path: root/gcc/ChangeLog

2005-01-11  Stan Shebs  <shebs@apple.com>

	* config/rs6000/rs6000.c (machopic_output_stub): Issue
	ldu instead of lwzu if 64-bit -mdynamic-no-pic.

2005-01-11  Andrew Pinski  <pinskia@physics.uc.edu>

	PR target/18761
	* config/rs6000/rs6000.c (rs6000_special_round_type_align):
	Skip all DECLs except for FIELD_DECLs.

2005-01-11  Andreas Krebbel  <krebbel1@de.ibm.com>

	* config/s390/s390.c (override_options): Return error if
	-mbackchain, -mpacked-stack and -mhard-float are used together.
	(s390_va_start): Remove the backchain && packed-stack special case.
	(s390_gimplify_va_arg): Likewise.
	* doc/invoke.texi: Remove the ABI incompatibility note.

2005-01-11  Andreas Krebbel  <krebbel1@de.ibm.com>

	* config/s390/s390.c (struct s390_frame_layout): Remove 
	save_backchain_p.
	(s390_frame_info, s390_emit_prologue): Replace occurrences of
	save_backchain_p with TARGET_BACKCHAIN.

2005-01-11  Alan Modra  <amodra@bigpond.net.au>

	PR target/18916
	* builtins.c (std_gimplify_va_arg_expr): Adjust alignment of *ap.
	* expr.h (struct locate_and_pad_arg_data): Add "boundary".
	* function.c (locate_and_pad_parm): Set new field.
	(assign_parm_find_stack_rtl): Use it instead of FUNCTION_ARG_BOUNDARY.
	Tweak where_pad test to include "none".  Always set mem align for
	stack_parm.
	(assign_parm_adjust_stack_rtl): Discard stack_parm if alignment
	not sufficient for type.
	(assign_parm_setup_block): If stack_parm is zero on entry, always
	make a new stack local.  Block move old stack parm if necessary
	to new aligned stack local.
	(assign_parm_setup_stack): Use a block move to handle
	potentially misaligned entry_parm.
	(assign_parms_unsplit_complex): Specify required alignment when
	creating stack local.
	* calls.c (compute_argument_addresses): Override alignment of stack
	arg calculated from its type with the alignment given by
	FUNCTION_ARG_BOUNDARY.
	(store_one_arg): Likewise.

2005-01-11  Jan Beulich  <jbeulich@novell.com>

	* config/ia64/ia64.md (zero_extendsidi2): Replace zxt4 by addp4.
	Change respective itanium_class attribute to ialu.
	(shladdp4_internal): New.
	* config/ia64/predicates.md (shladd_log2_operand): New.

2005-01-11  Richard Henderson  <rth@redhat.com>

	* expr.c (store_constructor): Use rtvec_alloc instead of
	alloca+gen_rtvec_v, and an incorrect number passed to alloca.

2005-01-11  Kazu Hirata  <kazu@cs.umass.edu>

	* config/alpha/alpha.c, config/i386/mmx.md: Fix comment typos.

2005-01-11  Alan Modra  <amodra@bigpond.net.au>

	* varasm.c (default_section_type_flags_1): Don't set SECTION_SMALL.
	* config/ia64/ia64.c (TARGET_SECTION_TYPE_FLAGS): Define.
	(TARGET_RWRELOC): Define.
	(ia64_rwreloc_section_type_flags): Delete.
	(ia64_section_type_flags): New function.
	* config/ia64/hpux.h (TARGET_SECTION_TYPE_FLAGS): Don't define.
	(TARGET_RWRELOC): Define.

2005-01-10  David Mosberger  <davidm@hpl.hp.com>

	PR target/18987
	* config/ia64/ia64.c (process_set): For alloc insn, only call
	process_epilogue is !frame_pointer_needed.

2005-01-10  Roger Sayle  <roger@eyesopen.com>

	PR c++/19355
	* c-common.c (c_common_truthvalue_conversion): TRUTH_NOT_EXPR is a
	unary operator and can't be treated as a binary/comparison operator.

2005-01-10  Richard Henderson  <rth@redhat.com>

	* config/i386/i386.c (ix86_function_value): Use type_natural_mode.
	(ix86_return_in_memory): Likewise.
	(function_arg_advance):  Likewise.  Mirror structure in function_arg
	for choosing register to advance.

2005-01-10  Kazu Hirata  <kazu@cs.umass.edu>

	* tree-vectorizer.c, tree.def: Fix comment typos.

2005-01-10  Mark Dettinger  <dettinge@de.ibm.com>

	* config/s390/s390.c (struct processor_costs): 4 new fields:
	ddbr, ddr, debr, der.
	(s390_rtx_costs): More precise handling of divide instructions.

2005-01-10  David Edelsohn  <edelsohn@gnu.org>

	* config/rs6000/t-aix43 (BOOT_LDFLAGS): Define.

2005-01-10  Jan Beulich  <jbeulich@novell.com>

	* config/ia64/ia64.c (ia64_in_small_data_p): Also handle the section
	names resulting from -ffunction-sections/-fdata-sections and linkonce
	ones.
	* varasm.c (default_section_type_flags_1): Also set SECTION_SMALL
	based on the section name. Rearrange the section name comparison logic
	slightly so that each section name is compared against at most once.

2005-01-10  Ben Elliston  <bje@au.ibm.com>

	* doc/invoke.texi (Code Gen Options): Add PowerPC to the list of
	targets for which -fPIC reduces limitations on the GOT size.

2005-01-09  Falk Hueffner  <falk@debian.org>

	* fold-const.c (fold): Also handle EXACT_DIV_EXPR when folding
	X/C1 cmpop C2.

2005-01-09  David Edelsohn  <edelsohn@gnu.org>

	PR target/18720
	* collect2.c (main): Set aixrtl_flag for -brtl option.
	(resolve_lib_name): Search for .so file extension before .a
	if aixrtl_flag set.

2005-01-09  Dorit Naishlos  <dorit@il.ibm.com>

	* tree-vectorizer.c (vect_enhance_data_refs_alignment): Add dump prints.
	(vect_analyze_data_refs_alignment): Add dump prints.

