texinfo.tex: Update to version 2003-12-21.10.

	* doc/include/texinfo.tex: Update to version 2003-12-21.10.
	* doc/gcc.texi, doc/gccint.texi: Don't set font for
	@def... commands.
	* doc/invoke.texi: Don't use empty @opindex.

From-SVN: r75274

1 files changed, 2303 insertions, 2351 deletions

diff --git a/gcc/doc/include/texinfo.tex b/gcc/doc/include/texinfo.tex
index e9293f3..9500f18 100644
--- a/gcc/doc/include/texinfo.tex
+++ b/gcc/doc/include/texinfo.tex
@@ -3,7 +3,7 @@
 % Load plain if necessary, i.e., if running under initex.
 \expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
 %
-\def\texinfoversion{2003-05-04.08}
+\def\texinfoversion{2003-12-21.10}
 %
 % Copyright (C) 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995,
 % 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
@@ -23,21 +23,16 @@
 % to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
 % Boston, MA 02111-1307, USA.
 %
-% In other words, you are welcome to use, share and improve this program.
-% You are forbidden to forbid anyone else to use, share and improve
-% what you give them.   Help stamp out software-hoarding!
-%
+% As a special exception, when this file is read by TeX when processing
+% a Texinfo source document, you may use the result without
+% restriction.  (This has been our intent since Texinfo was invented.)
+% 
 % Please try the latest version of texinfo.tex before submitting bug
 % reports; you can get the latest version from:
-%   ftp://ftp.gnu.org/gnu/texinfo/texinfo.tex
-%     (and all GNU mirrors, see http://www.gnu.org/order/ftp.html)
+%   http://www.gnu.org/software/texinfo/ (the Texinfo home page), or
 %   ftp://tug.org/tex/texinfo.tex
-%     (and all CTAN mirrors, see http://www.ctan.org),
-%   and /home/gd/gnu/doc/texinfo.tex on the GNU machines.
-%
-% The GNU Texinfo home page is http://www.gnu.org/software/texinfo.
-%
-% The texinfo.tex in any given Texinfo distribution could well be out
+%     (and all CTAN mirrors, see http://www.ctan.org).
+% The texinfo.tex in any given distribution could well be out
 % of date, so if that's what you're using, please check.
 %
 % Send bug reports to bug-texinfo@gnu.org.  Please include including a
@@ -59,6 +54,9 @@
 % It is possible to adapt texinfo.tex for other languages, to some
 % extent.  You can get the existing language-specific files from the
 % full Texinfo distribution.
+% 
+% The GNU Texinfo home page is http://www.gnu.org/software/texinfo.
+
 
 \message{Loading texinfo [version \texinfoversion]:}
 
@@ -85,10 +83,13 @@
 \let\ptexend=\end
 \let\ptexequiv=\equiv
 \let\ptexexclam=\!
+\let\ptexfootnote=\footnote
 \let\ptexgtr=>
 \let\ptexhat=^
 \let\ptexi=\i
 \let\ptexindent=\indent
+\let\ptexnoindent=\noindent
+\let\ptexinsert=\insert
 \let\ptexlbrace=\{
 \let\ptexless=<
 \let\ptexplus=+
@@ -101,6 +102,15 @@
 % starts a new line in the output.
 \newlinechar = `^^J
 
+% Use TeX 3.0's \inputlineno to get the line number, for better error
+% messages, but if we're using an old version of TeX, don't do anything.
+%
+\ifx\inputlineno\thisisundefined
+  \let\linenumber = \empty % Pre-3.0.
+\else
+  \def\linenumber{l.\the\inputlineno:\space}
+\fi
+
 % Set up fixed words for English if not already set.
 \ifx\putwordAppendix\undefined  \gdef\putwordAppendix{Appendix}\fi
 \ifx\putwordChapter\undefined   \gdef\putwordChapter{Chapter}\fi
@@ -139,30 +149,28 @@
 \ifx\putwordDefspec\undefined   \gdef\putwordDefspec{Special Form}\fi
 \ifx\putwordDefvar\undefined    \gdef\putwordDefvar{Variable}\fi
 \ifx\putwordDefopt\undefined    \gdef\putwordDefopt{User Option}\fi
-\ifx\putwordDeftypevar\undefined\gdef\putwordDeftypevar{Variable}\fi
 \ifx\putwordDeffunc\undefined   \gdef\putwordDeffunc{Function}\fi
-\ifx\putwordDeftypefun\undefined\gdef\putwordDeftypefun{Function}\fi
 
 % In some macros, we cannot use the `\? notation---the left quote is
 % in some cases the escape char.
 \chardef\colonChar = `\:
 \chardef\commaChar = `\,
 \chardef\dotChar   = `\.
-\chardef\equalChar = `\=
 \chardef\exclamChar= `\!
 \chardef\questChar = `\?
 \chardef\semiChar  = `\;
-\chardef\spaceChar = `\ %
 \chardef\underChar = `\_
 
+\chardef\spaceChar = `\ %
+\chardef\spacecat = 10
+\def\spaceisspace{\catcode\spaceChar=\spacecat}
+
 % Ignore a token.
 %
 \def\gobble#1{}
 
-% True if #1 is the empty string, i.e., called like `\ifempty{}'.
-%
-\def\ifempty#1{\ifemptyx #1\emptymarkA\emptymarkB}%
-\def\ifemptyx#1#2\emptymarkB{\ifx #1\emptymarkA}%
+% The following is used inside several \edef's.
+\def\makecsname#1{\expandafter\noexpand\csname#1\endcsname}
 
 % Hyphenation fixes.
 \hyphenation{ap-pen-dix}
@@ -176,6 +184,41 @@
 \newdimen\normaloffset
 \newdimen\pagewidth \newdimen\pageheight
 
+% For a final copy, take out the rectangles
+% that mark overfull boxes (in case you have decided
+% that the text looks ok even though it passes the margin).
+%
+\def\finalout{\overfullrule=0pt}
+
+% @| inserts a changebar to the left of the current line.  It should
+% surround any changed text.  This approach does *not* work if the
+% change spans more than two lines of output.  To handle that, we would
+% have adopt a much more difficult approach (putting marks into the main
+% vertical list for the beginning and end of each change).
+%
+\def\|{%
+  % \vadjust can only be used in horizontal mode.
+  \leavevmode
+  %
+  % Append this vertical mode material after the current line in the output.
+  \vadjust{%
+    % We want to insert a rule with the height and depth of the current
+    % leading; that is exactly what \strutbox is supposed to record.
+    \vskip-\baselineskip
+    %
+    % \vadjust-items are inserted at the left edge of the type.  So
+    % the \llap here moves out into the left-hand margin.
+    \llap{%
+      %
+      % For a thicker or thinner bar, change the `1pt'.
+      \vrule height\baselineskip width1pt
+      %
+      % This is the space between the bar and the text.
+      \hskip 12pt
+    }%
+  }%
+}
+
 % Sometimes it is convenient to have everything in the transcript file
 % and nothing on the terminal.  We don't just call \tracingall here,
 % since that produces some useless output on the terminal.  We also make
@@ -200,7 +243,7 @@
     \tracingassigns1
   \fi
   \tracingcommands3  % 3 gives us more in etex
-  \errorcontextlines\maxdimen
+  \errorcontextlines16
 }%
 
 % add check for \lastpenalty to plain's definitions.  If the last thing
@@ -258,7 +301,7 @@
                    % the page break happens to be in the middle of an example.
     \shipout\vbox{%
       % Do this early so pdf references go to the beginning of the page.
-      \ifpdfmakepagedest \pdfmkdest{\the\pageno} \fi
+      \ifpdfmakepagedest \pdfdest name{\the\pageno} xyz\fi
       %
       \ifcropmarks \vbox to \outervsize\bgroup
         \hsize = \outerhsize
@@ -339,132 +382,162 @@
 % the input line (except we remove a trailing comment).  #1 should be a
 % macro which expects an ordinary undelimited TeX argument.
 %
-\def\parsearg#1{%
-  \let\next = #1%
+\def\parsearg{\parseargusing{}}
+\def\parseargusing#1#2{%
+  \def\next{#2}%
   \begingroup
     \obeylines
-    \futurelet\temp\parseargx
-}
-
-% If the next token is an obeyed space (from an @example environment or
-% the like), remove it and recurse.  Otherwise, we're done.
-\def\parseargx{%
-  % \obeyedspace is defined far below, after the definition of \sepspaces.
-  \ifx\obeyedspace\temp
-    \expandafter\parseargdiscardspace
-  \else
-    \expandafter\parseargline
-  \fi
+    \spaceisspace
+    #1%
+    \parseargline\empty% Insert the \empty token, see \finishparsearg below.
 }
 
-% Remove a single space (as the delimiter token to the macro call).
-{\obeyspaces %
- \gdef\parseargdiscardspace {\futurelet\temp\parseargx}}
-
 {\obeylines %
   \gdef\parseargline#1^^M{%
     \endgroup % End of the group started in \parsearg.
-    %
-    % First remove any @c comment, then any @comment.
-    % Result of each macro is put in \toks0.
-    \argremovec #1\c\relax %
-    \expandafter\argremovecomment \the\toks0 \comment\relax %
-    %
-    % Call the caller's macro, saved as \next in \parsearg.
-    \expandafter\next\expandafter{\the\toks0}%
+    \argremovecomment #1\comment\ArgTerm%
   }%
 }
 
-% Since all \c{,omment} does is throw away the argument, we can let TeX
-% do that for us.  The \relax here is matched by the \relax in the call
-% in \parseargline; it could be more or less anything, its purpose is
-% just to delimit the argument to the \c.
-\def\argremovec#1\c#2\relax{\toks0 = {#1}}
-\def\argremovecomment#1\comment#2\relax{\toks0 = {#1}}
+% First remove any @comment, then any @c comment.
+\def\argremovecomment#1\comment#2\ArgTerm{\argremovec #1\c\ArgTerm}
+\def\argremovec#1\c#2\ArgTerm{\argcheckspaces#1\^^M\ArgTerm}
 
-% \argremovec{,omment} might leave us with trailing spaces, though; e.g.,
+% Each occurence of `\^^M' or `<space>\^^M' is replaced by a single space.
+%
+% \argremovec might leave us with trailing space, e.g.,
 %    @end itemize  @c foo
-% will have two active spaces as part of the argument with the
-% `itemize'.  Here we remove all active spaces from #1, and assign the
-% result to \toks0.
-%
-% This loses if there are any *other* active characters besides spaces
-% in the argument -- _ ^ +, for example -- since they get expanded.
-% Fortunately, Texinfo does not define any such commands.  (If it ever
-% does, the catcode of the characters in questionwill have to be changed
-% here.)  But this means we cannot call \removeactivespaces as part of
-% \argremovec{,omment}, since @c uses \parsearg, and thus the argument
-% that \parsearg gets might well have any character at all in it.
-%
-\def\removeactivespaces#1{%
-  \begingroup
-    \ignoreactivespaces
-    \edef\temp{#1}%
-    \global\toks0 = \expandafter{\temp}%
-  \endgroup
+% This space token undergoes the same procedure and is eventually removed
+% by \finishparsearg.
+%
+\def\argcheckspaces#1\^^M{\argcheckspacesX#1\^^M \^^M}
+\def\argcheckspacesX#1 \^^M{\argcheckspacesY#1\^^M}
+\def\argcheckspacesY#1\^^M#2\^^M#3\ArgTerm{%
+  \def\temp{#3}%
+  \ifx\temp\empty
+    % We cannot use \next here, as it holds the macro to run;
+    % thus we reuse \temp.
+    \let\temp\finishparsearg
+  \else
+    \let\temp\argcheckspaces
+  \fi
+  % Put the space token in:
+  \temp#1 #3\ArgTerm
 }
 
-% Change the active space to expand to nothing.
+% If a _delimited_ argument is enclosed in braces, they get stripped; so
+% to get _exactly_ the rest of the line, we had to prevent such situation.
+% We prepended an \empty token at the very beginning and we expand it now,
+% just before passing the control to \next.
+% (Similarily, we have to think about #3 of \argcheckspacesY above: it is
+% either the null string, or it ends with \^^M---thus there is no danger
+% that a pair of braces would be stripped.
 %
-\begingroup
-  \obeyspaces
-  \gdef\ignoreactivespaces{\obeyspaces\let =\empty}
-\endgroup
+% But first, we have to remove the trailing space token.
+%
+\def\finishparsearg#1 \ArgTerm{\expandafter\next\expandafter{#1}}
 
+% \parseargdef\foo{...}
+%	is roughly equivalent to
+% \def\foo{\parsearg\Xfoo}
+% \def\Xfoo#1{...}
+%
+% Actually, I use \csname\string\foo\endcsname, ie. \\foo, as it is my
+% favourite TeX trick.  --kasal, 16nov03
 
-\def\flushcr{\ifx\par\lisppar \def\next##1{}\else \let\next=\relax \fi \next}
+\def\parseargdef#1{%
+  \expandafter \doparseargdef \csname\string#1\endcsname #1%
+}
+\def\doparseargdef#1#2{%
+  \def#2{\parsearg#1}%
+  \def#1##1%
+}
 
-%% These are used to keep @begin/@end levels from running away
-%% Call \inENV within environments (after a \begingroup)
-\newif\ifENV \ENVfalse \def\inENV{\ifENV\relax\else\ENVtrue\fi}
-\def\ENVcheck{%
-\ifENV\errmessage{Still within an environment; press RETURN to continue}
-\endgroup\fi} % This is not perfect, but it should reduce lossage
+% Several utility definitions with active space:
+{
+  \obeyspaces
+  \gdef\obeyedspace{ }
 
-% @begin foo  is the same as @foo, for now.
-\newhelp\EMsimple{Press RETURN to continue.}
+  % Make each space character in the input produce a normal interword
+  % space in the output.  Don't allow a line break at this space, as this
+  % is used only in environments like @example, where each line of input
+  % should produce a line of output anyway.
+  %
+  \gdef\sepspaces{\obeyspaces\let =\tie}
 
-\outer\def\begin{\parsearg\beginxxx}
+  % If an index command is used in an @example environment, any spaces
+  % therein should become regular spaces in the raw index file, not the
+  % expansion of \tie (\leavevmode \penalty \@M \ ).
+  \gdef\unsepspaces{\let =\space}
+}
 
-\def\beginxxx #1{%
-\expandafter\ifx\csname #1\endcsname\relax
-{\errhelp=\EMsimple \errmessage{Undefined command @begin #1}}\else
-\csname #1\endcsname\fi}
 
-% @end foo executes the definition of \Efoo.
-%
-\def\end{\parsearg\endxxx}
-\def\endxxx #1{%
-  \removeactivespaces{#1}%
-  \edef\endthing{\the\toks0}%
-  %
-  \expandafter\ifx\csname E\endthing\endcsname\relax
-    \expandafter\ifx\csname \endthing\endcsname\relax
-      % There's no \foo, i.e., no ``environment'' foo.
-      \errhelp = \EMsimple
-      \errmessage{Undefined command `@end \endthing'}%
-    \else
-      \unmatchedenderror\endthing
-    \fi
+\def\flushcr{\ifx\par\lisppar \def\next##1{}\else \let\next=\relax \fi \next}
+
+% Define the framework for environments in texinfo.tex.  It's used like this:
+% 
+%   \envdef\foo{...}
+%   \def\Efoo{...}
+%   
+% It's the responsibility of \envdef to insert \begingroup before the
+% actual body; @end closes the group after calling \Efoo.  \envdef also
+% defines \thisenv, so the current environment is known; @end checks
+% whether the environment name matches.  The \checkenv macro can also be
+% used to check whether the current environment is the one expected.
+% 
+% Non-false conditionals (@iftex, @ifset) don't fit into this, so they
+% are not treated as enviroments; they don't open a group.  (The
+% implementation of @end takes care not to call \endgroup in this
+% special case.)
+
+
+% At runtime, environments start with this:
+\def\startenvironment#1{\begingroup\def\thisenv{#1}}
+% initialize
+\let\thisenv\empty
+
+% ... but they get defined via ``\envdef\foo{...}'':
+\long\def\envdef#1#2{\def#1{\startenvironment#1#2}}
+\def\envparseargdef#1#2{\parseargdef#1{\startenvironment#1#2}}
+
+% Check whether we're in the right environment:
+\def\checkenv#1{%
+  \def\temp{#1}%
+  \ifx\thisenv\temp
   \else
-    % Everything's ok; the right environment has been started.
-    \csname E\endthing\endcsname
+    \badenverr
   \fi
 }
 
-% There is an environment #1, but it hasn't been started.  Give an error.
-%
-\def\unmatchedenderror#1{%
+% Evironment mismatch, #1 expected:
+\def\badenverr{%
   \errhelp = \EMsimple
-  \errmessage{This `@end #1' doesn't have a matching `@#1'}%
+  \errmessage{This command can appear only \inenvironment\temp,
+    not \inenvironment\thisenv}%
+}
+\def\inenvironment#1{%
+  \ifx#1\empty
+    out of any environment%
+  \else
+    in environment \expandafter\string#1%
+  \fi
 }
 
-% Define the control sequence \E#1 to give an unmatched @end error.
+% @end foo executes the definition of \Efoo.
+% But first, it executes a specialized version of \checkenv
 %
-\def\defineunmatchedend#1{%
-  \expandafter\def\csname E#1\endcsname{\unmatchedenderror{#1}}%
+\parseargdef\end{%
+  \if 1\csname iscond.#1\endcsname
+  \else
+    % The general wording of \badenverr may not be ideal, but... --kasal, 06nov03
+    \expandafter\checkenv\csname#1\endcsname
+    \csname E#1\endcsname
+    \endgroup
+  \fi
 }
 
+\newhelp\EMsimple{Press RETURN to continue.}
+
 
 %% Simple single-character @ commands
 
@@ -496,6 +569,9 @@
   !gdef!rbraceatcmd[@}]%
 !endgroup
 
+% @comma{} to avoid , parsing problems.
+\let\comma = ,
+
 % Accents: @, @dotaccent @ringaccent @ubaraccent @udotaccent
 % Others are defined by plain TeX: @` @' @" @^ @~ @= @u @v @H.
 \let\, = \c
@@ -505,10 +581,12 @@
 \let\ubaraccent = \b
 \let\udotaccent = \d
 
-% Other special characters: @questiondown @exclamdown
+% Other special characters: @questiondown @exclamdown @ordf @ordm
 % Plain TeX defines: @AA @AE @O @OE @L (plus lowercase versions) @ss.
 \def\questiondown{?`}
 \def\exclamdown{!`}
+\def\ordf{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{a}}}
+\def\ordm{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{o}}}
 
 % Dotless i and dotless j, used for accents.
 \def\imacro{i}
@@ -521,6 +599,20 @@
   \fi\fi
 }
 
+% @LaTeX{} logo.  (@TeX{} is defined in plain.tex.)
+% Not quite the same results as the definition in latex.ltx, since we
+% use a different font for the raised A; it's most convenient for us to
+% go two sizes down, rather than using the \scriptstyle font (since we
+% don't reset \scriptstyle and \scriptscriptstyle).
+% 
+\def\LaTeX{%
+  L\kern-.36em
+  {\setbox0=\hbox{T}%
+   \vbox to \ht0{\hbox{\selectfonts\lllsize A}\vss}}%
+  \kern-.15em
+  \TeX
+}
+
 % Be sure we're in horizontal mode when doing a tie, since we make space
 % equivalent to this in @example-like environments. Otherwise, a space
 % at the beginning of a line will start with \penalty -- and
@@ -574,59 +666,14 @@
 \newbox\groupbox
 \def\vfilllimit{0.7}
 %
-\def\group{\begingroup
-  \ifnum\catcode13=\active \else
+\envdef\group{%
+  \ifnum\catcode`\^^M=\active \else
     \errhelp = \groupinvalidhelp
     \errmessage{@group invalid in context where filling is enabled}%
   \fi
-  %
-  % The \vtop we start below produces a box with normal height and large
-  % depth; thus, TeX puts \baselineskip glue before it, and (when the
-  % next line of text is done) \lineskip glue after it.  (See p.82 of
-  % the TeXbook.)  Thus, space below is not quite equal to space
-  % above.  But it's pretty close.
-  \def\Egroup{%
-    \egroup           % End the \vtop.
-    % \dimen0 is the vertical size of the group's box.
-    \dimen0 = \ht\groupbox  \advance\dimen0 by \dp\groupbox
-    % \dimen2 is how much space is left on the page (more or less).
-    \dimen2 = \pageheight   \advance\dimen2 by -\pagetotal
-    % if the group doesn't fit on the current page, and it's a big big
-    % group, force a page break.
-    \ifdim \dimen0 > \dimen2
-      \ifdim \pagetotal < \vfilllimit\pageheight
-        \page
-      \fi
-    \fi
-    \copy\groupbox
-    \endgroup         % End the \group.
-  }%
+  \startsavinginserts
   %
   \setbox\groupbox = \vtop\bgroup
-    % We have to put a strut on the last line in case the @group is in
-    % the midst of an example, rather than completely enclosing it.
-    % Otherwise, the interline space between the last line of the group
-    % and the first line afterwards is too small.  But we can't put the
-    % strut in \Egroup, since there it would be on a line by itself.
-    % Hence this just inserts a strut at the beginning of each line.
-    \everypar = {\strut}%
-    %
-    % Since we have a strut on every line, we don't need any of TeX's
-    % normal interline spacing.
-    \offinterlineskip
-    %
-    % OK, but now we have to do something about blank
-    % lines in the input in @example-like environments, which normally
-    % just turn into \lisppar, which will insert no space now that we've
-    % turned off the interline space.  Simplest is to make them be an
-    % empty paragraph.
-    \ifx\par\lisppar
-      \edef\par{\leavevmode \par}%
-      %
-      % Reset ^^M's definition to new definition of \par.
-      \obeylines
-    \fi
-    %
     % Do @comment since we are called inside an environment such as
     % @example, where each end-of-line in the input causes an
     % end-of-line in the output.  We don't want the end-of-line after
@@ -636,6 +683,32 @@
     \comment
 }
 %
+% The \vtop produces a box with normal height and large depth; thus, TeX puts
+% \baselineskip glue before it, and (when the next line of text is done)
+% \lineskip glue after it.  Thus, space below is not quite equal to space
+% above.  But it's pretty close.
+\def\Egroup{%
+    % To get correct interline space between the last line of the group
+    % and the first line afterwards, we have to propagate \prevdepth.
+    \endgraf % Not \par, as it may have been set to \lisppar.
+    \global\dimen1 = \prevdepth
+  \egroup           % End the \vtop.
+  % \dimen0 is the vertical size of the group's box.
+  \dimen0 = \ht\groupbox  \advance\dimen0 by \dp\groupbox
+  % \dimen2 is how much space is left on the page (more or less).
+  \dimen2 = \pageheight   \advance\dimen2 by -\pagetotal
+  % if the group doesn't fit on the current page, and it's a big big
+  % group, force a page break.
+  \ifdim \dimen0 > \dimen2
+    \ifdim \pagetotal < \vfilllimit\pageheight
+      \page
+    \fi
+  \fi
+  \box\groupbox
+  \prevdepth = \dimen1
+  \checkinserts
+}
+%
 % TeX puts in an \escapechar (i.e., `@') at the beginning of the help
 % message, so this ends up printing `@group can only ...'.
 %
@@ -648,10 +721,8 @@ where each line of input produces a line of output.}
 
 \newdimen\mil  \mil=0.001in
 
-\def\need{\parsearg\needx}
-
 % Old definition--didn't work.
-%\def\needx #1{\par %
+%\parseargdef\need{\par %
 %% This method tries to make TeX break the page naturally
 %% if the depth of the box does not fit.
 %{\baselineskip=0pt%
@@ -659,7 +730,7 @@ where each line of input produces a line of output.}
 %\prevdepth=-1000pt
 %}}
 
-\def\needx#1{%
+\parseargdef\need{%
   % Ensure vertical mode, so we don't make a big box in the middle of a
   % paragraph.
   \par
@@ -698,35 +769,10 @@ where each line of input produces a line of output.}
   \fi
 }
 
-% @br   forces paragraph break
+% @br   forces paragraph break (and is undocumented).
 
 \let\br = \par
 
-% @dots{} output an ellipsis using the current font.
-% We do .5em per period so that it has the same spacing in a typewriter
-% font as three actual period characters.
-%
-\def\dots{%
-  \leavevmode
-  \hbox to 1.5em{%
-    \hskip 0pt plus 0.25fil minus 0.25fil
-    .\hss.\hss.%
-    \hskip 0pt plus 0.5fil minus 0.5fil
-  }%
-}
-
-% @enddots{} is an end-of-sentence ellipsis.
-%
-\def\enddots{%
-  \leavevmode
-  \hbox to 2em{%
-    \hskip 0pt plus 0.25fil minus 0.25fil
-    .\hss.\hss.\hss.%
-    \hskip 0pt plus 0.5fil minus 0.5fil
-  }%
-  \spacefactor=3000
-}
-
 % @page forces the start of a new page.
 %
 \def\page{\par\vfill\supereject}
@@ -739,13 +785,11 @@ where each line of input produces a line of output.}
 \newskip\exdentamount
 
 % This defn is used inside fill environments such as @defun.
-\def\exdent{\parsearg\exdentyyy}
-\def\exdentyyy #1{{\hfil\break\hbox{\kern -\exdentamount{\rm#1}}\hfil\break}}
+\parseargdef\exdent{\hfil\break\hbox{\kern -\exdentamount{\rm#1}}\hfil\break}
 
 % This defn is used inside nofill environments such as @example.
-\def\nofillexdent{\parsearg\nofillexdentyyy}
-\def\nofillexdentyyy #1{{\advance \leftskip by -\exdentamount
-\leftline{\hskip\leftskip{\rm#1}}}}
+\parseargdef\nofillexdent{{\advance \leftskip by -\exdentamount
+  \leftline{\hskip\leftskip{\rm#1}}}}
 
 % @inmargin{WHICH}{TEXT} puts TEXT in the WHICH margin next to the current
 % paragraph.  For more general purposes, use the \margin insertion
@@ -797,8 +841,19 @@ where each line of input produces a line of output.}
 }
 
 % @include file    insert text of that file as input.
-% Allow normal characters that  we make active in the argument (a file name).
-\def\include{\begingroup
+%
+\def\include{\parseargusing\filenamecatcodes\includezzz}
+\def\includezzz#1{%
+  \pushthisfilestack
+  \def\thisfile{#1}%
+  {%
+    \makevalueexpandable
+    \def\temp{\input #1 }%
+    \expandafter
+  }\temp
+  \popthisfilestack
+}
+\def\filenamecatcodes{%
   \catcode`\\=\other
   \catcode`~=\other
   \catcode`^=\other
@@ -807,33 +862,50 @@ where each line of input produces a line of output.}
   \catcode`<=\other
   \catcode`>=\other
   \catcode`+=\other
-  \parsearg\includezzz}
-% Restore active chars for included file.
-\def\includezzz#1{\endgroup\begingroup
-  % Read the included file in a group so nested @include's work.
-  \def\thisfile{#1}%
-  \let\value=\expandablevalue
-  \input\thisfile
-\endgroup}
+  \catcode`-=\other
+}
+
+\def\pushthisfilestack{%
+  \expandafter\pushthisfilestackX\popthisfilestack\StackTerm
+}
+\def\pushthisfilestackX{%
+  \expandafter\pushthisfilestackY\thisfile\StackTerm
+}
+\def\pushthisfilestackY #1\StackTerm #2\StackTerm {%
+  \gdef\popthisfilestack{\gdef\thisfile{#1}\gdef\popthisfilestack{#2}}%
+}
+
+\def\popthisfilestack{\errthisfilestackempty}
+\def\errthisfilestackempty{\errmessage{Internal error:
+  the stack of filenames is empty.}}
 
 \def\thisfile{}
 
 % @center line
 % outputs that line, centered.
 %
-\def\center{\parsearg\docenter}
-\def\docenter#1{{%
-  \ifhmode \hfil\break \fi
-  \advance\hsize by -\leftskip
-  \advance\hsize by -\rightskip
-  \line{\hfil \ignorespaces#1\unskip \hfil}%
-  \ifhmode \break \fi
-}}
+\parseargdef\center{%
+  \ifhmode
+    \let\next\centerH
+  \else
+    \let\next\centerV
+  \fi
+  \next{\hfil \ignorespaces#1\unskip \hfil}%
+}
+\def\centerH#1{%
+  {%
+    \hfil\break
+    \advance\hsize by -\leftskip
+    \advance\hsize by -\rightskip
+    \line{#1}%
+    \break
+  }%
+}
+\def\centerV#1{\line{\kern\leftskip #1\kern\rightskip}}
 
 % @sp n   outputs n lines of vertical space
 
-\def\sp{\parsearg\spxxx}
-\def\spxxx #1{\vskip #1\baselineskip}
+\parseargdef\sp{\vskip #1\baselineskip}
 
 % @comment ...line which is ignored...
 % @c is the same as @comment
@@ -854,8 +926,7 @@ where each line of input produces a line of output.}
 \def\asisword{asis} % no translation, these are keywords
 \def\noneword{none}
 %
-\def\paragraphindent{\parsearg\doparagraphindent}
-\def\doparagraphindent#1{%
+\parseargdef\paragraphindent{%
   \def\temp{#1}%
   \ifx\temp\asisword
   \else
@@ -872,8 +943,7 @@ where each line of input produces a line of output.}
 % We'll use ems for NCHARS like @paragraphindent.
 % It seems @exampleindent asis isn't necessary, but
 % I preserve it to make it similar to @paragraphindent.
-\def\exampleindent{\parsearg\doexampleindent}
-\def\doexampleindent#1{%
+\parseargdef\exampleindent{%
   \def\temp{#1}%
   \ifx\temp\asisword
   \else
@@ -887,21 +957,20 @@ where each line of input produces a line of output.}
 
 % @firstparagraphindent WORD
 % If WORD is `none', then suppress indentation of the first paragraph
-% after a section heading.  If WORD is `insert', then do indentat such
+% after a section heading.  If WORD is `insert', then do indent at such
 % paragraphs.
 %
 % The paragraph indentation is suppressed or not by calling
-% \suppressfirstparagraphindent, which the sectioning commands do.  We
-% switch the definition of this back and forth according to WORD.  By
-% default, we suppress indentation.
+% \suppressfirstparagraphindent, which the sectioning commands do.
+% We switch the definition of this back and forth according to WORD.
+% By default, we suppress indentation.
 %
 \def\suppressfirstparagraphindent{\dosuppressfirstparagraphindent}
 \newdimen\currentparindent
 %
 \def\insertword{insert}
 %
-\def\firstparagraphindent{\parsearg\dofirstparagraphindent}
-\def\dofirstparagraphindent#1{%
+\parseargdef\firstparagraphindent{%
   \def\temp{#1}%
   \ifx\temp\noneword
     \let\suppressfirstparagraphindent = \dosuppressfirstparagraphindent
@@ -921,15 +990,24 @@ where each line of input produces a line of output.}
 %
 \gdef\dosuppressfirstparagraphindent{%
   \gdef\indent{%
-    \global\let\indent=\ptexindent
-    \global\everypar = {}%
+    \restorefirstparagraphindent
+    \indent
+  }%
+  \gdef\noindent{%
+    \restorefirstparagraphindent
+    \noindent
   }%
   \global\everypar = {%
-    \kern-\parindent
-    \global\let\indent=\ptexindent
-    \global\everypar = {}%
+    \kern -\parindent
+    \restorefirstparagraphindent
   }%
-}%
+}
+
+\gdef\restorefirstparagraphindent{%
+  \global \let \indent = \ptexindent
+  \global \let \noindent = \ptexnoindent
+  \global \everypar = {}%
+}
 
 
 % @asis just yields its argument.  Used with @table, for example.
@@ -937,23 +1015,18 @@ where each line of input produces a line of output.}
 \def\asis#1{#1}
 
 % @math outputs its argument in math mode.
-% We don't use $'s directly in the definition of \math because we need
-% to set catcodes according to plain TeX first, to allow for subscripts,
-% superscripts, special math chars, etc.
-%
-\let\implicitmath = $%$ font-lock fix
 %
 % One complication: _ usually means subscripts, but it could also mean
 % an actual _ character, as in @math{@var{some_variable} + 1}.  So make
-% _ within @math be active (mathcode "8000), and distinguish by seeing
-% if the current family is \slfam, which is what @var uses.
-%
-{\catcode\underChar = \active
-\gdef\mathunderscore{%
-  \catcode\underChar=\active
-  \def_{\ifnum\fam=\slfam \_\else\sb\fi}%
-}}
-%
+% _ active, and distinguish by seeing if the current family is \slfam,
+% which is what @var uses.
+{
+  \catcode\underChar = \active
+  \gdef\mathunderscore{%
+    \catcode\underChar=\active
+    \def_{\ifnum\fam=\slfam \_\else\sb\fi}%
+  }
+}
 % Another complication: we want \\ (and @\) to output a \ character.
 % FYI, plain.tex uses \\ as a temporary control sequence (why?), but
 % this is not advertised and we don't care.  Texinfo does not
@@ -964,15 +1037,16 @@ where each line of input produces a line of output.}
 %
 \def\math{%
   \tex
-  \mathcode`\_="8000 \mathunderscore
+  \mathunderscore
   \let\\ = \mathbackslash
   \mathactive
-  \implicitmath\finishmath}
-\def\finishmath#1{#1\implicitmath\Etex}
+  $\finishmath
+}
+\def\finishmath#1{#1$\endgroup}  % Close the group opened by \tex.
 
