diff options
Diffstat (limited to 'libgomp/testsuite/libgomp.oacc-fortran/declare-allocatable-array_descriptor-1-runtime.f90')
-rw-r--r-- | libgomp/testsuite/libgomp.oacc-fortran/declare-allocatable-array_descriptor-1-runtime.f90 | 402 |
1 files changed, 402 insertions, 0 deletions
diff --git a/libgomp/testsuite/libgomp.oacc-fortran/declare-allocatable-array_descriptor-1-runtime.f90 b/libgomp/testsuite/libgomp.oacc-fortran/declare-allocatable-array_descriptor-1-runtime.f90 new file mode 100644 index 0000000..b27f312 --- /dev/null +++ b/libgomp/testsuite/libgomp.oacc-fortran/declare-allocatable-array_descriptor-1-runtime.f90 @@ -0,0 +1,402 @@ +! Test OpenACC 'declare create' with allocatable arrays. + +! { dg-do run } + +! Note that we're not testing OpenACC semantics here, but rather documenting +! current GCC behavior, specifically, behavior concerning updating of +! host/device array descriptors. +! { dg-skip-if n/a { *-*-* } { -DACC_MEM_SHARED=1 } } + +!TODO-OpenACC-declare-allocate +! Missing support for OpenACC "Changes from Version 2.0 to 2.5": +! "The 'declare create' directive with a Fortran 'allocatable' has new behavior". +! Thus, after 'allocate'/before 'deallocate', call 'acc_create'/'acc_delete' +! manually. + + +!TODO { dg-additional-options -fno-inline } for stable results regarding OpenACC 'routine'. + + +!TODO OpenACC 'serial' vs. GCC/nvptx: +!TODO { dg-prune-output {using 'vector_length \(32\)', ignoring 1} } + + +! { dg-additional-options -fdump-tree-original } +! { dg-additional-options -fdump-tree-gimple } + + +module vars + implicit none + integer, parameter :: n1_lb = -3 + integer, parameter :: n1_ub = 6 + integer, parameter :: n2_lb = -9999 + integer, parameter :: n2_ub = 22222 + + integer, allocatable :: b(:) + !$acc declare create (b) + +end module vars + +program test + use vars + use openacc + implicit none + integer :: i + + ! Identifiers for purposes of reliable '-fdump-tree-[...]' scanning. + integer :: id1_1, id1_2 + + interface + + subroutine verify_initial + implicit none + !$acc routine seq + end subroutine verify_initial + + subroutine verify_n1_allocated + implicit none + !$acc routine seq + end subroutine verify_n1_allocated + + subroutine verify_n1_values (addend) + implicit none + !$acc routine gang + integer, value :: addend + end subroutine verify_n1_values + + subroutine verify_n1_deallocated (expect_allocated) + implicit none + !$acc routine seq + logical, value :: expect_allocated + end subroutine verify_n1_deallocated + + subroutine verify_n2_allocated + implicit none + !$acc routine seq + end subroutine verify_n2_allocated + + subroutine verify_n2_values (addend) + implicit none + !$acc routine gang + integer, value :: addend + end subroutine verify_n2_values + + subroutine verify_n2_deallocated (expect_allocated) + implicit none + !$acc routine seq + logical, value :: expect_allocated + end subroutine verify_n2_deallocated + + end interface + + call acc_create (id1_1) + call acc_create (id1_2) + + call verify_initial + ! It is important here (and similarly, following) that there is no data + ! clause for 'b' (explicit or implicit): no 'GOMP_MAP_TO_PSET'. + !$acc serial + call verify_initial + !$acc end serial + + allocate (b(n1_lb:n1_ub)) + call verify_n1_allocated + if (acc_is_present (b)) error stop + call acc_create (b) + ! This is now OpenACC "present": + if (.not.acc_is_present (b)) error stop + ! This still has the initial array descriptor: + !$acc serial + call verify_initial + !$acc end serial + + do i = n1_lb, n1_ub + b(i) = i - 1 + end do + + ! Verify that host-to-device copy doesn't touch the device-side (still + ! initial) array descriptor (but it does copy the array data). + call acc_update_device (b) + !$acc serial + call verify_initial + !