dummy commit before egcs merge

14 files changed, 1247 insertions, 74 deletions

diff --git a/config/ChangeLog b/config/ChangeLog
index d1178fb..dd24901 100644
--- a/config/ChangeLog
+++ b/config/ChangeLog
@@ -1,3 +1,35 @@
+Mon Nov  2 15:15:33 1998  Geoffrey Noer  <noer@cygnus.com>
+
+        * mh-cygwin32: delete
+        * mh-cygwin: was mh-cygwin32
+
+1998-10-26  Syd Polk  <spolk@cygnus.com>
+
+	* acinclude.m4: TCLHDIR and TKHDIR need to be run through
+	cygpath for Microsoft builds.
+
+1998-10-20  Syd Polk  <spolk@cygnus.com>
+
+	* acinclude.m4: Re-exported TCL_LIBS and TCL_LD_SEARCH_FLAGS
+	because itcl needs them.
+
+Mon Aug 31 17:50:53 1998  David Edelsohn  <edelsohn@mhpcc.edu>
+
+	* mh-aix43 (NM_FOR_TARGET): Add -X32_64 as well.
+
+Sat Aug 29 14:32:55 1998  David Edelsohn  <edelsohn@mhpcc.edu>
+
+	* mh-aix43: New file.
+
+Mon Aug 10 00:15:47 1998  HJ Lu (hjl@gnu.org)
+
+	* mt-linux (CXXFLAGS_FOR_TARGET): Add -D_GNU_SOURCE.
+
+start-sanitize-tmgr
+1998-07-29  Rob Savoye  <rob@chinadoll.cygnus.com>
+
+	* .Sanitize: Add acinclude.m4 to Things-To-Lose.
+end-sanitize-tmgr
 start-sanitize-sky
 Mon Jul 27 16:23:04 1998  Doug Evans  <devans@canuck.cygnus.com>
 
diff --git a/config/mh-cygwin b/config/mh-cygwin
new file mode 100644
index 0000000..29f1656
--- /dev/null
+++ b/config/mh-cygwin
@@ -0,0 +1,9 @@
+# We don't want debugging info in Win32-hosted toolchains.
+# Accomplish this by overriding CFLAGS.
+CFLAGS=-O2
+CXXFLAGS=-O2
+
+# We also need to override LIBGCC2_DEBUG_CFLAGS so libgcc2 will be
+# built without debugging information
+
+LIBGCC2_DEBUG_CFLAGS=
diff --git a/ltmain.sh b/ltmain.sh
index 1c05d17..eee5763 100644
--- a/ltmain.sh
+++ b/ltmain.sh
@@ -743,6 +743,11 @@ if test -z "$show_help"; then
             if test "$hardcode_direct" = no; then
               compile_command="$compile_command $dir/$linklib"
             elif test "$hardcode_minus_L" = no; then
+	      case "$host" in
+	      *-*-sunos*)
+                compile_shlibpath="$compile_shlibpath$dir:"
+		;;
+	      esac
               compile_command="$compile_command -L$dir -l$name"
             elif test "$hardcode_shlibpath_var" = no; then
               compile_shlibpath="$compile_shlibpath$dir:"
@@ -1055,8 +1060,8 @@ if test -z "$show_help"; then
 	  major=
 	  versuffix=
 	  verstring="0.0"
-	  case "$version_type" in
-	  sunos)
+	  case "$host" in
+	  *-*-sunos*)
 	    versuffix=".0.0"
 	    ;;
 	  esac
@@ -1757,7 +1762,7 @@ libdir='$install_libdir'\
 
     # There may be an optional sh(1) argument at the beginning of
     # install_prog (especially on Windows NT).
-    if test "$nonopt" = "$SHELL"; then
+    if test "$nonopt" = "$SHELL" || test "$nonopt" = "/bin/sh"; then
       # Aesthetically quote it.
       arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
       case "$arg" in
diff --git a/missing b/missing
new file mode 100755
index 0000000..cbe2b0e
--- /dev/null
+++ b/missing
@@ -0,0 +1,188 @@
+#! /bin/sh
+# Common stub for a few missing GNU programs while installing.
+# Copyright (C) 1996, 1997 Free Software Foundation, Inc.
+# Franc,ois Pinard <pinard@iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+if test $# -eq 0; then
+  echo 1>&2 "Try \`$0 --help' for more information"
+  exit 1
+fi
+
+case "$1" in
+
+  -h|--h|--he|--hel|--help)
+    echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
+error status if there is no known handling for PROGRAM.
+
+Options:
+  -h, --help      display this help and exit
+  -v, --version   output version information and exit
+
+Supported PROGRAM values:
+  aclocal      touch file \`aclocal.m4'
+  autoconf     touch file \`configure'
+  autoheader   touch file \`config.h.in'
+  automake     touch all \`Makefile.in' files
+  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
+  flex         create \`lex.yy.c', if possible, from existing .c
+  lex          create \`lex.yy.c', if possible, from existing .c
+  makeinfo     touch the output file
+  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]"
+    ;;
+
+  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+    echo "missing - GNU libit 0.0"
+    ;;
+
+  -*)
+    echo 1>&2 "$0: Unknown \`$1' option"
+    echo 1>&2 "Try \`$0 --help' for more information"
+    exit 1
+    ;;
+
+  aclocal)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified \`acinclude.m4' or \`configure.in'.  You might want
+         to install the \`Automake' and \`Perl' packages.  Grab them from
+         any GNU archive site."
+    touch aclocal.m4
+    ;;
+
+  autoconf)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified \`configure.in'.  You might want to install the
+         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
+         archive site."
+    touch configure
+    ;;
+
+  autoheader)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified \`acconfig.h' or \`configure.in'.  You might want
+         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
+         from any GNU archive site."
+    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER([^):]*:\([^)]*\)).*/\1/p' configure.in`
+    if test -z "$files"; then
+      files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^):]*\)).*/\1/p' configure.in`
+      test -z "$files" || files="$files.in"
+    else
+      files=`echo "$files" | sed -e 's/:/ /g'`
+    fi
+    test -z "$files" && files="config.h.in"
+    touch $files
+    ;;
+
+  automake)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified \`Makefile.am', \`acinclude.m4' or \`configure.in'.
+         You might want to install the \`Automake' and \`Perl' packages.
+         Grab them from any GNU archive site."
+    find . -type f -name Makefile.am -print \
+      | sed 's/^\(.*\).am$/touch \1.in/' \
+      | sh
+    ;;
+
+  bison|yacc)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified a \`.y' file.  You may need the \`Bison' package
+         in order for those modifications to take effect.  You can get
+         \`Bison' from any GNU archive site."
+    rm -f y.tab.c y.tab.h
+    if [ $# -ne 1 ]; then
+        eval LASTARG="\${$#}"
+	case "$LASTARG" in
+	*.y)
