gdb/

	* linux-nat.c (linux_nat_wait): Only use set_ignore_sigint in
	all-stop mode.

gdb/testsuite/
	* lib/mi-support.exp (mi_expect_interrupt): New.
	(mi_reverse_list, mi_check_thread_states): New, moved and renamed
	from gdb.mi/mi-nonstop.exp.
	* gdb.mi/mi-nsintrall.exp, gdb.mi/nsintrall.c: New.
	* gdb.mi/mi-nonstop.exp (myreverse, check_thread_states): Moved to
	lib/mi-support.exp.
	Use mi_check_thread_states throughout.  Avoid ".*" and do not
	require an anchor after -exec-run.

7 files changed, 318 insertions, 42 deletions

diff --git a/gdb/ChangeLog b/gdb/ChangeLog
index c9a6de9..69fbac8 100644
--- a/gdb/ChangeLog
+++ b/gdb/ChangeLog
@@ -1,3 +1,8 @@
+2008-09-22  Pedro Alves  <pedro@codesourcery.com>
+
+	* linux-nat.c (linux_nat_wait): Only use set_ignore_sigint in
+	all-stop mode.
+
 2008-09-19  Andrew Stubbs  <ams@codesourcery.com>
 
 	* MAINTAINERS: Update my email address.
diff --git a/gdb/linux-nat.c b/gdb/linux-nat.c
index 42e19b5..bbf8fb7 100644
--- a/gdb/linux-nat.c
+++ b/gdb/linux-nat.c
@@ -2946,18 +2946,24 @@ retry:
 	  goto retry;
 	}
 
-      if (signo == TARGET_SIGNAL_INT && signal_pass_state (signo) == 0)
+      if (!non_stop)
 	{
-	  /* If ^C/BREAK is typed at the tty/console, SIGINT gets
-	     forwarded to the entire process group, that is, all LWPs
-	     will receive it - unless they're using CLONE_THREAD to
-	     share signals.  Since we only want to report it once, we
-	     mark it as ignored for all LWPs except this one.  */
-	  iterate_over_lwps (set_ignore_sigint, NULL);
-	  lp->ignore_sigint = 0;
+	  /* Only do the below in all-stop, as we currently use SIGINT
+	     to implement target_stop (see linux_nat_stop) in
+	     non-stop.  */
+	  if (signo == TARGET_SIGNAL_INT && signal_pass_state (signo) == 0)
+	    {
+	      /* If ^C/BREAK is typed at the tty/console, SIGINT gets
+		 forwarded to the entire process group, that is, all LWPs
+		 will receive it - unless they're using CLONE_THREAD to
+		 share signals.  Since we only want to report it once, we
+		 mark it as ignored for all LWPs except this one.  */
+	      iterate_over_lwps (set_ignore_sigint, NULL);
+	      lp->ignore_sigint = 0;
+	    }
+	  else
+	    maybe_clear_ignore_sigint (lp);
 	}
-      else
-	maybe_clear_ignore_sigint (lp);
     }
 
   /* This LWP is stopped now.  */
diff --git a/gdb/testsuite/ChangeLog b/gdb/testsuite/ChangeLog
index 392519d..d2478c1 100644
--- a/gdb/testsuite/ChangeLog
+++ b/gdb/testsuite/ChangeLog
@@ -1,3 +1,14 @@
+2008-09-22  Pedro Alves  <pedro@codesourcery.com>
+
+	* lib/mi-support.exp (mi_expect_interrupt): New.
+	(mi_reverse_list, mi_check_thread_states): New, moved and renamed
+	from gdb.mi/mi-nonstop.exp.
+	* gdb.mi/mi-nsintrall.exp, gdb.mi/nsintrall.c: New.
+	* gdb.mi/mi-nonstop.exp (myreverse, check_thread_states): Moved to
+	lib/mi-support.exp.
+	Use mi_check_thread_states throughout.  Avoid ".*" and do not
+	require an anchor after -exec-run.
+
 2008-09-13  Daniel Jacobowitz  <dan@codesourcery.com>
 
 	* gdb.mi/mi-nonstop.exp: Do not check thread state while a
diff --git a/gdb/testsuite/gdb.mi/mi-nonstop.exp b/gdb/testsuite/gdb.mi/mi-nonstop.exp
index 0bcfe41..0e6e130 100644
--- a/gdb/testsuite/gdb.mi/mi-nonstop.exp
+++ b/gdb/testsuite/gdb.mi/mi-nonstop.exp
@@ -26,29 +26,6 @@ if {[mi_gdb_start]} {
     continue
 }
 
