RISC-V: Implement TLS Descriptors.

This implements TLS Descriptors (TLSDESC) as specified in [1].

The 4-instruction sequence is implemented as a single RTX insn for
simplicity, but this can be revisited later if instruction scheduling or
more flexible RA is desired.

The default remains to be the traditional TLS model, but can be configured
with --with-tls={trad,desc}. The choice can be revisited once toolchain
and libc support ships.

[1]: https://github.com/riscv-non-isa/riscv-elf-psabi-doc/pull/373.

gcc/ChangeLog:

	* config/riscv/riscv.opt: Add -mtls-dialect to configure TLS flavor.
	* config.gcc: Add --with-tls configuration option to change the
	default TLS flavor.
	* config/riscv/riscv.h: Add TARGET_TLSDESC determined from
	-mtls-dialect and with_tls defaults.
	* config/riscv/riscv-opts.h: Define enum riscv_tls_type for the
	two TLS flavors.
	* config/riscv/riscv-protos.h: Define SYMBOL_TLSDESC symbol type.
	* config/riscv/riscv.md: Add instruction sequence for TLSDESC.
	* config/riscv/riscv.cc (riscv_symbol_insns): Add instruction
	sequence length data for TLSDESC.
	(riscv_legitimize_tls_address): Add lowering of TLSDESC.
	* doc/install.texi: Document --with-tls for RISC-V.
	* doc/invoke.texi: Document -mtls-dialect for RISC-V.

gcc/testsuite/ChangeLog:

	* gcc.target/riscv/tls_1.x: Add TLSDESC GD test case.
	* gcc.target/riscv/tlsdesc.c: Same as above.

11 files changed, 115 insertions, 11 deletions

diff --git a/gcc/config.gcc b/gcc/config.gcc
index e62f98e..2e320dd 100644
--- a/gcc/config.gcc
+++ b/gcc/config.gcc
@@ -2492,6 +2492,7 @@ riscv*-*-linux*)
 	# Force .init_array support.  The configure script cannot always
 	# automatically detect that GAS supports it, yet we require it.
 	gcc_cv_initfini_array=yes
+	with_tls=${with_tls:-trad}
 	;;
 riscv*-*-elf* | riscv*-*-rtems*)
 	tm_file="elfos.h newlib-stdint.h ${tm_file} riscv/elf.h"
@@ -2534,6 +2535,7 @@ riscv*-*-freebsd*)
 	# Force .init_array support.  The configure script cannot always
 	# automatically detect that GAS supports it, yet we require it.
 	gcc_cv_initfini_array=yes
+	with_tls=${with_tls:-trad}
 	;;
 
 loongarch*-*-linux*)
@@ -4671,7 +4673,7 @@ case "${target}" in
 		;;
 
 	riscv*-*-*)
-		supported_defaults="abi arch tune riscv_attribute isa_spec"
+		supported_defaults="abi arch tune riscv_attribute isa_spec tls"
 
 		case "${target}" in
 		riscv-* | riscv32*) xlen=32 ;;
@@ -4801,6 +4803,17 @@ case "${target}" in
 				;;
 			esac
 		fi
+		# Handle --with-tls.
+		case "$with_tls" in
+		"" \
+		| trad | desc)
+			# OK
+			;;
+		*)
+			echo "Unknown TLS method used in --with-tls=$with_tls" 1>&2
+			exit 1
+			;;
+		esac
 
 		# Handle --with-multilib-list.
 		if test "x${with_multilib_list}" != xdefault; then
diff --git a/gcc/config/riscv/riscv-opts.h b/gcc/config/riscv/riscv-opts.h
index 392b916..1b2dd57 100644
--- a/gcc/config/riscv/riscv-opts.h
+++ b/gcc/config/riscv/riscv-opts.h
@@ -154,4 +154,10 @@ enum rvv_vector_bits_enum {
 #define TARGET_MAX_LMUL                                                        \
   (int) (rvv_max_lmul == RVV_DYNAMIC ? RVV_M8 : rvv_max_lmul)
 
