aboutsummaryrefslogtreecommitdiff
path: root/libffi/doc
AgeCommit message (Collapse)AuthorFilesLines
2023-10-22Config,Darwin: Allow for configuring Darwin to use embedded runpath.Iain Sandoe1-2/+2
Recent Darwin versions place contraints on the use of run paths specified in environment variables. This breaks some assumptions in the GCC build. This change allows the user to configure a Darwin build to use '@rpath/libraryname.dylib' in library names and then to add an embedded runpath to executables (and libraries with dependents). The embedded runpath is added by default unless the user adds '-nodefaultrpaths' to the link line. For an installed compiler, it means that any executable built with that compiler will reference the runtimes installed with the compiler (equivalent to hard-coding the library path into the name of the library). During build-time configurations any "-B" entries will be added to the runpath thus the newly-built libraries will be found by exes. Since the install name is set in libtool, that decision needs to be available here (but might also cause dependent ones in Makefiles, so we need to export a conditional). This facility is not available for Darwin 8 or earlier, however the existing environment variable runpath does work there. We default this on for systems where the external DYLD_LIBRARY_PATH does not work and off for Darwin 8 or earlier. For systems that can use either method, if the value is unset, we use the default (which is currently DYLD_LIBRARY_PATH). ChangeLog: * configure: Regenerate. * configure.ac: Do not add default runpaths to GCC exes when we are building -static-libstdc++/-static-libgcc (the default). * libtool.m4: Add 'enable-darwin-at-runpath'. Act on the enable flag to alter Darwin libraries to use @rpath names. gcc/ChangeLog: * aclocal.m4: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. * config/darwin.h: Handle Darwin rpaths. * config/darwin.opt: Handle Darwin rpaths. * Makefile.in: Handle Darwin rpaths. gcc/ada/ChangeLog: * gcc-interface/Makefile.in: Handle Darwin rpaths. gcc/jit/ChangeLog: * Make-lang.in: Handle Darwin rpaths. libatomic/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libbacktrace/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libcc1/ChangeLog: * configure: Regenerate. libffi/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. libgcc/ChangeLog: * config/t-slibgcc-darwin: Generate libgcc_s with an @rpath name. * config.host: Handle Darwin rpaths. libgfortran/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths libgm2/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. * libm2cor/Makefile.am: Handle Darwin rpaths. * libm2cor/Makefile.in: Regenerate. * libm2iso/Makefile.am: Handle Darwin rpaths. * libm2iso/Makefile.in: Regenerate. * libm2log/Makefile.am: Handle Darwin rpaths. * libm2log/Makefile.in: Regenerate. * libm2min/Makefile.am: Handle Darwin rpaths. * libm2min/Makefile.in: Regenerate. * libm2pim/Makefile.am: Handle Darwin rpaths. * libm2pim/Makefile.in: Regenerate. libgomp/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths libitm/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libobjc/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libphobos/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. * libdruntime/Makefile.am: Handle Darwin rpaths. * libdruntime/Makefile.in: Regenerate. * src/Makefile.am: Handle Darwin rpaths. * src/Makefile.in: Regenerate. libquadmath/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libsanitizer/ChangeLog: * asan/Makefile.am: Handle Darwin rpaths. * asan/Makefile.in: Regenerate. * configure: Regenerate. * hwasan/Makefile.am: Handle Darwin rpaths. * hwasan/Makefile.in: Regenerate. * lsan/Makefile.am: Handle Darwin rpaths. * lsan/Makefile.in: Regenerate. * tsan/Makefile.am: Handle Darwin rpaths. * tsan/Makefile.in: Regenerate. * ubsan/Makefile.am: Handle Darwin rpaths. * ubsan/Makefile.in: Regenerate. libssp/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libstdc++-v3/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. * src/Makefile.am: Handle Darwin rpaths. * src/Makefile.in: Regenerate. libvtv/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. lto-plugin/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. zlib/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths.
