likewise.
+ (py-symtab.o): Likewise.
+ (py-threadevent.o): Likewise.
+ (py-type.o): Likewise.
+ (py-unwind.o): Likewise.
+ (py-utils.o): Likewise.
+ (py-value.o): Likewise.
+ (py-varobj.o): Likewise.
+
+2016-11-17 Simon Marchi <simon.marchi@polymtl.ca>
+
* Makefile.in (.c.o): Replace rule with ...
(%.o: %.c): ... this one.
(.po.gmo): Replace rule with ...
diff --git a/gdb/Makefile.in b/gdb/Makefile.in
index fe10a8d..1d6da4b 100644
--- a/gdb/Makefile.in
+++ b/gdb/Makefile.in
@@ -1122,12 +1122,66 @@ DISTSTUFF = $(YYFILES)
generated_files = config.h observer.h observer.inc ada-lex.c jit-reader.h \
$(GNULIB_H) $(NAT_GENERATED_FILES) gcore
+# Flags needed to compile Python code
+PYTHON_CFLAGS=@PYTHON_CFLAGS@
+
+all: gdb$(EXEEXT) $(CONFIG_ALL)
+ @$(MAKE) $(FLAGS_TO_PASS) DO=all "DODIRS=`echo $(SUBDIRS) | sed 's/testsuite//'`" subdir_do
+
+# Rule for compiling .c files in the top-level gdb directory.
%.o: %.c
$(COMPILE) $<
$(POSTCOMPILE)
-all: gdb$(EXEEXT) $(CONFIG_ALL)
- @$(MAKE) $(FLAGS_TO_PASS) DO=all "DODIRS=`echo $(SUBDIRS) | sed 's/testsuite//'`" subdir_do
+# Rules for compiling .c files in the various source subdirectories.
+%.o: ${srcdir}/arch/%.c
+ $(COMPILE) $<
+ $(POSTCOMPILE)
+
+%.o: $(srcdir)/cli/%.c
+ $(COMPILE) $<
+ $(POSTCOMPILE)
+
+%.o: ${srcdir}/common/%.c
+ $(COMPILE) $<
+ $(POSTCOMPILE)
+
+%.o: $(srcdir)/compile/%.c
+ $(COMPILE) $<
+ $(POSTCOMPILE)
+
+%.o: $(srcdir)/gdbtk/generic/%.c
+ $(COMPILE) $(all_gdbtk_cflags) %<
+ $(POSTCOMPILE)
+
+%.o: $(srcdir)/guile/%.c
+ $(COMPILE) $<
+ $(POSTCOMPILE)
+
+%.o: $(srcdir)/mi/%.c
+ $(COMPILE) $<
+
+%.o: ${srcdir}/nat/%.c
+ $(COMPILE) $<
+ $(POSTCOMPILE)
+
+%.o: $(srcdir)/python/%.c
+ $(COMPILE) $(PYTHON_CFLAGS) $<
+ $(POSTCOMPILE)
+
+%.o: ${srcdir}/target/%.c
+ $(COMPILE) $<
+ $(POSTCOMPILE)
+
+%.o: $(srcdir)/tui/%.c
+ $(COMPILE) $<
+ $(POSTCOMPILE)
+
+# Specify an explicit rule for gdb/common/agent.c, to avoid a clash with the
+# object file generate by gdb/agent.c.
+common-agent.o: $(srcdir)/common/agent.c
+ $(COMPILE) $(srcdir)/common/agent.c
+ $(POSTCOMPILE)
installcheck:
@@ -1934,82 +1988,8 @@ stamp-xml: $(srcdir)/features/feature_to_c.sh Makefile $(XMLFILES)
.PRECIOUS: xml-builtin.c
#
-# gdb/cli/ dependencies
-#
-# Need to explicitly specify the compile rule as make will do nothing
-# or try to compile the object file into the sub-directory.
