configure.ac (gcc_gxx_include_dir): Use $(libsubdir_to_prefix).

gcc/
	* configure.ac (gcc_gxx_include_dir): Use $(libsubdir_to_prefix).
	(gcc_tooldir): Likewise.
	* configure: Regenerate.
	* Makefile.in (libsubdir_to_prefix): New variable, based on the
	old configure.ac gcc_tooldir setting.
	(prefix_to_exec_prefix): New variable.
	(DRIVER_DEFINES): Use $(libsubdir_to_prefix)$(prefix_to_exec_prefix)
	rather than $(unlibsubdir)/../ to derive TOOLDIR_BASE_PREFIX.

From-SVN: r126225

4 files changed, 46 insertions, 75 deletions

diff --git a/gcc/ChangeLog b/gcc/ChangeLog
index fc2aac6..f651d00 100644
--- a/gcc/ChangeLog
+++ b/gcc/ChangeLog
@@ -1,3 +1,14 @@
+2007-07-02  Richard Sandiford  <richard@codesourcery.com>
+
+	* configure.ac (gcc_gxx_include_dir): Use $(libsubdir_to_prefix).
+	(gcc_tooldir): Likewise.
+	* configure: Regenerate.
+	* Makefile.in (libsubdir_to_prefix): New variable, based on the
+	old configure.ac gcc_tooldir setting.
+	(prefix_to_exec_prefix): New variable.
+	(DRIVER_DEFINES): Use $(libsubdir_to_prefix)$(prefix_to_exec_prefix)
+	rather than $(unlibsubdir)/../ to derive TOOLDIR_BASE_PREFIX.
+
 2007-07-02  Daniel Berlin  <dberlin@dberlin.org>
 
 	Fix PR tree-optimization/32583
diff --git a/gcc/Makefile.in b/gcc/Makefile.in
index 7c48cda..61c5185 100644
--- a/gcc/Makefile.in
+++ b/gcc/Makefile.in
@@ -458,6 +458,36 @@ libsubdir = $(libdir)/gcc/$(target_noncanonical)/$(version)
 libexecsubdir = $(libexecdir)/gcc/$(target_noncanonical)/$(version)
 # Used to produce a relative $(gcc_tooldir) in gcc.o
 unlibsubdir = ../../..
+# $(prefix), expressed as a path relative to $(libsubdir).
+#
+# An explanation of the sed strings:
+#  -e 's|^$(prefix)||'   matches and eliminates 'prefix' from 'exec_prefix'
+#  -e 's|/$$||'          match a trailing forward slash and eliminates it
+#  -e 's|^[^/]|/|'       forces the string to start with a forward slash (*)
+#  -e 's|/[^/]*|../|g'   replaces each occurrence of /<directory> with ../
+#
+# (*) Note this pattern overwrites the first character of the string
+# with a forward slash if one is not already present.  This is not a
+# problem because the exact names of the sub-directories concerned is
+# unimportant, just the number of them matters.
+#
+# The practical upshot of these patterns is like this:
+#
+#  prefix     exec_prefix        result
+#  ------     -----------        ------
+#   /foo        /foo/bar          ../
+#   /foo/       /foo/bar          ../
+#   /foo        /foo/bar/         ../
+#   /foo/       /foo/bar/         ../
+#   /foo        /foo/bar/ugg      ../../
+libsubdir_to_prefix := \
+  $(unlibsubdir)/$(shell echo "$(libdir)" | \
+    sed -e 's|^$(prefix)||' -e 's|/$$||' -e 's|^[^/]|/|' \
+        -e 's|/[^/]*|../|g')
+# $(exec_prefix), expressed as a path relative to $(prefix).
+prefix_to_exec_prefix := \
+  $(shell echo "$(exec_prefix)" | \
+    sed -e 's|^$(prefix)||' -e 's|^/||' -e '/./s|$$|/|')
 # Directory in which to find other cross-compilation tools and headers.
 dollar = @dollar@
 # Used in install-cross.
@@ -1791,7 +1821,7 @@ DRIVER_DEFINES = \
   -DDEFAULT_TARGET_VERSION=\"$(version)\" \
   -DDEFAULT_TARGET_MACHINE=\"$(target_noncanonical)\" \
   -DSTANDARD_BINDIR_PREFIX=\"$(bindir)/\" \
-  -DTOOLDIR_BASE_PREFIX=\"$(unlibsubdir)/../\" \
+  -DTOOLDIR_BASE_PREFIX=\"$(libsubdir_to_prefix)$(prefix_to_exec_prefix)\" \
   @TARGET_SYSTEM_ROOT_DEFINE@ \
   $(VALGRIND_DRIVER_DEFINES) \
   `test "X$${SHLIB_LINK}" = "X" || test "@enable_shared@" != "yes" || echo "-DENABLE_SHARED_LIBGCC"` \
diff --git a/gcc/configure b/gcc/configure
index c50bf8c..2981115 100755
--- a/gcc/configure
+++ b/gcc/configure
@@ -1688,7 +1688,7 @@ if test x${gcc_gxx_include_dir} = x; then
     if test x$host != x$target; then
        libstdcxx_incdir="$target_alias/$libstdcxx_incdir"
     fi
-    gcc_gxx_include_dir="\$(libsubdir)/\$(unlibsubdir)/..\`echo \$(exec_prefix) | sed -e 's|^\$(prefix)||' -e 's|/[^/]*|/..|g'\`/$libstdcxx_incdir"
+    gcc_gxx_include_dir="\$(libsubdir)/\$(libsubdir_to_prefix)$libstdcxx_incdir"
   fi
 fi
 