2021-10-20libffi: Sync with libffi 3.4.2H.J. Lu3-53/+340
Merged commit: f9ea41683444ebe11cfa45b05223899764df28fb
2015-01-28Merge with upstream libffi db1b34b7e1f5e473d17557e454a29933dfecd1afRichard Henderson1-5/+0
Includes build fixes for Solaris and FreeBSD. From-SVN: r220222
2015-01-12Merge libffi to upstream commit c82cc159426d8d4402375fa1ae3f045b9cf82e16Richard Henderson3-12/+153
From-SVN: r219477
2014-02-13re PR libffi/60073 (64-bit libffi.call/cls_double_va.c FAILs after recent ↵Eric Botcazou1-3/+3
modification) PR libffi/60073 * src/sparc/ffitarget.h (FFI_TARGET_SPECIFIC_VARIADIC): Define. (FFI_EXTRA_CIF_FIELDS): Likewise. (FFI_NATIVE_RAW_API): Move around. * src/sparc/ffi.c (ffi_prep_cif_machdep_core): New function from... (ffi_prep_cif_machdep): ...here. Call ffi_prep_cif_machdep_core. (ffi_prep_cif_machdep_var): New function. (ffi_closure_sparc_inner_v9): Do not pass anonymous FP arguments in FP registers. * doc/libffi.texi (Introduction): Fix inaccuracy. From-SVN: r207763
2013-11-18PowerPC64 ELFv2 supportAlan Modra1-14/+17
PowerPC64 ELFv2 support * src/powerpc/ffitarget.h: Import from upstream. * src/powerpc/ffi.c: Likewise. * src/powerpc/linux64.S: Likewise. * src/powerpc/linux64_closure.S: Likewise. * doc/libffi.texi: Likewise. * testsuite/libffi.call/cls_double_va.c: Likewise. * testsuite/libffi.call/cls_longdouble_va.c: Likewise. From-SVN: r204917
2012-12-29* Makefile.am (ACLOCAL_AMFLAGS, TEXINFO_TEX, MAKEINFOFLAGS)Andreas Schwab2-8/+8
(STAMP_GENINSRC, STAMP_BUILD_INFO, CLEANFILES) (MAINTAINERCLEANFILES): Define. (all-local, stamp-geninsrc, stamp-build-info): New targets. (doc/libffi.info): Depend on $(STAMP_BUILD_INFO) * configure.ac: Check for modern makeinfo. Add support for --enable-generated-files-in-srcdir. * libffi/mdate-sh: New file. * testsuite/lib/libffi.exp (load_gcc_lib): Load from gcc testsuite lib dir. (libffi-init): Properly set library paths for multilibs and add path to libstdc++. * configure: Regenerate. * aclocal.m4: Regenerate. * Makefile.in: Regenerate. * doc/stamp-vti: Regenerate. * doc/version.texi: Regenerate. * fficonfig.h.in: Regenerate. * include/Makefile.in: Regenerate. * man/Makefile.in: Regenerate. * testsuite/Makefile.in: Regenerate. From-SVN: r194752
2012-03-04Merge upstream libffiAnthony Green1-7/+31
From-SVN: r184897
2010-08-06Add closure API example to documentationConrad Irwin1-3/+60
From-SVN: r162932
2010-02-24libffi.texi (The Closure API): Fix typo.Rainer Orth2-534/+1
* doc/libffi.texi (The Closure API): Fix typo. * doc/libffi.info: Remove. From-SVN: r157049
2009-12-26Fix libffi docsMatthias Klose1-1/+1
From-SVN: r155471
2009-06-09Import from libffi 3.0.8:Andrew Haley4-0/+1082
2009-06-08 Andrew Haley <aph@redhat.com> Import from libffi 3.0.8: * doc/libffi.texi: New file. * doc/libffi.info: Likewise. * doc/stamp-vti: Likewise. * man/Makefile.am: New file. * man/ffi_call.3: New file. * Makefile.am (EXTRA_DIST): Add src/x86/darwin64.S, src/dlmalloc.c. (nodist_libffi_la_SOURCES): Add X86_FREEBSD. * configure.ac: Bump version to 3.0.8. parisc*-*-linux*: Add. i386-*-freebsd* | i386-*-openbsd*: Add. powerpc-*-beos*: Add. AM_CONDITIONAL X86_FREEBSD: Add. AC_CONFIG_FILES: Add man/Makefile. * include/ffi.h.in (FFI_FN): Change void (*)() to void (*)(void). From-SVN: r148309
generated by cgit v1.1 at 2024-11-03 12:58:36 +0000