-
-cli-cmds.o: $(srcdir)/cli/cli-cmds.c
- $(COMPILE) $(srcdir)/cli/cli-cmds.c
- $(POSTCOMPILE)
-
-cli-decode.o: $(srcdir)/cli/cli-decode.c
- $(COMPILE) $(srcdir)/cli/cli-decode.c
- $(POSTCOMPILE)
-
-cli-dump.o: $(srcdir)/cli/cli-dump.c
- $(COMPILE) $(srcdir)/cli/cli-dump.c
- $(POSTCOMPILE)
-
-cli-interp.o: $(srcdir)/cli/cli-interp.c
- $(COMPILE) $(srcdir)/cli/cli-interp.c
- $(POSTCOMPILE)
-
-cli-logging.o: $(srcdir)/cli/cli-logging.c
- $(COMPILE) $(srcdir)/cli/cli-logging.c
- $(POSTCOMPILE)
-
-cli-script.o: $(srcdir)/cli/cli-script.c
- $(COMPILE) $(srcdir)/cli/cli-script.c
- $(POSTCOMPILE)
-
-cli-setshow.o: $(srcdir)/cli/cli-setshow.c
- $(COMPILE) $(srcdir)/cli/cli-setshow.c
- $(POSTCOMPILE)
-
-cli-utils.o: $(srcdir)/cli/cli-utils.c
- $(COMPILE) $(srcdir)/cli/cli-utils.c
- $(POSTCOMPILE)
-
-# GCC Compile support dependencies
-#
-# Need to explicitly specify the compile rule as make will do nothing
-# or try to compile the object file into the sub-directory.
-
-compile.o: $(srcdir)/compile/compile.c
- $(COMPILE) $(srcdir)/compile/compile.c
- $(POSTCOMPILE)
-
-compile-c-types.o: $(srcdir)/compile/compile-c-types.c
- $(COMPILE) $(srcdir)/compile/compile-c-types.c
- $(POSTCOMPILE)
-
-compile-c-symbols.o: $(srcdir)/compile/compile-c-symbols.c
- $(COMPILE) $(srcdir)/compile/compile-c-symbols.c
- $(POSTCOMPILE)
-
-compile-object-load.o: $(srcdir)/compile/compile-object-load.c
- $(COMPILE) $(srcdir)/compile/compile-object-load.c
- $(POSTCOMPILE)
-
-compile-object-run.o: $(srcdir)/compile/compile-object-run.c
- $(COMPILE) $(srcdir)/compile/compile-object-run.c
- $(POSTCOMPILE)
-
-compile-loc2c.o: $(srcdir)/compile/compile-loc2c.c
- $(COMPILE) $(srcdir)/compile/compile-loc2c.c
- $(POSTCOMPILE)
-
-compile-c-support.o: $(srcdir)/compile/compile-c-support.c
- $(COMPILE) $(srcdir)/compile/compile-c-support.c
- $(POSTCOMPILE)
-
-
-#
# GDBTK sub-directory
#
-# Need to explicitly specify the compile rule as make will do nothing
-# or try to compile the object file into the mi directory.
all-gdbtk: insight$(EXEEXT)
@@ -2074,663 +2054,6 @@ all_gdbtk_cflags = $(IDE_CFLAGS) $(ITCL_CFLAGS) \
-DGDBTK_LIBRARY=\"$(GDBTK_LIBRARY)\" \
-DSRC_DIR=\"$(GDBTK_SRC_DIR)\"
-gdbtk.o: $(srcdir)/gdbtk/generic/gdbtk.c
- $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk.c
- $(POSTCOMPILE)
-
-gdbtk-bp.o: $(srcdir)/gdbtk/generic/gdbtk-bp.c
- $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-bp.c
- $(POSTCOMPILE)
-
-gdbtk-cmds.o: $(srcdir)/gdbtk/generic/gdbtk-cmds.c
- $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-cmds.c
- $(POSTCOMPILE)
-
-gdbtk-hooks.o: $(srcdir)/gdbtk/generic/gdbtk-hooks.c
- $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-hooks.c
- $(POSTCOMPILE)
-
-gdbtk-interp.o: $(srcdir)/gdbtk/generic/gdbtk-interp.c
- $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-interp.c
- $(POSTCOMPILE)
-
-gdbtk-main.o: $(srcdir)/gdbtk/generic/gdbtk-main.c
- $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-main.c
- $(POSTCOMPILE)
-
-gdbtk-register.o: $(srcdir)/gdbtk/generic/gdbtk-register.c
- $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-register.c
- $(POSTCOMPILE)
-
-gdbtk-stack.o: $(srcdir)/gdbtk/generic/gdbtk-stack.c
- $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-stack.c
- $(POSTCOMPILE)
-
-gdbtk-varobj.o: $(srcdir)/gdbtk/generic/gdbtk-varobj.c
- $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-varobj.c
- $(POSTCOMPILE)
-
-gdbtk-wrapper.o: $(srcdir)/gdbtk/generic/gdbtk-wrapper.c
- $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-wrapper.c
- $(POSTCOMPILE)
-
-
-#
-# gdb/mi/ dependencies
-#
-# Need to explicitly specify the compile rule as make will do nothing
-# or try to compile the object file into the sub-directory.