+	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
+	    if [ -f "$SRCFILE" ]; then
+	         cp "$SRCFILE" y.tab.c
+	    fi
+	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
+	    if [ -f "$SRCFILE" ]; then
+	         cp "$SRCFILE" y.tab.h
+	    fi
+	  ;;
+	esac
+    fi
+    if [ ! -f y.tab.h ]; then
+	echo >y.tab.h
+    fi
+    if [ ! -f y.tab.c ]; then
+	echo 'main() { return 0; }' >y.tab.c
+    fi
+    ;;
+
+  lex|flex)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified a \`.l' file.  You may need the \`Flex' package
+         in order for those modifications to take effect.  You can get
+         \`Flex' from any GNU archive site."
+    rm -f lex.yy.c
+    if [ $# -ne 1 ]; then
+        eval LASTARG="\${$#}"
+	case "$LASTARG" in
+	*.l)
+	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+	    if [ -f "$SRCFILE" ]; then
+	         cp "$SRCFILE" lex.yy.c
+	    fi
+	  ;;
+	esac
+    fi
+    if [ ! -f lex.yy.c ]; then
+	echo 'main() { return 0; }' >lex.yy.c
+    fi
+    ;;
+
+  makeinfo)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified a \`.texi' or \`.texinfo' file, or any other file
+         indirectly affecting the aspect of the manual.  The spurious
+         call might also be the consequence of using a buggy \`make' (AIX,
+         DU, IRIX).  You might want to install the \`Texinfo' package or
+         the \`GNU make' package.  Grab either from any GNU archive site."
+    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+    if test -z "$file"; then
+      file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+      file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
+    fi
+    touch $file
+    ;;
+
+  *)
+    echo 1>&2 "\
+WARNING: \`$1' is needed, and you do not seem to have it handy on your
+         system.  You might have modified some files without having the
+         proper tools for further handling them.  Check the \`README' file,
+         it often tells you about the needed prerequirements for installing
+         this package.  You may also peek at any GNU archive site, in case
+         some other package would contain this missing \`$1' program."
+    exit 1
+    ;;
+esac
+
+exit 0
diff --git a/mkdep b/mkdep
new file mode 100755
index 0000000..3c5b508
--- /dev/null
+++ b/mkdep
@@ -0,0 +1,87 @@
+#!/bin/sh -
+#
+# Copyright (c) 1987 Regents of the University of California.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms are permitted
+# provided that the above copyright notice and this paragraph are
+# duplicated in all such forms and that any documentation,
+# advertising materials, and other materials related to such
+# distribution and use acknowledge that the software was developed
+# by the University of California, Berkeley.  The name of the
+# University may not be used to endorse or promote products derived
+# from this software without specific prior written permission.
+# THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+# IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+# WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+#
+#	@(#)mkdep.sh	5.12 (Berkeley) 6/30/88
+#
+
+MAKE=Makefile			# default makefile name is "Makefile"
+
+while :
+	do case "$1" in
+		# -f allows you to select a makefile name
+		-f)
+			MAKE=$2
+			shift; shift ;;
+
+		# the -p flag produces "program: program.c" style dependencies
+		# so .o's don't get produced
+		-p)
+			SED='s;\.o;;'
+			shift ;;
+		*)
+			break ;;
+	esac
+done
+
+if [ $# = 0 ] ; then
+	echo 'usage: mkdep [-p] [-f makefile] [flags] file ...'
+	exit 1
+fi
+
+if [ ! -w $MAKE ]; then
+	echo "mkdep: no writeable file \"$MAKE\""
+	exit 1
+fi
+
+TMP=/tmp/mkdep$$
+
+trap 'rm -f $TMP ; exit 1' 1 2 3 13 15
+
+cp $MAKE ${MAKE}.bak
+
+sed -e '/DO NOT DELETE THIS LINE/,$d' < $MAKE > $TMP
+
+cat << _EOF_ >> $TMP
+# DO NOT DELETE THIS LINE -- mkdep uses it.
+# DO NOT PUT ANYTHING AFTER THIS LINE, IT WILL GO AWAY.
+
+_EOF_
+
+# If your compiler doesn't have -M, add it.  If you can't, the next two
+# lines will try and replace the "cc -M".  The real problem is that this
+# hack can't deal with anything that requires a search path, and doesn't
+# even try for anything using bracket (<>) syntax.
+#
+# egrep '^#include[ 	]*".*"' /dev/null $* |
+# sed -e 's/:[^"]*"\([^"]*\)".*/: \1/' -e 's/\.c/.o/' |
+
+gcc -MM $* |
+sed "
+	s; \./; ;g
+	$SED" >> $TMP
+
+cat << _EOF_ >> $TMP
+
+# IF YOU PUT ANYTHING HERE IT WILL GO AWAY
+_EOF_
+
+# copy to preserve permissions
+cp $TMP $MAKE
+rm -f ${MAKE}.bak $TMP
+exit 0
+
+
diff --git a/mkinstalldirs b/mkinstalldirs
new file mode 100755
index 0000000..cc8783e
--- /dev/null
+++ b/mkinstalldirs
@@ -0,0 +1,36 @@
+#! /bin/sh
+# mkinstalldirs --- make directory hierarchy
+# Author: Noah Friedman <friedman@prep.ai.mit.edu>
+# Created: 1993-05-16
+# Last modified: 1994-03-25
+# Public domain
+
+errstatus=0
+
+for file in ${1+"$@"} ; do 
+   set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
+   shift
+
+   pathcomp=
+   for d in ${1+"$@"} ; do
+     pathcomp="$pathcomp$d"
+     case "$pathcomp" in
+       -* ) pathcomp=./$pathcomp ;;
+     esac
+
+     if test ! -d "$pathcomp"; then
+        echo "mkdir $pathcomp" 1>&2
+        mkdir "$pathcomp" > /dev/null 2>&1 || lasterr=$?
+     fi
+
+     if test ! -d "$pathcomp"; then
+	errstatus=$lasterr
+     fi
+
+     pathcomp="$pathcomp/"
+   done
+done
+
+exit $errstatus
+
+# mkinstalldirs ends here
diff --git a/move-if-change b/move-if-change
new file mode 100755
index 0000000..565825f
--- /dev/null
+++ b/move-if-change
@@ -0,0 +1,32 @@
+#!/bin/sh
+
+# Copyright (C) 1996 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+if
+test -r $2
+then
+if
+cmp $1 $2 > /dev/null
+then
+echo $2 is unchanged
+rm -f $1
+else
+mv -f $1 $2
+fi
+else
+mv -f $1 $2
+fi
diff --git a/mpw-README b/mpw-README
index c762c9a..767140b 100644
--- a/mpw-README
+++ b/mpw-README
@@ -1,25 +1,376 @@
-This is preliminary information about the Mac MPW port of the Cygnus tools.
+This is basic information about the Macintosh(tm) MPW(tm) port of the
+GNU tools.  The information below applies to both native and cross
+compilers.
 
