user.cfg.in: Update to doxygen 1.8.2.

2012-09-30  Benjamin Kosnik  <bkoz@redhat.com>

	* doc/doxygen/user.cfg.in: Update to doxygen 1.8.2.

From-SVN: r191876

1 files changed, 65 insertions, 56 deletions

diff --git a/libstdc++-v3/doc/doxygen/user.cfg.in b/libstdc++-v3/doc/doxygen/user.cfg.in
index b9fc4bf..3bf306f 100644
--- a/libstdc++-v3/doc/doxygen/user.cfg.in
+++ b/libstdc++-v3/doc/doxygen/user.cfg.in
@@ -1,4 +1,4 @@
-# Doxyfile 1.8.0
+# Doxyfile 1.8.2
 
 # This file describes the settings to be used by the documentation system
 # doxygen (www.doxygen.org) for a project.
@@ -126,7 +126,9 @@ FULL_PATH_NAMES        = NO
 # only done if one of the specified strings matches the left-hand part of
 # the path. The tag can be used to show relative paths in the file list.
 # If left blank the directory from which doxygen is run is used as the
-# path to strip.
+# path to strip. Note that you specify absolute paths here, but also
+# relative paths, which will be relative from the directory where doxygen is
+# started.
 
 STRIP_FROM_PATH        =
 
@@ -231,14 +233,15 @@ OPTIMIZE_FOR_FORTRAN   = NO
 OPTIMIZE_OUTPUT_VHDL   = NO
 
 # Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given extension.
-# Doxygen has a built-in mapping, but you can override or extend it using this
-# tag. The format is ext=language, where ext is a file extension, and language
-# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
-# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
-# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
-# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
-# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+# parses. With this tag you can assign which parser to use for a given
+# extension. Doxygen has a built-in mapping, but you can override or extend it
+# using this tag. The format is ext=language, where ext is a file extension,
+# and language is one of the parsers supported by doxygen: IDL, Java,
+# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C,
+# C++. For instance to make doxygen treat .inc files as Fortran files (default
+# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note
+# that for custom extensions you also need to set FILE_PATTERNS otherwise the
+# files are not read by doxygen.
 
 EXTENSION_MAPPING      =
 
@@ -251,6 +254,13 @@ EXTENSION_MAPPING      =
 
 MARKDOWN_SUPPORT       = YES
 
+# When enabled doxygen tries to link words that correspond to documented classes,
+# or namespaces to their corresponding documentation. Such a link can be
+# prevented in individual cases by by putting a % sign in front of the word or
+# globally by setting AUTOLINK_SUPPORT to NO.
+
+AUTOLINK_SUPPORT       = YES
+
 # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
 # to include (a tag file for) the STL sources as input, then you should
 # set this tag to YES in order to let doxygen match functions declarations and
@@ -271,12 +281,7 @@ CPP_CLI_SUPPORT        = NO
 
 SIP_SUPPORT            = NO
 
-# For Microsoft's IDL there are propget and propput attributes to indicate getter
-# and setter methods for a property. Setting this option to YES (the default)
-# will make doxygen replace the get and set methods by a property in the
-# documentation. This will only work if the methods are indeed getting or
-# setting a simple type. If this is not the case, or you want to show the
-# methods anyway, you should set this option to NO.
+# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO.
 
 IDL_PROPERTY_SUPPORT   = NO
 
@@ -300,7 +305,8 @@ SUBGROUPING            = YES
 # @ingroup) instead of on a separate page (for HTML and Man pages) or
 # section (for LaTeX and RTF).
 
-INLINE_GROUPED_CLASSES = NO
+#INLINE_GROUPED_CLASSES = NO
+INLINE_GROUPED_CLASSES = YES
 
 # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and
 # unions with only public data fields will be shown inline in the documentation
@@ -308,7 +314,7 @@ INLINE_GROUPED_CLASSES = NO
 # documentation), provided this scope is documented. If set to NO (the default),
 # structs, classes, and unions are shown on a separate page (for HTML and Man
 # pages) or section (for LaTeX and RTF).
-
+ 
 INLINE_SIMPLE_STRUCTS  = NO
 
 # When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
@@ -364,7 +370,8 @@ EXTRACT_ALL            = NO
 
 EXTRACT_PRIVATE        = NO
 
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation.
+# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
+# scope will be included in the documentation.
 