-
-mi-cmd-break.o: $(srcdir)/mi/mi-cmd-break.c
- $(COMPILE) $(srcdir)/mi/mi-cmd-break.c
- $(POSTCOMPILE)
-
-mi-cmd-catch.o: $(srcdir)/mi/mi-cmd-catch.c
- $(COMPILE) $(srcdir)/mi/mi-cmd-catch.c
- $(POSTCOMPILE)
-
-mi-cmd-disas.o: $(srcdir)/mi/mi-cmd-disas.c
- $(COMPILE) $(srcdir)/mi/mi-cmd-disas.c
- $(POSTCOMPILE)
-
-mi-cmd-env.o: $(srcdir)/mi/mi-cmd-env.c
- $(COMPILE) $(srcdir)/mi/mi-cmd-env.c
- $(POSTCOMPILE)
-
-mi-cmd-file.o: $(srcdir)/mi/mi-cmd-file.c
- $(COMPILE) $(srcdir)/mi/mi-cmd-file.c
- $(POSTCOMPILE)
-
-mi-cmd-info.o: $(srcdir)/mi/mi-cmd-info.c
- $(COMPILE) $(srcdir)/mi/mi-cmd-info.c
- $(POSTCOMPILE)
-
-mi-cmds.o: $(srcdir)/mi/mi-cmds.c
- $(COMPILE) $(srcdir)/mi/mi-cmds.c
- $(POSTCOMPILE)
-
-mi-cmd-stack.o: $(srcdir)/mi/mi-cmd-stack.c
- $(COMPILE) $(srcdir)/mi/mi-cmd-stack.c
- $(POSTCOMPILE)
-
-mi-cmd-target.o: $(srcdir)/mi/mi-cmd-target.c
- $(COMPILE) $(srcdir)/mi/mi-cmd-target.c
- $(POSTCOMPILE)
-
-mi-cmd-var.o: $(srcdir)/mi/mi-cmd-var.c
- $(COMPILE) $(srcdir)/mi/mi-cmd-var.c
- $(POSTCOMPILE)
-
-mi-console.o: $(srcdir)/mi/mi-console.c
- $(COMPILE) $(srcdir)/mi/mi-console.c
- $(POSTCOMPILE)
-
-mi-getopt.o: $(srcdir)/mi/mi-getopt.c
- $(COMPILE) $(srcdir)/mi/mi-getopt.c
- $(POSTCOMPILE)
-
-mi-interp.o: $(srcdir)/mi/mi-interp.c
- $(COMPILE) $(srcdir)/mi/mi-interp.c
- $(POSTCOMPILE)
-
-mi-main.o: $(srcdir)/mi/mi-main.c
- $(COMPILE) $(srcdir)/mi/mi-main.c
- $(POSTCOMPILE)
-
-mi-out.o: $(srcdir)/mi/mi-out.c
- $(COMPILE) $(srcdir)/mi/mi-out.c
- $(POSTCOMPILE)
-
-mi-parse.o: $(srcdir)/mi/mi-parse.c
- $(COMPILE) $(srcdir)/mi/mi-parse.c
- $(POSTCOMPILE)
-
-mi-symbol-cmds.o: $(srcdir)/mi/mi-symbol-cmds.c
- $(COMPILE) $(srcdir)/mi/mi-symbol-cmds.c
- $(POSTCOMPILE)
-
-mi-common.o: $(srcdir)/mi/mi-common.c
- $(COMPILE) $(srcdir)/mi/mi-common.c
- $(POSTCOMPILE)
-
-# gdb/common/ dependencies
-#
-# Need to explicitly specify the compile rule as make will do nothing
-# or try to compile the object file into the sub-directory.
