path: root/gcc/ChangeLog

2019-08-13  Richard Sandiford  <richard.sandiford@arm.com>

	PR middle-end/91421
	* attribs.c (decl_attributes): Check the DECL_BUILT_IN_CLASS
	before the DECL_FUNCTION_CODE.
	* calls.c (maybe_warn_alloc_args_overflow): Use fndecl_built_in_p
	to check for a BUILT_IN_ALLOCA call.
	* ipa-cp.c (ipa_get_indirect_edge_target_1): Likewise for
	BUILT_IN_UNREACHABLE.  Don't check for a FUNCTION_TYPE.
	* ipa-devirt.c (possible_polymorphic_call_target_p): Likewise.
	* ipa-prop.c (try_make_edge_direct_virtual_call): Likewise.
	* gimple-ssa-isolate-paths.c (is_addr_local): Check specifically
	for BUILT_IN_NORMAL functions.
	* trans-mem.c (expand_block_edges): Use gimple_call_builtin_p to
	test for BUILT_IN_TM_ABORT.
	* tree-ssa-ccp.c (optimize_stack_restore): Use fndecl_built_in_p
	to check for a BUILT_IN_STACK_RESTORE call.
	(optimize_stdarg_builtin): Remove redundant check for GIMPLE_CALL.
	* tree-ssa-threadedge.c
	(record_temporary_equivalences_from_stmts_at_dest): Check for a
	BUILT_IN_NORMAL decl before checking its DECL_FUNCTION_CODE.
	* tree-vect-patterns.c (vect_recog_pow_pattern): Use a positive
	test for a BUILT_IN_NORMAL call instead of a negative test for
	an internal function call.

2019-08-13  Richard Sandiford  <richard.sandiford@arm.com>

	* tree.h (build_vector_a_then_b): Declare.
	* tree.c (build_vector_a_then_b): New function.
	* fold-const-call.c (fold_while_ult): Likewise.
	(fold_const_call): Use it to handle IFN_WHILE_ULT.
	* config/aarch64/aarch64-protos.h (AARCH64_FOR_SVPATTERN): New macro.
	(aarch64_svpattern): New enum.
	* config/aarch64/aarch64-sve.md (mov<PRED_ALL:mode>): Pass
	constants through aarch64_expand_mov_immediate.
	(*aarch64_sve_mov<PRED_ALL:mode>): Use aarch64_mov_operand rather
	than general_operand as the predicate for operand 1.
	(while_ult<GPI:mode><PRED_ALL:mode>): Add a '@' marker.
	* config/aarch64/aarch64.c (simd_immediate_info::PTRUE): New
	insn_type.
	(simd_immediate_info::simd_immediate_info): New overload that
	takes a scalar_int_mode and an svpattern.
	(simd_immediate_info::u): Add a "pattern" field.
	(svpattern_token): New function.
	(aarch64_get_sve_pred_bits, aarch64_widest_sve_pred_elt_size)
	(aarch64_partial_ptrue_length, aarch64_svpattern_for_vl)
	(aarch64_sve_move_pred_via_while): New functions.
	(aarch64_expand_mov_immediate): Try using
	aarch64_sve_move_pred_via_while for predicates that contain N ones
	followed by M zeros but that do not correspond to a VLnnn pattern.
	(aarch64_sve_pred_valid_immediate): New function.
	(aarch64_simd_valid_immediate): Use it instead of dealing directly
	with PTRUE and PFALSE.
	(aarch64_output_sve_mov_immediate): Handle new simd_immediate_info
	forms.

2019-08-13 Iain Sandoe <iain@sandoe.co.uk>

	* config/darwin.c (machopic_indirect_call_target): Rename symbol stub
	flag.
	(darwin_override_options): Likewise.
	* config/darwin.h: Likewise.
	* config/darwin.opt: Likewise.
	* config/i386/i386.c (output_pic_addr_const): Likewise.
	* config/rs6000/darwin.h: Likewise.
	* config/rs6000/rs6000.c (rs6000_call_darwin_1): Likewise.
	* config/i386/darwin.h (TARGET_MACHO_PICSYM_STUBS): Rename to ...
	... this TARGET_MACHO_SYMBOL_STUBS.
	(FUNCTION_PROFILER):Likewise.
	* config/i386/i386.h: Likewise.

2019-08-13  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (ix86_expand_vector_extract) <case E_V2SImode>:
	Use vec_extr path for TARGET_MMX_WITH_SSE && TARGET_SSE4_1.
	<case E_V8QImode>: Ditto.
	* config/i386/mmx.md (*mmx_pextrw_zext): Rename from mmx_pextrw.
	Use SWI48 mode iterator.  Use %k to output operand 0.
	(*mmx_pextrw): New insn pattern.
	(*mmx_pextrb): Ditto.
	(*mmx_pextrb_zext): Ditto.

2019-08-13  Jonathan Wakely  <jwakely@redhat.com>

	* target.def (libc_has_function, libc_has_fast_function): Improve
	documentation strings.
	* doc/tm.texi: Regenerate.

2019-08-13  Caroline Tice  <cmtice@google.com>

	PR other/91396
	* config/gnu-user.h (GNU_USER_TARGET_ENDFILE_SPEC): Only add the
	vtv_end.o or vtv_end_preinit.o files if !static.

2019-08-13  Olivier Hainque  <hainque@adacore.com>

	* rtl.h (tablejump_casesi_pattern): Move declaration to proper spot.

2019-08-13  Olivier Hainque  <hainque@adacore.com>

	* rtlanal.c (tablejump_casesi_pattern): New function, to
	determine if a tablejump insn is a casesi dispatcher. Extracted
	from patch_jump_insn.
	* rtl.h (tablejump_casesi_pattern): Declare.
	* cfgrtl.c (patch_jump_insn): Use it.
	* dwarf2cfi.c (create_trace_edges): Use it.

2019-08-13  Wilco Dijkstra  <wdijkstr@arm.com>

	PR target/81800
	* gcc/config/aarch64/aarch64.md (lrint): Disable lrint pattern if GPF
	operand is larger than a long int.

2019-08-13  Richard Sandiford  <richard.sandiford@arm.com>

	* machmode.h (opt_mode::else_mode): New function.
	(opt_mode::else_blk): Use it.
	* config/aarch64/aarch64-protos.h (aarch64_vq_mode): Declare.
	(aarch64_full_sve_mode, aarch64_sve_ld1rq_operand_p): Likewise.
	(aarch64_gen_stepped_int_parallel): Likewise.
	(aarch64_stepped_int_parallel_p): Likewise.
	(aarch64_expand_mov_immediate): Remove the optional gen_vec_duplicate
	argument.
	* config/aarch64/aarch64.c
	(aarch64_expand_sve_widened_duplicate): Delete.
	(aarch64_expand_sve_dupq, aarch64_expand_sve_ld1rq): New functions.
	(aarch64_expand_sve_const_vector): Rewrite to handle more cases.
	(aarch64_expand_mov_immediate): Remove the optional gen_vec_duplicate
	argument.  Use early returns in the !CONST_INT_P handling.
	Pass all SVE data vectors to aarch64_expand_sve_const_vector rather
	than handling some inline.
	(aarch64_full_sve_mode, aarch64_vq_mode): New functions, split out
	from...
	(aarch64_simd_container_mode): ...here.
	(aarch64_gen_stepped_int_parallel, aarch64_stepped_int_parallel_p)
	(aarch64_sve_ld1rq_operand_p): New functions.
	* config/aarch64/predicates.md (descending_int_parallel)
	(aarch64_sve_ld1rq_operand): New predicates.
	* config/aarch64/constraints.md (UtQ): New constraint.
	* config/aarch64/aarch64.md (UNSPEC_REINTERPRET): New unspec.
	* config/aarch64/aarch64-sve.md (mov<SVE_ALL:mode>): Remove the
	gen_vec_duplicate from call to aarch64_expand_mov_immediate.
	(@aarch64_sve_reinterpret<mode>): New expander.
	(*aarch64_sve_reinterpret<mode>): New pattern.
	(@aarch64_vec_duplicate_vq<mode>_le): New pattern.
	(@aarch64_vec_duplicate_vq<mode>_be): Likewise.
	(*sve_ld1rq<Vesize>): Replace with...
	(@aarch64_sve_ld1rq<mode>): ...this new pattern.

2019-08-13  Wilco Dijkstra  <wdijkstr@arm.com>

	* config/aarch64/aarch64.c (generic_tunings): Set function alignment to
	16:12.

2019-08-13  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config/msp430/driver-msp430.c (msp430_set_driver_var): New.
	* config/msp430/msp430-devices.c (canonicalize_path_dirsep): New.
	(msp430_check_path_for_devices): New.
	(parse_devices_csv_1): New.
	(parse_devices_csv): New.
	(msp430_extract_mcu_data): Try to find devices.csv and search for the
	MCU data in devices.csv before using the hard-coded data.
	Warn if devices.csv isn't found and the MCU wasn't found in the
	hard-coded data either.
	* config/msp430/msp430.h (DRIVER_SELF_SPECS): Call
	msp430_set_driver_var for -mno-warn-devices-csv and -mdevices-csv-loc.
	Search for devices.csv on -I and -L paths.
	(EXTRA_SPEC_FUNCTIONS): Add msp430_check_path_for_devices and
	msp430_set_driver_var.
	* config/msp430/msp430.opt: Add -mwarn-devices-csv and
	-mdevices-csv-loc=.
	* doc/invoke.texi (-mmcu): Document that -I and -L paths are
	searched for devices.csv.
	(mwarn-devices-csv): Document option.

2019-08-13  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-protos.h (aarch64_output_ptrue): Delete.
	* config/aarch64/aarch64-sve.md (*aarch64_sve_mov<PRED_ALL:mode>):
	Use a single Dn alternative instead of separate Dz and Dm
	alternatives.  Use aarch64_output_sve_move_immediate.
	* config/aarch64/aarch64.c (aarch64_sve_element_int_mode): New
	function.
	(aarch64_simd_valid_immediate): Fill in the simd_immediate_info
	for predicates too.
	(aarch64_output_sve_mov_immediate): Handle predicate modes.
	(aarch64_output_ptrue): Delete.

2019-08-13  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64.c (simd_immediate_info::insn_type): Add
	INDEX.
	(simd_immediate_info::value, simd_immediate_info::step)
	(simd_immediate_info::modifier, simd_immediate_info::shift): Replace
	with...
	(simd_immediate_info::u): ...this new union.
	(simd_immediate_info::simd_immediate_info): Update accordingly.
	(aarch64_output_simd_mov_immediate): Likewise.
	(aarch64_output_sve_mov_immediate): Likewise.

2019-08-13  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config.gcc (msp430*-*-*): Add msp430-devices.o to extra_objs and
	extra_gcc_objs.
	* config/msp430/driver-msp430.c: Remove msp430_mcu_data.
	(msp430_select_cpu): New spec function.
	(msp430_select_hwmult_lib): Use msp430_extract_mcu_data to extract
	MCU data.
	* config/msp430/msp430-devices.c: New file.
	* config/msp430/msp430-devices.h: New file.
	* config/msp430/msp430.c: Remove msp430_mcu_data.
	(msp430_option_override): Use msp430_extract_mcu_data to extract
	MCU data.
	(msp430_use_f5_series_hwmult): Likewise.
	(use_32bit_hwmult): Likewise.
	(msp430_no_hwmult): Likewise.
	* config/msp430/msp430.h (ASM_SPEC): Don't pass -mmcu to the
	assembler.
	(DRIVER_SELF_SPECS): Call msp430_select_cpu if -mmcu is used without
	and -mcpu option.
	(EXTRA_SPEC_FUNCTIONS): Add msp430_select_cpu.
	* config/msp430/t-msp430: Add rule to build msp430-devices.o.
	Remove hard-coded MCU multilib data.

2019-08-13  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64.c (aarch64_classify_vector_mode): Switch
	based on the mode instead of testing properties of it.

2019-08-13  Richard Sandiford  <richard.sandiford@arm.com>

	* doc/md.texi: Document the x and y constraints for AArch64.
	* config/aarch64/aarch64.h (FP_LO8_REGNUM_P): New macro.
	(FP_LO8_REGS): New reg_class.
	(REG_CLASS_NAMES, REG_CLASS_CONTENTS): Add an entry for FP_LO8_REGS.
	* config/aarch64/aarch64.c (aarch64_hard_regno_nregs)
	(aarch64_regno_regclass, aarch64_class_max_nregs): Handle FP_LO8_REGS.
	* config/aarch64/predicates.md (aarch64_simd_register): Use
	FP_REGNUM_P instead of checking the classes manually.
	* config/aarch64/constraints.md (y): New constraint.

2019-08-13  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/iterators.md (perm_insn): Include the "1"/"2" suffix.
	(perm_hilo): Remove UNSPEC_ZIP*, UNSEPC_TRN* and UNSPEC_UZP*.
	* config/aarch64/aarch64-simd.md
	(aarch64_<PERMUTE:perm_insn><PERMUTE:perm_hilo><mode>): Rename to..
	(aarch64_<PERMUTE:perm_insn><mode>): ...this and remove perm_hilo
	from the asm template.
	* config/aarch64/aarch64-sve.md
	(aarch64_<perm_insn><perm_hilo><PRED_ALL:mode>): Rename to..
	(aarch64_<perm_insn><PRED_ALL:mode>): ...this and remove perm_hilo
	from the asm template.
	(aarch64_<perm_insn><perm_hilo><SVE_ALL:mode>): Rename to..
	(aarch64_<perm_insn><SVE_ALL:mode>): ...this and remove perm_hilo
	from the asm template.
	* config/aarch64/aarch64-simd-builtins.def: Update comment.

2019-08-13  Martin Liska  <mliska@suse.cz>

	* value-prof.c (gimple_ic_transform): Add new line.
	Print details with MSG_NOTE.

2019-08-13  Martin Liska  <mliska@suse.cz>

	* doc/invoke.texi: Document automatic detection of jobserver.
	* lto-wrapper.c (run_gcc): Detect jobserver always.

2019-08-13  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (ix86_expand_vector_set) <case E_V2SImode>:
	Use vec_merge path for TARGET_MMX_WITH_SSE && TARGET_SSE4_1.
	<case E_V8QImode>: Ditto.
	* config/i386/mmx.md (*mmx_pinsrd): New insn pattern.
	(*mmx_pinsrb): Ditto.

2019-08-12  Jakub Jelinek  <jakub@redhat.com>

	PR target/83250
	PR target/91340
	* config/i386/avxintrin.h (_mm256_zextpd128_pd256,
	_mm256_zextps128_ps256, _mm256_zextsi128_si256): New intrinsics.
	* config/i386/avx512fintrin.h (_mm512_zextpd128_pd512,
	_mm512_zextps128_ps512, _mm512_zextsi128_si512, _mm512_zextpd256_pd512,
	_mm512_zextps256_ps512, _mm512_zextsi256_si512): Likewise.

2019-08-12  Richard Biener  <rguenther@suse.de>

	PR lto/91375
	* tree.c (free_lang_data_in_type): Do not free TYPE_BINFO dependent on
	flag_devirtualize.

2019-08-12  Richard Biener  <rguenther@suse.de>

	PR driver/91130
	* lto-wrapper.c (get_options_from_collect_gcc_options): Remove
	lang_mask option, always use CL_DRIVER.
	(get_options_from_collect_gcc_options): Adjust.
	(find_and_merge_options): Likewise.
	(run_gcc): Likewise.

2019-08-12  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

	* ipa-predicate.c (add_condition): Restore inverted test.

2019-08-10  Jakub Jelinek  <jakub@redhat.com>

	* tree-core.h (enum omp_clause_code): Add OMP_CLAUSE_DEVICE_TYPE.
	(enum omp_clause_device_type_kind): New enum.
	(struct tree_omp_clause): Add subcode.device_type_kind.
	* tree.h (OMP_CLAUSE_DEVICE_TYPE_KIND): Define.
	* tree.c (omp_clause_num_ops, omp_clause_code_name): Add entries
	for device_type clause.
	(walk_tree_1): Handle OMP_CLAUSE_DEVICE_TYPE.
	* tree-pretty-print.c (dump_omp_clause): Likewise.

	PR target/91408
	* config/i386/mmx.md (usadv8qi): Use register_operand instead of
	vector_operand.

2019-09-09  Vladimir Makarov  <vmakarov@redhat.com>

	* reload1.c (finish_spills): Do not check ira_conflicts_p when
	handling spilled pseudos.

2019-09-09  Richard Earnshaw  <rearnsha@arm.com>

	PR target/91386
	* config/aarch64/aarch64.c (aarch64_gen_adjusted_ldpstp): Use copy_rtx
	to preserve the contents of the original insns.

2019-08-09  Richard Earnshaw  <rearnsha@arm.com>

	* config/arm/arm.md (addsi3_compare_op1): Add 16-bit thumb-2 variants.
	(addsi3_compare_op2): Likewise.

2019-08-09  Martin Liska  <mliska@suse.cz>

	* alias.c (alias_ptr_types_compatible_p): Strengten
	type comparison in LTO mode.

2019-08-09  Richard Sandiford  <richard.sandiford@arm.com>

	PR middle-end/90313
	* tree-tailcall.c (find_tail_calls): Reject calls that might
	read from an escaped RESULT_DECL.

2019-08-09  Martin Liska  <mliska@suse.cz>

	* doc/invoke.texi: Document the option value.
	* lto-wrapper.c (run_gcc): Set auto_parallel
	only with -flto=auto.

2019-08-09  Martin Liska  <mliska@suse.cz>

	* opts.c (common_handle_option): Error for an invalid argument
	to -flto=.

2019-08-09  Martin Liska  <mliska@suse.cz>

	* ipa-icf.c (sem_function::merge): Define AUTO_DUMP_SCOPE and
	use dump_printf to report optimization.
	(sem_variable::merge): Likwise.
	(sem_item_optimizer::merge_classes): Use dump_printf to report
	ICF hits.

2019-08-09  Martin Liska  <mliska@suse.cz>

	* value-prof.c (gimple_divmod_fixed_value_transform):
	Use dump_printf_loc.
	(gimple_mod_pow2_value_transform): Likewise.
	(gimple_mod_subtract_transform): Likewise.
	(init_node_map): Likewise.
	(gimple_ic_transform): Likewise.
	(gimple_stringops_transform): Likewise.

2019-08-08  Mihailo Stojanovic  <mistojanovic@wavecomp.com>

	* doc/extend.texi: Add const qualifier to ld intrinsics.

2019-08-08  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/dfp.md (D64_D128): Rename to ...
	(DDTD): ... this, throughout.
	(dfp_suffix): Rename to ...
	(q): ... this, throughout.

2019-08-08  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/dfp.md (D64_D128): Move earlier in the file.
	(dfp_suffix): Ditto.
	(adddd3, addtd3): Merge to ...
	(add<mode>3 for D64_D128): ... this.
	(subdd3, subtd3): Merge to ...
	(sub<mode>3 for D64_D128): ... this.
	(muldd3, multd3): Merge to ...
	(mul<mode>3 for D64_D128): ... this.
	(divdd3, divtd3): Merge to ...
	(div<mode>3 for D64_D128): ... this.
	(*cmpdd_internal1, *cmptd_internal1): Merge to ...
	(*cmp<mode>_internal1 for D64_D128): ... this.
	(ftruncdd2, ftrunctd2): Merge to ...
	(ftrunc<mode>2 for D64_D128): ... this.
	(fixdddi2, fixtddi2): Merge to ...
	(fix<mode>di2 for D64_D128): ... this.

2019-08-08  Jim Wilson  <jimw@sifive.com>

	PR target/91229
	* config/riscv/riscv.c (riscv_flatten_aggregate_field): New arg
	ignore_zero_width_bit_field_p.  Skip zero size bitfields when true.
	Pass into recursive call.
	(riscv_flatten_aggregate_argument): New arg.  Pass to
	riscv_flatten_aggregate_field.
	(riscv_pass_aggregate_in_fpr_pair_p): New local warned.  Call
	riscv_flatten_aggregate_argument twice, with false and true as last
	arg.  Process result twice.  Compare results and warn if different.
	(riscv_pass_aggregate_in_fpr_and_gpr_p): Likewise.

2019-08-08  Martin Liska  <mliska@suse.cz>

	PR bootstrap/91352
	* gcc.c (driver::detect_jobserver): Use is_valid_fd.
	* lto-wrapper.c (jobserver_active_p): Likewise.

2019-08-08  Martin Liska  <mliska@suse.cz>

	* cgraphclones.c (set_new_clone_decl_and_node_flags): Drop
	IS_OPERATOR_NEW and IS_OPERATOR_DELETE.
	(create_version_clone_with_body): Likewise.

2019-08-08  Jakub Jelinek  <jakub@redhat.com>

	* gimplify.c (omp_add_variable): Use GOVD_PRIVATE | GOVD_EXPLICIT
	for VLA helper variables on target data even if not GOVD_FIRSTPRIVATE.
	(gimplify_scan_omp_clauses): For OMP_CLAUSE_USE_DEVICE_* use just
	GOVD_EXPLICIT flags.
	(gimplify_omp_workshare): For OMP_TARGET_DATA move all
	OMP_CLAUSE_USE_DEVICE_* clauses to the end of clauses chain.
	* omp-low.c (scan_sharing_clauses): For OMP_CLAUSE_USE_DEVICE_*
	call install_var_field with mask 11 instead of 3.
	(lower_omp_target): For OMP_CLAUSE_USE_DEVICE_* use pass
	(splay_tree_key) &DECL_UID (var) to build_sender_ref instead of var.

2019-08-07  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/constraints.md (Z): Handle floating-point zeros too.
	* config/aarch64/predicates.md (aarch64_reg_or_zero): Likewise.

2019-08-07  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-sve.md (vec_shl_insert_<mode>): Add
	MOVPRFX alternatives.  Make the GPR alternatives more expensive
	than the FPR ones.

2019-08-07  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-sve.md (fold_extract_last_<mode>):
	Disparage the GPR alternative relative to the FPR one.
	Fix handling of 8-bit and 16-bit FPR values.

2019-08-07  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/iterators.md (BITWISEV): Delete.
	(SVE_INT_REDUCTION, SVE_FP_REDUCTION): New int iterators.
	(optab): Handle UNSPEC_UMAXV, UNSPEC_UMINV, UNSPEC_SMAXV,
	UNSPEC_SMINV, UNSPEC_FADDV, UNSPEC_FMAXNMV, UNSPEC_FMAXV,
	UNSPEC_FMINNMV, UNSPEC_FMINV.
	(bit_reduc_op): Delete.
	(sve_int_op): New int attribute.
	(sve_fp_op): Handle UNSPEC_FADDV, UNSPEC_FMAXNMV, UNSPEC_FMAXV,
	UNSPEC_FMINNMV, UNSPEC_FMINV.
	* config/aarch64/aarch64-sve.md
	(reduc_<MAXMINV:maxmin_uns>_scal_<SVE_I:mode>)
	(*reduc_<MAXMINV:maxmin_uns>_scal_<SVE_I:mode>)
	(reduc_<BITWISEV:optab>_scal_<SVE_I:mode>)
	(*reduc_<BITWISEV:optab>_scal_<SVE_I:mode>): Merge into...
	(reduc_<SVE_INT_REDUCTION:optab>_scal_<SVE_I:mode>)
	(*reduc_<SVE_INT_REDUCTION:optab>_scal_<SVE_I:mode>): ...these
	new patterns.
	(reduc_plus_scal_<SVE_F:mode>, *reduc_plus_scal_<SVE_I:mode>)
	(reduc_<FMAXMINV:optab>_scal_<SVE_F:mode>)
	(*reduc_<FMAXMINV:optab>_scal_<SVE_F:mode>): Merge into...
	(reduc_<SVE_FP_REDUCTION:optab>_scal_<SVE_F:mode>)
	(*reduc_<SVE_FP_REDUCTION:optab>_scal_<SVE_F:mode>): ...these
	new patterns.

2019-08-07  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-sve.md (fma<mode>4, *fma<mode>4)
	(fnma<mode>4, *fnma<mode>4, fnms<mode>4, *fnms<mode>4)
	(fms<mode>4, *fms<mode>4): Replace with...
	(<SVE_COND_FP_TERNARY:optab><SVE_F:mode>4)
	(*<SVE_COND_FP_TERNARY:optab><SVE_F:mode>4): ...these new patterns.
	Use unspecs instead of rtx codes.
	(cond_<optab><mode>, *cond_<optab><mode>_2, *cond_<optab><mode>_4)
	(*cond_<optab><mode>_any): Add the predicate to SVE_COND_FP_TERNARY.

2019-08-07  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/iterators.md (SVE_COND_FP_MAXMIN_PUBLIC): New
	int iterator.
	(maxmin_uns_op): Handle UNSPEC_COND_FMAXNM and UNSPEC_COND_FMINNM.
	* config/aarch64/aarch64-sve.md
	(<FMAXMIN:su><FMAXMIN:maxmin><SVE_F:mode>3): Rename to...
	(<SVE_COND_FP_MAXMIN_PUBLIC:optab><SVE_F:mode>3): ...this and
	use a single unspec for the rhs.
	(*<su><maxmin><mode>3): Delete.
	(<maxmin_uns><SVE_F:mode>3): Use a single unspec for the rhs.

2019-08-07  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/iterators.md (UNSPEC_COND_FABS, UNSPEC_COND_FNEG)
	(UNSPEC_COND_FRINTA, UNSPEC_COND_FRINTI, UNSPEC_COND_FRINTM)
	(UNSPEC_COND_FRINTN, UNSPEC_COND_FRINTP, UNSPEC_COND_FRINTX)
	(UNSPEC_COND_FRINTZ, UNSPEC_COND_FSQRT): New unspecs.
	(optab, sve_fp_op): Handle them.
	(SVE_FP_UNARY): Delete.
	(optab): Remove sqrt entry.
	(sve_fp_op): Remove neg, abs and sqrt entries.
	(SVE_COND_FP_UNARY): New int iterator.
	* config/aarch64/aarch64-sve.md (<frint_pattern><mode>2)
	(*<frint_pattern><mode>2): Delete.
	(<SVE_FP_UNARY:optab><SVE_F:mode>2): Replace with...
	(<SVE_COND_FP_UNARY:optab><SVE_F:mode>2): ...this.
	(*<SVE_FP_UNARY:optab><SVE_F:mode>2): Replace with...
	(*<SVE_COND_FP_UNARY:optab><SVE_F:mode>2): ...this.

2019-08-07  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-sve.md (*pred_fold_left_plus_<mode>): Delete.

2019-08-07  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/iterators.md (UNSPEC_COND_ADD): Rename to...
	(UNSPEC_COND_FADD): ...this.
	(UNSPEC_COND_SUB): Rename to...
	(UNSPEC_COND_FSUB): ...this.
	(UNSPEC_COND_MUL): Rename to...
	(UNSPEC_COND_FMUL): ...this.
	(UNSPEC_COND_DIV): Rename to...
	(UNSPEC_COND_FDIV): ...this.
	(UNSPEC_COND_MAX): Rename to...
	(UNSPEC_COND_FMAXNM): ...this.
	(UNSPEC_COND_MIN): Rename to...
	(UNSPEC_COND_FMINNM): ...this.
	(UNSPEC_COND_LT): Rename to...
	(UNSPEC_COND_FCMLT): ...this.
	(UNSPEC_COND_LE): Rename to...
	(UNSPEC_COND_FCMLE): ...this.
	(UNSPEC_COND_EQ): Rename to...
	(UNSPEC_COND_FCMEQ): ...this.
	(UNSPEC_COND_NE): Rename to...
	(UNSPEC_COND_FCMNE): ...this.
	(UNSPEC_COND_GE): Rename to...
	(UNSPEC_COND_FCMGE): ...this.
	(UNSPEC_COND_GT): Rename to...
	(UNSPEC_COND_FCMGT): ...this.
	(SVE_COND_FP_BINARY, SVE_COND_FP_CMP, optab, cmp_op, sve_fp_op)
	(sve_fp_op_rev): Update accordingly.
	* config/aarch64/aarch64.c (aarch64_unspec_cond_code): Likewise.

2019-08-07  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-sve.md: Reorganize contents and add
	banner comments.
	* config/aarch64/check-sve-md.awk: New file.
	* config/aarch64/t-aarch64 (s-check-sve-md): New rule.
	(insn-conditions.md): Depend on it.

2019-08-07  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/91385
	* config/i386/sse.md (*negsi2_1_zext): Simplify insn pattern.
	(*negsi2_cmpz_zext): Ditto.

2019-08-07  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/iterators.md (commutative): Remove.

2019-08-07  Richard Earnshaw  <rearnsha@arm.com>

	PR driver/91130
	* lto-wrapper.c (find_and_merge_options): Use CL_DRIVER when
	processing COLLECT_GCC_OPTIONS.
	(run_gcc): Likewise.

2019-08-07  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	PR tree-optimization/91109
	* lra-remat.c (update_scratch_ops): Remove assignment of the
	hard register.

2019-08-07  Richard Sandiford  <richard.sandiford@arm.com>

	* data-streamer.h (streamer_write_poly_uint64): Declare.
	(streamer_read_poly_uint64): Likewise.
	* data-streamer-in.c (streamer_read_poly_uint64): New function.
	* data-streamer-out.c (streamer_write_poly_uint64): Likewise.
	* ipa-predicate.h (condition::size): Turn into a poly_int64.
	(add_condition): Take a poly_int64 size.
	* ipa-predicate.c (add_condition): Likewise.
	* ipa-prop.h (ipa_load_from_parm_agg): Take a poly_int64 size pointer.
	* ipa-prop.c (ipa_load_from_parm_agg): Likewise.
	(ipcp_modif_dom_walker::before_dom_children): Update accordingly.
	* ipa-fnsummary.c (evaluate_conditions_for_known_args): Handle
	condition::size as a poly_int64.
	(unmodified_parm_1): Take a poly_int64 size pointer.
	(unmodified_parm): Likewise.
	(unmodified_parm_or_parm_agg_item): Likewise.
	(set_cond_stmt_execution_predicate): Update accordingly.
	(set_switch_stmt_execution_predicate): Likewise.
	(will_be_nonconstant_expr_predicate): Likewise.
	(will_be_nonconstant_predicate): Likewise.
	(inline_read_section): Stream condition::size as a poly_int.
	(ipa_fn_summary_write): Likewise.

2019-08-07  Martin Liska  <mliska@suse.cz>

	* fold-const.c (twoval_comparison_p): Replace int
	with bool as a return type.
	(simple_operand_p): Likewise.
	(operand_equal_p): Replace int with bool as a return type.
	* fold-const.h (operand_equal_p): Likewise.

2019-08-07  Jakub Jelinek  <jakub@redhat.com>

	* tree-core.h (enum omp_clause_code): Adjust OMP_CLAUSE_USE_DEVICE_PTR
	OpenMP description.  Add OMP_CLAUSE_USE_DEVICE_ADDR clause.
	* tree.c (omp_clause_num_ops, omp_clause_code_name): Add entries
	for OMP_CLAUSE_USE_DEVICE_ADDR clause.
	(walk_tree_1): Handle OMP_CLAUSE_USE_DEVICE_ADDR.
	* tree-pretty-print.c (dump_omp_clause): Likewise.
	* tree-nested.c (convert_nonlocal_omp_clauses,
	convert_local_omp_clauses): Likewise.
	* gimplify.c (gimplify_scan_omp_clauses, gimplify_adjust_omp_clauses):
	Likewise.
	* omp-low.c (scan_sharing_clauses, lower_omp_target): Likewise.
	Treat OMP_CLAUSE_USE_DEVICE_ADDR like OMP_CLAUSE_USE_DEVICE_PTR
	clause with array or reference to array types, no matter what type
	except for reference it has.

2019-08-07  Kewen Lin  <linkw@gcc.gnu.org>

	* config/rs6000/vector.md (vrotr<mode>3): New define_expand.

2019-08-07  Kito Cheng  <kito.cheng@sifive.com>

	* config/riscv/multilib-generator: (canonical_order): Add 'g'.
	(arch_canonicalize): Support rv32g and rv64g and fix error
	handling.

2019-08-06  Martin Liska  <mliska@suse.cz>

	* cgraph.c (cgraph_node::dump): Dump DECL_IS_OPERATOR_NEW_P
	and DECL_IS_OPERATOR_DELETE_P.

2019-08-06  Jakub Jelinek  <jakub@redhat.com>

	* tree.h (OMP_CLAUSE_LASTPRIVATE_TASKLOOP_IV): Rename to ...
	(OMP_CLAUSE_LASTPRIVATE_LOOP_IV): ... this.  Adjust comment.
	* gimplify.c (gimple_add_tmp_var): In SIMD contexts, turn addressable
	new vars into GOVD_PRIVATE rather than GOVD_LOCAL.
	(gimplify_omp_for): Don't do C++ random access iterator clause
	adjustments on combined constructs from OMP_LOOP.  For OMP_LOOP,
	don't predetermine the artificial iterator in case of C++ random
	access iterators as lastprivate, but private.  For OMP_LOOP, force
	bind expr around simd body and force for_pre_body before the
	construct.  Use OMP_CLAUSE_LASTPRIVATE_LOOP_IV instead of
	OMP_CLAUSE_LASTPRIVATE_TASKLOOP_IV.
	(gimplify_omp_loop): Add firstprivate clauses on OMP_PARALLEL for
	diff var of C++ random access iterators.  Handle
	OMP_CLAUSE_FIRSTPRIVATE.  For OMP_CLAUSE_LASTPRIVATE_LOOP_IV, if
	not outermost also add OMP_CLAUSE_FIRSTPRIVATE, and in both cases
	clear OMP_CLAUSE_LASTPRIVATE_LOOP_IV on the lastprivate clause
	on the OMP_FOR and OMP_DISTRIBUTE constructs if any.
	* omp-low.c (lower_rec_input_clauses): For
	OMP_CLAUSE_LASTPRIVATE_LOOP_IV on simd copy construct the private
	variables instead of default constructing them.
	(lower_lastprivate_clauses): Use OMP_CLAUSE_LASTPRIVATE_LOOP_IV
	instead of OMP_CLAUSE_LASTPRIVATE_TASKLOOP_IV and move the
	is_taskloop_ctx check from the assert to the guarding condition.

2019-08-06  Kito Cheng  <kito.cheng@sifive.com>

	* config/riscv/multilib-generator: (canonical_order): New.
	(arch_canonicalize): Dito.
	Apply arch_canonicalize for alts.

2019-08-05  Martin Sebor  <msebor@redhat.com>

	* doc/extend.texi (Common Variable Attributes): Document alias
	attribute.

2019-08-05  Marek Polacek  <polacek@redhat.com>

	PR c++/91338 - Implement P1161R3: Deprecate a[b,c].
	* doc/invoke.texi: Document -Wcomma-subscript.

2019-08-05  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-core.h (tree_function_decl): Make function_code an
	independent field.  Group the remaining bitfields into bytes
	and move decl_type so that it contines to be at a byte boundary.
	Leave 12 bits for future expansion.

2019-08-05  Richard Sandiford  <richard.sandiford@arm.com>

	* gimple-fold.c (gimple_fold_mask_load_store_mem_ref)
	(gimple_fold_mask_load, gimple_fold_mask_store): New functions.
	(gimple_fold_call): Use them to fold IFN_MASK_LOAD and
	IFN_MASK_STORE.

2019-08-05  Richard Sandiford  <richard.sandiford@arm.com>

	* gimple.h (gimple_move_vops): Declare.
	* gimple.c (gimple_move_vops): New function
	* gimple-fold.c (replace_call_with_call_and_fold)
	(gimple_fold_builtin_memory_op, gimple_fold_builtin_memset)
	(gimple_fold_builtin_stpcpy, fold_builtin_atomic_compare_exchange)
	(gimple_fold_call): Use it.
	* ipa-param-manipulation.c (ipa_modify_call_arguments): Likewise.
	* tree-call-cdce.c (use_internal_fn): Likewise.
	* tree-if-conv.c (predicate_load_or_store): Likewise.
	* tree-ssa-ccp.c (optimize_atomic_bit_test_and): Likewise.
	* tree-ssa-math-opts.c (pass_cse_reciprocals::execute): Likewise.
	* tree-ssa-propagate.c (finish_update_gimple_call): Likewise.
	(update_call_from_tree): Likewise.
	* tree-vect-stmts.c (vectorizable_load): Likewise.
	* tree-vectorizer.c (adjust_simduid_builtins): Likewise.

2019-08-05  Martin Liska  <mliska@suse.cz>

	PR c++/91334
	* tree-ssa-dce.c (propagate_necessity): Handle new operators
	with not arguments.
	(eliminate_unnecessary_stmts): Likewise.

2019-08-05  Richard Biener  <rguenther@suse.de>

	PR middle-end/91169
	* fold-const.c (get_array_ctor_element_at_index): Create
	offset_ints according to the sign of the index type and treat
	that as signed if it is obviously so.

2019-08-05  Jakub Jelinek  <jakub@redhat.com>

	PR target/91341
	* config/i386/avxintrin.h (_mm256_loadu2_m128, _mm256_storeu2_m128,
	_mm256_loadu2_m128d, _mm256_storeu2_m128d, _mm256_loadu2_m128i,
	_mm256_storeu2_m128i): New function.

2019-08-05  Kito Cheng  <kito.cheng@sifive.com>

	* config/riscv/riscv.c (riscv_promote_function_mode): New.
	(TARGET_PROMOTE_FUNCTION_MODE): Use riscv_promote_function_mode.

2019-08-05  Alan Modra  <amodra@gmail.com>

	PR target/91349
	* config/rs6000/freebsd64.h (CPLUSPLUS_CPP_SPEC),
	(LINK_GCC_C_SEQUENCE_SPEC): Undef.

2019-08-04  Gerald Pfeifer  <gerald@pfeifer.com>

	* doc/install.texi (Prerequisites): Remove reference to Tcl 8.6
	bug that was fixed in Tcl 8.6.1.

2019-08-02  Michael Meissner  <meissner@linux.ibm.com>

	* config/rs6000/future.md: New file.
	* config/rs6000/rs6000.md: Include future.md.
	* config/rs6000/t-rs6000 (MD_INCLUDES): Add future.md.

2019-08-02  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	* function.c (assign_parm_adjust_stack_rtl): Revise STRICT_ALIGNMENT
	check to use targetm.slow_unaligned_access instead.

	* function.c (assign_param_data_one): Remove unused data members.

2019-08-02  Steve Ellcey  <sellcey@marvell.com>

	* omp-simd-clone.c (simd_clone_adjust_return_type): Remove call to
	build_distinct_type_copy.
	(simd_clone_adjust_argument_types): Ditto.
	(simd_clone_adjust): Call build_distinct_type_copy here.
	(expand_simd_clones): Ditto.

2019-08-02  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/91201
	* config/i386/sse.md (*vec_extractv16qi_zext): New insn pattern.

2019-08-02  Alexander Monakov  <amonakov@ispras.ru>

	* tree-ssa-loop-im.c (sort_bbs_in_loop_postorder_cmp): Simplify casts
	from 'const void *'.
	(sort_locs_in_loop_postorder_cmp): Likewise.

2019-08-02  Eric Botcazou  <ebotcazou@adacore.com>

	* doc/invoke.texi (hot-bb-count-fraction): Rework description.
	(hot-bb-count-ws-permille): Likewise.
	(hot-bb-frequency-fraction): Likewise.
	(unlikely-bb-count-fraction): Likewise.
	* params.def (hot-bb-count-fraction): Rework description.
	(hot-bb-count-ws-permille): Likewise.
	(hot-bb-frequency-fraction): Likewise.
	(unlikely-bb-count-fraction): Likewise.  Remove min and max values.
	* predict.c (get_hot_bb_threshold): Deal with 0 HOT_BB_COUNT_FRACTION.

2019-08-02  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/91323
	* config/i386/i386-expand.c (ix86_unordered_fp_compare) <case LTGT>:
	Return false.

2019-08-02  Richard Biener  <rguenther@suse.de>

	* vec.h (vec::sort): Add gcc_qsort_r support.
	(vec::bsearch): Add an overload with gcc_qsort_r style callbacks.
	* tree-ssa-loop-im.c (sort_bbs_in_loop_postorder_cmp): Adjust
	to gcc_qsort_r style callback.
	(sort_locs_in_loop_postorder_cmp): Likewise.
	(analyze_memory_references): Use gcc_sort_r interfaces.
	(find_ref_loc_in_loop_cmp): Use new bsearch overload.

2019-08-02  Martin Liska  <mliska@suse.cz>

	PR lto/91313
	* gcc.c (driver::maybe_run_linker): Call detect_jobserver
	to detect working job server.
	(driver::detect_jobserver): Test whether jobserver
	is active from GCC driver. That will prevent situation where
	GCC is invoked from a LD plugin and the linker already uses
	file descriptors suggested by make.  That leads to a wrong
	detection.
	* gcc.h (driver): Add detect_jobserver.
	* lto-wrapper.c (jobserver_active_p): Simplify sscanf by
	not scanning for --jobserver-auth prefix.

2019-08-02  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/91201
	* config/i386/i386-expand.c (ix86_expand_vector_extract): For elt == 0
	V16QImode extraction without sse4.1 try to use V4SImode lowpart
	extraction.

2019-08-01  Martin Sebor  <msebor@redhat.com>

	PR c++/90947
	* tree.c (type_initializer_zero_p): Define.
	* tree.h (type_initializer_zero_p): New function.

2019-08-01  Eric Botcazou  <ebotcazou@adacore.com>

	* cfgrtl.c (relink_block_chain): Add line returns in dump file.

2019-08-01  Eric Botcazou  <ebotcazou@adacore.com>

	* cgraph.h (cgraph_edge::maybe_hot_p): Tweak comment.
	* cgraph.c (cgraph_edge::maybe_hot_p): Likewise.  Remove useless test.
	* predict.c (maybe_hot_count_p): Likewise.
	(maybe_hot_bb_p): Tweak comment.
	(maybe_hot_edge_p): Likewise.
	(probably_never_executed): Likewise.  Minor tweak.
	(probably_never_executed_bb_p): Likewise.
	(unlikely_executed_edge_p): Likewise.
	(probably_never_executed_edge_p): Likewise.
	(optimize_function_for_size_p): Likewise.
	(optimize_function_for_speed_p): Likewise.
	(function_optimization_type): Likewise.
	(optimize_bb_for_size_p): Likewise.
	(optimize_bb_for_speed_p): Likewise.
	(bb_optimization_type): Likewise.
	(optimize_edge_for_size_p): Likewise.
	(optimize_edge_for_speed_p): Likewise.
	(optimize_insn_for_size_p): Likewise.
	(optimize_insn_for_speed_p): Likewise.
	(optimize_loop_for_size_p): Likewise.
	(optimize_loop_for_speed_p): Likewise.
	(optimize_loop_nest_for_speed_p): Likewise.
	(optimize_loop_nest_for_size_p): Likewise.
	(predictable_edge_p): Likewise.
	(handle_missing_profiles): Minor tweak.

2019-08-01  Michael Meissner  <meissner@linux.ibm.com>

	* config/rs6000/predicates.md (pcrel_external_address): Update
	comment.

2019-08-01  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/85693
	* config/i386/mmx.md (usadv8qi): New expander.

2019-08-01  Matthew Beliveau  <mbelivea@redhat.com>

	PR c++/90590
	* c-warn.c (c_do_switch_warnings): Suppress warning for enumerators
	with reserved names that are in a system header.

2019-08-01  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/mmx.md (vec_extractv2si_0): Add (r,x) alternative.
	(*vec_extractv2si_0_zext_sse4): New insn pattern.
	(*vec_extractv2si_0_zext): Ditto.
	(*vec_extractv2si_1): Add (rm,x) alternative.
	(*vec_extractv2si_1_zext): New insn pattern.
	(*vec_extractv2si_zext_mem): Add "TARGET_MMX || TARGET_MMX_WITH_SSE"
	insn constraint.

2019-08-01  Richard Biener  <rguenther@suse.de>

	* domwalk.c (bb_postorder): Remove static variable.
	(cmp_bb_postorder): Adjust.
	(sort_bbs_postorder): Adjust and use gcc_sort_r.
	(dom_walker::walk): Adjust.

2019-08-01  Alexander Monakov  <amonakov@ispras.ru>

	* sort.cc (sort_r_ctx): New struct.
	(reorder23): Make templated on context type.
	(reorder45): Ditto.
	(cmp1): Ditto.  Adjust signature.
	(netsort): Ditto.
	(mergesort): Ditto.
	[CHECKING_P] (cmp2to3): New static function.  Use it...
	(gcc_qsort) [CHECKING_P]: ...here.
	(gcc_sort_r): New function.
	* system.h (sort_r_cmp_fn): New function typedef.
	(qsort_chk): Adjust signature.
	(gcc_sort_r): Declare.
	* vec.c (qsort_chk_error): Adjust.
	(qsort_chk): Adjust.

2019-08-01  Richard Biener  <rguenther@suse.de>

	* tree-ssa-pre.c (has_abnormal_preds): Remove global var.
	(compute_antic): Localize it here.

2019-07-31  Maxim Blinov  <maxim.blinov@embecosm.com>

	* common/config/riscv/riscv-common.c: Check -march string ends
	with null.

2019-07-31  Alexander Monakov  <amonakov@ispras.ru>

	* ipa-devirt.c (type_warning_cmp): Make static.
	(decl_warning_cmp): Ditto.

2019-07-31  Peter Bergner  <bergner@linux.ibm.com>

	PR target/91050
	* config/rs6000/rs6000.opt (mdejagnu-cpu=): Delete option.
	* config/rs6000/rs6000.c (rs6000_option_override_internal): Remove
	use of deleted rs6000_dejagnu_cpu_index variable.
	* config/rs6000/rs6000.h (DRIVER_SELF_SPECS): Define.
	(SUBTARGET_DRIVER_SELF_SPECS): Likewise.
	* config/darwin.h (DRIVER_SELF_SPECS): Rename from this ...
	(SUBTARGET_DRIVER_SELF_SPECS): ...to this.
	* config/i386/i386.h (DRIVER_SELF_SPECS): Define.
	(SUBTARGET_DRIVER_SELF_SPECS): Likewise.

2019-07-31  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91280
	* tree-ssa-structalias.c (get_constraint_for_component_ref):
	Decompose MEM_REF manually for offset handling.

2019-07-31  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91293
	* tree-vect-slp.c (vect_build_slp_tree_2): Do not swap operands
	of reduction stmts.

2019-07-31  Matt Thomas  <matt@3am-software.com>
	    Nick Hudson  <nick@nthcliff.demon.co.uk>
	    Matthew Green  <mrg@eterna.com.au>
	    Maya Rashish  <coypu@sdf.org>

	* config.gcc (hppa*-*-netbsd*): New target.
	* config/pa/pa-netbsd.h: New file.
	* config/pa/pa32-netbsd.h: New file.

2019-07-31  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/91201
	* config/i386/mmx.md (reduc_plus_scal_v8qi): New expander.

2019-07-31  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn-valu.md
	(scatter<mode>_insn_1offset<exec_scatter>): Remove s_waitcnt.
	(scatter<mode>_insn_1offset_ds<exec_scatter>): Likewise.
	(scatter<mode>_insn_2offsets<exec_scatter>): Likewise.
	* config/gcn/gcn.c (gcn_md_reorg): Add delayeduse and reads to
	struct ilist. Add nops for delayeduse insns.
	* config/gcn/gcn.md (delayeduse): New attribute.
	(*movbi): Remove s_waitcnt from stores.
	(*mov<mode>_insn): Likewise.
	(*movti_insn): Likewise. Add delayeduse attribute.
	(sync_compare_and_swap<mode>_insn): Add delayeduse attribute.
	(atomic_store<mode>): Remove or adjust s_waitcnt.

2019-07-31  Richard Biener  <rguenther@suse.de>

	* vr-values.h (vr_values::swap_vr_value): New.
	(vr_values::free_value_range): likewise.
	* vr-values.c (vr_values::swap_vr_value): Implement.
	* gimple-ssa-evrp-analyze.h (evrp_range_analyzer::pop_value_range):
	Do not return a range or take a var.
	(evrp_range_analyzer::stack): Change back to recording a non-const
	value_range *.
	* gimple-ssa-evrp-analyze.c
	(evrp_range_analyzer::record_ranges_from_stmt): Free unused
	value-range.
	(evrp_range_analyzer::pop_to_marker): Adjust.
	(evrp_range_analyzer::push_value_range): Use new swap_vr_value.
	(evrp_range_analyzer::pop_value_range): Likewise.  Free the
	no longer needed value-range.

2019-07-31  Martin Liska  <mliska@suse.cz>

	* tree-ssa-dce.c (propagate_necessity): Delete operator can
	have size and (or) alignment as 2nd and later arguments.
	Mark all of them as necessary.

2019-07-31  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91178
	* tree-ssa-sccvn.c (vn_reference_maybe_forwprop_address):
	Use tail-recursion.

2019-07-31  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/91201
	* config/i386/sse.md (reduc_plus_scal_v16qi): New expander.
	(REDUC_PLUS_MODE): Add V32QImode for TARGET_AVX and V64QImode for
	TARGET_AVX512F.
	(reduc_plus_scal_<mode>): Improve formatting by introducing
	a temporary.

2019-07-31  Sudakshina Das  <sudi.das@arm.com>

	* config/aarch64/aarch64-builtins.c (enum aarch64_builtins): Add
	AARCH64_TME_BUILTIN_TSTART, AARCH64_TME_BUILTIN_TCOMMIT,
	AARCH64_TME_BUILTIN_TTEST and AARCH64_TME_BUILTIN_TCANCEL.
	(aarch64_init_tme_builtins): New.
	(aarch64_init_builtins): Call aarch64_init_tme_builtins.
	(aarch64_expand_builtin_tme): New.
	(aarch64_expand_builtin): Handle TME builtins.
	* config/aarch64/aarch64-c.c (aarch64_update_cpp_builtins): Define
	__ARM_FEATURE_TME when enabled.
	* config/aarch64/aarch64-option-extensions.def: Add "tme".
	* config/aarch64/aarch64.h (AARCH64_FL_TME, AARCH64_ISA_TME): New.
	(TARGET_TME): New.
	* config/aarch64/aarch64.md (define_c_enum "unspec"): Add UNSPEC_TTEST.
	(define_c_enum "unspecv"): Add UNSPECV_TSTART, UNSPECV_TCOMMIT and
	UNSPECV_TCANCEL.
	(tstart, ttest, tcommit, tcancel): New instructions.
	* config/aarch64/arm_acle.h (__tstart, __tcommit): New.
	(__tcancel, __ttest): New.
	(_TMFAILURE_REASON, _TMFAILURE_RTRY, _TMFAILURE_CNCL): New macro.
	(_TMFAILURE_MEM, _TMFAILURE_IMP, _TMFAILURE_ERR): Likewise.
	(_TMFAILURE_SIZE, _TMFAILURE_NEST, _TMFAILURE_DBG): Likewise.
	(_TMFAILURE_INT, _TMFAILURE_TRIVIAL): Likewise.
	* config/arm/types.md: Add new tme type attr.
	* doc/invoke.texi: Document "tme".

2019-07-31  Joel Hutton  <Joel.Hutton@arm.com>

	* config/arm/arm_cmse.h (cmse_nonsecure_caller): Add
	warn_unused_result attribute.
	(cmse_check_address_range): Add warn_unused_result attribute.

2019-07-31  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91257
	* tree-vrp.c (union_ranges): Unify equality and less tests
	by using compare_values.  Re-order cheap tests first.

2019-07-31  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/91301
	* gimplify.c (gimplify_omp_for): If for class iterator on
	distribute parallel for there is no data sharing clause
	on inner_for_stmt, look for private clause on combined
	parallel too and if found, move it to inner_for_stmt.

2019-07-31  Richard Sandiford  <richard.sandiford@arm.com>

	* lra-int.h (lra_operand_data): Remove early_clobber field.
	(lra_insn_reg): Likewise.
	* lra.c (debug_operand_data): Update accordingly.
	(setup_operand_alternative): Likewise.
	(new_insn_reg): Likewise.  Remove early_clobber parameter.
	(collect_non_operand_hard_regs): Update call accordingly.
	Don't assign to lra_insn_reg::early_clobber.
	(add_regs_to_insn_regno_info): Remove early_clobber parameter
	and update calls to new_insn_reg.
	(lra_update_insn_regno_info): Update calls accordingly.
	* lra-constraints.c (update_and_check_small_class_inputs): Take the
	alternative number as a parameter and test whether the operand
	is earlyclobbered in that particular alternative.
	(process_alt_operands): Update call accordingly.  Use per-alternative
	checks for earyclobber here too.
	* lra-lives.c (reg_early_clobber_p): Check early_clobber_alts
	against zero for IRA_UNKNOWN_ALT.

2019-07-30  Uroš Bizjak  <ubizjak@gmail.com>

	* config/alpha/alpha.c (alpha_option_override): Quote a C type.

2019-07-30  Wilco Dijkstra  <wdijkstr@arm.com>

	* config/arm/thumb2.md (thumb2_movsi_insn): Adjust literal offset.
	* config/arm/vfp.md (thumb2_movsi_vfp): Likewise.

2019-07-30  Martin Liska  <mliska@suse.cz>

	PR ipa/89330
	* cgraph.c (cgraph_edge::make_direct): Use
	edge->indirect_unknown_callee as edge->resolve_speculation can
	deallocate edge which is this pointer.

2019-07-30  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91257
	* bitmap.c (bitmap_ior_and_compl_into): Open-code.

2019-07-30  Martin Liska  <mliska@suse.cz>

	* doc/invoke.texi: Document new behavior.
	* lto-wrapper.c (cpuset_popcount): New function
	is a copy of libgomp/config/linux/proc.c.
	(init_num_threads): Likewise.
	(run_gcc): Automatically detect core count for -flto.
	(jobserver_active_p): New function.

2019-07-30  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91257
	* bitmap.h (bitmap_ior_into_and_free): Declare.
	* bitmap.c (bitmap_list_unlink_element): Add defaulted param
	whether to add the unliked element to the freelist.
	(bitmap_list_insert_element_after): Add defaulted param for
	an already allocated element.
	(bitmap_ior_into_and_free): New function.
	* tree-ssa-structalias.c (condense_visit): Reduce the
	ponts-to and edge bitmaps of the SCC members in a
	logarithmic fashion rather than all to one.

2019-07-30  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-ssa-math-opts.c (convert_mult_to_fma): Add a mul_cond
	parameter.  When nonnull, make sure that the addition or subtraction
	has the same condition.
	(math_opts_dom_walker::after_dom_children): Try convert_mult_to_fma
	for CFN_COND_MUL too.

2019-07-30  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91291
	* tree-ssa-sccvn.c (rpo_elim::eliminate_push_avail): Ignore
	constant values.

2019-07-30  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/91216
	* omp-low.c (global_nonaddressable_vars): New variable.
	(use_pointer_for_field): For global decls, if they are non-addressable,
	remember it in the global_nonaddressable_vars bitmap, if they are
	addressable and in the global_nonaddressable_vars bitmap, ignore their
	TREE_ADDRESSABLE bit.
	(omp_copy_decl_2): Clear TREE_ADDRESSABLE also on private copies of
	vars in global_nonaddressable_vars bitmap.
	(execute_lower_omp): Free global_nonaddressable_vars bitmap.

	PR target/91150
	* config/i386/i386-expand.c (expand_vec_perm_blend): Change mask type
	from unsigned to unsigned HOST_WIDE_INT.  For E_V64QImode cast
	comparison to unsigned HOST_WIDE_INT before shifting it left.

2019-07-30  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (movstrict<mode>): Use register_operand
	predicate for operand 0.  Add expander condition.  Assert that
	operand 0 is a SUBREG RTX.
	(*movstrict<mode>_1): Use register_operand predicate for operand 0.
	Update operand constraints and insn condition.
	(zero_extend<mode>si2_and): Do not call gen_movstrict<mode>.
	(zero_extendqihi2_and): Do not call gen_movstrictqi.
	(*setcc_qi_slp): Use register_operand predicate for operand 0.
	Update operand 0 constraints.
	(setcc_qi_slp splitters): Use register_operand predicate for operand 0.

2019-07-29  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config/msp430/msp430.h (DRIVER_SELF_SPECS): Define and emit errors
	when -m{code,data}-region are used without -mlarge.
	* config/msp430/msp430.c (msp430_option_override): Error when a
	non-default code or data region is used without -mlarge.
	(msp430_section_attr): Emit a warning and do not add upper/lower/either
	attributes when they are used without -mlarge.

2019-07-29  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	PR target/70320
	* config/msp430/msp430.h: Define ADDITIONAL_REGISTER_NAMES.

2019-07-29  Richard Sandiford  <richard.sandiford@arm.com>

	PR middle-end/91242
	* wide-int.h (generic_wide_int::sext_elt): New function.
	* inchash.h (hash::add_wide_int): Use it instead of elt.

2019-07-29  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/arm/arm-builtins.c (acle_builtin_data): Expand VAR1 to
	CODE_FOR_arm_##.
	* config/arm/arm.md (<crc_variant>): Rename to...
	(arm_<crc_variant>): ... This.
	(<cdp>): Rename to...
	(arm_<cdp>): ... This.
	(<ldc>): Rename to...
	(arm_<ldc>): ... This.
	(<stc>): Rename to...
	(arm_<stc>): ... This.
	(<mcr>): Rename to...
	(arm_<mcr>): ... This.
	(<mrc>): Rename to...
	(arm_<mrc>): ... This.
	(<mcrr>): Rename to...
	(arm_<mcrr>): ... This.
	(<mrrc>): Rename to...
	(arm_<mrrc>): ... This.

2019-07-29  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91257
	* tree-ssa-sccvn.h (struct vn_avail): New.
	(struct vn_ssa_aux): Add avail member.
	* tree-ssa-sccvn.c (class rpo_elim): Remove m_rpo_avail
	member, add m_avail_freelist one.
	(rpo_elim::~rpo_elim): Remove.
	(rpo_elim::eliminate_avail): Adjust to new avail tracking
	data structure.
	(rpo_elim::eliminate_push_avail): Likewise.
	(do_unwind): Likewise.
	(do_rpo_vn): Likewise.

2019-07-29  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91257
	* tree-vrp.c (operand_less_p): Avoid dispatching to fold for
	most cases, instead call compare_values which handles the
	symbolic ranges we handle specially.
	(compare_values_warnv): Do not call operand_less_p but open-code
	the effective fold calls.  Avoid converting so much.

2019-07-29  Martin Liska  <mliska@suse.cz>

	* tree-ssa-dce.c (eliminate_unnecessary_stmts): Do not
	remove LHS of operator new call.  It's handled latter.

2019-07-29  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91267
	* vr-values.c (vr_values::update_value_range): Add early return
	for effectively VARYING lattice entry.

2019-07-29  Richard Sandiford  <richard.sandiford@arm.com>

	PR debug/86638
	* tree-ssa-dce.c (keep_all_vdefs_p): New function.
	(mark_stmt_if_obviously_necessary): Mark all stmts with vdefs as
	necessary if keep_all_vdefs_p is true.
	(mark_aliased_reaching_defs_necessary): Add a gcc_checking_assert
	that keep_all_vdefs_p is false.
	(mark_all_reaching_defs_necessary): Likewise.
	(propagate_necessity): Skip the vuse scan if keep_all_vdefs_p is true.

2019-07-29  Richard Sandiford  <richard.sandiford@arm.com>

	* common.opt (Og): Change the initial value of flag_dse to 0.
	* opts.c (default_options_table): Move OPT_ftree_dse from
	OPT_LEVELS_1_PLUS to OPT_LEVELS_1_PLUS_NOT_DEBUG.  Also add
	OPT_fdse to OPT_LEVELS_1_PLUS_NOT_DEBUG.  Put the OPT_ftree_pta
	entry before the OPT_ftree_sra entry.
	* doc/invoke.texi (Og): Add -fdse and -ftree-dse to the list
	of flags disabled by Og.

2019-07-29  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-cfg.c (execute_fixup_cfg): Don't delete stores to write-only
	variables for -Og.

2019-07-29  Richard Sandiford  <richard.sandiford@arm.com>

	* doc/sourcebuild.texi (check-function-bodies): Document.

2019-07-29  Richard Sandiford  <richard.sandiford@arm.com>

	* simplify-rtx.c (simplify_const_unary_operation): Fold a
	VEC_DUPLICATE of a fixed-length vector even if the result
	is variable-length.  Likewise fold a duplicate of a
	variable-length vector if the variable-length vector is
	itself a duplicate of a fixed-length sequence.
	(test_vector_ops_duplicate): Test more cases.

2019-07-29  Richard Sandiford  <richard.sandiford@arm.com>

	* vector-builder.h (vector_builder): Add a shape template parameter.
	(vector_builder::new_unary_operation): New function, generalizing
	the old tree_vector_builder function.
	(vector_builder::new_binary_operation): Likewise.
	(vector_builder::binary_encoded_nelts): Likewise.
	* int-vector-builder.h (int_vector_builder): Update template
	parameters to vector_builder.
	(int_vector_builder::shape_nelts): New function.
	* rtx-vector-builder.h (rtx_vector_builder): Update template
	parameters to vector_builder.
	(rtx_vector_builder::shape_nelts): New function.
	(rtx_vector_builder::nelts_of): Likewise.
	(rtx_vector_builder::npatterns_of): Likewise.
	(rtx_vector_builder::nelts_per_pattern_of): Likewise.
	* tree-vector-builder.h (tree_vector_builder): Update template
	parameters to vector_builder.
	(tree_vector_builder::shape_nelts): New function.
	(tree_vector_builder::nelts_of): Likewise.
	(tree_vector_builder::npatterns_of): Likewise.
	(tree_vector_builder::nelts_per_pattern_of): Likewise.
	* tree-vector-builder.c (tree_vector_builder::new_unary_operation)
	(tree_vector_builder::new_binary_operation): Delete.
	(tree_vector_builder::binary_encoded_nelts): Likewise.
	* simplify-rtx.c: Include rtx-vector-builder.h.
	(distributes_over_addition_p): New function.
	(simplify_const_unary_operation)
	(simplify_const_binary_operation): Generalize handling of vector
	constants to include variable-length vectors.
	(test_vector_ops_series): Add more tests.

2019-07-28  Jan Hubicka  <hubicka@ucw.cz>

	PR lto/91222
	* ipa-devirt.c (warn_types_mismatch): Compare indentifiers
	than INDENTIFIER_POINTER.

2019-07-28  Martin Liska  <mliska@suse.cz>

	PR ipa/89330
	* cgraph.c (symbol_table::create_edge): Always allocate
	a cgraph_edge.
	(symbol_table::free_edge): Store summary_id to
	edge_released_summary_ids if != -1;
	* cgraph.h (NEXT_FREE_NODE): Remove.
	(SET_NEXT_FREE_NODE): Likewise.
	(NEXT_FREE_EDGE): Likewise.
	(symbol_table::release_symbol): Store summary_id to
	cgraph_released_summary_ids if != -1;
	(symbol_table::allocate_cgraph_symbol): Always allocate
	a cgraph_node.

2019-07-28  Alan Modra  <amodra@gmail.com>

	* config/rs6000/rs6000-call.c (rs6000_output_mi_thunk): Use
	gen_sibcall.

2019-07-28  Alan Modra  <amodra@gmail.com>

	PR target/91135
	* config/rs6000/linux.h (GNU_USER_TARGET_D_OS_VERSIONS): Don't
	define.
	* config/rs6000/linux64.h (TARGET_OS_CPP_BUILTINS): Invoke
	GNU_USER_TARGET_OS_CPP_BUILTINS for aixdesc abi.
	(GNU_USER_TARGET_D_OS_VERSIONS): Don't define.

2019-07-28  Alan Modra  <amodra@gmail.com>

	PR target/91050
	* config/rs6000/sysv4.h (ASM_DEFAULT_SPEC): Modify if -m64.
	* config/rs6000/default64.h (ASM_DEFAULT_SPEC): Define.
	* config/rs6000/freebsd64.h (ASM_DEFAULT_SPEC): Don't define.
	* config/rs6000/linux64.h (ASM_DEFAULT_SPEC): Likewise.
	* config/rs6000/rtems.h (ASM_DEFAULT_SPEC): Likewise.
	* config/rs6000/rs6000.h (ASM_DEFAULT_EXTRA): Define and use
	in asm_default spec.
	* config/rs6000/eabialtivec.h (ASM_DEFAULT_EXTRA): Redefine.
	* config/rs6000/linuxaltivec.h (ASM_DEFAULT_EXTRA): Redefine.

2019-07-28  Gerald Pfeifer  <gerald@pfeifer.com>

	* doc/include/gpl_v3.texi (Copying): Use https for www.gnu.org.

2019-07-26  Tamar Christina  <tamar.christina@arm.com>

	PR target/89517
	* config.gcc: Relax parsing of AARCH64_OPT_EXTENSION.
	* config/aarch64/aarch64-option-extensions.def: Add new comments
	and restore easier to read options.

2019-07-26  Tamar Christina  <tamar.christina@arm.com>

	* convert.c (convert_to_real_1): Move part of conversion code...
	* match.pd: ...To here.

2019-07-26  Martin Jambor  <mjambor@suse.cz>

	PR ipa/89330
	* ipa-inline-transform.c (check_speculations_1): New function.
	(push_all_edges_in_set_to_vec): Likewise.
	(check_speculations): Use check_speculations_1, new parameter
	new_edges.
	(inline_call): Pass new_edges to check_speculations.
	* ipa-inline.c (add_new_edges_to_heap): Assert edge_callee is not
	NULL.
	(speculation_useful_p): Early return true if edge is inlined, remove
	later checks for inline_failed.

2019-07-25  Vladimir Makarov  <vmakarov@redhat.com>

	PR rtl-optimization/91223
	* lra-constraints.c (process_alt_operands): Fail for unsuccessful
	matching with INOUT operand.

2019-07-25  Eric Botcazou  <ebotcazou@adacore.com>

	* stmt.c (expand_case): Try to narrow the index type if it's larger
	than a word.  Tidy up.

2019-07-25  Eric Botcazou  <ebotcazou@adacore.com>

	* cif-code.def (NEVER_CALL): New code.
	* ipa-inline.c (want_inline_small_function_p): Fix formatting issues.
	Set the failure to CIF_NEVER_CALL if the IPA count is zero.

2019-07-25  Wilco Dijkstra  <wdijkstr@arm.com>

	* config/arm/thumb2.md (thumb2_movsi_insn): Fix load/store low reg.
	* config/arm/vfp.md (thumb2_movsi_vfp): Likewise.

2019-07-23  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-devirt.c (add_type_duplicate): Fix return value.

2019-07-25  Richard Biener  <rguenther@suse.de>

	* tree-vrp.c (extract_range_from_multiplicative_op): Add
	type parameter and use it instead of guessing expression
	type from the first operand.
	(extract_range_from_binary_expr): Pass expr_type down.

2019-07-25  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/arm/arm.md (SATrev): Change to code attribute.
	(*satsi_<SAT:code>): Adjust for the above.
	(*satsi_<SAT:code>_shift): Likewise.

2019-07-25  Richard Biener  <rguenther@suse.de>

	* gimple-loop-versioning.cc (loop_versioning::prune_loop_conditions):
	Make value_range * temporary const.
	* gimple-ssa-evrp-analyze.c (evrp_range_analyzer::try_find_new_range):
	Likewise.
	(evrp_range_analyzer::record_ranges_from_): Likewise.
	(evrp_range_analyzer::pop_value_range): Return a const value_range *,
	deal with having recorded a const one.
	* gimple-ssa-evrp-analyze.h (evrp_range_analyzer::get_value_range):
	Return a const value_range *.
	(evrp_range_analyzer::pop_value_range): Likewise.
	(evrp_range_analyzer::stack): Record const value_range *s.
	* gimple-ssa-evrp.c (evrp_dom_walker::before_dom_children):
	Adjust.
	* gimple-ssa-sprintf.c (get_int_range): Likewise.
	(format_integer): Likewise.
	(sprintf_dom_walker::handle_gimple_call): Likewise.
	* tree-ssa-dom.c (simplify_stmt_for_jump_threading): Likewise.
	* tree-vrp.c (vrp_prop::set_def_to_varying): Add.
	(vrp_prop::get_value_range): Adjust.
	(vrp_prop::vrp_initialize): Use set_def_to_varying instead of
	modifying the lattice in-place.
	(vrp_prop::visit_stmt): Likewise.
	* vr-values.c (vr_values::get_lattice_entry): New private method.
	(vr_values::get_value_range): Wrap it and return a const
	value_range *.
	(vr_values::set_def_to_varying): New.
	(vr_values::set_defs_to_varying): Use it.
	(vr_values::update_value_range): Likewise.
	(vr_values::vrp_stmt_computes_nonzero): Adjust.
	(values::op_with_constant_singleton_va): Likewise.
	(vr_values::extract_range_for_var_from_co): Likewise.
	(vr_values::extract_range_from_ssa_name): Likewise.
	(vr_values::extract_range_from_cond_expr): Likewise.
	(vr_values::extract_range_basic): Likewise.
	(compare_ranges): Take const value_range *, adjust.
	(compare_range_with_value): Likewise.
	(vrp_valueize): Adjust.
	(vrp_valueize_1): Likewise.
	(vr_values::get_vr_for_comparison): Return a const value_range *.
	(vr_values::compare_name_with_value): Adjust.
	(vr_values::compare_names): Likewise.
	(vr_values::vrp_evaluate_conditional_warnv_with_ops_using_ranges):
	Likewise.
	(vr_values::vrp_evaluate_conditional): Likewise.
	(find_case_label_ranges): Take a const value_range *.
	(vr_values::vrp_visit_switch_stmt): Adjust.
	(vr_values::extract_range_from_phi_node): Likewise.
	(vr_values::simplify_div_or_mod_using_ran): Likewise.
	(vr_values::simplify_abs_using_ranges): Likewise.
	(test_for_singularity): Take a const value_range *.
	(range_fits_type_p): Likewise.
	(vr_values::simplify_cond_using_ranges_1): Adjust.
	(vr_values::simplify_cond_using_ranges_2): Likewise.
	(vr_values::simplify_switch_using_ranges): Likewise.
	(vr_values::simplify_float_conversion_usi): Likewise.
	(vr_values::two_valued_val_range_p): Likewise.
	* vr-values.h (vr_values::get_value_range): Return a const
	value_range *.
	(vr_values::set_def_to_varying): New.
	(vr_values::get_lattice_entry): New private method.
	(vr_values::get_vr_for_comparison): Return a const value_range *.

2019-07-25  Martin Liska  <mliska@suse.cz>
	    Dominik Infuhr  <dominik.infuehr@theobroma-systems.com>

	PR c++/23383
	* common.opt: Add -fallocation-dce
	* gimple.c (gimple_call_operator_delete_p): New.
	* gimple.h (gimple_call_operator_delete_p): Likewise.
	* tree-core.h (enum function_decl_type): Add OPERATOR_DELETE.
	* tree-ssa-dce.c (mark_stmt_if_obviously_necessary): Handle
	DECL_IS_OPERATOR_DELETE_P.
	(mark_all_reaching_defs_necessary_1): Likewise.
	(propagate_necessity): Likewise.
	(eliminate_unnecessary_stmts): Handle
	gimple_call_operator_delete_p.
	* tree-streamer-in.c (unpack_ts_function_decl_value_fields):
	Add packing of OPERATOR_DELETE.
	* tree-streamer-out.c (pack_ts_function_decl_value_fields):
	Similarly here.
	* tree.h (DECL_IS_OPERATOR_DELETE_P): New.
	(DECL_SET_IS_OPERATOR_DELETE): New.
	(DECL_IS_REPLACEABLE_OPERATOR_NEW_P): Likewise.

2019-07-25  Martin Liska  <mliska@suse.cz>

	* calls.c (maybe_warn_alloc_args_overflow): Use new macros
	(e.g. DECL_SET_LAMBDA_FUNCTION and DECL_LAMBDA_FUNCTION_P).
	* coverage.c (coverage_begin_function): Likewise.
	* fold-const.c (tree_expr_nonzero_warnv_p): Likewise.
	* gimple.c (gimple_call_nonnull_result_p): Likewise.
	* ipa-icf.c (sem_item::compare_referenced_symbol_properties): Likewise.
	(sem_item::hash_referenced_symbol_properties): Likewise.
	* lto-streamer-out.c (hash_tree): Likewise.
	* predict.c (expr_expected_value_1): Likewise.
	* tree-inline.c (expand_call_inline): Likewise.
	* tree-streamer-in.c (unpack_ts_function_decl_value_fields): Likewise.
	* tree-streamer-out.c (pack_ts_function_decl_value_fields): Likewise.
	* tree-core.h (enum function_decl_type): New enum.
	(struct tree_function_decl): Remove operator_new_flag and lambda_function.
	* tree.h (FUNCTION_DECL_DECL_TYPE): New.
	(set_function_decl_type): Likewise.
	(DECL_IS_OPERATOR_NEW_P): New.
	(DECL_SET_IS_OPERATOR_NEW): Likewise.
	(DECL_LAMBDA_FUNCTION): Likewise.
	(DECL_LAMBDA_FUNCTION_P): Likewise.
	(DECL_IS_OPERATOR_NEW): Remove.
	(DECL_SET_LAMBDA_FUNCTION): Likewise.

2019-07-25  Xiong Hu Luo  <luoxhu@linux.ibm.com>

	* ipa-profile.c (get_most_common_single_value): Use
	get_nth_most_common_value.
	* profile.c (sort_hist_value): New function.
	(compute_value_histograms): Call sort_hist_value to sort the
	values after loading from disk.
	* value-prof.c (get_most_common_single_value): Rename to ...
	get_nth_most_common_value.  Add input params n, return
	the n_th value and count.
	(gimple_divmod_fixed_value_transform): Use
	get_nth_most_common_value.
	(gimple_ic_transform): Likewise.
	(gimple_stringops_transform): Likewise.
	* value-prof.h (get_most_common_single_value): Add input params
	n, default to 0.

2019-07-25  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91236
	* tree-ssa-sccvn.c (vn_walk_cb_data::push_partial_def): Fix
	size of CONSTRUCTOR write.  Fix buffer size we pass to
	native_encode_expr.

2019-07-24  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config.gcc (msp430*-*-*): Fix non-GNU style in r273774.
	* config/msp430/msp430.h (ENDFILE_SPEC): Fix non-GNU style in
	r273773.

2019-07-24  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config.gcc (msp430*-*-*): Enable initfini_array by default unless
	explicitly disabled with --disable-initfini-array.

2019-07-24  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config/msp430/msp430.h (ENDFILE_SPEC): Wrap uses of crtn*.o in
	if-exists.

2019-07-24  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/91183
	PR tree-optimization/86688
	* builtins.c (compute_objsize): Handle MEM_REF.
	* tree-ssa-strlen.c (class ssa_name_limit_t): New.
	(get_min_string_length): Remove.
	(count_nonzero_bytes): New function.
	(handle_char_store): Rename...
	(handle_store): to this.  Handle multibyte stores via integer types.
	(strlen_check_and_optimize_stmt): Adjust conditional and the called
	function name.

2019-07-24  Martin Sebor  <msebor@redhat.com>

	PR driver/80545
	* diagnostic.c (diagnostic_classify_diagnostic): Use lang_mask.
	(diagnostic_report_diagnostic): Same.
	* diagnostic.h (diagnostic_context::option_enabled): Add an argument.
	(diagnostic_context::lang_mask): New data member.
	* ipa-pure-const.c (suggest_attribute): Use
	lang_hooks.option_lang_mask ().
	* opts-common.c (option_enabled): Handle new argument.
	(get_option_state): Pass an additional argument.
	* opts.c (print_filtered_help): Print supported languages for
	unsupported options.  Adjust printing of current state.
	* opts.h (option_enabled): Add argument.
	* toplev.c (print_switch_values): Use lang_mask.
	(general_init): Set global_dc->lang_mask.

2019-07-24  Iain Sandoe  <iain@sandoe.co.uk>

	PR bootstrap/87030
	* config/i386/darwin.h (REAL_LIBGCC_SPEC): Revert change from r273749.

2019-07-24  Giuliano Belinassi  <giuliano.belinassi@usp.br>

	* cgraphunit.c (symbol_table::compile): Start and stop
	TV_CGRAPH_IPA_PASSES and TV_CGRAPH_FUNC_EXPANSION timers.
	* timevar.def (TV_CGRAPH_IPA_PASSES, TV_CGRAPH_FUNC_EXPANSION): New.

2019-07-24  Oliver Browne  <oliverbrowne62@gmail.com>

	* gimplify.c (flag_instrument_functions_exclude_p): Include
	namespace/class information in the printable name.
	* opts.c (add_comma_separated_to_vector): Add NUL terminator
	to tokens entered into the vector.

2019-07-24  Eric Botcazou  <ebotcazou@adacore.com>

	* tree-nested.c (build_simple_mem_ref_notrap): New function.
	(get_static_chain): Call it instead of build_simple_mem_ref.
	(get_frame_field): Likewise.
	(get_nonlocal_debug_decl): Likewise.
	(convert_nonlocal_reference_op): Likewise.

2019-07-24  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc-protos.h (arc_output_function_epilogue): Delete
	declaration.
	(arc_compute_frame_size): Millicode is disabled when compiling
	ISR.
	(arc_return_address_register): Likewise.
	(arc_compute_function_type): Likewise.
	(arc_compute_frame_size): Likewise.
	(secondary_reload_info): Likewise.
	(arc_get_unalign): Likewise.
	(arc_can_use_return_insn): Declare.
	* config/arc/arc.c (AUX_LP_START): Define
	(AUX_LP_END): Likewise.
	(arc_frame_info): Update gmask member to 64-bit datum.
	(GMASK_LEN): Update.
	(arc_compute_function_type): Make it static, move it forward.
	(arc_must_save_register): Update, consider the extra regs.
	(arc_compute_millicode_save_restore_regs): Update to use the 64
	bit gmask.
	(arc_compute_frame_size): Likewise.
	(arc_enter_leave_p): Likewise.
	(arc_save_callee_saves): Likewise.
	(arc_restore_callee_saves): Likewise.
	(arc_save_callee_enter): Likewise.
	(arc_restore_callee_leave): Likewise.
	(arc_save_callee_milli): Likewise.
	(arc_restore_callee_milli): Likewise.
	(arc_expand_prologue): Add new interrupt handling.
	(arc_return_address_register): Make it static, move it forward.
	(arc_expand_epilogue): Add new interrupt handling.
	(arc_get_unalign): Delete.
	(arc_epilogue_uses): Make sure we do not remove the extra
	saved/restored registers when interrupt.
	(arc_can_use_return_insn): New function.
	(push_reg): Likewise.
	(pop_reg): Likewise.
	(arc_save_callee_saves): Add ZOL and FPX aux registers saving
	procedures.
	(arc_restore_callee_saves): Likewise, but restoring.
	* config/arc/arc.md (VUNSPEC_ARC_ARC600_RTIE): Define.
	(R33_REG): Likewise.
	(R34_REG): Likewise.
	(R35_REG): Likewise.
	(R36_REG): Likewise.
	(R37_REG): Likewise.
	(R38_REG): Likewise.
	(R39_REG): Likewise.
	(R45_REG): Likewise.
	(R46_REG): Likewise.
	(R47_REG): Likewise.
	(R48_REG): Likewise.
	(R49_REG): Likewise.
	(R50_REG): Likewise.
	(R51_REG): Likewise.
	(R52_REG): Likewise.
	(R53_REG): Likewise.
	(R54_REG): Likewise.
	(R55_REG): Likewise.
	(R56_REG): Likewise.
	(R58_REG): Likewise.
	(type): Add rtie attribute.
	(in_call_delay_slot): Use RETURN_ADDR_REGNUM.
	(movsi_insn): Accept moves to lp_count.
	(rtie): Update pattern.
	(simple_return): Simplify it, don't use this pattern as a return
	from an interrupt.
	(arc600_rtie): New pattern.
	(p_return_i): Clean up.
	(return): Likewise.
	* config/arc/builtins.def (rtie): Only available for non ARC6xx
	family CPUs.
	* config/arc/predicates.md (move_src_operand): Consider lp_count
	as a register.

2019-07-24  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/predicates.md (addv_const_operand): New predicate.
	* config/s390/s390-modes.def (CCO): New condition code mode.
	* config/s390/s390.c (s390_match_ccmode_set): Handle E_CCOmode.
	(s390_branch_condition_mask): Likewise.
	* config/s390/s390.md ("addv<mode>4", "subv<mode>4")
	("mulv<mode>4"): New expanders.
	("*addv<mode>3_ccoverflow", "*addv<mode>3_ccoverflow_const")
	("*subv<mode>3_ccoverflow", "*mulv<mode>3_ccoverflow"): New
	pattern definitions.

2019-07-24  Prathamesh Kulkarni  <prathamesh.kulkarni@linaro.org>

	PR middle-end/91166
	* match.pd (vec_perm_expr(v, v, mask) -> v): New pattern.
	(define_predicates): Add entry for uniform_vector_p.
	(vec_same_elem_p): New match pattern.

2019-07-24  Iain Sandoe  <iain@sandoe.co.uk>

	PR bootstrap/87030
	* config/i386/darwin.h (REAL_LIBGCC_SPEC): Move from here...
	* config/i386/darwin32-biarch.h .. to here.
	* config/i386/darwin64-biarch.h: Adjust comments.
	* config/rs6000/darwin32-biarch.h: Likewise.
	* config/rs6000/darwin64-biarch.h: Likewise.
	* config.gcc: Missed commit from r273746
	(*-*-darwin*): Don't include CPU t-darwin here.
	(i[34567]86-*-darwin*): Adjust to use biarch files. Produce
	an error message if i686-darwin configuration is attempted for
	Darwin >= 18.

2019-07-23  Iain Sandoe  <iain@sandoe.co.uk>

	PR bootstrap/87030
	* config.gcc (*-*-darwin*): Don't include CPU t-darwin here.
	(i[34567]86-*-darwin*): Adjust to use biarch files. Produce
	an error message if i686-darwin configuration is attempted for
	Darwin >= 18.
	(x86_64-*-darwin*): Switch to single multilib for Darwin >= 18.
	(powerpc-*-darwin*): Use biarch files where needed.
	(powerpc64-*-darwin*): Likewise.
	* config/i386/darwin.h (REAL_LIBGCC_SPEC): Move to new biarch file.
	(DARWIN_ARCH_SPEC, DARWIN_SUBARCH_SPEC): Revise for default single
	arch case.
	* config/i386/darwin32-biarch.h: New.
	* config/i386/darwin64.h: Rename.
	* config/i386/darwin64-biarch.h: To this.
	* config/i386/t-darwin: Rename.
	* config/i386/t-darwin32-biarch: To this.
	* config/i386/t-darwin64: Rename.
	* config/i386/t-darwin64-biarch: To this.
	* config/rs6000/darwin32-biarch.h: New.
	* config/rs6000/darwin64.h: Rename.
	* config/rs6000/darwin64-biarch.h: To this.
	(DARWIN_ARCH_SPEC, DARWIN_SUBARCH_SPEC): Revise for default single
	arch case.
	* config/rs6000/t-darwin8: Rename.
	* config/rs6000/t-darwin32-biarch: To this.
	* config/rs6000/t-darwin64 Rename.
	* config/rs6000/t-darwin64-biarch: To this.

2019-07-23  Martin Sebor  <msebor@redhat.com>

	* configure.ac (ACX_PROG_CXX_WARNING_OPTS): Revert r273311.

2019-07-23  Vladislav Ivanishin  <vlad@ispras.ru>

	* gdbinit.in (reload-gdbhooks): New command with an attached doc string.
	(rh): New alias for it.

2019-07-23  Vladislav Ivanishin  <vlad@ispras.ru>

	* gdbhooks.py: Pass replace=True to
	gdb.printing.register_pretty_printer.

2019-07-23  Richard Biener  <rguenther@suse.de>

	PR debug/91231
	* lto-streamer-in.c (input_function): Drop inline-entry markers
	that ended up with an unknown location block.

2019-07-23  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/83518
	* tree-ssa-sccvn.c (vn_reference_lookup_3): Handle aggregate
	init from a constant even when partial defs are already recorded.

2019-07-23  Jan Hubicka  <hubicka@ucw.cz>

	* i386-common.c: Use PROCESSOR_ZNVER2 scheduler for znver2.
	* config/i386/znver1.md: Enable patterns for znver2 and add store
	variants which use extra AGU unit.

2019-07-23  Jan Hubicka  <hubicka@ucw.cz>

	* config/i386/i386-options.c (ix86_option_override_internal): Default
	PARAM_AVOID_FMA_MAX_BITS to 256 for znver2.
	* config/i386/x86-tune.def (X86_TUNE_AVOID_256FMA_CHAINS): Set
	for ZNVER2.

2019-07-23  Jan Hubicka  <hubicka@ucw.cz>

	* config/i386/x86-tune-costs.h (znver2_memcpy): Update.
	(znver2_costs): Update 256 bit SSE costs and multiplication.

2019-07-23  Jan Beulich  <jbeulich@suse.com>

	* config/i386/sse.md (<avx512>_cvtmask2<ssemodesuffix><mode>):
	Require only AVX512F.
	(*<avx512>_cvtmask2<ssemodesuffix><mode>): Likewise.  Add
	alternative expanding to vpternlog.

2019-07-23  Martin Liska  <mliska@suse.cz>

	* dwarf2out.c (gen_producer_string): Canonize -flto=N
	to -flto in dwarf producer string.

2019-07-23  Richard Biener  <rguenther@suse.de>

	* tree-cfg.c (label_for_bb): Remove global var.
	(main_block_label): Take label_for_bb as argument.
	(cleanup_dead_labels_eh): Likewise, adjust.
	(cleanup_dead_labels): Adjust.

2019-07-22  Paul A. Clarke  <pc@us.ibm.com>

	* doc/extend.texi (Basic PowerPC Built-in Functions Available on all
	Configurations): Add documentation for __builtin_mtfsf.

2019-07-22  Ilia Diachkov  <ilia.diachkov@optimitech.com>

	* config/riscv/riscv-opts.h (struct riscv_align_data): New.
	* config/riscv/riscv.c (riscv_constant_alignment): Use
	riscv_align_data_type.
	* config/riscv/riscv.h (RISCV_EXPAND_ALIGNMENT): New.
	(DATA_ALIGNMENT): Use RISCV_EXPAND_ALIGNMENT.
	(LOCAL_ALIGNMENT): Use RISCV_EXPAND_ALIGNMENT.
	* config/riscv/riscv.opt (malign-data): New.
	* doc/invoke.texi (RISC-V Options): Document -malign-data=.

2019-07-02  Giuliano Belinassi  <giuliano.belinassi@usp.br>

	* cgraph.c (dump_graphviz): New function.
	* cgraph.h (dump_graphviz): New function.
	* symtab.c (dump_graphviz): New function.

2019-07-22  Sylvia Taylor  <sylvia.taylor@arm.com>

	* config/aarch64/aarch64-simd.md
	(*aarch64_simd_sra<mode>): New.
	* config/aarch64/iterators.md
	(SHIFTRT): New iterator.
	(sra_op): New attribute.

2019-07-22  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config/msp430/msp430.c (msp430_preserve_reg_p): Don't save
	callee-saved regs R4->R10 in an interrupt function that calls another
	function.

2019-07-22  Paul A. Clarke  <pc@us.ibm.com>

	* config/rs6000/smmintrin.h (_mm_blend_epi16): New.
	(_mm_blendv_epi8): New.

2019-07-22  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91221
	* tree-ssa-sccvn.c (vn_reference_lookup_3): Appropriately
	restrict partial-def handling of empty constructors and
	memset to refs with known offset.

2019-07-22  Jan Beulich  <jbeulich@suse.com>

	* config/i386/sse.md (ternlogsuffix): New.
	(one_cmpl<mode>2): Don't force CONSTM1_RTX into a register when
	AVX512F is in use.
	(<mask_codefor>one_cmpl<mode>2<mask_name>): New.

2019-07-22  Martin Liska  <mliska@suse.cz>

	* config/avr/avr.c (avr_asm_output_aligned_decl_common): Update
	comment.
	* toplev.c (compile_file): Do not emit __gnu_lto_v1 symbol.

2019-07-22  Martin Liska  <mliska@suse.cz>

	* lto-section-in.c (lto_get_section_data):
	Use new function get_compression.
	* lto-streamer-out.c (produce_lto_section): Use
	set_compression to encode compression algorithm.
	* lto-streamer.h (struct lto_section): Do not
	use bitfields in the format.

2019-07-22  Martin Liska  <mliska@suse.cz>

	PR driver/91172
	* opts-common.c (decode_cmdline_option): Decode
	argument of -Werror and check it for a wrong language.
	* opts-global.c (complain_wrong_lang): Remove such case.

2019-07-22  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.c (prepare_move_operands): Always use an
	intermediate register when storing a TLS symbols.

2019-07-22  Stafford Horne  <shorne@gmail.com>

	* config/or1k/or1k.c (or1k_expand_compare): Check for int before
	force_reg.

2019-07-22  Stafford Horne  <shorne@gmail.com>

	* config.gcc (or1k*-*-*): Add mhard-float, mdouble-float, msoft-float
	and munordered-float validations.
	* config/or1k/constraints.md (d): New register constraint.
	* config/or1k/predicates.md (fp_comparison_operator): New.
	* config/or1k/or1k.c (or1k_print_operand): Add support for printing 'd'
	operands.
	(or1k_expand_compare): Normalize unordered comparisons.
	* config/or1k/or1k.h (reg_class): Define DOUBLE_REGS.
	(REG_CLASS_NAMES): Add "DOUBLE_REGS".
	(REG_CLASS_CONTENTS): Add contents for DOUBLE_REGS.
	* config/or1k/or1k.md (type): Add fpu.
	(fpu): New instruction reservation.
	(F, f, fr, fi, FI, FOP, fop): New.
	(<fop><F:mode>3): New ALU instruction definition.
	(float<fi><F:mode>2): New conversion instruction definition.
	(fix_trunc<F:mode><fi>2): New conversion instruction definition.
	(fpcmpcc): New code iterator.
	(*sf_fp_insn): New instruction definition.
	(cstore<F:mode>4): New expand definition.
	(cbranch<F:mode>4): New expand definition.
	* config/or1k/or1k.opt (msoft-float, mhard-float, mdouble-float,
	munordered-float): New options.
	* doc/invoke.texi: Document msoft-float, mhard-float, mdouble-float and
	munordered-float.

2019-07-22  Stafford Horne  <shorne@gmail.com>

	* config.gcc (or1k*-*-*): Add mrori and mror to validation.
	* doc/invoke.texi (OpenRISC Options): Add mrori option, rewrite all
	documenation to be more clear.
	* config/or1k/elf.opt (mboard=, mnewlib): Rewrite documentation to be
	more clear.
	* config/or1k/or1k.opt (mrori): New option.
	(mhard-div, msoft-div, mhard-mul, msoft-mul, mcmov, mror, msext,
	msfimm, mshftimm): Rewrite documentation to be more clear.
	* config/or1k/or1k.md (insn_support): Add ror and rori.
	(enabled): Add conditions for ror and rori.
	(rotrsi3): Replace condition for shftimm with ror and rori.

2019-07-22  Stafford Horne  <shorne@gmail.com>

	PR target/90363
	* config/or1k/or1k.md (zero_extend<mode>si2): Update predicate.
	(extend<mode>si2): Update predicate.
	* config/or1k/predicates.md (volatile_mem_operand): New.
	(reg_or_mem_operand): New.

2019-07-21  Iain Sandoe  <iain@sandoe.co.uk>

	* config/rs6000/rs6000.c (TARGET_NO_PROTOTYPE): Move from here...
	* config/rs6000/rs6000-call.c: ... to here.

2019-07-20  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/predicates.md (offsettable_mem_operand): Allow volatile
	memory.

2019-07-20  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/predicates.md (input_operand): Allow volatile memory.

2019-07-20  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/predicates.md (lwa_operand): Allow volatile memory.

2019-07-20  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/predicates.md (volatile_mem_operand): Modernize syntax.
	(any_memory_operand): New predicate.
	(reg_or_mem_operand): Use it.

2019-07-20  Jakub Jelinek  <jakub@redhat.com>

	PR target/91204
	* optabs.c (expand_unop): As fallback, expand ~op0 as op0 ^ -1.

2019-07-20  John David Anglin  <danglin@gcc.gnu.org>

	* config/pa/pa.h (hppa_profile_hook): Delete declaration.
	* config/pa/pa-protos.h (hppa_profile_hook): Add declaration.

2019-07-20  Jakub Jelinek  <jakub@redhat.com>

	* tree.def (OMP_LOOP): New tree code.
	* tree-core.h (enum omp_clause_code): Add OMP_CLAUSE_BIND.
	(enum omp_clause_bind_kind): New enum.
	(struct tree_omp_clause): Add subcode.bind_kind.
	* tree.h (OMP_LOOP_CHECK): Rename to ...
	(OMP_LOOPING_CHECK): ... this.
	(OMP_FOR_BODY, OMP_FOR_CLAUSES, OMP_FOR_INIT, OMP_FOR_COND,
	OMP_FOR_INCR, OMP_FOR_PRE_BODY, OMP_FOR_ORIG_DECLS): Use
	OMP_LOOPING_CHECK instead of OMP_LOOP_CHECK.
	(OMP_CLAUSE_BIND_KIND): Define.
	* tree.c (omp_clause_num_ops, omp_clause_code_name): Add
	bind clause entries.
	(walk_tree_1): Handle OMP_CLAUSE_BIND.
	* tree-pretty-print.c (dump_omp_clause): Likewise.
	(dump_generic_node): Handle OMP_LOOP.
	* gimplify.c (enum omp_region_type): Add ORT_IMPLICIT_TARGET.
	(in_omp_construct): New variable.
	(is_gimple_stmt): Handle OMP_LOOP.
	(gimplify_scan_omp_clauses): For lastprivate don't set
	check_non_private if code == OMP_LOOP.  For reduction clause
	on OMP_LOOP combined with parallel or teams propagate as shared
	on the combined construct.  Handle OMP_CLAUSE_BIND.
	(gimplify_adjust_omp_clauses): Handle OMP_CLAUSE_BIND.
	(gimplify_omp_for): Pass OMP_LOOP instead of OMP_{FOR,DISTRIBUTE}
	for constructs from a loop construct to gimplify_scan_omp_clauses.
	Don't predetermine iterator linear on OMP_SIMD from loop construct.
	(replace_reduction_placeholders, gimplify_omp_loop): New functions.
	(gimplify_omp_workshare): Use ORT_IMPLICIT_TARGET instead of trying
	to match the implicit ORT_TARGET construct around whole body.
	Temporarily clear in_omp_construct when processing body.
	(gimplify_expr): Handle OMP_LOOP.  For OMP_MASTER, OMP_TASKGROUP
	etc. temporarily set in_omp_construct when processing body.
	(gimplify_body): Create ORT_IMPLICIT_TARGET instead of ORT_TARGET.
	* omp-low.c (struct omp_context): Add loop_p.
	(build_outer_var_ref): Treat ctx->loop_p similarly to simd construct
	in that the original var might be private.
	(scan_sharing_clauses): Handle OMP_CLAUSE_BIND.
	(check_omp_nesting_restrictions): Adjust nesting restrictions for
	addition of loop construct.
	(scan_omp_1_stmt): Allow setjmp inside of loop construct.

	* omp-low.c (lower_rec_input_clauses): Don't force simd arrays for
	lastprivate non-addressable iterator of a collapse(1) simd.

2019-07-17  Bill Seurer  <seurer@linux.vnet.ibm.com>

	* config/rs6000/rs6000-call.c (HAVE_AS_GNU_ATTRIBUTE): define value
	as in rs6000.c.

2019-07-19  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin.h (DRIVER_SELF_SPECS): Ignore X and Mach specs which
	refer to default conditions.  Warn for the 'y' spec which is ignored
	by current linkers.

2019-07-19  Bill Seurer  <seurer@linux.vnet.ibm.com>

	* config/rs6000/rs6000.c (builtin_description, cpu_is_info,
	cpu_supports_info, builtin_hash_struct, builtin_hasher,
	builtin_hash_table, rs6000_builtin_info_type, rs6000_builtin_info,
	rs6000_aggregate_candidate, rs6000_discover_homogeneous_aggregate,
	rs6000_return_in_memory, rs6000_return_in_msb, call_ABI_of_interest,
	init_cumulative_args, rs6000_promote_function_mode,
	rs6000_must_pass_in_stack, is_complex_IBM_long_double,
	abi_v4_pass_in_fpr, rs6000_function_arg_padding,
	rs6000_function_arg_boundary, rs6000_parm_offset,
	rs6000_parm_start, rs6000_arg_size,
	rs6000_darwin64_record_arg_advance_flush,
	rs6000_darwin64_record_arg_advance_recurse,
	rs6000_darwin64_struct_check_p, rs6000_function_arg_advance_1,
	rs6000_function_arg_advance, rs6000_darwin64_record_arg_flush,
	rs6000_darwin64_record_arg_recurse, rs6000_darwin64_record_arg,
	rs6000_mixed_function_arg, rs6000_psave_function_arg,
	rs6000_finish_function_arg, rs6000_function_arg,
	rs6000_arg_partial_bytes, rs6000_pass_by_reference,
	rs6000_parm_needs_stack, rs6000_function_parms_need_stack,
	rs6000_reg_parm_stack_space, rs6000_move_block_from_reg,
	setup_incoming_varargs, rs6000_build_builtin_va_list, rs6000_va_start,
	rs6000_gimplify_va_arg, def_builtin, bdesc_3arg, bdesc_dst,
	bdesc_2arg, bdesc_altivec_preds, bdesc_abs, bdesc_1arg, bdesc_0arg,
	bdesc_htm, rs6000_overloaded_builtin_p, rs6000_overloaded_builtin_name,
	rs6000_expand_zeroop_builtin, rs6000_expand_mtfsf_builtin,
	rs6000_expand_mtfsb_builtin, rs6000_expand_set_fpscr_rn_builtin,
	rs6000_expand_set_fpscr_drn_builtin, rs6000_expand_unop_builtin,
	altivec_expand_abs_builtin, rs6000_expand_binop_builtin,
	altivec_expand_predicate_builtin, swap_endian_selector_for_mode,
	altivec_expand_lv_builtin, altivec_expand_stxvl_builtin,
	altivec_expand_stv_builtin, htm_spr_num, rs6000_htm_spr_icode,
	htm_expand_builtin, cpu_expand_builtin, rs6000_expand_ternop_builtin,
	altivec_expand_dst_builtin, altivec_expand_vec_init_builtin,
	get_element_number, altivec_expand_vec_set_builtin,
	altivec_expand_vec_ext_builtin, altivec_expand_builtin,
	rs6000_builtin_is_supported_p, rs6000_invalid_builtin,
	rs6000_fold_builtin, rs6000_builtin_valid_without_lhs,
	fold_build_vec_cmp, fold_compare_helper, fold_mergehl_helper,
	fold_mergeeo_helper, rs6000_gimple_fold_builtin,
	rs6000_expand_builtin, rs6000_vector_type,
	rs6000_init_builtins, rs6000_builtin_decl, altivec_init_builtins,
	htm_init_builtins, builtin_function_type, rs6000_common_init_builtins,
	rs6000_internal_arg_pointer, rs6000_output_mi_thunk): Move
	to rs6000-call.c.
	* config/rs6000/rs6000-call.c (builtin_description, cpu_is_info,
	cpu_supports_info, builtin_hash_struct, builtin_hasher,
	builtin_hash_table, rs6000_builtin_info_type, rs6000_builtin_info,
	rs6000_aggregate_candidate, rs6000_discover_homogeneous_aggregate,
	rs6000_return_in_memory, rs6000_return_in_msb, call_ABI_of_interest,
	init_cumulative_args, rs6000_promote_function_mode,
	rs6000_must_pass_in_stack, is_complex_IBM_long_double,
	abi_v4_pass_in_fpr, rs6000_function_arg_padding,
	rs6000_function_arg_boundary, rs6000_parm_offset,
	rs6000_parm_start, rs6000_arg_size,
	rs6000_darwin64_record_arg_advance_flush,
	rs6000_darwin64_record_arg_advance_recurse,
	rs6000_darwin64_struct_check_p, rs6000_function_arg_advance_1,
	rs6000_function_arg_advance, rs6000_darwin64_record_arg_flush,
	rs6000_darwin64_record_arg_recurse, rs6000_darwin64_record_arg,
	rs6000_mixed_function_arg, rs6000_psave_function_arg,
	rs6000_finish_function_arg, rs6000_function_arg,
	rs6000_arg_partial_bytes, rs6000_pass_by_reference,
	rs6000_parm_needs_stack, rs6000_function_parms_need_stack,
	rs6000_reg_parm_stack_space, rs6000_move_block_from_reg,
	setup_incoming_varargs, rs6000_build_builtin_va_list, rs6000_va_start,
	rs6000_gimplify_va_arg, def_builtin, bdesc_3arg, bdesc_dst,
	bdesc_2arg, bdesc_altivec_preds, bdesc_abs, bdesc_1arg, bdesc_0arg,
	bdesc_htm, rs6000_overloaded_builtin_p, rs6000_overloaded_builtin_name,
	rs6000_expand_zeroop_builtin, rs6000_expand_mtfsf_builtin,
	rs6000_expand_mtfsb_builtin, rs6000_expand_set_fpscr_rn_builtin,
	rs6000_expand_set_fpscr_drn_builtin, rs6000_expand_unop_builtin,
	altivec_expand_abs_builtin, rs6000_expand_binop_builtin,
	altivec_expand_predicate_builtin, swap_endian_selector_for_mode,
	altivec_expand_lv_builtin, altivec_expand_stxvl_builtin,
	altivec_expand_stv_builtin, htm_spr_num, rs6000_htm_spr_icode,
	htm_expand_builtin, cpu_expand_builtin, rs6000_expand_ternop_builtin,
	altivec_expand_dst_builtin, altivec_expand_vec_init_builtin,
	get_element_number, altivec_expand_vec_set_builtin,
	altivec_expand_vec_ext_builtin, altivec_expand_builtin,
	rs6000_builtin_is_supported_p, rs6000_invalid_builtin,
	rs6000_fold_builtin, rs6000_builtin_valid_without_lhs,
	fold_build_vec_cmp, fold_compare_helper, fold_mergehl_helper,
	fold_mergeeo_helper, rs6000_gimple_fold_builtin,
	rs6000_expand_builtin, rs6000_vector_type,
	rs6000_init_builtins, rs6000_builtin_decl, altivec_init_builtins,
	htm_init_builtins, builtin_function_type, rs6000_common_init_builtins,
	rs6000_internal_arg_pointer, rs6000_output_mi_thunk: Move
	to here from rs6000.c.
	* config/rs6000/rs6000-internal.h: (rs6000_darwin64_struct_check_p,
	rs6000_discover_homogeneous_aggregate, rs6000_output_mi_thunk,
	rs6000_output_addr_const_extra, rs6000_gimple_fold_builtin,
	rs6000_invalid_builtin, rs6000_build_builtin_va_list, rs6000_va_start,
	rs6000_gimplify_va_arg, rs6000_promote_function_mode,
	rs6000_return_in_memory, rs6000_return_in_msb,
	rs6000_pass_by_reference, setup_incoming_varargs,
	rs6000_function_arg_boundary, rs6000_must_pass_in_stack,
	rs6000_arg_partial_bytes, rs6000_function_arg_advance,
	rs6000_function_arg_padding, rs6000_function_arg,
	rs6000_darwin64_record_arg, rs6000_internal_arg_pointer,
	rs6000_init_builtins, rs6000_builtin_decl, rs6000_expand_builtin,
	rs6000_fold_builtin, rs6000_passes_ieee128, rs6000_passes_float,
	rs6000_passes_long_double, rs6000_passes_vector,
	rs6000_returns_struct, cpu_builtin_p, tree builtin_mode_to_type,
	altivec_builtin_mask_for_load) Add declarations.
	* config/rs6000/t-rs6000: Add new source file rs6000-call.c.
	* config/config.gcc: Add new source file rs6000-call.c to garbage
	collector and extra_objs.

2019-07-19  Jeff Law  <law@redhat.com>

	PR tree-optimization/86061
	* tree-ssa-dse.c (initialize_ao_ref_for_dse): Handle
	strncpy.  Drop some trivial dead code.
	(maybe_trim_memstar_call): Handle strncpy.

2019-07-19  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91211
	* tree-ssa-sccvn.c (vn_walk_cb_data::push_partial_def): Fix
	memset encoding size.

2019-07-19  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/91204
	* config/i386/mmx.md (one_cmpl<mode>2): New expander.

2019-07-19  Jan Hubicka  <hubicka@ucw.cz>

	PR ipa/91194
	* ipa-inline.c (recursive_inlining): Fix limits check.