-proc myreverse { list } {
-    if { [llength $list] <= 1 } {
-        return $list
-    }
-    set tail [lrange $list 1 [llength $list]]
-    set rtail [myreverse $tail]
-    lappend rtail [lindex $list 0]
-    return $rtail
-}
-
-proc check_thread_states { xstates test } {
-    global expect_out
-    set states [myreverse $xstates]
-    set pattern "\\^done,threads=\\\["
-    foreach s $states {
-        set pattern "${pattern}(.*)state=\"$s\""
-    }
-    set pattern "$pattern\\\}\\\].*"
-
-    verbose -log "expecting: $pattern"
-    mi_gdb_test "-thread-info" $pattern $test
-}
-
 #
 # Start here
 #
@@ -81,18 +58,24 @@ mi_gdb_test "-gdb-set target-async 1" ".*"
 detect_async
 
 mi_gdb_test "200-break-insert -t main" ".*"
+
+set created "=thread-created,id=\"$decimal\"\r\n"
+set running "\\*running,thread-id=\"$decimal\"\r\n"
+
+set notifs "($created)*($running)*"
+
 # Note: presently, we skip this test on non-native targets,
 # so 'run' is OK.  As soon as we start to run this on remote
 # target, the logic from mi_run_cmd will have to be refactored.
 send_gdb "-exec-run\n"
 gdb_expect {
-    -re ".*\\^running.*$mi_gdb_prompt$" {
+    -re "\\^running\r\n$notifs$mi_gdb_prompt" {
     }
     -re "\\^error,msg=\"The target does not support running in non-stop mode.\"" {
         verbose -log "Non-stop mode not supported, skipping all tests"
         return
     }
-    -re ".*\r\n$mi_gdb_prompt$" {
+    -re "\r\n$mi_gdb_prompt" {
         perror "Cannot start target (unknown output after running)"
         return -1
     }
@@ -109,7 +92,7 @@ mi_send_resuming_command "exec-continue" "resume 1"
 mi_expect_stop "breakpoint-hit" "break_at_me" ".*" "non-stop.c" ".*" {"" "disp=\"keep\""} "w0,i0 stop"
 mi_expect_stop "breakpoint-hit" "break_at_me" ".*" "non-stop.c" ".*" {"" "disp=\"keep\""} "w1,i0 stop"
 
-check_thread_states {"running" "stopped" "stopped"} "thread state, stop 1"
+mi_check_thread_states {"running" "stopped" "stopped"} "thread state, stop 1"
 
 mi_gdb_test "-thread-select 2" "\\^done.*" "select thread 2"
 mi_create_varobj I_W0 "i" "create varobj in first thread"
@@ -117,14 +100,14 @@ mi_gdb_test "-thread-select 3" "\\^done.*" "select thread 3"
 mi_create_varobj I_W1 "i" "create varobj in second thread" 
 
 mi_send_resuming_command "exec-continue --thread 2" "resume 1"
-check_thread_states {"running" "running" "stopped"} "thread state, resume 1"
+mi_check_thread_states {"running" "running" "stopped"} "thread state, resume 1"
 mi_expect_stop "breakpoint-hit" "break_at_me" ".*" "non-stop.c" ".*" {"" "disp=\"keep\""} "w0,i1 stop"
-check_thread_states {"running" "stopped" "stopped"} "thread state, stop 2"
+mi_check_thread_states {"running" "stopped" "stopped"} "thread state, stop 2"
 
 mi_send_resuming_command "exec-continue --thread 3" "resume 2"
-check_thread_states {"running" "stopped" "running"} "thread state, resume 2"
+mi_check_thread_states {"running" "stopped" "running"} "thread state, resume 2"
 mi_expect_stop "breakpoint-hit" "break_at_me" ".*" "non-stop.c" ".*" {"" "disp=\"keep\""} "w1,i1 stop"
-check_thread_states {"running" "stopped" "stopped"} "thread state, stop 3"
+mi_check_thread_states {"running" "stopped" "stopped"} "thread state, stop 3"
 
 mi_varobj_update * {I_W1 I_W0} "update varobj, 1"
 mi_check_varobj_value I_W0 1 "check varobj, w0, 1"
@@ -143,7 +126,7 @@ gdb_expect {
 # thread might not be stopped immediately when we return from the target.
 # So, wait a bit
 sleep 1
-check_thread_states {"stopped" "stopped" "stopped"} "thread state, stop 4"
+mi_check_thread_states {"stopped" "stopped" "stopped"} "thread state, stop 4"
 
 send_gdb "-exec-continue --all\n"
 gdb_expect {
@@ -168,7 +151,7 @@ mi_send_resuming_command "exec-continue --thread 3" "resume 3"
 
 sleep 2
 mi_expect_stop "breakpoint-hit" "break_at_me" ".*" "non-stop.c" ".*" {"" "disp=\"keep\""} "w0,i3 stop"
-check_thread_states {"running" "running" "stopped"} "thread state, stop on cond breakpoint"
+mi_check_thread_states {"running" "running" "stopped"} "thread state, stop on cond breakpoint"
 
