MAINTAINERS (crx port, [...]): Remove.

	* MAINTAINERS (crx port, m68hc11 port): Remove.  Move maintainers
	to Write After Approval.
	* config-ml.in: Don't handle arc-*-elf*.
	* configure.ac (arc-*-*, crx-*-*, i[[3456789]]86-*-pe,
	m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*, mcore-*-pe*): Don't
	handle GCC libraries.
	* configure: Regenerate.

contrib:
	* compare-all-tests (all_targets): Remove crx and m68hc11.

fixincludes:
	* mkfixinc.sh: Don't handle i?86-moss-msdos* or i?86-*-pe.

gcc:
	* config/alpha/gnu.h: Remove.
	* config/arc: Remove directory.
	* config/arm/netbsd.h: Remove.
	* config/arm/t-pe: Remove.
	* config/crx: Remove directory.
	* config/i386/netbsd.h: Remove.
	* config/m68hc11: Remove directory.
	* config/m68k/uclinux-oldabi.h: Remove.
	* config/mcore/mcore-pe.h: Remove.
	* config/mcore/t-mcore-pe: Remove.
	* config/netbsd-aout.h: Remove.
	* config/rs6000/gnu.h: Remove.
	* config/sh/sh-symbian.h: Remove.
	* config/sh/symbian-base.c: Remove.
	* config/sh/symbian-c.c: Remove.
	* config/sh/symbian-cxx.c: Remove.
	* config/sh/symbian-post.h: Remove.
	* config/sh/symbian-pre.h: Remove.
	* config/sh/t-symbian: Remove.
	* config/svr3.h: Remove.
	* config/vax/netbsd.h: Remove.
	* config.build: Don't handle i[34567]86-*-pe.
	* config.gcc: Remove handling of deprecations for most deprecated
	targets.
	(m68k-*-uclinuxoldabi*): Add to second deprecated list.
	(alpha*-*-gnu*, arc-*-elf*, arm*-*-netbsd*, arm-*-pe*, crx-*-elf,
	i[34567]86-*-netbsd*, i[34567]86-*-pe, m68hc11-*-*|m6811-*-*,
	m68hc12-*-*|m6812-*-*, m68k-*-uclinuxoldabi*, mcore-*-pe*,
	powerpc64-*-gnu*, powerpc-*-gnu-gnualtivec*, powerpc-*-gnu*,
	sh-*-symbianelf* | sh[12346l]*-*-symbianelf*, vax-*-netbsd*):
	Remove cases.
	* config.host: Don't handle i[34567]86-*-pe.
	* config/rs6000/linux64.h (LINK_OS_GNU_SPEC): Remove.
	(ASM_SPEC32): Don't handle -mcall-gnu.
	* config/rs6000/sysv4.h (SUBTARGET_OVERRIDE_OPTIONS): Don't handle
	-mcall-gnu.
	(ASM_SPEC, CC1_SPEC, LINK_START_SPEC, LINK_OS_SPEC, CPP_SPEC,
	STARTFILE_SPEC, LIB_SPEC, ENDFILE_SPEC): Don't handle -mcall-gnu.
	(LIB_GNU_SPEC, STARTFILE_GNU_SPEC, ENDFILE_GNU_SPEC,
	LINK_START_GNU_SPEC, LINK_OS_GNU_SPEC, CPP_OS_GNU_SPEC): Remove.
	(SUBTARGET_EXTRA_SPECS): Remove *_gnu specs.
	* config/sh/sh-protos.h, config/sh/sh.c: Remove all code
	conditional on SYMBIAN.
	* configure.ac: Don't handle powerpc*-*-gnu*.
	* configure: Regenerate.
	* doc/extend.texi (interrupt attribute): Don't mention CRX.
	* doc/install-old.texi (m6811, m6812): Don't mention.
	* doc/install.texi (arc-*-elf*): Don't document multilib option.
	(arc-*-elf, CRX, m6811-elf, m6812-elf): Remove.
	(m68k-uclinuxoldabi): Don't mention.
	* doc/invoke.texi (ARC Options, CRX Options, M68hc1x Options):
	Remove.
	(-mcall-gnu): Remove.
	* doc/md.texi (CRX Architecture, Motorola 68HC11 & 68HC12
	families): Remove constraint documentation.

