Remove/retain old ARC stuff as appropriate

5 files changed, 5 insertions, 1071 deletions

diff --git a/gdb/.Sanitize b/gdb/.Sanitize
index 0f98cb8..5adcd95 100644
--- a/gdb/.Sanitize
+++ b/gdb/.Sanitize
@@ -15,20 +15,6 @@
 
 Do-first:
 
-arc_files="arc-tdep.c remote-arc.c"
-
-if ( echo $* | grep keep\-arc > /dev/null ) ; then
-	keep_these_too="${arc_files} ${keep_these_too}"
-	if [ -n "${verbose}" ] ; then
-		echo Keeping ${arc_files}
-	fi
-else
-	lose_these_too="${arc_files} ${lose_these_too}"
-	if [ -n "${verbose}" ] ; then
-		echo Deleting ${arc_files}
-	fi
-fi
-
 gdbtk_files="README.GDBTK gdbtk.c gdbtcl gdbtcl2 gdbtk.tcl"
 
 if ( echo $* | grep lose\-gdbtk > /dev/null ) ; then
@@ -120,6 +106,7 @@ alpha-tdep.c
 altos-xdep.c
 annotate.c
 annotate.h
+arc-tdep.c
 arm-convert.s
 arm-tdep.c
 arm-xdep.c
@@ -478,35 +465,6 @@ else
 	done
 fi
 
-arc_files="configure.tgt ChangeLog-95"
-
-if ( echo $* | grep keep\-arc > /dev/null ) ; then
-	for i in $arc_files ; do
-		if test ! -d $i && (grep sanitize-arc $i > /dev/null) ; then
-			if [ -n "${verbose}" ] ; then
-				echo Keeping arc stuff in $i
-			fi
-		fi
-	done
-else
-	for i in $arc_files ; do
-		if test ! -d $i && (grep sanitize-arc $i > /dev/null) ; then
-			if [ -n "${verbose}" ] ; then
-				echo Removing traces of \"arc\" from $i...
-			fi
-			cp $i new
-			sed '/start\-sanitize\-arc/,/end-\sanitize\-arc/d' < $i > new
-			if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
-				if [ -n "${verbose}" ] ; then
-					echo Caching $i in .Recover...
-				fi
-				mv $i .Recover
-			fi
-			mv new $i
-		fi
-	done
-fi
-
 if ( echo $* | grep keep\-gm > /dev/null ) ; then
 	for i in * ; do
 		if test ! -d $i && (grep sanitize-gm $i > /dev/null) ; then
diff --git a/gdb/ChangeLog-95 b/gdb/ChangeLog-95
index 13c73c7..50d23d2 100644
--- a/gdb/ChangeLog-95
+++ b/gdb/ChangeLog-95
@@ -1878,7 +1878,7 @@ Tue Aug  1 11:44:53 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
 	inflow.c, infptrace.c, infrun.c, irix5-nat.c, language.c,
 	m2-typeprint.c, main.c, mdebugread.c, minsyms.c, mipsread.c,
 	monitor.c, nlmread.c, objfiles.c, os9kread.c, osfsolib.c, parse.c,
-	printcmd.c, procfs.c, regex.c, remote-adapt.c, remote-arc.c,
+	printcmd.c, procfs.c, regex.c, remote-adapt.c,
 	remote-array.c, remote-bug.c, remote-e7000.c, remote-eb.c,
 	remote-es.c, remote-hms.c, remote-mm.c, remote-os9k.c,
 	remote-pa.c, remote-sim.c, remote-st.c, remote-udi.c,
@@ -2301,7 +2301,6 @@ Thu Jul 13 13:42:38 1995  Jeffrey A. Law  <law@rtl.cygnus.com>
 	* m3-nat.c (m3_ops): Likewise.
 	* monitor.c (monitor_ops): Likewise.
 	* procfs.c (procfs_ops): Likewise.
-	* remote-arc.c (arc_ops): Likewise.
 	* remote-array.c (array_ops): Likewise.
 	* remote-e7000.c (e7000_ops): Likewise.
 	* remote-es.c (es1800_ops, es1800_child_ops): Likewise.
@@ -2631,7 +2630,6 @@ Sat Jun  3 01:54:56 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
 	* value.h (struct value):  Change `repetitions' field from
 	`short' to `int' type.
 
-start-sanitize-arc
 Fri Jun  2 11:17:23 1995  Doug Evans  <dje@canuck.cygnus.com>
 
 	* arc-tdep.c (arc_bfd_mach_type): New static global.
@@ -2642,7 +2640,6 @@ Fri Jun  2 11:17:23 1995  Doug Evans  <dje@canuck.cygnus.com>
 	(arc_print_insn): New function.
 	(arc_set_cpu_type): Set arc_bfd_mach_type.  Don't set tm_print_insn.
 	(_initialize_arc_tdep): Set tm_print_insn to arc_print_insn.
-end-sanitize-arc
 
 Wed May 31 12:04:01 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
 
@@ -2982,9 +2979,7 @@ Tue May  2 18:32:24 1995  Stan Shebs  <shebs@andros.cygnus.com>
 	* remote-nrom.c: New file, NetROM target support.
 	* config/a29k/a29k-udi.mt, config/i960/vxworks960.mt: Use
 	REMOTE_OBS instead of REMOTE_O.
-start-sanitize-arc
 	* config/arc/arc.mt: Ditto.
-end-sanitize-arc	
 
 Fri Apr 28 23:30:00 1995  Stu Grossman  (grossman@cygnus.com)
 
@@ -3167,7 +3162,6 @@ Wed Apr 12 14:34:31 1995  Jim Kingdon  <kingdon@deneb.cygnus.com>
 	* xcoffread.c: Call complain() rather than error() or printing a
 	warning.
 