 # Check that when we update all varobj, we don't get no error about varobj
 # bound to running thread.
diff --git a/gdb/testsuite/gdb.mi/mi-nsintrall.exp b/gdb/testsuite/gdb.mi/mi-nsintrall.exp
new file mode 100644
index 0000000..7d2acc0
--- /dev/null
+++ b/gdb/testsuite/gdb.mi/mi-nsintrall.exp
@@ -0,0 +1,149 @@
+# Copyright 2008 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# This only works with native configurations
+if {![isnative]} {
+  return
+}
+
+load_lib mi-support.exp
+set MIFLAGS "-i=mi"
+
+gdb_exit
+if {[mi_gdb_start]} {
+    continue
+}
+
+#
+# Start here
+#
+set testfile "nsintrall"
+set srcfile "$testfile.c"
+set binfile "$objdir/$subdir/mi-$testfile"
+
+set options [list debug incdir=$objdir]
+if {[gdb_compile_pthreads "$srcdir/$subdir/$srcfile" $binfile executable $options] != "" } {
+    return -1
+}
+
+mi_gdb_reinitialize_dir $srcdir/$subdir
+mi_gdb_load $binfile
+
+set supported 0
+send_gdb "-gdb-show non-stop\n"
+gdb_expect {
+    -re ".*\\^done,value=\"off\",supported=\"(\[^\"\]+)\"\r\n$mi_gdb_prompt$" {
+	if { $expect_out(1,string) == "1" } {
+	    set supported 1
+	}
+    }
+    -re ".$mi_gdb_prompt$" {
+    }
+}
+
+mi_gdb_test "-gdb-set non-stop 1" ".*"
+mi_gdb_test "-gdb-set target-async 1" ".*"
+detect_async
+
+mi_gdb_test "200-break-insert -t main" ".*"
+
+set created "=thread-created,id=\"$decimal\"\r\n"
+set running "\\*running,thread-id=\"$decimal\"\r\n"
+
+set notifs "($created)*($running)*"
+
+# Note: presently, we skip this test on non-native targets,
+# so 'run' is OK.  As soon as we start to run this on remote
+# target, the logic from mi_run_cmd will have to be refactored.
+send_gdb "-exec-run\n"
+gdb_expect {
+    -re "\\^running\r\n$notifs$mi_gdb_prompt" {
+    }
+    -re "\\^error,msg=\"The target does not support running in non-stop mode.\"" {
+	verbose -log "Non-stop mode not supported, skipping all tests"
+	return
+    }
+    -re "\r\n$mi_gdb_prompt" {
+	perror "Cannot start target (unknown output after running)"
+	return -1
+    }
+    timeout {
+	perror "Cannot start target (timeout)"
+	return -1
+    }
+}
+mi_expect_stop "breakpoint-hit" main ".*" ".*" "\[0-9\]+" \
+    { "" "disp=\"del\"" } "run to main"
+
+mi_create_breakpoint thread_function 2 keep thread_function .* .* .* \
+    "breakpoint at thread_function"
+
+mi_send_resuming_command "exec-continue --all" "resume all"
+for {set i 0} {$i < 6} {incr i} {
+    mi_expect_stop "breakpoint-hit" "thread_function" "\[^\n\]*" "$srcfile" \
+	"\[0-9\]*" {"" "disp=\"keep\""} "stop $i"
+}
+
+mi_check_thread_states \
+    {"stopped" "stopped" "stopped" "stopped" "stopped" "stopped"} \
+    "thread state, all stopped"
+
+# now that we know about all the threads, we can get rid of the breakpoints
+mi_delete_breakpoints
+
+set running_re ""
+for {set i 6} {$i > 0} {incr i -1} {
+    set running_re "$running_re\\*running,thread-id=\"$i\"\r\n"
+}
+
+send_gdb "-exec-continue --all\n"
+gdb_expect {
+    -re ".*$running_re$mi_gdb_prompt" {
+	pass "resume all, no breakpoint"
+    }
+    timeout {
+	fail "resume all, no breakpoint (timeout)"
+    }
+}
+mi_check_thread_states \
+    {"running" "running" "running" "running" "running" "running"} \
+    "thread state, resume all"
+
+mi_gdb_test "200-exec-interrupt --all" "200\\^done" "interrupt all threads"
+
+for {set i 0} {$i < 6} {incr i} {
+    mi_expect_interrupt "interrupt $i"
+}
+mi_check_thread_states \
+    {"stopped" "stopped" "stopped" "stopped" "stopped" "stopped"} \
+    "thread state, all interrupted"
+
+# resume all threads, and check that no thread is spuriously left interrupted
+send_gdb "-exec-continue --all\n"
+gdb_expect {
+    -re ".*$running_re$mi_gdb_prompt" {
+	pass "resume all after interrupting"
+    }
+    timeout {
+	fail "resume all after interrupting (timeout)"
+    }
+}
+
+sleep 1
+mi_check_thread_states \
+    {"running" "running" "running" "running" "running" "running"} \
+    "thread state, resume all after interrupting"
+
+mi_gdb_exit
diff --git a/gdb/testsuite/gdb.mi/nsintrall.c b/gdb/testsuite/gdb.mi/nsintrall.c
new file mode 100644
index 0000000..187a2cb
--- /dev/null
+++ b/gdb/testsuite/gdb.mi/nsintrall.c
@@ -0,0 +1,64 @@
+/* This testcase is part of GDB, the GNU debugger.
+
+   Copyright 2002, 2003, 2004, 2007, 2008 Free Software Foundation, Inc.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 3 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#include <stdio.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <pthread.h>
+
+void *thread_function(void *arg); /* Pointer to function executed by each thread */
+
+#define NUM 5
+
+unsigned int args[NUM+1];
+
+int main() {
+    int res;
+    pthread_t threads[NUM];
+    void *thread_result;
+    long i;
+
+    for (i = 1; i <= NUM; i++)
+      {
+	args[i] = 1;
+	res = pthread_create(&threads[i],
+		             NULL,
+			     thread_function,
+			     (void *) i);
+      }
+
+    /* last thread start.  */
+    args[0] = 1;
+    thread_function ((void *) 0);
+
+    exit(EXIT_SUCCESS);
+}
+
+void *thread_function(void *arg) {
+    int my_number =  (long) arg;
+    int *myp = (int *) &args[my_number];
+
+    /* Don't run forever.  Run just short of it :)  */
+    while (*myp > 0)
+      {
+	/* main loop.  */
+	(*myp) ++;
+	usleep (1);
+      }
+
+    pthread_exit(NULL);
+}
diff --git a/gdb/testsuite/lib/mi-support.exp b/gdb/testsuite/lib/mi-support.exp
index 0d8c8a6..71c0f59 100644
--- a/gdb/testsuite/lib/mi-support.exp
+++ b/gdb/testsuite/lib/mi-support.exp
@@ -1037,6 +1037,42 @@ proc mi_expect_stop { reason func args file line extra test } {
     }    
 }
 