-
-signals.o: $(srcdir)/common/signals.c
- $(COMPILE) $(srcdir)/common/signals.c
- $(POSTCOMPILE)
-
-common-utils.o: ${srcdir}/common/common-utils.c
- $(COMPILE) $(srcdir)/common/common-utils.c
- $(POSTCOMPILE)
-
-gdb_vecs.o: ${srcdir}/common/gdb_vecs.c
- $(COMPILE) $(srcdir)/common/gdb_vecs.c
- $(POSTCOMPILE)
-
-xml-utils.o: ${srcdir}/common/xml-utils.c
- $(COMPILE) $(srcdir)/common/xml-utils.c
- $(POSTCOMPILE)
-
-ptid.o: ${srcdir}/common/ptid.c
- $(COMPILE) $(srcdir)/common/ptid.c
- $(POSTCOMPILE)
-
-buffer.o: ${srcdir}/common/buffer.c
- $(COMPILE) $(srcdir)/common/buffer.c
- $(POSTCOMPILE)
-
-filestuff.o: $(srcdir)/common/filestuff.c
- $(COMPILE) $(srcdir)/common/filestuff.c
- $(POSTCOMPILE)
-
-format.o: ${srcdir}/common/format.c
- $(COMPILE) $(srcdir)/common/format.c
- $(POSTCOMPILE)
-
-common-agent.o: $(srcdir)/common/agent.c
- $(COMPILE) $(srcdir)/common/agent.c
- $(POSTCOMPILE)
-
-vec.o: ${srcdir}/common/vec.c
- $(COMPILE) $(srcdir)/common/vec.c
- $(POSTCOMPILE)
-
-print-utils.o: ${srcdir}/common/print-utils.c
- $(COMPILE) $(srcdir)/common/print-utils.c
- $(POSTCOMPILE)
-
-rsp-low.o: ${srcdir}/common/rsp-low.c
- $(COMPILE) $(srcdir)/common/rsp-low.c
- $(POSTCOMPILE)
-
-errors.o: ${srcdir}/common/errors.c
- $(COMPILE) $(srcdir)/common/errors.c
- $(POSTCOMPILE)
-
-common-debug.o: ${srcdir}/common/common-debug.c
- $(COMPILE) $(srcdir)/common/common-debug.c
- $(POSTCOMPILE)
-
-cleanups.o: ${srcdir}/common/cleanups.c
- $(COMPILE) $(srcdir)/common/cleanups.c
- $(POSTCOMPILE)
-
-common-exceptions.o: ${srcdir}/common/common-exceptions.c
- $(COMPILE) $(srcdir)/common/common-exceptions.c
- $(POSTCOMPILE)
-
-posix-strerror.o: ${srcdir}/common/posix-strerror.c
- $(COMPILE) $(srcdir)/common/posix-strerror.c
- $(POSTCOMPILE)
-
-mingw-strerror.o: ${srcdir}/common/mingw-strerror.c
- $(COMPILE) $(srcdir)/common/mingw-strerror.c
- $(POSTCOMPILE)
-
-btrace-common.o: ${srcdir}/common/btrace-common.c
- $(COMPILE) $(srcdir)/common/btrace-common.c
- $(POSTCOMPILE)
-
-fileio.o: ${srcdir}/common/fileio.c
- $(COMPILE) $(srcdir)/common/fileio.c
- $(POSTCOMPILE)
-
-common-regcache.o: ${srcdir}/common/common-regcache.c
- $(COMPILE) $(srcdir)/common/common-regcache.c
- $(POSTCOMPILE)
-
-signals-state-save-restore.o: $(srcdir)/common/signals-state-save-restore.c
- $(COMPILE) $(srcdir)/common/signals-state-save-restore.c
- $(POSTCOMPILE)
-
-new-op.o: ${srcdir}/common/new-op.c
- $(COMPILE) $(srcdir)/common/new-op.c
- $(POSTCOMPILE)
-
-#
-# gdb/target/ dependencies
-#
-# Need to explicitly specify the compile rule as make will do nothing
-# or try to compile the object file into the sub-directory.
-
-waitstatus.o: ${srcdir}/target/waitstatus.c
- $(COMPILE) $(srcdir)/target/waitstatus.c
- $(POSTCOMPILE)
-
-#
-# gdb/arch/ dependencies
-#
-# Need to explicitly specify the compile rule as make will do nothing
-# or try to compile the object file into the sub-directory.