$acc end serial + + b = 40 + + ! Verify that device-to-host copy doesn't touch the host-side array + ! descriptor, doesn't copy out the device-side (still initial) array + ! descriptor (but it does copy the array data). + call acc_update_self (b) + call verify_n1_allocated + + do i = n1_lb, n1_ub + if (b(i) /= i - 1) error stop + b(i) = b(i) + 2 + end do + + ! The same using the OpenACC 'update' directive. + + !$acc update device (b) self (id1_1) + ! We do have 'GOMP_MAP_TO_PSET' here: + ! { dg-final { scan-tree-dump-times {(?n)^ *#pragma acc update map\(force_to:\*\(integer\(kind=[0-9]+\)\[0:\] \* restrict\) b\.data \[len: [^\]]+\]\) map\(to:b \[pointer set, len: [0-9]+\]\) map\(alloc:\(integer\(kind=[0-9]+\)\[0:\] \* restrict\) b\.data \[pointer assign, bias: 0\]\) map\(force_from:id1_1\);$} 1 original } } + ! { dg-final { scan-tree-dump-times {(?n)^ *#pragma omp target oacc_update map\(force_to:MEM <integer\(kind=[0-9]+\)\[0:\]> \[\(integer\(kind=[0-9]+\)\[0:\] \*\)[^\]]+\] \[len: [^\]]+\]\) map\(to:b \[pointer set, len: [0-9]+\]\) map\(alloc:b\.data \[pointer assign, bias: 0\]\) map\(force_from:id1_1 \[len: [0-9]+\]\)$} 1 gimple } } + ! ..., but it's silently skipped in 'GOACC_update'. + !$acc serial + call verify_initial + !$acc end serial + + b = 41 + + !$acc update self (b) self (id1_2) + ! We do have 'GOMP_MAP_TO_PSET' here: + ! { dg-final { scan-tree-dump-times {(?n)^ *#pragma acc update map\(force_from:\*\(integer\(kind=[0-9]+\)\[0:\] \* restrict\) b\.data \[len: [^\]]+\]\) map\(to:b \[pointer set, len: [0-9]+\]\) map\(alloc:\(integer\(kind=[0-9]+\)\[0:\] \* restrict\) b\.data \[pointer assign, bias: 0\]\) map\(force_from:id1_2\);$} 1 original } } + ! { dg-final { scan-tree-dump-times {(?n)^ *#pragma omp target oacc_update map\(force_from:MEM <integer\(kind=[0-9]+\)\[0:\]> \[\(integer\(kind=[0-9]+\)\[0:\] \*\)[^\]]+\] \[len: [^\]]+\]\) map\(to:b \[pointer set, len: [0-9]+\]\) map\(alloc:b\.data \[pointer assign, bias: 0\]\) map\(force_from:id1_2 \[len: [0-9]+\]\)$} 1 gimple } } + ! ..., but it's silently skipped in 'GOACC_update'. + call verify_n1_allocated + + do i = n1_lb, n1_ub + if (b(i) /= i + 1) error stop + b(i) = b(i) + 2 + end do + + ! Now install the actual array descriptor, via a data clause for 'b' + ! (explicit or implicit): must get a 'GOMP_MAP_TO_PSET', which then in + ! 'gomp_map_vars_internal' is handled as 'declare target', and because of + ! '*(void **) hostaddrs[i] != NULL', we've got 'has_always_ptrset == true', + ! 'always_to_cnt == 1', and therefore 'gomp_map_vars_existing' does update + ! the 'GOMP_MAP_TO_PSET'. + !$acc serial present (b) copyin (id1_1) + call verify_initial + id1_1 = 0 + !$acc end serial + ! { dg-final { scan-tree-dump-times {(?n)^ *#pragma acc serial map\(force_present:\*\(integer\(kind=[0-9]+\)\[0:\] \* restrict\) b\.data \[len: [^\]]+\]\) map\(to:b \[pointer set, len: [0-9]+\]\) map\(alloc:\(integer\(kind=[0-9]+\)\[0:\] \* restrict\) b\.data \[pointer assign, bias: 0\]\) map\(to:id1_1\)$} 1 original } } + !TODO ..., but without an actual use of 'b', the gimplifier removes the + !TODO 'GOMP_MAP_TO_PSET': + ! { dg-final { scan-tree-dump-times {(?n)^ *#pragma omp target oacc_serial map\(force_present:MEM <integer\(kind=[0-9]+\)\[0:\]> \[\(integer\(kind=[0-9]+\)\[0:\] \*\)[^\]]+\] \[len: [^\]]+\]\) map\(alloc:b\.data \[pointer assign, bias: 0\]\) map\(to:id1_1 \[len: [0-9]+\]\)$} 1 gimple } } + !$acc serial present (b) copyin (id1_2) + call verify_n1_allocated + !TODO Use of 'b': + id1_2 = ubound (b, 1) + !$acc end serial + ! { dg-final { scan-tree-dump-times {(?n)^ *#pragma acc serial map\(force_present:\*\(integer\(kind=[0-9]+\)\[0:\] \* restrict\) b\.data \[len: [^\]]+\]\) map\(to:b \[pointer set, len: [0-9]+\]\) map\(alloc:\(integer\(kind=[0-9]+\)\[0:\] \* restrict\) b\.data \[pointer assign, bias: 0\]\) map\(to:id1_2\)$} 1 original } } + ! { dg-final { scan-tree-dump-times {(?n)^ *#pragma omp target oacc_serial map\(force_present:MEM <integer\(kind=[0-9]+\)\[0:\]> \[\(integer\(kind=[0-9]+\)\[0:\] \*\)[^\]]+\] \[len: [^\]]+\]\) map\(to:b \[pointer set, len: [0-9]+\]\) map\(alloc:b\.data \[pointer assign, bias: 0\]\) map\(to:id1_2 \[len: [0-9]+\]\)$} 1 gimple } } + + !