 % Some active characters (such as <) are spaced differently in math.
-% We have to reset their definitions in case the @math was an
-% argument to a command which set the catcodes (such as @item or @section).
+% We have to reset their definitions in case the @math was an argument
+% to a command which sets the catcodes (such as @item or @section).
 %
 {
   \catcode`^ = \active
@@ -988,8 +1062,33 @@ where each line of input produces a line of output.}
 }
 
 % @bullet and @minus need the same treatment as @math, just above.
-\def\bullet{\implicitmath\ptexbullet\implicitmath}
-\def\minus{\implicitmath-\implicitmath}
+\def\bullet{$\ptexbullet$}
+\def\minus{$-$}
+
+% @dots{} outputs an ellipsis using the current font.
+% We do .5em per period so that it has the same spacing in a typewriter
+% font as three actual period characters.
+%
+\def\dots{%
+  \leavevmode
+  \hbox to 1.5em{%
+    \hskip 0pt plus 0.25fil
+    .\hfil.\hfil.%
+    \hskip 0pt plus 0.5fil
+  }%
+}
+
+% @enddots{} is an end-of-sentence ellipsis.
+%
+\def\enddots{%
+  \dots
+  \spacefactor=3000
+}
+
+% @comma{} is so commas can be inserted into text without messing up
+% Texinfo's parsing.
+% 
+\let\comma = ,
 
 % @refill is a no-op.
 \let\refill=\relax
@@ -1006,7 +1105,9 @@ where each line of input produces a line of output.}
 % This makes it possible to make a .fmt file for texinfo.
 \def\setfilename{%
    \iflinks
-     \readauxfile
+     \tryauxfile
+     % Open the new aux file.  TeX will close it automatically at exit.
+     \immediate\openout\auxfile=\jobname.aux
    \fi % \openindices needs to do some work in any case.
    \openindices
    \fixbackslash  % Turn off hack to swallow `\input texinfo'.
@@ -1014,11 +1115,9 @@ where each line of input produces a line of output.}
    %
    % If texinfo.cnf is present on the system, read it.
    % Useful for site-wide @afourpaper, etc.
-   % Just to be on the safe side, close the input stream before the \input.
    \openin 1 texinfo.cnf
-   \ifeof1 \let\temp=\relax \else \def\temp{\input texinfo.cnf }\fi
-   \closein1
-   \temp
+   \ifeof 1 \else \input texinfo.cnf \fi
+   \closein 1
    %
    \comment % Ignore the actual filename.
 }
@@ -1065,6 +1164,7 @@ where each line of input produces a line of output.}
   \pdftrue
   \pdfoutput = 1
   \input pdfcolor
+  \pdfcatalog{/PageMode /UseOutlines}%
   \def\dopdfimage#1#2#3{%
     \def\imagewidth{#2}%
     \def\imageheight{#3}%
@@ -1085,7 +1185,13 @@ where each line of input produces a line of output.}
     \ifnum\pdftexversion < 14 \else
       \pdfrefximage \pdflastximage
     \fi}
-  \def\pdfmkdest#1{{\normalturnoffactive \pdfdest name{#1} xyz}}
+  \def\pdfmkdest#1{{%
+    % We have to set dummies so commands such as @code in a section title
+    % aren't expanded.
+    \atdummies
+    \normalturnoffactive
+    \pdfdest name{#1} xyz%
+  }}
   \def\pdfmkpgn#1{#1}
   \let\linkcolor = \Blue  % was Cyan, but that seems light?
   \def\endlink{\Black\pdfendlink}
@@ -1094,48 +1200,86 @@ where each line of input produces a line of output.}
   \def\expnumber#1{\expandafter\ifx\csname#1\endcsname\relax 0%
     \else \csname#1\endcsname \fi}
   \def\advancenumber#1{\tempnum=\expnumber{#1}\relax
-    \advance\tempnum by1
+    \advance\tempnum by 1
     \expandafter\xdef\csname#1\endcsname{\the\tempnum}}
-  \def\pdfmakeoutlines{{%
-    \openin 1 \jobname.toc
-    \ifeof 1\else\begingroup
-      \closein 1
+  %
+  % #1 is the section text.  #2 is the pdf expression for the number
+  % of subentries (or empty, for subsubsections).  #3 is the node
+  % text, which might be empty if this toc entry had no
+  % corresponding node.  #4 is the page number.
+  % 
+  \def\dopdfoutline#1#2#3#4{%
+    % Generate a link to the node text if that exists; else, use the
+    % page number.  We could generate a destination for the section
+    % text in the case where a section has no node, but it doesn't
+    % seem worthwhile, since most documents are normally structured.
+    \def\pdfoutlinedest{#3}%
+    \ifx\pdfoutlinedest\empty \def\pdfoutlinedest{#4}\fi
+    %
+    \pdfoutline goto name{\pdfmkpgn{\pdfoutlinedest}}#2{#1}%
+  }
+  %
+  \def\pdfmakeoutlines{%
+    \begingroup
       % Thanh's hack / proper braces in bookmarks
       \edef\mylbrace{\iftrue \string{\else}\fi}\let\{=\mylbrace
       \edef\myrbrace{\iffalse{\else\string}\fi}\let\}=\myrbrace
       %
-      \def\chapentry ##1##2##3{}
-      \def\secentry ##1##2##3##4{\advancenumber{chap##2}}
-      \def\subsecentry ##1##2##3##4##5{\advancenumber{sec##2.##3}}
-      \def\subsubsecentry ##1##2##3##4##5##6{\advancenumber{subsec##2.##3.##4}}
-      \let\appendixentry = \chapentry
-      \let\unnumbchapentry = \chapentry
-      \let\unnumbsecentry = \secentry
-      \let\unnumbsubsecentry = \subsecentry
-      \let\unnumbsubsubsecentry = \subsubsecentry
+      % Read toc silently, to get counts of subentries for \pdfoutline.
+      \def\numchapentry##1##2##3##4{%
+	\def\thischapnum{##2}%
+	\let\thissecnum\empty
+	\let\thissubsecnum\empty
+      }%
+      \def\numsecentry##1##2##3##4{%
+	\advancenumber{chap\thischapnum}%
+	\def\thissecnum{##2}%
+	\let\thissubsecnum\empty
+      }%
+      \def\numsubsecentry##1##2##3##4{%
+	\advancenumber{sec\thissecnum}%
+	\def\thissubsecnum{##2}%
+      }%
+      \def\numsubsubsecentry##1##2##3##4{%
+	\advancenumber{subsec\thissubsecnum}%
+      }%
+      \let\thischapnum\empty
+      \let\thissecnum\empty
+      \let\thissubsecnum\empty
+      %
+      % use \def rather than \let here because we redefine \chapentry et
+      % al. a second time, below.
+      \def\appentry{\numchapentry}%
+      \def\appsecentry{\numsecentry}%
+      \def\appsubsecentry{\numsubsecentry}%
+      \def\appsubsubsecentry{\numsubsubsecentry}%
+      \def\unnchapentry{\numchapentry}%
+      \def\unnsecentry{\numsecentry}%
+      \def\unnsubsecentry{\numsubsecentry}%
+      \def\unnsubsubsecentry{\numsubsubsecentry}%
       \input \jobname.toc
-      \def\chapentry ##1##2##3{%
-        \pdfoutline goto name{\pdfmkpgn{##3}}count-\expnumber{chap##2}{##1}}
-      \def\secentry ##1##2##3##4{%
-        \pdfoutline goto name{\pdfmkpgn{##4}}count-\expnumber{sec##2.##3}{##1}}
-      \def\subsecentry ##1##2##3##4##5{%
-        \pdfoutline goto name{\pdfmkpgn{##5}}count-\expnumber{subsec##2.##3.##4}{##1}}
-      \def\subsubsecentry ##1##2##3##4##5##6{%
-        \pdfoutline goto name{\pdfmkpgn{##6}}{##1}}
-      \let\appendixentry = \chapentry
-      \let\unnumbchapentry = \chapentry
-      \let\unnumbsecentry = \secentry
-      \let\unnumbsubsecentry = \subsecentry
-      \let\unnumbsubsubsecentry = \subsubsecentry
       %
-      % Make special characters normal for writing to the pdf file.
+      % Read toc second time, this time actually producing the outlines.
+      % The `-' means take the \expnumber as the absolute number of
+      % subentries, which we calculated on our first read of the .toc above.
+      % 
+      % We use the node names as the destinations.
+      \def\numchapentry##1##2##3##4{%
+        \dopdfoutline{##1}{count-\expnumber{chap##2}}{##3}{##4}}%
+      \def\numsecentry##1##2##3##4{%
+        \dopdfoutline{##1}{count-\expnumber{sec##2}}{##3}{##4}}%
+      \def\numsubsecentry##1##2##3##4{%
+        \dopdfoutline{##1}{count-\expnumber{subsec##2}}{##3}{##4}}%
+      \def\numsubsubsecentry##1##2##3##4{% count is always zero
+        \dopdfoutline{##1}{}{##3}{##4}}%
       %
+      % Make special characters normal for writing to the pdf file.
       \indexnofonts
-      \let\tt=\relax
       \turnoffactive
       \input \jobname.toc
-    \endgroup\fi
-  }}
+    \endgroup
+  }
+  %
   \def\makelinks #1,{%
     \def\params{#1}\def\E{END}%
     \ifx\params\E
@@ -1184,7 +1328,7 @@ where each line of input produces a line of output.}
   \def\pdfurl#1{%
     \begingroup
       \normalturnoffactive\def\@{@}%
-      \let\value=\expandablevalue
+      \makevalueexpandable
       \leavevmode\Red
       \startlink attr{/Border [0 0 0]}%
         user{/Subtype /Link /A << /S /URI /URI (#1) >>}%
@@ -1219,16 +1363,34 @@ where each line of input produces a line of output.}
 
 
 \message{fonts,}
-% Font-change commands.
+
+% Change the current font style to #1, remembering it in \curfontstyle.
+% For now, we do not accumulate font styles: @b{@i{foo}} prints foo in
+% italics, not bold italics.
+% 
+\def\setfontstyle#1{%
+  \def\curfontstyle{#1}% not as a control sequence, because we are \edef'd.
+  \csname ten#1\endcsname  % change the current font
+}
+
+% Select #1 fonts with the current style.
+% 
+\def\selectfonts#1{\csname #1fonts\endcsname \csname\curfontstyle\endcsname}
+
+\def\rm{\fam=0 \setfontstyle{rm}}
+\def\it{\fam=\itfam \setfontstyle{it}}
+\def\sl{\fam=\slfam \setfontstyle{sl}}
+\def\bf{\fam=\bffam \setfontstyle{bf}}
+\def\tt{\fam=\ttfam \setfontstyle{tt}}
 
 % Texinfo sort of supports the sans serif font style, which plain TeX does not.
-% So we set up a \sf analogous to plain's \rm, etc.
+% So we set up a \sf.
 \newfam\sffam
-\def\sf{\fam=\sffam \tensf}
+\def\sf{\fam=\sffam \setfontstyle{sf}}
 \let\li = \sf % Sometimes we call it \li, not \sf.
 
-% We don't need math for this one.
-\def\ttsl{\tenttsl}
+% We don't need math for this font style.
+\def\ttsl{\setfontstyle{ttsl}}
 
 % Default leading.
 \newdimen\textleading  \textleading = 13.2pt
@@ -1279,6 +1441,7 @@ where each line of input produces a line of output.}
 \def\scshape{csc}
 \def\scbshape{csc}
 
+% Text fonts (11.2pt, magstep1).
 \newcount\mainmagstep
 \ifx\bigger\relax
   % not really supported.
@@ -1290,10 +1453,6 @@ where each line of input produces a line of output.}
   \setfont\textrm\rmshape{10}{\mainmagstep}
   \setfont\texttt\ttshape{10}{\mainmagstep}
 \fi
-% Instead of cmb10, you may want to use cmbx10.
-% cmbx10 is a prettier font on its own, but cmb10
-% looks better when embedded in a line with cmr10
-% (in Bob's opinion).
 \setfont\textbf\bfshape{10}{\mainmagstep}
 \setfont\textit\itshape{10}{\mainmagstep}
 \setfont\textsl\slshape{10}{\mainmagstep}
@@ -1303,10 +1462,11 @@ where each line of input produces a line of output.}
 \font\texti=cmmi10 scaled \mainmagstep
 \font\textsy=cmsy10 scaled \mainmagstep
 
-% A few fonts for @defun, etc.
-\setfont\defbf\bxshape{10}{\magstep1} %was 1314
+% A few fonts for @defun names and args.
+\setfont\defbf\bfshape{10}{\magstep1}
 \setfont\deftt\ttshape{10}{\magstep1}
-\def\df{\let\tentt=\deftt \let\tenbf = \defbf \bf}
+\setfont\defttsl\ttslshape{10}{\magstep1}
+\def\df{\let\tentt=\deftt \let\tenbf = \defbf \let\tenttsl=\defttsl \bf}
 
 % Fonts for indices, footnotes, small examples (9pt).
 \setfont\smallrm\rmshape{9}{1000}
@@ -1332,7 +1492,7 @@ where each line of input produces a line of output.}
 \font\smalleri=cmmi8
 \font\smallersy=cmsy8
 
-% Fonts for title page:
+% Fonts for title page (20.4pt):
 \setfont\titlerm\rmbshape{12}{\magstep3}
 \setfont\titleit\itbshape{10}{\magstep4}
 \setfont\titlesl\slbshape{10}{\magstep4}
@@ -1378,11 +1538,21 @@ where each line of input produces a line of output.}
 \setfont\ssecttsl\ttslshape{10}{1315}
 \setfont\ssecsf\sfbshape{12}{\magstephalf}
 \let\ssecbf\ssecrm
-\setfont\ssecsc\scbshape{10}{\magstep1}
+\setfont\ssecsc\scbshape{10}{1315}
 \font\sseci=cmmi12 scaled \magstephalf
 \font\ssecsy=cmsy10 scaled 1315
-% The smallcaps and symbol fonts should actually be scaled \magstep1.5,
-% but that is not a standard magnification.
+
+% Reduced fonts for @acro in text (10pt).
+\setfont\reducedrm\rmshape{10}{1000}
+\setfont\reducedtt\ttshape{10}{1000}
+\setfont\reducedbf\bfshape{10}{1000}
+\setfont\reducedit\itshape{10}{1000}
+\setfont\reducedsl\slshape{10}{1000}
+\setfont\reducedsf\sfshape{10}{1000}
+\setfont\reducedsc\scshape{10}{1000}
+\setfont\reducedttsl\ttslshape{10}{1000}
+\font\reducedi=cmmi10
+\font\reducedsy=cmsy10
 
 % In order for the font changes to affect most math symbols and letters,
 % we have to define the \textfont of the standard families.  Since
@@ -1397,50 +1567,72 @@ where each line of input produces a line of output.}
 }
 
 % The font-changing commands redefine the meanings of \tenSTYLE, instead
-% of just \STYLE.  We do this so that font changes will continue to work
-% in math mode, where it is the current \fam that is relevant in most
-% cases, not the current font.  Plain TeX does \def\bf{\fam=\bffam
-% \tenbf}, for example.  By redefining \tenbf, we obviate the need to
-% redefine \bf itself.
+% of just \STYLE.  We do this because \STYLE needs to also set the
+% current \fam for math mode.  Our \STYLE (e.g., \rm) commands hardwire
+% \tenSTYLE to set the current font.
+% 
+% Each font-changing command also sets the names \lsize (one size lower)
+% and \lllsize (three sizes lower).  These relative commands are used in
+% the LaTeX logo and acronyms.
+% 
+% This all needs generalizing, badly.
+% 
 \def\textfonts{%
   \let\tenrm=\textrm \let\tenit=\textit \let\tensl=\textsl
   \let\tenbf=\textbf \let\tentt=\texttt \let\smallcaps=\textsc
-  \let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy \let\tenttsl=\textttsl
+  \let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy
+  \let\tenttsl=\textttsl
+  \def\lsize{reduced}\def\lllsize{smaller}%
   \resetmathfonts \setleading{\textleading}}
 \def\titlefonts{%
   \let\tenrm=\titlerm \let\tenit=\titleit \let\tensl=\titlesl
   \let\tenbf=\titlebf \let\tentt=\titlett \let\smallcaps=\titlesc
   \let\tensf=\titlesf \let\teni=\titlei \let\tensy=\titlesy
   \let\tenttsl=\titlettsl
+  \def\lsize{chap}\def\lllsize{subsec}%
   \resetmathfonts \setleading{25pt}}
 \def\titlefont#1{{\titlefonts\rm #1}}
 \def\chapfonts{%
   \let\tenrm=\chaprm \let\tenit=\chapit \let\tensl=\chapsl
   \let\tenbf=\chapbf \let\tentt=\chaptt \let\smallcaps=\chapsc
   \let\tensf=\chapsf \let\teni=\chapi \let\tensy=\chapsy \let\tenttsl=\chapttsl
+  \def\lsize{sec}\def\lllsize{text}%
   \resetmathfonts \setleading{19pt}}
 \def\secfonts{%
   \let\tenrm=\secrm \let\tenit=\secit \let\tensl=\secsl
   \let\tenbf=\secbf \let\tentt=\sectt \let\smallcaps=\secsc
-  \let\tensf=\secsf \let\teni=\seci \let\tensy=\secsy \let\tenttsl=\secttsl
+  \let\tensf=\secsf \let\teni=\seci \let\tensy=\secsy
+  \let\tenttsl=\secttsl
+  \def\lsize{subsec}\def\lllsize{reduced}%
   \resetmathfonts \setleading{16pt}}
 \def\subsecfonts{%
   \let\tenrm=\ssecrm \let\tenit=\ssecit \let\tensl=\ssecsl
   \let\tenbf=\ssecbf \let\tentt=\ssectt \let\smallcaps=\ssecsc
-  \let\tensf=\ssecsf \let\teni=\sseci \let\tensy=\ssecsy \let\tenttsl=\ssecttsl
+  \let\tensf=\ssecsf \let\teni=\sseci \let\tensy=\ssecsy
+  \let\tenttsl=\ssecttsl
+  \def\lsize{text}\def\lllsize{small}%
   \resetmathfonts \setleading{15pt}}
-\let\subsubsecfonts = \subsecfonts % Maybe make sssec fonts scaled magstephalf?
+\let\subsubsecfonts = \subsecfonts
+\def\reducedfonts{%
+  \let\tenrm=\reducedrm \let\tenit=\reducedit \let\tensl=\reducedsl
+  \let\tenbf=\reducedbf \let\tentt=\reducedtt \let\reducedcaps=\reducedsc
+  \let\tensf=\reducedsf \let\teni=\reducedi \let\tensy=\reducedsy
+  \let\tenttsl=\reducedttsl
+  \def\lsize{small}\def\lllsize{smaller}%
+  \resetmathfonts \setleading{10.5pt}}
 \def\smallfonts{%
   \let\tenrm=\smallrm \let\tenit=\smallit \let\tensl=\smallsl
   \let\tenbf=\smallbf \let\tentt=\smalltt \let\smallcaps=\smallsc
   \let\tensf=\smallsf \let\teni=\smalli \let\tensy=\smallsy
   \let\tenttsl=\smallttsl
+  \def\lsize{smaller}\def\lllsize{smaller}%
   \resetmathfonts \setleading{10.5pt}}
 \def\smallerfonts{%
   \let\tenrm=\smallerrm \let\tenit=\smallerit \let\tensl=\smallersl
   \let\tenbf=\smallerbf \let\tentt=\smallertt \let\smallcaps=\smallersc
   \let\tensf=\smallersf \let\teni=\smalleri \let\tensy=\smallersy
   \let\tenttsl=\smallerttsl
+  \def\lsize{smaller}\def\lllsize{smaller}%
   \resetmathfonts \setleading{9.5pt}}
 
 % Set the fonts to use with the @small... environments.
@@ -1449,7 +1641,7 @@ where each line of input produces a line of output.}
 % About \smallexamplefonts.  If we use \smallfonts (9pt), @smallexample
 % can fit this many characters:
 %   8.5x11=86   smallbook=72  a4=90  a5=69
-% If we use \smallerfonts (8pt), then we can fit this many characters:
+% If we use \scriptfonts (8pt), then we can fit this many characters:
 %   8.5x11=90+  smallbook=80  a4=90+  a5=77
 % For me, subjectively, the few extra characters that fit aren't worth
 % the additional smallness of 8pt.  So I'm making the default 9pt.
@@ -1457,14 +1649,13 @@ where each line of input produces a line of output.}
 % By the way, for comparison, here's what fits with @example (10pt):
 %   8.5x11=71  smallbook=60  a4=75  a5=58
 %
-% I wish we used A4 paper on this side of the Atlantic.
-%
+% I wish the USA used A4 paper.
 % --karl, 24jan03.
 
 
 % Set up the default fonts, so we can use them for creating boxes.
 %
-\textfonts
+\textfonts \rm
 
 % Define these so they can be easily changed for other fonts.
 \def\angleleft{$\langle$}
@@ -1475,7 +1666,7 @@ where each line of input produces a line of output.}
 
 % Fonts for short table of contents.
 \setfont\shortcontrm\rmshape{12}{1000}
-\setfont\shortcontbf\bxshape{12}{1000}
+\setfont\shortcontbf\bfshape{10}{\magstep1}  % no cmb12
 \setfont\shortcontsl\slshape{12}{1000}
 \setfont\shortconttt\ttshape{12}{1000}
 
@@ -1489,11 +1680,18 @@ where each line of input produces a line of output.}
 \def\smartslanted#1{{\ifusingtt\ttsl\sl #1}\futurelet\next\smartitalicx}
 \def\smartitalic#1{{\ifusingtt\ttsl\it #1}\futurelet\next\smartitalicx}
 
+% like \smartslanted except unconditionally uses \ttsl.
+% @var is set to this for defun arguments.
+\def\ttslanted#1{{\ttsl #1}\futurelet\next\smartitalicx}
+
+% like \smartslanted except unconditionally use \sl.  We never want
+% ttsl for book titles, do we?
+\def\cite#1{{\sl #1}\futurelet\next\smartitalicx}
+
 \let\i=\smartitalic
 \let\var=\smartslanted
 \let\dfn=\smartslanted
 \let\emph=\smartitalic
-\let\cite=\smartslanted
 
 \def\b#1{{\bf #1}}
 \let\strong=\b
@@ -1520,7 +1718,6 @@ where each line of input produces a line of output.}
   {\tt \rawbackslash \frenchspacing #1}%
   \null
 }
-\let\ttfont=\t
 \def\samp#1{`\tclose{#1}'\null}
 \setfont\keyrm\rmshape{8}{1000}
 \font\keysy=cmsy9
@@ -1561,7 +1758,7 @@ where each line of input produces a line of output.}
   \null
 }
 
-% We *must* turn on hyphenation at `-' and `_' in \code.
+% We *must* turn on hyphenation at `-' and `_' in @code.
 % Otherwise, it is too hard to avoid overfull hboxes
 % in the Emacs manual, the Library manual, etc.
 