-
-arm.o: ${srcdir}/arch/arm.c
- $(COMPILE) $(srcdir)/arch/arm.c
- $(POSTCOMPILE)
-
-arm-linux.o: ${srcdir}/arch/arm-linux.c
- $(COMPILE) $(srcdir)/arch/arm-linux.c
- $(POSTCOMPILE)
-
-arm-get-next-pcs.o: ${srcdir}/arch/arm-get-next-pcs.c
- $(COMPILE) $(srcdir)/arch/arm-get-next-pcs.c
- $(POSTCOMPILE)
-
-# gdb/nat/ dependencies
-#
-# Need to explicitly specify the compile rule as make will do nothing
-# or try to compile the object file into the sub-directory.
-
-x86-dregs.o: ${srcdir}/nat/x86-dregs.c
- $(COMPILE) $(srcdir)/nat/x86-dregs.c
- $(POSTCOMPILE)
-
-linux-btrace.o: ${srcdir}/nat/linux-btrace.c
- $(COMPILE) $(srcdir)/nat/linux-btrace.c
- $(POSTCOMPILE)
-
-linux-osdata.o: ${srcdir}/nat/linux-osdata.c
- $(COMPILE) $(srcdir)/nat/linux-osdata.c
- $(POSTCOMPILE)
-
-linux-procfs.o: $(srcdir)/nat/linux-procfs.c
- $(COMPILE) $(srcdir)/nat/linux-procfs.c
- $(POSTCOMPILE)
-
-linux-ptrace.o: $(srcdir)/nat/linux-ptrace.c
- $(COMPILE) $(srcdir)/nat/linux-ptrace.c
- $(POSTCOMPILE)
-
-linux-waitpid.o: ${srcdir}/nat/linux-waitpid.c
- $(COMPILE) $(srcdir)/nat/linux-waitpid.c
- $(POSTCOMPILE)
-
-mips-linux-watch.o: ${srcdir}/nat/mips-linux-watch.c
- $(COMPILE) $(srcdir)/nat/mips-linux-watch.c
- $(POSTCOMPILE)
-
-ppc-linux.o: ${srcdir}/nat/ppc-linux.c
- $(COMPILE) $(srcdir)/nat/ppc-linux.c
- $(POSTCOMPILE)
-
-linux-personality.o: ${srcdir}/nat/linux-personality.c
- $(COMPILE) $(srcdir)/nat/linux-personality.c
- $(POSTCOMPILE)
-
-x86-linux.o: ${srcdir}/nat/x86-linux.c
- $(COMPILE) $(srcdir)/nat/x86-linux.c
- $(POSTCOMPILE)
-
-x86-linux-dregs.o: ${srcdir}/nat/x86-linux-dregs.c
- $(COMPILE) $(srcdir)/nat/x86-linux-dregs.c
- $(POSTCOMPILE)
-
-amd64-linux-siginfo.o: ${srcdir}/nat/amd64-linux-siginfo.c
- $(COMPILE) $(srcdir)/nat/amd64-linux-siginfo.c
- $(POSTCOMPILE)
-
-linux-namespaces.o: ${srcdir}/nat/linux-namespaces.c
- $(COMPILE) $(srcdir)/nat/linux-namespaces.c
- $(POSTCOMPILE)
-
-aarch64-linux-hw-point.o: ${srcdir}/nat/aarch64-linux-hw-point.c
- $(COMPILE) $(srcdir)/nat/aarch64-linux-hw-point.c
- $(POSTCOMPILE)
-
-aarch64-linux.o: ${srcdir}/nat/aarch64-linux.c
- $(COMPILE) $(srcdir)/nat/aarch64-linux.c
- $(POSTCOMPILE)
-
-# gdb/arch/ dependencies
-#
-# Need to explicitly specify the compile rule as make will do nothing
-# or try to compile the object file into the sub-directory.
-
-aarch64-insn.o: ${srcdir}/arch/aarch64-insn.c
- $(COMPILE) $(srcdir)/arch/aarch64-insn.c
- $(POSTCOMPILE)
-
-#
-# gdb/tui/ dependencies
-#
-# Need to explicitly specify the compile rule as make will do nothing
-# or try to compile the object file into the sub-directory.
