Age | Commit message (Collapse) | Author | Files | Lines |
|
We suffer from an inconsistency in the names of uninstalled gnattools
executables in cross-compiler configurations. The cause is a recipe we
have:
ada.all.cross:
for tool in $(ADA_TOOLS) ; do \
if [ -f $$tool$(exeext) ] ; \
then \
$(MV) $$tool$(exeext) $$tool-cross$(exeext); \
fi; \
done
the intent of which is to give the names of gnattools executables the
'-cross' suffix, consistently with the compiler drivers: 'gcc-cross',
'g++-cross', etc.
A problem with the recipe is that this 'make' target is called too early
in the build process, before gnattools have been made. Consequently no
renames happen and owing to that they are conditional on the presence of
the individual executables the recipe succeeds doing nothing.
However if a target is requested later on such as 'make pdf' that does
not cause gnattools executables to be rebuilt, then 'ada.all.cross' does
succeed in renaming the executables already present in the build tree.
Then if the 'gnat' testsuite is run later on which expects non-suffixed
'gnatmake' executable, it does not find the 'gnatmake-cross' executable
in the build tree and may either catastrophically fail or incorrectly
use a system-installed copy of 'gnatmake'.
Of course if a target is requested such as `make all' that does cause
gnattools executables to be rebuilt, then both suffixed and non-suffixed
uninstalled executables result.
Fix the problem by moving the renaming of gnattools to a separate 'make'
recipe, pasted into a new 'gnattools-cross-mv' target and the existing
legacy 'cross-gnattools' target. Then invoke the new target explicitly
from the 'gnattools-cross' recipe in gnattools/.
Update the test harness accordingly, so that suffixed gnattools are used
in cross-compilation testsuite runs.
gcc/ada/
* gcc-interface/Make-lang.in (ada.all.cross): Move recipe to...
(GNATTOOLS_CROSS_MV): ... this new variable.
(cross-gnattools): Paste it here.
(gnattools-cross-mv): New target.
gnattools/
* Makefile.in (gnattools-cross): Also build 'gnattools-cross-mv'
in GCC_DIR.
gcc/testsuite/
* lib/gnat.exp (local_find_gnatmake, find_gnatclean): Use
'-cross' suffix where testing a cross-compiler.
|
|
Closes #102663
ChangeLog:
PR other/102663
* Makefile.def: Handle install-dvi target.
* Makefile.tpl: Likewise.
* Makefile.in: Regenerate.
c++tools/ChangeLog:
PR other/102663
* Makefile.in: Add dummy install-dvi target.
gcc/ChangeLog:
PR other/102663
* Makefile.in: Handle dvidir and install-dvi target.
* configure: Regenerate.
* configure.ac: Add install-dvi to target_list.
gcc/ada/ChangeLog:
PR other/102663
* gcc-interface/Make-lang.in: Allow dvi-formatted
documentation to be installed.
gcc/c/ChangeLog:
PR other/102663
* Make-lang.in: Add dummy c.install-dvi target.
gcc/cp/ChangeLog:
PR other/102663
* Make-lang.in: Add dummy c++.install-dvi target.
gcc/d/ChangeLog:
PR other/102663
* Make-lang.in: Allow dvi-formatted documentation
to be installed.
gcc/fortran/ChangeLog:
PR other/102663
* Make-lang.in: Allow dvi-formatted documentation
to be installed.
gcc/lto/ChangeLog:
PR other/102663
* Make-lang.in: Add dummy lto.install-dvi target.
gcc/objc/ChangeLog:
PR other/102663
* Make-lang.in: Add dummy objc.install-dvi target.
gcc/objcp/ChangeLog:
PR other/102663
* Make-lang.in: Add dummy objc++.install-dvi target.
gnattools/ChangeLog:
PR other/102663
* Makefile.in: Add dummy install-dvi target.
libada/ChangeLog:
PR other/102663
* Makefile.in: Add dummy install-dvi target.
libcpp/ChangeLog:
PR other/102663
* Makefile.in: Add dummy install-dvi target.
libdecnumber/ChangeLog:
PR other/102663
* Makefile.in: Add dummy install-dvi target.
libiberty/ChangeLog:
PR other/102663
* Makefile.in: Allow dvi-formatted documentation
to be installed.
|
|
gcc/ada/
* atree.ads, atree.adb: Major rewrite to support variable-sized
node types. Add pragmas Suppress and Assertion_Policy. We now
have an extra level of indirection: Node_Offsets is a table
mapping Node_Ids to the offset of the start of each node in
Slots. Slots is a table containing one or more contiguous slots
for each node. Each slot is a 32-bit unchecked union that can
contain any mixture of 1, 2, 4, 8, and 32-bit fields that fits.
The old low-level getters and setters (e.g. Flag123) are
removed.
* gen_il-fields.ads, gen_il-gen-gen_entities.adb,
gen_il-gen-gen_nodes.adb, gen_il-gen.adb, gen_il-gen.ads,
gen_il-main.adb, gen_il-types.ads, gen_il-utils.adb,
gen_il-utils.ads, gen_il.adb, gen_il.ads: New gen_il program
that generates various Ada and C++ files. In particular, the
following files are generated by gen_il: einfo-entities.adb
einfo-entities.ads, gnatvsn.ads, nmake.adb, nmake.ads,
seinfo.ads, seinfo_tables.adb, seinfo_tables.ads,
sinfo-nodes.adb, sinfo-nodes.ads, einfo.h, and sinfo.h.
* sinfo-utils.adb, sinfo-utils.ads, einfo-utils.adb,
einfo-utils.ads: New files containing code that needs to refer
to Sinfo.Nodes and Einfo.Entities. This code is mostly moved
here from Sinfo and Einfo to break cycles.