@@ -1579,10 +1776,6 @@ where each line of input produces a line of output.}
     \catcode`\_=\active \let_\codeunder
     \codex
   }
-  %
-  % If we end up with any active - characters when handling the index,
-  % just treat them as a normal -.
-  \global\def\indexbreaks{\catcode`\-=\active \let-\realdash}
 }
 
 \def\realdash{-}
@@ -1606,8 +1799,7 @@ where each line of input produces a line of output.}
 % @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always),
 %   `example' (@kbd uses ttsl only inside of @example and friends),
 %   or `code' (@kbd uses normal tty font always).
-\def\kbdinputstyle{\parsearg\kbdinputstylexxx}
-\def\kbdinputstylexxx#1{%
+\parseargdef\kbdinputstyle{%
   \def\arg{#1}%
   \ifx\arg\worddistinct
     \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}%
@@ -1707,19 +1899,26 @@ where each line of input produces a line of output.}
 \def\sc#1{{\smallcaps#1}}       % smallcaps font
 \def\ii#1{{\it #1}}             % italic font
 
-% @acronym downcases the argument and prints in smallcaps.
-\def\acronym#1{{\smallcaps \lowercase{#1}}}
+\def\acronym#1{\doacronym #1,,\finish}
+\def\doacronym#1,#2,#3\finish{%
+  {\selectfonts\lsize #1}%
+  \def\temp{#2}%
+  \ifx\temp\empty \else
+    \space ({\unsepspaces \ignorespaces \temp \unskip})%
+  \fi
+}
 
-% @pounds{} is a sterling sign.
+% @pounds{} is a sterling sign, which is in the CM italic font.
+% 
 \def\pounds{{\it\$}}
 
-% @registeredsymbol - R in a circle.  For now, only works in text size;
-% we'd have to redo the font mechanism to change the \scriptstyle and
-% \scriptscriptstyle font sizes to make it look right in headings.
+% @registeredsymbol - R in a circle.  The font for the R should really
+% be smaller yet, but lllsize is the best we can do for now.
 % Adapted from the plain.tex definition of \copyright.
 %
 \def\registeredsymbol{%
-  $^{{\ooalign{\hfil\raise.07ex\hbox{$\scriptstyle\rm R$}\hfil\crcr\Orb}}%
+  $^{{\ooalign{\hfil\raise.07ex\hbox{\selectfonts\lllsize R}%
+               \hfil\crcr\Orb}}%
     }$%
 }
 
@@ -1741,87 +1940,102 @@ where each line of input produces a line of output.}
 \newif\ifsetshortcontentsaftertitlepage
  \let\setshortcontentsaftertitlepage = \setshortcontentsaftertitlepagetrue
 
-\def\shorttitlepage{\parsearg\shorttitlepagezzz}
-\def\shorttitlepagezzz #1{\begingroup\hbox{}\vskip 1.5in \chaprm \centerline{#1}%
+\parseargdef\shorttitlepage{\begingroup\hbox{}\vskip 1.5in \chaprm \centerline{#1}%
         \endgroup\page\hbox{}\page}
 
-\def\titlepage{\begingroup \parindent=0pt \textfonts
-   \let\subtitlerm=\tenrm
-   \def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines}%
-   %
-   \def\authorfont{\authorrm \normalbaselineskip = 16pt \normalbaselines
-                   \let\tt=\authortt}%
-   %
-   % Leave some space at the very top of the page.
-   \vglue\titlepagetopglue
-   %
-   % Now you can print the title using @title.
-   \def\title{\parsearg\titlezzz}%
-   \def\titlezzz##1{\leftline{\titlefonts\rm ##1}
-                    % print a rule at the page bottom also.
-                    \finishedtitlepagefalse
-                    \vskip4pt \hrule height 4pt width \hsize \vskip4pt}%
-   % No rule at page bottom unless we print one at the top with @title.
-   \finishedtitlepagetrue
-   %
-   % Now you can put text using @subtitle.
-   \def\subtitle{\parsearg\subtitlezzz}%
-   \def\subtitlezzz##1{{\subtitlefont \rightline{##1}}}%
-   %
-   % @author should come last, but may come many times.
-   \def\author{\parsearg\authorzzz}%
-   \def\authorzzz##1{\ifseenauthor\else\vskip 0pt plus 1filll\seenauthortrue\fi
-      {\authorfont \leftline{##1}}}%
-   %
-   % Most title ``pages'' are actually two pages long, with space
-   % at the top of the second.  We don't want the ragged left on the second.
-   \let\oldpage = \page
-   \def\page{%
+\envdef\titlepage{%
+  % Open one extra group, as we want to close it in the middle of \Etitlepage.
+  \begingroup
+    \parindent=0pt \textfonts
+    % Leave some space at the very top of the page.
+    \vglue\titlepagetopglue
+    % No rule at page bottom unless we print one at the top with @title.
+    \finishedtitlepagetrue
+    %
+    % Most title ``pages'' are actually two pages long, with space
+    % at the top of the second.  We don't want the ragged left on the second.
+    \let\oldpage = \page
+    \def\page{%
       \iffinishedtitlepage\else
-         \finishtitlepage
+	 \finishtitlepage
       \fi
-      \oldpage
       \let\page = \oldpage
-      \hbox{}}%
-%   \def\page{\oldpage \hbox{}}
+      \page
+      \null
+    }%
 }
 
 \def\Etitlepage{%
-   \iffinishedtitlepage\else
-      \finishtitlepage
-   \fi
-   % It is important to do the page break before ending the group,
-   % because the headline and footline are only empty inside the group.
-   % If we use the new definition of \page, we always get a blank page
-   % after the title page, which we certainly don't want.
-   \oldpage
-   \endgroup
-   %
-   % Need this before the \...aftertitlepage checks so that if they are
-   % in effect the toc pages will come out with page numbers.
-   \HEADINGSon
-   %
-   % If they want short, they certainly want long too.
-   \ifsetshortcontentsaftertitlepage
-     \shortcontents
-     \contents
-     \global\let\shortcontents = \relax
-     \global\let\contents = \relax
-   \fi
-   %
-   \ifsetcontentsaftertitlepage
-     \contents
-     \global\let\contents = \relax
-     \global\let\shortcontents = \relax
-   \fi
+    \iffinishedtitlepage\else
+	\finishtitlepage
+    \fi
+    % It is important to do the page break before ending the group,
+    % because the headline and footline are only empty inside the group.
+    % If we use the new definition of \page, we always get a blank page
+    % after the title page, which we certainly don't want.
+    \oldpage
+  \endgroup
+  %
+  % Need this before the \...aftertitlepage checks so that if they are
+  % in effect the toc pages will come out with page numbers.
+  \HEADINGSon
+  %
+  % If they want short, they certainly want long too.
+  \ifsetshortcontentsaftertitlepage
+    \shortcontents
+    \contents
+    \global\let\shortcontents = \relax
+    \global\let\contents = \relax
+  \fi
+  %
+  \ifsetcontentsaftertitlepage
+    \contents
+    \global\let\contents = \relax
+    \global\let\shortcontents = \relax
+  \fi
 }
 
 \def\finishtitlepage{%
-   \vskip4pt \hrule height 2pt width \hsize
-   \vskip\titlepagebottomglue
-   \finishedtitlepagetrue
+  \vskip4pt \hrule height 2pt width \hsize
+  \vskip\titlepagebottomglue
+  \finishedtitlepagetrue
 }
 
+%%% Macros to be used within @titlepage:
+
+\let\subtitlerm=\tenrm
+\def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines}
+
+\def\authorfont{\authorrm \normalbaselineskip = 16pt \normalbaselines
+		\let\tt=\authortt}
+
+\parseargdef\title{%
+  \checkenv\titlepage
+  \leftline{\titlefonts\rm #1}
+  % print a rule at the page bottom also.
+  \finishedtitlepagefalse
+  \vskip4pt \hrule height 4pt width \hsize \vskip4pt
+}
+
+\parseargdef\subtitle{%
+  \checkenv\titlepage
+  {\subtitlefont \rightline{#1}}%
+}
+
+% @author should come last, but may come many times.
+\parseargdef\author{%
+  \def\temp{\quotation}%
+  \ifx\thisenv\temp
+    This edition of the manual is dedicated to Karl Berry who should
+    really make affiliations work.
+  \else
+    \checkenv\titlepage
+    \ifseenauthor\else \vskip 0pt plus 1filll \seenauthortrue \fi
+    {\authorfont \leftline{#1}}%
+  \fi
+}
+
+
 %%% Set up page headings and footings.
 
 \let\thispage=\folio
@@ -1831,7 +2045,7 @@ where each line of input produces a line of output.}
 \newtoks\evenfootline    % footline on even pages
 \newtoks\oddfootline     % footline on odd pages
 
-% Now make Tex use those variables
+% Now make TeX use those variables
 \headline={{\textfonts\rm \ifodd\pageno \the\oddheadline
                             \else \the\evenheadline \fi}}
 \footline={{\textfonts\rm \ifodd\pageno \the\oddfootline
@@ -1845,32 +2059,27 @@ where each line of input produces a line of output.}
 % @evenfooting @thisfile||
 % @oddfooting ||@thisfile
 
-\def\evenheading{\parsearg\evenheadingxxx}
-\def\oddheading{\parsearg\oddheadingxxx}
-\def\everyheading{\parsearg\everyheadingxxx}
 
-\def\evenfooting{\parsearg\evenfootingxxx}
-\def\oddfooting{\parsearg\oddfootingxxx}
-\def\everyfooting{\parsearg\everyfootingxxx}
-
-{\catcode`\@=0 %
-
-\gdef\evenheadingxxx #1{\evenheadingyyy #1@|@|@|@|\finish}
-\gdef\evenheadingyyy #1@|#2@|#3@|#4\finish{%
+\def\evenheading{\parsearg\evenheadingxxx}
+\def\evenheadingxxx #1{\evenheadingyyy #1\|\|\|\|\finish}
+\def\evenheadingyyy #1\|#2\|#3\|#4\finish{%
 \global\evenheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
 
-\gdef\oddheadingxxx #1{\oddheadingyyy #1@|@|@|@|\finish}
-\gdef\oddheadingyyy #1@|#2@|#3@|#4\finish{%
+\def\oddheading{\parsearg\oddheadingxxx}
+\def\oddheadingxxx #1{\oddheadingyyy #1\|\|\|\|\finish}
+\def\oddheadingyyy #1\|#2\|#3\|#4\finish{%
 \global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
 
-\gdef\everyheadingxxx#1{\oddheadingxxx{#1}\evenheadingxxx{#1}}%
+\parseargdef\everyheading{\oddheadingxxx{#1}\evenheadingxxx{#1}}%
 
-\gdef\evenfootingxxx #1{\evenfootingyyy #1@|@|@|@|\finish}
-\gdef\evenfootingyyy #1@|#2@|#3@|#4\finish{%
+\def\evenfooting{\parsearg\evenfootingxxx}
+\def\evenfootingxxx #1{\evenfootingyyy #1\|\|\|\|\finish}
+\def\evenfootingyyy #1\|#2\|#3\|#4\finish{%
 \global\evenfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
 
-\gdef\oddfootingxxx #1{\oddfootingyyy #1@|@|@|@|\finish}
-\gdef\oddfootingyyy #1@|#2@|#3@|#4\finish{%
+\def\oddfooting{\parsearg\oddfootingxxx}
+\def\oddfootingxxx #1{\oddfootingyyy #1\|\|\|\|\finish}
+\def\oddfootingyyy #1\|#2\|#3\|#4\finish{%
   \global\oddfootline = {\rlap{\centerline{#2}}\line{#1\hfil#3}}%
   %
   % Leave some space for the footline.  Hopefully ok to assume
@@ -1879,9 +2088,8 @@ where each line of input produces a line of output.}
   \global\advance\vsize by -\baselineskip
 }
 
-\gdef\everyfootingxxx#1{\oddfootingxxx{#1}\evenfootingxxx{#1}}
-%
-}% unbind the catcode of @.
+\parseargdef\everyfooting{\oddfootingxxx{#1}\evenfootingxxx{#1}}
+
 
 % @headings double      turns headings on for double-sided printing.
 % @headings single      turns headings on for single-sided printing.
@@ -1895,7 +2103,7 @@ where each line of input produces a line of output.}
 
 \def\headings #1 {\csname HEADINGS#1\endcsname}
 
-\def\HEADINGSoff{
+\def\HEADINGSoff{%
 \global\evenheadline={\hfil} \global\evenfootline={\hfil}
 \global\oddheadline={\hfil} \global\oddfootline={\hfil}}
 \HEADINGSoff
@@ -1904,7 +2112,7 @@ where each line of input produces a line of output.}
 % chapter name on inside top of right hand pages, document
 % title on inside top of left hand pages, and page numbers on outside top
 % edge of all pages.
-\def\HEADINGSdouble{
+\def\HEADINGSdouble{%
 \global\pageno=1
 \global\evenfootline={\hfil}
 \global\oddfootline={\hfil}
@@ -1916,7 +2124,7 @@ where each line of input produces a line of output.}
 
 % For single-sided printing, chapter title goes across top left of page,
 % page number on top right.
-\def\HEADINGSsingle{
+\def\HEADINGSsingle{%
 \global\pageno=1
 \global\evenfootline={\hfil}
 \global\oddfootline={\hfil}
@@ -1963,12 +2171,11 @@ where each line of input produces a line of output.}
 % @settitle line...  specifies the title of the document, for headings.
 % It generates no output of its own.
 \def\thistitle{\putwordNoTitle}
-\def\settitle{\parsearg\settitlezzz}
-\def\settitlezzz #1{\gdef\thistitle{#1}}
+\def\settitle{\parsearg{\gdef\thistitle}}
 
 
 \message{tables,}
-% Tables -- @table, @ftable, @vtable, @item(x), @kitem(x), @xitem(x).
+% Tables -- @table, @ftable, @vtable, @item(x).
 
 % default indentation of table text
 \newdimen\tableindent \tableindent=.8in
@@ -1980,7 +2187,7 @@ where each line of input produces a line of output.}
 % used internally for \itemindent minus \itemmargin
 \newdimen\itemmax
 
-% Note @table, @vtable, and @vtable define @item, @itemx, etc., with
+% Note @table, @ftable, and @vtable define @item, @itemx, etc., with
 % these defs.
 % They also define \itemindex
 % to index the item name in whatever manner is desired (perhaps none).
@@ -1992,22 +2199,10 @@ where each line of input produces a line of output.}
 \def\internalBitem{\smallbreak \parsearg\itemzzz}
 \def\internalBitemx{\itemxpar \parsearg\itemzzz}
 
-\def\internalBxitem "#1"{\def\xitemsubtopix{#1} \smallbreak \parsearg\xitemzzz}
-\def\internalBxitemx "#1"{\def\xitemsubtopix{#1} \itemxpar \parsearg\xitemzzz}
-
-\def\internalBkitem{\smallbreak \parsearg\kitemzzz}
-\def\internalBkitemx{\itemxpar \parsearg\kitemzzz}
-
-\def\kitemzzz #1{\dosubind {kw}{\code{#1}}{for {\bf \lastfunction}}%
-                 \itemzzz {#1}}
-
-\def\xitemzzz #1{\dosubind {kw}{\code{#1}}{for {\bf \xitemsubtopic}}%
-                 \itemzzz {#1}}
-
 \def\itemzzz #1{\begingroup %
   \advance\hsize by -\rightskip
   \advance\hsize by -\tableindent
-  \setbox0=\hbox{\itemfont{#1}}%
+  \setbox0=\hbox{\itemindicate{#1}}%
   \itemindex{#1}%
   \nobreak % This prevents a break before @itemx.
   %
@@ -2061,81 +2256,63 @@ where each line of input produces a line of output.}
   \fi
 }
 
-\def\item{\errmessage{@item while not in a table}}
-\def\itemx{\errmessage{@itemx while not in a table}}
-\def\kitem{\errmessage{@kitem while not in a table}}
-\def\kitemx{\errmessage{@kitemx while not in a table}}
-\def\xitem{\errmessage{@xitem while not in a table}}
-\def\xitemx{\errmessage{@xitemx while not in a table}}
-
-% Contains a kludge to get @end[description] to work.
-\def\description{\tablez{\dontindex}{1}{}{}{}{}}
+\def\item{\errmessage{@item while not in a list environment}}
+\def\itemx{\errmessage{@itemx while not in a list environment}}
 
 % @table, @ftable, @vtable.
-\def\table{\begingroup\inENV\obeylines\obeyspaces\tablex}
-{\obeylines\obeyspaces%
-\gdef\tablex #1^^M{%
-\tabley\dontindex#1        \endtabley}}
-
-\def\ftable{\begingroup\inENV\obeylines\obeyspaces\ftablex}
-{\obeylines\obeyspaces%
-\gdef\ftablex #1^^M{%
-\tabley\fnitemindex#1        \endtabley
-\def\Eftable{\endgraf\afterenvbreak\endgroup}%
-\let\Etable=\relax}}
-
-\def\vtable{\begingroup\inENV\obeylines\obeyspaces\vtablex}
-{\obeylines\obeyspaces%
-\gdef\vtablex #1^^M{%
-\tabley\vritemindex#1        \endtabley
-\def\Evtable{\endgraf\afterenvbreak\endgroup}%
-\let\Etable=\relax}}
-
-\def\dontindex #1{}
-\def\fnitemindex #1{\doind {fn}{\code{#1}}}%
-\def\vritemindex #1{\doind {vr}{\code{#1}}}%
-
-{\obeyspaces %
-\gdef\tabley#1#2 #3 #4 #5 #6 #7\endtabley{\endgroup%
-\tablez{#1}{#2}{#3}{#4}{#5}{#6}}}
-
-\def\tablez #1#2#3#4#5#6{%
-\aboveenvbreak %
-\begingroup %
-\def\Edescription{\Etable}% Necessary kludge.
-\let\itemindex=#1%
-\ifnum 0#3>0 \advance \leftskip by #3\mil \fi %
-\ifnum 0#4>0 \tableindent=#4\mil \fi %
-\ifnum 0#5>0 \advance \rightskip by #5\mil \fi %
-\def\itemfont{#2}%
-\itemmax=\tableindent %
-\advance \itemmax by -\itemmargin %
-\advance \leftskip by \tableindent %
-\exdentamount=\tableindent
-\parindent = 0pt
-\parskip = \smallskipamount
-\ifdim \parskip=0pt \parskip=2pt \fi%
-\def\Etable{\endgraf\afterenvbreak\endgroup}%
-\let\item = \internalBitem %
-\let\itemx = \internalBitemx %
-\let\kitem = \internalBkitem %
-\let\kitemx = \internalBkitemx %
-\let\xitem = \internalBxitem %
-\let\xitemx = \internalBxitemx %
+\envdef\table{%
+  \let\itemindex\gobble
+  \tablex
+}
+\envdef\ftable{%
+  \def\itemindex ##1{\doind {fn}{\code{##1}}}%
+  \tablex
+}
+\envdef\vtable{%
+  \def\itemindex ##1{\doind {vr}{\code{##1}}}%
+  \tablex
+}
+\def\tablex#1{%
+  \def\itemindicate{#1}%
+  \parsearg\tabley
+}
+\def\tabley#1{%
+  {%
+    \makevalueexpandable
+    \edef\temp{\noexpand\tablez #1\space\space\space}%
+    \expandafter
+  }\temp \endtablez
 }
+\def\tablez #1 #2 #3 #4\endtablez{%
+  \aboveenvbreak
+  \ifnum 0#1>0 \advance \leftskip by #1\mil \fi
+  \ifnum 0#2>0 \tableindent=#2\mil \fi
+  \ifnum 0#3>0 \advance \rightskip by #3\mil \fi
+  \itemmax=\tableindent
+  \advance \itemmax by -\itemmargin
+  \advance \leftskip by \tableindent
+  \exdentamount=\tableindent
+  \parindent = 0pt
+  \parskip = \smallskipamount
+  \ifdim \parskip=0pt \parskip=2pt \fi
+  \let\item = \internalBitem
+  \let\itemx = \internalBitemx
+}
+\def\Etable{\endgraf\afterenvbreak}
+\let\Eftable\Etable
+\let\Evtable\Etable
+\let\Eitemize\Etable
+\let\Eenumerate\Etable
 
 % This is the counter used by @enumerate, which is really @itemize
 
 \newcount \itemno
 
-\def\itemize{\parsearg\itemizezzz}
-
-\def\itemizezzz #1{%
-  \begingroup % ended by the @end itemize
-  \itemizey {#1}{\Eitemize}
+\envdef\itemize{%
+  \parsearg\itemizey
 }
 
-\def\itemizey#1#2{%
+\def\itemizey#1{%
   \aboveenvbreak
   \itemmax=\itemindent
   \advance\itemmax by -\itemmargin
@@ -2144,7 +2321,6 @@ where each line of input produces a line of output.}
   \parindent=0pt
   \parskip=\smallskipamount
   \ifdim\parskip=0pt \parskip=2pt \fi
-  \def#2{\endgraf\afterenvbreak\endgroup}%
   \def\itemcontents{#1}%
   % @itemize with no arg is equivalent to @itemize @bullet.
   \ifx\itemcontents\empty\def\itemcontents{\bullet}\fi
@@ -2160,11 +2336,8 @@ where each line of input produces a line of output.}
 % or number, to specify the first label in the enumerated list.  No
 % argument is the same as `1'.
 %
-\def\enumerate{\parsearg\enumeratezzz}
-\def\enumeratezzz #1{\enumeratey #1  \endenumeratey}
+\envparseargdef\enumerate{\enumeratey #1  \endenumeratey}
 \def\enumeratey #1 #2\endenumeratey{%
-  \begingroup % ended by the @end enumerate
-  %
   % If we were given no argument, pretend we were given `1'.
   \def\thearg{#1}%
   \ifx\thearg\empty \def\thearg{1}\fi
@@ -2241,7 +2414,7 @@ where each line of input produces a line of output.}
 %
 \def\startenumeration#1{%
   \advance\itemno by -1
-  \itemizey{#1.}\Eenumerate\flushcr
+  \itemizey{#1.}\flushcr
 }
 
 % @alphaenumerate and @capsenumerate are abbreviations for giving an arg
@@ -2288,24 +2461,14 @@ where each line of input produces a line of output.}
 %   @multitable {Column 1 template} {Column 2 template} {Column 3 template}
 %   @item ...
 %   using the widest term desired in each column.
-%
-% For those who want to use more than one line's worth of words in
-% the preamble, break the line within one argument and it
-% will parse correctly, i.e.,
-%
-%     @multitable {Column 1 template} {Column 2 template} {Column 3
-%      template}
-% Not:
-%     @multitable {Column 1 template} {Column 2 template}
-%      {Column 3 template}
 
 % Each new table line starts with @item, each subsequent new column
 % starts with @tab. Empty columns may be produced by supplying @tab's
 % with nothing between them for as many times as empty columns are needed,
 % ie, @tab@tab@tab will produce two empty columns.
 
-% @item, @tab, @multitable or @end multitable do not need to be on their
-% own lines, but it will not hurt if they are.
+% @item, @tab do not need to be on their own lines, but it will not hurt
+% if they are.
 
 % Sample multitable:
 
@@ -2388,18 +2551,30 @@ where each line of input produces a line of output.}
   \go
 }
 
+% multitable-only commands.
+%
+% @headitem starts a heading row, which we typeset in bold.
+% Assignments have to be global since we are inside the implicit group
+% of an alignment entry.  Note that \everycr resets \everytab.
+\def\headitem{\checkenv\multitable \crcr \global\everytab={\bf}\the\everytab}%
+%
+% A \tab used to include \hskip1sp.  But then the space in a template
+% line is not enough.  That is bad.  So let's go back to just `&' until
+% we encounter the problem it was intended to solve again.
+%					--karl, nathan@acm.org, 20apr99.
+\def\tab{\checkenv\multitable &\the\everytab}%
+
 % @multitable ... @end multitable definitions:
 %
-\def\multitable{\parsearg\dotable}
-\def\dotable#1{\bgroup
+\newtoks\everytab  % insert after every tab.
+%
+\envdef\multitable{%
   \vskip\parskip
-  \let\item=\crcrwithfootnotes
-  % A \tab used to include \hskip1sp.  But then the space in a template
-  % line is not enough.  That is bad.  So let's go back to just & until
-  % we encounter the problem it was intended to solve again.  --karl,
-  % nathan@acm.org, 20apr99.
-  \let\tab=&%
-  \let\startfootins=\startsavedfootnote
+  \startsavinginserts
+  %
+  % @item within a multitable starts a normal row.
+  \let\item\crcr
+  %
   \tolerance=9500
   \hbadness=9500
   \setmultitablespacing
@@ -2407,70 +2582,80 @@ where each line of input produces a line of output.}
   \parindent=\multitableparindent
   \overfullrule=0pt
   \global\colcount=0
-  \def\Emultitable{%
-    \global\setpercentfalse
-    \crcrwithfootnotes\crcr
-    \egroup\egroup
+  %
+  \everycr = {%
+    \noalign{%
+      \global\everytab={}%
+      \global\colcount=0 % Reset the column counter.
+      % Check for saved footnotes, etc.
+      \checkinserts
+      % Keeps underfull box messages off when table breaks over pages.
+      %\filbreak
+	% Maybe so, but it also creates really weird page breaks when the
+	% table breaks over pages. Wouldn't \vfil be better?  Wait until the
+	% problem manifests itself, so it can be fixed for real --karl.
+    }%
   }%
   %
+  \parsearg\domultitable
+}
+\def\domultitable#1{%
   % To parse everything between @multitable and @item:
   \setuptable#1 \endsetuptable
   %
-  % \everycr will reset column counter, \colcount, at the end of
-  % each line. Every column entry will cause \colcount to advance by one.
-  % The table preamble
-  % looks at the current \colcount to find the correct column width.
-  \everycr{\noalign{%
-  %
-  % \filbreak%% keeps underfull box messages off when table breaks over pages.
-  % Maybe so, but it also creates really weird page breaks when the table
-  % breaks over pages. Wouldn't \vfil be better?  Wait until the problem
-  % manifests itself, so it can be fixed for real --karl.
-    \global\colcount=0\relax}}%
-  %
   % This preamble sets up a generic column definition, which will
   % be used as many times as user calls for columns.
   % \vtop will set a single line and will also let text wrap and
   % continue for many paragraphs if desired.
-  \halign\bgroup&\global\advance\colcount by 1\relax
-    \multistrut\vtop{\hsize=\expandafter\csname col\the\colcount\endcsname
-  %
-  % In order to keep entries from bumping into each other
-  % we will add a \leftskip of \multitablecolspace to all columns after
-  % the first one.
-  %
-  % If a template has been used, we will add \multitablecolspace
-  % to the width of each template entry.
-  %
-  % If the user has set preamble in terms of percent of \hsize we will
-  % use that dimension as the width of the column, and the \leftskip
-  % will keep entries from bumping into each other.  Table will start at
-  % left margin and final column will justify at right margin.
-  %
-  % Make sure we don't inherit \rightskip from the outer environment.
-  \rightskip=0pt
-  \ifnum\colcount=1
-    % The first column will be indented with the surrounding text.
-    \advance\hsize by\leftskip
-  \else
-    \ifsetpercent \else
-      % If user has not set preamble in terms of percent of \hsize
-      % we will advance \hsize by \multitablecolspace.
-      \advance\hsize by \multitablecolspace
-    \fi
-   % In either case we will make \leftskip=\multitablecolspace:
-  \leftskip=\multitablecolspace
-  \fi
-  % Ignoring space at the beginning and end avoids an occasional spurious
-  % blank line, when TeX decides to break the line at the space before the
-  % box from the multistrut, so the strut ends up on a line by itself.
-  % For example:
-  % @multitable @columnfractions .11 .89
-  % @item @code{#}
-  % @tab Legal holiday which is valid in major parts of the whole country.
-  % Is automatically provided with highlighting sequences respectively marking
-  % characters.
-  \noindent\ignorespaces##\unskip\multistrut}\cr
+  \halign\bgroup &%
+    \global\advance\colcount by 1
+    \multistrut
+    \vtop{%
+      % Use the current \colcount to find the correct column width:
+      \hsize=\expandafter\csname col\the\colcount\endcsname
+      %
+      % In order to keep entries from bumping into each other
+      % we will add a \leftskip of \multitablecolspace to all columns after
+      % the first one.
+      %
+      % If a template has been used, we will add \multitablecolspace
+      % to the width of each template entry.
+      %
+      % If the user has set preamble in terms of percent of \hsize we will
+      % use that dimension as the width of the column, and the \leftskip
+      % will keep entries from bumping into each other.  Table will start at
+      % left margin and final column will justify at right margin.
+      %
+      % Make sure we don't inherit \rightskip from the outer environment.
+      \rightskip=0pt
+      \ifnum\colcount=1
+	% The first column will be indented with the surrounding text.
+	\advance\hsize by\leftskip
+      \else
+	\ifsetpercent \else
+	  % If user has not set preamble in terms of percent of \hsize
+	  % we will advance \hsize by \multitablecolspace.
+	  \advance\hsize by \multitablecolspace
+	\fi
+       % In either case we will make \leftskip=\multitablecolspace:
+      \leftskip=\multitablecolspace
+      \fi
+      % Ignoring space at the beginning and end avoids an occasional spurious
+      % blank line, when TeX decides to break the line at the space before the
+      % box from the multistrut, so the strut ends up on a line by itself.
+      % For example:
+      % @multitable @columnfractions .11 .89
+      % @item @code{#}
+      % @tab Legal holiday which is valid in major parts of the whole country.
+      % Is automatically provided with highlighting sequences respectively
+      % marking characters.
+      \noindent\ignorespaces##\unskip\multistrut
+    }\cr
+}
+\def\Emultitable{%
+  \crcr
+  \egroup % end the \halign
+  \global\setpercentfalse
 }
 
 \def\setmultitablespacing{% test to see if user has set \multitablelinespace.
@@ -2500,163 +2685,33 @@ width0pt\relax} \fi
                                       %% than skip between lines in the table.
 \fi}
 
-% In case a @footnote appears inside an alignment, save the footnote
-% text to a box and make the \insert when a row of the table is
-% finished.  Otherwise, the insertion is lost, it never migrates to the
-% main vertical list.  --kasal, 22jan03.
-%
-\newbox\savedfootnotes
-%
-% \dotable \let's \startfootins to this, so that \dofootnote will call
-% it instead of starting the insertion right away.
-\def\startsavedfootnote{%
-  \global\setbox\savedfootnotes = \vbox\bgroup
-    \unvbox\savedfootnotes
-}
-\def\crcrwithfootnotes{%
-  \crcr
-  \ifvoid\savedfootnotes \else
-    \noalign{\insert\footins{\box\savedfootnotes}}%
-  \fi
-}
 
 \message{conditionals,}
-% Prevent errors for section commands.
-% Used in @ignore and in failing conditionals.
-\def\ignoresections{%
-  \let\chapter=\relax
-  \let\unnumbered=\relax
-  \let\top=\relax
-  \let\unnumberedsec=\relax
-  \let\unnumberedsection=\relax
-  \let\unnumberedsubsec=\relax
-  \let\unnumberedsubsection=\relax
-  \let\unnumberedsubsubsec=\relax
-  \let\unnumberedsubsubsection=\relax
-  \let\section=\relax
-  \let\subsec=\relax
-  \let\subsubsec=\relax
-  \let\subsection=\relax
-  \let\subsubsection=\relax
-  \let\appendix=\relax
-  \let\appendixsec=\relax
-  \let\appendixsection=\relax
-  \let\appendixsubsec=\relax
-  \let\appendixsubsection=\relax
-  \let\appendixsubsubsec=\relax
-  \let\appendixsubsubsection=\relax
-  \let\contents=\relax
-  \let\smallbook=\relax
-  \let\titlepage=\relax
-}
-
-% Used in nested conditionals, where we have to parse the Texinfo source
-% and so want to turn off most commands, in case they are used
-% incorrectly.
-%
-% We use \empty instead of \relax for the @def... commands, so that \end
-% doesn't throw an error.  For instance:
-% @ignore
-% @deffn ...
-% @end deffn
-% @end ignore
-%
-% The @end deffn is going to get expanded, because we're trying to allow
-% nested conditionals.  But we don't want to expand the actual @deffn,
-% since it might be syntactically correct and intended to be ignored.
-% Since \end checks for \relax, using \empty does not cause an error.
-%
-\def\ignoremorecommands{%
-  \let\defcodeindex = \relax
-  \let\defcv = \empty
-  \let\defcvx = \empty
-  \let\Edefcv = \empty
-  \let\deffn = \empty
-  \let\deffnx = \empty
-  \let\Edeffn = \empty
-  \let\defindex = \relax
-  \let\defivar = \empty
-  \let\defivarx = \empty
-  \let\Edefivar = \empty
-  \let\defmac = \empty
-  \let\defmacx = \empty
-  \let\Edefmac = \empty
-  \let\defmethod = \empty
-  \let\defmethodx = \empty
-  \let\Edefmethod = \empty
-  \let\defop = \empty
-  \let\defopx = \empty
-  \let\Edefop = \empty
-  \let\defopt = \empty
-  \let\defoptx = \empty
-  \let\Edefopt = \empty
-  \let\defspec = \empty
-  \let\defspecx = \empty
-  \let\Edefspec = \empty
-  \let\deftp = \empty
-  \let\deftpx = \empty
-  \let\Edeftp = \empty
-  \let\deftypefn = \empty
-  \let\deftypefnx = \empty
-  \let\Edeftypefn = \empty
-  \let\deftypefun = \empty
-  \let\deftypefunx = \empty
-  \let\Edeftypefun = \empty
-  \let\deftypeivar = \empty
-  \let\deftypeivarx = \empty
-  \let\Edeftypeivar = \empty
-  \let\deftypemethod = \empty
-  \let\deftypemethodx = \empty
-  \let\Edeftypemethod = \empty
-  \let\deftypeop = \empty
-  \let\deftypeopx = \empty
-  \let\Edeftypeop = \empty
-  \let\deftypevar = \empty
-  \let\deftypevarx = \empty
-  \let\Edeftypevar = \empty
-  \let\deftypevr = \empty
-  \let\deftypevrx = \empty
-  \let\Edeftypevr = \empty
-  \let\defun = \empty
-  \let\defunx = \empty
-  \let\Edefun = \empty
-  \let\defvar = \empty
-  \let\defvarx = \empty
-  \let\Edefvar = \empty
-  \let\defvr = \empty
-  \let\defvrx = \empty
-  \let\Edefvr = \empty
-  \let\clear = \relax
-  \let\down = \relax
-  \let\evenfooting = \relax
-  \let\evenheading = \relax
-  \let\everyfooting = \relax
-  \let\everyheading = \relax
-  \let\headings = \relax
-  \let\include = \relax
-  \let\item = \relax
-  \let\lowersections = \relax
-  \let\oddfooting = \relax
-  \let\oddheading = \relax
-  \let\printindex = \relax
-  \let\pxref = \relax
-  \let\raisesections = \relax
-  \let\ref = \relax
-  \let\set = \relax
-  \let\setchapternewpage = \relax
-  \let\setchapterstyle = \relax
-  \let\settitle = \relax
-  \let\up = \relax
-  \let\verbatiminclude = \relax
-  \let\xref = \relax
+
+% @iftex, @ifnotdocbook, @ifnothtml, @ifnotinfo, @ifnotplaintext,
+% @ifnotxml always succeed.  They currently do nothing; we don't
+% attempt to check whether the conditionals are properly nested.  But we
+% have to remember that they are conditionals, so that @end doesn't
+% attempt to close an environment group.
+%
+\def\makecond#1{%
+  \expandafter\let\csname #1\endcsname = \relax
+  \expandafter\let\csname iscond.#1\endcsname = 1
 }
+\makecond{iftex}
+\makecond{ifnotdocbook}
+\makecond{ifnothtml}
+\makecond{ifnotinfo}
+\makecond{ifnotplaintext}
+\makecond{ifnotxml}
 