-start-sanitize-arc
 Wed Apr 12 08:15:27 1995  Doug Evans  <dje@canuck.cygnus.com>
 
 	* arc-tdep.c: #include "gdbcmd.h".
@@ -3190,10 +3184,6 @@ Wed Apr 12 08:15:27 1995  Doug Evans  <dje@canuck.cygnus.com>
 	(arc_set_cpu_type): New function.
 	(_initialize_arc_tdep): Define new `set' commands `cpu',
 	`displaypipeline', and `debugpipeline'.
-	* remote-arc.c (break_insn): Add bi-endian support.
-	(arc_insert_breakpoint): Likewise.
-	(arc_remove_breakpoint): Likewise.
-	(switch_command): Delete.
 	* arc/tm-arc.h (TARGET_BYTE_ORDER): Delete.
 	(TARGET_BYTE_ORDER_SELECTABLE): Define.
 	(DEFAULT_ARC_CPU_TYPE): Define.
@@ -3207,7 +3197,6 @@ Wed Apr 12 08:15:27 1995  Doug Evans  <dje@canuck.cygnus.com>
 	(NUM_REGS, REGISTER_BYTES): Fix.
 	(FRAME_SAVED_PC): Call arc_frame_saved_pc.
 	(FRAME_LOCALS_ADDRESS): Fix.
-end-sanitize-arc
 
 Tue Apr 11 16:42:37 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
 
@@ -3822,11 +3811,9 @@ Mon Mar 13 15:25:47 1995  Jim Kingdon  <kingdon@deneb.cygnus.com>
 	* alpha-tdep.c (find_proc_desc): If pdr.framereg field is -1, don't
 	use the PDR, just examine prologues instead.
 
-start-sanitize-arc
 Fri Mar 10 16:13:18 1995  Kung Hsu  <kung@mexican.cygnus.com>
 
-	* config/tm-arc.h: Change arc register names.
-end-sanitize-arc
+	* config/arc/tm-arc.h: Change arc register names.
 
 Fri Mar 10 02:49:40 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
 
@@ -4085,14 +4072,8 @@ Tue Feb 28 14:38:39 1995  Kung Hsu  <kung@mexican.cygnus.com>
 
 	* defs.h (SWAP_TARGET_AND_HOST): check endianess at runtime not
 	compile time.
-
-start-sanitize-arc
 	* arc-tdep.c (_initialize_arc_tdep): set tm_print_insn according to 
 	processor.
-	* remote-arc.c (arc_wait): when a processor stops, stop other two
-	processors too.
-	* remote-arc.c (switch_command): switch tm_print_insn.
-end-sanitize-arc
 
 	* vx-share/ptrace.h: merge in WRS new ptrace requests.
 
@@ -4375,9 +4356,7 @@ Mon Feb  6 18:50:59 1995  Stan Shebs  <shebs@andros.cygnus.com>
 
 	* i386-tdep.c (_initialize_i386_tdep): Put void decl on separate
         line, so init.c generation works correctly.
-start-sanitize-arc
 	* arc-tdep.c (_initialize_arc_tdep): Ditto.
-end-sanitize-arc
 
 Mon Feb  6 14:44:36 1995  Rob Savoye  <rob@darkstar.cygnus.com>
 
@@ -4431,15 +4410,11 @@ Thu Feb  2 19:02:45 1995  Rob Savoye  <rob@darkstar.cygnus.com>
 
 Thu Feb  2 16:11:04 1995  Kung Hsu  <kung@mexican.cygnus.com>
 
-start-sanitize-arc
 	* config/arc/arc.mt: new target makefile for arc processor.
 	* config/arc/tm-arc.h: new target header for arc processor.
 	* config/arc/go32.mh: new go32 host makefile for arc processor.
 	* config/arc/xm-go32.h: new go32 host header for arc processor.
 	* arc-tdep.c: new target dependent codes for arc processor.
-	* remote-arc.c: new file for arc-specific protocol through
-	parallel line.
-end-sanitize-arc
 	* ser-go32-para.c: new file for go32 parallel port communication.
 