2005-01-09  Ira Rosen  <irar@il.ibm.com>

	* tree-vectorizer.c (vect_analyze_offset_expr): Use 
	expr_invariant_in_loop_p.
	Initialize outputs first thing in the function.
	(vect_update_ivs_after_vectorizer): Call initial_condition_in_loop_num.
	(vect_is_simple_iv_evolution): Call initial_condition_in_loop_num.
	(vect_analyze_pointer_ref_access): Check that the initial condition of 
	the access function is loop invariant.

2005-01-09  Richard Henderson  <rth@redhat.com>

	* config/i386/i386.c (bdesc_2arg): Update names for mmx_ prefixes.
	(ix86_expand_builtin): Likewise.  Frob MASKMOVQ wrt the input mem
	just like MASKMOVDQU.  Return plain zero for MMX_ZERO.
	* config/i386/i386.md (MMXMODEI, mov<MMXMODEI>,
	mov<MMXMODEI>_internal_rex64, mov<MMXMODEI>_internal, movv2sf,
	movv2sf_internal_rex64, movv2sf_internal, MMXMODE,
	movmisalign<MMXMODE>, mmx_pmovmskb, mmx_maskmovq, mmx_maskmovq_rex,
	sse_movntdi, addv8qi3, addv4hi3, addv2si3, mmx_adddi3, ssaddv8qi3,
	ssaddv4hi3, usaddv8qi3, usaddv4hi3, subv8qi3, subv4hi3, subv2si3,
	mmx_subdi3, sssubv8qi3, sssubv4hi3, ussubv8qi3, ussubv4hi3,
	mulv4hi3, smulv4hi3_highpart, umulv4hi3_highpart, mmx_pmaddwd,
	sse2_umulsidi3, mmx_iordi3, mmx_xordi3, mmx_anddi3, mmx_nanddi3,
	mmx_uavgv8qi3, mmx_uavgv4hi3, mmx_psadbw, mmx_pinsrw, mmx_pinsrw,
	mmx_pextrw, mmx_pshufw, eqv8qi3, eqv4hi3, eqv2si3, gtv8qi3, gtv4hi3,
	gtv2si3, umaxv8qi3, smaxv4hi3, uminv8qi3, sminv4hi3, ashrv4hi3,
	ashrv2si3, lshrv4hi3, lshrv2si3, mmx_lshrdi3, ashlv4hi3, ashlv2si3,
	mmx_ashldi3, mmx_packsswb, mmx_packssdw, mmx_packuswb, mmx_punpckhbw,
	mmx_punpckhwd, mmx_punpckhdq, mmx_punpcklbw, mmx_punpcklwd, 
	mmx_punpckldq, emms, addv2sf3, subv2sf3, subrv2sf3, gtv2sf3, gev2sf3,
	eqv2sf3, pfmaxv2sf3, pfminv2sf3, mulv2sf3, femms, pf2id, pf2iw,
	pfacc, pfnacc, pfpnacc, pi2fw, floatv2si2, pfrcpv2sf2, pfrcpit1v2sf3,
	pfrcpit2v2sf3, pfrsqrtv2sf2, pfrsqit1v2sf3, pmulhrwv4hi3, pswapdv2si2,
	pswapdv2sf2): Move to mmx.md; rename as necessary with leading
	mmx_ prefix.
	(mmx_clrdi, pavgusb): Remove.
	(ldmxcsr, stmxcsr, sfence, sfence_insn): Move to sse.md; rename 
	with leading sse_ prefix.
	* config/i386/sse.md: Receive them.
	* config/i386/mmx.md: New file.
	(MMXMODE12, MMXMODE24, mmxvecsize): New.
	(subrv2sf3): Turn into expander for normal subtraction.
	(mmx_addv2sf3, mmx_mulv2sf3, mmx_smaxv2sf3, mmx_sminv2sf3,
	mmx_eqv2sf3, mmx_mulv4hi3, mmx_smulv4hi3_highpart,
	mmx_umulv4hi3_highpart, mmx_pmaddwd, mmx_pmulhrwv4hi3, sse2_umulsidi3,
	mmx_umaxv8qi3, mmx_smaxv4hi3, mmx_uminv8qi3, mmx_sminv4hi3): Mark
	commutative; use ix86_binary_operator_ok.
	(mmx_add<MMXMODEI>3, mmx_ssadd<MMXMODE12>3, mmx_usadd<MMXMODE12>3,
	mmx_sub<MMXMODEI>3, mmx_sssub<MMXMODE12>3, mmx_ussub<MMXMODE12>3
	mmx_ashr<MMXMODE24>3, mmx_lshr<MMXMODE23>3, mmx_ashl<MMXMODE24>3
	mmx_eq<MMXMODEI>3, mmx_gt<MMXMODEI>3, mmx_and<MMXMODEI>3, 
	mmx_nand<MMXMODEI>3, mmx_ior<MMXMODEI>3, mmx_xor<MMXMODEI>3):
	Macroize from existing patterns; use ix86_binary_operator_ok.
	(mmx_packsswb, mmx_packssdw, mmx_packuswb): Add memory alternative.
	(mmx_punpckhbw, mmx_punpcklbw, mmx_punpckhwd, mmx_punpcklwd,
	mmx_punpckhdq, mmx_punpckhdq, mmx_punpckldq): Likewise.  Model
	with vec_select+vec_concat.
	(mmx_pshufw, mmx_pshufw_1): Likewise.
	(mmx_uavgv8qi3): Merge pavgusb.  Model correcty.
	(mmx_uavgv4hi3): Model correctly.
	* config/i386/mmintrin.h (_mm_and_si64, _mm_andnot_si64, _mm_or_si64,
	_mm_xor_si64): Remove casts.

2005-01-09  Zdenek Dvorak  <dvorakz@suse.cz>

	PR tree-optimization/19224
	* tree-scalar-evolution.c (get_instantiated_value,
	set_instantiated_value): New functions.
	(instantiate_parameters_1): Cache the results.
	(instantiate_parameters, resolve_mixers): Initialize and free
	the cache.

2005-01-08  David Edelsohn  <edelsohn@gnu.org>

	* config/i386/i386.md (addhi_4): Correct reference in comment.
	(addqi_4): Same.