 % Ignore @ignore, @ifhtml, @ifinfo, and the like.
 %
 \def\direntry{\doignore{direntry}}
-\def\documentdescriptionword{documentdescription}
 \def\documentdescription{\doignore{documentdescription}}
+\def\docbook{\doignore{docbook}}
 \def\html{\doignore{html}}
+\def\ifdocbook{\doignore{ifdocbook}}
 \def\ifhtml{\doignore{ifhtml}}
 \def\ifinfo{\doignore{ifinfo}}
 \def\ifnottex{\doignore{ifnottex}}
@@ -2666,198 +2721,133 @@ width0pt\relax} \fi
 \def\menu{\doignore{menu}}
 \def\xml{\doignore{xml}}
 
-% @dircategory CATEGORY  -- specify a category of the dir file
-% which this file should belong to.  Ignore this in TeX.
-\let\dircategory = \comment
-
-% Ignore text until a line `@end #1'.
+% Ignore text until a line `@end #1', keeping track of nested conditionals.
 %
+% A count to remember the depth of nesting.
+\newcount\doignorecount
+
 \def\doignore#1{\begingroup
-  % Don't complain about control sequences we have declared \outer.
-  \ignoresections
-  %
-  % Define a command to swallow text until we reach `@end #1'.
-  % This @ is a catcode 12 token (that is the normal catcode of @ in
-  % this texinfo.tex file).  We change the catcode of @ below to match.
-  \long\def\doignoretext##1@end #1{\enddoignore}%
+  % Scan in ``verbatim'' mode:
+  \catcode`\@ = \other
+  \catcode`\{ = \other
+  \catcode`\} = \other
   %
   % Make sure that spaces turn into tokens that match what \doignoretext wants.
-  \catcode\spaceChar = 10
-  %
-  % Ignore braces, too, so mismatched braces don't cause trouble.
-  \catcode`\{ = 9
-  \catcode`\} = 9
+  \spaceisspace
   %
-  % We must not have @c interpreted as a control sequence.
-  \catcode`\@ = 12
-  %
-  \def\ignoreword{#1}%
-  \ifx\ignoreword\documentdescriptionword
-    % The c kludge breaks documentdescription, since
-    % `documentdescription' contains a `c'.  Means not everything will
-    % be ignored inside @documentdescription, but oh well...
-  \else
-    % Make the letter c a comment character so that the rest of the line
-    % will be ignored. This way, the document can have (for example)
-    %   @c @end ifinfo
-    % and the @end ifinfo will be properly ignored.
-    % (We've just changed @ to catcode 12.)
-    \catcode`\c = 14
-  \fi
+  % Count number of #1's that we've seen.
+  \doignorecount = 0
   %
-  % And now expand the command defined above.
-  \doignoretext
-}
-
-% What we do to finish off ignored text.
-%
-\def\enddoignore{\endgroup\ignorespaces}%
-
-\newif\ifwarnedobs\warnedobsfalse
-\def\obstexwarn{%
-  \ifwarnedobs\relax\else
-  % We need to warn folks that they may have trouble with TeX 3.0.
-  % This uses \immediate\write16 rather than \message to get newlines.
-    \immediate\write16{}
-    \immediate\write16{WARNING: for users of Unix TeX 3.0!}
-    \immediate\write16{This manual trips a bug in TeX version 3.0 (tex hangs).}
-    \immediate\write16{If you are running another version of TeX, relax.}
-    \immediate\write16{If you are running Unix TeX 3.0, kill this TeX process.}
-    \immediate\write16{  Then upgrade your TeX installation if you can.}
-    \immediate\write16{  (See ftp://ftp.gnu.org/non-gnu/TeX.README.)}
-    \immediate\write16{If you are stuck with version 3.0, run the}
-    \immediate\write16{  script ``tex3patch'' from the Texinfo distribution}
-    \immediate\write16{  to use a workaround.}
-    \immediate\write16{}
-    \global\warnedobstrue
-    \fi
+  % Swallow text until we reach the matching `@end #1'.
+  \dodoignore {#1}%
 }
 
-% **In TeX 3.0, setting text in \nullfont hangs tex.  For a
-% workaround (which requires the file ``dummy.tfm'' to be installed),
-% uncomment the following line:
-%%%%%\font\nullfont=dummy\let\obstexwarn=\relax
-
-% Ignore text, except that we keep track of conditional commands for
-% purposes of nesting, up to an `@end #1' command.
-%
-\def\nestedignore#1{%
-  \obstexwarn
-  % We must actually expand the ignored text to look for the @end
-  % command, so that nested ignore constructs work.  Thus, we put the
-  % text into a \vbox and then do nothing with the result.  To minimize
-  % the chance of memory overflow, we follow the approach outlined on
-  % page 401 of the TeXbook.
+{ \catcode`_=11 % We want to use \_STOP_ which cannot appear in texinfo source.
+  \obeylines %
   %
-  \setbox0 = \vbox\bgroup
-    % Don't complain about control sequences we have declared \outer.
-    \ignoresections
-    %
-    % Define `@end #1' to end the box, which will in turn undefine the
-    % @end command again.
-    \expandafter\def\csname E#1\endcsname{\egroup\ignorespaces}%
-    %
-    % We are going to be parsing Texinfo commands.  Most cause no
-    % trouble when they are used incorrectly, but some commands do
-    % complicated argument parsing or otherwise get confused, so we
-    % undefine them.
-    %
-    % We can't do anything about stray @-signs, unfortunately;
-    % they'll produce `undefined control sequence' errors.
-    \ignoremorecommands
-    %
-    % Set the current font to be \nullfont, a TeX primitive, and define
-    % all the font commands to also use \nullfont.  We don't use
-    % dummy.tfm, as suggested in the TeXbook, because some sites
-    % might not have that installed.  Therefore, math mode will still
-    % produce output, but that should be an extremely small amount of
-    % stuff compared to the main input.
+  \gdef\dodoignore#1{%
+    % #1 contains the string `ifinfo'.
     %
-    \nullfont
-    \let\tenrm=\nullfont \let\tenit=\nullfont \let\tensl=\nullfont
-    \let\tenbf=\nullfont \let\tentt=\nullfont \let\smallcaps=\nullfont
-    \let\tensf=\nullfont
-    % Similarly for index fonts.
-    \let\smallrm=\nullfont \let\smallit=\nullfont \let\smallsl=\nullfont
-    \let\smallbf=\nullfont \let\smalltt=\nullfont \let\smallsc=\nullfont
-    \let\smallsf=\nullfont
-    % Similarly for smallexample fonts.
-    \let\smallerrm=\nullfont \let\smallerit=\nullfont \let\smallersl=\nullfont
-    \let\smallerbf=\nullfont \let\smallertt=\nullfont \let\smallersc=\nullfont
-    \let\smallersf=\nullfont
+    % Define a command to find the next `@end #1', which must be on a line
+    % by itself.
+    \long\def\doignoretext##1^^M@end #1{\doignoretextyyy##1^^M@#1\_STOP_}%
+    % And this command to find another #1 command, at the beginning of a
+    % line.  (Otherwise, we would consider a line `@c @ifset', for
+    % example, to count as an @ifset for nesting.)
+    \long\def\doignoretextyyy##1^^M@#1##2\_STOP_{\doignoreyyy{##2}\_STOP_}%
     %
-    % Don't complain when characters are missing from the fonts.
-    \tracinglostchars = 0
-    %
-    % Don't bother to do space factor calculations.
-    \frenchspacing
-    %
-    % Don't report underfull hboxes.
-    \hbadness = 10000
-    %
-    % Do minimal line-breaking.
-    \pretolerance = 10000
-    %
-    % Do not execute instructions in @tex.
-    \def\tex{\doignore{tex}}%
-    % Do not execute macro definitions.
-    % `c' is a comment character, so the word `macro' will get cut off.
-    \def\macro{\doignore{ma}}%
+    % And now expand that command.
+    \obeylines %
+    \doignoretext ^^M%
+  }%
 }
 
+\def\doignoreyyy#1{%
+  \def\temp{#1}%
+  \ifx\temp\empty			% Nothing found.
+    \let\next\doignoretextzzz
+  \else					% Found a nested condition, ...
+    \advance\doignorecount by 1
+    \let\next\doignoretextyyy		% ..., look for another.
+    % If we're here, #1 ends with ^^M\ifinfo (for example).
+  \fi
+  \next #1% the token \_STOP_ is present just after this macro.
+}
+
+% We have to swallow the remaining "\_STOP_".
+% 
+\def\doignoretextzzz#1{%
+  \ifnum\doignorecount = 0	% We have just found the outermost @end.
+    \let\next\enddoignore
+  \else				% Still inside a nested condition.
+    \advance\doignorecount by -1
+    \let\next\doignoretext      % Look for the next @end.
+  \fi
+  \next
+}
+
+% Finish off ignored text.
+\def\enddoignore{\endgroup\ignorespaces}
+
+
 % @set VAR sets the variable VAR to an empty value.
 % @set VAR REST-OF-LINE sets VAR to the value REST-OF-LINE.
 %
 % Since we want to separate VAR from REST-OF-LINE (which might be
 % empty), we can't just use \parsearg; we have to insert a space of our
 % own to delimit the rest of the line, and then take it out again if we
-% didn't need it.  Make sure the catcode of space is correct to avoid
-% losing inside @example, for instance.
+% didn't need it.
+% We rely on the fact that \parsearg sets \catcode`\ =10.
 %
-\def\set{\begingroup\catcode` =10
-  \catcode`\-=12 \catcode`\_=12 % Allow - and _ in VAR.
-  \parsearg\setxxx}
-\def\setxxx#1{\setyyy#1 \endsetyyy}
+\parseargdef\set{\setyyy#1 \endsetyyy}
 \def\setyyy#1 #2\endsetyyy{%
-  \def\temp{#2}%
-  \ifx\temp\empty \global\expandafter\let\csname SET#1\endcsname = \empty
-  \else \setzzz{#1}#2\endsetzzz % Remove the trailing space \setxxx inserted.
-  \fi
-  \endgroup
+  {%
+    \makevalueexpandable
+    \def\temp{#2}%
+    \edef\next{\gdef\makecsname{SET#1}}%
+    \ifx\temp\empty
+      \next{}%
+    \else
+      \setzzz#2\endsetzzz
+    \fi
+  }%
 }
-% Can't use \xdef to pre-expand #2 and save some time, since \temp or
-% \next or other control sequences that we've defined might get us into
-% an infinite loop. Consider `@set foo @cite{bar}'.
-\def\setzzz#1#2 \endsetzzz{\expandafter\gdef\csname SET#1\endcsname{#2}}
+% Remove the trailing space \setxxx inserted.
+\def\setzzz#1 \endsetzzz{\next{#1}}
 
 % @clear VAR clears (i.e., unsets) the variable VAR.
 %
-\def\clear{\parsearg\clearxxx}
-\def\clearxxx#1{\global\expandafter\let\csname SET#1\endcsname=\relax}
+\parseargdef\clear{%
+  {%
+    \makevalueexpandable
+    \global\expandafter\let\csname SET#1\endcsname=\relax
+  }%
+}
 
 % @value{foo} gets the text saved in variable foo.
+\def\value{\begingroup\makevalueexpandable\valuexxx}
+\def\valuexxx#1{\expandablevalue{#1}\endgroup}
 {
-  \catcode`\_ = \active
+  \catcode`\- = \active \catcode`\_ = \active
   %
-  % We might end up with active _ or - characters in the argument if
-  % we're called from @code, as @code{@value{foo-bar_}}.  So \let any
-  % such active characters to their normal equivalents.
-  \gdef\value{\begingroup
+  \gdef\makevalueexpandable{%
+    \let\value = \expandablevalue
+    % We don't want these characters active, ...
     \catcode`\-=\other \catcode`\_=\other
-    \indexbreaks \let_\normalunderscore
-    \valuexxx}
+    % ..., but we might end up with active ones in the argument if
+    % we're called from @code, as @code{@value{foo-bar_}}, though.
+    % So \let them to their normal equivalents.
+    \let-\realdash \let_\normalunderscore
+  }
 }
-\def\valuexxx#1{\expandablevalue{#1}\endgroup}
 
 % We have this subroutine so that we can handle at least some @value's
-% properly in indexes (we \let\value to this in \indexdummies).  Ones
-% whose names contain - or _ still won't work, but we can't do anything
-% about that.  The command has to be fully expandable (if the variable
-% is set), since the result winds up in the index file.  This means that
-% if the variable's value contains other Texinfo commands, it's almost
-% certain it will fail (although perhaps we could fix that with
-% sufficient work to do a one-level expansion on the result, instead of
-% complete).
+% properly in indexes (we call \makevalueexpandable in \indexdummies).
+% The command has to be fully expandable (if the variable is set), since
+% the result winds up in the index file.  This means that if the
+% variable's value contains other Texinfo commands, it's almost certain
+% it will fail (although perhaps we could fix that with sufficient work
+% to do a one-level expansion on the result, instead of complete).
 %
 \def\expandablevalue#1{%
   \expandafter\ifx\csname SET#1\endcsname\relax
@@ -2871,55 +2861,36 @@ width0pt\relax} \fi
 % @ifset VAR ... @end ifset reads the `...' iff VAR has been defined
 % with @set.
 %
-\def\ifset{\parsearg\doifset}
-\def\doifset#1{%
-  \expandafter\ifx\csname SET#1\endcsname\relax
-    \let\next=\ifsetfail
-  \else
-    \let\next=\ifsetsucceed
-  \fi
-  \next
+% To get special treatment of `@end ifset,' call \makeond and the redefine.
+%
+\makecond{ifset}
+\def\ifset{\parsearg{\doifset{\let\next=\ifsetfail}}}
+\def\doifset#1#2{%
+  {%
+    \makevalueexpandable
+    \let\next=\empty
+    \expandafter\ifx\csname SET#2\endcsname\relax
+      #1% If not set, redefine \next.
+    \fi
+    \expandafter
+  }\next
 }
-\def\ifsetsucceed{\conditionalsucceed{ifset}}
-\def\ifsetfail{\nestedignore{ifset}}
-\defineunmatchedend{ifset}
+\def\ifsetfail{\doignore{ifset}}
 
 % @ifclear VAR ... @end ifclear reads the `...' iff VAR has never been
 % defined with @set, or has been undefined with @clear.
 %
-\def\ifclear{\parsearg\doifclear}
-\def\doifclear#1{%
-  \expandafter\ifx\csname SET#1\endcsname\relax
-    \let\next=\ifclearsucceed
-  \else
-    \let\next=\ifclearfail
-  \fi
-  \next
-}
-\def\ifclearsucceed{\conditionalsucceed{ifclear}}
-\def\ifclearfail{\nestedignore{ifclear}}
-\defineunmatchedend{ifclear}
-
-% @iftex, @ifnothtml, @ifnotinfo, @ifnotplaintext always succeed; we
-% read the text following, through the first @end iftex (etc.).  Make
-% `@end iftex' (etc.) valid only after an @iftex.
+% The `\else' inside the `\doifset' parameter is a trick to reuse the
+% above code: if the variable is not set, do nothing, if it is set,
+% then redefine \next to \ifclearfail.
 %
-\def\iftex{\conditionalsucceed{iftex}}
-\def\ifnothtml{\conditionalsucceed{ifnothtml}}
-\def\ifnotinfo{\conditionalsucceed{ifnotinfo}}
-\def\ifnotplaintext{\conditionalsucceed{ifnotplaintext}}
-\defineunmatchedend{iftex}
-\defineunmatchedend{ifnothtml}
-\defineunmatchedend{ifnotinfo}
-\defineunmatchedend{ifnotplaintext}
+\makecond{ifclear}
+\def\ifclear{\parsearg{\doifset{\else \let\next=\ifclearfail}}}
+\def\ifclearfail{\doignore{ifclear}}
 
-% True conditional.  Since \set globally defines its variables, we can
-% just start and end a group (to keep the @end definition undefined at
-% the outer level).
-%
-\def\conditionalsucceed#1{\begingroup
-  \expandafter\def\csname E#1\endcsname{\endgroup}%
-}
+% @dircategory CATEGORY  -- specify a category of the dir file
+% which this file should belong to.  Ignore this in TeX.
+\let\dircategory=\comment
 
 % @defininfoenclose.
 \let\definfoenclose=\comment
@@ -3109,6 +3080,10 @@ width0pt\relax} \fi
   \definedummyword{oe}%
   \definedummyword{o}%
   \definedummyword{ss}%
+  \definedummyword{exclamdown}%
+  \definedummyword{questiondown}%
+  \definedummyword{ordm}%
+  \definedummyword{ordf}%
   %
   % Although these internal commands shouldn't show up, sometimes they do.
   \definedummyword{bf}%
@@ -3127,6 +3102,7 @@ width0pt\relax} \fi
   \definedummyword{sc}%
   \definedummyword{t}%
   %
+  \definedummyword{LaTeX}%
   \definedummyword{TeX}%
   \definedummyword{acronym}%
   \definedummyword{cite}%
@@ -3146,11 +3122,13 @@ width0pt\relax} \fi
   \definedummyword{uref}%
   \definedummyword{url}%
   \definedummyword{var}%
+  \definedummyword{verb}%
   \definedummyword{w}%
   %
   % Assorted special characters.
   \definedummyword{bullet}%
   \definedummyword{copyright}%
+  \definedummyword{registeredsymbol}%
   \definedummyword{dots}%
   \definedummyword{enddots}%
   \definedummyword{equiv}%
@@ -3162,10 +3140,9 @@ width0pt\relax} \fi
   \definedummyword{print}%
   \definedummyword{result}%
   %
-  % Handle some cases of @value -- where the variable name does not
-  % contain - or _, and the value does not contain any
+  % Handle some cases of @value -- where it does not contain any
   % (non-fully-expandable) commands.
-  \let\value = \expandablevalue
+  \makevalueexpandable
   %
   % Normal spaces, not active ones.
   \unsepspaces
@@ -3174,18 +3151,13 @@ width0pt\relax} \fi
   \turnoffmacros
 }
 
-% If an index command is used in an @example environment, any spaces
-% therein should become regular spaces in the raw index file, not the
-% expansion of \tie (\leavevmode \penalty \@M \ ).
-{\obeyspaces
- \gdef\unsepspaces{\obeyspaces\let =\space}}
-
 
 % \indexnofonts is used when outputting the strings to sort the index
 % by, and when constructing control sequence names.  It eliminates all
 % control sequences and just writes whatever the best ASCII sort string
 % would be for a given command (usually its argument).
 %
+\def\indexdummylatex{LaTeX}
 \def\indexdummytex{TeX}
 \def\indexdummydots{...}
 %
@@ -3226,6 +3198,8 @@ width0pt\relax} \fi
   \def\ss{ss}%
   \def\exclamdown{!}%
   \def\questiondown{?}%
+  \def\ordf{a}%
+  \def\ordm{o}%
   %
   % Don't no-op \tt, since it isn't a user-level command
   % and is used in the definitions of the active chars like <, >, |, etc.
@@ -3239,6 +3213,7 @@ width0pt\relax} \fi
   \let\sc=\asis
   \let\t=\asis
   %
+  \let\LaTeX=\indexdummylatex
   \let\TeX=\indexdummytex
   \let\acronym=\asis
   \let\cite=\asis
@@ -3258,98 +3233,145 @@ width0pt\relax} \fi
   \let\uref=\asis
   \let\url=\asis
   \let\var=\asis
+  \let\verb=\asis
   \let\w=\asis
 }
 
 \let\indexbackslash=0  %overridden during \printindex.
 \let\SETmarginindex=\relax % put index entries in margin (undocumented)?
 
-% For \ifx comparisons.
-\def\emptymacro{\empty}
-
 % Most index entries go through here, but \dosubind is the general case.
-%
-\def\doind#1#2{\dosubind{#1}{#2}\empty}
+% #1 is the index name, #2 is the entry text.
+\def\doind#1#2{\dosubind{#1}{#2}{}}
 
 % Workhorse for all \fooindexes.
 % #1 is name of index, #2 is stuff to put there, #3 is subentry --
-% \empty if called from \doind, as we usually are.  The main exception
-% is with defuns, which call us directly.
+% empty if called from \doind, as we usually are (the main exception
+% is with most defuns, which call us directly).
 %
 \def\dosubind#1#2#3{%
+  \iflinks
+  {%
+    % Store the main index entry text (including the third arg).
+    \toks0 = {#2}%
+    % If third arg is present, precede it with a space.
+    \def\thirdarg{#3}%
+    \ifx\thirdarg\empty \else
+      \toks0 = \expandafter{\the\toks0 \space #3}%
+    \fi
+    %
+    \edef\writeto{\csname#1indfile\endcsname}%
+    %
+    \ifvmode
+      \dosubindsanitize
+    \else
+      \dosubindwrite
+    \fi
+  }%
+  \fi
+}
+
+% Write the entry in \toks0 to the index file:
+%
+\def\dosubindwrite{%
   % Put the index entry in the margin if desired.
   \ifx\SETmarginindex\relax\else
-    \insert\margin{\hbox{\vrule height8pt depth3pt width0pt #2}}%
+    \insert\margin{\hbox{\vrule height8pt depth3pt width0pt \the\toks0}}%
   \fi
-  {%
-    \count255=\lastpenalty
-    {%
-      \indexdummies % Must do this here, since \bf, etc expand at this stage
-      \escapechar=`\\
-      {%
-        \let\folio = 0% We will expand all macros now EXCEPT \folio.
-        \def\rawbackslashxx{\indexbackslash}% \indexbackslash isn't defined now
-        % so it will be output as is; and it will print as backslash.
-        %
-        % The main index entry text.
-        \toks0 = {#2}%
-        %
-        % If third arg is present, precede it with space in sort key.
-        \def\thirdarg{#3}%
-        \ifx\thirdarg\emptymacro \else
-           % If the third (subentry) arg is present, add it to the index
-           % line to write.
-          \toks0 = \expandafter{\the\toks0 \space #3}%
-        \fi
-        %
-        % Process the index entry with all font commands turned off, to
-        % get the string to sort by.
-        {\indexnofonts
-         \edef\temp{\the\toks0}% need full expansion
-         \xdef\indexsorttmp{\temp}%
-        }%
-        %
-        % Set up the complete index entry, with both the sort key and
-        % the original text, including any font commands.  We write
-        % three arguments to \entry to the .?? file (four in the
-        % subentry case), texindex reduces to two when writing the .??s
-        % sorted result.
-        \edef\temp{%
-          \write\csname#1indfile\endcsname{%
-            \realbackslash entry{\indexsorttmp}{\folio}{\the\toks0}}%
-        }%
-        %
-        % If a skip is the last thing on the list now, preserve it
-        % by backing up by \lastskip, doing the \write, then inserting
-        % the skip again.  Otherwise, the whatsit generated by the
-        % \write will make \lastskip zero.  The result is that sequences
-        % like this:
-        % @end defun
-        % @tindex whatever
-        % @defun ...
-        % will have extra space inserted, because the \medbreak in the
-        % start of the @defun won't see the skip inserted by the @end of
-        % the previous defun.
-        %
-        % But don't do any of this if we're not in vertical mode.  We
-        % don't want to do a \vskip and prematurely end a paragraph.
-        %
-        % Avoid page breaks due to these extra skips, too.
-        %
-        \iflinks
-          \ifvmode
-            \skip0 = \lastskip
-            \ifdim\lastskip = 0pt \else \nobreak\vskip-\skip0 \fi
-          \fi
-          %
-          \temp % do the write
-          %
-          \ifvmode \ifdim\skip0 = 0pt \else \nobreak\vskip\skip0 \fi \fi
-        \fi
-      }%
-    }%
-    \penalty\count255
+  %
+  % Remember, we are within a group.
+  \indexdummies % Must do this here, since \bf, etc expand at this stage
+  \escapechar=`\\
+  \def\rawbackslashxx{\indexbackslash}% \indexbackslash isn't defined now
+      % so it will be output as is; and it will print as backslash.
+  %
+  % Process the index entry with all font commands turned off, to
+  % get the string to sort by.
+  {\indexnofonts
+   \edef\temp{\the\toks0}% need full expansion
+   \xdef\indexsorttmp{\temp}%
+  }%
+  %
+  % Set up the complete index entry, with both the sort key and
+  % the original text, including any font commands.  We write
+  % three arguments to \entry to the .?? file (four in the
+  % subentry case), texindex reduces to two when writing the .??s
+  % sorted result.
+  \edef\temp{%
+    \write\writeto{%
+      \string\entry{\indexsorttmp}{\noexpand\folio}{\the\toks0}}%
   }%
+  \temp
+}
+
+% Take care of unwanted page breaks:
+%
+% If a skip is the last thing on the list now, preserve it
+% by backing up by \lastskip, doing the \write, then inserting
+% the skip again.  Otherwise, the whatsit generated by the
+% \write will make \lastskip zero.  The result is that sequences
+% like this:
+% @end defun
+% @tindex whatever
+% @defun ...
+% will have extra space inserted, because the \medbreak in the
+% start of the @defun won't see the skip inserted by the @end of
+% the previous defun.
+%
+% But don't do any of this if we're not in vertical mode.  We
+% don't want to do a \vskip and prematurely end a paragraph.
+%
+% Avoid page breaks due to these extra skips, too.
+%
+% But wait, there is a catch there:
+% We'll have to check whether \lastskip is zero skip.  \ifdim is not
+% sufficient for this purpose, as it ignores stretch and shrink parts
+% of the skip.  The only way seems to be to check the textual
+% representation of the skip.
+%
+% The following is almost like \def\zeroskipmacro{0.0pt} except that
+% the ``p'' and ``t'' characters have catcode \other, not 11 (letter).
+%
+\edef\zeroskipmacro{\expandafter\the\csname z@skip\endcsname}
+%
+% ..., ready, GO:
+%
+\def\dosubindsanitize{%
+  % \lastskip and \lastpenalty cannot both be nonzero simultaneously.
+  \skip0 = \lastskip
+  \edef\lastskipmacro{\the\lastskip}%
+  \count255 = \lastpenalty
+  %
+  % If \lastskip is nonzero, that means the last item was a
+  % skip.  And since a skip is discardable, that means this
+  % -\skip0 glue we're inserting is preceded by a
+  % non-discardable item, therefore it is not a potential
+  % breakpoint, therefore no \nobreak needed.
+  \ifx\lastskipmacro\zeroskipmacro
+  \else
+    \vskip-\skip0
+  \fi
+  %
+  \dosubindwrite
+  %
+  \ifx\lastskipmacro\zeroskipmacro
+    % if \lastskip was zero, perhaps the last item was a
+    % penalty, and perhaps it was >=10000, e.g., a \nobreak.
+    % In that case, we want to re-insert the penalty; since we
+    % just inserted a non-discardable item, any following glue
+    % (such as a \parskip) would be a breakpoint.  For example:
+    %   @deffn deffn-whatever
+    %   @vindex index-whatever
+    %   Description.
+    % would allow a break between the index-whatever whatsit
+    % and the "Description." paragraph.
+    \ifnum\count255>9999 \nobreak \fi
+  \else
+    % On the other hand, if we had a nonzero \lastskip,
+    % this make-up glue would be preceded by a non-discardable item
+    % (the whatsit from the \write), so we must insert a \nobreak.
+    \nobreak\vskip\skip0
+  \fi
 }
 
 % The index entry written in the file actually looks like
@@ -3387,14 +3409,12 @@ width0pt\relax} \fi
 % @printindex causes a particular index (the ??s file) to get printed.
 % It does not print any chapter heading (usually an @unnumbered).
 %
-\def\printindex{\parsearg\doprintindex}
-\def\doprintindex#1{\begingroup
+\parseargdef\printindex{\begingroup
   \dobreak \chapheadingskip{10000}%
   %
   \smallfonts \rm
   \tolerance = 9500
   \everypar = {}% don't want the \kern\-parindent from indentation suppression.
-  \indexbreaks
   %
   % See if the index file exists and is nonempty.
   % Change catcode of @ here so that if the index file contains
@@ -3459,74 +3479,94 @@ width0pt\relax} \fi
   \nobreak
 }}
 