 Thu Feb  2 13:58:40 1995  Stan Shebs  <shebs@andros.cygnus.com>
diff --git a/gdb/config/arc/arc.mt b/gdb/config/arc/arc.mt
index cf4284e..8ee8c3d 100644
--- a/gdb/config/arc/arc.mt
+++ b/gdb/config/arc/arc.mt
@@ -1,8 +1,3 @@
-# Target: arc processor
-TDEPFILES = arc-tdep.o remote-arc.o
+# Target: ARC processor
+TDEPFILES = arc-tdep.o
 TM_FILE = tm-arc.h
-
-REMOTE_OBS = dcache.o remote-utils.o # remote-sim.o
-
-# This isn't supported yet and prevents gdb from building.
-#SER_HARDWIRE= ser-go32-para.o
diff --git a/gdb/configure.tgt b/gdb/configure.tgt
index 9ece51f..ad17d88 100644
--- a/gdb/configure.tgt
+++ b/gdb/configure.tgt
@@ -45,9 +45,7 @@ a29k-*-vxworks*)        gdb_target=vx29k ;;
 alpha-*-osf*)		gdb_target=alpha-osf1 ;;
 alpha-*-linux*)		gdb_target=alpha-linux ;;
 
-# start-sanitize-arc
 arc-*-*)		gdb_target=arc ;;
-# end-sanitize-arc
 
 arm-*-*)		gdb_target=arm ;;
 