-
-tui.o: $(srcdir)/tui/tui.c
- $(COMPILE) $(srcdir)/tui/tui.c
- $(POSTCOMPILE)
-
-tui-command.o: $(srcdir)/tui/tui-command.c
- $(COMPILE) $(srcdir)/tui/tui-command.c
- $(POSTCOMPILE)
-
-tui-data.o: $(srcdir)/tui/tui-data.c
- $(COMPILE) $(srcdir)/tui/tui-data.c
- $(POSTCOMPILE)
-
-tui-disasm.o: $(srcdir)/tui/tui-disasm.c
- $(COMPILE) $(srcdir)/tui/tui-disasm.c
- $(POSTCOMPILE)
-
-tui-file.o: $(srcdir)/tui/tui-file.c
- $(COMPILE) $(srcdir)/tui/tui-file.c
- $(POSTCOMPILE)
-
-tui-hooks.o: $(srcdir)/tui/tui-hooks.c
- $(COMPILE) $(srcdir)/tui/tui-hooks.c
- $(POSTCOMPILE)
-
-tui-interp.o: $(srcdir)/tui/tui-interp.c
- $(COMPILE) $(srcdir)/tui/tui-interp.c
- $(POSTCOMPILE)
-
-tui-io.o: $(srcdir)/tui/tui-io.c
- $(COMPILE) $(srcdir)/tui/tui-io.c
- $(POSTCOMPILE)
-
-tui-layout.o: $(srcdir)/tui/tui-layout.c
- $(COMPILE) $(srcdir)/tui/tui-layout.c
- $(POSTCOMPILE)
-
-tui-out.o: $(srcdir)/tui/tui-out.c
- $(COMPILE) $(srcdir)/tui/tui-out.c
- $(POSTCOMPILE)
-
-tui-regs.o: $(srcdir)/tui/tui-regs.c
- $(COMPILE) $(srcdir)/tui/tui-regs.c
- $(POSTCOMPILE)
-
-tui-source.o: $(srcdir)/tui/tui-source.c
- $(COMPILE) $(srcdir)/tui/tui-source.c
- $(POSTCOMPILE)
-
-tui-stack.o: $(srcdir)/tui/tui-stack.c
- $(COMPILE) $(srcdir)/tui/tui-stack.c
- $(POSTCOMPILE)
-
-tui-win.o: $(srcdir)/tui/tui-win.c
- $(COMPILE) $(srcdir)/tui/tui-win.c
- $(POSTCOMPILE)
-
-tui-windata.o: $(srcdir)/tui/tui-windata.c
- $(COMPILE) $(srcdir)/tui/tui-windata.c
- $(POSTCOMPILE)
-
-tui-wingeneral.o: $(srcdir)/tui/tui-wingeneral.c
- $(COMPILE) $(srcdir)/tui/tui-wingeneral.c
- $(POSTCOMPILE)
-
-tui-winsource.o: $(srcdir)/tui/tui-winsource.c
- $(COMPILE) $(srcdir)/tui/tui-winsource.c
- $(POSTCOMPILE)
-
-# gdb/guile dependencies
-#
-# Need to explicitly specify the compile rule as make will do nothing
-# or try to compile the object file into the sub-directory.