-% This typesets a paragraph consisting of #1, dot leaders, and then #2
-% flush to the right margin.  It is used for index and table of contents
-% entries.  The paragraph is indented by \leftskip.
-%
-\def\entry#1#2{\begingroup
-  %
-  % Start a new paragraph if necessary, so our assignments below can't
-  % affect previous text.
-  \par
-  %
-  % Do not fill out the last line with white space.
-  \parfillskip = 0in
-  %
-  % No extra space above this paragraph.
-  \parskip = 0in
-  %
-  % Do not prefer a separate line ending with a hyphen to fewer lines.
-  \finalhyphendemerits = 0
-  %
-  % \hangindent is only relevant when the entry text and page number
-  % don't both fit on one line.  In that case, bob suggests starting the
-  % dots pretty far over on the line.  Unfortunately, a large
-  % indentation looks wrong when the entry text itself is broken across
-  % lines.  So we use a small indentation and put up with long leaders.
-  %
-  % \hangafter is reset to 1 (which is the value we want) at the start
-  % of each paragraph, so we need not do anything with that.
-  \hangindent = 2em
-  %
-  % When the entry text needs to be broken, just fill out the first line
-  % with blank space.
-  \rightskip = 0pt plus1fil
-  %
-  % A bit of stretch before each entry for the benefit of balancing columns.
-  \vskip 0pt plus1pt
-  %
-  % Start a ``paragraph'' for the index entry so the line breaking
-  % parameters we've set above will have an effect.
-  \noindent
-  %
-  % Insert the text of the index entry.  TeX will do line-breaking on it.
-  #1%
-  % The following is kludged to not output a line of dots in the index if
-  % there are no page numbers.  The next person who breaks this will be
-  % cursed by a Unix daemon.
-  \def\tempa{{\rm }}%
-  \def\tempb{#2}%
-  \edef\tempc{\tempa}%
-  \edef\tempd{\tempb}%
-  \ifx\tempc\tempd\ \else%
+% \entry typesets a paragraph consisting of the text (#1), dot leaders, and
+% then page number (#2) flushed to the right margin.  It is used for index
+% and table of contents entries.  The paragraph is indented by \leftskip.
+%
+% A straigtforward implementation would start like this:
+%	\def\entry#1#2{...
+% But this frozes the catcodes in the argument, and can cause problems to
+% @code, which set's active ``-''.  This problem was fixed by a kludge---
+% ``-'' was active throughout whole index, but this isn't what we really
+% want.
+% The right solution is to prevent \entry from swallowing the whole text.
+%                                 --kasal, 21nov03
+\def\entry{%
+  \begingroup
+    %
+    % Start a new paragraph if necessary, so our assignments below can't
+    % affect previous text.
+    \par
+    %
+    % Do not fill out the last line with white space.
+    \parfillskip = 0in
+    %
+    % No extra space above this paragraph.
+    \parskip = 0in
+    %
+    % Do not prefer a separate line ending with a hyphen to fewer lines.
+    \finalhyphendemerits = 0
     %
-    % If we must, put the page number on a line of its own, and fill out
-    % this line with blank space.  (The \hfil is overwhelmed with the
-    % fill leaders glue in \indexdotfill if the page number does fit.)
-    \hfil\penalty50
-    \null\nobreak\indexdotfill % Have leaders before the page number.
+    % \hangindent is only relevant when the entry text and page number
+    % don't both fit on one line.  In that case, bob suggests starting the
+    % dots pretty far over on the line.  Unfortunately, a large
+    % indentation looks wrong when the entry text itself is broken across
+    % lines.  So we use a small indentation and put up with long leaders.
     %
-    % The `\ ' here is removed by the implicit \unskip that TeX does as
-    % part of (the primitive) \par.  Without it, a spurious underfull
-    % \hbox ensues.
-    \ifpdf
-      \pdfgettoks#2.\ \the\toksA % The page number ends the paragraph.
+    % \hangafter is reset to 1 (which is the value we want) at the start
+    % of each paragraph, so we need not do anything with that.
+    \hangindent = 2em
+    %
+    % When the entry text needs to be broken, just fill out the first line
+    % with blank space.
+    \rightskip = 0pt plus1fil
+    %
+    % A bit of stretch before each entry for the benefit of balancing
+    % columns.
+    \vskip 0pt plus1pt
+    %
+    % Swallow the left brace of the text (first parameter):
+    \afterassignment\doentry
+    \let\temp =
+}
+\def\doentry{%
+    \bgroup % Instead of the swallowed brace.
+      \noindent
+      \aftergroup\finishentry
+      % And now comes the text of the entry.
+}
+\def\finishentry#1{%
+    % #1 is the page number.
+    %
+    % The following is kludged to not output a line of dots in the index if
+    % there are no page numbers.  The next person who breaks this will be
+    % cursed by a Unix daemon.
+    \def\tempa{{\rm }}%
+    \def\tempb{#1}%
+    \edef\tempc{\tempa}%
+    \edef\tempd{\tempb}%
+    \ifx\tempc\tempd
+      \ %
     \else
-      \ #2% The page number ends the paragraph.
+      %
+      % If we must, put the page number on a line of its own, and fill out
+      % this line with blank space.  (The \hfil is overwhelmed with the
+      % fill leaders glue in \indexdotfill if the page number does fit.)
+      \hfil\penalty50
+      \null\nobreak\indexdotfill % Have leaders before the page number.
+      %
+      % The `\ ' here is removed by the implicit \unskip that TeX does as
+      % part of (the primitive) \par.  Without it, a spurious underfull
+      % \hbox ensues.
+      \ifpdf
+	\pdfgettoks#1.\ \the\toksA
+      \else
+	\ #1%
+      \fi
     \fi
-  \fi%
-  \par
-\endgroup}
+    \par
+  \endgroup
+}
 
 % Like \dotfill except takes at least 1 em.
 \def\indexdotfill{\cleaders
@@ -3695,6 +3735,12 @@ width0pt\relax} \fi
 \message{sectioning,}
 % Chapters, sections, etc.
 
+% \unnumberedno is an oxymoron, of course.  But we count the unnumbered
+% sections so that we can refer to them unambiguously in the pdf
+% outlines by their "section number".  We avoid collisions with chapter
+% numbers by starting them at 10000.  (If a document ever has 10000
+% chapters, we're in trouble anyway, I'm sure.)
+\newcount\unnumberedno \unnumberedno = 10000
 \newcount\chapno
 \newcount\secno        \secno=0
 \newcount\subsecno     \subsecno=0
@@ -3702,9 +3748,12 @@ width0pt\relax} \fi
 
 % This counter is funny since it counts through charcodes of letters A, B, ...
 \newcount\appendixno  \appendixno = `\@
+%
 % \def\appendixletter{\char\the\appendixno}
-% We do the following for the sake of pdftex, which needs the actual
+% We do the following ugly conditional instead of the above simple
+% construct for the sake of pdftex, which needs the actual
 % letter in the expansion, not just typeset.
+% 
 \def\appendixletter{%
   \ifnum\appendixno=`A A%
   \else\ifnum\appendixno=`B B%
@@ -3742,11 +3791,12 @@ width0pt\relax} \fi
 
 % Each @chapter defines this as the name of the chapter.
 % page headings and footings can use it.  @section does likewise.
+% However, they are not reliable, because we don't use marks.
 \def\thischapter{}
 \def\thissection{}
 
 \newcount\absseclevel % used to calculate proper heading level
-\newcount\secbase\secbase=0 % @raise/lowersections modify this count
+\newcount\secbase\secbase=0 % @raisesections/@lowersections modify this count
 
 % @raisesections: treat @section as chapter, @subsection as section, etc.
 \def\raisesections{\global\advance\secbase by -1}
@@ -3761,116 +3811,105 @@ width0pt\relax} \fi
 % #2 is text for heading
 \def\numhead#1#2{\absseclevel=\secbase\advance\absseclevel by #1
 \ifcase\absseclevel
-  \chapterzzz{#2}
-\or
-  \seczzz{#2}
-\or
-  \numberedsubseczzz{#2}
-\or
-  \numberedsubsubseczzz{#2}
-\else
-  \ifnum \absseclevel<0
-    \chapterzzz{#2}
+      \chapterzzz{#2}%
+  \or \seczzz{#2}%
+  \or \numberedsubseczzz{#2}%
+  \or \numberedsubsubseczzz{#2}%
   \else
-    \numberedsubsubseczzz{#2}
+    \ifnum \absseclevel<0 \chapterzzz{#2}%
+    \else \numberedsubsubseczzz{#2}%
+    \fi
   \fi
-\fi
-\suppressfirstparagraphindent
+  \suppressfirstparagraphindent
 }
 
 % like \numhead, but chooses appendix heading levels
 \def\apphead#1#2{\absseclevel=\secbase\advance\absseclevel by #1
 \ifcase\absseclevel
-  \appendixzzz{#2}
-\or
-  \appendixsectionzzz{#2}
-\or
-  \appendixsubseczzz{#2}
-\or
-  \appendixsubsubseczzz{#2}
-\else
-  \ifnum \absseclevel<0
-    \appendixzzz{#2}
+      \appendixzzz{#2}%
+  \or \appendixsectionzzz{#2}%
+  \or \appendixsubseczzz{#2}%
+  \or \appendixsubsubseczzz{#2}%
   \else
-    \appendixsubsubseczzz{#2}
+    \ifnum \absseclevel<0 \appendixzzz{#2}%
+    \else \appendixsubsubseczzz{#2}%
+    \fi
   \fi
-\fi
-\suppressfirstparagraphindent
+  \suppressfirstparagraphindent
 }
 
 % like \numhead, but chooses numberless heading levels
 \def\unnmhead#1#2{\absseclevel=\secbase\advance\absseclevel by #1
-\ifcase\absseclevel
-  \unnumberedzzz{#2}
-\or
-  \unnumberedseczzz{#2}
-\or
-  \unnumberedsubseczzz{#2}
-\or
-  \unnumberedsubsubseczzz{#2}
-\else
-  \ifnum \absseclevel<0
-    \unnumberedzzz{#2}
+  \ifcase\absseclevel
+      \unnumberedzzz{#2}%
+  \or \unnumberedseczzz{#2}%
+  \or \unnumberedsubseczzz{#2}%
+  \or \unnumberedsubsubseczzz{#2}%
   \else
-    \unnumberedsubsubseczzz{#2}
+    \ifnum \absseclevel<0 \unnumberedzzz{#2}%
+    \else \unnumberedsubsubseczzz{#2}%
+    \fi
   \fi
-\fi
-\suppressfirstparagraphindent
-}
-
-% @chapter, @appendix, @unnumbered.
-\def\thischaptername{No Chapter Title}
-\outer\def\chapter{\parsearg\chapteryyy}
-\def\chapteryyy #1{\numhead0{#1}} % normally numhead0 calls chapterzzz
-\def\chapterzzz #1{%
-  \secno=0 \subsecno=0 \subsubsecno=0
-  \global\advance \chapno by 1 \message{\putwordChapter\space \the\chapno}%
-  \chapmacro {#1}{\the\chapno}%
-  \gdef\thissection{#1}%
-  \gdef\thischaptername{#1}%
-  % We don't substitute the actual chapter name into \thischapter
-  % because we don't want its macros evaluated now.
-  \xdef\thischapter{\putwordChapter{} \the\chapno: \noexpand\thischaptername}%
-  \writetocentry{chap}{#1}{{\the\chapno}}
-  \donoderef
+  \suppressfirstparagraphindent
+}
+
+% @chapter, @appendix, @unnumbered.  Increment top-level counter, reset
+% all lower-level sectioning counters to zero.
+% 
+% Also set \chaplevelprefix, which we prepend to @float sequence numbers
+% (e.g., figures), q.v.  By default (before any chapter), that is empty.
+\let\chaplevelprefix = \empty
+% 
+\outer\parseargdef\chapter{\numhead0{#1}} % normally numhead0 calls chapterzzz
+\def\chapterzzz#1{%
+  % section resetting is \global in case the chapter is in a group, such
+  % as an @include file.
+  \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
+    \global\advance\chapno by 1
+  %
+  % Used for \float.
+  \gdef\chaplevelprefix{\the\chapno.}%
+  \resetallfloatnos
+  %
+  \message{\putwordChapter\space \the\chapno}%
+  %
+  % Write the actual heading.
+  \chapmacro{#1}{Ynumbered}{\the\chapno}%
+  %
+  % So @section and the like are numbered underneath this chapter.
   \global\let\section = \numberedsec
   \global\let\subsection = \numberedsubsec
   \global\let\subsubsection = \numberedsubsubsec
 }
 
-% we use \chapno to avoid indenting back
-\def\appendixbox#1{%
-  \setbox0 = \hbox{\putwordAppendix{} \the\chapno}%
-  \hbox to \wd0{#1\hss}}
-
-\outer\def\appendix{\parsearg\appendixyyy}
-\def\appendixyyy #1{\apphead0{#1}} % normally apphead0 calls appendixzzz
-\def\appendixzzz #1{%
-  \secno=0 \subsecno=0 \subsubsecno=0
-  \global\advance \appendixno by 1
-  \message{\putwordAppendix\space \appendixletter}%
-  \chapmacro {#1}{\appendixbox{\putwordAppendix{} \appendixletter}}%
-  \gdef\thissection{#1}%
-  \gdef\thischaptername{#1}%
-  \xdef\thischapter{\putwordAppendix{} \appendixletter: \noexpand\thischaptername}%
-  \writetocentry{appendix}{#1}{{\appendixletter}}
-  \appendixnoderef
+\outer\parseargdef\appendix{\apphead0{#1}} % normally apphead0 calls appendixzzz
+\def\appendixzzz#1{%
+  \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
+    \global\advance\appendixno by 1
+  \gdef\chaplevelprefix{\appendixletter.}%
+  \resetallfloatnos
+  %
+  \def\appendixnum{\putwordAppendix\space \appendixletter}%
+  \message{\appendixnum}%
+  %
+  \chapmacro{#1}{Yappendix}{\appendixletter}%
+  %
   \global\let\section = \appendixsec
   \global\let\subsection = \appendixsubsec
   \global\let\subsubsection = \appendixsubsubsec
 }
 
 % @centerchap is like @unnumbered, but the heading is centered.
-\outer\def\centerchap{\parsearg\centerchapyyy}
-\def\centerchapyyy #1{{\let\unnumbchapmacro=\centerchapmacro \unnumberedyyy{#1}}}
+\outer\parseargdef\centerchap{{\unnumberedyyy{#1}}}
 
-% @top is like @unnumbered.
-\outer\def\top{\parsearg\unnumberedyyy}
-
-\outer\def\unnumbered{\parsearg\unnumberedyyy}
-\def\unnumberedyyy #1{\unnmhead0{#1}} % normally unnmhead0 calls unnumberedzzz
-\def\unnumberedzzz #1{%
-  \secno=0 \subsecno=0 \subsubsecno=0
+\outer\parseargdef\unnumbered{\unnmhead0{#1}} % normally unnmhead0 calls unnumberedzzz
+\def\unnumberedzzz#1{%
+  \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
+    \global\advance\unnumberedno by 1
+  %
+  % Since an unnumbered has no number, no prefix for figures.
+  \global\let\chaplevelprefix = \empty
+  \resetallfloatnos
   %
   % This used to be simply \message{#1}, but TeX fully expands the
   % argument to \message.  Therefore, if #1 contained @-commands, TeX
@@ -3883,112 +3922,84 @@ width0pt\relax} \fi
   % \the<toks register> to achieve this: TeX expands \the<toks> only once,
   % simply yielding the contents of <toks register>.  (We also do this for
   % the toc entries.)
-  \toks0 = {#1}\message{(\the\toks0)}%
+  \toks0 = {#1}%
+  \message{(\the\toks0)}%
+  %
+  \chapmacro{#1}{Ynothing}{\the\unnumberedno}%
   %
-  \unnumbchapmacro {#1}%
-  \gdef\thischapter{#1}\gdef\thissection{#1}%
-  \writetocentry{unnumbchap}{#1}{{\the\chapno}}
-  \unnumbnoderef
   \global\let\section = \unnumberedsec
   \global\let\subsection = \unnumberedsubsec
   \global\let\subsubsection = \unnumberedsubsubsec
 }
 
+% @top is like @unnumbered.
+\let\top\unnumbered
+
 % Sections.
-\outer\def\numberedsec{\parsearg\secyyy}
-\def\secyyy #1{\numhead1{#1}} % normally calls seczzz
-\def\seczzz #1{%
-  \subsecno=0 \subsubsecno=0 \global\advance \secno by 1 %
-  \gdef\thissection{#1}\secheading {#1}{\the\chapno}{\the\secno}%
-  \writetocentry{sec}{#1}{{\the\chapno}{\the\secno}}
-  \donoderef
-  \nobreak
+\outer\parseargdef\numberedsec{\numhead1{#1}} % normally calls seczzz
+\def\seczzz#1{%
+  \global\subsecno=0 \global\subsubsecno=0  \global\advance\secno by 1
+  \sectionheading{#1}{sec}{Ynumbered}{\the\chapno.\the\secno}%
 }
 
-\outer\def\appendixsection{\parsearg\appendixsecyyy}
-\outer\def\appendixsec{\parsearg\appendixsecyyy}
-\def\appendixsecyyy #1{\apphead1{#1}} % normally calls appendixsectionzzz
-\def\appendixsectionzzz #1{%
-  \subsecno=0 \subsubsecno=0 \global\advance \secno by 1 %
-  \gdef\thissection{#1}\secheading {#1}{\appendixletter}{\the\secno}%
-  \writetocentry{sec}{#1}{{\appendixletter}{\the\secno}}
-  \appendixnoderef
-  \nobreak
+\outer\parseargdef\appendixsection{\apphead1{#1}} % normally calls appendixsectionzzz
+\def\appendixsectionzzz#1{%
+  \global\subsecno=0 \global\subsubsecno=0  \global\advance\secno by 1
+  \sectionheading{#1}{sec}{Yappendix}{\appendixletter.\the\secno}%
 }
+\let\appendixsec\appendixsection
 
-\outer\def\unnumberedsec{\parsearg\unnumberedsecyyy}
-\def\unnumberedsecyyy #1{\unnmhead1{#1}} % normally calls unnumberedseczzz
-\def\unnumberedseczzz #1{%
-  \plainsecheading {#1}\gdef\thissection{#1}%
-  \writetocentry{unnumbsec}{#1}{{\the\chapno}{\the\secno}}
-  \unnumbnoderef
-  \nobreak
+\outer\parseargdef\unnumberedsec{\unnmhead1{#1}} % normally calls unnumberedseczzz
+\def\unnumberedseczzz#1{%
+  \global\subsecno=0 \global\subsubsecno=0  \global\advance\secno by 1
+  \sectionheading{#1}{sec}{Ynothing}{\the\unnumberedno.\the\secno}%
 }
 
 % Subsections.
-\outer\def\numberedsubsec{\parsearg\numberedsubsecyyy}
-\def\numberedsubsecyyy #1{\numhead2{#1}} % normally calls numberedsubseczzz
-\def\numberedsubseczzz #1{%
-  \gdef\thissection{#1}\subsubsecno=0 \global\advance \subsecno by 1 %
-  \subsecheading {#1}{\the\chapno}{\the\secno}{\the\subsecno}%
-  \writetocentry{subsec}{#1}{{\the\chapno}{\the\secno}{\the\subsecno}}
-  \donoderef
-  \nobreak
+\outer\parseargdef\numberedsubsec{\numhead2{#1}} % normally calls numberedsubseczzz
+\def\numberedsubseczzz#1{%
+  \global\subsubsecno=0  \global\advance\subsecno by 1
+  \sectionheading{#1}{subsec}{Ynumbered}{\the\chapno.\the\secno.\the\subsecno}%
 }
 
-\outer\def\appendixsubsec{\parsearg\appendixsubsecyyy}
-\def\appendixsubsecyyy #1{\apphead2{#1}} % normally calls appendixsubseczzz
-\def\appendixsubseczzz #1{%
-  \gdef\thissection{#1}\subsubsecno=0 \global\advance \subsecno by 1 %
-  \subsecheading {#1}{\appendixletter}{\the\secno}{\the\subsecno}%
-  \writetocentry{subsec}{#1}{{\appendixletter}{\the\secno}{\the\subsecno}}
-  \appendixnoderef
-  \nobreak
+\outer\parseargdef\appendixsubsec{\apphead2{#1}} % normally calls appendixsubseczzz
+\def\appendixsubseczzz#1{%
+  \global\subsubsecno=0  \global\advance\subsecno by 1
+  \sectionheading{#1}{subsec}{Yappendix}%
+                 {\appendixletter.\the\secno.\the\subsecno}%
 }
 
-\outer\def\unnumberedsubsec{\parsearg\unnumberedsubsecyyy}
-\def\unnumberedsubsecyyy #1{\unnmhead2{#1}} %normally calls unnumberedsubseczzz
-\def\unnumberedsubseczzz #1{%
-  \plainsubsecheading {#1}\gdef\thissection{#1}%
-  \writetocentry{unnumbsubsec}{#1}{{\the\chapno}{\the\secno}{\the\subsecno}}
-  \unnumbnoderef
-  \nobreak
+\outer\parseargdef\unnumberedsubsec{\unnmhead2{#1}} %normally calls unnumberedsubseczzz
+\def\unnumberedsubseczzz#1{%
+  \global\subsubsecno=0  \global\advance\subsecno by 1
+  \sectionheading{#1}{subsec}{Ynothing}%
+                 {\the\unnumberedno.\the\secno.\the\subsecno}%
 }
 
 % Subsubsections.
-\outer\def\numberedsubsubsec{\parsearg\numberedsubsubsecyyy}
-\def\numberedsubsubsecyyy #1{\numhead3{#1}} % normally numberedsubsubseczzz
-\def\numberedsubsubseczzz #1{%
-  \gdef\thissection{#1}\global\advance \subsubsecno by 1 %
-  \subsubsecheading {#1}
-    {\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}%
-  \writetocentry{subsubsec}{#1}{{\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}}
-  \donoderef
-  \nobreak
+\outer\parseargdef\numberedsubsubsec{\numhead3{#1}} % normally numberedsubsubseczzz
+\def\numberedsubsubseczzz#1{%
+  \global\advance\subsubsecno by 1
+  \sectionheading{#1}{subsubsec}{Ynumbered}%
+                 {\the\chapno.\the\secno.\the\subsecno.\the\subsubsecno}%
 }
 
-\outer\def\appendixsubsubsec{\parsearg\appendixsubsubsecyyy}
-\def\appendixsubsubsecyyy #1{\apphead3{#1}} % normally appendixsubsubseczzz
-\def\appendixsubsubseczzz #1{%
-  \gdef\thissection{#1}\global\advance \subsubsecno by 1 %
-  \subsubsecheading {#1}
-    {\appendixletter}{\the\secno}{\the\subsecno}{\the\subsubsecno}%
-  \writetocentry{subsubsec}{#1}{{\appendixletter}{\the\secno}{\the\subsecno}{\the\subsubsecno}}
-  \appendixnoderef
-  \nobreak
+\outer\parseargdef\appendixsubsubsec{\apphead3{#1}} % normally appendixsubsubseczzz
+\def\appendixsubsubseczzz#1{%
+  \global\advance\subsubsecno by 1
+  \sectionheading{#1}{subsubsec}{Yappendix}%
+                 {\appendixletter.\the\secno.\the\subsecno.\the\subsubsecno}%
 }
 
-\outer\def\unnumberedsubsubsec{\parsearg\unnumberedsubsubsecyyy}
-\def\unnumberedsubsubsecyyy #1{\unnmhead3{#1}} %normally unnumberedsubsubseczzz
-\def\unnumberedsubsubseczzz #1{%
-  \plainsubsubsecheading {#1}\gdef\thissection{#1}%
-  \writetocentry{unnumbsubsubsec}{#1}{{\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}}
-  \unnumbnoderef
-  \nobreak
+\outer\parseargdef\unnumberedsubsubsec{\unnmhead3{#1}} %normally unnumberedsubsubseczzz
+\def\unnumberedsubsubseczzz#1{%
+  \global\advance\subsubsecno by 1
+  \sectionheading{#1}{subsubsec}{Ynothing}%
+                 {\the\unnumberedno.\the\secno.\the\subsecno.\the\subsubsecno}%
 }
 
 % These are variants which are not "outer", so they can appear in @ifinfo.
-% Actually, they should now be obsolete; ordinary section commands should work.
+% Actually, they are now be obsolete; ordinary section commands should work.
 \def\infotop{\parsearg\unnumberedzzz}
 \def\infounnumbered{\parsearg\unnumberedzzz}
 \def\infounnumberedsec{\parsearg\unnumberedseczzz}
@@ -4008,9 +4019,9 @@ width0pt\relax} \fi
 % These macros control what the section commands do, according
 % to what kind of chapter we are in (ordinary, appendix, or unnumbered).
 % Define them by default for a numbered chapter.
-\global\let\section = \numberedsec
-\global\let\subsection = \numberedsubsec
-\global\let\subsubsection = \numberedsubsubsec
+\let\section = \numberedsec
+\let\subsection = \numberedsubsec
+\let\subsubsection = \numberedsubsubsec
 
 % Define @majorheading, @heading and @subheading
 
@@ -4023,23 +4034,27 @@ width0pt\relax} \fi
 %          if justification is not attempted.  Hence \raggedright.
 
 
-\def\majorheading{\parsearg\majorheadingzzz}
-\def\majorheadingzzz #1{%
+\def\majorheading{%
   {\advance\chapheadingskip by 10pt \chapbreak }%
-  {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
-                    \parindent=0pt\raggedright
-                    \rm #1\hfill}}\bigskip \par\penalty 200}
+  \parsearg\chapheadingzzz
+}
 
-\def\chapheading{\parsearg\chapheadingzzz}
-\def\chapheadingzzz #1{\chapbreak %
+\def\chapheading{\chapbreak \parsearg\chapheadingzzz}
+\def\chapheadingzzz#1{%
   {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
                     \parindent=0pt\raggedright
-                    \rm #1\hfill}}\bigskip \par\penalty 200}
+                    \rm #1\hfill}}%
+  \bigskip \par\penalty 200\relax
+  \suppressfirstparagraphindent
+}
 
 % @heading, @subheading, @subsubheading.
-\def\heading{\parsearg\plainsecheading}
-\def\subheading{\parsearg\plainsubsecheading}
-\def\subsubheading{\parsearg\plainsubsubsecheading}
+\parseargdef\heading{\sectionheading{#1}{sec}{Yomitfromtoc}{}
+  \suppressfirstparagraphindent}
+\parseargdef\subheading{\sectionheading{#1}{subsec}{Yomitfromtoc}{}
+  \suppressfirstparagraphindent}
+\parseargdef\subsubheading{\sectionheading{#1}{subsubsec}{Yomitfromtoc}{}
+  \suppressfirstparagraphindent}
 
 % These macros generate a chapter, section, etc. heading only
 % (including whitespace, linebreaking, etc. around it),
@@ -4072,7 +4087,7 @@ width0pt\relax} \fi
 \global\let\pagealignmacro=\chappager
 \global\def\HEADINGSon{\HEADINGSsingle}}
 
-\def\CHAPPAGodd{
+\def\CHAPPAGodd{%
 \global\let\contentsalignmacro = \chapoddpage
 \global\let\pchapsepmacro=\chapoddpage
 \global\let\pagealignmacro=\chapoddpage
@@ -4080,30 +4095,79 @@ width0pt\relax} \fi
 
 \CHAPPAGon
 
-\def\CHAPFplain{
+\def\CHAPFplain{%
 \global\let\chapmacro=\chfplain
-\global\let\unnumbchapmacro=\unnchfplain
 \global\let\centerchapmacro=\centerchfplain}
 
-% Plain chapter opening.
-% #1 is the text, #2 the chapter number or empty if unnumbered.
-\def\chfplain#1#2{%
+% Normal chapter opening.
+% 
+% #1 is the text, #2 is the section type (Ynumbered, Ynothing,
+% Yappendix, Yomitfromtoc), #3 the chapter number.
+% 
+% To test against our argument.
+\def\Ynothingkeyword{Ynothing}
+\def\Yomitfromtockeyword{Yomitfromtoc}
+\def\Yappendixkeyword{Yappendix}
+%
+\def\chfplain#1#2#3{%
   \pchapsepmacro
   {%
     \chapfonts \rm
-    \def\chapnum{#2}%
-    \setbox0 = \hbox{#2\ifx\chapnum\empty\else\enspace\fi}%
+    %
+    % Have to define \thissection before calling \donoderef, because the
+    % xref code eventually uses it.  On the other hand, it has to be called
+    % after \pchapsepmacro, or the headline will change too soon.
+    \gdef\thissection{#1}%
+    \gdef\thischaptername{#1}%
+    %
+    % Only insert the separating space if we have a chapter/appendix
+    % number, and don't print the unnumbered ``number''.
+    \def\temptype{#2}%
+    \ifx\temptype\Ynothingkeyword
+      \setbox0 = \hbox{}%
+      \def\toctype{unnchap}%
+      \def\thischapter{#1}%
+    \else\ifx\temptype\Yomitfromtockeyword
+      \setbox0 = \hbox{}% contents like unnumbered, but no toc entry
+      \def\toctype{omit}%
+      \xdef\thischapter{}%
+    \else\ifx\temptype\Yappendixkeyword
+      \setbox0 = \hbox{\putwordAppendix{} #3\enspace}%
+      \def\toctype{app}%
+      % We don't substitute the actual chapter name into \thischapter
+      % because we don't want its macros evaluated now.  And we don't
+      % use \thissection because that changes with each section.
+      %
+      \xdef\thischapter{\putwordAppendix{} \appendixletter:
+                        \noexpand\thischaptername}%
+    \else
+      \setbox0 = \hbox{#3\enspace}%
+      \def\toctype{numchap}%
+      \xdef\thischapter{\putwordChapter{} \the\chapno:
+                        \noexpand\thischaptername}%
+    \fi\fi\fi
+    %
+    % Write the toc entry for this chapter.  Must come before the
+    % \donoderef, because we include the current node name in the toc
+    % entry, and \donoderef resets it to empty.
+    \writetocentry{\toctype}{#1}{#3}%
+    %
+    % For pdftex, we have to write out the node definition (aka, make
+    % the pdfdest) after any page break, but before the actual text has
+    % been typeset.  If the destination for the pdf outline is after the
+    % text, then jumping from the outline may wind up with the text not
+    % being visible, for instance under high magnification.
+    \donoderef{#2}%
+    %
+    % Typeset the actual heading.
     \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright
-          \hangindent = \wd0 \centerparametersmaybe
+          \hangindent=\wd0 \centerparametersmaybe
           \unhbox0 #1\par}%
   }%
   \nobreak\bigskip % no page break after a chapter title
   \nobreak
 }
 