diff --git a/gdb/remote-arc.c b/gdb/remote-arc.c
deleted file mode 100644
index ede95ad..0000000
--- a/gdb/remote-arc.c
+++ /dev/null
@@ -1,992 +0,0 @@
-/* Remote target communications for the ARC
-   Copyright 1995, 1997 Free Software Foundation, Inc.
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#include "defs.h"
-#include "gdb_string.h"
-#include <fcntl.h>
-#include "frame.h"
-#include "inferior.h"
-#include "bfd.h"
-#include "symfile.h"
-#include "target.h"
-#include "wait.h"
-#include "terminal.h"
-#include "gdbcmd.h"
-#include "objfiles.h"
-#include "gdb-stabs.h"
-
-#include "dcache.h"
-
-#ifdef USG
-#include <sys/types.h>
-#endif
-
-#include <signal.h>
-#include "serial.h"
-
-/* Prototypes for local functions */
-
-static int
-arc_write_bytes PARAMS ((CORE_ADDR memaddr, unsigned char *myaddr, int len));
-
-static int
-arc_read_bytes PARAMS ((CORE_ADDR memaddr, unsigned char *myaddr, int len));
-
-static void
-arc_files_info PARAMS ((struct target_ops *ignore));
-
-static int
-arc_xfer_memory PARAMS ((CORE_ADDR memaddr, char *myaddr, int len,
-			    int should_write, struct target_ops *target));
-
-static void
-arc_xfer_cntlreg PARAMS ((int rw, unsigned char *data));
-
-static void 
-arc_prepare_to_store PARAMS ((void));
-
-static void
-arc_fetch_registers PARAMS ((int regno));
-
-static void
-arc_resume PARAMS ((int pid, int step, enum target_signal siggnal));
-
-static int
-arc_start_remote PARAMS ((char *dummy));
-
-static void
-arc_open PARAMS ((char *name, int from_tty));
-
-static void
-arc_close PARAMS ((int quitting));
-
-static void
-arc_store_registers PARAMS ((int regno));
-
-static void
-getpkt PARAMS ((char *buf, int len));
-
-static int
-putpkt PARAMS ((char *buf, int len));
-
-static int arc_wait PARAMS ((int pid, struct target_waitstatus *status));
-
-static void
-arc_detach PARAMS ((char *args, int from_tty));
-
-static void
-arc_interrupt PARAMS ((int signo));
-
-static void
-arc_interrupt_twice PARAMS ((int signo));
-
-static void
-interrupt_query PARAMS ((void));
-
-extern struct target_ops arc_ops;	/* Forward decl */
-
-static int aux_reg_map[3][31] = AUX_REG_MAP;
-
-/* This was 5 seconds, which is a long time to sit and wait.
-   Unless this is going though some terminal server or multiplexer or
-   other form of hairy serial connection, I would think 2 seconds would
-   be plenty.  */
-static int remote_timeout = 2;
-
-#if 0
-int icache;
-#endif
-
-/* Descriptor for I/O to remote machine.  Initialize it to NULL so that
-   arc_open knows that we don't have a file open when the program
-   starts.  */
-static serial_t arc_desc = NULL;
-
-#define UNUSED1_PROCESSOR 0
-#define UNUSED2_PROCESSOR 1
-#define UNUSED3_PROCESSOR 2
-static unsigned char cntl_reg_halt_bit[3] = { 0x08, 0x10, 0x20 };
-static unsigned char cntl_reg_step_bit[3] = { 0x01, 0x02, 0x04 };
-
-static int curr_processor = UNUSED1_PROCESSOR;
-static unsigned char cntl_reg = 0;
-static unsigned int status_reg = 0;
-
-#define	PBUFSIZ	32
-#define MAXBUFBYTES 32
-
-
-/* Clean up connection to a remote debugger.  */
-
-/* ARGSUSED */
-static void
-arc_close (quitting)
-     int quitting;
-{
-  if (arc_desc)
-    SERIAL_CLOSE (arc_desc);
-  arc_desc = NULL;
-}
-
-static int
-arc_start_remote (dummy)
-     char *dummy;
-{
-  immediate_quit = 1;		/* Allow user to interrupt it */
-  arc_xfer_cntlreg (1, &cntl_reg);
-  immediate_quit = 0;
-
-  start_remote ();		/* Initialize gdb process mechanisms */
-  return 1;
-}
-
-/* Open a connection to a remote debugger.
-   NAME is the filename used for communication.  */
-
-static DCACHE *remote_dcache;
-
-static void
-arc_open (name, from_tty)
-     char *name;
-     int from_tty;
-{
-  if (name == 0)
-    error (
-"To open a arc debug connection, you need to specify what parallel\n\
-device is attached to the remote system.");
-
-  target_preopen (from_tty);
-
-  unpush_target (&arc_ops);
-
-  remote_dcache = dcache_init (arc_read_bytes, arc_write_bytes);
-
-  arc_desc = SERIAL_OPEN (name);
-  if (!arc_desc)
-    perror_with_name (name);
-
-  /* If there is something sitting in the buffer we might take it as a
-     response to a command, which would be bad.  */
-  SERIAL_FLUSH_INPUT (arc_desc);
-
-  if (from_tty)
-    {
-      puts_filtered ("Remote debugging using ");
-      puts_filtered (name);
-      puts_filtered ("\n");
-    }
-  push_target (&arc_ops);	/* Switch to using remote target now */
-
-  /* Without this, some commands which require an active target (such as kill)
-     won't work.  This variable serves (at least) double duty as both the pid
-     of the target process (if it has such), and as a flag indicating that a
-     target is active.  These functions should be split out into seperate
-     variables, especially since GDB will someday have a notion of debugging
-     several processes.  */
-
-  inferior_pid = 42000;
-
-  /* Start the remote connection; if error (0), discard this target.