-To build everything, create an object directory, setdirectory into it, and do:
+(Please note that there are two versions of this file; "mpw-README"
+is the source form, and "Read Me for MPW" is the distribution form.
+"Read Me for MPW" has 8-bit chars such as \Option-d embedded in it.)
 
-	::src:mpw-configure --target <name> --srcdir ::src: --prefix <whatever>
+INSTALLING GNU TOOLS
 
-Then
-	mpw-build all
+* System Requirements
 
-will build everything, and
+To use these tools, you will need a Mac with a 68020 or better or else
+any PowerMac, System 7.1 or later, and MPW 3.3 or 3.4.  You will *not*
+need any other MPW compiler unless you want to rebuild from sources,
+nor even any include files, unless you are building actual Mac
+applications.  For PowerMac native you will need PPCLink, however;
+also the executables are PowerPC-only.
+
+* Automated Installation
+
+The simplest way to install GNU tools is to run the Install script.
+The script will copy things to where you want to keep them, will build
+a UserStartup file with settings corresponding to where things were
+copied, and offer to put that UserStartup file in your MPW folder.
+
+The Install script does not alter anything in the System Folder, and
+it does not take any action without confirmation.
+
+The Install script will be at the top level of the binary
+distribution, or at the top level of the object directory if
+rebuilding from source.  (The sources include a file called
+"mpw-install" at the top level, but it is the source to the Install
+script and cannot be run directly.)
+
+* Manual Installation
+
+If you don't want to run the Install script, you can do installation
+manually; this section describes the steps involved.
+
+The GNU tools can go in any directory that is in your {Commands} list.
+We generally put all the tools somewhere like {Boot}Cygnus:latest:bin,
+and then add to a UserStartup file:
+
+	set Commands "{Boot}Cygnus:latest:bin:,{Commands}"
+
+However, the cpp and cc1 programs of GCC are not normally stored here.
+Instead, they will be in a "lib" directory that is alongside "bin",
+and organized by target and version underneath, with names like
+
+	:lib:gcc-lib:<target>:cygnus-<version>:
+
+If you build and install everything yourself according to the build
+instructions below, then you will not have any problems.  However, you
+may discover that GCC seems unable to find the right cpp and cc1;
+usually this will be because directory names have changed.  (Even
+renaming your hard disk will make this happen.)  In such cases, you
+have several choices.  One is just to add this directory to
+{Commands}, but then you will not be able to get any other cpp or cc1,
+such as those used by a different target or version.  Another way is
+to rename your disk and directories to match the prefix used when the
+tools were compiled.  Finally, you can set the variable
+GCC_EXEC_PREFIX to point to the library directory:
+
+	set GCC_EXEC_PREFIX MyDisk:Stuff:lib:gcc-lib:
+	export GCC_EXEC_PREFIX
+
+You may also want to edit MPW's HEXA 128 resource.  When GCC is built
+using a native GCC, it is compiled to use a special stack allocator
+function alloca().  While this is very efficient, it means that GCC
+will need considerable stack space to run, especially when compiling
+large programs with optimization turned on.  You give MPW more stack
+by editing the HEXA 128 resource of the MPW Shell.  A value of "0008
+0000" gives 512K of stack size, which is usually sufficient.
+
+USING GNU TOOLS
+
+* Using Native PowerMac GCC
+
+Using a native PowerMac GCC to produce MPW tools or MacOS applications
+is more complicated than just "gC foo.c", although no more complicated
+than with other Mac compilers.
+
+To build a native PowerMac MPW tool, use this sequence, where hello.c
+is the usual "hello world" program, and genericcfrg.r is the Rez file
+with the code fragment resource:
+
+gC -I{CIncludes} -fno-builtin -Dpascal= -c -g hello.c
+PPCLink hello.o -o hello \Option-d
+	"{PPCLibraries}"StdCRuntime.o \Option-d
+	"{SharedLibraries}"InterfaceLib \Option-d
+	"{SharedLibraries}"StdCLib \Option-d
+	"{PPCLibraries}"PPCToolLibs.o \Option-d
+	"{PPCLibraries}"PPCCRuntime.o \Option-d
+	"{GCCPPCLibraries}"libgcc.xcoff
+rez -d APPNAME='"'hello'"' GenericCFRG.r -o hello
+setfile -t 'MPST' -c 'MPS ' hello
+
+The same sequence works to build a MacOS application, but you set the file
+type to 'APPL' and don't link in PPCToolLibs.o.  For further details on
+using MPW to build Mac applications, see the general MPW documentation.
+
+Recent versions of PPCLink have an option to generate the code
+fragment resource and automatically set creator and file type;
+here is what GenericCFRG.r should look like if you have an older
+PPCLink or are using GNU ld:
+
+#include "CodeFragmentTypes.r"
+
+resource 'cfrg' (0) {
+        {
+                kPowerPC,
+                kFullLib,
+                kNoVersionNum,kNoVersionNum,
+                0,0,
+                kIsApp,kOnDiskFlat,kZeroOffset,kWholeFork,
+                APPNAME // must be defined on Rez command line with -d option
+        }
+};
+
+In general this port of GCC supports the same option syntax and
+behavior as its Unix counterpart.  It also has similar compilation
+rules, so it will run the assembler on .s files and so forth.
+
+The GCC manual includes full information on the available options.
+One option that may be especially useful is "-v", which shows you what
+tools and options are being used; unlike most Mac C compilers, GCC
+directs assembly and linking in addition to compilation.
+
+MPW GCC does feature two extensions to the option syntax; '-d macro=name'
+works just as '-Dmacro=name' does in Unix, and '-i directory' works the
+same as '-Idirectory'.
+
+MPW GCC supports the usual Pascal-style strings and alignment pragmas.
+
+To find standard include files you can set the variable GCCIncludes:
+
+	set GCCIncludes MyDisk:MyIncludes:
+	export GCCIncludes
+
+GCCIncludes is similar to MPW's CIncludes or CW's MWCIncludes.  In
+order to use MPW's usual include files, just say:
+
+	set GCCIncludes "{CIncludes}"
+	export GCCIncludes
+
+* Using GCC as a Cross-Compiler
+
+If you have a cross-compiler, and you have all of the correct
+target-side crt0 and libraries available, then to compile and link a
+file "foo.c", you can say just
+
+	gC foo.c
+
+The output file will be an MPW binary file named "a.out"; the format
+of the contents will depend on which target is in use, so for instance
+a MIPS-targeting GCC will produce ECOFF or ELF executables.
+
+Note that using MPW include files with a cross-compiler is somewhat
+dangerous.
+
+* Using the Assembler and Friends
+
+The assembler ("as") and linker ("ld") are faithful ports of their
+Unix counterparts.  Similarly, the binutils "ar", "cplusfilt", "nm",
+"objcopy", "objdump", "ranlib", "size", "strings", and "strip" are all
+like they are under Unix.  (Note that "cplusfilt" is usually called
+"c++filt" under Unix.)
+
+* Using GDB
+
+There are two flavors of GDB.  "gdb" is an MPW tool that works very
+much like it does in Unix; put a command into the MPW worksheet and
+type the <enter> key to send it to GDB.  While "gdb" is running, you
+cannot do anything else in MPW, although you can switch to other
+Mac applications and use them.
+
+"SiowGDB" is also a Mac application, but it is GDB using the SIOW
+package to provide console emulation.  Commands are exactly as for the
+MPW tool, but since this is its own application, you can switch
+between it and MPW.
+
+BUILDING GNU TOOLS
+
+This port of the GNU tools uses a configure script similar to
+that used for GNU tools under Unix, but rewritten for MPW.  As with
+Unix configuration, there is an "object" directory that may be
+different from the "source" directory.  In the example commands below,
+we will assume that we are currently in the object directory, and that
+the source directory is "{Boot}Cygnus:src:".
+
+* Requirements for Building
+
+In addition to the sources, you will need a set of tools that the
+configure and build scripts assume to be available.  These tools
+(and their versions, if relevant) are as follows:
+
+	byacc tool
+	flex (2.3.7) tool (and Flex.skel file)
+	forward-include script
+	MoveIfChange script
+	mpw-touch script
+	mpw-true script
+	NewFolderRecursive script
+	null-command script
+	open-brace script
+	sed (1.13) tool
+	tr-7to8 script
+	true script
+
+The scripts are in the sources, under utils:mpw:. You must arrange to
+get the other tools yourself (they are readily available from the
+"usual" net sites, and are also on many CDROMS).  In addition, there
+will usually be a set of these available at ftp.cygnus.com, in pub/mac.
+
+You may put the build tools in your usual Tools or Scripts
+directories, or keep them in a separate directories.  We prefer to
+make a directory called "buildtools" and we put this in one of our
+UserStartup files:
+
+	set Commands "{Boot}Cygnus:buildtools:,{Commands}"
+
+Flex uses an environment variable FLEX_SKELETON to locate its skeleton
+file, so you need to do something like this, preferably in a UserStartup:
+
+	Set FLEX_SKELETON "{Boot}"Cygnus:buildtools:Flex.skel
+	Export FLEX_SKELETON
+
+* Configuring
+
+Before you can build anything, you must configure.  You do this by
+creating an directory where object files will be stored, setdirectory
+to that directory and do a configure command:
+
+	{Boot}Cygnus:src:mpw-configure --target <name> --cc <compiler> --srcdir {Boot}Cygnus:src: --prefix <whatever>
+
+If the source directory is not in your {Commands} list, then you must
+supply a full pathname to mpw-configure, since mpw-configure invokes
+itself after switching into each subdirectory.  Using a relative
+pathname, even something like ':mpw-configure', will therefore not work.
+
+<name> must be a known target.  Valid ones include "m68k-apple-macos",
+"powerpc-apple-macos", "i386-unknown-go32", "mips-idt-ecoff", and
+"sh-hitachi-hms".  Not all target types are accepted for all of the
+tools yet.
+
+<compiler> must be the name of the compiler to use.  It defaults to "mpwc".
+
+	(m68k)
+	mpwc	MPW C
+	sc68k	Symantec C
+	mwc68k	Metrowerks C (Codewarrior)
+	gcc68k	GCC
+
+	(powerpc)
+	ppcc	PPCC
+	mrc	Macintosh on RisC (Mister C, aka(?) Frankenstein)
+	scppc	Symantec C
+	mwcppc	Metrowerks C (Codewarrior)
+	gccppc	GCC
+
+Not all compilers will compile all tools equally well!  For m68k Macs,
+MPW C has the best record so far (it has problems, but they can be
+worked around), while for PowerMacs, CodeWarrior is the only compiler
+that has successfully compiled everything into running code.
+
+<prefix> is the path that "gcc" will prepend when looking for tools
+to execute.  GCC_EXEC_PREFIX overrides this value, so you need not
+include it if you plan to use GCC_EXEC_PREFIX.
+
+As an example, here is the configure line that you could use to build
+native PowerMac GCC:
+
+"{Boot}"Cygnus:src:mpw-configure --cc mwcppc --target powerpc-apple-macos --srcdir "{Boot}"Cygnus:src: --prefix "{Boot}"GNUTools:
+
+* Building
+
+If you use CodeWarrior, you *must* first set MWCIncludes to
+{CIncludes}.  This is because you will be building MPW tools, and
+their standard I/O works by making references to data that is part of
+the MPW Shell, which means that the code must be compiled and linked
+with macros that refer to that data, and those macros are in
+{CIncludes}, not the default {MWCIncludes}.  Without this change, you
+will encounter problems compiling libiberty/mpw.c, but tweaking that
+file only masks the real problem, and does not fix it.
+
+The command
+
+	mpw-build
+
+will build everything. Building will take over an hour on a Quadra 800
+or PowerMac 8100/110, longer if the sources are on a shared volume.
+
+You may see some warnings; these are mostly likely benign, typically
+disagreements about declarations of library and system functions.
+
+* Installing
+
+To install the just-built tools, use the command
 