-% Plain opening for unnumbered.
-\def\unnchfplain#1{\chfplain{#1}{}}
-
 % @centerchap -- centered and unnumbered.
 \let\centerparametersmaybe = \relax
 \def\centerchfplain#1{{%
@@ -4112,11 +4176,14 @@ width0pt\relax} \fi
     \leftskip = \rightskip
     \parfillskip = 0pt
   }%
-  \chfplain{#1}{}%
+  \chfplain{#1}{Ynothing}{}%
 }}
 
 \CHAPFplain % The default
 
+% I don't think this chapter style is supported any more, so I'm not
+% updating it with the new noderef stuff.  We'll see.  --karl, 11aug03.
+% 
 \def\unnchfopen #1{%
 \chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
                        \parindent=0pt\raggedright
@@ -4134,61 +4201,95 @@ width0pt\relax} \fi
                        \hfill {\rm #1}\hfill}}\bigskip \par\nobreak
 }
 
-\def\CHAPFopen{
+\def\CHAPFopen{%
 \global\let\chapmacro=\chfopen
-\global\let\unnumbchapmacro=\unnchfopen
 \global\let\centerchapmacro=\centerchfopen}
 
 
-% Section titles.
+% Section titles.  These macros combine the section number parts and
+% call the generic \sectionheading to do the printing.
+% 
 \newskip\secheadingskip
-\def\secheadingbreak{\dobreak \secheadingskip {-1000}}
-\def\secheading#1#2#3{\sectionheading{sec}{#2.#3}{#1}}
-\def\plainsecheading#1{\sectionheading{sec}{}{#1}}
+\def\secheadingbreak{\dobreak \secheadingskip{-1000}}
 
 % Subsection titles.
-\newskip \subsecheadingskip
-\def\subsecheadingbreak{\dobreak \subsecheadingskip {-500}}
-\def\subsecheading#1#2#3#4{\sectionheading{subsec}{#2.#3.#4}{#1}}
-\def\plainsubsecheading#1{\sectionheading{subsec}{}{#1}}
+\newskip\subsecheadingskip
+\def\subsecheadingbreak{\dobreak \subsecheadingskip{-500}}
 
 % Subsubsection titles.
-\let\subsubsecheadingskip = \subsecheadingskip
-\let\subsubsecheadingbreak = \subsecheadingbreak
-\def\subsubsecheading#1#2#3#4#5{\sectionheading{subsubsec}{#2.#3.#4.#5}{#1}}
-\def\plainsubsubsecheading#1{\sectionheading{subsubsec}{}{#1}}
+\def\subsubsecheadingskip{\subsecheadingskip}
+\def\subsubsecheadingbreak{\subsecheadingbreak}
 
 
-% Print any size section title.
-%
-% #1 is the section type (sec/subsec/subsubsec), #2 is the section
-% number (maybe empty), #3 the text.
-\def\sectionheading#1#2#3{%
-  {%
-    \expandafter\advance\csname #1headingskip\endcsname by \parskip
-    \csname #1headingbreak\endcsname
-  }%
+% Print any size, any type, section title.
+% 
+% #1 is the text, #2 is the section level (sec/subsec/subsubsec), #3 is
+% the section type for xrefs (Ynumbered, Ynothing, Yappendix), #4 is the
+% section number.
+% 
+\def\sectionheading#1#2#3#4{%
   {%
     % Switch to the right set of fonts.
-    \csname #1fonts\endcsname \rm
+    \csname #2fonts\endcsname \rm
+    %
+    % Insert space above the heading.
+    \csname #2headingbreak\endcsname
     %
-    % Only insert the separating space if we have a section number.
-    \def\secnum{#2}%
-    \setbox0 = \hbox{#2\ifx\secnum\empty\else\enspace\fi}%
+    % Only insert the space after the number if we have a section number.
+    \def\sectionlevel{#2}%
+    \def\temptype{#3}%
+    %
+    \ifx\temptype\Ynothingkeyword
+      \setbox0 = \hbox{}%
+      \def\toctype{unn}%
+      \gdef\thissection{#1}%
+    \else\ifx\temptype\Yomitfromtockeyword
+      % for @headings -- no section number, don't include in toc,
+      % and don't redefine \thissection.
+      \setbox0 = \hbox{}%
+      \def\toctype{omit}%
+      \let\sectionlevel=\empty
+    \else\ifx\temptype\Yappendixkeyword
+      \setbox0 = \hbox{#4\enspace}%
+      \def\toctype{app}%
+      \gdef\thissection{#1}%
+    \else
+      \setbox0 = \hbox{#4\enspace}%
+      \def\toctype{num}%
+      \gdef\thissection{#1}%
+    \fi\fi\fi
     %
+    % Write the toc entry (before \donoderef).  See comments in \chfplain.
+    \writetocentry{\toctype\sectionlevel}{#1}{#4}%
+    %
+    % Write the node reference (= pdf destination for pdftex).
+    % Again, see comments in \chfplain.
+    \donoderef{#3}%
+    %
+    % Output the actual section heading.
     \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright
-          \hangindent = \wd0 % zero if no section number
-          \unhbox0 #3}%
+          \hangindent=\wd0  % zero if no section number
+          \unhbox0 #1}%
   }%
-  % Add extra space after the heading -- either a line space or a
-  % paragraph space, whichever is more.  (Some people like to set
-  % \parskip to large values for some reason.)  Don't allow stretch, though.
+  % Add extra space after the heading -- half of whatever came above it.
+  % Don't allow stretch, though.
+  \kern .5 \csname #2headingskip\endcsname
+  %
+  % Do not let the kern be a potential breakpoint, as it would be if it
+  % was followed by glue.
   \nobreak
-  \ifdim\parskip>\normalbaselineskip
-    \kern\parskip
-  \else
-    \kern\normalbaselineskip
-  \fi
+  %
+  % We'll almost certainly start a paragraph next, so don't let that
+  % glue accumulate.  (Not a breakpoint because it's preceded by a
+  % discardable item.)
+  \vskip-\parskip
+  %
+  % This \nobreak is purely so the last item on the list is a \penalty
+  % of 10000.  This is so other code, for instance \parsebodycommon, can
+  % check for and avoid allowing breakpoints.  Otherwise, it would
+  % insert a valid breakpoint between:
+  %   @section sec-whatever
+  %   @deffn def-whatever
   \nobreak
 }
 
@@ -4198,119 +4299,152 @@ width0pt\relax} \fi
 \newwrite\tocfile
 
 % Write an entry to the toc file, opening it if necessary.
-% Called from @chapter, etc.  We supply {\folio} at the end of the
-% argument, which will end up as the last argument to the \...entry macro.
-%
-% Usage: \writetocentry{chap}{The Name of The Game}{{\the\chapno}}
+% Called from @chapter, etc.  
+% 
+% Example usage: \writetocentry{sec}{Section Name}{\the\chapno.\the\secno}
+% We append the current node name (if any) and page number as additional
+% arguments for the \{chap,sec,...}entry macros which will eventually
+% read this.  The node name is used in the pdf outlines as the
+% destination to jump to.
+% 
 % We open the .toc file for writing here instead of at @setfilename (or
 % any other fixed time) so that @contents can be anywhere in the document.
+% But if #1 is `omit', then we don't do anything.  This is used for the
+% table of contents chapter openings themselves.
 %
 \newif\iftocfileopened
+\def\omitkeyword{omit}%
+%
 \def\writetocentry#1#2#3{%
-  \iftocfileopened\else
-    \immediate\openout\tocfile = \jobname.toc
-    \global\tocfileopenedtrue
-  \fi
-  %
-  \iflinks
-    \toks0 = {#2}%
-    \edef\temp{\write\tocfile{\realbackslash #1entry{\the\toks0}#3{\folio}}}%
-    \temp
+  \edef\writetoctype{#1}%
+  \ifx\writetoctype\omitkeyword \else
+    \iftocfileopened\else
+      \immediate\openout\tocfile = \jobname.toc
+      \global\tocfileopenedtrue
+    \fi
+    %
+    \iflinks
+      \toks0 = {#2}%
+      \toks2 = \expandafter{\lastnode}%
+      \edef\temp{\write\tocfile{\realbackslash #1entry{\the\toks0}{#3}%
+                               {\the\toks2}{\noexpand\folio}}}%
+      \temp
+    \fi
   \fi
   %
-  % Tell \shipout to create a page destination if we're doing pdf, which
-  % will be the target of the links in the table of contents.  We can't
-  % just do it on every page because the title pages are numbered 1 and
-  % 2 (the page numbers aren't printed), and so are the first two pages
-  % of the document.  Thus, we'd have two destinations named `1', and
-  % two named `2'.
-  \ifpdf \pdfmakepagedesttrue \fi
+  % Tell \shipout to create a pdf destination on each page, if we're
+  % writing pdf.  These are used in the table of contents.  We can't
+  % just write one on every page because the title pages are numbered
+  % 1 and 2 (the page numbers aren't printed), and so are the first
+  % two pages of the document.  Thus, we'd have two destinations named
+  % `1', and two named `2'.
+  \ifpdf \global\pdfmakepagedesttrue \fi
 }
 
 \newskip\contentsrightmargin \contentsrightmargin=1in
 \newcount\savepageno
 \newcount\lastnegativepageno \lastnegativepageno = -1
 
-% Finish up the main text and prepare to read what we've written
-% to \tocfile.
+% Prepare to read what we've written to \tocfile.
 %
 \def\startcontents#1{%
-   % If @setchapternewpage on, and @headings double, the contents should
-   % start on an odd page, unlike chapters.  Thus, we maintain
-   % \contentsalignmacro in parallel with \pagealignmacro.
-   % From: Torbjorn Granlund <tege@matematik.su.se>
-   \contentsalignmacro
-   \immediate\closeout\tocfile
-   %
-   % Don't need to put `Contents' or `Short Contents' in the headline.
-   % It is abundantly clear what they are.
-   \unnumbchapmacro{#1}\def\thischapter{}%
-   \savepageno = \pageno
-   \begingroup                  % Set up to handle contents files properly.
-      \catcode`\\=0  \catcode`\{=1  \catcode`\}=2  \catcode`\@=11
-      % We can't do this, because then an actual ^ in a section
-      % title fails, e.g., @chapter ^ -- exponentiation.  --karl, 9jul97.
-      %\catcode`\^=7 % to see ^^e4 as \"a etc. juha@piuha.ydi.vtt.fi
-      \raggedbottom             % Worry more about breakpoints than the bottom.
-      \advance\hsize by -\contentsrightmargin % Don't use the full line length.
-      %
-      % Roman numerals for page numbers.
-      \ifnum \pageno>0 \global\pageno = \lastnegativepageno \fi
+  % If @setchapternewpage on, and @headings double, the contents should
+  % start on an odd page, unlike chapters.  Thus, we maintain
+  % \contentsalignmacro in parallel with \pagealignmacro.
+  % From: Torbjorn Granlund <tege@matematik.su.se>
+  \contentsalignmacro
+  \immediate\closeout\tocfile
+  %
+  % Don't need to put `Contents' or `Short Contents' in the headline.
+  % It is abundantly clear what they are.
+  \def\thischapter{}%
+  \chapmacro{#1}{Yomitfromtoc}{}%
+  %
+  \savepageno = \pageno
+  \begingroup                  % Set up to handle contents files properly.
+    \catcode`\\=0  \catcode`\{=1  \catcode`\}=2  \catcode`\@=11
+    % We can't do this, because then an actual ^ in a section
+    % title fails, e.g., @chapter ^ -- exponentiation.  --karl, 9jul97.
+    %\catcode`\^=7 % to see ^^e4 as \"a etc. juha@piuha.ydi.vtt.fi
+    \raggedbottom             % Worry more about breakpoints than the bottom.
+    \advance\hsize by -\contentsrightmargin % Don't use the full line length.
+    %
+    % Roman numerals for page numbers.
+    \ifnum \pageno>0 \global\pageno = \lastnegativepageno \fi
 }
 
 
 % Normal (long) toc.
 \def\contents{%
-   \startcontents{\putwordTOC}%
-     \openin 1 \jobname.toc
-     \ifeof 1 \else
-       \closein 1
-       \input \jobname.toc
-     \fi
-     \vfill \eject
-     \contentsalignmacro % in case @setchapternewpage odd is in effect
-     \pdfmakeoutlines
-   \endgroup
-   \lastnegativepageno = \pageno
-   \global\pageno = \savepageno
+  \startcontents{\putwordTOC}%
+    \openin 1 \jobname.toc
+    \ifeof 1 \else
+      \input \jobname.toc
+    \fi
+    \vfill \eject
+    \contentsalignmacro % in case @setchapternewpage odd is in effect
+    \ifeof 1 \else
+      \pdfmakeoutlines
+    \fi
+    \closein 1
+  \endgroup
+  \lastnegativepageno = \pageno
+  \global\pageno = \savepageno
 }
 
 % And just the chapters.
 \def\summarycontents{%
-   \startcontents{\putwordShortTOC}%
-      %
-      \let\chapentry = \shortchapentry
-      \let\appendixentry = \shortappendixentry
-      \let\unnumbchapentry = \shortunnumberedentry
-      % We want a true roman here for the page numbers.
-      \secfonts
-      \let\rm=\shortcontrm \let\bf=\shortcontbf
-      \let\sl=\shortcontsl \let\tt=\shortconttt
-      \rm
-      \hyphenpenalty = 10000
-      \advance\baselineskip by 1pt % Open it up a little.
-      \def\secentry ##1##2##3##4{}
-      \def\subsecentry ##1##2##3##4##5{}
-      \def\subsubsecentry ##1##2##3##4##5##6{}
-      \let\unnumbsecentry = \secentry
-      \let\unnumbsubsecentry = \subsecentry
-      \let\unnumbsubsubsecentry = \subsubsecentry
-      \openin 1 \jobname.toc
-      \ifeof 1 \else
-        \closein 1
-        \input \jobname.toc
-      \fi
-     \vfill \eject
-     \contentsalignmacro % in case @setchapternewpage odd is in effect
-   \endgroup
-   \lastnegativepageno = \pageno
-   \global\pageno = \savepageno
+  \startcontents{\putwordShortTOC}%
+    %
+    \let\numchapentry = \shortchapentry
+    \let\appentry = \shortchapentry
+    \let\unnchapentry = \shortunnchapentry
+    % We want a true roman here for the page numbers.
+    \secfonts
+    \let\rm=\shortcontrm \let\bf=\shortcontbf
+    \let\sl=\shortcontsl \let\tt=\shortconttt
+    \rm
+    \hyphenpenalty = 10000
+    \advance\baselineskip by 1pt % Open it up a little.
+    \def\numsecentry##1##2##3##4{}
+    \let\appsecentry = \numsecentry
+    \let\unnsecentry = \numsecentry
+    \let\numsubsecentry = \numsecentry
+    \let\appsubsecentry = \numsecentry
+    \let\unnsubsecentry = \numsecentry
+    \let\numsubsubsecentry = \numsecentry
+    \let\appsubsubsecentry = \numsecentry
+    \let\unnsubsubsecentry = \numsecentry
+    \openin 1 \jobname.toc
+    \ifeof 1 \else
+      \input \jobname.toc
+    \fi
+    \closein 1
+    \vfill \eject
+    \contentsalignmacro % in case @setchapternewpage odd is in effect
+  \endgroup
+  \lastnegativepageno = \pageno
+  \global\pageno = \savepageno
 }
 \let\shortcontents = \summarycontents
 
-\ifpdf
-  \pdfcatalog{/PageMode /UseOutlines}%
-\fi
+% Typeset the label for a chapter or appendix for the short contents.
+% The arg is, e.g., `A' for an appendix, or `3' for a chapter.
+%
+\def\shortchaplabel#1{%
+  % This space should be enough, since a single number is .5em, and the
+  % widest letter (M) is 1em, at least in the Computer Modern fonts.
+  % But use \hss just in case.
+  % (This space doesn't include the extra space that gets added after
+  % the label; that gets put in by \shortchapentry above.)
+  % 
+  % We'd like to right-justify chapter numbers, but that looks strange
+  % with appendix letters.  And right-justifying numbers and
+  % left-justifying letters looks strange when there is less than 10
+  % chapters.  Have to read the whole toc once to know how many chapters
+  % there are before deciding ...
+  \hbox to 1em{#1\hss}%
+}
 
 % These macros generate individual entries in the table of contents.
 % The first argument is the chapter or section name.
@@ -4318,58 +4452,45 @@ width0pt\relax} \fi
 % The arguments in between are the chapter number, section number, ...
 
 % Chapters, in the main contents.
-\def\chapentry#1#2#3{\dochapentry{#2\labelspace#1}{#3}}
+\def\numchapentry#1#2#3#4{\dochapentry{#2\labelspace#1}{#4}}
 %
 % Chapters, in the short toc.
 % See comments in \dochapentry re vbox and related settings.
-\def\shortchapentry#1#2#3{%
-  \tocentry{\shortchaplabel{#2}\labelspace #1}{\doshortpageno\bgroup#3\egroup}%
+\def\shortchapentry#1#2#3#4{%
+  \tocentry{\shortchaplabel{#2}\labelspace #1}{\doshortpageno\bgroup#4\egroup}%
 }
 
 % Appendices, in the main contents.
-\def\appendixentry#1#2#3{%
-  \dochapentry{\appendixbox{\putwordAppendix{} #2}\labelspace#1}{#3}}
-%
-% Appendices, in the short toc.
-\let\shortappendixentry = \shortchapentry
-
-% Typeset the label for a chapter or appendix for the short contents.
-% The arg is, e.g., `Appendix A' for an appendix, or `3' for a chapter.
-% We could simplify the code here by writing out an \appendixentry
-% command in the toc file for appendices, instead of using \chapentry
-% for both, but it doesn't seem worth it.
-%
-\newdimen\shortappendixwidth
+% Need the word Appendix, and a fixed-size box.
+% 
+\def\appendixbox#1{%
+  % We use M since it's probably the widest letter.
+  \setbox0 = \hbox{\putwordAppendix{} M}%
+  \hbox to \wd0{\putwordAppendix{} #1\hss}}
 %
-\def\shortchaplabel#1{%
-  % This space should be enough, since a single number is .5em, and the
-  % widest letter (M) is 1em, at least in the Computer Modern fonts.
-  % But use \hss just in case.
-  % (This space doesn't include the extra space that gets added after
-  % the label; that gets put in by \shortchapentry above.)
-  \dimen0 = 1em
-  \hbox to \dimen0{#1\hss}%
-}
+\def\appentry#1#2#3#4{\dochapentry{\appendixbox{#2}\labelspace#1}{#4}}
 
 % Unnumbered chapters.
-\def\unnumbchapentry#1#2#3{\dochapentry{#1}{#3}}
-\def\shortunnumberedentry#1#2#3{\tocentry{#1}{\doshortpageno\bgroup#3\egroup}}
+\def\unnchapentry#1#2#3#4{\dochapentry{#1}{#4}}
+\def\shortunnchapentry#1#2#3#4{\tocentry{#1}{\doshortpageno\bgroup#4\egroup}}
 
 % Sections.
-\def\secentry#1#2#3#4{\dosecentry{#2.#3\labelspace#1}{#4}}
-\def\unnumbsecentry#1#2#3#4{\dosecentry{#1}{#4}}
+\def\numsecentry#1#2#3#4{\dosecentry{#2\labelspace#1}{#4}}
+\let\appsecentry=\numsecentry
+\def\unnsecentry#1#2#3#4{\dosecentry{#1}{#4}}
 
 % Subsections.
-\def\subsecentry#1#2#3#4#5{\dosubsecentry{#2.#3.#4\labelspace#1}{#5}}
-\def\unnumbsubsecentry#1#2#3#4#5{\dosubsecentry{#1}{#5}}
+\def\numsubsecentry#1#2#3#4{\dosubsecentry{#2\labelspace#1}{#4}}
+\let\appsubsecentry=\numsubsecentry
+\def\unnsubsecentry#1#2#3#4{\dosubsecentry{#1}{#4}}
 
 % And subsubsections.
-\def\subsubsecentry#1#2#3#4#5#6{%
-  \dosubsubsecentry{#2.#3.#4.#5\labelspace#1}{#6}}
-\def\unnumbsubsubsecentry#1#2#3#4#5#6{\dosubsubsecentry{#1}{#6}}
+\def\numsubsubsecentry#1#2#3#4{\dosubsubsecentry{#2\labelspace#1}{#4}}
+\let\appsubsubsecentry=\numsubsubsecentry
+\def\unnsubsubsecentry#1#2#3#4{\dosubsubsecentry{#1}{#4}}
 
 % This parameter controls the indentation of the various levels.
-\newdimen\tocindent \tocindent = 3pc
+\newdimen\tocindent \tocindent = 2pc
 
 % Now for the actual typesetting. In all these, #1 is the text and #2 is the
 % page number.
@@ -4400,17 +4521,8 @@ width0pt\relax} \fi
   \tocentry{#1}{\dopageno\bgroup#2\egroup}%
 \endgroup}
 
-% Final typesetting of a toc entry; we use the same \entry macro as for
-% the index entries, but we want to suppress hyphenation here.  (We
-% can't do that in the \entry macro, since index entries might consist
-% of hyphenated-identifiers-that-do-not-fit-on-a-line-and-nothing-else.)
-\def\tocentry#1#2{\begingroup
-  \vskip 0pt plus1pt % allow a little stretch for the sake of nice page breaks
-  % Do not use \turnoffactive in these arguments.  Since the toc is
-  % typeset in cmr, characters such as _ would come out wrong; we
-  % have to do the usual translation tricks.
-  \entry{#1}{#2}%
-\endgroup}
+% We use the same \entry macro as for the index entries.
+\let\tocentry = \entry
 
 % Space between chapter (or whatever) number and the title.
 \def\labelspace{\hskip1em \relax}
@@ -4420,8 +4532,8 @@ width0pt\relax} \fi
 
 \def\chapentryfonts{\secfonts \rm}
 \def\secentryfonts{\textfonts}
-\let\subsecentryfonts = \textfonts
-\let\subsubsecentryfonts = \textfonts
+\def\subsecentryfonts{\textfonts}
+\def\subsubsecentryfonts{\textfonts}
 
 
 \message{environments,}
@@ -4448,10 +4560,10 @@ width0pt\relax} \fi
 % The text. (`r' is open on the right, `e' somewhat less so on the left.)
 \setbox0 = \hbox{\kern-.75pt \tensf error\kern-1.5pt}
 %
-\global\setbox\errorbox=\hbox to \dimen0{\hfil
+\setbox\errorbox=\hbox to \dimen0{\hfil
    \hsize = \dimen0 \advance\hsize by -5.8pt % Space to left+right.
    \advance\hsize by -2\dimen2 % Rules.
-   \vbox{
+   \vbox{%
       \hrule height\dimen2
       \hbox{\vrule width\dimen2 \kern3pt          % Space to left of text.
          \vtop{\kern2.4pt \box0 \kern2.4pt}% Space above/below.
@@ -4465,14 +4577,13 @@ width0pt\relax} \fi
 % One exception: @ is still an escape character, so that @end tex works.
 % But \@ or @@ will get a plain tex @ character.
 
-\def\tex{\begingroup
+\envdef\tex{%
   \catcode `\\=0 \catcode `\{=1 \catcode `\}=2
   \catcode `\$=3 \catcode `\&=4 \catcode `\#=6
   \catcode `\^=7 \catcode `\_=8 \catcode `\~=\active \let~=\tie
   \catcode `\%=14
   \catcode `\+=\other
   \catcode `\"=\other
-  \catcode `\==\other
   \catcode `\|=\other
   \catcode `\<=\other
   \catcode `\>=\other
@@ -4488,6 +4599,7 @@ width0pt\relax} \fi
   \let\!=\ptexexclam
   \let\i=\ptexi
   \let\indent=\ptexindent
+  \let\noindent=\ptexnoindent
   \let\{=\ptexlbrace
   \let\+=\tabalign
   \let\}=\ptexrbrace
@@ -4498,10 +4610,11 @@ width0pt\relax} \fi
   \def\endldots{\mathinner{\ldots\ldots\ldots\ldots}}%
   \def\enddots{\relax\ifmmode\endldots\else$\mathsurround=0pt \endldots\,$\fi}%
   \def\@{@}%
-\let\Etex=\endgroup}
+}
+% There is no need to define \Etex.
 
 % Define @lisp ... @end lisp.
-% @lisp does a \begingroup so it can rebind things,
+% @lisp environment forms a group so it can rebind things,
 % including the definition of @end lisp (which normally is erroneous).
 
 % Amount to narrow the margins by for @lisp.
@@ -4512,19 +4625,6 @@ width0pt\relax} \fi
 % have any width.
 \def\lisppar{\null\endgraf}
 
-% Make each space character in the input produce a normal interword
-% space in the output.  Don't allow a line break at this space, as this
-% is used only in environments like @example, where each line of input
-% should produce a line of output anyway.
-%
-{\obeyspaces %
-\gdef\sepspaces{\obeyspaces\let =\tie}}
-
-% Define \obeyedspace to be our active space, whatever it is.  This is
-% for use in \parsearg.
-{\sepspaces%
-\global\let\obeyedspace= }
-
 % This space is always present above and below environments.
 \newskip\envskipamount \envskipamount = 0pt
 
@@ -4574,52 +4674,52 @@ width0pt\relax} \fi
 %
 \newskip\lskip\newskip\rskip
 
-\def\cartouche{%
-\par  % can't be in the midst of a paragraph.
-\begingroup
-        \lskip=\leftskip \rskip=\rightskip
-        \leftskip=0pt\rightskip=0pt %we want these *outside*.
-        \cartinner=\hsize \advance\cartinner by-\lskip
-                          \advance\cartinner by-\rskip
-        \cartouter=\hsize
-        \advance\cartouter by 18.4pt % allow for 3pt kerns on either
-%                                    side, and for 6pt waste from
-%                                    each corner char, and rule thickness
-        \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip
-        % Flag to tell @lisp, etc., not to narrow margin.
-        \let\nonarrowing=\comment
-        \vbox\bgroup
-                \baselineskip=0pt\parskip=0pt\lineskip=0pt
-                \carttop
-                \hbox\bgroup
-                        \hskip\lskip
-                        \vrule\kern3pt
-                        \vbox\bgroup
-                                \hsize=\cartinner
-                                \kern3pt
-                                \begingroup
-                                        \baselineskip=\normbskip
-                                        \lineskip=\normlskip
-                                        \parskip=\normpskip
-                                        \vskip -\parskip
+\envdef\cartouche{%
+  \ifhmode\par\fi  % can't be in the midst of a paragraph.
+  \startsavinginserts
+  \lskip=\leftskip \rskip=\rightskip
+  \leftskip=0pt\rightskip=0pt % we want these *outside*.
+  \cartinner=\hsize \advance\cartinner by-\lskip
+  \advance\cartinner by-\rskip
+  \cartouter=\hsize
+  \advance\cartouter by 18.4pt	% allow for 3pt kerns on either
+				% side, and for 6pt waste from
+				% each corner char, and rule thickness
+  \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip
+  % Flag to tell @lisp, etc., not to narrow margin.
+  \let\nonarrowing=\comment
+  \vbox\bgroup
+      \baselineskip=0pt\parskip=0pt\lineskip=0pt
+      \carttop
+      \hbox\bgroup
+	  \hskip\lskip
+	  \vrule\kern3pt
+	  \vbox\bgroup
+	      \kern3pt
+	      \hsize=\cartinner
+	      \baselineskip=\normbskip
+	      \lineskip=\normlskip
+	      \parskip=\normpskip
+	      \vskip -\parskip
+	      \comment % For explanation, see the end of \def\group.
+}
 \def\Ecartouche{%
-                                \endgroup
-                                \kern3pt
-                        \egroup
-                        \kern3pt\vrule
-                        \hskip\rskip
-                \egroup
-                \cartbot
-        \egroup
-\endgroup
-}}
+              \ifhmode\par\fi
+	      \kern3pt
+	  \egroup
+	  \kern3pt\vrule
+	  \hskip\rskip
+      \egroup
+      \cartbot
+  \egroup
+  \checkinserts
+}
 
 
 % This macro is called at the beginning of all the @example variants,
 % inside a group.
 \def\nonfillstart{%
   \aboveenvbreak
-  \inENV % This group ends at the end of the body
   \hfuzz = 12pt % Don't be fussy
   \sepspaces % Make spaces be word-separators rather than space tokens.
   \let\par = \lisppar % don't ignore blank lines
@@ -4632,103 +4732,71 @@ width0pt\relax} \fi
   \ifx\nonarrowing\relax
     \advance \leftskip by \lispnarrowing
     \exdentamount=\lispnarrowing
-    \let\exdent=\nofillexdent
-    \let\nonarrowing=\relax
   \fi
+  \let\exdent=\nofillexdent
+}
+
+% We often define two environments, @foo and @smallfoo.
+% Let's do it by one command:
+\def\makedispenv #1#2{
+  \expandafter\envdef\csname#1\endcsname{#2}
+  \expandafter\envdef\csname small#1\endcsname
+    {\smallexamplefonts \rm #2}
+  \expandafter\let\csname E#1\endcsname \afterenvbreak
+  \expandafter\let\csname Esmall#1\endcsname \afterenvbreak
+}
+
+% And there are often two synonyms:
+\def\maketwodispenvs #1#2#3{
+  \makedispenv{#1}{#3}
+  \makedispenv{#2}{#3}
 }
 