-
-guile.o: $(srcdir)/guile/guile.c
- $(COMPILE) $(srcdir)/guile/guile.c
- $(POSTCOMPILE)
-
-scm-arch.o: $(srcdir)/guile/scm-arch.c
- $(COMPILE) $(srcdir)/guile/scm-arch.c
- $(POSTCOMPILE)
-
-scm-auto-load.o: $(srcdir)/guile/scm-auto-load.c
- $(COMPILE) $(srcdir)/guile/scm-auto-load.c
- $(POSTCOMPILE)
-
-scm-block.o: $(srcdir)/guile/scm-block.c
- $(COMPILE) $(srcdir)/guile/scm-block.c
- $(POSTCOMPILE)
-
-scm-breakpoint.o: $(srcdir)/guile/scm-breakpoint.c
- $(COMPILE) $(srcdir)/guile/scm-breakpoint.c
- $(POSTCOMPILE)
-
-scm-cmd.o: $(srcdir)/guile/scm-cmd.c
- $(COMPILE) $(srcdir)/guile/scm-cmd.c
- $(POSTCOMPILE)
-
-scm-disasm.o: $(srcdir)/guile/scm-disasm.c
- $(COMPILE) $(srcdir)/guile/scm-disasm.c
- $(POSTCOMPILE)
-
-scm-exception.o: $(srcdir)/guile/scm-exception.c
- $(COMPILE) $(srcdir)/guile/scm-exception.c
- $(POSTCOMPILE)
-
-scm-frame.o: $(srcdir)/guile/scm-frame.c
- $(COMPILE) $(srcdir)/guile/scm-frame.c
- $(POSTCOMPILE)
-
-scm-gsmob.o: $(srcdir)/guile/scm-gsmob.c
- $(COMPILE) $(srcdir)/guile/scm-gsmob.c
- $(POSTCOMPILE)
-
-scm-iterator.o: $(srcdir)/guile/scm-iterator.c
- $(COMPILE) $(srcdir)/guile/scm-iterator.c
- $(POSTCOMPILE)
-
-scm-lazy-string.o: $(srcdir)/guile/scm-lazy-string.c
- $(COMPILE) $(srcdir)/guile/scm-lazy-string.c
- $(POSTCOMPILE)
-
-scm-math.o: $(srcdir)/guile/scm-math.c
- $(COMPILE) $(srcdir)/guile/scm-math.c
- $(POSTCOMPILE)
-
-scm-objfile.o: $(srcdir)/guile/scm-objfile.c
- $(COMPILE) $(srcdir)/guile/scm-objfile.c
- $(POSTCOMPILE)
-
-scm-param.o: $(srcdir)/guile/scm-param.c
- $(COMPILE) $(srcdir)/guile/scm-param.c
- $(POSTCOMPILE)
-
-scm-ports.o: $(srcdir)/guile/scm-ports.c
- $(COMPILE) $(srcdir)/guile/scm-ports.c
- $(POSTCOMPILE)
-
-scm-pretty-print.o: $(srcdir)/guile/scm-pretty-print.c
- $(COMPILE) $(srcdir)/guile/scm-pretty-print.c
- $(POSTCOMPILE)
-
-scm-progspace.o: $(srcdir)/guile/scm-progspace.c
- $(COMPILE) $(srcdir)/guile/scm-progspace.c
- $(POSTCOMPILE)
-
-scm-safe-call.o: $(srcdir)/guile/scm-safe-call.c
- $(COMPILE) $(srcdir)/guile/scm-safe-call.c
- $(POSTCOMPILE)
-
-scm-string.o: $(srcdir)/guile/scm-string.c
- $(COMPILE) $(srcdir)/guile/scm-string.c
- $(POSTCOMPILE)
-
-scm-symbol.o: $(srcdir)/guile/scm-symbol.c
- $(COMPILE) $(srcdir)/guile/scm-symbol.c
- $(POSTCOMPILE)
-
-scm-symtab.o: $(srcdir)/guile/scm-symtab.c
- $(COMPILE) $(srcdir)/guile/scm-symtab.c
- $(POSTCOMPILE)
-
-scm-type.o: $(srcdir)/guile/scm-type.c
- $(COMPILE) $(srcdir)/guile/scm-type.c
- $(POSTCOMPILE)
-
-scm-utils.o: $(srcdir)/guile/scm-utils.c
- $(COMPILE) $(srcdir)/guile/scm-utils.c
- $(POSTCOMPILE)
-
-scm-value.o: $(srcdir)/guile/scm-value.c
- $(COMPILE) $(srcdir)/guile/scm-value.c
- $(POSTCOMPILE)
-
-# gdb/python/ dependencies
-#
-# Need to explicitly specify the compile rule as make will do nothing
-# or try to compile the object file into the sub-directory.