2005-01-08  Richard Henderson  <rth@redhat.com>

	* config/i386/emmintrin.h (_mm_cvtsi128_si32): Move earlier.
	(_mm_cvtsi128_si64x): Likewise.
	(_mm_srl_epi64, _mm_srl_epi32, _mm_srl_epi16, _mm_sra_epi32,
	_mm_sra_epi16, _mm_sll_epi64, _mm_sll_epi32, _mm_sll_epi16): Use
	the _mm_{srl,sll}i_foo counterpart, and _mm_cvtsi128_si32.
	* config/i386/i386-modes.def: Add V16HI, V32QI, V4DF, V8SF.
	* config/i386/i386-protos.h: Update.
	* config/i386/i386.c (print_operand): Add 'H'.
	(ix86_fixup_binary_operands): Split out from ...
	(ix86_expand_binary_operator): ... here.
	(ix86_fixup_binary_operands_no_copy): New.
	(ix86_expand_fp_absneg_operator): Handle vector mode results.
	(bdesc_2arg): Update names for sse{,2,3}_ prefixes.
	(ix86_init_mmx_sse_builtins): Remove *maskncmp* special cases.
	(safe_vector_operand): Use CONST0_RTX.
	(ix86_expand_binop_builtin): Use ix86_fixup_binary_operands.
	(ix86_expand_builtin): Merge CODE_FOR_sse2_maskmovdqu_rex64 and
	CODE_FOR_sse2_maskmovdqu.  Special case SSE version of MASKMOVDQU
	expansion.  Update names for sse{,2,3}_ prefixes.  Remove *maskncmp*
	special cases.
	* config/i386/i386.h (IX86_BUILTIN_CMPNGTSS): New.
	(IX86_BUILTIN_CMPNGESS): New.
	* config/i386/i386.md (UNSPEC_FIX_NOTRUNC): New.
	(attr type): Add sselog1.
	(attr unit, attr memory): Handle it.
	(movti, movti_internal, movti_rex64): Move near other integer moves.
	(movtf, movtf_internal): Move near other fp moves.
	(SSEMODE, SSEMODEI, vec_setv2df, vec_extractv2df, vec_initv2df,
	vec_setv4sf, vec_extractv4sf, vec_initv4sf, movv4sf, movv4sf_internal,
	movv2df, movv2df_internal, mov<SSEMODEI>, mov<SSEMODEI>_internal, 
	movmisalign<SSEMODE>, sse_movups_1, sse_movmskps, sse_movntv4sf,
	sse_movhlps, sse_movlhps, sse_storehps, sse_loadhps, sse_storelps,
	sse_loadlps, sse_loadss, sse_loadss_1, sse_movss, sse_storess,
	sse_shufps, addv4sf3, vmaddv4sf3, subv4sf3, vmsubv4sf3, negv4sf2,
	mulv4sf3, vmmulv4sf3, divv4sf3, vmdivv4sf3, rcpv4sf2, vmrcpv4sf2,
	rsqrtv4sf2, vmrsqrtv4sf2, sqrtv4sf2, vmsqrtv4sf2, sse_andv4sf3,
	sse_nandv4sf3, sse_iorv4sf3, sse_xorv4sf3, sse2_andv2df3, 
	sse2_nandv2df3, sse2_iorv2df3, sse2_xorv2df3, sse2_andv2di3, 
	sse2_nandv2di3, sse2_iorv2di3, sse2_xorv2di3, maskcmpv4sf3, 
	vmmaskcmpv4sf3, sse_comi, sse_ucomi, sse_unpckhps, sse_unpcklps,
	smaxv4sf3, vmsmaxv4sf3, sminv4sf3, vmsminv4sf3, cvtpi2ps, cvtps2pi,
	cvttps2pi, cvtsi2ss, cvtsi2ssq, cvtss2si, cvtss2siq, cvttss2si,
	cvttss2siq, addv2df3, vmaddv2df3, subv2df3, vmsubv2df3, mulv2df3,
	vmmulv2df3, divv2df3, vmdivv2df3, smaxv2df3, vmsmaxv2df3, sminv2df3,
	vmsminv2df3, sqrtv2df2, vmsqrtv2df2, maskcmpv2df3, vmmaskcmpv2df3,
	sse2_comi, sse2_ucomi, sse2_movmskpd, sse2_pmovmskb, sse2_maskmovdqu,
	sse2_maskmovdqu_rex64, sse2_movntv2df, sse2_movntv2di, sse2_movntsi,
	cvtdq2ps, cvtps2dq, cvttps2dq, cvtdq2pd, cvtpd2dq, cvttpd2dq,
	cvtpd2pi, cvttpd2pi, cvtpi2pd, cvtsd2si, cvtsd2siq, cvttsd2si,
	cvttsd2siq, cvtsi2sd, cvtsi2sdq, cvtsd2ss, cvtss2sd, cvtpd2ps,
	cvtps2pd, addv16qi3, addv8hi3, addv4si3, addv2di3, ssaddv16qi3,
	ssaddv8hi3, usaddv16qi3, usaddv8hi3, subv16qi3, subv8hi3, subv4si3,
	subv2di3, sssubv16qi3, sssubv8hi3, ussubv16qi3, ussubv8hi3, mulv8hi3,
	smulv8hi3_highpart, umulv8hi3_highpart, sse2_umulsidi3,
	sse2_umulv2siv2di3, sse2_pmaddwd, sse2_uavgv16qi3, sse2_uavgv8hi3,
	sse2_psadbw, sse2_pinsrw, sse2_pextrw, sse2_pshufd, sse2_pshuflw,
	sse2_pshufhw, eqv16qi3, eqv8hi3, eqv4si3, gtv16qi3, gtv8hi3, 
	gtv4si3, umaxv16qi3, smaxv8hi3, uminv16qi3, sminv8hi3, ashrv8hi3,
	ashrv4si3, lshrv8hi3, lshrv4si3, lshrv2di3, ashlv8hi3, ashlv4si3,
	ashlv2di3, sse2_ashlti3, sse2_lshrti3, sse2_unpckhpd, sse2_unpcklpd,
	sse2_packsswb, sse2_packssdw, sse2_packuswb, sse2_punpckhbw, 
	sse2_punpckhwd, sse2_punpckhdq, sse2_punpcklbw, sse2_punpcklwd,
	sse2_punpckldq, sse2_punpcklqdq, sse2_punpckhqdq, sse2_movupd,
	sse2_movdqu, sse2_movdq2q, sse2_movdq2q_rex64, sse2_movq2dq, 
	sse2_movq2dq_rex64, sse2_loadd, sse2_stored, sse2_storehpd,