 EXTRACT_PACKAGE        = NO
 
@@ -555,12 +562,6 @@ MAX_INITIALIZER_LINES  = 0
 
 SHOW_USED_FILES        = YES
 
-# If the sources in your project are distributed over multiple directories
-# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
-# in the documentation. The default is NO.
-
-SHOW_DIRECTORIES       = YES
-
 # Set the SHOW_FILES tag to NO to disable the generation of the Files page.
 # This will remove the Files entry from the Quick Index and from the
 # Folder Tree View (if specified). The default is YES.
@@ -586,7 +587,7 @@ FILE_VERSION_FILTER    =
 
 # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
 # by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. The create the layout file
+# output files in an output format independent way. To create the layout file
 # that represents doxygen's defaults, run doxygen with the -l option.
 # You can optionally specify a file name after the option, if omitted
 # DoxygenLayout.xml will be used as the name of the layout file.
@@ -969,7 +970,7 @@ INLINE_SOURCES         = NO
 
 # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
 # doxygen to hide any special comment blocks from generated source code
-# fragments. Normal C and C++ comments will always remain visible.
+# fragments. Normal C, C++ and Fortran comments will always remain visible.
 
 STRIP_CODE_COMMENTS    = NO
 
@@ -1072,13 +1073,23 @@ HTML_FOOTER            =
 
 # The HTML_STYLESHEET tag can be used to specify a user-defined cascading
 # style sheet that is used by each HTML page. It can be used to
-# fine-tune the look of the HTML output. If the tag is left blank doxygen
-# will generate a default style sheet. Note that doxygen will try to copy
-# the style sheet file to the HTML output directory, so don't put your own
-# style sheet in the HTML output directory as well, or it will be erased!
+# fine-tune the look of the HTML output. If left blank doxygen will
+# generate a default style sheet. Note that it is recommended to use
+# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this
+# tag will in the future become obsolete.
 
 HTML_STYLESHEET        =
 
+# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional
+# user-defined cascading style sheet that is included after the standard
+# style sheets created by doxygen. Using this option one can overrule
+# certain style aspects. This is preferred over using HTML_STYLESHEET
+# since it does not replace the standard style sheet and is therefor more
+# robust against future updates. Doxygen will copy the style sheet file to
+# the output directory.
+
+HTML_EXTRA_STYLESHEET  =
+
 # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
 # other source files which should be copied to the HTML output directory. Note
 # that these files will be copied to the base HTML output directory. Use the
@@ -1119,19 +1130,22 @@ HTML_COLORSTYLE_GAMMA  = 80
 
 HTML_TIMESTAMP         = NO
 
-# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
-# files or namespaces will be aligned in HTML using tables. If set to
-# NO a bullet list will be used.
-
-HTML_ALIGN_MEMBERS     = NO
-
 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
 # documentation will contain sections that can be hidden and shown after the
-# page has loaded. For this to work a browser that supports
-# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
-# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+# page has loaded.
+
+HTML_DYNAMIC_SECTIONS  = YES
+
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of
+# entries shown in the various tree structured indices initially; the user
+# can expand and collapse entries dynamically later on. Doxygen will expand
+# the tree to such a level that at most the specified number of entries are
+# visible (unless a fully collapsed tree already exceeds this amount).
+# So setting the number of entries 1 will produce a full collapsed tree by
+# default. 0 is a special value representing an infinite number of entries
+# and will result in a full expanded tree by default.
 