+# Wait for MI *stopped notification related to an interrupt request to
+# appear.
+proc mi_expect_interrupt { test } {
+    global mi_gdb_prompt
+    global decimal
+    global async
+
+    if {$async} {
+	set prompt_re ""
+    } else {
+	set prompt_re "$mi_gdb_prompt$"
+    }
+
+    set r "reason=\"signal-received\",signal-name=\"SIGINT\",signal-meaning=\"Interrupt\""
+
+    set any "\[^\n\]*"
+
+    # A signal can land anywhere, just ignore the location
+    verbose -log "mi_expect_interrupt: expecting: \\*stopped,${r},thread-id=\"$decimal\",stopped-threads=$any\r\n$prompt_re"
+    gdb_expect {
+	-re "\\*stopped,${r},thread-id=\"$decimal\",stopped-threads=$any\r\n$prompt_re" {
+	    pass "$test"
+	    return 0;
+	}
+	-re ".*\r\n$mi_gdb_prompt$" {
+	    verbose -log "got $expect_out(buffer)"
+	    fail "$test (unknown output after running)"
+	    return -1
+	}
+	timeout {
+	    fail "$test (timeout)"
+	    return -1
+	}
+    }
+}
+
 # cmd should not include the number or newline (i.e. "exec-step 3", not
 # "220-exec-step 3\n"
 
@@ -1704,3 +1740,25 @@ proc mi_load_shlibs { args } {
     mi_gdb_test "set solib-search-path [file dirname [lindex $args 0]]" "\^done" ""
 }
 
+proc mi_reverse_list { list } {
+    if { [llength $list] <= 1 } {
+	return $list
+    }
+    set tail [lrange $list 1 [llength $list]]
+    set rtail [mi_reverse_list $tail]
+    lappend rtail [lindex $list 0]
+    return $rtail
+}
+
+proc mi_check_thread_states { xstates test } {
+    global expect_out
+    set states [mi_reverse_list $xstates]
+    set pattern "\\^done,threads=\\\["
+    foreach s $states {
+	set pattern "${pattern}(.*)state=\"$s\""
+    }
+    set pattern "$pattern\\\}\\\].*"
+
+    verbose -log "expecting: $pattern"
+    mi_gdb_test "-thread-info" $pattern $test
+}