gcc/testsuite:
	* gcc.c-torture/execute/920501-8.x: Remove.
	* gcc.c-torture/execute/930513-1.x: Remove.
	* gcc.c-torture/execute/960312-1.x: Remove.
	* gcc.c-torture/compile/20000804-1.c,
	gcc.c-torture/compile/20001205-1.c,
	gcc.c-torture/compile/20001226-1.c,
	gcc.c-torture/compile/20010518-2.c,
	gcc.c-torture/compile/20020312-1.c,
	gcc.c-torture/compile/20020604-1.c,
	gcc.c-torture/compile/920501-12.c,
	gcc.c-torture/compile/920501-4.c,
	gcc.c-torture/compile/920520-1.c,
	gcc.c-torture/compile/980506-1.c,
	gcc.c-torture/execute/980709-1.x,
	gcc.c-torture/execute/990826-0.x: Don't XFAIL or use special
	options for m68hc11.
	* gcc.dg/cpp/assert4.c: Don't handle ARC.
	* gcc.dg/sibcall-3.c, gcc.dg/sibcall-4.c: Don't XFAIL for arc or
	m68hc11.

libgcc:
	* config.host (alpha*-*-gnu*, arc-*-elf*, arm*-*-netbsd*,
	arm-*-pe*, crx-*-elf, i[34567]86-*-netbsd*, i[34567]86-*-pe,
	m68hc11-*-*|m6811-*-*, m68hc12-*-*|m6812-*-*, mcore-*-pe*,
	powerpc64-*-gnu*, powerpc-*-gnu-gnualtivec*, powerpc-*-gnu*,
	sh-*-symbianelf* | sh[12346l]*-*-symbianelf*, vax-*-netbsd*):
	Remove cases.

libstdc++-v3:
	* configure.ac: Don't handle powerpc*-*-gnu*.
	* configure: Regenerate.

From-SVN: r171302

1 files changed, 1 insertions, 145 deletions

diff --git a/gcc/doc/invoke.texi b/gcc/doc/invoke.texi
index c939dfd..6390b81 100644
--- a/gcc/doc/invoke.texi
+++ b/gcc/doc/invoke.texi
@@ -445,11 +445,6 @@ Objective-C and Objective-C++ Dialects}.
 @c Try and put the significant identifier (CPU or system) first,
 @c so users have a clue at guessing where the ones they want will be.
 
-@emph{ARC Options}
-@gccoptlist{-EB  -EL @gol
--mmangle-cpu  -mcpu=@var{cpu}  -mtext=@var{text-section} @gol
--mdata=@var{data-section}  -mrodata=@var{readonly-data-section}}
-
 @emph{ARM Options}
 @gccoptlist{-mapcs-frame  -mno-apcs-frame @gol
 -mabi=@var{name} @gol
@@ -501,9 +496,6 @@ Objective-C and Objective-C++ Dialects}.
 -melf  -maout  -melinux  -mlinux  -sim  -sim2 @gol
 -mmul-bug-workaround  -mno-mul-bug-workaround}
 
-@emph{CRX Options}
-@gccoptlist{-mmac -mpush-args}
-
 @emph{Darwin Options}
 @gccoptlist{-all_load  -allowable_client  -arch  -arch_errors_fatal @gol
 -arch_only  -bind_at_load  -bundle  -bundle_loader @gol
@@ -668,11 +660,6 @@ Objective-C and Objective-C++ Dialects}.
 -mshared-library-id=n  -mid-shared-library  -mno-id-shared-library @gol
 -mxgot -mno-xgot}
 
-@emph{M68hc1x Options}
-@gccoptlist{-m6811  -m6812  -m68hc11  -m68hc12   -m68hcs12 @gol
--mauto-incdec  -minmax  -mlong-calls  -mshort @gol
--msoft-reg-count=@var{count}}
-
 @emph{MCore Options}
 @gccoptlist{-mhardlit  -mno-hardlit  -mdiv  -mno-div  -mrelax-immediates @gol
 -mno-relax-immediates  -mwide-bitfields  -mno-wide-bitfields @gol
@@ -9962,12 +9949,10 @@ platform.
 @c in Machine Dependent Options
 
 @menu
-* ARC Options::
 * ARM Options::
 * AVR Options::
 * Blackfin Options::
 * CRIS Options::
-* CRX Options::
 * Darwin Options::
 * DEC Alpha Options::
 * DEC Alpha/VMS Options::
@@ -9984,7 +9969,6 @@ platform.
 * M32C Options::
 * M32R/D Options::
 * M680x0 Options::
-* M68hc1x Options::
 * MCore Options::
 * MeP Options::
 * MicroBlaze Options::
@@ -10012,49 +9996,6 @@ platform.
 * zSeries Options::
 @end menu
 