 	mpw-build install
 
-will install it.
+This part of the installation procedure just copies files to the
+location specified at configure time by <prefix>, and, in some cases,
+renames them from temporary internal names to their usual names. This
+install process is *not* the same as what the Install script does;
+Install can copy tools from the installation location chosen at
+configuration time to a user-chosen place, and sets up a UserStartup
+file.  Note that while the Install script is optional, the install
+build action performs some tasks would be very hard to replicate
+manually, so you should always do it before using the tools.
+
+* Known Problems With Using Various Compilers to Build
+
+Most versions of MPW C have problems with compiling GNU software.
+
+MPW C 3.2.x has preprocessing bugs that render it incapable of
+compiling the BFD library, so it can't be used at all for building BFD.
+
+MPW C 3.3, 3.3.1, and 3.3.2 will spontaneously claim to have found
+errors in the source code, but in fact the code is perfectly fine.  If
+this happens, just set the working directory back to the top-level
+objdir (where the configure command above was performed), and type
+"mpw-build all" again.  If it goes on through the supposed error, then
+you got one of the spurious errors.  A full build may require a number
+of these restarts.
+
+MPW C 3.3.3 seems to work OK, at least with the aid of a number of
+workarounds that are in the sources (look for #ifdef MPW_C).
+
+Versions of MPW Make earlier than 4.0d2 have exhibited bizarre behavior,
+failure to substitute variables and the like.
+
+Metrowerks CW6 PPC linker (MWLinkPPC) seems to do bad things with memory
+if the "Modern Memory Manager" is turned on (in the Memory control panel),
+but works OK if it is turned off.
+
+Metrowerks CW6 loses bigtime compiling opcodes:ppc-opc.c, which has
+some deeply nested macros.  (CW7 is OK.)  There is a way to patch the
+file, by substituting constant values.  If you need to do this,
+contact shebs@cygnus.com for details.
+
+<Gestalt.h> is missing from {CIncludes} in the MPW version that comes
+with CW7.  You can just copy the one in CW7's {MWCIncludes}.
+
+CW8 and later have changes to headers and such that will require changes
+to the source in order to be able to use them to rebuild.
 
 KNOWN BUGS
 
-ar rc xxx doesn't work.
+The declarations for memcpy and memcmp in some versions of header files
+may conflict with GCC's builtin definition.  Either use -fno-builtin
+or ignore the warnings.
+
+This is not a bug, but - watch out for cr/nl translation!  For instance,
+if config/mpw-mh-mpw is not properly translated because it has been
+copied or updated separately, then everything will almost build, but
+you will get puzzling error messages from make or the compiler.
+
+'/' or ' ' embedded in any device, directory, or file name may or may
+not work.
+
+objcopy -O srec foo.o makes random output filenames.
+
+Mac-x-mips requires -mgas but Unix hosts don't.
 
-objdump -i idiocy where it creates dummy files.
+GDB will frequently require a '/' on the front of a device name in order
+to recognize it as an absolute rather than a relative pathname.
 
-objcopy -O srec foo.o makes weird output filenames.
+GDB doesn't seem to use the printer port correctly, although it tries.
 
-Mac host requires -mgas but Unix hosts don't.
+The cursor doesn't always spin as much as it should.  To get elaborate
+statistics and warnings about spin rates, add this to UserStartup:
 
+	set MEASURE_SPIN all
+	export MEASURE_SPIN
diff --git a/mpw-build.in b/mpw-build.in
index c9ea70d..86d9530 100644
--- a/mpw-build.in
+++ b/mpw-build.in
@@ -24,43 +24,91 @@ Loop
 	Shift 1
 End Loop
 
+If "{BuildTarget}" =~ /none/
+	Set BuildTarget "all"
+End If
+
 If {verify} == 1
 	Echo "#" Doing "{ThisScript}" "{BuildTarget}" in "`Directory`" ... 
 End If
 
+Set ranmake 0
+
 If "`Exists Makefile`" != ""
 	Echo "Set Echo 1" >{BuildTarget}.makeout
 	Make -f Makefile {BuildTarget} >>{BuildTarget}.makeout
 	{BuildTarget}.makeout
 	Delete {BuildTarget}.makeout
-Else If "{BuildTarget}" =~ /all/
+	Set ranmake 1
+End If
+
+If "`Exists Makefile.PPC`" != ""
+	Echo "Set Echo 1" >{BuildTarget}.makeout.ppc
+	Make -f Makefile.PPC {BuildTarget} >>{BuildTarget}.makeout.ppc
+	{BuildTarget}.makeout.ppc
+	Delete {BuildTarget}.makeout.ppc
+	Set ranmake 1
+End If
+
+If {ranmake} == 1
+	Exit
+End If
+
+# Dispatch on various pseudo-targets.
+
+If "{BuildTarget}" =~ /all/
+	Echo Started `Date`
 	"{ThisScript}" all-gcc
-	"{ThisScript}" all-ld
 	"{ThisScript}" all-gdb
-Else If "{BuildTarget}" =~ /all-binutils/
+	Echo Finished `Date`
+Else If "{BuildTarget}" =~ /all-libiberty/
 	"{ThisScript}" do-libiberty
+Else If "{BuildTarget}" =~ /all-bfd/
 	"{ThisScript}" do-bfd
+Else If "{BuildTarget}" =~ /all-opcodes/
 	"{ThisScript}" do-opcodes
+Else If "{BuildTarget}" =~ /all-byacc/
+	"{ThisScript}" do-byacc
+Else If "{BuildTarget}" =~ /all-flex/
+	"{ThisScript}" all-libiberty
+	"{ThisScript}" do-flex
+Else If "{BuildTarget}" =~ /all-binutils/
+	"{ThisScript}" all-libiberty
+	"{ThisScript}" all-bfd
+	"{ThisScript}" all-opcodes
 	"{ThisScript}" do-binutils
 Else If "{BuildTarget}" =~ /all-gas/
-	"{ThisScript}" do-libiberty
-	"{ThisScript}" do-bfd
-	"{ThisScript}" do-opcodes
+	"{ThisScript}" all-libiberty
+	"{ThisScript}" all-bfd
+	"{ThisScript}" all-opcodes
 	"{ThisScript}" do-gas
 Else If "{BuildTarget}" =~ /all-gcc/
+	"{ThisScript}" all-libiberty
 	"{ThisScript}" all-gas
 	"{ThisScript}" all-binutils
+	"{ThisScript}" all-ld
 	"{ThisScript}" do-gcc
 Else If "{BuildTarget}" =~ /all-gdb/
-	"{ThisScript}" do-libiberty
-	"{ThisScript}" do-bfd
-	"{ThisScript}" do-opcodes
+	"{ThisScript}" all-libiberty
+	"{ThisScript}" all-bfd
+	"{ThisScript}" all-opcodes
 	"{ThisScript}" do-gdb
+Else If "{BuildTarget}" =~ /all-grez/
+	"{ThisScript}" all-libiberty
+	"{ThisScript}" all-bfd
+	"{ThisScript}" do-grez
 Else If "{BuildTarget}" =~ /all-ld/
-	"{ThisScript}" do-libiberty
-	"{ThisScript}" do-bfd
-	"{ThisScript}" do-opcodes
+	"{ThisScript}" all-libiberty
+	"{ThisScript}" all-bfd
+	"{ThisScript}" all-opcodes
 	"{ThisScript}" do-ld
+Else If "{BuildTarget}" =~ /do-byacc/
+	SetDirectory :byacc:
+	::mpw-build all
+Else If "{BuildTarget}" =~ /do-flex/
+	SetDirectory :flex:
+	::mpw-build _bootstrap
+	::mpw-build all
 Else If "{BuildTarget}" =~ /do-bfd/
 	SetDirectory :bfd:
 	::mpw-build all
@@ -72,25 +120,34 @@ Else If "{BuildTarget}" =~ /do-opcodes/
 	::mpw-build all
 Else If "{BuildTarget}" =~ /do-binutils/
 	SetDirectory :binutils:
+	::mpw-build stamps
 	::mpw-build all
 Else If "{BuildTarget}" =~ /do-gas/
 	SetDirectory :gas:
+	::mpw-build stamps
 	::mpw-build all
 Else If "{BuildTarget}" =~ /do-gcc/
 	SetDirectory :gcc:
-	::mpw-build all
+	:mpw-build all
 Else If "{BuildTarget}" =~ /do-gdb/
 	SetDirectory :gdb:
 	::mpw-build all
+Else If "{BuildTarget}" =~ /do-grez/
+	SetDirectory :grez:
+	::mpw-build all
 Else If "{BuildTarget}" =~ /do-ld/
 	SetDirectory :ld:
 	::mpw-build all
+Else If "{BuildTarget}" =~ /do-newlib/
+	SetDirectory :newlib:
+	::mpw-build all
 Else If "{BuildTarget}" =~ /install/
+	"{ThisScript}" install-only-top
 	"{ThisScript}" install-binutils
 	"{ThisScript}" install-gas
 	"{ThisScript}" install-gcc
-#	"{ThisScript}" install-gdb
 	"{ThisScript}" install-ld
+	"{ThisScript}" install-gdb
 Else If "{BuildTarget}" =~ /install-binutils/
 	SetDirectory :binutils:
 	::mpw-build install
@@ -99,14 +156,49 @@ Else If "{BuildTarget}" =~ /install-gas/
 	::mpw-build install
 Else If "{BuildTarget}" =~ /install-gcc/
 	SetDirectory :gcc:
-	::mpw-build install
+	:mpw-build install
 Else If "{BuildTarget}" =~ /install-gdb/
 	SetDirectory :gdb:
 	::mpw-build install
+Else If "{BuildTarget}" =~ /install-grez/
+	SetDirectory :grez:
+	::mpw-build install
 Else If "{BuildTarget}" =~ /install-ld/
 	SetDirectory :ld:
 	::mpw-build install
+Else If "{BuildTarget}" =~ /install-only/
+	"{ThisScript}" install-only-top
+	"{ThisScript}" install-only-binutils
+	"{ThisScript}" install-only-gas
+	"{ThisScript}" install-only-gcc
+	"{ThisScript}" install-only-gdb
+	"{ThisScript}" install-only-ld
+Else If "{BuildTarget}" =~ /install-only-binutils/
+	SetDirectory :binutils:
+	::mpw-build install-only
+Else If "{BuildTarget}" =~ /install-only-gas/
+	SetDirectory :gas:
+	::mpw-build install-only
+Else If "{BuildTarget}" =~ /install-only-gcc/
+	SetDirectory :gcc:
+	:mpw-build install-only
+Else If "{BuildTarget}" =~ /install-only-gdb/
+	SetDirectory :gdb:
+	::mpw-build install-only
+Else If "{BuildTarget}" =~ /install-only-grez/
+	SetDirectory :grez:
+	::mpw-build install-only
+Else If "{BuildTarget}" =~ /install-only-ld/
+	SetDirectory :ld:
+	::mpw-build install-only
+Else If "{BuildTarget}" =~ /install-only-top/
+	NewFolderRecursive "{prefix}"
+	If "{prefix}" != "`Directory`"
+		Duplicate -y 'Read Me for MPW' "{prefix}"'Read Me for MPW'
+		Duplicate -y Install "{prefix}"Install
+	End If
 Else
+	Echo {BuildTarget} not understood, ignoring
 End If
 