$acc parallel copyin (id1_1) ! No data clause for 'b' (explicit or implicit): no 'GOMP_MAP_TO_PSET'. + call verify_n1_values (1) + id1_1 = 0 + !$acc end parallel + ! { dg-final { scan-tree-dump-times {(?n)^ *#pragma acc parallel map\(to:id1_1\)$} 1 original } } + ! { dg-final { scan-tree-dump-times {(?n)^ *#pragma omp target oacc_parallel map\(to:id1_1 \[len: [0-9]+\]\)$} 1 gimple } } + + !$acc parallel copy (b) copyin (id1_2) + ! As already present, 'copy (b)' doesn't copy; addend is still '1'. + call verify_n1_values (1) + id1_2 = 0 + !$acc end parallel + ! { dg-final { scan-tree-dump-times {(?n)^ *#pragma acc parallel map\(tofrom:\*\(integer\(kind=[0-9]+\)\[0:\] \* restrict\) b\.data \[len: [^\]]+\]\) map\(to:b \[pointer set, len: [0-9]+\]\) map\(alloc:\(integer\(kind=[0-9]+\)\[0:\] \* restrict\) b\.data \[pointer assign, bias: 0\]\) map\(to:id1_2\)$} 1 original } } + !TODO ..., but without an actual use of 'b', the gimplifier removes the + !TODO 'GOMP_MAP_TO_PSET': + ! { dg-final { scan-tree-dump-times {(?n)^ *#pragma omp target oacc_parallel map\(tofrom:MEM <integer\(kind=[0-9]+\)\[0:\]> \[\(integer\(kind=[0-9]+\)\[0:\] \*\)[^\]]+\] \[len: [^\]]+\]\) map\(alloc:b\.data \[pointer assign, bias: 0\]\) map\(to:id1_2 \[len: [0-9]+\]\)$} 1 gimple } } + + call verify_n1_allocated + if (.not.acc_is_present (b)) error stop + + call acc_delete (b) + if (.not.allocated (b)) error stop + if (acc_is_present (b)) error stop + ! The device-side array descriptor doesn't get updated, so 'b' still appears + ! as "allocated": + !$acc serial + call verify_n1_allocated + !$acc end serial + + deallocate (b) + call verify_n1_deallocated (.false.) + ! The device-side array descriptor doesn't get updated, so 'b' still appears + ! as "allocated": + !$acc serial + call verify_n1_allocated + !$acc end serial + + ! Now try to install the actual array descriptor, via a data clause for 'b' + ! (explicit or implicit): must get a 'GOMP_MAP_TO_PSET', which then in + ! 'gomp_map_vars_internal' is handled as 'declare target', but because of + ! '*(void **) hostaddrs[i] == NULL', we've got 'has_always_ptrset == false', + ! 'always_to_cnt == 0', and therefore 'gomp_map_vars_existing' doesn't update + ! the 'GOMP_MAP_TO_PSET'. + ! The device-side array descriptor doesn't get updated, so 'b' still appears + ! as "allocated": + !TODO Why does 'present (b)' still work here? + !$acc serial present (b) copyout (id1_2) + call verify_n1_deallocated (.true.) + !TODO Use of 'b'. + id1_2 = ubound (b, 1) + !$acc end serial + ! { dg-final { scan-tree-dump-times {(?n)^ *#pragma acc serial map\(force_present:\*\(integer\(kind=[0-9]+\)\[0:\] \* restrict\) b\.data \[len: [^\]]+\]\) map\(to:b \[pointer set, len: [0-9]+\]\) map\(alloc:\(integer\(kind=[0-9]+\)\[0:\] \* restrict\) b\.data \[pointer assign, bias: 0\]\) map\(from:id1_2\)$} 1 original } } + ! { dg-final { scan-tree-dump-times {(?n)^ *#pragma omp target oacc_serial map\(force_present:MEM <integer\(kind=[0-9]+\)\[0:\]> \[\(integer\(kind=[0-9]+\)\[0:\] \*\)[^\]]+\] \[len: [^\]]+\]\) map\(to:b \[pointer set, len: [0-9]+\]\) map\(alloc:b\.data \[pointer assign, bias: 0\]\) map\(from:id1_2 \[len: [0-9]+\]\)$} 1 gimple } } + + + ! Restart the procedure, with different array dimensions. + + allocate (b(n2_lb:n2_ub)) + call verify_n2_allocated + if (acc_is_present (b)) error stop + call acc_create (b) + if (.not.acc_is_present (b)) error stop + ! This still has the previous (n1) array descriptor: + !