configure: Implement --enable-host-pie

[ This is my third attempt to add this configure option.  The first
version was approved but it came too late in the development cycle.
The second version was also approved, but I had to revert it:
<https://gcc.gnu.org/pipermail/gcc-patches/2022-November/607082.html>.
I've fixed the problem (by moving $(PICFLAG) from INTERNAL_CFLAGS to
ALL_COMPILERFLAGS).  Another change is that since r13-4536 I no longer
need to touch Makefile.def, so this patch is simplified. ]

This patch implements the --enable-host-pie configure option which
makes the compiler executables PIE.  This can be used to enhance
protection against ROP attacks, and can be viewed as part of a wider
trend to harden binaries.

It is similar to the option --enable-host-shared, except that --e-h-s
won't add -shared to the linker flags whereas --e-h-p will add -pie.
It is different from --enable-default-pie because that option just
adds an implicit -fPIE/-pie when the compiler is invoked, but the
compiler itself isn't PIE.

Since r12-5768-gfe7c3ecf, PCH works well with PIE, so there are no PCH
regressions.

When building the compiler, the build process may use various in-tree
libraries; these need to be built with -fPIE so that it's possible to
use them when building a PIE.  For instance, when --with-included-gettext
is in effect, intl object files must be compiled with -fPIE.  Similarly,
when building in-tree gmp, isl, mpfr and mpc, they must be compiled with
-fPIE.

With this patch and --enable-host-pie used to configure gcc:

$ file gcc/cc1{,plus,obj,gm2} gcc/f951 gcc/lto1 gcc/cpp gcc/go1 gcc/rust1 gcc/gnat1
gcc/cc1:     ELF 64-bit LSB pie executable, x86-64, version 1 (GNU/Linux), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, BuildID[sha1]=98e22cde129d304aa6f33e61b1c39e144aeb135e, for GNU/Linux 3.2.0, with debug_info, not stripped
gcc/cc1plus: ELF 64-bit LSB pie executable, x86-64, version 1 (GNU/Linux), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, BuildID[sha1]=859d1ea37e43dfe50c18fd4e3dd9a34bb1db8f77, for GNU/Linux 3.2.0, with debug_info, not stripped
gcc/cc1obj:  ELF 64-bit LSB pie executable, x86-64, version 1 (GNU/Linux), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, BuildID[sha1]=1964f8ecee6163182bc26134e2ac1f324816e434, for GNU/Linux 3.2.0, with debug_info, not stripped
gcc/cc1gm2:  ELF 64-bit LSB pie executable, x86-64, version 1 (GNU/Linux), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, BuildID[sha1]=a396672c7ff913d21855829202e7b02ecf42ff4c, for GNU/Linux 3.2.0, with debug_info, not stripped
gcc/f951:    ELF 64-bit LSB pie executable, x86-64, version 1 (GNU/Linux), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, BuildID[sha1]=59c523db893186547ac75c7a71f48be0a461c06b, for GNU/Linux 3.2.0, with debug_info, not stripped
gcc/lto1:    ELF 64-bit LSB pie executable, x86-64, version 1 (GNU/Linux), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, BuildID[sha1]=084a7b77df7be2d63c2d4c655b5bbc3fcdb6038d, for GNU/Linux 3.2.0, with debug_info, not stripped
gcc/cpp:     ELF 64-bit LSB pie executable, x86-64, version 1 (GNU/Linux), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, BuildID[sha1]=3503bf8390d219a10d6653b8560aa21158132168, for GNU/Linux 3.2.0, with debug_info, not stripped
gcc/go1:     ELF 64-bit LSB pie executable, x86-64, version 1 (GNU/Linux), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, BuildID[sha1]=988cc673af4fba5dcb482f4b34957b99050a68c5, for GNU/Linux 3.2.0, with debug_info, not stripped
gcc/rust1:   ELF 64-bit LSB pie executable, x86-64, version 1 (GNU/Linux), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, BuildID[sha1]=b6a5d3d514446c4dcdee0707f086ab9b274a8a3c, for GNU/Linux 3.2.0, with debug_info, not stripped
gcc/gnat1:   ELF 64-bit LSB pie executable, x86-64, version 1 (GNU/Linux), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, BuildID[sha1]=bb11ccdc2c366fe3fe0980476bcd8ca19b67f9dc, for GNU/Linux 3.2.0, with debug_info, not stripped

I plan to add an option to link with -Wl,-z,now.

Bootstrapped on x86_64-pc-linux-gnu with --with-included-gettext
--enable-host-pie as well as without --enable-host-pie.  Also tested
on a Debian system where the system gcc was configured with
--enable-default-pie.

