diff options
Diffstat (limited to 'libffi/configure')
| -rwxr-xr-x | libffi/configure | 132 |
1 files changed, 124 insertions, 8 deletions
diff --git a/libffi/configure b/libffi/configure index 9eac9c9..2905455 100755 --- a/libffi/configure +++ b/libffi/configure @@ -667,6 +667,8 @@ MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE READELF +ENABLE_DARWIN_AT_RPATH_FALSE +ENABLE_DARWIN_AT_RPATH_TRUE CXXCPP CPP OTOOL64 @@ -810,6 +812,7 @@ with_pic enable_fast_install with_gnu_ld enable_libtool_lock +enable_darwin_at_rpath enable_maintainer_mode enable_pax_emutramp enable_debug @@ -1465,6 +1468,9 @@ Optional Features: --enable-fast-install[=PKGS] optimize for fast installation [default=yes] --disable-libtool-lock avoid locking (might break parallel builds) + --enable-darwin-at-rpath + install libraries with @rpath/library-name, requires + rpaths to be added to executables --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer @@ -7835,7 +7841,7 @@ $as_echo "$lt_cv_ld_force_load" >&6; } # darwin 5.x (macOS 10.1) onwards we only need to adjust when the # deployment target is forced to an earlier version. case ${MACOSX_DEPLOYMENT_TARGET-UNSET},$host in - UNSET,*-darwin[89]*|UNSET,*-darwin[12][0123456789]*) + UNSET,*-darwin[89]*|UNSET,*-darwin[12][0-9]*) ;; 10.[012][,.]*) _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' @@ -9809,6 +9815,49 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi darwin* | rhapsody*) + + # Publish an arg to allow the user to select that Darwin host (and target) + # libraries should be given install-names like @rpath/libfoo.dylib. This + # requires that the user of the library then adds an 'rpath' to the DSO that + # needs access. + # NOTE: there are defaults below, for systems that support rpaths. The person + # configuring can override the defaults for any system version that supports + # them - they are, however, forced off for system versions without support. + # Check whether --enable-darwin-at-rpath was given. +if test "${enable_darwin_at_rpath+set}" = set; then : + enableval=$enable_darwin_at_rpath; if test "x$enable_darwin_at_rpath" = "xyes"; then + # This is not supported before macOS 10.5 / Darwin9. + case ${MACOSX_DEPLOYMENT_TARGET-UNSET},$host_os in + UNSET,darwin[4-8]*|UNSET,rhapsody*|10.[0-4][,.]*) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Darwin @rpath library names are incompatible with OSX versions earlier than 10.5 (rpaths disabled)" >&5 +$as_echo "$as_me: WARNING: Darwin @rpath library names are incompatible with OSX versions earlier than 10.5 (rpaths disabled)" >&2;} + enable_darwin_at_rpath=no + ;; + esac + fi +else + case ${MACOSX_DEPLOYMENT_TARGET-UNSET},$host_os in + # As above, before 10.5 / Darwin9 this does not work. + UNSET,darwin[4-8]*|UNSET,rhapsody*|10.[0-4][,.]*) + enable_darwin_at_rpath=no + ;; + + # We cannot build and test reliably on macOS 10.11+ (Darwin15+) without use + # of rpaths, since runpaths set via DYLD_LIBRARY_PATH are elided by key + # system executables (e.g. /bin/sh). Force rpaths on for these systems. + UNSET,darwin1[5-9]*|UNSET,darwin2*|10.1[1-9][,.]*|1[1-9].*[,.]* ) + { $as_echo "$as_me:${as_lineno-$LINENO}: @rpath library names are needed on macOS versions later than 10.11 (rpaths have been enabled)" >&5 +$as_echo "$as_me: @rpath library names are needed on macOS versions later than 10.11 (rpaths have been enabled)" >&6;} + enable_darwin_at_rpath=yes + ;; + # NOTE: we are not (yet) doing anything for 10.5 .. 10.10, since they can + # work with either DYLD_LIBRARY_PATH or embedded rpaths. + + esac + +fi + + archive_cmds_need_lc=no hardcode_direct=no hardcode_automatic=yes @@ -9826,9 +9875,13 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi esac if test "$_lt_dar_can_shared" = "yes"; then output_verbose_link_cmd=func_echo_all - archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" + _lt_install_name='\$rpath/\$soname' + if test "x$enable_darwin_at_rpath" = "xyes"; then + _lt_install_name='@rpath/\$soname' + fi + archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name ${_lt_install_name} \$verstring ${_lt_dsymutil}" module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" - archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" + archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name ${_lt_install_name} \$verstring ${_lt_dar_export_syms}${_lt_dsymutil}" module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" else @@ -11634,7 +11687,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 11637 "configure" +#line 11690 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -11740,7 +11793,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 11743 "configure" +#line 11796 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -12616,6 +12669,49 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi darwin* | rhapsody*) + + # Publish an arg to allow the user to select that Darwin host (and target) + # libraries should be given install-names like @rpath/libfoo.dylib. This + # requires that the user of the library then adds an 'rpath' to the DSO that + # needs access. + # NOTE: there are defaults below, for systems that support rpaths. The person + # configuring can override the defaults for any system version that supports + # them - they are, however, forced off for system versions without support. + # Check whether --enable-darwin-at-rpath was given. +if test "${enable_darwin_at_rpath+set}" = set; then : + enableval=$enable_darwin_at_rpath; if test "x$enable_darwin_at_rpath" = "xyes"; then + # This is not supported before macOS 10.5 / Darwin9. + case ${MACOSX_DEPLOYMENT_TARGET-UNSET},$host_os in + UNSET,darwin[4-8]*|UNSET,rhapsody*|10.[0-4][,.]*) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Darwin @rpath library names are incompatible with OSX versions earlier than 10.5 (rpaths disabled)" >&5 +$as_echo "$as_me: WARNING: Darwin @rpath library names are incompatible with OSX versions earlier than 10.5 (rpaths disabled)" >&2;} + enable_darwin_at_rpath=no + ;; + esac + fi +else + case ${MACOSX_DEPLOYMENT_TARGET-UNSET},$host_os in + # As above, before 10.5 / Darwin9 this does not work. + UNSET,darwin[4-8]*|UNSET,rhapsody*|10.[0-4][,.]*) + enable_darwin_at_rpath=no + ;; + + # We cannot build and test reliably on macOS 10.11+ (Darwin15+) without use + # of rpaths, since runpaths set via DYLD_LIBRARY_PATH are elided by key + # system executables (e.g. /bin/sh). Force rpaths on for these systems. + UNSET,darwin1[5-9]*|UNSET,darwin2*|10.1[1-9][,.]*|1[1-9].*[,.]* ) + { $as_echo "$as_me:${as_lineno-$LINENO}: @rpath library names are needed on macOS versions later than 10.11 (rpaths have been enabled)" >&5 +$as_echo "$as_me: @rpath library names are needed on macOS versions later than 10.11 (rpaths have been enabled)" >&6;} + enable_darwin_at_rpath=yes + ;; + # NOTE: we are not (yet) doing anything for 10.5 .. 10.10, since they can + # work with either DYLD_LIBRARY_PATH or embedded rpaths. + + esac + +fi + + archive_cmds_need_lc_CXX=no hardcode_direct_CXX=no hardcode_automatic_CXX=yes @@ -12633,12 +12729,20 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi esac if test "$_lt_dar_can_shared" = "yes"; then output_verbose_link_cmd=func_echo_all - archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" + _lt_install_name='\$rpath/\$soname' + if test "x$enable_darwin_at_rpath" = "xyes"; then + _lt_install_name='@rpath/\$soname' + fi + archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name ${_lt_install_name} \$verstring ${_lt_dsymutil}" module_cmds_CXX="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" - archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" + archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name ${_lt_install_name} \$verstring ${_lt_dar_export_syms}${_lt_dsymutil}" module_expsym_cmds_CXX="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" if test "$lt_cv_apple_cc_single_mod" != "yes"; then - archive_cmds_CXX="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" + _lt_install_name='\$rpath/\$soname' + if test "x$enable_darwin_at_rpath" = "xyes"; then + _lt_install_name='@rpath/\$soname' + fi + archive_cmds_CXX="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name ${_lt_install_name} \$verstring${_lt_dsymutil}" archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" fi @@ -15008,6 +15112,14 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu # Only expand once: + if test x$enable_darwin_at_rpath = xyes; then + ENABLE_DARWIN_AT_RPATH_TRUE= + ENABLE_DARWIN_AT_RPATH_FALSE='#' +else + ENABLE_DARWIN_AT_RPATH_TRUE='#' + ENABLE_DARWIN_AT_RPATH_FALSE= +fi + if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}readelf", so it can be a program name with args. @@ -17153,6 +17265,10 @@ if test -z "${am__fastdepCCAS_TRUE}" && test -z "${am__fastdepCCAS_FALSE}"; then as_fn_error $? "conditional \"am__fastdepCCAS\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi +if test -z "${ENABLE_DARWIN_AT_RPATH_TRUE}" && test -z "${ENABLE_DARWIN_AT_RPATH_FALSE}"; then + as_fn_error $? "conditional \"ENABLE_DARWIN_AT_RPATH\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then as_fn_error $? "conditional \"MAINTAINER_MODE\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 |