	sse2_loadhpd, sse2_storelpd, sse2_loadlpd, sse2_movsd, sse2_loadsd,
	sse2_loadsd_1, sse2_storesd, sse2_shufpd, sse2_clflush, sse2_mfence,
	mfence_insn, sse2_lfence, lfence_insn, mwait, monitor, addsubv4sf3,
	addsubv2df3, haddv4sf3, haddv2df3, hsubv4sf3, hsubv2df3, movshdup,
	movsldup, lddqu, loadddup, movddup): Move to sse.md.  Any with
	non-optabs meanings renamed with an "sse{,2,3}_" prefix at the
	same time.
	(SSEPUSH, push<SSEPUSH>): Remove.
	(MMXPUSH, push<MMXPUSH>): Remove.
	(sse_movaps, sse_movaps_1, sse_movups): Remove.
	(sse2_movapd, sse2_movdqa, sse2_movq): Remove.
	(sse2_andti3, sse2_nandti3, sse2_iorti3, sse2_xorti3): Remove.
	(sse_clrv4sf, sse_clrv2df, sse2_clrti): Remove.
	(maskncmpv4sf3, vmmaskncmpv4sf3): Remove.
	(maskncmpv2df3, vmmaskncmpv2df3): Remove.
	(ashrv8hi3_ti, ashrv4si3_ti, lshrv8hi3_ti, lshrv4si3_ti): Remove.
	(lshrv2di3_ti, ashlv8hi3_ti, ashlv4si3_ti, ashlv2di3_ti): Remove.
	* config/i386/athlon.md (athlon_sselog_load): Handle sselog1.
	(athlon_sselog_load_k8, athlon_sselog, athlon_sselog_k8): Likewise.
	* config/i386/ppro.md (ppro_sse_div_V4SF_load): Fix memory attr.
	(ppro_sse_log_V4SF_load): Similarly.  Handle sselog1.
	(ppro_sse_log_V4SF): Handle sselog1.
	* config/i386/predicates.md (const_0_to_1_operand): New.
	(const_0_to_255_mul_8_operand): New.
	(const_1_to_31_operand): Rename from const_int_1_31_operand.
	(const_2_to_3_operand, const_4_to_7_operand): New.
	* config/i386/sse.md: New file.
	(SSEMODE12, SSEMODE24, SSEMODE124, SSEMODE248, ssevecsize): New.
	(sse_movups): Rename from sse_movups_1.
	(sse_loadlss): Rename from sse_loadss_1.
	(andv4sf3, iorv4sf3, xorv4sf3, andv2df3): Remove the sse prefix
	from the name.
	(negv4sf2): Use ix86_expand_fp_absneg_operator.
	(absv4sf2, negv2df, absv2df): New.
	(addv4sf3): Add expander to call ix86_fixup_binary_operands_no_copy.
	(subv4sf3, mulv4sf3, divv4sf3, smaxv4sf3, sminv4sf3, andv4sf3,
	iorv4sf3, xorv4sf3, addv2df3, subv2df3, mulv2df3, divv2df3,
	smaxv2df3, sminv2df3, andv2df3, iorv2df3, xorv2df3, mulv8hi3,
	umaxv16qi3, smaxv8hi3, uminv16qi3, sminv8hi3): Likewise.
	(sse3_addsubv4sf3): Model correctly.
	sse3_haddv4sf3, sse3_hsubv4sf3, sse3_addsubv2df3, sse3_haddv2df3,
	sse3_hsubv2df3, sse2_ashlti3, sse2_lshrti3): Likewise.
	(sse_movhlps): Model with vec_select+vec_concat.
	(sse_movlhps, sse_unpckhps, sse_unpcklps, sse3_movshdup, 
	sse3_movsldup, sse_shufps, sse_shufps_1, sse2_unpckhpd, sse3_movddup,
	sse2_unpcklpd, sse2_shufpd, sse2_shufpd_1, sse2_punpckhbw,
	sse2_punpcklbw, sse2_punpckhwd, sse2_punpcklwd, sse2_punpckhdq,
	sse2_punpckldq, sse2_punpckhqdq, sse2_punpcklqdq, sse2_pshufd,
	sse2_pshufd_1, sse2_pshuflw, sse2_pshuflw_1, sse2_pshufhw, 
	sse2_pshufhw_1): Likewise.
	(neg<SSEMODEI>2, one_cmpl<SSEMODEI>2): New.
	(add<SSEMODEI>3, sse2_ssadd<SSEMODE12>3, sse2_usadd<SSEMODE12>3,
	sub<SSEMODEI>3, sse2_sssub<SSEMODE12>3, sse2_ussub<SSEMODE12>3,
	ashr<SSEMODE24>3, lshr<SSEMODE248>3, sse2_eq<SSEMODE124>3,
	sse2_gt<SSEMODDE124>3, and<SSEMODEI>3, sse_nand<SSEMODEI>3,
	ior<SSEMODEI>3, xor<SSEMODEI>3): Macroize from existing patterns.	
	(addv4sf3, sse_vmaddv4sf3, mulv4sf3, sse_vmmulv4sf3, smaxv4sf3,
	sse_vmsmaxv4sf3, sminv4sf3, sse_vmsminv4sf3, addv2df3, sse2_vmaddv2df3,
	mulv2df3, sse2_vmmulv2df3, smaxv2df3, sse2_vmsmaxv2df3, sminv2df3,
	sse2_vmsminv2df3, umaxv16qi3, smaxv8hi3, uminv16qi3
	sminv8hi3): Mark commutative
	operands.  Use ix86_binary_operator_ok.
	(sse_unpckhps, sse_unpcklps, sse2_packsswb, sse2_packssdw,
	sse2_packuswb, sse2_punpckhbw, sse2_punpcklbw, sse2_punpckhwd,
	sse2_punpcklwd, sse2_punpckhdq, sse2_punpckldq, sse2_punpckhqdq,
	sse2_punpcklqdq): Allow operand2 in memory.
	(sse_movhlps, sse_movlhps, sse2_unpckhpd, sse2_unpcklpd
	sse2_movsd): Add memory alternatives.
	(sse_storelps): Turn expander into an insn; split after reload.
	(sse_storess, sse2_loadhpd, sse2_loadlpd): Add non-xmm inputs.
	(sse2_storehpd, sse2_storelpd): Add non-xmm outputs.