 SetDirectory "{savedir}"
diff --git a/mpw-config.in b/mpw-config.in
index 534644e..8028737 100644
--- a/mpw-config.in
+++ b/mpw-config.in
@@ -1,13 +1,42 @@
 # Configuration fragment for Cygnus source tree.
 
-Set host_libs "libiberty opcodes bfd readline"
+# Check that we can find all the special tools that we will need.
+# The test for sed is semi-pointless, because it's already been invoked
+# by the calculation of target_cpu in the main configure script, but
+# the test will also show which one is being used.
 
-Set host_tools "byacc flex binutils ld gas gcc gdb"
+Set Exit 0
+Echo byacc is `Which byacc`
+Echo flex is `Which flex`
+Echo forward-include is `Which forward-include`
+Echo MoveIfChange is `Which MoveIfChange`
+Echo mpw-touch is `Which mpw-touch`
+Echo mpw-true is `Which mpw-true`
+Echo NewFolderRecursive is `Which NewFolderRecursive`
+Echo null-command is `Which null-command`
+Echo open-brace is `Which open-brace`
+Echo sed is `Which sed`
+Echo 'tr-7to8' is `Which tr-7to8`
+Echo true is `Which true`
+Set Exit 1
 
-Set target_libs ""
+Set host_libs "mmalloc libiberty opcodes bfd readline gash tcl tk tclX"
 
-Set target_tools ""
+Set host_tools "texinfo byacc flex bison binutils ld gas gcc gdb make patch \Option-d
+	    prms send-pr gprof gdbtest tgas etc expect dejagnu sim bash \Option-d
+	    m4 autoconf ispell grep diff rcs cvs fileutils shellutils time \Option-d
+	    textutils wdiff find emacs emacs19 uudecode hello tar gzip indent \Option-d
+	    recode release sed utils guile perl apache inet gawk"
 
+Set target_libs "newlib"
+
+Set target_tools "examples"
+
+# Configure the resource compiler if targeting Macs.
+If {target_os} =~ /macos/ || {target_os} =~ /mpw/
+	Set host_tools "{host_tools} grez"
+End If
+	
 Set configdirs "{host_libs} {host_tools} {target_libs} {target_tools}"
 Export configdirs
 
@@ -20,8 +49,65 @@ End If
 Set edir "{objdir}extra-include:"
 
 forward-include "{srcdir}"include:mpw:sys:file.h "{edir}"'sys/file.h'
+forward-include "{srcdir}"include:mpw:sys:ioctl.h "{edir}"'sys/ioctl.h'
 forward-include "{srcdir}"include:mpw:sys:param.h "{edir}"'sys/param.h'
 forward-include "{srcdir}"include:mpw:sys:resource.h "{edir}"'sys/resource.h'
 forward-include "{srcdir}"include:mpw:sys:stat.h "{edir}"'sys/stat.h'
 forward-include "{srcdir}"include:mpw:sys:time.h "{edir}"'sys/time.h'
 forward-include "{srcdir}"include:mpw:sys:types.h "{edir}"'sys/types.h'
+
+forward-include "{srcroot}"include:aout:aout64.h "{edir}"'aout/aout64.h'
+forward-include "{srcroot}"include:aout:ar.h "{edir}"'aout/ar.h'
+forward-include "{srcroot}"include:aout:ranlib.h "{edir}"'aout/ranlib.h'
+forward-include "{srcroot}"include:aout:reloc.h "{edir}"'aout/reloc.h'
+forward-include "{srcroot}"include:aout:stab.def "{edir}"'aout/stab.def'
+forward-include "{srcroot}"include:aout:stab_gnu.h "{edir}"'aout/stab_gnu.h'
+
+If "`Exists "{srcroot}"include:aout:"{target_cpu}".h`" != ""
+	forward-include "{srcroot}"include:aout:"{target_cpu}".h "{edir}"'aout/'"{target_cpu}"'.h'
+End If
+
+forward-include "{srcroot}"include:coff:ecoff.h "{edir}"'coff/ecoff.h'
+forward-include "{srcroot}"include:coff:internal.h "{edir}"'coff/internal.h'
+forward-include "{srcroot}"include:coff:sym.h "{edir}"'coff/sym.h'
+forward-include "{srcroot}"include:coff:symconst.h "{edir}"'coff/symconst.h'
+
+If "`Exists "{srcroot}"include:coff:"{target_cpu}".h`" != ""
+	forward-include "{srcroot}"include:coff:"{target_cpu}".h "{edir}"'coff/'"{target_cpu}"'.h'
+End If
+If "{target_cpu}" =~ /powerpc/
+	forward-include "{srcroot}"include:coff:rs6000.h "{edir}"'coff/rs6000.h'
+End If
+
+forward-include "{srcroot}"include:elf:common.h "{edir}"'elf/common.h'
+forward-include "{srcroot}"include:elf:dwarf.h "{edir}"'elf/dwarf.h'
+forward-include "{srcroot}"include:elf:dwarf2.h "{edir}"'elf/dwarf2.h'
+forward-include "{srcroot}"include:elf:external.h "{edir}"'elf/external.h'
+forward-include "{srcroot}"include:elf:internal.h "{edir}"'elf/internal.h'
+
+# Believe it or not, GDB needs this for all targets.
+forward-include "{srcroot}"include:elf:mips.h "{edir}"'elf/mips.h'
+
+If "`Exists "{srcroot}"include:elf:"{target_cpu}".h`" != ""
+	forward-include "{srcroot}"include:elf:"{target_cpu}".h "{edir}"'elf/'"{target_cpu}"'.h'
+End If
+If "{target_cpu}" =~ /powerpc/
+	forward-include "{srcroot}"include:elf:ppc.h "{edir}"'elf/ppc.h'
+End If
+
+If "`Exists "{srcroot}"include:opcode:"{target_cpu}".h`" != ""
+	forward-include "{srcroot}"include:opcode:"{target_cpu}".h "{edir}"'opcode/'"{target_cpu}"'.h'
+End If
+If "{target_cpu}" =~ /powerpc/
+	forward-include "{srcroot}"include:opcode:ppc.h "{edir}"'opcode/ppc.h'
+End If
+
+# Add some bfd includes that get mentioned outside the bfd dir.
+	
+forward-include "{srcroot}"bfd:libcoff.h "{edir}"'bfd/libcoff.h'
+forward-include "{srcroot}"bfd:libecoff.h "{edir}"'bfd/libecoff.h'
+
+# Translate random files into MPW-only character set.
+
+tr-7to8 "{srcdir}"mpw-README > "{objdir}Read Me for MPW"
+tr-7to8 "{srcdir}"mpw-install > "{objdir}"Install
diff --git a/mpw-configure b/mpw-configure
index 01e0c8b..cf45148 100644
--- a/mpw-configure
+++ b/mpw-configure
@@ -1,5 +1,5 @@
 # Configuration script
-# Copyright (C) 1994, 1995 Free Software Foundation, Inc.
+# Copyright (C) 1994, 1995, 1996 Free Software Foundation, Inc.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -16,7 +16,7 @@
 # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
 