-     In particular, if the user quits, be sure to discard it
-     (we'd be in an inconsistent state otherwise).  */
-  if (!catch_errors (arc_start_remote, (char *)0, 
-	"Couldn't establish connection to remote target\n", RETURN_MASK_ALL))
-    pop_target();
-}
-
-/* arc_detach()
-   takes a program previously attached to and detaches it.
-   We better not have left any breakpoints
-   in the program or it'll die when it hits one.
-   Close the open connection to the remote debugger.
-   Use this when you want to detach and do something else
-   with your gdb.  */
-
-static void
-arc_detach (args, from_tty)
-     char *args;
-     int from_tty;
-{
-  if (args)
-    error ("Argument given to \"detach\" when remotely debugging.");
-  
-  pop_target ();
-  if (from_tty)
-    puts_filtered ("Ending remote debugging.\n");
-}
-
-/* arc_set_addrreg
-   set addr reg from debug system. */
-
-static void
-arc_set_addrreg (addr)
-     unsigned int addr;
-{
-  unsigned char buf[6] = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0};
-
-  buf[0] = 0x0;
-  buf[4] = addr & 0xff;
-  buf[3] = (addr >> 8) & 0xff;
-  buf[2] = (addr >> 16) & 0xff;
-  buf[1] = (addr >> 24) & 0xff;
-
-  putpkt (buf, 5);
-}
-
-/* arc_xfer_datareg
-   read or write data reg from debug system. */
-
-static void
-arc_xfer_datareg (rw, aux, incr, data)
-     int rw;
-     int aux;
-     int incr;
-     unsigned int *data;
-{
-  unsigned char buf1[6] = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0};
-  unsigned char buf2[5];
-  unsigned int tmp;
-
-  /* read or write data */
-  buf1[0] = (aux ? 0x81 : 0x41);
-  if (incr)
-    buf1[0] += 0x20;
-  if (rw)    /* read */
-    {
-      buf1[0] += 0x10;
-      putpkt (buf1, 1);
-      getpkt (buf2, 4);
-      *data = *(int *)buf2;
-    }
-  else
-    {
-      tmp = *data;
-      buf1[4] = tmp & 0xff;
-      buf1[3] = (tmp >> 8) & 0xff;
-      buf1[2] = (tmp >> 16) & 0xff;
-      buf1[1] = (tmp >> 24) & 0xff;
-      putpkt (buf1, 5);
-    }
-}
-
-/* arc_xfer_cntlreg
-   read or write control reg from debug system. */
-
-static void
-arc_xfer_cntlreg (rw, data)
-     int rw;
-     unsigned char *data;
-{
-  unsigned char buf[3] = {0x0, 0x0, 0x0};
-
-  if (rw)
-    {
-      buf[0] = 0x12;
-      putpkt (buf, 1);
-      getpkt (data, 1);
-    }
-  else
-    {
-      buf[0] = 0x02;
-      buf[1] = *data;
-      putpkt (buf, 2);
-    }
-}
-
-/* arc_xfer_reg
-   read or write a reg to arc processors. */
-
-static void
-arc_xfer_reg (processor, rw, aux, regnum, data)
-     int processor;
-     int rw;
-     int aux;
-     int regnum;
-     unsigned int *data;
-{
-  unsigned int tmp;
-
-  if (processor == UNUSED1_PROCESSOR)
-    {
-      /* write addr (regnum) */
-      arc_set_addrreg (regnum);
-      arc_xfer_datareg (rw, aux, 0, data);
-    }
-  else
-    {
-      /* write addr register (aux r14) */
-      arc_set_addrreg (0xe);
-      tmp = aux ? (regnum | 0x80000000) : regnum;
-      arc_xfer_datareg (0, 1, 0, tmp);
-
-      /* read/write from data reg (aux reg 15/16) */
-      arc_set_addrreg (/*processor == ??? ? 0x10 :*/ 0xf);
-      arc_xfer_datareg (rw, 1, 0, data);
-    }
-}
-
-
-/* Tell the remote machine to resume.  */
-
-static enum target_signal last_sent_signal = TARGET_SIGNAL_0;
-int last_sent_step;
-
-static void
-arc_resume (pid, step, siggnal)
-     int pid, step;
-     enum target_signal siggnal;
-{
-  unsigned int tmp;
-
-  dcache_flush (remote_dcache);
-
-  last_sent_signal = siggnal;
-  last_sent_step = step;
-
-  /* don't know how to handle signal in ARC ***
-  if (siggnal != TARGET_SIGNAL_0)
-    {
-      buf[0] = step ? 'S' : 'C';
-      buf[1] = tohex (((int)siggnal >> 4) & 0xf);
-      buf[2] = tohex ((int)siggnal & 0xf);
-      buf[3] = '\0';
-    }
-  */
-
-  if (step)
-    {
-      /* write the step bit in control reg of debug system */
-      unsigned char tmp_char = cntl_reg | cntl_reg_step_bit[curr_processor];
-      arc_xfer_cntlreg (0, &tmp_char);
-    }
-  else
-    {
-      /* clear the halt bit in the status register */
-      tmp = status_reg | 0x02000000;
-      arc_xfer_reg (curr_processor, 0, 1, 0, &tmp);
-    }
-}
-
-
-static void (*ofunc)();
-
-/* Send to target to halt it. */
-static void
-arc_interrupt (signo)
-     int signo;
-{
-  unsigned char buf[3] = {0x02, 0x0, 0x0};
-  /* If this doesn't work, try more severe steps.  */
-  signal (signo, arc_interrupt_twice);
-  
-  if (remote_debug)
-    printf_unfiltered ("arc_interrupt called\n");
-
-  if (cntl_reg & cntl_reg_halt_bit[curr_processor]) 
-    return;
-
-  buf[1] = cntl_reg | cntl_reg_halt_bit[curr_processor];
-  putpkt (buf, 2);
-  return;  
-}
-
-/* The user typed ^C twice.  */
-static void
-arc_interrupt_twice (signo)
-     int signo;
-{
-  signal (signo, ofunc);
-  
-  interrupt_query ();
-
-  signal (signo, arc_interrupt);
-}
-
-/* Ask the user what to do when an interrupt is received.  */
-
-static void
-interrupt_query ()
-{
-  target_terminal_ours ();
-