2005-01-08  Eric Botcazou  <ebotcazou@libertysurf.fr>

	* configure.ac (DWARF-2 debug_line): Use objdump.
	* configure: Regenerate.

2005-01-08  Jeff Law  <law@redhat.com>
	    Diego Novillo  <dnovillo@redhat.com>

	PR tree-optimization/18241
	* tree-nrv.c (tree_nrv): Ignore volatile return values.
	* tree-ssa-dse.c (dse_optimize_stmt): Do not optimize
	statements with volatile operands.
	* tree-ssa-operands.c (add_stmt_operand): Do add volatile
	operands after marking a statement with has_volatile_ops.

2005-01-08  Roger Sayle  <roger@eyesopen.com>

	* tree.c (int_fits_type_p): Always honor integer constant
	TYPE_MIN_VALUE and TYPE_MAX_VALUE if they exist.

2005-01-08  Roger Sayle  <roger@eyesopen.com>

	* ifcvt.c (find_if_case_1): Reinstate 2005-01-04 change, now that
	the latent bug in rtl_delete_block has been resolved.

2005-01-08  Richard Sandiford  <rsandifo@redhat.com>

	* config/mips/t-iris6 (MULTILIB_DIRNAMES): Use -mabi argument values.
	(MULTILIB_OSDIRNAMES): Use the standard lib, lib32 and lib64.

2005-01-08  Richard Sandiford  <rsandifo@redhat.com>

	* config/mips/t-slibgcc-irix (SHLIB_LINK): Install a copy of the
	library as @multilib_dir@/$(SHLIB_SONAME).

2005-01-07  Eric Botcazou  <ebotcazou@libertysurf.fr>

	* configure.ac (HAVE_AS_OFFSETABLE_LO10): Fix typo.
	* configure: Regenerate.

2005-01-07  Jakub Jelinek  <jakub@redhat.com>

	* c-common.c (handle_mode_attribute): For ENUMERAL_TYPE, also copy
	TYPE_MODE.

2005-01-07  David Edelsohn  <edelsohn@gnu.org>

	PR target/13674
	* config/rs6000/rs6000.c (rs6000_legitimize_reload_address):
	Convert non-word aligned offset address using ld/std into
	indirect address.

2005-01-07  Richard Henderson  <rth@redhat.com>

	* config/i386/i386.md (sse_loadhps splitter): Fix operand number typo.

2005-01-07  Richard SAndiford  <rsandifo@redhat.com>

	* tree.h (IS_EXPR_CODE_CLASS): Use a straight-forward range check.

2005-01-07  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/19283
	* fold-const.c (fold_widened_comparison): Return NULL if shorter_type
	is not shorter than the original type.

	PR rtl-optimization/19012
	* config/i386/i386.md (addqi_1_slp): Set memory attribute.

	PR rtl-optimization/18861
	* cfgbuild.c (BLOCK_USED_BY_TABLEJUMP): Define.
	(FULL_STATE): Define.
	(mark_tablejump_edge): New function.
	(purge_dead_tablejump_edges): New function.
	(find_bb_boundaries): Use it.

	PR tree-optimization/18828
	* builtins.c (expand_builtin_next_arg): Remove argument and all
	the argument checking.
	(expand_builtin): Adjust caller.
	(expand_builtin_va_start): Likewise.  Remove error for too many
	arguments.
	(fold_builtin_next_arg): Issue error for too many arguments.
	After checking arguments, replace them with magic arguments that
	prevent further checking of the args.

2005-01-06  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

	* pa64-hpux.h (STARTFILE_SPEC): Fix typo in spec.

2005-01-06  Roger Sayle  <roger@eyesopen.com>

	PR target/6077
	* gcc.c (input_suffix_matches): Tweak the semantics of %{.s:...}
	and %{.S:...} (and their negative variants) to test whether the
	input file is assembler or pre-processed-assembler independent of
	the actual filename extension.

2005-01-06  Roger Sayle  <roger@eyesopen.com>

	* simplify-rtx.c (simplify_subreg): Simplify truncations of shifts
	of sign or zero extended values.

2005-01-06  Geoffrey Keating  <geoffk@apple.com>

	* c-cppbuiltin.c (builtin_define_float_constants): Set __*_EPSILON__
	for IBM long double format correctly.

2005-01-06  Daniel Berlin <dberlin@dberlin.org>
	
	Fix PR tree-optimization/18792

	* tree-data-ref.c (build_classic_dist_vector): Change first_loop
	to first_loop_depth, and use loop depth instead of loop number.
	(build_classic_dir_vector): Ditto.
	(compute_data_dependences_for_loop): Use depth, not loop number.
	* tree-loop-linear.c (try_interchange_loops): Use loop depth, not loop 
	number. Pass in loops, instead of loop numbers.
	(gather_interchange_stats): Ditto.
	(linear_transform_loops): Ditto.

2005-01-06  Richard Sandiford  <rsandifo@redhat.com>

	PR rtl-opt/13299
	* loop.c (get_monotonic_increment, biased_biv_fits_mode_p,
	biv_fits_mode_p, extension_within_bounds_p): New functions.
	(check_ext_dependent_givs): Use them.

2005-01-06  Roger Sayle  <roger@eyesopen.com>

	* cfgrtl.c (rtl_delete_block): A basic block may be followed by
	more than one barrier, in which case we should delete them all.

2005-01-06  Tobias Schlueter  <tobias.schlueter@physik.uni-muenchen.de>

	* gcc.c (process_command): Change year in 'gcc --version' to 2005.

2005-01-05  Daniel Berlin  <dberlin@dberlin.org>
	
	Fix PR middle-end/19286
	Fix PR debug/19267
	* dwarf2out.c (gen_subprogram_die): If we've already tried to
	output this subprogram, simply ignore this attempt to do it again.
	(add_abstract_origin_attribute): Don't abort trying to add the abstract
	origin attribute if it's not possible.
	(gen_block_die): Don't ignore subblocks of "unused" blocks.
	(decls_for_scope): Ditto.
	* gimple-low.c (mark_blocks_with_used_subblocks): Remove.
	(mark_used_blocks): Don't call mark_blocks_with_used_subblocks.
	