2019-07-19  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91200
	* tree-ssa-phiopt.c (cond_store_replacement): Check we have
	no PHI nodes in middle-bb.

2019-07-19  Richard Sandiford  <richard.sandiford@arm.com>

	* doc/invoke.texi: Rename the AArch64 +bitperm extension flag
	to +sve-bitperm.
	* config/aarch64/aarch64-option-extensions.def: Likewise.

2019-07-19  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/91190
	* function.c (insert_temp_slot_address): Store into the hash table
	a copy of address to avoid RTL sharing issues.

2019-07-19  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91207
	Revert
	2019-07-17  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91178
	* tree-vect-stmts.c (get_group_load_store_type): For SLP
	loads with a gap larger than the vector size always use
	VMAT_STRIDED_SLP.
	(vectorizable_load): For VMAT_STRIDED_SLP with a permutation
	avoid loading vectors that are only contained in the gap
	and thus are not needed.

2019-07-18  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (*addqi_2_slp): Remove.
	(*<code>qi_2_slp): Ditto.

2019-07-18  Michael Meissner  <meissner@linux.ibm.com>

	* config/rs6000/predicates.md (prefixed_mem_operand): Call
	rs6000_prefixed_address_mode_p instead of rs6000_prefixed_address.
	* config/rs6000/rs6000-protos.h (rs6000_prefixed_address_mode_p):
	Rename function from rs6000_prefixed_address.
	* config/rs6000/aix.h (TARGET_HAS_TOC): Rename TARGET_TOC to
	TARGET_HAS_TOC.
	(TARGET_TOC): Likewise.
	(TARGET_NO_TOC): Delete here, define TARGET_NO_TOC_OR_PCREL in
	rs6000.h.
	* config/rs6000/darwin.h (TARGET_HAS_TOC): Rename TARGET_TOC to
	TARGET_HAS_TOC.
	(TARGET_TOC): Likewise.
	(TARGET_NO_TOC): Delete here, define TARGET_NO_TOC_OR_PCREL in
	rs6000.h.
	* config/rs6000/linux64.h (TARGET_HAS_TOC): Rename TARGET_TOC to
	TARGET_HAS_TOC.
	(TARGET_TOC): Likewise.
	* config/rs6000/rs6000.c (rs6000_option_override_internal): Add
	check to require -mcmodel=medium for pc-relative addressing.
	(create_TOC_reference): Add assertion for TARGET_TOC.
	(rs6000_legitimize_address): Use TARGET_NO_TOC_OR_PCREL instead of
	TARGET_NO_TOC.
	(rs6000_emit_move): Likewise.
	(TOC_alias_set): Rename TOC alias set static variable from 'set'
	to 'TOC_alias_set'.
	(get_TOC_alias_set): Likewise.
	(output_toc): Use TARGET_NO_TOC_OR_PCREL instead of
	TARGET_NO_TOC.
	(rs6000_can_eliminate): Likewise.
	(rs6000_prefixed_address_mode_p): Rename function from
	rs6000_prefixed_address.
	* config/rs6000/rs6000.h (TARGET_TOC): Define in terms of
	TARGET_HAS_TOC and not pc-relative.
	(TARGET_NO_TOC_OR_PCREL): New macro to replace TARGET_NO_TOC.
	* config/rs6000/sysv4.h (TARGET_HAS_TOC): Rename TARGET_TOC to
	TARGET_HAS_TOC.
	(TARGET_TOC): Likewise.
	(TARGET_NO_TOC): Delete here, define TARGET_NO_TOC_OR_PCREL in
	rs6000.h.

2019-07-18  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/91188
	* config/i386/i386.md (*addqi_1_slp): Use register_operand predicate
	for operand 0.  Do not use (match_dup) to match operand 1 with
	operand 0.  Add check in insn constraint that either input operand
	matches operand 0.  Use SWI12 mode iterator to also handle
	HImode operands.
	(*and<mode>_1_slp): Ditto.
	(*<code>qi_1_slp): Ditto.
	(*sub<mode>_1_slp): Use register_operand predicate for operand 0.
	Do not use (match_dup) to match operand 1 with operand 0.  Add
	check in insn constraint that operand 1 matches operand 0.
	Use SWI12 mode iterator to also handle HImode operands.
	(*ashl<mode>3_1_slp): Ditto.
	(*<shift_insn><mode>3_1_slp): Ditto.
	(*<rotate_insn><mode>3_1_slp): Ditto.

2019-07-18  Sylvia Taylor  <sylvia.taylor@arm.com>

	* config/arm/arm-builtins.c
	(arm_expand_ternop_builtin): Remove explicit sha1 builtin handling.
	(arm_expand_unop_builtin): Likewise.
	* config/arm/crypto.md
	(crypto_sha1h): Convert from define_insn to define_expand.
	(crypto_<crypto_pattern>): Likewise.
	(crypto_sha1h_lb): New define_insn.
	(crypto_<crypto_pattern>_lb): Likewise.

2019-07-18  Sylvia Taylor  <sylvia.taylor@arm.com>

	PR target/90317
	* config/arm/arm_neon.h (vsha1h_u32): Refactor.
	(vsha1cq_u32): Likewise.
	(vsha1pq_u32): Likewise.
	(vsha1mq_u32): Likewise.
	* config/arm/crypto.md (crypto_sha1h): Remove zero extend, correct
	vec select.
	(crypto_sha1c): Correct vec select.
	(crypto_sha1m): Likewise.
	(crypto_sha1p): Likewise.

2019-07-18  Richard Earnshaw  <rearnsha@arm.com>

	* config/arm/predicates.md (arm_borrow_operation): New predicate.
	* config/arm/arm.c (subdi3_compare1): Use CCmode for the split.
	(arm_subdi3, subdi_di_zesidi, subdi_di_sesidi): Likewise.
	(subdi_zesidi_zesidi): Likewise.
	(negdi2_compare, negdi2_insn): Likewise.
	(negdi_extensidi): Likewise.
	(negdi_zero_extendsidi): Likewise.
	(arm_cmpdi_insn): Likewise.
	(subsi3_carryin): Use arm_borrow_operation.
	(subsi3_carryin_const): Likewise.
	(subsi3_carryin_const0): Likewise.
	(subsi3_carryin_compare): Likewise.
	(subsi3_carryin_compare_const): Likewise.
	(subsi3_carryin_compare_const0): Likewise.
	(subsi3_carryin_shift): Likewise.
	(rsbsi3_carryin_shift): Likewise.
	(negsi2_carryin_compare): Likewise.

2019-07-18  Bin Cheng  <bin.cheng@linux.alibaba.com>

	PR tree-optimization/91137
	* tree-ssa-loop-ivopts.c (struct ivopts_data): New field.
	(tree_ssa_iv_optimize_init, alloc_iv, tree_ssa_iv_optimize_finalize):
	Init, use and fini the above new field.
	(determine_base_object_1): New function.
	(determine_base_object): Reimplement using walk_tree.

2019-07-18  Richard Sandiford  <richard.sandiford@arm.com>

	* basic-block.h (CLEANUP_FORCE_FAST_DCE): New macro.
	* cfgcleanup.c (cleanup_cfg): Call run_fast_dce if
	CLEANUP_FORCE_FAST_DCE is set.
	* ifcvt.c (rest_of_handle_if_conversion): Pass
	CLEANUP_FORCE_FAST_DCE to the final cleanup_cfg call if
	if-conversion succeeded.

2019-07-18  Richard Biener  <rguenther@suse.de>

	* tree-ssa-sccvn.c (vn_walk_cb_data::push_partial_def): Refactor
	branches to make code less indented.

2019-07-17  Alexandre Oliva  <oliva@adacore.com>

	PR middle-end/81824
	* attribs.c (decls_mismatched_attributes): Simplify the logic
	that avoids duplicates and false positives.

2019-07-17  John David Anglin  <danglin@gcc.gnu.org>

	* config/pa/pa.c (pa_som_asm_init_sections): Don't force all constant
	data into data section when generating PIC code.
	(pa_select_section): Use pa_reloc_rw_mask() to qualify relocs.
	(pa_reloc_rw_mask): Return 3 when generating PIC code and when
	generating code for SOM targets earlier than HP-UX 11.  Otherwise,
	return 2 for SOM and 0 for other targets.

2019-07-17  Jeff Law  <law@redhat.com>

	* tree-ssa-dse.c (initialize_ao_ref_for_dse): Fix formatting.
	(dse_walker::dse_optimize_stmt): Likewise.  Add missing return to
	avoid unexpected switch statement fallthru.

2019-07-17  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (*add<dwi>3_doubleword):
	Remove redundant constraints.
	(*add<mode>_1): Ditto.
	(*addhi_1): Ditto.
	(*addqi_1): Ditto.
	(*addqi_1_slp): Ditto.
	(*add<mode>_2): Ditto.
	(*addv<mode>4): Ditto.
	(*sub<dwi>3_doubleword): Ditto.
	(*sub<mode>_1): Ditto.
	(*subqi_1_slp): Ditto.
	(*sub<mode>_2): Ditto.
	(*subv<mode>4): Ditto.
	(*sub<mode>_3): Ditto.
	(@add<mode>3_carry): Ditto.
	(@sub<mode>3_carry): Ditto.
	(*add<mode>3_cc_overflow_1): Ditto.
	(*add<mode>3_zext_cc_overflow_2): Ditto.
	(*anddi_1): Ditto.
	(*and<mode>_1): Ditto.
	(*andqi_1): Ditto.
	(*andqi_1_slp): Ditto.
	(*anddi_2): Ditto.
	(*andqi_2_maybe_si): Ditto.
	(*and<mode>_2): Ditto.
	(*andqi_2_slp): Ditto.
	(*<code><mode>_1): Ditto.
	(*<code>qi_1): Ditto.
	(*<code>qi_1_slp): Ditto.
	(*<code><mode>_2): Ditto.
	(*<code>qi_2_slp): Ditto.

2019-07-17  Jan Hubicka  <hubicka@ucw.cz>

	* alias.c (record_component_aliases): Do not simplify pointed-to
	types of ODR types.

2019-07-17  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (*andqi_2_maybe_si): Handle potential
	partial reg stall on alternative 2.

2019-07-17  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91178
	* tree-ssa.c (release_defs_bitset): Iterate from higher to
	lower SSA names to avoid quadratic behavior in the common case.
	* tree-data-ref.c (split_constant_offset): Add limit argument
	and pass it down.  Initialize it from PARAM_SSA_NAME_DEF_CHAIN_LIMIT.
	(split_constant_offset_1): Add limit argument and use it to
	limit SSA def walking.  Optimize the common plus/minus case.

2019-07-17  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91178
	* tree-vect-stmts.c (get_group_load_store_type): For SLP
	loads with a gap larger than the vector size always use
	VMAT_STRIDED_SLP.
	(vectorizable_load): For VMAT_STRIDED_SLP with a permutation
	avoid loading vectors that are only contained in the gap
	and thus are not needed.

2019-07-17  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91180
	* tree-ssa-sccvn.c (vn_reference_lookup_3): Fix offset
	computation for memset partial defs.

2019-07-17  Jakub Jelinek  <jakub@redhat.com>

	* gimple.h (enum gf_mask): Remove GF_OMP_FOR_SIMD, change
	GF_OMP_FOR_KIND_SIMD to a value serially after other kinds,
	divide GF_OMP_FOR_KIND_MASK, GF_OMP_FOR_COMBINED,
	GF_OMP_FOR_COMBINED_INTO, GF_OMP_FOR_GRID_PHONY,
	GF_OMP_FOR_GRID_INTRA_GROUP and GF_OMP_FOR_GRID_GROUP_ITER by two.
	* omp-grid.c (grid_process_grid_body,
	grid_eliminate_combined_simd_part): Use GF_OMP_FOR_KIND_SIMD instead
	of GF_OMP_FOR_SIMD, don't test & GF_OMP_FOR_SIMD but
	== GF_OMP_FOR_KIND_SIMD.
	* omp-low.c (build_outer_var_ref, scan_sharing_clauses,
	check_omp_nesting_restrictions, scan_omp_1_stmt,
	lower_rec_input_clauses, lower_lastprivate_conditional_clauses,
	lower_lastprivate_clauses, lower_reduction_clauses, lower_omp_scan,
	omp_find_scan): Likewise.
	* omp-expand.c (expand_omp_for): Likewise.
	* omp-general.c (omp_extract_for_data): Likewise.

	PR tree-optimization/91157
	* tree-vect-generic.c (expand_vector_comparison): Handle lhs being
	a vector boolean with scalar mode.
	(expand_vector_condition): Handle first operand being a vector boolean
	with scalar mode.
	(expand_vector_operations_1): For comparisons, don't bail out early
	if the return type is vector boolean with scalar mode, but comparison
	operand type is not.

2019-07-17  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91181
	* tree-vect-slp.c (vect_build_slp_tree_1): Do not compare
	IFN_LOADs as calls.

2019-07-16  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (*testdi_1): Match CCZmode for
	constants that might have the SImode sign bit set.
	(*testqi_1_maybe_si): Remove "!" constraint modifier.
	Use correct constraints for pentium pairing.
	(*test<mode>_1): Ditto.

2019-07-16  Jeff Law  <law@redhat.com>

	PR rtl-optimization/91173
	* tree-ssa-address.c (addr_for_mem_ref): If the base is an
	SSA_NAME with a constant value, fold its value into the offset
	and clear the base before calling gen_addr_rtx.

2019-07-16  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/91164
	* dse.c (rest_of_handle_dse): If dead edges have been purged,
	invalidate dominance info.

2019-07-16  Richard Sandiford  <richard.sandiford@arm.com>

	* read-md.h (md_reader::record_potential_iterator_use): Add a
	file_location parameter.
	* read-rtl.c (attribute_use::loc): New field.
	(map_attr_string): Take a file_location parameter.  Report cases
	in which attributes map to multiple distinct values.
	(apply_attribute_uses): Update call accordingly.
	(md_reader::handle_overloaded_name): Likewise.
	(md_reader::apply_iterator_to_string): Likewise.  Skip empty
	nonnull strings.
	(record_attribute_use): Take a file_location parameter.
	Initialize attribute_use::loc.
	(md_reader::record_potential_iterator_use): Take a file_location
	parameter.  Update call to record_attribute_use.
	(rtx_reader::rtx_alloc_for_name): Update call accordingly.
	(rtx_reader::read_rtx_code): Likewise.
	(rtx_reader::read_rtx_operand): Likewise.  Record a location
	for implicitly-expanded empty strings.

2019-07-16  Richard Sandiford  <richard.sandiford@arm.com>

	* read-md.h (md_reader::ptr_loc): Moved from read-md.c.
	Use file_location instead of separate fields.
	(md_reader::set_md_ptr_loc): Take a file_location instead of a
	separate filename and line number.
	* read-md.c (ptr_loc): As above.
	(md_reader::copy_md_ptr_loc): Update for new ptr_loc layout.
	(md_reader::fprint_md_ptr_loc): Likewise.
	(md_reader::set_md_ptr_loc): Likewise.  Take a file_location
	instead of a separate filename and line number.
	(md_reader::read_string): Update call accordingly.

2019-07-16  Richard Sandiford  <richard.sandiford@arm.com>

	* config/rs6000/rs6000.md (*mov<mode>_update1): Explicitly
	use <SFDF:mode>, <SFDF:MODE>, <SFDF:Ff> and <SFDF:bits> rather than
	leaving the choice between SFDF and P implicit.
	(*mov<mode>_update2): Likewise.
	(*cmp<IBM128:mode>_internal2): Explicitly use <IBM128:MODE>
	rather than leaving the choice betweem IBM128 and GPR implicit.
	(*fix<uns>_trunc<IEEE128:mode><QHSI:mode>2_mem): Explicitly use
	<IEEE128:MODE> rather than leaving the choice between IEEE128 and
	QHSI implicit.
	(AltiVec define_peephole2s): Explicitly use <ALTIVEC_DFORM:MODE>
	rather than leaving the choice between ALTIVEC_DFORM and P implicit.
	* config/rs6000/vsx.md
	(*vsx_ext_<VSX_EXTRACT_I:VS_scalar>_fl_<FL_CONV:mode>)
	(*vsx_ext_<VSX_EXTRACT_I:VS_scalar>_ufl_<FL_CONV:mode>): Explicitly
	use <FL_CONV:VSisa> rather than leaving the choice between FL_CONV
	and VSX_EXTRACT_I implicit.

2019-07-16  Richard Sandiford  <richard.sandiford@arm.com>

	* config/mips/micromips.md (*movep<MOVEP1:mode><MOVEP2:mode>):
	Explicitly use <MOVEP1:MODE> for the mode attribute.

2019-07-16  Jan Hubicka  <hubicka@ucw.cz>

	PR bootstrap/91176
	* ipa-fnsummary.c (analyze_function_body): Skip debug stmts

2019-07-15  Segher Boessenkool  <segher@kernel.crashing.org>

	PR target/91050
	* config/rs6000/rs6000.c (rs6000_file_start): Never skip emitting a
	.machine directive.

2019-07-15  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (@test<mode>_ccno_1):
	Rename from test<mode>_ccno_1.
	(*testdi_1): Remove redundant alternatives.  Remove modrm attribute.
	(*testqi_1_maybe_si): Remove modrm attribute.
	(*test<mode>_1): Ditto.
	* config/i386/i386-expand.c (ix86_split_idivmod): Use
	gen_test_ccno_1 and gen_extend_insn.

2019-07-15  Jan Hubicka  <hubicka@ucw.cz>

	* tree-ssa-alias.c (aliasing_component_refs_walk): Initialize same_p
	to 0.

2019-07-15  Richard Biener  <rguenther@suse.de>

	PR middle-end/91162
	* tree-cfg.c (move_block_to_fn): When releasing a virtual PHI
	node make sure to replace all uses with something valid.

2019-07-15  Kewen Lin  <linkw@gcc.gnu.org>

	PR tree-optimization/88497
	* tree-ssa-reassoc.c (reassociate_bb): Swap the positions of
	GIMPLE_BINARY_RHS check and gimple_visited_p check, call new
	function undistribute_bitref_for_vector.
	(undistribute_bitref_for_vector): New function.
	(cleanup_vinfo_map): Likewise.
	(sort_by_mach_mode): Likewise.

2019-07-14  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (nonmemory_szext_operand): New mode attribute.
	(test<mode>_ccno_1): Macroize insn pattern from testsi_ccno_1
	and testdi_ccno_1 using SWI48 mode attribute.
	(*testdi_1): Use x86_64_szext_nonmemory_operand instead of
	x86_64_szext_general_operand.
	(*testqi_1_maybe_si): Use nonmemory_operand instead of general_operand.
	(*test<mode>_1): Use nonmemory_szext_operand mode attribute
	instead of genera_operand mode attribute.

2019-07-14  Vladislav Ivanishin  <vlad@ispras.ru>

	* gdbhooks.py (DumpFn.invoke): Add explicit casts of return values of
	fopen and fclose to their respective types.
	(DotFn.invoke): Ditto.

2019-07-14  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-fnsummary.c (ipa_dump_hints): Do not dump array_index.
	(ipa_fn_summary::~ipa_fn_summary): Do not destroy array_index.
	(ipa_fn_summary_t::duplicate): Do not duplicate array_index.
	(array_index_predicate): Remove.
	(analyze_function_body): Account cost for variable ofsetted array
	indexing.
	(estimate_node_size_and_time): Do not compute array index hint.
	(ipa_merge_fn_summary_after_inlining): Do not merge array index hint.
	(inline_read_section): Do not read array index hint.
	(ipa_fn_summary_write): Do not write array index hint.
	* doc/invoke.texi (ipa-cp-array-index-hint-bonus): Remove.
	* ipa-cp.c (hint_time_bonus): Remove.
	* ipa-fnsummary.h (ipa_hints_vals): Remove array_index.
	(ipa_fnsummary): Remove array_index.
	* ipa-inline.c (want_inline_small_function_p): Do not use
	array_index.
	(edge_badness): Likewise.
	* params.def (PARAM_IPA_CP_ARRAY_INDEX_HINT_BONUS): Remove.

2019-07-14  Segher Boessenkool  <segher@kernel.crashing.org>

	PR target/91148
	* config/rs6000/rs6000-c.c (altivec_resolve_overloaded_builtin): Remove
	superfluous "builtin function" phrasing.

2019-07-13  Jan Hubicka  <hubicka@ucw.cz>

	* tree-ssa-alias.c (component_ref_to_zero_sized_trailing_array_p):
	Break out from ...
	(aliasing_component_refs_walk): Break out from ...
	(aliasing_component_refs_p): ... here.

2019-07-13  Segher Boessenkool  <segher@kernel.crashing.org>

	PR target/91148
	* config/rs6000/rs6000.c (rs6000_invalid_builtin): Remove superfluous
	"builtin function" phrasing.

2019-07-13  Prathamesh Kulkarni  <prathamesh.kulkarni@linaro.org>

	PR target/90723
	* recog.h (temporary_volatile_ok): New class.
	* config/aarch64/aarch64.c (aarch64_emit_sve_pred_move): Set
	volatile_ok temporarily to true using temporary_volatile_ok.
	* expr.c (emit_block_move_via_cpymem): Likewise.
	* optabs.c (maybe_legitimize_operand): Likewise.

2019-07-13  Jakub Jelinek  <jakub@redhat.com>

	* gimplify.c (struct gimplify_omp_ctx): Add order_concurrent member.
	(omp_notice_threadprivate_variable): Diagnose threadprivate variable
	uses inside of order(concurrent) constructs.
	(gimplify_scan_omp_clauses): Set ctx->order_concurrent if
	OMP_CLAUSE_ORDER is seen.
	* omp-low.c (struct omp_context): Add order_concurrent member.
	(scan_sharing_clauses): Set ctx->order_concurrent if
	OMP_CLAUSE_ORDER is seen.
	(check_omp_nesting_restrictions): Diagnose ordered or atomic inside
	of simd order(concurrent).  Diagnose constructs not allowed inside of
	for order(concurrent).
	(setjmp_or_longjmp_p): Add a context and TREE_PUBLIC check to avoid
	complaining about static double setjmp (double); or class static
	methods or non-global namespace setjmps.
	(omp_runtime_api_call): New function.
	(scan_omp_1_stmt): Diagnose OpenMP runtime API calls inside of
	order(concurrent) loops.

2019-07-12  Martin Sebor  <msebor@redhat.com>

	* doc/invoke.texi (ssa-name-def-chain-limit): Document new --param.
	* params.def (PARAM_SSA_NAME_DEF_CHAIN_LIMIT): Add new --param.
	* tree-vrp.c (vrp_prop::check_mem_ref): Use
	PARAM_SSA_NAME_DEF_CHAIN_LIMIT.

2019-07-12  Jan Hubicka  <jh@suse.cz>

	* tree-ssa-alias.c (same_tmr_indexing_p): Break out from ...
	(indirect_refs_may_alias_p): ... here.
	(nonoverlapping_component_refs_since_match_p): Support also non-trivial
	mem refs in the access paths.

2019-07-12  Jiangning Liu  <jiangning.liu@amperecomputing.com>

	PR tree-optimization/89430
	* tree-ssa-phiopt.c (cond_store_replacement): Support conditional
	store elimination for local variable without address escape.

2019-07-12  Jeff Law  <law@redhat.com>

	* config/c6x/c6x.c (c6x_section_type): Clear SECTION_NOTYPE
	for the ".far" section.

2019-07-12  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91145
	* tree-vect-slp.c (vect_build_slp_tree_2): Fix reduction
	chain check.

2019-07-12  Alexandre Oliva  <oliva@adacore.com>

	* tree-eh.c (honor_protect_cleanup_actions): Use outer_
	rather than this_state as the lowering context for the ELSE
	seq in a GIMPLE_EH_ELSE.

2019-07-12  Richard Sandiford  <richard.sandiford@arm.com>

	* vector-builder.h (vector_builder::elt): Allow already-supplied
	elements to be read back before building is complete.

2019-07-12  Eric Botcazou  <ebotcazou@adacore.com>

	PR rtl-optimization/91136
	* df-core.c (ACCESSING REFS): Fix typos in comment.
	* resource.c (mark_target_live_reg): Add artificial defs that occur at
	the beginning of the block to the initial set of live registers.

2019-07-12  Richard Biener  <rguenther@suse.de>

	* fold-const.h (get_array_ctor_element_at_index): Adjust.
	* fold-const.c (get_array_ctor_element_at_index): Add
	ctor_idx output parameter informing the caller where in
	the constructor the element was (not) found.  Add early exit
	for when the ctor is sorted.
	* gimple-fold.c (fold_array_ctor_reference): Support constant
	folding across multiple array elements.

2019-07-12  Eric Botcazou  <ebotcazou@adacore.com>

	* cfgexpand.c (expand_gimple_stmt_1) <GIMPLE_RETURN>: If the statement
	doesn't have location, set the current location to the function's end.

2019-07-12  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64.md (*compare_condjump<mode>)
	(loadwb_pair<GPI:mode>_<P:mode>, loadwb_pair<GPF:mode>_<P:mode>)
	(storewb_pair<GPI:mode>_<P:mode>, storewb_pair<GPF:mode>_<P:mode>)
	(*ands<mode>_compare0): Fix ambiguous uses of .md attributes.
	* config/aarch64/aarch64-simd.md
	(*aarch64_get_lane_extend<GPI:mode><VDQQH:mode>): Likewise.
	(*aarch64_get_lane_zero_extend<GPI:mode><VDQQH:mode>): Likewise.
	* config/aarch64/aarch64-sve.md
	(while_ult<GPI:mode><PRED_ALL:mode>): Likewise.
	(*cond_<optab><mode>_any): Fix SVE_I/SVE_SDI typo.

2019-07-12  Richard Sandiford  <richard.sandiford@arm.com>

	* doc/md.texi: Document that @ patterns can have different
	numbers of operands.
	* genemit.c (handle_overloaded_gen): Handle this case.
	* genopinit.c (handle_overloaded_gen): Likewise.
	* gensupport.c (replace_operands_with_dups): Iterate over
	the new rtx's format rather than the old one's.

2019-07-12  Jakub Jelinek  <jakub@redhat.com>

	* tree-core.h (enum omp_clause_code): Add OMP_CLAUSE_ORDER.
	* tree.c (omp_clause_num_ops, omp_clause_code_name): Add
	order clause entries.
	(walk_tree_1): Handle OMP_CLAUSE_ORDER.
	* tree-pretty-print.c (dump_omp_clause): Likewise.
	* gimplify.c (gimplify_scan_omp_clauses, gimplify_adjust_omp_clauses):
	Likewise.
	* omp-low.c (scan_sharing_clauses): Likewise.
	* tree-nested.c (convert_nonlocal_omp_clauses,
	convert_local_omp_clauses): Likewise.

2019-07-12  Kewen Lin  <linkw@gcc.gnu.org>

	* cfgrtl.c (print_rtl_with_bb): Emit a hint if the
	fallthrough target of current basic block isn't the placed
	right next.

2019-07-11  Sunil K Pandey  <sunil.k.pandey@intel.com>

	PR target/90980
	* config/i386/avx512fintrin.h (_mm512_loadu_epi64): New.
	(_mm512_storeu_epi64): Likewise.
	(_mm512_loadu_epi32): Likewise.
	(_mm512_storeu_epi32): Likewise.
	* config/i386/avx512vlintrin.h (_mm256_storeu_epi64): New.
	(_mm_storeu_epi64): Likewise.
	(_mm256_storeu_epi32): Likewise.
	(_mm_storeu_epi32): Likewise.

2019-07-11  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000-logue.c: Add Modula-2 to comment.

2019-07-11  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000-logue.c (rs6000_output_function_epilogue):
	Handle Modula-2.

2019-07-11  Jakub Jelinek  <jakub@redhat.com>

	PR target/91124
	* config/i386/sse.md (sse2_cvtpd2dq<mask_name>): Change into ...
	(sse2_cvtpd2dq): ... this.  Remove mask substitution macros.
	(sse2_cvtpd2dq_mask, sse2_cvtpd2dq_mask_1): New define_insns.
	(ufix_notruncv2dfv2si2<mask_name>): Change into ...
	(ufix_notruncv2dfv2si2): ... this.  Remove mask substitution macros.
	(ufix_notruncv2dfv2si2_mask, ufix_notruncv2dfv2si2_mask_1): New
	define_insns.
	(ufix_truncv2dfv2si2<mask_name>): Change into ...
	(ufix_truncv2dfv2si2): ... this.  Remove mask substitution macros.
	(ufix_truncv2dfv2si2_mask, ufix_truncv2dfv2si2_mask_1): New
	define_insns.
	(sse2_cvttpd2dq<mask_name>): Change into ...
	(sse2_cvttpd2dq): ... this.  Remove mask substitution macros.
	(sse2_cvttpd2dq_mask, sse2_cvttpd2dq_mask_1): New define_insns.
	(*sse2_cvtpd2dq<mask_name>): Change into ...
	(*sse2_cvtpd2dq): ... this.  Remove mask substitution macros.
	Add "C" constraint to const0_operand.
	(*sse2_cvtpd2dq_mask, *sse2_cvtpd2dq_mask_1): New define_insns.
	(sse2_cvtpd2ps_mask): Adjust expand to match *sse2_cvtpd2ps_mask
	changes.

	PR target/91124
	* config/i386/i386-builtin-types.def
	(V32HI_FTYPE_V32HI_V32HI_V32HI_INT,
	V16HI_FTYPE_V16HI_V16HI_V16HI_INT, V8HI_FTYPE_V8HI_V8HI_V8HI_INT,
	V8SI_FTYPE_V8SI_V8SI_V8SI_INT, V4DI_FTYPE_V4DI_V4DI_V4DI_INT,
	V8DI_FTYPE_V8DI_V8DI_V8DI_INT, V16SI_FTYPE_V16SI_V16SI_V16SI_INT,
	V2DI_FTYPE_V2DI_V2DI_V2DI_INT, V4SI_FTYPE_V4SI_V4SI_V4SI_INT): Remove.
	* config/i386/i386-builtin.def (__builtin_ia32_vpshrdv_v32hi_mask,
	__builtin_ia32_vpshrdv_v32hi_maskz, __builtin_ia32_vpshrdv_v16hi_mask,
	__builtin_ia32_vpshrdv_v16hi_maskz, __builtin_ia32_vpshrdv_v8hi_mask,
	__builtin_ia32_vpshrdv_v8hi_maskz, __builtin_ia32_vpshrdv_v16si_mask,
	__builtin_ia32_vpshrdv_v16si_maskz, __builtin_ia32_vpshrdv_v8si_mask,
	__builtin_ia32_vpshrdv_v8si_maskz, __builtin_ia32_vpshrdv_v4si_mask,
	__builtin_ia32_vpshrdv_v4si_maskz, __builtin_ia32_vpshrdv_v8di_mask,
	__builtin_ia32_vpshrdv_v8di_maskz, __builtin_ia32_vpshrdv_v4di_mask,
	__builtin_ia32_vpshrdv_v4di_maskz, __builtin_ia32_vpshrdv_v2di_mask,
	__builtin_ia32_vpshrdv_v2di_maskz, __builtin_ia32_vpshldv_v32hi_mask,
	__builtin_ia32_vpshldv_v32hi_maskz, __builtin_ia32_vpshldv_v16hi_mask,
	__builtin_ia32_vpshldv_v16hi_maskz, __builtin_ia32_vpshldv_v8hi_mask,
	__builtin_ia32_vpshldv_v8hi_maskz, __builtin_ia32_vpshldv_v16si_mask,
	__builtin_ia32_vpshldv_v16si_maskz, __builtin_ia32_vpshldv_v8si_mask,
	__builtin_ia32_vpshldv_v8si_maskz, __builtin_ia32_vpshldv_v4si_mask,
	__builtin_ia32_vpshldv_v4si_maskz, __builtin_ia32_vpshldv_v8di_mask,
	__builtin_ia32_vpshldv_v8di_maskz, __builtin_ia32_vpshldv_v4di_mask,
	__builtin_ia32_vpshldv_v4di_maskz, __builtin_ia32_vpshldv_v2di_mask,
	__builtin_ia32_vpshldv_v2di_maskz, __builtin_ia32_vpdpbusd_v16si_mask,
	__builtin_ia32_vpdpbusd_v16si_maskz, __builtin_ia32_vpdpbusd_v8si_mask,
	__builtin_ia32_vpdpbusd_v8si_maskz, __builtin_ia32_vpdpbusd_v4si_mask,
	__builtin_ia32_vpdpbusd_v4si_maskz,
	__builtin_ia32_vpdpbusds_v16si_mask,
	__builtin_ia32_vpdpbusds_v16si_maskz,
	__builtin_ia32_vpdpbusds_v8si_mask,
	__builtin_ia32_vpdpbusds_v8si_maskz,
	__builtin_ia32_vpdpbusds_v4si_mask,
	__builtin_ia32_vpdpbusds_v4si_maskz,
	__builtin_ia32_vpdpwssd_v16si_mask,
	__builtin_ia32_vpdpwssd_v16si_maskz, __builtin_ia32_vpdpwssd_v8si_mask,
	__builtin_ia32_vpdpwssd_v8si_maskz, __builtin_ia32_vpdpwssd_v4si_mask,
	__builtin_ia32_vpdpwssd_v4si_maskz,
	__builtin_ia32_vpdpwssds_v16si_mask,
	__builtin_ia32_vpdpwssds_v16si_maskz,
	__builtin_ia32_vpdpwssds_v8si_mask,
	__builtin_ia32_vpdpwssds_v8si_maskz,
	__builtin_ia32_vpdpwssds_v4si_mask,
	__builtin_ia32_vpdpwssds_v4si_maskz): Use *_USI, *_UHI or *_UQI
	suffixed types rather than *_INT.
	* config/i386/i386-expand.c (ix86_expand_args_builtin): Don't handle
	V32HI_FTYPE_V32HI_V32HI_V32HI_INT, V16HI_FTYPE_V16HI_V16HI_V16HI_INT,
	V8HI_FTYPE_V8HI_V8HI_V8HI_INT, V8SI_FTYPE_V8SI_V8SI_V8SI_INT,
	V4DI_FTYPE_V4DI_V4DI_V4DI_INT, V8DI_FTYPE_V8DI_V8DI_V8DI_INT,
	V16SI_FTYPE_V16SI_V16SI_V16SI_INT, V2DI_FTYPE_V2DI_V2DI_V2DI_INT
	and V4SI_FTYPE_V4SI_V4SI_V4SI_INT.

2019-07-11  Aldy Hernandez  <aldyh@redhat.com>

	* tree-vrp.c (intersect_ranges): If we know the intersection is
	empty, there is no need to conservatively add anything else to
	the set.

2019-07-11  Richard Biener  <rguenther@suse.de>

	PR middle-end/91131
	* gimplify.c (gimplify_compound_literal_expr): Force a temporary
	when the object is volatile and we have not cleared it even though
	there are no nonzero elements.

2019-07-10  Michael Meissner  <meissner@linux.ibm.com>

	* config/rs6000/predicates.md (cint34_operand): Update
	SIGNED_34BIT_OFFSET_P call.
	(pcrel_address): Update SIGNED_34BIT_OFFSET_P call.
	(pcrel_external_address): Update SIGNED_34BIT_OFFSET_P call.
	* config/rs6000/rs6000.c (rs6000_prefixed_address): Update
	SIGNED_16BIT_OFFSET_P and SIGNED_34BIT_OFFSET_P calls.
	* config/rs6000/rs6000.h (SIGNED_16BIT_OFFSET_P): Remove EXTRA
	argument.
	(SIGNED_34BIT_OFFSET_P): Remove EXTRA argument.
	(SIGNED_16BIT_OFFSET_EXTRA_P): New macro, like
	SIGNED_16BIT_OFFSET_P with an EXTRA argument.
	(SIGNED_34BIT_OFFSET_EXTRA_P): New macro, like
	SIGNED_34BIT_OFFSET_P with an EXTRA argument.

2019-07-10  Iain Sandoe  <iain@sandoe.co.uk>

	* config/rs6000/darwin.h (LIB_SPEC): Collate this spec here.
	* config/rs6000/darwin7.h (LIB_SPEC): Remove.
	* config/rs6000/darwin8.h (LIB_SPEC): Remove.
	(DEF_MIN_OSX_VERSION): New.

2019-07-10  Richard Sandiford  <richard.sandiford@arm.com>

	* fold-const.c (fold_relational_const): Fix folding of
	vector-to-scalar NE_EXPRs.
	(test_vector_folding): Add more tests.

2019-07-10  Richard Sandiford  <richard.sandiford@arm.com>

	PR target/91060
	* config/arm/iterators.md (V2DI_ONLY): New mode iterator.
	* config/arm/neon.md (vec_set<mode>_internal): Add a '@' prefix.
	(vec_setv2di_internal): Reexpress as...
	(@vec_set<V2DI_ONLY:mode>_internal): ...this.
	* config/arm/arm.c (neon_expand_vector_init): Use gen_vec_set_internal
	rather than gen_neon_vset_lane<mode>.

2019-07-10  Vladimir Makarov  <vmakarov@redhat.com>

	PR target/91102
	* lra-constraints.c (process_alt_operands): Don't match user
	defined regs only if they are early clobbers.

2019-07-10  Marc Glisse  <marc.glisse@inria.fr>

	* wide-int.h (wi::lshift): Reject negative values for the fast path.

2019-07-10  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91126
	* tree-ssa-sccvn.c (n_walk_cb_data::push_partial_def): Adjust
	native encoding offset for BYTES_BIG_ENDIAN.
	(vn_reference_lookup_3): Likewise.

2019-07-10  Richard Biener  <rguenther@suse.de>

	* tree-ssa-sccvn.c (vn_reference_lookup_3): Look at valueized
	LHS whenever possible.

2019-07-09  Jan Hubicka  <hubicka@ucw.cz>

	* tree-ssa-alias.c (nonoverlapping_component_refs_p_1): Break out
	from ...; work also on duplicated types.
	(nonoverlapping_component_refs_since_match): ... here
	(ncr_type_uid): Break out from ...
	(ncr_compar): ... here; look for TYPE_UID of canonical type if
	available.
	(nonoverlapping_component_refs_p): Use same_type_for_tbaa to match
	the types and nonoverlapping_component_refs_p_1 to disambiguate.

2019-07-09  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/90989
	* tree-ssa-strlen.c (handle_char_store): Constrain a single character
	optimization to just single character stores.

2019-07-09  Joern Rennecke  <joern.rennecke@riscy-ip.com>

	* tree-vect-stmts.c (vectorizable_comparison) <!slp_node>:
	Swap operands only once.

2019-07-09  Dragan Mladjenovic  <dmladjenovic@wavecomp.com>

	* cfgcleanup.c (old_insns_match_p): Check if used hard regs set is equal
	for both call instructions.

2019-07-09  John Darrington  <john@darrington.wattle.id.au>

	* simplify-rtx.c (simplify_unary_operation_1): Use GET_MODE_PRECISION
	rather than GET_MODE_BITSIZE to better handle partial integer modes.

2019-07-09  Michael Meissner  <meissner@linux.ibm.com>

	* config/rs6000/rs6000-internal.h (create_TOC_reference): Delete.
	* config/rs6000/rs6000-logue.c (create_TOC_reference): Move
	function from rs6000-logue.c back to rs6000.c.
	* config/rs6000/rs6000.c (create_TOC_reference): Likewise.

2019-07-09  Martin Sebor  <msebor@redhat.com>

	PR c++/61339
	* auto-profile.c: Change class-key of PODs to struct and others
	to class.
	* basic-block.h: Same.
	* bitmap.c (bitmap_alloc): Same.
	* bitmap.h: Same.
	* builtins.c (expand_builtin_prefetch): Same.
	(expand_builtin_interclass_mathfn): Same.
	(expand_builtin_strlen): Same.
	(expand_builtin_mempcpy_args): Same.
	(expand_cmpstr): Same.
	(expand_builtin___clear_cache): Same.
	(expand_ifn_atomic_bit_test_and): Same.
	(expand_builtin_thread_pointer): Same.
	(expand_builtin_set_thread_pointer): Same.
	* caller-save.c (setup_save_areas): Same.
	(replace_reg_with_saved_mem): Same.
	(insert_restore): Same.
	(insert_save): Same.
	(add_used_regs): Same.
	* cfg.c (get_bb_copy): Same.
	(set_loop_copy): Same.
	* cfg.h: Same.
	* cfganal.h: Same.
	* cfgexpand.c (alloc_stack_frame_space): Same.
	(add_stack_var): Same.
	(add_stack_var_conflict): Same.
	(add_scope_conflicts_1): Same.
	(update_alias_info_with_stack_vars): Same.
	(expand_used_vars): Same.
	* cfghooks.c (redirect_edge_and_branch_force): Same.
	(delete_basic_block): Same.
	(split_edge): Same.
	(make_forwarder_block): Same.
	(force_nonfallthru): Same.
	(duplicate_block): Same.
	(lv_flush_pending_stmts): Same.
	* cfghooks.h: Same.
	* cfgloop.c (flow_loops_cfg_dump): Same.
	(flow_loop_nested_p): Same.
	(superloop_at_depth): Same.
	(get_loop_latch_edges): Same.
	(flow_loop_dump): Same.
	(flow_loops_dump): Same.
	(flow_loops_free): Same.
	(flow_loop_nodes_find): Same.
	(establish_preds): Same.
	(flow_loop_tree_node_add): Same.
	(flow_loop_tree_node_remove): Same.
	(flow_loops_find): Same.
	(find_subloop_latch_edge_by_profile): Same.
	(find_subloop_latch_edge_by_ivs): Same.
	(mfb_redirect_edges_in_set): Same.
	(form_subloop): Same.
	(merge_latch_edges): Same.
	(disambiguate_multiple_latches): Same.
	(disambiguate_loops_with_multiple_latches): Same.
	(flow_bb_inside_loop_p): Same.
	(glb_enum_p): Same.
	(get_loop_body_with_size): Same.
	(get_loop_body): Same.
	(fill_sons_in_loop): Same.
	(get_loop_body_in_dom_order): Same.
	(get_loop_body_in_custom_order): Same.
	(release_recorded_exits): Same.
	(get_loop_exit_edges): Same.
	(num_loop_branches): Same.
	(remove_bb_from_loops): Same.
	(find_common_loop): Same.
	(delete_loop): Same.
	(cancel_loop): Same.
	(verify_loop_structure): Same.
	(loop_preheader_edge): Same.
	(loop_exit_edge_p): Same.
	(single_exit): Same.
	(loop_exits_to_bb_p): Same.
	(loop_exits_from_bb_p): Same.
	(get_loop_location): Same.
	(record_niter_bound): Same.
	(get_estimated_loop_iterations_int): Same.
	(max_stmt_executions_int): Same.
	(likely_max_stmt_executions_int): Same.
	(get_estimated_loop_iterations): Same.
	(get_max_loop_iterations): Same.
	(get_max_loop_iterations_int): Same.
	(get_likely_max_loop_iterations): Same.
	* cfgloop.h (simple_loop_desc): Same.
	(get_loop): Same.
	(loop_depth): Same.
	(loop_outer): Same.
	(loop_iterator::next): Same.
	(loop_outermost): Same.
	* cfgloopanal.c (mark_irreducible_loops): Same.
	(num_loop_insns): Same.
	(average_num_loop_insns): Same.
	(expected_loop_iterations_unbounded): Same.
	(expected_loop_iterations): Same.
	(mark_loop_exit_edges): Same.
	(single_likely_exit): Same.
	* cfgloopmanip.c (fix_bb_placement): Same.
	(fix_bb_placements): Same.
	(remove_path): Same.
	(place_new_loop): Same.
	(add_loop): Same.
	(scale_loop_frequencies): Same.
	(scale_loop_profile): Same.
	(create_empty_if_region_on_edge): Same.
	(create_empty_loop_on_edge): Same.
	(loopify): Same.
	(unloop): Same.
	(fix_loop_placements): Same.
	(copy_loop_info): Same.
	(duplicate_loop): Same.
	(duplicate_subloops): Same.
	(loop_redirect_edge): Same.
	(can_duplicate_loop_p): Same.
	(duplicate_loop_to_header_edge): Same.
	(mfb_keep_just): Same.
	(has_preds_from_loop): Same.
	(create_preheader): Same.
	(create_preheaders): Same.
	(lv_adjust_loop_entry_edge): Same.
	(loop_version): Same.
	* cfgloopmanip.h: Same.
	* cgraph.h: Same.
	* cgraphbuild.c: Same.
	* combine.c (make_extraction): Same.
	* config/i386/i386-features.c: Same.
	* config/i386/i386-features.h: Same.
	* config/i386/i386.c (ix86_emit_outlined_ms2sysv_save): Same.
	(ix86_emit_outlined_ms2sysv_restore): Same.
	(ix86_noce_conversion_profitable_p): Same.
	(ix86_init_cost): Same.
	(ix86_simd_clone_usable): Same.
	* configure.ac (ACX_PROG_CXX_WARNING_OPTS): Add -Wclass-is-pod and
	Wstruct-not-pod.
	* coretypes.h: Same.
	* data-streamer-in.c (string_for_index): Change class-key of PODs
	to struct and others to class.
	(streamer_read_indexed_string): Same.
	(streamer_read_string): Same.
	(bp_unpack_indexed_string): Same.
	(bp_unpack_string): Same.
	(streamer_read_uhwi): Same.
	(streamer_read_hwi): Same.
	(streamer_read_gcov_count): Same.
	(streamer_read_wide_int): Same.
	* data-streamer.h (streamer_write_bitpack): Same.
	(bp_unpack_value): Same.
	(streamer_write_char_stream): Same.
	(streamer_write_hwi_in_range): Same.
	(streamer_write_record_start): Same.
	* ddg.c (create_ddg_dep_from_intra_loop_link): Same.
	(add_cross_iteration_register_deps): Same.
	(build_intra_loop_deps): Same.
	* df-core.c (df_analyze): Same.
	(loop_post_order_compute): Same.
	(loop_inverted_post_order_compute): Same.
	* df-problems.c (df_rd_alloc): Same.
	(df_rd_simulate_one_insn): Same.
	(df_rd_local_compute): Same.
	(df_rd_init_solution): Same.
	(df_rd_confluence_n): Same.
	(df_rd_transfer_function): Same.
	(df_rd_free): Same.
	(df_rd_dump_defs_set): Same.
	(df_rd_top_dump): Same.
	(df_lr_alloc): Same.
	(df_lr_reset): Same.
	(df_lr_local_compute): Same.
	(df_lr_init): Same.
	(df_lr_confluence_n): Same.
	(df_lr_free): Same.
	(df_lr_top_dump): Same.
	(df_lr_verify_transfer_functions): Same.
	(df_live_alloc): Same.
	(df_live_reset): Same.
	(df_live_init): Same.
	(df_live_confluence_n): Same.
	(df_live_finalize): Same.
	(df_live_free): Same.
	(df_live_top_dump): Same.
	(df_live_verify_transfer_functions): Same.
	(df_mir_alloc): Same.
	(df_mir_reset): Same.
	(df_mir_init): Same.
	(df_mir_confluence_n): Same.
	(df_mir_free): Same.
	(df_mir_top_dump): Same.
	(df_word_lr_alloc): Same.
	(df_word_lr_reset): Same.
	(df_word_lr_init): Same.
	(df_word_lr_confluence_n): Same.
	(df_word_lr_free): Same.
	(df_word_lr_top_dump): Same.
	(df_md_alloc): Same.
	(df_md_simulate_one_insn): Same.
	(df_md_reset): Same.
	(df_md_init): Same.
	(df_md_free): Same.
	(df_md_top_dump): Same.
	* df-scan.c (df_insn_delete): Same.
	(df_insn_rescan): Same.
	(df_notes_rescan): Same.
	(df_sort_and_compress_mws): Same.
	(df_install_mws): Same.
	(df_refs_add_to_chains): Same.
	(df_ref_create_structure): Same.
	(df_ref_record): Same.
	(df_def_record_1): Same.
	(df_find_hard_reg_defs): Same.
	(df_uses_record): Same.
	(df_get_conditional_uses): Same.
	(df_get_call_refs): Same.
	(df_recompute_luids): Same.
	(df_get_entry_block_def_set): Same.
	(df_entry_block_defs_collect): Same.
	(df_get_exit_block_use_set): Same.
	(df_exit_block_uses_collect): Same.
	(df_mws_verify): Same.
	(df_bb_verify): Same.
	* df.h (df_scan_get_bb_info): Same.
	* doc/tm.texi: Same.
	* dse.c (record_store): Same.
	* dumpfile.h: Same.
	* emit-rtl.c (const_fixed_hasher::equal): Same.
	(set_mem_attributes_minus_bitpos): Same.
	(change_address): Same.
	(adjust_address_1): Same.
	(offset_address): Same.
	* emit-rtl.h: Same.
	* except.c (dw2_build_landing_pads): Same.
	(sjlj_emit_dispatch_table): Same.
	* explow.c (allocate_dynamic_stack_space): Same.
	(emit_stack_probe): Same.
	(probe_stack_range): Same.
	* expmed.c (store_bit_field_using_insv): Same.
	(store_bit_field_1): Same.
	(store_integral_bit_field): Same.
	(extract_bit_field_using_extv): Same.
	(extract_bit_field_1): Same.
	(emit_cstore): Same.
	* expr.c (emit_block_move_via_cpymem): Same.
	(expand_cmpstrn_or_cmpmem): Same.
	(set_storage_via_setmem): Same.
	(emit_single_push_insn_1): Same.
	(expand_assignment): Same.
	(store_constructor): Same.
	(expand_expr_real_2): Same.
	(expand_expr_real_1): Same.
	(try_casesi): Same.
	* flags.h: Same.
	* function.c (try_fit_stack_local): Same.
	(assign_stack_local_1): Same.
	(assign_stack_local): Same.
	(cut_slot_from_list): Same.
	(insert_slot_to_list): Same.
	(max_slot_level): Same.
	(move_slot_to_level): Same.
	(temp_address_hasher::equal): Same.
	(remove_unused_temp_slot_addresses): Same.
	(assign_temp): Same.
	(combine_temp_slots): Same.
	(update_temp_slot_address): Same.
	(preserve_temp_slots): Same.
	* function.h: Same.
	* fwprop.c: Same.
	* gcc-rich-location.h: Same.
	* gcov.c: Same.
	* genattrtab.c (check_attr_test): Same.
	(check_attr_value): Same.
	(convert_set_attr_alternative): Same.
	(convert_set_attr): Same.
	(check_defs): Same.
	(copy_boolean): Same.
	(get_attr_value): Same.
	(expand_delays): Same.
	(make_length_attrs): Same.
	(min_fn): Same.
	(make_alternative_compare): Same.
	(simplify_test_exp): Same.
	(tests_attr_p): Same.
	(get_attr_order): Same.
	(clear_struct_flag): Same.
	(gen_attr): Same.
	(compares_alternatives_p): Same.
	(gen_insn): Same.
	(gen_delay): Same.
	(find_attrs_to_cache): Same.
	(write_test_expr): Same.
	(walk_attr_value): Same.
	(write_attr_get): Same.
	(eliminate_known_true): Same.
	(write_insn_cases): Same.
	(write_attr_case): Same.
	(write_attr_valueq): Same.
	(write_attr_value): Same.
	(write_dummy_eligible_delay): Same.
	(next_comma_elt): Same.
	(find_attr): Same.
	(make_internal_attr): Same.
	(copy_rtx_unchanging): Same.
	(gen_insn_reserv): Same.
	(check_tune_attr): Same.
	(make_automaton_attrs): Same.
	(handle_arg): Same.
	* genextract.c (gen_insn): Same.
	(VEC_char_to_string): Same.
	* genmatch.c (print_operand): Same.
	(lower): Same.
	(parser::parse_operation): Same.
	(parser::parse_capture): Same.
	(parser::parse_c_expr): Same.
	(parser::parse_simplify): Same.
	(main): Same.
	* genoutput.c (output_operand_data): Same.
	(output_get_insn_name): Same.
	(compare_operands): Same.
	(place_operands): Same.
	(process_template): Same.
	(validate_insn_alternatives): Same.
	(validate_insn_operands): Same.
	(gen_expand): Same.
	(note_constraint): Same.
	* genpreds.c (write_one_predicate_function): Same.
	(add_constraint): Same.
	(process_define_register_constraint): Same.
	(write_lookup_constraint_1): Same.
	(write_lookup_constraint_array): Same.
	(write_insn_constraint_len): Same.
	(write_reg_class_for_constraint_1): Same.
	(write_constraint_satisfied_p_array): Same.
	* genrecog.c (optimize_subroutine_group): Same.
	* gensupport.c (process_define_predicate): Same.
	(queue_pattern): Same.
	(remove_from_queue): Same.
	(process_rtx): Same.
	(is_predicable): Same.
	(change_subst_attribute): Same.
	(subst_pattern_match): Same.
	(alter_constraints): Same.
	(alter_attrs_for_insn): Same.
	(shift_output_template): Same.
	(alter_output_for_subst_insn): Same.
	(process_one_cond_exec): Same.
	(subst_dup): Same.
	(process_define_cond_exec): Same.
	(mnemonic_htab_callback): Same.
	(gen_mnemonic_attr): Same.
	(read_md_rtx): Same.
	* ggc-page.c: Same.
	* gimple-loop-interchange.cc (dump_reduction): Same.
	(dump_induction): Same.
	(loop_cand::~loop_cand): Same.
	(free_data_refs_with_aux): Same.
	(tree_loop_interchange::interchange_loops): Same.
	(tree_loop_interchange::map_inductions_to_loop): Same.
	(tree_loop_interchange::move_code_to_inner_loop): Same.
	(compute_access_stride): Same.
	(compute_access_strides): Same.
	(proper_loop_form_for_interchange): Same.
	(tree_loop_interchange_compute_ddrs): Same.
	(prune_datarefs_not_in_loop): Same.
	(prepare_data_references): Same.
	(pass_linterchange::execute): Same.
	* gimple-loop-jam.c (bb_prevents_fusion_p): Same.
	(unroll_jam_possible_p): Same.
	(fuse_loops): Same.
	(adjust_unroll_factor): Same.
	(tree_loop_unroll_and_jam): Same.
	* gimple-loop-versioning.cc (loop_versioning::~loop_versioning): Same.
	(loop_versioning::expensive_stmt_p): Same.
	(loop_versioning::version_for_unity): Same.
	(loop_versioning::dump_inner_likelihood): Same.
	(loop_versioning::find_per_loop_multiplication): Same.
	(loop_versioning::analyze_term_using_scevs): Same.
	(loop_versioning::record_address_fragment): Same.
	(loop_versioning::analyze_expr): Same.
	(loop_versioning::analyze_blocks): Same.
	(loop_versioning::prune_conditions): Same.
	(loop_versioning::merge_loop_info): Same.
	(loop_versioning::add_loop_to_queue): Same.
	(loop_versioning::decide_whether_loop_is_versionable): Same.
	(loop_versioning::make_versioning_decisions): Same.
	(loop_versioning::implement_versioning_decisions): Same.
	* gimple-ssa-evrp-analyze.c
	(evrp_range_analyzer::record_ranges_from_phis): Same.
	* gimple-ssa-store-merging.c (split_store::split_store): Same.
	(count_multiple_uses): Same.
	(split_group): Same.
	(imm_store_chain_info::output_merged_store): Same.
	(pass_store_merging::process_store): Same.
	* gimple-ssa-strength-reduction.c (slsr_process_phi): Same.
	* gimple-ssa-warn-alloca.c (adjusted_warn_limit): Same.
	(is_max): Same.
	(alloca_call_type): Same.
	(pass_walloca::execute): Same.
	* gimple-streamer-in.c (input_phi): Same.
	(input_gimple_stmt): Same.
	* gimple-streamer.h: Same.
	* godump.c (go_force_record_alignment): Same.
	(go_format_type): Same.
	(go_output_type): Same.
	(go_output_fndecl): Same.
	(go_output_typedef): Same.
	(keyword_hash_init): Same.
	(find_dummy_types): Same.
	* graph.c (draw_cfg_nodes_no_loops): Same.
	(draw_cfg_nodes_for_loop): Same.
	* hard-reg-set.h (hard_reg_set_iter_next): Same.
	* hsa-brig.c: Same.
	* hsa-common.h (hsa_internal_fn_hasher::equal): Same.
	* hsa-dump.c (dump_hsa_cfun): Same.
	* hsa-gen.c (gen_function_def_parameters): Same.
	* hsa-regalloc.c (dump_hsa_cfun_regalloc): Same.
	* input.c (dump_line_table_statistics): Same.
	(test_lexer): Same.
	* input.h: Same.
	* internal-fn.c (get_multi_vector_move): Same.
	(expand_load_lanes_optab_fn): Same.
	(expand_GOMP_SIMT_ENTER_ALLOC): Same.
	(expand_GOMP_SIMT_EXIT): Same.
	(expand_GOMP_SIMT_LAST_LANE): Same.
	(expand_GOMP_SIMT_ORDERED_PRED): Same.
	(expand_GOMP_SIMT_VOTE_ANY): Same.
	(expand_GOMP_SIMT_XCHG_BFLY): Same.
	(expand_GOMP_SIMT_XCHG_IDX): Same.
	(expand_addsub_overflow): Same.
	(expand_neg_overflow): Same.
	(expand_mul_overflow): Same.
	(expand_call_mem_ref): Same.
	(expand_mask_load_optab_fn): Same.
	(expand_scatter_store_optab_fn): Same.
	(expand_gather_load_optab_fn): Same.
	* ipa-cp.c (ipa_get_parm_lattices): Same.
	(print_all_lattices): Same.
	(ignore_edge_p): Same.
	(build_toporder_info): Same.
	(free_toporder_info): Same.
	(push_node_to_stack): Same.
	(ipcp_lattice<valtype>::set_contains_variable): Same.
	(set_agg_lats_to_bottom): Same.
	(ipcp_bits_lattice::meet_with): Same.
	(set_single_call_flag): Same.
	(initialize_node_lattices): Same.
	(ipa_get_jf_ancestor_result): Same.
	(ipcp_verify_propagated_values): Same.
	(propagate_scalar_across_jump_function): Same.
	(propagate_context_across_jump_function): Same.
	(propagate_bits_across_jump_function): Same.
	(ipa_vr_operation_and_type_effects): Same.
	(propagate_vr_across_jump_function): Same.
	(set_check_aggs_by_ref): Same.
	(set_chain_of_aglats_contains_variable): Same.
	(merge_aggregate_lattices): Same.
	(agg_pass_through_permissible_p): Same.
	(propagate_aggs_across_jump_function): Same.
	(call_passes_through_thunk_p): Same.
	(propagate_constants_across_call): Same.
	(devirtualization_time_bonus): Same.
	(good_cloning_opportunity_p): Same.
	(context_independent_aggregate_values): Same.
	(gather_context_independent_values): Same.
	(perform_estimation_of_a_value): Same.
	(estimate_local_effects): Same.
	(value_topo_info<valtype>::add_val): Same.
	(add_all_node_vals_to_toposort): Same.
	(value_topo_info<valtype>::propagate_effects): Same.
	(ipcp_propagate_stage): Same.
	(ipcp_discover_new_direct_edges): Same.
	(same_node_or_its_all_contexts_clone_p): Same.
	(cgraph_edge_brings_value_p): Same.
	(gather_edges_for_value): Same.
	(create_specialized_node): Same.
	(find_more_scalar_values_for_callers_subset): Same.
	(find_more_contexts_for_caller_subset): Same.
	(copy_plats_to_inter): Same.
	(intersect_aggregates_with_edge): Same.
	(find_aggregate_values_for_callers_subset): Same.
	(cgraph_edge_brings_all_agg_vals_for_node): Same.
	(decide_about_value): Same.
	(decide_whether_version_node): Same.
	(spread_undeadness): Same.
	(identify_dead_nodes): Same.
	(ipcp_store_vr_results): Same.
	* ipa-devirt.c (final_warning_record::grow_type_warnings): Same.
	* ipa-fnsummary.c (ipa_fn_summary::account_size_time): Same.
	(redirect_to_unreachable): Same.
	(edge_set_predicate): Same.
	(evaluate_conditions_for_known_args): Same.
	(evaluate_properties_for_edge): Same.
	(ipa_fn_summary_t::duplicate): Same.
	(ipa_call_summary_t::duplicate): Same.
	(dump_ipa_call_summary): Same.
	(ipa_dump_fn_summary): Same.
	(eliminated_by_inlining_prob): Same.
	(set_cond_stmt_execution_predicate): Same.
	(set_switch_stmt_execution_predicate): Same.
	(compute_bb_predicates): Same.
	(will_be_nonconstant_expr_predicate): Same.
	(phi_result_unknown_predicate): Same.
	(analyze_function_body): Same.
	(compute_fn_summary): Same.
	(estimate_edge_devirt_benefit): Same.
	(estimate_edge_size_and_time): Same.
	(estimate_calls_size_and_time): Same.
	(estimate_node_size_and_time): Same.
	(remap_edge_change_prob): Same.
	(remap_edge_summaries): Same.
	(ipa_merge_fn_summary_after_inlining): Same.
	(ipa_fn_summary_generate): Same.
	(inline_read_section): Same.
	(ipa_fn_summary_read): Same.
	(ipa_fn_summary_write): Same.
	* ipa-fnsummary.h: Same.
	* ipa-hsa.c (ipa_hsa_read_section): Same.
	* ipa-icf-gimple.c (func_checker::compare_loops): Same.
	* ipa-icf.c (sem_function::param_used_p): Same.
	* ipa-inline-analysis.c (do_estimate_edge_time): Same.
	* ipa-inline.c (edge_badness): Same.
	(inline_small_functions): Same.
	* ipa-polymorphic-call.c
	(ipa_polymorphic_call_context::stream_out): Same.
	* ipa-predicate.c (predicate::remap_after_duplication): Same.
	(predicate::remap_after_inlining): Same.
	(predicate::stream_out): Same.
	* ipa-predicate.h: Same.
	* ipa-profile.c (ipa_profile_read_summary): Same.
	* ipa-prop.c (ipa_get_param_decl_index_1): Same.
	(count_formal_params): Same.
	(ipa_dump_param): Same.
	(ipa_alloc_node_params): Same.
	(ipa_print_node_jump_functions_for_edge): Same.
	(ipa_print_node_jump_functions): Same.
	(ipa_load_from_parm_agg): Same.
	(get_ancestor_addr_info): Same.
	(ipa_compute_jump_functions_for_edge): Same.
	(ipa_analyze_virtual_call_uses): Same.
	(ipa_analyze_stmt_uses): Same.
	(ipa_analyze_params_uses_in_bb): Same.
	(update_jump_functions_after_inlining): Same.
	(try_decrement_rdesc_refcount): Same.
	(ipa_impossible_devirt_target): Same.
	(update_indirect_edges_after_inlining): Same.
	(combine_controlled_uses_counters): Same.
	(ipa_edge_args_sum_t::duplicate): Same.
	(ipa_write_jump_function): Same.
	(ipa_write_indirect_edge_info): Same.
	(ipa_write_node_info): Same.
	(ipa_read_edge_info): Same.
	(ipa_prop_read_section): Same.
	(read_replacements_section): Same.
	* ipa-prop.h (ipa_get_param_count): Same.
	(ipa_get_param): Same.
	(ipa_get_type): Same.
	(ipa_get_param_move_cost): Same.
	(ipa_set_param_used): Same.
	(ipa_get_controlled_uses): Same.
	(ipa_set_controlled_uses): Same.
	(ipa_get_cs_argument_count): Same.
	* ipa-pure-const.c (analyze_function): Same.
	(pure_const_read_summary): Same.
	* ipa-ref.h: Same.
	* ipa-reference.c (ipa_reference_read_optimization_summary): Same.
	* ipa-split.c (test_nonssa_use): Same.
	(dump_split_point): Same.
	(dominated_by_forbidden): Same.
	(split_part_set_ssa_name_p): Same.
	(find_split_points): Same.
	* ira-build.c (finish_loop_tree_nodes): Same.
	(low_pressure_loop_node_p): Same.
	* ira-color.c (ira_reuse_stack_slot): Same.
	* ira-int.h: Same.
	* ira.c (setup_reg_equiv): Same.
	(print_insn_chain): Same.
	(ira): Same.
	* loop-doloop.c (doloop_condition_get): Same.
	(add_test): Same.
	(record_reg_sets): Same.
	(doloop_optimize): Same.
	* loop-init.c (loop_optimizer_init): Same.
	(fix_loop_structure): Same.
	* loop-invariant.c (merge_identical_invariants): Same.
	(compute_always_reached): Same.
	(find_exits): Same.
	(may_assign_reg_p): Same.
	(find_invariants_bb): Same.
	(find_invariants_body): Same.
	(replace_uses): Same.
	(can_move_invariant_reg): Same.
	(free_inv_motion_data): Same.
	(move_single_loop_invariants): Same.
	(change_pressure): Same.
	(mark_ref_regs): Same.
	(calculate_loop_reg_pressure): Same.
	* loop-iv.c (biv_entry_hasher::equal): Same.
	(iv_extend_to_rtx_code): Same.
	(check_iv_ref_table_size): Same.
	(clear_iv_info): Same.
	(latch_dominating_def): Same.
	(iv_get_reaching_def): Same.
	(iv_constant): Same.
	(iv_subreg): Same.
	(iv_extend): Same.
	(iv_neg): Same.
	(iv_add): Same.
	(iv_mult): Same.
	(get_biv_step): Same.
	(record_iv): Same.
	(analyzed_for_bivness_p): Same.
	(record_biv): Same.
	(iv_analyze_biv): Same.
	(iv_analyze_expr): Same.
	(iv_analyze_def): Same.
	(iv_analyze_op): Same.
	(iv_analyze): Same.
	(iv_analyze_result): Same.
	(biv_p): Same.
	(eliminate_implied_conditions): Same.
	(simplify_using_initial_values): Same.
	(shorten_into_mode): Same.
	(canonicalize_iv_subregs): Same.
	(determine_max_iter): Same.
	(check_simple_exit): Same.
	(find_simple_exit): Same.
	(get_simple_loop_desc): Same.
	* loop-unroll.c (report_unroll): Same.
	(decide_unrolling): Same.
	(unroll_loops): Same.
	(loop_exit_at_end_p): Same.
	(decide_unroll_constant_iterations): Same.
	(unroll_loop_constant_iterations): Same.
	(compare_and_jump_seq): Same.
	(unroll_loop_runtime_iterations): Same.
	(decide_unroll_stupid): Same.
	(unroll_loop_stupid): Same.
	(referenced_in_one_insn_in_loop_p): Same.
	(reset_debug_uses_in_loop): Same.
	(analyze_iv_to_split_insn): Same.
	* lra-eliminations.c (lra_debug_elim_table): Same.
	(setup_can_eliminate): Same.
	(form_sum): Same.
	(lra_get_elimination_hard_regno): Same.
	(lra_eliminate_regs_1): Same.
	(eliminate_regs_in_insn): Same.
	(update_reg_eliminate): Same.
	(init_elimination): Same.
	(lra_eliminate): Same.
	* lra-int.h: Same.
	* lra-lives.c (initiate_live_solver): Same.
	* lra-remat.c (create_remat_bb_data): Same.
	* lra-spills.c (lra_spill): Same.
	* lra.c (lra_set_insn_recog_data): Same.
	(lra_set_used_insn_alternative_by_uid): Same.
	(init_reg_info): Same.
	(expand_reg_info): Same.
	* lto-cgraph.c (output_symtab): Same.
	(read_identifier): Same.
	(get_alias_symbol): Same.
	(input_node): Same.
	(input_varpool_node): Same.
	(input_ref): Same.
	(input_edge): Same.
	(input_cgraph_1): Same.
	(input_refs): Same.
	(input_symtab): Same.
	(input_offload_tables): Same.
	(output_cgraph_opt_summary): Same.
	(input_edge_opt_summary): Same.
	(input_cgraph_opt_section): Same.
	* lto-section-in.c (lto_free_raw_section_data): Same.
	(lto_create_simple_input_block): Same.
	(lto_free_function_in_decl_state_for_node): Same.
	* lto-streamer-in.c (lto_tag_check_set): Same.
	(lto_location_cache::revert_location_cache): Same.
	(lto_location_cache::input_location): Same.
	(lto_input_location): Same.
	(stream_input_location_now): Same.
	(lto_input_tree_ref): Same.
	(lto_input_eh_catch_list): Same.
	(input_eh_region): Same.
	(lto_init_eh): Same.
	(make_new_block): Same.
	(input_cfg): Same.
	(fixup_call_stmt_edges): Same.
	(input_struct_function_base): Same.
	(input_function): Same.
	(lto_read_body_or_constructor): Same.
	(lto_read_tree_1): Same.
	(lto_read_tree): Same.
	(lto_input_scc): Same.
	(lto_input_tree_1): Same.
	(lto_input_toplevel_asms): Same.
	(lto_input_mode_table): Same.
	(lto_reader_init): Same.
	(lto_data_in_create): Same.
	* lto-streamer-out.c (output_cfg): Same.
	* lto-streamer.h: Same.
	* modulo-sched.c (duplicate_insns_of_cycles): Same.
	(generate_prolog_epilog): Same.
	(mark_loop_unsched): Same.
	(dump_insn_location): Same.
	(loop_canon_p): Same.
	(sms_schedule): Same.
	* omp-expand.c (expand_omp_for_ordered_loops): Same.
	(expand_omp_for_generic): Same.
	(expand_omp_for_static_nochunk): Same.
	(expand_omp_for_static_chunk): Same.
	(expand_omp_simd): Same.
	(expand_omp_taskloop_for_inner): Same.
	(expand_oacc_for): Same.
	(expand_omp_atomic_pipeline): Same.
	(mark_loops_in_oacc_kernels_region): Same.
	* omp-offload.c (oacc_xform_loop): Same.
	* omp-simd-clone.c (simd_clone_adjust): Same.
	* optabs-query.c (get_traditional_extraction_insn): Same.
	* optabs.c (expand_vector_broadcast): Same.
	(expand_binop_directly): Same.
	(expand_twoval_unop): Same.
	(expand_twoval_binop): Same.
	(expand_unop_direct): Same.
	(emit_indirect_jump): Same.
	(emit_conditional_move): Same.
	(emit_conditional_neg_or_complement): Same.
	(emit_conditional_add): Same.
	(vector_compare_rtx): Same.
	(expand_vec_perm_1): Same.
	(expand_vec_perm_const): Same.
	(expand_vec_cond_expr): Same.
	(expand_vec_series_expr): Same.
	(maybe_emit_atomic_exchange): Same.
	(maybe_emit_sync_lock_test_and_set): Same.
	(expand_atomic_compare_and_swap): Same.
	(expand_atomic_load): Same.
	(expand_atomic_store): Same.
	(maybe_emit_op): Same.
	(valid_multiword_target_p): Same.
	(create_integer_operand): Same.
	(maybe_legitimize_operand_same_code): Same.
	(maybe_legitimize_operand): Same.
	(create_convert_operand_from_type): Same.
	(can_reuse_operands_p): Same.
	(maybe_legitimize_operands): Same.
	(maybe_gen_insn): Same.
	(maybe_expand_insn): Same.
	(maybe_expand_jump_insn): Same.
	(expand_insn): Same.
	* optabs.h (create_expand_operand): Same.
	(create_fixed_operand): Same.
	(create_output_operand): Same.
	(create_input_operand): Same.
	(create_convert_operand_to): Same.
	(create_convert_operand_from): Same.
	* optinfo.h: Same.
	* poly-int.h: Same.
	* predict.c (optimize_insn_for_speed_p): Same.
	(optimize_loop_for_size_p): Same.
	(optimize_loop_for_speed_p): Same.
	(optimize_loop_nest_for_speed_p): Same.
	(get_base_value): Same.
	(predicted_by_loop_heuristics_p): Same.
	(predict_extra_loop_exits): Same.
	(predict_loops): Same.
	(predict_paths_for_bb): Same.
	(predict_paths_leading_to): Same.
	(propagate_freq): Same.
	(pass_profile::execute): Same.
	* predict.h: Same.
	* profile-count.c (profile_count::differs_from_p): Same.
	(profile_probability::differs_lot_from_p): Same.
	* profile-count.h: Same.
	* profile.c (branch_prob): Same.
	* regrename.c (free_chain_data): Same.
	(mark_conflict): Same.
	(create_new_chain): Same.
	(merge_overlapping_regs): Same.
	(init_rename_info): Same.
	(merge_chains): Same.
	(regrename_analyze): Same.
	(regrename_do_replace): Same.
	(scan_rtx_reg): Same.
	(record_out_operands): Same.
	(build_def_use): Same.
	* regrename.h: Same.
	* reload.h: Same.
	* reload1.c (init_reload): Same.
	(maybe_fix_stack_asms): Same.
	(copy_reloads): Same.
	(count_pseudo): Same.
	(count_spilled_pseudo): Same.
	(find_reg): Same.
	(find_reload_regs): Same.
	(select_reload_regs): Same.
	(spill_hard_reg): Same.
	(fixup_eh_region_note): Same.
	(set_reload_reg): Same.
	(allocate_reload_reg): Same.
	(compute_reload_subreg_offset): Same.
	(reload_adjust_reg_for_icode): Same.
	(emit_input_reload_insns): Same.
	(emit_output_reload_insns): Same.
	(do_input_reload): Same.
	(inherit_piecemeal_p): Same.
	* rtl.h: Same.
	* sanopt.c (maybe_get_dominating_check): Same.
	(maybe_optimize_ubsan_ptr_ifn): Same.
	(can_remove_asan_check): Same.
	(maybe_optimize_asan_check_ifn): Same.
	(sanopt_optimize_walker): Same.
	* sched-deps.c (add_dependence_list): Same.
	(chain_to_prev_insn): Same.
	(add_insn_mem_dependence): Same.
	(create_insn_reg_set): Same.
	(maybe_extend_reg_info_p): Same.
	(sched_analyze_reg): Same.
	(sched_analyze_1): Same.
	(get_implicit_reg_pending_clobbers): Same.
	(chain_to_prev_insn_p): Same.
	(deps_analyze_insn): Same.
	(deps_start_bb): Same.
	(sched_free_deps): Same.
	(init_deps): Same.
	(init_deps_reg_last): Same.
	(free_deps): Same.
	* sched-ebb.c: Same.
	* sched-int.h: Same.
	* sched-rgn.c (add_branch_dependences): Same.
	(concat_insn_mem_list): Same.
	(deps_join): Same.
	(sched_rgn_compute_dependencies): Same.
	* sel-sched-ir.c (reset_target_context): Same.
	(copy_deps_context): Same.
	(init_id_from_df): Same.
	(has_dependence_p): Same.
	(change_loops_latches): Same.
	(bb_top_order_comparator): Same.
	(make_region_from_loop_preheader): Same.
	(sel_init_pipelining): Same.
	(get_loop_nest_for_rgn): Same.
	(make_regions_from_the_rest): Same.
	(sel_is_loop_preheader_p): Same.
	* sel-sched-ir.h (inner_loop_header_p): Same.
	(get_all_loop_exits): Same.
	* selftest.h: Same.
	* sese.c (sese_build_liveouts): Same.
	(sese_insert_phis_for_liveouts): Same.
	* sese.h (defined_in_sese_p): Same.
	* sreal.c (sreal::stream_out): Same.
	* sreal.h: Same.
	* streamer-hooks.h: Same.
	* target-globals.c (save_target_globals): Same.
	* target-globals.h: Same.
	* target.def: Same.
	* target.h: Same.
	* targhooks.c (default_has_ifunc_p): Same.
	(default_empty_mask_is_expensive): Same.
	(default_init_cost): Same.
	* targhooks.h: Same.
	* toplev.c: Same.
	* tree-affine.c (aff_combination_mult): Same.
	(aff_combination_expand): Same.
	(aff_combination_constant_multiple_p): Same.
	* tree-affine.h: Same.
	* tree-cfg.c (build_gimple_cfg): Same.
	(replace_loop_annotate_in_block): Same.
	(replace_uses_by): Same.
	(remove_bb): Same.
	(dump_cfg_stats): Same.
	(gimple_duplicate_sese_region): Same.
	(gimple_duplicate_sese_tail): Same.
	(move_block_to_fn): Same.
	(replace_block_vars_by_duplicates): Same.
	(move_sese_region_to_fn): Same.
	(print_loops_bb): Same.
	(print_loop): Same.
	(print_loops): Same.
	(debug): Same.
	(debug_loops): Same.
	* tree-cfg.h: Same.
	* tree-chrec.c (chrec_fold_plus_poly_poly): Same.
	(chrec_fold_multiply_poly_poly): Same.
	(chrec_evaluate): Same.
	(chrec_component_in_loop_num): Same.
	(reset_evolution_in_loop): Same.
	(is_multivariate_chrec): Same.
	(chrec_contains_symbols): Same.
	(nb_vars_in_chrec): Same.
	(chrec_convert_1): Same.
	(chrec_convert_aggressive): Same.
	* tree-chrec.h: Same.
	* tree-core.h: Same.
	* tree-data-ref.c (dump_data_dependence_relation): Same.
	(canonicalize_base_object_address): Same.
	(data_ref_compare_tree): Same.
	(prune_runtime_alias_test_list): Same.
	(get_segment_min_max): Same.
	(create_intersect_range_checks): Same.
	(conflict_fn_no_dependence): Same.
	(object_address_invariant_in_loop_p): Same.
	(analyze_ziv_subscript): Same.
	(analyze_siv_subscript_cst_affine): Same.
	(analyze_miv_subscript): Same.
	(analyze_overlapping_iterations): Same.
	(build_classic_dist_vector_1): Same.
	(add_other_self_distances): Same.
	(same_access_functions): Same.
	(build_classic_dir_vector): Same.
	(subscript_dependence_tester_1): Same.
	(subscript_dependence_tester): Same.
	(access_functions_are_affine_or_constant_p): Same.
	(get_references_in_stmt): Same.
	(loop_nest_has_data_refs): Same.
	(graphite_find_data_references_in_stmt): Same.
	(find_data_references_in_bb): Same.
	(get_base_for_alignment): Same.
	(find_loop_nest_1): Same.
	(find_loop_nest): Same.
	* tree-data-ref.h (dr_alignment): Same.
	(ddr_dependence_level): Same.
	* tree-if-conv.c (fold_build_cond_expr): Same.
	(add_to_predicate_list): Same.
	(add_to_dst_predicate_list): Same.
	(phi_convertible_by_degenerating_args): Same.
	(idx_within_array_bound): Same.
	(all_preds_critical_p): Same.
	(pred_blocks_visited_p): Same.
	(predicate_bbs): Same.
	(build_region): Same.
	(if_convertible_loop_p_1): Same.
	(is_cond_scalar_reduction): Same.
	(predicate_scalar_phi): Same.
	(remove_conditions_and_labels): Same.
	(combine_blocks): Same.
	(version_loop_for_if_conversion): Same.
	(versionable_outer_loop_p): Same.
	(ifcvt_local_dce): Same.
	(tree_if_conversion): Same.
	(pass_if_conversion::gate): Same.
	* tree-if-conv.h: Same.
	* tree-inline.c (maybe_move_debug_stmts_to_successors): Same.
	* tree-loop-distribution.c (bb_top_order_cmp): Same.
	(free_rdg): Same.
	(stmt_has_scalar_dependences_outside_loop): Same.
	(copy_loop_before): Same.
	(create_bb_after_loop): Same.
	(const_with_all_bytes_same): Same.
	(generate_memset_builtin): Same.
	(generate_memcpy_builtin): Same.
	(destroy_loop): Same.
	(build_rdg_partition_for_vertex): Same.
	(compute_access_range): Same.
	(data_ref_segment_size): Same.
	(latch_dominated_by_data_ref): Same.
	(compute_alias_check_pairs): Same.
	(fuse_memset_builtins): Same.
	(finalize_partitions): Same.
	(find_seed_stmts_for_distribution): Same.
	(prepare_perfect_loop_nest): Same.
	* tree-parloops.c (lambda_transform_legal_p): Same.
	(loop_parallel_p): Same.
	(reduc_stmt_res): Same.
	(add_field_for_name): Same.
	(create_call_for_reduction_1): Same.
	(replace_uses_in_bb_by): Same.
	(transform_to_exit_first_loop_alt): Same.
	(try_transform_to_exit_first_loop_alt): Same.
	(transform_to_exit_first_loop): Same.
	(num_phis): Same.
	(gen_parallel_loop): Same.
	(gather_scalar_reductions): Same.
	(get_omp_data_i_param): Same.
	(try_create_reduction_list): Same.
	(oacc_entry_exit_single_gang): Same.
	(parallelize_loops): Same.
	* tree-pass.h: Same.
	* tree-predcom.c (determine_offset): Same.
	(last_always_executed_block): Same.
	(split_data_refs_to_components): Same.
	(suitable_component_p): Same.
	(valid_initializer_p): Same.
	(find_looparound_phi): Same.
	(insert_looparound_copy): Same.
	(add_looparound_copies): Same.
	(determine_roots_comp): Same.
	(predcom_tmp_var): Same.
	(initialize_root_vars): Same.
	(initialize_root_vars_store_elim_1): Same.
	(initialize_root_vars_store_elim_2): Same.
	(finalize_eliminated_stores): Same.
	(initialize_root_vars_lm): Same.
	(remove_stmt): Same.
	(determine_unroll_factor): Same.
	(execute_pred_commoning_cbck): Same.
	(base_names_in_chain_on): Same.
	(combine_chains): Same.
	(pcom_stmt_dominates_stmt_p): Same.
	(try_combine_chains): Same.
	(prepare_initializers_chain_store_elim): Same.
	(prepare_initializers_chain): Same.
	(prepare_initializers): Same.
	(prepare_finalizers_chain): Same.
	(prepare_finalizers): Same.
	(insert_init_seqs): Same.
	* tree-scalar-evolution.c (loop_phi_node_p): Same.
	(compute_overall_effect_of_inner_loop): Same.
	(add_to_evolution_1): Same.
	(add_to_evolution): Same.
	(follow_ssa_edge_binary): Same.
	(follow_ssa_edge_expr): Same.
	(backedge_phi_arg_p): Same.
	(follow_ssa_edge_in_condition_phi_branch): Same.
	(follow_ssa_edge_in_condition_phi): Same.
	(follow_ssa_edge_inner_loop_phi): Same.
	(follow_ssa_edge): Same.
	(analyze_evolution_in_loop): Same.
	(analyze_initial_condition): Same.
	(interpret_loop_phi): Same.
	(interpret_condition_phi): Same.
	(interpret_rhs_expr): Same.
	(interpret_expr): Same.
	(interpret_gimple_assign): Same.
	(analyze_scalar_evolution_1): Same.
	(analyze_scalar_evolution): Same.
	(analyze_scalar_evolution_for_address_of): Same.
	(get_instantiated_value_entry): Same.
	(loop_closed_phi_def): Same.
	(instantiate_scev_name): Same.
	(instantiate_scev_poly): Same.
	(instantiate_scev_binary): Same.
	(instantiate_scev_convert): Same.
	(instantiate_scev_not): Same.
	(instantiate_scev_r): Same.
	(instantiate_scev): Same.
	(resolve_mixers): Same.
	(initialize_scalar_evolutions_analyzer): Same.
	(scev_reset_htab): Same.
	(scev_reset): Same.
	(derive_simple_iv_with_niters): Same.
	(simple_iv_with_niters): Same.
	(expression_expensive_p): Same.
	(final_value_replacement_loop): Same.
	* tree-scalar-evolution.h (block_before_loop): Same.
	* tree-ssa-address.h: Same.
	* tree-ssa-dce.c (find_obviously_necessary_stmts): Same.
	* tree-ssa-dom.c (edge_info::record_simple_equiv): Same.
	(record_edge_info): Same.
	* tree-ssa-live.c (var_map_base_fini): Same.
	(remove_unused_locals): Same.
	* tree-ssa-live.h: Same.
	* tree-ssa-loop-ch.c (should_duplicate_loop_header_p): Same.
	(pass_ch_vect::execute): Same.
	(pass_ch::process_loop_p): Same.
	* tree-ssa-loop-im.c (mem_ref_hasher::hash): Same.
	(movement_possibility): Same.
	(outermost_invariant_loop): Same.
	(stmt_cost): Same.
	(determine_max_movement): Same.
	(invariantness_dom_walker::before_dom_children): Same.
	(move_computations): Same.
	(may_move_till): Same.
	(force_move_till_op): Same.
	(force_move_till): Same.
	(memref_free): Same.
	(record_mem_ref_loc): Same.
	(set_ref_stored_in_loop): Same.
	(mark_ref_stored): Same.
	(sort_bbs_in_loop_postorder_cmp): Same.
	(sort_locs_in_loop_postorder_cmp): Same.
	(analyze_memory_references): Same.
	(mem_refs_may_alias_p): Same.
	(find_ref_loc_in_loop_cmp): Same.
	(rewrite_mem_ref_loc::operator): Same.
	(first_mem_ref_loc_1::operator): Same.
	(sm_set_flag_if_changed::operator): Same.
	(execute_sm_if_changed_flag_set): Same.
	(execute_sm): Same.
	(hoist_memory_references): Same.
	(ref_always_accessed::operator): Same.
	(refs_independent_p): Same.
	(record_dep_loop): Same.
	(ref_indep_loop_p_1): Same.
	(ref_indep_loop_p): Same.
	(can_sm_ref_p): Same.
	(find_refs_for_sm): Same.
	(loop_suitable_for_sm): Same.
	(store_motion_loop): Same.
	(store_motion): Same.
	(fill_always_executed_in): Same.
	* tree-ssa-loop-ivcanon.c (constant_after_peeling): Same.
	(estimated_unrolled_size): Same.
	(loop_edge_to_cancel): Same.
	(remove_exits_and_undefined_stmts): Same.
	(remove_redundant_iv_tests): Same.
	(unloop_loops): Same.
	(estimated_peeled_sequence_size): Same.
	(try_peel_loop): Same.
	(canonicalize_loop_induction_variables): Same.
	(canonicalize_induction_variables): Same.
	* tree-ssa-loop-ivopts.c (iv_inv_expr_hasher::equal): Same.
	(name_info): Same.
	(stmt_after_inc_pos): Same.
	(contains_abnormal_ssa_name_p): Same.
	(niter_for_exit): Same.
	(find_bivs): Same.
	(mark_bivs): Same.
	(find_givs_in_bb): Same.
	(find_induction_variables): Same.
	(find_interesting_uses_cond): Same.
	(outermost_invariant_loop_for_expr): Same.
	(idx_find_step): Same.
	(add_candidate_1): Same.
	(add_iv_candidate_derived_from_uses): Same.
	(alloc_use_cost_map): Same.
	(prepare_decl_rtl): Same.
	(generic_predict_doloop_p): Same.
	(computation_cost): Same.
	(determine_common_wider_type): Same.
	(get_computation_aff_1): Same.
	(get_use_type): Same.
	(determine_group_iv_cost_address): Same.
	(iv_period): Same.
	(difference_cannot_overflow_p): Same.
	(may_eliminate_iv): Same.
	(determine_set_costs): Same.
	(cheaper_cost_pair): Same.
	(compare_cost_pair): Same.
	(iv_ca_cand_for_group): Same.
	(iv_ca_recount_cost): Same.
	(iv_ca_set_remove_invs): Same.
	(iv_ca_set_no_cp): Same.
	(iv_ca_set_add_invs): Same.
	(iv_ca_set_cp): Same.
	(iv_ca_add_group): Same.
	(iv_ca_cost): Same.
	(iv_ca_compare_deps): Same.
	(iv_ca_delta_reverse): Same.
	(iv_ca_delta_commit): Same.
	(iv_ca_cand_used_p): Same.
	(iv_ca_delta_free): Same.
	(iv_ca_new): Same.
	(iv_ca_free): Same.
	(iv_ca_dump): Same.
	(iv_ca_extend): Same.
	(iv_ca_narrow): Same.
	(iv_ca_prune): Same.
	(cheaper_cost_with_cand): Same.
	(iv_ca_replace): Same.
	(try_add_cand_for): Same.
	(get_initial_solution): Same.
	(try_improve_iv_set): Same.
	(find_optimal_iv_set_1): Same.
	(create_new_iv): Same.
	(rewrite_use_compare): Same.
	(remove_unused_ivs): Same.
	(determine_scaling_factor): Same.
	* tree-ssa-loop-ivopts.h: Same.
	* tree-ssa-loop-manip.c (create_iv): Same.
	(compute_live_loop_exits): Same.
	(add_exit_phi): Same.
	(add_exit_phis): Same.
	(find_uses_to_rename_use): Same.
	(find_uses_to_rename_def): Same.
	(find_uses_to_rename_in_loop): Same.
	(rewrite_into_loop_closed_ssa): Same.
	(check_loop_closed_ssa_bb): Same.
	(split_loop_exit_edge): Same.
	(ip_end_pos): Same.
	(ip_normal_pos): Same.
	(copy_phi_node_args): Same.
	(gimple_duplicate_loop_to_header_edge): Same.
	(can_unroll_loop_p): Same.
	(determine_exit_conditions): Same.
	(scale_dominated_blocks_in_loop): Same.
	(niter_for_unrolled_loop): Same.
	(tree_transform_and_unroll_loop): Same.
	(rewrite_all_phi_nodes_with_iv): Same.
	* tree-ssa-loop-manip.h: Same.
	* tree-ssa-loop-niter.c (number_of_iterations_ne_max): Same.
	(number_of_iterations_ne): Same.
	(assert_no_overflow_lt): Same.
	(assert_loop_rolls_lt): Same.
	(number_of_iterations_lt): Same.
	(adjust_cond_for_loop_until_wrap): Same.
	(tree_simplify_using_condition): Same.
	(simplify_using_initial_conditions): Same.
	(simplify_using_outer_evolutions): Same.
	(loop_only_exit_p): Same.
	(ssa_defined_by_minus_one_stmt_p): Same.
	(number_of_iterations_popcount): Same.
	(number_of_iterations_exit): Same.
	(find_loop_niter): Same.
	(finite_loop_p): Same.
	(chain_of_csts_start): Same.
	(get_val_for): Same.
	(loop_niter_by_eval): Same.
	(derive_constant_upper_bound_ops): Same.
	(do_warn_aggressive_loop_optimizations): Same.
	(record_estimate): Same.
	(get_cst_init_from_scev): Same.
	(record_nonwrapping_iv): Same.
	(idx_infer_loop_bounds): Same.
	(infer_loop_bounds_from_ref): Same.
	(infer_loop_bounds_from_array): Same.
	(infer_loop_bounds_from_pointer_arith): Same.
	(infer_loop_bounds_from_signedness): Same.
	(bound_index): Same.
	(discover_iteration_bound_by_body_walk): Same.
	(maybe_lower_iteration_bound): Same.
	(estimate_numbers_of_iterations): Same.
	(estimated_loop_iterations): Same.
	(estimated_loop_iterations_int): Same.
	(max_loop_iterations): Same.
	(max_loop_iterations_int): Same.
	(likely_max_loop_iterations): Same.
	(likely_max_loop_iterations_int): Same.
	(estimated_stmt_executions_int): Same.
	(max_stmt_executions): Same.
	(likely_max_stmt_executions): Same.
	(estimated_stmt_executions): Same.
	(stmt_dominates_stmt_p): Same.
	(nowrap_type_p): Same.
	(loop_exits_before_overflow): Same.
	(scev_var_range_cant_overflow): Same.
	(scev_probably_wraps_p): Same.
	(free_numbers_of_iterations_estimates): Same.
	* tree-ssa-loop-niter.h: Same.
	* tree-ssa-loop-prefetch.c (release_mem_refs): Same.
	(idx_analyze_ref): Same.
	(analyze_ref): Same.
	(gather_memory_references_ref): Same.
	(mark_nontemporal_store): Same.
	(emit_mfence_after_loop): Same.
	(may_use_storent_in_loop_p): Same.
	(mark_nontemporal_stores): Same.
	(should_unroll_loop_p): Same.
	(volume_of_dist_vector): Same.
	(add_subscript_strides): Same.
	(self_reuse_distance): Same.
	(insn_to_prefetch_ratio_too_small_p): Same.
	* tree-ssa-loop-split.c (split_at_bb_p): Same.
	(patch_loop_exit): Same.
	(find_or_create_guard_phi): Same.
	(easy_exit_values): Same.
	(connect_loop_phis): Same.
	(connect_loops): Same.
	(compute_new_first_bound): Same.
	(split_loop): Same.
	(tree_ssa_split_loops): Same.
	* tree-ssa-loop-unswitch.c (tree_ssa_unswitch_loops): Same.
	(is_maybe_undefined): Same.
	(tree_may_unswitch_on): Same.
	(simplify_using_entry_checks): Same.
	(tree_unswitch_single_loop): Same.
	(tree_unswitch_loop): Same.
	(tree_unswitch_outer_loop): Same.
	(empty_bb_without_guard_p): Same.
	(used_outside_loop_p): Same.
	(get_vop_from_header): Same.
	(hoist_guard): Same.
	* tree-ssa-loop.c (gate_oacc_kernels): Same.
	(get_lsm_tmp_name): Same.
	* tree-ssa-loop.h: Same.
	* tree-ssa-reassoc.c (add_repeat_to_ops_vec): Same.
	(build_and_add_sum): Same.
	(no_side_effect_bb): Same.
	(get_ops): Same.
	(linearize_expr): Same.
	(should_break_up_subtract): Same.
	(linearize_expr_tree): Same.
	* tree-ssa-scopedtables.c: Same.
	* tree-ssa-scopedtables.h: Same.
	* tree-ssa-structalias.c (condense_visit): Same.
	(label_visit): Same.
	(dump_pred_graph): Same.
	(perform_var_substitution): Same.
	(move_complex_constraints): Same.
	(remove_preds_and_fake_succs): Same.
	* tree-ssa-threadupdate.c (dbds_continue_enumeration_p): Same.
	(determine_bb_domination_status): Same.
	(duplicate_thread_path): Same.
	(thread_through_all_blocks): Same.
	* tree-ssa-threadupdate.h: Same.
	* tree-streamer-in.c (streamer_read_string_cst): Same.
	(input_identifier): Same.
	(unpack_ts_type_common_value_fields): Same.
	(unpack_ts_block_value_fields): Same.
	(unpack_ts_translation_unit_decl_value_fields): Same.
	(unpack_ts_omp_clause_value_fields): Same.
	(streamer_read_tree_bitfields): Same.
	(streamer_alloc_tree): Same.
	(lto_input_ts_common_tree_pointers): Same.
	(lto_input_ts_vector_tree_pointers): Same.
	(lto_input_ts_poly_tree_pointers): Same.
	(lto_input_ts_complex_tree_pointers): Same.
	(lto_input_ts_decl_minimal_tree_pointers): Same.
	(lto_input_ts_decl_common_tree_pointers): Same.
	(lto_input_ts_decl_non_common_tree_pointers): Same.
	(lto_input_ts_decl_with_vis_tree_pointers): Same.
	(lto_input_ts_field_decl_tree_pointers): Same.
	(lto_input_ts_function_decl_tree_pointers): Same.
	(lto_input_ts_type_common_tree_pointers): Same.
	(lto_input_ts_type_non_common_tree_pointers): Same.
	(lto_input_ts_list_tree_pointers): Same.
	(lto_input_ts_vec_tree_pointers): Same.
	(lto_input_ts_exp_tree_pointers): Same.
	(lto_input_ts_block_tree_pointers): Same.
	(lto_input_ts_binfo_tree_pointers): Same.
	(lto_input_ts_constructor_tree_pointers): Same.
	(lto_input_ts_omp_clause_tree_pointers): Same.
	(streamer_read_tree_body): Same.
	* tree-streamer.h: Same.
	* tree-switch-conversion.c (bit_test_cluster::is_beneficial): Same.
	* tree-vect-data-refs.c (vect_get_smallest_scalar_type): Same.
	(vect_analyze_possibly_independent_ddr): Same.
	(vect_analyze_data_ref_dependence): Same.
	(vect_compute_data_ref_alignment): Same.
	(vect_enhance_data_refs_alignment): Same.
	(vect_analyze_data_ref_access): Same.
	(vect_check_gather_scatter): Same.
	(vect_find_stmt_data_reference): Same.
	(vect_create_addr_base_for_vector_ref): Same.
	(vect_setup_realignment): Same.
	(vect_supportable_dr_alignment): Same.
	* tree-vect-loop-manip.c (rename_variables_in_bb): Same.
	(adjust_phi_and_debug_stmts): Same.
	(vect_set_loop_mask): Same.
	(add_preheader_seq): Same.
	(vect_maybe_permute_loop_masks): Same.
	(vect_set_loop_masks_directly): Same.
	(vect_set_loop_condition_masked): Same.
	(vect_set_loop_condition_unmasked): Same.
	(slpeel_duplicate_current_defs_from_edges): Same.
	(slpeel_add_loop_guard): Same.
	(slpeel_can_duplicate_loop_p): Same.
	(create_lcssa_for_virtual_phi): Same.
	(iv_phi_p): Same.
	(vect_update_ivs_after_vectorizer): Same.
	(vect_gen_vector_loop_niters_mult_vf): Same.
	(slpeel_update_phi_nodes_for_loops): Same.
	(slpeel_update_phi_nodes_for_guard1): Same.
	(find_guard_arg): Same.
	(slpeel_update_phi_nodes_for_guard2): Same.
	(slpeel_update_phi_nodes_for_lcssa): Same.
	(vect_do_peeling): Same.
	(vect_create_cond_for_alias_checks): Same.
	(vect_loop_versioning): Same.
	* tree-vect-loop.c (vect_determine_vf_for_stmt): Same.
	(vect_inner_phi_in_double_reduction_p): Same.
	(vect_analyze_scalar_cycles_1): Same.
	(vect_fixup_scalar_cycles_with_patterns): Same.
	(vect_get_loop_niters): Same.
	(bb_in_loop_p): Same.
	(vect_get_max_nscalars_per_iter): Same.
	(vect_verify_full_masking): Same.
	(vect_compute_single_scalar_iteration_cost): Same.
	(vect_analyze_loop_form_1): Same.
	(vect_analyze_loop_form): Same.
	(vect_active_double_reduction_p): Same.
	(vect_analyze_loop_operations): Same.
	(neutral_op_for_slp_reduction): Same.
	(vect_is_simple_reduction): Same.
	(vect_model_reduction_cost): Same.
	(get_initial_def_for_reduction): Same.
	(get_initial_defs_for_reduction): Same.
	(vect_create_epilog_for_reduction): Same.
	(vectorize_fold_left_reduction): Same.
	(vectorizable_reduction): Same.
	(vectorizable_induction): Same.
	(vectorizable_live_operation): Same.
	(loop_niters_no_overflow): Same.
	(vect_get_loop_mask): Same.
	(vect_transform_loop_stmt): Same.
	(vect_transform_loop): Same.
	* tree-vect-patterns.c (vect_reassociating_reduction_p): Same.
	(vect_determine_precisions): Same.
	(vect_pattern_recog_1): Same.
	* tree-vect-slp.c (vect_analyze_slp_instance): Same.
	* tree-vect-stmts.c (stmt_vectype): Same.
	(process_use): Same.
	(vect_init_vector_1): Same.
	(vect_truncate_gather_scatter_offset): Same.
	(get_group_load_store_type): Same.
	(vect_build_gather_load_calls): Same.
	(vect_get_strided_load_store_ops): Same.
	(vectorizable_simd_clone_call): Same.
	(vectorizable_store): Same.
	(permute_vec_elements): Same.
	(vectorizable_load): Same.
	(vect_transform_stmt): Same.
	(supportable_widening_operation): Same.
	* tree-vectorizer.c (vec_info::replace_stmt): Same.
	(vec_info::free_stmt_vec_info): Same.
	(vect_free_loop_info_assumptions): Same.
	(vect_loop_vectorized_call): Same.
	(set_uid_loop_bbs): Same.
	(vectorize_loops): Same.
	* tree-vectorizer.h (STMT_VINFO_BB_VINFO): Same.
	* tree.c (add_tree_to_fld_list): Same.
	(fld_type_variant_equal_p): Same.
	(fld_decl_context): Same.
	(fld_incomplete_type_of): Same.
	(free_lang_data_in_binfo): Same.
	(need_assembler_name_p): Same.
	(find_decls_types_r): Same.
	(get_eh_types_for_runtime): Same.
	(find_decls_types_in_eh_region): Same.
	(find_decls_types_in_node): Same.
	(assign_assembler_name_if_needed): Same.
	* value-prof.c (stream_out_histogram_value): Same.
	* value-prof.h: Same.
	* var-tracking.c (use_narrower_mode): Same.
	(prepare_call_arguments): Same.
	(vt_expand_loc_callback): Same.
	(resolve_expansions_pending_recursion): Same.
	(vt_expand_loc): Same.
	* varasm.c (const_hash_1): Same.
	(compare_constant): Same.
	(tree_output_constant_def): Same.
	(simplify_subtraction): Same.
	(get_pool_constant): Same.
	(output_constant_pool_2): Same.
	(output_constant_pool_1): Same.
	(mark_constants_in_pattern): Same.
	(mark_constant_pool): Same.
	(get_section_anchor): Same.
	* vr-values.c (compare_range_with_value): Same.
	(vr_values::extract_range_from_phi_node): Same.
	* vr-values.h: Same.
	* web.c (unionfind_union): Same.
	* wide-int.h: Same.

2019-07-09  Martin Sebor  <msebor@redhat.com>

	PR c++/61339
	* align.h: Change class-key from class to struct and vice versa
	to match convention and avoid -Wclass-is-pod and -Wstruct-no-pod.
	* alloc-pool.h: Same.
	* asan.c (shadow_mem_size): Same.
	* auto-profile.c: Same.
	* basic-block.h: Same.
	* bitmap.h: Same.
	* cfgexpand.c (set_rtl): Same.
	(expand_one_stack_var_at): Same.
	* cfghooks.h: Same.
	* cfgloop.h: Same.
	* cgraph.h: Same.
	* config/i386/i386.h: Same.
	* df-problems.c (df_print_bb_index): Same.
	* df-scan.c: Same.
	* df.h (df_single_use): Same.
	* diagnostic-show-locus.c (layout::print_annotation_line): Same.
	(layout::annotation_line_showed_range_p): Same.
	(get_printed_columns): Same.
	(correction::ensure_terminated): Same.
	(line_corrections::~line_corrections): Same.
	* dojump.h: Same.
	* dse.c: Same.
	* dump-context.h: Same.
	* dumpfile.h: Same.
	* dwarf2out.c: Same.
	* edit-context.c: Same.
	* fibonacci_heap.c (test_union_of_equal_heaps): Same.
	* flags.h: Same.
	* function.c (assign_stack_local): Same.
	* function.h: Same.
	* gcc.c: Same.
	* gcov.c (block_info::block_info): Same.
	* genattrtab.c: Same.
	* genextract.c: Same.
	* genmatch.c (comparison_code_p): Same.
	(id_base::id_base): Same.
	(decision_tree::print): Same.
	* genoutput.c: Same.
	* genpreds.c (write_one_predicate_function): Same.
	* genrecog.c (validate_pattern): Same.
	(find_operand_positions): Same.
	(optimize_subroutine_group): Same.
	(merge_pattern_transition::merge_pattern_transition): Same.
	(merge_pattern_info::merge_pattern_info): Same.
	(merge_state_result::merge_state_result): Same.
	(merge_into_state): Same.
	* gensupport.c: Same.
	* gensupport.h: Same.
	* ggc-common.c (init_ggc_heuristics): Same.
	* ggc-tests.c (test_union): Same.
	* gimple-loop-interchange.cc (dump_induction): Same.
	* gimple-loop-versioning.cc: Same.
	* gimple-match.h (gimple_match_cond::any_else): Same.
	* gimple-ssa-backprop.c: Same.
	* gimple-ssa-sprintf.c: Same.
	* gimple-ssa-store-merging.c (store_operand_info::store_operand_info):
	Same.
	(store_immediate_info::store_immediate_info): Same.
	(merged_store_group::apply_stores): Same.
	(get_location_for_stmts): Same.
	* gimple-ssa-strength-reduction.c: Same.
	* gimple-ssa-warn-alloca.c: Same.
	* gimple-ssa-warn-restrict.c (pass_wrestrict::execute): Same.
	* godump.c (go_type_decl): Same.
	* hash-map-tests.c (test_map_of_strings_to_int): Same.
	* hash-map.h: Same.
	* hash-set-tests.c (test_set_of_strings): Same.
	* hsa-brig.c: Same.
	* hsa-common.h: Same.
	* hsa-gen.c (transformable_switch_to_sbr_p): Same.
	* input.c (assert_loceq): Same.
	* input.h: Same.
	* ipa-cp.c: Same.
	* ipa-devirt.c (possible_polymorphic_call_targets_1): Same.
	* ipa-fnsummary.h: Same.
	* ipa-inline.h: Same.
	* ipa-prop.h: Same.
	* ipa-split.c (visit_bb): Same.
	* ira-int.h (minmax_set_iter_next): Same.
	* loop-invariant.c: Same.
	* loop-iv.c: Same.
	* lra-eliminations.c: Same.
	* lra-int.h: Same.
	* lra-lives.c (mark_regno_dead): Same.
	* lra-remat.c: Same.
	* lra-spills.c: Same.
	* lto-streamer.h: Same.
	* mem-stats.h: Same.
	* omp-grid.c (omp_grid_lastprivate_predicate): Same.
	* omp-low.c (omp_clause_aligned_alignment): Same.
	* optabs-query.h (get_vcond_eq_icode): Same.
	* optabs.h: Same.
	* opts.c (wrap_help): Same.
	* poly-int.h: Same.
	* predict.c (predict_paths_leading_to_edge): Same.
	* pretty-print.h: Same.
	* profile-count.h: Same.
	* read-md.h: Same.
	* read-rtl-function.c: Same.
	* ree.c: Same.
	* reginfo.c: Same.
	* regrename.c: Same.
	* regrename.h: Same.
	* reload.h: Same.
	* rtl-iter.h: Same.
	* rtl.h (costs_add_n_insns): Same.
	* sanopt.c: Same.
	* sched-int.h: Same.
	* sel-sched-ir.h: Same.
	* selftest.h: Same.
	* sese.h (vec_find): Same.
	* stmt.c: Same.
	* target-globals.h: Same.
	* tree-affine.c (aff_combination_find_elt): Same.
	* tree-affine.h: Same.
	* tree-data-ref.h: Same.
	* tree-outof-ssa.c (ssa_is_replaceable_p): Same.
	* tree-predcom.c: Same.
	* tree-scalar-evolution.c (find_var_scev_info): Same.
	* tree-ssa-alias.h: Same.
	* tree-ssa-ccp.c: Same.
	* tree-ssa-coalesce.c (ssa_conflicts_dump): Same.
	* tree-ssa-loop-im.c (for_all_locs_in_loop): Same.
	(rewrite_mem_refs): Same.
	(execute_sm_if_changed): Same.
	(hoist_memory_references): Same.
	* tree-ssa-loop-ivopts.c (operator<=): Same.
	* tree-ssa-loop.h: Same.
	* tree-ssa-pre.c (get_or_alloc_expr_for_name): Same.
	* tree-ssa-structalias.c: Same.
	* tree-switch-conversion.h (cluster::cluster): Same.
	(simple_cluster::simple_cluster): Same.
	* tree-vect-patterns.c (type_conversion_p): Same.
	* tree-vectorizer.c (dump_stmt_cost): Same.
	* tree-vectorizer.h (loop_vec_info_for_loop): Same.
	* tree.c (protected_set_expr_location): Same.
	* tree.h (desired_pro_or_demotion_p): Same.
	(fndecl_built_in_p): Same.
	* unique-ptr-tests.cc: Same.
	* var-tracking.c (delete_variable_part): Same.
	* varasm.c (assemble_real): Same.
	(tree_output_constant_def): Same.
	* vec.c: Same.
	* wide-int-bitmask.h: Same.
	* wide-int.h (decompose): Same.