Co-Authored by: Iain Sandoe  <iain@sandoe.co.uk>

ChangeLog:

	* configure.ac (--enable-host-pie): New check.  Set PICFLAG after this
	check.
	* configure: Regenerate.

c++tools/ChangeLog:

	* Makefile.in: Rename PIEFLAG to PICFLAG.  Set LD_PICFLAG.  Use it.
	Use pic/libiberty.a if PICFLAG is set.
	* configure.ac (--enable-default-pie): Set PICFLAG instead of PIEFLAG.
	(--enable-host-pie): New check.
	* configure: Regenerate.

fixincludes/ChangeLog:

	* Makefile.in: Set and use PICFLAG and LD_PICFLAG.  Use the "pic"
	build of libiberty if PICFLAG is set.
	* configure.ac:
	* configure: Regenerate.

gcc/ChangeLog:

	* Makefile.in: Set LD_PICFLAG.  Use it.  Set enable_host_pie.
	Remove NO_PIE_CFLAGS and NO_PIE_FLAG.  Pass LD_PICFLAG to
	ALL_LINKERFLAGS.  Use the "pic" build of libiberty if --enable-host-pie.
	* configure.ac (--enable-host-shared): Don't set PICFLAG here.
	(--enable-host-pie): New check.  Set PICFLAG and LD_PICFLAG after this
	check.
	* configure: Regenerate.
	* doc/install.texi: Document --enable-host-pie.

gcc/ada/ChangeLog:

	* gcc-interface/Make-lang.in (ALL_ADAFLAGS): Remove NO_PIE_CFLAGS.  Add
	PICFLAG.  Use PICFLAG when building ada/b_gnat1.o and ada/b_gnatb.o.
	* gcc-interface/Makefile.in: Use pic/libiberty.a if PICFLAG is set.
	Remove NO_PIE_FLAG.

gcc/m2/ChangeLog:

	* Make-lang.in: New var, GM2_PICFLAGS.  Use it.

gcc/d/ChangeLog:

	* Make-lang.in: Remove NO_PIE_CFLAGS.

intl/ChangeLog:

	* Makefile.in: Use @PICFLAG@ in COMPILE as well.
	* configure.ac (--enable-host-shared): Don't set PICFLAG here.
	(--enable-host-pie): New check.  Set PICFLAG after this check.
	* configure: Regenerate.

libcody/ChangeLog:

	* Makefile.in: Pass LD_PICFLAG to LDFLAGS.
	* configure.ac (--enable-host-shared): Don't set PICFLAG here.
	(--enable-host-pie): New check.  Set PICFLAG and LD_PICFLAG after this
	check.
	* configure: Regenerate.

libcpp/ChangeLog:

	* configure.ac (--enable-host-shared): Don't set PICFLAG here.
	(--enable-host-pie): New check.  Set PICFLAG after this check.
	* configure: Regenerate.

libdecnumber/ChangeLog:

	* configure.ac (--enable-host-shared): Don't set PICFLAG here.
	(--enable-host-pie): New check.  Set PICFLAG after this check.
	* configure: Regenerate.

libiberty/ChangeLog:

	* configure.ac: Also set shared when enable_host_pie.
	* configure: Regenerate.

zlib/ChangeLog:

	* configure.ac (--enable-host-shared): Don't set PICFLAG here.
	(--enable-host-pie): New check.  Set PICFLAG after this check.
	* configure: Regenerate.

1 files changed, 14 insertions, 2 deletions

diff --git a/gcc/doc/install.texi b/gcc/doc/install.texi
index 7bcf978..a38d293 100644
--- a/gcc/doc/install.texi
+++ b/gcc/doc/install.texi
@@ -1075,14 +1075,26 @@ code.
 
 @item --enable-host-shared
 Specify that the @emph{host} code should be built into position-independent
-machine code (with -fPIC), allowing it to be used within shared libraries,
-but yielding a slightly slower compiler.
+machine code (with @option{-fPIC}), allowing it to be used within shared
+libraries, but yielding a slightly slower compiler.
 
 This option is required when building the libgccjit.so library.
 
 Contrast with @option{--enable-shared}, which affects @emph{target}
 libraries.
 
+@item --enable-host-pie
+Specify that the @emph{host} executables should be built into
+position-independent executables (with @option{-fPIE} and @option{-pie}),
+yielding a slightly slower compiler (but faster than
+@option{--enable-host-shared}).  Position-independent executables are loaded
+at random addresses each time they are executed, therefore provide additional
+protection against Return Oriented Programming (ROP) attacks.
+
+@option{--enable-host-pie}) may be used with @option{--enable-host-shared}),
+in which case @option{-fPIC} is used when compiling, and @option{-pie} when
+linking.
+
 @item @anchor{with-gnu-as}--with-gnu-as
 Specify that the compiler should assume that the
 assembler it finds is the GNU assembler.  However, this does not modify