2005-01-05  Richard Henderson  <rth@redhat.com>

	PR target/11327
	* config/i386/i386.c (BUILTIN_DESC_SWAP_OPERANDS): New.
	(bdesc_2arg): Use it.
	(ix86_expand_binop_builtin): Force operands into registers
	when optimizing.
	(ix86_expand_unop_builtin, ix86_expand_unop1_builtin,
	ix86_expand_sse_compare, ix86_expand_sse_comi, 
	ix86_expand_builtin): Likewise.

2005-01-05  Richard Henderson  <rth@redhat.com>

	* config/ia64/ia64.c (rtx_needs_barrier): Handle CONST_VECTOR
	and VEC_SELECT.
	* config/ia64/vect.md (mulv8qi3): Re-implement with mix_[rl].
	(mulv4hi3): Set itanium_class mmmul.
	(fpack_sfxf, fpack_xfsf, fpack_xfxf): Remove.
	(fpack): Rename from fpack_sfsf.

2005-01-05  Richard Henderson  <rth@redhat.com>

	PR rtl-opt/10692
	* reload1.c (do_input_reload): Restrict the optimization deleteing
	a previous output reload to RELOAD_FOR_INPUT.

2005-01-05  Steven Bosscher  <stevenb@suse.de>

	* combine.c (expand_compound_operation)  <ZERO_EXTRACT>: Add
	comment that we fall through after case.
	(mark_used_regs_combine): Don't expect a SIGN_EXTRACT in a SET_DEST.
	(distribute_links): Likewise.
	* cse.c (cse_insn): Likewise.
	* cselib.c (cselib_invalidate_mem): Likewise.
	* df.c: Update comments at the top of the file.
	(read_modify_subreg_p): Update comments here too.
	(df_def_record_1): Don't expect a SIGN_EXTRACT in a SET_DEST.
	* flow.c (mark_set_1): Likewise.
	(mark_used_regs): Likewise.
	* gcse.c (mems_conflict_for_gcse_p): Likewise.
	(canon_list_insert): Likewise.
	(mark_set): Likewise.
	(try_replace_reg): Likewise.
	(store_killed_in_insn): Likewise.
	* loop.c (count_one_set): Likewise.
	(basic_induction_var): Likewise.
	* postreload-gcse.c (find_mem_conflicts): Likewise.
	* postreload.c (reload_combine_note_store): Likewise.
	(move2add_note_store): Likewise.
	* reload.c (find_equiv_reg): Likewise.
	(mark_referenced_resources): Likewise.
	* rtlanal.c (set_noop_p): Likewise.
	(note_stores): Likewise.
	(note_uses): Likewise.
	* sched-deps.c (sched_analyze_1): Likewise.
	* sched-rgn.c (check_live_1): Likewise.
	(update_live_1): Likewise.
	* config/i860/i860.c: Likewise.

	* rtl.dec (SIGN_EXTRACT): Document that this cannot appear as
	an lvalue.
	(ZERO_EXTRACT): Mention that this one can be an lvalue.

	* doc/rtl.texi: Update documentation for bit-fields and SET.

2005-01-05  Roger Sayle  <roger@eyesopen.com>

	* ifcvt.c (find_if_case_1): Revert 2005-01-04 change.

2005-01-05  Jan Hubicka  <jh@suse.cz>
	    Richard Henderson  <rth@redhat.com>

	PR target/18910
	* config/i386/i386.c (ix86_expand_move): Handle tls symbols 
	with an offset.

2005-01-05  Richard Henderson  <rth@redhat.com>

	PR target/12902
	* config/i386/i386.md (sse_movhps, sse_movlps): Remove.
	(sse_shufps): Change operand 3 to const_int_operand.
	(sse2_storelps): Fix typo in template.
	(sse_storehps, sse_loadhps, sse_storelps, sse_loadlps): New.
	* config/i386/i386.c (ix86_expand_vector_move_misalign): Use them.
	(ix86_expand_builtin): Likewise.

2005-01-05  Julian Brown  <julian@codesourcery.com>

	* config/arm/arm.c (arm_return_in_memory): Treat complex types
	as aggregates for AAPCS ABIs.

2005-01-05  Stan Shebs  <shebs@apple.com>

	* unwind-dw2-fde-darwin.c (examine_objects): Use 64-bit
	Mach-O getters if ppc64.
	* config/darwin.c (darwin_asm_output_dwarf_delta): Obey
	size argument.
	* config/darwin.h (ASM_PREFERRED_EH_DATA_FORMAT): Use
	signed four-byte field for global code case.
	(STARTFILE_SPEC): Avoid crt2.o for 64-bit compilation.

2005-01-05  Roger Sayle  <roger@eyesopen.com>

	PR middle-end/19100
	* c-common.c: Include real.h.
	(c_common_truthvalue_conversion): Avoid destructively modifying expr.
	Correctly handle TREE_CONSTANT_OVERFLOW for INTEGER_CST.
	Correctly handle TREE_CONSTANT_OVERFLOW and NaNs for REAL_CST.
	* Makefile.in (c-common.o): Update dependencies.

2005-01-05  Joseph S. Myers  <joseph@codesourcery.com>

	* c-parse.in (asm_string): Add trailing semicolon.

2005-01-05  Joseph S. Myers  <joseph@codesourcery.com>

	* c-parse.in (asm_string): New.  Don't allow wide strings in
	'asm'.
	(simple_asm_expr, asm_argument, asm_operand, asm_clobbers): Use
	asm_string instead of STRING.

2005-01-05  Joseph S. Myers  <joseph@codesourcery.com>

	* c-typeck.c (constructor_no_implicit): Remove.
	(set_designator, process_init_element): Don't check
	constructor_no_implicit.

2005-01-05  J"orn Rennecke <joern.rennecke@st.com>
	    Kaz Kojima  <kkojima@gcc.gnu.org>

	PR target/16482
	* lcm.c (create_pre_exit): New.
	(optimize_mode_switching): In MODE_ENTRY / MODE_EXIT case, set
	ENTRY_EXIT_EXTRA to 3.  Use create_pre_exit.

2004-01-05  Richard Earnshaw  <rearnsha@arm.com>

	* arm.h (TARGET_OPTIONS): Correctly record -mhard-float and
	-msoft-float in target_float_switch.
	* arm.c (arm_override_options): Fix processing of target_float_switch.

2004-01-05  Richard Earnshaw  <rearnsha@arm.com>

	* arm/vfp.md (arm_movsi_vfp): Hide VFP register classes from register
	preferencing.