-% Define the \E... control sequence only if we are inside the particular
-% environment, so the error checking in \end will work.
+% @lisp: indented, narrowed, typewriter font; @example: same as @lisp.
 %
-% To end an @example-like environment, we first end the paragraph (via
-% \afterenvbreak's vertical glue), and then the group.  That way we keep
-% the zero \parskip that the environments set -- \parskip glue will be
-% inserted at the beginning of the next paragraph in the document, after
-% the environment.
+% @smallexample and @smalllisp: use smaller fonts.
+% Originally contributed by Pavel@xerox.
 %
-\def\nonfillfinish{\afterenvbreak\endgroup}
-
-% @lisp: indented, narrowed, typewriter font.
-\def\lisp{\begingroup
+\maketwodispenvs {lisp}{example}{%
   \nonfillstart
-  \let\Elisp = \nonfillfinish
   \tt
   \let\kbdfont = \kbdexamplefont % Allow @kbd to do something special.
   \gobble       % eat return
 }
 
-% @example: Same as @lisp.
-\def\example{\begingroup \def\Eexample{\nonfillfinish\endgroup}\lisp}
-
-% @smallexample and @smalllisp: use smaller fonts.
-% Originally contributed by Pavel@xerox.
-\def\smalllisp{\begingroup
-  \def\Esmalllisp{\nonfillfinish\endgroup}%
-  \def\Esmallexample{\nonfillfinish\endgroup}%
-  \smallexamplefonts
-  \lisp
-}
-\let\smallexample = \smalllisp
-
-
-% @display: same as @lisp except keep current font.
+% @display/@smalldisplay: same as @lisp except keep current font.
 %
-\def\display{\begingroup
+\makedispenv {display}{%
   \nonfillstart
-  \let\Edisplay = \nonfillfinish
   \gobble
 }
-%
-% @smalldisplay: @display plus smaller fonts.
-%
-\def\smalldisplay{\begingroup
-  \def\Esmalldisplay{\nonfillfinish\endgroup}%
-  \smallexamplefonts \rm
-  \display
-}
 
-% @format: same as @display except don't narrow margins.
+% @format/@smallformat: same as @display except don't narrow margins.
+% @flushleft (same as @format).  (Note: @smallflushleft not documeted.)
 %
-\def\format{\begingroup
-  \let\nonarrowing = t
+\maketwodispenvs {format}{flushleft}{%
+  \let\nonarrowing = t%
   \nonfillstart
-  \let\Eformat = \nonfillfinish
   \gobble
 }
-%
-% @smallformat: @format plus smaller fonts.
-%
-\def\smallformat{\begingroup
-  \def\Esmallformat{\nonfillfinish\endgroup}%
-  \smallexamplefonts \rm
-  \format
-}
-
-% @flushleft (same as @format).
-%
-\def\flushleft{\begingroup \def\Eflushleft{\nonfillfinish\endgroup}\format}
 
 % @flushright.
 %
-\def\flushright{\begingroup
-  \let\nonarrowing = t
+\envdef\flushright{%
+  \let\nonarrowing = t%
   \nonfillstart
-  \let\Eflushright = \nonfillfinish
   \advance\leftskip by 0pt plus 1fill
   \gobble
 }
+\let\Eflushright = \afterenvbreak
 
 
 % @quotation does normal linebreaking (hence we can't use \nonfillstart)
 % and narrows the margins.
 %
-\def\quotation{%
-  \begingroup\inENV %This group ends at the end of the @quotation body
+\envdef\quotation{%
   {\parskip=0pt \aboveenvbreak}% because \aboveenvbreak inserts \parskip
   \parindent=0pt
-  % We have retained a nonzero parskip for the environment, since we're
-  % doing normal filling. So to avoid extra space below the environment...
-  \def\Equotation{\parskip = 0pt \nonfillfinish}%
   %
   % @cartouche defines \nonarrowing to inhibit narrowing at next level down.
   \ifx\nonarrowing\relax
@@ -4737,6 +4805,19 @@ width0pt\relax} \fi
     \exdentamount = \lispnarrowing
     \let\nonarrowing = \relax
   \fi
+  \parsearg\quotationlabel
+}
+
+% We have retained a nonzero parskip for the environment, since we're
+% doing normal filling. So to avoid extra space below the environment...
+\def\Equotation{\parskip = 0pt \afterenvbreak}
+
+% If we're given an argument, typeset it in bold with a colon after.
+\def\quotationlabel#1{%
+  \def\temp{#1}%
+  \ifx\temp\empty \else
+    {\bf #1: }%
+  \fi
 }
 
 
@@ -4758,7 +4839,7 @@ width0pt\relax} \fi
 %
 % [Knuth] p. 380
 \def\uncatcodespecials{%
-  \def\do##1{\catcode`##1=12}\dospecials}
+  \def\do##1{\catcode`##1=\other}\dospecials}
 %
 % [Knuth] pp. 380,381,391
 % Disable Spanish ligatures ?` and !` of \tt font
@@ -4806,6 +4887,8 @@ width0pt\relax} \fi
   }
 \endgroup
 \def\setupverbatim{%
+  \nonfillstart
+  \advance\leftskip by -\defbodyindent
   % Easiest (and conventionally used) font for verbatim
   \tt
   \def\par{\leavevmode\egroup\box0\endgraf}%
@@ -4827,7 +4910,7 @@ width0pt\relax} \fi
 %
 % [Knuth] p. 382; only eat outer {}
 \begingroup
-  \catcode`[=1\catcode`]=2\catcode`\{=12\catcode`\}=12
+  \catcode`[=1\catcode`]=2\catcode`\{=\other\catcode`\}=\other
   \gdef\doverb{#1[\def\next##1#1}[##1\endgroup]\next]
 \endgroup
 %
@@ -4844,13 +4927,6 @@ width0pt\relax} \fi
 % we need not redefine '\', '{' and '}'.
 %
 % Inspired by LaTeX's verbatim command set [latex.ltx]
-%% Include LaTeX hack for completeness -- never know
-%% \begingroup
-%% \catcode`|=0 \catcode`[=1
-%% \catcode`]=2\catcode`\{=12\catcode`\}=12\catcode`\ =\active
-%% \catcode`\\=12|gdef|doverbatim#1@end verbatim[
-%% #1|endgroup|def|Everbatim[]|end[verbatim]]
-%% |endgroup
 %
 \begingroup
   \catcode`\ =\active
@@ -4858,49 +4934,28 @@ width0pt\relax} \fi
   % ignore everything up to the first ^^M, that's the newline at the end
   % of the @verbatim input line itself.  Otherwise we get an extra blank
   % line in the output.
-  \gdef\doverbatim#1^^M#2@end verbatim{#2\end{verbatim}}%
+  \xdef\doverbatim#1^^M#2@end verbatim{#2\noexpand\end\gobble verbatim}%
+  % We really want {...\end verbatim} in the body of the macro, but
+  % without the active space; thus we have to use \xdef and \gobble.
 \endgroup
 %
-\def\verbatim{%
-  \def\Everbatim{\nonfillfinish\endgroup}%
-  \begingroup
-    \nonfillstart
-    \advance\leftskip by -\defbodyindent
-    \begingroup\setupverbatim\doverbatim
+\envdef\verbatim{%
+    \setupverbatim\doverbatim
 }
+\let\Everbatim = \afterenvbreak
+
 
 % @verbatiminclude FILE - insert text of file in verbatim environment.
 %
-% Allow normal characters that we make active in the argument (a file name).
-\def\verbatiminclude{%
-  \begingroup
-    \catcode`\\=\other
-    \catcode`~=\other
-    \catcode`^=\other
-    \catcode`_=\other
-    \catcode`|=\other
-    \catcode`<=\other
-    \catcode`>=\other
-    \catcode`+=\other
-    \parsearg\doverbatiminclude
-}
-\def\setupverbatiminclude{%
-  \begingroup
-    \nonfillstart
-    \advance\leftskip by -\defbodyindent
-    \begingroup\setupverbatim
-}
+\def\verbatiminclude{\parseargusing\filenamecatcodes\doverbatiminclude}
 %
 \def\doverbatiminclude#1{%
-     % Restore active chars for included file.
-  \endgroup
-  \begingroup
-    \let\value=\expandablevalue
-    \def\thisfile{#1}%
-    \expandafter\expandafter\setupverbatiminclude\input\thisfile
-  \endgroup
-  \nonfillfinish
-  \endgroup
+  {%
+    \makevalueexpandable
+    \setupverbatim
+    \input #1
+    \afterenvbreak
+  }%
 }
 
 % @copying ... @end copying.
@@ -4975,581 +5030,335 @@ width0pt\relax} \fi
 \message{defuns,}
 % @defun etc.
 
-% Allow user to change definition object font (\df) internally
-\def\setdeffont#1 {\csname DEF#1\endcsname}
-
 \newskip\defbodyindent \defbodyindent=.4in
 \newskip\defargsindent \defargsindent=50pt
 \newskip\deflastargmargin \deflastargmargin=18pt
 
-\newcount\parencount
-
-% We want ()&[] to print specially on the defun line.
-%
-\def\activeparens{%
-  \catcode`\(=\active \catcode`\)=\active
-  \catcode`\&=\active
-  \catcode`\[=\active \catcode`\]=\active
-}
-
-% Make control sequences which act like normal parenthesis chars.
-\let\lparen = ( \let\rparen = )
-
-{\activeparens % Now, smart parens don't turn on until &foo (see \amprm)
-
-% Be sure that we always have a definition for `(', etc.  For example,
-% if the fn name has parens in it, \boldbrax will not be in effect yet,
-% so TeX would otherwise complain about undefined control sequence.
-\global\let(=\lparen \global\let)=\rparen
-\global\let[=\lbrack \global\let]=\rbrack
-
-\gdef\functionparens{\boldbrax\let&=\amprm\parencount=0 }
-\gdef\boldbrax{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb}
-% This is used to turn on special parens
-% but make & act ordinary (given that it's active).
-\gdef\boldbraxnoamp{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb\let&=\ampnr}
-
-% Definitions of (, ) and & used in args for functions.
-% This is the definition of ( outside of all parentheses.
-\gdef\oprm#1 {{\rm\char`\(}#1 \bf \let(=\opnested
-  \global\advance\parencount by 1
-}
-%
-% This is the definition of ( when already inside a level of parens.
-\gdef\opnested{\char`\(\global\advance\parencount by 1 }
-%
-\gdef\clrm{% Print a paren in roman if it is taking us back to depth of 0.
-  % also in that case restore the outer-level definition of (.
-  \ifnum \parencount=1 {\rm \char `\)}\sl \let(=\oprm \else \char `\) \fi
-  \global\advance \parencount by -1 }
-% If we encounter &foo, then turn on ()-hacking afterwards
-\gdef\amprm#1 {{\rm\&#1}\let(=\oprm \let)=\clrm\ }
-%
-\gdef\normalparens{\boldbrax\let&=\ampnr}
-} % End of definition inside \activeparens
-%% These parens (in \boldbrax) actually are a little bolder than the
-%% contained text.  This is especially needed for [ and ]
-\def\opnr{{\sf\char`\(}\global\advance\parencount by 1 }
-\def\clnr{{\sf\char`\)}\global\advance\parencount by -1 }
-\let\ampnr = \&
-\def\lbrb{{\bf\char`\[}}
-\def\rbrb{{\bf\char`\]}}
-
-% Active &'s sneak into the index arguments, so make sure it's defined.
-{
-  \catcode`& = \active
-  \global\let& = \ampnr
-}
-
-% \defname, which formats the name of the @def (not the args).
-% #1 is the function name.
-% #2 is the type of definition, such as "Function".
-%
-\def\defname#1#2{%
-  % How we'll output the type name.  Putting it in brackets helps
-  % distinguish it from the body text that may end up on the next line
-  % just below it.
-  \ifempty{#2}%
-    \def\defnametype{}%
+% Start the processing of @deffn:
+\def\startdefun{%
+  \ifnum\lastpenalty<10000
+    \medbreak
   \else
-    \def\defnametype{[\rm #2]}%
+    % If there are two @def commands in a row, we'll have a \nobreak,
+    % which is there to keep the function description together with its
+    % header.  But if there's nothing but headers, we need to allow a
+    % break somewhere.  Check for penalty 10002 (inserted by
+    % \defargscommonending) instead of 10000, since the sectioning
+    % commands insert a \penalty10000, and we don't want to allow a break
+    % between a section heading and a defun.
+    \ifnum\lastpenalty=10002 \penalty2000 \fi
+    %
+    % Similarly, after a section heading, do not allow a break.
+    % But do insert the glue.
+    \medskip  % preceded by discardable penalty, so not a breakpoint
   \fi
   %
-  % Get the values of \leftskip and \rightskip as they were outside the @def...
-  \dimen2=\leftskip
-  \advance\dimen2 by -\defbodyindent
-  %
-  % Figure out values for the paragraph shape.
-  \setbox0=\hbox{\hskip \deflastargmargin{\defnametype}}%
-  \dimen0=\hsize \advance \dimen0 by -\wd0  % compute size for first line
-  \dimen1=\hsize \advance \dimen1 by -\defargsindent  % size for continuations
-  \parshape 2 0in \dimen0 \defargsindent \dimen1
-  %
-  % Output arg 2 ("Function" or some such) but stuck inside a box of
-  % width 0 so it does not interfere with linebreaking.
-  \noindent
-  %
-  {% Adjust \hsize to exclude the ambient margins,
-   % so that \rightline will obey them.
-   \advance \hsize by -\dimen2
-   \dimen3 = 0pt  % was -1.25pc
-   \rlap{\rightline{\defnametype\kern\dimen3}}%
-  }%
-  %
-  % Allow all lines to be underfull without complaint:
-  \tolerance=10000 \hbadness=10000
-  \advance\leftskip by -\defbodyindent
-  \exdentamount=\defbodyindent
-  {\df #1}\enskip        % output function name
-  % \defunargs will be called next to output the arguments, if any.
-}
-
-% Common pieces to start any @def...
-% #1 is the \E... control sequence to end the definition (which we define).
-% #2 is the \...x control sequence (which our caller defines).
-% #3 is the control sequence to process the header, such as \defunheader.
-%
-\def\parsebodycommon#1#2#3{%
-  \begingroup\inENV
-  % If there are two @def commands in a row, we'll have a \nobreak,
-  % which is there to keep the function description together with its
-  % header.  But if there's nothing but headers, we want to allow a
-  % break after all.  Check for penalty 10002 (inserted by
-  % \defargscommonending) instead of 10000, since the sectioning
-  % commands insert a \penalty10000, and we don't want to allow a break
-  % between a section heading and a defun.
-  \ifnum\lastpenalty=10002 \penalty0 \fi
-  \medbreak
-  %
-  % Define the \E... end token that this defining construct specifies
-  % so that it will exit this group.
-  \def#1{\endgraf\endgroup\medbreak}%
-  %
   \parindent=0in
   \advance\leftskip by \defbodyindent
   \exdentamount=\defbodyindent
 }
 
-% Common part of the \...x definitions.
-%
-\def\defxbodycommon{%
-  % As with \parsebodycommon above, allow line break if we have multiple
-  % x headers in a row.  It's not a great place, though.
-  \ifnum\lastpenalty=10000 \penalty1000 \fi
+\def\dodefunx#1{%
+  % First, check whether we are in the right environment:
+  \checkenv#1%
+  %
+  % As above, allow line break if we have multiple x headers in a row.
+  % It's not a great place, though.
+  \ifnum\lastpenalty=10002 \penalty3000 \fi
   %
-  \begingroup\obeylines
+  % And now, it's time to reuse the body of the original defun:
+  \expandafter\gobbledefun#1%
 }
+\def\gobbledefun#1\startdefun{}
 
-% Process body of @defun, @deffn, @defmac, etc.
+% \printdefunline \deffnheader{text}
 %
-\def\defparsebody#1#2#3{%
-  \parsebodycommon{#1}{#2}{#3}%
-  \def#2{\defxbodycommon \activeparens \spacesplit#3}%
-  \catcode\equalChar=\active
-  \begingroup\obeylines\activeparens
-  \spacesplit#3%
+\def\printdefunline#1#2{%
+  \begingroup
+    % call \deffnheader:
+    #1#2 \endheader
+    % common ending:
+    \interlinepenalty = 10000
+    \advance\rightskip by 0pt plus 1fil
+    \endgraf
+    \nobreak\vskip -\parskip
+    \penalty 10002  % signal to \startdefun and \dodefunx
+    % Some of the @defun-type tags do not enable magic parentheses,
+    % rendering the following check redundant.  But we don't optimize.
+    \checkparencounts
+  \endgroup
 }
 
-% #1, #2, #3 are the common arguments (see \parsebodycommon above).
-% #4, delimited by the space, is the class name.
-%
-\def\defmethparsebody#1#2#3#4 {%
-  \parsebodycommon{#1}{#2}{#3}%
-  \def#2##1 {\defxbodycommon \activeparens \spacesplit{#3{##1}}}%
-  \begingroup\obeylines\activeparens
-  % The \empty here prevents misinterpretation of a construct such as
-  %   @deffn {whatever} {Enharmonic comma}
-  % See comments at \deftpparsebody, although in our case we don't have
-  % to remove the \empty afterwards, since it is empty.
-  \spacesplit{#3{#4}}\empty
-}
+\def\Edefun{\endgraf\medbreak}
 
-% Used for @deftypemethod and @deftypeivar.
-% #1, #2, #3 are the common arguments (see \defparsebody).
-% #4, delimited by a space, is the class name.
-% #5 is the method's return type.
+% \makedefun{deffn} creates \deffn, \deffnx and \Edeffn;
+% the only thing remainnig is to define \deffnheader.
 %
-\def\deftypemethparsebody#1#2#3#4 #5 {%
-  \parsebodycommon{#1}{#2}{#3}%
-  \def#2##1 ##2 {\defxbodycommon \activeparens \spacesplit{#3{##1}{##2}}}%
-  \begingroup\obeylines\activeparens
-  \spacesplit{#3{#4}{#5}}%
+\def\makedefun#1{%
+  \expandafter\let\csname E#1\endcsname = \Edefun
+  \edef\temp{\noexpand\domakedefun
+    \makecsname{#1}\makecsname{#1x}\makecsname{#1header}}%
+  \temp
 }
 
-% Used for @deftypeop.  The change from \deftypemethparsebody is an
-% extra argument at the beginning which is the `category', instead of it
-% being the hardwired string `Method' or `Instance Variable'.  We have
-% to account for this both in the \...x definition and in parsing the
-% input at hand.  Thus also need a control sequence (passed as #5) for
-% the \E... definition to assign the category name to.
+% \domakedefun \deffn \deffnx \deffnheader
 %
-\def\deftypeopparsebody#1#2#3#4#5 #6 {%
-  \parsebodycommon{#1}{#2}{#3}%
-  \def#2##1 ##2 ##3 {\def#4{##1}%
-    \defxbodycommon \activeparens \spacesplit{#3{##2}{##3}}}%
-  \begingroup\obeylines\activeparens
-  \spacesplit{#3{#5}{#6}}%
-}
-
-% For @defop.
-\def\defopparsebody #1#2#3#4#5 {%
-  \parsebodycommon{#1}{#2}{#3}%
-  \def#2##1 ##2 {\def#4{##1}%
-    \defxbodycommon \activeparens \spacesplit{#3{##2}}}%
-  \begingroup\obeylines\activeparens
-  \spacesplit{#3{#5}}%
-}
-
-% These parsing functions are similar to the preceding ones
-% except that they do not make parens into active characters.
-% These are used for "variables" since they have no arguments.
+% Define \deffn and \deffnx, without parameters.
+% \deffnheader has to be defined explicitly.
 %
-\def\defvarparsebody #1#2#3{%
-  \parsebodycommon{#1}{#2}{#3}%
-  \def#2{\defxbodycommon \spacesplit#3}%
-  \catcode\equalChar=\active
-  \begingroup\obeylines
-  \spacesplit#3%
+\def\domakedefun#1#2#3{%
+  \envdef#1{%
+    \startdefun
+    \parseargusing\activeparens{\printdefunline#3}%
+  }%
+  \def#2{\dodefunx#1}%
+  \def#3%
 }
 
-% @defopvar.
-\def\defopvarparsebody #1#2#3#4#5 {%
-  \parsebodycommon{#1}{#2}{#3}%
-  \def#2##1 ##2 {\def#4{##1}%
-    \defxbodycommon \spacesplit{#3{##2}}}%
-  \begingroup\obeylines
-  \spacesplit{#3{#5}}%
-}
+%%% Untyped functions:
 
-\def\defvrparsebody#1#2#3#4 {%
-  \parsebodycommon{#1}{#2}{#3}%
-  \def#2##1 {\defxbodycommon \spacesplit{#3{##1}}}%
-  \begingroup\obeylines
-  \spacesplit{#3{#4}}%
-}
+% @deffn category name args
+\makedefun{deffn}{\deffngeneral{}}
 
-% This loses on `@deftp {Data Type} {struct termios}' -- it thinks the
-% type is just `struct', because we lose the braces in `{struct
-% termios}' when \spacesplit reads its undelimited argument.  Sigh.
-% \let\deftpparsebody=\defvrparsebody
-%
-% So, to get around this, we put \empty in with the type name.  That
-% way, TeX won't find exactly `{...}' as an undelimited argument, and
-% won't strip off the braces.
-%
-\def\deftpparsebody #1#2#3#4 {%
-  \parsebodycommon{#1}{#2}{#3}%
-  \def#2##1 {\defxbodycommon \spacesplit{#3{##1}}}%
-  \begingroup\obeylines
-  \spacesplit{\parsetpheaderline{#3{#4}}}\empty
-}
-
-% Fine, but then we have to eventually remove the \empty *and* the
-% braces (if any).  That's what this does.
-%
-\def\removeemptybraces\empty#1\relax{#1}
+% @deffn category class name args
+\makedefun{defop}#1 {\defopon{#1\ \putwordon}}
 
-% After \spacesplit has done its work, this is called -- #1 is the final
-% thing to call, #2 the type name (which starts with \empty), and #3
-% (which might be empty) the arguments.
-%
-\def\parsetpheaderline#1#2#3{%
-  #1{\removeemptybraces#2\relax}{#3}%
-}%
+% \defopon {category on}class name args
+\def\defopon#1#2 {\deffngeneral{\putwordon\ \code{#2}}{#1\ \code{#2}} }
 
-% Split up #2 (the rest of the input line) at the first space token.
-% call #1 with two arguments:
-%  the first is all of #2 before the space token,
-%  the second is all of #2 after that space token.
-% If #2 contains no space token, all of it is passed as the first arg
-% and the second is passed as empty.
+% \deffngeneral {subind}category name args
 %
-{\obeylines %
- \gdef\spacesplit#1#2^^M{\endgroup\spacesplitx{#1}#2 \relax\spacesplitx}%
- \long\gdef\spacesplitx#1#2 #3#4\spacesplitx{%
-   \ifx\relax #3%
-     #1{#2}{}%
-   \else %
-     #1{#2}{#3#4}%
-   \fi}%
+\def\deffngeneral#1#2 #3 #4\endheader{%
+  % Remember that \dosubin{fn}{xxx}{} is equivalent to \doind{fn}{xxx}.
+  \dosubind{fn}{\code{#3}}{#1}%
+  \defname{#2}{}{#3}\magicamp\defunargs{#4\unskip}%
 }
 
-% Define @defun.
+%%% Typed functions:
 
-% This is called to end the arguments processing for all the @def... commands.
-%
-\def\defargscommonending{%
-  \interlinepenalty = 10000
-  \advance\rightskip by 0pt plus 1fil
-  \endgraf
-  \nobreak\vskip -\parskip
-  \penalty 10002  % signal to \parsebodycommon.
-}
+% @deftypefn category type name args
+\makedefun{deftypefn}{\deftypefngeneral{}}
+
+% @deftypeop category class type name args
+\makedefun{deftypeop}#1 {\deftypeopon{#1\ \putwordon}}
 
-% This expands the args and terminates the paragraph they comprise.
+% \deftypeopon {category on}class type name args
+\def\deftypeopon#1#2 {\deftypefngeneral{\putwordon\ \code{#2}}{#1\ \code{#2}} }
+
+% \deftypefngeneral {subind}category type name args
 %
-\def\defunargs#1{\functionparens \sl
-% Expand, preventing hyphenation at `-' chars.
-% Note that groups don't affect changes in \hyphenchar.
-% Set the font temporarily and use \font in case \setfont made \tensl a macro.
-{\tensl\hyphenchar\font=0}%
-#1%
-{\tensl\hyphenchar\font=45}%
-\ifnum\parencount=0 \else \errmessage{Unbalanced parentheses in @def}\fi%
-  \defargscommonending
+\def\deftypefngeneral#1#2 #3 #4 #5\endheader{%
+  \dosubind{fn}{\code{#4}}{#1}%
+  \defname{#2}{#3}{#4}\defunargs{#5\unskip}%
 }
 
-\def\deftypefunargs #1{%
-% Expand, preventing hyphenation at `-' chars.
-% Note that groups don't affect changes in \hyphenchar.
-% Use \boldbraxnoamp, not \functionparens, so that & is not special.
-\boldbraxnoamp
-\tclose{#1}% avoid \code because of side effects on active chars
-  \defargscommonending
-}
+%%% Typed variables:
 
-% Do complete processing of one @defun or @defunx line already parsed.
+% @deftypevr category type var args
+\makedefun{deftypevr}{\deftypecvgeneral{}}
 
-% @deffn Command forward-char nchars
+% @deftypecv category class type var args
+\makedefun{deftypecv}#1 {\deftypecvof{#1\ \putwordof}}
 
-\def\deffn{\defmethparsebody\Edeffn\deffnx\deffnheader}
+% \deftypecvof {category of}class type var args
+\def\deftypecvof#1#2 {\deftypecvgeneral{\putwordof\ \code{#2}}{#1\ \code{#2}} }
 
-\def\deffnheader #1#2#3{\doind {fn}{\code{#2}}%
-\begingroup\defname {#2}{#1}\defunargs{#3}\endgroup %
-\catcode\equalChar=\other % Turn off change made in \defparsebody
+% \deftypecvgeneral {subind}category type var args
+%
+\def\deftypecvgeneral#1#2 #3 #4 #5\endheader{%
+  \dosubind{vr}{\code{#4}}{#1}%
+  \defname{#2}{#3}{#4}\defunargs{#5\unskip}%
 }
 
-% @defun == @deffn Function
-
-\def\defun{\defparsebody\Edefun\defunx\defunheader}
+%%% Untyped variables:
 
-\def\defunheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index
-\begingroup\defname {#1}{\putwordDeffunc}%
-\defunargs {#2}\endgroup %
-\catcode\equalChar=\other % Turn off change made in \defparsebody
-}
+% @defvr category var args
+\makedefun{defvr}#1 {\deftypevrheader{#1} {} }
 
-% @deftypefun int foobar (int @var{foo}, float @var{bar})
+% @defcv category class var args
+\makedefun{defcv}#1 {\defcvof{#1\ \putwordof}}
 
-\def\deftypefun{\defparsebody\Edeftypefun\deftypefunx\deftypefunheader}
+% \defcvof {category of}class var args
+\def\defcvof#1#2 {\deftypecvof{#1}#2 {} }
 
-% #1 is the data type.  #2 is the name and args.
-\def\deftypefunheader #1#2{\deftypefunheaderx{#1}#2 \relax}
-% #1 is the data type, #2 the name, #3 the args.
-\def\deftypefunheaderx #1#2 #3\relax{%
-\doind {fn}{\code{#2}}% Make entry in function index
-\begingroup\defname {\defheaderxcond#1\relax$.$#2}{\putwordDeftypefun}%
-\deftypefunargs {#3}\endgroup %
-\catcode\equalChar=\other % Turn off change made in \defparsebody
+%%% Type:
+% @deftp category name args
+\makedefun{deftp}#1 #2 #3\endheader{%
+  \doind{tp}{\code{#2}}%
+  \defname{#1}{}{#2}\defunargs{#3\unskip}%
 }
 
-% @deftypefn {Library Function} int foobar (int @var{foo}, float @var{bar})
-
-\def\deftypefn{\defmethparsebody\Edeftypefn\deftypefnx\deftypefnheader}
+% Remaining @defun-like shortcuts:
+\makedefun{defun}{\deffnheader{\putwordDeffunc} }
+\makedefun{defmac}{\deffnheader{\putwordDefmac} }
+\makedefun{defspec}{\deffnheader{\putwordDefspec} }
+\makedefun{deftypefun}{\deftypefnheader{\putwordDeffunc} }
+\makedefun{defvar}{\defvrheader{\putwordDefvar} }
+\makedefun{defopt}{\defvrheader{\putwordDefopt} }
+\makedefun{deftypevar}{\deftypevrheader{\putwordDefvar} }
+\makedefun{defmethod}{\defopon\putwordMethodon}
+\makedefun{deftypemethod}{\deftypeopon\putwordMethodon}
+\makedefun{defivar}{\defcvof\putwordInstanceVariableof}
+\makedefun{deftypeivar}{\deftypecvof\putwordInstanceVariableof}
 