 ### WARNING
-### This script (and mpw-config.in fragments) must NOT use any 8-bit chars!
+### This script must NOT use any 8-bit chars!
 ### WARNING
 
 # This is an MPW Shell script that sets everything up for compilation,
@@ -38,6 +38,8 @@ Set prefix "{MPW}":GNUTools:
 
 Set exec_prefix ""
 
+Set bindir ""
+
 Set host_alias "m68k-apple-mpw"
 
 Set target_alias {host_alias}
@@ -46,9 +48,16 @@ Set host_cc "mpwc"
 
 Set with_gnu_ld 0
 
+Set helpoutput 0
+
+Set recurse 1
+
 Set verify 0
 Set verifystr ""
 
+Set enable_options ""
+Set disable_options ""
+
 # Parse arguments.
 
 Loop
@@ -56,15 +65,25 @@ Loop
 	If "{1}" =~ /--cc/
 		Set host_cc "{2}"
 		Shift 1
-	Else If "{1}" =~ /--enable/
-		Set "{2}" 1
+	Else If "{1}" =~ /--bindir/
+		Set bindir "{2}"
 		Shift 1
+	Else If "{1}" =~ /--disable-?+/
+		Set `Echo {1} | sed -e 's/--disable-/enable_/'` no
+		Set disable_options "{disable_options} '{1}'"
+	Else If "{1}" =~ /--enable-?+/
+		Set `Echo {1} | sed -e 's/--enable-/enable_/'` yes
+		Set enable_options "{enable_options} '{1}'"
 	Else If "{1}" =~ /--exec-prefix/
 		Set exec_prefix "{2}"
 		Shift 1
+	Else If "{1}" =~ /--help/
+		Set helpoutput 1
 	Else If "{1}" =~ /--host/
 		Set host_alias "{2}"
 		Shift 1
+	Else If "{1}" =~ /--norecursion/
+		Set recurse 0
 	Else If "{1}" =~ /--prefix/
 		Set prefix "{2}"
 		Shift 1
@@ -83,12 +102,35 @@ Loop
 	Else If "{1}" =~ /--with-gnu-ld/
 		Set with_gnu_ld 1
 	Else
-		Echo "{1}" is not a valid argument
+		Echo -n 'mpw-configure: Unrecognized option: "'
+		Echo -n "{1}"
+		Echo '"; use --help for usage.'
 		Exit 1
 	End If
 	Shift 1
 End Loop
 
+If {helpoutput} == 1
+	Echo "Usage: mpw-configure [OPTIONS]"
+	Echo ""
+	Echo "Options: [defaults in brackets]"
+	Echo "--bindir DIR      directory for binaries []"
+	Echo "--cc CC           use C compiler CC [mpwc]"
+	Echo "--disable-FOO     do not include feature FOO"
+	Echo "--enable-FOO      include feature FOO"
+	Echo "--exec-prefix DIR install host-dependent files into DIR []"
+	Echo "--help            print this message"
+	Echo "--host HOST       configure for HOST [m68k-apple-mpw]"
+	Echo "--norecursion     configure this directory only [recurse]"
+	Echo "--prefix DIR      install into DIR [{MPW}:GNUTools:]"
+	Echo "--srcdir DIR      find the sources in DIR [:]"
+	Echo "--srcroot DIR     find the toplevel sources in DIR [:]"
+	Echo "--target TARGET   configure for TARGET [TARGET=HOST]"
+	Echo "-v                verbose"
+	Echo "--with-gnu-ld     link using GNU ld [no]"
+	Exit 0
+End If
+
 Set Exit 0
 
 # Default exec_prefix from prefix.
@@ -97,12 +139,16 @@ If "{exec_prefix}" == ""
 	Set exec_prefix "{prefix}"
 End If
 
+If "{bindir}" == ""
+	Set bindir "{prefix}"bin:
+End If
+
 # Point to the correct set of tools to use with the chosen compiler.
 
 If "{host_cc}" =~ /mpwc/
 	Set host_alias "m68k-apple-mpw"
 	Set cc_name '{CC_MPW_C}'
-	Set segment_flag '-s {Default}'
+	Set segment_flag '-s '
 	Set ar_name '{AR_LIB}'
 	Set ranlib_name '{RANLIB_NULL}'
 	Set cc_ld_name '{CC_LD_LINK}'
@@ -113,7 +159,7 @@ If "{host_cc}" =~ /mpwc/
 Else If "{host_cc}" =~ /sc68k/
 	Set host_alias "m68k-apple-mpw"
 	Set cc_name '{CC_SC}'
-	Set segment_flag '-s {Default}'
+	Set segment_flag '-s '
 	Set ar_name '{AR_LIB}'
 	Set ranlib_name '{RANLIB_NULL}'
 	Set cc_ld_name '{CC_LD_LINK}'
@@ -124,18 +170,18 @@ Else If "{host_cc}" =~ /sc68k/
 Else If "{host_cc}" =~ /mwc68k/
 	Set host_alias "m68k-apple-mpw"
 	Set cc_name '{CC_MWC68K}'
-	Set segment_flag '-s {Default}'
+	Set segment_flag '-s '
 	Set ar_name '{AR_MWLINK68K}'
 	Set ranlib_name '{RANLIB_NULL}'
 	Set cc_ld_name '{CC_LD_MWLINK68K}'
 	Set prog_ext_name '{PROG_EXT_68K}'
-	Set extralibs_name '{EXTRALIBS_C}'
+	Set extralibs_name '{EXTRALIBS_MWC68K}'
 	Set makepef_name '{MAKEPEF_NULL}'
-	Set rez_name '{REZ_PPC}'
+	Set rez_name '{REZ_68K}'
 Else If "{host_cc}" =~ /gcc68k/
 	Set host_alias "m68k-apple-mpw"
 	Set cc_name '{CC_68K_GCC}'
-	Set segment_flag '-s {Default}'
+	Set segment_flag '-s '
 	Set ar_name '{AR_68K_AR}'
 	Set ranlib_name '{RANLIB_RANLIB}'
 	Set cc_ld_name '{CC_68K_GCC}'
@@ -146,7 +192,7 @@ Else If "{host_cc}" =~ /gcc68k/
 Else If "{host_cc}" =~ /ppcc/
 	Set host_alias "powerpc-apple-mpw"
 	Set cc_name '{CC_PPCC}'
-	Set segment_flag ''
+	Set segment_flag '-d ___s_e_g___='
 	Set ar_name '{AR_PPCLINK}'
 	Set ranlib_name '{RANLIB_NULL}'
 	Set cc_ld_name '{CC_LD_PPCLINK}'
@@ -157,7 +203,7 @@ Else If "{host_cc}" =~ /ppcc/
 Else If "{host_cc}" =~ /mrc/
 	Set host_alias "powerpc-apple-mpw"
 	Set cc_name '{CC_MRC}'
-	Set segment_flag ''
+	Set segment_flag '-d ___s_e_g___='
 	Set ar_name '{AR_PPCLINK}'
 	Set ranlib_name '{RANLIB_NULL}'
 	Set cc_ld_name '{CC_LD_PPCLINK}'
@@ -168,7 +214,7 @@ Else If "{host_cc}" =~ /mrc/
 Else If "{host_cc}" =~ /scppc/
 	Set host_alias "powerpc-apple-mpw"
 	Set cc_name '{CC_SC}'
-	Set segment_flag ''
+	Set segment_flag '-d ___s_e_g___='
 	Set ar_name '{AR_PPCLINK}'
 	Set ranlib_name '{RANLIB_NULL}'
 	Set cc_ld_name '{CC_LD_PPCLINK}'
@@ -179,7 +225,7 @@ Else If "{host_cc}" =~ /scppc/
 Else If "{host_cc}" =~ /mwcppc/
 	Set host_alias "powerpc-apple-mpw"
 	Set cc_name '{CC_MWCPPC}'
-	Set segment_flag ''
+	Set segment_flag '-d ___s_e_g___='
 	Set ar_name '{AR_MWLINKPPC}'
 	Set ranlib_name '{RANLIB_NULL}'
 	Set cc_ld_name '{CC_LD_MWLINKPPC}'
@@ -191,12 +237,13 @@ Else If "{host_cc}" =~ /mwcppc/
 Else If "{host_cc}" =~ /gccppc/
 	Set host_alias "powerpc-apple-mpw"
 	Set cc_name '{CC_PPC_GCC}'
-	Set segment_flag ''
+	Set segment_flag '-d ___s_e_g___='
 	Set ar_name '{AR_PPCLINK}'
-	Set ranlib_name '{RANLIB_RANLIB}'
 	If {with_gnu_ld} == 1
+		Set ranlib_name '{RANLIB_RANLIB}'
 		Set cc_ld_name '{CC_LD_GLD}'
 	Else
+		Set ranlib_name '{RANLIB_NULL}'
 		Set cc_ld_name '{CC_LD_PPCLINK}'
 	End If
 	Set prog_ext_name '{PROG_EXT_XCOFF}'
@@ -207,6 +254,13 @@ Else
 	Echo "{host_cc}" is not a known MPW compiler type
 End If
 