+/* TLS types.  */
+enum riscv_tls_type {
+  TLS_TRADITIONAL,
+  TLS_DESCRIPTORS
+};
+
 #endif /* ! GCC_RISCV_OPTS_H */
diff --git a/gcc/config/riscv/riscv-protos.h b/gcc/config/riscv/riscv-protos.h
index 4677d9c..5d46a29 100644
--- a/gcc/config/riscv/riscv-protos.h
+++ b/gcc/config/riscv/riscv-protos.h
@@ -34,9 +34,10 @@ enum riscv_symbol_type {
   SYMBOL_TLS,
   SYMBOL_TLS_LE,
   SYMBOL_TLS_IE,
-  SYMBOL_TLS_GD
+  SYMBOL_TLS_GD,
+  SYMBOL_TLSDESC,
 };
-#define NUM_SYMBOL_TYPES (SYMBOL_TLS_GD + 1)
+#define NUM_SYMBOL_TYPES (SYMBOL_TLSDESC + 1)
 
 /* Classifies an address.
 
diff --git a/gcc/config/riscv/riscv.cc b/gcc/config/riscv/riscv.cc
index 2a71bad..00defa6 100644
--- a/gcc/config/riscv/riscv.cc
+++ b/gcc/config/riscv/riscv.cc
@@ -1072,6 +1072,7 @@ static int riscv_symbol_insns (enum riscv_symbol_type type)
     case SYMBOL_ABSOLUTE: return 2; /* LUI + the reference.  */
     case SYMBOL_PCREL: return 2; /* AUIPC + the reference.  */
     case SYMBOL_TLS_LE: return 3; /* LUI + ADD TP + the reference.  */
+    case SYMBOL_TLSDESC: return 6; /* 4-instruction call + ADD TP + the reference.  */
     case SYMBOL_GOT_DISP: return 3; /* AUIPC + LD GOT + the reference.  */
     case SYMBOL_FORCE_TO_MEM: return 3; /* AUIPC + LD + the reference.  */
     default: gcc_unreachable ();
@@ -2220,7 +2221,7 @@ riscv_call_tls_get_addr (rtx sym, rtx result)
 static rtx
 riscv_legitimize_tls_address (rtx loc)
 {
-  rtx dest, tp, tmp;
+  rtx dest, tp, tmp, a0;
   enum tls_model model = SYMBOL_REF_TLS_MODEL (loc);
 
 #if 0
@@ -2236,9 +2237,24 @@ riscv_legitimize_tls_address (rtx loc)
       /* Rely on section anchors for the optimization that LDM TLS
 	 provides.  The anchor's address is loaded with GD TLS. */
     case TLS_MODEL_GLOBAL_DYNAMIC:
-      tmp = gen_rtx_REG (Pmode, GP_RETURN);
-      dest = gen_reg_rtx (Pmode);
-      emit_libcall_block (riscv_call_tls_get_addr (loc, tmp), dest, tmp, loc);
+      if (TARGET_TLSDESC)
+	{
+	  static unsigned seqno;
+	  tp = gen_rtx_REG (Pmode, THREAD_POINTER_REGNUM);
+	  a0 = gen_rtx_REG (Pmode, GP_ARG_FIRST);
+	  dest = gen_reg_rtx (Pmode);
+
+	  emit_insn (gen_tlsdesc (Pmode, loc, GEN_INT (seqno)));
+	  emit_insn (gen_add3_insn (dest, a0, tp));
+	  seqno++;
+	}
+      else
+	{
+	  tmp = gen_rtx_REG (Pmode, GP_RETURN);
+	  dest = gen_reg_rtx (Pmode);
+	  emit_libcall_block (riscv_call_tls_get_addr (loc, tmp), dest, tmp,
+			      loc);
+	}
       break;
 
     case TLS_MODEL_INITIAL_EXEC:
diff --git a/gcc/config/riscv/riscv.h b/gcc/config/riscv/riscv.h
index d577951..269b8c1 100644
--- a/gcc/config/riscv/riscv.h
+++ b/gcc/config/riscv/riscv.h
@@ -64,6 +64,7 @@ extern const char *riscv_arch_help (int argc, const char **argv);
    --with-abi is ignored if -mabi is specified.
    --with-tune is ignored if -mtune or -mcpu is specified.
    --with-isa-spec is ignored if -misa-spec is specified.
+   --with-tls is ignored if -mtls-dialect is specified.
 