* back_end.adb: Pass node_offsets_ptr and slots_ptr to gigi,
instead of nodes_ptr and flags_ptr. The Nodes and Flags tables
no longer exist. (Note that gigi never used the Flags table.)
* sinfo-cn.ads (Change_Identifier_To_Defining_Identifier,
Change_Character_Literal_To_Defining_Character_Literal,
Change_Operator_Symbol_To_Defining_Operator_Symbol): Turn N into
an IN formal.
* sinfo-cn.adb: Update. Add assertions, which can be removed at
some point. Rewrite to use higher-level facilities. Make sure
vanishing fields are zeroed out. Add with/use for new packages.
* sem_util.adb: Remove "Assert(False)" immediately followed by
"raise Program_Error". Use higher-level facilities such as
Walk_Sinfo_Fields instead of depending on low-level Set_FieldN
routines that no longer exist. Use Get_Comes_From_Source_Default
instead of Default_Node.Comes_From_Source (Default_Node no
longer exists). Use Set_Basic_Convention instead of
Basic_Set_Convention. Add with/use for new packages.
* sem_util.ads: The Convention field had getter Convention and
setter Basic_Set_Convention. Make that more uniform: there is
now a field called Basic_Convention, with Basic_Convention and
Set_Basic_Convention as getter/setter, and write Convention and
Set_Convention here.
* nlists.adb: Rewrite to use abstractions, rather then depending
on low-level implementation details of Atree. Necessary because
those details have changed. Add with/use for new packages.
* sem_ch12.adb: Use higher-level facilities such as
Walk_Sinfo_Fields instead of depending on low-level Set_FieldN
routines that no longer exist. Add with/use for new packages.
* exp_cg.adb, sem_ch10.adb, sem_ch4.adb, sem_eval.adb,
sem_prag.adb, sem_warn.adb: Change expanded names to refer to
the new packages for things that moved. Add with/use for new
packages.
* sem_ch3.adb: Likewise. Reinitialize vanishing fields.
* exp_disp.adb: Likewise. Remove failing assertion.
* sinfo.ads, einfo.ads: Remove code that is now generated into
Sinfo.Nodes and Einfo.Entities.
* sinfo.adb, einfo.adb: Replace bodies with "pragma No_Body;".
We should delete these at some point, but No_Body makes make
files easier. Some code is moved to Sinfo.Nodes, Einfo.Entities,
Sinfo.Utils, and Einfo.Utils. Some is no longer necessary.
* treepr.adb: Rewrite to use new tables. We no longer need
treeprs.ads.
* treepr.ads: Add comment.
* types.ads: Move types Component_Alignment_Kind and
Float_Rep_Kind here.
* atree.h: Major update to match atree.ads changes. Add slot
types, for use by getters/setters.
* types.h: Move types Component_Alignment_Kind and
Float_Rep_Kind here.
* fe.h: Rewrite to deal with code that has changed or moved from
Atree, Sinfo, Einfo.
* nlists.h: Move some code to fe.h.
* alloc.ads: Split Nodes_* constants into Node_Offsets and
Slots, because Atree has two separate tables. Increase values.
Remove Nodes_Release_Threshold. Improve comment.
* debug.adb, gnat1drv.adb: Remove obsolete gnatd.A and gnatd.N
switches. Add with/use for new packages.
* opt.ads: Minor comment fix.
* aspects.adb, checks.adb, comperr.adb, contracts.adb,
cstand.adb, debug_a.adb, errout.adb, eval_fat.adb, exp_aggr.adb,
exp_atag.adb, exp_attr.adb, exp_ch11.adb, exp_ch12.adb,
exp_ch13.adb, exp_ch2.adb, exp_ch3.adb, exp_ch4.adb,
exp_ch5.adb, exp_ch6.adb, exp_ch7.adb, exp_ch8.adb, exp_ch9.adb,
exp_code.adb, exp_dbug.adb, exp_dist.adb, exp_fixd.adb,
exp_imgv.adb, exp_intr.adb, exp_pakd.adb, exp_prag.adb,
exp_put_image.adb, exp_sel.adb, exp_smem.adb, exp_spark.adb,
exp_strm.adb, exp_tss.adb, exp_unst.adb, exp_util.adb,
exp_util.ads, expander.adb, freeze.adb, frontend.adb,
get_targ.ads, ghost.adb, gnat_cuda.adb, impunit.adb, inline.adb,
itypes.adb, itypes.ads, layout.adb, lib.adb, lib-load.adb,
lib-writ.adb, lib-xref.adb, lib-xref.ads,
lib-xref-spark_specific.adb, live.adb, par.adb, par_sco.adb,
pprint.adb, repinfo.adb, restrict.adb, rtsfind.adb, scil_ll.adb,
scn.adb, sem.adb, sem.ads, sem_aggr.adb, sem_attr.adb,
sem_aux.adb, sem_case.adb, sem_cat.adb, sem_ch11.adb,
sem_ch13.adb, sem_ch2.adb, sem_ch5.adb, sem_ch6.adb,
sem_ch7.adb, sem_ch8.adb, sem_ch9.adb, sem_dim.adb,
sem_disp.adb, sem_dist.adb, sem_elab.adb, sem_elim.adb,
sem_intr.adb, sem_mech.adb, sem_res.adb, sem_scil.adb,
sem_smem.adb, sem_type.adb, set_targ.ads, sinput.adb,
sinput-l.adb, sprint.adb, style.adb, styleg.adb, tbuild.adb,
tbuild.ads, uname.adb: Add with/use for new packages.