2019-07-09  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91114
	* tree-vect-data-refs.c (vect_analyze_data_refs): Failure to
	find a vector type isn't fatal.

2019-07-09  Sylvia Taylor  <sylvia.taylor@arm.com>

	* config/aarch64/aarch64-simd.md
	(aarch64_crypto_aes<aes_op>v16qi): Redefine pattern with xor.
	(aarch64_crypto_aes<aesmc_op>v16qi): Remove attribute enabled.
	(*aarch64_crypto_aes<aes_op>v16qi_xor_combine): Remove both.
	(*aarch64_crypto_aese_fused,
	*aarch64_crypto_aesd_fused): Update to new definition.
	* config/aarch64/aarch64.c
	(aarch_macro_fusion_pair_p): Remove aese/aesmc fusion check.

2019-07-09  Richard Biener  <rguenther@suse.de>

	* gimple-match.h (gimple_match_op::resimplify): New.
	(gimple_resimplify1, gimple_resimplify2, gimple_resimplify3,
	gimple_resimplify4, gimple_resimplify5): Remove.
	* gimple-match-head.c (gimple_resimplify1, gimple_resimplify2,
	gimple_resimplify3, gimple_resimplify4, gimple_resimplify5):
	Make static.
	(gimple_match_op::resimplify): New.
	* tree-ssa-sccvn.c (vn_nary_build_or_lookup_1): Valueize
	according to availability.  Use gimple_match_op::resimplify.

2019-07-09  Eric Botcazou  <ebotcazou@adacore.com>

	* ira-emit.c (emit_moves): Skip DEBUG_INSNs when setting the location.

2019-07-09  Sylvia Taylor  <sylvia.taylor@arm.com>

	* config/arm/crypto.md:
	(crypto_<crypto_pattern>): Redefine aese/aesd pattern with xor.
	(crypto_<crypto_pattern>): Remove attribute enabled for aesmc.
	(crypto_<crypto_pattern>): Split CRYPTO_BINARY into 2 patterns.
	(*aarch32_crypto_aese_fused, *aarch32_crypto_aesd_fused): New.
	* config/arm/arm.c
	(aarch_macro_fusion_pair_p): Remove aes/aesmc fusion check.
	* config/arm/aarch-common-protos.h
	(aarch_crypto_can_dual_issue): Remove.
	* config/arm/aarch-common.c
	(aarch_crypto_can_dual_issue): Likewise.
	* config/arm/exynos-m1.md: Remove aese/aesmc fusion.
	* config/arm/cortex-a53.md: Likewise.
	* config/arm/cortex-a57.md: Likewise.
	* config/arm/iterators.md:
	(CRYPTO_BINARY): Redefine.
	(CRYPTO_UNARY): Removed.
	(CRYPTO_AES, CRYPTO_AESMC): New.

2019-07-09  Richard Biener  <rguenther@suse.de>

	* tree-ssa-sccvn.c (struct vn_walk_cb_data): Add orig_ref member.
	(vn_reference_lookup_3): If the main ref has no access path recorded
	but orig_ref has use it to do access-path based disambiguation.
	(vn_reference_lookup_pieces): Adjust.
	(vn_reference_lookup): Pass down original ref if we valueized.

2019-07-09  Martin Liska  <mliska@suse.cz>

	* doc/extend.texi: Document influence on loop
	optimizers.

2019-07-09  Martin Liska  <mliska@suse.cz>

	* lto-compress.c (lto_normalized_zstd_level): Do not use
	ZSTD_CLEVEL_DEFAULT as it is not default in old releases
	of libzstd.  One can use 0 as a default compression level.

2019-07-09  Martin Liska  <mliska@suse.cz>

	* doc/invoke.texi: Add link from -fprofile-dir option.
	Use better wording for 'gcno filename'.

2019-07-08  Martin Sebor  <msebor@redhat.com>

	PR middle-end/71924
	PR middle-end/90549
	* gimple-ssa-isolate-paths.c (isolate_path): Add attribute.  Update
	comment.
	(args_loc_t): New type.
	(args_loc_t, locmap_t): same.
	(diag_returned_locals): New function.
	(is_addr_local): Same.
	(handle_return_addr_local_phi_arg, warn_return_addr_local): Same.
	(find_implicit_erroneous_behavior): Call warn_return_addr_local_phi_arg.
	(find_explicit_erroneous_behavior): Call warn_return_addr_local.

2019-07-08  Jakub Jelinek  <jakub@redhat.com>

	* tree-vect-stmts.c (scan_operand_equal_p): Look through MEM_REF
	with SSA_NAME address of POINTER_PLUS_EXPR.  Handle MULT_EXPR
	and casts in offset when different, both through gimple stmts
	and through trees.  Rewritten using loops to minimize code duplication
	for each operand.

2019-07-08  Eric Botcazou  <ebotcazou@adacore.com>

	* emit-rtl.c (set_insn_locations): New function moved from...
	* function.c (set_insn_locations): ...here.
	* ira-emit.c (emit_moves): Propagate location of the first instruction
	to the inserted move instructions.
	* reg-stack.c (compensate_edge): Set the location if the sequence is
	inserted on the edge.
	* rtl.h (set_insn_locations): Declare.

2019-07-08  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.c (rs6000_machine_from_flags): Ignore
	OPTION_MASK_PPC_GFXOPT and OPTION_MASK_PPC_GPOPT for selecting the
	.machine string.

2019-07-08  Segher Boessenkool  <segher@kernel.crashing.org>

	PR rtl-optimization/88233
	* common.opt (fsplit-wide-types-early): New option.
	* common/config/rs6000/rs6000-common.c
	(rs6000_option_optimization_table): Add OPT_fsplit_wide_types_early for
	OPT_LEVELS_ALL.
	* doc/invoke.texi (Optimization Options): Add -fsplit-wide-types-early.
	* lower-subreg.c (pass_lower_subreg2::gate): Add test for
	flag_split_wide_types_early.
	(pass_data_lower_subreg3): New.
	(pass_lower_subreg3): New.
	(make_pass_lower_subreg3): New.
	* passes.def (pass_lower_subreg2): Move after the loop passes.
	(pass_lower_subreg3): New, inserted where pass_lower_subreg2 was.
	* tree-pass.h (make_pass_lower_subreg2): Move up, to its new place in
	the pass pipeline; its previous place is taken by ...
	(make_pass_lower_subreg3): ... this.

2019-07-08  Robin Dapp  <rdapp@linux.ibm.com>

	* config/s390/s390.c (s390_shift_truncation_mask): Define.
	(TARGET_SHIFT_TRUNCATION_MASK): Define.

2019-07-08  Robin Dapp  <rdapp@linux.ibm.com>

	* config/s390/constraints.md: Add new jsc constraint.
	* config/s390/predicates.md: New predicates.
	* config/s390/s390-protos.h (s390_valid_shift_count): New function.
	* config/s390/s390.c (s390_valid_shift_count): New function.
	(print_shift_count_operand): Use s390_valid_shift_count.
	(print_operand): Likewise.
	* config/s390/s390.md: Use new predicate.
	* config/s390/subst.md: Remove addr_style_op and masked_op substs.
	* config/s390/vector.md: Use new predicate.

2019-07-08  Andrew Waterman  <andrew@sifive.com>
	    Jim Wilson  <jimw@sifive.com>

	* config/riscv/riscv.md (lshrsi3_zero_extend_3+1): Use operands[1]
	bitsize	instead of BITS_PER_WORD.

2019-07-08  Martin Liska  <mliska@suse.cz>

	* collect2.c (defined): Revert to before r254460.
	(scan_prog_file): Revert to before r254460.

2019-07-08  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/83518
	* tree-ssa-sccvn.c: Include splay-tree.h.
	(struct pd_range, struct pd_data): New.
	(struct vn_walk_cb_data): Add data to track partial definitions.
	(vn_walk_cb_data::~vn_walk_cb_data): New.
	(vn_walk_cb_data::push_partial_def): New.
	(pd_tree_alloc, pd_tree_dealloc, pd_range_compare): New.
	(vn_reference_lookup_2): When partial defs are registered give up.
	(vn_reference_lookup_3): Track partial defs for memset and
	constructor zeroing and for defs from constants.

2019-07-08  Richard Sandiford  <richard.sandiford@arm.com>

	* doc/install.texi (bootstrap-Og): Document.

2019-07-08  Richard Sandiford  <richard.sandiford@arm.com>

	* config/riscv/pic.md (*local_pic_load_s<mode>)
	(*local_pic_load_u<mode>): Explicitly specify the mode iterator
	referenced by <mode>, giving...
	(*local_pic_load_s<SUBX:mode>, *local_pic_load_u<SUBX:mode>): ...these.
	* config/riscv/riscv.md (*sge<u>_<X:mode><GPR:mode>)
	(*slt<u>_<X:mode><GPR:mode>, *sle<u>_<X:mode><GPR:mode>): Explicitly
	use <X:MODE> for the mode attribute.

2019-07-07  Jeff Law  <law@redhat.com>

	PR tree-optimization/91090
	* tree-ssa-dom.c (simplify_stmt_for_jump_threading): Fix logic error
	in handling of ranges to simplify switch statements.

2019-07-07  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin.c (darwin_override_options): Make a final check on PIC
	options.

2019-07-07  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin.c (darwin_override_options): Don't jam symbol stubs
	on for kernel code.

2019-07-07  Richard Sandiford  <richard.sandiford@arm.com>

	PR target/91068
	* config/mips/mips.md (*mul_acc_si, *mul_acc_si_r3900, *macc)
	(*msac, *msac_using_macc, *mul_sub_si): Use "l" for input operands
	instead of matching them to "l" output operands.

2019-07-07  Richard Sandiford  <richard.sandiford@arm.com>

	* config/mips/mips.c (mips_split_move): Zero-initialize addr
	and check whether addr.reg is nonnull before using it.

2019-07-06  Jakub Jelinek  <jakub@redhat.com>

	* omp-low.c (lower_rec_input_clauses): For lastprivate clauses in
	ctx->for_simd_scan_phase simd copy the outer var to the privatized
	variable(s).  For conditional lastprivate look through outer
	GIMPLE_OMP_SCAN context.
	(lower_omp_1): For conditional lastprivate look through outer
	GIMPLE_OMP_SCAN context.

	* omp-low.c (struct omp_context): Rename combined_into_simd_safelen0
	member to combined_into_simd_safelen1.
	(lower_rec_input_clauses, lower_omp_1): Adjust uses.
	(lower_lastprivate_clauses): Likewise.  For conditional lastprivate
	clauses if ctx->combined_into_simd_safelen1 put statements after the
	predicate conditionalized block rather than into it.

2019-07-06  Richard Sandiford  <richard.sandiford@arm.com>

	* config/s390/s390.md (*negabs<FP:mode>2_nocc): Use FP for
	operand 1.
	* config/s390/vx-builtins.md (*vec_cmp<insn_cmp><mode>_cconly):
	Make the choice of <mode> explicit, giving...
	(*vec_cmp<insn_cmp><VF_HW:mode>_cconly): ...this.

2019-07-06  Richard Sandiford  <richard.sandiford@arm.com>

	* config/i386/i386.md (*fop_<X87MODEF:mode>_3_i387)
	(l<rounding_insn><MODEF:mode><SWI48:mode>2): Fix ambiguous uses
	of .md attributes.
	* config/i386/sse.md (*avx512pf_gatherpf<mode>sf_mask)
	(*avx512pf_gatherpf<mode>df_mask, *avx512pf_scatterpf<mode>sf_mask)
	(*avx512pf_scatterpf<mode>df_mask, *avx2_gathersi<mode>)
	(*avx2_gathersi<mode>_2, *avx2_gatherdi<mode>)
	(*avx2_gatherdi<mode>_2, *avx2_gatherdi<mode>_3): Likewise.
	(*avx2_gatherdi<mode>_4, *avx512f_gathersi<mode>): Likewise.
	(*avx512f_gathersi<mode>_2, *avx512f_gatherdi<mode>): Likewise.
	(*avx512f_gatherdi<mode>_2, *avx512f_scattersi<mode>): Likewise.
	(*avx512f_scatterdi<mode>): Likewise.
	(*andnot<mode>3_bcst): Fix VI/VI48_AVX512VL typo.

2019-07-06  Richard Sandiford  <richard.sandiford@arm.com>

	* config/h8300/h8300.md (*push1_h8300hs_<mode>): Explicitly
	specify the mode iterator referenced by <mode>, giving...
	(*push1_h8300hs_<QHI:mode>): ...this.

2019-07-06  Richard Sandiford  <richard.sandiford@arm.com>

	* config/gcn/gcn-valu.md
	(vcond<VEC_1REG_MODE:mode><VEC_1REG_ALT:mode>): Use
	gen_vec_cmp<VEC_1REG_ALT:mode>di rather than (implicitly)
	gen_vec_cmp<VEC_1REG_MODE:mode>di.  Explicitly use
	gen_vcond_mask_<VEC_1REG_MODE:mode>di.
	(vcond<VEC_1REG_MODE:mode><VEC_1REG_ALT:mode>_exec): Likewise,
	but using the _exec comparison patterns.
	(vcondu<VEC_1REG_INT_MODE:mode><VEC_1REG_INT_ALT:mode>): Use
	gen_vec_cmp<VEC_1REG_INT_ALT:mode>di rather than (implicitly)
	gen_vec_cmp<VEC_1REG_INT_MODE:mode>di.  Explicitly use
	gen_vcond_mask_<VEC_1REG_INT_MODE:mode>di.
	(vcondu<VEC_1REG_INT_MODE:mode><VEC_1REG_INT_ALT:mode>_exec): Likewise,
	but using the _exec comparison patterns.

2019-07-06  Richard Sandiford  <richard.sandiford@arm.com>

	* config/arm/sync.md
	(@atomic_compare_and_swap<CCSI:arch><NARROW:mode>_1): Use
	<NARROW:sync_predtab> instead of (implicitly) <CCSI:sync_predtab>.
	(@atomic_compare_and_swap<CCSI:arch><SIDI:mode>_1): Likewise use
	<SIDI:sync_predtab>.  Use <SIDI:cas_cmp_operand> and
	<SIDI:cas_cmp_str>.

2019-07-06  Jakub Jelinek  <jakub@redhat.com>

	* omp-low.c (struct omp_context): Add for_simd_scan_phase member.
	(maybe_lookup_ctx): Add forward declaration.
	(omp_find_scan): Likewise.  Walk into body of simd if composited
	with worksharing loop.
	(scan_omp_simd_scan): New function.
	(scan_omp_1_stmt): Call it.
	(lower_rec_simd_input_clauses): Don't create rvar nor rvar2 if
	ctx->for_simd_scan_phase.
	(lower_rec_input_clauses): Do much less work for inscan reductions
	in ctx->for_simd_scan_phase is_simd regions.
	(lower_omp_scan): Set is_simd also on simd constructs composited
	with worksharing loop, unless ctx->for_simd_scan_phase.  Never emit
	a sorry message.  Don't change GIMPLE_OMP_SCAN stmts into nops and
	emit their body after in simd constructs composited with worksharing
	loop.
	(lower_omp_for_scan): Handle worksharing loop composited with simd.

	* omp-low.c (omp_find_scan): Make static.
	(lower_omp_for_scan): Fix order of merge arguments in input phase of
	the second loop, var2 represents the first partial sum and so needs
	to go before rprivb[ivar].

2019-07-05  Iain Sandoe  <iain@sandoe.co.uk>

	* config/rs6000/rs6000-logue.c: Remove unused code.

2019-07-05  Eric Botcazou  <ebotcazou@adacore.com>

	* tree-ssa-loop-manip.c (create_iv): Add missing guard for gsi_end_p.

2019-07-05  Sam Tebbs  <sam.tebbs@arm.com>

	PR target/90712
	* config/aarch64/aarch64.c (aarch64_post_cfi_startproc): Replace thunk
	check with a frame laid out check.

2019-07-05  Richard Biener  <rguenther@suse.de>

	* tree-ssa-sccvn.c (vn_reference_lookup_3): Valueize RHS
	when comparing against a store with possibly the same value.

2019-07-05  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91091
	* tree-ssa-alias.h (get_continuation_for_phi): Add tbaa_p parameter.
	(walk_non_aliased_vuses): Likewise.
	* tree-ssa-alias.c (maybe_skip_until): Pass down tbaa_p.
	(get_continuation_for_phi): New tbaa_p parameter and pass
	it down.
	(walk_non_aliased_vuses): Likewise.
	* ipa-prop.c (determine_known_aggregate_parts): Adjust.
	* tree-ssa-pre.c (translate_vuse_through_block): Likewise.
	* tree-ssa-scopedtables.c (avail_exprs_stack::lookup_avail_expr):
	Likewise.
	* tree-ssa-sccvn.c (struct vn_walk_cb_data): Add tbaa_p flag.
	(adjust_offsets_for_equal_base_address): New function.
	(vn_reference_lookup_3): Use it to catch more base equivalences.
	Handle and pass down tbaa_p flag.
	(vn_reference_lookup_pieces): Adjust.
	(vn_reference_lookup): Remove alias-set altering, instead pass
	down false as tbaa_p.

2019-07-05  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91091
	* tree-ssa-sccvn.c (vn_reference_lookup_3): Overlap of
	accesses can happen with -fno-strict-aliasing.

2019-07-05  Jan Hubicka  <hubicka@ucw.cz>

	* tree-ssa-alias.c (alias_stats): Add
	nonoverlapping_component_refs_since_match_p_must_overlap.
	(dump_alias_stats): Print it.
	(nonoverlapping_component_refs_since_match_p): Add early exit.
	(nonoverlapping_component_refs_p): Do not account early exit.

2019-07-05  Eric Botcazou  <ebotcazou@adacore.com>

	* except.c (emit_to_new_bb_before): Make sure to put a location on SEQ.
	* tree-eh.c (replace_goto_queue_1) <GIMPLE_GOTO>: Propagate location.
	(emit_eh_dispatch): Delete.
	(lower_catch): Emit the eh_dispatch manually and set the location of
	the first catch statement onto it.
	(lower_eh_filter): Emit the eh_dispatch manually and set location.
	(lower_eh_dispatch): Propagate location.
	* tree-outof-ssa.c (set_location_for_edge): Handle EH edges specially.
	(eliminate_build): Likewise.

2019-07-05  Eric Botcazou  <ebotcazou@adacore.com>

	* tree-cfg.c (gimple_make_forwarder_block): Propagate location info on
	phi nodes if possible.
	* tree-scalar-evolution.c (final_value_replacement_loop): Propagate
	location info on the newly created statement.
	* tree-ssa-loop-manip.c (create_iv): Propagate location info on the
	newly created increment if needed.

2019-07-04  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/78884
	* gimplify.c (struct gimplify_omp_ctx): Add add_safelen1 member.
	(gimplify_bind_expr): If seeing TREE_ADDRESSABLE VLA inside of simd
	loop body, set ctx->add_safelen1 instead of making it GOVD_PRIVATE.
	(gimplify_adjust_omp_clauses): Add safelen (1) clause if
	ctx->add_safelen1 is set.

	* omp-expand.c (expand_omp_for_static_nochunk): Don't emit
	GOMP_loop_start at the start of second worksharing loop in a scan.
	For nowait, don't emit GOMP_loop_end_nowait at the end of first
	worksharing loop in a scan even if there are conditional lastprivates,
	and do emit GOMP_loop_end_nowait at the end of second worksharing loop.

2019-07-04  Jan Hubicka  <jh@suse.cz>

	* tree-ssa-alias.c (nonoverlapping_component_refs_since_match_p):
	Fix check for match in the ref walk.

2019-07-04  Martin Liska  <mliska@suse.cz>

	* tree-ssa-loop-niter.c
	(get_upper_bound_based_on_builtin_expr_with_prob): New function.
	(estimate_numbers_of_iterations):
	Support __builtin_expect_with_probability for analysis
	of # of loop iterations.

2019-07-04  Alexandre Oliva  <oliva@adacore.com>

	* doc/generic.texi (Cleanups): Document EH_ELSE_EXPR.
	* except.c: Likewise.
	* expr.c (expand_expr_real_1): Reject it.
	* gimplify.c (gimplify_expr): Gimplify it, within
	TRY_FINALLY_EXPR.
	* tree-dump.c (dequeue_and_dump): Dump it.
	* tree-pretty-print.c (dump_generic_node): Likewise.
	* tree.c (block_may_fallthru): Handle it.
	* tree.def (EH_ELSE_EXPR): Introduce it.
	* gimple-pretty-print.c (dump_gimple_try): Dump TRY_FINALLY
	with GIMPLE_EH_ELSE as try/finally/else.

2019-07-04  Richard Biener  <rguenther@suse.de>

	PR ipa/91062
	* tree-pass.h (execute_all_ipa_transforms): Add a flag
	parameter whether to disable GC collection.
	* passes.c (execute_one_ipa_transform_pass): Likewise, and
	honor it.
	(execute_all_ipa_transforms): Likewise and pass it down.
	* cgraph.c (cgraph_node::get_body): Do not invoke garbage
	collection from applying IPA transforms.
	* cgraphunit.c (cgraph_node::expand): Allow garbage collection
	from applying IPA transforms.

2019-07-04  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/90911
	* tree-vectorizer.h (_loop_vec_info::scalar_loop_scaling): New field.
	(LOOP_VINFO_SCALAR_LOOP_SCALING): new.
	* tree-vect-loop.c (_loop_vec_info::_loop_vec_info): Initialize
	scalar_loop_scaling.
	(vect_transform_loop): Scale scalar loop profile if needed.
	* tree-vect-loop-manip.c (vect_loop_versioning): When re-using
	the loop copy from if-conversion adjust edge probabilities
	and scale the vectorized loop body profile, queue the scalar
	profile for updating after peeling.

2019-07-04  Jan Hubicka  <jh@suse.cz>

	* tree-ssa-alias.c (decl_refs_may_alias_p): Add size1 and size2
	parameters; return early for must-alias.
	(indirect_ref_may_alias_decl_p): Likewise; when establishing
	outer types match, try nonoverlapping_component_refs
	if must-alias is not obvious.
	(indirect_refs_may_alias_p): Likewise.
	(refs_may_alias_p_2): Likewise.

2019-07-04  Richard Biener  <rguenther@suse.de>

	* tree-ssa-sccvn.h (vn_reference_lookup): Add last_vuse_ptr
	argument.
	* tree-ssa-sccvn.c (last_vuse_ptr, vn_walk_kind): Move
	globals into...
	(struct vn_walk_cb_data): New callback data struct.
	(vn_reference_lookup_2): Adjust.
	(vn_reference_lookup_3): Likewise.
	(vn_reference_lookup_pieces): Likewise.
	(vn_reference_lookup): Likewise, get last_vuse_ptr argument.
	(visit_reference_op_load): Adjust.

2019-07-04  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/91063
	* tree-vect-stmts.c (vect_init_vector): Call gsi_remove to remove
	stmt from stmts sequence before calling vect_init_vector_1.
	Formatting fix.

2019-07-04  Prathamesh Kulkarni  <prathamesh.kulkarni@linaro.org>

	PR target/88833
	* fwprop.c (reg_single_def_p): New function.
	(propagate_rtx_1): Add unconditional else inside RTX_EXTRA case.
	(forward_propagate_into): New parameter reg_prop_only
	with default value false.
	Propagate def's src into loop only if SET_SRC and SET_DEST
	of def_set have single definitions.
	Likewise if reg_prop_only is set to true.
	(fwprop): New param fwprop_addr_p.
	Integrate fwprop_addr into fwprop.
	(fwprop_addr): Remove.
	(pass_rtl_fwprop_addr::execute): Call fwprop with arg set
	to true.
	(pass_rtl_fwprop::execute): Call fwprop with arg set to false.
	* simplify-rtx.c (simplify_subreg): Add case for vector comparison.
	* config/i386/sse.md (UNSPEC_BLENDV): Adjust pattern.

2019-07-04  Jakub Jelinek  <jakub@redhat.com>

	* omp-low.c (lower_omp_scan): Call lower_omp on stmt's body
	in worksharing loop scans.

	PR tree-optimization/91074
	* omp-low.c (lower_omp_for_scan): Set DECL_GIMPLE_REG_P on cplx
	temporary.

	PR rtl-optimization/90756
	* explow.c (promote_ssa_mode): Always use TYPE_MODE, don't bypass it
	for VECTOR_TYPE_P.

2019-07-03  Dennis Zhang  <dennis.zhang@arm.com>

	* config/aarch64/aarch64.md: Remove redundant constraints from
	define_expand but keep some patterns untouched if they are
	specially selected by TARGET_SECONDARY_RELOAD hook.
	* config/aarch64/aarch64-sve.md: Likewise.
	* config/aarch64/atomics.md: Remove redundant constraints from
	define_expand.
	* config/aarch64/aarch64-simd.md: Likewise.

2019-07-03  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin.h (DRIVER_SELF_SPECS): Remove the linker cases.
	(RDYNAMIC): Rename to, DARWIN_RDYNAMIC.
	(DARWIN_PIE_SPEC, DARWIN_NOPIE_SPEC): Adjust to remove the Xlinker
	clauses.
	(LINK_COMMAND_SPEC_A): Add DARWIN_RDYNAMIC, DARWIN_PIE_SPEC and
	DARWIN_NOPIE_SPEC.

2019-07-03  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin.h (REAL_LIBGCC_SPEC): Adjust for earlier Darwin.
	(STARTFILE_SPEC): Split crt3 into a separate spec.
	(DARWIN_EXTRA_SPECS): Add crt2 and crt3 spec.
	(DARWIN_CRT2_SPEC): New.
	(DARWIN_CRT3_SPEC): New.
	(MIN_LD64_OMIT_STUBS): Revise to 62.1.
	* config/rs6000/darwin.h (DARWIN_CRT2_SPEC): Revise conditions.
	(DARWIN_CRT3_SPEC): New.

2019-07-03  Michael Meissner  <meissner@linux.ibm.com>

	* config/rs6000/altivec.md (altivec_mov<mode>, VM2 iterator):
	Change the RTL attribute "length" from "4" to "*" to allow the
	length attribute to be adjusted automatically for prefixed load,
	store, and add immediate instructions.
	* config/rs6000/rs6000.md (extendhi<mode>2, EXTHI iterator):
	Likewise.
	(extendsi<mode>2, EXTSI iterator): Likewise.
	(movsi_internal1): Likewise.
	(movsi_from_sf): Likewise.
	(movdi_from_sf_zero_ext): Likewise.
	(mov<mode>_internal): Likewise.
	(movcc_internal1, QHI iterator): Likewise.
	(mov<mode>_softfloat, FMOVE32 iterator): Likewise.
	(movsf_from_si): Likewise.
	(mov<mode>_hardfloat32, FMOVE64 iterator): Likewise.
	(mov<mode>_softfloat64, FMOVE64 iterator): Likewise.
	(mov<mode>, FMOVE128 iterator): Likewise.
	(movdi_internal64): Likewise.
	* config/rs6000/vsx.md (vsx_le_permute_<mode>, VSX_TI iterator):
	Likewise.
	(vsx_le_undo_permute_<mode>, VSX_TI iterator): Likewise.
	(vsx_mov<mode>_64bit, VSX_M iterator): Likewise.
	(vsx_mov<mode>_32bit, VSX_M iterator): Likewise.
	(vsx_splat_v4sf): Likewise.

2019-07-03  Mark Wielaard  <mark@klomp.org>

	PR debug/90981
	* dwarf2out.c (add_top_level_skeleton_die_attrs): Only add
	DW_AT_addr_base if there is actually a .debug_addr section with
	addresses.
	(output_addr_table): Add DWARF5 table header generation here after
	checking there are actually any addresses from...
	(dwarf2out_finish): ...here.

2019-07-03  Richard Biener  <rguenther@suse.de>

	PR middle-end/91069
	* match.pd (vec_perm -> bit_insert): Fix element read from
	first vector.

2019-07-03  Martin Liska  <mliska@suse.cz>

	* dbgcnt.def (DEBUG_COUNTER): Add match debug counter.
	* genmatch.c (dt_simplify::gen_1): Generate dbgcnt
	condition.
	* generic-match-head.c: Include dbgcnt.h.
	* gimple-match-head.c: Likewise.

2019-07-03  Martin Liska  <mliska@suse.cz>

	* gcov-counter.def (GCOV_COUNTER_V_SINGLE): Remove.
	(GCOV_COUNTER_V_TOPN): New.
	(GCOV_COUNTER_V_INDIR): Use _topn.
	* gcov-io.h (GCOV_DISK_SINGLE_VALUES): Remove.
	(GCOV_TOPN_VALUES): New.
	(GCOV_SINGLE_VALUE_COUNTERS): Remove.
	(GCOV_TOPN_VALUES_COUNTERS): New.
	* profile.c (instrument_values): Use HIST_TYPE_TOPN_VALUES.
	* tree-profile.c:
	(gimple_init_gcov_profiler): Rename variables from one_value
	to topn_values.
	(gimple_gen_one_value_profiler): Remove.
	(gimple_gen_topn_values_profiler): New function.
	* value-prof.c (dump_histogram_value): Use TOPN_VALUES
	names instead of SINGLE_VALUE.
	(stream_out_histogram_value): Likewise.
	(stream_in_histogram_value): Likewise.
	(get_most_common_single_value): Likewise.
	(gimple_divmod_fixed_value_transform): Likewise.
	(gimple_stringops_transform): Likewise.
	(gimple_divmod_values_to_profile): Likewise.
	(gimple_stringops_values_to_profile): Likewise.
	(gimple_find_values_to_profile): Likewise.
	* value-prof.h (enum hist_type): Rename to TOPN.
	(gimple_gen_one_value_profiler): Remove.
	(gimple_gen_topn_values_profiler): New.

2019-07-03  Eric Botcazou  <ebotcazou@adacore.com>

	* dwarf2out.c (add_scalar_info): Add back refererence to existing DIE
	if it has the DW_AT_data_member_location attribute.

2019-07-03  Richard Biener  <rguenther@suse.de>

	* gimple-pretty-print.c (dump_ternary_rhs): Fix BIT_INSERT_EXPR
	dumping.

2019-07-03  Sylvia Taylor  <sylvia.taylor@arm.com>

	* config/aarch64/aarch64.md (FP_REGNUM): New constant.
	(tlsdesc_small_advsimd_<mode>): Add use of FP_REGNUM.
	(tlsdesc_small_sve_<mode>): Likewise.

2019-07-03  Martin Liska  <mliska@suse.cz>

	* Makefile.in: Define ZSTD_LIB.
	* common.opt: Adjust compression level
	to support also zstd levels.
	* config.in: Regenerate.
	* configure: Likewise.
	* configure.ac: Add --with-zstd and --with-zstd-include options
	and detect ZSTD.
	* doc/install.texi: Mention zstd dependency.
	* gcc.c: Print supported LTO compression algorithms.
	* lto-compress.c (lto_normalized_zstd_level): Likewise.
	(lto_compression_zstd): Likewise.
	(lto_uncompression_zstd): Likewise.
	(lto_end_compression): Dispatch in between zlib and zstd.
	(lto_compression_zlib): Mark with ATTRIBUTE_UNUSED.
	(lto_uncompression_zlib): Make it static.
	* lto-compress.h (lto_end_uncompression): Fix GNU coding style.
	* lto-section-in.c (lto_get_section_data): Pass info
	about used compression.
	* lto-streamer-out.c: By default use zstd when possible.
	* timevar.def (TV_IPA_LTO_DECOMPRESS): Rename to decompression
	(TV_IPA_LTO_COMPRESS): Likewise for compression.

2019-07-03  Martin Liska  <mliska@suse.cz>

	* lto-section-in.c (lto_get_section_data): Add "lto" section.
	* lto-section-out.c (lto_destroy_simple_output_block): Never
	compress LTO_section_lto section.
	* lto-streamer-out.c (produce_asm): Do not set major_version
	and minor_version.
	(lto_output_toplevel_asms): Likewise.
	(produce_lto_section): New function.
	(lto_output): Call produce_lto_section.
	(lto_write_mode_table): Do not set major_version and
	minor_version.
	(produce_asm_for_decls): Likewise.
	* lto-streamer.h (enum lto_section_type): Add LTO_section_lto
	type.
	(struct lto_header): Remove.
	(struct lto_section): New struct.
	(struct lto_simple_header): Do not inherit from lto_header.
	(struct lto_file_decl_data): Add lto_section_header field.

2019-07-03  Martin Liska  <mliska@suse.cz>

	* lra-eliminations.c (eliminate_regs_in_insn): Remove
	dead assignemts.
	* reg-stack.c (check_asm_stack_operands): Likewise.
	* tree-ssa-structalias.c (create_function_info_for): Likewise.
	* tree-vect-generic.c (expand_vector_operations_1): Likewise.
	* config/i386/i386-expand.c (ix86_expand_sse2_mulvxdi3): Use
	force_expand_binop.

2019-07-03  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/90892
	* builtins.c (inline_expand_builtin_string_cmp): Handle '\0'
	in string constants.

2019-07-03  Martin Liska  <mliska@suse.cz>

	PR middle-end/90899
	* multiple_target.c (create_dispatcher_calls): Add to comdat
	group only if set for ifunc.

2019-07-03  Martin Liska  <mliska@suse.cz>

	PR target/88056
	* config/i386/host-mingw32.c (mingw32_gt_pch_use_address):
	Define local_object_name in outer scope in order to handle
	use-after-scope issue.

2019-07-03  Martin Liska  <mliska@suse.cz>

	* common.opt: Add fprofile-note.
	* coverage.c (coverage_init): Append the option
	to bbg_file_name.
	* doc/invoke.texi: Document -fprofile-note.

2019-07-03  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/91033
	* tree-vectorizer.h (vect_mark_stmts_to_be_vectorized,
	vect_analyze_data_refs): Add bool * arguments.
	* tree-vect-data-refs.c (vect_analyze_data_refs): Add fatal argument,
	if failure is due to scatter/gather, set *fatal to false if non-NULL.
	* tree-vect-stmts.c (vect_mark_stmts_to_be_vectorized): Likewise.
	* tree-vect-loop.c (vect_analyze_loop_2): Adjust
	vect_mark_stmts_to_be_vectorized and vect_analyze_data_refs callers.
	* tree-vect-slp.c (vect_slp_analyze_bb_1): Adjust
	vect_analyze_data_refs caller.

	* tree-core.h (enum omp_clause_code): Add OMP_CLAUSE__SCANTEMP_
	clause.
	* tree.h (OMP_CLAUSE_DECL): Use OMP_CLAUSE__SCANTEMP_ instead of
	OMP_CLAUSE__CONDTEMP_ as range's upper bound.
	(OMP_CLAUSE__SCANTEMP__ALLOC, OMP_CLAUSE__SCANTEMP__CONTROL): Define.
	* tree.c (omp_clause_num_ops, omp_clause_code_name): Add
	OMP_CLAUSE__SCANTEMP_ entry.
	(walk_tree_1): Handle OMP_CLAUSE__SCANTEMP_.
	* tree-pretty-print.c (dump_omp_clause): Likewise.
	* tree-nested.c (convert_nonlocal_omp_clauses,
	convert_local_omp_clauses): Likewise.
	* omp-general.h (struct omp_for_data): Add have_scantemp and
	have_nonctrl_scantemp members.
	* omp-general.c (omp_extract_for_data): Initialize them.
	* omp-low.c (struct omp_context): Add scan_exclusive member.
	(scan_omp_1_stmt): Don't unnecessarily mask gimple_omp_for_kind
	result again with GF_OMP_FOR_KIND_MASK.  Initialize also
	ctx->scan_exclusive.
	(lower_rec_simd_input_clauses): Use ctx->scan_exclusive instead
	of !ctx->scan_inclusive.
	(lower_rec_input_clauses): Simplify gimplification of dtors using
	gimplify_and_add.  For non-is_simd test OMP_CLAUSE_REDUCTION_INSCAN
	rather than rvarp.  Handle OMP_CLAUSE_REDUCTION_INSCAN in worksharing
	loops.  Don't add barrier for reduction_omp_orig_ref if
	ctx->scan_??xclusive.
	(lower_reduction_clauses): Don't do anything for ctx->scan_??xclusive.
	(lower_omp_scan): Use ctx->scan_exclusive instead
	of !ctx->scan_inclusive.  Handle worksharing loops with inscan
	reductions.  Use new_vard != new_var instead of repeated
	omp_is_reference calls.
	(omp_find_scan, lower_omp_for_scan): New functions.
	(lower_omp_for): Call lower_omp_for_scan for worksharing loops with
	inscan reductions.
	* omp-expand.c (expand_omp_scantemp_alloc): New function.
	(expand_omp_for_static_nochunk): Handle fd->have_nonctrl_scantemp
	and fd->have_scantemp.

	* gimplify.c (gimplify_scan_omp_clauses): For inscan reductions
	on worksharing loop propagate it as shared clause to containing
	combined parallel.

	* omp-expand.c (expand_omp_for_static_nochunk,
	expand_omp_for_static_chunk): For nowait worksharing loop with
	conditional lastprivate clause(s), emit GOMP_loop_end_nowait call
	at the end.

2019-07-02  qing zhao  <qing.zhao@oracle.com>

	PR preprocessor/90581
	* doc/cppopts.texi: Add document for -fmax-include-depth.
	* doc/invoke.texi (Preprocessor Options): List -fmax-include-depth.

2019-07-02  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/mmx.md (mmx_pack<s_trunsuffix>swb):
	Use TARGET_SSE2 && SSE_REGNO_P in split condition.
	(mmx_packssdw): Ditto.
	(mmx_punpckhbw): Ditto.
	(mmx_punpcklbw): Ditto.
	(mmx_punpckhwd): Ditto.
	(mmx_punpcklwd): Ditto.
	(mmx_punpckhdq): Ditto.
	(mmx_punpckldq): Ditto.
	(*vec_dupv4hi): Ditto.
	(*vec_dupv2si): Ditto.
	(mmx_pmovmskb): Ditto.
	* config/i386/sse.md (sse_cvtpi2ps): Use
	TARGET_SSE2 && SSE_REG_P in split condition.
	(ssse3_ph<plusminus_mnemonic>wv4hi3): Use
	TARGET_SSSE3 && SSE_REGNO_P in split condition.
	(ssse3_ph<plusminus_mnemonic>dv2si3): Ditto.
	(ssse3_pshufbv8qi3): Ditto.
	(ssse3_palignrdi): Ditto.

2019-07-02  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn.md (movdi_symbol_save_scc): Convert to define_insn
	with inlined save and restore.

2019-07-02  Eric Botcazou  <ebotcazou@adacore.com>

	* cfgexpand.c (pass_expand::execute): Deal specially with instructions
	to be inserted on single successor edge of the entry block.  Then call
	commit_edge_insertions instead of inserting the instructions manually.
	* cfgrtl.c (commit_edge_insertions): Do not verify flow info during
	RTL expansion and rebuild jump labels chain.

2019-07-02  Richard Biener  <rguenther@suse.de>

	* tree-core.h (enum tree_index): Add TI_CHREC_DONT_KNOW and
	TI_CHREC_KNOWN.
	* tree.h (chrec_not_analyzed_yet, chrec_dont_know, chrec_known):
	Define here.
	* tree.c (build_common_tree_nodes): Initialize them.
	* tree-chrec.h (chrec_not_analyzed_yet, chrec_dont_know, chrec_known):
	Make declarations comments.
	* tree-scalar-evolution.c (chrec_not_analyzed_yet, chrec_dont_know,
	chrec_known): Remove definitions.
	(initialize_scalar_evolutions_analyzer): Remove.
	(scev_initialize): Do not call initialize_scalar_evolutions_analyzer.
	* tree-streamer.c (preload_common_nodes): Do not preload
	TI_CHREC_DONT_KNOW or TI_CHREC_KNOWN.

2019-07-02  Jan Hubicka  <jh@suse.cz>

	* tree-ssa-alias.c (aliasing_component_refs_p): Remove forgotten
	sanity check.

2019-07-02  Jan Hubicka  <jh@suse.cz>

	* tree-ssa-alias.c (nonoverlapping_component_refs_for_decl_p): Rename
	to ..
	(nonoverlapping_component_refs_since_match_p): ... this one;
	handle also non-decl bases; return -1 if search gave up.
	(alias_stats): Rename nonoverlapping_component_refs_of_decl_p_may_alias,
	nonoverlapping_component_refs_of_decl_p_no_alias to
	nonoverlapping_component_refs_since_match_p_may_alias,
	nonoverlapping_component_refs_since_match_p_no_alias.
	(dump_alias_stats): Update dumping.
	(aliasing_matching_component_refs_p): Break out from ...;
	dispatch to nonoverlapping_component_refs_for_decl_p
	and nonoverlapping_component_refs_since_match_p.
	(aliasing_component_refs_p): ... here; call
	nonoverlapping_component_refs_p in scenarios where we can not
	precisely determine base match.
	(decl_refs_may_alias_p): Use
	nonoverlapping_component_refs_since_match_p.
	(indirect_ref_may_alias_decl_p): Do not call
	nonoverlapping_component_refs_p.
	(indirect_refs_may_alias_p): Likewise.

2019-07-02  Jan Hubicka  <jh@suse.cz>

	* tree-inline.c (remap_gimple_stmt): Do not subtitute handled components
	to clobber of return value.

2019-07-02  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/arm/cortex-a57.md (cortex_a57_neon_type): Use neon_arith_basic
	for is_neon_type instructions that have not already been categorized.

2019-07-02  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/58483
	* tree-ssa-scopedtables.c (avail_expr_hash): Use OEP_ADDRESS_OF
	for MEM_REF base hashing.
	(equal_mem_array_ref_p): Likewise for base comparison.

2019-07-01  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (signbit<mode>2_dm): Make this a
	parameterized name.
	(signbit<mode>2): Use that name.  Simplify.

2019-07-01  Joern Rennecke  <joern.rennecke@riscy-ip.com>

	PR middle-end/66726
	* tree-ssa-phiopt.c (factor_out_conditional_conversion):
	Tune heuristic from PR71016 to allow MIN / MAX.

2019-07-01  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (ieee_128bit_vsx_abs<mode>2): Make this a
	parameterized name.
	(abs<mode>2): Use that name.  Simplify.

2019-07-01  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (ieee_128bit_vsx_neg<mode>2): Make this a
	parameterized name.
	(neg<mode>2): Use that name.  Simplify.

2019-07-01  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (abs<mode>2_hw): Make this a parameterized
	name.
	(abs<mode>2): Use that name.  Simplify.

2019-07-01  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (neg<mode>2_hw): Make this a parameterized
	name.
	(neg<mode>2): Use that name.  Simplify.

2019-07-01  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md ("isa" attribute): Add sse_noavx.
	("enabled" attribute): Handle sse_noavx isa attribute.
	* config/i386/mmx.md (*vec_dupv2sf): Add "isa" attribute.
	Use TARGET_SSE && SSE_REGNO_P in split condition.
	(*vec_dupv2sf): Ditto.

2019-07-01  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (extenddf<mode>2): Make this a parameterized
	name.
	(floatsi<mode>2): Use that name.  Simplify.

2019-07-01  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (extenddf<mode>2_fprs): Make this a
	parameterized name.
	(extenddf<mode>2_vsx): Make this a parameterized name.
	(extenddf<mode>2): Use those names.  Simplify.

2019-07-01  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (eh_set_lr_<mode>): Make this a parameterized
	name.
	(eh_return): Use that name.  Simplify.

2019-07-01  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (ctr<mode>): Make this a parameterized name.
	(doloop_end): Use that name.  Simplify.

2019-07-01  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (indirect_jump<mode>_nospec): Make this a
	parameterized name.
	(indirect_jump): Use that name.  Simplify.

2019-07-01  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (abs<mode>2_internal): Make this a
	parameterized name.
	(abs<mode>2): Use that name.  Simplify.

2019-07-01  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (fix_trunc<mode>si2_fprs): Make this a
	parameterized name.
	(fix_trunc<mode>si2): Use that name.  Simplify.

2019-07-01  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (neg<mode>2): Make this a parameterized name.
	(allocate_stack): Use that name.  Simplify.

2019-07-01  Martin Sebor  <msebor@redhat.com>

	PR middle-end/90923
	* hash-map.h (hash_map::put): On insertion invoke element ctor.
	(hash_map::get_or_insert): Same.  Reformat comment.
	* hash-set.h (hash_set::add): On insertion invoke element ctor.
	* hash-map-tests.c (test_map_of_type_with_ctor_and_dtor): New.
	* hash-set-tests.c (test_map_of_type_with_ctor_and_dtor): New.
	* hash-table.h (hash_table::operator=): Prevent copy assignment.
	 (hash_table::hash_table (const hash_table&)): Use copy ctor
	 instead of assignment to copy elements.

2019-07-01  Wilco Dijkstra  <wdijkstr@arm.com>
	    John David Anglin  <danglin@gcc.gnu.org>

	PR target/90963
	* config/pa/pa.md (builtin_longjmp): Restore hard_frame_pointer_rtx
	using saved frame pointer.

2019-07-01  Eric Botcazou  <ebotcazou@adacore.com>

	PR middle-end/64242
	* config/sparc/sparc.md (nonlocal_goto): Restore frame pointer last.
	Add frame clobber and schedule blockage.

2019-07-01  Sandra Loosemore  <sandra@codesourcery.com>

	* doc/invoke.texi (Link Options): Further editorial changes to
	-flinker-output docs.

2019-07-01  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.c (rs6000_force_indexed_or_indirect_mem):
	Load both operands of a PLUS into registers separately.

2019-07-01  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/vector.md: Fix shift count operand printing.

2019-07-01  Richard Sandiford  <richard.sandiford@arm.com>

	* ira-lives.c (process_bb_node_lives): Use ira_setup_alts.

2019-07-01  Richard Sandiford  <richard.sandiford@arm.com>

	* ira.c (ira_get_dup_out_num): Don't punt for earlyclobbers.
	Use recog_data to test for an output operand.

2019-07-01  Richard Sandiford  <richard.sandiford@arm.com>

	* ira.c (ira_setup_alts): If any valid alternatives have zero cost,
	exclude any others that are disparaged or that are bound to need
	a reload or spill.
	(ira_get_dup_out_num): Expand comment.

2019-07-01  Richard Sandiford  <richard.sandiford@arm.com>

	* ira.c (ira_setup_alts): Use preprocess_constraints to get the
	constraint string for each operand/alternative combo.  Only handle
	'%' at the start of constraint strings, and look for it outside
	the main loop.

2019-07-01  Richard Sandiford  <richard.sandiford@arm.com>

	* ira-int.h (ira_setup_alts, ira_get_dup_out_num): Use
	alternative_mask instead of HARD_REG_SET to represent a
	bitmask of alternatives.
	* ira.c (ira_setup_alts, ira_get_dup_out_num): Likewise.
	* ira-conflicts.c (add_insn_allocno_copies): Likewise.

2019-07-01  Martin Liska  <mliska@suse.cz>

	* edit-context.c (test_applying_fixits_unreadable_file): Do not
	use () for a constructor call.
	(test_applying_fixits_line_out_of_range): Likewise.
	* ggc-page.c (alloc_page): Use (void *) for %p printf format
	argument.
	(free_page): Likewise.

2019-07-01  Vladislav Ivanishin  <vlad@ispras.ru>

	* gdbhooks.py (GdbPrettyPrinters.add_printer_for_types): Reorder
	parameter names to match usage (no functional change).
	(GdbPrettyPrinters.add_printer_for_regex): Ditto.

2019-07-01  Richard Biener  <rguenther@suse.de>

	* tree-ssa-sccvn.c (class pass_fre): Add may_iterate
	pass parameter.
	(pass_fre::execute): Honor it.
	* passes.def: Adjust pass_fre invocations to allow iterating,
	add non-iterating pass_fre before late threading/dom.

2019-07-01  Richard Biener  <rguenther@suse.de>

	* tree-ssa-sccvn.c (copy_reference_ops_from_ref): Adjust
	TARGET_MEM_REF handling to also handle address-taken ones.

2019-07-01  Hongtao Liu  <hongtao.liu@intel.com>

	* doc/sourcebuild.texi (Effective-Target Keywords, Other
	hardware attributes): Document avx512vp2intersect.

2019-06-30  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/sse.md (ssse3_abs<mode>2): Rename from abs<mode>2.
	(abs<mode>2): New expander.
	* config/i386/i386-builtin.def (__builtin_ia32_pabsb):
	Use CODE_FOR_ssse3_absv8qi2.
	(__builtin_ia32_pabsw): Use CODE_FOR_ssse3_absv4hi2.
	(__builtin_ia32_pabsd): Use CODE_FOR_ssse3_absv2si2.

2019-06-30  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (mmx_isa): Rename x64, x64_noavx and x64_avx
	to sse, sse_noavx and avx.  Update all uses.

2019-06-30  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/mmx.md (sse_movntq): Add "isa" attribute.
	(*mmx_<plusminus_insn><mode>3): Ditto.
	(*mmx_mulv4hi3"): Ditto.
	(*mmx_smulv4hi3_highpart): Ditto.
	(*mmx_umulv4hi3_highpart): Ditto.
	(*mmx_pmaddwd): Ditto.
	(*sse2_umulv1siv1di3): Ditto.
	(*mmx_<code>v4hi3): Ditto.
	(*mmx_<code>v8qi3): Ditto.
	(mmx_ashr<mode>3): Ditto.
	("mmx_<shift_insn><mode>3): Ditto.
	(*mmx_eq<mode>3): Ditto.
	(mmx_gt<mode>3): Ditto.
	(mmx_andnot<mode>3): Ditto.
	(*mmx_<code><mode>3): Ditto.
	(*mmx_pinsrw): Ditto.
	(*mmx_pextrw): Ditto.
	(mmx_pshufw_1): Ditto.
	(*mmx_uavgv8qi3): Ditto.
	(*mmx_uavgv4hi3): Ditto.
	("mmx_psadbw): Ditto.
	* config/i386/sse.md (sse_cvtps2pi): Ditto.
	(sse_cvttps2pi): Ditto.
	(ssse3_pmaddubsw): Ditto.
	(*ssse3_pmulhrswv4hi3): Ditto.
	(ssse3_psign<mode>3): Ditto.

2019-06-29  Eric Botcazou  <ebotcazou@adacore.com>

	* expr.c (expand_expr_real_1) <BIT_FIELD_REF>: Apply the big-endian
	adjustment for bit-fields to all aggregate types.

2019-06-28   Michael Meissner  <meissner@linux.ibm.com>

	* config/rs6000/predicates.md (pcrel_address): Use
	SYMBOL_REF_LOCAL_P to determine if a label is local.
	(pcrel_external_address): New predicate.
	(non_prefixed_mem_operand): Delete, predicate not used.
	* config/rs6000/rs6000.h (SYMBOL_FLAG_PCREL_P): Delete, we now use
	SYMBOL_REF_LOCAL_P to determine if we can use pc-relative
	addressing.
	(SYMBOL_REF_PCREL_P): Likewise.

	PR target/91009
	* config/rs6000/rs6000.md (floatsi<mode>2_lfiwax): Add non-VSX
	alternative.
	(floatsi<mode>2_lfiwax_mem): Add non-VSX alternative.
	(floatunssi<mode>2_lfiwzx): Add non-VSX alternative.
	(floatunssi<mode>2_lfiwzx_mem): Add non-VSX alternative.

2019-06-28  Iain Sandoe  <iain@sandoe.co.uk>

	* config.gcc (powerpc-*-darwin*, powerpc64-*-darwin*): Remove
	override on extra_headers.

2019-06-28  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin-c.c (pop_field_alignment): Quote #pragma options.
	* config/darwin-driver.c (darwin_default_min_version): Remove newline
	from warning.
	(darwin_driver_init): Likewise.

2019-06-28  Jan Beulich  <jbeulich@suse.com>

	* config/i386/sse.md (vgf2p8affineinvqb_<mode><mask_name>,
	vgf2p8affineqb_<mode><mask_name>, vgf2p8mulb_<mode><mask_name>):
	Eliminate redundant alternative.

2019-06-28  Jan Beulich  <jbeulich@suse.com>

	* config/i386/sse.md (vgf2p8affineinvqb_<mode><mask_name>,
	vgf2p8affineqb_<mode><mask_name>): Drop % constraint modifier.
	Use vector_operand.

2019-06-28  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.c (arc_rtx_costs): All short instructions are
	having a lower cost regardless of the speed option.

2019-06-28  Jan Beulich  <jbeulich@suse.com>

	* config/i386/sse.md (sse2_cvtpd2pi, sse2_cvttpd2pi): Use
	vector_operand plus, on both alternatives, "Bm" constraint.

2019-06-28  Dennis Zhang  <dennis.zhang@arm.com>

	* config/arm/arm.md: Remove redundant constraints from
	define_expand but leave reload_inm and reload_outm patterns
	untouched since they need special constraints to work.
	* config/arm/arm-fixed.md: Remove redundant constraints from
	define_expand.
	* config/arm/iwmmxt.md: Likewise.
	* config/arm/neon.md: Likewise.
	* config/arm/sync.md: Likewise.
	* config/arm/thumb1.md: Likewise.
	* config/arm/vec-common.md: Likewise.

2019-06-27  Ilia Diachkov  <ilia.diachkov@optimitech.com>

	* doc/install.texi: Document --disable-tm-clone-registry.

2019-06-27  Jakub Jelinek  <jakub@redhat.com>

	PR c++/91024
	* gimplify.c (collect_fallthrough_labels): Ignore GIMPLE_PREDICT
	statements.

	PR tree-optimization/91010
	* tree-vect-stmts.c (scan_operand_equal_p): If offset1 == offset2,
	return true.  Otherwise, don't call operand_equal_p if offset1 or
	offset2 is NULL and just return false.

2019-06-27  Iain Sandoe  <iain@sandoe.co.uk>

	* config/rs6000/rs6000.c (darwin_rs6000_override_options): Honour
	user-specified float mode choice for kernel mode code.

2019-06-27  Iain Sandoe  <iain@sandoe.co.uk>

	* config/rs6000/darwin.h (ENDFILE_SPEC): Correct whitespace in the
	spec.

2019-06-27  Iain Sandoe  <iain@sandoe.co.uk>

	* config/rs6000/rs6000.c (darwin_rs6000_override_options): Do not
	use longcall for 64b code.

2019-06-27  Aaron Sawdey  <acsawdey@linux.ibm.com>

	* builtins.c (get_memory_rtx): Fix comment.
	* optabs.def (movmem_optab): Change to cpymem_optab.
	* expr.c (emit_block_move_via_cpymem): Change movmem to cpymem.
	(emit_block_move_hints): Change movmem to cpymem.
	* defaults.h: Change movmem to cpymem.
	* targhooks.c (get_move_ratio): Change movmem to cpymem.
	(default_use_by_pieces_infrastructure_p): Ditto.
	* config/aarch64/aarch64-protos.h: Change movmem to cpymem.
	* config/aarch64/aarch64.c (aarch64_expand_movmem): Change movmem
	to cpymem.
	* config/aarch64/aarch64.h: Change movmem to cpymem.
	* config/aarch64/aarch64.md (movmemdi): Change name to cpymemdi.
	* config/alpha/alpha.h: Change movmem to cpymem in comment.
	* config/alpha/alpha.md (movmemqi, movmemdi, *movmemdi_1): Change
	movmem to cpymem.
	* config/arc/arc-protos.h: Change movmem to cpymem.
	* config/arc/arc.c (arc_expand_movmem): Change movmem to cpymem.
	* config/arc/arc.h: Change movmem to cpymem in comment.
	* config/arc/arc.md (movmemsi): Change movmem to cpymem.
	* config/arm/arm-protos.h: Change movmem to cpymem in names.
	* config/arm/arm.c (arm_movmemqi_unaligned, arm_gen_movmemqi,
	gen_movmem_ldrd_strd, thumb_expand_movmemqi) Change movmem to cpymem.
	* config/arm/arm.md (movmemqi): Change movmem to cpymem.
	* config/arm/thumb1.md (movmem12b, movmem8b): Change movmem to cpymem.
	* config/avr/avr-protos.h: Change movmem to cpymem.
	* config/avr/avr.c (avr_adjust_insn_length, avr_emit_movmemhi,
	avr_out_movmem): Change movmem to cpymem.
	* config/avr/avr.md (movmemhi, movmem_<mode>, movmemx_<mode>):
	Change movmem to cpymem.
	* config/bfin/bfin-protos.h: Change movmem to cpymem.
	* config/bfin/bfin.c (single_move_for_movmem, bfin_expand_movmem):
	Change movmem to cpymem.
	* config/bfin/bfin.h: Change movmem to cpymem in comment.
	* config/bfin/bfin.md (movmemsi): Change name to cpymemsi.
	* config/c6x/c6x-protos.h: Change movmem to cpymem.
	* config/c6x/c6x.c (c6x_expand_movmem): Change movmem to cpymem.
	* config/c6x/c6x.md (movmemsi): Change name to cpymemsi.
	* config/frv/frv.md (movmemsi): Change name to cpymemsi.
	* config/ft32/ft32.md (movmemsi): Change name to cpymemsi.
	* config/h8300/h8300.md (movmemsi): Change name to cpymemsi.
	* config/i386/i386-expand.c (expand_set_or_movmem_via_loop,
	expand_set_or_movmem_via_rep, expand_movmem_epilogue,
	expand_setmem_epilogue_via_loop, expand_set_or_cpymem_prologue,
	expand_small_cpymem_or_setmem,
	expand_set_or_cpymem_prologue_epilogue_by_misaligned_moves,
	expand_set_or_cpymem_constant_prologue,
	ix86_expand_set_or_cpymem): Change movmem to cpymem.
	* config/i386/i386-protos.h: Change movmem to cpymem.
	* config/i386/i386.h: Change movmem to cpymem in comment.
	* config/i386/i386.md (movmem<mode>): Change name to cpymem.
	(setmem<mode>): Change expansion function name.
	* config/lm32/lm32.md (movmemsi): Change name to cpymemsi.
	* config/m32c/blkmov.md (movmemhi, movmemhi_bhi_op, movmemhi_bpsi_op,
	movmemhi_whi_op, movmemhi_wpsi_op): Change movmem to cpymem.
	* config/m32c/m32c-protos.h: Change movmem to cpymem.
	* config/m32c/m32c.c (m32c_expand_movmemhi): Change movmem to cpymem.
	* config/m32r/m32r.c (m32r_expand_block_move): Change movmem to cpymem.
	* config/m32r/m32r.md (movmemsi, movmemsi_internal): Change movmem
	to cpymem.
	* config/mcore/mcore.md (movmemsi): Change name to cpymemsi.
	* config/microblaze/microblaze.c: Change movmem to cpymem in comment.
	* config/microblaze/microblaze.md (movmemsi): Change name to cpymemsi.
	* config/mips/mips.c (mips_use_by_pieces_infrastructure_p):
	Change movmem to cpymem.
	* config/mips/mips.h: Change movmem to cpymem.
	* config/mips/mips.md (movmemsi): Change name to cpymemsi.
	* config/nds32/nds32-memory-manipulation.c
	(nds32_expand_movmemsi_loop_unknown_size,
	nds32_expand_movmemsi_loop_known_size, nds32_expand_movmemsi_loop,
	nds32_expand_movmemsi_unroll,
	nds32_expand_movmemsi): Change movmem to cpymem.
	* config/nds32/nds32-multiple.md (movmemsi): Change name to cpymemsi.
	* config/nds32/nds32-protos.h: Change movmem to cpymem.
	* config/pa/pa.c (compute_movmem_length): Change movmem to cpymem.
	(pa_adjust_insn_length): Change call to compute_movmem_length.
	* config/pa/pa.md (movmemsi, movmemsi_prereload, movmemsi_postreload,
	movmemdi, movmemdi_prereload,
	movmemdi_postreload): Change movmem to cpymem.
	* config/pdp11/pdp11.md (movmemhi, movmemhi1,
	movmemhi_nocc, UNSPEC_MOVMEM): Change movmem to cpymem.
	* config/riscv/riscv.c: Change movmem to cpymem in comment.
	* config/riscv/riscv.h: Change movmem to cpymem.
	* config/riscv/riscv.md: (movmemsi) Change name to cpymemsi.
	* config/rs6000/rs6000.md: (movmemsi) Change name to cpymemsi.
	* config/rx/rx.md: (UNSPEC_MOVMEM, movmemsi, rx_movmem): Change
	movmem to cpymem.
	* config/s390/s390-protos.h: Change movmem to cpymem.
	* config/s390/s390.c (s390_expand_movmem, s390_expand_setmem,
	s390_expand_insv): Change movmem to cpymem.
	* config/s390/s390.md (movmem<mode>, movmem_short, *movmem_short,
	movmem_long, *movmem_long, *movmem_long_31z): Change movmem to cpymem.
	* config/sh/sh.md (movmemsi): Change name to cpymemsi.
	* config/sparc/sparc.h: Change movmem to cpymem in comment.
	* config/vax/vax-protos.h (vax_output_movmemsi): Remove prototype
	for nonexistent function.
	* config/vax/vax.h: Change movmem to cpymem in comment.
	* config/vax/vax.md (movmemhi, movmemhi1): Change movmem to cpymem.
	* config/visium/visium.h: Change movmem to cpymem in comment.
	* config/visium/visium.md (movmemsi): Change name to cpymemsi.
	* config/xtensa/xtensa.md (movmemsi): Change name to cpymemsi.
	* doc/md.texi: Change movmem to cpymem and update description to match.
	* doc/rtl.texi: Change movmem to cpymem.
	* target.def (use_by_pieces_infrastructure_p): Change movmem to cpymem.
	* doc/tm.texi: Regenerate.

2019-06-27  Bill Schmidt  <wschmidt@linux.ibm.com>

	* config/rs6000/rs6000.c (rs6000_option_override_internal): Enable
	-fvariable-expansion-in-unroller by default.
	* doc/invoke.texi (-fvariable-expansion-in-unroller): Document new
	default for Power.

2019-06-27  David Edelsohn  <dje.gcc@gmail.com>

	Revert
	2019-06-26  David Edelsohn  <dje.gcc@gmail.com>
	* config.gcc (powerpc-ibm-aix*): Define target_gtfiles.

	* config.gcc(rs6000-*-*): Define target_gtfiles.

2019-06-27  Jan Hubicka  <jh@suse.cz>

	* ipa-devirt.c (odr_type_d): Add tbaa_enabled flag.
	(add_type_duplicate): When odr hash is not allocated, to nothing.
	(odr_based_tbaa_p): New function.
	(set_type_canonical_for_odr_type): New function.
	* ipa-utils.h (enable_odr_based_tbaa, odr_based_tbaa_p,
	set_type_canonical_for_odr_type): New.
	* tree.c (gimple_canonical_types_compatible_p): ODR types with
	ODR based TBAA are not equivalent to non-ODR types.

2019-06-27  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/90974
	PR rtl-optimization/90975
	PR rtl-optimization/90976
	PR target/91016
	PR tree-optimization/91017
	* config/i386/i386-expand.c (ix86_expand_rounddf_32): Remove
	unused tmp.
	* lra.c (lra_set_insn_recog_data): Remove a leftover from
	initial commit of IRA.
	* optabs.c (expand_twoval_binop): Use xop0 and xop1 instead
	of op0 and op1.
	* tree-vect-loop.c (vect_create_epilog_for_reduction):
	Remove unused mode1.
	* tree-vect-stmts.c (vectorizable_call): Remove dead assignment
	to new_stmt_info.

2019-06-27  Jakub Jelinek  <jakub@redhat.com>

	PR target/90991
	* config/i386/sse.md (avx_vec_concat<mode>): Use nonimmediate_operand
	instead of register_operand for operands[1], add m to its constraints
	if operands[2] uses "C" constraint.  Ensure in condition that if
	operands[2] is not 0, then operands[1] is not a MEM.  For last two
	alternatives, use unaligned loads instead of aligned if operands[1] is
	misaligned_operand.

2019-06-27  Martin Liska  <mliska@suse.cz>

	* asan.c (asan_emit_allocas_unpoison): Remove obviously
	dead assignments.
	* bt-load.c (move_btr_def): Likewise.
	* builtins.c (expand_builtin_apply_args_1): Likewise.
	(expand_builtin_apply): Likewise.
	* cfgexpand.c (expand_asm_stmt): Likewise.
	(construct_init_block): Likewise.
	* cfghooks.c (verify_flow_info): Likewise.
	* cfgloopmanip.c (remove_path): Likewise.
	* cfgrtl.c (rtl_verify_bb_layout): Likewise.
	* cgraph.c (cgraph_node::set_pure_flag): Likewise.
	* combine.c (simplify_if_then_else): Likewise.
	* config/i386/i386.c (ix86_setup_incoming_vararg_bounds): Likewise.
	(choose_basereg): Likewise.
	(ix86_expand_prologue): Likewise.
	(ix86_preferred_output_reload_class): Likewise.
	* cselib.c (cselib_record_sets): Likewise.
	* df-scan.c (df_scan_alloc): Likewise.
	* dojump.c (do_jump_by_parts_greater_rtx): Likewise.
	* early-remat.c (early_remat::record_equiv_candidates): Likewise.
	* emit-rtl.c (try_split): Likewise.
	* graphite-scop-detection.c (assign_parameter_index_in_region):
	Likewise.
	* ipa-cp.c (cgraph_edge_brings_all_agg_vals_for_node): Likewise.
	* ira-color.c (setup_profitable_hard_regs): Likewise.
	* ira.c (rtx_moveable_p): Likewise.
	* lra-eliminations.c (eliminate_regs_in_insn): Likewise.
	* read-rtl.c (read_subst_mapping): Likewise.
	* regrename.c (scan_rtx): Likewise.
	* reorg.c (fill_slots_from_thread): Likewise.
	* tree-inline.c (tree_function_versioning): Likewise.
	* tree-ssa-reassoc.c (optimize_ops_list): Likewise.
	* tree-ssa-sink.c (statement_sink_location): Likewise.
	* tree-ssa-threadedge.c (thread_across_edge): Likewise.
	* tree-vect-loop.c (vect_get_loop_niters): Likewise.
	(vect_create_epilog_for_reduction): Likewise.
	* tree.c (build_nonstandard_integer_type): Likewise.

2019-06-27  Richard Biener  <rguenther@suse.de>

	* tree-ssa-sccvn.c (vn_reference_lookup_3): Encode valueized RHS.

2019-06-27  Jun Ma  <JunMa@linux.alibaba.com>

	PR tree-optimization/89772
	* gimple-fold.c (gimple_fold_builtin_memchr): consider trailing nuls in
	out-of-bound accesses checking.

2019-06-27  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/91014
	* tree-ssa-dse.c (initialize_ao_ref_for_dse): Bail out
	when LHS is NULL_TREE.

2019-06-27  Martin Liska  <mliska@suse.cz>

	* symbol-summary.h (traverse): Pass
	argument a to the call of callback.
	(gt_ggc_mx): Mark arguments as unused.
	(gt_pch_nx): Likewise.

2019-06-27  Kewen Lin  <linkw@gcc.gnu.org>

	PR target/62147
	* loop-iv.c (find_simple_exit): Call finite_loop_p to update
	finiteness.

2019-06-26  Jeff Law  <law@redhat.com>

	PR tree-optimization/90883
	* tree-ssa-dse.c (delete_dead_or_redundant_call): Fix signature.
	(delete_dead_or_redundant_assignment): Likewise.

	PR tree-optimization/90883
	* tree-ssa-alias.c (stmt_kills_ref_p): Handle BUILT_IN_CALLOC.
	* tree-ssa-dse.c: Update various comments to distinguish between
	dead and redundant stores.
	(initialize_ao_ref_for_dse): Handle BUILT_IN_CALLOC.
	(dse_optimize_redundant_stores): New function.
	(delete_dead_or_redundant_call): Renamed from delete_dead_call.
	Distinguish between dead and redundant calls in dump output.  All
	callers updated.
	(delete_dead_or_redundant_assignment): Similarly for assignments.
	(dse_optimize_stmt): Handle _CHK variants.  For statements which
	store 0 into multiple memory locations, try to prove a subsequent
	store is redundant.

2019-06-26  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/89021
	* config/i386/i386.c (ix86_autovectorize_vector_sizes):
	Autovectorize 8-byte vectors for TARGET_MMX_WITH_SSE.

2019-06-26  Iain Sandoe  <iain@sandoe.co.uk>

	* config/rs6000/rs6000-internal.h (branch_island): New typedef.
	(branch_islands): New extern.
	* config/rs6000/rs6000-logue.c (macho_branch_islands): Moved from
	* config/rs6000/rs6000.c: .. here.

2019-06-26  Iain Sandoe  <iain@sandoe.co.uk>

	* config.gcc (powerpc*-*-linux*): Move target_gtfiles from here..
	(powerpc*-*-*) ... to here.

2019-06-26  Jeff Law  <law@redhat.com>

	* tree-ssa-dse.c (initialize_ao_ref_for_dse): Handle _chk variants of
	memcpy, memmove and memset builtins.
	(maybe_trim_memstar_call): Likewise.

2019-06-26  David Edelsohn  <dje.gcc@gmail.com>

	* config/rs6000/rs6000-logue.c: Add #ifndef TARGET_PROFILE_KERNEL.

2019-06-26  David Edelsohn  <dje.gcc@gmail.com>

	* config.gcc (powerpc-ibm-aix*): Define target_gtfiles.

2019-06-26  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000-internal.h (rs6000_keep_leaf_when_profiled): New
	declaration.
	* config/rs6000/rs6000-logue.c (rs6000_keep_leaf_when_profiled): Remove
	"static".
	* config/rs6000/rs6000-logue.c (rs6000_keep_leaf_when_profiled): Delete
	declaration.

2019-06-26  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.c: Fix previous commit, it missed some changes.

2019-06-26  Richard Biener  <rguenther@suse.de>

	PR ipa/90982
	* tree-inline.c (remap_ssa_name): Copy SSA range info.

2019-06-26  Richard Biener  <rguenther@suse.de>

	* lto-streamer.h (lto_bitmap_alloc): Remove.
	(lto_bitmap_free): Likewise.
	* lto-streamer.c (lto_bitmap_alloc): Remove.
	(lto_bitmap_free): Likewise.
	(lto_obstack): Likewise.
	(lto_obstack_initialized): Likewise.
	* lto-streamer-out.c (lto_output): Use own obstack for local
	bitmap, free it consistently.

2019-06-26  Jakub Jelinek  <jakub@redhat.com>

	PR target/90991
	* config/i386/sse.md
	(*<extract_type>_vinsert<shuffletype><extract_suf>_0): Use vmovupd,
	vmovups, vmovdqu, vmovdqu32 or vmovdqu64 instead of the aligned
	insns if operands[2] is misaligned_operand.

2019-06-26  Li Jia He  <helijia@linux.ibm.com>

	* config/rs6000/rs6000.h (TARGET_MADDLD): Remove the restriction of
	TARGET_POWERPC64.
	* config/rs6000/rs6000.md (maddld): Change maddld match_operand from DI
	to GPR.

2019-06-26  Segher Boessenkool  <segher@kernel.crashing.org>

	* doc/invoke.texi (Warning Options): Fix some @opindex syntax.

2019-06-26  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/90973
	* tree-vect-loop.c (vect_get_known_peeling_cost): Use
	epilogue_cost_vec instead of prologue_cost_vec for
	a epilogue cost.

2019-06-26  Martin Liska  <mliska@suse.cz>

	* bb-reorder.c (connect_better_edge_p): Add missing else
	statement in the middle of if-else statements.

2019-06-25  Hongtao Liu  <hongtao.liu@intel.com>
	    H.J. Lu  <hongjiu.lu@intel.com>
	    Olga Makhotina  <olga.makhotina@intel.com>

	* common/config/i386/i386-common.c
	(OPTION_MASK_ISA_AVX512VP2INTERSECT_SET,
	OPTION_MASK_ISA_AVX512VP2INTERSECT_UNSET): New macros.
	(OPTION_MASK_ISA2_AVX512F_UNSET): Add
	OPTION_MASK_ISA_AVX512VP2INTERSECT_UNSET.
	(ix86_handle_option): Handle -mavx512vp2intersect.
	* config/i386/avx512vp2intersectintrin.h: New.
	* config/i386/avx512vp2intersectvlintrin.h: New.
	* config/i386/cpuid.h (bit_AVX512VP2INTERSECT): New.
	* config/i386/driver-i386.c (host_detect_local_cpu): Detect
	AVX512VP2INTERSECT.
	* config/i386/i386-builtin-types.def: Add new types.
	* config/i386/i386-builtin.def: Add new builtins.
	* config/i386/i386-builtins.c: (enum processor_features): Add
	F_AVX512VP2INTERSECT.
	(static const _isa_names_table isa_names_table): Ditto.
	* config/i386/i386-c.c (ix86_target_macros_internal): Define
	__AVX512VP2INTERSECT__.
	* config/i386/i386-expand.c (ix86_expand_builtin): Expand
	IX86_BUILTIN_2INTERSECTD512, IX86_BUILTIN_2INTERSECTQ512,
	IX86_BUILTIN_2INTERSECTD256, IX86_BUILTIN_2INTERSECTQ256,
	IX86_BUILTIN_2INTERSECTD128, IX86_BUILTIN_2INTERSECTQ128.
	* config/i386/i386-modes.def (P2QI, P2HI): New modes.
	* config/i386/i386-options.c (ix86_target_string): Add
	-mavx512vp2intersect.
	(ix86_option_override_internal): Handle AVX512VP2INTERSECT.
	* config/i386/i386.c (ix86_hard_regno_nregs): Allocate two regs for
	P2HImode and P2QImode.
	(ix86_hard_regno_mode_ok): Register pair only starts at even hardreg
	number for P2QImode and P2HImode.
	(ix86_regmode_natural_size): New function.
	* config/i386/i386.h (TARGET_AVX512VP2INTERSECT,
	TARGET_AVX512VP2INTERSECT_P, PTA_AVX512VP2INTERSECT
	REGMODE_NATURAL_SIZE, MASK_PAIR_REGNO_P): New.
	* config/i386/i386-protos.h (ix86_regmode_natural_size): Declare
	* config/i386/i386.opt: Add -mavx512vp2intersect.
	* config/i386/immintrin.h: Include avx512vp2intersectintrin.h and
	avx512vp2intersectvlintrin.h.
	* config/i386/sse.md (define_c_enum "unspec"): Add UNSPEC_VP2INTERSECT.
	(define_mode_iterator VI48_AVX512VP2VL): New.
	(avx512vp2intersect_2intersect<mode>,
	avx512vp2intersect_2intersectv16si): New define_insn patterns.
	* config.gcc: Add avx512vp2intersectvlintrin.h and
	avx512vp2intersectintrin.h to extra_headers.
	* doc/invoke.texi: Document -mavx512vp2intersect.

2019-06-25  Iain Sandoe  <iain@sandoe.co.uk>

	* config/rs6000/darwin.h (ENDFILE_SPEC): New.

2019-06-25  Bill Seurer  <seurer@linux.vnet.ibm.com>

	* config/rs6000/rs6000.c (stack_info, rs6000_pic_labelno,
	savres_routine_syms, savres_routine_name, morestack_ref,
	rs6000_init_machine_status, save_reg_p, first_reg_to_save,
	first_fp_reg_to_save, first_altivec_reg_to_save, compute_vrsave_mask,
	compute_save_world_info, is_altivec_return_reg, fixed_reg_p,
	rs6000_savres_strategy, rs6000_stack_info, debug_stack_info,
	rs6000_return_addr, rs6000_decl_ok_for_sibcall,
	rs6000_function_ok_for_sibcall, rs6000_ra_ever_killed,
	rs6000_emit_load_toc_table, rs6000_emit_eh_reg_restore, uses_TOC,
	create_TOC_reference, rs6000_aix_asm_output_dwarf_table_ref,
	rs6000_emit_stack_tie, rs6000_emit_allocate_stack_1,
	get_stack_clash_protection_probe_interval,
	get_stack_clash_protection_guard_size,
	rs6000_emit_probe_stack_range_stack_clash, rs6000_emit_allocate_stack,
	rs6000_emit_probe_stack_range, output_probe_stack_range_1,
	interesting_frame_related_regno, output_probe_stack_range_stack_clash,
	output_probe_stack_range, rs6000_frame_related, generate_set_vrsave,
	gen_frame_set, gen_frame_load, gen_frame_store, emit_frame_save,
	gen_frame_mem_offset, rs6000_savres_routine_name,
	rs6000_savres_routine_sym, rs6000_emit_stack_reset,
	ptr_regno_for_savres, rs6000_emit_savres_rtx,
	rs6000_emit_prologue_move_from_cr, split_stack_arg_pointer_used_p,
	rs6000_global_entry_point_prologue_needed_p,
	rs6000_get_separate_components, rs6000_components_for_bb,
	rs6000_disqualify_components, rs6000_emit_prologue_components,
	rs6000_emit_epilogue_components, rs6000_set_handled_components,
	emit_vrsave_prologue, emit_split_stack_prologue, rs6000_emit_prologue,
	rs6000_output_savres_externs, rs6000_output_function_prologue,
	rs6000_keep_leaf_when_profiled, load_cr_save, restore_saved_cr,
	load_lr_save, restore_saved_lr, add_crlr_cfa_restore,
	offset_below_red_zone_p, emit_cfa_restores, rs6000_emit_epilogue,
	rs6000_output_function_epilogue, gen_add3_const,
	rs6000_expand_split_stack_prologue, rs6000_live_on_entry,
	rs6000_split_stack_space_check, rs6000_save_toc_in_prologue_p): Moved
	to rs6000-logue.c.
	(machine_function): Moved to rs6000.h.
	(rs6000_stack_t, ALTIVEC_REG_BIT, quad_address_offset_p) Moved to
	rs6000-internal.h.
	* config/rs6000/rs6000-logue.c(stack_info, rs6000_pic_labelno,
	savres_routine_syms, savres_routine_name, morestack_ref,
	rs6000_init_machine_status, save_reg_p, first_reg_to_save,
	first_fp_reg_to_save, first_altivec_reg_to_save, compute_vrsave_mask,
	compute_save_world_info, is_altivec_return_reg, fixed_reg_p,
	rs6000_savres_strategy, rs6000_stack_info, debug_stack_info,
	rs6000_return_addr, rs6000_decl_ok_for_sibcall,
	rs6000_function_ok_for_sibcall, rs6000_ra_ever_killed,
	rs6000_emit_load_toc_table, rs6000_emit_eh_reg_restore, uses_TOC,
	create_TOC_reference, rs6000_aix_asm_output_dwarf_table_ref,
	rs6000_emit_stack_tie, rs6000_emit_allocate_stack_1,
	get_stack_clash_protection_probe_interval,
	get_stack_clash_protection_guard_size,
	rs6000_emit_probe_stack_range_stack_clash, rs6000_emit_allocate_stack,
	rs6000_emit_probe_stack_range, output_probe_stack_range_1,
	interesting_frame_related_regno, output_probe_stack_range_stack_clash,
	output_probe_stack_range, rs6000_frame_related, generate_set_vrsave,
	gen_frame_set, gen_frame_load, gen_frame_store, emit_frame_save,
	gen_frame_mem_offset, rs6000_savres_routine_name,
	rs6000_savres_routine_sym, rs6000_emit_stack_reset,
	ptr_regno_for_savres, rs6000_emit_savres_rtx,
	rs6000_emit_prologue_move_from_cr, split_stack_arg_pointer_used_p,
	rs6000_global_entry_point_prologue_needed_p,
	rs6000_get_separate_components, rs6000_components_for_bb,
	rs6000_disqualify_components, rs6000_emit_prologue_components,
	rs6000_emit_epilogue_components, rs6000_set_handled_components,
	emit_vrsave_prologue, emit_split_stack_prologue, rs6000_emit_prologue,
	rs6000_output_savres_externs, rs6000_output_function_prologue,
	rs6000_keep_leaf_when_profiled, load_cr_save, restore_saved_cr,
	load_lr_save, restore_saved_lr, add_crlr_cfa_restore,
	offset_below_red_zone_p, emit_cfa_restores, rs6000_emit_epilogue,
	rs6000_output_function_epilogue, gen_add3_const,
	rs6000_expand_split_stack_prologue, rs6000_live_on_entry,
	rs6000_split_stack_space_check, rs6000_save_toc_in_prologue_p): Moved
	to here from rs6000.c.
	* config/rs6000/rs6000.h (machine_function): Moved to here from rs6000.c.
	* config/rs6000/rs6000-internal.h: (rs6000_stack_t, ALTIVEC_REG_BIT,
	quad_address_offset_p) Moved to here from rs6000.c.
	* config/rs6000/t-rs6000: Add new source file rs6000-logue.c.
	* config/config.gcc: Add new source file rs6000-logue.c to garbage
	collector.

2019-06-25  Martin Liska  <mliska@suse.cz>

	* hash-table.c (hashtab_chk_error): Move here from ...
	* hash-table.h (hashtab_chk_error): ... here.

2019-06-25  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/90978
	* df-scan.c (df_update_entry_block_defs): Remove dead else
	branch.
	(df_update_exit_block_uses): Likewise.

2019-06-25  Kwok Cheung Yeung  <kcy@codesourcery.com>
	    Andrew Stubbs  <ams@codesourcery.com>

	* config.gcc (thread_file): Set to gcn for AMD GCN.
	* config/gcn/gcn.c (gcn_emutls_var_init): New function.
	(TARGET_EMUTLS_VAR_INIT): New hook.

2019-06-25  Martin Jambor  <mjambor@suse.cz>

	PR ipa/90939
	* ipa-cp.c (ipcp_bits_lattice::meet_with): Remove assert.

2019-06-25  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/90930
	* tree-ssa-reassoc.c (reassociate_bb): Only rewrite expression
	into parallel form in the last pass instance.

2019-06-25  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.c (arc_symbol_binds_local_p): New function.
	(arc_legitimize_pic_address): Simplify and cleanup the function.
	(SYMBOLIC_CONST): Remove.
	(prepare_pic_move): Likewise.
	(prepare_move_operands): Handle complex mov cases here.
	(arc_legitimize_address_0): Remove call to
	arc_legitimize_pic_address.
	(arc_legitimize_address): Remove call to
	arc_legitimize_tls_address.
	* config/arc/arc.md (movqi_insn): Allow Cm3 match.
	(movhi_insn): Likewise.

2019-06-25  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config/msp430/msp430.h: Use __int20__ for SIZE_TYPE and
	PTRDIFF_TYPE.
	* gimple-ssa-sprintf.c (build_intmax_type_nodes): Accept "__intN__"
	format of "__intN" types for UINTMAX_TYPE.
	* stor-layout.c (initialize_sizetypes): Accept "__intN__"
	format of "__intN" types for SIZETYPE.
	* tree.c (build_common_tree_nodes): Accept "__intN__"
	format of "__intN" types for SIZE_TYPE and PTRDIFF_TYPE.
	* doc/invoke.texi: Document that __intN__ disables pedantic
	warnings.

2019-06-25  Jan Hubicka  <jh@suse.cz>

	* tree-ssa-alias.c (indirect_ref_may_alias_decl_p): Check that
	base2_alias_set is non-zero before doing TBAA based disambiguation.

2019-06-25  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/90973
	* tree-vect-loop.c (vect_get_known_peeling_cost): Sum retval
	of prologue and epilogue.

2019-06-24  Jan Hubicka  <jh@suse.cz>

	* ipa-utils.h (type_with_linkage_p): Verify that type is
	CXX_ODR_P.
	(odr_type_p): Remove extra return.
	* lto-streamer-out.c (hash_tree): Hash TYPE_CXX_ODR_P;
	hash STRING_FLAG only for arrays and integers.
	* tree-stremaer-in.c (unpack_ts_type_common_value_fields):
	Update analogously.
	* tree-streamer-out.c (pack_ts_type_common_value_fields):
	Likewise.
	* print-tree.c (print_node): Print cxx-odr-p
	and string-flag.
	* tree.c (need_assembler_name_p): Also check that type
	is CXX_ODR_TYPE_P
	(verify_type_variant): Update verification of SRING_FLAG;
	also check CXX_ODR_P.
	* tree.h (ARRAY_OR_INTEGER_TYPE_CHECK): New macro.
	(TYPE_STRING_FLAG): Use it.
	(TYPE_CXX_ODR_P): New macro.
	* dwarf2out.c (gen_array_type_die): First check that type
	is an array and then test string flag.

2019-06-24  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/90972
	* tree-vect-stmts.c (vect_init_vector): Handle CONSTANT_CLASS_P
	in common code, dealing with STRING_CST properly.

2019-06-24  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/90930
	PR tree-optimization/90316
	* tree-ssa-alias.c (walk_non_aliased_vuses): Add missing
	decrement of limit.

2019-06-24  Martin Sebor  <msebor@redhat.com>

	* tree-pretty-print.h: Remove unnecessary punctuation characters
	from a diagnostic.
	* tree-ssa.c (release_defs_bitset): Correct preprocessor conditional.

2019-06-24  Jonathan Wakely  <jwakely@redhat.com>

	* ginclude/float.h (FLT_DECIMAL_DIG, DBL_DECIMAL_DIG, LDBL_DECIMAL_DIG)
	(FLT_HAS_SUBNORM, DBL_HAS_SUBNORM, LDBL_HAS_SUBNORM, FLT_TRUE_MIN)
	(DBL_TRUE_MIN, LDBL_TRUE_MIN): Also define for C++17.

2019-06-23  Iain Sandoe  <iain@sandoe.co.uk>

	* config/rs6000/darwin.h: Handle GCC target pragma.

2019-06-23  Iain Sandoe  <iain@sandoe.co.uk>

	* config/rs6000/darwin.h: (__PPC__, __PPC64__): New.

2019-06-22  Jeff Law  <law@redhat.com>

	* config/avr/avr.c (TARGET_BUILTIN_SETJMP_FRAME_VALUE): Remove.

2019-06-22  Jan Hubicka  <jh@suse.cz>

	* tree-ssa-alias.c (nonoverlapping_component_refs_p): Do not
	give up on bitfields; continue searching for different refs
	appearing later.

2019-06-21  Jakub Jelinek  <jakub@redhat.com>

	* tree-vect-data-refs.c (vect_find_stmt_data_reference): Handle
	even zero DR_OFFSET, but DR_BASE_ADDRESS of POINTER_PLUS_EXPR
	containing the offset as possible simd lane access.  Look through
	widening conversion.  Move the
	TREE_CODE (DR_INIT (newdr)) == INTEGER_CST test earlier and reindent.

2019-06-21  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/90930
	* tree-ssa-reassoc.c (rewrite_expr_tree_parallel): Set visited
	flag on new stmts to avoid re-processing them.

2019-06-21  Matthew Beliveau  <mbelivea@redhat.com>

	PR c++/90875 - added -Wswitch-outside-range option
	* doc/invoke.texi (Wswitch-outside-range): Document.

2019-06-21  Jeff Law  <law@redhat.com>

	PR tree-optimization/90949
	* tree-ssa-copy.c (fini_copy_prop): Use reset_flow_sensitive_info.
	* tree-ssanames.c (reset_flow_sensitive_info): Reset non-null state.

2019-06-21  Richard Biener  <rguenther@suse.de>

	PR debug/90914
	* dwarf2out.c (prune_unused_types_walk): Always consider
	function-local extern declarations as used.

2019-06-21  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/90913
	* tree-vect-loop-manip.c (vect_loop_versioning): Do not re-use
	the scalar variant of if-conversion versioning.

2019-06-21  Jakub Jelinek  <jakub@redhat.com>

	* omp-low.c (lower_rec_simd_input_clauses): Add rvar2 argument,
	create another "omp scan inscan exclusive" array if
	!ctx->scan_inclusive.
	(lower_rec_input_clauses): Handle exclusive scan inscan reductions.
	(lower_omp_scan): Likewise.
	* tree-vectorizer.h (struct _stmt_vec_info): Use 3-bit instead of
	2-bit bitfield for simd_lane_access_p member.
	* tree-vect-data-refs.c (vect_analyze_data_refs): Also handle
	aux == (void *)-4 as simd lane access.
	* tree-vect-stmts.c (check_scan_store): Handle exclusive scan.  Update
	comment with permutations to show the canonical permutation order.
	(vectorizable_scan_store): Handle exclusive scan.
	(vectorizable_store): Call vectorizable_scan_store even for
	STMT_VINFO_SIMD_LANE_ACCESS_P > 3.

	* tree-vect-data-refs.c (vect_find_stmt_data_reference): Handle
	"omp simd array" arrays with one byte elements.

2019-06-20  Uroš Bizjak  <ubizjak@gmail.com>

	* config/alpha/alpha.md (@unaligned_store<mode>):
	Rename from unaligned_store<mode>.
	(@reload_in<mode>_aligned): Rename from reload_in<mode>_aligned.
	* config/alpha/sync.md (@load_locked_<mode>): Rename
	from load_locked_<mode>.
	(@store_conditional_<mode>): Rename from store_conditional_<mode>.
	(@atomic_compare_and_swap<mode>_1): Rename
	from atomic_compare_and_swap<mode>_1.
	(@atomic_exchange<mode>_1): Rename from atomic_exchange<mode>_1.
	* config/alpha/alpha.c (alpha_expand_mov_nobwx):
	Use gen_reload_in_aligned and gen_unaligned_store.
	(emit_load_locked): Remove.
	(emit_store_conditional): Ditto.
	(alpha_split_atomic_op): Use gen_load_locked and gen_store_conditional.
	(alpha_split_compare_and_swap): Ditto.
	(alpha_expand_compare_and_swap_12): Use gen_atomic_compare_and_swap_1.
	(alpha_split_compare_and_swap_12): Use gen_load_locked
	and gen_store_conditional.
	(alpha_split_atomic_exchange): Ditto.
	(alpha_expand_atomic_exchange_12): Use gen_atomic_exchange_1.
	(alpha_split_atomic_exchange_12): Use gen_load_locked
	and gen_store_conditional.

2019-06-20  Richard Earnshaw  <rearnsha@arm.com>

	* config/aarch64/aarch64-errata.h: New file.
	* config/aarch64/aarch64-elf-raw.h (CA53_ERR_835769_SPEC): Delete.
	(CA53_ERR_843419_SPEC): Delete.
	(LINK_SPEC): Use AARCH64_ERRATA_LINK_SPEC instead of above.
	* config/aarch64/aarch64-linux.h: Likewise.
	* config/aarch64/aarch64-netbsd.h: Likewise.
	* config/aarch64/aarch64-freebsd.h: Likewise.

2019-06-20  Marek Polacek  <polacek@redhat.com>

	* config/sh/sh.c (sh2a_function_vector_p): Use get_attribute_name.

2019-06-20  Michael Meissner  <meissner@linux.ibm.com>

	* config/rs6000/rs6000.md (isa attribute): Add support for
	for a future processor.

2019-06-20  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/54855
	* config/i386/i386-expand.c (ix86_expand_vector_set): Generate
	standard scalar operation pattern for V2DF.
	* config/i386/sse.md (*<sse>_vm<plusminus_insn><mode>3): New.
	(*<sse>_vm<multdiv_mnemonic><mode>3): Likewise.
	(*ieee_<ieee_maxmin><mode>3): Likewise.
	(vec_setv2df_0): Likewise.

2019-06-20  Jan Hubicka  <jh@suse.cz>

	* tree-ssa-alias.c (aliasing_component_refs_p): Remove ref2_is_decl
	parameter; it has no use in gimple memory model.
	(indirect_ref_may_alias_decl_p): Update.

2019-06-20  Martin Liska  <mliska@suse.cz>

	* params.def (PARAM_HASH_TABLE_VERIFICATION_LIMIT): Decrease
	to 10.

2019-06-20  Jakub Jelinek  <jakub@redhat.com>

	* tree-vect-stmts.c (enum scan_store_kind): New type.
	(scan_store_can_perm_p): Change last argument from int * to
	vec<enum scan_store_kind> *, record precisely which permutations
	need whole vector left shift or that plus VEC_COND_EXPR.
	(vectorizable_scan_store): Adjust caller, use whole vector left shift
	and additional VEC_COND_EXPR only for those iterations that need it.

2019-06-20  Alexandre Oliva  <oliva@adacore.com>

	* config.gcc: Fix ARM --with-fpu checking and error message.

2019-06-19  Marek Polacek  <polacek@redhat.com>

	PR c++/60364 - noreturn after first decl not diagnosed.
	* attribs.c (get_attribute_namespace): No longer static.
	(decl_attributes): Avoid shadowing.  Preserve the C++11 form for C++11
	attributes.
	(attr_noreturn_exclusions): Make it extern.
	* attribs.h (get_attribute_namespace): Declare.
	* tree-inline.c (function_attribute_inlinable_p): Use
	get_attribute_name.

2019-06-19  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/90626
	* tree-ssa-strlen.c (strxcmp_unequal): Fix typos.

	PR tree-optimization/90626
	* tree-ssa-strlen.c (strxcmp_unequal): New function.
	(handle_builtin_string_cmp): Call it.

2019-06-19  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin.h (DRIVER_SELF_SPECS): Add RDYNAMIC, DARWIN_PIE_SPEC
	and DARWIN_NOPIE_SPEC.
	(RDYNAMIC): New, modified from DARWIN_EXPORT_DYNAMIC.
	(DARWIN_PIE_SPEC): Collate from darwin.h and darwin9.h.
	(DARWIN_NOPIE_SPEC): Collate from darwin10.h.
	(DARWIN_NOCOMPACT_UNWIND): New from darwin10.h
	(DARWIN_EXPORT_DYNAMIC): Delete.
	* config/darwin10.h (LINK_GCC_C_SEQUENCE_SPEC): Move no_compact_unwind
	and pie options processing to  darwin.h.
	* config/darwin9.h (DARWIN_PIE_SPEC): Move pie processing to darwin.h

2019-06-19  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin-driver.c (darwin_driver_init): Fix off-by-one errors
	in computing the number of options to be moved.

2019-06-19  Maya Rashish  <coypu@sdf.org>

	*  config/arm/netbsd-elf.h (SYSARCH_ARM_SYNC_ICACHE): New definition.
	(CLEAR_INSN_CACHE) Use it.

2019-06-19  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (cmpstrnsi): Remove dead code.

2019-06-19  Wilco Dijkstra  <wdijkstr@arm.com>

	PR middle-end/84521
	* builtins.c (expand_builtin_setjmp_setup): Save
	hard_frame_pointer_rtx.
	(expand_builtin_setjmp_receiver): Do not emit sfp = fp move since we
	restore fp.
	* function.c (expand_function_start): Save hard_frame_pointer_rtx for
	non-local goto.
	* lra-eliminations.c (eliminate_regs_in_insn): Remove sfp = fp
	elimination code.
	(remove_reg_equal_offset_note): Remove unused function.
	* reload1.c (eliminate_regs_in_insn): Remove sfp = hfp elimination
	code.
	* config/arc/arc.c (TARGET_BUILTIN_SETJMP_FRAME_VALUE): Remove.
	(arc_builtin_setjmp_frame_value): Remove function.
	* config/avr/avr.c  (TARGET_BUILTIN_SETJMP_FRAME_VALUE): Remove.
	(avr_builtin_setjmp_frame_value): Remove function.
	* config/i386/i386.c (TARGET_BUILTIN_SETJMP_FRAME_VALUE): Remove.
	(ix86_builtin_setjmp_frame_value): Remove function.
	* config/pa/pa.md (nonlocal_goto): Remove FP adjustment.
	* config/sparc/sparc.c (TARGET_BUILTIN_SETJMP_FRAME_VALUE): Remove.
	(sparc_builtin_setjmp_frame_value): Remove function.
	* config/vax/vax.c (TARGET_BUILTIN_SETJMP_FRAME_VALUE): Remove.
	(vax_builtin_setjmp_frame_value): Remove function.
	* config/xtensa/xtensa.c (xtensa_frame_pointer_required): Force frame
	pointer	if has_nonlocal_label.

2019-06-19  Jakub Jelinek  <jakub@redhat.com>

	* doc/md.texi: Document vec_shl_<mode> pattern.
	* optabs.def (vec_shl_optab): New optab.
	* optabs.c (shift_amt_for_vec_perm_mask): Add shift_optab
	argument, if == vec_shl_optab, check for left whole vector shift
	pattern rather than right shift.
	(expand_vec_perm_const): Add vec_shl_optab support.
	* optabs-query.c (can_vec_perm_var_p): Mention also vec_shl optab
	in the comment.
	* tree-vect-generic.c (lower_vec_perm): Support permutations which
	can be handled by vec_shl_optab.
	* tree-vect-stmts.c (scan_store_can_perm_p): New function.
	(check_scan_store): Use it.
	(vectorizable_scan_store): If target can't do normal permutations,
	try to use whole vector left shifts and if needed a VEC_COND_EXPR
	after it.
	* config/i386/sse.md (vec_shl_<mode>): New expander.

	* omp-low.c (lower_rec_input_clauses): Handle references properly
	in inscan clauses.
	(lower_omp_scan): Likewise.

2019-06-19  Kugan Vivekanandarajah  <kugan.vivekanandarajah@linaro.org>

	* tree-ssa-address.c (preferred_mem_scale_factor): Handle when
	mem_mode is BLKmode.

2019-06-18  Max Filippov  <jcmvbkbc@gmail.com>

	PR target/90922
	* config/xtensa/xtensa.c (xtensa_expand_prologue): Add stack
	pointer adjustment for the case of no callee-saved registers and
	stack frame bigger than 128 bytes.

2019-06-18  Thomas Schwinge  <thomas@codesourcery.com>

	PR middle-end/90862
	* omp-low.c (check_omp_nesting_restrictions): Handle
	GF_OMP_TARGET_KIND_OACC_DECLARE.

2019-06-18  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (@cmp<mode>_1): Rename from cmp<mode>_1.
	(@add<mode>3_carry): Rename from add<mode>3_carry.
	(@sub<mode>3_carry_ccc): Rename from sub<mode>3_carry_ccc.
	(@sub<mode>3_carry_ccgz): Rename form sub<mode>3_carry_ccgz.
	(@copysign<mode>3_const): Rename from copysign<mode>3_const.
	(@copysign<mode>3_var): Rename from copysign<mode>3_var.
	(@xorsign<mode>3_1): Rename from xorsign<mode>3_1.
	(@x86_shift<mode>_adj_1): Rename from x86_shift<mode>_adj_1.
	(@x86_shift<mode>_adj_2): Rename from x86_shift<mode>_adj_2.
	(@x86_shift<mode>_adj_3): Rename from x86_shift<mode>_adj_3.
	(cmpstrnsi): Use gen_cmp_1.
	(lwp_slwpcb): Use gen_lwp_slwpcb_1.
	(@lwp_slwpcb<mode>_1): Rename from lwp_slwpcb<mode>_1.
	(@umonitor_<mode>): Rename from umonitor_<mode>.
	* config/i386/i386-expand.c (ix86_expand_copysign):
	Use gen_copysign3_const and gen_copysign3_var.
	(ix86_expand_xorsign): Use gen_xorsign3_1.
	(ix86_expand_branch): Use gen_sub3_carry_ccc,
	gen_sub3_carry_ccgz and gen_cmp1.
	(ix86_expand_int_addcc): Use gen_sub3_carry and gen_add3_carry.
	(ix86_split_ashl): Use gen_x86_shift_adj_1 and gen_x86_shift_adj_2.
	(ix86_split_ashr): Use gen_x86_shift_adj_1 and gen_x86_shift_adj_3.
	(ix86_split_lshr): Ditto.
	(ix86_expand_builtin) <case IX86_BUILTIN_UMONITOR>: Use gen_umonitor.

2019-06-18  Jason Merrill  <jason@redhat.com>

	* tree.c (build_constructor): Add MEM_STAT_DECL.

2019-06-18  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-modes.def (CC_NZC): New CC_MODE.
	* config/aarch64/aarch64-sve.md (*<optab><mode>3_cc)
	(ptest_ptrue<mode>, while_ult<GPI:mode><PRED_ALL:mode>)
	(*while_ult<GPI:mode><PRED_ALL:mode>_cc, *cmp<cmp_op><mode>)
	(*cmp<cmp_op><mode>_ptest, *cmp<cmp_op><mode>_cc)
	(*pred_cmp<cmp_op><mode>_combine, *pred_cmp<cmp_op><mode>)
	(vec_cmp<mode><vpred>, vec_cmpu<mode><vpred>, cbranch<mode>4):
	Use CC_NZC instead of CC.
	* config/aarch64/aarch64.md (condjump): Print a '.' in SVE conditions.
	* config/aarch64/aarch64.c (aarch64_sve_condition_codes): New variable.
	(aarch64_print_operand): Handle E_CC_NZCmode.
	(aarch64_emit_sve_ptrue_op_cc): Use gen_set_clobber_cc_nzc instead
	of gen_set_clobber_cc.

2019-06-18  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-sve.md: Tabify file.

2019-06-18  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-protos.h (aarch64_pfalse_reg): Declare.
	* config/aarch64/aarch64.c (aarch64_pfalse_reg): New function.
	* config/aarch64/aarch64-sve.md: Use it.

2019-06-18  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-protos.h (aarch64_ptrue_reg): Declare.
	* config/aarch64/aarch64.c (aarch64_ptrue_reg): New functions.
	(aarch64_expand_sve_widened_duplicate, aarch64_expand_sve_mem_move)
	(aarch64_maybe_expand_sve_subreg_move, aarch64_evpc_rev_local)
	(aarch64_expand_sve_vec_cmp_int): Use it.
	(aarch64_expand_sve_vec_cmp_float): Likewise.
	* config/aarch64/aarch64-sve.md: Likewise throughout.

2019-06-18  Richard Sandiford  <richard.sandiford@arm.com>
	    Kugan Vivekanandarajah  <kuganv@linaro.org>

	* config/aarch64/aarch64-sve.md (*cond_<optab><mode>_0): Delete.
	(*cond_<optab><mode>_z): Fold into...
	(*cond_<optab><mode>_any): ...here.  Also handle cases in which
	operand 4 can be tied to operand 0 (either inherently or via RA).