+Set dash_c_flag ''
+If "{host_cc}" =~ /gcc68k/
+	Set dash_c_flag '-c'
+Else If "{host_cc}" =~ /gccppc/
+	Set dash_c_flag '-c'
+End If
+
 # (should interpret aliases if not in canonical form)
 
 Set host_canonical "{host_alias}"
@@ -241,7 +295,7 @@ End If
 # dependencies on config.status.
 
 Echo "# This directory was configured as follows:" >config.new
-Echo "{ThisScript} --host {host_alias} --target {target_alias} --srcdir {srcdir}  --srcroot {srcroot}  --prefix {prefix} --cc {host_cc}" >>config.new
+Echo "{ThisScript} --host {host_alias} --target {target_alias} --srcdir {srcdir}  --srcroot {srcroot}  --prefix {prefix} --cc {host_cc} {verifystr} {enable_options} {disable_options} --norecursion" >>config.new
 MoveIfChange config.new config.status
 
 If "`Exists "{srcdir}"mpw-config.in`" != ""
@@ -258,6 +312,7 @@ Echo "topsrcdir = " {srcroot}			>> "{objdir}"Makefile.tem
 Echo "srcdir = " {srcdir}			>> "{objdir}"Makefile.tem
 Echo "mpw_prefix = " {prefix}			>> "{objdir}"Makefile.tem
 Echo "mpw_exec_prefix = " {exec_prefix}		>> "{objdir}"Makefile.tem
+Echo "mpw_bindir = " {bindir}			>> "{objdir}"Makefile.tem
 Echo "host_alias = " {host_alias}		>> "{objdir}"Makefile.tem
 Echo "target_alias = " {target_alias}		>> "{objdir}"Makefile.tem
 Echo "target_cpu = " {target_cpu}		>> "{objdir}"Makefile.tem
@@ -275,6 +330,16 @@ Echo "EXTRALIBS = " {extralibs_name}		>> "{objdir}"Makefile.tem
 Echo "MAKEPEF = " {makepef_name}		>> "{objdir}"Makefile.tem
 Echo "REZ = " {rez_name}			>> "{objdir}"Makefile.tem
 
+If {host_cc} =~ /gccppc/
+	Echo -n "dq =\Option-d\Option-d\Option-d" > "{objdir}"Makefile.tem0
+	Echo '"' 				 >> "{objdir}"Makefile.tem0
+	tr-7to8  "{objdir}"Makefile.tem0	>>"{objdir}"Makefile.tem
+Else
+	Echo -n "dq ='" 			>> "{objdir}"Makefile.tem
+	Echo -n '"' 				>> "{objdir}"Makefile.tem
+	Echo    "'" 				>> "{objdir}"Makefile.tem
+End If
+
 # Append the master set of definitions for the various compilers.
 
 If "`Exists "{srcdir}"config:mpw-mh-mpw`" != ""
@@ -304,15 +369,25 @@ If "`Exists "{srcdir}"mpw-make.sed`" != ""
 	Else
 		Set MakefileIn "{srcdir}"Makefile.in
 	End If
-	If "`Exists "{srcroot}"utils:mpw:g-mpw-make.sed`" != ""
+	# Find the generic makefile editing script.
+	If "`Exists "{srcroot}"config:mpw:g-mpw-make.sed`" != ""
+		sed -f "{srcroot}"config:mpw:g-mpw-make.sed "{MakefileIn}" >"{objdir}"Makefile.tem1
+	Else If "`Exists "{srcroot}"utils:mpw:g-mpw-make.sed`" != ""
 		sed -f "{srcroot}"utils:mpw:g-mpw-make.sed "{MakefileIn}" >"{objdir}"Makefile.tem1
+	Else If "`Exists "{srcdir}"g-mpw-make.sed`" != ""
+		sed -f "{srcdir}"g-mpw-make.sed "{MakefileIn}" >"{objdir}"Makefile.tem1
 	Else
+		Echo Warning: g-mpw-make.sed not found, copying "{MakefileIn}" verbatim...
 		Catenate "{MakefileIn}" >"{objdir}"Makefile.tem1
 	End If
 	sed -f "{srcdir}"mpw-make.sed "{objdir}"Makefile.tem1 >"{objdir}"Makefile.tem2
-	sed -e 's/^prefix = .*$/prefix = {mpw_prefix}/g' -e 's/^exec_prefix = .*$/exec_prefix = {mpw_exec_prefix}/g' "{objdir}"Makefile.tem2 >"{objdir}"Makefile.tem3
-	sed -e "s/@SEGMENT_FLAG@/{segment_flag}/" "{objdir}"Makefile.tem3 >"{objdir}"mpw-make.in
+	sed -e 's/^prefix = .*$/prefix = {mpw_prefix}/g' -e 's/^exec_prefix = .*$/exec_prefix = {mpw_exec_prefix}/g' -e 's/^bindir = @bindir@/bindir = {mpw_bindir}/g' "{objdir}"Makefile.tem2 >"{objdir}"Makefile.tem3
+	sed -e "s/@DASH_C_FLAG@/{dash_c_flag}/" -e "s/@SEGMENT_FLAG(\([^)]*\))@/{segment_flag}\1/" "{objdir}"Makefile.tem3 >"{objdir}"mpw-make.in
 	tr-7to8 "{objdir}"mpw-make.in >>"{objdir}"Makefile.tem
+	If "`Exists "{objdir}"mk.sed`" != ""
+		sed -f "{objdir}"mk.sed "{objdir}"Makefile.tem >"{objdir}"Makefile.tem2
+		Rename -y "{objdir}"Makefile.tem2 "{objdir}"Makefile.tem
+	End If
 	MoveIfChange "{objdir}"Makefile.tem "{objdir}"Makefile
 	Delete -i -y "{objdir}"Makefile.tem[12]
 	If {verify} == 1
@@ -320,8 +395,12 @@ If "`Exists "{srcdir}"mpw-make.sed`" != ""
 	End If
 Else If "`Exists "{srcdir}"mpw-make.in`" != ""
 	sed -e 's/^prefix = .*$/prefix = {mpw_prefix}/g' "{srcdir}"mpw-make.in >"{objdir}"Makefile.tem1
-	sed -e "s/@SEGMENT_FLAG@/{segment_flag}/" "{objdir}"Makefile.tem1 >"{objdir}"Makefile.tem2
+	sed -e "s/@DASH_C_FLAG@/{dash_c_flag}/" -e "s/@SEGMENT_FLAG(\([^)]*\))@/{segment_flag}}\1/" "{objdir}"Makefile.tem1 >"{objdir}"Makefile.tem2
 	tr-7to8 "{objdir}"Makefile.tem2 >>"{objdir}"Makefile.tem
+	If "`Exists "{objdir}"mk.sed`" != ""
+		sed -f "{objdir}"mk.sed "{objdir}"Makefile.tem >"{objdir}"Makefile.tem2
+		Rename -y "{objdir}"Makefile.tem2 "{objdir}"Makefile.tem
+	End If
 	MoveIfChange "{objdir}"Makefile.tem "{objdir}"Makefile
 	Delete -i -y "{objdir}"Makefile.tem[12]
 	If {verify} == 1
@@ -343,21 +422,27 @@ If "`Exists "{srcdir}"mpw-build.in`" != ""
 	End If
 End If
 