* libgnat/a-stoubu.adb, libgnat/a-stouut.adb: Simplify to ease
bootstrap.
* libgnat/a-stobfi.adb, libgnat/a-stoufi.adb (Create_File,
Create_New_File): Create file in binary format, to avoid
introducing unwanted text conversions on Windows. Simplify to
ease bootstrap.
* libgnat/a-stteou__bootstrap.ads: New.
* ceinfo.adb, csinfo.adb, nmake.adt, treeprs.adt, xeinfo.adb,
xnmake.adb, xsinfo.adb, xtreeprs.adb: Delete.
* Make-generated.in: Build and run the gen_il program to
generate files. The files are generated in the ada/gen_il
subdirectory, and then moved up to ada. We rely on gnatmake (as
opposed to make) to build the gen_il program efficiently (i.e.
don't do anything if the sources didn't change).
* gcc-interface/Makefile.in (ADAFLAGS): Add -gnatU.
(GNATMAKE_OBJS): Add new object files.
(GENERATED_FILES_FOR_TOOLS): New variable.
(../stamp-tools): Create a link for all
GENERATED_FILES_FOR_TOOLS.
* gcc-interface/Make-lang.in (GNAT_ADA_OBJS): Add new object
files. Remove ada/treeprs.o.
(GNATBIND_OBJS): Add new object files.
(ada.mostlyclean): Remove ada/sdefault.adb and add
ada/stamp-gen_il.
(ada.maintainer-clean): Remove ada/treeprs.ads.
(update-sources): Remove obsolete target.
(ada_generated_files): Rename to...
(ADA_GENERATED_FILES): ... this. Add new source files. Add
comment.
* gcc-interface/trans.c: Remove obsolete Nodes_Ptr and
Flags_ptr. Add Node_Offsets_Ptr and Slots_Ptr, which point to
the corresponding tables in Atree.
* gcc-interface/gigi.h (gigi): New parameters for initializing
Node_Offsets_Ptr and Slots_Ptr.
* gcc-interface/decl.c: Numeric_Kind,
Discrete_Or_Fixed_Point_Kind, and Record_Kind were
nonhierarchical, and were therefore removed for simplicity.
Replace uses with calls to Is_In_... functions.
gnattools/
* Makefile.in (GENERATED_FILES_FOR_TOOLS): New variable.
($(GCC_DIR)/stamp-tools): Walk it for the first copy operation.
|
|
PR ada/81878
Revert
2018-10-29 Tamar Christina <tamar.christina@arm.com>
PR ada/81878
* Makefile.in (TOOLS_FLAGS_TO_PASS_NATIVE): Add -B ../../.
2017-08-17 Richard Biener <rguenther@suse.de>
PR ada/81878
* Makefile.in (CXX_LFLAGS): Remove.
(TOOLS_FLAGS_TO_PASS_NATIVE): Pass $(CXX) as CXX.
(TOOLS_FLAGS_TO_PASS_RE): Likewise.
From-SVN: r265830
|
|
Due to the changes in PR81878 builds of GCC8 and trunk are impossible
with Ada enabled[1][2].
The reason the patch breaks the bootstrap is due to how gnatlink receives it's
arguments.
gnatlink is usually invoked as
$(GNATLINK) -v gnatcmd -o ../../gnat$(exeext) \
--GCC="$(CC) $(ADA_INCLUDES)" --LINK="$(GCC_LINK)" $(TOOLS_LIBS)
so it passes $(CC) and $(GCC_LINK) as quoted arguments to the program.
Because of this quotation the msys2 shell does not translate any paths in
$(CC) and $(GCC_LINK) from their Unix version to their Windows version.
Furthermore because there are multiple paths in the values separated by space
and because the paths often contain a prefix like -L (e.g. -L/f/foo) we can't
use `fix_srcfile_path` to fix this.
An alternative solution would have been to create a stub program that echos the
commandline options it receives back, and calling this program with $(CC) and $(GCC_LINK)
unquoted to get them translated. However this was a bit more invasive.
So instead for native compilations we add -B../../ such that it picks up the lto plugin
from the previous built compiler. Since it's native there shouldn't be a mismatch here.
[1] https://github.com/Alexpux/MINGW-packages/pull/3877#issuecomment-408651809
[2] https://gcc.gnu.org/ml/gcc/2018-07/msg00410.html
gnattools/ChangeLog:
PR ada/81878
* Makefile.in (TOOLS_FLAGS_TO_PASS_NATIVE): Add -B ../../.
From-SVN: r265583
|
|
2017-08-17 Richard Biener <rguenther@suse.de>
PR ada/81878
* Makefile.in (CXX_LFLAGS): Remove.
(TOOLS_FLAGS_TO_PASS_NATIVE): Pass $(CXX) as CXX.
(TOOLS_FLAGS_TO_PASS_RE): Likewise.
From-SVN: r251150
|
|
gnattools/
* configure.ac: Add ACX_NONCANONICAL_HOST.
* configure: Regenerate.
* Makefile.in: Replace host_alias with host_noncanonical.
(gnattools-cross): Do not rename the tools.
gcc/
* configure.ac: Add ACX_NONCANONICAL_HOST.
* configure: Regenerate.
* Makefile.in: Set host_noncanonical.
gcc/ada
* gcc-interface/Make-lang.in (GNATMAKE_FOR_HOST): In the canadian
cross case, use host_noncanonical instead of host as prefix.
(GNATBIND_FOR_HOST): Likewise.
(GNATLINK_FOR_HOST): Likewise.