-@node ARC Options
-@subsection ARC Options
-@cindex ARC Options
-
-These options are defined for ARC implementations:
-
-@table @gcctabopt
-@item -EL
-@opindex EL
-Compile code for little endian mode.  This is the default.
-
-@item -EB
-@opindex EB
-Compile code for big endian mode.
-
-@item -mmangle-cpu
-@opindex mmangle-cpu
-Prepend the name of the CPU to all public symbol names.
-In multiple-processor systems, there are many ARC variants with different
-instruction and register set characteristics.  This flag prevents code
-compiled for one CPU to be linked with code compiled for another.
-No facility exists for handling variants that are ``almost identical''.
-This is an all or nothing option.
-
-@item -mcpu=@var{cpu}
-@opindex mcpu
-Compile code for ARC variant @var{cpu}.
-Which variants are supported depend on the configuration.
-All variants support @option{-mcpu=base}, this is the default.
-
-@item -mtext=@var{text-section}
-@itemx -mdata=@var{data-section}
-@itemx -mrodata=@var{readonly-data-section}
-@opindex mtext
-@opindex mdata
-@opindex mrodata
-Put functions, data, and readonly data in @var{text-section},
-@var{data-section}, and @var{readonly-data-section} respectively
-by default.  This can be overridden with the @code{section} attribute.
-@xref{Variable Attributes}.
-
-@end table
-
 @node ARM Options
 @subsection ARM Options
 @cindex ARM options
@@ -10795,24 +10736,6 @@ Like @option{-sim}, but pass linker options to locate initialized data at
 0x40000000 and zero-initialized data at 0x80000000.
 @end table
 
-@node CRX Options
-@subsection CRX Options
-@cindex CRX Options
-
-These options are defined specifically for the CRX ports.
-
-@table @gcctabopt
-
-@item -mmac
-@opindex mmac
-Enable the use of multiply-accumulate instructions. Disabled by default.
-
-@item -mpush-args
-@opindex mpush-args
-Push instructions will be used to pass outgoing arguments when functions
-are called. Enabled by default.
-@end table
-
 @node Darwin Options
 @subsection Darwin Options
 @cindex Darwin options
@@ -13685,68 +13608,6 @@ position-independent code.
 
 @end table
 
-@node M68hc1x Options
-@subsection M68hc1x Options
-@cindex M68hc1x options
-
-These are the @samp{-m} options defined for the 68hc11 and 68hc12
-microcontrollers.  The default values for these options depends on
-which style of microcontroller was selected when the compiler was configured;
-the defaults for the most common choices are given below.
-
-@table @gcctabopt
-@item -m6811
-@itemx -m68hc11
-@opindex m6811
-@opindex m68hc11
-Generate output for a 68HC11.  This is the default
-when the compiler is configured for 68HC11-based systems.
-
-@item -m6812
-@itemx -m68hc12
-@opindex m6812
-@opindex m68hc12
-Generate output for a 68HC12.  This is the default
-when the compiler is configured for 68HC12-based systems.
-
-@item -m68S12
-@itemx -m68hcs12
-@opindex m68S12
-@opindex m68hcs12
-Generate output for a 68HCS12.
-
-@item -mauto-incdec
-@opindex mauto-incdec
-Enable the use of 68HC12 pre and post auto-increment and auto-decrement
-addressing modes.
-
-@item -minmax
-@itemx -mnominmax
-@opindex minmax
-@opindex mnominmax
-Enable the use of 68HC12 min and max instructions.
-
-@item -mlong-calls
-@itemx -mno-long-calls
-@opindex mlong-calls
-@opindex mno-long-calls
-Treat all calls as being far away (near).  If calls are assumed to be
-far away, the compiler will use the @code{call} instruction to
-call a function and the @code{rtc} instruction for returning.
-
-@item -mshort
-@opindex mshort
-Consider type @code{int} to be 16 bits wide, like @code{short int}.
-
-@item -msoft-reg-count=@var{count}
-@opindex msoft-reg-count
-Specify the number of pseudo-soft registers which are used for the
-code generation.  The maximum number is 32.  Using more pseudo-soft
-register may or may not result in better code depending on the program.
-The default is 4 for 68HC11 and 2 for 68HC12.
-
-@end table
-
 @node MCore Options
 @subsection MCore Options
 @cindex MCore options
@@ -15910,11 +15771,6 @@ operating system.
 On System V.4 and embedded PowerPC systems compile code for the
 Linux-based GNU system.
 
-@item -mcall-gnu
-@opindex mcall-gnu
-On System V.4 and embedded PowerPC systems compile code for the
-Hurd-based GNU system.
-
 @item -mcall-freebsd
 @opindex mcall-freebsd
 On System V.4 and embedded PowerPC systems compile code for the
@@ -16748,7 +16604,7 @@ Comply with the calling conventions defined by Renesas.
 @opindex mhitachi
 Comply with the calling conventions defined for GCC before the Renesas
 conventions were available.  This option is the default for all
-targets of the SH toolchain except for @samp{sh-symbianelf}.
+targets of the SH toolchain.
 
 @item -mnomacsave
 @opindex mnomacsave