-
-# Flags needed to compile Python code
-PYTHON_CFLAGS=@PYTHON_CFLAGS@
-
-python.o: $(srcdir)/python/python.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/python.c
- $(POSTCOMPILE)
-
-py-arch.o: $(srcdir)/python/py-arch.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-arch.c
- $(POSTCOMPILE)
-
-py-auto-load.o: $(srcdir)/python/py-auto-load.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-auto-load.c
- $(POSTCOMPILE)
-
-py-block.o: $(srcdir)/python/py-block.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-block.c
- $(POSTCOMPILE)
-
-py-bpevent.o: $(srcdir)/python/py-bpevent.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-bpevent.c
- $(POSTCOMPILE)
-
-py-breakpoint.o: $(srcdir)/python/py-breakpoint.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-breakpoint.c
- $(POSTCOMPILE)
-
-py-cmd.o: $(srcdir)/python/py-cmd.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-cmd.c
- $(POSTCOMPILE)
-
-py-continueevent.o: $(srcdir)/python/py-continueevent.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-continueevent.c
- $(POSTCOMPILE)
-
-py-xmethods.o: $(srcdir)/python/py-xmethods.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-xmethods.c
- $(POSTCOMPILE)
-
-py-event.o: $(srcdir)/python/py-event.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-event.c
- $(POSTCOMPILE)
-
-py-evtregistry.o: $(srcdir)/python/py-evtregistry.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-evtregistry.c
- $(POSTCOMPILE)
-
-py-evts.o: $(srcdir)/python/py-evts.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-evts.c
- $(POSTCOMPILE)
-
-py-exitedevent.o: $(srcdir)/python/py-exitedevent.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-exitedevent.c
- $(POSTCOMPILE)
-
-py-finishbreakpoint.o: $(srcdir)/python/py-finishbreakpoint.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-finishbreakpoint.c
- $(POSTCOMPILE)
-
-py-frame.o: $(srcdir)/python/py-frame.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-frame.c
- $(POSTCOMPILE)
-
-py-framefilter.o: $(srcdir)/python/py-framefilter.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-framefilter.c
- $(POSTCOMPILE)
-
-py-function.o: $(srcdir)/python/py-function.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-function.c
- $(POSTCOMPILE)
-
-py-gdb-readline.o: $(srcdir)/python/py-gdb-readline.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-gdb-readline.c
- $(POSTCOMPILE)
-
-py-inferior.o: $(srcdir)/python/py-inferior.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-inferior.c
- $(POSTCOMPILE)
-
-py-infevents.o: $(srcdir)/python/py-infevents.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-infevents.c
- $(POSTCOMPILE)
-
-py-infthread.o: $(srcdir)/python/py-infthread.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-infthread.c
- $(POSTCOMPILE)
-
-py-lazy-string.o: $(srcdir)/python/py-lazy-string.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-lazy-string.c
- $(POSTCOMPILE)
-
-py-linetable.o: $(srcdir)/python/py-linetable.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-linetable.c
- $(POSTCOMPILE)
-
-py-newobjfileevent.o: $(srcdir)/python/py-newobjfileevent.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-newobjfileevent.c
- $(POSTCOMPILE)
-
-py-objfile.o: $(srcdir)/python/py-objfile.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-objfile.c
- $(POSTCOMPILE)
-
-py-param.o: $(srcdir)/python/py-param.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-param.c
- $(POSTCOMPILE)
-
-py-prettyprint.o: $(srcdir)/python/py-prettyprint.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-prettyprint.c
- $(POSTCOMPILE)
-
-py-progspace.o: $(srcdir)/python/py-progspace.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-progspace.c
- $(POSTCOMPILE)
-
-py-signalevent.o: $(srcdir)/python/py-signalevent.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-signalevent.c
- $(POSTCOMPILE)
-
-py-stopevent.o: $(srcdir)/python/py-stopevent.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-stopevent.c
- $(POSTCOMPILE)
-
-py-symbol.o: $(srcdir)/python/py-symbol.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-symbol.c
- $(POSTCOMPILE)
-
-py-symtab.o: $(srcdir)/python/py-symtab.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-symtab.c
- $(POSTCOMPILE)
-
-py-threadevent.o: $(srcdir)/python/py-threadevent.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-threadevent.c
- $(POSTCOMPILE)
-
-py-type.o: $(srcdir)/python/py-type.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-type.c
- $(POSTCOMPILE)
-
-py-unwind.o: $(srcdir)/python/py-unwind.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-unwind.c
- $(POSTCOMPILE)
-
-py-utils.o: $(srcdir)/python/py-utils.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-utils.c
- $(POSTCOMPILE)
-
-py-value.o: $(srcdir)/python/py-value.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-value.c
- $(POSTCOMPILE)
-
-py-varobj.o: $(srcdir)/python/py-varobj.c
- $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-varobj.c
- $(POSTCOMPILE)
-
#
# Dependency tracking.
#