(GNATLS_FOR_HOST): Likewise.
From-SVN: r236267
|
|
The config.cache file should be deleted by "make distclean", just like
config.log and config.status . The directory itself is still not deleted
(just like the gotools and libcc1 directories).
gnattools/
PR bootstrap/70173
* Makefile.in (distclean): Also delete config.cache .
From-SVN: r234721
|
|
instead" during bootstrap)
gnattools/
PR ada/50048
* Makefile.in (ftop_srcdir): New variable.
(INCLUDES_FOR_SUBDIR): Use -iquote and $(ftop_srcdir).
gcc/ada/
PR ada/50048
* gcc-interface/Makefile.in (INCLUDES): Use -iquote.
From-SVN: r231341
|
|
gnattools/
* Makefile.in (TOOLS_FLAGS_TO_PASS_CROSS): Robustify.
gcc/ada/
* gcc-interface/Make-lang.in (ADA_TOOLS_FLAGS_TO_PASS): Likewise.
From-SVN: r208053
|
|
PR ada/55946
gnattools/
* Makefile.in (host): Define.
(host_alias): Likewise.
(TOOLS_FLAGS_TO_PASS_RE): Add LDFLAGS.
(GNATMAKE_FOR_HOST): Define.
(GNATLINK_FOR_HOST): Likewise.
(GNATBIND_FOR_HOST): Likewise.
(GNATLS_FOR_HOST): Likewise.
(RTS_DIR): Move around and use GNATLS_FOR_HOST.
(TOOLS_FLAGS_TO_PASS_CROSS): Use the other *_HOST variables.
gcc/ada/
* gcc-interface/Make-lang.in (ada/doctools/xgnatugn): Use gnatmake.
* gcc-interface/Makefile.in (GCC_LINK): Add LDFLAGS.
(../../gnatmake): Remove LDFLAGS.
(../../gnatlink): Likewise.
Co-Authored-By: Iain Sandoe <iain@codesourcery.com>
From-SVN: r205945
|
|
delete(void*)')
PR ada/58239
gnattools/
* Makefile.in (CXX_LFLAGS): New.
(TOOLS_FLAGS_TO_PASS_NATIVE): Pass CXX and CXX_LFLAGS.
(TOOLS_FLAGS_TO_PASS_RE): Likewise.
(TOOLS_FLAGS_TO_PASS_CROSS): Pass CXX.
gcc/ada/
* gcc-interface/Makefile.in (GCC_LINK_FLAGS): Add -static-libstdc++.
(GCC_LINK): Use CXX instead of CC.
* gcc-interface/Make-lang.in (CXX_LFLAGS): New.
(ADA_TOOLS_FLAGS_TO_PASS): Pass CXX, and CXX_LFLAGS for native.
Co-Authored-By: Iain Sandoe <iain@codesourcery.com>
From-SVN: r202150
|
|
gnattools/
* Makefile.in (LOOSE_WARN): Delete.
(GCC_WARN_CFLAGS): Set to -W -Wall.
(TOOLS_FLAGS_TO_PASS_1): Delete.
(TOOLS_FLAGS_TO_PASS_1re): Rename into...
(TOOLS_FLAGS_TO_PASS_RE): ...this.
(gnattools-native): Use TOOLS_FLAGS_TO_PASS_NATIVE.
(regnattools): Use TOOLS_FLAGS_TO_PASS_RE.
libada/
* Makefile.in (LOOSE_WARN): Delete.
(GCC_WARN_CFLAGS): Likewise.
(WARN_CFLAGS): Likewise.
(GNATLIBFLAGS): Add -nostdinc.
(GNATLIBCFLAGS_FOR_C): Add -W -Wall.
(LIBADA_FLAGS_TO_PASS): Remove WARN_CFLAGS.
* configure.ac (warn_cflags): Delete.
* configure: Regenerate.
gcc/ada/
* sem_util.adb (Denotes_Same_Prefix): Fix fatal warning.
* gcc-interface/Make-lang.in (WARN_ADAFLAGS): New.
(ALL_ADAFLAGS): Include WARN_ADAFLAGS.
(ADA_FLAGS_TO_PASS): Likewise.
(COMMON_FLAGS_TO_PASS): New.
(ADA_TOOLS_FLAGS_TO_PASS): Use COMMON_FLAGS_TO_PASS. In the regular
native case, also use FLAGS_TO_PASS and ADA_FLAGS_TO_PASS.
(gnatlib): Use COMMON_FLAGS_TO_PASS.
(ada.install-common): Likewise.
(install-gnatlib): Likewise.
(install-gnatlib-obj): Likewise.
(gnattools): Use ADA_TOOLS_FLAGS_TO_PASS for gnattools1 as well.
(gnat-cross): Delete.
(gnatboot): Likewise.
(gnatboot2): Likewise.
(gnatboot3): Likewise.
(gnatstage1): Likewise.
(gnatstage2): Likewise.
* gcc-interface/Makefile.in (SOME_ADAFLAGS): Likewise.
(MOST_ADAFLAGS): Likewise.
(LOOSE_CFLAGS): Likewise.
(gnat-cross): Likewise.
(GNATLIBFLAGS): Add -W -Wall.
(GNATLIBCFLAGS_FOR_C): Likewise.
* gcc-interface/lang.opt: Remove C-specific warnings. Add doc lines.
* gcc-interface/misc.c (gnat_handle_option): Remove obsolete cases.
From-SVN: r179878
|
|
/:
PR other/46202
* configure.ac: Fix just-built in-tree STRIP name to be
binutils/strip-new.
* configure: Regenerate.