2004-01-05  Uros Bizjak  <uros@kss-loka.si>

	* doc/invoke.texi (Intel 386 and AMD x86-64 Options):
        Replace i387 with 'i386 compiler' in -mfpmath=sse option.

2005-01-04  Roger Sayle  <roger@eyesopen.com>

	* ifcvt.c (find_if_case_1): Avoid creating an empty forwarder block,
	if deleting the then-block allows the test-block to fallthru to the
	else-block.

2005-01-04  Andrew Pinski  <pinskia@physics.uc.edu>

	PR c/19152
	* c-decl.c (diagnose_mismatched_decls): Accept "extern inline" declared
	after the full declaration if the are in two different TUs.

2005-01-04  Richard Henderson  <rth@redhat.com>

	PR tree-opt/19158
	* tree-sra.c (generate_one_element_init): Just
	call gimplify_and_add.
	(generate_element_init): Record the
	new referenced variables and mark them for renaming
	and split out to ...
	(generate_element_init_1): This.
	(scalarize_init): Don't call push_gimplify_context/
	pop_gimplify_context.

2005-01-04  Geoffrey Keating  <geoffk@apple.com>

	* toplev.c (get_src_pwd): Handle failure of getpwd().

2005-01-04  Roger Sayle  <roger@eyesopen.com>

	* fold-const.c (fold_single_bit_test): Delete unreachable handling
	of TRUTH_NOT_EXPR.
	(fold): Don't call fold_single_bit_test with a TRUTH_NOT_EXPR, as
	all the cases handled by it are inverted by invert_truthvalue.

2005-01-04  Eric Botcazou  <ebotcazou@libertysurf.fr>

	* config/sparc/sparc.md (save_register_windowdi): Add missing mode.
	(save_register_windowsi): Likewise.

2005-01-04  Richard Henderson  <rth@redhat.com>

	* tree-mudflap.c (mf_varname_tree): Fix thinko setting declname.

2005-01-04  Uros Bizjak  <uros@kss-loka.si>

	PR middle-end/17767
	* cse.c (fold_rtx) [RTX_COMPARE, RTX_COMM_COMPARE]: Don't attempt
	any simplifications of vector mode comparison operators.
	* simplify-rtx.c (simplify_relational_operation): Fix variable name.

2005-01-04  Paolo Bonzini  <bonzini@gnu.org>
	    Devang Patel  <dpatel@apple.com>

	PR tree-optimization/18308
	* tree-if-conv.c (add_to_dst_predicate_list): Gimplify
	the operands before creating a new expression.
	* dojump.c (do_jump): Make drop_through_label available
	for all cases.  Add expansion of COND_EXPR.

2005-01-04  Ira Rosen  <irar@il.ibm.com>

	* tree-vectorizer.c (vect_analyze_offset_expr): Test for
	INTEGER_CST instead of TREE_CONSTANT.
	(vect_gen_niters_for_prolog_loop): Test for INTEGER_CST
	instead of TREE_CONSTANT.
	(vect_analyze_pointer_ref_access): Test for INTEGER_CST
	instead of TREE_CONSTANT.

2005-01-04  Eric Botcazou  <ebotcazou@libertysurf.fr>

	* tree-eh.c (replace_goto_queue): Return early if the queue is empty.

2005-01-04  Uros Bizjak  <uros@kss-loka.si>

	PR target/19240
	* config/i386/i386.md (*fop_df_1_i387): Disable for TARGET_SSE_MATH.
	(*fop_df_1_i387): Disable for (TARGET_SSE2 && TARGET_SSE_MATH).

2005-01-03  Richard Henderson  <rth@redhat.com>

	* fold-const.c (force_fit_type): Cope with types larger than 2 HWI.
	(fold_convert_const_int_from_int, fold_convert_const_int_from_real,
	fold_convert_const_real_from_real): Split out from ...
	(fold_convert_const): ... here.

2005-01-03  Richard Henderson  <rth@redhat.com>

	PR target/19235
	* config/i386/i386.md (movdi_2): Separate SSE1 and SSE2 alternatives.
	(mov<MMXMODEI>_internal): Likewise.
	(movdf_nointeger): Prefer Y while not preferring, but allowing, x.
	Add V2SF case; use it for SSE1; don't use TI.
	(movdf_integer): Likewise.
	(mov<SSEMODEI>_internal, movti_internal): Force V4SF for SSE1.

2005-01-03  Ira Rosen  <irar@il.ibm.com>

	* tree-vectorizer.c (vect_strip_conversions): New function.
	(vect_analyze_offset_expr): Call vect_strip_conversions. Add
	check for binary class.	

2005-01-03  Daniel Berlin  <dberlin@dberlin.org>

	Fix PR debug/17924
	Fix PR debug/19191
	* dwarf2out.c (block_ultimate_origin): Follow decl origin if origin
	is a decl.
	* gimple-low.c (mark_blocks_with_used_vars): New function.
	(mark_blocks_with_used_subblocks): Ditto.
	(mark_used_blocks): Ditto.
	(pass_mark_used_blocks): New pass.
	* tree-inline.c: Include debug.h.
	(expand_call_inline): Call outlining_inline_function here.
	* tree-optimize.c (init_tree_optimization_passes): Add
	pass_mark_used_blocks. 
	* tree-pass.h (pass_mark_used_blocks): New.
	* Makefile.in (tree-inline.o): Add debug.h dependency.

2005-01-03  Geoffrey Keating  <geoffk@apple.com>

	* config/darwin.c (darwin_handle_weak_import_attribute): Permit
	VAR_DECLs to have weak_import attribute.

	* config/rs6000/darwin-fallback.c: Use 'ucontext_t' rather than
	'struct ucontext'.

2004-01-03  Steven Bosscher  <stevenb@suse.de>

	* passes.c (rest_of_compilation): Don't run regmove if only
	flag_expensive_optimizations, require flag_regmove instead.

2005-01-03  Eric Botcazou  <ebotcazou@libertysurf.fr>

	* config/sparc/litecoff.h (TARGET_OS_CPP_BUILTINS): Do not
	register "sparc".
	* config/sparc/sysv4-only.h (TARGET_OS_CPP_BUILTINS): Likewise.
	* config/sparc/rtemself.h (TARGET_SUB_OS_CPP_BUILTINS): Likewise.
	* config/sparc/sol2-64.h (TARGET_SUB_OS_CPP_BUILTINS): Delete.
	* config/sparc/sp64-elf.h (TARGET_SUB_OS_CPP_BUILTINS): Likewise.