-  if (query ("Interrupted while waiting for the program.\n\
-Give up (and stop debugging it)? "))
-    {
-      target_mourn_inferior ();
-      return_to_top_level (RETURN_QUIT);
-    }
-
-  target_terminal_inferior ();
-}
-
-/* If nonzero, ignore the next kill.  */
-int kill_kludge;
-
-/* Wait until the remote machine stops, then return,
-   storing status in STATUS just as `wait' would.
-   Returns "pid" (though it's not clear what, if anything, that
-   means in the case of this target).  */
-
-static int
-arc_wait (pid, status)
-     int pid;
-     struct target_waitstatus *status;
-{
-  unsigned char buf[PBUFSIZ];
-  int thread_num = -1;
-  unsigned char cmd;
-  int proc;
-
-  status->kind = TARGET_WAITKIND_EXITED;
-  status->value.integer = 0;
-
-  while (1)
-    {
-      unsigned char *p;
-
-      ofunc = (void (*)()) signal (SIGINT, arc_interrupt);
-      arc_xfer_cntlreg (1, &cntl_reg);
-      signal (SIGINT, ofunc);
-      if (cntl_reg & cntl_reg_halt_bit[curr_processor])
-	break;
-      status->kind = TARGET_WAITKIND_STOPPED;
-    }
-
-#if 0
-  if ((curr_processor != UNUSED1_PROCESSOR) && 
-      !(cntl_reg & cntl_reg_halt_bit[UNUSED1_PROCESSOR]))
-    {
-      cmd = cntl_reg | cntl_reg_halt_bit[UNUSED1_PROCESSOR];
-      arc_xfer_cntlreg (0, &cmd);
-      while (1)
-	{
-	  unsigned char *p;
-	  
-	  ofunc = (void (*)()) signal (SIGINT, arc_interrupt);
-	  arc_xfer_cntlreg (1, &cntl_reg);
-	  signal (SIGINT, ofunc);
-	  if (cntl_reg & cntl_reg_halt_bit[UNUSED1_PROCESSOR])
-	    break;
-	}
-    }
-
-  for (proc = UNUSED1_PROCESSOR ; proc <= UNUSED3_PROCESSOR; proc++)
-    {
-      if ((cntl_reg & cntl_reg_halt_bit[proc]))
-	continue;
-      cmd = cntl_reg | cntl_reg_halt_bit[proc];
-      arc_xfer_cntlreg (0, &cmd);
-    }
-#endif
-
-  arc_xfer_reg (curr_processor, 1, 1, 0, &status_reg);
-  return inferior_pid;
-}
-
-/* Number of bytes of registers this implements.  */
-static int register_bytes_found;
-
-/* Read the remote registers into the block REGS.  */
-/* Currently we just read all the registers, so we don't use regno.  */
-
-static void
-arc_fetch_registers (regno)
-     int regno;
-{
-  int i;
-  char regs[REGISTER_BYTES];
-
-  /* Unimplemented registers read as all bits zero.  */
-  memset (regs, 0, REGISTER_BYTES);
-
-  /* get core register */
-  arc_set_addrreg (0);
-  for (i = 0; i < AUX_BEG_REGNUM; i++)
-    {
-      if (curr_processor == UNUSED1_PROCESSOR)
-	arc_xfer_datareg (1, 0, 1, &regs[REGISTER_BYTE(i)]);
-      else
-	arc_xfer_reg (curr_processor, 1, 0, regno, &regs[REGISTER_BYTE(i)]);
-    }
-
-  /* get aux register */
-  for (i = AUX_BEG_REGNUM; i < AUX_END_REGNUM; i++)
-    {
-      int auxregnum = aux_reg_map[curr_processor][i-AUX_BEG_REGNUM+1];
-      if (auxregnum == -1)
-	continue;
-      arc_xfer_reg (curr_processor, 1, 1, auxregnum, &regs[REGISTER_BYTE(i)]);
-    }
-  /* copy from status register to pc */
-  for (i = 1; i <= 3; i++)
-    registers[REGISTER_BYTE (PC_REGNUM)+i] = 
-      registers[REGISTER_BYTE (STA_REGNUM)+i];
-
-/*
-  if (i != register_bytes_found)
-    {
-      register_bytes_found = i;
-      if (!REGISTER_BYTES_OK (i))
-	warning ("Remote reply is too short: %s", buf);
-    }
-*/
-
-  for (i = 0; i < NUM_REGS; i++)
-    supply_register (i, &regs[REGISTER_BYTE(i)]);
-}
-
-/* Prepare to store registers.  Since we may send them all,
-   we have to read out the ones we don't want to change first.  */
-
-static void 
-arc_prepare_to_store ()
-{
-  /* Make sure the entire registers array is valid.  */
-  read_register_bytes (0, (char *)NULL, REGISTER_BYTES);
-}
-
-/* Store register REGNO, or all registers if REGNO == -1, from the contents
-   of REGISTERS.  FIXME: ignores errors.  */
-
-static void
-arc_store_registers (regno)
-     int regno;
-{
-  int i;
-  char *regp;
-
-  /* Try storing a single register.  */
-  if (regno >= 0)
-    {
-      int isaux = (regno >= AUX_BEG_REGNUM ? 1 : 0);
-
-      regp = &registers[REGISTER_BYTE (regno)];
-      arc_xfer_reg (curr_processor, 0, isaux, regno, regp);
-    }
-
-  /* store core regs */
-  arc_set_addrreg (0);
-  for (i = 0; i < AUX_BEG_REGNUM; i++)
-    {
-      regp = &registers[REGISTER_BYTE (i)];
-      if (curr_processor == UNUSED1_PROCESSOR)
-	arc_xfer_datareg (0, 0, 1, regp);
-      else
-	arc_xfer_reg (curr_processor, 0, 0, regno, regp);
-    }
-
-  /* store aux regs */
-  /* copy pc back to status register */
-  for (i = 1; i <= 3; i++)
-    registers[REGISTER_BYTE (STA_REGNUM)+i] = 
-      registers[REGISTER_BYTE (PC_REGNUM)+i];
-  for (i = AUX_BEG_REGNUM; i <= AUX_END_REGNUM; i++)
-    {
-      int auxregnum = aux_reg_map[curr_processor][i-AUX_BEG_REGNUM+1];
-      if (auxregnum == -1)
-	continue;
-      regp = &registers[REGISTER_BYTE (i)];
-      arc_xfer_reg (curr_processor, 0, 1, auxregnum, regp);
-    }
-
-}
-
-#if 0
-/* Use of the data cache is disabled because it loses for looking at
-   and changing hardware I/O ports and the like.  Accepting `voltile'