* Makefile.def (install-strip-gcc, install-strip-binutils)
(install-strip-opcodes, install-strip-ld, install-strip-itcl)
(install-strip-sid): Mirror dependencies on non-strip variants
of these targets on the respective -strip prerequisites.
* Makefile.tpl (install-strip, install-strip-host)
(install-strip-target): New targets.
(install-strip-[+module+], install-strip-target-[+module+]):
New targets.
* Makefile.in: Regenerate.
gcc/:
PR other/46202
* Makefile.in (install_sh, INSTALL_STRIP_PROGRAM): New
variables.
(AR_FOR_TARGET, RANLIB_FOR_TARGET, STRIP_FOR_TARGET): Fix
shell quoting.
(STRIP_FOR_TARGET): Look for in-tree strip under name strip-new.
(install-strip): New target.
(STRIPPROG): New variable, exported if STRIP is set.
* doc/install.texi (Final install): Minor markup and code style
fixes. Document install-strip target.
fixincludes/:
PR other/46202
* Makefile.in (install-strip): New phony target.
(all, check, install): Also mark as phony.
libgcc/:
PR other/46202
* Makefile.in (install-strip): New phony target.
libiberty/:
PR other/46202
* Makefile.in (install-strip): New phony target.
(install): Also mark as phony.
gnattools/:
PR other/46202
* Makefile.in (install-strip): New phony target.
(check, installcheck, info, dvi, pdf, html, install)
(install-info, install-pdf, install-html, mostlyclean)
(clean, distclean, maintainer-clean): Mark phony.
libada/:
PR other/46202
* Makefile.in (install-strip): New phony target.
(check, installcheck, info, dvi, pdf, html, install)
(install-info, install-pdf, install-html, mostlyclean)
(clean, distclean, maintainer-clean): Mark phony.
From-SVN: r166980
|
|
fixincludes/
* Makefile.in (AUTOCONF, AUTOHEADER, ACLOCAL, ACLOCAL_AMFLAGS):
New variables.
($(srcdir)/configure, $(srcdir)/config.h.in, $(srcdir)/aclocal.m4):
Use them.
gcc/
* Makefile.in (AUTOCONF, ACLOCAL, ACLOCAL_AMFLAGS, aclocal_deps):
New variables.
($(srcdir)/configure, $(srcdir)/aclocal.m4): New rules.
(AUTOHEADER): New variable.
($(srcdir)/cstamp-h.in): Use it.
gnattools/
* Makefile.in (AUTOCONF, configure_deps): New variables.
($(srcdir)/configure): Use them.
libada/
* Makefile.in (AUTOCONF, configure_deps): New variables.
($(srcdir)/configure)): Use them. Also depend on multi.m4.
libgcc/
* configure.ac: Add snippet for maintainer-mode.
* configure: Regenerate.
* Makefile.in (AUTOCONF, configure_deps): New variables.
($(srcdir)/configure)): New rule, active only with maintainer
mode turned on.
libiberty/
* Makefile.in (AUTOCONF, configure_deps): New variables.
($(srcdir)/configure): New rule, active only in maintainer mode.
libobjc/
* Makefile.in (AUTOCONF, ACLOCAL, ACLOCAL_AMFLAGS, aclocal_deps):
New variables.
($(srcdir)/configure, $(srcdir)/aclocal.m4): New rules.
intl/
* Makefile.in (aclocal_deps): New variable.
($(srcdir)/aclocal.m4): Use it, for portable makefile syntax.
libdecnumber/
* Makefile.in (aclocal_deps): New variable.
($(srcdir)/aclocal.m4): Use it, for portable makefile syntax.
From-SVN: r150277
|
|
PR ada/40166
* Makefile.in (TOOLS_TARGET_PAIRS): Use the correct path to the
target specific sources.
From-SVN: r147652
|
|
2009-04-10 Thomas Quinot <quinot@adacore.com>
gnattools/
* Makefile.in: (stamp-tools): Add handling of snames.ad[sb]
ada/
* snames.h, snames.ads, snames.adb: Remove files, now generated from
templates.
* snames.h-tmpl, snames.ads-tmpl, snames.adb-tmpl: Templates for the
above.
* xsnamest.adb: New file.
* gcc-interface/Make-lang.in: New target for automated generation of
snames.ads, snames.adb and snames.h
From-SVN: r145893
|
|
From-SVN: r145841
|
|
gcc/ada/:
* Makefile.in (srcdir): Set to @top_srcdir@ instead of @srcdir@.
* gcc-interface/Makefile.in: Change all uses of $(srcdir),
$(fsrcdir) and $(fsrcpfx) to add ada subdir.
(AWK): Substitute.
(target_cpu_default): Substitute.
gnattools/:
* Makefile.in (fsrcdir): Point to gcc directory, not gcc/ada.
(INCLUDES_FOR_SUBDIR): Adjust.
(ADA_INCLUDES_FOR_SUBDIR): Adjust.
From-SVN: r144463
|
|
gcc:
2008-08-01 Paolo Bonzini <bonzini@gnu.org>
* configure.ac: Do not generate libada-mk. Do not subst
host_cc_for_libada.
* libada-mk.in: Remove.
* Makefile.in: Pass TARGET_LIBGCC2_CFLAGS to libgcc.mvars.
* configure: Regenerate.
libada:
2008-08-01 Paolo Bonzini <bonzini@gnu.org>
* configure.ac (warn_cflags): Substitute.
* configure: Regenerate.
* Makefile.in (libdir, WARN_CFLAGS): Substitute.
(GCC_WARN_CFLAGS): Remove NOCOMMON_FLAG.