2019-06-18  Richard Biener  <rguenther@suse.de>

	PR debug/90900
	* cfgexpand.c (expand_debug_expr): Treat NOTE_P DECL_RTL
	as if optimized away.

2019-06-18  Tom de Vries  <tdevries@suse.de>

	* config/nvptx/nvptx-protos.h (gen_set_softstack_insn): Remove.
	* config/nvptx/nvptx.c (gen_set_softstack_insn): Remove.
	* config/nvptx/nvptx.md (define_insn "set_softstack_<mode>"):
	Rename to ...
	(define_insn "@set_softstack_<mode>"): ... this.
	(define_insn "omp_simt_enter_<mode>"): Rename to ...
	(define_insn "@omp_simt_enter_<mode>"): ... this.
	(define_insn "omp_simt_exit_<mode>"): Rename to ...
	(define_insn "@omp_simt_exit_<mode>"): ... this.

2019-06-18  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-loop-manip.c (vect_set_loop_masks_directly): Remove
	vf parameter.  Restore the previous iv step of nscalars_step,
	but give it iv_type rather than compare_type.  Tweak code order
	to match the comments.
	(vect_set_loop_condition_masked): Update accordingly.
	* tree-vect-loop.c (vect_verify_full_masking): Use "unsigned int"
	for iv_precision.  Tweak comment formatting.

2019-06-18  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin.c: Strip trailing whitespace.

2019-06-18  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin.c (darwin_emit_unwind_label): New default to false.
	(darwin_override_options): Set darwin_emit_unwind_label as needed.

2019-06-18  Martin Jambor  <mjambor@suse.cz>

	PR ipa/90889
	* ipa-cp.c (ignore_edge_p): Do not ignore edges when only the
	caller does not have flag_ipa_cp set.

2019-06-18  Alejandro Martinez  <alejandro.martinezvicente@arm.com>

	* config/aarch64/aarch64-sve.md (mask_fold_left_plus_<mode>): Renamed
	from "*fold_left_plus_<mode>", updated operands order.
	* doc/md.texi (mask_fold_left_plus_@var{m}): Documented new optab.
	* internal-fn.c (mask_fold_left_direct): New define.
	(expand_mask_fold_left_optab_fn): Likewise.
	(direct_mask_fold_left_optab_supported_p): Likewise.
	* internal-fn.def (MASK_FOLD_LEFT_PLUS): New internal function.
	* optabs.def (mask_fold_left_plus_optab): New optab.
	* tree-vect-loop.c (mask_fold_left_plus_optab): New function to get a
	masked internal_fn for a reduction ifn.
	(vectorize_fold_left_reduction): Add support for masking reductions.

2019-06-18  Kewen Lin  <linkw@gcc.gnu.org>

	PR middle-end/80791
	* target.def (predict_doloop_p): New hook.
	* targhooks.h (default_predict_doloop_p): New declaration.
	* targhooks.c (default_predict_doloop_p): New function.
	* doc/tm.texi.in (TARGET_PREDICT_DOLOOP_P): New hook.
	* doc/tm.texi: Regenerate.
	* config/rs6000/rs6000.c (rs6000_predict_doloop_p): New function.
	(TARGET_PREDICT_DOLOOP_P): New macro.
	* tree-ssa-loop-ivopts.c (generic_predict_doloop_p): New function.

2019-06-17  Jakub Jelinek  <jakub@redhat.com>

	* omp-low.c (struct omp_context): Add scan_inclusive field.
	(scan_omp_1_stmt) <case GIMPLE_OMP_SCAN>: Set ctx->scan_inclusive
	if inclusive scan.
	(struct omplow_simd_context): Add lastlane member.
	(lower_rec_simd_input_clauses): Add rvar argument, handle inscan
	reductions.  Build 2 or 3 argument .GOMP_SIMD_LANE calls rather than
	1 or 2 argument.
	(lower_rec_input_clauses): Handle inscan reductions in simd contexts.
	(lower_lastprivate_clauses): Set TREE_THIS_NOTRAP on the ARRAY_REF.
	(lower_omp_scan): New function.
	(lower_omp_1) <case GIMPLE_OMP_SCAN>: Use lower_omp_scan.
	* tree-ssa-dce.c (eliminate_unnecessary_stmts): For IFN_GOMP_SIMD_LANE
	check 3rd argument if present rather than 2nd.
	* tree-vectorizer.h (struct _loop_vec_info): Add scan_map member.
	(struct _stmt_vec_info): Change simd_lane_access_p from bool into
	2-bit bitfield.
	* tree-vect-loop.c (_loop_vec_info::_loop_vec_info): Initialize
	scan_map.  For IFN_GOMP_SIMD_LANE check 3rd argument if present rather
	than 2nd.
	(_loop_vec_info::~_loop_vec_info): Delete scan_map.
	* tree-vect-data-refs.c (vect_analyze_data_ref_accesses): Allow two
	different STMT_VINFO_SIMD_LANE_ACCESS_P refs if they have the same
	init.
	(vect_find_stmt_data_reference): Encode in ->aux the 2nd
	IFN_GOMP_SIMD_LANE argument.
	(vect_analyze_data_refs): Set STMT_VINFO_SIMD_LANE_ACCESS_P from the
	encoded ->aux value.
	* tree-vect-stmts.c: Include attribs.h.
	(vectorizable_call): Adjust comment about IFN_GOMP_SIMD_LANE.
	(scan_operand_equal_p, check_scan_store, vectorizable_scan_store): New
	functions.
	(vectorizable_load): For STMT_VINFO_SIMD_LANE_ACCESS_P tests use != 0.
	(vectorizable_store): Handle STMT_VINFO_SIMD_LANE_ACCESS_P > 1.

2019-06-17  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/62055
	* config/i386/i386.md (*nabstf2_1): New insn pattern.
	(*nabs<mode>2_1): Ditto.
	(nabs sse-reg splitter): New splitter.
	* config/i386/sse.md (*nabs<mode>2): New insn_and_split pattern.

2019-06-17  Jan Hubicka  <hubicka@ucw.cz>

	PR bootstrap/90873.
	* tree-ssa-alias.c (indirect_ref_may_alias_decl_p): Fix
	TMR index check.

2019-06-17  Tom de Vries  <tdevries@suse.de>

	* config/nvptx/nvptx-protos.h (gen_set_softstack_insn): Declare.
	* config/nvptx/nvptx.c (gen_set_softstack_insn): New function.
	* config/nvptx/nvptx.md (define_insn "set_softstack_insn"): Rename to
	...
	(define_insn "set_softstack_<mode>"): ... this.  Use P iterator on
	match_operand 0.
	(define_insn "omp_simt_enter_insn"): Rename to ...
	(define_insn "omp_simt_enter_<mode>"): ... this.  Use P iterator on
	match_operand 0, 1 and 2, as well as the unspec_volatile result.
	(define_expand "omp_simt_enter): Use gen_omp_simt_enter_di and
	gen_omp_simt_enter_si.
	(define_expand "omp_simt_exit"): New.
	(define_insn "omp_simt_exit"): Rename to ...
	(define_insn "omp_simt_exit_<mode>"): ... this.  Use P iterator on
	match_operand 0.

2019-06-17  Matthew Green  <mrg@eterna.com.au>
	    Maya Rashish  <coypu@sdf.org>

	* config.gcc (aarch64*-*-netbsd*): New target.
	* config/aarch64/aarch64-netbsd.h: New file.
	* config/aarch64/t-aarch64-netbsd: Likewise.

2019-06-17  Jan Hubicka  <hubicka@ucw.cz>

	* tree-ssa-alias.c (aliasing_component_refs_p): Consider only
	the access path from base to first VIEW_CONVERT_EXPR or
	BIT_FIELD_REF.

2019-06-17  Jan Hubicka  <hubicka@ucw.cz>

	* tree-ssa-alias.c (nonoverlapping_component_refs_p): Also truncate
	access path on BIT_FIELD_REFs.

2019-06-17  Martin Liska  <mliska@suse.cz>

	PR ipa/90874
	* ipa-utils.h (odr_type_p): Remove dead code.

2019-06-17  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

	* configure.ac (ld_vers) <*-*-solaris2*>: Remove support for
	alternative Solaris 11.4 format.
	* configure: Regenerate.

2019-06-17  Tom de Vries  <tdevries@suse.de>

	* config/nvptx/nvptx.md (define_insn "call_insn"): Rename to ...
	(define_insn "call_insn_<mode>"): ... this.  Use P iterator on
	match_operand 0.
	(define_insn "call_value_insn"): Rename to ...
	(define_insn "call_value_insn_<mode>"): this.  Use P iterator on
	match_operand 0.
	(define_insn "nvptx_red_partition"): Set unspec_volatile result mode to
	DI.

2019-06-16  John David Anglin  <danglin@gcc.gnu.org>

	PR middle-end/64242
	* config/pa/pa.md (nonlocal_goto): Restore frame pointer last.  Add
	frame clobbers and schedule block.
	(builtin_longjmp): Likewise.

2019-06-16  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config/msp430/msp430.c (msp430_expand_helper): Setup arguments which
	describe how to perform MSPABI compliant 64-bit shift.
	* config/msp430/msp430.md (ashldi3): New define_expand.
	(ashrdi3): New define_expand.
	(lshrdi3): New define_expand.

2019-06-16  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* doc/sourcebuild.texi: Document new effective target keyword
	longlong64.

2019-06-16  Jan Hubicka  <hubicka@ucw.cz>

	* tree-ssa-alias.c (indirect_ref_may_alias_decl_p,
	indirect_refs_may_alias_p): Revert accidental commits.

	* tree-ssa-alias.c (aliasing_component_refs_p): Watch for arrays
	at the end of structures.

2019-06-16  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin.c (machopic_indirect_call_target): Use renamed
	darwin_picsymbol_stubs to decide on output.
	(darwin_override_options): Handle darwin_picsymbol_stubs.
	* config/darwin.h (MIN_LD64_OMIT_STUBS): New.
	(LD64_VERSION): Revise default.
	* config/darwin.opt: (mpic-symbol-stubs): New option.
	(darwin_picsymbol_stubs): New variable.
	* config/i386/darwin.h (TARGET_MACHO_BRANCH_ISLANDS):
	rename to TARGET_MACHO_PICSYM_STUBS.
	* config/i386/i386.c (output_pic_addr_const): Likewise.
	* config/i386/i386.h Likewise.
	* config/rs6000/darwin.h: Likewise.
	* config/rs6000/rs6000.c (rs6000_call_darwin_1): Use renamed
	darwin_picsymbol_stubs.

2019-06-16  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin.opt (prebind, noprebind, seglinkedit,
	noseglinkedit): Add RejectNegative.

2019-06-16  Jan Hubicka  <hubicka@ucw.cz>

	* tree-ssa-alias.c (nonoverlapping_component_refs_p): Fix pasto
	in my previous patch.

2019-06-16  Tom de Vries  <tdevries@suse.de>

	PR tree-optimization/89376
	* tree-parloops.c (oacc_entry_exit_ok_1): Handle red == NULL.

2019-06-15  Maya Rashish  <coypu@sdf.org>

	* doc/invoke.texi (Spec Files): Update location of the
	Fortran spec file.

2019-06-15  Gerald Pfeifer  <gerald@pfeifer.com>

	* doc/extend.texi (Common Function Attributes): Clarify
	no_sanitize.  Fix grammar.

2019-06-15  Jan Hubicka  <hubicka@ucw.cz>

	* tree-ssa-alias.c (alias_stats): Add
	nonoverlapping_component_refs_p_may_alias,
	nonoverlapping_component_refs_p_no_alias,
	nonoverlapping_component_refs_of_decl_p_may_alias,
	nonoverlapping_component_refs_of_decl_p_no_alias.
	(dump_alias_stats): Dump them.
	(nonoverlapping_component_refs_of_decl_p): Add stats.
	(nonoverlapping_component_refs_p): Add stats; do not stop on first
	ARRAY_REF.

2019-06-15  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (and<mode>3): Generate zero-extends for
	TARGET_ZERO_EXTEND_WITH_AND && optimize_function_for_speed_p (cfun))
	only.
	(*anddi3_doubleword): Split before reload. Merge with
	anddi->zext pre-reload splitter.
	(*andndi3_doubleword): Split before reload.
	(*<code>di3_doubleword): Ditto.
	(*one_cmpldi2_doubleword): Ditto.

2019-06-15  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/90779
	* gimplify.c: Include omp-offload.h and context.h.
	(gimplify_bind_expr): Add "omp declare target" attributes
	to static block scope variables inside of target region or target
	functions.

2019-06-15  Tom de Vries  <tdevries@suse.de>

	PR tree-optimization/90009
	* tree-ssa-threadbackward.c (thread_jumps::profitable_jump_thread_path):
	Return NULL if bb contains IFN_UNIQUE.

2019-06-14  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (CCEITHER): New define_mode_iterator.
	(un): New define_mode_attr.
	(isel_signed_<mode>, isel_unsigned_<mode>): Delete, merge into ...
	(isel_<un>signed_<GPR:mode>): ... this.  New define_insn.
	(isel_reversed_signed_<mode>, isel_reversed_unsigned_<mode>): Delete,
	merge into ...
	(isel_reversed_<un>signed_<GPR:mode>): ... this.  New define_insn.

2019-06-14  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin.opt: Add RejectNegative where needed, reorder
	and add minimal functional descriptions.

2019-06-14  H.J. Lu  <hongjiu.lu@intel.com>

	PR rtl-optimization/90765
	* calls.c (update_stack_alignment_for_call): New function.
	(expand_call): Call update_stack_alignment_for_call when
	outgoing parameter is passed in the stack.
	(emit_library_call_value_1): Likewise.
	* function.c (locate_and_pad_parm): Don't update
	stack_alignment_needed and preferred_stack_boundary.

2019-06-14  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/90877
	* config/i386/i386-features.c
	(dimode_scalar_chain::compute_convert_gain): Replace
	mmxsse_to_integer with sse_to_integer.
	* config/i386/i386.c (ix86_register_move_cost): Verify that
	moves between MMX and non-MMX units require secondary memory.
	Correct costs of moves between SSE and integer units.
	* config/i386/i386.h (processor_costs): Rename cost of moving
	SSE register to integer to sse_to_integer.  Rename cost of

2019-06-14  Matt Thomas  <matt@3am-software.com>
	    Matthew Green  <mrg@eterna.com.au>
	    Nick Hudson  <skrll@netbsd.org>
	    Maya Rashish  <coypu@sdf.org>
	    Richard Earnshaw  <rearnsha@arm.com>

	* config.gcc (arm*-*-netbsdelf*) Add support for EABI configuration.
	* config.host (arm*-*-netbsd*): Use driver-arm.o on native NetBSD.
	* config/arm/netbsd-eabi.h: New file.
	* config/arm/netbsd-elf.h (TARGET_OS_CPP_BUILTINS): Undefine before
	redefining.
	(SUBTARGET_EXTRA_ASM_SPEC): Don't pass -matpcs to the assembler.
	* config/netbsd-elf.h (NETBSD_LINK_LD_ELF_SO_SPEC): New define.
	(NETBSD_SUBTARGET_EXTRA_SPECS): New define.
	(SUBTARGET_EXTRA_SPECS): Define to NETBSD_SUBTARGET_EXTRA_SPECS.

2019-06-14  Richard Biener  <rguenther@suse.de>

	* tree-loop-distribution.c (classify_partition): Return
	whether a reduction appeared in all partitions and do not
	stop builtin detection because of this.
	(distribute_loop): Sort a non-builtin partition last if
	there's a reduction in all partitions and make sure the
	partition prevailing as last is not a builtin.

2019-06-14  Feng Xue  <fxue@os.amperecomputing.com>

	PR ipa/90401
	* ipa-prop.c (add_to_agg_contents_list): New function.
	(clobber_by_agg_contents_list_p): Likewise.
	(extract_mem_content): Likewise.
	(get_place_in_agg_contents_list): Delete.
	(determine_known_aggregate_parts): Renamed from
	determine_locally_known_aggregate_parts.  New parameter
	aa_walk_budget_p.

2019-06-13  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/90662
	* tree-ssa-strlen.c (get_stridx): Convert fold_build2 operands
	to the same type.

2019-06-13  Jan Hubicka  <hubicka@ucw.cz>

	PR bootstrap/90873
	* tree-ssa-alias.c (indirect_ref_may_alias_decl_p): Also check that
	dbase is not TARGET_MEM_REF.

2019-06-13  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (SWIM1248s): Rename from SWIM1248x.
	Update all uses.
	(and<mode>3): Use gen_extend_insn instead of indirect functions.
	Do not generate DImode extends for 32bit targets.
	(and->zext post-reload splitter): Use gen_extend_insn
	instead of indirect functions.
	(anddi->zext pre-reload splitter): New.
	(*zext<mode>_doubleword_and): Remove.
	(*zext<mode>_doubleword): Ditto.
	(*zextsi_doubleword): Dittto.

2019-06-13  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386-expand.c (ix86_expand_int_sse_cmp):
	Use gen_sub3_insn instead of indirect function.
	(ix86_expand_ashl_const): Use gen_add2_insn instead of
	indirect function.
	(ix86_adjust_counter): Ditto.

2019-06-13  Jiufu Guo  <guojiufu@linux.ibm.com>
	    Lijia He  <helijia@linux.ibm.com>

	PR tree-optimization/77820
	* tree-ssa-threadedge.c
	(edge_forwards_cmp_to_conditional_jump_through_empty_bb_p): New
	function.
	(thread_across_edge): Add call to
	edge_forwards_cmp_to_conditional_jump_through_empty_bb_p.

2019-06-13  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin-driver.c (validate_macosx_version_min): New.
	(darwin_default_min_version): Cleanup and validate supplied version.
	(darwin_driver_init): Likewise and push cleaned version into opts.

2019-06-13  Jan Hubicka  <hubicka@ucw.cz>

	PR tree-optimization/90869
	* tree-ssa-alias.c (indirect_ref_may_alias_decl_p): Watch for view
	converts in MEM_REF referencing decl rather than view converts
	from decl type to MEM_REF type.

2019-06-13  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/90856
	* tree-sra.c (build_ref_for_model): Only use
	build_reconstructed_reference when address-spaces are the same.

2019-06-13  Jakub Jelinek  <jakub@redhat.com>

	* config/nvptx/nvptx.c (nvptx_sese_number, nvptx_sese_pseudo): Don't
	wrap ei variable name in the declaration in ()s.
	(nvptx_single): Actually use mode_label variable.  Formatting fix.

2019-06-13  Richard Biener  <rguenther@suse.de>

	* tree-vectorizer.h (vect_loop_vectorized_call): Declare.
	* tree-vectorizer.c (vect_loop_vectorized_call): Export and
	also return the condition stmt.
	* tree-vect-loop-manip.c (vect_loop_versioning): Compute outermost
	loop we can version and version that, reusing the loop version
	created by if-conversion instead of versioning again.

2019-06-13  Aldy Hernandez  <aldyh@redhat.com>

	* gimple-loop-versioning.cc (prune_loop_conditions): Use
	may_contain_p.
	* tree-vrp (value_range_base::may_contain_p): Call into
	value_inside_range.
	(value_inside_range): Make private inside value_range_base class.
	Take min/max from *this.
	(range_includes_p): Remove.
	* tree-vrp.h (value_range_base): Add value_inside_range.
	(range_includes_p): Remove.
	(range_includes_zero_p): Call may_contain_p.
	* vr-values.c (compare_range_with_value): Same.

2019-06-13  Claudiu Zissulescu  <claziss@synopsys.com>

	* doc/extend.texi (ARC Function Attributes): Update info.

2019-06-13  Feng Xue  <fxue@os.amperecomputing.com>

	PR tree-optimization/89713
	* doc/invoke.texi (-ffinite-loops): Document new option.
	* common.opt (-ffinite-loops): New option.
	* tree-ssa-dce.c (mark_stmt_if_obviously_necessary): Mark
	IFN_GOACC_LOOP calls as necessary.
	* tree-ssa-loop-niter.c (finite_loop_p): Assume loop with an exit
	is finite.
	* omp-offload.c (oacc_xform_loop): Skip lowering if return value of
	IFN_GOACC_LOOP call is not used.
	* opts.c (default_options_table): Enable -ffinite-loops at -O2+.

2019-06-13  Kugan Vivekanandarajah  <kugan.vivekanandarajah@linaro.org>

	PR target/88838
	* tree-vect-loop-manip.c (vect_set_loop_masks_directly): If the
	compare_type is not with Pmode size, we will create an IV with
	Pmode size with truncated use (i.e. converted to the correct type).
	* tree-vect-loop.c (vect_verify_full_masking): Find IV type.
	(vect_iv_limit_for_full_masking): New. Factored out of
	vect_set_loop_condition_masked.
	* tree-vectorizer.h (LOOP_VINFO_MASK_IV_TYPE): New.
	(vect_iv_limit_for_full_masking): Declare.

2019-06-13  Kugan Vivekanandarajah  <kugan.vivekanandarajah@linaro.org>

	PR target/88834
	* tree-ssa-loop-ivopts.c (get_mem_type_for_internal_fn): Handle
	IFN_MASK_LOAD_LANES and IFN_MASK_STORE_LANES.
	(get_alias_ptr_type_for_ptr_address): Likewise.
	(add_iv_candidate_for_use): Add scaled index candidate if useful.
	* tree-ssa-address.c (preferred_mem_scale_factor): New.
	* config/aarch64/aarch64.c (aarch64_classify_address): Relax
	allow_reg_index_p.

2019-06-13  Kugan Vivekanandarajah  <kugan.vivekanandarajah@linaro.org>

	* config/aarch64/iterators.md (ADDSUB): Fix typo in comment.

2019-06-12  Dimitar Dimitrov  <dimitar@dinux.eu>

	* common/config/pru/pru-common.c: New file.
	* config.gcc: Add PRU target.
	* config/pru/alu-zext.md: New file.
	* config/pru/constraints.md: New file.
	* config/pru/predicates.md: New file.
	* config/pru/pru-opts.h: New file.
	* config/pru/pru-passes.c: New file.
	* config/pru/pru-pragma.c: New file.
	* config/pru/pru-protos.h: New file.
	* config/pru/pru.c: New file.
	* config/pru/pru.h: New file.
	* config/pru/pru.md: New file.
	* config/pru/pru.opt: New file.
	* config/pru/t-pru: New file.
	* doc/extend.texi: Document PRU pragmas.
	* doc/invoke.texi: Document PRU-specific options.
	* doc/md.texi: Document PRU asm constraints.

2019-06-12  Martin Sebor  <msebor@redhat.com>

	PR middle-end/90676
	* tree-pretty-print.c (dump_mem_ref): New function.  Include
	MEM_REF type in output when different size than operand.
	(dump_generic_node): Move code to dump_mem_ref and call it.

2019-06-12  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/90662
	* tree-ssa-strlen.c (get_stridx): Handle simple VLAs and pointers
	to arrays.

2019-06-12  Tom de Vries  <tdevries@suse.de>

	PR tree-optimization/90009
	* config/nvptx/nvptx.c (nvptx_find_par): Assert fork has at most join.

2019-06-12  Martin Liska  <mliska@suse.cz>

	* ggc-common.c (ggc_prune_overhead_list): Do not sanitize
	the created map.
	* hash-map.h: Add sanitize_eq_and_hash into ::hash_map.
	* mem-stats.h (mem_alloc_description::mem_alloc_description):
	Do not sanitize created maps.

2019-06-12  Aldy Hernandez  <aldyh@redhat.com>

	* gimple-ssa-evrp.c (evrp_dom_walker::before_dom_children): Use
	value_range::singleton_p.
	* tree-vrp.c (value_range_constant_singleton): Remove.
	* tree-vrp.h (value_range_constant_singleton): Remove.
	* vr-values.c (vr_values::singleton): Use
	value_range::singleton_p.

2019-06-12  Jakub Jelinek  <jakub@redhat.com>

	PR target/90811
	* cfgexpand.c (align_local_variable): Add really_expand argument,
	don't SET_DECL_ALIGN if it is false.
	(add_stack_var): Add really_expand argument, pass it through to
	align_local_variable.
	(expand_one_stack_var_1): Pass true as really_expand to
	align_local_variable.
	(expand_one_ssa_partition): Pass true as really_expand to
	add_stack_var.
	(expand_one_var): Pass really_expand through to add_stack_var.

2019-06-12  Przemyslaw Wirkus  <przemyslaw.wirkus@arm.com>

	* config/arm/iterators.md (VABAL): New int iterator.
	* config/arm/neon.md (<sup>sadv16qi): New define_expand.
	* config/arm/unspecs.md ("unspec"): Define UNSPEC_VABAL_S,
	UNSPEC_VABAL_U values.

2019-06-12  Martin Liska  <mliska@suse.cz>

	* value-prof.c (stream_out_histogram_value): Only first value
	can't be negative.

2019-06-12  Jakub Jelinek  <jakub@redhat.com>

	PR c/90760
	* symtab.c (symtab_node::set_section): Allow being called on aliases
	as long as they aren't analyzed yet.

2019-06-11  Faraz Shahbazker  <fshahbazker@wavecomp.com>

	* config/mips/mips.c (mips_final_postscan_insn): Modify call
	to `mips_set_text_contents_type' to indicate whether a
	non-debug insn follows.

2019-06-11  Michael Meissner  <meissner@linux.ibm.com>

	* config/rs6000/rs6000-cpus.def (ISA_FUTURE_MASKS_SERVER): Delete
	enabling -mpcrel by default.
	* config/rs6000/rs6000.c (rs6000_option_override_internal): Update
	test for -mpcrel and/or -mprefixed-addr needing -mcpu=future, so
	that the test against -mcpu=future is done first.  Then test if
	-mprefixed-addr is on for -mpcrel.
	(rs6000_disable_incompatible_switches): Add -mcpu=future support.

2019-06-11  Jakub Jelinek  <jakub@redhat.com>

	PR target/90811
	* config/nvptx/nvptx.c (nvptx_output_softstack_switch): Use and.b%d
	instead of and.u%d.

2019-06-11  Marc Glisse  <marc.glisse@inria.fr>

	* match.pd (X/[ex]4<Y/[ex]4): Handle conversions.

2019-06-11  Matthew Beliveau  <mbelivea@redhat.com>

	PR c++/90449 - add -Winaccessible-base option.
	* doc/invoke.texi (Winaccessible-base): Document.

2019-06-11  Marc Glisse  <marc.glisse@inria.fr>

	PR tree-optimization/62041
	* fold-const.c (fold_real_zero_addition_p): Handle vectors.

2019-06-11  Jason Merrill  <jason@redhat.com>

	* gdbhooks.py (TreePrinter.to_string): Recognize ggc_free'd memory.
	* tree.c (get_tree_code_name): Likewise.
	* print-tree.c (print_node): Only briefly print a node with an
	invalid code.

2019-06-11  Jakub Jelinek  <jakub@redhat.com>

	PR bootstrap/90819
	* trans-mem.c (tm_memopt_compute_available): Add assertion
	that blocks is not empty.  Formatting fix.

2019-06-11  Martin Liska  <mliska@suse.cz>

	PR c++/87847
	* hash-table.h: Extend create_gcc, add one parameter
	that is passed into hash_table::hash_table.

2019-06-10  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386-protos.h (ix86_split_fp_absneg_operator):
	New prototype.
	* config/i386/i386-expand.c (ix86_expand_fp_absneg_operator):
	Emit clobber also for non-sse operations.
	(ix86_split_fp_absneg_operator): New function.
	* config/i386/i386.md (SSEMODEF): New mode iterator.
	(ssevecmodef): New mode attribute.
	(<code>tf2): Use absneg code iterator.
	(*<code>tf2_1): Rename from *absnegtf3_sse. Use absneg code iterator.
	Add three-operand AVX alternatives.
	(*<code><mode>2_i387_1): Rename from *absnegxf2_i387.
	Use absneg code iterator and X87MODEF mode iterator.
	(absneg fp_reg non-sse splitter): Call absneg code iterator
	and X87MODEF mode iterator.
	(absneg general_reg non-sse splitter): Use absneg code iterator
	and X87MODEF mode iterator.  Use ix86_split_fp_absneg_operator.
	(*<code><mode>2_1): Rename from *absneg<mode>2.  Use absneg
	code iterator.  Add three-operand AVX alternative.
	(absneg sse_reg splitter): Use absneg code iterator
	and SSEMODEF mode iterator.  Handle AVX operands.
	(absneg fp_reg splitter): Use absneg code iterator
	and MODEF mode iterator.
	(absneg general_reg splitter): Merge splitters using MODEF mode
	iterator.  Use absneg code iterator.  Call
	ix86_split_fp_absneg_operator.
	(*<code><mode>2_i387): Rename from *<code><mode>2_1.
	Do not enable for non-sse modes before reload.
	(CSGNMODE): Remove.
	(CSGNVMODE): Ditto.
	(copysing<mode>3): Use SSEMODEF instead of CSGNMODE and
	ssevecmodef mode attribute instaed of CSGNVMODE.
	(copysign<mode>3_const): Ditto.
	(copysign<mode>3_var): Ditto.
	* config/i386/i386.md (*<code><mode>2): Rename from *absneg<mode>2.
	Use absneg code iterator.  Simplify code using std::swap.
	* config/i386/predicates.md (absneg_operator): Remove.

2019-06-10  Martin Sebor  <msebor@redhat.com>

	* gimple-fold.c (get_range_strlen): Update comment that didn't
	make it into r267503 or related commits.

2019-06-10  Vladislav Ivanishin  <vlad@ispras.ru>

	* gcov-tool.c (merge_usage, rewrite_usage): Mark with
	ATTRIBUTE_NORETURN thus making consistent with overlap_usage.

2019-06-10  Jakub Jelinek  <jakub@redhat.com>

	* tree.def (OMP_SCAN): New tree code.
	* tree-core.h (enum omp_clause_code): Add OMP_CLAUSE_INCLUSIVE and
	OMP_CLAUSE_EXCLUSIVE.
	* tree.h (OMP_CLAUSES): Use OMP_SCAN instead of OMP_TASKGROUP.
	(OMP_SCAN_BODY, OMP_SCAN_CLAUSES): Define.
	* tree.c (omp_clause_num_ops, omp_clause_code_name): Add entries for
	OMP_CLAUSE_{IN,EX}CLUSIVE.
	(walk_tree_1): Handle OMP_CLAUSE_{IN,EX}CLUSIVE.
	* tree-nested.c (convert_nonlocal_reference_stmt,
	convert_local_reference_stmt, convert_gimple_call): Handle
	GIMPLE_OMP_SCAN.
	* tree-pretty-print.c (dump_omp_clause): Handle
	OMP_CLAUSE_{IN,EX}CLUSIVE.
	(dump_generic_node): Handle OMP_SCAN.
	* gimple.def (GIMPLE_OMP_SCAN): New gimple code.
	* gimple.h (gomp_scan): New type.
	(is_a_helper <gomp_scan *>::test,
	is_a_helper <const gomp_scan *>::test): New templates.
	(gimple_build_omp_scan): Declare.
	(gimple_omp_scan_clauses, gimple_omp_scan_clauses_ptr,
	gimple_omp_scan_set_clauses): New inline functions.
	(CASE_GIMPLE_OMP): Add case GIMPLE_OMP_SCAN:.
	* gimple.c (gimple_build_omp_scan): New function.
	(gimple_copy): Handle GIMPLE_OMP_SCAN.
	* gimple-walk.c (walk_gimple_op, walk_gimple_stmt): Likewise.
	* gimple-pretty-print.c (dump_gimple_omp_block): Don't handle
	GIMPLE_OMP_TASKGROUP.
	(dump_gimple_omp_scan): New function.
	(pp_gimple_stmt_1): Handle GIMPLE_OMP_SCAN.
	* gimple-low.c (lower_stmt): Handle GIMPLE_OMP_SCAN.
	* tree-inline.c (remap_gimple_stmt, estimate_num_insns): Likewise.
	* gimplify.c (enum gimplify_omp_var_data): Add GOVD_REDUCTION_INSCAN.
	(is_gimple_stmt): Handle OMP_SCAN.
	(gimplify_scan_omp_clauses): Reject inscan reductions on constructs
	other than OMP_FOR or OMP_SIMD.  Handle OMP_CLAUSE_{IN,EX}CLUSIVE.
	(gimplify_adjust_omp_clauses): Diagnose inscan reductions not
	mentioned in nested #pragma omp scan.  Handle
	OMP_CLAUSE_{IN,EX}CLUSIVE.
	(gimplify_expr): Handle OMP_SCAN.
	* omp-low.c (check_omp_nesting_restrictions): For parent context,
	look through GIMPLE_OMP_SCAN context.  Allow #pragma omp scan in
	simd constructs.
	(scan_omp_1_stmt, lower_omp_1, diagnose_sb_1, diagnose_sb_2): Handle
	GIMPLE_OMP_SCAN.

2019-06-10  Martin Liska  <mliska@suse.cz>

	* ipa-cp.c (ignore_edge_p): New function.
	(build_toporder_info): Use it.
	* ipa-inline.c (ignore_edge_p): New function.
	(inline_small_functions): Use it.
	* ipa-pure-const.c (ignore_edge_for_nothrow):
	Verify opt_for_fn for caller and callee.
	(ignore_edge_for_pure_const): Likewise.
	* ipa-reference.c (ignore_edge_p): Extend to check
	for opt_for_fn.
	* ipa-utils.c (searchc): Refactor.
	* ipa-utils.h: Fix coding style.

2019-06-10  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.c (arc_rtx_costs): Update costs.

2019-06-10  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc-protos.h (arc_check_ior_const): Declare.
	(arc_split_ior): Likewise.
	(arc_check_mov_const): Likewise.
	(arc_split_mov_const): Likewise.
	* config/arc/arc.c (arc_print_operand): Fix 'z' letter.
	(arc_rtx_costs): Replace check Crr with Cax constraint.
	(prepare_move_operands): Cleanup, remove unused code.
	(arc_split_ior): New function.
	(arc_check_ior_const): Likewise.
	(arc_split_mov_const): Likewise.
	(arc_check_mov_const): Likewise.
	* config/arc/arc.md (movsi_insn): Restructure it, and convert it
	in define_insn_and_split pattern.
	(iorsi3): Likewise.
	(mulsi3_v2): Add new matching variant.
	(andsi3_i): Cleanup pattern.
	(rotrsi3_cnt1): Update pattern.
	(rotrsi3_cnt8): New pattern.
	(ashlsi2_cnt8): Likewise.
	(ashlsi2_cnt16): Likewise.
	* config/arc/constraints.md (C0p): Update constraint.
	(Crr): Remove it.
	(C0x): New pattern.
	(Cax): New pattern.

2019-06-10  Martin Liska  <mliska@suse.cz>

	* ipa-icf.c (sem_item_optimizer::parse_nonsingleton_classes):
	Update coding style.
	(sem_item_optimizer::dump_cong_classes):
	Print how many items are in a non-singular class.  Improve
	coding style.

2019-06-10  Martin Liska  <mliska@suse.cz>

	* value-prof.c (dump_histogram_value): Change dump format.
	(gimple_mod_subtract_transform): Remove legacy comment.

2019-06-10  Martin Liska  <mliska@suse.cz>

	* value-prof.c (dump_histogram_value): Print histogram values
	only if present.

2019-06-10  Martin Liska  <mliska@suse.cz>

	* gcov-io.h (GCOV_DISK_SINGLE_VALUES): New.
	(GCOV_SINGLE_VALUE_COUNTERS): Likewise.
	* ipa-profile.c (ipa_profile_generate_summary):
	Use get_most_common_single_value.
	* tree-profile.c (gimple_init_gcov_profiler):
	Instrument with __gcov_one_value_profiler_v2
	and __gcov_indirect_call_profiler_v4.
	* value-prof.c (dump_histogram_value):
	Print all values for HIST_TYPE_SINGLE_VALUE.
	(stream_out_histogram_value): Update assert for
	N values.
	(stream_in_histogram_value): Set number of
	counters for HIST_TYPE_SINGLE_VALUE.
	(get_most_common_single_value): New.
	(gimple_divmod_fixed_value_transform):
	Use get_most_common_single_value.
	(gimple_ic_transform): Likewise.
	(gimple_stringops_transform): Likewise.
	(gimple_find_values_to_profile): Set number
	of counters for HIST_TYPE_SINGLE_VALUE.
	* value-prof.h (get_most_common_single_value): New.

2019-06-10  Martin Liska  <mliska@suse.cz>

	* hash-map.h: Pass default value to hash_table ctor.
	* hash-table.h: Add default value to call of a ctor.

2019-06-08  Jonathan Wakely  <jwakely@redhat.com>

	* doc/invoke.texi (C Dialect Options): Minor grammatical change.
	(x86 Options): Replace all uses of "PCL_MUL" with "PCLMUL"

2019-06-07  John David Anglin  <danglin@gcc.gnu.orig>

	PR target/90751
	* config/pa/pa-linux.h (ASM_DECLARE_FUNCTION_NAME): Update comment.
	Call pa_output_function_label.
	(TARGET_ASM_FUNCTION_PROLOGUE): define.
	* config/pa/pa-protos.h (pa_output_function_label): Declare.
	* config/pa/pa.c (pa_output_function_prologue): Add ATTRIBUTE_UNUSED
	to declaration.
	(pa_linux_output_function_prologue): Declare.
	(TARGET_ASM_FUNCTION_PROLOGUE): Delete define.
	(pa_output_function_label): New.
	(pa_output_function_prologue): Revise to use pa_output_function_label.
	(pa_linux_output_function_prologue): New.
	* config/pa/pa.h (TARGET_ASM_FUNCTION_PROLOGUE): Define.

2019-06-07  Aldy Hernandez  <aldyh@redhat.com>

	* tree-vrp.h (value_range_base::intersect): New.
	(value_range::intersect_helper): Move from here...
	(value_range_base::intersect_helper): ...to here.
	* tree-vrp.c (value_range::intersect_helper): Rename to...
	(value_range_base::intersect_helper): ...this, and rewrite to
	return a value instead of modifying THIS in place.
	Also, move equivalence handling...
	(value_range::intersect): ...here, while calling intersect_helper.
	* gimple-fold.c (size_must_be_zero_p): Use value_range_base when
	calling intersect.
	* gimple-ssa-evrp-analyze.c (ecord_ranges_from_incoming_edge):
	Same.
	* vr-values.c (vrp_evaluate_conditional_warnv_with_ops): Same.

2019-06-07  Jakub Jelinek  <jakub@redhat.com>

	* Makefile.in (genprogerr): Add condmd.
	(genprog): Remove it here.

2019-06-07  Andrew Stubbs  <ams@codesourcery.com>

	* doc/invoke.texi (AMD GCN Options): Add gfx906.

2019-06-07  Richard Biener  <rguenther@suse.de>

	PR debug/90574
	* tree-cfg.c (stmt_starts_bb_p): Split blocks at labels
	that appear after user labels.

2019-06-07  Martin Liska  <mliska@suse.cz>

	* cselib.c (cselib_init): Disable hash table
	sanitization.
	* hash-set.h: Pass new default argument to m_table.
	* hash-table.c: Add global variable with hash table
	sanitization limit.
	* hash-table.h (Allocator>::hash_table): Add new argument
	to ctor.
	(hashtab_chk_error): New.
	* params.def (PARAM_HASH_TABLE_VERIFICATION_LIMIT): New.
	* toplev.c (process_options): Set hash_table_sanitize_eq_limit
	from the PARAM_HASH_TABLE_VERIFICATION_LIMIT value.

2019-06-07  Jan Hubicka  <hubicka@ucw.cz>

	* common.opt (flto-odr-type-merging): Ignore.
	* invoke.texi (-flto-odr-type-merging): Remove.
	* ipa-devirt.c (odr_vtable_hasher:odr_name_hasher): Remove.
	(can_be_vtable_hashed_p): Remove.
	(hash_odr_vtable): Remove.
	(odr_vtable_hasher::hash): Remove.
	(types_same_for_odr): Remove.
	(types_odr_comparable): Remove.
	(odr_vtable_hasher::equal): Remove.
	(odr_vtable_hash_type, odr_vtable_hash): Remove.
	(add_type_duplicate): Do not synchronize vtable and name hashtables.
	(get_odr_type): Do not use vtable hash.
	(dump_odr_type): Remove commented out code.
	(build_type_inheritance_graph): Do not allocate vtable hash.
	(rebuild_type_inheritance_graph): Do not delete vtable hash.
	* ipa-utils.h (type_with_linkage_p): Drop vtable hash path.
	(odr_type_p): Likewise.
	* tree.c (need_assembler_name_p): Remove flag_lto_odr_type_mering
	test.

2019-06-07  Jan Hubicka  <hubicka@ucw.cz>

	* tree-ssa-alias.c (aliasing_component_refs_p): Do not give up
	immediately after same_types_for_tbaa_p returns -1 and continue
	looking for possible exact match; if matching types are arrays
	watch for partial overlaps.
	(indirect_ref_may_alias_decl_p): Watch for partial array overlaps.
	(indirect_refs_may_alias_p): Do type based disambiguation first;
	update comment.

2019-06-07  Richard Sandiford  <richard.sandiford@arm.com>

	* fwprop.c (propagate_rtx): Fix call to paradoxical_subreg_p.

2019-06-07  Martin Liska  <mliska@suse.cz>

	* doc/invoke.texi: Remove param.
	* gcov-counter.def (GCOV_COUNTER_ICALL_TOPNV):
	Remove.
	* gcov-io.h (GCOV_ICALL_TOPN_VAL): Likewise.
	(GCOV_ICALL_TOPN_NCOUNTS): Likewise.
	* params.def (PARAM_INDIR_CALL_TOPN_PROFILE): Likewise.
	* profile.c (instrument_values): Remove
	HIST_TYPE_INDIR_CALL_TOPN.
	* tree-profile.c (init_ic_make_global_vars):
	Always build __gcov_indirect_call only.
	(gimple_init_gcov_profiler): Remove usage
	of PARAM_INDIR_CALL_TOPN_PROFILE.
	(gimple_gen_ic_profiler): Likewise.
	* value-prof.c (dump_histogram_value): Likewise.
	(stream_in_histogram_value): Likewise.
	(gimple_indirect_call_to_profile): Likewise.
	(gimple_find_values_to_profile): Likewise.
	* value-prof.h (enum hist_type): Likewise.

2019-06-07  Martin Liska  <mliska@suse.cz>

	* tree-ssa-loop.c (get_lsm_tmp_name): Return at the end of the
	function.

2019-06-07  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/78902
	* builtin-attrs.def (ATTR_WARN_UNUSED_RESULT): New.
	(ATTR_MALLOC_NOTHROW_LEAF_LIST): Remove.
	(ATTR_WARN_UNUSED_RESULT_NOTHROW_LEAF_LIST): New.
	(ATTR_MALLOC_WARN_UNUSED_RESULT_NOTHROW_LEAF_LIST): New.
	(ATTR_ALLOC_SIZE_2_NOTHROW_LIST): Remove.
	(ATTR_MALLOC_SIZE_1_NOTHROW_LEAF_LIST): Remove.
	(ATTR_MALLOC_WARN_UNUSED_RESULT_NOTHROW_LIST): New.
	(ATTR_ALLOC_WARN_UNUSED_RESULT_SIZE_2_NOTHROW_LIST): New.
	(ATTR_MALLOC_WARN_UNUSED_RESULT_SIZE_1_NOTHROW_LEAF_LIST): New.
	(ATTR_ALLOCA_SIZE_1_NOTHROW_LEAF_LIST): Remove.
	(ATTR_ALLOCA_WARN_UNUSED_RESULT_SIZE_1_NOTHROW_LEAF_LIST): New.
	(ATTR_MALLOC_SIZE_1_2_NOTHROW_LEAF_LIST): Remove.
	(ATTR_MALLOC_WARN_UNUSED_RESULT_SIZE_1_2_NOTHROW_LEAF_LIST):
	New.
	(ATTR_ALLOC_SIZE_2_NOTHROW_LEAF_LIST): Remove.
	(ATTR_ALLOC_WARN_UNUSED_RESULT_SIZE_2_NOTHROW_LEAF_LIST): New.
	(ATTR_MALLOC_NOTHROW_NONNULL): Remove.
	(ATTR_WARN_UNUSED_RESULT_NOTHROW_NONNULL): New.
	(ATTR_MALLOC_WARN_UNUSED_RESULT_NOTHROW_NONNULL): New.
	(ATTR_MALLOC_NOTHROW_NONNULL_LEAF): Remove.
	(ATTR_WARN_UNUSED_RESULT_NOTHROW_NONNULL_LEAF): New.
	(ATTR_MALLOC_WARN_UNUSED_RESULT_NOTHROW_NONNULL_LEAF): New.
	* builtins.def (BUILT_IN_ALIGNED_ALLOC): Change to use
	warn_unused_result attribute.
	(BUILT_IN_STRDUP): Likewise.
	(BUILT_IN_STRNDUP): Likewise.
	(BUILT_IN_ALLOCA): Likewise.
	(BUILT_IN_CALLOC): Likewise.
	(BUILT_IN_MALLOC): Likewise.
	(BUILT_IN_REALLOC): Likewise.

2019-06-06  Jim Wilson  <jimw@sifive.com>

	PR target/89955
	* config/riscv/riscv.h (STARTFILE_PREFIX_SPEC): Deleted.
	* config/riscv/freebsd.h (STARTFILE_PREFIX_SPEC): Added.
	* config/riscv/linux.h (STARTFILE_PREFIX_SPEC): Added.

2019-06-06  Martin Sebor  <msebor@redhat.com>

	* tree-ssa-strlen.c (adjust_related_strinfos): Avoid trailing article.
	(handle_builtin_malloc): Remove trailing spaces.
	(handle_builtin_memset): Same.
	(handle_builtin_memcmp): Same.
	(compute_string_length): Same.
	(determine_min_objsize): Same.
	(handle_builtin_string_cmp): Same.
	(handle_char_store): Same.  Break up excessively long line.

2019-06-06  Martin Jambor  <mjambor@suse.cz>

	* tree-sra.c (build_reconstructed_reference): Drop the alignment
	check.

2019-06-06  Martin Jambor  <mjambor@suse.cz>

	* tree-sra.c (struct access): New field grp_same_access_path.
	(dump_access): Dump it.
	(build_reconstructed_reference): New function.
	(build_ref_for_model): Use it if possible.
	(path_comparable_for_same_access): New function.
	(same_access_path_p): Likewise.
	(sort_and_splice_var_accesses): Set the new flag.
	(analyze_access_subtree): Likewise.
	(propagate_subaccesses_across_link): Propagate zero value of the new
	flag down the access tree.

2019-06-06  Andrew Stubbs  <ams@codesourcery.com>

	* config.gcc (amdgcn-*-*): Allow --with-arch=gfx906.
	* config/gcn/gcn.opt (gpu_type): Add gfx906.
	* config/gcn/t-gcn-hsa (MULTILIB_OPTIONS): Add gfx906 multilib.
	(MULTILIB_DIRNAMES): Rename gcn5 to gfx900.
	Add gfx906.

2019-06-06  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	PR tree-optimization/90332
	* config/aarch64/aarch64.c (aarch64_expand_vector_init):
	Handle VALS containing two vectors.
	* config/aarch64/aarch64-simd.md (*aarch64_combinez<mode>): Rename
	to...
	(@aarch64_combinez<mode>): ... This.
	(*aarch64_combinez_be<mode>): Rename to...
	(@aarch64_combinez_be<mode>): ... This.
	(vec_init<mode><Vhalf>): New define_expand.
	* config/aarch64/iterators.md (Vhalf): Handle V8HF.

2019-06-06  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config/msp430/msp430.md (ashlhi3): Use the const_variant of shift
	library functions only when not optimizing for size.
	(ashlsi3): Likewise.
	(ashrhi3): Likewise.
	(ashrsi3): Likewise.
	(lshrhi3): Likewise.
	(lshrsi3): Likewise.

2019-06-06  Andreas Krebbel  <krebbel@linux.ibm.com>

	PR rtl-optimization/88751
	* ira.c (ira): Use the number of the actually referenced registers
	when calculating the threshold.

2019-06-06  Jakub Jelinek  <jakub@redhat.com>

	* configure: Regenerate.

2019-06-06  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config/msp430/msp430.md (ashlhi3): Force shift src operand into a
	register if it is in memory, so the shift can be emulated with a rotate
	instruction.
	(ashrhi3): Likewise.
	(lshrhi3): Likewise.

2019-06-06  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/87954
	* match.pd: Simplify mult where both arguments are 0 or 1.

2019-06-06  Richard Biener  <rguenther@suse.de>

	* vr-values.c (vr_values::extract_range_from_ssa_name): Do not
	put equivalences on UNDEFINED ranges.
	* gimple-ssa-evrp.c (evrp_dom_walker::before_dom_children):
	Make sure to drop defs of stmts added during simplification
	to VARYING.

2019-06-06  Richard Biener  <rguenther@suse.de>

	* tree-ssa-structalias.c: Include tree-cfg.h.
	(make_heapvar): Do not make heap vars artificial.
	(find_func_aliases_for_builtin_call): Handle stack allocation
	functions.
	(find_func_aliases): Delay processing of simple enough returns
	in non-IPA mode.
	(set_uids_in_ptset): Adjust.
	(find_what_var_points_to): Likewise.
	(solve_constraints): Do not dump points-to sets here.
	(compute_points_to_sets): Post-process return statements,
	amending the escaped solution.  Dump points-to sets afterwards.
	(ipa_pta_execute): Dump points-to sets.

2019-06-06  Martin Liska  <mliska@suse.cz>

	PR web/87933
	* doc/install.texi: Fix HTML headers and
	titles for 'Installing GCC' pages.

2019-06-06  Martin Liska  <mliska@suse.cz>

	* ipa-icf-gimple.h (dump_message_1): Remove.
	(dump_message): Likewise.
	(return_false_with_message_1): Print also file.
	(return_false_with_msg): Likewise.
	(return_with_result): Likewise.
	(return_with_debug): Likewise.
	* ipa-icf.c (sem_function::equals_private): Remove call
	to dump_message.

2019-06-05  Hongtao Liu  <hongtao.liu@intel.com>

	* config/i386/sse.md (define_mode_suffix vecmemsuffix): New.
	(define_insn "avx512dq_fpclass<mode><mask_scalar_merge_name>"): Enable
	memory operand for it.
	(define_insn "avx512dq_vmfpclass<mode><mask_scalar_merge_name>"): Ditto.

2019-06-05  Martin Sebor  <msebor@redhat.com>

	* config/i386/i386-features.c (ix86_get_function_versions_dispatcher):
	Adjust quoting and hyphenation.
	* convert.c (convert_to_real_1): Same.
	* gcc.c (driver_wrong_lang_callback): Same.
	(driver::handle_unrecognized_options): Same.
	* gimple-ssa-nonnull-compare.c (do_warn_nonnull_compare): Same.
	* opts-common.c (cmdline_handle_error): Same.
	(read_cmdline_option): Same.
	* opts-global.c (complain_wrong_lang): Same.
	(print_ignored_options): Same.
	(handle_common_deferred_options): Same.
	* pretty-print.h: Same.
	* print-rtl.c (debug_bb_n_slim): Same.
	* sched-rgn.c (make_pass_sched_fusion): Same.
	* tree-cfg.c (verify_gimple_assign_unary): Same.
	(verify_gimple_label): Same.
	* tree-ssa-operands.c (verify_ssa_operands): Same.
	* varasm.c (do_assemble_alias): Same.
	(assemble_alias): Same.

2019-06-05  Richard Henderson  <rth@twiddle.net>

	* config/alpha/alpha.c (direct_return): Move down after
	struct machine_function definition; use saved frame_size;
	return bool.
	(struct machine_function): Add sa_mask, sa_size, frame_size.
	(alpha_sa_mask, alpha_sa_size, compute_frame_size): Merge into ...
	(alpha_compute_frame_layout): ... new function.
	(TARGET_COMPUTE_FRAME_LAYOUT): New.
	(alpha_initial_elimination_offset): Use saved sa_size.
	(alpha_vms_initial_elimination_offset): Likewise.
	(alpha_vms_can_eliminate): Remove alpha_sa_size call.
	(alpha_expand_prologue): Use saved frame data.  Merge integer
	and fp register save loops.
	(alpha_expand_epilogue): Likewise.
	(alpha_start_function): Use saved frame data.
	* config/alpha/alpha-protos.h (direct_return): Update.
	(alpha_sa_size): Remove.

2019-06-05  Eric Botcazou  <ebotcazou@adacore.com>

	* fold-const.c (extract_muldiv_1) <PLUS_EXPR>: Do not distribute a
	multiplication by a power-of-two value.
	(fold_plusminus_mult_expr): Use pow2p_hwi to spot a power-of-two value
	and turn the modulo operation into a masking operation.

2019-06-05  Jakub Jelinek  <jakub@redhat.com>

	PR debug/90733
	* var-tracking.c (vt_expand_loc_callback): Don't create raw subregs
	with VOIDmode inner operands.

2019-06-05  Richard Biener  <rguenther@suse.de>

	PR middle-end/90726
	* tree-ssa-loop-niter.c (expand_simple_operations): Do not
	turn an expression graph into a tree.

2019-06-05  Jakub Jelinek  <jakub@redhat.com>

	* omp-expand.c (struct omp_region): Add has_lastprivate_conditional
	member.
	(expand_parallel_call): If region->inner->has_lastprivate_conditional,
	treat it like explicit monotonic schedule modifier.
	(expand_omp_for): Initialize has_lastprivate_conditional.
	If fd.lastprivate_conditional != 0, treat it like explicit monotonic
	schedule modifier.

	* omp-low.c (lower_rec_input_clauses): For lastprivate conditional
	references, lookup in in hash map MEM_REF operand instead of the
	MEM_REF itself.
	(lower_omp_1): When looking for lastprivate conditional assignments,
	handle MEM_REFs with REFERENCE_TYPE operands.

	* omp-low.c (lower_rec_input_clauses): Force max_vf if is_simd and
	on privatization clauses OMP_CLAUSE_DECL is privatized by reference
	and references a VLA.  Handle references to non-VLAs if is_simd
	all privatization clauses like reductions.
	(lower_rec_input_clauses) <case do_private, case do_firstprivate>:
	If omp_is_reference, use always omp simd arrays and set
	DECL_VALUE_EXPR in that case, if lower_rec_simd_input_clauses
	fails, emit reference initialization.

2019-06-05  Hongtao Liu  <hongtao.liu@intel.com>

	PR target/89803
	* config/i386/avx512dqintrin.h (_mm_mask_fpclass_ss_mask,
	_mm_mask_fpclass_sd_mask): New intrinsics.
	(_mm_fpclass_ss_mask, _mm_fpclass_sd_mask): Modified, use new builtins.
	* config/i386/i386-builtin.def
	(__builtin_ia32_fpclassss_mask, __builtin_ia32_fpclasssd_mask):
	New builtins.
	(__builtin_ia32_fpclassss, __builtin_ia32_fpclasssd): Deleted.
	* config/i386/i386-builtin-types.def (DEF_FUNCTION_TYPE (QI, V2DF, INT),
	DEF_FUNCTION_TYPE (QI, V4SF, INT)): Deleted.
	* config/i386/i386-expand.c (case QI_FTYPE_V4SF_INT,
	case QI_FTYPE_V2SF_INT): Ditto.
	* config/i386/sse.md
	(define_insn "avx512dq_vmfpclass<mode><mask_scalar_merge_name>):
	Extended to insnstructions with mask operands.

2019-06-04  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/constraints.md (define_register_constraint "wp"):
	Delete.
	(define_register_constraint "wq"): Delete.
	* config/rs6000/rs6000.c (rs6000_debug_reg_global): Adjust.
	(rs6000_init_hard_regno_mode_ok): Adjust.
	* config/rs6000/rs6000.h (enum r6000_reg_class_enum): Delete
	RS6000_CONSTRAINT_wp and RS6000_CONSTRAINT_wq.
	* config/rs6000/vsx.md (define_mode_attr VSr3): Delete.
	(define_mode_attr VSa): Delete.
	(define_mode_attr VSisa): New.
	(rest of file): Adjust.
	* doc/md.texi (Machine Constraints): Adjust.

2019-06-04  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (define_attr "isa"): Add p9kf and p9tf.
	(define_attr "enabled"): Handle those new isa values.

2019-06-04  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/vsx.md (define_mode_attr VSr4): Delete.
	(define_mode_attr VSr5): Delete.
	(define_mode_attr VStype_sqrt): Delete.
	(define_mode_iterator VSX_SPDP): Delete.
	(define_mode_attr VS_spdp_res): Delete.
	(define_mode_attr VS_spdp_insn): Delete.
	(define_mode_attr VS_spdp_type): Delete.
	(*vsx_sqrt<mode>2): Adjust.
	(vsx_<VS_spdp_insn>): Delete, split to...
	(vsx_xscvdpsp): ... this.  New.  And...
	(vsx_xvcvspdp): ... this.  New.  And...
	(vsx_xvcvdpsp): ... this.  New.

2019-06-04  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (define_mode_attr sd): Add values for V4SF
	and V2DF.
	* config/rs6000/vsx.md (define_mode_attr VSs): Delete.
	(rest of file): Adjust.

2019-06-04  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/vsx.md (vsx_<VS_spdp_insn>): Use wa instead of <VSa>.
	(vsx_extract_<mode>_var): Ditto.

2019-06-04  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/vsx.md: Replace all <VSa> that are used with VSX_TI
	with just "wa".

2019-06-04  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/constraints.md (define_register_constraint "ww"):
	Delete.
	* config/rs6000/rs6000.c (rs6000_debug_reg_global): Adjust.
	(rs6000_init_hard_regno_mode_ok): Adjust.
	* config/rs6000/rs6000.h (enum r6000_reg_class_enum): Delete
	RS6000_CONSTRAINT_ww.
	* config/rs6000/rs6000.md: Adjust.
	* config/rs6000/vsx.md: Adjust.
	* doc/md.texi (Machine Constraints): Adjust.

2019-06-04  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (SFDF, SFDF2): Adjust comments.
	(define_mode_attr sd): New.
	(define_mode_attr s): New.
	(define_mode_attr Ftrad): Delete.
	(define_mode_attr Fvsx): Delete.
	(define_mode_attr Fs): Delete.
	(rest of file): Use the new mode attributes.
	* config.rs6000/vsx.md: Use the new mode attributes.

2019-06-04  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/vsx.md: Replace all <VSa> that are used with VSX_W
	with just "wa".

2019-06-04  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/vsx.md (define_mode_attr VSr2): Delete.
	(rest of file): Replace all <VSa>, <VSr>, <VSr2>, and <VSr3> that are
	used with VSX_B, VSX_D, or VSX_F, with just "wa".

2019-06-04  Bill Schmidt  <wschmidt@linux.ibm.com>

	PR target/78263
	* config/rs6000/altivec.h: Don't #define vector, pixel, bool for
	C++ with strict ANSI requirements.

2019-06-04  Marc Glisse  <marc.glisse@inria.fr>

	* tree-ssa-loop-niter.c (number_of_iterations_ne): Skip
	computations when step is 1.

2019-06-04  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/constraints.md (define_register_constraint "wf"):
	Delete.
	* config/rs6000/rs6000.c (rs6000_debug_reg_global): Adjust.
	(rs6000_init_hard_regno_mode_ok): Adjust.
	* config/rs6000/rs6000.h (enum r6000_reg_class_enum): Delete
	RS6000_CONSTRAINT_wf.
	* config/rs6000/rs6000.md: Adjust.
	* config/rs6000/vsx.md: Adjust.
	* doc/md.texi (Machine Constraints): Adjust.

2019-06-04  Andrew Pinski  <apinski@marvell.com>

	* config/aarch64/aarch64.c (aarch64_asan_shadow_offset):
	Fix ILP32 value.

2019-06-04  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/constraints.md (define_register_constraint "wd"):
	Delete.
	* config/rs6000/rs6000.c (rs6000_debug_reg_global): Adjust.
	(rs6000_init_hard_regno_mode_ok): Adjust.
	* config/rs6000/rs6000.h (enum r6000_reg_class_enum): Delete
	RS6000_CONSTRAINT_wd.
	* config/rs6000/rs6000.md: Adjust.
	* config/rs6000/vsx.md: Adjust.
	* doc/md.texi (Machine Constraints): Adjust.

2019-06-04  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (define_mode_attr Fv2): Delete.
	(rest of file): Adjust.

2019-06-04  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/vsx.md (define_mode_attr VS_64reg): Delete.
	(*vsx_extract_<P:mode>_<VSX_D:mode>_load): Adjust.
	(vsx_splat_<mode>_reg): Adjust.

2019-06-04  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/constraints.md (define_register_constraint "ws"):
	Delete.
	* config/rs6000/rs6000.c (rs6000_debug_reg_global): Adjust.
	(rs6000_init_hard_regno_mode_ok): Adjust.
	* config/rs6000/rs6000.h (enum r6000_reg_class_enum): Delete
	RS6000_CONSTRAINT_ws.
	* config/rs6000/rs6000.md: Adjust.
	* config/rs6000/vsx.md: Adjust.
	* doc/md.texi (Machine Constraints): Adjust.

2019-06-04  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/constraints.md (define_register_constraint "wv"):
	Delete.
	* config/rs6000/rs6000.c (rs6000_debug_reg_global): Adjust.
	(rs6000_init_hard_regno_mode_ok): Adjust.
	* config/rs6000/rs6000.h (enum r6000_reg_class_enum): Delete
	RS6000_CONSTRAINT_wv.
	* config/rs6000/rs6000.md: Adjust.
	* config/rs6000/vsx.md: Adjust.
	* doc/md.texi (Machine Constraints): Adjust.

2019-06-04  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/constraints.md (define_register_constraint "wi"):
	Delete.
	(define_register_constraint "wt"): Delete.
	* config/rs6000/rs6000.c (rs6000_debug_reg_global): Adjust.
	(rs6000_init_hard_regno_mode_ok): Adjust.
	* config/rs6000/rs6000.h (enum r6000_reg_class_enum): Delete
	RS6000_CONSTRAINT_wi and RS6000_CONSTRAINT_wt.
	* config/rs6000/rs6000.md: Adjust.
	* config/rs6000/vsx.md: Adjust.
	* doc/md.texi (Machine Constraints): Adjust.

2019-06-04  Szabolcs Nagy  <szabolcs.nagy@arm.com>

	* config/aarch64/aarch64-protos.h (aarch64_asm_output_external): Remove
	const.
	* config/aarch64/aarch64.c (aarch64_asm_output_external): Call
	default_elf_asm_output_external.

2019-06-04  Martin Liska  <mliska@suse.cz>

	* ipa-icf.c (INCLUDE_LIST): Remove.
	(sem_item_optimizer::execute): Remove call to init_wpa.
	* ipa-icf.h (init_wpa): Remove.

2019-06-04  Jakub Jelinek  <jakub@redhat.com>

	* gimplify.c (gimplify_scan_omp_clauses): Don't sorry_at on lastprivate
	conditional on combined for simd.
	* omp-low.c (struct omp_context): Add combined_into_simd_safelen0
	member.
	(lower_rec_input_clauses): For gimple_omp_for_combined_into_p max_vf 1
	constructs, don't remove lastprivate_conditional_map, but instead set
	ctx->combined_into_simd_safelen0 and adjust hash_map, so that it points
	to parent construct temporaries.
	(lower_lastprivate_clauses): Handle ctx->combined_into_simd_safelen0
	like !ctx->lastprivate_conditional_map.
	(lower_omp_1) <case GIMPLE_ASSIGN>: If up->combined_into_simd_safelen0,
	use up->outer context instead of up.
	* omp-expand.c (expand_omp_for_generic): Perform cond_var bump even if
	gimple_omp_for_combined_p.
	(expand_omp_for_static_nochunk): Likewise.
	(expand_omp_for_static_chunk): Add forgotten cond_var bump that was
	probably moved over into expand_omp_for_generic rather than being copied
	there.

2019-06-04  Martin Liska  <mliska@suse.cz>

	* value-prof.c (dump_histogram_value): Fix typo.
	(gimple_mod_subtract_transform): Likewise.

2019-06-04  Richard Biener  <rguenther@suse.de>

	PR middle-end/90726
	* tree-chrec.c (chrec_contains_symbols): Add to visited.
	(tree_contains_chrecs): Likewise.
	(chrec_contains_symbols_defined_in_loop): Move here and avoid
	exponential behaivor from ...
	* tree-scalar-evolution.c (chrec_contains_symbols_defined_in_loop):
	... here.
	(expression_expensive_p): Avoid exponential behavior and compute
	expanded size, rejecting any expansion.
	* tree-ssa-loop-ivopts.c (abnormal_ssa_name_p): Remove.
	(idx_contains_abnormal_ssa_name_p): Likewise.
	(contains_abnormal_ssa_name_p_1): New helper for walk_tree.
	(contains_abnormal_ssa_name_p): Simplify and use
	walk_tree_without_duplicates.

2019-06-04  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/90738
	Revert
	2019-06-03  Richard Biener  <rguenther@suse.de>

	* tree-ssa-sccvn.c (ao_ref_init_from_vn_reference): Get original
	full reference tree and record in ref->ref.
	(vn_reference_lookup_3): Pass in original ref to
	ao_ref_init_from_vn_reference.
	(vn_reference_lookup): Likewise.
	* tree-ssa-sccvn.h (ao_ref_init_from_vn_reference): Adjust prototype.
	* tree-ssa-alias.c (nonoverlapping_component_refs_of_decl_p):
	Handle non-decl bases in the original reference.

2019-06-04  Martin Liska  <mliska@suse.cz>

	* ipa-icf.c (sem_item_optimizer::add_item_to_class): Count
	number of references.
	(sem_item_optimizer::do_congruence_step):
	(sem_item_optimizer::worklist_push): Dump how references
	a class has.
	(sem_item_optimizer::worklist_pop): Use heap.
	(sem_item_optimizer::process_cong_reduction): Likewise.
	* ipa-icf.h: Use fibonacci_heap insteam of std::list.

2019-06-04  Martin Liska  <mliska@suse.cz>

	* ipa-icf.h (struct sem_usage_pair_hash): New.
	(sem_usage_pair_hash::hash): Likewise.
	(sem_usage_pair_hash::equal): Likewise.
	(struct sem_usage_hash): Likewise.
	* ipa-icf.c (sem_item::sem_item): Initialize
	referenced_by_count.
	(sem_item::add_reference): Register a reference
	in ref_map and not in target->usages.
	(sem_item::setup): Remove initialization of
	dead vectors.
	(sem_item::~sem_item): Remove usage of dead vectors.
	(sem_item::dump): Remove dump of references.
	(sem_item_optimizer::sem_item_optimizer): Initialize
	m_references.
	(sem_item_optimizer::read_section): Remove useless
	dump.
	(sem_item_optimizer::parse_funcs_and_vars): Likewise here.
	(sem_item_optimizer::build_graph): Pass m_references
	to ::add_reference.
	(sem_item_optimizer::verify_classes): Remove usage of dead
	vectors.
	(sem_item_optimizer::traverse_congruence_split): Return true
	when a class is split.
	(sem_item_optimizer::do_congruence_step_for_index): Use
	hash_map for look up of (sem_item *, index). That brings
	significant speed up.
	(sem_item_optimizer::do_congruence_step): Return true
	when a split is done.
	(congruence_class::is_class_used): Use referenced_by_count.

2019-06-04  Alan Modra  <amodra@gmail.com>

	PR target/90689
	* config/rs6000/rs6000.c (rs6000_call_aix): Correct r271753 merge
	error.

2019-06-03  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.h (MASK_MFPGPR): Delete.
	* config/rs6000/rs6000.c (direct_move_p): Adjust.
	(rs6000_secondary_reload_simple_move): Adjust.
	(rs6000_opt_masks): Neuter the "mfpgpr" option.
	* config/rs6000/rs6000-c.c (rs6000_target_modify_macros): Adjust.
	* config/rs6000/rs6000-cpus.def (ISA_2_5_MASKS_EMBEDDED): Adjust
	comment.
	(power6x): Adjust.
	* config/rs6000/rs6000.md (floatsi<mode>2_lfiwax): Adjust.
	(floatunssi<mode>2_lfiwzx): Adjust.
	(fix_trunc<mode>si2_stfiwx): Adjust.
	(fixuns_trunc<mode>si2_stfiwx): Adjust.
	* config/rs6000/rs6000.opt (mno-mfpgpr): New.
	(mfpgpr): Mark as deprecated.
	* doc/extend.texi (PowerPC Function Attributes): Delete mfpgpr.
	(Basic PowerPC Built-in Functions Available on ISA 2.05): Adjust.
	* doc/invoke.texi (RS/6000 and PowerPC Options): Delete -mmfpgpr.

2019-06-03  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/constraints.md (define_register_constraint "wg"):
	Delete.
	* config/rs6000/rs6000.h (enum r6000_reg_class_enum): Delete
	RS6000_CONSTRAINT_wg.
	* config/rs6000/rs6000.c (rs6000_debug_reg_global): Adjust.
	(rs6000_init_hard_regno_mode_ok): Adjust.
	* config/rs6000/rs6000.md (*mov<mode>_softfloat32, *movdi_internal64):
	Delete "wg" alternatives.
	* doc/md.texi (Machine Constraints): Adjust.

2019-06-03  Alan Modra  <amodra@gmail.com>

	* bb-reorder.c (copy_bb_p): Don't overflow size calculation.
	(get_uncond_jump_length): Assert length less than INT_MAX and
	non-negative.

2019-06-03  Wilco Dijkstra  <wdijkstr@arm.com>

	PR middle-end/64242
	* builtins.c (expand_builtin_longjmp): Add frame clobbers and schedule
	block.
	(expand_builtin_nonlocal_goto): Likewise.

2019-06-03  Szabolcs Nagy  <szabolcs.nagy@arm.com>

	* config/aarch64/aarch64-protos.h (aarch64_asm_output_alias): Declare.
	(aarch64_asm_output_external): Declare.
	* config/aarch64/aarch64.c (aarch64_asm_output_variant_pcs): New.
	(aarch64_declare_function_name): Call aarch64_asm_output_variant_pcs.
	(aarch64_asm_output_alias): New.
	(aarch64_asm_output_external): New.
	* config/aarch64/aarch64.h (ASM_OUTPUT_DEF_FROM_DECLS): Define.
	(ASM_OUTPUT_EXTERNAL): Define.

2019-06-03  Aldy Hernandez  <aldyh@redhat.com>
	* tree-vrp.h (value_range_base::nonzero_p): New.
	(value_range_base::set_nonnull): Rename to...
	(value_range_base::set_nonzero): ...this.
	(value_range_base::set_null): Rename to...
	(value_range_base::set_zero): ...this.
	(value_range::set_nonnull): Remove.
	(value_range::set_null): Remove.
	* tree-vrp.c (range_is_null): Remove.
	(range_is_nonnull): Remove.
	(extract_range_from_binary_expr): Use value_range_base::*zero_p
	instead of range_is_*null.
	(extract_range_from_unary_expr): Same.
	(value_range_base::set_nonnull): Rename to...
	(value_range_base::set_nonzero): ...this.
	(value_range::set_nonnull): Remove.
	(value_range_base::set_null): Rename to...
	(value_range_base::set_zero): ...this.
	(value_range::set_null): Remove.
	(extract_range_from_binary_expr): Rename set_*null uses to
	set_*zero.
	(extract_range_from_unary_expr): Same.
	(union_helper): Same.
	* vr-values.c (get_value_range): Use set_*zero instead of
	set_*null.
	(vr_values::extract_range_from_binary_expr): Same.
	(vr_values::extract_range_basic): Same.

2019-06-03  Wilco Dijkstra  <wdijkstr@arm.com>

	PR driver/90684
	* opts.c (parse_and_check_align_values): Allow 4 alignment values.

2019-06-03  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/aarch64/iterators.md (MAX_OPP): New code attr.
	* config/aarch64/aarch64-simd.md (*aarch64_<su>abd<mode>_3):
	Rename to...
	(aarch64_<su>abd<mode>_3): ... This.
	(<sur>sadv16qi): Add TARGET_DOTPROD expansion.

2019-06-03  Richard Biener  <rguenther@suse.de>

	* tree-ssa-sccvn.c (ao_ref_init_from_vn_reference): Get original
	full reference tree and record in ref->ref.
	(vn_reference_lookup_3): Pass in original ref to
	ao_ref_init_from_vn_reference.
	(vn_reference_lookup): Likewise.
	* tree-ssa-sccvn.h (ao_ref_init_from_vn_reference): Adjust prototype.
	* tree-ssa-alias.c (nonoverlapping_component_refs_of_decl_p):
	Handle non-decl bases in the original reference.

2019-06-03  Martin Liska  <mliska@suse.cz>

	* doc/generic.texi: Remove Java Trees.

2019-06-03  Martin Liska  <mliska@suse.cz>

	* fold-const.c (operand_equal_p): Fix typo as compare_tree_int
	returns 0 when operands are equal.

2019-06-03  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/90716
	* tree-loop-distribution.c (destroy_loop): Process blocks in
	correct order.

2019-06-03  Prathamesh Kulkarni  <prathamesh.kulkarni@linaro.org>

	PR target/88837
	* vector-builder.h (vector_builder::count_dups): New method.
	* config/aarch64/aarch64-protos.h (aarch64_expand_sve_vector_init):
	Declare prototype.
	* config/aarch64/aarch64/sve.md (aarch64_sve_rev64<mode>): Use @.
	(vec_init<mode><Vel>): New pattern.
	* config/aarch64/aarch64.c (emit_insr): New function.
	(aarch64_sve_expand_vector_init_handle_trailing_constants): Likewise.
	(aarch64_sve_expand_vector_init_insert_elems): Likewise.
	(aarch64_sve_expand_vector_init_handle_trailing_same_elem): Likewise.
	(aarch64_sve_expand_vector_init): Define two overloaded functions.

2019-06-03  Alejandro Martinez  <alejandro.martinezvicente@arm.com>

	PR tree-optimization/90681
	* internal-fn.c (mask_load_direct): Mark as non-vectorizable again.
	* tree-vect-slp.c (vect_build_slp_tree_1): Add masked loads as a
	special case for SLP, but fail on non-groupped loads.

2019-06-03  Martin Liska  <mliska@suse.cz>

	* cfg.c (debug): Use TDF_DETAILS for debug and
	print edge info only once.

2019-06-02  Thomas Koenig  <tkoenig@gcc.gnu.org>

	PR fortran/90539
	* predict.def (PRED_FORTRAN_CONTIGUOUS): New predictor.

2019-06-01  Martin Sebor  <msebor@redhat.com>

	PR middle-end/90694
	* tree-pretty-print.c (dump_generic_node): Add parentheses.

2019-05-31  Jan Hubicka  <jh@suse.cz>

	* alias.c: Include ipa-utils.h.
	(get_alias_set): Try to complete ODR type via ODR type hash lookup.
	* ipa-devirt.c (prevailing_odr_type): New.
	* ipa-utils.h (previaling_odr_type): Declare.

2019-05-31  H.J. Lu  <hongjiu.lu@intel.com>
	    Hongtao Liu  <hongtao.liu@intel.com>

	PR target/89355
	* config/i386/i386-features.c (rest_of_insert_endbranch): Remove
	NOTE_INSN_DELETED_LABEL check.

2019-05-31  Prachi Godbole  <prachi.godbole@imgtec.com>
	    Robert Suchanek  <robert.suchanek@mips.com>

	* config/mips/mips.c (mips_expand_builtin_insn): Swap the 1st
	and 3rd operands of the fmadd/fmsub/maddv builtin.

2019-05-31  Jakub Jelinek  <jakub@redhat.com>

	* tree.h (OMP_CLAUSE__CONDTEMP__ITER): Define.
	* gimplify.c (gimplify_scan_omp_clauses): Allow lastprivate conditional
	on OMP_SIMD if not nested inside of worksharing loop that also has
	lastprivate conditional clause for the same decl.
	(gimplify_omp_for): Add _condtemp_ clauses to OMP_SIMD if needed.
	* omp-low.c (scan_sharing_clauses): Handle OMP_CLAUSE__CONDTEMP_ also
	on simd.
	(lower_rec_input_clauses): Likewise.  Handle lastprivate conditional
	on simd construct.
	(lower_lastprivate_conditional_clauses): Handle lastprivate conditional
	on simd construct.
	(lower_lastprivate_clauses): Likewise.
	(lower_omp_sections): Call lower_lastprivate_conditional_clauses before
	calling lower_rec_input_clauses.
	(lower_omp_for): Likewise.
	(lower_omp_1): Use first rather than second OMP_CLAUSE__CONDTEMP_
	clause on simd construct.
	* omp-expand.c (expand_omp_simd): Initialize cond_var if
	OMP_CLAUSE__CONDTEMP_ clause is present.

	* omp-low.c (lower_rec_simd_input_clauses): Set TREE_THIS_NOTRAP on
	ivar and lvar.

2019-05-31  Xiong Hu Luo  <luoxhu@linux.ibm.com>

	PR c/43673
	* c-format.c (print_char_table, scanf_char_table): Replace BADLEN with
	TEX_D32, TEX_D64 or TEX_D128.

2019-05-31  Marc Glisse  <marc.glisse@inria.fr>

	* match.pd (~(vec?cst1:cst2)): New transformation.

2019-05-31  Marc Glisse  <marc.glisse@inria.fr>

	* match.pd (X/[ex]D<Y/[ex]D): Handle negative denominator.
	((size_t)(A /[ex] B) CMP C): New transformation.

2019-05-31  Richard Sandiford  <richard.sandiford@arm.com>

	* doc/md.texi: Document define_insn_and_rewrite.
	* rtl.def (DEFINE_INSN_AND_REWRITE): New rtx code.
	* gensupport.c (queue_elem): Update comment.
	(replace_operands_with_dups): New function.
	(gen_rewrite_sequence): Likewise.
	(process_rtx): Handle DEFINE_INSN_AND_REWRITE.
	* read-rtl.c (apply_subst_iterator): Likewise.
	(add_condition_to_rtx, named_rtx_p): Likewise.
	(rtx_reader::read_rtx_operand): Likewise.
	* config/aarch64/aarch64-sve.md
	(while_ult<GPI:mode><PRED_ALL:mode>_cc): Rename to...
	(*while_ult<GPI:mode><PRED_ALL:mode>_cc): ...this and use
	define_insn_and_rewrite.
	(*cond_<optab><mode>_any): Turn into define_insn_and_rewrites.
	Remove separate define_split.

2019-05-31  Jan Hubicka  <jh@suse.cz>

	* tree-ssa-alias.c (type_has_components_p): New function.
	(aliasing_component_refs_p): Use it.

2019-05-31  Martin Liska  <mliska@suse.cz>

	* gdbhooks.py: Add const_tree to TreePrinter.

2019-05-31  Thomas De Schampheleire  <thomas.de_schampheleire@nokia.com>

	PR debug/86964
	* common.opt (feliminate-unused-debug-symbols): Enable by default.
	* doc/invoke.texi (Debugging Options): Document new default of
	-feliminate-unused-debug-symbols and remove restriction to 'stabs'.

2019-05-31  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/90671
	* tree-ssa-threadupdate.c (ssa_create_duplicates): If
	template_block used to be empty on the first call, don't use
	gsi_split_seq_after and gsi_insert_seq_after, but remember whole
	seq with bb_seq and set it with set_bb_seq.

2019-05-31  Iain Sandoe  <iain@sandoe.co.uk>

	* config/i386/darwin.h (ASM_OUTPUT_MAX_SKIP_ALIGN): New.

2019-05-30  Bill Schmidt  <wschmidt@linux.ibm.com>
	    Michael Meissner  <meissner@linux.ibm.com>

	* config/rs6000/predicates.md (pcrel_address): New define_predicate.
	(prefixed_mem_operand): Likewise.
	(non_prefixed_mem_operand): Likewise.
	* config/rs6000/rs6000-protos.h (rs6000_prefixed_address): New
	prototype.
	* config/rs6000/rs6000.c (print_operand_address): Handle
	PC-relative addresses.
	(mode_supports_prefixed_address_p): New function.
	(rs6000_prefixed_address): New function.
	* config/rs6000/rs6000.h (SYMBOL_FLAG_PCREL): New #define.
	(SYMBOL_REF_PCREL_P): Likewise.

2019-05-30  Jakub Jelinek  <jakub@redhat.com>

	* gimplify.c (enum gimplify_omp_var_data): Add GOVD_CONDTEMP.
	(gimplify_adjust_omp_clauses_1): Handle GOVD_CONDTEMP.
	(gimplify_omp_for): If worksharing loop with lastprivate conditional
	is nested inside of parallel region, add _condtemp_ clause to both.
	* tree-nested.c (convert_nonlocal_omp_clauses,
	convert_local_omp_clauses): Ignore OMP_CLAUSE__CONDTEMP_ instead of
	assertion failure.
	* omp-general.h (struct omp_for_data): Add have_pointer_condtemp
	member.
	* omp-general.c (omp_extract_for_data): Compute it.
	* omp-low.c (scan_sharing_clauses): Handle OMP_CLAUSE__CONDTEMP_.
	(lower_rec_input_clauses): Likewise.
	(lower_lastprivate_conditional_clauses): If OMP_CLAUSE__CONDTEMP_
	clause is already present, just add one further one after it.
	(lower_lastprivate_clauses): Handle cond_ptr with array type.
	(lower_send_shared_vars): Clear _condtemp_ vars.
	(lower_omp_1) <case GIMPLE_ASSIGN>: Handle target data like critical
	or section or taskgroup.
	* omp-expand.c (determine_parallel_type): Disallow combining only if
	first OMP_CLAUSE__CONDTEMP_ has pointer type.  Disallow combining
	of parallel sections if OMP_CLAUSE__CONDTEMP_ is present.
	(expand_omp_for_generic, expand_omp_for_static_nochunk,
	expand_omp_for_static_chunk, expand_omp_for): Use
	fd->have_pointer_condtemp instead of fd->lastprivate_conditional to
	determine if a special set of API routines are needed and if condtemp
	needs to be initialized, while always initialize cond_var if
	fd->lastprivate_conditional is non-zero.

2019-05-30  Bill Schmidt  <wschmidt@linux.ibm.com>
	    Michael Meissner  <meissner@linux.ibm.com>

	* config/rs6000/constraints.md (eI): New constraint.
	* config/rs6000/predicates.md (cint34_operand): New predicate.
	* config/rs6000/rs6000.h (SIGNED_16BIT_OFFSET_P): New #define.
	(SIGNED_34BIT_OFFSET_P): Likewise.
	* doc/md.texi (eI): Document constraint.

2019-05-30  Sylvia Taylor  <sylvia.taylor@arm.com>

	* config/aarch64/aarch64-sve.md (*fabd<mode>3): New.

2019-05-30  Bill Schmidt  <wschmidt@linux.ibm.com>
	    Michael Meissner  <meissner@linux.ibm.com>

	* rs6000-cpus.def (OTHER_FUSION_MASKS): New #define.
	(ISA_3_0_MASKS_SERVER): Mask off OTHER_FUSION_MASKS.
	(ISA_3_0_MASKS_IEEE): Remove OPTION_MASK_DIRECT_MOVE.
	(ISA_FUTURE_MASKS_SERVER): Add OPTION_MASK_PREFIXED_ADDR.
	(OTHER_FUTURE_MASKS): Likewise.
	(POWERPC_MASKS): Likewise.
	* rs6000.c (rs6000_option_override_internal): Error if -mpcrel is
	specified without -mprefixed-addr or -mcpu=future.  Error if
	-mprefixed-addr is specified without -mcpu=future.
	(rs6000_opt_masks): Add entry for prefixed-addr.
	* rs6000.opt (mprefixed-addr): New option.

2019-05-30  Sam Tebbs  <sam.tebbs@arm.com>

	* aarch64/aarch64.c (aarch64_post_cfi_startproc): Add
	cfun->is_thunk check.

2019-05-30  Jakub Jelinek  <jakub@redhat.com>

	* tree-predcom.c (is_inv_store_elimination_chain): Fix a typo - lenght
	to length.

2019-05-30  Martin Liska  <mliska@suse.cz>

	* gdbinit.in: Fix 'ptc' command.  Add trt
	that prints TREE_TYPE($).

2019-05-29  Bill Schmidt  <wschmidt@linux.ibm.com>
	    Alan Modra  <amodra@gmail.com>

	* config/rs6000/rs6000.c (rs6000_call_template_1): Handle pcrel
	calls here...
	(rs6000_indirect_call_template_1): ...and here.
	(rs6000_pltseq_template): Handle plt_pcrel34.  Rework tocsave,
	plt16_ha, plt16_lo, mtctr indirect calls.  Use
	rs6000_pltseq_enum.
	(rs6000_decl_ok_for_sibcall): New function.
	(rs6000_function_ok_for_sibcall): Refactor.
	(rs6000_longcall_ref): Use UNSPEC_PLT_PCREL when pcrel.
	(rs6000_call_aix): Don't emit toc restore rtl for indirect calls
	when pcrel.  Reorganize.
	(rs6000_sibcall_aix): Don't add r2 to function usage when pcrel.
	* rs6000.h (rs6000_pltseq_enum): New enum.
	* rs6000.md (UNSPEC_PLT_PCREL): New unspec.
	(*pltseq_tocsave): Use rs6000_pltseq_enum.
	(*pltseq_plt16_ha): Likewise.
	(*pltseq_plt16_lo): Likewise.
	(*pltseq_mtctr): Likewise.
	(*pltseq_plt_pcrel): New insn.
	(*call_local_aix): Handle @notoc calls.
	(*call_value_local_aix): Likewise.
	(*call_nonlocal_aix): Adjust lengths for pcrel calls.
	(*call_value_nonlocal_aix): Likewise.
	(*call_indirect_pcrel): New insn.
	(*call_value_indirect_pcrel): Likewise.

2019-05-29  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/sse.md (*save_multiple<mode>): Rename from
	save_multiple<mode>.
	(*restore_multiple<mode>): Rename from restore_multiple<mode>.
	(*restore_multiple_and_return<mode>): Rename from
	restore_multiple_and_return<mode>.
	(*restore_multiple_leave_return<mode>): Rename from
	restore_multiple_leave_return<mode>.

2019-05-29  Yoshinori Sato  <ysato@users.sourceforge.jp>

	* config.gcc (rx-*-linux*): New target.
	* config/rx/elf.opt: New file.
	* config/rx/linux.h: Likewise.
	* config/rx/t-linux: Likewise.
	* config/rx/rx.c (TARGET_SAVE_ACC_REGISTER): If not defined,
	make it zero.
	* config/rx/rx.h (ASM_APP_ON): Allow to be overridden.
	(ASM_APP_OFF): Likewise.
	* config/rx/rx.opt: Drop -msim and -mas100-syntax, they were
	moved elsewhere.

2019-05-29  Jan Hubicka  <jh@suse.cz>

	* tree-ssa-alias.c (same_type_for_tbaa): Return ture if main
	variants are pointer equivalent.

2019-05-29  Alejandro Martinez  <alejandro.martinezvicente@arm.com>

	* config/aarch64/aarch64-c.c: Added TARGET_SVE2.
	* config/aarch64/aarch64-sve2.md: New file.
	(<u>avg<mode>3_floor): New pattern.
	(<u>avg<mode>3_ceil): Likewise.
	(*<sur>h<addsub><mode>): Likewise.
	* config/aarch64/aarch64.h: Added AARCH64_ISA_SVE2 and TARGET_SVE2.
	* config/aarch64/aarch64.md: Include aarch64-sve2.md.

2019-05-29  Jakub Jelinek  <jakub@redhat.com>

	PR bootstrap/90543
	* optc-save-gen.awk: In cl_optimization_print, use correct condition
	for var_opt_string printing.  In cl_optimization_print_diff, print
	(null) instead of invoking undefined behavior if one of the
	var_opt_string pointers is NULL and use && instead of first || in the
	guarding condition.  For var_target_other options, handle const char *
	target variables similarly to const char * optimize node variables.

2019-05-29  Sam Tebbs  <sam.tebbs@arm.com>

	* config/aarch64/aarch64-builtins.c (aarch64_builtins): Add
	AARCH64_PAUTH_BUILTIN_AUTIB1716 and AARCH64_PAUTH_BUILTIN_PACIB1716.
	* config/aarch64/aarch64-builtins.c (aarch64_init_pauth_hint_builtins):
	Add autib1716 and pacib1716 initialisation.
	* config/aarch64/aarch64-builtins.c (aarch64_expand_builtin): Add checks
	for autib1716 and pacib1716.
	* config/aarch64/aarch64-protos.h (aarch64_key_type,
	aarch64_post_cfi_startproc): Define.
	* config/aarch64/aarch64-protos.h (aarch64_ra_sign_key): Define extern.
	* config/aarch64/aarch64.c (aarch64_handle_standard_branch_protection,
	aarch64_handle_pac_ret_protection): Set default sign key to A.
	* config/aarch64/aarch64.c (aarch64_expand_epilogue,
	aarch64_expand_prologue): Add check for b-key.
	* config/aarch64/aarch64.c (aarch64_ra_sign_key,
	aarch64_post_cfi_startproc, aarch64_handle_pac_ret_b_key): Define.
	* config/aarch64/aarch64.h (TARGET_ASM_POST_CFI_STARTPROC): Define.
	* config/aarch64/aarch64.c (aarch64_pac_ret_subtypes): Add "b-key".
	* config/aarch64/aarch64.md (unspec): Add UNSPEC_AUTIA1716,
	UNSPEC_AUTIB1716, UNSPEC_AUTIASP, UNSPEC_AUTIBSP, UNSPEC_PACIA1716,
	UNSPEC_PACIB1716, UNSPEC_PACIASP, UNSPEC_PACIBSP.
	* config/aarch64/aarch64.md (do_return): Add check for b-key.
	* config/aarch64/aarch64.md (<pauth_mnem_prefix>sp): Replace
	pauth_hint_num_a with pauth_hint_num.
	* config/aarch64/aarch64.md (<pauth_mnem_prefix>1716): Replace
	pauth_hint_num_a with pauth_hint_num.
	* config/aarch64/aarch64.opt (msign-return-address=): Deprecate.
	* config/aarch64/iterators.md (PAUTH_LR_SP): Add UNSPEC_AUTIASP,
	UNSPEC_AUTIBSP, UNSPEC_PACIASP, UNSPEC_PACIBSP.
	* config/aarch64/iterators.md (PAUTH_17_16): Add UNSPEC_AUTIA1716,
	UNSPEC_AUTIB1716, UNSPEC_PACIA1716, UNSPEC_PACIB1716.
	* config/aarch64/iterators.md (pauth_mnem_prefix): Add UNSPEC_AUTIA1716,
	UNSPEC_AUTIB1716, UNSPEC_PACIA1716, UNSPEC_PACIB1716, UNSPEC_AUTIASP,
	UNSPEC_AUTIBSP, UNSPEC_PACIASP, UNSPEC_PACIBSP.
	* config/aarch64/iterators.md (pauth_hint_num_a): Replace
	UNSPEC_PACI1716 and UNSPEC_AUTI1716 with UNSPEC_PACIA1716 and
	UNSPEC_AUTIA1716 respectively.
	* config/aarch64/iterators.md (pauth_hint_num_a): Rename to
	pauth_hint_num and add UNSPEC_PACIBSP, UNSPEC_AUTIBSP,
	UNSPEC_PACIB1716, UNSPEC_AUTIB1716.
	* doc/invoke.texi (-mbranch-protection): Add b-key type.
	* config/aarch64/aarch64-bti-insert.c (aarch64_pac_insn_p): Rename
	UNSPEC_PACISP to UNSPEC_PACIASP and UNSPEC_PACIBSP.

2019-05-29  Jakub Jelinek  <jakub@redhat.com>

	* gimplify.c (struct gimplify_omp_ctx): Add clauses member.
	(gimplify_scan_omp_clauses): Initialize ctx->clauses.
	(gimplify_adjust_omp_clauses_1): Transform lastprivate conditional
	explicit clause on combined parallel into implicit shared clause.
	(gimplify_adjust_omp_clauses): Move lastprivate conditional clause
	and firstprivate if the decl has one too from combined parallel to
	the worksharing construct.

2019-05-28  Bill Schmidt  <wschmidt@linux.ibm.com>
	    Michael Meissner  <meissner@linux.ibm.com>

	* config/rs6000/rs6000-cpus.def (OTHER_FUTURES_MASK): New #define.

2019-05-28  Michael Meissner  <meissner@linux.ibm.com>

	* rtl.h (LABEL_REF_P): New #define.

2019-05-28  John David Anglin  <danglin@gcc.gnu.org>

	* config/pa/pa.c (hppa_profile_hook): Remove offset adjustment.

2019-05-28  Alejandro Martinez  <alejandro.martinezvicente@arm.com>

	* internal-fn.c: Marked mask_load_direct as vectorizable.
	* tree-data-ref.c (data_ref_compare_tree): Fixed comment typo.
	* tree-vect-data-refs.c (can_group_stmts_p): Allow masked loads to be
	combined even if masks different with allow_slp_p param.
	(vect_analyze_data_ref_accesses): Mark SLP only vectorizable groups.
	* tree-vect-loop.c (vect_dissolve_slp_only_groups): New function to
	dissolve SLP-only vectorizable groups when SLP has been discarded.
	(vect_analyze_loop_2): Call vect_dissolve_slp_only_groups when needed.
	* tree-vect-slp.c (vect_get_and_check_slp_defs): Check masked loads
	masks.
	(vect_build_slp_tree_1): Fixed comment typo.
	(vect_build_slp_tree_2): Include masks from masked loads in SLP tree.
	* tree-vect-stmts.c (vectorizable_load): Allow vectorizaion of masked
	loads for SLP only.
	* tree-vectorizer.h (_stmt_vec_info): Added flag for SLP-only
	vectorizable.
	* tree-vectorizer.c (vec_info::new_stmt_vec_info): Likewise.

2019-05-28  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

	* config/alpha/alpha.c [TARGET_ABI_OSF] (alpha_output_mi_thunk_osf):
	Remove obsolete use_thunk reference.
	* config/i386/i386.c (x86_output_mi_thunk): Likewise.
	* config/ia64/ia64.c (ia64_output_mi_thunk): Likewise.
	* config/nios2/nios2.c (nios2_asm_output_mi_thunk): Likewise.
	* config/or1k/or1k.c (or1k_output_mi_thunk): Likewise.
	* config/rs6000/rs6000.c (rs6000_output_mi_thunk): Likewise.
	* config/sh/sh.c (sh_output_mi_thunk): Likewise.
	* config/sparc/sparc.c (sparc_output_mi_thunk): Likewise.
	* config/tilegx/tilegx.c (tilegx_output_mi_thunk): Likewise.
	* config/tilepro/tilepro.c (tilepro_asm_output_mi_thunk): Likewise.

2019-05-28  Nathan Sidwell  <nathan@acm.org>

	* tree.h (IDENTIFIER_ANON_P): New.
	(anon_aggrname_format, anon_aggname_p): Don't declare.
	(make_anon_name): Declare.
	* lto-streamer-out.c (DFS::DFS_write_tree_body): Use IDENTIFIER_ANON_P.
	(hash_tree): Likewise.
	* tree-streamer-out.c (write_ts_decl_minimal_tree): Likewise.
	* tree.c (anon_aggrname_p, anon_aggrname_format): Delete.
	(anon_cnt, make_anon_name): New.

2019-05-28  Martin Liska  <mliska@suse.cz>

	PR other/90315
	* opts-global.c (decode_options): Print help for all
	help_option_arguments.
	* opts.c (print_help): Add new argument.
	(common_handle_option): Remember all values into
	help_option_arguments.
	* opts.h (print_help): Add new argument.

2019-05-28  Martin Liska  <mliska@suse.cz>

	PR ipa/90555
	* ipa-icf-gimple.c (func_checker::compare_loops): New function.
	* ipa-icf-gimple.h (func_checker::compare_loops): Likewise.
	(func_checker::compare_bb): Call compare_loops.

2019-05-27  Jakub Jelinek  <jakub@redhat.com>

	* gimplify.c (gimplify_scan_omp_clauses): Allow lastprivate conditional
	on sections construct.
	* omp-low.c (lower_lastprivate_conditional_clauses): Handle sections
	construct.
	(lower_omp_sections): Handle lastprivate conditional.
	(lower_omp_1) <case GIMPLE_ASSIGN>: Handle sections construct with
	lastprivate_conditional_map.
	* omp-expand.c (expand_omp_sections): Handle lastprivate conditional.

	* omp-low.c (lower_omp_1) <case GIMPLE_ASSIGN>: Look through ordered,
	critical, taskgroup and section regions when looking for a region
	with non-NULL lastprivate_conditional_map.

2019-05-27  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.c (ix86_gen_add3): Remove indirect function.
	(*ix86_gen_sub3): Ditto.
	(*ix86_gen_sub3_carry): Ditto.
	(*ix86_gen_one_cmpl2): Ditto.
	(*ix86_gen_andsp): Ditto.
	(ix86_init_large_pic_reg): Use gen_add2_insn instead of ix86_gen_add3.
	(gen_and2_insn): New static function.
	(ix86_expand_prologue): Use gen_and2_insn instead of ix86_gen_andsp.
	Use gen_add3_insn instead of ix86_gen_add3.
	(ix86_expand_split_stack_prologue): Use gen_add2_insn
	instead of ix86_gen_add3.
	(legitimize_tls_address): Use gen_add2_insn instead of ix86_gen_add3.
	Use gen_sub3_insn instead of ix86_gen_sub3.
	* config/i386-expand.c (ix86_split_long_move): Use gen_add2_insn
	instead of ix86_gen_add3.
	(ix86_expand_strlensi_unroll_1): Use gen_add2_insn instead of
	ix86_gen_add3.  Use gen_sub3_insn instead of ix86_gen_sub3.
	(construct_plt_address): Use gen_add2_insn instead of ix86_gen_add3.
	* config/i386/i386-options.c (ix86_option_override_internal):
	Do not initialize ix86_gen_add3, ix86_gen_sub3, ix86_gen_sub3_carry,
	ix86_gen_one_cmpl2 and ix86_gen_andsp.

2019-05-27  Eric Botcazou  <ebotcazou@adacore.com>

	* dwarf2out.c (resolve_args_picking_1): Deal with DW_OP_GNU_addr_index
	and DW_OP_GNU_const_index opcodes.

2019-05-27  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.h (STACK_SIZE_MODE): Define.

2019-05-27  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/90637
	* tree-ssa-sink.c (statement_sink_location): Honor the
	computed sink location for single-uses.

2019-05-27  Richard Biener  <rguenther@suse.de>

	PR middle-end/90610
	* match.pd (vec_perm): Avoid clobbering op0 when not generating
	a bit-insert.

2019-05-26  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (@sub<mode>3_carry): Rename
	from sub<mode>3_carry.
	(@leave_<mode>): New expander.
	(*leave): Rename from leave.
	(*leave_rex64): Rename from leave_rex64.
	(@monitorx_<mode>): Rename from monitorx_<mode>.
	(@clzero_<mode>): Rename from clzero_<mode>.
	* config/i386/sse.md (@sse3_monitor_<mode>): Rename
	from sse3_monitor_<mode>.
	* config/i386/i386.c (ix86_gen_sub3_carry): Remove indirect function.
	(*ix86_gen_leave): Ditto.
	(*ix86_gen_monitor): Ditto.
	(*ix86_gen_monitorx): Ditto.
	(*ix86_gen_clzero): Ditto.
	(ix86_emit_leave): Use gen_leave instead of ix86_gen_leave.
	* config/i386/i386-expand.c (ix86_expand_strlensi_unroll_1):
	Use gen_sub3_carry instead of ix86_gen_sub3_carry.
	(ix86_expand_builtin) <case IX86_BUILTIN_MONITOR>:
	Use gen_sse3_monitor instead of ix86_gen_monitor.
	<case IX86_BUILTIN_MONITORX>: Use gen_monitorx
	instead of ix86_gen_monitorx.
	<case IX86_BUILTIN_CLZERO>: Use gen_clzero
	instead of ix86_gen_clzero.
	* config/i386/i386-options.c (ix86_option_override_internal):
	Do not initialize ix86_gen_leave, ix86_gen_sub3_carry,
	ix86_gen_monitor, ix86_gen_monitorx and ix86_gen_clzero.

2019-05-26  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (@tls_global_dynamic_64_<mode>):
	Rename from tls_global_dynamic_64_<mode>.
	(@tls_local_dynamic_base_64_<mode>): Rename from
	tls_local_dynamic_base_64_<mode>.
	* config/i386/i386.c (*ix86_gen_tls_global_dynamic_64):
	Remove indirect function.
	(*ix86_gen_tls_local_dynamic_base_64): Ditto.
	(legitimize_tls_address): Use gen_tls_global_dynamic_64 function
	instead of ix86_gen_tls_global_dynamic_64.
	Use gen_tls_local_dynamic_base_64 instead of
	ix86_gen_tls_local_dynamic_base_64.
	* config/i386/i386-options.c (ix86_option_override_internal):
	Do not initialize ix86_gen_tls_global_dynamic_64 and
	ix86_gen_tls_local_dynamic_base_64.

2019-05-26  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (@pro_epilogue_adjust_stack_add_<mode>)
	Rename from pro_epilogue_adjust_stack_<mode>_add.
	(@pro_epilogue_adjust_stack_sub_<mode>)
	Rename from pro_epilogue_adjust_stack_<mode>_sub.
	(@allocate_stack_worker_probe_<mode>):
	Rename from allocate_stack_worker_probe_<mode>.
	(allocate_stack): Use gen_allocate_stack_worker_probe.
	(probe_stack): Use gen_probe_stack_1.
	(@probe_stack_1_<mode>): Rename from probe_stack_<mode>.
	(@adjust_stack_and_probe_<mode>): Rename from
	adjust_stack_and_probe<mode>.
	(@probe_stack_range_<mode>): Rename from probe_stack_range<mode>.
	(stack_protect_set): Use gen_stack_protect_set_1.
	(@stack_protect_set_1_<mode>): Rename from stack_protect_set_<mode>.
	(stack_protect_test): Use gen_stack_protect_test_1.
	(@stack_protect_test_1_<mode>): Rename from stack_protect_test_<mode>.
	* config/i386/i386.c (*ix86_gen_allocate_stack_worker):
	Remove indirect function.
	(*ix86_gen_adjust_stack_and_probe): Ditto.
	(*ix86_gen_probe_stack_range): Ditto.
	(pro_epilogue_adjust_stack): Use gen_pro_epilogue_adjust_stack_add
	instead of gen_pro_epilogue_adjust_stack_{si,di}_add.
	(ix86_adjust_stack_and_probe_stack_clash): Use
	gen_adjust_stack_and_probe instead of ix86_gen_adjust_stack_and_probe.
	(ix86_adjust_stack_and_probe): Ditto.
	(ix86_emit_probe_stack_range): Use gen_probe_stack_range instead
	of ix86_gen_probe_stack_range.
	(ix86_expand_prologue): Use gen_pro_epilogue_adjust_stack_sub
	instead of gen_pro_epilogue_adjust_stack_{si,di}_sub.
	* config/i386/x86-tune-sched.c (ix86_macro_fusion_pair_p):
	Include insn-opinit.h.  Use code_for_stack_protect_test_1 instead of
	CODE_FOR_stack_protect_test_{si,di}.
	* config/i386/i386-options.c (ix86_option_override_internal):
	Do not initialize ix86_gen_allocate_stack_worker,
	ix86_gen_adjust_stack_and_probe and ix86_gen_probe_stack_range.

2019-05-26  Gerald Pfeifer  <gerald@pfeifer.com>

	* doc/invoke.texi (Link Options): Many editorial changes around
	-flinker-output.

2019-05-26  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

	* doc/invoke.texi (x86 Options, -mvect8-ret-in-mem): Remove
	pre-Solaris 11 referene and most Studio compiler details.

2019-05-24  John David Anglin  <danglin@gcc.gnu.org>

	PR target/90530
	* config/pa/pa.c (pa_can_change_mode_class): Accept mode changes from
	DImode to SImode in floating-point registers on 64-bit target.
	* config/pa/pa.md (umulsidi3): Change nonimmediate_operand to
	register_operand in xmpyu patterns.