-   would perhaps be one way to fix it, but a better way which would
-   win for more cases would be to use the executable file for the text
-   segment, like the `icache' code below but done cleanly (in some
-   target-independent place, perhaps in target_xfer_memory, perhaps
-   based on assigning each target a speed or perhaps by some simpler
-   mechanism).  */
-
-/* Read a word from remote address ADDR and return it.
-   This goes through the data cache.  */
-
-static int
-arc_fetch_word (addr)
-     CORE_ADDR addr;
-{
-#if 0
-  if (icache)
-    {
-      extern CORE_ADDR text_start, text_end;
-
-      if (addr >= text_start && addr < text_end)
-	{
-	  int buffer;
-	  xfer_core_file (addr, &buffer, sizeof (int));
-	  return buffer;
-	}
-    }
-#endif
-  return dcache_fetch (remote_dcache, addr);
-}
-
-/* Write a word WORD into remote address ADDR.
-   This goes through the data cache.  */
-
-static void
-arc_store_word (addr, word)
-     CORE_ADDR addr;
-     int word;
-{
-  dcache_poke (remote_dcache, addr, word);
-}
-#endif /* 0 */
-
-
-/* Write memory data directly to the remote machine.
-   This does not inform the data cache; the data cache uses this.
-   MEMADDR is the address in the remote memory space.
-   MYADDR is the address of the buffer in our space.
-   LEN is the number of bytes.
-
-   Returns number of bytes transferred, or 0 for error.  */
-
-static int
-arc_write_bytes (memaddr, myaddr, len)
-     CORE_ADDR memaddr;
-     unsigned char *myaddr;
-     int len;
-{
-  char buf1[6] = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0};
-  char buf2[6] = {0x21, 0x0, 0x0, 0x0, 0x0, 0x0};
-  int i;
-  char *p;
-
-  /* We send target system values byte by byte, in increasing byte addresses*/
-
-  buf1[4] = memaddr & 0xff;
-  buf1[3] = (memaddr >> 8) & 0xff;
-  buf1[2] = (memaddr >> 16) & 0xff;
-  buf1[1] = (memaddr >> 24) & 0xff;
-  putpkt (buf1, 5);
-
-  for (i = 0; i < len; )
-    {
-      buf2[1] = myaddr[i++];
-      buf2[2] = myaddr[i++];
-      buf2[3] = myaddr[i++];
-      buf2[4] = myaddr[i++];
-      putpkt (buf2, 5);
-    }
-
-  return len;
-}
-
-/* Read memory data directly from the remote machine.
-   This does not use the data cache; the data cache uses this.
-   MEMADDR is the address in the remote memory space.
-   MYADDR is the address of the buffer in our space.
-   LEN is the number of bytes.
-
-   Returns number of bytes transferred, or 0 for error.  */
-
-static int
-arc_read_bytes (memaddr, myaddr, len)
-     CORE_ADDR memaddr;
-     unsigned char *myaddr;
-     int len;
-{
-  unsigned char buf1[6] = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0};
-  unsigned char buf2[3] = {0x31, 0x0, 0x0};
-  unsigned char buf3[5];
-  int i;
-  char *p;
-
-  /* We send target system values byte by byte, in increasing byte addresses*/
-
-  buf1[4] = memaddr & 0xff;
-  buf1[3] = (memaddr >> 8) & 0xff;
-  buf1[2] = (memaddr >> 16) & 0xff;
-  buf1[1] = (memaddr >> 24) & 0xff;
-  putpkt (buf1, 5);
-
-  for (i = 0; i < len; )
-    {
-      putpkt (buf2, 2);
-      getpkt (buf3, 4);
-      myaddr[i++] = buf3[1];
-      myaddr[i++] = buf3[2];
-      myaddr[i++] = buf3[3];
-      myaddr[i++] = buf3[4];
-    }
-
-  return i;
-}
-
-
-/* Read or write LEN bytes from inferior memory at MEMADDR, transferring
-   to or from debugger address MYADDR.  Write to inferior if SHOULD_WRITE is
-   nonzero.  Returns length of data written or read; 0 for error.  */
-
-/* ARGSUSED */
-static int
-arc_xfer_memory(memaddr, myaddr, len, should_write, target)
-     CORE_ADDR memaddr;
-     char *myaddr;
-     int len;
-     int should_write;
-     struct target_ops *target;			/* ignored */
-{
-  int xfersize;
-  int bytes_xferred;
-  int total_xferred = 0;
-
-  while (len > 0)
-    {
-      if (len > MAXBUFBYTES)
-	xfersize = MAXBUFBYTES;
-      else
-	xfersize = len;
-
-      if (should_write)
-        bytes_xferred = arc_write_bytes (memaddr,
-					    (unsigned char *)myaddr, xfersize);
-      else
-	bytes_xferred = arc_read_bytes (memaddr,
-					   (unsigned char *)myaddr, xfersize);
-
-      /* If we get an error, we are done xferring.  */
-      if (bytes_xferred == 0)
-	break;
-
-      memaddr += bytes_xferred;
-      myaddr  += bytes_xferred;
-      len     -= bytes_xferred;
-      total_xferred += bytes_xferred;
-    }
-  return total_xferred;
-}
-
-
-static void
-arc_files_info (ignore)
-     struct target_ops *ignore;
-{
-  puts_filtered ("Debugging a target over a serial line.\n");
-}
-
-
-/* Read a single character from the remote end, masking it down to 7 bits. */
-static int
-readchar ()
-{
-  int ch;
-
-  ch = SERIAL_READCHAR (arc_desc, 0);
-
-  switch (ch)
-    {
-    case SERIAL_EOF:
-      error ("Remote connection closed");
-    case SERIAL_ERROR:
-      perror_with_name ("Remote communication error");
-    case SERIAL_TIMEOUT:
-      return ch;
-    default:
-      return ch & 0x7f;
-    }
-}
-