(ADA_CFLAGS, T_ADA_CFLAGS, X_ADA_CFLAGS, ALL_ADA_CFLAGS): Remove,
they were unused.
(libada-mk): Do not include. Include libgcc.mvars instead.
(tmake_file): Remove, do not include.
(FLAGS_TO_PASS): Pass dummy values for exeext and CC.
* configure: Regenerate.
gnattools:
2008-08-01 Paolo Bonzini <bonzini@gnu.org>
* configure.ac (warn_cflags): Substitute.
* configure: Regenerate.
* Makefile.in (libdir, exeext, WARN_CFLAGS): Substitute.
(GCC_WARN_CFLAGS): Remove NOCOMMON_FLAG.
(ADA_INCLUDE_DIR, ADA_RTL_OBJ_DIR): Remove as they were unused.
(libsubdir): Remove.
(libada-mk): Do not include. Include libgcc.mvars instead.
(xmake_file): Remove, do not include.
From-SVN: r138479
|
|
2008-07-30 Paolo Bonzini <bonzini@gnu.org>
* configure.ac: Add makefile fragments for hpux.
* Makefile.def (flags_to_pass): Add ADA_CFLAGS.
* Makefile.tpl (HOST_EXPORTS): Pass ADA_CFLAGS.
* configure: Regenerate.
* Makefile.in: Regenerate.
config:
2008-07-30 Paolo Bonzini <bonzini@gnu.org>
* mh-pa: New, from gcc/config/pa/x-ada.
* mh-pa-hpux10: New, from gcc/config/pa/x-ada-hpux10.
gcc:
2008-07-30 Paolo Bonzini <bonzini@gnu.org>
* configure.ac: Substitute ADA_CFLAGS.
* configure: Regenerate.
* config.host: Remove mention of pa/x-ada and pa/x-ada-hpux10 files.
* Makefile.in: Remove mention of X_* variables.
* config/pa/x-ada-hpux10: Remove.
* config/pa/x-ada: Remove.
* doc/fragments.texi: Update.
gcc/ada:
2008-07-30 Paolo Bonzini <bonzini@gnu.org>
* gcc-interface/Make-lang.in (ALL_ADAFLAGS): Remove X_ADAFLAGS and
T_ADAFLAGS, replace ALL_ADA_CFLAGS with ADA_CFLAGS.
(ALL_ADA_CFLAGS): Remove, replace throughout with ADA_CFLAGS.
* gcc-interface/Makefile.in (XCFLAGS, X_CFLAGS, X_CPPFLAGS, T_CPPFLAGS,
X_ADA_CFLAGS, T_ADA_CFLAGS, X_ADAFLAGS, T_ADAFLAGS, ADA_CFLAGS,
ALL_ADA_CFLAGS): Remove.
(ALL_ADAFLAGS, MOST_ADAFLAGS): Remove X_ADAFLAGS and T_ADAFLAGS,
replace ALL_ADA_CFLAGS with ADA_CFLAGS.
(GCC_CFLAGS): Remove X_CFLAGS.
(LOOSE_CFLAGS): Remove X_CFLAGS and XCFLAGS.
(ALL_CPPFLAGS): Remove X_CPPFLAGS and T_CPPFLAGS.
(ADA_CFLAGS): Substitute.
gnattools:
2008-07-30 Paolo Bonzini <bonzini@gnu.org>
* configure.ac (x_ada_cflags): Remove.
(ADA_CFLAGS): Substitute.
* configure: Regenerate.
* Makefile.in (ADA_CFLAGS): Substitute.
(T_ADA_CFLAGS, X_ADA_CFLAGS, ALL_ADA_CFLAGS): Remove.
(TOOLS_FLAGS_TO_PASS_1, TOOLS_FLAGS_TO_PASS_1re,
TOOLS_FLAGS_TO_PASS_NATIVE, TOOLS_FLAGS_TO_PASS_CROSS):
Pass ADA_CFLAGS.
From-SVN: r138301
|
|
gcc/ChangeLog
2008-07-29 Laurent Guerby <laurent@guerby.net>
PR ada/5911
* gnattools/Makefile.in: Replace stamp-gnatlib by
stamp-gnatlib-rts.
gcc/ada/ChangeLog
2008-07-29 Laurent Guerby <laurent@guerby.net>
PR ada/5911
* gcc-interface/Makefile.in (MULTISUBDIR, RTSDIR): New variables.
Pass MULTISUBDIR to recursive make. Use $(RTSDIR) instead of rts.
Replace stamp-gnatlib* by stamp-gnatlib*-rts.
* gcc-interface/Make-lang.in: Replace stamp-gnatlib2
by stamp-gnatlib2-rts.
From-SVN: r138294
|
|
* Makefile.tpl ($(srcdir)/configure): Update dependencies.
* Makefile.in: Regenerate.
* configure: Regenerate.
config/
* override.m4: Use m4_version_prereq throughout.
(_AC_ARG_VAR_VALIDATE, AC_MSG_FAILURE): Backport from git
Autoconf: output pwd along with fatal errors, so the right
config.log file is hinted at more prominently.
(PARSE_ARGS): Push setting of ac_pwd in this diversion.
(_GCC_AUTOCONF_VERSION): New, define to 2.59 if not defined.
(_GCC_AUTOCONF_VERSION_CHECK): New macro, require use of Autoconf
version _GCC_AUTOCONF_VERSION throughout the tree.
(m4_wrap): New override, fix for Posix semantics of m4wrap.
libgcc/
* configure.ac: sinclude override.m4.
* configure: Regenerate.
gnattools/
* configure.ac: move sinclude of acx.m4 before AC_INIT,
also sinclude override.m4.