-HTML_DYNAMIC_SECTIONS  = NO
+HTML_INDEX_NUM_ENTRIES = 100
 
 # If the GENERATE_DOCSET tag is set to YES, additional index files
 # will be generated that can be used as input for Apple's Xcode 3
@@ -1160,9 +1174,9 @@ DOCSET_FEEDNAME        = "Doxygen generated docs"
 
 DOCSET_BUNDLE_ID       = org.gnu.libstdc++
 
-# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely
+# identify the documentation publisher. This should be a reverse domain-name
+# style string, e.g. com.mycompany.MyDocSet.documentation.
 
 DOCSET_PUBLISHER_ID    = org.fsf
 
@@ -1311,11 +1325,6 @@ GENERATE_TREEVIEW      = YES
 
 ENUM_VALUES_PER_LINE   = 4
 
-# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
-# and Class Hierarchy pages using a tree view instead of an ordered list.
-
-USE_INLINE_TREES       = NO
-
 # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
 # used to set the initial width (in pixels) of the frame in which the tree
 # is shown.
@@ -1410,7 +1419,7 @@ LATEX_OUTPUT           = latex
 # generating bitmaps for formulas in the HTML output, but not in the
 # Makefile that is written to the output directory.
 
-LATEX_CMD_NAME         = latex
+LATEX_CMD_NAME         =
 
 # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
 # generate index for LaTeX. If left blank `makeindex' will be used as the
@@ -1422,7 +1431,7 @@ MAKEINDEX_CMD_NAME     = makeindex
 # LaTeX documents. This may be useful for small projects and may help to
 # save some trees in general.
 
-COMPACT_LATEX          = NO
+COMPACT_LATEX          =  YES
 
 # The PAPER_TYPE tag can be used to set the paper type that is used
 # by the printer. Possible values are: a4, letter, legal and
@@ -1712,7 +1721,7 @@ PREDEFINED             = __cplusplus \
                          _GLIBCXX_DEPRECATED \
                          _GLIBCXX_CONSTEXPR=constexpr \
                          _GLIBCXX_USE_CONSTEXPR=constexpr \
-			 "_GLIBCXX_THROW(E)= " \
+                         "_GLIBCXX_THROW(E)= " \
                          _GLIBCXX_NOEXCEPT=noexcept \
                          _GLIBCXX_NOTHROW=noexcept \
                          _GLIBCXX_USE_NOEXCEPT=noexcept \
@@ -1726,7 +1735,7 @@ PREDEFINED             = __cplusplus \
                          ATOMIC_INT_LOCK_FREE \
                          PB_DS_DATA_TRUE_INDICATOR \
                          PB_DS_STATIC_ASSERT=// \
-			 "_GLIBCXX_BEGIN_NAMESPACE_ALGO= " \
+                         "_GLIBCXX_BEGIN_NAMESPACE_ALGO= " \
                          __glibcxx_function_requires=// \
                          __glibcxx_class_requires=// \
                          __glibcxx_class_requires2=// \
@@ -1925,7 +1934,7 @@ CALLER_GRAPH           = NO
 
 GRAPHICAL_HIERARCHY    = YES
 
-# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES
 # then doxygen will show the dependencies a directory has on other directories
 # in a graphical way. The dependency relations are determined by the #include
 # relations between the files in the directories.
@@ -1938,7 +1947,7 @@ DIRECTORY_GRAPH        = YES
 # HTML_FILE_EXTENSION to xhtml in order to make the SVG files
 # visible in IE 9+ (other browsers do not have this requirement).
 
-DOT_IMAGE_FORMAT       = png
+DOT_IMAGE_FORMAT       = svg
 
 # If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
 # enable generation of interactive SVG images that allow zooming and panning.
@@ -1947,7 +1956,7 @@ DOT_IMAGE_FORMAT       = png
 # need to set HTML_FILE_EXTENSION to xhtml in order to make the SVG files
 # visible. Older versions of IE do not have SVG support.
 
-INTERACTIVE_SVG        = NO
+INTERACTIVE_SVG        = YES
 
 # The tag DOT_PATH can be used to specify the path where the dot tool can be
 # found. If left blank, it is assumed the dot tool can be found in the path.