2019-05-24  Jakub Jelinek  <jakub@redhat.com>

	* tree-core.h (enum omp_clause_code): Add OMP_CLAUSE__CONDTEMP_.
	* tree.h (OMP_CLAUSE_DECL): Use OMP_CLAUSE__CONDTEMP_ instead of
	OMP_CLAUSE__REDUCTEMP_.
	* tree.c (omp_clause_num_ops, omp_clause_code_name): Add
	OMP_CLAUSE__CONDTEMP_.
	(walk_tree_1): Handle OMP_CLAUSE__CONDTEMP_.
	* tree-pretty-print.c (dump_omp_clause): Likewise.
	* tree-nested.c (convert_nonlocal_omp_clauses,
	convert_local_omp_clauses): Likewise.
	* gimplify.c (enum gimplify_omp_var_data): Use hexadecimal constants
	instead of decimal.  Add GOVD_LASTPRIVATE_CONDITIONAL.
	(gimplify_scan_omp_clauses): Don't reject lastprivate conditional
	on OMP_FOR.
	(gimplify_omp_for): Warn and disable conditional modifier from
	lastprivate on loop iterators.
	* omp-general.h (struct omp_for_data): Add lastprivate_conditional
	member.
	* omp-general.c (omp_extract_for_data): Initialize it.
	* omp-low.c (struct omp_context): Add lastprivate_conditional_map
	member.
	(delete_omp_context): Delete it.
	(lower_lastprivate_conditional_clauses): New function.
	(lower_lastprivate_clauses): Add BODY_P and CSTMT_LIST arguments,
	handle lastprivate conditional clauses.
	(lower_reduction_clauses): Add CLIST argument, emit it into
	the critical section if any.
	(lower_omp_sections): Adjust lower_lastprivate_clauses and
	lower_reduction_clauses callers.
	(lower_omp_for_lastprivate): Add CLIST argument, pass it through
	to lower_lastprivate_clauses.
	(lower_omp_for): Call lower_lastprivate_conditional_clauses, adjust
	lower_omp_for_lastprivate and lower_reduction_clauses callers, emit
	clist into a critical section if not emitted there already by
	lower_reduction_clauses.
	(lower_omp_taskreg, lower_omp_teams): Adjust lower_reduction_clauses
	callers.
	(lower_omp_1): Handle GIMPLE_ASSIGNs storing into lastprivate
	conditional variables.
	* omp-expand.c (determine_parallel_type): Punt if OMP_CLAUSE__CONDTEMP_
	clause is present.
	(expand_omp_for_generic, expand_omp_for_static_nochunk,
	expand_omp_for_static_chunk): Handle lastprivate conditional.
	(expand_omp_for): Handle fd.lastprivate_conditional like
	fd.have_reductemp.

2019-05-24  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn-run.c (main): Set a non-zero return value if the
	kernel does not exit cleanly.
	* config/gcn/gcn.md (gcn_return): Insert s_waitcnt before s_dcache_wb.

2019-05-24  Jason Merrill  <jason@redhat.com>

	Revert:
	* gimplify.c (gimplify_cond_expr): Don't check TREE_ADDRESSABLE.

2019-05-24  Richard Biener  <rguenther@suse.de>

	PR testsuite/90607
	* tree-loop-distribution.c (struct partition): Add location
	member.
	(partition_alloc): Initialize all fields.
	(generate_memset_builtin): Use the location recorded in the
	partition for the generated call.
	(generate_memcpy_builtin): Likewise.
	(classify_partition): Record the location of a single store
	as location for the partition.

2019-05-24  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn.c (gcn_expand_prologue): Use gen_addsi3_scalar_carry
	for lo-part.

2019-05-24  Matthew Malcomson  <matthew.malcomson@arm.com>

	PR target/90588
	* common/config/aarch64/aarch64-common.c
	(aarch64_rewrite_selected_cpu): Change local temporary variable
	type from unsigned long to uint64_t.
	* config/aarch64/aarch64-protos.h (aarch64_parse_extension,
	aarch64_get_extension_string_for_isa_flags): Change declaration to
	match new definition by replacing unsigned long with uint64_t.

2019-05-24  Jakub Jelinek  <jakub@redhat.com>

	PR target/90568
	* config/i386/x86-tune-sched.c (ix86_macro_funsion_pair_p): Call
	gen_attr_type just once instead of 4-7 times.  Formatting fixes.
	Handle stack_protect_test_<mode> codegen similarly to corresponding
	sub instruction.

2019-05-23  Iain Sandoe  <iain@sandoe.co.uk>

	* config/i386/darwin.h: Reject -mfentry*.
	* doc/sourcebuild.texi: Document mfentry target support.

2019-05-23  Bill Schmidt  <wschmidt@linux.ibm.com>

	* config/rs6000/rs6000.c (rs6000_global_entry_point_needed_p):
	Rename to rs6000_global_entry_point_prologue_needed_p.  Return
	false for PC-relative functions.
	(rs6000_output_function_prologue): Change called function name to
	rs6000_global_entry_point_prologue_needed_p.  Emit ".localentry
	name,1" for PC-relative functions.
	(rs6000_elf_declare_function_name): Change called function name to
	rs6000_global_entry_point_prologue_needed_p.

2019-05-23  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/90552
	* config/i386/i386.c (gen_rtx_cost):
	Use ix86_tune_cost instead of ix86_cost.

2019-05-23  Bill Schmidt  <wschmidt@linux.ibm.com>
	    Michael Meissner  <meissner@linux.ibm.com>
	    Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000-cpus.def (ISA_FUTURE_MASKS_SERVER): Add
	OPTION_MASK_PCREL.
	(POWERPC_MASKS): Add OPTION_MASK_PCREL.
	* config/rs6000/rs6000-protos.h (rs6000_pcrel_p): New prototype.
	(rs6000_fndecl_pcrel_p): Likewise.
	* config/rs6000/rs6000.c (rs6000_option_override_internal): Report
	error if -mpcrel is requested without -mcpu=future.
	(rs6000_opt_masks): Add entry for pcrel.
	(rs6000_fndecl_pcrel_p): New function.
	(rs6000_pcrel_p): Likewise.
	* config/rs6000/rs6000.opt (mpcrel): New option.
	* doc/invoke.texi: Document -mpcrel and -mno-pcrel.

2019-05-23  Jan Hubicka  <jh@suse.cz>
	    Martin Liska  <mliska@suse.cz>

	PR tree-optimization/90576
	* tree-ssa-alias.c (compare_sizes): Remove dead calls to
	poly_int_tree_p.
	(aliasing_component_refs_p): Fix three way size compare conditional;
	give up earlier in case we can not decide on equivalence.

2019-05-23  Bill Schmidt  <wschmidt@linux.ibm.com>
	    Michael Meissner  <meissner@linux.ibm.com>
	    Segher Boessenkool  <segher@kernel.crashing.org>

	* config.gcc: Add future cpu.
	* config/rs6000/driver-rs6000.c (asm_names): Add future cpu.
	* config/rs6000/rs6000-cpus.def (ISA_FUTURE_MASKS_SERVER): New
	#define.
	(POWERPC_MASKS): Add OPTION_MASK_FUTURE.
	(RS6000_CPU): New instantiation for future cpu.
	* config/rs6000/rs6000-opts.h (enum processor_type): Add
	PROCESSOR_FUTURE.
	* config/rs6000/rs6000-string.c (expand_compare_loop): Treat
	PROCESSOR_FUTURE like PROCESSOR_POWER9 for now.
	* config/rs6000/rs6000-tables.opt: Regenerate.
	* config/rs6000/rs6000.c (rs6000_option_override_internal): Treat
	PROCESSOR_FUTURE similarly to PROCESSOR_POWER9 for now.
	(rs6000_machine_from_flags): Handle future cpu.
	(rs6000_reassociation_width): Treat PROCESSOR_FUTURE like
	PROCESSOR_POWER9 for now.
	(rs6000_adjust_cost): Likewise.
	(rs6000_issue_rate): Likewise.
	(rs6000_register_move_cost): Likewise.
	(rs6000_opt_masks): Add entry for future.
	* config/rs6000/rs6000.h (ASM_CPU_SPEC): Add future cpu.
	(MASK_FUTURE): New #define.
	* config/rs6000/rs6000.md (define_attr "cpu"): Add future cpu.
	* config/rs6000/rs6000.opt (mfuture): New target option.
	* doc/invoke.texi (mcpu): Add future cpu.

2019-05-23  Martin Liska  <mliska@suse.cz>

	PR c++/90587
	* tree-ssa-uninit.c (value_sat_pred_p): The result of &
	operation points to a temporary (pointed via tree_to_wide_ref)
	that is out of scope after the &.

2019-05-23  Jonathan Wakely  <jwakely@redhat.com>

	PR c++/90592
	* doc/extend.texi (Function Names): Add missing word.

2019-05-23  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/88440
	* opts.c (default_options_table): Enable -ftree-loop-distribute-patterns
	at -O[2s]+.
	* tree-loop-distribution.c (generate_memset_builtin): Fold the
	generated call.
	(generate_memcpy_builtin): Likewise.
	(distribute_loop): Pass in whether to only distribute patterns.
	(prepare_perfect_loop_nest): Also allow size optimization.
	(pass_loop_distribution::execute): When optimizing a loop
	nest for size allow pattern replacement.

2019-05-23  Jakub Jelinek  <jakub@redhat.com>

	PR target/90568
	* config/i386/i386.md (stack_protect_test_<mode>): Use sub instead
	of xor.

2019-05-23  Martin Liska  <mliska@suse.cz>

	PR sanitizer/90570
	* gimplify.c (gimplify_target_expr): Skip TREE_STATIC target
	expression similarly to gimplify_decl_expr.

2019-05-23  Prathamesh Kulkarni  <prathamesh.kulkarni@linaro.org>

	* cse.c (cse_dump_path): s/dump_file/f.

2019-05-22  David Malcolm  <dmalcolm@redhat.com>

	PR c++/90462
	* diagnostic-format-json.cc: Include "selftest.h".
	(json_from_expanded_location): Only add "file" key for non-NULL
	file strings.
	(json_from_location_range): Don't add "start" and "finish"
	children if they are UNKNOWN_LOCATION.
	(selftest::test_unknown_location): New selftest.
	(selftest::test_bad_endpoints): New selftest.
	(selftest::diagnostic_format_json_cc_tests): New function.
	* json.cc (json::object::get): New function.
	(selftest::test_object_get): New selftest.
	(selftest::json_cc_tests): Call it.
	* json.h (json::object::get): New decl.
	* selftest-run-tests.c (selftest::run_tests): Call
	selftest::diagnostic_format_json_cc_tests.
	* selftest.h (selftest::diagnostic_format_json_cc_tests): New
	decl.

2019-05-22  Kwok Cheung Yeung  <kcy@codesourcery.com>
	    Andrew Stubbs  <amd@codesourcery.com>

	* config.gcc (gcc_cv_initfini_array): Set for AMD GCN.
	* config/gcn/gcn-run.c (init_array_kernel, fini_array_kernel): New.
	(kernel): Rename to...
	(main_kernel): ... this.
	(load_image): Load _init_array and _fini_array kernels.
	(run): Add argument for kernel to run.
	(main): Run init_array_kernel before main_kernel, and
	fini_array_kernel after.
	* config/gcn/gcn.c (gcn_handle_amdgpu_hsa_kernel_attribute): Allow
	amdgpu_hsa_kernel attribute on functions.
	(gcn_disable_constructors): Delete.
	(TARGET_ASM_CONSTRUCTOR, TARGET_ASM_DESTRUCTOR): Delete.
	* config/gcn/crt0.c (size_t): Define.
	(_init_array, _fini_array): New.
	(__preinit_array_start, __preinit_array_end,
	__init_array_start, __init_array_end,
	__fini_array_start, __fini_array_end): Declare weak references.

2019-05-22  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn.c (gcn_trampoline_init): Call "sorry" on GCN5.

2019-05-22  Jason Merrill  <jason@redhat.com>

	* gimplify.c (gimplify_cond_expr): Don't check TREE_ADDRESSABLE.

2019-05-22  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/88483
	* config/i386/i386-options.c (ix86_init_machine_status): Set
	stack_frame_required to true.
	* config/i386/i386.c (ix86_get_frame_size): New function.
	(ix86_frame_pointer_required): Replace get_frame_size with
	ix86_get_frame_size.
	(ix86_compute_frame_layout): Likewise.
	(ix86_find_max_used_stack_alignment): Changed to void.  Set
	stack_frame_required.
	(ix86_finalize_stack_frame_flags): Always call
	ix86_find_max_used_stack_alignment.  Replace get_frame_size with
	ix86_get_frame_size.
	* config/i386/i386.h (machine_function): Add stack_frame_required.

2019-05-22  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/sse.md (sse_cvtpi2ps): Use TARGET_MMX in insn condition.

2019-05-22  Matthew Malcomson  <matthew.malcomson@arm.com>

	* common/config/aarch64/aarch64-common.c
	(struct aarch64_option_extension, struct processor_name_to_arch,
	struct arch_to_arch_name, aarch64_parse_extension, opt_ext_cmp,
	aarch64_contains_opt,
	aarch64_get_extension_string_for_isa_flags): Change type of
	variables storing flags to uint64_t.
	* config/aarch64/aarch64-option-extensions.def (sve2, sve2-sm4,
	sve2-aes, sve2-sha3, bitperm): New optional SVE2 extension flags.
	* config/aarch64/aarch64.c (struct processor,
	aarch64_parse_arch, aarch64_parse_cpu, aarch64_validate_mcpu,
	aarch64_validate_march, aarch64_override_options,
	aarch64_option_print, aarch64_handle_attr_isa_flags,
	aarch64_declare_function_name, aarch64_start_file): Make flag
	variables uint64_t.
	* config/aarch64/aarch64.h (AARCH64_FL_SVE2, AARCH64_FL_SVE2_AES,
	AARCH64_FL_SVE2_SM4, AARCH64_FL_SVE2_SHA3,
	AARCH64_FL_SVE2_BITPERM): New macro feature flags.
	* config/aarch64/aarch64.opt (aarch64_isa_flags): Make uint64_t.
	* config/aarch64/driver-aarch64.c
	(struct aarch64_arch_extension, struct aarch64_core_data,
	struct aarch64_arch_driver_info, host_detect_local_cpu): Make
	flag variables uint64_t.
	* doc/invoke.texi: Add documentation for new arguments.

2019-05-22  Richard Biener  <rguenther@suse.de>

	* alias.c (ao_ref_from_mem): Move stack-slot sharing
	rewrite ...
	* emit-rtl.c (set_mem_attributes_minus_bitpos): ... here.

2019-05-22  Martin Liska  <mliska@suse.cz>

	PR lto/90500
	* doc/extend.texi: Document the change.

2019-05-22  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/90450
	* tree-ssa-loop-im.c (struct im_mem_ref): Add ref_decomposed.
	(mem_ref_hasher::equal): Check it.
	(mem_ref_alloc): Initialize it.
	(gather_mem_refs_stmt): Set it.

2019-05-22  Richard Biener  <rguenther@suse.de>

	* gimple-fold.c (arith_code_with_undefined_signed_overflow):
	Add ABS_EXPR.
	(rewrite_to_defined_overflow): Handle rewriting ABS_EXPR
	as ABSU_EXPR.

2019-05-22  Alan Modra  <amodra@gmail.com>

	* config/rs6000/rs6000.h (ASM_OPT_ANY): Define.
	(ASM_CPU_SPEC): Conditionally add -many.
	* config/rs6000/rs6000.c (rs6000_machine): New static var.
	(rs6000_machine_from_flags, emit_asm_machine): New functions..
	(rs6000_file_start): ..extracted from here, and modified to
	test all ISA bits.
	(rs6000_output_function_prologue): Emit .machine as necessary.

2019-05-22  Hans-Peter Nilsson  <hp@axis.com>

	PR middle-end/90553
	* ira-lives.c (process_bb_node_lives): Consider defs
	for a call insn to be die before the call, not after.

	* function.c (assign_parm_setup_block): Raise alignment of
	stacked parameter only for STRICT_ALIGNMENT targets.

2019-05-21  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/constraints.md (define_register_constraint "wz"):
	Delete.
	* config/rs6000/rs6000.h (enum r6000_reg_class_enum): Delete
	RS6000_CONSTRAINT_wz.
	* config/rs6000/rs6000.c (rs6000_debug_reg_global): Adjust.
	(rs6000_init_hard_regno_mode_ok): Adjust.
	* config/rs6000/rs6000.md: Replace "wz" constraint by "d" with "p7".
	* doc/md.texi (Machine Constraints): Adjust.

2019-05-21  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/constraints.md (define_register_constraint "wl"):
	Delete.
	* config/rs6000/rs6000.h (enum r6000_reg_class_enum): Delete
	RS6000_CONSTRAINT_wl.
	* config/rs6000/rs6000.c (rs6000_debug_reg_global): Adjust.
	(rs6000_init_hard_regno_mode_ok): Adjust.
	* config/rs6000/rs6000.md: Replace "wl" constraint by "d" with "p6".
	* doc/md.texi (Machine Constraints): Adjust.

2019-05-21  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/constraints.md (define_register_constraint "wm"):
	Delete.
	* config/rs6000/rs6000.h (enum r6000_reg_class_enum): Delete
	RS6000_CONSTRAINT_wm.
	* config/rs6000/rs6000.c (rs6000_debug_reg_global): Adjust.
	(rs6000_init_hard_regno_mode_ok): Adjust.
	* config/rs6000/vsx.md: Replace "wm" constraint by "wa" with "p8v".
	* doc/md.texi (Machine Constraints): Adjust.

2019-05-21  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/constraints.md (define_register_constraint "wk"):
	Delete.
	* config/rs6000/rs6000.h (enum r6000_reg_class_enum): Delete
	RS6000_CONSTRAINT_wk.
	* config/rs6000/rs6000.c (rs6000_debug_reg_global): Adjust.
	(rs6000_init_hard_regno_mode_ok): Adjust.
	* config/rs6000/rs6000.md: Replace "wk" constraint by "ws" with "p8v".
	* doc/md.texi (Machine Constraints): Adjust.

2019-05-21  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/constraints.md (define_register_constraint "wj"):
	Delete.
	* config/rs6000/rs6000.h (enum r6000_reg_class_enum): Delete
	RS6000_CONSTRAINT_wj.
	* config/rs6000/rs6000.c (rs6000_debug_reg_global): Adjust.
	(rs6000_init_hard_regno_mode_ok): Adjust.
	* config/rs6000/rs6000.md: Replace "wj" constraint by "wi" with "p8v".
	(VS_64dm): Delete.
	* config/rs6000/vsx.md: Ditto.
	* doc/md.texi (Machine Constraints): Adjust.

2019-05-21  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/constraints.md (define_register_constraint "wh"):
	Delete.
	* config/rs6000/rs6000.h (enum r6000_reg_class_enum): Delete
	RS6000_CONSTRAINT_wh.
	* config/rs6000/rs6000.c (rs6000_debug_reg_global): Adjust.
	(rs6000_init_hard_regno_mode_ok): Adjust.
	* config/rs6000/rs6000.md: Replace "wh" constraint by "wa" with "p8v".
	* doc/md.texi (Machine Constraints): Adjust.

2019-05-21  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/90547
	* config/i386/i386.md (anddi_1 to andsi_1_zext splitter):
	Avoid calling gen_lowpart with CONST operand.

2019-05-21  Alexandre Oliva  <aoliva@redhat.com>

	* tree-ssa-threadupdate.c (struct ssa_local_info_t): Add
	field template_last_to_copy.
	(ssa_create_duplicates): Set it, and use it.  Attempt to
	preserve more debug stmts.

2019-05-21  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/sse.md (VF1_AVX2): New mode iterator.
	(signbit<mode>2): New expander

2019-05-21  James Clarke  <jrtc27@jrtc27.com>

	PR bootstrap/87338
	* dwarf2out.c (dwarf2out_inline_entry): Use ASM_OUTPUT_DEBUG_LABEL
	instead of ASM_GENERATE_INTERNAL_LABEL and ASM_OUTPUT_LABEL.

2019-05-21  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/cpuid.h (__cpuid): For 32bit targets, zero
	%ebx and %ecx bafore calling cpuid with leaf 1 or
	non-constant leaf argument.

2019-05-21  Alan Modra  <amodra@gmail.com>

	PR target/90545
	* config/rs6000/rs6000.c (rs6000_register_move_cost): Increase
	power9 direct move cost.

2019-05-21  Richard Biener  <rguenther@suse.de>

	PR middle-end/90510
	* fold-const.c (fold_read_from_vector): New function.
	* fold-const.h (fold_read_from_vector): Declare.
	* match.pd (VEC_PERM_EXPR): Build BIT_INSERT_EXPRs for
	single-element insert permutations.  Canonicalize selector
	further and fix issue with last commit.

2019-05-21  Vladislav Ivanishin  <vlad@ispras.ru>

	* tree-cfg.h (split_critical_edges): Add for_edge_insertion_p
	parameter with default value false to declaration.
	(split_edges_for_insertion): New inline function.  Wrapper for
	split_critical_edges with for_edge_insertion_p = true.
	* tree-cfg.c (split_critical_edges): Don't split non-critical
	edges if for_edge_insertion_p is false.  Fix whitespace.
	* tree-ssa-pre.c (pass_pre::execute): Call
	split_edges_for_insertion instead of split_critical_edges.
	* tree-ssa-tail-merge.c (tail_merge_optimize): Ditto.
	* tree-ssa-sink.c (pass_sink_code::execute): Ditto.
	(pass_data_sink_code): Update function name in the comment.

2019-05-21  Vladislav Ivanishin  <vlad@ispras.ru>

	* tree-ssa-uninit.c (value_sat_pred_p): This new function is a wrapper
	around is_value_included_in that knows how to handle BIT_AND_EXPR.
	(is_pred_expr_subset_of): Use the new function.  Handle more cases where
	code1 == EQ_EXPR and where code1 == BIT_AND_EXPR and thus fix some false
	positives.

2019-05-21  Martin Liska  <mliska@suse.cz>

	* config/rs6000/driver-rs6000.c (elf_platform): Do not use
	an extra newline.
	* config/rs6000/rs6000-c.c (rs6000_pragma_longcal): Wrap pragma in %<%>.
	(altivec_resolve_overloaded_builtin): Likewise for vec_lvsl and
	vec_lvsr.
	* config/rs6000/rs6000.c (rs6000_option_override_internal):
	Quote a C type.
	(rs6000_function_arg): Likewise.
	(rs6000_expand_set_fpscr_drn_builtin): Remove trailing dot.
	(rs6000_expand_ternop_builtin): Use interval syntax.
	(get_element_number): Likewise.
	(altivec_expand_builtin): Likewise.
	(rs6000_get_function_versions_dispatcher): Quote target_clones.

2019-05-20  Jakub Jelinek  <jakub@redhat.com>

	PR c++/59813
	PR target/90418
	* function.h (struct function): Add calls_eh_return member.
	* gimplify.c (gimplify_call_expr): Set cfun->calls_eh_return when
	gimplifying __builtin_eh_return call.
	* tree-inline.c (initialize_cfun): Copy calls_eh_return from src_cfun
	to cfun.
	(expand_call_inline): Or in src_cfun->calls_eh_return into
	dst_cfun->calls_eh_return.
	* tree-tailcall.c (suitable_for_tail_call_opt_p): Return false if
	cfun->calls_eh_return.
	* lto-streamer-in.c (input_struct_function_base): Read calls_eh_return.
	* lto-streamer-out.c (output_struct_function_base): Write
	calls_eh_return.

2019-05-20  Marc Glisse  <marc.glisse@inria.fr>

	PR rtl-optimization/43147
	* config/i386/i386.c (ix86_gimple_fold_builtin): Handle
	IX86_BUILTIN_SHUFPD.

2019-05-20  Jan Hubicka  <hubicka@ucw.cz>

	* tree-ssa-alias.c (refs_may_alias_p_2): Break out from ...
	(refs_may_alias_p_1): ... here; update stats.
	(refs_may_alias_p): Do not update stats here.

2019-05-20  Richard Biener  <rguenther@suse.de>

	* tree-ssa-structalias.c (find_func_aliases): POINTER_DIFF_EXPR
	doesn't produce pointers.
	{TRUNC,CEIL,FLOOR,ROUND,EXACT}_{DIV,MOD}_EXPR points to what
	the first operand points to.

2019-05-20  Jan Hubicka  <hubicka@ucw.cz>

	* tree-ssa-alias.c (compare_sizes): New function.
	(sompare_type_sizes): New function
	(aliasing_component_refs_p): Use it.
	(indirect_ref_may_alias_decl_p): Likewise.

2019-05-20  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

	* config/i386/sol2.h (CC1_SPEC): Reject -mx32.

2019-05-20  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

	* config/sol2.h (LIBTSAN_EARLY_SPEC): Remove : after %e.
	(LIBLSAN_EARLY_SPEC): Likewise.
	* config/i386/sol2.h (ASAN_REJECT_SPEC): Likewise.

2019-05-20  Martin Liska  <mliska@suse.cz>

	* config/i386/i386.c (ix86_libc_has_fast_function):
	Add ATTRIBUTE_UNUSED for the argument.

2019-05-20  Richard Biener  <rguenther@suse.de>

	* gimple-match-head.c: Include vec-perm-indices.h.
	* generic-match-head.c: Likewise.
	* fold-const.h (fold_vec_perm): Declare when vec-perm-indices.h
	is included.
	* fold-const.c (fold_vec_perm): Export.
	(fold_ternary_loc): Move non-constant folding of VEC_PERM_EXPR...
	(match.pd): ...here.

2019-05-20  Jakub Jelinek  <jakub@redhat.com>

	* cfgloop.h (struct loop): Add simdlen member.
	* cfgloopmanip.c (copy_loop_info): Copy simdlen as well.
	* omp-expand.c (expand_omp_simd): Set it if simdlen clause is present.
	* tree-vect-loop.c (vect_analyze_loop): Pass loop->simdlen != 0
	as new argument to autovectorize_vector_sizes target hook.  If
	loop->simdlen, pick up vector size where the vectorization factor
	is equal to loop->simd, and if there is none, fall back to the first
	successful one.
	(vect_transform_loop): Adjust autovectorize_vector_sizes target hook
	caller.
	* omp-low.c (omp_clause_aligned_alignment): Likewise.
	* omp-general.c (omp_max_vf): Likewise.
	* optabs-query.c (can_vec_mask_load_store_p): Likewise.
	* tree-vect-slp.c (vect_slp_bb): Likewise.
	* target.def (autovectorize_vector_sizes): Add ALL argument and
	document it.
	* doc/tm.texi: Adjust documentation.
	* targhooks.c (default_autovectorize_vector_sizes): Add bool argument.
	* targhooks.h (default_autovectorize_vector_sizes): Likewise.
	* config/aarch64/aarch64.c (aarch64_autovectorize_vector_sizes): Add
	bool argument.
	* config/arc/arc.c (arc_autovectorize_vector_sizes): Likewise.
	* config/arm/arm.c (arm_autovectorize_vector_sizes): Likewise.
	* config/mips/mips.c (mips_autovectorize_vector_sizes): Likewise.
	* config/i386/i386.c (ix86_autovectorize_vector_sizes): Likewise.  If
	true and TARGET_AVX512F or TARGET_AVX, push 3 or 2 sizes even if
	preferred vector size is not 512-bit or 256-bit, just put those
	unpreferred ones last.

2019-05-20  Martin Liska  <mliska@suse.cz>

	* targhooks.c (default_libc_has_fast_function): New function.
	* targhooks.h (default_libc_has_fast_function): Likewise.

2019-05-20  Martin Liska  <mliska@suse.cz>

	PR middle-end/90263
	* builtins.c (expand_builtin_memory_copy_args): When having a
	target with fast mempcpy implementation do now use memcpy.
	* config/i386/i386.c (ix86_libc_has_fast_function): New.
	(TARGET_LIBC_HAS_FAST_FUNCTION): Likewise.
	* doc/tm.texi: Likewise.
	* doc/tm.texi.in: Likewise.
	* target.def:
	* expr.c (emit_block_move_hints): Add 2 new arguments.
	* expr.h (emit_block_move_hints): Bail out when libcall
	to memcpy would be used.

2019-05-20  Martin Liska  <mliska@suse.cz>

	* profile-count.c: Add vertical spacing in order
	to separate functions.
	* profile-count.h: Likewise.

2019-05-20  Martin Liska  <mliska@suse.cz>

	* profile-count.h: Do not use full qualified
	names if possible.
	* profile-count.c (profile_count::to_frequency): Likewise.

2019-05-20  Martin Liska  <mliska@suse.cz>

	* profile-count.h (enum profile_quality): Use capital letters
	for enum value names.  Use the adjusted names.
	* profile-count.c: Use the adjusted names.

2019-05-19  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/constraints.md (define_register_constraint "wH"):
	Delete.
	(define_register_constraint "wI"): Delete.
	* config/rs6000/rs6000.h (enum r6000_reg_class_enum): Delete
	RS6000_CONSTRAINT_wH and RS6000_CONSTRAINT_wI.
	* config/rs6000/rs6000.c (rs6000_debug_reg_global): Adjust.
	(rs6000_init_hard_regno_mode_ok): Adjust.
	* config/rs6000/rs6000.md: Replace "wH" and "wI" constraints by "v"
	resp. "d", or with "wa" as appropriate, all with "p8v".
	* config/rs6000/vsx.md: Ditto.
	* doc/md.texi (Machine Constraints): Adjust.

2019-05-19  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/constraints.md (define_register_constraint "wy"):
	Delete.
	* config/rs6000/rs6000.h (enum r6000_reg_class_enum): Delete
	RS6000_CONSTRAINT_wy.
	* config/rs6000/rs6000.c (rs6000_debug_reg_global): Adjust.
	(rs6000_init_hard_regno_mode_ok): Adjust.
	* config/rs6000/rs6000.md: Replace "wy" constraint by "wa" with "p8v".
	Use "<Fisa>" as "isa" in all alternatives that use "<Fv2>".
	(define_mode_attr Fisa): New.
	* config/rs6000/vsx.md: Replace "wy" constraint by "wa" with "p8v".
	* doc/md.texi (Machine Constraints): Adjust.

2019-05-19  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/constraints.md (define_register_constraint "wu"):
	Delete.
	* config/rs6000/rs6000.h (enum r6000_reg_class_enum): Delete
	RS6000_CONSTRAINT_wu.
	* config/rs6000/rs6000.c (rs6000_debug_reg_global): Adjust.
	(rs6000_init_hard_regno_mode_ok): Adjust.
	* config/rs6000/rs6000.md: Replace "wu" constraint by "v" or "wa",
	both with "p8v".
	(define_mode_attr Fa): Delete.
	* config/rs6000/vsx.md: Ditto.
	* doc/md.texi (Machine Constraints): Adjust.

2019-05-19  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/constraints.md (define_register_constraint "wJ"):
	Delete.
	(define_register_constraint "wK"): Delete.
	* config/rs6000/rs6000.h (enum r6000_reg_class_enum): Delete
	RS6000_CONSTRAINT_wJ and RS6000_CONSTRAINT_wK.
	* config/rs6000/rs6000.c (rs6000_debug_reg_global): Adjust.
	(rs6000_init_hard_regno_mode_ok): Adjust.
	* config/rs6000/rs6000.md: Replace "wJ" constraint by "wI" with "p9v".
	Replace "wK" constraint by "wH" with "p9v".
	* config/rs6000/vsx.md: Ditto.
	* doc/md.texi (Machine Constraints): Adjust.

2019-05-19  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/constraints.md (define_register_constraint "wb"):
	Delete.
	* config/rs6000/rs6000.h (enum r6000_reg_class_enum): Delete
	RS6000_CONSTRAINT_wb.
	* config/rs6000/rs6000.c (rs6000_debug_reg_global): Adjust.
	(rs6000_init_hard_regno_mode_ok): Adjust.
	* config/rs6000/rs6000.md: Replace "wb" constraint by "v" with "p9v".
	* config/rs6000/vsx.md: Ditto.
	* doc/md.texi (Machine Constraints): Adjust.

2019-05-19  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/constraints.md (define_register_constraint "wo"):
	Delete.
	* config/rs6000/rs6000.h (enum r6000_reg_class_enum): Delete
	RS6000_CONSTRAINT_wo.
	* config/rs6000/rs6000.c (rs6000_debug_reg_global): Adjust.
	(rs6000_init_hard_regno_mode_ok): Adjust.
	* config/rs6000/rs6000.md: Replace "wo" constraint by "wa" with "p9v".
	* config/rs6000/altivec.md: Ditto.
	* doc/md.texi (Machine Constraints): Adjust.

2019-05-18  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin-c.c (darwin_register_objc_includes): Do not
	prepend the sysroot when building gnu-runtime header search
	paths.

2019-05-18  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin.c (darwin_file_end): Use switch_to_section ()
	instead of direct output of the asm.

2019-05-17  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.c (restore_saved_cr): Change a boolean
	argument to be type bool (was int before).
	(rs6000_emit_epilogue): Simplify some code.  Declare some variables
	at first use.  Use type bool for some variables.  Fix a theoretical
	eh_return bug for svr4.

2019-05-17  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (isa): New attribute.
	(enabled): New attribute.

2019-05-17  Max Filippov  <jcmvbkbc@gmail.com>

	* config/aarch64/aarch64.c (aarch64_output_mi_thunk): Call
	assemble_start_function and assemble_end_function.

2019-05-17  Thomas Schwinge  <thomas@codesourcery.com>

	PR middle-end/89433
	* omp-general.c (oacc_verify_routine_clauses): Change formal
	parameters.  Add checking if already marked with an OpenACC
	'routine' directive.  Adjust all users.

	PR middle-end/89433
	* omp-general.c (oacc_build_routine_dims): Move some of its
	processing into...
	(oacc_verify_routine_clauses): ... this new function.
	* omp-general.h (oacc_verify_routine_clauses): New prototype.

2019-05-17  Iain Sandoe  <iain@sandoe.co.uk>

	* config/rs6000/rs6000.c (machopic_output_stub): Adjust the
	formating of picbase labels to match other ports.

2019-05-17  Iain Sandoe  <iain@sandoe.co.uk>

	* config/rs6000/rs6000.c (macho_branch_islands): Fix bad indent
	in the generated code.

2019-05-16  Martin Sebor  <msebor@redhat.com>

	* builtins.c (expand_builtin_atomic_always_lock_free): Quote
	identifiers, keywords, operators, and types in diagnostics.  Correct
	quoting, spelling, and sentence capitalization issues.
	(expand_builtin_atomic_is_lock_free): Same.
	(fold_builtin_next_arg): Same.
	* cfgexpand.c (expand_one_var): Same.
	(tree_conflicts_with_clobbers_p): Same.
	(expand_asm_stmt): Same.
	(verify_loop_structure): Same.
	* cgraphunit.c (process_function_and_variable_attributes): Same.
	* collect-utils.c (collect_execute): Same.
	* collect2.c (maybe_run_lto_and_relink): Same.
	(is_lto_object_file): Same.
	(scan_prog_file): Same.
	* convert.c (convert_to_real_1): Same.
	* dwarf2out.c (dwarf2out_begin_prologue): Same.
	* except.c (verify_eh_tree): Same.
	* gcc.c (execute): Same.
	(eval_spec_function): Same.
	(run_attempt): Same.
	(driver::set_up_specs): Same.
	(compare_debug_auxbase_opt_spec_function): Same.
	* gcov-tool.c (unlink_gcda_file): Same.
	(do_merge): Same.
	(do_rewrite): Same.
	* gcse.c (gcse_or_cprop_is_too_expensive): Same.
	* gimplify.c (gimplify_asm_expr): Same.
	(gimplify_adjust_omp_clauses): Same.
	* hsa-gen.c (gen_hsa_addr_insns): Same.
	(gen_hsa_insns_for_load): Same.
	(gen_hsa_cmp_insn_from_gimple): Same.
	(gen_hsa_insns_for_operation_assignment): Same.
	(gen_get_level): Same.
	(gen_hsa_alloca): Same.
	(omp_simple_builtin::generate): Same.
	(gen_hsa_atomic_for_builtin): Same.
	(gen_hsa_insns_for_call): Same.
	* input.c (dump_location_info): Same.
	* ipa-devirt.c (compare_virtual_tables): Same.
	* ira.c (ira_setup_eliminable_regset): Same.
	* lra-assigns.c (lra_assign): Same.
	* lra-constraints.c (lra_constraints): Same.
	* lto-streamer-in.c (lto_input_mode_table): Same.
	* lto-wrapper.c (get_options_from_collect_gcc_options): Same.
	(merge_and_complain): Same.
	(compile_offload_image): Same.
	(compile_images_for_offload_targets): Same.
	(debug_objcopy): Same.
	(run_gcc): Same.
	(main): Same.
	* opts.c (print_specific_help): Same.
	(parse_no_sanitize_attribute): Same.
	(print_help): Same.
	(handle_param): Same.
	* plugin.c (add_new_plugin): Same.
	(parse_plugin_arg_opt): Same.
	(try_init_one_plugin): Same.
	* print-rtl.c (debug_bb_n_slim): Quote identifiers, keywords,
	operators, and types in diagnostics.  Correct quoting and spelling
	issues.
	* read-rtl-function.c (parse_edge_flag_token): Same.
	(function_reader::parse_enum_value): Same.
	* reg-stack.c (check_asm_stack_operands): Same.
	* regcprop.c (validate_value_data): Same.
	* sched-rgn.c (make_pass_sched_fusion): Same.
	* stmt.c (check_unique_operand_names): Same.
	* targhooks.c (default_target_option_pragma_parse): Same.
	* tlink.c (recompile_files): Same.
	* toplev.c (process_options): Same.
	(do_compile): Same.
	* trans-mem.c (diagnose_tm_1): Same.
	(ipa_tm_scan_irr_block): Same.
	(ipa_tm_diagnose_transaction): Same.
	* tree-cfg.c (verify_address): Same.  Use get_tree_code_name to
	format a tree code name in a diagnostic.
	(verify_types_in_gimple_min_lval): Same.
	(verify_types_in_gimple_reference): Same.
	(verify_gimple_call): Same.
	(verify_gimple_assign_unary): Same.
	(verify_gimple_assign_binary): Same.
	(verify_gimple_assign_ternary): Same.
	(verify_gimple_assign_single): Same.
	(verify_gimple_switch): Same.
	(verify_gimple_label): Same.
	(verify_gimple_phi): Same.
	(verify_gimple_in_seq): Same.
	(verify_eh_throw_stmt_node): Same.
	(collect_subblocks): Same.
	(gimple_verify_flow_info): Same.
	(do_warn_unused_result): Same.
	* tree-inline.c (expand_call_inline): Same.
	* tree-into-ssa.c (update_ssa): Same.
	* tree.c (tree_int_cst_elt_check_failed): Same.
	(tree_vec_elt_check_failed): Same.
	(omp_clause_operand_check_failed): Same.
	(verify_type_variant): Same.
	(verify_type): Same.
	* value-prof.c (verify_histograms): Same.
	* varasm.c (assemble_start_function): Same.

2019-05-16  Martin Sebor  <msebor@redhat.com>

	* config/i386/i386-expand.c (get_element_number): Quote keywords
	and other internal names in diagnostics.  Adjust other diagnostic
	formatting issues noted by -Wformat-diag.
	* config/i386/i386-features.c
	(ix86_mangle_function_version_assembler_name): Same.
	* config/i386/i386-options.c (ix86_handle_abi_attribute): Same.
	* config/i386/i386.c (ix86_function_type_abi): Same.
	(ix86_function_ms_hook_prologue): Same.
	(classify_argument): Same.
	(ix86_expand_prologue): Same.
	(ix86_md_asm_adjust): Same.
	(ix86_memmodel_check): Same.

2019-05-17  Dragan Mladjenovic  <dmladjenovic@wavecomp.com>

	* config/mips/mips.c (mips_dwarf_frame_reg_mode): Replace
	TARGET_FLOAT64 with !TARGET_FLOAT32, thus handling both fp64
	and fpxx modes.

2019-05-17  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/90497
	* config/i386/i386-expand.c (ix86_expand_builtin): Enable MMX
	intrinsics without SSE/SSE2/SSSE3.
	* config/i386/mmx.md (mmx_uavgv8qi3): Restore TARGET_3DNOW
	check.
	(*mmx_uavgv8qi3): Likewise.

2019-05-17  Richard Biener  <rguenther@suse.de>

	* gimple-pretty-print.c (dump_ternary_rhs): Handle dumping
	VEC_PERM_EXPR as __VEC_PERM with -gimple.

2019-05-17  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/s390-builtins.def (s390_vec_sldw_*): Use the
	vec_sldw insn pattern.

2019-05-17  Richard Biener  <rguenther@suse.de>

	* ccmp.c (expand_ccmp_expr_1): Do not use gimple_assign_rhs_to_tree.

2019-05-17  Martin Liska  <mliska@suse.cz>

	PR driver/90496
	* toplev.c (output_stack_usage): With LTO and sanitizer it
	happens that a global ctor (_GLOBAL__sub_I_00099_0_main)
	has no file location.

2019-05-16  Jakub Jelinek  <jakub@redhat.com>

	PR c++/90484
	* tree-ssa-scopedtables.c (equal_mem_array_ref_p): Don't assert that
	sz0 is equal to sz1, instead return false in that case.

	* omp-low.c (lower_rec_input_clauses): If OMP_CLAUSE_IF
	has non-constant expression, force sctx.lane and use two
	argument IFN_GOMP_SIMD_LANE instead of single argument.
	* tree-ssa-dce.c (eliminate_unnecessary_stmts): Don't DCE
	two argument IFN_GOMP_SIMD_LANE without lhs.
	* tree-vectorizer.h (struct _loop_vec_info): Add simd_if_cond
	member.
	(LOOP_VINFO_SIMD_IF_COND, LOOP_REQUIRES_VERSIONING_FOR_SIMD_IF_COND):
	Define.
	(LOOP_REQUIRES_VERSIONING): Or in
	LOOP_REQUIRES_VERSIONING_FOR_SIMD_IF_COND.
	* tree-vect-loop.c (_loop_vec_info::_loop_vec_info): Initialize
	simd_if_cond.
	(vect_analyze_loop_2): Punt if LOOP_VINFO_SIMD_IF_COND is constant 0.
	* tree-vect-loop-manip.c (vect_loop_versioning): Add runtime check
	from simd if clause if needed.

2019-05-16  Richard Biener  <rguenther@suse.de>

	* tree-affine.c (expr_to_aff_combination): New function split
	out from...
	(tree_to_aff_combination): ... here.
	(aff_combination_expand): Avoid building a GENERIC tree.

2019-05-16  Max Filippov  <jcmvbkbc@gmail.com>

	* cgraphunit.c (cgraph_node::expand_thunk): Remove
	assemble_start_function and assemble_end_function calls.
	* config/alpha/alpha.c (alpha_output_mi_thunk_osf): Call
	assemble_start_function and assemble_end_function.
	* config/arc/arc.c (arc_output_mi_thunk): Likewise.
	* config/arm/arm.c (arm_output_mi_thunk): Likewise.
	* config/bfin/bfin.c (bfin_output_mi_thunk): Likewise.
	* config/c6x/c6x.c (c6x_output_mi_thunk): Likewise.
	* config/cris/cris.c (cris_asm_output_mi_thunk): Likewise.
	* config/csky/csky.c (csky_output_mi_thunk): Likewise.
	* config/epiphany/epiphany.c (epiphany_output_mi_thunk): Likewise.
	* config/frv/frv.c (frv_asm_output_mi_thunk): Likewise.
	* config/i386/i386.c (x86_output_mi_thunk): Likewise.
	* config/ia64/ia64.c (ia64_output_mi_thunk): Likewise.
	* config/m68k/m68k.c (m68k_output_mi_thunk): Likewise.
	* config/microblaze/microblaze.c (microblaze_asm_output_mi_thunk):
	Likewise.
	* config/mips/mips.c (mips_output_mi_thunk): Likewise.
	* config/mmix/mmix.c (mmix_asm_output_mi_thunk): Likewise.
	* config/mn10300/mn10300.c (mn10300_asm_output_mi_thunk): Likewise.
	* config/nds32/nds32.c (nds32_asm_output_mi_thunk): Likewise.
	* config/nios2/nios2.c (nios2_asm_output_mi_thunk): Likewise.
	* config/or1k/or1k.c (or1k_output_mi_thunk): Likewise.
	* config/pa/pa.c (pa_asm_output_mi_thunk): Likewise.
	* config/riscv/riscv.c (riscv_output_mi_thunk): Likewise.
	* config/rs6000/rs6000.c (rs6000_output_mi_thunk): Likewise.
	* config/s390/s390.c (s390_output_mi_thunk): Likewise.
	* config/sh/sh.c (sh_output_mi_thunk): Likewise.
	* config/sparc/sparc.c (sparc_output_mi_thunk): Likewise.
	* config/spu/spu.c (spu_output_mi_thunk): Likewise.
	* config/stormy16/stormy16.c (xstormy16_asm_output_mi_thunk):
	Likewise.
	* config/tilegx/tilegx.c (tilegx_output_mi_thunk): Likewise.
	* config/tilepro/tilepro.c (tilepro_asm_output_mi_thunk): Likewise.
	* config/vax/vax.c (vax_output_mi_thunk): Likewise.

2019-05-16  Jan Hubicka  <hubicka@ucw.cz>

	* tree-ssa-alias.c (alias_stats): Add
	aliasing_component_refs_p_may_alias and
	aliasing_component_refs_p_no_alias.
	(dump_alias_stats): Print aliasing_component_refs_p stats.
	(aliasing_component_refs_p): Update stats.

2019-05-16  Martin Liska  <mliska@suse.cz>

	PR lto/90500
	* multiple_target.c (expand_target_clones): Do not allow
	target_clones being used with a symbol that is an alias.

2019-05-16  Vladislav Ivanishin  <vlad@ispras.ru>

	PR tree-optimization/90394
	* tree-ssa-uninit.c (is_pred_expr_subset_of): Potentially give false
	positives rather than ICE for cases where (code2 == NE_EXPR
	&& code1 == BIT_AND_EXPR).

2019-05-16  Jakub Jelinek  <jakub@redhat.com>

	PR fortran/90329
	* tree-core.h (struct tree_decl_common): Document
	decl_nonshareable_flag for PARM_DECLs.
	* tree.h (DECL_HIDDEN_STRING_LENGTH): Define.
	* calls.c (expand_call): Don't try tail call if caller
	has any DECL_HIDDEN_STRING_LENGTH PARM_DECLs that are or might be
	passed on the stack and callee needs to pass any arguments on the
	stack.
	* tree-streamer-in.c (unpack_ts_decl_common_value_fields): Use
	else if instead of series of mutually exclusive ifs.  Handle
	DECL_HIDDEN_STRING_LENGTH for PARM_DECLs.
	* tree-streamer-out.c (pack_ts_decl_common_value_fields): Likewise.

	* lto-streamer.h (LTO_major_version): Bump to 9.

2019-05-16  Jun Ma  <JunMa@linux.alibaba.com>

	PR tree-optimization/90106
	* tree-call-cdce.c (shrink_wrap_one_built_in_call_with_conds): Add
	new parameter as new internal function call, also move it to new
	basic block.
	(use_internal_fn): Pass internal function call to
	shrink_wrap_one_built_in_call_with_conds.

2019-05-15  Jakub Jelinek  <jakub@redhat.com>

	* omp-low.c (lower_rec_input_clauses): For if (0) or simdlen (1) set
	max_vf to 1.
	* omp-expand.c (expand_omp_simd): For if (0) or simdlen (1) clear
	safelen_int and set loop->dont_vectorize.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/i386-builtin.def: Enable MMX intrinsics with
	SSE/SSE2/SSSE3.
	* config/i386/i386-builtins.c (ix86_init_mmx_sse_builtins):
	Likewise.
	* config/i386/i386-expand.c (ix86_expand_builtin): Allow
	SSE/SSE2/SSSE3 to emulate MMX intrinsics with TARGET_MMX_WITH_SSE.
	* config/i386/mmintrin.h: Only require SSE2 if __MMX_WITH_SSE__
	is defined.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/mmx.md (*vec_dupv2sf): Changed to
	define_insn_and_split to support SSE emulation.
	(*vec_extractv2sf_0): Likewise.
	(*vec_extractv2sf_1): Likewise.
	(*vec_extractv2si_0): Likewise.
	(*vec_extractv2si_1): Likewise.
	(*vec_extractv2si_zext_mem): Likewise.
	(vec_setv2sf): Also allow TARGET_MMX_WITH_SSE.
	(vec_extractv2sf_1 splitter): Likewise.
	(vec_extractv2sfsf): Likewise.
	(vec_setv2si): Likewise.
	(vec_extractv2si_1 splitter): Likewise.
	(vec_extractv2sisi): Likewise.
	(vec_setv4hi): Likewise.
	(vec_extractv4hihi): Likewise.
	(vec_setv8qi): Likewise.
	(vec_extractv8qiqi): Likewise.
	(vec_extractv2sfsf): Also allow TARGET_MMX_WITH_SSE.  Pass
	TARGET_MMX_WITH_SSE ix86_expand_vector_extract.
	(vec_extractv2sisi): Likewise.
	(vec_extractv4hihi): Likewise.
	(vec_extractv8qiqi): Likewise.
	(vec_initv2sfsf): Also allow TARGET_MMX_WITH_SSE.  Pass
	TARGET_MMX_WITH_SSE to ix86_expand_vector_init.
	(vec_initv2sisi): Likewise.
	(vec_initv4hihi): Likewise.
	(vec_initv8qiqi): Likewise.
	(vec_setv2si): Also allow TARGET_MMX_WITH_SSE.  Pass
	TARGET_MMX_WITH_SSE to ix86_expand_vector_set.
	(vec_setv4hi): Likewise.
	(vec_setv8qi): Likewise.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/mmx.md (MMXMODE:mov<mode>): Also allow
	TARGET_MMX_WITH_SSE.
	(MMXMODE:*mov<mode>_internal): Likewise.
	(MMXMODE:movmisalign<mode>): Likewise.

2019-05-15  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/89021
	* config/i386/i386.md (*zero_extendsidi2): Add mmx_isa attribute.
	* config/i386/sse.md (sse2_cvtpi2pd): Ditto.
	(sse2_cvtpd2pi): Ditto.
	(sse2_cvttpd2pi): Ditto.
	(*vec_concatv2sf_sse4_1): Ditto.
	(*vec_concatv2sf_sse): Ditto.
	(*vec_concatv2si_sse4_1): Ditto.
	(*vec_concatv2si): Ditto.
	(*vec_concatv4si_0): Ditto.
	(*vec_concatv2di_0): Ditto.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/sse.md (abs<mode>2): Add SSE emulation.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/sse.md (ssse3_palignrdi): Changed to
	define_insn_and_split to support SSE emulation.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/sse.md (ssse3_psign<mode>3): Add SSE emulation.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/sse.md (ssse3_pshufbv8qi3): Changed to
	define_insn_and_split.  Also allow TARGET_MMX_WITH_SSE.  Add
	SSE emulation.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/sse.md (ssse3_pmulhrswv4hi3): Require TARGET_MMX
	or TARGET_MMX_WITH_SSE.
	(*ssse3_pmulhrswv4hi3): Add SSE emulation.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/sse.md (ssse3_pmaddubsw): Add SSE emulation.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/sse.md (ssse3_ph<plusminus_mnemonic>dv2si3):
	Changed to define_insn_and_split to support SSE emulation.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/sse.md (ssse3_ph<plusminus_mnemonic>wv4hi3):
	Changed to define_insn_and_split to support SSE emulation.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/mmx.md (mmx_<emms>): Renamed to ...
	(*mmx_<emms>): This.
	(mmx_<emms>): New expander.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/mmx.md (sse2_umulv1siv1di3): Add SSE emulation
	support.
	(*sse2_umulv1siv1di3): Add SSE2 emulation.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/mmx.md (sse_movntq): Add SSE2 emulation.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/mmx.md (mmx_psadbw): Add SSE emulation.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/mmx.md (mmx_uavgv4hi3): Also check TARGET_MMX and
	TARGET_MMX_WITH_SSE.
	(*mmx_uavgv4hi3): Add SSE emulation.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/mmx.md (mmx_uavgv8qi3): Also check TARGET_MMX
	and TARGET_MMX_WITH_SSE.
	(*mmx_uavgv8qi3): Add SSE emulation.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/xmmintrin.h: Emulate MMX maskmovq with SSE2
	maskmovdqu for __MMX_WITH_SSE__.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/mmx.md (mmx_umulv4hi3_highpart): Also check
	TARGET_MMX and TARGET_MMX_WITH_SSE.
	(*mmx_umulv4hi3_highpart): Add SSE emulation.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/mmx.md (mmx_pmovmskb): Changed to
	define_insn_and_split to support SSE emulation.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/mmx.md (mmx_<code>v4hi3): Also check TARGET_MMX
	and TARGET_MMX_WITH_SSE.
	(mmx_<code>v8qi3): Likewise.
	(smaxmin:<code>v4hi3): New.
	(umaxmin:<code>v8qi3): Likewise.
	(smaxmin:*mmx_<code>v4hi3): Add SSE emulation.
	(umaxmin:*mmx_<code>v8qi3): Likewise.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/mmx.md (mmx_pinsrw): Also check TARGET_MMX and
	TARGET_MMX_WITH_SSE.
	(*mmx_pinsrw): Add SSE emulation.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/mmx.md (mmx_pextrw): Add SSE emulation.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/sse.md (sse_cvtpi2ps): Changed to
	define_insn_and_split.  Also allow TARGET_MMX_WITH_SSE.  Add
	SSE emulation.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/sse.md (sse_cvtps2pi): Add SSE emulation.
	(sse_cvttps2pi): Likewise.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/mmx.md (mmx_pshufw): Also check TARGET_MMX and
	TARGET_MMX_WITH_SSE.
	(mmx_pshufw_1): Add SSE emulation.
	(*vec_dupv4hi): Changed to define_insn_and_split and also allow
	TARGET_MMX_WITH_SSE to support SSE emulation.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/constraints.md (Yw): New constraint.
	* config/i386/mmx.md (*vec_dupv2si): Changed to
	define_insn_and_split and also allow TARGET_MMX_WITH_SSE to
	support SSE emulation.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/mmx.md (mmx_eq<mode>3): Also allow
	TARGET_MMX_WITH_SSE.
	(*mmx_eq<mode>3): Also allow TARGET_MMX_WITH_SSE.  Add SSE
	support.
	(mmx_gt<mode>3): Likewise.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/mmx.md (mmx_andnot<mode>3): Also allow
	TARGET_MMX_WITH_SSE.  Add SSE support.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/mmx.md (any_logic:mmx_<code><mode>3): Also allow
	TARGET_MMX_WITH_SSE.
	(any_logic:<code><mode>3): New.
	(any_logic:*mmx_<code><mode>3): Also allow TARGET_MMX_WITH_SSE.
	Add SSE support.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/mmx.md (mmx_ashr<mode>3): Also allow
	TARGET_MMX_WITH_SSE.  Add SSE emulation.
	(mmx_<shift_insn><mode>3): Likewise.
	(ashr<mode>3): New.
	(<shift_insn><mode>3): Likewise.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/mmx.md (mmx_pmaddwd): Also allow TARGET_MMX_WITH_SSE.
	(*mmx_pmaddwd): Also allow TARGET_MMX_WITH_SSE.  Add SSE support.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/mmx.md (mmx_smulv4hi3_highpart): Also allow
	TARGET_MMX_WITH_SSE.
	(*mmx_smulv4hi3_highpart): Also allow TARGET_MMX_WITH_SSE. Add
	SSE support.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/mmx.md (mmx_mulv4hi3): Also allow
	TARGET_MMX_WITH_SSE.
	(mulv4hi3): New.
	(*mmx_mulv4hi3): Also allow TARGET_MMX_WITH_SSE.  Add SSE
	support.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/mmx.md (MMXMODEI8): Require TARGET_SSE2 for V1DI.
	(plusminus:mmx_<plusminus_insn><mode>3): Check
	TARGET_MMX_WITH_SSE.
	(sat_plusminus:mmx_<plusminus_insn><mode>3): Likewise.
	(<plusminus_insn><mode>3): New.
	(*mmx_<plusminus_insn><mode>3): Add SSE emulation.
	(*mmx_<plusminus_insn><mode>3): Likewise.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/i386-expand.c (ix86_split_mmx_punpck): New function.
	* config/i386/i386-protos.h (ix86_split_mmx_punpck): New
	prototype.
	* config/i386/mmx.m (mmx_punpckhbw): Changed to
	define_insn_and_split to support SSE emulation.
	(mmx_punpcklbw): Likewise.
	(mmx_punpckhwd): Likewise.
	(mmx_punpcklwd): Likewise.
	(mmx_punpckhdq): Likewise.
	(mmx_punpckldq): Likewise.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>
	    Uros Bizjak  <ubizjak@gmail.com>

	PR target/89021
	* config/i386/i386-expand.c (ix86_move_vector_high_sse_to_mmx):
	New function.
	(ix86_split_mmx_pack): Likewise.
	* config/i386/i386-protos.h (ix86_move_vector_high_sse_to_mmx):
	New prototype.
	(ix86_split_mmx_pack): Likewise.
	* config/i386/i386.md (mmx_isa): New.
	(enabled): Also check mmx_isa.
	* config/i386/mmx.md (any_s_truncate): New code iterator.
	(s_trunsuffix): New code attr.
	(mmx_packsswb): Removed.
	(mmx_packssdw): Likewise.
	(mmx_packuswb): Likewise.
	(mmx_pack<s_trunsuffix>swb): New define_insn_and_split to emulate
	MMX packsswb/packuswb with SSE2.
	(mmx_packssdw): Likewise.
	* config/i386/predicates.md (register_mmxmem_operand): New.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/i386-c.c (ix86_target_macros_internal): Define
	__MMX_WITH_SSE__ for TARGET_MMX_WITH_SSE.
	* config/i386/i386.c (ix86_set_reg_reg_cost): Add support for
	TARGET_MMX_WITH_SSE with VALID_MMX_REG_MODE.
	(ix86_vector_mode_supported_p): Likewise.
	* config/i386/i386.h (TARGET_MMX_WITH_SSE): New.

2019-05-15  Martin Liska  <mliska@suse.cz>

	PR middle-end/90478
	* tree-switch-conversion.c (jump_table_cluster::can_be_handled):
	Check for overflow.

2019-05-15  Richard Biener  <rguenther@suse.de>

	* tree-into-ssa.c (pass_build_ssa::execute): Run
	update_address_taken before going into SSA.

2019-05-15  Richard Biener  <rguenther@suse.de>

	* tree-pretty-print.c (dump_generic_node): Dump BIT_FIELD_REF
	as __BIT_FIELD_REF with type with -gimple.

2019-05-15  Vladislav Ivanishin  <vlad@ispras.ru>

	* tree-ssa-uninit.c (is_value_included_in): Remove is_unsigned and merge
	semantically equivalent branches (left over after prior refactorings).

2019-05-15  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/88828
	* tree-ssa-forwprop.c (simplify_vector_constructor): Fix
	bogus check.

2019-05-14  Richard Biener  <rguenther@suse.de>

	* tree-pretty-print.c (dump_generic_node): Dump VIEW_CONVERT_EXPR
	as __VIEW_CONVERT with -gimple.

2019-05-12  Iain Sandoe  <iain@sandoe.co.uk>

	PR target/82920
	* config/i386/darwin.h (CC1_SPEC): Report -mx32 as an error for
	Darwin.

2019-05-14  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (eh_set_lr_<mode>): Merge with following
	define_split to become a define_insn_and_split.

2019-05-14  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000-protos.h (rs6000_emit_epilogue): Change
	arguments.
	* config/rs6000/rs6000.c (rs6000_emit_epilogue): Change arguments.
	* config/rs6000/rs6000.md (epilogue_type): New define_enum.
	(sibcall_epilogue): Adjust.
	(epilogue): Adjust.

2019-05-14  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

	* config.gcc: Move *-*-solaris2.10* from obsolete configurations
	to unsupported ones.
	Simplify x86_64-*-solaris2.1[0-9]* to x86_64-*-solaris2*.
	* config.host: Likewise.
	* config/i386/sol2.h (ASM_COMMENT_START): Remove.
	* config/sparc/driver-sparc.c (host_detect_local_cpu) [__sun__ &&
	__svr4__]: Remove "brand" fallback.
	[!KSTAT_DATA_STRING]: Remove.
	* configure.ac (gcc_cv_ld_hidden): Simplify *-*-solaris2.1[0-9]*
	to *-*-solaris2*.
	(comdat_group): Likewise.
	(set_have_as_tls): Likewise.
	(gcc_cv_target_dl_iterate_phdr): Likewise.
	(gcc_cv_as_shf_merge): Remove Solaris 10/x86 workaround.
	(gcc_cv_ld_aligned_shf_merge): Remove Solaris 10/SPARC workaround.
	* configure: Regenerate.
	* doc/install.texi: Simplify Solaris target triplets.
	(Specific, i?86-*-solaris2*): Remove Solaris 10 references.
	(Specific, *-*-solaris2*): Document Solaris 10 removal.
	Remove Solaris 10 references.
	Remove obsolete Solaris bug reference.
	(Specific, sparc-sun-solaris2.10): Remove.

2019-05-14  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (any_div): New code iterator.
	(paired_mod): New code attribute.
	(sgnprefix): Handle DIV and UDIV RTXes.
	(u): Ditto.
	(<u>divmod<mode>4): Macroize expander from divmod<mode>4
	and udivmod<mode>4 patterns using any_div code iterator.
	(divmod splitters): Macroize splitters using any_div code iterator.
	(*udivmodsi4_pow2_zext_1): Use exactl_log2 in insn condition.
	(*udivmodsi4_pow2_zext_2): Ditto.
	(*<u>divmod<mode>4_noext): Macroize insn from *divmod<mode>4_noext
	and *udivmod<mode>4_noext patterns using any_div code iterator.
	(*<u>divmod<mode>4_noext_zext_1): Macroize insn from
	*divmod<mode>4_noext_zext_1 and *udivmod<mode>4_noext_zext_1
	patterns using any_div code iterator.
	(*<u>divmod<mode>4_noext_zext_2): Macroize insn from
	*divmod<mode>4_noext_zext_2 and *udivmod<mode>4_noext_zext_2
	patterns using any_div code iterator.
	(<u>divmodhiqi3): Macroize insn from divmodhiqi3 and
	udivmodhiqi3 patterns using any_extend code iterator.

2019-05-14  Richard Biener  <rguenther@suse.de>
	    H.J. Lu  <hongjiu.lu@intel.com>

	PR tree-optimization/88828
	* tree-ssa-forwprop.c (simplify_vector_constructor): Handle
	permuting in a single non-constant element not extracted
	from a vector.

2019-05-14  Przemyslaw Wirkus  <przemyslaw.wirkus@arm.com>

	* internal-fn.def (SIGNBIT): New.
	* config/aarch64/aarch64-simd.md (signbitv2sf2): New expand
	defined.
	(signbitv4sf2): Likewise.

2019-05-14  Chenghua Xu  <paul.hua.gm@gmail.com>

	PR target/90357
	* config/mips/mips.c (mips_split_move): Skip forward SRC into
	next insn when the SRC reg is dead.

2019-05-14  Bin Cheng  <bin.cheng@linux.alibaba.com>

	* gimple-ssa-strength-reduction.c (lookup_cand): Adjust index by 1.
	(alloc_cand_and_find_basis): Ditto.
	(backtrace_base_for_ref, create_mul_ssa_cand): Remove if-then-else.
	(create_mul_imm_cand, create_add_ssa_cand): Ditto.
	(create_add_imm_cand, slsr_process_cast): Ditto.
	(slsr_process_copy, replace_mult_candidate): Ditto.
	(replace_rhs_if_not_dup, replace_one_candidate): Ditto.
	(dump_cand_vec, analyze_candidates_and_replace): Skip NULL element.
	(pass_strength_reduction::execute): Init the first NULL element.

2019-05-13  Nathan Sidwell  <nathan@acm.org>

	* gcc.c (execute): Simplify cond-expr into if.  Reformat comment.
	(run_attempt): Reformat line break.

2019-05-13  David Edelsohn  <dje.gcc@gmail.com>

	PR target/90418
	* config/rs6000/rs6000.c (rs6000_emit_epilogue): Don't load EH
	data registers in sibcall epilogues.
	Don't add EH_RETURN_STACKADJ_RTX to sp in sibcall epilogues.

2019-05-13  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/89221
	* configure.ac (--enable-frame-pointer):
	Disable by default for cygwin and mingw.
	* configure: Regenerate.

2019-05-13  Nathan Sidwell  <nathan@acm.org>

	* dwarf2out.c (breakout_comdat_types): Move comment to correct
	piece of code.
	(const_ok_for_output_1): Balance parens around #if/#else/#endif
	(gen_member_die): Move abstract origin check earlier.  Only VARs
	can be static_inline_p.  Simplify splicing control flow.

2019-05-13  Richard Biener  <rguenther@suse.de>

	* tree-vect-slp.c (vect_get_and_check_slp_defs): Handle
	VIEW_CONVERT_EXPR.
	(vect_build_slp_tree_1): Likewise.

2019-05-13  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/90402
	* tree-if-conv.c (tree_if_conversion): Value number only
	the loop body by making the latch an exit of the region
	as well.
	* tree-ssa-sccvn.c (process_bb): Add flag whether to skip
	processing PHIs.
	(do_rpo_vn): Deal with multiple edges into the entry block
	that are not backedges inside the region by skipping PHIs
	of the entry block.

2019-05-13  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/90316
	* tree-ssa-pre.c (insert_aux): Fold into ...
	(insert): ... this function.  Use a RPO walk to reduce the
	number of required iterations.

2019-05-13  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/90416
	* tree-vect-stmts.c (vect_check_load_store_mask): Concatenate
	string instead of passing the second part as va_arg argument.

2019-05-13  Martin Liska  <mliska@suse.cz>

	PR gcov-profile/90380
	* gcov.c (handle_cycle): Do not support zero cycle count,
	it should not be possible.
	(path_contains_zero_cycle_arc): New function.
	(circuit): Ignore zero cycle arc counts.

2019-05-13  Martin Liska  <mliska@suse.cz>

	PR gcov-profile/90380
	* gcov.c (enum loop_type): Remove the enum and
	the operator.
	(handle_cycle): Assert that we should not reach
	a negative count.
	(circuit): Use loop_found instead of a tri-state loop_type.
	(get_cycles_count): Do not handle NEGATIVE_LOOP as it can't
	happen.

2019-05-12  Iain Sandoe  <iain@sandoe.co.uk>

	PR target/82920
	* config/i386/i386.c (ix86_output_jmp_thunk_or_indirect): New.
	(ix86_output_indirect_branch_via_reg): Use output mechanism
	accounting for __USER_LABEL_PREFIX__.
	(ix86_output_indirect_branch_via_push): Likewise.
	(ix86_output_function_return): Likewise.
	(ix86_output_indirect_function_return): Likewise.

2019-05-12  Richard Sandiford  <richard.sandiford@arm.com>

	* doc/md.texi: Document use of code attributes in rtx patterns.
	* read-md.h (rtx_reader::rtx_alloc_for_name): New member function.
	* read-rtl.c (find_code): Split out search loops into...
	(maybe_find_code): ...this new function.
	(check_code_iterator): Make the error message more informative.
	(check_code_attribute): New function.
	(rtx_reader::rtx_alloc_for_name): Likewise.
	(rtx_reader::read_rtx_code): Use rtx_alloc_for_name.
	* config/aarch64/predicates.md (aarch64_smin, aarch64_umin): Delete.
	* config/aarch64/aarch64-simd.md (*aarch64_<su>abd<mode>_3): Use
	<max_opp> directly as an rtx code instead of via a match_operator.
	* config/aarch64/aarch64-sve.md (aarch64_<su>abd<mode>_3): Likewise.
	(<su>abd<mode>_3): Update accordingly.

2019-05-12  Iain Sandoe  <iain@sandoe.co.uk>

	* config/rs6000/rs6000.c (debug_stack_info): When -mdebug=stack
	is given, print the state of the EH "save world" computation for
	Darwin.

2019-05-11  Jakub Jelinek  <jakub@redhat.com>

	PR c++/59813
	* config/aarch64/aarch64.c (aarch64_expand_epilogue): Don't add
	EH_RETURN_STACKADJ_RTX to sp in sibcall epilogues.

2019-05-11  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (floatdi<X87MODEF:mode>2_i387_with_xmm):
	Use pinsrd for TARGET_SSE4_1.
	* config/i386/sse.md (movdi_to_sse): Ditto.

2019-05-10  Richard Biener  <rguenther@suse.de>

	* tree-ssa-sccvn.c (visit_reference_op_call): Initialize value-id.
	(do_rpo_vn): Initialize next_value_id.

2019-05-10  Martin Liska  <mliska@suse.cz>

	* params.def (PARAM_GIMPLE_FE_COMPUTED_HOT_BB_THRESHOLD):
	Fix plural form.

2019-05-10  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/90385
	* tree-parloops.c (try_create_reduction_list): Punt on non-SSA_NAME
	arguments of the exit phis.

	PR c++/90383
	* tree-inline.h (struct copy_body_data): Add do_not_fold member.
	* tree-inline.c (remap_gimple_op_r): Avoid folding expressions if
	id->do_not_fold.
	(copy_tree_body_r): Likewise.
	(copy_fn): Set id.do_not_fold to true.

2019-05-10  Martin Liska  <mliska@suse.cz>

	* config/i386/i386-expand.c (ix86_expand_floorceildf_32):
	Reapply changes from r269790.

2019-05-10  Martin Liska  <mliska@suse.cz>

	PR middle-end/90340
	* doc/invoke.texi: New params.
	* params.def (PARAM_JUMP_TABLE_MAX_GROWTH_RATIO_FOR_SIZE): New.
	(PARAM_JUMP_TABLE_MAX_GROWTH_RATIO_FOR_SPEED): Likewise.
	* tree-switch-conversion.c (jump_table_cluster::can_be_handled):
	Use it.
	* tree-switch-conversion.h (struct jump_table_cluster):
	Likewise.

2019-05-09  Segher Boessenkool  <segher@kernel.crashing.org>

	* combine.c (combine_simplify_rtx): Don't make IF_THEN_ELSE RTL.

2019-05-09  Bill Schmidt  <wschmidt@linux.ibm.com>

	* doc/loop.texi: Remove reference to FOR_EACH_LOOP_BREAK.

2019-05-09  Alexander Monakov  <amonakov@ispras.ru>

	PR rtl-optimization/88879
	* sel-sched.c (sel_target_adjust_priority): Remove assert.

2019-05-09  Richard Earnshaw  <rearnsha@arm.com>

	PR target/90405
	* config/arm/arm.c (callee_saved_reg_p): Move before
	thumb_find_work_register.
	(thumb1_prologue_unused_call_clobbered_lo_regs): Move before
	thumb_find_work_register.  Only call df_get_live_out once.
	(thumb1_epilogue_unused_call_clobbered_lo_regs): Likewise.
	(thumb_find_work_register): Use
	thumb1_prologue_unused_call_clobbered_lo_regs instead of ad hoc
	algorithms to locate a spare call clobbered reg.

2019-05-09  Martin Liska  <mliska@suse.cz>

	* gimple-pretty-print.c (dump_binary_rhs): Dump MIN_EXPR
	and MAX_EXPR in GIMPLE FE format.

2019-05-09  Martin Liska  <mliska@suse.cz>

	* tree-cfg.c (dump_function_to_file): Dump entry BB count.
	* gimple-pretty-print.c (dump_gimple_bb_header):
	Dump BB count.
	(pp_cfg_jump): Dump edge probability.
	* profile-count.c (profile_quality_as_string): Simplify
	with a static array.
	(parse_profile_quality): New function.
	(profile_count::dump): Simplify with a static array.
	(profile_count::from_gcov_type): Add new argument.
	* profile-count.h (parse_profile_quality): Likewise.
	* predict.h (set_hot_bb_threshold): New.
	* params.def (PARAM_GIMPLE_FE_COMPUTED_HOT_BB_THRESHOLD):
	New param.
	* predict.c (get_hot_bb_threshold): Set from the new param.
	(set_hot_bb_threshold): New.

2019-05-09  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/90395
	* tree-ssa-forwprop.c (pass_forwprop::execute): Do not
	rewrite vector stores that throw internally.

2019-05-09  Thomas Schwinge  <thomas@codesourcery.com>

	* cif-code.def (CHKP): Remove.

	PR target/89221
	* configure.ac (--enable-frame-pointer): Disable by default for
	GNU systems.
	* configure: Regenerate.

2019-05-09  Alan Modra  <amodra@gmail.com>

	PR target/89271
	* config/rs6000/rs6000.h (enum reg_class, REG_CLASS_NAMES),
	(REG_CLASS_CONTENTS): Add GEN_OR_VSX_REGS class.
	* config/rs6000/rs6000.c (rs6000_register_move_cost): Correct
	cost for general <-> vsx when direct moves are available.
	Cost union classes at minimal cost for any reg in the class.
	Correct calculation for moves between vsx, float, and altivec.
	Don't return a low cost for moves between special regs.  Don't
	use hard coded register numbers.
	(TARGET_IRA_CHANGE_PSEUDO_ALLOCNO_CLASS): Define.
	(rs6000_ira_change_pseudo_allocno_class): New function.
	* config/rs6000/rs6000.md (movsi_internal1, mov<mode>_internal),
	(movdi_internal32, movdi_internal64): Remove '*' from vsx register
	alternatives.
	(movsi_internal1): Don't disparage vector alternatives.
	(mov<mode>_internal): Likewise, excepting alternative that
	will be split.
	* config/rs6000/vsx.md (vsx_splat_<mode>_reg): Don't disparage
	we <- b alternative.

2019-05-08  Jakub Jelinek  <jakub@redhat.com>

	PR c++/59813
	PR tree-optimization/89060
	* tree-ssa-live.h (live_vars_map): New typedef.
	(compute_live_vars, live_vars_at_stmt, destroy_live_vars): Declare.
	* tree-ssa-live.c: Include gimple-walk.h and cfganal.h.
	(struct compute_live_vars_data): New type.
	(compute_live_vars_visit, compute_live_vars_1, compute_live_vars,
	live_vars_at_stmt, destroy_live_vars): New functions.
	* tree-tailcall.c: Include tree-ssa-live.h.
	(live_vars, live_vars_vec): New global variables.
	(find_tail_calls): Perform variable life analysis before punting.
	(tree_optimize_tail_calls_1): Clean up live_vars and live_vars_vec.
	* tree-inline.h (struct copy_body_data): Add eh_landing_pad_dest
	member.
	* tree-inline.c (add_clobbers_to_eh_landing_pad): Remove BB argument.
	Perform variable life analysis to select variables that really need
	clobbers added.
	(copy_edges_for_bb): Don't call add_clobbers_to_eh_landing_pad here,
	instead set id->eh_landing_pad_dest and assert it is the same.
	(copy_cfg_body): Call it here if id->eh_landing_pad_dest is non-NULL.

2019-05-08  Mihail Ionescu  <mihail.ionescu@arm.com>
	    Richard Earnshaw  <rearnsha@arm.com>

	PR target/88167
	* config/arm/arm.c (thumb1_prologue_unused_call_clobbered_lo_regs): New
	function.
	(thumb1_epilogue_unused_call_clobbered_lo_regs): New function.
	(thumb1_compute_save_core_reg_mask): Don't force a spare work
	register if both the epilogue and prologue can use call-clobbered
	regs.
	(thumb1_unexpanded_epilogue): Use
	thumb1_epilogue_unused_call_clobbered_lo_regs.  Reverse the logic for
	picking temporaries for restoring high regs to match that of the
	prologue where possible.
	(thumb1_expand_prologue): Add any usable call-clobbered low registers to
	the list of work registers.  Detect if the return address is still live
	at the end of the prologue and avoid using it for a work register if so.
	If the return address is not live, add LR to the list of pushable regs
	after the first pass.

2019-05-08  Bin Cheng  <bin.cheng@linux.alibaba.com>

	PR tree-optimization/90078
	* tree-ssa-loop-ivopts.c (inttypes.h): Include new header file.
	(INFTY): Increase the value for infinite cost.
	(struct comp_cost): Promote type of members to int64_t.
	(infinite_cost): Don't set complexity in initialization.
	(comp_cost::operator +,-,+=,-+,/=,*=): Assert when cost computation
	overflows to infinite_cost.
	(adjust_setup_cost): Promote type of parameter and cost computation
	to int64_t.
	(struct ainc_cost_data, struct iv_ca): Promote type of member to
	int64_t.
	(get_scaled_computation_cost_at, determine_iv_cost): Promote type of
	cost computation to int64_t.
	(determine_group_iv_costs, iv_ca_dump, find_optimal_iv_set): Use
	int64_t's format specifier in dump.

2019-05-08  Bin Cheng  <bin.cheng@linux.alibaba.com>

	PR tree-optimization/90240
	* tree-ssa-loop-ivopts.c (get_scaled_computation_cost_at): Scale cost
	with respect to scaling factor pre-computed for each basic block.
	(try_improve_iv_set): Return bool if best_cost equals to iv_ca cost.
	(find_optimal_iv_set_1): Free iv_ca set if it has infinite_cost.
	(COST_SCALING_FACTOR_BOUND, determine_scaling_factor): New.
	(tree_ssa_iv_optimize_loop): Call determine_scaling_factor.  Extend
	live range for array of loop's basic blocks.  Cleanup aux field of
	loop's basic blocks.

2019-05-08  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/90356
	* match.pd ((X +/- 0.0) +/- 0.0): Optimize into X +/- 0.0 if possible.

2019-05-07  Wei Xiao  <wei3.xiao@intel.com>

	* common/config/i386/i386-common.c (OPTION_MASK_ISA_AVX512BF16_SET
	OPTION_MASK_ISA_AVX512BF16_UNSET, OPTION_MASK_ISA2_AVX512BW_UNSET): New.
	(OPTION_MASK_ISA2_AVX512F_UNSET): Add OPTION_MASK_ISA_AVX512BF16_UNSET.
	(ix86_handle_option): Handle -mavx512bf16.
	* config.gcc: Add avx512bf16vlintrin.h and avx512bf16intrin.h
	to extra_headers.
	* config/i386/avx512bf16vlintrin.h: New.
	* config/i386/avx512bf16intrin.h: New.
	* config/i386/cpuid.h (bit_AVX512BF16): New.
	* config/i386/driver-i386.c (host_detect_local_cpu): Detect BF16.
	* config/i386/i386-builtin-types.def: Add new types.
	* config/i386/i386-builtin.def: Add new builtins.
	* config/i386/i386-c.c (ix86_target_macros_internal): Define
	__AVX512BF16__.
	* config/i386/i386-option.c (ix86_target_string): Add -mavx512bf16.
	(ix86_option_override_internal): Handle BF16.
	(ix86_valid_target_attribute_inner_p): Ditto.
	* config/i386/i386-expand.c (ix86_expand_args_builtin): Ditto.
	* config/i386/i386-builtin.c (enum processor_features): Add
	F_AVX512BF16.
	(static const _isa_names_table isa_names_table): Ditto.
	* config/i386/i386.h (TARGET_AVX512BF16, TARGET_AVX512BF16_P): New.
	(PTA_AVX512BF16): Ditto.
	* config/i386/i386.opt: Add -mavx512bf16.
	* config/i386/immintrin.h: Include avx512bf16intrin.h
	and avx512bf16vlintrin.h.
	* config/i386/sse.md (avx512f_cvtne2ps2bf16_<mode><mask_name>,
	avx512f_cvtneps2bf16_<mode><mask_name>,
	avx512f_dpbf16ps_<mode><mask_half_name>): New define_insn patterns.
	* config/i386/subst.md (mask_half): Add new subst.
	* doc/invoke.texi: Document -mavx512bf16.

2019-05-07  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000-protos.h (rs6000_legitimize_reload_address_ptr):
	Delete declaration.
	* config/rs6000/rs6000.c (rs6000_legitimize_reload_address): Delete.
	(rs6000_debug_legitimize_reload_address): Delete.
	(rs6000_legitimize_reload_address_ptr): Delete.
	(rs6000_option_override_internal): Adjust.
	(mem_operand_gpr): Adjust comment.
	(legitimate_lo_sum_address_p): Ditto.
	(rs6000_legitimize_reload_address): Delete.
	(rs6000_debug_legitimize_reload_address): Delete.
	* config/rs6000/rs6000.h (LEGITIMIZE_RELOAD_ADDRESS): Delete.

2019-05-07  Kelvin Nilsen  <kelvin@gcc.gnu.org>

	PR target/89765
	* config/rs6000/rs6000-c.c (altivec_resolve_overloaded_builtin):
	In handling of ALTIVEC_BUILTIN_VEC_INSERT, use modular arithmetic
	to compute vector element selector for both constant and variable
	operands.

2019-05-07  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (cvt_mnemonic): New mode attribute.
	(ashr<mode>3_cvt): Merge insn pattern from ashrsi3_cvt and
	ashrdi3_cvt using SWI48 mode iterator.

2019-05-07  Alejandro Martinez  <alejandro.martinezvicente@arm.com>

	* config/aarch64/aarch64-sve.md (<su>abd<mode>_3): New define_expand.
	(aarch64_<su>abd<mode>_3): Likewise.
	(*aarch64_<su>abd<mode>_3): New define_insn.
	(<sur>sad<vsi2qi>): New define_expand.
	* config/aarch64/iterators.md: Added MAX_OPP attribute.
	* tree-vect-loop.c (use_mask_by_cond_expr_p): Add SAD_EXPR.
	(build_vect_cond_expr): Likewise.

2019-05-07  Uroš Bizjak  <ubizjak@gmail.com>

	* cfgexpand.c (asm_clobber_reg_is_valid): Reject
	clobbers outside of accessible_reg_set.
	* config/i386/i386.c (ix86_conditional_register_usage):
	Disable register sets by clearing corresponding bits in
	accessible_reg_set.  Do not set corresponding bits in fixed_regs,
	call_used_regs and don't clear corresponding reg_names array members.

2019-05-07  Richard Biener  <rguenther@suse.de>

	* tree-vect-stmts.c (vect_is_simple_cond): When vectype is
	not specified still compute a comp_vectype for invariant
	compares.

2019-05-07  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/90316
	* tree-ssa-pre.c (translate_vuse_through_block): When
	same_valid is NULL do not bother to search for a virtual
	PHI continuation.
	(phi_translate_1): When operands changed we cannot keep
	the same value-number so do not bother to ask whether
	that's possible from translate_vuse_through_block.

2019-05-07  Martin Liska  <mliska@suse.cz>

	* bitmap.c (bitmap_register): Come up with
	alloc_descriptor_max_uid and assign it for
	a new bitmap.
	(register_overhead): Use get_descriptor as
	a descriptor.
	(release_overhead): New.
	(bitmap_elem_to_freelist): Call it.
	(bitmap_elt_clear_from): Likewise.
	(bitmap_obstack_free): Likewise.
	(bitmap_move): Sensitively release memory.
	* bitmap.h (struct GTY): Add alloc_descriptor and padding.
	(bitmap_initialize): Initialize alloc_descriptor to zero.
	* tree-ssa-pre.c (do_hoist_insertion): Use bitmap_move.

2019-05-07  Richard Biener  <rguenther@suse.de>

	* tree-vect-slp.c (vect_build_slp_tree_2): Bump size whenever
	we build a SLP node.  Remove max_size and limiting.
	(vect_analyze_slp_instance): Record and dump size of the SLP graph.

2019-05-07  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/90316
	* tree-ssa-alias.h (get_continuation_for_phi): Take walking
	limit by reference.
	(walk_non_aliased_vuses): Take walking limit argument.
	* tree-ssa-alias.c (maybe_skip_until): Take limit and abort
	walking if it is reached instead of just counting.
	(get_continuation_for_phi): Likewise.
	(walk_non_aliased_vuses): Likewise, instead of leaving counter
	limiting to the callback.
	* tree-ssa-sccvn.c (vn_reference_lookup_2): Adjust.
	(vn_reference_lookup_3): Likewise.
	(vn_reference_lookup_pieces): Likewise.
	(vn_reference_lookup): Likewise.
	* tree-ssa-pre.c (translate_vuse_through_block): Limit walking.
	* tree-ssa-scopedtables.c (vuse_eq): Adjust.
	(avail_exprs_stack::lookup_avail_expr): Likewise.

2019-05-07  Jan Hubicka  <hubicka@ucw.cz>

	* tree-ssa-alias.c (aliasing_component_refs_p): Continue looking
	for comparaible types in the second direction even if first one
	hits incomparable type.

2019-05-07  Richard Biener  <rguenther@suse.de>

	PR lto/90369
	* lto-wrapper.c (debug_objcopy): Use the original filename
	including archive offset for the filename used for -save-temps.

2019-05-07  Li Jia He  <helijia@linux.ibm.com>

	* tree-ssa-phiopt.c (two_value_replacement): Fix a typo in parameter
	detection.

2019-05-06  H.J. Lu  <hongjiu.lu@intel.com>
	    Hongtao Liu  <hongtao.liu@intel.com>

	PR target/89750
	PR target/86444
	* config/i386/i386-expand.c (ix86_expand_sse_comi_round):
	Modified, original implementation isn't correct.

2019-05-06  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (FIRST_ALTIVEC_REGNO, LAST_ALTIVEC_REGNO)
	(LR_REGNO, CTR_REGNO, CA_REGNO, ARG_POINTER_REGNUM, CR0_REGNO)
	(CR1_REGNO, CR2_REGNO, CR3_REGNO, CR4_REGNO, CR5_REGNO, CR6_REGNO)
	(CR7_REGNO, MAX_CR_REGNO, VRSAVE_REGNO, VSCR_REGNO)
	(FRAME_POINTER_REGNUM): Change numbering.
	* config/rs6000/rs6000.c (rs6000_reg_names): Adjust.
	(alt_reg_names): Adjust.
	(rs6000_conditional_register_usage): Don't mark hard register 64 as
	fixed.
	* config/rs6000/rs6000.h (FIRST_PSEUDO_REGISTER): Adjust.
	(DWARF_FRAME_REGISTERS): Delete.
	(DWARF2_FRAME_REG_OUT): Fix whitespace.
	(FIXED_REGISTERS, CALL_USED_REGISTERS, CALL_REALLY_USED_REGISTERS):
	Adjust.
	(REG_ALLOC_ORDER): Adjust.
	(FRAME_POINTER_REGNUM, ARG_POINTER_REGNUM): Adjust.
	(REG_CLASS_CONTENTS): Adjust.
	(RETURN_ADDR_RTX): Change comment.
	(REGNO_OK_FOR_INDEX_P, REGNO_OK_FOR_BASE_P): Use ARG_POINTER_REGNUM
	instead of 67.
	(REGISTER_NAMES): Adjust.
	(ADDITIONAL_REGISTER_NAMES): Adjust.
	* config/rs6000/darwin.h (REGISTER_NAMES): Adjust.

2019-05-06  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (TFHAR_REGNO, TFIAR_REGNO, TEXASR_REGNO):
	Delete.
	* config/rs6000/rs6000.h (FIRST_PSEUDO_REGISTER): Adjust.
	(DWARF_FRAME_REGISTERS): Adjust.
	(FIXED_REGISTERS, CALL_USED_REGISTERS, CALL_REALLY_USED_REGISTERS):
	Adjust.
	(REG_ALLOC_ORDER): Adjust.
	(enum reg_class): Delete SPR_REGS.
	(REG_CLASS_NAMES): Delete SPR_REGS.
	(REG_CLASS_CONTENTS): Delete SPR_REGS.  Adjust for deleted TM regs.
	(REGISTER_NAMES): Adjust.
	(ADDITIONAL_REGISTER_NAMES): Adjust.
	* config/rs6000/darwin.h (REGISTER_NAMES): Adjust.
	* config/rs6000/htm.md (htm_mfspr_<mode>, htm_mtspr_<mode>): Adjust.
	* config/rs6000/predicates.md (htm_spr_reg_operand): Delete.
	* config/rs6000/rs6000.c (rs6000_init_hard_regno_mode_ok): Adjust.
	(htm_spr_regno): Delete.
	(htm_expand_builtin): Adjust: the HTM builtins now have one fewer
	argument.
	(rs6000_dbx_register_number): Adjust.

2019-05-06  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.h (PRE_GCC3_DWARF_FRAME_REGISTERS): Delete.

2019-05-06  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.c (rs6000_dbx_register_number): Handle
	FRAME_POINTER_REGNUM, ARG_POINTER_REGNUM, and 64 (which was MQ).

2019-05-06  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/88709
	PR tree-optimization/90271
	* params.def (PARAM_STORE_MERGING_MAX_SIZE): New parameter.
	* gimple-ssa-store-merging.c (encode_tree_to_bitpos): Handle
	non-clobber CONSTRUCTORs with no elts.  Remove useless tmp_int
	variable.
	(imm_store_chain_info::coalesce_immediate_stores): Punt if the size
	of the store merging group is larger than
	PARAM_STORE_MERGING_MAX_SIZE parameter.
	(split_group): Add bzero_first argument.  If set, always emit first
	the first store which must be = {} of the whole area and then for the
	rest of the stores consider all zero bytes as paddings.
	(imm_store_chain_info::output_merged_store): Check if first store
	is = {} of the whole area and if yes, determine which setting of
	bzero_first for split_group gives smaller number of stores.  Adjust
	split_group callers.
	(lhs_valid_for_store_merging_p): Allow decls.
	(rhs_valid_for_store_merging_p): Allow non-clobber CONTRUCTORs with
	no elts.
	(pass_store_merging::process_store): Likewise.

2019-05-06  Kelvin Nilsen  <kelvin@gcc.gnu.org>

	PR target/89424
	* config/rs6000/rs6000.c (rs6000_expand_vector_extract): Add
	handling of V1TImode.

2019-05-06  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/89221
	* config.gcc (i[34567]86-*-*, x86_64-*-*): Move tests for enable_cld
	and enable_frame_pointer ...
	* configure.ac: ... here.  Update help strings for
	--enable-frame-pointer.
	* configure: Regenerate.
	* config/i386/i386-options.c (ix86_option_override_internal): Remove
	USE_X86_64_FRAME_POINTER define, use USE_IX86_FRAME_POINTER instead.
	* config/i386/sol2.h (USE_IX86_FRAME_POINTER): Remove.
	(USE_X86_64_FRAME_POINTER): Ditto.

2019-05-06  Martin Liska  <mliska@suse.cz>

	* config.gcc: Append to target_gtfiles and fix indentation.

2019-05-06  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/90358
	* tree-vect-stmts.c (get_group_load_store_type): Properly
	detect unused upper half of load.
	(vectorizable_load): Likewise.

2019-05-06  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/88828
	* tree-ssa-forwprop.c (get_bit_field_ref_def): Split out from...
	(simplify_vector_constructor): ...here.  Handle constants in
	the constructor.

2019-05-06  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/90328
	* tree-data-ref.h (dr_may_alias_p): Pass in the actual loop nest.
	* tree-data-ref.c (dr_may_alias_p): Check whether the clique
	is valid in the loop nest before using it.
	(initialize_data_dependence_relation): Adjust.
	* graphite-scop-detection.c (build_alias_set): Pass the SCOP enclosing
	loop as loop-nest to dr_may_alias_p.

2019-05-06  Richard Biener  <rguenther@suse.de>

	* dwarf2out.c (mem_loc_descriptor): Initialize int_mode.

2019-05-06  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/90316
	* tree-ssa-alias.c (maybe_skip_until): Pass in target BB,
	compute target on demand.
	(get_continuation_for_phi): Remove code walking stmts to
	get to a target virtual operand which could end up being
	quadratic.

2019-05-06  Martin Liska  <mliska@suse.cz>

	PR sanitizer/90312
	* config/i386/i386-options.c (ix86_option_override_internal): Error only
	when -mabi is selected to a non-default version.

2019-05-06  Hrishikesh Kulkarni  <hrishikeshparag@gmail.com>
	    Martin Liska  <mliska@suse.cz>

	* Makefile.in: Add lto-dump.texi.
	* cgraph.h: Add new functions get_visibility_string and
	get_symtab_type_string.
	* doc/gcc.texi: Include lto-dump section.
	* doc/lto-dump.texi: New file.
	* dumpfile.c (dump_switch_p_1): Use parse_dump_option.
	(parse_dump_option): Factor out this function.
	* dumpfile.h (enum dump_flag): Add new value TDF_ERROR.
	(parse_dump_option): Export the function.
	* symtab.c (symtab_node::get_visibility_string): New function.
	(symtab_node::get_symtab_type_string): Likewise.

2019-05-06  Martin Liska  <mliska@suse.cz>

	* config/i386/i386-builtins.c: New file.
	* config/i386/i386-builtins.h: New file.
	* config/i386/i386-expand.c: New file.
	* config/i386/i386-expand.h: New file.
	* config/i386/i386-features.c: New file.
	* config/i386/i386-features.h: New file.
	* config/i386/i386-options.c: New file.
	* config/i386/i386-options.h: New file.
	* config.gcc: Add new files into extra_objs and
	target_gtfiles.
	* config/i386/i386.c: Split content of the file
	into newly introduced files.
	* config/i386/i386.h: Declare common variables
	and macros.
	* config/i386/t-i386: Define dependencies for new files.

2019-05-03  Richard Earnshaw  <rearnsha@arm.com>

	PR target/89400
	* config/arm/arm.md (unaligned_loadsi): Add variant for thumb1.
	Restrict 'all' variant to 32-bit configurations.
	(unaligned_loadhiu): Likewise.
	(unaligned_storehi): Likewise.
	(unaligned_storesi): Likewise.
	(unaligned_loadhis): Disable when compiling for thumb1.

2019-05-03  Marc Glisse  <marc.glisse@inria.fr>

	PR tree-optimization/90269
	* tree-loop-distribution.c (find_seed_stmts_for_distribution):
	Ignore clobbers.

2019-05-03  Martin Liska  <mliska@suse.cz>

	* hash-map.h: Add is_empty function.
	* hash-set.h: Likewise.
	* hash-table.h: Likewise.
	* dwarf2out.c (dwarf2out_finish): Use is_empty instead of
	elements () == 0 (and similar usages).
	* gimple-ssa-store-merging.c (pass_store_merging::terminate_and_process_all_chains): Likewise.
	* gimplify.c (gimplify_bind_expr): Likewise.
	(gimplify_switch_expr): Likewise.
	* hash-map-tests.c (test_map_of_strings_to_int): Likewise.
	* ipa-icf.c (sem_item_optimizer::remove_symtab_node): Likewise.
	* postreload-gcse.c (dump_hash_table): Likewise.
	(gcse_after_reload_main): Likewise.
	* predict.c (combine_predictions_for_bb): Likewise.
	* tree-parloops.c (reduction_phi): Likewise.
	(separate_decls_in_region): Likewise.
	(transform_to_exit_first_loop): Likewise.
	(gen_parallel_loop): Likewise.
	(gather_scalar_reductions): Likewise.
	(try_create_reduction_list): Likewise.
	* var-tracking.c (dump_vars): Likewise.
	(emit_notes_for_changes): Likewise.
	(vt_emit_notes): Likewise.

2019-05-03  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/90316
	* tree-ssa-pre.c (pass_pre::execute): Re-compute DOM fast queries
	before running VN.

2019-05-03  Richard Biener  <rguenther@suse.de>

	* tree-vect-stmts.c (get_group_load_store_type): Avoid
	peeling for gaps by loading only lower halves of vectors
	if possible.
	(vectorizable_load): Likewise.

2019-05-03  Richard Biener  <rguenther@suse.de>

	PR middle-end/89518
	* match.pd: Add pattern to optimize (A / B) * B + (A % B) to A.

2019-05-03  Richard Biener  <rguenther@suse.de>

	PR middle-end/87314
	* match.pd (cmp (convert1?@2 addr@0) (convert2? addr@1)):
	Handle STRING_CST vs DECL or STRING_CST.

2019-05-03  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/88963
	* tree-ssa-forwprop.c (pass_forwprop::execute): Rewrite
	vector loads feeding only BIT_FIELD_REFs to component
	loads.  Rewrite stores fed by CONSTRUCTORs to component
	stores.

2019-05-03  Jakub Jelinek  <jakub@redhat.com>

	* opts.h (finish_options): Remove lang_mask argument.
	(print_help, help_option_argument): Declare.
	* opts.c (print_help): Remove forward declaration, no longer static.
	(finish_options): Remove lang_mask argument, don't call print_help
	here.
	* opts-global.c (decode_options): Adjust finish_option caller, call
	print_help here.

	PR tree-optimization/90303
	* ipa-devirt.c (obj_type_ref_class, get_odr_type): Don't use
	TYPE_CANONICAL for TYPE_STRUCTURAL_EQUALITY_P types in !in_lto_p mode.

2019-05-03  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/89698
	* gimple-fold.c (canonicalize_constructor_val): Early out
	for constants, handle unfolded INTEGER_CSTs as they appear in
	C++ virtual table ctors.

2019-05-03  Richard Biener  <rguenther@suse.de>

	* passes.c (execute_function_todo): Remove dead code.

2019-05-02  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.c (rs6000_dbx_register_number): Do not use
	the internal register number, for any "real" register.

2019-05-02  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.c (rs6000_dbx_register_number): Return the
	correct numbers for TFHAR, TFIAR, TEXASR.

2019-05-02  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/89653
	* tree-ssa-loop.c (pass_data_tree_loop_init): Execute
	update-address-taken before the pass.
	* passes.def (pass_tree_loop_init): Put comment before it.

2019-05-02  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/89509
	* tree-ssa-structalias.c (compute_dependence_clique): Look
	at the first subvar when determining whether it is restrict.

2019-05-02  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/90273
	* tree-ssa-dce.c (eliminate_unnecessary_stmts): Eliminate
	useless debug stmts.

2019-05-02  Alejandro Martinez  <alejandro.martinezvicente@arm.com>

	* config/aarch64/aarch64-sve.md (<sur>dot_prod<vsi2qi>): Taken from SVE
	ACLE branch.
	* config/aarch64/iterators.md: Copied Vetype_fourth, VSI2QI and vsi2qi from
	SVE ACLE branch.
	* tree-vect-loop.c (use_mask_by_cond_expr_p): New function to check if a
	VEC_COND_EXPR be inserted to emulate a conditional internal function.
	(build_vect_cond_expr): Emit the VEC_COND_EXPR.
	(vectorizable_reduction): Use the functions above to vectorize in a
	fully masked loop codes that don't have a conditional internal
	function.

2019-05-02  Martin Liska  <mliska@suse.cz>

	* cgraphclones.c: Call valid_attribute_p with 1 for
	target_clone.
	* config/i386/i386-c.c (ix86_pragma_target_parse): Use 0 as
	it's for target attribute.
	* config/i386/i386-protos.h (ix86_valid_target_attribute_tree):
	Add new boolean argument.
	* config/i386/i386.c (ix86_valid_target_attribute_inner_p):
	Likewise.
	(ix86_valid_target_attribute_tree): Pass target_clone_attr
	to ix86_valid_target_attribute_inner_p.
	(ix86_valid_target_attribute_p): Pass flags argument to
	ix86_valid_target_attribute_inner_p.
	(get_builtin_code_for_version): Use 0 as it's target attribute.

2019-05-02  Martin Liska  <mliska@suse.cz>

	* gcc.c (process_command): Add dummy file only
	if n_infiles == 0.
	* opts-global.c (decode_options): Pass lang_mask.
	* opts.c (print_help): New function.
	(finish_options): Print --help if help_option_argument
	is set.
	(common_handle_option): Factor out content of OPT__help_
	into print_help.
	* opts.h (finish_options): Add new argument.

2019-05-02  Martin Liska  <mliska@suse.cz>

	PR target/88809
	* config/i386/i386.c (ix86_expand_strlen): Use strlen call.
	With -minline-all-stringops use inline expansion using 4B loop.
	* doc/invoke.texi: Document the change of
	-minline-all-stringops.

2019-05-01  Jeff Law  <law@redhat.com>

	PR tree-optimization/88797
	* gimple-ssa-split-paths (is_feasible_trace): Reject cases where the
	PHI feeds a conditional on the RHS of an assignment.

2019-04-30  Andrew Waterman  <andrew@sifive.com>
	    Jim Wilson  <jimw@sifive.com>

	* config/riscv/constraints.md (L): New.
	* config/riscv/predicates.md (lui_operand): New.
	(sfb_alu_operand): New.
	* config/riscv/riscv-protos.h (riscv_expand_conditional_move): Declare.
	* config/riscv/riscv.c (riscv_expand_conditional_move): New.
	* config/riscv/riscv.h (TARGET_SFB_ALU): New.
	* config/riscv/risc.md (type): Add sfb_alu.
	(branch<mode>): Renamed from branch_order<mode>.  Change predicate for
	operand 3 to reg_or_0_operand.  In output string, change %3 to %z3.
	(branch_zero<mode>): Delete.
	(mov<mode>cc): New.
	(mov<GPR:mode><X:mode>cc): Likewise.
	* config/riscv/sifive-7.md (sifive_7_sfb_alu): New.  Use in bypasses.

2019-04-30  Nathan Sidwell  <nathan@acm.org>

	* tree.h (MARK_TS_EXP): New.

2019-04-30  Martin Liska  <mliska@suse.cz>

	* opts.c (enable_warning_as_error): Provide hints
	for unknown options.

2019-04-30  Martin Liska  <mliska@suse.cz>

	PR debug/90288
	* doc/invoke.texi: Add missing dash for gas-locview-support
	and gno-as-locview-support.

2019-04-30  Jakub Jelinek  <jakub@redhat.com>

	PR target/89093
	* config/aarch64/aarch64.c (aarch64_process_one_target_attr): Don't skip
	whitespace at the start of target attribute string.

2019-04-30  Ramana Radhakrishnan  <ramana.radhakrishnan@arm.com>

	PR target/86538
	* config/aarch64/aarch64-c.c (aarch64_update_cpp_builtins):
	Define __ARM_FEATURE_ATOMICS.

2019-04-30  Martin Liska  <mliska@suse.cz>

	* gimple-fold.c (gimple_fold_builtin_memory_op): Change endp
	into built_in_function enum. Remove code for endp == 2 and
	use BUILT_IN_* constants.
	(gimple_fold_builtin): Call the function with fcode.

2019-04-30  Martin Liska  <mliska@suse.cz>

	* config/i386/i386.c (ix86_builtin_reciprocal): Cast
	DECL_FUNCTION_CODE into ix86_builtins enum before
	the switch statement.

2019-04-30  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/89475
	* tree-ssa-ccp.c (evaluate_stmt): Handle BUILT_IN_BSWAP{16,32,64}
	calls.

2019-04-30  Martin Liska  <mliska@suse.cz>

	PR translation/90274
	* opts.c (print_filtered_help): Wrap string in _(...).

2019-04-30  Bin Cheng  <bin.cheng@linux.alibaba.com>

	PR tree-optimization/90240
	Revert:
	2019-04-23  Bin Cheng  <bin.cheng@linux.alibaba.com>

	PR tree-optimization/90078
	* tree-ssa-loop-ivopts.c (comp_cost::operator +,-,+=,-+,/=,*=): Add
	checks for infinite_cost overflow.

2019-04-29  Jeff Law  <law@redhat.com>

	* passes.def: Move -Wrestrict pass after copy propagation.

2019-04-29  Maya Rashish  <coypu@sdf.org>

	* config.gcc (default_gnu_indirect_function): Default to yes
	for arm*-*-netbsd*, i[34567]86-*-netbsd*, powerpc*-*-netbsd*,
	sparc*-*-netbsd*, x86_64-*-netbsd*.

2019-04-29  Vladislav Ivanishin  <vlad@ispras.ru>

	* tree-ssa-uninit.c (is_pred_expr_subset_of): Correctly handle cases
	where cond2 is NE_EXPR.
	(is_value_included_in): Update comment.

2019-04-29  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/90278
	* tree-ssa-forwprop.c (pass_forwprop::execute): Transfer/clean
	EH on comparison simplification.

2019-04-29  Jason Merrill  <jason@redhat.com>

	PR c++/82081 - tail call optimization breaks noexcept
	* tree-tailcall.c (find_tail_calls): Don't turn a call from a
	nothrow function to a might-throw function into a tail call.

2019-04-29  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-data-ref.h (data_dependence_relation::inner_loop): Delete.
	(DDR_INNER_LOOP): Likewise.
	* tree-data-ref.c (dump_data_dependence_relation): Update accordingly.
	(initialize_data_dependence_relation): Likewise.
	(insert_innermost_unit_dist_vector): Use 0 instead of DDR_INNER_LOOP.

2019-04-29  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/90257
	* cfgrtl.c (flow_active_insn_p): Return true for USE of a function
	return value.

	Revert the revert:
	2019-04-21  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/90178
	Revert:
	2018-11-21  Uros Bizjak  <ubizjak@gmail.com>

	Revert the revert:
	2013-10-26  Vladimir Makarov  <vmakarov@redhat.com>

	Revert:
	2013-10-25  Vladimir Makarov  <vmakarov@redhat.com>

	* lra-spills.c (lra_final_code_change): Remove useless move insns.