@@ -16855,40 +16855,7 @@ if test "x$subdirs" != x; then
 fi
 echo "source ${srcdir}/gdbinit.in" >> .gdbinit
 
-# If $(exec_prefix) exists and is not the same as $(prefix), then compute an
-# absolute path for gcc_tooldir based on inserting the number of up-directory
-# movements required to get from $(exec_prefix) to $(prefix) into the basic
-# $(libsubdir)/@(unlibsubdir) based path.
-# Don't set gcc_tooldir to tooldir since that's only passed in by the toplevel
-# make and thus we'd get different behavior depending on where we built the
-# sources.
-if test x$exec_prefix = xNONE -o x$exec_prefix = x$prefix; then
-    gcc_tooldir='$(libsubdir)/$(unlibsubdir)/../$(target_noncanonical)'
-else
-# An explanation of the sed strings:
-#  -e 's|^\$(prefix)||'   matches and eliminates 'prefix' from 'exec_prefix'
-#  -e 's|/$||'            match a trailing forward slash and eliminates it
-#  -e 's|^[^/]|/|'        forces the string to start with a forward slash (*)
-#  -e 's|/[^/]*|../|g'    replaces each occurrence of /<directory> with ../
-#
-# (*) Note this pattern overwrites the first character of the string
-# with a forward slash if one is not already present.  This is not a
-# problem because the exact names of the sub-directories concerned is
-# unimportant, just the number of them matters.
-#
-# The practical upshot of these patterns is like this:
-#
-#  prefix     exec_prefix        result
-#  ------     -----------        ------
-#   /foo        /foo/bar          ../
-#   /foo/       /foo/bar          ../
-#   /foo        /foo/bar/         ../
-#   /foo/       /foo/bar/         ../
-#   /foo        /foo/bar/ugg      ../../
-#
-    dollar='$$'
-    gcc_tooldir="\$(libsubdir)/\$(unlibsubdir)/\`echo \$(exec_prefix) | sed -e 's|^\$(prefix)||' -e 's|/\$(dollar)||' -e 's|^[^/]|/|' -e 's|/[^/]*|../|g'\`\$(target_noncanonical)"
-fi
+gcc_tooldir='$(libsubdir)/$(libsubdir_to_prefix)$(target_noncanonical)'
 
 
 
diff --git a/gcc/configure.ac b/gcc/configure.ac
index 56a986a..2ec7c31 100644
--- a/gcc/configure.ac
+++ b/gcc/configure.ac
@@ -141,9 +141,7 @@ if test x${gcc_gxx_include_dir} = x; then
     if test x$host != x$target; then
        libstdcxx_incdir="$target_alias/$libstdcxx_incdir"
     fi
-changequote(<<, >>)dnl
-    gcc_gxx_include_dir="\$(libsubdir)/\$(unlibsubdir)/..\`echo \$(exec_prefix) | sed -e 's|^\$(prefix)||' -e 's|/[^/]*|/..|g'\`/$libstdcxx_incdir"
-changequote([, ])dnl
+    gcc_gxx_include_dir="\$(libsubdir)/\$(libsubdir_to_prefix)$libstdcxx_incdir"
   fi
 fi
 
@@ -3603,42 +3601,7 @@ if test "x$subdirs" != x; then
 fi
 echo "source ${srcdir}/gdbinit.in" >> .gdbinit
 
-# If $(exec_prefix) exists and is not the same as $(prefix), then compute an
-# absolute path for gcc_tooldir based on inserting the number of up-directory
-# movements required to get from $(exec_prefix) to $(prefix) into the basic
-# $(libsubdir)/@(unlibsubdir) based path.
-# Don't set gcc_tooldir to tooldir since that's only passed in by the toplevel
-# make and thus we'd get different behavior depending on where we built the
-# sources.
-if test x$exec_prefix = xNONE -o x$exec_prefix = x$prefix; then
-    gcc_tooldir='$(libsubdir)/$(unlibsubdir)/../$(target_noncanonical)'
-else
-changequote(<<, >>)dnl
-# An explanation of the sed strings:
-#  -e 's|^\$(prefix)||'   matches and eliminates 'prefix' from 'exec_prefix'
-#  -e 's|/$||'            match a trailing forward slash and eliminates it
-#  -e 's|^[^/]|/|'        forces the string to start with a forward slash (*)
-#  -e 's|/[^/]*|../|g'    replaces each occurrence of /<directory> with ../
-#
-# (*) Note this pattern overwrites the first character of the string
-# with a forward slash if one is not already present.  This is not a
-# problem because the exact names of the sub-directories concerned is
-# unimportant, just the number of them matters.
-#
-# The practical upshot of these patterns is like this:
-#
-#  prefix     exec_prefix        result
-#  ------     -----------        ------
-#   /foo        /foo/bar          ../
-#   /foo/       /foo/bar          ../
-#   /foo        /foo/bar/         ../
-#   /foo/       /foo/bar/         ../
-#   /foo        /foo/bar/ugg      ../../
-#
-    dollar='$$'
-    gcc_tooldir="\$(libsubdir)/\$(unlibsubdir)/\`echo \$(exec_prefix) | sed -e 's|^\$(prefix)||' -e 's|/\$(dollar)||' -e 's|^[^/]|/|' -e 's|/[^/]*|../|g'\`\$(target_noncanonical)"
-changequote([, ])dnl
-fi
+gcc_tooldir='$(libsubdir)/$(libsubdir_to_prefix)$(target_noncanonical)'
 AC_SUBST(gcc_tooldir)
 AC_SUBST(dollar)