    But using default -march/-mtune value if -mcpu don't have valid option.  */
 #define OPTION_DEFAULT_SPECS \
@@ -73,8 +74,9 @@ extern const char *riscv_arch_help (int argc, const char **argv);
   {"arch", "%{!march=*:"						\
 	   "  %{!mcpu=*:-march=%(VALUE)}"				\
 	   "  %{mcpu=*:%:riscv_expand_arch_from_cpu(%* %(VALUE))}}" },	\
-  {"abi", "%{!mabi=*:-mabi=%(VALUE)}" }, \
-  {"isa_spec", "%{!misa-spec=*:-misa-spec=%(VALUE)}" }, \
+  {"abi", "%{!mabi=*:-mabi=%(VALUE)}" },				\
+  {"isa_spec", "%{!misa-spec=*:-misa-spec=%(VALUE)}" },			\
+  {"tls", "%{!mtls-dialect=*:-mtls-dialect=%(VALUE)}"},         	\
 
 #ifdef IN_LIBGCC2
 #undef TARGET_64BIT
@@ -1228,4 +1230,7 @@ extern void riscv_remove_unneeded_save_restore_calls (void);
 #define HAVE_POST_MODIFY_DISP TARGET_XTHEADMEMIDX
 #define HAVE_PRE_MODIFY_DISP  TARGET_XTHEADMEMIDX
 
+/* Check TLS Descriptors mechanism is selected.  */
+#define TARGET_TLSDESC (riscv_tls_dialect == TLS_DESCRIPTORS)
+
 #endif /* ! GCC_RISCV_H */
diff --git a/gcc/config/riscv/riscv.md b/gcc/config/riscv/riscv.md
index 0346cc3..c2b4323 100644
--- a/gcc/config/riscv/riscv.md
+++ b/gcc/config/riscv/riscv.md
@@ -48,7 +48,7 @@
   UNSPEC_TLS_LE
   UNSPEC_TLS_IE
   UNSPEC_TLS_GD
-
+  UNSPEC_TLSDESC
   ;; High part of PC-relative address.
   UNSPEC_AUIPC
 
@@ -2089,6 +2089,24 @@
    (set_attr "type" "load")
    (set_attr "mode" "<MODE>")])
 
+(define_insn "@tlsdesc<mode>"
+  [(set (reg:P A0_REGNUM)
+	    (unspec:P
+			[(match_operand:P 0 "symbolic_operand" "")
+			 (match_operand:P 1 "const_int_operand")]
+			UNSPEC_TLSDESC))
+   (clobber (reg:P T0_REGNUM))]
+  "TARGET_TLSDESC"
+  {
+    return ".LT%1: auipc\ta0,%%tlsdesc_hi(%0)\;"
+           "<load>\tt0,%%tlsdesc_load_lo(.LT%1)(a0)\;"
+           "addi\ta0,a0,%%tlsdesc_add_lo(.LT%1)\;"
+           "jalr\tt0,t0,%%tlsdesc_call(.LT%1)";
+  }
+  [(set_attr "type" "multi")
+   (set_attr "length" "16")
+   (set_attr "mode" "<MODE>")])
+
 (define_insn "auipc<mode>"
   [(set (match_operand:P           0 "register_operand" "=r")
 	(unspec:P
diff --git a/gcc/config/riscv/riscv.opt b/gcc/config/riscv/riscv.opt
index 7d625af..8da0764 100644
--- a/gcc/config/riscv/riscv.opt
+++ b/gcc/config/riscv/riscv.opt
@@ -606,3 +606,17 @@ Enum(rvv_vector_bits) String(zvl) Value(RVV_VECTOR_BITS_ZVL)
 mrvv-vector-bits=
 Target RejectNegative Joined Enum(rvv_vector_bits) Var(rvv_vector_bits) Init(RVV_VECTOR_BITS_SCALABLE)
 -mrvv-vector-bits=<string>	Set the kind of bits for an RVV vector register.
+
+Enum
+Name(tls_type) Type(enum riscv_tls_type)
+The possible TLS dialects:
+
+EnumValue
+Enum(tls_type) String(trad) Value(TLS_TRADITIONAL)
+
+EnumValue
+Enum(tls_type) String(desc) Value(TLS_DESCRIPTORS)
+
+mtls-dialect=
+Target RejectNegative Joined Enum(tls_type) Var(riscv_tls_dialect) Init(TLS_TRADITIONAL) Save
+Specify TLS dialect.
diff --git a/gcc/doc/install.texi b/gcc/doc/install.texi
index 970b1a6..1c58dc3 100644
--- a/gcc/doc/install.texi
+++ b/gcc/doc/install.texi
@@ -1187,6 +1187,9 @@ Specify the default TLS dialect, for systems were there is a choice.
 For ARM targets, possible values for @var{dialect} are @code{gnu} or
 @code{gnu2}, which select between the original GNU dialect and the GNU TLS
 descriptor-based dialect.
+For RISC-V targets, possible values for @var{dialect} are @code{trad} or
+@code{desc}, which select between the traditional GNU dialect and the GNU TLS
+descriptor-based dialect.
 