2019-04-29  Richard Biener  <rguenther@suse.de>

	* tree-ssa.c (insert_debug_temp_for_var_def): For {CLOBBER}
	rhs issue a reset.

2019-04-27  Iain Buclaw  <ibuclaw@gdcproject.org>

	* config/netbsd-d.c: Include memmodel.h.  Remove unused tree.h,
	varasm.h, and netbsd-protos.h.

2019-04-27  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/89261
	* config/i386/i386-protos.h (ix86_data_alignment): Change
	the second argument type to unsigned int.
	* config/i386/i386.c (ix86_data_alignment): Change "align"
	argument type to unsigned int.

2019-04-27  Martin Liska  <mliska@suse.cz>

	PR middle-end/90258
	* opt-suggestions.c (option_proposer::build_option_suggestions):
	When get_valid_option_values returns empty values, add the
	misspelling candidate.

2019-04-26  Jim Wilson  <jimw@sifive.com>

	* config/riscv/riscv-protos.h (riscv_move_integer): Add machine_mode
	parameter.
	* config/riscv/riscv.c (riscv_move_integer): New parameter orig_mode.
	Pass orig_mode to riscv_build_integer.
	(riscv_split_integer): Pass mode to riscv_move_integer.
	(riscv_legitimize_const_move): Likewise.
	(riscv_legitimize_move): For MEM dest and CONST_INT src case, new local
	promoted_mode.  Replace force_reg call with code to load constant into
	promoted reg and then subreg it for the store.
	* config/riscv/riscv.md (low<mode>+1): Pass <GPR:MODE>mode to
	riscv_move_integer.

2018-04-26  Eugene Sharygin  <eush@ispras.ru>

	* gdbhooks.py: Fix UnicodeDecodeErrors when printing trees with
	corrupt codes.

2019-04-26  Richard Sandiford  <richard.sandiford@arm.com>

	* tree.h (TYPE_VECTOR_SUBPARTS, SET_TYPE_VECTOR_SUBPARTS): Add
	commentary about the encoding of precision.

2019-04-25  Andreas Tobler  <andreast@gcc.gnu.org>

	* config/i386/freebsd64.h: Add bits for 32-bit multilib support.
	* config/i386/t-freebsd64: New file.
	* config.gcc: Add the t-freebsd64 for multilib support.

2019-04-25  Uroš Bizjak  <ubizjak@gmail.com>

	* doc/extend.texi (vector_size): Add missing comma after @xref.

2019-04-25  Jakub Jelinek  <jakub@redhat.com>

	* BASE-VER: Set to 10.0.0.

2019-04-25  Richard Biener  <rguenther@suse.de>

	PR middle-end/89765
	* gimplify.c (gimplify_expr): Avoid turning a lvalue
	VIEW_CONVERT_EXPR into one operating on an rvalue.

2019-04-25  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89929
	* config/i386/i386.c (feature_priority): Moved to file scope.
	(processor_features): Likewise.
	(processor_model): Likewise.
	(_arch_names_table): Likewise.
	(arch_names_table): Likewise.
	(_feature_list): Removed.
	(feature_list): Likewise.
	(_isa_names_table): Moved to file scope.  Add priority.
	(isa_names_table): Likewise.
	(get_builtin_code_for_version): Replace feature_list with
	isa_names_table.  Update error message for P_ZERO priority.

2019-04-25  Richard Biener  <rguenther@suse.de>

	* tree-pass.h (make_pass_phi_only_cprop): Remove.
	* timevar.def (TV_TREE_PHI_CPROP): Likewise.

2019-04-24  Jeff Law  <law@redhat.com>

	PR tree-optimization/90037
	* Makefile.in (OBJS): Remove tree-ssa-phionlycprop.c
	* passes.def: Replace all instance of phi-only cprop with the
	lattice propagator.  Move propagation pass from after erroneous
	path isolation to before erroneous path isolation.
	* tree-ssa-phionlycprop.c: Remove.

2019-04-24  Richard Biener  <rguenther@suse.de>

	PR middle-end/90213
	* gimple-fold.c (fold_const_aggregate_ref_1): Do multiplication
	by size and BITS_PER_UNIT on poly-wide-ints.

2019-04-25  Richard Biener  <rguenther@suse.de>

	PR middle-end/90194
	* match.pd: Add pattern to simplify view-conversion of an
	empty constructor.

2019-04-24  Clement Chigot  <clement.chigot@atos.net>

	* config/rs6000/aix71.h (SUBTARGET_OVERRIDE_OPTIONS): Disable
	OPTION_MASK_VSX and OPTION_MASK_ALTIVEC from rs6000_isa_flags
	for Go on 32 bit AIX.
	* config/rs6000/aix72.h: Likewise.

2019-04-24  Jakub Jelinek  <jakub@redhat.com>

	PR target/90193
	* rtl.c (classify_insn): Return JUMP_INSN for asm goto.
	* emit-rtl.c (try_split): Copy over REG_LABEL_TARGET.

2019-04-24  Andreas Krebbel  <krebbel@linux.ibm.com>

	PR target/89952
	* config/s390/s390.c (s390_restore_gprs_from_fprs): Restore GPRs
	from FPRs in reverse order.  Generate REG_CFA_DEF_CFA note also
	for restored hard frame pointer.
	(s390_sched_dependencies_evaluation): Implement new target hook.
	(TARGET_SCHED_DEPENDENCIES_EVALUATION_HOOK): New macro definition.

2019-04-24  Claudiu Zissulescu  <claziss@sysnopsys.com>

	* config/arc/arc-options.def: Fix typos and spelling mistakes.
	* config/arc/arc.c (arc_init): Cleanup warning message.
	(arc_override_options): Likewise.

2019-04-24  Jakub Jelinek  <jakub@redhat.com>

	PR target/90187
	* config/i386/i386.c (ix86_expand_sse_fp_minmax): Force if_true into
	a register if both if_true and if_false are MEMs.

	PR tree-optimization/90208
	* tree-cfg.c (remove_bb): Move forced labels from removed bbs
	after labels of new_bb, not before them.

	PR tree-optimization/90211
	* tree-parloops.c (try_create_reduction_list): Ignore phi arguments
	which are not SSA_NAMEs.

2018-04-23  Sudakshina Das  <sudi.das@arm.com>

	* config/aarch64/aarch64-linux.h (TARGET_ASM_FILE_END): Define for
	AArch64.
	(aarch64_file_end_indicate_exec_stack): Add gnu note section.

2019-04-23  Roman Zhuykov  <zhroma@ispras.ru>

	PR rtl-optimization/87979
	* modulo-sched.c (sms_schedule): Start ii value "mii" should
	not equal zero.

2019-04-23  Roman Zhuykov  <zhroma@ispras.ru>

	PR rtl-optimization/84032
	* modulo-sched.c (ps_insn_find_column): Change condition so that
	branch will always be the last insn in a row inside partial
	schedule.

2019-04-23  Richard Biener  <rguenther@suse.de>

	PR debug/90131
	* tree-cfgcleanup.c (move_debug_stmts_from_forwarder): Add
	dest_single_pred_p argument.
	(remove_forwarder_block): Adjust.
	(remove_forwarder_block_with_phi): Likewise.

2019-04-23  Ramana Radhakrishnan  <ramana.radhakrishnan@arm.com>
	    Bernd Edlinger  <bernd.edlinger@hotmail.de>
	    Jakub Jelinek  <jakub@redhat.com>

	PR target/89093
	* config/arm/arm.c (aapcs_vfp_is_call_or_return_candidate): Diagnose
	if used with general-regs-only.
	(arm_conditional_register_usage): Don't add non-general regs if
	general-regs-only.
	(arm_valid_target_attribute_rec): Handle general-regs-only.
	* config/arm/arm.h (TARGET_HARD_FLOAT): Return false if
	general-regs-only.
	(TARGET_HARD_FLOAT_SUB): Define.
	(TARGET_SOFT_FLOAT): Define as negation of TARGET_HARD_FLOAT_SUB.
	(TARGET_REALLY_IWMMXT): Add && !TARGET_GENERAL_REGS_ONLY.
	(TARGET_REALLY_IWMMXT2): Likewise.
	* config/arm/arm.opt: Add -mgeneral-regs-only.
	* doc/extend.texi: Document ARM general-regs-only target.
	* doc/invoke.texi: Document ARM -mgeneral-regs-only.

2019-04-23  Bin Cheng  <bin.cheng@linux.alibaba.com>

	PR tree-optimization/90078
	* tree-ssa-loop-ivopts.c (comp_cost::operator +,-,+=,-+,/=,*=): Add
	checks for infinite_cost overflow.

2019-04-23  Bin Cheng  <bin.cheng@linux.alibaba.com>

	PR tree-optimization/90021
	* tree-chrec.c (evolution_function_is_univariate_p): New parameter
	and check univariate against it.
	* tree-chrec.h (evolution_function_is_univariate_p): New parameter.
	* tree-data-ref.c (add_other_self_distances): Pass new argument.

2019-04-21  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/90178
	Revert:
	2018-11-21  Uros Bizjak  <ubizjak@gmail.com>

	Revert the revert:
	2013-10-26  Vladimir Makarov  <vmakarov@redhat.com>

	Revert:
	2013-10-25  Vladimir Makarov  <vmakarov@redhat.com>

	* lra-spills.c (lra_final_code_change): Remove useless move insns.

2019-04-21  Iain Sandoe  <iain@sandoe.co.uk>

	* config/rs6000/rs6000.md (group_end_nop): Emit insn register
	names using operand format, rather than hard-wired.
	(speculation_barrier): Likewise.

2019-04-19  Segher Boessenkool  <segher@kernel.crashing.org>

	PR tree-optimization/88055
	* tree-call-cdce.c (comparison_code_if_no_nans): New function.
	(gen_one_condition): Use it if !HONOR_NANS.

2019-04-19  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/90139
	* tree-outof-ssa.c (get_temp_reg): If reg_mode is BLKmode, return
	assign_temp instead of gen_reg_rtx.

2019-04-19  Christophe Lyon  <christophe.lyon@linaro.org>

	PR translation/90118
	* config/aarch64/aarch64.c (aarch64_override_options_internal):
	Add missing space before %<.

2019-04-18  Peter Bergner  <bergner@linux.ibm.com>

	PR rtl-optimization/87871
	* ira-lives.c (make_object_dead): Don't add conflicts to
	TOTAL_CONFLICT_HARD_REGS for register ignore_reg_for_conflicts.

2019-04-18  Martin Sebor  <msebor@redhat.com>

	PR middle-end/89797
	* tree.h (TYPE_VECTOR_SUBPARTS): Use HOST_WIDE_INT_1U.
	* config/aarch64/aarch64.c (aarch64_simd_vector_alignment): Avoid
	assuming type size fits in SHWI.

2019-04-18  Jan Hubicka  <hubicka@ucw.cz>

	PR ipa/85051
	* ipa-inline.c (flatten_function): New parameter UPDATE.
	(ipa_inline, early_inliner): Use it.

2019-04-18  Richard Sandiford  <richard.sandiford@arm.com>

	* fold-const.c (int_const_binop): Return early on failure.

2019-04-18  Richard Sandiford  <richard.sandiford@arm.com>

	PR middle-end/85164
	* combine.c (force_int_to_mode): Cast the argument rather than
	the result of known_alignment.
	* rtlanal.c (rtx_addr_can_trap_p_1): Use known_subrange_p.

2019-04-18  Richard Biener  <rguenther@suse.de>

	PR debug/90131
	* tree-cfgcleanup.c (move_debug_stmts_from_forwarder): Split
	out from ...
	(remove_forwarder_block): ... here.
	(remove_forwarder_block_with_phi): Also move debug stmts here.

2019-04-18  Jakub Jelinek  <jakub@redhat.com>

	PR translation/79183
	* gimple-ssa-sprintf.c (format_directive): Use inform_n instead of
	inform where appropriate.

2019-04-18  Richard Biener  <rguenther@suse.de>

	* tree.c (get_qualified_type): Put found type variants at the
	head of the variant list.

2018-04-17  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.c (rs6000_register_move_cost): Fix typo.

2019-04-17  Hongtao Liu  <hongtao.liu@intel.com>

	PR target/90125
	* config/i386/avx512fintrin.h (_mm_maskz_fmadd_round_sd,
	_mm_maskz_fmadd_round_ss, _mm_maskz_fmsub_round_sd,
	_mm_maskz_fmsub_round_ss, _mm_maskz_fnmadd_round_sd,
	_mm_maskz_fnmadd_round_ss, _mm_maskz_fnmsub_round_sd,
	_mm_maskz_fnmsub_round_ss): Use _maskz builtin instead of _mask3.

2019-04-17  Peter Bergner  <bergner@linux.ibm.com>

	* ira-conflicts.c (print_allocno_conflicts): Always print something,
	even for allocno's with no conflicts.
	(print_conflicts): Print an extra newline.

2019-04-17  Segher Boessenkool  <segher@kernel.crashing.org>

	* auto-inc-dec.c (attempt_change): Set the alignment of the
	temporary memory to that of the original.

2019-04-17  Joao Moreira  <jmoreira@suse.de>

	* targhooks.c (default_print_patchable_function_entry): Emit
	__patchable_function_entries section with writable flags to allow
	relocation resolution.

2019-04-17  Jonny Grant  <jg@jguk.org>

	* collect2.c (main): Change gcc.gnu.org URL to HTTPS.

2019-04-17  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/90095
	* internal-fn.c (expand_mul_overflow): Don't set SUBREG_PROMOTED_VAR_P
	on lowpart SUBREGs.

2019-04-17  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.c (arc_init): Format diagnostic string.
	(arc_override_options): Likewise.
	(check_if_valid_regno_const): Likewise.
	(arc_reorg): Likewise.

2019-04-17  Segher Boessenkool  <segher@kernel.crashing.org>

	PR target/17108
	* config/rs6000/rs6000.c (rs6000_split_multireg_move): Adjust pattern
	name.
	(rs6000_emit_allocate_stack_1): Simplify condition.  Adjust pattern
	name.
	* config/rs6000/rs6000.md (bits): Add entries for SF and DF.
	(*movdi_update1): Use Pmode.
	(movdi_<mode>_update): Fix argument to avoiding_indexed_address_p.
	(movdi_<mode>_update_stack): Rename to ...
	(movdi_update_stack): ... this.  Fix comment.  Change condition. Don't
	use Pmode.
	(*movsi_update1): Use Pmode.
	(*movsi_update2): Use Pmode.
	(movsi_update): Rename to ...
	(movsi_<mode>_update): ... this.  Use Pmode.
	(movsi_update_stack): Fix condition.
	(*movhi_update1): Use Pmode.  Fix argument to
	avoiding_indexed_address_p.
	(*movhi_update2): Ditto.
	(*movhi_update3): Ditto.
	(*movhi_update4): Ditto.
	(*movqi_update1): Ditto.
	(*movqi_update2): Ditto.
	(*movqi_update3): Ditto.
	(*movsf_update1, *movdf_update1): Merge, rename to...
	(*mov<mode>_update1): This.  Use Pmode.  Fix argument to
	avoiding_indexed_address_p.  Add "size" attribute.
	(*movsf_update2, *movdf_update2): Merge, rename to...
	(*mov<mode>_update2): This.  Ditto.
	(*movsf_update3): Use Pmode.  Fix argument to
	avoiding_indexed_address_p.
	(*movsf_update4): Ditto.
	(allocate_stack): Simplify condition.  Adjust pattern names.

2019-04-17  Jakub Jelinek  <jakub@redhat.com>

	PR target/89093
	* config/arm/arm.c (arm_valid_target_attribute_rec): Don't skip
	whitespace at the start of target attribute string.

2019-04-16  Pat Haugen  <pthaugen@us.ibm.com>

	PR target/84369
	* config/rs6000/power9.md: Add store forwarding bypass.

2019-04-16  Alexandre Oliva  <aoliva@redhat.com>

	PR debug/89528
	* valtrack.c (dead_debug_insert_temp): Reset debug references
	to the return value of a call being removed.

2019-04-16  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc-protos.h (arc_register_move_cost): Remove.
	* config/arc/arc.c (arc_register_move_cost): Re-purpose it to
	implement target hook.
	(arc_memory_move_cost): New function.
	(TARGET_REGISTER_MOVE_COST): Define.
	(TARGET_MEMORY_MOVE_COST): Likewise.
	* config/arc/arc.h (REGISTER_MOVE_COST): Remove.
	(MEMORY_MOVE_COST): Likewise.

2019-04-16  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.md (sibcall_insn): Use Rcd constraint.
	(sibcall_value_insn): Likewise.
	* config/arc/constraints.md (Rs5): Remove.

2019-04-16  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.c (arc_hard_regno_modes): Add two missing modes
	for last two fake registers.
	(arc_conditional_register_usage): Make sure fake frame and arg
	pointer regs are in general regs class.
	(FRAME_POINTER_MASK): Remove.
	(RETURN_ADDR_MASK): Remove.
	(arc_must_save_register): Use hard frame regnum.
	(frame_restore_reg): Use hard_frame_pointer_rtx.
	(arc_save_callee_saves): Likewise.
	(arc_restore_callee_saves): Likewise.
	(arc_save_callee_enter): Likewise.
	(arc_restore_callee_leave): Likewise.
	(arc_save_callee_milli): Likewise.
	(arc_eh_return_address_location): Likewise.
	(arc_check_multi): Use hard frame regnum.
	(arc_can_eliminate): Likewise.
	* config/arc/arc.h (FIXED_REGISTERS): Make FP register available
	for register allocator.
	(REG_CLASS_CONTENTS): Update GENERAL_REGS.
	(REGNO_OK_FOR_BASE_P): Consider FRAME_POINTER_REGNUM.
	(FRAME_POINTER_REGNUM): Change it to a fake register.
	(HARD_FRAME_POINTER_REGNUM): Defined.
	(ARG_POINTER_REGNUM): Change it to a new fake register.
	(ELIMINABLE_REGS): Update.
	(REGISTER_NAMES): Update names.
	* config/arc/arc.md (LP_START): Remove.
	(LP_END): Likewise.
	(shift_si3_loop): Update pattern.

2019-04-16  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.c (arc_expand_prologue): Emit blockage regardless
	to avoid delay slot scheduling.
	(arc_must_save_register): Don't save SP.
	* config/arc/arc.md (stack_tie): Remove.
	(UNSPEC_ARC_STKTIE): Likewise.

2019-04-16  Kito Cheng  <kito.cheng@gmail.com>
	    Shiva Chen  <shiva0217@gmail.com>

	* config/nds32/nds32-md-auxiliary.c (nds32_split_ashiftdi3): Fix wrong
	code gen with large shift amount.

2019-04-16  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32-pipelines-auxiliary.c (wext_odd_dep_p): Handle
	subreg.

2019-04-16  Jakub Jelinek  <jakub@redhat.com>

	PR target/90096
	* config/i386/i386.c (ix86_target_string): Add ADD_ABI_P argument, only
	print -m64/-mx32/-m32 if it is true.
	(ix86_debug_options, ix86_function_specific_print): Pass true as
	ADD_ABI_P to ix86_target_string.
	(ix86_expand_builtin): Adjust ix86_target_string caller, pass true as
	ADD_ABI_P only if OPTION_MASK_ISA_64BIT is set in bisa and in that case
	or into it OPTION_MASK_ISA_ABI_64 or OPTION_MASK_ISA_ABI_X32.

	PR rtl-optimization/90082
	* dce.c (can_delete_call): New function.
	(deletable_insn_p, mark_insn): Use it.

	PR tree-optimization/90090
	* tree-ssa-math-opts.c (is_division_by): Ignore divisions that can
	throw internally.
	(is_division_by_square): Likewise.  Formatting fix.

2019-04-16  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/56049
	* tree-ssa-loop-im.c (mem_ref_hasher::equal): Elide alias-set
	equality check if alias-set zero will prevail.

2019-04-15  Jeff Law  <law@redhat.com>

	* config/microblaze/microblaze.c (microblaze_expand_block_move): Treat
	size and alignment as unsigned.

2019-04-15  Richard Biener  <rguenther@suse.de>

	PR debug/90074
	* tree-loop-distribution.c (destroy_loop): Preserve correct
	debug info.

2019-04-15  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/90071
	* tree-ssa-reassoc.c (init_range_entry): Do not pick up
	abnormal operands from def stmts.

2019-04-15  Segher Boessenkool  <segher@kernel.crashing.org>

	PR rtl-optimization/89794
	* combine.c (count_auto_inc): New function.
	(try_combine): Count how many auto_inc expressions there were in the
	original instructions.  Ensure we have the same number in the new
	instructions.  Remove the code that tried to ensure auto_inc side
	effects on i1 and i0 are not lost.

2019-04-15  Richard Biener  <rguenther@suse.de>

	PR ipa/88936
	* tree.h (auto_var_p): Declare.
	* tree.c (auto_var_p): New function, split out from ...
	(auto_var_in_fn_p): ... here.
	* tree-ssa-structalias.c (struct variable_info): Add shadow_var_uid
	member.
	(new_var_info): Initialize it.
	(set_uids_in_ptset): Also set the shadow variable uid if required.
	(ipa_pta_execute): Postprocess points-to solutions assigning
	shadow variable uids for locals that may reach their containing
	function recursively.
	* tree-ssa-ccp.c (fold_builtin_alloca_with_align): Do not
	assert but instead check whether the points-to solution is
	a singleton.

2019-04-15  Martin Jambor  <mjambor@suse.cz>

	PR ipa/pr89693
	* cgraph.c (clone_of_p): Loop over clone chain for each step in
	the thunk chain.

2019-04-15  Monk Chiang  <sh.chiang04@gmail.com>

	* config.gcc (nds32*-*-linux*): Set gcc_cv_initfini_array to yes.

2019-04-15  Monk Chiang  <sh.chiang04@gmail.com>
	    Kito Cheng  <kito.cheng@gmail.com>
	    Shiva Chen  <shiva0217@gmail.com>

	* config/nds32/nds32-md-auxiliary.c
	(nds32_legitimize_pic_address): Use new PIC pattern.
	(nds32_legitimize_tls_address): Use new TLS pattern.
	(nds32_output_symrel): New.
	* config/nds32/nds32-protos.h (nds32_output_symrel): Declare.
	(nds32_alloc_relax_group_id): Ditto.
	* config/nds32/nds32-relax-opt.c (nds32_alloc_relax_group_id): New.
	(nds32_group_insns): Use nds32_alloc_relax_group_id instead of use
	relax_group_id.
	(nds32_group_tls_insn): Ditto.
	(nds32_group_float_insns): Ditto.
	* config/nds32/nds32.md (tls_le): New.
	(sym_got): Ditto.

2019-04-15  Chung-Ju Wu  <jasonwucj@gmail.com>

	* configure: Add nds32 target for dwarf2 debug_line checking.
	* configure.ac: Regenerated.

2019-04-14  Jan Hubicka  <hubicka@ucw.cz>

	PR lto/89358
	* ipa-devirt.c (skip_in_fields_list_p): New.
	(odr_types_equivalent_p): Use it.

2019-04-13  Jakub Jelinek  <jakub@redhat.com>

	PR target/89093
	* config/arm/arm.c (arm_valid_target_attribute_rec): Use strcmp
	instead of strncmp when checking for thumb and arm.  Formatting fixes.

2019-04-12  Iain Buclaw  <ibuclaw@gdcproject.org>

	* doc/install.texi: Document --with-target-system-zlib.

2019-04-12  Martin Sebor  <msebor@redhat.com>

	PR c/88383
	PR c/89288
	PR c/89798
	PR c/89797
	* targhooks.c (default_vector_alignment): Avoid assuming
	argument fits in SHWI.
	* tree.h (TYPE_VECTOR_SUBPARTS): Avoid sign overflow in
	a shift expression.
	* doc/extend.texi (__builtin_has_attribute): Add a clarifying note.

2019-04-12  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/89965
	* dce.c: Include rtl-iter.h.
	(struct check_argument_load_data): New type.
	(check_argument_load): New function.
	(find_call_stack_args): Check for loads from stack slots still tracked
	in sp_bytes and punt if any is found.

	* config/mips/loongson-mmiintrin.h: Fix up #error message.

2019-04-12  Jan Hubicka  <hubicka@ucw.cz>

	* params.def (PARAM_MAX_LTO_STREAMING_PARALLELISM): New parameter.
	* doc/invoke.texi (max-lto-streaming-paralellism): New --param.

2019-04-12  Martin Liska  <mliska@suse.cz>

	PR middle-end/89970
	* multiple_target.c (create_dispatcher_calls): Wrap ifunc
	in error message.
	(separate_attrs): Handle multiple 'default's.
	(expand_target_clones): Rework error handling code.

2019-04-12  Kelvin Nilsen  <kelvin@gcc.gnu.org>

	PR target/87532
	* config/rs6000/rs6000.c (rs6000_split_vec_extract_var): Use inner
	mode of vector rather than mode of destination for move instruction.
	* config/rs6000/vsx.md (*vsx_extract_<mode>_<VS_scalar>mode_var):
	Use QI inner mode with V16QI vector mode.

2019-04-12  Jakub Jelinek  <jakub@redhat.com>

	PR target/52726
	* config/tilepro/tilepro.c (tilepro_print_operand): Use just
	"invalid %%t operand" in output_operand_lossage message.

2019-04-12  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/predicates.md (permute_pattern_operand): New
	predicate.
	* config/s390/vector.md ("*vec_splats_bswap_vec<mode>"): Add USE
	operand for the permute pattern.
	("*vec_perm<mode>"): New insn definition.
	("bswap<mode>"): Generate the permute pattern operand in the
	expander and perform the operand reloads for pre arch13 level
	already.
	("*bswap<mode>_emu"): Rename to ...
	("*bswap<mode>"): ... this. And make the splitter vxe2 only.
	* config/s390/vx-builtins.md ("*vec_insert_and_zero_bswap<mode>"):
	Add the USE operand for the permute pattern.
	("*vec_set_bswap_vec<mode>"): Likewise.

2019-04-12  Jakub Jelinek  <jakub@redhat.com>

	PR c/89946
	* varasm.c (assemble_start_function): Don't use tree_fits_uhwi_p
	and gcc_unreachable if it fails, just call tree_to_uhwi which
	verifies that too.  Test TREE_CHAIN instead of list_length > 1.
	Start warning message with a lower-case letter.  Formatting fixes.

	PR rtl-optimization/90026
	* cfgcleanup.c (try_optimize_cfg): When removing empty bb with no
	successors, look for BARRIERs inside of the whole BB_FOOTER chain
	rather than just at the start of it.  If e->src BB_FOOTER is not NULL
	in cfglayout mode, use emit_barrier_after_bb.

2018-04-11  Steve Ellcey  <sellcey@marvell.com>

	PR rtl-optimization/87763
	* config/aarch64/aarch64.md (*aarch64_bfi<GPI:mode>4_noshift_alt):
	New Instruction.

2019-04-11  Tom de Vries  <tdevries@suse.de>

	* doc/extend.texi (@node Statement Exprs): Note variable shadowing at
	max macro using statement expression.

2019-04-11  David Edelsohn  <dje.gcc@gmail.com>

	* xcoffout.h (xcoff_private_rodata_section_name): Declare.
	* xcoffout.c (xcoff_private_rodata_section_name): Define.
	* config/rs6000/rs6000.c (rs6000_xcoff_asm_init_sections): Create
	read_only_private_data_section using xcoff_private_rodata_section_name.
	(rs6000_xcoff_file_start): Generate xcoff_private_rodata_section_name.

2019-04-11  Christophe Lyon  <christophe.lyon@linaro.org>

	PR target/90016
	* config/aarch64/aarch64.opt (msve-vector-bits): Add missing final '.'.

2019-04-11  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/89965
	* dce.c (sp_based_mem_offset): New function.
	(find_call_stack_args): Use sp_based_mem_offset.

2019-04-11  Jonathan Wakely  <jwakely@redhat.com>

	* doc/invoke.texi (Optimize Options): Clarify -flive-patching docs.

2019-04-11  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/90020
	* tree-ssa-sccvn.c (vn_reference_may_trap): New function.
	* tree-ssa-sccvn.h (vn_reference_may_trap): Declare.
	* tree-ssa-pre.c (compute_avail): Use it to not put
	possibly trapping references after a call that might not
	return into EXP_GEN.
	* gcse.c (compute_hash_table_work): Do not elide
	marking a block containing a call if the call might not
	return.

2019-04-11  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/90018
	* tree-vect-data-refs.c (vect_preserves_scalar_order_p):
	Test both SLP and interleaving variants.

2019-04-11  Robin Dapp  <rdapp@linux.ibm.com>

	* config/s390/8561.md: New file.
	* config/s390/driver-native.c (s390_host_detect_local_cpu):
	Add arch13 cpu model.
	* config/s390/s390-opts.h (enum processor_type): Likewise.
	* config/s390/s390.c (s390_get_sched_attrmask): Add arch13.
	(s390_get_unit_mask): Likewise.
	(s390_is_fpd): Likewise.
	(s390_is_fxd): Likewise.
	* config/s390/s390.h (s390_tune_attr): Likewise.
	* config/s390/s390.md: Include arch13 pipeline description.
	* config/s390/s390.opt: Add arch13.

2018-04-10  Steve Ellcey  <sellcey@marvell.com>

	PR rtl-optimization/87763
	* config/aarch64/aarch64-protos.h (aarch64_masks_and_shift_for_bfi_p):
	New prototype.
	* config/aarch64/aarch64.c (aarch64_masks_and_shift_for_bfi_p):
	New function.
	* config/aarch64/aarch64.md (*aarch64_bfi<GPI:mode>5_shift):
	New instruction.
	(*aarch64_bfi<GPI:mode>5_shift_alt): Ditto.
	(*aarch64_bfi<GPI:mode>4_noand): Ditto.
	(*aarch64_bfi<GPI:mode>4_noand_alt): Ditto.
	(*aarch64_bfi<GPI:mode>4_noshift): Ditto.

2019-04-10  Jonathan Wakely  <jwakely@redhat.com>

	* doc/invoke.texi (Optimize Options): Change "Nevertheless" to
	"Although" in -fipa-icf documentation.

	* doc/invoke.texi (Debugging Options): Explicitly state the semantics
	of using multiple -g options.

2019-04-10  Martin Liska  <mliska@suse.cz>

	PR gcov-profile/89959
	* doc/gcov.texi: Make documentation of -x option
	more precise.

2019-04-10  Richard Biener  <rguenther@suse.de>

	* tree-vectorizer.h (_stmt_vec_info): Remove same_dr_stmt
	member.
	(DR_GROUP_SAME_DR_STMT): Remove.
	* tree-vect-stmts.c (vectorizable_load): Remove unreachable code.
	* tree-vect-data-refs.c (vect_analyze_group_access_1): Likewise,
	replace with assert.
	(vect_analyze_data_ref_accesses): Fix INTEGER_CST comparison.
	(vect_record_grouped_load_vectors): Remove unreachable code.

2019-04-10  Richard Earnshaw  <rearnsha@arm.com>

	PR target/90016
	* config/aarch64/aarch64.opt (msve-vector-bits): Remove redundant and
	obsolete reference to N.

2019-04-10  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/90025
	* expr.c (store_expr): Set properly size on the MEM passed to
	clear_storage.

	PR c++/90010
	* gimple-ssa-sprintf.c (target_to_host): Fix handling of targstr
	with strlen in between hostsz-3 and hostsz-1 inclusive when no
	translation is needed, and when translation is needed, only append
	... if the string length is hostsz or more bytes long.  Avoid using
	strncpy or strcat.

2019-04-09  Matthew Malcomson  <matthew.malcomson@arm.com>

	PR target/90024
	* config/arm/arm.c (neon_valid_immediate): Disallow VOIDmode parameter.
	* config/arm/constraints.md (Dm, DN, Dn): Split previous Dn constraint
	into three.
	* config/arm/neon.md (*neon_mov<mode>): Account for TImode and DImode
	differences directly.
	(*smax<mode>3_neon, vashl<mode>3, vashr<mode>3_imm): Use Dm constraint.

2019-04-09  Jakub Jelinek  <jakub@redhat.com>

	PR translation/90011
	* ipa-devirt.c (compare_virtual_tables): Remove two trailing spaces
	from diagnostics.
	* config/arm/freebsd.h (LINK_SPEC): Remove trailing space from -p
	diagnostics.
	* config/riscv/freebsd.h (LINK_SPEC): Likewise.
	* config/aarch64/aarch64-freebsd.h (FBSD_TARGET_LINK_SPEC): Likewise.
	* config/darwin.h (DRIVER_SELF_SPECS, ASM_FINAL_SPEC): Remove
	trailing space from -gsplit-dwarf diagnostics.

	PR tree-optimization/89998
	* gimple-ssa-sprintf.c (try_substitute_return_value): Use lhs type
	instead of integer_type_node if possible, don't add ranges if return
	type is not compatible with int.
	* gimple-fold.c (gimple_fold_builtin_sprintf,
	gimple_fold_builtin_snprintf): Use lhs type instead of hardcoded
	integer_type_node.

2019-04-09  Martin Liska  <mliska@suse.cz>

	* Makefile.in: Use GENERATOR_CFLAGS for all generators.
	* doc/install.texi: Document the new config.

2019-04-09  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-data-refs.c (vect_get_smallest_scalar_type): Always
	use gimple_expr_type for load and store calls.  Skip over the
	condition argument in a conditional internal function.
	Protect use of TREE_INT_CST_LOW.

2019-04-09  Jakub Jelinek  <jakub@redhat.com>

	PR target/90015
	* config/riscv/riscv.c (riscv_get_interrupt_type): Fix comment typo.
	(riscv_merge_decl_attributes): Fix typo in diagnostics.  Remove
	trailing period from it too.

2019-04-08  wu yuan  <wuyuan5@huawei.com>

	* config/aarch64/aarch64-cores.def (tsv1100): Change scheduling model.
	* config/aarch64/aarch64.md : Add "tsv110.md"
	* config/aarch64/tsv110.md: New file.

2019-04-08  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/90006
	* tree-vect-data-refs.c (vect_get_smallest_scalar_type): Handle
	calls like lrint.

2019-04-08  Andrea Corallo  <andrea.corallo@arm.com>

	PR target/83033
	* config/aarch64/cortex-a57-fma-steering.c (fma_forest): Prohibit copy
	construction.
	(fma_root_node): Likewise.
	(func_fma_steering): Likewise.

2019-04-08  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/89865
	* config/i386/i386.md: Add peepholes for z = x; x ^= y; x != z.

	PR rtl-optimization/89865
	* config/i386/i386.md
	(SWI12 peephole for mem {+,-,&,|,^}= x; mem != 0): Fix up operand
	numbers not to clash with the additional operands[4].
	(peepholes for mem {+,-,&,|,^}= x; mem != 0): New peephole2s
	with extra register copy in the middle.

2019-04-08  Martin Liska  <mliska@suse.cz>

	PR gcov-profile/89961
	* doc/gcov.texi: Document data_file.
	* gcov.c (generate_results): Add data_info into JSON output.

2019-04-01  Bin Cheng  <bin.cheng@linux.alibaba.com>

	PR tree-optimization/89725
	* tree-chrec.c (chrec_contains_symbols): New parameter.  Handle outer
	loop's chrec as invariant symbol.
	* tree-chrec.h (chrec_contains_symbols): New parameter.
	* tree-data-ref.c (analyze_miv_subscript): Pass new argument.
	(build_classic_dist_vector_1, add_other_self_distances): Bypass access
	function of loops not in DDR's loop_nest.
	* tree-data-ref.h (index_in_loop_nest): Add unreachable check.

2019-04-08  Chenghua Xu  <paul.hua.gm@gmail.com>

	PR target/89623
	* config/mips/mips.opt (LOONGSON_EXT2): Use Var instead of
	Mask.

2019-04-07  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/89945
	* config/i386/i386.md (anddi_1 to andsi_1_zext splitter):
	Avoid calling gen_lowpart with SYMBOL_REF and LABEL_REF operand.

2019-04-05  Joern Rennecke  <joern.rennecke@embecosm.com>

	* sched-deps.c (sched_macro_fuse_insns): Check return value of
	targetm.fixed_condition_code_regs.

2019-04-05  Richard Biener  <rguenther@suse.de>

	PR debug/89892
	PR debug/89905
	* tree-cfgcleanup.c (remove_forwarder_block): Always move
	debug bind stmts but reset them if they are not valid at the
	destination.

2019-04-05  Martin Liska  <mliska@suse.cz>

	PR translation/89936
	* collect-utils.c (collect_execute): Use %< and %>, or %qs in
	order to wrap keywords or arguments.
	* collect2.c (main): Likewise.
	(scan_prog_file): Likewise.
	(scan_libraries): Likewise.
	* common/config/riscv/riscv-common.c
	(riscv_subset_list::parsing_subset_version): Likewise.
	(riscv_subset_list::parse_std_ext): Likewise.
	* config/aarch64/aarch64.c (aarch64_override_options_internal):
	Likewise.
	* config/arm/arm.c (arm_option_override): Likewise.
	* config/cris/cris.c (cris_print_operand): Likewise.
	* config/darwin-c.c (darwin_pragma_options): Likewise.
	(darwin_pragma_unused): Likewise.
	(darwin_pragma_ms_struct): Likewise.
	* config/ft32/ft32.c (ft32_print_operand): Likewise.
	* config/i386/i386.c (print_reg): Likewise.
	(ix86_print_operand): Likewise.
	* config/i386/xm-djgpp.h: Likewise.
	* config/iq2000/iq2000.c (iq2000_print_operand): Likewise.
	* config/m32c/m32c.c (m32c_option_override): Likewise.
	* config/msp430/msp430.c (msp430_option_override): Likewise.
	* config/nds32/nds32.c (nds32_option_override): Likewise.
	* config/nvptx/mkoffload.c (main): Likewise.
	* config/rx/rx.c (rx_print_operand): Likewise.
	(valid_psw_flag): Likewise.
	* config/vms/vms-c.c (vms_pragma_member_alignment): Likewise.
	(vms_pragma_nomember_alignment): Likewise.
	(vms_pragma_extern_model): Likewise.
	* lto-wrapper.c (compile_offload_image): Likewise.
	* omp-offload.c (oacc_parse_default_dims): Likewise.
	* symtab.c (symtab_node::verify_base): Likewise.
	* tlink.c (recompile_files): Likewise.
	(start_tweaking): Likewise.
	* tree-profile.c (parse_profile_filter): Likewise.

2019-04-05  Richard Sandiford  <richard.sandiford@arm.com>

	PR tree-optimization/89956
	* tree-ssa-math-opts.c (convert_mult_to_fma): Protect against
	multiple negates of the same value.

2019-04-04  Martin Sebor  <msebor@redhat.com>

	PR middle-end/89957
	PR middle-end/89911
	* builtins.c (expand_builtin_strnlen): Make sure wi::ltu_p operands
	have the same precision since the function crashes otherwise.
	* calls.c (maybe_warn_nonstring_arg): Avoid assuming strnlen() call
	has non-zero arguments.

2019-04-04  Martin Sebor  <msebor@redhat.com>

	PR middle-end/89934
	* gimple-ssa-warn-restrict.c (builtin_access::builtin_access): Bail
	out if the number of arguments is less than expected.

2019-04-04  Jeff Law  <law@redhat.com>

	PR rtl-optimization/89399
	* ree.c (combine_set_extension): Use single_set rather than
	digging into PATTERN for items on the candidate list.
	(combine_reaching_defs): Likewise.

2019-04-04  Richard Sandiford  <richard.sandiford@arm.com>

	PR rtl-optimization/46590
	* loop-invariant.c (find_defs): Move df_remove_problem and
	df_process_deferred_rescans to move_invariants.
	Move df_live_add_problem and df_live_set_all_dirty calls
	to move_invariants.
	(move_invariants): Likewise.
	(move_loop_invariants): Likewise, making the df_live calls
	conditional on -O.  Remove the problem again if we added it
	locally.

2019-04-03  qing zhao  <qing.zhao@oracle.com>

	PR tree-optimization/89730
	* ipa-inline.c (can_inline_edge_p): Delete the checking for
	-flive-patching=inline-only-static.
	(can_inline_edge_by_limits_p): Add the checking for
	-flive-patching=inline-only-static and grant always_inline
	even when -flive-patching=inline-only-static is specified.

2019-04-03  Jeff Law  <law@redhat.com>

	PR rtl-optimization/81025
	* reorg.c (skip_consecutive_labels): Do not skip past a BARRIER.

2019-04-03  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84101
	* tree-vect-stmts.c: Include explow.h for hard_function_value,
	regs.h for hard_regno_nregs.
	(cfun_returns): New helper.
	(vect_model_store_cost): When vectorizing a store to a decl
	we return and the function ABI returns in a multi-reg location
	account for the possible spilling that will happen.

2019-04-03  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/s390.c (s390_legitimate_address_p): Reject long
	displacement addresses for vector mode operands.

2019-04-03  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.c (GMASK_LEN): Define.
	(arc_restore_callee_saves): Restore first blink when
	!optimize_size.

2019-04-03  Sudakshina Das  <sudi.das@arm.com>

	* doc/extend.texi: Add deprecated comment on sign-return-address
	function attribute and add mbranch-protection.
	* doc/invoke.texi: Add bti to the options for mbranch-protection.

2019-04-03  Richard Biener  <rguenther@suse.de>

	PR lto/89896
	* lto-wrapper.c (run_gcc): Avoid implicit rules making
	the all target phony.

2019-04-02  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/89902
	PR target/89903
	* config/i386/i386.c (dimode_scalar_to_vector_candidate_p):
	Return false for variable DImode shifts.
	(dimode_scalar_chain::compute_convert_gain): Do not handle
	register count operand in variable DImode shifts.
	(dimode_scalar_chain::make_vector_copies): Remove support to copy
	count argument of a variable shift instruction to a vector register.
	(dimode_scalar_chain::convert_reg): Remove support to convert
	count argument of a variable shift instruction.

2019-04-02  Andrey Belevantsev  <abel@ispras.ru>

	PR rtl-optimization/84206
	* sel-sched-ir.h (get_all_loop_exits): Avoid the outer loop when
	iterating over loop headers.

2019-04-02  Andrey Belevantsev  <abel@ispras.ru>

	PR rtl-optimization/85876
	* sel-sched.c (code_motion_path_driver): Avoid unwinding first_insn
	beyond the original fence.

2019-04-02  Ulrich Weigand  <uweigand@de.ibm.com>

	* config.gcc: Mark spu* targets as deprecated/obsolete.

2019-04-02  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/s390-builtin-types.def: New builtin function type
	definitions. Remove unused types.
	* config/s390/s390-builtins.def (s390_vcdgb, s390_vcdlgb)
	(s390_vcgdb, s390_vclgdb): Remove low-level builtin definitions.
	(s390_vec_float, s390_vec_signed, s390_vec_unsigned): New
	overloaded builtins.
	(s390_vcefb, s390_vcdgb, s390_vcelfb, s390_vcdlgb, s390_vcfeb)
	(s390_vcgdb, s390_vclfeb, s390_vclgdb): New low-level builtins.
	* config/s390/vecintrin.h (vec_float): New builtin macro definition.
	(vec_double, vec_signed, vec_unsigned): Define to use the new
	overloaded builtins.
	* config/s390/vx-builtins.md ("vec_double_s64", "vec_double_u64"):
	Remove expanders.

2019-04-02  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/s390-builtin-types.def: New builtin function type
	definitions.
	* config/s390/s390-builtins.def (s390_vec_search_string_cc)
	(s390_vec_search_string_until_zero_cc): New overloaded builtins.
	(s390_vstrsb, s390_vstrsh, s390_vstrsf, s390_vstrszb)
	(s390_vstrszh, s390_vstrszf): New low-level builtins.
	* config/s390/s390.md (UNSPEC_VEC_VSTRS, UNSPEC_VEC_VSTRSCC): New
	constant definitions.
	* config/s390/vecintrin.h (vec_search_string_cc)
	(vec_search_string_until_zero_cc): New builtin name definitions.
	* config/s390/vx-builtins.md ("vstrs<mode>", "vstrsz<mode>"): New
	expanders.
	("vec_vstrs<mode>"): New insn definition.

2019-04-02  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/s390-builtin-types.def: Add new builtin function
	types.
	* config/s390/s390-builtins.def (s390_vec_sldb, s390_vec_srdb):
	New overloaded builtins.
	(s390_vec_sldb, s390_vec_srdb): New low-level builtins.  and
	s390_vsrd.
	* config/s390/s390.md (UNSPEC_VEC_SLDB): Rename to ...
	(UNSPEC_VEC_SLDBYTE): ... this.
	(UNSPEC_VEC_SLDBIT, UNSPEC_VEC_SRDBIT): New constant definitions.
	* config/s390/vecintrin.h (vec_sldb, vec_srdb): New builtin name
	definitions.
	* config/s390/vx-builtins.md ("vec_sld<mode>", "vec_sldw<mode>"):
	Rename UNSPEC_VEC_SLDB to UNSPEC_VEC_SLDBYTE.
	("vec_sldb<mode>", "vec_srdb<mode>"): New insn definitions.

2019-04-02  Andreas Krebbel  <krebbel@linux.ibm.com>

	("*vec_splats_bswap_vec<mode>", "*vec_splats_bswap_elem<mode>"):
	New insn definition.
	* config/s390/vx-builtins.md (V_HW_HSD): Move to ...
	* config/s390/vector.md (V_HW_HSD): ... here.

2019-04-02  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/vecintrin.h: Map vec_vster low-level builtins to vec_vler.
	* config/s390/vx-builtins.md ("*vec_insert_and_zero_bswap<mode>")
	("*vec_set_bswap_elem<mode>", "*vec_set_bswap_vec<mode>")
	("*vec_extract_bswap_vec<mode>", "*vec_extract_bswap_elem<mode>"):
	New insn definitions.

2019-04-02  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/s390-builtin-types.def: Add new builtin function type.
	* config/s390/s390-builtins.def: Add overloaded builtin
	s390_vec_reve and low-level builtins for s390_vler and s390_vster.
	* config/s390/s390.md (UNSPEC_VEC_ELTSWAP): New constant definition.
	* config/s390/vecintrin.h (vec_reve): New builtin name definition.
	* config/s390/vx-builtins.md (V_HW_HSD): New mode iterator.
	("eltswap<mode>"): New expander.
	("*eltswapv16qi", "*eltswap<mode>", "*eltswap<mode>_emu"): New
	insn definitions.

2019-04-02  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/s390-builtin-types.def: Add new builtin function types.
	* config/s390/s390-builtins.def: Add overloaded builtin
	s390_vec_revb. Add low-level builtins for vlbr and vstbr
	instructions.
	* config/s390/vecintrin.h (vec_revb): New builtin name definition.
	* config/s390/vector.md (VT_HW_HSDT): New mode iterator.
	("bswap<mode>"): New expander.
	("*bswap<mode>", "*bswap<mode>_emu"): New insn definitions.

2019-04-02  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/s390-builtins.def (B_VXE2): New builtin flag definition.
	* config/s390/s390-c.c (s390_cpu_cpp_builtins_internal): Increment
	vector builtin version number in __VEC__.

2019-04-02  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/s390.md (VX_CONV_BFP, VX_CONV_INT): New mode
	iterators.
	(SFSI): New mode attribute.
	("*fixuns_truncdfdi2_vx", "*fix_truncdfdi2_bfp_z13")
	("*floatunsdidf2_z13", ): Add support for 32 bit conversions and
	rename to ...
	("*fixuns_trunc<VX_CONV_BFP:mode><VX_CONV_INT:mode>2_z13")
	("*fix_trunc<VX_CONV_BFP:mode><VX_CONV_INT:mode>2_bfp_z13")
	("*floatuns<VX_CONV_INT:mode><VX_CONV_BFP:mode>2_z13"): ... these.
	("floatsi<mode>2"): Add wcefb instruction.

2019-04-02  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/s390.md ("xde"): Extend mode attribute to vector types.
	* config/s390/vector.md (VX_VEC_CONV_BFP, VX_VEC_CONV_INT): New
	mode iterators.
	("floatv2div2df2", "floatunsv2div2df2", "fix_truncv2dfv2di2")
	("fixuns_truncv2dfv2di2"): Enhance with mode iterator to also
	support 32 bit fp-int conversions. Rename to ...
	("float<VX_VEC_CONV_INT:mode><VX_VEC_CONV_BFP:mode>2")
	("floatuns<VX_VEC_CONV_INT:mode><VX_VEC_CONV_BFP:mode>2")
	("fix_trunc<VX_VEC_CONV_BFP:mode><VX_VEC_CONV_INT:mode>2")
	("fixuns_trunc<VX_VEC_CONV_BFP:mode><VX_VEC_CONV_INT:mode>2"):
	... to these.

2019-04-02  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/s390.c (s390_rtx_costs): Do not add extra costs for
	if-then-else constructs if we can use the select instruction.
	* config/s390/s390.md ("*mov<mode>cc"): Add the new instructions.

2019-04-02  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/s390.md ("*popcountdi_arch13_cc")
	("*popcountdi_arch13_cconly", "*popcountdi_arch13"): New insn
	definition.
	("*popcount<mode>", "popcountdi2", "popcountsi2", "popcounthi2"):
	Append _z196 to make it ...
	("*popcount<mode>_z196", "popcountdi2_z196", "popcountsi2_z196")
	("popcounthi2_z196"): ... this.
	("popcountdi2_z196"): Remove TARGET_64BIT from the insn condition.
	("popcountdi2", "popcountsi2", "popcounthi2"): New expanders.

2019-04-02  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/s390.c (s390_canonicalize_comparison): Convert
	certain compares for arch13 in order to make use of the condition
	code result produced by the new instructions.
	(s390_rtx_costs): Adjust the costs for nnrk, nngrk, nork, nogrk,
	nxrk, and nxgrk instruction patterns.
	* config/s390/s390.md (ANDOR, bitops_name, inv_bitops_name)
	(inv_no): Add new code iterator together with some attributes.
	("*andc_split_<mode>"): Disable splitter for arch13.
	("*<ANDOR:bitops_name>c<GPR:mode>_cc")
	("*<ANDOR:bitops_name>c<GPR:mode>_cconly")
	("*<ANDOR:bitops_name>c<GPR:mode>")
	("*n<ANDOR:inv_bitops_name><GPR:mode>_cc")
	("*n<ANDOR:inv_bitops_name><mode>_cconly")
	("*n<ANDOR:inv_bitops_name><mode>", "*nxor<GPR:mode>_cc")
	("*nxor<mode>_cconly", "*nxor<mode>"): New insn definitions.

2019-04-02  Andreas Krebbel  <krebbel@linux.ibm.com>

	* common/config/s390/s390-common.c (processor_flags_table): New
	entry for arch13.
	* config.gcc: Support arch13 with the --with-arch= configure flag.
	* config/s390/driver-native.c (s390_host_detect_local_cpu):
	* config/s390/s390-opts.h (enum processor_type): Add PROCESSOR_ARCH13.
	* config/s390/s390.c (s390_get_sched_attrmask)
	(s390_get_unit_mask): Add PROCESSOR_ARCH13.
	* config/s390/s390.h (enum processor_flags): Add PF_VXE2 and PF_ARCH13.
	* config/s390/s390.md (TARGET_CPU_ARCH13, TARGET_CPU_ARCH13_P)
	(TARGET_CPU_VXE2, TARGET_CPU_VXE2_P, TARGET_ARCH13)
	(TARGET_ARCH13_P, TARGET_VXE2, TARGET_VXE2_P): New macro
	definitions.
	* config/s390/s390.opt: Support arch13 as processor type in
	command line options.

2019-04-02  Martin Liska  <mliska@suse.cz>

	PR translation/89912
	* params.def (PARAM_GRAPHITE_MAX_ARRAYS_PER_SCOP):
	Fix param description of graphite-max-arrays-per-scop.

2019-04-02  Eric Botcazou  <ebotcazou@adacore.com>

	* config/sparc/linux64.h (ASAN_REJECT_SPEC): New macro.
	(ASAN_CC1_SPEC): Use it in 64-bit mode.
	* config/sparc/sol2.h (ASAN_REJECT_SPEC): Remove superfluous colon.

2019-04-01  Andrey Belevantsev  <abel@ispras.ru>

	PR rtl-optimization/85412
	* sel-sched.c (sel_sched_region): Assign reset_sched_cycles_p before
	sel_sched_region_1, not after.

2019-04-01  Andrey Belevantsev  <abel@ispras.ru>

	PR rtl-optimization/86928
	* sel-sched-ir.c (sel_redirect_edge_and_branch_force): Invoke
	compute_live if necessary.
	(sel_redirect_edge_and_branch): Likewise.

2019-04-01  Vladimir Makarov  <vmakarov@redhat.com>

	PR rtl-optimization/89865
	* ira-costs.c (process_bb_node_for_hard_reg_moves): Skip hard
	register if it is a part of small class.

2019-04-01  Andrey Belevantsev  <abel@ispras.ru>

	PR rtl-optimization/87273
	* sel-sched-ir.c (merge_fences): Remove assert.

2019-04-01  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/46590
	* domwalk.h (dom_walker::dom_walker): Consolidate constructors.
	(dom_walker::m_reachability): Add in place of...
	(dom_walker::m_skip_unreachable_blocks): ...this.
	* domwalk.c (dom_walker::dom_walker): Consoliate constructors.
	Move complex initialization ...
	(dom_walker::walk): Here.  Especially compute m_bb_to_rpo
	lazily and initialize edge flags on each invocation.
	(dom_walker::bb_reachable): Use m_reachability.

2019-04-01  Martin Liska  <mliska@suse.cz>

	PR driver/89861
	* opt-suggestions.c (option_proposer::build_option_suggestions):
	Add variant without any argument in order to provide better
	hints.

2019-04-01  Richard Biener  <rguenther@suse.de>

	PR c/71598
	* gimple.c: Include langhooks.h.
	(gimple_get_alias_set): Treat enumeral types as the underlying
	integer type.

2019-03-29  Kugan Vivekanandarajah  <kuganv@linaro.org>
	    Eric Botcazou  <ebotcazou@adacore.com>

	PR rtl-optimization/89862
	* rtl.h (word_register_operation_p): Exclude CONST_INT from operations
	that operates on the full registers for WORD_REGISTER_OPERATIONS
	architectures.

2019-03-29  Jim Wilson  <jimw@sifive.com>

	* common/config/riscv/riscv-common.c (riscv_parse_arch_string):
	Clear MASK_RVC and then set if C subset supported.

2019-03-29  Jakub Jelinek  <jakub@redhat.com>

	PR c/89872
	* gimplify.c (gimplify_compound_literal_expr): Don't optimize a
	non-addressable complit into its initializer if it is volatile.

2019-03-29  Roman Zhuykov  <zhroma@ispras.ru>

	* opts-common.c (integral_argument): Set errno properly in one case.

2019-03-29  Martin Liska  <mliska@suse.cz>

	* doc/invoke.texi: Remove -Wchkp from documentation.

2019-03-29  Martin Liska  <mliska@suse.cz>

	* dbgcnt.c (print_limit_reach): New function.
	(dbg_cnt): Use it.

2019-03-29  Martin Liska  <mliska@suse.cz>

	* dbgcnt.c (dbg_cnt_process_single_pair): Fix GNU coding style.
	(dbg_cnt_process_opt): Parse first tokens aas
	dbg_cnt_process_single_pair is also using strtok.

2019-03-29  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/87485
	* function.c (expand_function_end): Move stack_protect_epilogue
	before loading of return value into hard register(s).

2019-03-28  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/89621
	* tree-inline.h (struct copy_body_data): Add
	dont_remap_vla_if_no_change flag.
	* tree-inline.c (remap_type_3, remap_type_2): New functions.
	(remap_type): Don't remap vla types if id->dont_remap_vla_if_no_change
	and remap_type_2 returns false.
	* omp-low.c (new_omp_context): Set ctx->cb.dont_remap_vla_if_no_change.
	Move ctx->cb.adjust_array_error_bounds setting to the outermost ctx
	only from where it is copied to nested contexts.

2019-03-28  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/89865
	* config/i386/i386.md (RMW operation with LEA peephole):
	Use LEAMODE mode attribute instead of SWI mode iterator for
	LEA pattern.

2019-03-28  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/89848
	* config/i386/i386.c (dimode_scalar_chain::make_vector_copies):
	Also process XEXP (src, 0) of a shift insn.

2019-03-28  David Malcolm  <dmalcolm@redhat.com>

	PR middle-end/89725
	* optinfo-emit-json.cc (optrecord_json_writer::optinfo_to_json):
	Use DECL_ASSEMBLER_NAME rather than get_fnname_from_decl.

2019-03-28  Jakub Jelinek  <jakub@redhat.com>

	* regcprop.c (copyprop_hardreg_forward_1): Remove redundant INSN_P
	test.
	(cprop_hardreg_bb, cprop_hardreg_debug): New functions.
	(pass_cprop_hardreg::execute): Use those.  Don't repeat bb processing
	immediately after first one with df_analyze in between, but rather
	process all bbs, queueing ones that need second pass in a worklist,
	df_analyze, process queued debug insn changes and if second pass is
	needed, process bbs from worklist, df_analyze, process queued debug
	insns again.

	* rtl.h (NONDEBUG_INSN_P): Define as NONJUMP_INSN_P or JUMP_P
	or CALL_P instead of INSN_P && !DEBUG_INSN_P.
	(INSN_P): Define using NONDEBUG_INSN_P or DEBUG_INSN_P.

2019-03-28  Jonathan Wakely  <jwakely@redhat.com>

	PR c/79022
	* gengtype.h (create_nested_ptr_option): Fix parameter names to match
	definition.

2019-03-27  Mateusz B  <mateuszb@poczta.onet.pl>

	PR target/85667
	* config/i386/i386.c (ix86_function_value_1): Call the newly added
	function for 32-bit MS_ABI.
	(function_value_ms_32): New function.

2019-03-27  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn.md (CC_SAVE_REG): New constant.
	(movdi): Call gen_movdi_symbol_save_scc.
	(gen_movdi_symbol_save_scc): New insn and split.

2019-03-27  Peter Bergner  <bergner@linux.ibm.com>

	PR rtl-optimization/89313
	* function.c (matching_constraint_num): New static function.
	(match_asm_constraints_1): Use it.  Fixup white space and comment.
	Don't replace inputs with non-matching constraints which conflict
	with early clobber outputs.

2019-03-27  Jeff Law  <law@redhat.com>

	PR rtl-optimization/87761
	PR rtl-optimization/89826
	* regcprop.c (copyprop_hardreg_forward_1): Move may_trap_p test
	slightly later.
	(pass_cprop_hardreg::execute): Call df_analyze after adding the
	note problem to get REG_DEAD/REG_UNUSED notes updated.

2019-03-27  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/89463
	* tree-ssa-dce.c (remove_dead_stmt): Take output vector to
	queue edges to remove.
	(eliminate_unnecessary_stmts): Remove dead PHIs alongside
	dead stmts.  Delay edge removal until PHIs are removed to
	make debug-stmt creation not confused by seemingly degenerate
	PHIs.

2019-03-27  Alan Modra  <amodra@gmail.com>

	* config/rs6000/rs6000.h: Rename NON_SPECIAL_REGS to GEN_OR_FLOAT_REGS
	throughout file.
	* config/rs6000/darwin.h: Likewise.
	* config/rs6000/rs6000.c: Likewise.

2019-03-27  Alan Modra  <amodra@gmail.com>

	* config/rs6000/rs6000.c (rs6000_init_hard_regno_mode_ok): Always
	assign rs6000_hard_regno_mode_ok_p[m][r].  Formatting.

2019-03-26  Andrew Waterman  <andrew@sifive.com>
	    Jim Wilson  <jimw@sifive.com>

	* config/riscv/generic.md (generic_alu, generic_load, generic_store)
	(generic_xfer, generic_branch, generic_imul, generic_idivsi)
	(generic_idivdi, generic_fmul_single, generic_fmul_double)
	(generic_fdiv, generic_fsqrt): Add check for generic tune.
	(generic_alu): Add auipc to type list.
	* config/riscv/riscv-opts.h (enum riscv_microarchitecture_type): New.
	(riscv_microarchitecture): Declare.
	* config/riscv/riscv-protos.h (riscv_store_data_bypass_p): Declare.
	* config/riscv/riscv.c (struct riscv_cpu_info): Add microarchitecture
	field.
	(riscv_microarchitecture): New.
	(sifive_7_tune_info): New.
	(riscv_cpu_info_table): Add microarchitecture value for rocket and
	size.  Add sifive-3-series, sifive-5-series, and sifive-7-series
	entries.
	(riscv_store_data_bypass_p): New.
	(riscv_option_override): Set riscv_microarchitecture from
	cpu->microarchitecture.
	* config/riscv/riscv.md: Include sifive-7.md.
	(type): Add auipc.
	(tune): New.
	(auipc<mode>): Change type to auipc.
	(restore_stack_nonlocal): New.
	* config/riscv/sifive-7.md: New.
	* doc/invoke.texi (RISC-V Options): Update mtune docs.

2019-03-26  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/89827
	* config/i386/i386.c (dimode_scalar_chain::convert_reg):
	Also process XEXP (src, 0) of a shift insn.

2019-03-26  Richard Biener  <rguenther@suse.de>

	* tree-inline.c (remap_gimple_stmt): Cache gimple_block.
	(copy_debug_stmt): Likewise.
	(expand_call_inline): Likewise.
	(copy_bb): Avoid redundant lookup & set of gimple_block.
	* gimple-low.c (lower_gimple_return): Likewise.
	(lower_builtin_setjmp): Likewise.

2019-03-26  Jakub Jelinek  <jakub@redhat.com>

	* hash-table.h (hash_table::m_gather_mem_stats): If GATHER_STATISTICS
	is constant 0, turn into static const data member initialized to false.
	(hash_table::hash_table): Only initialize m_gather_mem_stats #if
	GATHER_STATISTICS.  Add ATTRIBUTE_UNUSED to gather_mem_stats param.

2019-03-26  Jason Merrill  <jason@redhat.com>
	    Jakub Jelinek  <jakub@redhat.com>

	* mem-stats.h (mem_alloc_description::unregister_descriptor): New
	method.
	(mem_alloc_description::release_object_overhead): Fix comment typos.
	* hash-table.h (hash_table::~hash_table): Call
	release_instance_overhead only if m_entries is non-NULL, otherwise
	call unregister_descriptor.

2019-03-26  Bin Cheng  <bin.cheng@linux.alibaba.com>

	PR tree-optimization/81740
	* tree-vect-data-refs.c (vect_analyze_data_ref_dependence):
	In case of outer loop vectorization, check for backward dependence
	at the inner loop if outer loop dependence is reversed.

2019-03-26  Alan Modra  <amodra@gmail.com>

	* config/rs6000/rs6000.c (rs6000_init_hard_regno_mode_ok): Correct
	rs6000_vector_mem init.  Correct wI and wJ comment.

2019-03-25  Alexander Monakov  <amonakov@ispras.ru>

	PR rtl-optimization/88347
	PR rtl-optimization/88423
	* sched-deps.c (sched_analyze_insn): Take into account that for
	tablejumps the barrier appears after a label and a jump_table_data.

2019-03-25  Martin Sebor  <msebor@redhat.com>

	PR c/89812
	* c-common.c (check_user_alignment): Rename local.  Correct maximum
	alignment in diagnostic.  Avoid assuming argument fits in SHWI,
	convert it to UHWI when it fits.

2019-03-25  Johan Karlsson  <johan.karlsson@enea.com>

	PR debug/86964
	* dwarf2out.c (premark_used_variables): New function.
	(prune_unused_types_walk): Do not mark not premarked external
	variables.
	(prune_unused_types): Call premark_used_variables.

2019-03-25  Vladimir Makarov  <vmakarov@redhat.com>

	PR rtl-optimization/89676
	* lra-constraints.c (curr_insn_transform): Do match reload for
	early clobbers when the match was successful only for different
	registers.

2019-03-25  Martin Sebor  <msebor@redhat.com>

	* doc/extend.texi (Common Type Attributes): Document vector_size.
	(Common Variable Attributes): Mention size constraint.  Correct
	quoting and typos.
	(Vector Extensions): Use @dfn when defining bas type.  Clarify
	base type and size constraints.

2019-03-25  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/89789
	* tree-ssa-sccvn.c (set_ssa_val_to): Do not allow lattice
	changes from non-undefined back to undefined.

2019-03-25  Thomas Otto  <thomas.otto@pdv-fs.de>

	* dwarf2out.c (comp_dir_string): cached_wd could be set to both a
	heap string and a gc string, but since this variable is unknown to
	ggc the gc string might get reused and corrupted. Fixed by always
	using a heap string.

2019-03-25  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/89779
	* tree-ssa-loop-ivopts.c (remove_unused_ivs): Return
	to remove IV defs, delay actual removal.
	(tree_ssa_iv_optimize_loop): Likewise.  Avoid SCEV reset.
	(tree_ssa_iv_optimize): Remove eliminated IV defs at the
	very end, properly also reset loop control IV information.

2019-03-25  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/89802
	* tree-ssa-math-opts.c (convert_mult_to_fma_1): Properly
	move EH data to folded stmt.

2019-03-25  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/s390-builtin-types.def: Remove few unused types and
	fix sort order for others.

2019-03-25  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/s390-c.c (s390_fn_types_compatible): Print the
	expected and found types with -mdebug during builtin matching.

2019-03-25  Richard Biener  <rguenther@suse.de>

	PR middle-end/89790
	* fold-const.c (operand_equal_p): Revert last change with
	updated comment.

2019-03-24  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.c (rs6000_legitimize_tls_address): Add REG_EQUAL
	notes for the result of the __tls_get_addr calls.
	* config/rs6000/rs6000.md (unspec UNSPEC_TLS_GET_ADDR): New.

2019-03-24  Jeff Law  <law@redhat.com>

	* config/bfin/bfin.md (movpdi): Fix length for alternative 1.

	PR rtl-optimization/87761
	* regcprop.c (copyprop_hardreg_forward_1): Check may_trap_p on SET,
	not INSN.  Also check RTX_FRAME_RELATED_P.  Queue insns for DF rescan
	as needed.
	(pass_cprop_hardreg::execute): Add df note problem and defer insn
	rescans.  Reprocess blocks as needed, calling df_analyze before
	reprocessing.  Always call df_analyze before fixing up debug bind
	insns.

2019-03-23  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/xmmintrin.h (_mm_movemask_pi8): Implement for 32-bit
	big endian.

2019-03-22  Andrew Pinski  <apinski@marvell.com>

	* config/aarch64/aarch64.md (zero_extendsidi2_aarch64): Fix type
	attrribute for uxtw.

2019-03-26  Jeff Law  <law@redhat.com>

	PR rtl-optimization/87761
	* config/mips/mips-protos.h (mips_split_move): Add new argument.
	(mips_emit_move_or_split): Pass NULL for INSN into mips_split_move.
	(mips_split_move): Accept new INSN argument.  Try to forward SRC
	into the next instruction.
	(mips_split_move_insn): Pass INSN through to mips_split_move.

2019-03-22  Vladimir Makarov  <vmakarov@redhat.com>

	PR rtl-optimization/89676
	* lra-constraints.c (curr_insn_transform): Do match reload for
	early clobbers even if the match was successful.

2019-03-22  Jakub Jelinek  <jakub@redhat.com>

	PR c++/87481
	* doc/invoke.texi (-fconstexpr-ops-limit=): Document.

2019-03-22  Bill Schmidt  <wschmidt@linux.ibm.com>

	* config/rs6000/mmintrin.h (_mm_sub_pi32): Fix typo.

2019-03-22  Jakub Jelinek  <jakub@redhat.com>

	* config/i386/sse.md (<avx512>_fmadd_<mode>_mask3<round_name>,
	<avx512>_fmsub_<mode>_mask3<round_name>,
	<avx512>_fnmadd_<mode>_mask3<round_name>,
	<avx512>_fnmsub_<mode>_mask3<round_name>,
	avx512f_vmfmadd_<mode>_mask3<round_name>,
	avx512f_vmfmsub_<mode>_mask3<round_name>,
	*avx512f_vmfnmadd_<mode>_mask3<round_name>): Use <round_nimm_predicate>
	instead of register_operand and %v instead of v for match_operand 1.
	(avx512f_vmfnmsub_<mode>_mask3<round_name>): Rename to ...
	(*avx512f_vmfnmsub_<mode>_mask3<round_name>): ... this.  Use
	<round_nimm_predicate> instead of register_operand and %v instead of v
	for match_operand 1.

	* config/i386/sse.md (<avx512>_fmadd_<mode>_mask<round_name>,
	<avx512>_fmadd_<mode>_mask3<round_name>,
	<avx512>_fmsub_<mode>_mask<round_name>,
	<avx512>_fmsub_<mode>_mask3<round_name>,
	<avx512>_fnmadd_<mode>_mask<round_name>,
	<avx512>_fnmadd_<mode>_mask3<round_name>,
	<avx512>_fnmsub_<mode>_mask<round_name>,
	<avx512>_fnmsub_<mode>_mask3<round_name>,
	<avx512>_fmaddsub_<mode>_mask<round_name>,
	<avx512>_fmaddsub_<mode>_mask3<round_name>,
	<avx512>_fmsubadd_<mode>_mask<round_name>,
	<avx512>_fmsubadd_<mode>_mask3<round_name>): Use
	<round_nimm_predicate> instead of nonimmediate_operand.
	(fmai_vmfmadd_<mode><round_name>, fmai_vmfmsub_<mode><round_name>,
	fmai_vmfnmadd_<mode><round_name>, fmai_vmfnmsub_<mode><round_name>):
	Use register_operand instead of <round_nimm_predicate> for the
	operand that needs to match output.
	(*fmai_fmadd_<mode>, *fmai_fmsub_<mode>,
	*fmai_fnmadd_<mode><round_name>, *fmai_fnmsub_<mode><round_name>):
	Likewise.  Formatting fixes.

	PR target/89784
	* config/i386/i386.c (enum ix86_builtins): Remove
	IX86_BUILTIN_VFMSUBSD3_MASK3 and IX86_BUILTIN_VFMSUBSS3_MASK3.
	* config/i386/i386-builtin.def (__builtin_ia32_vfmaddsd3_mask,
	__builtin_ia32_vfmaddsd3_mask3, __builtin_ia32_vfmaddsd3_maskz,
	__builtin_ia32_vfmsubsd3_mask3, __builtin_ia32_vfmaddss3_mask,
	__builtin_ia32_vfmaddss3_mask3, __builtin_ia32_vfmaddss3_maskz,
	__builtin_ia32_vfmsubss3_mask3): New builtins.
	* config/i386/sse.md (avx512f_vmfmadd_<mode>_mask<round_name>,
	avx512f_vmfmadd_<mode>_mask3<round_name>,
	avx512f_vmfmadd_<mode>_maskz_1<round_name>,
	*avx512f_vmfmsub_<mode>_mask<round_name>,
	avx512f_vmfmsub_<mode>_mask3<round_name>,
	*avx512f_vmfmasub_<mode>_maskz_1<round_name>,
	*avx512f_vmfnmadd_<mode>_mask<round_name>,
	*avx512f_vmfnmadd_<mode>_mask3<round_name>,
	*avx512f_vmfnmadd_<mode>_maskz_1<round_name>,
	*avx512f_vmfnmsub_<mode>_mask<round_name>,
	avx512f_vmfnmsub_<mode>_mask3<round_name>,
	*avx512f_vmfnmsub_<mode>_maskz_1<round_name>): New define_insns.
	(avx512f_vmfmadd_<mode>_maskz<round_expand_name>): New define_expand.
	* config/i386/avx512fintrin.h (_mm_mask_fmadd_sd, _mm_mask_fmadd_ss,
	_mm_mask3_fmadd_sd, _mm_mask3_fmadd_ss, _mm_maskz_fmadd_sd,
	_mm_maskz_fmadd_ss, _mm_mask_fmsub_sd, _mm_mask_fmsub_ss,
	_mm_mask3_fmsub_sd, _mm_mask3_fmsub_ss, _mm_maskz_fmsub_sd,
	_mm_maskz_fmsub_ss, _mm_mask_fnmadd_sd, _mm_mask_fnmadd_ss,
	_mm_mask3_fnmadd_sd, _mm_mask3_fnmadd_ss, _mm_maskz_fnmadd_sd,
	_mm_maskz_fnmadd_ss, _mm_mask_fnmsub_sd, _mm_mask_fnmsub_ss,
	_mm_mask3_fnmsub_sd, _mm_mask3_fnmsub_ss, _mm_maskz_fnmsub_sd,
	_mm_maskz_fnmsub_ss, _mm_mask_fmadd_round_sd, _mm_mask_fmadd_round_ss,
	_mm_mask3_fmadd_round_sd, _mm_mask3_fmadd_round_ss,
	_mm_maskz_fmadd_round_sd, _mm_maskz_fmadd_round_ss,
	_mm_mask_fmsub_round_sd, _mm_mask_fmsub_round_ss,
	_mm_mask3_fmsub_round_sd, _mm_mask3_fmsub_round_ss,
	_mm_maskz_fmsub_round_sd, _mm_maskz_fmsub_round_ss,
	_mm_mask_fnmadd_round_sd, _mm_mask_fnmadd_round_ss,
	_mm_mask3_fnmadd_round_sd, _mm_mask3_fnmadd_round_ss,
	_mm_maskz_fnmadd_round_sd, _mm_maskz_fnmadd_round_ss,
	_mm_mask_fnmsub_round_sd, _mm_mask_fnmsub_round_ss,
	_mm_mask3_fnmsub_round_sd, _mm_mask3_fnmsub_round_ss,
	_mm_maskz_fnmsub_round_sd, _mm_maskz_fnmsub_round_ss): New intrinsics.

2019-03-21  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/89350
	* builtins.c (compute_objsize): Also ignore offsets whose upper
	bound is negative.
	* gimple-ssa-warn-restrict.c (builtin_memref): Add new member.
	(builtin_memref::builtin_memref): Initialize new member.
	Allow EXPR to be null.
	(builtin_memref::extend_offset_range): Replace local with a member.
	Avoid assuming pointer offsets are unsigned.
	(builtin_memref::set_base_and_offset): Determine base object
	before computing offset range.
	(builtin_access::builtin_access): Handle memset.
	(builtin_access::generic_overlap): Replace local with a member.
	(builtin_access::strcat_overlap): Same.
	(builtin_access::overlap): Same.
	(maybe_diag_overlap): Same.
	(maybe_diag_access_bounds): Same.
	(wrestrict_dom_walker::check_call): Handle memset.
	(check_bounds_or_overlap): Same.

2019-03-21  Jan Hubicka  <hubicka@ucw.cz>
	    Jakub Jelinek  <jakub@redhat.com>

	PR lto/89692
	* tree.c (fld_type_variant, fld_incomplete_type_of,
	fld_process_array_type): Call fld->pset.add and don't call
	add_tree_to_fld_list if it returns true.
	(free_lang_data_in_type): Similarly with self-recursive call.  Purge
	non-marked types from TYPE_NEXT_VARIANT list.
	(find_decls_types_r): Call fld_worklist_push for TYPE_CANONICAL (t).

2019-03-21  Jakub Jelinek  <jakub@redhat.com>

	* hash-table.h (hash_table): Add Lazy template parameter defaulted
	to false, if true, don't alloc_entries during construction, but defer
	it to the first method that needs m_entries allocated.
	(hash_table::hash_table, hash_table::~hash_table,
	hash_table::alloc_entries, hash_table::find_empty_slot_for_expand,
	hash_table::too_empty_p, hash_table::expand, hash_table::empty_slow,
	hash_table::clear_slot, hash_table::traverse_noresize,
	hash_table::traverse, hash_table::iterator::slide): Adjust all methods.
	* hash-set.h (hash_set): Add Lazy template parameter defaulted to
	false.
	(hash_set::contains): If Lazy is true, use find_slot_with_hash with
	NO_INSERT instead of find_with_hash.
	(hash_set::traverse, hash_set::iterator, hash_set::iterator::m_iter,
	hash_set::m_table): Add Lazy to template params of hash_table.
	(gt_ggc_mx, gt_pch_nx): Use false as Lazy in hash_set template param.
	* attribs.c (test_attribute_exclusions): Likewise.
	* hash-set-tests.c (test_set_of_strings): Add iterator tests for
	hash_set.  Add tests for hash_set with Lazy = true.

2019-03-21  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/89779
	* tree.c (tree_nop_conversion): Consolidate and fix defensive
	checks with respect to released SSA names now having error_mark_node
	type.
	* fold-const.c (operand_equal_p): Likewise.

2019-03-20  Andreas Krebbel  <krebbel@linux.ibm.com>

	PR target/89775
	* config/s390/s390.c (global_not_special_regno_p): Move to make it
	available to ...
	(s390_optimize_register_info): Use global_not_special_regno_p to
	check for global regs.

2019-03-20  Jakub Jelinek  <jakub@redhat.com>

	PR target/89752
	* lra-constraints.c (process_alt_operands) <reg>: For BLKmode, don't
	update this_alternative nor this_alternative_set.

2019-03-19  Jim Wilson  <jimw@sifive.com>

	PR target/89411
	* config/riscv/riscv.c (riscv_valid_lo_sum_p): New arg x.  New locals
	align, size, offset.  Use them to handle a BLKmode reference.  Update
	comment.
	(riscv_classify_address): Pass info->offset to riscv_valid_lo_sum_p.

2019-03-19  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/89768
	* loop-unroll.c (unroll_loop_constant_iterations): Use gen_int_mode
	instead of GEN_INT.
	(unroll_loop_runtime_iterations): Likewise.

2019-03-19  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/89644
	* tree-ssa-strlen.c (handle_builtin_stxncpy): Use full_string_p
	rather than endptr as an indicator of nul-termination.

	PR tree-optimization/89644
	* tree-ssa-strlen.c (handle_builtin_stxncpy): Consider unterminated
	arrays in determining sequence sizes in strncpy and stpncpy.

2019-03-19  Martin Liska  <mliska@suse.cz>

	PR middle-end/89737
	* predict.c (combine_predictions_for_bb): Empty likely_edges and
	unlikely_edges if there's an edge that belongs to both these sets.

2018-03-19  Segher Boessenkool  <segher@kernel.crashing.org>

	PR target/89746
	* config/rs6000/rs6000.md (fix_trunc<mode>si2_stfiwx): If we have a
	non-TARGET_MFCRF target, and the dest is memory but not 32-bit aligned,
	go via a stack temporary.

2019-03-19  Jakub Jelinek  <jakub@redhat.com>

	PR target/89378
	* config/mips/mips.c (mips_expand_vec_cond_expr): Use gen_lowpart
	instead of gen_rtx_SUBREG.
	* config/mips/mips-msa.md (vec_extract<mode><unitmode>): Likewise.

2019-03-19  Richard Biener  <rguenther@suse.de>

	PR debug/88389
	* opts.c (finish_options): Disable -gsplit-dwarf when doing LTO.

2019-03-19  Jan Hubicka  <hubicka@ucw.cz>

	PR lto/87809
	PR lto/89335
	* tree.c (free_lang_data_in_decl): Do not free context of C++
	destrutors.

2019-03-19  Jakub Jelinek  <jakub@redhat.com>

	PR target/89506
	* config/arm/arm.md (cmpsi2_addneg): Swap the alternatives and use
	subs for the first alternative except when operands[3] is 1.

	PR target/89752
	* gimplify.c (gimplify_asm_expr): For output argument with
	TREE_ADDRESSABLE type, clear allows_reg if it allows memory, otherwise
	diagnose error.

2019-03-19  Eric Botcazou  <ebotcazou@adacore.com>

	PR rtl-optimization/89753
	* loop-unroll.c (decide_unroll_constant_iterations): Make guard for
	explicit unrolling factor even more robust.

2019-03-19  Jakub Jelinek  <jakub@redhat.com>

	PR target/89726
	* config/i386/i386.c (ix86_expand_floorceildf_32): In ceil
	compensation use x2 += 1 instead of x2 -= -1 and when honoring
	signed zeros, do another copysign after the compensation.

2019-03-18  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/89720
	* tree-vrp.c (vrp_prop::check_mem_ref): Treat range with max < min
	more conservatively, the same as anti-range.

2019-03-18  Richard Biener  <rguenther@suse.de>

	PR middle-end/88945
	* tree-ssanames.c (release_ssa_name_fn): For released SSA names
	use a TREE_TYPE of error_mark_node to avoid ICEs when dumping
	basic-blocks that are removed.  Remove restoring SSA_NAME_VAR.
	* tree-outof-ssa.c (eliminate_useless_phis): Remove redundant checking.

2019-03-18  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn-run.c (struct output): Make next_output unsigned.
	Extend queue to 1024 entries.
	Add "consumed" field.
	(gomp_print_output): Remove print_index parameter.
	Add final parameter.
	Change limit to unsigned.
	Use consumed field to implement circular buffer.
	Detect interrupted print in final pass.
	Flush output at the end.
	(run): Update gomp_print_output usage.
	(main): Initialize kernargs->output_data.consumed.

2019-03-18  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-loop.c (vect_estimate_min_profitable_iters): Fix the
	calculation of the minimum number of scalar iterations for
	fully-predicated loops.

2019-03-18  Martin Jambor  <mjambor@suse.cz>

	PR tree-optimization/89546
	* tree-sra.c (propagate_subaccesses_across_link): Requeue new_acc if
	any propagation to its children took place.

2019-03-18  Andrew Burgess  <andrew.burgess@embecosm.com>

	PR target/89627
	* config/riscv/riscv.c (riscv_pass_fpr_single): Add offset
	parameter, and make use of it.
	(riscv_get_arg_info): Pass offset to riscv_pass_fpr_single.

2019-03-18  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.opt (mcode-density-frame): Get the inital value
	from TARGET_CODE_DENSITY_FRAME_DEFAULT.
	* config/arc/elf.h (TARGET_CODE_DENSITY_FRAME_DEFAULT): Define.
	* config/arc/linux.h (TARGET_CODE_DENSITY_FRAME_DEFAULT): Define.
	* config/arc/arc.md (pop_multi_fp_blink): Adjust constraints to
	match what the ops is doing.
	(push_multi_fp_blink): Likewise.
	* config/arc/arc.c (arc_override_options): Enable enter/leave when
	compiling for size and elf target.
	(arc_save_callee_enter): Adjust note to match what enter/leave
	operation does.

2019-03-18  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.md (tst_movb): Fix constraint.

2019-03-18  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.c (TARGET_HAVE_SPECULATION_SAFE_VALUE): Define.

2019-03-18  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc-protos.h (arc_adjust_reg_alloc_order): Declare.
	* config/arc/arc.c (arc_conditional_register_usage): Remove all
	reg_alloc_order references.
	(size_alloc_order): Define.
	(arc_adjust_reg_alloc_order): New function.
	* config/arc/arc.h (REG_ALLOC_ORDER): Proper define the register
	order.
	(ADJUST_REG_ALLOC_ORDER): Define.
	(HONOR_REG_ALLOC_ORDER): Likewise.

2019-03-18  Richard Biener  <rguenther@suse.de>

	PR target/87561
	* config/i386/i386.c (ix86_add_stmt_cost): Pessimize strided
	loads and stores a bit more.

2019-03-18  Richard Biener  <rguenther@suse.de>

	PR target/87561
	* config/i386/i386.c (ix86_add_stmt_cost): Apply strided
	load pessimization to stores as well.

2019-03-18  Andrey Belevantsev  <abel@ispras.ru>

	PR middle-end/86979
	* sel-sched.c (compute_av_set_at_bb_end): When we have an ineligible
	successor, use NULL as its av set.

2019-03-15  Segher Boessenkool  <segher@kernel.crashing.org>

	PR rtl-optimization/89721
	* lra-constraints (invariant_p): Return false if side_effects_p holds.

2019-03-15  Kelvin Nilsen  <kelvin@gcc.gnu.org>

	PR target/87532
	* config/rs6000/rs6000-c.c (altivec_resolve_overloaded_builtin):
	When handling vec_extract, use modular arithmetic to allow
	constant selectors greater than vector length.
	* config/rs6000/rs6000.c (rs6000_expand_vector_extract): Allow
	V1TImode vectors to have constant selector values greater than 0.
	Use modular arithmetic to compute vector index.
	(rs6000_split_vec_extract_var): Use modular arithmetic to compute
	index for in-memory vectors.  Correct code generation for
	in-register vectors.
	(altivec_expand_vec_ext_builtin): Use modular arithmetic to
	compute index.

2019-03-15  Alexandre Oliva  <aoliva@redhat.com>

	PR c++/88534
	PR c++/88537
	* dwarf2out.c (generic_parameter_die): Follow DECL_INITIAL of
	VAR_DECL args.

2019-03-15  Jakub Jelinek  <jakub@redhat.com>

	PR c++/89709
	* tree.c (inchash::add_expr): Strip any location wrappers.
	* fold-const.c (operand_equal_p): Move stripping of location wrapper
	after hash verification.

	PR debug/89704
	* dwarf2out.c (add_const_value_attribute): Return false for MINUS,
	SIGN_EXTEND and ZERO_EXTEND.

2019-03-14  Jason Merrill  <jason@redhat.com>
	    Jakub Jelinek  <jakub@redhat.com>

	* hash-table.h (remove_elt_with_hash): Return if slot is NULL rather
	than if is_empty (*slot).
	* hash-set-tests.c (test_set_of_strings): Add tests for addition of
	existing elt and for elt removal.
	* hash-map-tests.c (test_map_of_strings_to_int): Add test for removal
	of already removed elt.

2019-03-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89650
	* config/i386/i386.c (remove_partial_avx_dependency): Handle
	REG_EH_REGION note.

2019-03-14  Martin Liska  <mliska@suse.cz>

	PR other/89712
	* doc/invoke.texi: Remove -fdump-class-hierarchy option.

2019-03-14  Richard Biener  <rguenther@suse.de>

	PR target/89711
	* config/i386/i386.c (make_resolver_func): Properly set
	DECL_CONTEXT on the RESULT_DECL.
	* config/rs6000/rs6000.c (make_resolver_func): Likewise.

2019-03-14  Richard Biener  <rguenther@suse.de>

	* gimple-pretty-print.c: Include cfgloop.h.
	(dump_gimple_phi): Adjust.
	(dump_gimple_bb_header): Dump loop header for GIMPLE.
	(pp_cfg_jump): Adjust.
	(dump_implicit_edges): Dump fallthru to next block for GIMPLE as well.
	* tree-cfg.c (build_gimple_cfg): Remove lower_phi_internal_fn call.
	(lower_phi_internal_fn): Remove.
	(verify_gimple_call): Remove IFN_PHI special-casing.
	(dump_function_to_file): Dump IL state.
	* tree-into-ssa.c (rewrite_add_phi_arguments): Revert changes
	done to deal with PHI nodes being present in non-SSA state.

2019-03-14  Jakub Jelinek  <jakub@redhat.com>

	PR ipa/89684
	* multiple_target.c (create_dispatcher_calls): Change
	references_to_redirect from vector of ipa_ref * to vector of ipa_ref.
	In the node->iterate_referring loop, push *ref rather than ref, call
	ref->remove_reference () and always pass 0 to iterate_referring.

	PR rtl-optimization/89679
	* expmed.c (expand_mult_const): Don't add a REG_EQUAL note if it
	would contain a paradoxical SUBREG.

2019-03-14  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/89710
	* tree-ssa-loop-ch.c (should_duplicate_loop_header_p): Use
	safe_dyn_cast.

2019-03-14  Martin Liska  <mliska@suse.cz>

	* coverage.c (coverage_begin_function): Stream also
	end_column.
	* doc/gcov.texi: Document 2 new fields in JSON file.  Improve
	documentation about function declaration location.
	* gcov-dump.c (tag_function): Print whole range
	of function declaration.
	* gcov.c (struct function_info): Add end_column field.
	(function_info::function_info): Initialize it.
	(output_json_intermediate_file): Output {start,end}_column
	fields.
	(read_graph_file): Read end_column.

2019-03-14  Richard Biener  <rguenther@suse.de>

	PR middle-end/89698
	* fold-const.c (operand_equal_p): For INDIRECT_REF check
	that the access types are similar.

2019-03-14  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/89703
	* tree-ssa-strlen.c (valid_builtin_call): Punt if stmt call types
	aren't compatible also with builtin_decl_explicit.  Check pure
	or non-pure status of BUILT_IN_STR{{,N}CMP,N{LEN,{CAT,CPY}{,_CHK}}}
	and BUILT_IN_STPNCPY{,_CHK}.

2019-03-14  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89523
	* config/i386/i386.c (ix86_print_operand): Handle 'M' to add
	addr32 prefix to VSIB address for X32.
	* config/i386/sse.md (*avx512pf_gatherpf<mode>sf_mask): Prepend
	"%M2" to opcode.
	(*avx512pf_gatherpf<mode>df_mask): Likewise.
	(*avx512pf_scatterpf<mode>sf_mask): Likewise.
	(*avx512pf_scatterpf<mode>df_mask): Likewise.
	(*avx2_gathersi<mode>): Prepend "%M3" to opcode.
	(*avx2_gathersi<mode>_2): Prepend "%M2" to opcode.
	(*avx2_gatherdi<mode>): Prepend "%M3" to opcode.
	(*avx2_gatherdi<mode>_2): Prepend "%M2" to opcode.
	(*avx2_gatherdi<mode>_3): Prepend "%M3" to opcode.
	(*avx2_gatherdi<mode>_4): Prepend "%M2" to opcode.`
	(*avx512f_gathersi<mode>): Prepend "%M4" to opcode.
	(*avx512f_gathersi<mode>_2): Prepend "%M3" to opcode.
	(*avx512f_gatherdi<mode>): Prepend "%M4" to opcode.
	(*avx512f_gatherdi<mode>_2): Prepend "%M3" to opcode.
	(*avx512f_scattersi<mode>): Prepend "%M0" to opcode.
	(*avx512f_scatterdi<mode>): Likewise.

2019-03-13  Vladimir Makarov  <vmakarov@redhat.com>

	PR target/85860
	* lra-constraints.c (inherit_in_ebb): Update
	potential_reload_hard_regs along with live_hard_regs.

2019-03-13  Jakub Jelinek  <jakub@redhat.com>

	PR debug/89498
	* dwarf2out.c (size_of_die): For dw_val_class_view_list always use
	DWARF_OFFSET_SIZE.
	(value_format): For dw_val_class_view_list never use DW_FORM_loclistx.

2019-03-13  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/89662
	* tree-vrp.c (vrp_prop::check_mem_ref): Avoid assuming every type
	has a size.

2019-03-13  Richard Biener  <rguenther@suse.de>

	PR middle-end/89677
	* tree-scalar-evolution.c (simplify_peeled_chrec): Do not
	throw FP expressions at tree-affine.

2019-03-14  Richard Biener  <rguenther@suse.de>

	* tree-pretty-print.c (dump_generic_node): For -gimple properly
	dump negative integer constants using _Literal (type) -num.

2019-03-13  Jakub Jelinek  <jakub@redhat.com>

	* ipa-param-manipulation.h (struct ipa_parm_adjustment): Remove
	nonlocal_value member.

	PR middle-end/88588
	* omp-simd-clone.c (ipa_simd_modify_stmt_ops): Handle PHI args.
	(ipa_simd_modify_function_body): Handle PHIs.

2019-03-12  Robin Dapp  <rdapp@linux.ibm.com>

	* config/s390/s390.c (s390_option_override_internal): Use more
	aggressive inlining parameters.

2019-03-12  Robin Dapp  <rdapp@linux.ibm.com>

	* config/s390/3906.md: New file.
	* config/s390/s390.c (MAX_SCHED_UNITS): Increase.
	(LONGRUNNING_THRESHOLD): Remove.
	(MAX_SCHED_MIX_SCORE): Decrease.
	(MAX_SCHED_MIX_DISTANCE): Decrease.
	(s390_bb_fallthru_entry_likely): Assume fallthru for less than likely.
	(struct s390_sched_state): New struct to hold scheduling state.
	(S390_SCHED_STATE_NORMAL): Remove.
	(S390_SCHED_STATE_CRACKED): Remove.
	(S390_SCHED_ATTR_MASK_GROUPOFTWO): Add.
	(s390_get_sched_attrmask): Use new attribute.
	(s390_get_unit_mask): Use new units.
	(s390_is_fpd): New function.
	(s390_is_fxd): New function.
	(s390_is_longrunning): New function.
	(s390_sched_score): Use new functions.
	(s390_sched_reorder): Likewise.
	(s390_sched_variable_issue): Rework and use new functions.
	(s390_sched_init): Use new functions.
	* config/s390/s390.h (s390_tune_attr): Add z14.
	* config/s390/s390.md: Add z14.

2019-03-12  Robin Dapp  <rdapp@linux.ibm.com>

	* config/s390/2964.md: Update pipeline description.
	* config/s390/s390.c (MAX_SCHED_UNITS): Increase.
	(LONGRUNNING_THRESHOLD): Remove.
	(LATENCY_FACTOR): Remove.
	(s390_get_unit_mask): Add unit.
	(s390_sched_score): Use fxd/fpd.
	(s390_sched_variable_issue): Use fxd/fpd.

2019-03-12  Martin Liska  <mliska@suse.cz>

	* config/i386/i386.c: Reword an error message.

2019-03-12  Martin Jambor  <mjambor@suse.cz>

	* cgraph.c (cgraph_node::dump): Dump more info for former thunks,
	terminate with newline.

2019-03-12  Jakub Jelinek  <jakub@redhat.com>

	PR target/52726
	* config/s390/s390.md (tabort): Use %wd instead of
	HOST_WIDE_INT_PRINT_DEC in error message, reword to avoid two capital
	letters and periods.
	* config/tilepro/tilepro.c (tilepro_print_operand): Use %wd in
	output_operand_lossage instead of HOST_WIDE_INT_PRINT_DEC, replace
	's with %< and %>.

	PR middle-end/89663
	* builtins.c (expand_builtin_int_roundingfn,
	expand_builtin_int_roundingfn_2): Return NULL_RTX instead of
	gcc_unreachable if validate_arglist fails.

2019-03-12  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/89664
	* tree-ssa-math-opts.c (execute_cse_reciprocals_1): Properly
	free the occurance tree after the early out.

2019-03-11  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/89655
	PR bootstrap/89656
	* vr-values.c (vr_values::update_value_range): If
	old_vr->varying_p (), don't update it, make new_vr also VARYING
	and return false.

2019-03-11  Martin Liska  <mliska@suse.cz>

	* config/aarch64/aarch64.c (aarch64_override_options_internal):
	Fix double string quoting.

2019-03-11  Martin Liska  <mliska@suse.cz>

	* collect-utils.c (collect_wait): Wrap apostrophes
	in gcc internal format with %'.
	* collect2.c (main): Likewise.
	(scan_prog_file): Likewise.
	(scan_libraries): Likewise.
	* config/i386/i386.c (ix86_expand_call): Likewise.
	(ix86_handle_interrupt_attribute): Likewise.
	* config/nds32/nds32-intrinsic.c (nds32_expand_builtin_impl): Likewise.
	* config/nds32/nds32.c (nds32_insert_attributes): Likewise.
	* config/rl78/rl78.c (rl78_handle_saddr_attribute): Likewise.
	* lto-wrapper.c (find_crtoffloadtable): Likewise.
	* symtab.c (symtab_node::verify_base): Likewise.
	* tree-cfg.c (verify_gimple_label): Likewise.
	* tree.c (verify_type_variant): Likewise.

2019-03-11  Martin Liska  <mliska@suse.cz>

	* builtins.c (expand_builtin_thread_pointer): Wrap an option name
	in a string format message and fix GNU coding style.
	(expand_builtin_set_thread_pointer): Likewise.
	* common/config/aarch64/aarch64-common.c
	(aarch64_rewrite_selected_cpu): Likewise.
	* common/config/alpha/alpha-common.c (alpha_handle_option): Likewise.
	* common/config/arc/arc-common.c (arc_handle_option): Likewise.
	* common/config/arm/arm-common.c (arm_parse_fpu_option): Likewise.
	* common/config/bfin/bfin-common.c (bfin_handle_option): Likewise.
	* common/config/i386/i386-common.c (ix86_handle_option): Likewise.
	* common/config/ia64/ia64-common.c (ia64_handle_option): Likewise.
	* common/config/m68k/m68k-common.c (m68k_handle_option): Likewise.
	* common/config/msp430/msp430-common.c (msp430_handle_option): Likewise.
	* common/config/nds32/nds32-common.c (nds32_handle_option): Likewise.
	* common/config/powerpcspe/powerpcspe-common.c (rs6000_handle_option):
	Likewise.
	* common/config/riscv/riscv-common.c
	(riscv_subset_list::parsing_subset_version): Likewise.
	(riscv_subset_list::parse_std_ext): Likewise.
	(riscv_subset_list::parse_sv_or_non_std_ext): Likewise.
	(riscv_subset_list::parse): Likewise.
	* common/config/rs6000/rs6000-common.c (rs6000_handle_option): Likewise.
	* config/aarch64/aarch64.c (aarch64_parse_one_option_token): Likewise.
	(aarch64_override_options_internal): Likewise.
	(aarch64_validate_mcpu): Likewise.
	(aarch64_validate_march): Likewise.
	(aarch64_validate_mtune): Likewise.
	(aarch64_override_options): Likewise.
	* config/alpha/alpha.c (alpha_option_override): Likewise.
	* config/arc/arc.c (arc_init): Likewise.
	(parse_mrgf_banked_regs_option): Likewise.
	(arc_override_options): Likewise.
	(arc_expand_builtin_aligned): Likewise.
	* config/arm/arm-builtins.c (arm_expand_neon_builtin): Likewise.
	(arm_expand_builtin): Likewise.
	* config/arm/arm.c (arm_option_check_internal): Likewise.
	(arm_configure_build_target): Likewise.
	(arm_option_override): Likewise.
	(arm_options_perform_arch_sanity_checks): Likewise.
	(arm_handle_cmse_nonsecure_entry): Likewise.
	(arm_handle_cmse_nonsecure_call): Likewise.
	(arm_tls_referenced_p): Likewise.
	(thumb1_expand_prologue): Likewise.
	* config/avr/avr.c (avr_option_override): Likewise.
	* config/bfin/bfin.c (bfin_option_override): Likewise.
	* config/c6x/c6x.c (c6x_option_override): Likewise.
	* config/cr16/cr16.c (cr16_override_options): Likewise.
	* config/cris/cris.c (cris_option_override): Likewise.
	* config/csky/csky.c (csky_handle_isr_attribute): Likewise.
	* config/darwin-c.c (macosx_version_as_macro): Likewise.
	* config/darwin.c (darwin_override_options): Likewise.
	* config/frv/frv.c (frv_expand_builtin): Likewise.
	* config/h8300/h8300.c (h8300_option_override): Likewise.
	* config/i386/i386.c (parse_mtune_ctrl_str): Likewise.
	(ix86_option_override_internal): Likewise.
	(warn_once_call_ms2sysv_xlogues): Likewise.
	(ix86_expand_prologue): Likewise.
	(split_stack_prologue_scratch_regno): Likewise.
	(ix86_warn_parameter_passing_abi): Likewise.
	* config/ia64/ia64.c (fix_range): Likewise.
	* config/m68k/m68k.c (m68k_option_override): Likewise.
	* config/microblaze/microblaze.c (microblaze_option_override): Likewise.
	* config/mips/mips.c (mips_emit_probe_stack_range): Likewise.
	(mips_set_compression_mode): Likewise.
	* config/mmix/mmix.c (mmix_option_override): Likewise.
	* config/mn10300/mn10300.c (mn10300_option_override): Likewise.
	* config/msp430/msp430.c (msp430_option_override): Likewise.
	* config/nds32/nds32.c (nds32_option_override): Likewise.
	* config/nios2/nios2.c (nios2_custom_check_insns): Likewise.
	(nios2_option_override): Likewise.
	(nios2_expand_custom_builtin): Likewise.
	* config/nvptx/mkoffload.c (main): Likewise.
	* config/nvptx/nvptx.c (diagnose_openacc_conflict): Likewise.
	* config/pa/pa.c (fix_range): Likewise.
	(pa_option_override): Likewise.
	* config/riscv/riscv.c (riscv_parse_cpu): Likewise.
	(riscv_option_override): Likewise.
	* config/rl78/rl78.c (rl78_option_override): Likewise.
	* config/rs6000/aix61.h: Likewise.
	* config/rs6000/aix71.h: Likewise.
	* config/rs6000/aix72.h: Likewise.
	* config/rs6000/driver-rs6000.c (elf_platform): Likewise.
	* config/rs6000/freebsd64.h: Likewise.
	* config/rs6000/linux64.h: Likewise.
	* config/rs6000/rs6000.c (rs6000_option_override_internal): Likewise.
	(rs6000_expand_zeroop_builtin): Likewise.
	(rs6000_expand_mtfsb_builtin): Likewise.
	(rs6000_expand_set_fpscr_rn_builtin): Likewise.
	(rs6000_expand_set_fpscr_drn_builtin): Likewise.
	(rs6000_invalid_builtin): Likewise.
	(rs6000_expand_split_stack_prologue): Likewise.
	* config/rs6000/rtems.h: Likewise.
	* config/rx/rx.c (valid_psw_flag): Likewise.
	(rx_expand_builtin): Likewise.
	* config/s390/s390-c.c (s390_resolve_overloaded_builtin): Likewise.
	* config/s390/s390.c (s390_expand_builtin): Likewise.
	(s390_function_profiler): Likewise.
	(s390_option_override_internal): Likewise.
	(s390_option_override): Likewise.
	* config/sh/sh.c (sh_option_override): Likewise.
	(sh_builtin_saveregs): Likewise.
	(sh_fix_range): Likewise.
	* config/sh/vxworks.h: Likewise.
	* config/sparc/sparc.c (sparc_option_override): Likewise.
	* config/spu/spu.c (spu_option_override): Likewise.
	(fix_range): Likewise.
	* config/visium/visium.c (visium_option_override): Likewise.
	(visium_handle_interrupt_attr): Likewise.
	* config/xtensa/xtensa.c (xtensa_option_override): Likewise.
	* dbgcnt.c (dbg_cnt_set_limit_by_name): Likewise.
	(dbg_cnt_process_opt): Likewise.
	* dwarf2out.c (output_dwarf_version): Likewise.
	* except.c (expand_eh_return): Likewise.
	* gcc.c (defined): Likewise.
	(driver_handle_option): Likewise.
	(process_command): Likewise.
	(compare_files): Likewise.
	(driver::prepare_infiles): Likewise.
	(driver::do_spec_on_infiles): Likewise.
	(driver::maybe_run_linker): Likewise.
	* omp-offload.c (oacc_parse_default_dims): Likewise.
	* opts-global.c (handle_common_deferred_options): Likewise.
	* opts.c (parse_sanitizer_options): Likewise.
	(common_handle_option): Likewise.
	(enable_warning_as_error): Likewise.
	* passes.c (enable_disable_pass): Likewise.
	* plugin.c (parse_plugin_arg_opt): Likewise.
	(default_plugin_dir_name): Likewise.
	* targhooks.c (default_expand_builtin_saveregs): Likewise.
	(default_pch_valid_p): Likewise.
	* toplev.c (init_asm_output): Likewise.
	(process_options): Likewise.
	(toplev::run_self_tests): Likewise.
	* tree-cfg.c (verify_gimple_call): Likewise.
	* tree-inline.c (inline_forbidden_p_stmt): Likewise.
	(tree_inlinable_function_p): Likewise.
	* var-tracking.c (vt_find_locations): Likewise.

2019-03-11  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/s390.c (s390_expand_builtin): Do the copy_to_reg not
	only on the else branch.

2019-03-11  Martin Liska  <mliska@suse.cz>

	* gcov.c (output_intermediate_json_line): Print function
	name of each line.
	(output_json_intermediate_file): Add new argument.
	* doc/gcov.texi: Document the change.

2019-03-11  Eric Botcazou  <ebotcazou@adacore.com>

	PR rtl-optimization/89588
	* loop-unroll.c (decide_unroll_constant_iterations): Make guard for
	explicit unrolling factor more robust.

2019-03-11  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/89649
	* tree-vectorizer.h (vect_loop_versioning): Adjust prototype.
	* tree-vect-loop-manip.c (vect_do_peeling): Unset force_vectorize
	on the prolog and epilog loops.
	(vect_loop_versioning): Return copy of loop.
	* tree-vect-loop.c (vect_transform_loop): Unset force_vectorize
	on the non-vectorized version of the loop.

2019-03-10  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/68924
	* config/i386/sse.md (*vec_extractv2di_0_sse):
	Add (=r,x) alternative and corresponding splitter.

2019-03-10  Martin Jambor  <mjambor@suse.cz>

	PR tree-optimization/85762
	PR tree-optimization/87008
	PR tree-optimization/85459
	* tree-sra.c (contains_vce_or_bfcref_p): New parameter, set the bool
	it points to if there is a type changing MEM_REF.  Adjust all callers.
	(build_accesses_from_assign): Disable total scalarization if
	contains_vce_or_bfcref_p returns true through the new parameter, for
	both rhs and lhs.