-/* Send a packet to the remote machine, with error checking.
-   The data of the packet is in BUF.  */
-
-static int
-putpkt (buf, len)
-     char *buf;
-     int len;
-{
-  int i = 0;
-  unsigned char csum = 0;
-
-  while (i < len)
-    {
-      if (remote_debug)
-	{
-	  printf_unfiltered ("Sending packet: %s...", buf);
-	  gdb_flush(gdb_stdout);
-	}
-      if (SERIAL_WRITE (arc_desc, buf, i))
-	perror_with_name ("putpkt: write failed");
-      i++;
-
-#if 0
-      /* This is wrong.  If doing a long backtrace, the user should be
-	 able to get out next time we call QUIT, without anything as violent
-	 as interrupt_query.  If we want to provide a way out of here
-	 without getting to the next QUIT, it should be based on hitting
-	 ^C twice as in arc_wait.  */
-      if (quit_flag)
-	{
-	  quit_flag = 0;
-	  interrupt_query ();
-	}
-#endif
-    }
-}
-
-/* Read a packet from the remote machine, with error checking,
-   and store it in BUF.  BUF is expected to be of size PBUFSIZ.
-   If FOREVER, wait forever rather than timing out; this is used
-   while the target is executing user code.  */
-
-static void
-getpkt (buf, len)
-     char *buf;
-     int len;
-{
-  int c;
-  int i;
-
-  for (i = 0; i < len; i++)
-    {
-      c = readchar ();
-      if (c == SERIAL_ERROR)
-	{
-	  if (remote_debug)
-	    puts_filtered ("Read error.\n");
-	}
-    }
-  buf[i] = '\0';
-
-  if (remote_debug)
-    fprintf_unfiltered (gdb_stderr, "Packet received: %s\n", buf);
-  if (i != len)
-    printf_unfiltered ("Ignoring packet error, continuing...\n");
-}
-
-static void
-arc_kill ()
-{
-  /* For some mysterious reason, wait_for_inferior calls kill instead of
-     mourn after it gets TARGET_WAITKIND_SIGNALLED.  Work around it.  */
-  if (kill_kludge)
-    {
-      kill_kludge = 0;
-      target_mourn_inferior ();
-      return;
-    }
-  target_mourn_inferior ();
-}
-
-static void
-arc_mourn ()
-{
-  unpush_target (&arc_ops);
-  generic_mourn_inferior ();
-}
-
-
-
-static unsigned char big_break_insn[] = BIG_BREAKPOINT;
-static unsigned char little_break_insn[] = LITTLE_BREAKPOINT;
-#define BREAKPOINT_LEN (sizeof little_break_insn)
-
-/* Insert a breakpoint on targets that don't have any better breakpoint
-   support.  We read the contents of the target location and stash it,
-   then overwrite it with a breakpoint instruction.  ADDR is the target
-   location in the target machine.  CONTENTS_CACHE is a pointer to 
-   memory allocated for saving the target contents.  It is guaranteed
-   by the caller to be long enough to save sizeof BREAKPOINT bytes (this
-   is accomplished via BREAKPOINT_MAX).  */
-
-static int
-arc_insert_breakpoint (addr, contents_cache)
-     CORE_ADDR addr;
-     char *contents_cache;
-{
-  int val;
-
-  val = target_read_memory (addr, contents_cache, BREAKPOINT_LEN);
-  if (val == 0)
-    {
-      if (TARGET_BYTE_ORDER == BIG_ENDIAN)
-	val = target_write_memory (addr, (char *) big_break_insn,
-				   BREAKPOINT_LEN);
-      else
-	val = target_write_memory (addr, (char *) little_break_insn,
-				   BREAKPOINT_LEN);
-    }
-  return val;
-}
-
-static int
-arc_remove_breakpoint (addr, contents_cache)
-     CORE_ADDR addr;
-     char *contents_cache;
-{
-  return target_write_memory (addr, contents_cache, BREAKPOINT_LEN);
-}
-
-/* Define the target subroutine names */
-
-struct target_ops arc_ops = {
-  "arc",			/* to_shortname */
-  "Remote target in arc-specific protocol",	/* to_longname */
-  "Use a remote computer via a parallel line, using a arc-specific protocol.\n\
-Specify the device it is connected to.",  /* to_doc */
-  arc_open,			/* to_open */
-  arc_close,			/* to_close */
-  NULL,				/* to_attach */
-  arc_detach,		/* to_detach */
-  arc_resume,		/* to_resume */
-  arc_wait,			/* to_wait */
-  arc_fetch_registers,	/* to_fetch_registers */
-  arc_store_registers,	/* to_store_registers */
-  arc_prepare_to_store,	/* to_prepare_to_store */
-  arc_xfer_memory,		/* to_xfer_memory */
-  arc_files_info,		/* to_files_info */
-
-  arc_insert_breakpoint,	/* to_insert_breakpoint */
-  arc_remove_breakpoint,	/* to_remove_breakpoint */
-
-  NULL,				/* to_terminal_init */
-  NULL,				/* to_terminal_inferior */
-  NULL,				/* to_terminal_ours_for_output */
-  NULL,				/* to_terminal_ours */
-  NULL,				/* to_terminal_info */
-  arc_kill,			/* to_kill */
-  generic_load,			/* to_load */
-  NULL,				/* to_lookup_symbol */
-  NULL,				/* to_create_inferior */
-  arc_mourn,			/* to_mourn_inferior */
-  0,				/* to_can_run */
-  0,				/* to_notice_signals */
-  0,				/* to_thread_alive */
-  0,				/* to_stop */
-  process_stratum,		/* to_stratum */
-  NULL,				/* to_next */
-  1,				/* to_has_all_memory */
-  1,				/* to_has_memory */
-  1,				/* to_has_stack */
-  1,				/* to_has_registers */
-  1,				/* to_has_execution */
-  NULL,				/* sections */
-  NULL,				/* sections_end */
-  OPS_MAGIC			/* to_magic */
-};
-
-void
-_initialize_remote_arc ()
-{
-  add_target (&arc_ops);
-}