* Makefile.in ($(srcdir)/configure): Update dependencies.
* configure: Regenerate.
libada/
* configure.ac: move sinclude of acx.m4 before AC_INIT,
also sinclude override.m4.
* Makefile.in ($(srcdir)/configure): Update dependencies.
* configure: Regenerate.
intl/
* configure: Regenerate.
libiberty/
* configure: Regenerate.
boehm-gc/
* Makefile.in: Regenerate.
* configure: Regenerate.
* include/Makefile.in: Regenerate.
* include/gc_config.h.in: Regenerate.
fixincludes/
* configure: Regenerate.
gcc/
* configure: Regenerate.
libcpp/
* Makefile.in ($(srcdir)/aclocal.m4): Update dependencies.
* configure: Regenerate.
libdecnumber/
* Makefile.in ($(srcdir)/aclocal.m4): Update dependencies.
* configure: Regenerate.
libffi/
* configure: Regenerate.
* include/Makefile.in: Regenerate.
* testsuite/Makefile.in: Regenerate.
libgfortran/
* configure: Regenerate.
libgomp/
* configure: Regenerate.
libjava/classpath/
* Makefile.in: Regenerate.
* configure: Regenerate.
* doc/Makefile.in: Regenerate.
* doc/api/Makefile.in: Regenerate.
* examples/Makefile.in: Regenerate.
* external/Makefile.in: Regenerate.
* external/jsr166/Makefile.in: Regenerate.
* external/relaxngDatatype/Makefile.in: Regenerate.
* external/sax/Makefile.in: Regenerate.
* external/w3c_dom/Makefile.in: Regenerate.
* include/Makefile.in: Regenerate.
* lib/Makefile.in: Regenerate.
* native/Makefile.in: Regenerate.
* native/fdlibm/Makefile.in: Regenerate.
* native/jawt/Makefile.in: Regenerate.
* native/jni/Makefile.in: Regenerate.
* native/jni/classpath/Makefile.in: Regenerate.
* native/jni/gconf-peer/Makefile.in: Regenerate.
* native/jni/gstreamer-peer/Makefile.in: Regenerate.
* native/jni/gtk-peer/Makefile.in: Regenerate.
* native/jni/java-io/Makefile.in: Regenerate.
* native/jni/java-lang/Makefile.in: Regenerate.
* native/jni/java-net/Makefile.in: Regenerate.
* native/jni/java-nio/Makefile.in: Regenerate.
* native/jni/java-util/Makefile.in: Regenerate.
* native/jni/midi-alsa/Makefile.in: Regenerate.
* native/jni/midi-dssi/Makefile.in: Regenerate.
* native/jni/native-lib/Makefile.in: Regenerate.
* native/jni/qt-peer/Makefile.in: Regenerate.
* native/jni/xmlj/Makefile.in: Regenerate.
* native/plugin/Makefile.in: Regenerate.
* resource/Makefile.in: Regenerate.
* scripts/Makefile.in: Regenerate.
* tools/Makefile.in: Regenerate.
libjava/
* configure: Regenerate.
* gcj/Makefile.in: Regenerate.
* include/Makefile.in: Regenerate.
* testsuite/Makefile.in: Regenerate.
libjava/libltdl/
* Makefile.in: Regenerate.
* configure: Regenerate.
libmudflap/
* Makefile.in: Regenerate.
* config.h.in: Regenerate.
* configure: Regenerate.
* testsuite/Makefile.in: Regenerate.
libobjc/
* configure: Regenerate.
libssp/
* Makefile.in: Regenerate.
* config.h.in: Regenerate.
* configure: Regenerate.
libstdc++-v3/
* configure: Regenerate.
zlib/
* Makefile.in: Regenerate.
* configure: Regenerate.
From-SVN: r136876
|
|
gcc/ada/Makefile.in
* Makefile.in (GNATTOOLS2_FILES): Replaced by common-tools target
in gcc/ada/Makefile.in
From-SVN: r135639
|
|
target triplet)
PR ada/31808
* Makefile.in (gnattools-cross): Do not build vxaddr2line
From-SVN: r135239
|
|
From-SVN: r134067
|
|
PR ada/28953
* Makefile.in: No longer build gprmake
From-SVN: r124293
|
|
From-SVN: r122444
|
|
variables down)
2007-01-23 Richard Guenther <rguenther@suse.de>
PR bootstrap/30541
* Makefile.def (flags_to_pass): Add GNATBIND and GNATMAKE.
* Makefile.tpl (GNATBIND): Substitute it.
(GNATMAKE): Likewise.
(POSTSTAGE1_FLAGS_TO_PASS): Pass staged GNATBIND instead
of STAGE_PREFIX.
* Makefile.in: Regenerate.
* configure: Regenerate.
config/
* acx.m4 (ACX_PROG_GNAT): Check for gnatmake.
libada/
* Makefile.in (STAGE_PREFIX): Do not define.
(FLAGS_TO_PASS): Do not pass STAGE_PREFIX.
gnattools/
* Makefile.in (STAGE_PREFIX): Do not define.
ada/
* Make-lang.in: Replace invocations of gnatmake with $(GNATMAKE).
(gnatboot2): Pass staged GNATMAKE instead of STAGE_PREFIX.
(gnatboot3): Likewise.
(GNATBIND): Do not define.
* Makefile.in (GNATBIND): Do not define.
From-SVN: r121082
|
|
2006-10-10 Brooks Moses <bmoses@stanford.edu>
* Makefile.def: Added pdf target handling.
* Makefile.tpl: Added pdf target handling.
* Makefile.in: Regenerated.