2019-03-09  Jakub Jelinek  <jakub@redhat.com>

	PR c/88568
	* attribs.c (handle_dll_attribute): Don't clear TREE_STATIC for
	dllimport on VAR_DECLs with RECORD_TYPE or UNION_TYPE DECL_CONTEXT.

	PR target/79645
	* common.opt (fdiagnostics-show-labels,
	fdiagnostics-show-line-numbers, fdiagnostics-format=,
	fdiagnostics-minimum-margin-width=, fgnat-encodings=, gas-loc-support,
	gas-locview-support, ginline-points, ginternal-reset-location-views):
	Terminate description text with a dot.
	* config/microblaze/microblaze.opt (mxl-prefetch): Likewise.
	* config/mcore/mcore.opt (m210, m340): Likewise.
	* config/epiphany/epiphany.opt (mprefer-short-insn-regs, mcmove,
	mnops=): Start description text with a capital letter.
	* config/arc/arc.opt (msize-level=): Likewise.
	* config/sh/sh.opt (minline-ic_invalidate): Likewise.
	* config/rs6000/sysv4.opt (mno-toc, mtoc, mno-traceback, mshlib,
	mnewlib): Likewise.
	* config/ft32/ft32.opt (msim): Likewise.
	(mft32b, mcompress): Likewise.  Terminate description text with a dot.
	(mnodiv, mnopm): Terminate description text with a dot.
	* config/c6x/c6x.opt (c6x_sdata): Terminate Enum description with
	a colon.
	* config/i386/i386.opt (prefer_vector_width, instrument_return):
	Likewise.
	* config/rx/rx.opt (nofpu): Remove trailing spaces from description
	text.

	PR rtl-optimization/89634
	* cfgcleanup.c (thread_jump): Punt if registers mentioned in cond1
	are modified in BB_END (e->src) instruction.

2019-03-08  David Malcolm  <dmalcolm@redhat.com>

	PR target/79926
	* config/i386/i386.c (ix86_set_current_function): Make "sorry"
	messages more amenable to translation, and improve wording.

2019-03-08  Bill Schmidt  <wschmidt@linux.ibm.com>

	* config/rs6000/rs6000-p8swap.c (rs6000_analyze_swaps): Rebuild
	ud- and du-chains between phases.

2019-03-08  Richard Sandiford  <richard.sandiford@arm.com>

	PR debug/89631
	* dwarf2cfi.c (dwarf2out_frame_debug_expr): Use CONST_POLY_INT
	instead of POLY_INT_CST.

2019-03-08  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	* config/arm/arm.h (TARGET_FP16_TO_DOUBLE): Add TARGET_VFP_DOUBLE
	requirement.

2019-03-08  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/68924
	PR target/78782
	PR target/87558
	* config/i386/emmintrin.h (_mm_loadu_si64): New intrinsic.
	(_mm_storeu_si64): Ditto.

2019-03-08  Martin Liska  <mliska@suse.cz>

	PR target/86952
	* config/i386/i386.c (ix86_option_override_internal): Disable
	jump tables when retpolines are used.

2019-03-08  Jan Hubicka  <hubicka@ucw.cz>

	PR go/63560
	* ipa-split.c (execute_split_functions): Do not split
	'noinline' or 'section' function.

2019-03-08  Jakub Jelinek  <jakub@redhat.com>

	PR target/79846
	* config/s390/s390.c (s390_const_operand_ok): Use %wu instead of
	HOST_WIDE_INT_PRINT_UNSIGNED and %wd instead of
	HOST_WIDE_INT_PRINT_DEC.  Formatting fixes.

	PR ipa/80000
	* ipa-devirt.c (compare_virtual_tables): Remove two trailing spaces
	from diagnostics.  Formatting fixes.

	PR target/85665
	* ipa-devirt.c (odr_types_equivalent_p): Fix grammar in
	warn_odr diagnostics.

	PR other/80058
	* lra-constraints.c (process_alt_operands): Avoid one space before
	" at the end of line and another after " on another line in a string
	literal.
	* attribs.c (handle_dll_attribute): Likewise.
	* config/avr/avr-devices.c (avr_texinfo): Likewise.

	* gimple-ssa-warn-alloca.c (pass_walloca::execute): Don't wrap
	warning_at or inform messages in G_() if there is no ?:.

	PR tree-optimization/89550
	* builtins.c (c_strlen): Only set TREE_NO_WARNING if warning_at
	returned true.  Formatting fixes.
	(expand_builtin_strnlen): Formatting fixes.
	* tree-vrp.c (vrp_prop::check_mem_ref): Only set TREE_NO_WARNING
	if warning_at returned true.
	* tree-cfg.c (pass_warn_function_return::execute): Likewise.

2019-03-08  Richard Biener  <rguenther@suse.de>

	PR middle-end/89578
	* cfgloop.h (struct loop): Add owned_clique field.
	* cfgloopmanip.c (copy_loop_info): Copy it.
	* tree-cfg.c (gimple_duplicate_bb): Do not remap owned_clique
	cliques.
	* tree-inline.c (copy_loops): Remap owned_clique.
	* lto-streamer-in.c (input_cfg): Stream owned_clique.
	* lto-streamer-out.c (output_cfg): Likewise.

2019-03-08  Jakub Jelinek  <jakub@redhat.com>

	PR target/80190
	* config/darwin.c: Include intl.h.
	(darwin_build_constant_cfstring): Improve i18n of diagnostics by not
	composing the message out of two separate parts.

2019-03-07  Jakub Jelinek  <jakub@redhat.com>

	PR target/80003
	* config/i386/i386.c (ix86_set_func_type): Make sure diagnostics
	doesn't start with a capital letter and doesn't end with a dot.
	(ix86_function_arg_boundary): Make sure diagnostics doesn't start
	with a capital letter.
	(ix86_mangle_function_version_assembler_name): Likewise.
	(ix86_generate_version_dispatcher_body): Likewise.
	(fold_builtin_cpu): Likewise.
	(get_builtin_code_for_version): Likewise.  Remove extraneous space.
	(ix86_handle_interrupt_attribute): Make the diagnostics easier for
	translators, wrap full type name in %qs.

	PR translation/79999
	* gimplify.c (gimplify_omp_ordered): Reword diagnostics to talk about
	depend clause with source (or sink) modifier.
	* omp-expand.c (expand_omp_ordered_sink): Likewise.

	PR target/89602
	* config/i386/sse.md (avx512f_mov<ssescalarmodelower>_mask,
	*avx512f_load<mode>_mask, avx512f_store<mode>_mask): New define_insns.
	(avx512f_load<mode>_mask): New define_expand.
	* config/i386/i386-builtin.def (__builtin_ia32_loadsd_mask,
	__builtin_ia32_loadss_mask, __builtin_ia32_storesd_mask,
	__builtin_ia32_storess_mask, __builtin_ia32_movesd_mask,
	__builtin_ia32_movess_mask): New builtins.
	* config/i386/avx512fintrin.h (_mm_mask_load_ss, _mm_maskz_load_ss,
	_mm_mask_load_sd, _mm_maskz_load_sd, _mm_mask_move_ss,
	_mm_maskz_move_ss, _mm_mask_move_sd, _mm_maskz_move_sd,
	_mm_mask_store_ss, _mm_mask_store_sd): New intrinsics.

2019-03-07  Martin Jambor  <mjambor@suse.cz>

	PR lto/87525
	* ipa-cp.c (perform_estimation_of_a_value): Account zero time benefit
	for extern inline functions.

2019-03-07  Martin Jambor  <mjambor@suse.cz>

	PR ipa/88235
	* cgraph.h (cgraph_node): New inline method former_thunk_p.
	* cgraph.c (cgraph_node::dump): Dump a note if node is a former thunk.
	(clone_of_p): Treat expanded thunks like thunks, be optimistic if they
	have multiple callees.  At the end check if declarations match as
	opposed to cgraph_nodes.

2019-03-07  Martin Liska  <mliska@suse.cz>

	* cgraph.c (cgraph_node::verify_node): Verify with a neighbour
	which is equivalent to searching for this in clones chain.
	* symtab.c (symtab_node::verify_base): Similarly compare ASM
	names with a neighbour and special case first node in a chain.

2019-01-25  Jason Merrill  <jason@redhat.com>

	PR c++/80916 - spurious "static but not defined" warning.
	* gimple-fold.c (can_refer_decl_in_current_unit_p): Return false
	for an internal symbol with DECL_EXTERNAL.

2019-04-07  Richard Biener  <rguenther@suse.de>

	PR middle-end/89618
	* cfgloopmanip.c (copy_loop_info): Copy forgotten fields.
	* tree-inline.c (copy_loops): Simplify.

2019-03-07  Martin Liska  <mliska@suse.cz>

	* dwarf2out.c (add_AT_vms_delta): Revert function removal.

2019-03-07  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/89595
	* tree-ssa-dom.c (dom_opt_dom_walker::optimize_stmt): Take
	stmt iterator as reference, take boolean output parameter to
	indicate whether the stmt was removed and thus the iterator
	already advanced.
	(dom_opt_dom_walker::before_dom_children): Re-iterate over
	stmts created by folding.

2019-03-07  Jakub Jelinek  <jakub@redhat.com>

	PR c++/89585
	* doc/extend.texi (Basic Asm): Document qualifiers are not allowed
	at toplevel.

2019-03-06  Peter Bergner  <bergner@linux.ibm.com>

	PR rtl-optimization/88845
	* config/rs6000/rs6000.c (rs6000_emit_move_si_sf_subreg): Enable during
	LRA.
	* lra.c (remove_scratches_1): New function.
	(remove_scratches): Use it.
	(lra_emit_move): Likewise.

2019-03-06  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc-c.def (__ARC_UNALIGNED__): Set it on
	unaligned_access variable.
	* config/arc/arc.c (arc_override_options): Set unaligned access
	default on for HS CPUs.
	* config/arc/arc.h (STRICT_ALIGNMENT): Fix logic.

2019-03-06  Martin Liska  <mliska@suse.cz>

	PR gcov-profile/89577
	* doc/gcov.texi: Prefer to use --coverage.
	* doc/sourcebuild.texi: Likewise.

2019-03-02  Jason Merrill  <jason@redhat.com>

	PR c++/86485 - -Wmaybe-unused with empty class ?:
	* gimplify.c (gimplify_cond_expr): Use INIT_EXPR.

2019-03-05  Jakub Jelinek  <jakub@redhat.com>

	PR target/89587
	* config/rs6000/t-linux (MULTIARCH_DIRNAME): Set to non-empty only
	if_multiarch.

	PR middle-end/89590
	* builtins.c (maybe_emit_free_warning): Punt if free doesn't have
	exactly one argument.

2019-03-05  Jakub Jelinek  <jakub@redhat.com>
	    Richard Sandiford  <richard.sandiford@arm.com>

	PR tree-optimization/89570
	* match.pd (vec_cond into cond_op simplification): Don't use
	get_conditional_internal_fn, use as_internal_fn (cond_op).

2019-03-05  Wilco Dijkstra  <wdijkstr@arm.com>

	PR target/89222
	* config/arm/arm.md (movsi): Use targetm.cannot_force_const_mem
	to decide when to split off a non-zero offset from a symbol.
	* config/arm/arm.c (arm_cannot_force_const_mem): Disallow offsets
	in function symbols.

2019-03-05  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/89594
	* tree-if-conv.c (pass_if_conversion::execute): Handle
	case where .LOOP_VECTORIZED_FUNCTION was removed.

2019-03-05  Jakub Jelinek  <jakub@redhat.com>

	PR bootstrap/89560
	* fold-const.c (fold_checksum_tree): Don't use fixed size buffer,
	instead alloca it only when needed with the needed size.

	PR tree-optimization/89570
	* match.pd (vec_cond into cond_op simplification): Guard with
	vectorized_internal_fn_supported_p test and #if GIMPLE.

	PR tree-optimization/89566
	* gimple-ssa-sprintf.c (sprintf_dom_walker::handle_gimple_call):
	Set info.fncode to BUILT_IN_NONE if gimple_call_builtin_p failed.
	Punt if get_user_idx_format succeeds, but idx_format argument is
	not provided or doesn't have pointer type, or if idx_args is above
	number of provided arguments.

2019-03-04  Wilco Dijkstra  <wdijkstr@arm.com>

	PR tree-optimization/89437
	* match.pd: Use lt in sin(atan(x)) and cos(atan(x)) simplifications.

2019-03-04  Richard Biener  <rguenther@suse.de>

	PR middle-end/89572
	* tree-scalar-evolution.c: (get_loop_exit_condition): Use
	safe_dyn_cast.

2019-03-04  Bin Cheng  <bin.cheng@linux.alibaba.com>

	PR tree-optimization/89487
	* tree-loop-distribution.c (has_nonaddressable_dataref_p): New.
	(create_rdg_vertices): Compute has_nonaddressable_dataref_p.
	(distribute_loop): Don't do runtime alias check if there is non-
	addressable data reference.
	* tree-ssa-loop-ivopts.c (may_be_nonaddressable_p): Check if VAR_DECL
	is a register variable.

2019-03-02  Jakub Jelinek  <jakub@redhat.com>

	PR target/89506
	* config/arm/arm.md (cmpsi2_addneg): Use
	trunc_int_for_mode (-INTVAL (...), SImode) instead of -INTVAL (...).
	If operands[2] is 0 or INT_MIN, force use of subs.
	(*compare_scc splitter): Use gen_int_mode.
	(*negscc): Likewise.
	* config/arm/thumb2.md (*thumb2_negscc): Likewise.

2019-03-01  Kito Cheng  <kito.cheng@gmail.com>
	    Monk Chiang  <sh.chiang04@gmail.com>

	* common/config/riscv/riscv-common.c: Include sstream.
	(riscv_subset_list::to_string): New.
	(riscv_arch_str): Likewise.
	* config.gcc (riscv*-*-*): Handle --with-riscv-attribute=
	* config.in: Regen.
	* config/riscv/riscv-protos.h (riscv_arch_str): New.
	* config/riscv/riscv.c (INCLUDE_STRING): Defined.
	(riscv_emit_attribute): New.
	(riscv_file_start): Emit attribute if needed.
	(riscv_option_override): Init riscv_emit_attribute_p.
	* config/riscv/riscv.opt (mriscv-attribute): New option.
	* configure.ac (riscv*-*-*): Check binutils is supporting ELF
	* configure: Regen.
	* doc/install.texi: Document --with-riscv-attribute.
	* doc/invoke.texi: Document -mriscv-attribute.

	* common/config/riscv/riscv-common.c:
	Include config/riscv/riscv-protos.h.
	(INCLUDE_STRING): Defined.
	(RISCV_DONT_CARE_VERSION): Defined.
	(riscv_subset_t): Declare.
	(riscv_subset_t::riscv_subset_t): New.
	(riscv_subset_list): Declare.
	(riscv_subset_list::riscv_subset_list): New.
	(riscv_subset_list::~riscv_subset_list): Likewise.
	(riscv_subset_list::parsing_subset_version): Likewise.
	(riscv_subset_list::parse_std_ext): Likewise.
	(riscv_subset_list::parse_sv_or_non_std_ext): Likewise.
	(riscv_subset_list::add): Likewise.
	(riscv_subset_list::lookup): Likewise.
	(riscv_subset_list::xlen): Likewise.
	(riscv_subset_list::parse): Likewise.
	(riscv_supported_std_ext): Likewise.
	(current_subset_list): Likewise.
	(riscv_parse_arch_string): Using riscv_subset_list::parse to
	parse.

2019-03-01  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.c (rs6000_option_override_internal): If
	rs6000_dejagnu_cpu_index is set, use that to override rs6000_cpu_index.
	* config/rs6000/rs6000.opt (mdejagnu-cpu=): New option.

2019-03-01  Alexander Monakov  <amonakov@ispras.ru>

	PR rtl-optimization/85899
	* haifa-sched.c (find_fallthru_edge_from): Relax assert to account for
	fallthru edges leading to the exit block.

2019-03-01  Tamar Christina  <tamar.christina@arm.com>

	PR target/89517
	* config/aarch64/aarch64-option-extensions.def (fp, simd, crypto, fp16,
	rdma, dotprod, sha2, sha3, sm4, fp16fml, sve): Collapse line.

2019-03-01  Richard Sandiford  <richard.sandiford@arm.com>

	PR tree-optimization/89535
	* tree-vect-stmts.c (vectorizable_call): Record the vector types
	for each operand.  Calculate the fallback choice for mask operands
	and pass it to vect_get_vec_def_for_operand.

2019-03-01  Richard Biener  <rguenther@suse.de>

	PR middle-end/89541
	* tree-ssa-operands.c (add_stmt_operand): CONST_DECL may
	get virtual operands.
	(get_expr_operands): Handle CONST_DECL like other decls.

2019-03-01  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/89503
	* fold-const.c (fold_checksum_tree): Ignore TREE_NO_WARNING bit
	on DECL_P and EXPR_P.

2019-03-01  Richard Biener  <rguenther@suse.de>

	PR middle-end/89497
	* tree-cfgcleanup.h (cleanup_tree_cfg): Add SSA update flags
	argument, defaulted to zero.
	* passes.c (execute_function_todo): Pass down SSA update flags
	to cleanup_tree_cfg.
	* tree-cfgcleanup.c: Include tree-into-ssa.h and tree-cfgcleanup.h.
	(cleanup_tree_cfg_noloop): After cleanup_control_flow_pre update SSA
	form if requested.
	(cleanup_tree_cfg): Get and pass down SSA update flags.

2019-03-01  Jakub Jelinek  <jakub@redhat.com>

	PR bootstrap/89539
	* dwarf2out.c (output_comdat_type_unit): Add ATTRIBUTE_UNUSED to
	early_lto_debug argument.

2019-02-28  Eric Botcazou  <ebotcazou@adacore.com>

	PR tree-optimization/89536
	* tree-ssa-dom.c (edge_info::derive_equivalences) <BIT_NOT_EXPR>: Test
	only whether bit #0 of the value is 0 instead of the entire value.

2019-02-28  Marek Polacek  <polacek@redhat.com>

	PR c++/87068 - missing diagnostic with fallthrough statement.
	* gimplify.c (expand_FALLTHROUGH_r): If IFN_FALLTHROUGH was found
	at the end of a seq, save its location to walk_stmt_info.
	(expand_FALLTHROUGH): Warn if IFN_FALLTHROUGH is at the end of
	a switch.

2019-02-28  Jan Hubicka  <hubicka@ucw.cz>

	PR lto/88585
	* tree.c (find_atomic_core_type): Move ahead in file.
	(check_base_type): Correctly compare alignments of atomic types.

2019-02-28  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89455
	* config/i386/i386.c (get_builtin_code_for_version): Identify
	Westmere from PCLMUL, instead of AES.

2019-02-28  Jakub Jelinek  <jakub@redhat.com>

	PR target/89434
	* config/arm/arm.md (*subsi3_carryin_compare_const): Use
	trunc_int_for_mode (-INTVAL (...), SImode), just instead of
	-UINTVAL (...).

2019-02-28  Tamar Christina  <tamar.christina@arm.com>

	PR target/88530
	* config/aarch64/aarch64-option-extensions.def: Document it.
	* config/aarch64/driver-aarch64.c (host_detect_local_cpu): Skip feature
	if empty hwcaps.

2019-02-28  Jakub Jelinek  <jakub@redhat.com>

	PR c/89520
	* convert.c (convert_to_real_1, convert_to_integer_1): Punt for
	builtins if they don't have a single scalar floating point argument.
	Formatting fixes.

2019-02-27  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	PR rtl-optimization/89490
	* varasm.c (get_block_for_section): Bail out for mergeable sections.
	(default_use_anchors_for_symbol_p, output_object_block): Assert the
	block section is not mergeable.

2019-02-27  Jakub Jelinek  <jakub@redhat.com>

	PR target/70341
	* config/arm/arm.md (arm_casesi_internal): New define_expand.  Rename
	old define_insn to ...
	(*arm_casesi_internal): ... this.  Add mode to LABEL_REFs.
	* config/arm/thumb2.md (thumb2_casesi_internal): New define_expand.
	Rename old define_insn to ...
	(*thumb2_casesi_internal): ... this.  Add mode to LABEL_REFs.
	(thumb2_casesi_internal_pic): New define_expand.  Rename old
	define_insn to ...
	(*thumb2_casesi_internal_pic): ... this.  Add mode to LABEL_REFs.
	* config/aarch64/aarch64.md (casesi): Create the casesi_dispatch
	MEM manually here, set MEM_READONLY_P and MEM_NOTRAP_P on it.

2019-02-27  Richard Biener  <rguenther@suse.de>

	PR debug/88878
	* dwarf2out.c (use_debug_types): Disable when in_lto_p.

2019-02-27  Richard Biener  <rguenther@suse.de>

	* passes.c (should_skip_pass_p): Do not skip cgraph-edge
	building.

2019-02-27  Richard Biener  <rguenther@suse.de>

	PR debug/88878
	* dwarf2out.c (output_comdat_type_unit): Add early_lto_debug
	parameter, prefix section name with .gnu.debuglto_ if true.
	(dwarf2out_finish): Pass false to output_comdat_type_unit.
	(dwarf2out_early_finish): Pass true to output_comdat_type_unit.

2019-02-27  Richard Biener  <rguenther@suse.de>

	PR debug/89514
	* dwarf2out.c (size_of_die): Key on AT_ref (a)->comdat_type_p
	rather than on use_debug_types, doing what output_die does.
	(value_format): Likewise.

2019-02-27  Martin Jambor  <mjambor@suse.cz>
	    Martin Sebor  <msebor@redhat.com>

	* doc/invoke.texi (Warning Options): Reword description of
	-Wno-absolute-value.

2019-02-27  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/89280
	* tree-cfgcleanup.c (maybe_dead_abnormal_edge_p,
	builtin_setjmp_setup_bb): New functions.
	(cleanup_control_flow_pre): Ignore maybe_dead_abnormal_edge_p edges.
	When visiting __builtin_setjmp_setup block, queue in special
	setjmp_vec vector edges from .ABNORMAL_DISPATCHER to corresponding
	__builtin_setjmp_receiver.  Remove .ABNORMAL_DISPATCHER basic blocks
	from visited after the loop if they don't have any visited successor
	blocks.

2018-02-26  Steve Ellcey  <sellcey@marvell.com>

	* config/aarch64/aarch64.c (aarch64_get_multilib_abi_name):
	New function.
	(TARGET_GET_MULTILIB_ABI_NAME): New macro.

2019-02-26  Jakub Jelinek  <jakub@redhat.com>

	PR c++/89507
	* tree.c (valid_constant_size_p): Deal with size INTEGER_CSTs
	with types other than sizetype/ssizetype.

2019-02-26  Eric Botcazou  <ebotcazou@adacore.com>

	* config/sparc/sparc-opts.h (enum processor_type): Rename to...
	(enum sparc_processor_type): ...this.
	(enum sparc_code_model_type): New enumeration type.
	(enum sparc_memory_model_type): Tweak comments.
	* config/sparc/sparc.opt (mcpu): Adjust to above renaming.
	(mtune): Likewise.
	(mcmodel): Use sparc_code_model enumeration and variable.
	(sparc_code_model): New enumeration.
	(mdebug): Add Undocumented marker.
	* config/sparc/sparc.h (enum cmodel): Delete.
	(sparc_cmodel): Likewise.
	(TARGET_CM_MEDLOW): Adjust to above renaming.
	(TARGET_CM_MEDMID): Likewise.
	(TARGET_CM_MEDANY): Likewise.
	(TARGET_CM_EMBMEDANY): Likewise.
	* config/sparc/sparc.c (sparc_cmodel): Delete.
	(sparc_option_override): Remove string/value mapping support for the
	code model.  Move code and memory model support to after the handling
	of target flags.  Do private machine setup last.
	(sparc_emit_set_symbolic_const64): Use sparc_code_model.
	(sparc_legitimize_reload_address): Likewise.
	(sparc_output_mi_thunk): Likewise.
	* config/sparc/sparc.md (cpu): Adjust comment to above renaming.

2019-02-26  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/89500
	* tree-ssa-strlen.c (stridx_strlenloc): Adjust comment.
	(handle_builtin_strlen): Remove noncst_bound variable.  Always
	optimize strnlen (x, 0) to 0.  Optimize strnlen (x, cst) to
	cst if the first cst bytes starting at x are known to be non-zero,
	even if the string is not zero terminated.  Don't try to modify
	*si for strnlen.  Update strlen_to_stridx only for strlen or if
	we can prove strnlen returns the same value as strlen would.

2019-02-26  Martin Liska  <mliska@suse.cz>

	* alloc-pool.h (struct pool_usage): Remove extra
	print_dash_line.
	* bitmap.h (struct bitmap_usage): Likewise.
	* ggc-common.c (struct ggc_usage): Likewise.
	* mem-stats.h (struct mem_usage): Likewise.
	(mem_alloc_description::dump): Print dash lines
	here and repeat header at the end of a table report.
	It's then more readable.
	* tree-phinodes.c (phinodes_print_statistics): Make
	horizontal alignment.
	* tree-ssanames.c (ssanames_print_statistics): Likewise.
	* vec.c (struct vec_usage): Remove extra print_dash_line.
	* vec.h (vec_safe_grow_cleared): Pass PASS_MEM_STAT.

2019-02-26  Uroš Bizjak  <ubizjak@gmail.com>

	* doc/extend.texi (__builtin_object_size):
	Use @pxref instead of @xref inside parenthesis.
	(__builtin_has_attribute): Add missing comma after @xref.
	(__builtin_object_size): Ditto.
	* doc/md.texi (cond_*{mode}): Use @samp instead of @var around op1[i].

2019-02-26  Jeff Law  <law@redhat.com>

	PR rtl-optimization/87761
	* regcprop.c (copyprop_hardreg_forward_1): Use REG_UNUSED notes to
	detect obviously dead insns and delete them.

2019-02-26  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/89505
	* tree-ssa-structalias.c (compute_dependence_clique): Make sure
	to handle restrict pointed-to vars with multiple subvars
	correctly.

2019-02-26  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/89489
	* tree-parloops.c (create_loop_fn): Copy over last_clique.

2019-02-26  Eric Botcazou  <ebotcazou@adacore.com>

	* tree-ssa-dom.c (edge_info::derive_equivalences) <BIT_IOR_EXPR>: Fix
	and move around comment.
	<BIT_AND_EXPR>: Likewise.
	<BIT_NOT_EXPR>: Add specific handling for boolean types.

2019-02-26  Jakub Jelinek  <jakub@redhat.com>

	PR target/89474
	* config/i386/i386.c (remove_partial_avx_dependency): Call
	df_analyze etc. before creation of the v4sf_const0 pseudo, rather than
	after changing possibly many instructions to use that pseudo.  Fix up
	insertion of v4sf_const0 setter at the start of bb.

2019-02-25  Sandra Loosemore  <sandra@codesourcery.com>

	PR c/80409
	* doc/extend.texi (Variadic Pointer Args): New section.

2019-02-25  Sandra Loosemore  <sandra@codesourcery.com>
	    Martin Sebor  <msebor@gmail.com>

	* common.opt (Wattribute-alias): Likewise.
	* doc/invoke.texi (Option Summary): List general form of
	-Wattribute-alias=.  List positive form of -Wmissing-attributes.
	(-Wmissing-attributes): Invert entry, rewrite and correct default.
	Add cross-references.
	(-Wattribute-alias): Rewrite and correct default.  Mention
	considered attributes (same as for -Wmissing-attributes).

2019-02-25  Paul A. Clarke  <pc@us.ibm.com>

	* config/rs6000/emmintrin.h (_mm_cvtpd_epi32): Fix big endian.
	(_mm_cvtpd_ps): Likewise.
	(_mm_cvttpd_epi32): Likewise.

	PR target/89338
	* config/rs6000/xmmintrin.h (_mm_cvtss_f32): Fix type mismatch.
	(_mm_cvt_ss2si): Fix type mismatch and 32-bit.

	PR target/89339
	* config/rs6000/xmmintrin.h (_mm_movemask_pi8): Fix 32-bit.

2019-02-25  Tamar Christina  <tamar.christina@arm.com>

	PR target/88530
	* common/config/aarch64/aarch64-common.c
	(struct aarch64_option_extension): Add is_synthetic.
	(all_extensions): Use it.
	(TARGET_OPTION_INIT_STRUCT): Define hook.
	(struct gcc_targetm_common): Moved to end.
	(all_extensions_by_on): New.
	(opt_ext_cmp, typedef opt_ext): New.
	(aarch64_option_init_struct): New.
	(aarch64_contains_opt): New.
	(aarch64_get_extension_string_for_isa_flags): Output smallest set.
	* config/aarch64/aarch64-option-extensions.def
	(AARCH64_OPT_EXTENSION): Explicitly include AES and SHA2 in crypto.
	(fp, simd, crc, lse, fp16, rcpc, rdma, dotprod, aes, sha2, sha3,
	sm4, fp16fml, sve, profile, rng, memtag, sb, ssbs, predres):
	Set is_synthetic to false.
	(crypto): Set is_synthetic to true.
	* config/aarch64/driver-aarch64.c (AARCH64_OPT_EXTENSION): Add
	SYNTHETIC.

2019-02-25  Tamar Christina  <tamar.christina@arm.com>

	* config/arm/arm_neon.h (vfmlal_low_u32, vfmlsl_low_u32,
	vfmlal_high_u32, vfmlsl_high_u32, vfmlalq_low_u32, vfmlslq_low_u32,
	vfmlalq_high_u32, vfmlslq_high_u32, vfmlal_lane_low_u32,
	vfmlal_lane_high_u32, vfmlalq_laneq_low_u32, vfmlalq_lane_low_u32,
	vfmlal_laneq_low_u32, vfmlalq_laneq_high_u32, vfmlalq_lane_high_u32,
	vfmlal_laneq_high_u32, vfmlsl_lane_low_u32, vfmlsl_lane_high_u32,
	vfmlslq_laneq_low_u32, vfmlslq_lane_low_u32, vfmlsl_laneq_low_u32,
	vfmlslq_laneq_high_u32, vfmlslq_lane_high_u32, vfmlsl_laneq_high_u32):
	Rename ...
	(vfmlal_low_f16, vfmlsl_low_f16, vfmlal_high_f16, vfmlsl_high_f16,
	vfmlalq_low_f16, vfmlslq_low_f16, vfmlalq_high_f16, vfmlslq_high_f16,
	vfmlal_lane_low_f16, vfmlal_lane_high_f16, vfmlalq_laneq_low_f16,
	vfmlalq_lane_low_f16, vfmlal_laneq_low_f16, vfmlalq_laneq_high_f16,
	vfmlalq_lane_high_f16, vfmlal_laneq_high_f16, vfmlsl_lane_low_f16,
	vfmlsl_lane_high_f16, vfmlslq_laneq_low_f16, vfmlslq_lane_low_f16,
	vfmlsl_laneq_low_f16, vfmlslq_laneq_high_f16, vfmlslq_lane_high_f16,
	vfmlsl_laneq_high_f16): ... To this.
	* config/arm/neon.md: Update comments.

2019-02-25  Tamar Christina  <tamar.christina@arm.com>

	* config/aarch64/arm_neon.h (vfmlal_low_u32, vfmlsl_low_u32,
	vfmlalq_low_u32, vfmlslq_low_u32, vfmlal_high_u32, vfmlsl_high_u32,
	vfmlalq_high_u32, vfmlslq_high_u32, vfmlal_lane_low_u32,
	vfmlsl_lane_low_u32, vfmlal_laneq_low_u32, vfmlsl_laneq_low_u32,
	vfmlalq_lane_low_u32, vfmlslq_lane_low_u32, vfmlalq_laneq_low_u32,
	vfmlslq_laneq_low_u32, vfmlal_lane_high_u32, vfmlsl_lane_high_u32,
	vfmlal_laneq_high_u32, vfmlsl_laneq_high_u32, vfmlalq_lane_high_u32,
	vfmlslq_lane_high_u32, vfmlalq_laneq_high_u32, vfmlslq_laneq_high_u32):
	Rename ...
	(vfmlal_low_f16, vfmlsl_low_f16, vfmlalq_low_f16, vfmlslq_low_f16,
	vfmlal_high_f16, vfmlsl_high_f16, vfmlalq_high_f16, vfmlslq_high_f16,
	vfmlal_lane_low_f16, vfmlsl_lane_low_f16, vfmlal_laneq_low_f16,
	vfmlsl_laneq_low_f16, vfmlalq_lane_low_f16, vfmlslq_lane_low_f16,
	vfmlalq_laneq_low_f16, vfmlslq_laneq_low_f16, vfmlal_lane_high_f16,
	vfmlsl_lane_high_f16, vfmlal_laneq_high_f16, vfmlsl_laneq_high_f16,
	vfmlalq_lane_high_f16, vfmlslq_lane_high_f16, vfmlalq_laneq_high_f16,
	vfmlslq_laneq_high_f16): ... To this.

2019-02-25  Alexander Monakov  <amonakov@ispras.ru>

	PR rtl-optimization/86096
	* df-scan.c (df_mw_compare): Do not check mw_reg fields when
	comparing mw_order values.

2019-02-25  Jakub Jelinek  <jakub@redhat.com>

	PR target/89434
	* config/arm/arm.md (*subsi3_carryin_const): Use
	arm_neg_immediate_operand predicate instead of
	arm_not_immediate_operand, "L" constraint instead of "K" and
	print it using %n2 instead of %B2.
	(*subsi3_carryin_const0): New define_insn.
	(*subsi3_carryin_compare_const): Use const_int_I_operand predicate
	instead of arm_not_operand and "I" constraint instead of "K" and
	print it using %n3 instead of %B2.  Instead of using match_dup 2 add
	another match_operand and in the condition check that it is negation
	of operands[2].
	(*subsi3_carryin_compare_const0): New define_ins.
	(*subdi_di_zesidi): Adjust to use *subsi3_carryin_const0 instead of
	*subsi3_carryin_const.
	(*arm_cmpdi_insn): Fix splitting into *subsi3_carryin_compare_const,
	split into *subsi3_carryin_compare_const0 if the highpart is zero.

	PR target/89438
	* config/arm.vfp.md (*negdf2_vfp): Use
	gen_int_mode (0x80000000, SImode) instead of GEN_INT (0x80000000).
	* config/arm/neon.md (neon_copysignf<mode>): Likewise.

2019-02-24  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/89445
	* simplify-rtx.c (simplify_ternary_operation): Don't use
	simplify_merge_mask on operands that may trap.
	* rtlanal.c (may_trap_p_1): Use FLOAT_MODE_P instead of
	SCALAR_FLOAT_MODE_P checks.  For integral division by zero, if
	second operand is CONST_VECTOR, check if any element could be zero.
	Don't expect traps for VEC_{MERGE,SELECT,CONCAT,DUPLICATE} unless
	their operands can trap.

2019-02-23  Martin Sebor  <msebor@redhat.com>

	* gimple-ssa-sprintf.c (target_strtol): Rename...
	(target_strtohwi): ...to this.  Handle values up to HOST_WIDE_INT_MAX.
	(parse_directive): Adjust to name change.  Use HOST_WIDE_INT_MAX to
	check for range error.

2019-02-23  H.J. Lu  <hongjiu.lu@intel.com>

	PR driver/69471
	* opts-common.c (prune_options): Also prune joined switches
	with Negative and RejectNegative.
	* config/i386/i386.opt (march=): Add Negative(march=).
	(mtune=): Add Negative(mtune=).
	* doc/options.texi: Document Negative used together with Joined
	and RejectNegative.

2019-02-22  Martin Sebor  <msebor@redhat.com>

	* doc/extend.texi (Other Builtins): Add
	__builtin_is_constant_evaluated.

2019-02-22  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/87609
	* tree-cfg.c (gimple_duplicate_bb): Only remap inlined cliques.

2019-02-22  Jeff Law  <law@redhat.com>

	PR rtl-optimization/87761
	* config/mips/mips.md: Add new combiner pattern to recognize
	a bitfield extraction using (ashiftrt (truncate (ashift (...)))).

2019-02-22  Matthew Malcomson  <matthew.malcomson@arm.com>

	PR target/89324
	* config/aarch64/aarch64.md: Use aarch64_general_reg predicate on
	destination register in peepholes generating patterns for ADDS/SUBS.
	(add<mode>3_compare0,
	*addsi3_compare0_uxtw, add<mode>3_compareC,
	add<mode>3_compareV_imm, add<mode>3_compareV,
	*adds_<optab><ALLX:mode>_<GPI:mode>,
	*subs_<optab><ALLX:mode>_<GPI:mode>,
	*adds_<optab><ALLX:mode>_shift_<GPI:mode>,
	*subs_<optab><ALLX:mode>_shift_<GPI:mode>,
	*adds_<optab><mode>_multp2, *subs_<optab><mode>_multp2,
	*sub<mode>3_compare0, *subsi3_compare0_uxtw,
	sub<mode>3_compare1): Allow stack pointer for source register.
	* config/aarch64/predicates.md (aarch64_general_reg): New predicate.

2019-02-22  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/88993
	PR tree-optimization/88853
	* gimple-ssa-sprintf.c (sprintf_dom_walker::call_info::is_file_func):
	New helper.
	(sprintf_dom_walker::call_info::is_string_func): New helper.
	(format_directive): Only issue "may exceed" 4095/INT_MAX warnings
	for formatted string functions.
	(sprintf_dom_walker::handle_gimple_call): Fix a typo in a comment.

2019-02-22  Martin Sebor  <msebor@redhat.com>

	PR c/89425
	* c-parser.c (sizeof_ptr_memacc_comptypes): Avoid warning in
	unreachable subexpressions.

2019-02-22  H.J. Lu  <hongjiu.lu@intel.com>
	    Hongtao Liu  <hongtao.liu@intel.com>
	    Sunil K Pandey  <sunil.k.pandey@intel.com>

	PR target/87007
	* config/i386/i386-passes.def: Add
	pass_remove_partial_avx_dependency.
	* config/i386/i386-protos.h
	(make_pass_remove_partial_avx_dependency): New.
	* config/i386/i386.c (make_pass_remove_partial_avx_dependency):
	New function.
	(pass_data_remove_partial_avx_dependency): New.
	(pass_remove_partial_avx_dependency): Likewise.
	(make_pass_remove_partial_avx_dependency): Likewise.
	* config/i386/i386.md (avx_partial_xmm_update): New attribute.
	(*extendsfdf2): Add avx_partial_xmm_update.
	(truncdfsf2): Likewise.
	(*float<SWI48:mode><MODEF:mode>2): Likewise.
	(SF/DF conversion splitters): Disabled for TARGET_AVX.

2019-02-22  Aldy Hernandez  <aldyh@redhat.com>

	PR middle-end/85598
	* gimple-ssa-sprintf.c (pass_sprintf_length::execute): Enable loop
	analysis for pass.

2019-02-22  Thiago Macieira  <thiago.macieira@intel.com>

	PR target/89444
	* config/i386/i386.h (PTA_WESTMERE): Remove PTA_AES.
	(PTA_SKYLAKE): Add PTA_AES.
	(PTA_GOLDMONT): Likewise.

2019-02-22  Sudakshina Das  <sudi.das@arm.com>

	* config/aarch64/aarch64.c (aarch64_output_mi_thunk): Add bti
	instruction if enabled.
	(aarch64_override_options): Remove reference to return address key.

2019-02-22  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/89440
	* tree-vect-loop.c (vect_create_epilog_for_reduction): Remove
	not necessary assert.

2019-02-22  Thomas Schwinge  <thomas@codesourcery.com>

	PR fortran/72741
	* omp-general.c (oacc_replace_fn_attrib): Mostly split out into...
	(oacc_replace_fn_attrib_attr): ... this new function.
	* omp-general.h (oacc_replace_fn_attrib_attr): New prototype.
	* config/nvptx/nvptx.c (nvptx_goacc_validate_dims_1): Revert workaround.

2019-02-22  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/arm/arm-cpus.in (ares): Rename to...
	(neoverse-n1): ... This.  Add ares as alias.
	* config/arm/arm-tables.opt: Regenerate.
	* config/arm/arm-tune.md: Likewise.
	* doc/invoke.txt (ARM Options): Document neoverse-n1.

2019-02-22  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/aarch64/aarch64-cores.def (neoverse-e1): Define.
	* config/aarch64/aarch64-tune.md: Regenerate.
	* doc/invoke.texi (AArch64 Options): Document neoverse-e1 -mcpu option.

2019-02-22  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/aarch64/aarch64.c (ares_tunings): Rename to...
	(neoversen1_tunings): ... This.
	* config/aarch64/aarch64-cores.def (ares): Change tuning to the above.
	(neoverse-n1): New CPU.
	* config/aarch64/aarch64-tune.md: Regenerate.
	* doc/invoke.txt (AArch64 Options): Document neoverse-n1.

2019-02-22  Richard Biener  <rguenther@suse.de>

	PR middle-end/87609
	* cfghooks.h (dependence_hash): New typedef.
	(struct copy_bb_data): New type.
	(cfg_hooks::duplicate_block): Adjust to take a copy_bb_data argument.
	(duplicate_block): Likewise.
	* cfghooks.c (duplicate_block): Pass down copy_bb_data.
	(copy_bbs): Create and pass down copy_bb_data.
	* cfgrtl.c (cfg_layout_duplicate_bb): Adjust.
	(rtl_duplicate_bb): Likewise.
	* tree-cfg.c (gimple_duplicate_bb): If the copy_bb_data arg is not NULL
	remap dependence info.

2019-02-22  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/87609
	* tree-core.h (tree_base): Document special clique values.
	* tree-inline.c (remap_dependence_clique): Do not use the
	special clique value of one.
	(maybe_set_dependence_info): Use clique one.
	(clear_dependence_clique): New callback.
	(compute_dependence_clique): Clear clique one from all refs
	before assigning it (again).

2019-02-21  Martin Sebor  <msebor@redhat.com>

	* doc/extend.texi (__clear_cache): Correct signature.

2019-02-21  Ian Lance Taylor  <iant@golang.org>

	PR go/89170
	* varasm.c (decode_addr_const): Call lookup_constant_def rather
	than output_constant_def.
	(add_constant_to_table): New static function.
	(output_constant_def): Call add_constant_to_table.
	(tree_output_constant_def): Likewise.

2019-02-21  Jakub Jelinek  <jakub@redhat.com>

	PR c++/89285
	* builtins.c (fold_builtin_arith_overflow): If first two args are
	INTEGER_CSTs, set intres and ovfres to constants rather than calls
	to ifn.

2019-02-21  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/87412
	* config/i386/i386.c (ix86_set_indirect_branch_type): Issue an
	error for -mindirect-branch/-mfunction-return with incompatible
	-fcf-protection.

2019-02-21  Jakub Jelinek  <jakub@redhat.com>

	PR bootstrap/88714
	* constraints.md (q): Remove.
	* config/arm/ldrdstrd.md (*arm_ldrd, *arm_strd): Use rk constraint
	instead of q.

2019-02-21  Martin Jambor  <mjambor@suse.cz>

	PR hsa/89302
	* omp-general.c (omp_extract_for_data): Removed a duplicate call
	to omp_adjust_for_condition, moved NE_EXPR code_cond processing...
	(omp_adjust_for_condition): ...here.  Added necessary parameters.
	* omp-general.h (omp_adjust_for_condition): Updated declaration.
	* omp-grid.c (grid_attempt_target_gridification): Adjust to pass
	proper values to new parameters of omp_adjust_for_condition.

2019-02-20  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/89412
	* expr.c (expand_assignment): If result is a MEM, use change_address
	instead of simplify_gen_subreg.

2019-02-20  Jakub Jelinek  <jakub@redhat.com>
	    David Malcolm  <dmalcolm@redhat.com>

	PR middle-end/89091
	* fold-const.c (decode_field_reference): Return NULL_TREE if
	lang_hooks.types.type_for_size returns NULL.  Check it before
	overwriting *exp_.  Use return NULL_TREE instead of return 0.

2019-02-20  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/88074
	PR middle-end/89415
	* toplev.c (do_compile): Double the emin/emax exponents to workaround
	buggy mpc_norm.

2019-02-20  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/89397
	* config/i386/i386.c (ix86_atomic_assign_expand_fenv): Check
	TARGET_SSE in addition to TARGET_SSE_MATH.

	(ix86_excess_precision): Ditto.
	(ix86_float_exceptions_rounding_supported_p): Ditto.
	(use_rsqrt_p): Ditto.
	* config/i386/sse.md (rsqrt<mode>2): Ditto.

2019-02-20  David Malcolm  <dmalcolm@redhat.com>

	PR c/89410
	* diagnostic-show-locus.c (layout::calculate_line_spans): Use
	linenum_arith_t when determining if two adjacent line spans are
	close enough to merge.
	(diagnostic_show_locus): Use linenum_arith_t when iterating over
	lines within each line_span.

2019-02-20  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	PR target/86487
	* lra-constraints.c(uses_hard_regs_p): Fix handling of
	paradoxical SUBREGS.

2019-02-20  Li Jia He  <helijia@linux.ibm.com>

	PR target/88100
	* config/rs6000/rs6000.c (rs6000_gimple_fold_builtin)
	<case ALTIVEC_BUILTIN_VSPLTISB, ALTIVEC_BUILTIN_VSPLTISH,
	ALTIVEC_BUILTIN_VSPLTISW>: Don't convert the operand before
	range checking it.

2019-02-19  Jonathan Wakely  <jwakely@redhat.com>

	* config/gcn/gcn.c (print_operand): Fix typo.

2019-02-19  Richard Biener  <rguenther@suse.de>

	PR middle-end/88074
	* toplev.c (do_compile): Initialize mpfr's exponent range
	based on available float modes.

2019-02-19  Eric Botcazou  <ebotcazou@adacore.com>

	* rtlanal.c (get_initial_register_offset): Fall back to the estimate
	as long as the epilogue isn't completed.

2019-02-18  Martin Sebor  <msebor@redhat.com>

	* doc/cpp.texi (Conditional syntax): Add __has_attribute,
	__has_cpp_attribute, and __has_include.

2019-02-18  Martin Sebor  <msebor@redhat.com>

	* doc/invoke.texi (-Wreturn-type): Correct and expand.

2019-02-18  Martin Sebor  <msebor@redhat.com>

	PR middle-end/89294
	* tree.c (valid_constant_size_p): Avoid assuming size is a constant
	expression.
	* tree.h (cst_size_error): Add the cst_size_not_constant enumerator.

2019-02-18  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/89296
	* tree-ssa-loop-ch.c (ch_base::copy_headers): Restrict setting
	of no-warning flag to cases that might emit the bogus warning.

2019-02-18  Jakub Jelinek  <jakub@redhat.com>

	PR bootstrap/88714
	* config/arm/arm.md (*arm_movdi, *movdf_soft_insn): Use "r" instead of
	"q" constraint.
	* config/arm/vfp.md (*movdi_vfp): Likewise.
	* config/arm/ldrdstrd.md (*arm_ldrd, *arm_strd): Use "r" instead of
	"q" constraint for operands[0].

	PR target/89369
	* config/s390/s390.md (*r<noxa>sbg_<mode>_srl_bitmask,
	*r<noxa>sbg_<mode>_sll, *r<noxa>sbg_<mode>_srl): Don't construct
	pattern in a temporary buffer.
	(*r<noxa>sbg_sidi_srl): Likewise.  Always use 32 as I3 rather
	than 64-operands[2].

	PR target/89361
	* config/s390/s390.c (s390_indirect_branch_attrvalue,
	s390_indirect_branch_settings): Define unconditionally.
	(s390_set_current_function): Likewise, but guard the whole body except
	the s390_indirect_branch_settings call with
	#if S390_USE_TARGET_ATTRIBUTE.
	(TARGET_SET_CURRENT_FUNCTION): Redefine unconditionally.

	* config/s390/s390.md (*<risbg_n>_ior_and_sr_ze,
	*<risbg_n>_<mode>_ior_and_lshiftrt, *<risbg_n>_sidi_ior_and_lshiftrt):
	Use HOST_WIDE_INT_M1U instead of ~(0ULL).
	(*<risbg_n>_and_subregdi_rotr, *<risbg_n>_and_subregdi_rotl): Use
	HOST_WIDE_INT_1U instead of 1ULL.
	(*pre_z10_extzv<mode>, *pre_z10_extv<mode>): Change mask type from int
	to unsigned HOST_WIDE_INT, use HOST_WIDE_INT_1U instead of 1ul.
	(*insv<mode><clobbercc_or_nocc>_appendbitsleft,
	z = (x << c) | (y >> d) splitters): Use HOST_WIDE_INT_1U
	instead of 1UL.
	(*insv<mode>_mem_reg, *insvdi_mem_reghigh): Use HOST_WIDE_INT_1U
	instead of 1ul.

2019-02-18  Martin Jambor  <mjambor@suse.cz>

	PR tree-optimization/89209
	* tree-sra.c (create_access_replacement): New optional parameter
	reg_tree.  Use it as a type if non-NULL and access type is not of
	a register type.
	(get_repl_default_def_ssa_name): New parameter REG_TYPE, pass it
	to create_access_replacement.
	(sra_modify_assign): Pass LHS type to get_repl_default_def_ssa_name.
	Check lacc is non-NULL before attempting to re-create it on the RHS.

2019-02-18  Martin Liska  <mliska@suse.cz>

	PR ipa/89306
	* cgraph.c (symbol_table::create_edge): Set m_summary_id to -1
	by default.
	(symbol_table::free_edge): Recycle m_summary_id.
	* cgraph.h (get_summary_id): New.
	(symbol_table::release_symbol): Set m_summary_id to -1
	by default.
	(symbol_table::allocate_cgraph_symbol): Recycle m_summary_id.
	* ipa-fnsummary.c (ipa_fn_summary_t): Switch from
	function_summary to fast_function_summary.
	* ipa-fnsummary.h (ipa_fn_summary_t): Likewise.
	* ipa-pure-const.c (class funct_state_summary_t):
	Switch from function_summary to fast_function_summary.
	* ipa-reference.c (class ipa_ref_var_info_summary_t): Likewise.
	(class ipa_ref_opt_summary_t): Switch from function_summary
	to fast_function_summary.
	* symbol-summary.h (class function_summary_base): New class
	that is created from base of former function_summary.
	(function_summary_base::unregister_hooks): New.
	(class function_summary): Inherit from function_summary_base.
	(class call_summary_base): New class
	that is created from base of former call_summary.
	(class call_summary): Inherit from call_summary_base.
	(struct is_same): New.
	(class fast_function_summary): New summary class.
	(class fast_call_summary): New summary class.
	* vec.h (vec_safe_grow_cleared): New function.

2019-02-18  Martin Liska  <mliska@suse.cz>

	* config/i386/i386.c (ix86_get_multilib_abi_name): New function.
	(TARGET_GET_MULTILIB_ABI_NAME): New macro defined.
	* doc/tm.texi: Document new target hook.
	* doc/tm.texi.in: Likewise.
	* target.def: Add new target macro.
	* gcc.c (find_fortran_preinclude_file): Do not search multilib
	suffixes.

2019-02-17  Alan Modra  <amodra@gmail.com>

	PR target/89271
	* config/rs6000/rs6000.md (<bd>_<mode> split): Check for an int
	output reg on add insn.
	(<bd>tf_<mode> split): Likewise.  Match predicates with insn.

2019-02-16  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89372
	* config/i386/sse.md (ssedoublemode): Remove V4HI.
	(PMULHRSW): Likewise.
	(<ssse3_avx2>_pmulhrsw<mode>3): Require TARGET_SSSE3, not
	TARGET_AVX2.
	(ssse3_pmulhrswv4hi3): New expander.

2019-02-16  H.J. Lu  <hongjiu.lu@intel.com>

	* config/i386/mmx.md (*vec_extractv2si_zext_mem): Doesn't require
	MMX.  Add isa attribute.

2019-02-16  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/66152
	* builtins.h (c_readstr): Declare.
	* builtins.c (c_readstr): Remove forward declaration.  Add
	null_terminated_p argument, if false, read all bytes from the
	string instead of stopping after '\0'.
	* expr.c (string_cst_read_str): New function.
	(store_expr): Use string_cst_read_str instead of
	builtin_strncpy_read_str.  Try to store by pieces the whole
	exp_len first, and only if that fails, split it up into
	store by pieces followed by clear_storage.  Formatting fix.

	* config/i386/i386.md (*movqi_internal): Remove static from
	buf variable.  Use output_asm_insn (buf, operands); return "";
	instead of return buf;.
	* config/i386/sse.md (<sse>_andnot<mode>3<mask_name>,
	*<code><mode>3<mask_name>, *andnot<mode>3, *andnottf3, *<code><mode>3,
	*<code>tf3, <mask_codefor><code><mode>3<mask_name>): Likewise.

2019-02-15  Eric Botcazou  <ebotcazou@adacore.com>

	* config/sparc/linux.h (ASAN_CC1_SPEC): Define.
	(CC1_SPEC): Use GNU_USER_TARGET_CC1_SPEC and ASAN_CC1_SPEC.
	* config/sparc/linux64.h (ASAN_CC1_SPEC): Likewise.
	(CC1_SPEC): Likewise.
	* config/sparc/sparc.c (sparc_asan_shadow_offset): Adjust for 64-bit.

2019-02-15  Eric Botcazou  <ebotcazou@adacore.com>

	* asan.c (asan_emit_stack_protection): Use full-sized mask to align
	the base address on 64-bit strict-alignment platforms.

2019-02-15  H.J. Lu  <hongjiu.lu@intel.com>

	* config/i386/i386.h (VALID_MMX_REG_MODE): Correct the misplaced ')'.

2019-02-15  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/darwin.h (TARGET_FPMATH_DEFAULT_P): New define.

2019-02-15  Aaron Sawdey  <acsawdey@linux.ibm.com>

	PR rtl-optimization/88308
	* shrink-wrap.c (move_insn_for_shrink_wrap): Fix LABEL_NUSES counts
	on copied instruction.

2019-02-15  Eric Botcazou  <ebotcazou@adacore.com>

	* final.c (insn_current_reference_address): Replace test on JUMP_P
	with test on jump_to_label_p.
	* config/visium/visium-passes.def: New file.
	* config/visium/t-visium (PASSES_EXTRA): Define.
	* config/visium/visium-protos.h (make_pass_visium_reorg): Declare.
	* config/visium/visium.h (TRAMPOLINE_SIZE): Adjust.
	(TRAMPOLINE_ALIGNMENT): Define.
	* config/visium/visium.c (visium_option_override): Do not register
	the machine-specific reorg pass here.
	(visium_trampoline_init): Align the BRA insn on a 64-bit boundary
	for the GR6.
	(output_branch): Adjust threshold for long branch instruction.
	* config/visium/visium.md (cpu): Move around.
	(length): Adjust for the GR6.

2019-02-15  Richard Biener  <rguenther@suse.de>
	    Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/89278
	* tree-loop-distribution.c: Include tree-eh.h.
	(generate_memset_builtin, generate_memcpy_builtin): Call
	rewrite_to_non_trapping_overflow on builtin->size before passing it
	to force_gimple_operand_gsi.

2019-02-15  Jakub Jelinek  <jakub@redhat.com>

	PR other/89342
	* optc-save-gen.awk: Handle optimize_fast like optimize_size or
	optimize_debug.
	* opth-gen.awk: Likewise.

2019-02-15  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.h (TARGET_SUBTARGET64_ISA_DEFAULT):
	Enable MMX, SSE and SSE2 by default.
	* config/i386/i386.c (ix86_option_override_internal): Do not
	explicitly set MMX, SSE and SSE2 flags for TARGET_64BIT here.

2019-02-14  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/89354
	* combine.c (make_extraction): Punt if extraction_mode is narrower
	than len bits.

2019-02-14  Maya Rashish  <coypu@sdf.org>

	* config.gcc (*-*-netbsd*): Add netbsd-d.o.
	* config/netbsd-d.c: New file.
	* config/t-netbsd: Add netbsd-d.o

2018-02-14  Steve Ellcey  <sellcey@marvell.com>

	* config/aarch64/aarch64.c (aarch64_attribute_table): Change
	affects_type_identity to true for aarch64_vector_pcs.
	(aarch64_comp_type_attributes): New function.
	(TARGET_COMP_TYPE_ATTRIBUTES): New macro.

2019-02-14  Tamar Christina  <tamar.christina@arm.com>

	PR target/88850
	* config/arm/iterators.md (ANY64): Add V4HF.

2019-02-14  Martin Liska  <mliska@suse.cz>

	PR rtl-optimization/89242
	* dce.c (delete_unmarked_insns): Call free_dominance_info we
	process a transformation.

2019-02-14  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/89314
	* fold-const.c (fold_binary_loc): Cast strlen argument to
	const char * before dereferencing it.  Formatting fixes.

	PR middle-end/89284
	* passes.def: Swap pass_ubsan and pass_early_warn_uninitialized.

2019-02-13  Ian Lance Taylor  <iant@golang.org>

	* optc-save-gen.awk: Set var_opt_hash for initial optimizations
	and set current index for other optimizations.

2019-02-13  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/sse.md (vec_set<VI4F_256_512:mode>_0): Use
	nonimmediate_operand as operand 2 predicate.
	(vec_set<VF2_512_256:mode>_0): Ditto.
	(vec_set<VI8_AVX_AVX512F:mode>_0): Ditto.
	(*vec_concatv2si): Remove alternative 2.
	(*vec_concatv4si_0): Use vm constraint for alternative 0.
	(*vec_concatv4si_0): Remove preferred_for_speed attribute.
	(vec_concatv2di): Split alternatives 4,5,6 to ...
	(*vec_concatv2di_0) ... new pattern.

2019-02-13  Wilco Dijkstra  <wdijkstr@arm.com>

	PR target/89190
	* config/arm/arm.c (ldm_stm_operation_p) Set
	addr_reg_in_reglist correctly for first register.
	(load_multiple_sequence): Remove dead base check.
	(gen_ldm_seq): Correctly set write_back for Thumb-1.

2019-02-13  Tamar Christina  <tamar.christina@arm.com>

	PR target/88847
	* config/aarch64/aarch64-sve.md (*pred_mov<mode>, pred_mov<mode>):
	Expose as @aarch64_pred_mov.
	* config/aarch64/aarch64.c (aarch64_classify_address):
	Use expand_insn which legitimizes operands.

2019-02-13  Martin Liska  <mliska@suse.cz>

	* builtins.h (expand_builtin_with_bounds): Remove declaration.
	* calls.c (struct arg_data): Remove special_slot, pointer_arg
	and pointer_offset fields.
	(initialize_argument_information): Remove usage of dead
	fields.
	* cgraph.h (struct cgraph_thunk_info): Remove
	add_pointer_bounds_args.
	* cgraphunit.c (cgraph_node::expand_thunk): Remove usage of dead
	fields.
	(cgraph_node::assemble_thunks_and_aliases): Remove usage of dead
	fields.
	* config/i386/i386.c (ix86_function_arg_advance): Remove
	unrelated comment.
	(struct builtin_isa): Remove leaf_p and nothrow_p fields.
	(def_builtin): Remove usage of dead fields.
	(ix86_add_new_builtins): Likewise.
	* ipa-fnsummary.c (compute_fn_summary): Likewise.
	* ipa-icf.c (sem_function::equals_wpa): Likewise.
	(sem_function::init): Likewise.
	(sem_variable::merge): Likewise.
	* ipa-visibility.c (function_and_variable_visibility): Likewise.
	* ipa.c (symbol_table::remove_unreachable_nodes): Likewise.
	* lto-cgraph.c (lto_output_node): Likewise.
	(lto_output_varpool_node): Likewise.
	(input_node): Likewise.
	(input_varpool_node): Likewise.
	* lto-streamer-out.c (lto_output): Likewise.
	* tree-inline.c (expand_call_inline): Remove usage of
	assign_stmts.
	* tree-inline.h (struct copy_body_data): Likewise.
	* varpool.c (varpool_node::dump): Likewise.

2019-02-13  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/89303
	* tree-ssa-structalias.c (set_uids_in_ptset): Or in vi->is_heap_var
	into pt->vars_contains_escaped_heap instead of setting
	pt->vars_contains_escaped_heap to it.

	PR middle-end/89281
	* optabs.c (prepare_cmp_insn): Use UINTVAL (size) instead of
	INTVAL (size), compare it to GET_MODE_MASK instead of
	1 << GET_MODE_BITSIZE.

	PR target/89290
	* config/i386/predicates.md (x86_64_immediate_operand): Allow
	TLS UNSPECs offsetted by signed 32-bit CONST_INT even with
	-mcmodel=large.

2019-02-13  Martin Liska  <mliska@suse.cz>

	PR lto/88858
	* cfgrtl.c (remove_barriers_from_footer): New function.
	(try_redirect_by_replacing_jump): Use it.
	(cfg_layout_redirect_edge_and_branch): Likewise.

2019-02-13  Xiong Hu Luo  <luoxhu@linux.vnet.ibm.com>

	* config/rs6000/altivec.h (vec_sbox_be, vec_cipher_be,
	vec_cipherlast_be, vec_ncipher_be, vec_ncipherlast_be): New #defines.
	* config/rs6000/crypto.md (CR_vqdi): New define_mode_iterator.
	(crypto_vsbox_<mode>, crypto_<CR_insn>_<mode>): New define_insns.
	* config/rs6000/rs6000-builtin.def (VSBOX_BE): New BU_CRYPTO_1.
	(VCIPHER_BE, VCIPHERLAST_BE, VNCIPHER_BE, VNCIPHERLAST_BE):
	New BU_CRYPTO_2.
	* config/rs6000/rs6000.c (builtin_function_type)
	<CRYPTO_BUILTIN_VSBOX_BE, CRYPTO_BUILTIN_VCIPHER_BE,
	CRYPTO_BUILTIN_VCIPHERLAST_BE, CRYPTO_BUILTIN_VNCIPHER_BE,
	CRYPTO_BUILTIN_VNCIPHERLAST_BE>: New switch options.
	* doc/extend.texi (vec_sbox_be, vec_cipher_be, vec_cipherlast_be,
	vec_ncipher_be, vec_ncipherlast_be): New builtin functions.

2019-02-12  Pat Haugen  <pthaugen@us.ibm.com>

	* doc/invoke.texi (RS/6000 and PowerPC Options): Remove duplicate
	-maltivec. Delete -maltivec=be and -maltivec=le documentation.

2019-02-12  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89229
	* config/i386/i386.md (*movoi_internal_avx): Revert revision
	268678 and revision 268657.
	(*movti_internal): Likewise.

2019-02-12  Ilya Leoshkevich  <iii@linux.ibm.com>

	PR target/89233
	* config/s390/s390.c (s390_decompose_address): Update comment.
	(s390_check_qrst_address): Reject invalid address forms after
	LRA.

2019-02-12  Martin Liska  <mliska@suse.cz>

	PR lto/88876
	* ipa-pure-const.c (propagate_pure_const): Revert hunk as
	we need default values of funct_state for a function that
	is not optimized.

2019-02-12  Eric Botcazou  <ebotcazou@adacore.com>

	* asan.c (asan_expand_mark_ifn): Take into account the alignment of
	the object to pick the size of stores on strict-alignment platforms.

	* config/sparc/sparc.md (*movsi_insn): Minor tweak.
	(*movdi_insn_sp32): Likewise.
	(*movdi_insn_sp64): Likewise.

2019-02-12  Jan Hubicka  <hubicka@ucw.cz>

	PR lto/88677
	* cgraphunit.c (analyze_functions): Clear READONLY flag for external
	types that needs constructiong.
	* tree.h (may_be_aliased): Do not check TYPE_NEEDS_CONSTRUCTING.

2019-02-12  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/89253
	* tree-ssa-loop-split.c (tree_ssa_split_loops): Check we can
	duplicate the loop.

2019-02-11  David Malcolm  <dmalcolm@redhat.com>

	PR lto/88147
	* input.c (selftest::test_line_offset_overflow): New selftest.
	(selftest::input_c_tests): Call it.

2019-02-11  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/88771
	* gimple-ssa-warn-restrict.c (pass_wrestrict::gate): Also enable
	when -Wstringop-overflow is set.
	(builtin_memref::builtin_memref): Adjust excessive upper bound
	only when lower bound is not excessive.
	(maybe_diag_overlap): Detect and diagnose excessive bounds via
	-Wstringop-ovefflow.
	(maybe_diag_offset_bounds): Rename...
	(maybe_diag_access_bounds): ...to this.
	(check_bounds_or_overlap): Adjust for name change above.

2019-02-11  Martin Sebor  <msebor@redhat.com>

	PR c++/87996
	* builtins.c (max_object_size): Move from here...
	* builtins.h (max_object_size): ...and here...
	* tree.c (max_object_size): ...to here...
	* tree.h (max_object_size): ...and here.

2019-02-11  Bill Schmidt  <wschmidt@linux.ibm.com>

	* config/rs6000/rs6000.c (rs6000_gimple_fold_builtin): Shift-right
	and shift-left vector built-ins need to include a TRUNC_MOD_EXPR
	for correct semantics.

2019-02-11  Alan Modra  <amodra@gmail.com>

	* doc/invoke.texi (man page RS/6000 and PowerPC Options): Mention
	-mlongcall and -mpltseq.
	(RS/6000 and PowerPC Options <-mlongcall>): Mention inline PLT calls.
	(RS/6000 and PowerPC Options <-mpltseq>): Document.
	* config/rs6000/rs6000.h (TARGET_PLTSEQ): Define.
	* config/rs6000/sysv4.opt (mpltseq): New option.
	* config/rs6000/sysv4.h (TARGET_PLTSEQ): Redefine.
	(SUBTARGET_OVERRIDE_OPTIONS): Error if given -mpltseq when assembler
	support is lacking.  Don't allow -mpltseq with -mbss-plt.
	* config/rs6000/linux64.h (SUBSUBTARGET_OVERRIDE_OPTIONS): Warn if
	-mpltseq given for ELFv1.
	* config/rs6000/rs6000.c (rs6000_call_aix): Comment on UNSPEC_PLTSEQ.
	Only use UNSPEC_PLTSEQ for inline PLT calls.
	(rs6000_call_sysv, rs6000_sibcall_sysv): Expand comments.  Only
	use UNSPEC_PLTSEQ for inline PLT calls.
	(rs6000_indirect_call_template_1, rs6000_longcall_ref),
	(rs6000_call_aix, rs6000_call_sysv, rs6000_sibcall_sysv): Replace
	uses of HAVE_AS_PLTSEQ with TARGET_PLTSEQ, simplifying.
	* config/rs6000/rs6000.md (pltseq_tocsave_<mode>),
	(pltseq_plt16_ha_<mode>, pltseq_plt16_lo_<mode>),
	(pltseq_mtctr_<mode>): Likewise.

2019-02-11  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

	* acinclude.m4 (gcc_AC_INITFINI_ARRAY): Use 8-byte strings with
	Solaris ld.
	* configure: Regenerate.

2019-02-11  Jakub Jelinek  <jakub@redhat.com>

	PR bootstrap/88714
	* config/arm/ldrdstrd.md (*arm_ldrd, *arm_strd): Use q constraint
	instead of r.

2019-02-11  Hans-Peter Nilsson  <hp@axis.com>

	* function.c (assign_parm_setup_block): Use the stored
	size, not the passed size, when allocating stack-space,
	also for a parameter with alignment larger than
	MAX_SUPPORTED_STACK_ALIGNMENT.

2019-02-11  Martin Liska  <mliska@suse.cz>

	PR ipa/89009
	* ipa-cp.c (build_toporder_info): Remove usage of a param.
	* ipa-inline.c (inline_small_functions): Likewise.
	* ipa-pure-const.c (propagate_pure_const): Likewise.
	(propagate_nothrow): Likewise.
	* ipa-reference.c (propagate): Likewise.
	* ipa-utils.c (struct searchc_env): Remove unused field.
	(searchc): Always search across AVAIL_INTERPOSABLE.
	(ipa_reduced_postorder): Always allow AVAIL_INTERPOSABLE as
	the only called IPA pure const can properly not propagate
	across interposable boundary.
	* ipa-utils.h (ipa_reduced_postorder): Remove param.

2019-02-11  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.md (call_internal, call_value_internal,
	sibcall_internal, sibcall_value_internal): Use SImode for mem rtx.

2019-02-11  Hans-Peter Nilsson  <hp@axis.com>

	* config/cris/cris.c (cris_preferred_minimum_alignment): Fix name
	typo.

2019-02-10  H.J. Lu  <hongjiu.lu@intel.com>

	* config/i386/constraints.md (Yd): Replace AVX512BW with AVX512DQ
	in comments

2019-02-10  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config.gcc (with_nds32_lib): Set default --with-nds32-lib correctly.

2019-02-10  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/89268
	* tree-if-conv.c (version_loop_for_if_conversion): Push to preds only
	if preds is non-NULL.

2019-02-09  Jan Hubicka  <hubicka@ucw.cz>

	PR lto/89272
	* tree.c (fld_simplified_type_name): Also keep TYPE_DECL for
	polymorphic types.

2019-02-10  Monk Chiang  <sh.chiang04@gmail.com>

	* config/nds32/nds32.md (trap): New pattern.

2019-02-10  Monk Chiang  <sh.chiang04@gmail.com>

	* config/nds32/nds32.c (nds32_dwarf_register_span): Refine register
	dwarf span.

2019-02-10  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32-md-auxiliary.c (nds32_spilt_doubleword): Support
	to split POST_INC.

2019-02-09  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-visibility.c (localize_node): Also do not localize
	LDPR_PREVAILING_DEF_IRONLY_EXP.

2019-02-09  Jan Hubicka  <hubicka@ucw.cz>

	PR lto/87957
	* tree.c (fld_simplified_type_name): Use DECL_ASSEMBLER_NAME_SET_P
	instead of type_with_linkage.

2019-02-09  Jan Hubicka  <hubicka@ucw.cz>

	PR ipa/88755
	* params.def (uninlined-function-insns, uninlined-function-time,
	uninlined-thunk-insns, uninlined-thunk-time): Add artificial upper
	bound so we don't get overflows.

2019-02-09  Aaron Sawdey  <acsawdey@linux.ibm.com>

	* config/rs6000/rs6000-string.c (expand_compare_loop,
	expand_block_compare): Insert REG_BR_PROB notes in inline expansion of
	memcmp/strncmp.

2019-02-09  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/89246
	* config/i386/i386.c (ix86_simd_clone_compute_vecsize_and_simdlen):
	If !node->definition and TYPE_ARG_TYPES is non-NULL, use
	TYPE_ARG_TYPES instead of DECL_ARGUMENTS.

2019-02-09  Alan Modra  <amodra@gmail.com>

	PR target/88343
	* config/rs6000/rs6000.c (save_reg_p): Correct calls_eh_return
	case.  Match logic in rs6000_emit_prologue emitting pic_offset_table
	setup.

2019-02-08  Vladimir Makarov  <vmakarov@redhat.com>

	PR middle-end/88560
	* lra-constraints.c (process_alt_operands): Don't increase reject
	for memory when offset memory is required.

2019-02-08  Robin Dapp  <rdapp@linux.ibm.com>

	* config/s390/vector.md: Implement vector copysign.

2019-02-08  H.J. Lu  <hongjiu.lu@intel.com>

	* expr.c (expand_constructor): Correct indentations.

2019-02-08  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/89247
	* tree-if-conv.c: Include tree-cfgcleanup.h.
	(version_loop_for_if_conversion): Record LOOP_VECTORIZED call.
	(tree_if_conversion): Pass through predicate vector.
	(pass_if_conversion::execute): Do CFG cleanup and SSA update
	inline, see if any if-converted loops we refrece in
	LOOP_VECTORIZED calls vanished and fixup.
	* tree-if-conv.h (tree_if_conversion): Adjust prototype.

2019-02-08  Ilya Leoshkevich  <iii@linux.ibm.com>

	* config/s390/constraints.md (jdd): New constraint.

2019-02-08  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89229
	* config/i386/i386.md (*movoi_internal_avx): Set mode to XI for
	upper 16 vector registers without TARGET_AVX512VL.
	(*movti_internal): Likewise.

2019-02-08  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/89234
	* except.c (copy_reg_eh_region_note_forward): Return if note_or_insn
	is a NOTE, CODE_LABEL etc. - rtx_insn * other than INSN_P.
	(copy_reg_eh_region_note_backward): Likewise.

2019-02-08  Richard Biener  <rguenther@suse.de>

	PR middle-end/89223
	* tree-data-ref.c (initialize_matrix_A): Fail if constant
	doesn't fit in HWI.
	(analyze_subscript_affine_affine): Handle failure from
	initialize_matrix_A.

2019-02-08  Jakub Jelinek  <jakub@redhat.com>

	* cfganal.c (pre_and_rev_post_order_compute_fn): Use fn instead of
	cfun everywhere.

2019-02-07  David Malcolm  <dmalcolm@redhat.com>

	PR tree-optimization/86637
	PR tree-optimization/89235
	* tree-vect-loop.c (optimize_mask_stores): Add an
	auto_purge_vect_location sentinel to ensure that vect_location is
	purged on exit.
	* tree-vectorizer.c
	(auto_purge_vect_location::~auto_purge_vect_location): New dtor.
	(try_vectorize_loop_1): Add an auto_purge_vect_location sentinel
	to ensure that vect_location is purged on exit.
	(pass_slp_vectorize::execute): Likewise, replacing the manual
	reset.
	* tree-vectorizer.h (class auto_purge_vect_location): New class.

2019-02-07  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/aarch64/iterators.md (max_opp): New code_attr.
	(USMAX): New code iterator.
	* config/aarch64/predicates.md (aarch64_smin): New predicate.
	(aarch64_smax): Likewise.
	* config/aarch64/aarch64-simd.md (abd<mode>_3): Rename to...
	(*aarch64_<su>abd<mode>_3): ... Change RTL representation to
	MINUS (MAX MIN).

2019-02-07  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89229
	* config/i386/i386.md (*movoi_internal_avx): Set mode to OI
	for TARGET_AVX512VL.
	(*movti_internal): Set mode to TI for TARGET_AVX512VL.

2019-02-07  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/s390-builtin-types.def: Add new types.
	* config/s390/s390-builtins.def: (s390_vec_xl, s390_vec_xld2)
	(s390_vec_xlw4): Make the memory operand into a const pointer.
	(s390_vec_xld2, s390_vec_xlw4): Add a variant for single precision
	float.
	* config/s390/s390-c.c (s390_expand_overloaded_builtin): Generate
	a new vector type with the alignment of the scalar memory operand.

2019-02-07  Matthew Malcomson  <matthew.malcomson@arm.com>
	    Jakub Jelinek  <jakub@redhat.com>

	PR bootstrap/88714
	* config/arm/arm-protos.h (valid_operands_ldrd_strd,
	arm_count_ldrdstrd_insns): New declarations.
	* config/arm/arm.c (mem_ok_for_ldrd_strd): Remove broken handling of
	MINUS.
	(valid_operands_ldrd_strd): New function.
	(arm_count_ldrdstrd_insns): New function.
	* config/arm/ldrdstrd.md: Change peepholes to generate PARALLEL SImode
	sets instead of single DImode set and define new insns to match this.

2019-02-07  Tamar Christina  <tamar.christina@arm.com>

	* config/aarch64/aarch64-builtins.c (aarch64_fcmla_lane_builtin_data):
	Make it a C initializer.

2019-02-07  Tamar Christina  <tamar.christina@arm.com>

	PR/target 88850
	* config/arm/neon.md (*neon_mov<mode>): Add r -> r case.

2019-02-07  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/arm/neon.md (neon_<sup>dot<vsi2qi>):
	Use neon_dot<q> for type.
	(neon_<sup>dot_lane<vsi2qi>): Likewise.

2019-02-07  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/aarch64/aarch64-simd.md (aarch64_<sur>dot<vsi2qi>):
	Use neon_dot<q> for type.
	(aarch64_<sur>dot_lane<vsi2qi>): Likewise.
	(aarch64_<sur>dot_laneq<vsi2qi>): Likewise.

2019-02-06  Vladimir Makarov  <vmakarov@redhat.com>

	PR rtl-optimization/89225
	* lra-constaints.c (simplify_operand_subreg): Add subreg mode
	sizes check.

2019-02-06  Eric Botcazou  <ebotcazou@adacore.com>

	* config/i386/i386.c (ix86_expand_prologue): Emit a memory blockage
	after restoring registers saved to allocate the frame on Windows.

2019-02-06  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/89182
	* graphite.h (cached_scalar_evolution_in_region): Declare.
	* graphite.c (struct seir_cache_key): New.
	(struct sese_scev_hash): Likewise.
	(seir_cache): New global.
	(cached_scalar_evolution_in_region): New function.
	(graphite_transform_loops): Allocate and release seir_cache.
	* graphite-isl-ast-to-gimple.c (get_rename_from_scev): Use
	cached_scalar_evolution_in_region.
	* graphite-scop-detection.c (scop_detection::can_represent_loop):
	Simplify.
	(scop_detection::graphite_can_represent_expr: Use
	cached_scalar_evolution_in_region.
	(scop_detection::stmt_simple_for_scop_p): Likewise.
	(find_params_in_bb): Likewise.
	(gather_bbs::before_dom_children): Likewise.
	* graphite-sese-to-poly.c (create_pw_aff_from_tree): Likewise.
	(add_loop_constraints): Likewise.

2019-02-06  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/89210
	* fold-const-call.c (fold_const_vec_convert): Pass true as last
	operand to new_unary_operation only if both element types are integral
	and it isn't a widening conversion.  Return NULL_TREE if
	new_unary_operation failed.

2019-02-05  Andreas Krebbel  <krebbel@linux.ibm.com>

	PR target/88856
	* config/s390/s390.md: Remove load and test FP splitter.

2019-02-05  Aaron Sawdey  <acsawdey@linux.ibm.com>

	PR target/89112
	* config/rs6000/rs6000-string.c (do_ifelse, expand_cmp_vec_sequence,
	expand_compare_loop, expand_block_compare_gpr,
	expand_strncmp_align_check, expand_strncmp_gpr_sequence): Insert
	REG_BR_PROB notes in inline expansion of memcmp/strncmp. Add
	#include "profile-count.h" and "predict.h" for types and functions
	needed to work with REG_BR_PROB notes.

2019-02-05  Aaron Sawdey  <acsawdey@linux.ibm.com>

	PR target/89112
	* config/rs6000/rs6000.md (<bd>tf_<mode>): Generate a local label
	for the long branch case.

2019-02-05  Jakub Jelinek  <jakub@redhat.com>

	PR target/89188
	* dce.c (delete_unmarked_insns): Don't remove no-op moves if they
	can throw, non-call exceptions are enabled and we can't delete
	dead exceptions or alter cfg.  Set must_clean if
	delete_insn_and_edges returns true, don't set it blindly for calls.
	Assert that delete_unreachable_blocks is called only if can_alter_cfg.

	PR rtl-optimization/89195
	* combine.c (make_extraction): For MEMs, don't extract bytes outside
	of the original MEM.

2019-02-05  Martin Liska  <mliska@suse.cz>

	PR gcov-profile/89000
	* gcov.c (function_summary): Remove argument.
	(file_summary): New function.
	(print_usage): Replace tabs with spaces.
	(generate_results): Use new function file_summary.

2019-02-05  Jakub Jelinek  <jakub@redhat.com>

	PR target/89186
	* optabs.c (prepare_cmp_insn): Pass x and y to
	emit_block_comp_via_libcall rather than XEXP (x, 0) and XEXP (y, 0).

2019-02-05  Richard Biener  <rguenther@suse.de>

	PR middle-end/89150
	* bitmap.h (struct bitmap_obstack): Do not mark GTY.
	(struct bitmap_element): Drop chain_prev so we properly recurse on
	the prev member, supporting tree views.
	(struct bitmap_head): GTY skip the obstack member.

2019-02-04  Alexander Monakov  <amonakov@ispras.ru>

	PR c/88698
	* doc/extend.texi (Vector Extensions): Add an example of using vector
	types together with x86 intrinsics.

2019-02-04  Alan Modra  <amodra@gmail.com>

	* config/rs6000/rs6000.c (rs6000_indirect_call_template_1): Increase
	str[] size to 160, and comment.

2019-02-04  Alan Modra  <amodra@gmail.com>

	* config/rs6000/rs6000.c (rs6000_indirect_call_template_1),
	(rs6000_pltseq_template): Guard output of TLS markers with
	TARGET_TLS_MARKERS.
	(rs6000_longcall_ref, rs6000_call_aix, rs6000_call_sysv),
	(rs6000_sibcall_sysv): Ignore TARGET_TLS_MARKERS when deciding
	to use inline PLT sequences.
	* config/rs6000/rs6000.md (pltseq_tocsave_<mode>),
	(pltseq_plt16_ha_<mode>, pltseq_plt16_lo_<mode>),
	(pltseq_mtctr_<mode>): Don't test TARGET_TLS_MARKERS in predicate.

2019-02-04  Martin Liska  <mliska@suse.cz>

	PR ipa/88985
	* ipa-fnsummary.c (estimate_edge_devirt_benefit): Bail
	out when ipa_fn_summaries does not contain entry for callee.

2019-02-04  Eric Botcazou  <ebotcazou@adacore.com>

	* config/sparc/sparc.h: Remove superfluous blank lines.
	* config/sparc/sparc.c (global_offset_table_rtx): Rename into...
	(got_register_rtx): ...this.
	(sparc_got): Adjust to above renaming.
	(sparc_tls_got): Likewise.
	(sparc_delegitimize_address): Likewise.
	(sparc_output_mi_thunk): Likewise.
	(sparc_init_pic_reg): Likewise.
	(save_local_or_in_reg_p): Fix test on the GOT register.
	(USE_HIDDEN_LINKONCE): Move around.
	(get_pc_thunk_name): Likewise.
	(gen_load_pcrel_sym): Likewise.
	(load_got_register): Likewise.

2019-02-04  Kito Cheng  <kito.cheng@gmail.com>

	* config/nds32/linux.h (GLIBC_DYNAMIC_LINKER): Define the naming rule
	of the dynamic linker: "ld-linux-nds32[le|be][f].so.1".

2019-02-04  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.c (nds32_legitimate_address_p): Add TLS model
	into consideration.

2019-02-04  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config.gcc (with_nds32_lib, glibc):
	Remove TARGET_DEFAULT_TLSDESC_TRAMPOLINE=0 setting.
	* config/nds32/linux.h (TARGET_DEFAULT_TLSDESC_TRAMPOLINE): Delete.
	(NDS32_TLSDESC_TRAMPOLINE_SPEC): Delete.

2019-02-03  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/89071
	* config/i386/i386.md (*sqrt<mode>2_sse): Add (v,0) alternative.
	Do not prefer (v,v) alternative for non-AVX targets and (m,v)
	alternative for speed when TARGET_SSE_PARTIAL_REG_DEPENDENCY is set.
	(*rcpsf2_sse): Ditto.
	(*rsqrtsf2_sse): Ditto.
	(sse4_1_round<mode<2): Ditto.

2019-02-03  Richard Biener  <rguenther@suse.de>

	PR debug/87295
	* dwarf2out.c (copy_ancestor_tree): Register non-stubs as
	orig.

2019-02-02  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/87887
	* config/i386/i386.c (ix86_simd_clone_compute_vecsize_and_simdlen):
	Punt with warning on aggregate return or argument types.  Ignore
	type/mode checking for uniform arguments.

2019-02-01  Segher Boessenkool  <segher@kernel.crashing.org>

	* combine.c (try_combine): Do not print "Can't combine" messages unless
	printing failed combination attempts.

2019-02-01  Martin Jambor  <mjambor@suse.cz>

	PR hsa/87863
	* omp-grid.c (grid_mark_variable_segment): Set assembler name of group
	segment and global segment variables before making them static.

2019-02-01  Martin Jambor  <mjambor@suse.cz>

	* omp-grid.c (grid_target_follows_gridifiable_pattern): Guard two
	missed optimization dump with dump_enabled_p.

2019-02-01  Richard Biener  <rguenther@suse.de>

	PR middle-end/88597
	* tree-scalar-evolution.c (analyze_scalar_evolution): Set up
	the instantiate cache.
	(instantiate_scev_binary): Elide second operand procesing
	if equal to the first.
	* tree-chrec.c (chrec_contains_symbols): Add visited set.
	(chrec_contains_undetermined): Likewise.
	(tree_contains_chrecs): Likewise.

2019-02-01  Jan Hubicka  <hubicka@ucw.cz>

	* parms.def (MAX_INLINE_INSNS_SINGLE): Reduce from 400 to 200.

2019-02-01  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/89143
	* wide-int-range.h (wide_int_range_absu): Declare.
	* wide-int-range.cc (wide_int_range_absu): New function.
	* tree-vrp.c (extract_range_from_unary_expr): Handle ABSU_EXPR.

	PR tree-optimization/88107
	* tree-cfg.c (find_outermost_region_in_block): Add ALL argument,
	instead of assertion that eh_region_outermost is non-NULL, if it
	is NULL, set *ALL to true and return NULL.
	(move_sese_region_to_fn): Adjust caller, if all is set, call
	duplicate_eh_regions with NULL region.

2019-02-01  Richard Biener  <rguenth@suse.de>

	PR rtl-optimization/88593
	* mode-switching.c (optimize_mode_switching): Free dominators before
	calling cleanup_cfg.

2019-02-01  Bin Cheng  <bin.cheng@linux.alibaba.com>

	PR tree-optimization/88932
	* tree-predcom.c (try_combine_chains): Get loop bbs in dom order.

2019-01-31  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/89137
	* omp-low.c (lower_omp_task_reductions): Drop redundant test to avoid
	bogus clang warning.

2019-01-31  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/89071
	* config/i386/i386.md (*extendsfdf2): Split out reg->reg
	alternative to avoid partial SSE register stall for TARGET_AVX.
	(truncdfsf2): Ditto.
	(sse4_1_round<mode>2): Ditto.

2018-01-31  Bill Schmidt  <wschmidt@linux.ibm.com>

	PR tree-optimization/89008
	* gimple-ssa-strength-reduction.c (slsr_process_mul): Don't
	process anything of the form X * 0.

2019-01-31  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/89135
	* tree-ssa-phiprop.c (pass_phiprop::execute): Skip blocks
	with abnormal preds.

2019-01-31  Jakub Jelinek  <jakub@redhat.com>

	PR sanitizer/89124
	* ipa-inline.c (sanitize_attrs_match_for_inline_p): Allow inlining
	always_inline callees into no_sanitize_address callers.

2019-01-31  Richard Biener  <rguenther@suse.de>

	PR rtl-optimization/89115
	* lra.c (lra_rtx_hash): Properly hash CONST_INT values.

2019-01-30  Martin Sebor  <msebor@redhat.com>

	PR other/89106
	* doc/extend.texi (cast to a union): Correct and expand.

2019-01-30  Vladimir Makarov  <vmakarov@redhat.com>

	PR rtl-optimization/87246
	* lra-constraints.c (simplify_operand_subreg): Reload memory
	in subreg if the address became invalid.

2019-01-30  Bill Schmidt  <wschmidt@linux.ibm.com>

	PR target/87064
	* config/rs6000/vsx.md (*vsx_reduc_<VEC_reduc_name>_v4sf_scalar):
	Disable for little-endian.

2019-01-30  Richard Biener  <rguenther@suse.de>

	PR rtl-optimization/89115
	* opts.c (default_options_optimization): Reduce
	PARAM_MAX_DSE_ACTIVE_LOCAL_STORES by a factor of 10 at -O1.
	Make PARAM_LOOP_INVARIANT_MAX_BBS_IN_LOOP reduction relative
	to the default.

2019-01-30  Kelvin Nilsen  <kelvin@gcc.gnu.org>

	* config/rs6000/rs6000-c.c (altivec-resolve_overloaded_builtin):
	Change handling of ALTIVEC_BUILTIN_VEC_EXTRACT.  Coerce result to
	type of vector element when vec_extract is implemented by direct
	move.

2019-01-30  Thomas Schwinge  <thomas@codesourcery.com>

	* doc/invoke.texi (C Language Options): List "-fopenacc-dim".

2019-01-30  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/89111
	* tree-ssa-loop-im.c (gather_mem_refs_stmt): Restrict
	canonicalization to appropriately sized access types.

2019-01-30  Jakub Jelinek  <jakub@redhat.com>

	PR c++/89105
	* config/i386/i386.c (ix86_warn_parameter_passing_abi): Don't warn
	for arguments to functions that are TU-local and shouldn't be
	referenced by assembly.

2019-01-30  Ulrich Drepper  <drepper@redhat.com>

	* dumpfile.c (opt_info_switch_p_1): Ignore '-' if it appears
	after '='.

2019-01-29  Martin Sebor  <msebor@redhat.com>

	PR c/88956
	* gimple-fold.c (fold_array_ctor_reference): Avoid zero-length arrays.

2019-01-29  Jakub Jelinek  <jakub@redhat.com>

	PR c++/66676
	PR ipa/89104
	* omp-simd-clone.c (simd_clone_clauses_extract)
	<case OMP_CLAUSE_ALIGNED>: Ignore clauses with NULL
	OMP_CLAUSE_ALIGNED_ALIGNMENT.

2019-01-29  Vineet Gupta  <vgupta@synopsys.com>

	* config.gcc: Force .init_array for ARC.

2019-01-29  Richard Biener  <rguenther@suse.de>

	PR debug/87295
	* dwarf2out.c (collect_skeleton_dies): New helper.
	(copy_decls_for_unworthy_types): Call it.
	(build_abbrev_table): Assert we do not try to replace
	DW_AT_signature refs with local refs.

2019-01-28  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/89002
	* gimplify.c (gimplify_omp_for): When adding OMP_CLAUSE_*_GIMPLE_SEQ
	for lastprivate/linear IV, push gimplify context around gimplify_assign
	and, if it needed any temporaries, pop it into a gimple bind around the
	sequence.

2019-01-28  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	* common.opt (-Wattribute-alias): Remove "no-" from name.
	Make -Wattribute-alias command line option and
	#pragma GCC diagnostic ignored "-Wattribute-alias" work again.

2019-01-28  Jakub Jelinek  <jakub@redhat.com>

	PR target/89073
	* doc/invoke.texi (-mclwb, -mprfchw, -mrdpid, -mrdseed, -msgx,
	-madx, -mhle, -mavx5124fmaps, -mavx512vnni, -mavx5124vnniw): Document
	x86 ISA options.
	(bmi2): Add missing @opindex.
	* doc/extend.texi (x86 target attribute): Move fma4, lwp, ssse3
	options alphabetically.  Add missing 3dnow, 3dnowa, adx, avx, avx2,
	avx5124fmaps, avx5124vnniw, avx512bitalg, avx512bw, avx512cd,
	avx512dq, avx512er, avx512f, avx512ifma, avx512pf, avx512vbmi,
	avx512vbmi2, avx512vl, avx512vnni, avx512vpopcntdq, bmi, bmi2,
	cldemote, clflushopt, clwb, clzero, crc32, cx16, f16c, fma, fsgsbase,
	fxsr, gfni, hle, lzcnt, movbe, movdir64b, movdiri, mwaitx, pconfig,
	pku, prefetchwt1, prfchw, ptwrite, rdpid, rdrnd, rdseed, rtm, sahf,
	sgx, sha, shstk, tbm, vaes, vpclmulqdq, waitpkg, wbnoinvd, xsave,
	xsavec, xsaveopt and xsaves options.

2019-01-28  Richard Biener  <rguenther@suse.de>

	PR debug/89076
	* dwarf2out.c (gen_subprogram_die): Remove leftover from MPX
	support removal.

2019-01-28  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/88739
	* tree-cfg.c (verify_types_in_gimple_reference): Verify
	BIT_FIELD_REFs only are applied to mode-precision operands
	when they are integral.
	(verify_gimple_assign_ternary): Likewise for BIT_INSERT_EXPR.
	* tree-ssa-sccvn.c (vn_reference_lookup_3): Avoid generating
	BIT_FIELD_REFs of non-mode-precision integral operands.

2019-01-27  Jakub Jelinek  <jakub@redhat.com>

	PR target/87214
	* config/i386/sse.md
	(<mask_codefor>avx512dq_shuf_<shuffletype>64x2_1<mask_name>,
	avx512f_shuf_<shuffletype>64x2_1<mask_name>): Ensure the
	first constants in pairs are multiples of 2.  Formatting fixes.
	(avx512vl_shuf_<shuffletype>32x4_1<mask_name>,
	avx512vl_shuf_<shuffletype>32x4_1<mask_name>): Ensure the
	first constants in each quadruple are multiples of 4.  Formatting fixes.

2019-01-26  Martin Jambor  <mjambor@suse.cz>

	PR ipa/88933
	* tree-inline.c: Include tree-cfgcleanup.h.
	(delete_unreachable_blocks_update_callgraph): Move...
	* tree-cfgcleanup.c (delete_unreachable_blocks_update_callgraph):
	...here, make externally visible, make second argument bool, adjust
	all callers.
	* tree-cfgcleanup.c: Include cgraph.h.
	* tree-cfgcleanup.h (delete_unreachable_blocks_update_callgraph):
	Declare.
	* ipa-prop.c: Include tree-cfgcleanup.h.
	(ipcp_transform_function): Call
	delete_unreachable_blocks_update_callgraph instead of cleaning uo CFG.

2019-01-25  Vladimir Makarov  <vmakarov@redhat.com>

	PR rtl-optimization/88846
	* ira.c (process_set_for_memref_referenced_p): New.
	(memref_referenced_p): Add new param.  Use
	process_set_for_memref_referenced_p.  Add new switch cases.
	(memref_used_between_p): Pass new arg to memref_referenced_p.

2019-01-25  Richard Earnshaw  <rearnsha@arm.com>

	PR target/88469
	* config/aarch64/aarch64.c (aarch64_function_arg_alignment): Add new
	argument ABI_BREAK.  Set to true if the calculated alignment has
	changed in gcc-9.  Check bit-fields for their base type alignment.
	(aarch64_layout_arg): Warn if argument passing has changed in gcc-9.
	(aarch64_function_arg_boundary): Likewise.
	(aarch64_gimplify_va_arg_expr): Likewise.

2019-01-25  Richard Sandiford  <richard.sandiford@arm.com>

	PR middle-end/89037
	* varasm.c (output_constructor_bitfield): Use wi::extract_uhwi
	instead of accessing TREE_INT_CST_ELT directly.

2019-01-25  Christophe Lyon  <christophe.lyon@linaro.org>

	* doc/sourcebuild.texi (Environment attributes): Add fenv and
	fenv_exceptions description.

2019-01-25  Wilco Dijkstra  <wdijkstr@arm.com>

	PR rtl-optimization/87763
	* config/aarch64/aarch64.c (aarch64_select_cc_mode):
	Allow SUBREG when matching CC_NZmode compare.

2019-01-25  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/89049
	* tree-vect-loop.c (vect_compute_single_scalar_iteration_cost):
	Look at the pattern stmt to determine if the stmt is vectorized.

2019-01-25  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-sve.md (*pred_mov<mode>)
	(pred_mov<mode>): Handle all-register forms using both a new
	alternative and a split.

2019-01-25  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/86865
	* graphite-scop-detection.c (scop_detection::can_represent_loop):
	Reject non-do-while loops.

2019-01-24  Peter Bergner  <bergner@linux.ibm.com>

	* config/rs6000/altivec.md (build_vector_mask_for_load): Use MEM_P.
	* config/rs6000/constraints.md (Q constraint): Use REG_P.
	* config/rs6000/darwin.h (PREFERRED_RELOAD_CLASS): Use SYMBOL_REF_P.
	* config/rs6000/freebsd64.h (ASM_OUTPUT_SPECIAL_POOL_ENTRY_P): Use
	SYMBOL_REF_P, CONST_INT_P and CONST_DOUBLE_P.
	* config/rs6000/linux64.h (ASM_OUTPUT_SPECIAL_POOL_ENTRY_P): Likewise.
	* config/rs6000/predicates.md (altivec_register_operand, vint_operand,
	vsx_register_operand, vsx_reg_sfsubreg_ok, vfloat_operand,
	vlogical_operand, gpc_reg_operand, int_reg_operand,
	int_reg_operand_not_pseudo): Use SUBREG_P and HARD_REGISTER_P.
	(ca_operand, base_reg_operand, htm_spr_reg_operand, cc_reg_operand,
	cc_reg_not_cr0_operand, input_operand): Use SUBREG_P.
	(save_world_operation, restore_world_operation, lmw_operation,
	stmw_operation): Use MEM_P and REG_P.
	(tie_operand): Use MEM_P.
	(vrsave_operation, crsave_operation): Use REG_P.
	(mfcr_operation, mtcrf_operation): Use REG_P and CONST_INT_P.
	(fpr_reg_operand): Use SUBREG_P and HARD_REGISTER_NUM_P.
	(quad_int_reg_operand): Use HARD_REGISTER_NUM_P.
	(call_operand): Use HARD_REGISTER_P.
	(indexed_or_indirect_operand, altivec_indexed_or_indirect_operand):
	Use CONST_INT_P.
	(lwa_operand): Use SUBREG_P, REG_P and CONST_INT_P.
	* config/rs6000/rs6000-p8swap.c (insn_is_load_p, insn_is_store_p,
	quad_aligned_load_p, replace_swapped_aligned_store,
	recombine_lvx_pattern, replace_swapped_aligned_load,
	recombine_stvx_pattern): Use MEM_P.
	(const_load_sequence_p, adjust_vperm, replace_swapped_load_constant):
	Use MEM_P and SYMBOL_REF_P.
	(rtx_is_swappable_p): Use REG_P and CONST_INT_P.
	(insn_is_swappable_p): Use REG_P and MEM_P.
	(insn_is_swap_p, (alignment_mask): Use CONST_INT_P.
	* config/rs6000/rs6000-string.c (expand_block_clear, expand_block_move):
	Use CONST_INT_P.
	* config/rs6000/rs6000.c (rs6000_secondary_reload, rs6000_emit_cmove):
	Use CONST_DOUBLE_P.
	(rs6000_output_move_128bit): Use CONST_DOUBLE_P, CONST_INT_P and
	CONST_WIDE_INT_P.
	(rs6000_legitimize_address): Use CONST_DOUBLE_P, CONST_INT_P,
	CONST_WIDE_INT_P, REG_P and SYMBOL_REF_P.
	(rs6000_emit_move): Use CONST_DOUBLE_P, CONST_INT_P, HARD_REGISTER_P,
	HARD_REGISTER_NUM_P, MEM_P, REG_P, SUBREG_P, SYMBOL_REF_P and
	reg_or_subregno:
	(output_toc): Use CONST_DOUBLE_P, CONST_INT_P and SYMBOL_REF_P.
	(easy_altivec_constant, rs6000_legitimate_offset_address_p,
	rs6000_mode_dependent_address, rs6000_expand_mtfsf_builtin,
	rs6000_expand_set_fpscr_rn_builtin, rs6000_expand_set_fpscr_drn_builtin,
	rs6000_expand_unop_builtin, INT_P, rs6000_generate_compare,
	rs6000_machopic_legitimize_pic_address, rs6000_split_logical_inner,
	rs6000_split_logical_di): Use CONST_INT_P.
	(rs6000_legitimize_reload_address): Use CONST_INT_P, HARD_REGISTER_P,
	REG_P and SYMBOL_REF_P.
	(setup_incoming_varargs, rs6000_rtx_costs): Use CONST_INT_P and MEM_P.
	(print_operand): Use CONST_INT_P, MEM_P and REG_P.
	(virtual_stack_registers_memory_p, rs6000_legitimate_address_p,
	mems_ok_for_quad_peep): Use CONST_INT_P and REG_P.
	(rs6000_secondary_reload_memory): Use CONST_INT_P and SUBREG_P.
	(small_data_operand, print_operand_address): Use CONST_INT_P and
	SYMBOL_REF_P.
	(split_stack_arg_pointer_used_p): Use HARD_REGISTER_P.
	(rs6000_init_hard_regno_mode_ok, direct_move_p):
	Use HARD_REGISTER_NUM_P.
	(rs6000_secondary_reload_gpr): Use HARD_REGISTER_NUM_P and MEM_P.
	(rs6000_secondary_reload_class): Use HARD_REGISTER_NUM_P, REG_P,
	SUBREG_P and SYMBOL_REF_P.
	(register_to_reg_type, rs6000_secondary_reload_inner): Use SUBREG_P
	and HARD_REGISTER_NUM_P.
	(rs6000_adjust_vec_address): Use HARD_REGISTER_NUM_P and
	reg_or_subregno.
	(rs6000_adjust_cost, find_mem_ref): Use MEM_P.
	(macho_lo_sum_memory_operand, rs6000_eliminate_indexed_memrefs): Use
	MEM_P and REG_P.
	(legitimate_indirect_address_p, legitimate_lo_sum_address_p,
	registers_ok_for_quad_peep, rs6000_output_function_epilogue,
	find_addr_reg): Use REG_P.
	(altivec_expand_vec_perm_const): Use REG_P and SUBREG_P.
	(rs6000_emit_le_vsx_move): Use SUBREG_P.
	(offsettable_ok_by_alignment, constant_pool_expr_p,
	legitimate_small_data_p, rs6000_output_dwarf_dtprel,
	rs6000_delegitimize_address, rs6000_const_not_ok_for_debug_p,
	rs6000_cannot_force_const_mem, rs6000_output_addr_const_extra,
	rs6000_assemble_integer, create_TOC_reference,
	rs6000_emit_allocate_stack, rs6000_xcoff_encode_section_info,
	rs6000_call_aix, rs6000_call_aix): Use SYMBOL_REF_P.
	(rs6000_split_vec_extract_var): Use reg_or_subregno.
	* config/rs6000/rtems.h (ASM_OUTPUT_SPECIAL_POOL_ENTRY_P): Use
	CONST_DOUBLE_P, CONST_INT_P and SYMBOL_REF_P.
	* config/rs6000/sysv4.h (ASM_OUTPUT_SPECIAL_POOL_ENTRY_P): Likewise.
	* config/rs6000/xcoff.h (ASM_OUTPUT_SPECIAL_POOL_ENTRY_P): Likewise.
	* config/rs6000/rs6000.h (RS6000_SYMBOL_REF_TLS_P): Use SYMBOL_REF_P.
	(REGNO_OK_FOR_INDEX_P, REGNO_OK_FOR_BASE_P): Use HARD_REGISTER_NUM_P.
	(INT_REG_OK_FOR_INDEX_P, INT_REG_OK_FOR_BASE_P): Use HARD_REGISTER_P.
	(CONSTANT_ADDRESS_P): Use CONST_INT_P and SYMBOL_REF_P.
	* config/rs6000/rs6000.md (define_expands strlensi, mod<mode>3
	and cbranch<mode>4): Use CONST_INT_P.
	(multiple define_splits): Use REG_P and SUBREG_P.
	(define_expands call, call_value): Use MEM_P.
	(define_expands sibcall, sibcall_value): Use CONST_INT_P and  MEM_P.
	(define insn *mtcrfsi): Use CONST_INT_P and REG_P.
	* config/rs6000/vsx.md (*vsx_le_perm_load_<mode>,
	*vsx_le_perm_load_v8hi, *vsx_le_perm_load_v16qi): Use HARD_REGISTER_P
	and HARD_REGISTER_NUM_P.
	(multiple define_splits): Use HARD_REGISTER_NUM_P.

2019-01-24  Uroš Bizjak  <ubizjak@gmail.com>

	PR rtl-optimization/88948
	* rtl.h (prepare_copy_insn): New prototype.
	* gcse.c (prepare_copy_insn): New function, split out from
	process_insert_insn.
	(process_insert_insn): Use prepare_copy_insn.
	* store-motion.c (replace_store_insn): Use prepare_copy_insn
	instead of gen_move_insn.

2019-01-24  Jakub Jelinek  <jakub@redhat.com>

	PR debug/89006
	* config/i386/i386.c (ix86_pic_register_p): Return true for
	UNSPEC_SET_GOT too.

	PR tree-optimization/88964
	* gimple-loop-interchange.cc (loop_cand::analyze_induction_var): Also
	punt if HONOR_SNANS (chrec).

	PR middle-end/89015
	* tree-nested.c (convert_nonlocal_reference_stmt,
	convert_local_reference_stmt, convert_tramp_reference_stmt,
	convert_gimple_call) <case GIMPLE_OMP_TEAMS>: Treat
	gimple_omp_teams_host teams stmts like GIMPLE_OMP_PARALLEL
	or GIMPLE_OMP_TASK.

	PR tree-optimization/89027
	* tree-inline.c (add_clobbers_to_eh_landing_pad): Don't add clobbers
	for "omp simd array" variables.