-For subdir In {configdirs}
-	Set savedir "`Directory`"
-	If "`Exists "{srcdir}{subdir}:"`" == ""
-		Echo Strange, no {subdir} in {srcdir}
-		Continue
-	End If
-	If {verify} == 1
-		Echo Configuring {subdir}...
-	End If
-	If "`Exists "{objdir}{subdir}:"`" == ""
-		NewFolder "{objdir}{subdir}"
-	End If
-	SetDirectory "{objdir}{subdir}:"
-	"{ThisScript}" --target "{target_canonical}" --srcdir "{srcdir}{subdir}:" --srcroot "{srcroot}" --prefix "{prefix}" --cc "{host_cc}" {verifystr}
-	SetDirectory "{savedir}"
-End For
+# Apply ourselves recursively to the list of subdirectories to configure.
+
+If {recurse} == 1
+	For subdir In {configdirs}
+		Set savedir "`Directory`"
+		If "`Exists "{srcdir}{subdir}:"`" == ""
+			If {verify} == 1
+				Echo No "{srcdir}{subdir}:" found, skipping
+			End If
+			Continue
+		End If
+		If {verify} == 1
+			Echo Configuring {subdir}...
+		End If
+		If "`Exists "{objdir}{subdir}:"`" == ""
+			NewFolder "{objdir}{subdir}"
+		End If
+		SetDirectory "{objdir}{subdir}:"
+		"{ThisScript}" --target "{target_canonical}" --srcdir "{srcdir}{subdir}:" --srcroot "{srcroot}" --prefix "{prefix}" --cc "{host_cc}" {verifystr} {enable_options} {disable_options}
+		SetDirectory "{savedir}"
+	End For
+End If
 
 SetDirectory "{savedir}"
diff --git a/mpw-install b/mpw-install
new file mode 100644
index 0000000..04c5aac
--- /dev/null
+++ b/mpw-install
@@ -0,0 +1,122 @@
+# GNU Install script for MPW.
+
+Set OldExit "{Exit}"
+Set Exit 0
+
+Set TempUserStartup "{TempFolder}"__temp__UserStartup
+
+Echo '# UserStartup generated by GNU Install script' > "{TempUserStartup}"
+Echo ''						>> "{TempUserStartup}"
+
+# (should) Check that disk space is sufficient for installation.
+
+# Assume that the install script is where everything else is.
+
+Set thisdir "`Directory`"
+
+# Copy the binaries to the desired place.
+
+Confirm -t "Copy the binaries to somewhere else?"
+Set TmpStatus {Status}
+If {TmpStatus} == 0
+	Set bindest "`GetFileName -d -m "Where to install the binaries?"`"
+	If {Status} == 0
+		If "`Exists "{thisdir}bin"`" != ""
+			For afile In "{thisdir}"bin:\Option-x
+				Duplicate -y "{afile}" "{bindest}"
+			End For
+		Else
+			Echo "bin directory not found, exiting"
+			Exit 1
+		End If
+	Else
+		Echo "No destination supplied, exiting"
+		Exit 1
+	End If
+Else If {TmpStatus} == 4
+	# Use the existing directory.
+	Set bindest "{thisdir}bin:"
+Else
+	# Cancelled from confirmation, escape altogether.
+	Exit 1
+End If
+
+# Copy the libraries to the desired place.
+
+Confirm -t "Copy the libraries to somewhere else?"
+Set TmpStatus {Status}
+If {TmpStatus} == 0
+	Set libdest "`GetFileName -d -m "Where to install the libraries?"`"
+	If {Status} == 0
+		If "`Exists "{thisdir}lib:"`" != ""
+			For afile In "{thisdir}"lib:\Option-x
+				Duplicate -y "{afile}" "{libdest}"
+			End For
+		Else
+			Echo "lib directory not found, exiting"
+			Exit 1
+		End If
+	Else
+		Echo "No destination supplied, exiting"
+		Exit 1
+	End If
+Else If {TmpStatus} == 4
+	# Use the existing directory.
+	Set libdest "{thisdir}lib:"
+Else
+	# Cancelled from confirmation, escape altogether.
+	Exit 1
+End If
+
+
+# Add the location of the binaries to the command path.
+
+Echo -n 'Set Commands "'			>> "{TempUserStartup}"
+Echo -n "{bindest}"				>> "{TempUserStartup}"
+Echo    ',{Commands}"'				>> "{TempUserStartup}"
+Echo ''						>> "{TempUserStartup}"
+
+# Set up GCC exec prefix.
+
+Set gcclibdir "{libdest}"gcc-lib:
+
+Echo -n 'Set GCC_EXEC_PREFIX "'			>> "{TempUserStartup}"
+Echo -n "{gcclibdir}"				>> "{TempUserStartup}"
+Echo    '"'					>> "{TempUserStartup}"
+Echo "Export GCC_EXEC_PREFIX"			>> "{TempUserStartup}"
+Echo ''						>> "{TempUserStartup}"
+
+# Set up path to libgcc.xcoff etc.
+
+Echo -n 'Set GCCPPCLibraries "'			>> "{TempUserStartup}"
+Echo -n "{libdest}"				>> "{TempUserStartup}"
+Echo    '"'					>> "{TempUserStartup}"
+Echo "Export GCCPPCLibraries"			>> "{TempUserStartup}"
+Echo ''						>> "{TempUserStartup}"
+
+# Display contents of UserStartup, confirm installation.
+
+Set UserStartupName "UserStartup\Option-8GNU"
+
+Echo "Contents of" {UserStartupName} "will be:"
+Catenate "{TempUserStartup}"
+
+Confirm "Install {UserStartupName} into the MPW folder {MPW} ?"
+If {Status} == 0
+	Duplicate "{TempUserStartup}" "{MPW}{UserStartupName}"
+	Delete -y "{TempUserStartup}"
+Else
+	Echo "{UserStartupName} file not installed"
+End If
+
+# (should) Check HEXA resource, warn if low.
+
+# (should) Check for spaces in pathnames, warn if found.
+
+Echo "Installation was successful."
+Echo ""
+Echo "Be sure to review the usage notes in 'Read Me for MPW' before proceeding!"
+
+# Restore previous settings.
+
+Set Exit "{OldExit}"
diff --git a/symlink-tree b/symlink-tree
new file mode 100755
index 0000000..096582d
--- /dev/null
+++ b/symlink-tree
@@ -0,0 +1,48 @@
+#!/bin/sh
+# Create a symlink tree.
+#
+# Syntax: symlink-tree srcdir "ignore1 ignore2 ..."
+#
+# where srcdir is the directory to create a symlink tree to,
+# and "ignoreN" is a list of files/directories to ignore.
+
+prog=$0
+srcdir=$1
+ignore="$2"
+
+ignore_additional=". .. CVS"
+
+# If we were invoked with a relative path name, adjust ${prog} to work
+# in subdirs.
+case ${prog} in
+/*) ;;
+*) prog=../${prog} ;;
+esac
+
+# Set newsrcdir to something subdirectories can use.
+case ${srcdir} in
+/*) newsrcdir=${srcdir} ;;
+*) newsrcdir=../${srcdir} ;;
+esac
+
+for f in `ls -a ${srcdir}`; do
+  if [ -d ${srcdir}/$f ]; then
+    found=
+    for i in ${ignore} ${ignore_additional}; do
+      if [ "$f" = "$i" ]; then
+	found=yes
+      fi
+    done
+    if [ -z "${found}" ]; then
+      echo "$f		..working in"
+      if [ -d $f ]; then true; else mkdir $f; fi
+      (cd $f; ${prog} ${newsrcdir}/$f "${ignore}")
+    fi
+  else
+    echo "$f		..linked"
+    rm -f $f
+    ln -s ${srcdir}/$f .
+  fi
+done
+
+exit 0
diff --git a/ylwrap b/ylwrap
index 2d0f97f..2288ccd 100755
--- a/ylwrap
+++ b/ylwrap
@@ -31,7 +31,7 @@ prog="$1"
 shift
 # Make any relative path in $prog absolute.
 case "$prog" in
- /*) ;;
+ /* | [A-Za-z]:\\*) ;;
  */*) prog="`pwd`/$prog" ;;
 esac
 
@@ -75,7 +75,7 @@ mkdir $dirname || exit 1
 
 cd $dirname
 case "$input" in
- /*)
+ /* | [A-Za-z]:\\*)
     # Absolute path; do nothing.
     ;;
  *)
@@ -95,7 +95,7 @@ if test $status -eq 0; then
          # If $2 is an absolute path name, then just use that,
          # otherwise prepend `../'.
          case "$2" in
-	   /*) target="$2";;
+	   /* | [A-Za-z]:\\*) target="$2";;
 	   *) target="../$2";;
 	 esac
 	 mv "$1" "$target" || status=$?