2005-01-03  Richard Henderson  <rth@redhat.com>

	* config/ia64/ia64.c (TARGET_VECTOR_MODE_SUPPORTED_P): New.
	(ia64_const_ok_for_letter_p): New.
	(ia64_const_double_ok_for_letter_p): New.
	(ia64_extra_constraint): New.
	(ia64_expand_vecint_compare): New.
	(ia64_expand_vcondu_v2si): New.
	(ia64_expand_vecint_cmov): New.
	(ia64_expand_vecint_minmax): New.
	(ia64_print_operand): Add 'v'.
	(ia64_preferred_reload_class): New.
	(ia64_vector_mode_supported_p): New.
	* config/ia64/ia64.h (UNITS_PER_SIMD_WORD): New.
	(PREFERRED_RELOAD_CLASS): Move to function.
	(CONST_OK_FOR_LETTER_P): Move to function.
	(CONST_DOUBLE_OK_FOR_LETTER_P): Move to function.
	(CONSTRAINT_OK_FOR_Q, CONSTRAINT_OK_FOR_R): Remove.
	(CONSTRAINT_OK_FOR_S, CONSTRAINT_OK_FOR_T): Remove.
	(EXTRA_CONSTRAINT): Move to function.
	* config/ia64/ia64.md: Include vect.md.
	(itanium_class): Add mmalua.
	(type): Handle it.
	* config/ia64/itanium1.md (1_mmalua): New.  Add it to bypasses.
	(1b_mmalua): New.
	* config/ia64/itanium2.md (2_mmalua, 2b_mmalua): Similarly.
	* config/ia64/predicates.md (gr_reg_or_0_operand): Accept any
	CONST0_RTX.
	(const_int_2bit_operand): New.
	(fr_reg_or_0_operand): New.
	* config/ia64/ia64-modes.def: Add vector modes.
	* config/ia64/ia64-protos.h: Update.
	* config/ia64/vect.md: New file.

2005-01-03  Richard Henderson  <rth@redhat.com>

	* simplify-rtx.c (simplify_binary_operation): Handle VEC_CONCAT.

2005-01-03  Uros Bizjak  <uros@kss-loka.si>

	PR target/19236
	* config/i386/i386.c (log1psf2): Change mode of operands[0,1]
	to SFmode.
	(log1pdf2): Change mode of operands[0,1] to DFmode.

2005-01-03  Eric Botcazou  <ebotcazou@libertysurf.fr>

	* config/sparc/sparc.h (SPARC_RELAXED_ORDERING): Define to false.
	* config/sparc/linux.h (SPARC_RELAXED_ORDERING): Define to true.
	* config/sparc/linux64.h (SPARC_RELAXED_ORDERING): Likewise.
	* config/sparc/sparc.c (TARGET_RELAXED_ORDERING): Define to
	SPARC_RELAXED_ORDERING.

2005-01-03  Richard Henderson  <rth@redhat.com>
	    Uros Bizjak  <uros@kss-loka.si>

	PR target/14631
	* config/i386/i386.c (ix86_expand_builtin): [IX86_BUILTIN_PINSRW,
	IX86_BUILTIN_PINSRW128]: Fix wrong selector range in error message.
	* config/i386/i386.md (mmx_pinsrw, sse2_pinsrw): Fix selector
	handling.
	(*mmx_pinsrw, *sse2_pinsrw): New patterns.
	* config/i386/i386/predicates.md (const_pow2_1_to_8_operand,
	const_pow2_1_to_128_operand): New predicates.

2005-01-02  Greg McGary  <greg@mcgary.org>

	* tree-mudflap.c (mf_varname_tree): decl_printable_name handles
	anonymous decls.
	(mf_xform_derefs_1) [RESULT_DECL, STRING_CST]: Handle as innermost
	object.  [ptr_type]: Remove unused variable.
	Remember nearest addressable array-element or record-component
	when checking bitfield components.  Tolerate empty BIND_EXPR.

2005-01-01  Richard Henderson  <rth@redhat.com>

	* tree-vectorizer.c (vect_analyze_offset_expr): Strip conversions
	that don't narrow the value.  Fail for other conversions.

2005-01-01  Richard Henderson  <rth@redhat.com>

	PR c/19031
	* c-decl.c (pop_file_scope): Call maybe_apply_pending_pragma_weaks.
	* c-lang.c (finish_file): Don't do it here.
	* objc/objc-act.c (objc_finish_file): Likewise.

	* cgraph.c (decl_assembler_name_equal): New.
	(cgraph_node_for_asm, cgraph_varpool_node_for_asm): New.
	(cgraph_varpool_node): Actually link up cgraph_varpool_nodes.
	* cgraph.h (struct cgraph_varpool_node): Add next.
	(cgraph_node_for_asm, cgraph_varpool_node_for_asm): Declare.
	* varasm.c (assemble_alias): Mark the target as needed.

2005-01-01  Andrew Pinski  <pinskia@physics.uc.edu>

	PR middle-end/19221
	* function.c (get_arg_pointer_save_area): Use entry_of_function
	instead of get_insns.

2005-01-01  Roger Sayle  <roger@eyesopen.com>
	    Andrew Pinski  <pinskia@physics.uc.edu>
	    James E. Wilson  <wilson@specifixinc.com>

	PR rtl-optimization/12092
	* loop.c (emit_prefetch_instructions): Do nothing if PREFETCH_BLOCK
	is zero.

2005-01-01  Roger Sayle  <roger@eyesopen.com>
	    Olivier Hainque  <hainque@act-europe.fr>

	* tree.c (int_fits_type_p): A narrower type always fits in a
	wider one, except for negative values into unsigned types.

2005-01-01  Roger Sayle  <roger@eyesopen.com>

	* tree.c (int_fits_type_p): Compare the result of force_fit_type
	with the original constant rather than require TREE_OVERFLOW.

2005-01-01  Steven Bosscher  <stevenb@suse.de>

	PR middle-end/17544
	* c-decl.c (finish_function): If compiling C99, annotate the
	compiler generated return with the current file name and line 0.
	* tree-cfg.c (remove_useless_stmts_warn_notreached): Only warn if
	the source line is greater than 0.
	(remove_bb): Likewise.

See ChangeLog.12 for earlier changes.