2019-01-24  Richard Earnshaw  <rearnsha@arm.com>

	PR target/88469
	* profile-count.h (profile_count): On ARM systems using GCC 6/7/8
	force the alignment of m_val.

2019-01-24  Richard Biener  <rguenther@suse.de>

	PR lto/87187
	* tree-streamer-out.c (write_ts_decl_common_tree_pointers):
	When in "legacy" debug mode make sure to reset self-origins.

2019-01-24  Martin Liska  <mliska@suse.cz>

	PR gcov-profile/88994
	* gcov-io.c (mangle_path): Do not allocate a bigger buffer,
	result will be always smaller or equal to the original.
	* gcov.c (mangle_name): Fix else branch where we should
	also copy to PTR and shift the pointer.

2019-01-24  Xiong Hu Luo  <luoxhu@linux.vnet.ibm.com>

	* tree-ssa-dom.c (test_for_singularity): Fix a comment typo.
	* vr-values.c (find_case_label_ranges): Fix a comment typo.

2019-01-23  Xuepeng Guo  <xuepeng.guo@intel.com>

	* common/config/i386/i386-common.c
	(OPTION_MASK_ISA_ENQCMD_SET,
	OPTION_MASK_ISA_ENQCMD_UNSET): New macros.
	(ix86_handle_option): Handle -menqcmd.
	* config.gcc (enqcmdintrin.h): New header file.
	* config/i386/cpuid.h (bit_ENQCMD): New bit.
	* config/i386/driver-i386.c (host_detect_local_cpu): Handle
	-menqcmd.
	* config/i386/i386-builtin-types.def ((INT, PVOID, PCVOID)): New
	function type.
	* config/i386/i386-builtin.def (__builtin_ia32_enqcmd,
	__builtin_ia32_enqcmds): New builtins.
	* config/i386/i386-c.c (__ENQCMD__): New macro.
	* config/i386/i386-option.c (ix86_target_string): Add
	-menqcmd.
	(ix86_valid_target_attribute_inner_p): Likewise.
	* config/i386/i386-expand.c
	(ix86_expand_builtin): Expand IX86_BUILTIN_ENQCMD and
	IX86_BUILTIN_ENQCMDS.
	* config/i386/i386.h (TARGET_ENQCMD): New.
	* config/i386/i386.md (UNSPECV_ENQCMD, UNSPECV_ENQCMDS): New.
	(@enqcmd<enqcmd_sfx>_<mode>): New insn pattern.
	(movdir64b_<mode>): Parameterize to enable share expansion code
	with ENQCMD in function ix86_expand_builtin.
	* config/i386/i386.opt: Add -menqcmd.
	* config/i386/immintrin.h: Include enqcmdintrin.h.
	* config/i386/enqcmdintrin.h: New intrinsic file.
	* doc/invoke.texi: Add -menqcmd.

2019-01-23  Bin Cheng  <bin.cheng@arm.com>
	    Steve Ellcey  <sellcey@marvell.com>

	PR target/85711
	* recog.c (address_operand): Return false on wrong mode for address.
	(constrain_operands): Check for mode with 'p' constraint.

2019-01-23  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/88998
	* config/i386/sse.md (sse2_cvtpi2pd): Add SSE alternatives.
	Disparage MMX alternative.
	(sse2_cvtpd2pi): Ditto.
	(sse2_cvttpd2pi): Ditto.

2019-01-23  David Malcolm  <dmalcolm@redhat.com>

	PR driver/89014
	* config/aarch64/driver-aarch64.c (host_detect_local_cpu): Fix
	use-after-free of the result of
	aarch64_get_extension_string_for_isa_flags.

2019-01-23  Jakub Jelinek  <jakub@redhat.com>

	PR c/44715
	* doc/extend.texi: Document break and continue behavior in
	statement expressions.

2019-01-23  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/89008
	* tree-ssa-reassoc.c (eliminate_using_constants): For * 0 do
	not leave another stray operand.

2019-01-23  Jakub Jelinek  <jakub@redhat.com>

	* BASE-VER: Bump to 9.0.1.

2019-01-23  Eric Botcazou  <ebotcazou@adacore.com>

	* cgraphunit.c (cgraph_node::expand_thunk): When expanding a GIMPLE
	thunk that returns by reference, use the type of the return object
	of the thunk instead of that of the alias to build the dereference.

2019-01-23  Vineet Gupta  <vgupta@synopsys.com>

	* config/arc/atomic.md: Add operand to DMB instruction.

2019-01-23  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/88964
	* gimple-loop-interchange.cc (loop_cand::analyze_induction_var): Use
	build_zero_cst instead of build_int_cst.  Return false for loop
	invariants which honor signed zeros.

2019-01-22  Segher Boessenkool  <segher@kernel.crashing.org>

	* doc/invoke.texi (-fsplit-paths): This is enabled by default at -O3.

2019-01-22  Jakub Jelinek  <jakub@redhat.com>

	PR target/88965
	* config/rs6000/rs6000.c: Include tree-vrp.h and tree-ssanames.h.
	(rs6000_gimple_fold_builtin): If MEM_REF address doesn't satisfy
	is_gimple_mem_ref_addr predicate, force it into a SSA_NAME first.

	PR middle-end/88968
	* gimplify.c (gimplify_omp_atomic): Handle bitfield atomics with
	non-integral DECL_BIT_FIELD_REPRESENTATIVEs.

	PR target/87064
	* config/rs6000/vsx.md (*vsx_reduc_<VEC_reduc_name>_v2df_scalar):
	Disable for little endian.

2019-01-22  Richard Earnshaw  <rearnsha@arm.com>

	PR target/88469
	* config/arm/arm.c (arm_needs_double_word_align): Check
	DECL_BIT_FIELD_TYPE.

2019-01-22  Hongtao Liu  <hongtao.liu@intel.com>
	    H.J. Lu  <hongjiu.lu@intel.com>

	PR target/88909
	* config/i386/i386-builtin.def: Add mask2 to all builtin
	initializations.  Merge ARGS2 and SPECIAL_ARGS2 into ARGS and
	SPECIAL_ARGS.
	* config/i386/i386.c (BDESC): Add mask2 to the definition.
	(BDESC_FIRST): Likewise.
	(define_builtin): Add an argument for mask2.  Updated to handle
	both ix86_isa_flags and ix86_isa_flags2.
	(define_builtin_const): Likewise.
	(define_builtin_pure): Likewise.
	(define_builtin2): Deleted.
	(define_builtin_const2): Likewise.
	(builtin_description): Add a member, mask2.
	(bdesc_*): Add mask2 to builtin initializations.
	(ix86_init_mmx_sse_builtins): Update calls to def_builtin,
	def_builtin_const and def_builtin_pure.  Remove SPECIAL_ARGS2
	support.
	(ix86_get_builtin_func_type): Remove SPECIAL_ARGS2 support.

2019-01-22  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/88954
	* config/i386/i386.c (ix86_force_load_from_GOT_p): Also check
	noplt attribute.

2019-01-22  Richard Earnshaw  <rearnsha@arm.com>

	PR target/88469
	* config/arm/arm.c (arm_needs_doubleword_align): Return 2 if a record's
	alignment is dominated by a bitfield with 64-bit aligned base type.
	(arm_function_arg): Emit a warning if the alignment has changed since
	earlier GCC releases.
	(arm_function_arg_boundary): Likewise.
	(arm_setup_incoming_varargs): Likewise.

2019-01-22  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/88862
	* graphite-scop-detection.c
	(scop_detection::graphite_can_represent_scev): Reject ADDR_EXPR.

2019-01-22  Andrew Stubbs  <ams@codesourcery.com>

	* doc/extend.tex (AMD GCN Function Attributes): New section.
	* doc/install.texi (amdgcn-unknown-amdhsa): New instructions.
	* doc/invoke.texi (AMD GCN Options): New section.
	* doc/md.texi (Constraints for Particular Machines): Add AMD GCN.

2019-01-22  Eric Botcazou  <ebotcazou@adacore.com>

	* config/sparc/sparc.c (parc_delegitimize_address): Recognize the GOT
	register and decoded HIGH/LO_SUM combinations for labels in PIC mode.

2019-01-22  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/88044
	* tree-ssa-loop-niter.c (number_of_iterations_cond): If condition
	is false in the first iteration, but !every_iteration, return false
	instead of true with niter->niter zero.

	PR rtl-optimization/88904
	* cfgcleanup.c (thread_jump): Verify cond2 doesn't mention
	any nonequal registers before processing BB_END (b).

	PR target/88905
	* optabs.c (add_equal_note): Add op0_mode argument, use it instead of
	GET_MODE (op0).
	(expand_binop_directly, expand_doubleword_clz,
	expand_doubleword_popcount, expand_ctz, expand_ffs,
	expand_unop_direct, maybe_emit_unop_insn): Adjust callers.

	PR rtl-optimization/49429
	PR target/49454
	PR rtl-optimization/86334
	PR target/88906
	* expr.c (emit_block_move_hints): Move marking of MEM_EXPRs
	addressable from here...
	(emit_block_op_via_libcall): ... to here.

2019-01-22  Richard Biener  <rguenther@suse.de>

	* tree-vect-loop.c (vect_analyze_loop_operations): Use
	auto_vec for cost vector to fix memleak.
	(vectorize_fold_left_reduction): Properly gather SLP defs.
	(vectorizable_comparison): Do not swap operands to properly
	gather SLP defs.

2019-01-22  Alan Modra  <amodra@gmail.com>

	PR target/88614
	* config/rs6000/predicates.md (unspec_tls): Ensure GOT reg
	stays a reg.  Allow a const_int.
	* config/rs6000/rs6000-protos.h (rs6000_output_tlsargs): Declare.
	* config/rs6000/rs6000.h (IS_V4_FP_ARGS): Define.
	(IS_NOMARK_TLSGETADDR): Define.
	* config/rs6000/rs6000.c (edit_tls_call_insn): Delete.
	(rs6000_output_tlsargs): New function.
	(rs6000_legitimize_tls_address): Don't say a !TARGET_TLS_MARKERS
	__tls_get_addr call takes an arg.
	(rs6000_call_sysv): Generate sysv4 secure plt call pattern here..
	* config/rs6000/rs6000.md (call_nonlocal_sysv): ..rather than here,
	delete split..
	(call_value_nonlocal_sysv): ..or here, delete split.
	(tls_gdld_nomark): Delete.
	(call_value_indirect_nonlocal_sysv): Use unspec_tls as operand2
	predicate.  Call rs6000_output_tlsargs.  Adjust length to suit.
	(call_value_nonlocal_sysv): Likewise.
	(call_value_nonlocal_sysv_secure): Likewise.
	(call_value_nonlocal_aix): Likewise.
	(call_value_indirect_aix): Likewise.
	(call_value_indirect_elfv2): Likewise.
	(call_value_local32, call_value_local64): Disable for no-mark tls.
	(call_value_local_aix): Likewise.

2019-01-21  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/88938
	* config/i386/i386.c (ix86_expand_builtin) [case IX86_BUILTIN_BEXTRI32,
	case IX86_BUILTIN_BEXTRI64]: Sanitize operands.

2019-01-21  Michael Ploujnikov  <michael.ploujnikov@oracle.com>

	* hash-map-tests.c (test_map_of_strings_to_int): Show how to use
	string contents as hash_map keys.

2019-01-21  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	PR c/88928
	* c-warn.c (check_alignment_of_packed_member): Add a boolean parameter
	for rvalue context.  Handle rvalues correctly.  Use min_align_of_type
	instead of TYPE_ALIGN.
	(check_address_or_pointer_of_packed_member): Handle rvalues coorrectly.
	Use min_align_of_type instead of TYPE_ALIGN_UNIT.  Check for NULL
	pointer from TYPE_STUB_DECL.

2019-01-21  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/88934
	* tree-vect-slp.c (vect_mask_constant_operand_p): Always look
	at the possibly non-constant operand.
	(vect_get_constant_vectors): Adjust.

2019-01-21  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/71659
	* config/i386/adxintrin.h: Just check _IMMINTRIN_H_INCLUDED.
	* config/i386/clflushoptintrin.h: Check _IMMINTRIN_H_INCLUDED
	instead of _X86INTRIN_H_INCLUDED.
	* onfig/i386/clwbintrin.h: Likewise.
	* config/i386/pkuintrin.h: Likewise.
	* config/i386/prfchwintrin.h: Likewise.
	* config/i386/rdseedintrin.h: Likewise.
	* config/i386/wbnoinvdintrin.h: Likewise.
	* config/i386/xsavecintrin.h: Likewise.
	* config/i386/xsavesintrin.h: Likewise.
	* config/i386/fxsrintrin.h: Enable _IMMINTRIN_H_INCLUDED check.
	* config/i386/xsaveintrin.h: Likewise.
	* config/i386/xsaveoptintrin.h: Likewise.
	* config/i386/x86intrin.h: Move "#include" <rdseedintrin.h>,
	<prfchwintrin.h>, <fxsrintrin.h>, <xsaveintrin.h>,
	<xsaveoptintrin.h>, <adxintrin.h>, <clwbintrin.h>,
	<clflushoptintrin.h>, <xsavesintrin.h>, <xsavecintrin.h>,
	<wbnoinvdintrin.h> and <pkuintrin.h> to ...
	* config/i386/immintrin.h: Here.

2019-01-20  Martin Jambor  <mjambor@suse.cz>

	PR ipa/87615
	* ipa-prop.h (struct ipa_func_body_info): Replaced field aa_walked
	with aa_walk_budget.
	* cgraph.h (ipa_polymorphic_call_context::get_dynamic_type): Add
	aa_walk_budget_p parameter.
	* ipa-fnsummary.c (unmodified_parm_1): New parameter fbi.  Limit AA
	walk.  Updated all callers.
	(unmodified_parm): New parameter fbi, pass it to unmodified_parm_1.
	(eliminated_by_inlining_prob): New parameter fbi, pass it on to
	unmodified_parm.
	(will_be_nonconstant_expr_predicate): New parameter fbi, removed
	parameter info.  Extract info from fbi.  Pass fbi to recursive calls
	and to unmodified_parm.
	(phi_result_unknown_predicate): New parameter fbi, removed parameter
	info, updated call to will_be_nonconstant_expr_predicate.
	(param_change_prob): New parameter fbi, limit AA walking.
	(analyze_function_body): Initialize aa_walk_budget in fbi.  Update
	calls to various above functions.
	* ipa-polymorphic-call.c (get_dynamic_type): Add aa_walk_budget_p
	parameter.  Use it to limit AA walking.
	* ipa-prop.c (detect_type_change_from_memory_writes): New parameter
	fbi, limit AA walk.
	(detect_type_change): New parameter fbi, pass it on to
	detect_type_change_from_memory_writes.
	(detect_type_change_ssa): Likewise.
	(aa_overwalked): Removed.
	(parm_preserved_before_stmt_p): Assume fbi is never NULL, stream line
	accordingly, adjust to the neew AA limiting scheme.
	(parm_ref_data_preserved_p): Likewise.
	(ipa_compute_jump_functions_for_edge): Adjust call to
	get_dynamic_type.
	(ipa_analyze_call_uses): Likewise.
	(ipa_analyze_virtual_call_uses): Pass fbi to detect_type_change_ssa.
	(ipa_analyze_node): Initialize aa_walk_budget.
	(ipcp_transform_function): Likewise.
	* tree-ssa-sccvn.c (eliminate_dom_walker::eliminate_stmt): Update call
	to get_dynamic_type.

2019-01-19  Jakub Jelinek  <jakub@redhat.com>

	* config/aarch64/aarch64.c (aarch64_stack_protect_guard): Move
	outside of #if CHECKING_P code.

2019-01-19  Richard Sandiford  <richard.sandiford@arm.com>

	* gimple-loop-versioning.cc (loop_versioning::dump_inner_likelihood):
	New function, split out from...
	(loop_versioning::analyze_stride): ...here.
	(loop_versioning::find_per_loop_multiplication): Use gassign.
	(loop_versioning::analyze_term_using_scevs): Return a success code.
	(loop_versioning::analyze_arbitrary_term): New function.
	(loop_versioning::analyze_address_fragment): Use
	analyze_arbitrary_term if all else fails.

2019-01-18  Segher Boessenkool  <segher@kernel.crashing.org>

	PR target/88892
	* config/rs6000/rs6000.md (*movsi_from_df): Allow only register
	operands.

2019-01-18  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/88903
	* tree-vect-stmts.c (vectorizable_shift): Verify we see all
	scalar stmts a SLP shift amount is composed of when detecting
	shifts by scalars.

2019-01-18  Richard Earnshaw  <rearnsha@arm.com>

	PR target/88799
	* config/arm/arm-cpus.in (mp): New feature.
	(sec): New feature.
	(fgroup ARMv7ve): Add mp and sec features.
	(arch armv7-a): Add options to allow mp and sec extensions.
	(cpu generic-armv7-a): Add options to allow mp and sec extensions.
	(cpu cortex-a5, cpu cortex-7, cpu cortex-a9): Add mp and sec
	extenstions to the base architecture.
	(cpu cortex-a8): Add sec extension to the base architecture.
	(cpu marvell-pj4): Add mp and sec extensions to the base architecture.
	* config/arm/t-aprofile (MULTILIB_MATCHES): Map all armv7-a arch
	variants down to the base v7-a varaint.
	* config/arm/t-multilib (v7_a_arch_variants): New variable.
	* doc/invoke.texi (ARM Options): Add +mp and +sec to the list
	of permitted extensions for -march=armv7-a and for
	-mcpu=generic-armv7-a.

2019-01-18  Martin Liska  <mliska@suse.cz>

	* params.def: Fix comment.
	* tree-profile.c (gimple_init_gcov_profiler): Bump function
	name.
	(gimple_gen_ic_func_profiler): Likewise.

2019-01-18  Ramana Radhakrishnan  <ramana.radhakrishnan@arm.com>

	* config/aarch64/aarch64-opts.h (enum stack_protector_guard): New
	* config/aarch64/aarch64.c (aarch64_override_options_internal): Handle
	and put in error checks for stack protector guard options.
	(aarch64_stack_protect_guard): New.
	(TARGET_STACK_PROTECT_GUARD): Define.
	* config/aarch64/aarch64.md (UNSPEC_SSP_SYSREG): New.
	(reg_stack_protect_address<mode>): New.
	(stack_protect_set): Adjust for SSP_GLOBAL.
	(stack_protect_test): Likewise.
	* config/aarch64/aarch64.opt (-mstack-protector-guard-reg): New.
	(-mstack-protector-guard): Likewise.
	(-mstack-protector-guard-offset): Likewise.

2019-01-18  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/86214
	* tree-inline.h (struct copy_body_data): Add
	add_clobbers_to_eh_landing_pads member.
	* tree-inline.c (add_clobbers_to_eh_landing_pad): New function.
	(copy_edges_for_bb): Call it if EH edge destination is <
	id->add_clobbers_to_eh_landing_pads.  Fix a comment typo.
	(expand_call_inline): Set id->add_clobbers_to_eh_landing_pads
	if flag_stack_reuse != SR_NONE and clear it afterwards.

2019-01-18  Christophe Lyon  <christophe.lyon@linaro.org>

	PR target/85596
	* doc/install.texi (with-multilib-list): Document for aarch64.

2019-01-18  Jakub Jelinek  <jakub@redhat.com>

	PR target/88734
	* config/arm/arm_neon.h: Fix #pragma GCC target syntax - replace
	(("..."))) with ("...").

2019-01-18  Sebastian Huber  <sebastian.huber@embedded-brains.de>

	* doc/extend.texi (Built-in Functions for Memory Model Aware
	Atomic Operations): Document atomic fetch and nand.

2019-01-18  Martin Liska  <mliska@suse.cz>
	    Richard Biener  <rguenther@suse.de>

	PR middle-end/88587
	* cgraph.h (create_version_clone_with_body): Add new argument
	with attributes.
	* cgraphclones.c (cgraph_node::create_version_clone): Add
	DECL_ATTRIBUTES to a newly created decl.  And call
	valid_attribute_p so that proper cl_target_optimization_node
	is set for the newly created declaration.
	* multiple_target.c (create_target_clone): Set DECL_ATTRIBUTES
	for declaration.
	(expand_target_clones): Do not call valid_attribute_p, it must
	be already done.
	* tree-inline.c (copy_decl_for_dup_finish): Reset mode for
	vector types.

2019-01-17  Jakub Jelinek  <jakub@redhat.com>

	PR target/88734
	* config/aarch64/arm_neon.h: Fix #pragma GCC target syntax - replace
	(("..."))) with ("...").  Use arch=armv8.2-a+sha3 instead of
	arch=armv8.2-a+crypto for vsha512hq_u64 etc. intrinsics.

2019-01-17  Martin Sebor  <msebor@redhat.com>

	PR middle-end/88273
	* gimple-ssa-warn-restrict.c (builtin_memref::extend_offset_range):
	Handle anti-ranges the same as no range at all.

2018-01-17  Steve Ellcey  <sellcey@cavium.com>

	* config/aarch64/aarch64.c (cgraph.h): New include.
	(intl.h): New include.
	(supported_simd_type): New function.
	(currently_supported_simd_type): Ditto.
	(aarch64_simd_clone_compute_vecsize_and_simdlen): Ditto.
	(aarch64_simd_clone_adjust): Ditto.
	(aarch64_simd_clone_usable): Ditto.
	(TARGET_SIMD_CLONE_COMPUTE_VECSIZE_AND_SIMDLEN): New macro.
	(TARGET_SIMD_CLONE_ADJUST): Ditto.
	(TARGET_SIMD_CLONE_USABLE): Ditto.
	* config/i386/i386.c (ix86_simd_clone_adjust): Add definition check.
	* omp-simd-clone.c (expand_simd_clones): Add targetm.simd_clone.adjust
	call.

2019-01-17  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/88800
	* gimple-fold.c (gimple_fold_builtin_memory_op): Avoid checking
	NO_WARNING bit here.  Avoid folding out-of-bounds calls.
	* gimple-ssa-warn-restrict.c (maybe_diag_offset_bounds): Remove
	redundant argument.  Add new argument and issue diagnostics under
	its control.  Detect out-of-bounds access even with warnings
	disabled.
	(check_bounds_or_overlap): Change return type.  Add argument.
	(wrestrict_dom_walker::check_call): Adjust.
	* gimple-ssa-warn-restrict.h (check_bounds_or_overlap): Add argument.
	* tree-ssa-strlen.c (handle_builtin_strcpy): Adjust to change in
	check_bounds_or_overlap's return value.
	(handle_builtin_stxncpy): Same.
	(handle_builtin_strcat): Same.

2019-01-17  Andrew Stubbs  <ams@codesourcery.com>
	    Kwok Cheung Yeung  <kcy@codesourcery.com>
	    Julian Brown  <julian@codesourcery.com>
	    Tom de Vries  <tom@codesourcery.com>

	* doc/sourcebuild.texi: Document dg-add-options sqrt_insn.

2019-01-17  Andrew Stubbs  <ams@codesourcery.com>

	* doc/sourcebuild.texi: Document dg-require-effective-target
	llvm_binutils and offload_gcn.

2019-01-17  Andrew Stubbs  <ams@codesourcery.com>
	    Kwok Cheung Yeung  <kcy@codesourcery.com>
	    Julian Brown  <julian@codesourcery.com>
	    Tom de Vries  <tom@codesourcery.com>

	* doc/sourcebuild.texi: Document dg-required-effective-target
	exceptions.

2019-01-17  Andrew Stubbs  <ams@codesourcery.com>
	    Kwok Cheung Yeung  <kcy@codesourcery.com>
	    Julian Brown  <julian@codesourcery.com>
	    Tom de Vries  <tom@codesourcery.com>
	    Jan Hubicka  <hubicka@ucw.cz>
	    Martin Jambor  <mjambor@suse.cz>

	* config.gcc: Add amdgcn*-*-amdhsa configuration.
	* configure.ac: Check for dlopen.
	* configure: Regenerate.

2019-01-17  Andrew Stubbs  <ams@codesourcery.com>
	    Kwok Cheung Yeung  <kcy@codesourcery.com>
	    Julian Brown  <julian@codesourcery.com>
	    Tom de Vries  <tom@codesourcery.com>
	    Jan Hubicka  <hubicka@ucw.cz>
	    Martin Jambor  <mjambor@suse.cz>

	* common/config/gcn/gcn-common.c: New file.
	* config/gcn/driver-gcn.c: New file.
	* config/gcn/gcn-builtins.def: New file.
	* config/gcn/gcn-hsa.h: New file.
	* config/gcn/gcn-modes.def: New file.
	* config/gcn/gcn-opts.h: New file.
	* config/gcn/gcn-passes.def: New file.
	* config/gcn/gcn-protos.h: New file.
	* config/gcn/gcn-run.c: New file.
	* config/gcn/gcn-tree.c: New file.
	* config/gcn/gcn.c: New file.
	* config/gcn/gcn.h: New file.
	* config/gcn/gcn.opt: New file.
	* config/gcn/t-gcn-hsa: New file.

2019-01-17  Andrew Stubbs  <ams@codesourcery.com>
	    Kwok Cheung Yeung  <kcy@codesourcery.com>
	    Julian Brown  <julian@codesourcery.com>
	    Tom de Vries  <tom@codesourcery.com>
	    Jan Hubicka  <hubicka@ucw.cz>
	    Martin Jambor  <mjambor@suse.cz>

	* config/gcn/constraints.md: New file.
	* config/gcn/gcn-valu.md: New file.
	* config/gcn/gcn.md: New file.
	* config/gcn/predicates.md: New file.

2019-01-17  Eric Botcazou  <ebotcazou@adacore.com>

	* gimple-ssa-isolate-paths.c (stmt_uses_name_in_undefined_way): Replace
	flag_non_call_exceptions with cfun->can_throw_non_call_exceptions.
	(stmt_uses_0_or_null_in_undefined_way): Likewise.
	* tree-ssa-alias.c (same_addr_size_stores_p): Likewise.

2019-01-17  Tamar Christina  <tamar.christina@arm.com>

	PR target/88851
	* config/aarch64/aarch64.md (STACK_CLASH_SVE_CFA_REGNUM): New.
	* config/aarch64/aarch64.c (aarch64_allocate_and_probe_stack_space): Use
	it and document registers.

2019-01-17  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/aarch64/aarch64.c (ares_tunings): Define.
	* config/aarch64/aarch64-cores.def (ares): Use the above.

2019-01-17  Wei Xiao  <wei3.xiao@intel.com>

	PR target/88794
	Revert:
	2018-11-06  Wei Xiao  <wei3.xiao@intel.com>

	* config/i386/avx512fintrin.h: Update VFIXUPIMM* intrinsics.
	(_mm512_fixupimm_round_pd): Update parameters and builtin.
	(_mm512_maskz_fixupimm_round_pd): Ditto.
	(_mm512_fixupimm_round_ps): Ditto.
	(_mm512_maskz_fixupimm_round_ps): Ditto.
	(_mm_fixupimm_round_sd): Ditto.
	(_mm_maskz_fixupimm_round_sd): Ditto.
	(_mm_fixupimm_round_ss): Ditto.
	(_mm_maskz_fixupimm_round_ss): Ditto.
	(_mm512_fixupimm_pd): Ditto.
	(_mm512_maskz_fixupimm_pd): Ditto.
	(_mm512_fixupimm_ps): Ditto.
	(_mm512_maskz_fixupimm_ps): Ditto.
	(_mm_fixupimm_sd): Ditto.
	(_mm_maskz_fixupimm_sd): Ditto.
	(_mm_fixupimm_ss): Ditto.
	(_mm_maskz_fixupimm_ss): Ditto.
	(_mm512_mask_fixupimm_round_pd): Update builtin.
	(_mm512_mask_fixupimm_round_ps): Ditto.
	(_mm_mask_fixupimm_round_sd): Ditto.
	(_mm_mask_fixupimm_round_ss): Ditto.
	(_mm512_mask_fixupimm_pd): Ditto.
	(_mm512_mask_fixupimm_ps): Ditto.
	(_mm_mask_fixupimm_sd): Ditto.
	(_mm_mask_fixupimm_ss): Ditto.
	* config/i386/avx512vlintrin.h:
	(_mm256_fixupimm_pd): Update parameters and builtin.
	(_mm256_maskz_fixupimm_pd): Ditto.
	(_mm256_fixupimm_ps): Ditto.
	(_mm256_maskz_fixupimm_ps): Ditto.
	(_mm_fixupimm_pd): Ditto.
	(_mm_maskz_fixupimm_pd): Ditto.
	(_mm_fixupimm_ps): Ditto.
	(_mm_maskz_fixupimm_ps): Ditto.
	(_mm256_mask_fixupimm_pd): Update builtin.
	(_mm256_mask_fixupimm_ps): Ditto.
	(_mm_mask_fixupimm_pd): Ditto.
	(_mm_mask_fixupimm_ps): Ditto.
	* config/i386/i386-builtin-types.def: Add new types and remove
	useless ones.
	* config/i386/i386-builtin.def: Update builtin definitions.
	* config/i386/i386.c: Handle new builtin types and remove useless ones.
	* config/i386/sse.md: Update VFIXUPIMM* patterns.
	(<avx512>_fixupimm<mode>_maskz<round_saeonly_expand_name>): Update.
	(<avx512>_fixupimm<mode><sd_maskz_name><round_saeonly_name>): Update.
	(<avx512>_fixupimm<mode>_mask<round_saeonly_name>): Update.
	(avx512f_sfixupimm<mode>_maskz<round_saeonly_expand_name>): Update.
	(avx512f_sfixupimm<mode><sd_maskz_name><round_saeonly_name>): Update.
	(avx512f_sfixupimm<mode>_mask<round_saeonly_name>): Update.
	* config/i386/subst.md:
	(round_saeonly_sd_mask_operand4): Add new subst_attr.
	(round_saeonly_sd_mask_op4): Ditto.
	(round_saeonly_expand_operand5): Ditto.
	(round_saeonly_expand): Update.

2019-01-17  Wei Xiao  <wei3.xiao@intel.com>

	PR target/88794
	Revert:
	2018-11-12  Wei Xiao  <wei3.xiao@intel.com>

	* config/i386/sse.md: Combine VFIXUPIMM* patterns
	(<avx512>_fixupimm<mode>_maskz<round_saeonly_expand_name>): Update.
	(<avx512>_fixupimm<mode><sd_maskz_name><round_saeonly_name>): Update.
	(<avx512>_fixupimm<mode>_mask<round_saeonly_name>): Remove.
	(avx512f_sfixupimm<mode>_maskz<round_saeonly_expand_name>): Update.
	(avx512f_sfixupimm<mode><sd_maskz_name><round_saeonly_name>): Update.
	(avx512f_sfixupimm<mode>_mask<round_saeonly_name>): Remove.

2019-01-17  Wei Xiao  <wei3.xiao@intel.com>

	PR target/88794
	Revert:
	2018-12-15  Jakub Jelinek  <jakub@redhat.com>

	PR target/88489
	* config/i386/sse.md (UNSPEC_SFIXUPIMM): New unspec enumerator.
	(avx512f_sfixupimm<mode><mask_name><round_saeonly_name>): Use it
	instead of UNSPEC_FIXUPIMM.

2019-01-17  Richard Biener  <rguenther@suse.de>

	PR lto/86736
	* dwarf2out.c (want_pubnames): Never generate pubnames sections
	and friends for the LTO part of debug info.

2019-01-17  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/86214
	* cfgexpand.c (add_stack_var_conflict): Don't add any conflicts
	if x == y.

	PR rtl-optimization/88870
	* dce.c (deletable_insn_p): Never delete const/pure calls that can
	throw if we can't alter the cfg or delete dead exceptions.
	(mark_insn): Don't call find_call_stack_args for such calls.

2019-01-17  Kewen Lin  <linkw@gcc.gnu.org>

	* doc/extend.texi: Add four new prototypes for vec_ld and seven new
	prototypes for vec_st.
	* config/rs6000/rs6000-c.c (altivec_overloaded_builtins): Add entries
	for scalar address type variants of altivec_vec_ld/altivec_vec_st,
	mainly on signed/unsigned long long and double.

2019-01-16  David Malcolm  <dmalcolm@redhat.com>

	PR target/88861
	* combine.c (delete_noop_moves): Convert to "bool" return,
	returning true if any edges are eliminated.
	(combine_instructions): Also return true if delete_noop_moves
	returns true.

2019-01-16  Tamar Christina  <tamar.christina@arm.com>

	* config/aarch64/aarch64-builtins.c (aarch64_simd_expand_args): Use
	correct max nunits for endian swap.
	(aarch64_expand_fcmla_builtin): Correct subreg code.
	* config/aarch64/aarch64-simd.md (aarch64_fcmla_lane<rot><mode>,
	aarch64_fcmla_laneq<rot>v4hf, aarch64_fcmlaq_lane<rot><mode>): Correct
	lane endianness.

2019-01-16  Uroš Bizjak  <ubizjak@gmail.com>

	* config/alpha/alpha.c (alpha_gimplify_va_arg):
	Handle split indirect COMPLEX_TYPE arguments.

2019-01-16  Richard Earnshaw  <rearnsha@arm.com>

	PR target/86891
	* config/aarch64/aarch64-modes.def: Add comment about how the carry
	bit is set by add and compare.
	(CC_ADC): New CC_MODE.
	* config/aarch64/aarch64.c (aarch64_select_cc_mode): Use variables
	to cache the code and mode of X.  Adjust the shape of a CC_Cmode
	comparison.  Add detection for CC_ADCmode.
	(aarch64_get_condition_code_1): Update code support for CC_Cmode.  Add
	CC_ADCmode.
	* config/aarch64/aarch64.md (uaddv<mode>4): Use LTU with CCmode.
	(uaddvti4): Comparison result is in CC_ADCmode and the condition is GEU.
	(add<mode>3_compareC_cconly_imm): Delete.  Merge into...
	(add<mode>3_compareC_cconly): ... this.  Restructure the comparison
	to eliminate the need for zero-extending the operands.
	(add<mode>3_compareC_imm): Delete.  Merge into ...
	(add<mode>3_compareC): ... this.  Restructure the comparison to
	eliminate the need for zero-extending the operands.
	(add<mode>3_carryin): Use LTU for the overflow detection.
	(add<mode>3_carryinC): Use CC_ADCmode for the result of the carry out.
	Reexpress comparison for overflow.
	(add<mode>3_carryinC_zero): Update for change to add<mode>3_carryinC.
	(add<mode>3_carryinC): Likewise.
	(add<mode>3_carryinV): Use LTU for carry between partials.
	* config/aarch64/predicates.md (aarch64_carry_operation): Update
	handling of CC_Cmode and add CC_ADCmode.
	(aarch64_borrow_operation): Likewise.

2019-01-16  Tamar Christina  <tamar.christina@arm.com>

	* config/arm/arm-protos.h (neon_vcmla_lane_prepare_operands):
	Remove patternmode.
	* config/arm/arm.c (neon_vcmla_lane_prepare_operands): Likewise.
	* config/arm/neon.md (neon_vcmla_lane<rot><mode>,
	neon_vcmla_laneq<rot><mode>, neon_vcmlaq_lane<rot><mode>):
	Remove endianness conversion.

2019-01-16  Martin Liska  <mliska@suse.cz>

	* Makefile.in: Set TOOL_INCLUDE_DIR and NATIVE_SYSTEM_HEADER_DIR
	for GCC driver.
	* config/gnu-user.h (TARGET_F951_OPTIONS): Add 'finclude%s/' as
	a new argument.
	* gcc.c (add_sysrooted_hdrs_prefix): New function.
	(path_prefix_reset): Move up in the source file.
	(find_fortran_preinclude_file): Make complex search for the
	fortran header files.

2019-01-15  Nikhil Benesch  <nikhil.benesch@gmail.com>

	* godump.c (go_output_typedef): When outputting a typedef, refer
	to the underlying type by its name and not its structure.

2019-01-15  David Malcolm  <dmalcolm@redhat.com>

	PR c++/88795
	* tree.c (build_function_type): Assert that arg_types is not
	error_mark_node.

2019-01-15  Richard Sandiford  <richard.sandiford@arm.com>

	PR inline-asm/52813
	* doc/extend.texi: Document that listing the stack pointer in the
	clobber list of an asm is a deprecated feature.
	* common.opt (Wdeprecated): Moved from c-family/c.opt.
	* cfgexpand.c (asm_clobber_reg_is_valid): Issue a -Wdeprecated
	warning instead of an error for clobbers of the stack pointer.
	Add a note explaining why.

2019-01-15  Richard Biener  <rguenther@suse.de>

	PR debug/88046
	* dwarf2out.c (gen_member_die): Do not generate inheritance
	DIEs late.

2019-01-15  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/88855
	* tree-if-conv.c (combine_blocks): Collect
	SSA_NAME_OCCURS_IN_ABNORMAL_PHI from propagated out virtuals.

2019-01-15  Tom de Vries  <tdevries@suse.de>

	PR target/80547
	* config/nvptx/nvptx.c (nvptx_goacc_reduction_init): Handle
	lhs == NULL_TREE for gang-level reduction.

2019-01-15  Richard Biener  <rguenther@suse.de>
	    Prathamesh Kulkarni  <prathamesh.kulkarni@linaro.org>

	PR ipa/88788
	* ipa-pure-const.c (malloc_candidate_p_1): Add parameter visited and
	return true if SSA_NAME is already marked in visited bitmap.
	(malloc_candidate_p): Pass visited to malloc_candidate_p_1.

2019-01-15  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/88775
	* match.pd (cmp (convert1?@2 addr@0) (convert2? addr@1)): Optimize
	equal == 0 equality pointer comparisons some more if compared in
	integral types and either one points to an automatic var and the
	other to a global, or we can prove at least one points to the middle
	or both point to start or both point to end.

2019-01-14  Andi Kleen  <ak@linux.intel.com>

	* Makefile.in: Lower autofdo sampling rate by 10x.
	* Makefile.tpl: Dito.

2019-01-14  Tom Honermann  <tom@honermann.net>

	* defaults.h: Define CHAR8_TYPE.

2019-01-14  Martin Sebor  <msebor@redhat.com>

	PR target/88638
	* doc/extend.texi (Darwin Format Checks): Clarify.

2019-01-14  Richard Biener  <rguenther@suse.de>

	* genmatch.c (dt_simplify::gen_1): Change dumping dependent on
	whether we are in (simplify ...) or (match ...) context.

2019-01-14  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/88796
	* emit-rtl.h (struct rtl_data): Add stack_protect_guard_decl field.
	* cfgexpand.c (stack_protect_prologue): Initialize
	crtl->stack_protect_guard_decl.
	* function.c (stack_protect_epilogue): Use it instead of calling
	targetm.stack_protect_guard again.
	* dse.c (check_mem_read_rtx): Ignore MEM_VOLATILE_P reads from
	MEMs with MEM_EXPR equal to crtl->stack_protect_guard or
	crtl->stack_protect_guard_decl.
	* config/i386/i386.c (ix86_stack_protect_guard): Set TREE_THIS_VOLATILE
	on the returned MEM_EXPR.

2019-01-12  Tom de Vries  <tdevries@suse.de>

	* config/nvptx/nvptx.c (nvptx_goacc_validate_dims_1): Alow setting
	vector length using -fopenacc-dim.

2019-01-12  Tom de Vries  <tdevries@suse.de>

	* config/nvptx/nvptx.c (nvptx_goacc_validate_dims): Take larger vector
	lengths into account.

2019-01-12  Svante Signell  <svante.signell@gmail.com>

	* config/i386/gnu.h (TARGET_THREAD_SSP_OFFSET): Define.
	(TARGET_CAN_SPLIT_STACK): Define.
	(TARGET_THREAD_SPLIT_STACK_OFFSET): Define.

2019-01-05  Jan Hubicka  <hubicka@ucw.cz>

	* params.def (inline-unit-growth): Set to 40.

2019-01-12  Jakub Jelinek  <jakub@redhat.com>

	* tree-ssa-loop-ivopts.c (find_inv_vars): Fix a comment typo.

2019-01-12  Tom de Vries  <tdevries@suse.de>

	* config/nvptx/nvptx.c (nvptx_goacc_validate_dims_1): In offloading
	region calling vector-partitionable routine, set default_vector_length
	to WARP_SIZE.

2019-01-12  Tom de Vries  <tdevries@suse.de>

	* config/nvptx/nvptx.c (nvptx_goacc_validate_dims_1): Add an use new
	variable default_vector_length.

2019-01-12  Tom de Vries  <tdevries@suse.de>

	PR middle-end/88703
	* config/nvptx/nvptx.c (nvptx_goacc_validate_dims_1): Apply defaults
	from oacc_default_dims, as oacc_validate_dims would do it, and apply
	dimensions limits.

2019-01-12  Tom de Vries  <tdevries@suse.de>

	* config/nvptx/nvptx.c (nvptx_goacc_validate_dims_1)
	(nvptx_goacc_validate_dims): Add used parameter.
	* doc/tm.texi: Regenerate.
	* omp-offload.c (oacc_parse_default_dims, oacc_validate_dims): Add
	argument to call to targetm.goacc.validate_dims.
	(default_goacc_validate_dims): Add used
	parameter.
	* target.def (validate_dims): Add used parameter in DEFHOOK.
	* targhooks.h (default_goacc_validate_dims): Add used parameter.

2019-01-11  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/85956
	PR lto/88733
	* tree-inline.h (struct copy_body_data): Add adjust_array_error_bounds
	field.
	* tree-inline.c (remap_type_1): Formatting fix.  If TYPE_MAX_VALUE of
	ARRAY_TYPE's TYPE_DOMAIN is newly error_mark_node, replace it with
	a dummy "omp dummy var" variable if id->adjust_array_error_bounds.
	* omp-low.c (new_omp_context): Set cb.adjust_array_error_bounds.

2019-01-11  Vladimir Makarov  <vmakarov@redhat.com>

	PR rtl-optimization/87305
	* lra-assigns.c
	(setup_live_pseudos_and_spill_after_risky_transforms): Add code
	for little endian pseudos used as paradoxical subreg.

2019-01-11  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/88693
	* tree-ssa-strlen.c (get_min_string_length): Don't set *full_string_p
	for STRING_CSTs that don't contain any NUL characters in the first
	TREE_STRING_LENGTH bytes.

2019-01-11  Alan Modra  <amodra@gmail.com>

	PR 88777
	PR 88614
	* genattrtab.c (min_fn): Don't translate values.
	(min_attr_value): Return INT_MAX when the value can't be calculated.
	Return minimum among any values that can be calculated.
	(max_attr_value): Adjust.

2019-01-11  Jakub Jelinek  <jakub@redhat.com>

	* Makefile.in (PLUGIN_HEADERS): Add $(INSN_ATTR_H).

2019-01-11  Steve Ellcey  <sellcey@marvell.com>

	* config/aarch64/aarch64.c (aarch64_simd_call_p): New function.
	(aarch64_hard_regno_call_part_clobbered): Add insn argument.
	(aarch64_return_call_with_max_clobbers): New function.
	(TARGET_RETURN_CALL_WITH_MAX_CLOBBERS): New macro.
	* config/avr/avr.c (avr_hard_regno_call_part_clobbered): Add insn
	argument.
	* config/i386/i386.c (ix86_hard_regno_call_part_clobbered): Ditto.
	* config/mips/mips.c (mips_hard_regno_call_part_clobbered): Ditto.
	* config/rs6000/rs6000.c (rs6000_hard_regno_call_part_clobbered): Ditto.
	* config/s390/s390.c (s390_hard_regno_call_part_clobbered): Ditto.
	* cselib.c (cselib_process_insn): Add argument to
	targetm.hard_regno_call_part_clobbered call.
	* ira-conflicts.c (ira_build_conflicts): Ditto.
	* ira-costs.c (ira_tune_allocno_costs): Ditto.
	* lra-constraints.c (inherit_reload_reg): Ditto.
	* lra-int.h (struct lra_reg): Add call_insn field, remove call_p field.
	* lra-lives.c (check_pseudos_live_through_calls): Add call_insn
	argument.  Call targetm.return_call_with_max_clobbers.
	Add argument to targetm.hard_regno_call_part_clobbered call.
	(calls_have_same_clobbers_p): New function.
	(process_bb_lives): Add call_insn and last_call_insn variables.
	Pass call_insn to check_pseudos_live_through_calls.
	Modify if stmt to check targetm.return_call_with_max_clobbers.
	Update setting of flush variable.
	(lra_create_live_ranges_1): Set call_insn to NULL instead of call_p
	to false.
	* lra.c (initialize_lra_reg_info_element): Set call_insn to NULL.
	* regcprop.c (copyprop_hardreg_forward_1): Add argument to
	targetm.hard_regno_call_part_clobbered call.
	* reginfo.c (choose_hard_reg_mode): Ditto.
	* regrename.c (check_new_reg_p): Ditto.
	* reload.c (find_equiv_reg): Ditto.
	* reload1.c (emit_reload_insns): Ditto.
	* sched-deps.c (deps_analyze_insn): Ditto.
	* sel-sched.c (init_regs_for_mode): Ditto.
	(mark_unavailable_hard_regs): Ditto.
	* targhooks.c (default_dwarf_frame_reg_mode): Ditto.
	* target.def (hard_regno_call_part_clobbered): Add insn argument.
	(return_call_with_max_clobbers): New target function.
	* doc/tm.texi: Regenerate.
	* doc/tm.texi.in (TARGET_RETURN_CALL_WITH_MAX_CLOBBERS): New hook.
	* hooks.c (hook_bool_uint_mode_false): Change to
	hook_bool_insn_uint_mode_false.
	* hooks.h (hook_bool_uint_mode_false): Ditto.

2019-01-11  Steve Ellcey  <sellcey@marvell.com>

	* config/aarch64/aarch64.c (aarch64_simd_call_p): New function.
	(aarch64_remove_extra_call_preserved_regs): New function.
	(TARGET_REMOVE_EXTRA_CALL_PRESERVED_REGS): New macro.
	* doc/tm.texi.in (TARGET_REMOVE_EXTRA_CALL_PRESERVED_REGS): New hook.
	* doc/tm.texi: Regenerate.
	* final.c (get_call_reg_set_usage): Call new hook.
	* target.def (remove_extra_call_preserved_regs): New hook.
	* targhooks.c (default_remove_extra_call_preserved_regs): New function.
	* targhooks.h (default_remove_extra_call_preserved_regs): New function.

2019-01-11  Jakub Jelinek  <jakub@redhat.com>

	PR bootstrap/88714
	* passes.c (finish_optimization_passes): Call print_combine_total_stats
	inside of pass_combine_1 dump rather than pass_profile_1.

2019-01-11  Tom de Vries  <tdevries@suse.de>

	* config/nvptx/nvptx.c (PTX_CTA_NUM_BARRIERS, PTX_PER_CTA_BARRIER)
	(PTX_NUM_PER_CTA_BARRIER, PTX_FIRST_PER_WORKER_BARRIER)
	(PTX_NUM_PER_WORKER_BARRIERS): Define.
	(nvptx_apply_dim_limits): Prevent vector_length 64 and
	num_workers 16.

2019-01-11  Tom de Vries  <tdevries@suse.de>

	* config/nvptx/nvptx.c (PTX_CTA_SIZE): Move up.

2019-01-11  Jan Beulich  <jbeulich@suse.com>

	* config/i386/i386.md (rex64suffix): Add L suffix for SI.
	* config/i386/sse.md (cvtusi2<ssescalarmodesuffix>32<round_name>,
	sse2_cvtsi2sd): Add {l}.
	(sse2_cvtsi2sdq<round_name>): Make q conditional upon AT&T
	syntax.

2019-01-10  Jakub Jelinek  <jakub@redhat.com>

	PR target/88785
	* config/i386/sse.md (float<floatunssuffix>v2div2sf2): Turn into
	define_expand.
	(*float<floatunssuffix>v2div2sf2): New define_insn.
	(float<floatunssuffix>v2div2sf2_mask): Turn into define_expand.
	(*float<floatunssuffix>v2div2sf2_mask): New define_insn.
	(*float<floatunssuffix>v2div2sf2_mask_1): Replace
	subrtxes (const_vector:V2SF [(const_int 0) (const_int 0)]) with
	match_operands with "const0_operand" "C".

2019-01-10  Tamar Christina  <tamar.christina@arm.com>

	* config/aarch64/aarch64-builtins.c
	(aarch64_init_builtins): Move aarch64_init_fcmla_laneq_builtins...
	(aarch64_init_simd_builtins): ...Here

2019-01-10  Vladimir Makarov  <vmakarov@redhat.com>

	PR rtl-optimization/87305
	* lra-assigns.c
	(setup_live_pseudos_and_spill_after_risky_transforms): Check
	allocation for big endian pseudos used as paradoxical subregs and
	spill them if it is wrong.
	* lra-constraints.c (lra_constraints): Add a comment.

2019-01-10  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/88792
	* tree-ssa-pre.c (get_representative_for): Do not return a
	value-number here.

2019-01-10  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/84877
	PR bootstrap/88450
	* function.c (assign_stack_local_1): Revert the 2018-11-21 changes.
	(assign_parm_setup_block): Do the argument slot realignment here
	instead.

2019-01-10  Stefan Agner  <stefan@agner.ch>

	PR target/88648
	* config/arm/arm.c (arm_option_override_internal): Force
	opts->x_inline_asm_unified to true only if TARGET_THUMB2_P.

2019-01-10  Jakub Jelinek  <jakub@redhat.com>

	PR c/88568
	* attribs.c (handle_dll_attribute): Clear TREE_STATIC after setting
	DECL_EXTERNAL.

2019-01-10  Tamar Christina  <tamar.christina@arm.com>

	* config/arm/arm-builtins.c
	(enum arm_type_qualifiers): Add qualifier_lane_pair_index.
	(MAC_LANE_PAIR_QUALIFIERS): New.
	(arm_expand_builtin_args): Use it.
	(arm_expand_builtin_1): Likewise.
	* config/arm/arm-protos.h (neon_vcmla_lane_prepare_operands): New.
	* config/arm/arm.c (neon_vcmla_lane_prepare_operands): New.
	* config/arm/arm-c.c (arm_cpu_builtins): Add __ARM_FEATURE_COMPLEX.
	* config/arm/arm_neon.h:
	(vcadd_rot90_f16): New.
	(vcaddq_rot90_f16): New.
	(vcadd_rot270_f16): New.
	(vcaddq_rot270_f16): New.
	(vcmla_f16): New.
	(vcmlaq_f16): New.
	(vcmla_lane_f16): New.
	(vcmla_laneq_f16): New.
	(vcmlaq_lane_f16): New.
	(vcmlaq_laneq_f16): New.
	(vcmla_rot90_f16): New.
	(vcmlaq_rot90_f16): New.
	(vcmla_rot90_lane_f16): New.
	(vcmla_rot90_laneq_f16): New.
	(vcmlaq_rot90_lane_f16): New.
	(vcmlaq_rot90_laneq_f16): New.
	(vcmla_rot180_f16): New.
	(vcmlaq_rot180_f16): New.
	(vcmla_rot180_lane_f16): New.
	(vcmla_rot180_laneq_f16): New.
	(vcmlaq_rot180_lane_f16): New.
	(vcmlaq_rot180_laneq_f16): New.
	(vcmla_rot270_f16): New.
	(vcmlaq_rot270_f16): New.
	(vcmla_rot270_lane_f16): New.
	(vcmla_rot270_laneq_f16): New.
	(vcmlaq_rot270_lane_f16): New.
	(vcmlaq_rot270_laneq_f16): New.
	(vcadd_rot90_f32): New.
	(vcaddq_rot90_f32): New.
	(vcadd_rot270_f32): New.
	(vcaddq_rot270_f32): New.
	(vcmla_f32): New.
	(vcmlaq_f32): New.
	(vcmla_lane_f32): New.
	(vcmla_laneq_f32): New.
	(vcmlaq_lane_f32): New.
	(vcmlaq_laneq_f32): New.
	(vcmla_rot90_f32): New.
	(vcmlaq_rot90_f32): New.
	(vcmla_rot90_lane_f32): New.
	(vcmla_rot90_laneq_f32): New.
	(vcmlaq_rot90_lane_f32): New.
	(vcmlaq_rot90_laneq_f32): New.
	(vcmla_rot180_f32): New.
	(vcmlaq_rot180_f32): New.
	(vcmla_rot180_lane_f32): New.
	(vcmla_rot180_laneq_f32): New.
	(vcmlaq_rot180_lane_f32): New.
	(vcmlaq_rot180_laneq_f32): New.
	(vcmla_rot270_f32): New.
	(vcmlaq_rot270_f32): New.
	(vcmla_rot270_lane_f32): New.
	(vcmla_rot270_laneq_f32): New.
	(vcmlaq_rot270_lane_f32): New.
	(vcmlaq_rot270_laneq_f32): New.
	* config/arm/arm_neon_builtins.def (vcadd90, vcadd270, vcmla0, vcmla90,
	vcmla180, vcmla270, vcmla_lane0, vcmla_lane90, vcmla_lane180,
	vcmla_lane270, vcmla_laneq0, vcmla_laneq90, vcmla_laneq180,
	vcmla_laneq270, vcmlaq_lane0, vcmlaq_lane90, vcmlaq_lane180,
	vcmlaq_lane270): New.
	* config/arm/neon.md (neon_vcmla_lane<rot><mode>,
	neon_vcmla_laneq<rot><mode>, neon_vcmlaq_lane<rot><mode>): New.
	* config/arm/arm.c (arm_arch8_3, arm_arch8_4): New.
	* config/arm/arm.h (TARGET_COMPLEX, arm_arch8_3, arm_arch8_4): New.
	(arm_option_reconfigure_globals): Use them.
	* config/arm/iterators.md (VDF, VQ_HSF): New.
	(VCADD, VCMLA): New.
	(VF_constraint, rot, rotsplit1, rotsplit2): Add V4HF and V8HF.
	* config/arm/neon.md (neon_vcadd<rot><mode>, neon_vcmla<rot><mode>):
	New.
	* config/arm/unspecs.md (UNSPEC_VCADD90, UNSPEC_VCADD270,
	UNSPEC_VCMLA, UNSPEC_VCMLA90, UNSPEC_VCMLA180, UNSPEC_VCMLA270): New.

2019-01-10  Tamar Christina  <tamar.christina@arm.com>

	* config/aarch64/aarch64-builtins.c (enum aarch64_type_qualifiers):
	Add qualifier_lane_pair_index.
	(emit-rtl.h): Include.
	(TYPES_QUADOP_LANE_PAIR): New.
	(aarch64_simd_expand_args): Use it.
	(aarch64_simd_expand_builtin): Likewise.
	(AARCH64_SIMD_FCMLA_LANEQ_BUILTINS, aarch64_fcmla_laneq_builtin_datum):
	New.
	(FCMLA_LANEQ_BUILTIN, AARCH64_SIMD_FCMLA_LANEQ_BUILTIN_BASE,
	AARCH64_SIMD_FCMLA_LANEQ_BUILTINS, aarch64_fcmla_lane_builtin_data,
	aarch64_init_fcmla_laneq_builtins, aarch64_expand_fcmla_builtin): New.
	(aarch64_init_builtins): Add aarch64_init_fcmla_laneq_builtins.
	(aarch64_expand_buildin): Add AARCH64_SIMD_BUILTIN_FCMLA_LANEQ0_V2SF,
	AARCH64_SIMD_BUILTIN_FCMLA_LANEQ90_V2SF,
	AARCH64_SIMD_BUILTIN_FCMLA_LANEQ180_V2SF,
	AARCH64_SIMD_BUILTIN_FCMLA_LANEQ2700_V2SF,
	AARCH64_SIMD_BUILTIN_FCMLA_LANEQ0_V4HF,
	AARCH64_SIMD_BUILTIN_FCMLA_LANEQ90_V4HF,
	AARCH64_SIMD_BUILTIN_FCMLA_LANEQ180_V4HF,
	AARCH64_SIMD_BUILTIN_FCMLA_LANEQ270_V4HF.
	* config/aarch64/iterators.md (FCMLA_maybe_lane): New.
	* config/aarch64/aarch64-c.c (aarch64_update_cpp_builtins):
	Add __ARM_FEATURE_COMPLEX.
	* config/aarch64/aarch64-simd-builtins.def (fcadd90, fcadd270, fcmla0,
	fcmla90, fcmla180, fcmla270, fcmla_lane0, fcmla_lane90, fcmla_lane180,
	fcmla_lane270, fcmla_laneq0, fcmla_laneq90, fcmla_laneq180,
	fcmla_laneq270, fcmlaq_lane0, fcmlaq_lane90, fcmlaq_lane180,
	fcmlaq_lane270): New.
	* config/aarch64/aarch64-simd.md (aarch64_fcmla_lane<rot><mode>,
	aarch64_fcmla_laneq<rot>v4hf, aarch64_fcmlaq_lane<rot><mode>,
	aarch64_fcadd<rot><mode>, aarch64_fcmla<rot><mode>): New.
	* config/aarch64/arm_neon.h:
	(vcadd_rot90_f16): New.
	(vcaddq_rot90_f16): New.
	(vcadd_rot270_f16): New.
	(vcaddq_rot270_f16): New.
	(vcmla_f16): New.
	(vcmlaq_f16): New.
	(vcmla_lane_f16): New.
	(vcmla_laneq_f16): New.
	(vcmlaq_lane_f16): New.
	(vcmlaq_rot90_lane_f16): New.
	(vcmla_rot90_laneq_f16): New.
	(vcmla_rot90_lane_f16): New.
	(vcmlaq_rot90_f16): New.
	(vcmla_rot90_f16): New.
	(vcmlaq_laneq_f16): New.
	(vcmla_rot180_laneq_f16): New.
	(vcmla_rot180_lane_f16): New.
	(vcmlaq_rot180_f16): New.
	(vcmla_rot180_f16): New.
	(vcmlaq_rot90_laneq_f16): New.
	(vcmlaq_rot270_laneq_f16): New.
	(vcmlaq_rot270_lane_f16): New.
	(vcmla_rot270_laneq_f16): New.
	(vcmlaq_rot270_f16): New.
	(vcmla_rot270_f16): New.
	(vcmlaq_rot180_laneq_f16): New.
	(vcmlaq_rot180_lane_f16): New.
	(vcmla_rot270_lane_f16): New.
	(vcadd_rot90_f32): New.
	(vcaddq_rot90_f32): New.
	(vcaddq_rot90_f64): New.
	(vcadd_rot270_f32): New.
	(vcaddq_rot270_f32): New.
	(vcaddq_rot270_f64): New.
	(vcmla_f32): New.
	(vcmlaq_f32): New.
	(vcmlaq_f64): New.
	(vcmla_lane_f32): New.
	(vcmla_laneq_f32): New.
	(vcmlaq_lane_f32): New.
	(vcmlaq_laneq_f32): New.
	(vcmla_rot90_f32): New.
	(vcmlaq_rot90_f32): New.
	(vcmlaq_rot90_f64): New.
	(vcmla_rot90_lane_f32): New.
	(vcmla_rot90_laneq_f32): New.
	(vcmlaq_rot90_lane_f32): New.
	(vcmlaq_rot90_laneq_f32): New.
	(vcmla_rot180_f32): New.
	(vcmlaq_rot180_f32): New.
	(vcmlaq_rot180_f64): New.
	(vcmla_rot180_lane_f32): New.
	(vcmla_rot180_laneq_f32): New.
	(vcmlaq_rot180_lane_f32): New.
	(vcmlaq_rot180_laneq_f32): New.
	(vcmla_rot270_f32): New.
	(vcmlaq_rot270_f32): New.
	(vcmlaq_rot270_f64): New.
	(vcmla_rot270_lane_f32): New.
	(vcmla_rot270_laneq_f32): New.
	(vcmlaq_rot270_lane_f32): New.
	(vcmlaq_rot270_laneq_f32): New.
	* config/aarch64/aarch64.h (TARGET_COMPLEX): New.
	* config/aarch64/iterators.md (UNSPEC_FCADD90, UNSPEC_FCADD270,
	UNSPEC_FCMLA, UNSPEC_FCMLA90, UNSPEC_FCMLA180, UNSPEC_FCMLA270): New.
	(FCADD, FCMLA): New.
	(rot): New.
	* config/arm/types.md (neon_fcadd, neon_fcmla): New.

2019-01-09  Sandra Loosemore  <sandra@codesourcery.com>

	PR other/16615

	* config/pa/pa.c: Change "can not" to "cannot".
	* gimple-ssa-evrp-analyze.c: Likewise.
	* ipa-icf.c: Likewise.
	* ipa-polymorphic-call.c: Likewise.
	* ipa-pure-const.c: Likewise.
	* lra-constraints.c: Likewise.
	* lra-remat.c: Likewise.
	* reload1.c: Likewise.
	* reorg.c: Likewise.
	* tree-ssa-uninit.c: Likewise.

2019-01-09  Sandra Loosemore  <sandra@codesourcery.com>

	PR other/16615

	* Makefile.in: Mechanically replace "can not" with "cannot".
	* alias.c: Likewise.
	* builtins.c: Likewise.
	* calls.c: Likewise.
	* cgraph.c: Likewise.
	* cgraph.h: Likewise.
	* cgraphclones.c: Likewise.
	* cgraphunit.c: Likewise.
	* combine-stack-adj.c: Likewise.
	* combine.c: Likewise.
	* common/config/i386/i386-common.c: Likewise.
	* config/aarch64/aarch64.c: Likewise.
	* config/alpha/sync.md: Likewise.
	* config/arc/arc.c: Likewise.
	* config/arc/predicates.md: Likewise.
	* config/arm/arm-c.c: Likewise.
	* config/arm/arm.c: Likewise.
	* config/arm/arm.h: Likewise.
	* config/arm/arm.md: Likewise.
	* config/arm/cortex-r4f.md: Likewise.
	* config/csky/csky.c: Likewise.
	* config/csky/csky.h: Likewise.
	* config/darwin-f.c: Likewise.
	* config/epiphany/epiphany.md: Likewise.
	* config/i386/i386.c: Likewise.
	* config/i386/sol2.h: Likewise.
	* config/m68k/m68k.c: Likewise.
	* config/mcore/mcore.h: Likewise.
	* config/microblaze/microblaze.md: Likewise.
	* config/mips/20kc.md: Likewise.
	* config/mips/sb1.md: Likewise.
	* config/nds32/nds32.c: Likewise.
	* config/nds32/predicates.md: Likewise.
	* config/pa/pa.c: Likewise.
	* config/rs6000/e300c2c3.md: Likewise.
	* config/rs6000/rs6000.c: Likewise.
	* config/s390/s390.h: Likewise.
	* config/sh/sh.c: Likewise.
	* config/sh/sh.md: Likewise.
	* config/spu/vmx2spu.h: Likewise.
	* cprop.c: Likewise.
	* dbxout.c: Likewise.
	* df-scan.c: Likewise.
	* doc/cfg.texi: Likewise.
	* doc/extend.texi: Likewise.
	* doc/fragments.texi: Likewise.
	* doc/gty.texi: Likewise.
	* doc/invoke.texi: Likewise.
	* doc/lto.texi: Likewise.
	* doc/md.texi: Likewise.
	* doc/objc.texi: Likewise.
	* doc/rtl.texi: Likewise.
	* doc/tm.texi: Likewise.
	* dse.c: Likewise.
	* emit-rtl.c: Likewise.
	* emit-rtl.h: Likewise.
	* except.c: Likewise.
	* expmed.c: Likewise.
	* expr.c: Likewise.
	* fold-const.c: Likewise.
	* genautomata.c: Likewise.
	* gimple-fold.c: Likewise.
	* hard-reg-set.h: Likewise.
	* ifcvt.c: Likewise.
	* ipa-comdats.c: Likewise.
	* ipa-cp.c: Likewise.
	* ipa-devirt.c: Likewise.
	* ipa-fnsummary.c: Likewise.
	* ipa-icf.c: Likewise.
	* ipa-inline-transform.c: Likewise.
	* ipa-inline.c: Likewise.
	* ipa-polymorphic-call.c: Likewise.
	* ipa-profile.c: Likewise.
	* ipa-prop.c: Likewise.
	* ipa-pure-const.c: Likewise.
	* ipa-reference.c: Likewise.
	* ipa-split.c: Likewise.
	* ipa-visibility.c: Likewise.
	* ipa.c: Likewise.
	* ira-build.c: Likewise.
	* ira-color.c: Likewise.
	* ira-conflicts.c: Likewise.
	* ira-costs.c: Likewise.
	* ira-int.h: Likewise.
	* ira-lives.c: Likewise.
	* ira.c: Likewise.
	* ira.h: Likewise.
	* loop-invariant.c: Likewise.
	* loop-unroll.c: Likewise.
	* lower-subreg.c: Likewise.
	* lra-assigns.c: Likewise.
	* lra-constraints.c: Likewise.
	* lra-eliminations.c: Likewise.
	* lra-lives.c: Likewise.
	* lra-remat.c: Likewise.
	* lra-spills.c: Likewise.
	* lra.c: Likewise.
	* lto-cgraph.c: Likewise.
	* lto-streamer-out.c: Likewise.
	* postreload-gcse.c: Likewise.
	* predict.c: Likewise.
	* profile-count.h: Likewise.
	* profile.c: Likewise.
	* recog.c: Likewise.
	* ree.c: Likewise.
	* reload.c: Likewise.
	* reload1.c: Likewise.
	* reorg.c: Likewise.
	* resource.c: Likewise.
	* rtl.def: Likewise.
	* rtl.h: Likewise.
	* rtlanal.c: Likewise.
	* sched-deps.c: Likewise.
	* sched-ebb.c: Likewise.
	* sched-rgn.c: Likewise.
	* sel-sched-ir.c: Likewise.
	* sel-sched.c: Likewise.
	* shrink-wrap.c: Likewise.
	* simplify-rtx.c: Likewise.
	* symtab.c: Likewise.
	* target.def: Likewise.
	* toplev.c: Likewise.
	* tree-call-cdce.c: Likewise.
	* tree-cfg.c: Likewise.
	* tree-complex.c: Likewise.
	* tree-core.h: Likewise.
	* tree-eh.c: Likewise.
	* tree-inline.c: Likewise.
	* tree-loop-distribution.c: Likewise.
	* tree-nrv.c: Likewise.
	* tree-profile.c: Likewise.
	* tree-sra.c: Likewise.
	* tree-ssa-alias.c: Likewise.
	* tree-ssa-dce.c: Likewise.
	* tree-ssa-dom.c: Likewise.
	* tree-ssa-forwprop.c: Likewise.
	* tree-ssa-loop-im.c: Likewise.
	* tree-ssa-loop-ivcanon.c: Likewise.
	* tree-ssa-loop-ivopts.c: Likewise.
	* tree-ssa-loop-niter.c: Likewise.
	* tree-ssa-phionlycprop.c: Likewise.
	* tree-ssa-phiopt.c: Likewise.
	* tree-ssa-propagate.c: Likewise.
	* tree-ssa-threadedge.c: Likewise.
	* tree-ssa-threadupdate.c: Likewise.
	* tree-ssa-uninit.c: Likewise.
	* tree-ssanames.c: Likewise.
	* tree-streamer-out.c: Likewise.
	* tree.c: Likewise.
	* tree.h: Likewise.
	* vr-values.c: Likewise.

2019-01-09  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386-protos.h (ix86_expand_xorsign): New prototype.
	(ix86_split_xorsign): Ditto.
	* config/i386/i386.c (ix86_expand_xorsign): New function.
	(ix86_split_xorsign): Ditto.
	* config/i386/i386.md (UNSPEC_XORSIGN): New unspec.
	(xorsign<mode>3): New expander.
	(xorsign<mode>3_1): New insn_and_split pattern.
	* config/i386/sse.md (xorsign<mode>3): New expander.

2019-01-09  Eric Botcazou  <ebotcazou@adacore.com>

	* config/sparc/sparc.md (*tablejump_sp32): Merge into...
	(*tablejump_sp64): Likewise.
	(*tablejump<P:mode>): ...this.
	(*call_address_sp32): Merge into...
	(*call_address_sp64): Likewise.
	(*call_address<P:mode>): ...this.
	(*call_symbolic_sp32): Merge into...
	(*call_symbolic_sp64): Likewise.
	(*call_symbolic<P:mode>): ...this.
	(call_value): Remove constraint and add predicate.
	(*call_value_address_sp32): Merge into...
	(*call_value_address_sp64): Likewise.
	(*call_value_address<P:mode>): ...this.
	(*call_value_symbolic_sp32): Merge into...
	(*call_value_symbolic_sp64): Likewise.
	(*call_value_symbolic<P:mode>): ...this.
	(*sibcall_symbolic_sp32): Merge into...
	(*sibcall_symbolic_sp64): Likewise.
	(*sibcall_symbolic<P:mode>): ...this.
	(sibcall_value): Remove constraint and add predicate.
	(*sibcall_value_symbolic_sp32): Merge into...
	(*sibcall_value_symbolic_sp64): Likewise.
	(*sibcall_value_symbolic<P:mode>): ...this.
	(window_save): Minor tweak.
	(*branch_sp32): Merge into...
	(*branch_sp64): Likewise.
	(*branch<P:mode>): ...this.

2019-01-09  Eric Botcazou  <ebotcazou@adacore.com>
	    James Clarke  <jrtc27@jrtc27.com>

	PR target/84010
	* config/sparc/sparc.c (sparc_legitimize_tls_address): Only use Pmode
	consistently in TLS address generation and adjust code to the renaming
	of patterns.  Mark calls to __tls_get_addr as const.
	* config/sparc/sparc.md (tgd_hi22): Turn into...
	(tgd_hi22<P:mode>): ...this and use Pmode throughout.
	(tgd_lo10): Turn into...
	(tgd_lo10<P:mode>): ...this and use Pmode throughout.
	(tgd_add32): Merge into...
	(tgd_add64): Likewise.
	(tgd_add<P:mode>): ...this and use Pmode throughout.
	(tldm_hi22): Turn into...
	(tldm_hi22<P:mode>): ...this and use Pmode throughout.
	(tldm_lo10): Turn into...
	(tldm_lo10<P:mode>): ...this and use Pmode throughout.
	(tldm_add32): Merge into...
	(tldm_add64): Likewise.
	(tldm_add<P:mode>): ...this and use Pmode throughout.
	(tldm_call32): Merge into...
	(tldm_call64): Likewise.
	(tldm_call<P:mode>): ...this and use Pmode throughout.
	(tldo_hix22): Turn into...
	(tldo_hix22<P:mode>): ...this and use Pmode throughout.
	(tldo_lox10): Turn into...
	(tldo_lox10<P:mode>): ...this and use Pmode throughout.
	(tldo_add32): Merge into...
	(tldo_add64): Likewise.
	(tldo_add<P:mode>): ...this and use Pmode throughout.
	(tie_hi22): Turn into...
	(tie_hi22<P:mode>): ...this and use Pmode throughout.
	(tie_lo10): Turn into...
	(tie_lo10<P:mode>): ...this and use Pmode throughout.
	(tie_ld64): Use DImode throughout.
	(tie_add32): Merge into...
	(tie_add64): Likewise.
	(tie_add<P:mode>): ...this and use Pmode throughout.
	(tle_hix22_sp32): Merge into...
	(tle_hix22_sp64): Likewise.
	(tle_hix22<P:mode>): ...this and use Pmode throughout.
	(tle_lox22_sp32): Merge into...
	(tle_lox22_sp64): Likewise.
	(tle_lox22<P:mode>): ...this and use Pmode throughout.
	(*tldo_ldub_sp32): Merge into...
	(*tldo_ldub_sp64): Likewise.
	(*tldo_ldub<P:mode>): ...this and use Pmode throughout.
	(*tldo_ldub1_sp32): Merge into...
	(*tldo_ldub1_sp64): Likewise.
	(*tldo_ldub1<P:mode>): ...this and use Pmode throughout.
	(*tldo_ldub2_sp32): Merge into...
	(*tldo_ldub2_sp64): Likewise.
	(*tldo_ldub2<P:mode>): ...this and use Pmode throughout.
	(*tldo_ldsb1_sp32): Merge into...
	(*tldo_ldsb1_sp64): Likewise.
	(*tldo_ldsb1<P:mode>): ...this and use Pmode throughout.
	(*tldo_ldsb2_sp32): Merge into...
	(*tldo_ldsb2_sp64): Likewise.
	(*tldo_ldsb2<P:mode>): ...this and use Pmode throughout.
	(*tldo_ldub3_sp64): Use DImode throughout.
	(*tldo_ldsb3_sp64): Likewise.
	(*tldo_lduh_sp32): Merge into...
	(*tldo_lduh_sp64): Likewise.
	(*tldo_lduh<P:mode>): ...this and use Pmode throughout.
	(*tldo_lduh1_sp32): Merge into...
	(*tldo_lduh1_sp64): Likewise.
	(*tldo_lduh1<P:mode>): ...this and use Pmode throughout.
	(*tldo_ldsh1_sp32): Merge into...
	(*tldo_ldsh1_sp64): Likewise.
	(*tldo_ldsh1<P:mode>): ...this and use Pmode throughout.
	(*tldo_lduh2_sp64): Use DImode throughout.
	(*tldo_ldsh2_sp64): Likewise.
	(*tldo_lduw_sp32): Merge into...
	(*tldo_lduw_sp64): Likewise.
	(*tldo_lduw<P:mode>): ...this and use Pmode throughout.
	(*tldo_lduw1_sp64): Use DImode throughout.
	(*tldo_ldsw1_sp64): Likewise.
	(*tldo_ldx_sp64): Likewise.
	(*tldo_stb_sp32): Merge into...
	(*tldo_stb_sp64): Likewise.
	(*tldo_stb<P:mode>): ...this and use Pmode throughout.
	(*tldo_sth_sp32): Merge into...
	(*tldo_sth_sp64): Likewise.
	(*tldo_sth<P:mode>): ...this and use Pmode throughout.
	(*tldo_stw_sp32): Merge into...
	(*tldo_stw_sp64): Likewise.
	(*tldo_stw<P:mode>): ...this and use Pmode throughout.
	(*tldo_stx_sp64): Use DImode throughout.

2018-01-09  Sudakshina Das  <sudi.das@arm.com>

	* config/aarch64/aarch64.c (aarch64_override_options): Add case to
	check configure option to set BTI and Return Address Signing.
	* configure.ac: Add --enable-standard-branch-protection and
	--disable-standard-branch-protection.
	* configure: Regenerated.
	* doc/install.texi: Document the same.

2018-01-09  Sudakshina Das  <sudi.das@arm.com>
	    Ramana Radhakrishnan  <ramana.radhakrishnan@arm.com>

	* config.gcc (aarch64*-*-*): Add aarch64-bti-insert.o.
	* config/aarch64/aarch64.h: Update comment for TRAMPOLINE_SIZE.
	* config/aarch64/aarch64.c (aarch64_asm_trampoline_template): Update
	if bti is enabled.
	* config/aarch64/aarch64-bti-insert.c: New file.
	* config/aarch64/aarch64-passes.def (INSERT_PASS_BEFORE): Insert bti
	pass.
	* config/aarch64/aarch64-protos.h (make_pass_insert_bti): Declare the
	new bti pass.
	* config/aarch64/aarch64.md (unspecv): Add UNSPECV_BTI_NOARG,
	UNSPECV_BTI_C, UNSPECV_BTI_J and UNSPECV_BTI_JC.
	(bti_noarg, bti_j, bti_c, bti_jc): New define_insns.
	* config/aarch64/t-aarch64: Add rule for aarch64-bti-insert.o.

2018-01-09  Sudakshina Das  <sudi.das@arm.com>

	* config/aarch64/aarch64-protos.h (aarch64_bti_enabled): Declare.
	* config/aarch64/aarch64.c (aarch64_handle_no_branch_protection):
	Disable bti for -mbranch-protection=none.
	(aarch64_handle_standard_branch_protection): Enable bti for
	-mbranch-protection=standard.
	(aarch64_handle_bti_protection): Enable bti for "bti" in the string to
	-mbranch-protection.
	(aarch64_bti_enabled): Check if bti is enabled.
	* config/aarch64/aarch64.opt: Declare target variable.
	* doc/invoke.texi: Add bti to the -mbranch-protection documentation.

2018-01-09  Sudakshina Das  <sudi.das@arm.com>

	* config/aarch64/aarch64.c (aarch64_expand_prologue): Use new
	epilogue/prologue scratch registers EP0_REGNUM and EP1_REGNUM.
	(aarch64_expand_epilogue): Likewise.
	(aarch64_output_mi_thunk): Likewise.
	* config/aarch64/aarch64.h (REG_CLASS_CONTENTS): Change
	TAILCALL_ADDR_REGS to x16 and x17.
	* config/aarch64/aarch64.md: Define EP0_REGNUM and EP1_REGNUM.

2018-01-09  Sudakshina Das  <sudi.das@arm.com>

	* config/aarch64/aarch64-option-extensions.def: Define
	AARCH64_OPT_EXTENSION for memtag, rng, sb, ssbs and predres.
	* config/aarch64/aarch64.h (AARCH64_FL_RNG): New.
	(AARCH64_FL_MEMTAG, ARCH64_FL_SB, AARCH64_FL_SSBS): New.
	(AARCH64_FL_PREDRES): New.
	(AARCH64_FL_FOR_ARCH8_5): Add AARCH64_FL_SB, AARCH64_FL_SSBS and
	AARCH64_FL_PREDRES by default.
	* doc/invoke.texi: Document rng, memtag, sb, ssbs and predres.

2018-01-09  Sudakshina Das  <sudi.das@arm.com>

	* config/aarch64/aarch64-arches.def: Define AARCH64_ARCH for
	ARMv8.5-A.
	* config/aarch64/aarch64.h (AARCH64_FL_V8_5): New.
	(AARCH64_FL_FOR_ARCH8_5, AARCH64_ISA_V8_5): New.
	* doc/invoke.texi: Document ARMv8.5-A.

2019-01-09  Alejandro Martinez  <alejandro.martinezvicente@arm.com>

	* config/aarch64/aarch64-sve.md (copysign<mode>3): New define_expand.
	(xorsign<mode>3): Likewise.

2019-01-09  Jelinek  <jakub@redhat.com>

	PR middle-end/88758
	* tree.c (initializer_each_zero_or_onep) <case VECTOR_CST>: Use
	vector_cst_elt instead of VECTOR_CST_ENCODED_ELT.

	PR rtl-optimization/88331
	* function.c (assign_stack_local_1): Don't set dynamic_align_addr if
	not currently_expanding_to_rtl.

2019-01-09  Eric Botcazou  <ebotcazou@adacore.com>

	* doc/invoke.texi (-Os): Remove trailing spaces.
	(-finline-functions): Remove reference to -O2.

2019-01-08  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/79593
	* config/i386/i386.md (reg = mem; mem = reg): New define_peephole2.

	* config/rs6000/rs6000.c (rs6000_delegitimize_address): Delegitimize
	UNSPEC_FUSION_GPR to its argument.  Formatting fixes.

2019-01-08  Eric Botcazou  <ebotcazou@adacore.com>

	PR bootstrap/88721
	* config/sparc/sparc.c (function_arg_slotno): Set *PPREGNO & *PPADDING
	to -1 on entry.

	PR debug/88723
	* config/sparc/sparc.c (sparc_delegitimize_address): Deal with naked
	UNSPECs and UNSPEC_MOVE_GOTDATA specifically.

2019-01-08  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/88717
	* config/i386/i386.c (ix86_avx_u128_mode_exit): Call
	ix86_avx_u128_mode_entry.

2019-01-08  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/88753
	* tree-switch-conversion.c (switch_conversion::build_one_array):
	Come up with local variable constructor.  Convert first to
	type of constructor values.

2019-01-08  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/86554
	* tree-ssa-sccvn.c (eliminate_dom_walker, rpo_elim,
	rpo_avail): Move earlier.
	(visit_nary_op): When value-numbering to expressions
	with different overflow behavior make sure there's an
	available expression on the path.

2019-01-08  Sam Tebbs  <sam.tebbs@arm.com>

	* config/aarch64/aarch64.c (BRANCH_PROTECT_STR_MAX,
	aarch64_parse_branch_protection,
	struct aarch64_branch_protect_type,
	aarch64_handle_no_branch_protection,
	aarch64_handle_standard_branch_protection,
	aarch64_validate_mbranch_protection,
	aarch64_handle_pac_ret_protection,
	aarch64_handle_attr_branch_protection,
	accepted_branch_protection_string,
	aarch64_pac_ret_subtypes,
	aarch64_branch_protect_types,
	aarch64_handle_pac_ret_leaf): Define.
	(aarch64_override_options_after_change_1, aarch64_override_options):
	Add check for accepted_branch_protection_string.
	(aarch64_option_save): Save accepted_branch_protection_string.
	(aarch64_option_restore): Save accepted_branch_protection_string.
	* config/aarch64/aarch64.c (aarch64_attributes): Add branch-protection.
	* config/aarch64/aarch64.opt: Add mbranch-protection. Deprecate
	msign-return-address.
	* doc/invoke.texi: Add mbranch-protection.

2019-01-08  Alan Modra  <amodra@gmail.com>

	PR target/88614
	* genattrtab.c (max_attr_value, min_attr_value, or_attr_value):
	Delete "unknownp" parameter.  Adjust callers.  Handle
	CONST_INT, PLUS, MINUS, and MULT.
	(attr_value_aligned): Renamed from or_attr_value.
	(min_attr_value): Return INT_MIN for unhandled rtl case..
	(min_fn): ..and translate to INT_MAX here.
	(write_length_unit_log): Modify to cope without "unknown".
	(write_attr_value): Handle IF_THEN_ELSE.

2019-01-07  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-stmts.c (vectorizable_store): Don't use the dataref_offset
	optimization for masked stores.

2019-01-07  Richard Sandiford  <richard.sandiford@arm.com>

	PR middle-end/88567
	* tree-vect-loop.c (get_initial_defs_for_reduction): Pass the
	output vector directly to duplicate_and_interleave instead of
	going through a temporary.  Postpone insertion of ctor_seq to
	the end of the loop.

2019-01-07  Richard Earnshaw  <rearnsha@arm.com>

	PR target/86891
	* config/aarch64/aarch64.c (aarch64_expand_subvti): New parameter
	unsigned_p.  Handle signed and unsigned overflow correction as
	required.
	* config/aarch64/aarch64-protos.h (aarch64_expand_subvti): Update
	prototype.
	* config/aarch64/aarch64.md (addv<mode>4): Use aarch64_plus_operand
	for operand 2.
	(add<mode>3_compareV_imm): Make this callable for expanding.
	(subv<GPI:mode>4): Use register_operand for operand 1.  Use
	aarch64_plus_operand for operand 2.
	(subv<GPI:mode>_insn): New insn pattern.
	(subv<GPI:mode>_imm): Likewise.
	(negv<GPI:mode>3): New expand pattern.
	(negv<GPI:mode>_insn): New insn pattern.
	(negv<GPI:mode>_cmp_only): Likewise.
	(cmpv<GPI:mode>_insn): Likewise.
	(subvti4): Use register_operand for operand 1.  Update call to
	aarch64_expand_subvti.
	(usubvti4): Likewise.
	(negvti3): New expand pattern.
	(negdi_carryout): New insn pattern.
	(negvdi_carryinV): New insn pattern.
	(sub<mode3>_compare1_imm): Delete named insn pattern, make anonymous
	version the named version.
	(peepholes to convert to sub<mode3>_compare1_imm): Adjust order of
	operands.
	(usub<GPI:mode>3_carryinC, usub<GPI:mode>3_carryinC_z1): New insn
	patterns.
	(usub<GPI:mode>3_carryinC_z2, usub<GPI:mode>3_carryinC): New insn
	patterns.
	(sub<mode>3_carryinCV, sub<mode>3_carryinCV_z1_z2): Delete.
	(sub<mode>3_carryinCV_z1, sub<mode>3_carryinCV_z2): Delete.
	(sub<mode>3_carryinCV): Delete.
	(sub<GPI:mode>3_carryinV): New expand pattern.
	sub<mode>3_carryinV, sub<mode>3_carryinV_z2): New insn patterns.

2019-01-07  Richard Biener  <rguenther@suse.de>

	* tree-ssa-uncprop.c (ssa_equip_hash_traits): Remove in favor
	of tree_operand_hash.

2019-01-07  Richard Sandiford  <richard.sandiford@arm.com>

	PR tree-optimization/88598
	* tree.h (single_nonzero_element): Declare.
	* tree.c (single_nonzero_element): New function.
	* match.pd: Fold certain reductions of X & CST to X[I] & CST[I]
	if I is the only nonzero element of CST.

2019-01-07  Richard Sandiford  <richard.sandiford@arm.com>

	PR tree-optimization/88598
	* tree.h (initializer_each_zero_or_onep): Declare.
	* tree.c (initializer_each_zero_or_onep): New function.
	(signed_or_unsigned_type_for): Handle float types too.
	(unsigned_type_for, signed_type_for): Update comments accordingly.
	* match.pd: Fold x * { 0 or 1, 0 or 1, ...} to
	x & { 0 or -1, 0 or -1, ... }.

2019-01-07  Jonathan Wakely  <jwakely@redhat.com>

	* doc/install.texi: Replace references to x86_64-unknown-linux-gnu
	with x86_64-pc-linux-gnu.

2019-01-07  Tom de Vries  <tdevries@suse.de>

	PR target/85486
	* config/nvptx/nvptx.c (has_vector_partitionable_routine_calls_p): New
	function.
	(nvptx_goacc_validate_dims): Force vl32 if calling vector-partitionable
	routines.

2019-01-07  Jakub Jelinek  <jakub@redhat.com>

	* config/i386/sse.md (vec_extract<mode><ssehalfvecmodelower>): Use
	V_256_512 iterator instead of V_512 and TARGET_AVX instead of
	TARGET_AVX512F as condition.

	PR debug/88723
	* dwarf2out.c (const_ok_for_output_1): Remove redundant call to
	const_not_ok_for_debug_p target hook.
	(mem_loc_descriptor) <case UNSPEC>: Only call const_ok_for_output_1
	on UNSPEC and subexpressions thereof if all subexpressions of the
	UNSPEC are CONSTANT_P.

	PR tree-optimization/88676
	* tree-ssa-phiopt.c (two_value_replacement): New function.
	(tree_ssa_phiopt_worker): Call it.

	PR sanitizer/88619
	* cfgexpand.c (expand_stack_vars): Only align prev_offset to
	ASAN_MIN_RED_ZONE_SIZE, not to maximum of that and alignb.

	PR c++/85052
	* tree-vect-generic.c: Include insn-config.h and recog.h.
	(expand_vector_piecewise): Add defaulted ret_type argument,
	if non-NULL, use that in preference to type for the result type.
	(expand_vector_parallel): Formatting fix.
	(do_vec_conversion, do_vec_narrowing_conversion,
	expand_vector_conversion): New functions.
	(expand_vector_operations_1): Call expand_vector_conversion
	for VEC_CONVERT ifn calls.
	* internal-fn.def (VEC_CONVERT): New internal function.
	* internal-fn.c (expand_VEC_CONVERT): New function.
	* fold-const-call.c (fold_const_vec_convert): New function.
	(fold_const_call): Use it for CFN_VEC_CONVERT.
	* doc/extend.texi (__builtin_convertvector): Document.

2019-01-07  Tom de Vries  <tdevries@suse.de>

	* config/nvptx/nvptx-protos.h (nvptx_output_red_partition): Declare.
	* config/nvptx/nvptx.c (vector_red_size, vector_red_align,
	vector_red_partition, vector_red_sym): New global variables.
	(nvptx_option_override): Initialize vector_red_sym.
	(nvptx_declare_function_name): Restore red_partition register.
	(nvptx_file_end): Emit code to declare the vector reduction variables.
	(nvptx_output_red_partition): New function.
	(nvptx_expand_shared_addr): Add vector argument. Use it to handle
	large vector reductions.
	(enum nvptx_builtins): Add NVPTX_BUILTIN_VECTOR_ADDR.
	(nvptx_init_builtins): Add VECTOR_ADDR.
	(nvptx_expand_builtin): Update call to nvptx_expand_shared_addr.
	Handle nvptx_expand_shared_addr.
	(nvptx_get_shared_red_addr): Add vector argument and handle large
	vectors.
	(nvptx_goacc_reduction_setup): Add offload_attrs argument and handle
	large vectors.
	(nvptx_goacc_reduction_init): Likewise.
	(nvptx_goacc_reduction_fini): Likewise.
	(nvptx_goacc_reduction_teardown): Likewise.
	(nvptx_goacc_reduction): Update calls to nvptx_goacc_reduction_{setup,
	init,fini,teardown}.
	(nvptx_init_axis_predicate): Initialize vector_red_partition.
	(nvptx_set_current_function): Init vector_red_partition.
	* config/nvptx/nvptx.md (UNSPECV_RED_PART): New unspecv.
	(nvptx_red_partition): New insn.
	* config/nvptx/nvptx.h (struct machine_function): Add red_partition.

2019-01-07  Tom de Vries  <tdevries@suse.de>

	PR target/85381
	* config/nvptx/nvptx.c (nvptx_process_pars): Don't emit barriers for
	empty loops.

2019-01-07  Tom de Vries  <tdevries@suse.de>

	* config/nvptx/nvptx.c (oacc_bcast_partition): Declare.
	(nvptx_option_override): Init oacc_bcast_partition.
	(nvptx_init_oacc_workers): New function.
	(nvptx_declare_function_name): Call nvptx_init_oacc_workers.
	(nvptx_needs_shared_bcast): New function.
	(nvptx_find_par): Generalize to enable vectors to use shared-memory
	to propagate state.
	(nvptx_shared_propagate): Initialize vector bcast partition and
	synchronization state.
	(nvptx_single): Generalize to enable vectors to use shared-memory
	to propagate state.
	(nvptx_process_pars): Likewise.
	(nvptx_set_current_function): Initialize oacc_broadcast_partition.
	* config/nvptx/nvptx.h (struct machine_function): Add
	bcast_partition and sync_bar members.

2019-01-07  Tom de Vries  <tdevries@suse.de>

	* config/nvptx/nvptx.c (nvptx_welformed_vector_length_p)
	(nvptx_apply_dim_limits): New function.
	(nvptx_goacc_validate_dims_1): Allow PTX_MAX_VECTOR_LENGTH larger than
	PTX_WARP_SIZE.

2019-01-07  Tom de Vries  <tdevries@suse.de>

	* config/nvptx/nvptx.c (nvptx_goacc_validate_dims_1): Move warnings to
	as late as possible.

2019-01-07  Tom de Vries  <tdevries@suse.de>

	* config/nvptx/nvptx.c (PTX_VECTOR_LENGTH): Remove.
	(PTX_DEFAULT_VECTOR_LENGTH, PTX_MAX_VECTOR_LENGTH): Define.
	(nvptx_goacc_validate_dims_1, nvptx_dim_limit)
	(nvptx_goacc_reduction_fini): Use PTX_DEFAULT_VECTOR_LENGTH,
	PTX_MAX_VECTOR_LENGTH and PTX_WARP_SIZE instead of PTX_VECTOR_LENGTH.

2019-01-07  Tom de Vries  <tdevries@suse.de>

	* config/nvptx/nvptx.c (nvptx_goacc_validate_dims): Add asserts.

2019-01-07  Tom de Vries  <tdevries@suse.de>

	* omp-offload.c (oacc_get_min_dim): New function.
	* omp-offload.h (oacc_get_min_dim): Declare.

2018-12-26  Mateusz B  <mateuszb@poczta.onet.pl>

	PR target/88521
	* config/i386/i386.c (function_value_ms_64): Return small sturct in
	AX_REG and float/double in FIRST_SSE_REG for 4 or 8 byte modes.

2019-01-05  Jan Hubicka  <hubicka@ucw.cz>

	PR tree-opt/86020
	Revert:
	2017-05-22  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-inline.c (edge_badness): Use inlined_time instead of
	inline_summaries->get.

2019-01-05  Jan Hubicka  <hubicka@ucw.cz>

	* opts.c (enable_fdo_optimizations): Enable
	version-loops-for-strides, loop-interchange, unrol-and-jam
	and tree-loop-distribution.
	* invoke.texi: Document newly enabled options.

2019-01-05  Jan Hubicka  <hubicka@ucw.cz>

	* doc/invoke.texi (max-inline-insns-small): New parameters.
	* ipa-inline.c (want_early_inline_function_p): simplify.
	(want_inline_small_function_p): Fix pasto from previous patch;
	use max-inline-insns-small bound.
	* params.def (max-inline-insns-small): New param.
	* ipa-fnsummary.c (analyze_function_body): Initialize time/size
	variables correctly.

2019-01-05  Jan Hubicka  <hubicka@ucw.cz>

	* doc/invoke.texi: Document max-inline-insns-size,
	uninlined-function-insns, uninlined-function-time,
	uninlined-thunk-insns and uninlined-thunk-time.
	* params.def: Add max-inline-insns-size,
	uninlined-function-insns, uninlined-function-time,
	uninlined-thunk-insns and uninlined-thunk-time.
	* ipa-fnsummary.c (compute_fn_summary, analyze_function_body): Use
	new parameters.
	* ipa-inline.c (can_inline_edge_by_limits_p,
	want_inline_small_function_p): Use new parameters.

2019-01-05  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-fnsummary.c (analyze_function_body): Fix accounting of time.

2019-01-05  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/82564
	PR target/88620
	* expr.c (expand_assignment): For calls returning VLA structures
	if to_rtx is not a MEM, force it into a stack temporary.

	PR debug/88635
	* dwarf2out.c (const_ok_for_output_1): Reject MINUS that contains
	SYMBOL_REF, CODE_LABEL or UNSPEC in subexpressions of second argument.
	Reject PLUS that contains SYMBOL_REF, CODE_LABEL or UNSPEC in
	subexpressions of both operands.
	(mem_loc_descriptor): Handle UNSPEC if target hook acks it and all the
	subrtxes are CONSTANT_P.
	* config/i386/i386.c (ix86_const_not_ok_for_debug_p): Revert
	2018-11-09 changes.

2019-01-04  Jan Hubicka  <hubicka@ucw.cz>

	* params.def (hot-bb-count-ws-permille): Set to 990.

2019-01-04  Martin Sebor  <msebor@redhat.com>

	PR c/88546
	* attribs.c (decls_mismatched_attributes): Avoid warning for attribute
	leaf.

2019-01-04  Martin Sebor  <msebor@redhat.com>

	PR c/88363
	* doc/extend.texi (attribute alloc_align, alloc_size): Update.

2019-01-04  Jakub Jelinek  <jakub@redhat.com>

	* gdbinit.in: Turn off pagination for the skip commands, restore
	it to previous state afterwards.

2019-01-04  Jakub Jelinek  <jakub@redhat.com>

	PR target/88594
	* config/i386/i386.c (ix86_expand_divmod_libfunc): Use mode instead
	of GET_MODE (opN) as modes of the libcall arguments.

2019-01-04  Jan Beulich  <jbeulich@suse.com>

	* config/i386/sse.md
	(<avx512>_cmp<mode>3<mask_scalar_merge_name><round_saeonly_name>,
	<avx512>_cmp<mode>3<mask_scalar_merge_name>,
	<avx512>_ucmp<mode>3<mask_scalar_merge_name>,
	<avx512>_ucmp<mode>3<mask_scalar_merge_name>,
	avx512f_vmcmp<mode>3<round_saeonly_name>,
	avx512f_vmcmp<mode>3_mask<round_saeonly_name>,
	avx512f_maskcmp<mode>3,
	<avx512>_cvt<ssemodesuffix>2mask<mode>,
	<avx512>_cvt<ssemodesuffix>2mask<mode>,
	*<avx512>_cvtmask2<ssemodesuffix><mode>,
	*<avx512>_cvtmask2<ssemodesuffix><mode>,
	<avx512>_eq<mode>3<mask_scalar_merge_name>_1,
	<avx512>_eq<mode>3<mask_scalar_merge_name>_1,
	<avx512>_gt<mode>3<mask_scalar_merge_name>,
	<avx512>_gt<mode>3<mask_scalar_merge_name>,
	<avx512>_testm<mode>3<mask_scalar_merge_name>,
	<avx512>_testnm<mode>3<mask_scalar_merge_name>,
	*<avx512>_testm<VI1248_AVX512VLBW:mode>3_zext,
	*<avx512>_testm<VI1248_AVX512VLBW:mode>3_zext_mask,
	*<avx512>_testnm<VI1248_AVX512VLBW:mode>3_zext,
	*<avx512>_testnm<VI1248_AVX512VLBW:mode>3_zext_mask,
	avx512cd_maskb_vec_dup<mode>,
	avx512cd_maskw_vec_dup<mode>,
	avx512dq_fpclass<mode><mask_scalar_merge_name>,
	avx512dq_vmfpclass<mode>,
	avx512vl_vpshufbitqmb<mode><mask_scalar_merge_name>): Use =k
	instead of =Yk.

2019-01-03  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/88659
	* calls.c (maybe_warn_nonstring_arg): Avoid assuming maxlen is set.

2019-01-03  Aaron Sawdey  <acsawdey@linux.ibm.com>

	* config/rs6000/rs6000-string.c (expand_block_move): Don't use
	unaligned vsx and avoid lxvd2x/stxvd2x.
	(gen_lvx_v4si_move): New function.

2019-01-03  Tom de Vries  <tdevries@suse.de>

	* config/nvptx/nvptx.c (MACH_VECTOR_LENGTH, MACH_MAX_WORKERS): Define.
	(init_axis_dim, nvptx_mach_max_workers, nvptx_mach_vector_length): New
	function.
	* config/nvptx/nvptx.h (struct machine_function): Add axis_dims.

2019-01-03  Tom de Vries  <tdevries@suse.de>

	* config/nvptx/nvptx.c (struct offload_attrs): New.
	(populate_offload_attrs): New function.  Factor mask extraction out of
	nvptx_reorg.  Add extraction of dimensions.
	(nvptx_reorg): Use populate_offload_attrs.

2019-01-03  Tom de Vries  <tdevries@suse.de>

	* config/nvptx/nvptx.c (nvptx_goacc_validate_dims_1): Add early-out
	cases for oacc_min_dims_p and routine_p.  Add asserts for
	oacc_default_dims_p and offload_region_p.

2019-01-03  Tom de Vries  <tdevries@suse.de>

	* config/nvptx/nvptx.c (nvptx_goacc_validate_dims_1): New function,
	factored out of ...
	(nvptx_goacc_validate_dims): ... here.

2019-01-03  Jan Hubicka  <hubicka@ucw.cz>

	PR tree-optimization/85574
	* tree-ssa-uncprop.c (struct equiv_hash_elt): Remove unused
	structure.
	(struct ssa_equip_hash_traits): Declare.
	(val_ssa_equiv): Use custom hash traits using operand_equal_p.

2019-01-03  Jakub Jelinek  <jakub@redhat.com>

	PR debug/88644
	* dwarf2out.c (modified_type_die): If type is equal to sizetype,
	change it to qualified_type.

2019-01-03  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-utils.c (scale_ipa_profile_for_fn): Break out from ...
	(ipa_merge_profiles): ... here; do not ICE on thunks and aliases.

2019-01-02  Martin Sebor  <msebor@redhat.com>
	    Jeff Law  <law@redhat.com>

	* gimple-fold.c (strlen_range_kind): Remove SRK_LENRANGE_2.
	(get_range_strlen_tree): Update appropriately.
	(get_range_strlen)
	* gimple-fold.h (get_range_strlen): Drop unused last argument.

	* gimple-fold.c (gimple_fold_builtin_strlen): Use set_strlen_range
	rather than set_range_info.
	* tree-ssa-strlen.c (set_strlen_range): Extracted from
	maybe_set_strlen_range.  Handle potentially boundary crossing
	cases more conservatively.
	(maybe_set_strlen_range): Parts refactored into set_strlen_range.
	Call set_strlen_range.
	* tree-ssa-strlen.h (set_strlen_range): Add prototype.

	PR middle-end/88663
	* gimple-fold.c (get_range_strlen): Update prototype to no longer
	need the flexp argument.
	(get_range_strlen_tree): Drop flexp argument.  Drop flexp argument
	from calls to get_range_strlen.  Update comments.  Just update
	VAL for an unterminated const char array and let the reset of the
	code handle it normally.  No longer try to set *flexp.  Adjust
	return value.
	(get_range_strlen): Update for the new get_range_strlen API.
	(get_maxval_strlen): Similarly.
	(gimple_fold_builtin_strlen): Handle update meaning of return value
	from get_range_strlen.
	* gimple-ssa-sprintf.c (get_string_length): Update for the new
	get_range_strlen API.

2019-01-02  Jan Hubicka  <hubicka@ucw.cz>

	PR lto/88130
	* varpool.c (varpool_node::ctor_useable_for_folding_p): Also return
	false at WPA time when body was removed.

2019-01-02  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/88650
	* predict.c (set_even_probabilities): Calculate probability
	remainer only when really used.

2019-01-02  Richard Biener  <rguenther@suse.de>

	PR middle-end/88651
	* tree-data-ref.c (analyze_subscript_affine_affine): Use
	widest_ints when mangling max_stmt_execution results.

2019-01-02  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/88621
	* tree-ssa-loop-im.c (gather_mem_refs_stmt): Fix pastos, avoid
	bitfields when canoncalizing.

2019-01-02  Richard Biener  <rguenther@suse.de>

	PR target/87545
	* config/i386/x86-tune-costs.h (intel_cost): Adjust
	cost of cheap SSE instruction.

2019-01-02  Richard Biener  <rguenther@suse.de>

	PR ipa/85574
	* ipa-icf.h (sem_item_optimizer::sort_congruence_split): Declare.
	* ipa-icf.c (sem_item_optimizer::sort_congruence_split): New
	function.
	(sem_item_optimizer::do_congruence_step_f): Sort the congruence
	set after UIDs before splitting them.

2019-01-01  Martin Sebor  <msebor@redhat.com>
	    Jeff Law  <law@redhat.com>

	* gimple-fold.c (get_range_strlen_tree): Record if the computed
	length is optimistic.  If it is, then arrange to compute the
	conservative length as well.

	* gimple-fold.h (get_range_strlen): Update prototype.
	* builtins.c (check_access): Update call to get_range_strlen to use
	c_strlen_data pointer.   Change various variable accesses to instead
	pull data from the c_strlen_data structure.
	(check_strncat_sizes, expand_builtin_strncat): Likewise.
	* calls.c (maybe_warn_nonstring_arg): Likewise.
	* tree-ssa-strlen.c (maybe_diag_stxncpy_trunc): Likewise.  Reset
	minimum length if maximum lengh is unknown.
	* gimple-ssa-sprintf.c (get_string_length): Likewise.  Drop code
	that used c_strlen, it's no longer needed.  Restructure slightly.
	(format_string): Set unlikely range appropriately.
	* gimple-fold.c (get_range_strlen): Update comments.  Fix minor
	formatting issues.
	(get_range_strlen): Accept c_strlen_data pointer for external
	call sites as well.  Pass through to call to internal get_range_strlen.
	Adjust minlen, maxlen and maxbound as needed.
	(get_maxval_strlen): Update comments.
	(gimple_fold_builtin_strlen): Update call to get_range_strlen
	to use c_strlen_data pointer.  Change variable accesses to instead
	use c_strlen_data data members.

	* gimple-fold.c (get_range_strlen): Update prototype.
	(get_range_strlen_tree): Update prototype.  Drop minlen/maxlen
	local variables.  Use pdata to return information to caller.
	Update calls to get_range_strlen.  Update pdata->maxbound.
	(get_range_strlen -- static version): Similarly.
	(get_range_strlen -- extern version): Update for internal
	get_range_strlen API change.  Convert to external data format.
	(get_maxval_strlen): Similarly.

2019-01-01  Jan Hubicka  <hubicka@ucw.cz>

	* coverage.c (get_coverage_counts): Use current_function_decl.
	* profile.c (read_thunk_profile): New function.
	(branch_prob): Add THUNK parameter.
	* tree-profile.c (tree_profiling): Handle thunks.
	* value-prof.c (init_node_map): Handle thunks.
	* value-prof.h (branch_prob): Upate prototype.
	(read_thunk_profile): Declare.

2019-01-01  Jakub Jelinek  <jakub@redhat.com>

	Update copyright years.

	* gcc.c (process_command): Update copyright notice dates.
	* gcov-dump.c (print_version): Ditto.
	* gcov.c (print_version): Ditto.
	* gcov-tool.c (print_version): Ditto.
	* gengtype.c (create_file): Ditto.
	* doc/cpp.texi: Bump @copying's copyright year.
	* doc/cppinternals.texi: Ditto.
	* doc/gcc.texi: Ditto.
	* doc/gccint.texi: Ditto.
	* doc/gcov.texi: Ditto.
	* doc/install.texi: Ditto.
	* doc/invoke.texi: Ditto.

Copyright (C) 2019 Free Software Foundation, Inc.

Copying and distribution of this file, with or without modification,
are permitted in any medium without royalty provided the copyright
notice and this notice are preserved.