---fixincludes--------------------------------------------
2006-10-10 Brooks Moses <bmoses@stanford.edu>
* Makefile.in: Added empty "pdf" target.
---gcc----------------------------------------------------
2006-10-10 Brooks Moses <bmoses@stanford.edu>
* configure.ac: Added pdf to "Make-hooks"
* Makefile.in: Added TEXI2PDF definition, and various pdf-file
targets and *.pdf file patterns in cleanup targets.
* configure: Regenerated.
---gcc/cp-------------------------------------------------
2006-10-10 Brooks Moses <bmoses@stanford.edu>
* Make-lang.in: Added "c++.pdf" target support.
---gcc/fortran--------------------------------------------
2006-10-10 Brooks Moses <bmoses@stanford.edu>
* Make-lang.in: Added "fortran.pdf", "gfortran.pdf" target
support.
---gcc/java-----------------------------------------------
2006-10-10 Brooks Moses <bmoses@stanford.edu>
* Make-lang.in: Added "java.pdf", "gcj.pdf" target support.
---gcc/objc-----------------------------------------------
2006-10-10 Brooks Moses <bmoses@stanford.edu>
* Make-lang.in: Added empty "objc.pdf" target.
---gcc/objcp----------------------------------------------
2006-10-10 Brooks Moses <bmoses@stanford.edu>
* Make-lang.in: Added empty "obj-c++.pdf" target.
---gcc/treelang-------------------------------------------
2006-10-10 Brooks Moses <bmoses@stanford.edu>
* Make-lang.in: Added "treelang.pdf" target support.
---gnattools----------------------------------------------
2006-10-10 Brooks Moses <bmoses@stanford.edu>
* Makefile.in: Added empty "pdf" target.
---libcpp-------------------------------------------------
2006-10-10 Brooks Moses <bmoses@stanford.edu>
* Makefile.in: Added empty "pdf" target.
---libdecnumber-------------------------------------------
2006-10-10 Brooks Moses <bmoses@stanford.edu>
* Makefile.in: Added empty "pdf" target.
---libiberty----------------------------------------------
2006-10-10 Brooks Moses <bmoses@stanford.edu>
* Makefile.in: Added "pdf", "libiberty.pdf" target support.
* testsuite/Makefile.in: Added empty "pdf" target.
---libobjc------------------------------------------------
2006-10-10 Brooks Moses <bmoses@stanford.edu>
* Makefile.in: Added empty "pdf" target.
From-SVN: r117618
|
|
2006-06-03 Carlos O'Donell <carlos@codesourcery.com>
* Makefile.in: Add html and install-html targets.
From-SVN: r114345
|
|
PR ada/19959
* Makefile.in (gnattools-cross): Remove incorrect dependency on gnatlib
From-SVN: r97251
|
|
From-SVN: r96181
|
|
Merged from libada-gnattools-branch:
2004-11-28 Nathanael Nerode <neroden@gcc.gnu.org>
* gnattools: New directory.
* Makefile.def: Add gnattools as a module, depending on target-libada.
* Makefile.in: Regenerate.
* configure.in: Include gnattools in host_tools; disable it if ada
is disabled.
* configure: Regenerate.
(gcc)
* configure.ac: Rename cc_for_cross_gnattools to host_cc_for_libada.
* configure: Regenerate.
* libada-mk.in: Remove CC; rename
cc_for_cross_gnattools / cc_set_by_configure to host_cc_for_libada.
(gcc/ada)
Partial merge from libada-gnattools-branch:
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Move gnattools{1,1re,2,3,4} and corresponding flags
into code in gnattools/Makefile.in. Remove direct dependencies on
stamp-tools by tools clauses.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* config-lang.in: Add gnattools to $lang_dirs.
(libada)
2004-12-03 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Add stamp file for building libada, to avoid
duplicate builds every time all-gnattools is called.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Build gcc/ada/Makefile (by running gcc/ada/configure)
here.
2004-08-16 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac: Replace AC_CANONICAL_SYSTEM with _BUILD, _HOST,
_TARGET.
* configure: Regenerate.
2004-07-18 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac, Makefile.in: Remove gnattools-specific code
(see gnattools directory).
* Makefile.in: Remove dead rts-* targets.
* configure: Regenerate.
(gnattools)
2005-02-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Remove use of cc_set_by_configure; just use
plain old CC from the top level in this case.
2005-01-30 Nathanael Nerode <neroden@gcc.gnu.org>
Merge from mainline at tag libada-gnattools-merge-20050129:
* configure.ac: Changes propagated from gcc/ada/Makefile.in.
* Makefile.in: Changes relocated from gcc/ada/Makefile.in.
2004-12-13 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Reinstate stamp-gnatlib check.
2004-12-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Inline gnattools{1,1-re,2,3,4} targets from
gcc/ada/configure.ac into gnattools-native and gnattools-cross
targets, collecting flags as appropriate from here,
gcc/ada/Makefile.in, gcc/ada/configure.ac, etc. Attempt to retain
identical behavior.
* configure.ac: Add necessary configure bits from
gcc/ada/configure.ac.
* configure: Regenerate.
2004-08-16 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.ac: Replace AC_CANONICAL_SYSTEM with _BUILD, _HOST,
_TARGET. Replace _GCC_TOPLEV_NONCANONICAL_TARGET with
ACX_NONCANONICAL_TARGET, and replace now-redundant AC_SUBST.
* configure: Regenerate.
2004-07-18 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in, configure.ac: Remove libada-specific targets and
variables.
* configure: Regenerate.
* New directory, cloned from libada.
From-SVN: r95594
|