 @item --enable-multiarch
 Specify whether to enable or disable multiarch support.  The default is
diff --git a/gcc/doc/invoke.texi b/gcc/doc/invoke.texi
index 1006510..f5f5d83 100644
--- a/gcc/doc/invoke.texi
+++ b/gcc/doc/invoke.texi
@@ -1265,7 +1265,8 @@ See RS/6000 and PowerPC Options.
 -minline-atomics  -mno-inline-atomics
 -minline-strlen  -mno-inline-strlen
 -minline-strcmp  -mno-inline-strcmp
--minline-strncmp  -mno-inline-strncmp}
+-minline-strncmp  -mno-inline-strncmp
+-mtls-dialect=desc  -mtls-dialect=trad}
 
 @emph{RL78 Options}
 @gccoptlist{-msim  -mmul=none  -mmul=g13  -mmul=g14  -mallregs
@@ -31063,6 +31064,16 @@ which register to use as base register for reading the canary,
 and from what offset from that base register. There is no default
 register or offset as this is entirely for use within the Linux
 kernel.
+
+@opindex mtls-dialect=desc
+@item -mtls-dialect=desc
+Use TLS descriptors as the thread-local storage mechanism for dynamic accesses
+of TLS variables.
+
+@opindex mtls-dialect=trad
+@item -mtls-dialect=trad
+Use traditional TLS as the thread-local storage mechanism for dynamic accesses
+of TLS variables.  This is the default.
 @end table
 
 @node RL78 Options
diff --git a/gcc/testsuite/gcc.target/riscv/tls_1.x b/gcc/testsuite/gcc.target/riscv/tls_1.x
new file mode 100644
index 0000000..cf334ef
--- /dev/null
+++ b/gcc/testsuite/gcc.target/riscv/tls_1.x
@@ -0,0 +1,5 @@
+extern __thread unsigned gd;
+
+unsigned get() {
+	return gd;
+}
diff --git a/gcc/testsuite/gcc.target/riscv/tlsdesc.c b/gcc/testsuite/gcc.target/riscv/tlsdesc.c
new file mode 100644
index 0000000..f9ac9fe
--- /dev/null
+++ b/gcc/testsuite/gcc.target/riscv/tlsdesc.c
@@ -0,0 +1,12 @@
+/* { dg-require-effective-target tls_native } */
+/* { dg-options "-O2 -fpic -mtls-dialect=desc --save-temps" } */
+/* { dg-require-effective-target fpic } */
+
+#include "tls_1.x"
+
+/* { dg-final { scan-assembler-times "auipc\t\[a-x0-9\]+,%tlsdesc_hi" 1 } } */
+/* { dg-final { scan-assembler-times "lw\t\[a-x0-9\]+,%tlsdesc_load_lo" 1 { target { rv32 } } } } */
+/* { dg-final { scan-assembler-times "ld\t\[a-x0-9\]+,%tlsdesc_load_lo" 1 { target { rv64 } } } }*/
+/* { dg-final { scan-assembler-times "addi\ta0,\[a-x0-9\]+,%tlsdesc_add_lo" 1 } } */
+/* { dg-final { scan-assembler-times "jalr\tt0,\[a-x0-9\]+,%tlsdesc_call" 1 } } */
+/* { dg-final { cleanup-saved-temps } } */