$acc serial + call verify_n1_deallocated (.true.) + !$acc end serial + + do i = n2_lb, n2_ub + b(i) = i + 20 + end do + + call acc_update_device (b) + !$acc serial + call verify_n1_deallocated (.true.) + !$acc end serial + + b = -40 + + call acc_update_self (b) + call verify_n2_allocated + + do i = n2_lb, n2_ub + if (b(i) /= i + 20) error stop + b(i) = b(i) - 40 + end do + + !$acc update device (b) + !$acc serial + call verify_n1_deallocated (.true.) + !$acc end serial + + b = -41 + + !$acc update self (b) + call verify_n2_allocated + + do i = n2_lb, n2_ub + if (b(i) /= i - 20) error stop + b(i) = b(i) + 10 + end do + + !$acc serial present (b) copy (id1_2) + call verify_n2_allocated + !TODO Use of 'b': + id1_2 = ubound (b, 1) + !$acc end serial + + !$acc parallel + call verify_n2_values (-20) + !$acc end parallel + + !$acc parallel copy (b) + call verify_n2_values (-20) + !$acc end parallel + + call verify_n2_allocated + if (.not.acc_is_present (b)) error stop + + call acc_delete (b) + if (.not.allocated (b)) error stop + if (acc_is_present (b)) error stop + !$acc serial + call verify_n2_allocated + !$acc end serial + + deallocate (b) + call verify_n2_deallocated (.false.) + !$acc serial + call verify_n2_allocated + !$acc end serial + + !$acc serial present (b) copy (id1_2) + call verify_n2_deallocated (.true.) + !TODO Use of 'b': + id1_2 = ubound (b, 1) + !$acc end serial + +end program test + + +subroutine verify_initial + use vars + implicit none + !$acc routine seq + + if (allocated (b)) error stop "verify_initial allocated" + if (any (lbound (b) /= [0])) error stop "verify_initial lbound" + if (any (ubound (b) /= [0])) error stop "verify_initial ubound" +end subroutine verify_initial + +subroutine verify_n1_allocated + use vars + implicit none + !$acc routine seq + + if (.not.allocated (b)) error stop "verify_n1_allocated allocated" + if (any (lbound (b) /= [n1_lb])) error stop "verify_n1_allocated lbound" + if (any (ubound (b) /= [n1_ub])) error stop "verify_n1_allocated ubound" +end subroutine verify_n1_allocated + +subroutine verify_n1_values (addend) + use vars + implicit none + !$acc routine gang + integer, value :: addend + integer :: i + + !$acc loop + do i = n1_lb, n1_ub + if (b(i) /= i + addend) error stop + end do +end subroutine verify_n1_values + +subroutine verify_n1_deallocated (expect_allocated) + use vars + implicit none + !$acc routine seq + logical, value :: expect_allocated + + if (allocated(b) .neqv. expect_allocated) error stop "verify_n1_deallocated allocated" + ! Apparently 'deallocate'ing doesn't unset the bounds. + if (any (lbound (b) /= [n1_lb])) error stop "verify_n1_deallocated lbound" + if (any (ubound (b) /= [n1_ub])) error stop "verify_n1_deallocated ubound" +end subroutine verify_n1_deallocated + +subroutine verify_n2_allocated + use vars + implicit none + !$acc routine seq + + if (.not.allocated(b)) error stop "verify_n2_allocated allocated" + if (any (lbound (b) /= [n2_lb])) error stop "verify_n2_allocated lbound" + if (any (ubound (b) /= [n2_ub])) error stop "verify_n2_allocated ubound" +end subroutine verify_n2_allocated + +subroutine verify_n2_values (addend) + use vars + implicit none + !$acc routine gang + integer, value :: addend + integer :: i + + !$acc loop + do i = n2_lb, n2_ub + if (b(i) /= i + addend) error stop + end do +end subroutine verify_n2_values + +subroutine verify_n2_deallocated (expect_allocated) + use vars + implicit none + !$acc routine seq + logical, value :: expect_allocated + + if (allocated(b) .neqv. expect_allocated) error stop "verify_n2_deallocated allocated" + ! Apparently 'deallocate'ing doesn't unset the bounds. + if (any (lbound (b) /= [n2_lb])) error stop "verify_n2_deallocated lbound" + if (any (ubound (b) /= [n2_ub])) error stop "verify_n2_deallocated ubound" +end subroutine verify_n2_deallocated |