-% \defheaderxcond#1\relax$.$
-% puts #1 in @code, followed by a space, but does nothing if #1 is null.
-\def\defheaderxcond#1#2$.${\ifx#1\relax\else\code{#1#2} \fi}
-
-% #1 is the classification.  #2 is the data type.  #3 is the name and args.
-\def\deftypefnheader #1#2#3{\deftypefnheaderx{#1}{#2}#3 \relax}
-% #1 is the classification, #2 the data type, #3 the name, #4 the args.
-\def\deftypefnheaderx #1#2#3 #4\relax{%
-\doind {fn}{\code{#3}}% Make entry in function index
-\begingroup
-\normalparens % notably, turn off `&' magic, which prevents
-%               at least some C++ text from working
-\defname {\defheaderxcond#2\relax$.$#3}{#1}%
-\deftypefunargs {#4}\endgroup %
-\catcode\equalChar=\other % Turn off change made in \defparsebody
+% \defname, which formats the name of the @def (not the args).
+% #1 is the category, such as "Function".
+% #2 is the return type, if any.
+% #3 is the function name.
+% 
+% We are followed by (but not passed) the arguments, if any.
+%
+\def\defname#1#2#3{%
+  % Get the values of \leftskip and \rightskip as they were outside the @def...
+  \advance\leftskip by -\defbodyindent
+  %
+  % How we'll format the type name.  Putting it in brackets helps
+  % distinguish it from the body text that may end up on the next line
+  % just below it.
+  \def\temp{#1}%
+  \setbox0=\hbox{\kern\deflastargmargin \ifx\temp\empty\else [\rm\temp]\fi}
+  %
+  % Figure out line sizes for the paragraph shape.
+  % The first line needs space for \box0; but if \rightskip is nonzero,
+  % we need only space for the part of \box0 which exceeds it:
+  \dimen0=\hsize  \advance\dimen0 by -\wd0  \advance\dimen0 by \rightskip
+  % The continuations:
+  \dimen2=\hsize  \advance\dimen2 by -\defargsindent
+  % (plain.tex says that \dimen1 should be used only as global.)
+  \parshape 2 0in \dimen0 \defargsindent \dimen2
+  %
+  % Put the type name to the right margin.
+  \noindent
+  \hbox to 0pt{%
+    \hfil\box0 \kern-\hsize
+    % \hsize has to be shortened this way:
+    \kern\leftskip
+    % Intentionally do not respect \rightskip, since we need the space.
+  }%
+  %
+  % Allow all lines to be underfull without complaint:
+  \tolerance=10000 \hbadness=10000
+  \exdentamount=\defbodyindent
+  {%
+    % defun fonts. We use typewriter by default (used to be bold) because:
+    % . we're printing identifiers, they should be in tt in principle.
+    % . in languages with many accents, such as Czech or French, it's
+    %   common to leave accents off identifiers.  The result looks ok in
+    %   tt, but exceedingly strange in rm.
+    % . we don't want -- and --- to be treated as ligatures.
+    % . this still does not fix the ?` and !` ligatures, but so far no
+    %   one has made identifiers using them :).
+    \df \tt
+    \def\temp{#2}% return value type
+    \ifx\temp\empty\else \tclose{\temp} \fi
+    #3% output function name
+  }%
+  {\rm\enskip}% hskip 0.5 em of \tenrm
+  %
+  \boldbrax
+  % arguments will be output next, if any.
+}
+
+% Print arguments in slanted typewriter, prevent hyphenation at `-' chars.
+% 
+\def\defunargs#1{%
+  % use sl by default (not ttsl), inconsistently with using tt for the
+  % name.  This is because literal text is sometimes needed in the
+  % argument list (groff manual), and ttsl and tt are not very
+  % distinguishable.
+  % tt for the names.
+  \df \sl \hyphenchar\font=0
+  % On the other hand, if an argument has two dashes (for instance), we
+  % want a way to get ttsl.  Let's try @var for that.
+  \let\var=\ttslanted
+  #1%
+  \sl\hyphenchar\font=45
 }
 
-% @defmac == @deffn Macro
-
-\def\defmac{\defparsebody\Edefmac\defmacx\defmacheader}
-
-\def\defmacheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index
-\begingroup\defname {#1}{\putwordDefmac}%
-\defunargs {#2}\endgroup %
-\catcode\equalChar=\other % Turn off change made in \defparsebody
+% We want ()&[] to print specially on the defun line.
+%
+\def\activeparens{%
+  \catcode`\(=\active \catcode`\)=\active
+  \catcode`\[=\active \catcode`\]=\active
+  \catcode`\&=\active
 }
 
-% @defspec == @deffn Special Form
+% Make control sequences which act like normal parenthesis chars.
+\let\lparen = ( \let\rparen = )
 
-\def\defspec{\defparsebody\Edefspec\defspecx\defspecheader}
+% Be sure that we always have a definition for `(', etc.  For example,
+% if the fn name has parens in it, \boldbrax will not be in effect yet,
+% so TeX would otherwise complain about undefined control sequence.
+{
+  \activeparens
+  \global\let(=\lparen \global\let)=\rparen
+  \global\let[=\lbrack \global\let]=\rbrack
+  \global\let& = \&
 
-\def\defspecheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index
-\begingroup\defname {#1}{\putwordDefspec}%
-\defunargs {#2}\endgroup %
-\catcode\equalChar=\other % Turn off change made in \defparsebody
+  \gdef\boldbrax{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb}
+  \gdef\magicamp{\let&=\amprm}
 }
 
-% @defop CATEGORY CLASS OPERATION ARG...
-%
-\def\defop #1 {\def\defoptype{#1}%
-\defopparsebody\Edefop\defopx\defopheader\defoptype}
-%
-\def\defopheader#1#2#3{%
-  \dosubind{fn}{\code{#2}}{\putwordon\ \code{#1}}% function index entry
-  \begingroup
-    \defname{#2}{\defoptype\ \putwordon\ #1}%
-    \defunargs{#3}%
-  \endgroup
-}
+\newcount\parencount
 
-% @deftypeop CATEGORY CLASS TYPE OPERATION ARG...
-%
-\def\deftypeop #1 {\def\deftypeopcategory{#1}%
-  \deftypeopparsebody\Edeftypeop\deftypeopx\deftypeopheader
-                       \deftypeopcategory}
-%
-% #1 is the class name, #2 the data type, #3 the operation name, #4 the args.
-\def\deftypeopheader#1#2#3#4{%
-  \dosubind{fn}{\code{#3}}{\putwordon\ \code{#1}}% entry in function index
-  \begingroup
-    \defname{\defheaderxcond#2\relax$.$#3}
-            {\deftypeopcategory\ \putwordon\ \code{#1}}%
-    \deftypefunargs{#4}%
-  \endgroup
+% If we encounter &foo, then turn on ()-hacking afterwards
+\newif\ifampseen
+\def\amprm#1 {\ampseentrue{\bf\&#1 }}
+
+\def\parenfont{%
+  \ifampseen
+    % At the first level, print parens in roman,
+    % otherwise use the default font.
+    \ifnum \parencount=1 \rm \fi
+  \else
+    % The \sf parens (in \boldbrax) actually are a little bolder than
+    % the contained text.  This is especially needed for [ and ] .
+    \sf
+  \fi
 }
-
-% @deftypemethod CLASS TYPE METHOD ARG...
-%
-\def\deftypemethod{%
-  \deftypemethparsebody\Edeftypemethod\deftypemethodx\deftypemethodheader}
-%
-% #1 is the class name, #2 the data type, #3 the method name, #4 the args.
-\def\deftypemethodheader#1#2#3#4{%
-  \dosubind{fn}{\code{#3}}{\putwordon\ \code{#1}}% entry in function index
-  \begingroup
-    \defname{\defheaderxcond#2\relax$.$#3}{\putwordMethodon\ \code{#1}}%
-    \deftypefunargs{#4}%
-  \endgroup
+\def\infirstlevel#1{%
+  \ifampseen
+    \ifnum\parencount=1
+      #1%
+    \fi
+  \fi
 }
+\def\bfafterword#1 {#1 \bf}
 
-% @deftypeivar CLASS TYPE VARNAME
-%
-\def\deftypeivar{%
-  \deftypemethparsebody\Edeftypeivar\deftypeivarx\deftypeivarheader}
-%
-% #1 is the class name, #2 the data type, #3 the variable name.
-\def\deftypeivarheader#1#2#3{%
-  \dosubind{vr}{\code{#3}}{\putwordof\ \code{#1}}% entry in variable index
-  \begingroup
-    \defname{\defheaderxcond#2\relax$.$#3}
-            {\putwordInstanceVariableof\ \code{#1}}%
-    \defvarargs{#3}%
-  \endgroup
+\def\opnr{%
+  \global\advance\parencount by 1
+  {\parenfont(}%
+  \infirstlevel \bfafterword
 }
-
-% @defmethod == @defop Method
-%
-\def\defmethod{\defmethparsebody\Edefmethod\defmethodx\defmethodheader}
-%
-% #1 is the class name, #2 the method name, #3 the args.
-\def\defmethodheader#1#2#3{%
-  \dosubind{fn}{\code{#2}}{\putwordon\ \code{#1}}% entry in function index
-  \begingroup
-    \defname{#2}{\putwordMethodon\ \code{#1}}%
-    \defunargs{#3}%
-  \endgroup
+\def\clnr{%
+  {\parenfont)}%
+  \infirstlevel \sl
+  \global\advance\parencount by -1
 }
 
-% @defcv {Class Option} foo-class foo-flag
-
-\def\defcv #1 {\def\defcvtype{#1}%
-\defopvarparsebody\Edefcv\defcvx\defcvarheader\defcvtype}
-
-\def\defcvarheader #1#2#3{%
-  \dosubind{vr}{\code{#2}}{\putwordof\ \code{#1}}% variable index entry
-  \begingroup
-    \defname{#2}{\defcvtype\ \putwordof\ #1}%
-    \defvarargs{#3}%
-  \endgroup
+\newcount\brackcount
+\def\lbrb{%
+  \global\advance\brackcount by 1
+  {\bf[}%
 }
-
-% @defivar CLASS VARNAME == @defcv {Instance Variable} CLASS VARNAME
-%
-\def\defivar{\defvrparsebody\Edefivar\defivarx\defivarheader}
-%
-\def\defivarheader#1#2#3{%
-  \dosubind{vr}{\code{#2}}{\putwordof\ \code{#1}}% entry in var index
-  \begingroup
-    \defname{#2}{\putwordInstanceVariableof\ #1}%
-    \defvarargs{#3}%
-  \endgroup
+\def\rbrb{%
+  {\bf]}%
+  \global\advance\brackcount by -1
 }
 
-% @defvar
-% First, define the processing that is wanted for arguments of @defvar.
-% This is actually simple: just print them in roman.
-% This must expand the args and terminate the paragraph they make up
-\def\defvarargs #1{\normalparens #1%
-  \defargscommonending
+\def\checkparencounts{%
+  \ifnum\parencount=0 \else \badparencount \fi
+  \ifnum\brackcount=0 \else \badbrackcount \fi
 }
-
-% @defvr Counter foo-count
-
-\def\defvr{\defvrparsebody\Edefvr\defvrx\defvrheader}
-
-\def\defvrheader #1#2#3{\doind {vr}{\code{#2}}%
-\begingroup\defname {#2}{#1}\defvarargs{#3}\endgroup}
-
-% @defvar == @defvr Variable
-
-\def\defvar{\defvarparsebody\Edefvar\defvarx\defvarheader}
-
-\def\defvarheader #1#2{\doind {vr}{\code{#1}}% Make entry in var index
-\begingroup\defname {#1}{\putwordDefvar}%
-\defvarargs {#2}\endgroup %
+\def\badparencount{%
+  \errmessage{Unbalanced parentheses in @def}%
+  \global\parencount=0
 }
-
-% @defopt == @defvr {User Option}
-
-\def\defopt{\defvarparsebody\Edefopt\defoptx\defoptheader}
-
-\def\defoptheader #1#2{\doind {vr}{\code{#1}}% Make entry in var index
-\begingroup\defname {#1}{\putwordDefopt}%
-\defvarargs {#2}\endgroup %
+\def\badbrackcount{%
+  \errmessage{Unbalanced square braces in @def}%
+  \global\brackcount=0
 }
 
-% @deftypevar int foobar
-
-\def\deftypevar{\defvarparsebody\Edeftypevar\deftypevarx\deftypevarheader}
-
-% #1 is the data type.  #2 is the name, perhaps followed by text that
-% is actually part of the data type, which should not be put into the index.
-\def\deftypevarheader #1#2{%
-\dovarind#2 \relax% Make entry in variables index
-\begingroup\defname {\defheaderxcond#1\relax$.$#2}{\putwordDeftypevar}%
-  \defargscommonending
-\endgroup}
-\def\dovarind#1 #2\relax{\doind{vr}{\code{#1}}}
-
-% @deftypevr {Global Flag} int enable
-
-\def\deftypevr{\defvrparsebody\Edeftypevr\deftypevrx\deftypevrheader}
-
-\def\deftypevrheader #1#2#3{\dovarind#3 \relax%
-\begingroup\defname {\defheaderxcond#2\relax$.$#3}{#1}
-  \defargscommonending
-\endgroup}
-
-% Now define @deftp
-% Args are printed in bold, a slight difference from @defvar.
-
-\def\deftpargs #1{\bf \defvarargs{#1}}
-
-% @deftp Class window height width ...
-
-\def\deftp{\deftpparsebody\Edeftp\deftpx\deftpheader}
-
-\def\deftpheader #1#2#3{\doind {tp}{\code{#2}}%
-\begingroup\defname {#2}{#1}\deftpargs{#3}\endgroup}
-
-% These definitions are used if you use @defunx (etc.)
-% anywhere other than immediately after a @defun or @defunx.
-%
-\def\defcvx#1 {\errmessage{@defcvx in invalid context}}
-\def\deffnx#1 {\errmessage{@deffnx in invalid context}}
-\def\defivarx#1 {\errmessage{@defivarx in invalid context}}
-\def\defmacx#1 {\errmessage{@defmacx in invalid context}}
-\def\defmethodx#1 {\errmessage{@defmethodx in invalid context}}
-\def\defoptx #1 {\errmessage{@defoptx in invalid context}}
-\def\defopx#1 {\errmessage{@defopx in invalid context}}
-\def\defspecx#1 {\errmessage{@defspecx in invalid context}}
-\def\deftpx#1 {\errmessage{@deftpx in invalid context}}
-\def\deftypefnx#1 {\errmessage{@deftypefnx in invalid context}}
-\def\deftypefunx#1 {\errmessage{@deftypefunx in invalid context}}
-\def\deftypeivarx#1 {\errmessage{@deftypeivarx in invalid context}}
-\def\deftypemethodx#1 {\errmessage{@deftypemethodx in invalid context}}
-\def\deftypeopx#1 {\errmessage{@deftypeopx in invalid context}}
-\def\deftypevarx#1 {\errmessage{@deftypevarx in invalid context}}
-\def\deftypevrx#1 {\errmessage{@deftypevrx in invalid context}}
-\def\defunx#1 {\errmessage{@defunx in invalid context}}
-\def\defvarx#1 {\errmessage{@defvarx in invalid context}}
-\def\defvrx#1 {\errmessage{@defvrx in invalid context}}
-
 
 \message{macros,}
 % @macro.
@@ -5557,28 +5366,33 @@ width0pt\relax} \fi
 % To do this right we need a feature of e-TeX, \scantokens,
 % which we arrange to emulate with a temporary file in ordinary TeX.
 \ifx\eTeXversion\undefined
- \newwrite\macscribble
- \def\scanmacro#1{%
-   \begingroup \newlinechar`\^^M
-   % Undo catcode changes of \startcontents and \doprintindex
-   \catcode`\@=0 \catcode`\\=\other \escapechar=`\@
-   % Append \endinput to make sure that TeX does not see the ending newline.
-   \toks0={#1\endinput}%
-   \immediate\openout\macscribble=\jobname.tmp
-   \immediate\write\macscribble{\the\toks0}%
-   \immediate\closeout\macscribble
-   \let\xeatspaces\eatspaces
-   \input \jobname.tmp
-   \endgroup
-}
-\else
-\def\scanmacro#1{%
-\begingroup \newlinechar`\^^M
-% Undo catcode changes of \startcontents and \doprintindex
-\catcode`\@=0 \catcode`\\=\other \escapechar=`\@
-\let\xeatspaces\eatspaces\scantokens{#1\endinput}\endgroup}
+  \newwrite\macscribble
+  \def\scantokens#1{%
+    \toks0={#1\endinput}%
+    \immediate\openout\macscribble=\jobname.tmp
+    \immediate\write\macscribble{\the\toks0}%
+    \immediate\closeout\macscribble
+    \input \jobname.tmp
+  }
 \fi
 
+\def\scanmacro#1{%
+  \begingroup
+    \newlinechar`\^^M
+    \let\xeatspaces\eatspaces
+    % Undo catcode changes of \startcontents and \doprintindex
+    \catcode`\@=0 \catcode`\\=\other \escapechar=`\@
+    % ... and \example
+    \spaceisspace
+    %
+    % Append \endinput to make sure that TeX does not see the ending newline.
+    %
+    % I've verified that it is necessary both for e-TeX and for ordinary TeX
+    %							--kasal, 29nov03
+    \scantokens{#1\endinput}%
+  \endgroup
+}
+
 \newcount\paramno   % Count of parameters
 \newtoks\macname    % Macro name
 \newif\ifrecursive  % Is it recursive?
@@ -5586,7 +5400,7 @@ width0pt\relax} \fi
                     % \do\macro1\do\macro2...
 
 % Utility routines.
-% Thisdoes \let #1 = #2, except with \csnames.
+% This does \let #1 = #2, except with \csnames.
 \def\cslet#1#2{%
 \expandafter\expandafter
 \expandafter\let
@@ -5683,8 +5497,7 @@ width0pt\relax} \fi
   \else \expandafter\parsemacbody
   \fi}
 
-\def\unmacro{\parsearg\dounmacro}
-\def\dounmacro#1{%
+\parseargdef\unmacro{%
   \if1\csname ismacro.#1\endcsname
     \global\cslet{#1}{macsave.#1}%
     \global\expandafter\let \csname ismacro.#1\endcsname=0%
@@ -5834,16 +5647,18 @@ width0pt\relax} \fi
 % @alias.
 % We need some trickery to remove the optional spaces around the equal
 % sign.  Just make them active and then expand them all to nothing.
-\def\alias{\begingroup\obeyspaces\parsearg\aliasxxx}
+\def\alias{\parseargusing\obeyspaces\aliasxxx}
 \def\aliasxxx #1{\aliasyyy#1\relax}
-\def\aliasyyy #1=#2\relax{\ignoreactivespaces
-\edef\next{\global\let\expandafter\noexpand\csname#1\endcsname=%
-           \expandafter\noexpand\csname#2\endcsname}%
-\expandafter\endgroup\next}
+\def\aliasyyy #1=#2\relax{%
+  {%
+    \expandafter\let\obeyedspace=\empty
+    \xdef\next{\global\let\makecsname{#1}=\makecsname{#2}}%
+  }%
+  \next
+}
 
 
 \message{cross references,}
-% @xref etc.
 
 \newwrite\auxfile
 
@@ -5855,64 +5670,62 @@ width0pt\relax} \fi
 \def\inforefzzz #1,#2,#3,#4**{\putwordSee{} \putwordInfo{} \putwordfile{} \file{\ignorespaces #3{}},
   node \samp{\ignorespaces#1{}}}
 
-% @node's job is to define \lastnode.
-\def\node{\ENVcheck\parsearg\nodezzz}
-\def\nodezzz#1{\nodexxx #1,\finishnodeparse}
+% @node's only job in TeX is to define \lastnode, which is used in
+% cross-references.
+\parseargdef\node{\checkenv{}\nodexxx #1,\finishnodeparse}
 \def\nodexxx#1,#2\finishnodeparse{\gdef\lastnode{#1}}
 \let\nwnode=\node
-\let\lastnode=\relax
-
-% The sectioning commands (@chapter, etc.) call these.
-\def\donoderef{%
-  \ifx\lastnode\relax\else
-    \expandafter\expandafter\expandafter\setref{\lastnode}%
-      {Ysectionnumberandtype}%
-    \global\let\lastnode=\relax
-  \fi
-}
-\def\unnumbnoderef{%
-  \ifx\lastnode\relax\else
-    \expandafter\expandafter\expandafter\setref{\lastnode}{Ynothing}%
-    \global\let\lastnode=\relax
+\let\lastnode=\empty
+
+% Write a cross-reference definition for the current node.  #1 is the
+% type (Ynumbered, Yappendix, Ynothing).
+% 
+\def\donoderef#1{%
+  \ifx\lastnode\empty\else
+    \setref{\lastnode}{#1}%
+    \global\let\lastnode=\empty
   \fi
 }
-\def\appendixnoderef{%
-  \ifx\lastnode\relax\else
-    \expandafter\expandafter\expandafter\setref{\lastnode}%
-      {Yappendixletterandtype}%
-    \global\let\lastnode=\relax
-  \fi
-}
-
 
 % @anchor{NAME} -- define xref target at arbitrary point.
 %
 \newcount\savesfregister
-\gdef\savesf{\relax \ifhmode \savesfregister=\spacefactor \fi}
-\gdef\restoresf{\relax \ifhmode \spacefactor=\savesfregister \fi}
-\gdef\anchor#1{\savesf \setref{#1}{Ynothing}\restoresf \ignorespaces}
+%
+\def\savesf{\relax \ifhmode \savesfregister=\spacefactor \fi}
+\def\restoresf{\relax \ifhmode \spacefactor=\savesfregister \fi}
+\def\anchor#1{\savesf \setref{#1}{Ynothing}\restoresf \ignorespaces}
 
 % \setref{NAME}{SNT} defines a cross-reference point NAME (a node or an
-% anchor), namely NAME-title (the corresponding @chapter/etc. name),
-% NAME-pg (the page number), and NAME-snt (section number and type).
-% Called from \foonoderef.
-%
-% We have to set \indexdummies so commands such as @code in a section
-% title aren't expanded.  It would be nicer not to expand the titles in
-% the first place, but there's so many layers that that is hard to do.
-%
-% Likewise, use \turnoffactive so that punctuation chars such as underscore
+% anchor), which consists of three parts:
+% 1) NAME-title - the current sectioning name, taken from \thissection;
+% 2) NAME-snt   - section number and type, defined as the SNT arg;
+% 3) NAME-pg    - the page number.
+% This is called from \donoderef, \anchor, and \dofloat.
+% 
+% We take care not to fully expand the title, since it may contain
+% arbitrary macros.
+%
+% Use \turnoffactive so that punctuation chars such as underscore
 % and backslash work in node names.
 %
-\def\setref#1#2{{%
-  \atdummies
+\def\setref#1#2{%
   \pdfmkdest{#1}%
-  %
-  \turnoffactive
-  \dosetq{#1-title}{Ytitle}%
-  \dosetq{#1-pg}{Ypagenumber}%
-  \dosetq{#1-snt}{#2}%
-}}
+  \iflinks
+    {%
+      \indexnofonts
+      \turnoffactive
+      \otherbackslash
+      \edef\writexrdef##1##2{%
+	\write\auxfile{@xrdef{#1-% #1 of \setref, expanded by the \edef
+	  ##1}{##2}}% these are parameters of \writexrdef
+      }%
+      \toks0 = \expandafter{\thissection}%
+      \immediate \writexrdef{title}{\the\toks0 }%
+      \immediate \writexrdef{snt}{\csname #2\endcsname}% \Ynumbered etc.
+      \writexrdef{pg}{\folio}% will be written later, during \shipout
+    }%
+  \fi
+}
 
 % @xref, @pxref, and @ref generate cross-references.  For \xrefX, #1 is
 % the node name, #2 the name of the Info cross-reference, #3 the printed
@@ -5925,38 +5738,33 @@ width0pt\relax} \fi
 \def\xrefX[#1,#2,#3,#4,#5,#6]{\begingroup
   \unsepspaces
   \def\printedmanual{\ignorespaces #5}%
-  \def\printednodename{\ignorespaces #3}%
-  \setbox1=\hbox{\printedmanual}%
-  \setbox0=\hbox{\printednodename}%
+  \def\printedrefname{\ignorespaces #3}%
+  \setbox1=\hbox{\printedmanual\unskip}%
+  \setbox0=\hbox{\printedrefname\unskip}%
   \ifdim \wd0 = 0pt
     % No printed node name was explicitly given.
     \expandafter\ifx\csname SETxref-automatic-section-title\endcsname\relax
       % Use the node name inside the square brackets.
-      \def\printednodename{\ignorespaces #1}%
+      \def\printedrefname{\ignorespaces #1}%
     \else
       % Use the actual chapter/section title appear inside
       % the square brackets.  Use the real section title if we have it.
       \ifdim \wd1 > 0pt
         % It is in another manual, so we don't have it.
-        \def\printednodename{\ignorespaces #1}%
+        \def\printedrefname{\ignorespaces #1}%
       \else
         \ifhavexrefs
           % We know the real title if we have the xref values.
-          \def\printednodename{\refx{#1-title}{}}%
+          \def\printedrefname{\refx{#1-title}{}}%
         \else
           % Otherwise just copy the Info node name.
-          \def\printednodename{\ignorespaces #1}%
+          \def\printedrefname{\ignorespaces #1}%
         \fi%
       \fi
     \fi
   \fi
   %
-  % If we use \unhbox0 and \unhbox1 to print the node names, TeX does not
-  % insert empty discretionaries after hyphens, which means that it will
-  % not find a line break at a hyphen in a node names.  Since some manuals
-  % are best written with fairly long node names, containing hyphens, this
-  % is a loss.  Therefore, we give the text of the node name again, so it
-  % is as if TeX is seeing it for the first time.
+  % Make link in pdf output.
   \ifpdf
     \leavevmode
     \getfilename{#4}%
@@ -5966,64 +5774,86 @@ width0pt\relax} \fi
          goto file{\the\filename.pdf} name{#1}%
      \else
        \startlink attr{/Border [0 0 0]}%
-         goto name{#1}%
+         goto name{\pdfmkpgn{#1}}%
      \fi
     }%
     \linkcolor
   \fi
   %
-  \ifdim \wd1 > 0pt
-    \putwordsection{} ``\printednodename'' \putwordin{} \cite{\printedmanual}%
-  \else
-    % _ (for example) has to be the character _ for the purposes of the
-    % control sequence corresponding to the node, but it has to expand
-    % into the usual \leavevmode...\vrule stuff for purposes of
-    % printing. So we \turnoffactive for the \refx-snt, back on for the
-    % printing, back off for the \refx-pg.
-    {\turnoffactive \otherbackslash
-     % Only output a following space if the -snt ref is nonempty; for
-     % @unnumbered and @anchor, it won't be.
-     \setbox2 = \hbox{\ignorespaces \refx{#1-snt}{}}%
-     \ifdim \wd2 > 0pt \refx{#1-snt}\space\fi
-    }%
-    % output the `[mynode]' via a macro.
-    \xrefprintnodename\printednodename
-    %
-    % But we always want a comma and a space:
-    ,\space
+  % Float references are printed completely differently: "Figure 1.2"
+  % instead of "[somenode], p.3".  We distinguish them by the
+  % LABEL-title being set to a magic string.
+  {%
+    % Have to otherify everything special to allow the \csname to
+    % include an _ in the xref name, etc.
+    \indexnofonts
+    \turnoffactive
+    \otherbackslash
+    \expandafter\global\expandafter\let\expandafter\Xthisreftitle
+      \csname X#1-title\endcsname
+  }%
+  \ifx \Xthisreftitle \floatmagic
+    % If the user specified the print name (third arg) to the ref,
+    % print it instead of our usual "Figure 1.2".
+    \ifdim\wd0 = 0pt
+      \refx{#1-snt}%
+    \else
+      \printedrefname
+    \fi
     %
-    % output the `page 3'.
-    \turnoffactive \otherbackslash \putwordpage\tie\refx{#1-pg}{}%
+    % if the user also gave the printed manual name (fifth arg), append
+    % "in MANUALNAME". 
+    \ifdim \wd1 > 0pt
+      \space \putwordin{} \cite{\printedmanual}%
+    \fi
+  \else
+    % node/anchor (non-float) references.
+    % 
+    % If we use \unhbox0 and \unhbox1 to print the node names, TeX does not
+    % insert empty discretionaries after hyphens, which means that it will
+    % not find a line break at a hyphen in a node names.  Since some manuals
+    % are best written with fairly long node names, containing hyphens, this
+    % is a loss.  Therefore, we give the text of the node name again, so it
+    % is as if TeX is seeing it for the first time.
+    \ifdim \wd1 > 0pt
+      \putwordsection{} ``\printedrefname'' \putwordin{} \cite{\printedmanual}%
+    \else
+      % _ (for example) has to be the character _ for the purposes of the
+      % control sequence corresponding to the node, but it has to expand
+      % into the usual \leavevmode...\vrule stuff for purposes of
+      % printing. So we \turnoffactive for the \refx-snt, back on for the
+      % printing, back off for the \refx-pg.
+      {\turnoffactive \otherbackslash
+       % Only output a following space if the -snt ref is nonempty; for
+       % @unnumbered and @anchor, it won't be.
+       \setbox2 = \hbox{\ignorespaces \refx{#1-snt}{}}%
+       \ifdim \wd2 > 0pt \refx{#1-snt}\space\fi
+      }%
+      % output the `[mynode]' via a macro so it can be overridden.
+      \xrefprintnodename\printedrefname
+      %
+      % But we always want a comma and a space:
+      ,\space
+      %
+      % output the `page 3'.
+      \turnoffactive \otherbackslash \putwordpage\tie\refx{#1-pg}{}%
+    \fi
   \fi
   \endlink
 \endgroup}
 
 % This macro is called from \xrefX for the `[nodename]' part of xref
 % output.  It's a separate macro only so it can be changed more easily,
-% since not square brackets don't work in some documents.  Particularly
+% since square brackets don't work well in some documents.  Particularly
 % one that Bob is working on :).
 %
 \def\xrefprintnodename#1{[#1]}
 
-% \dosetq is called from \setref to do the actual \write (\iflinks).
+% Things referred to by \setref.
 %
-\def\dosetq#1#2{%
-  {\let\folio=0%
-   \edef\next{\write\auxfile{\internalsetq{#1}{#2}}}%
-   \iflinks \next \fi
-  }%
-}
-
-% \internalsetq{foo}{page} expands into
-%   CHARACTERS @xrdef{foo}{...expansion of \page...}
-\def\internalsetq#1#2{@xrdef{#1}{\csname #2\endcsname}}
-
-% Things to be expanded by \internalsetq.
-%
-\def\Ypagenumber{\folio}
-\def\Ytitle{\thissection}
 \def\Ynothing{}
-\def\Ysectionnumberandtype{%
+\def\Yomitfromtoc{}
+\def\Ynumbered{%
   \ifnum\secno=0
     \putwordChapter@tie \the\chapno
   \else \ifnum\subsecno=0
@@ -6034,8 +5864,7 @@ width0pt\relax} \fi
     \putwordSection@tie \the\chapno.\the\secno.\the\subsecno.\the\subsubsecno
   \fi\fi\fi
 }
-
-\def\Yappendixletterandtype{%
+\def\Yappendix{%
   \ifnum\secno=0
      \putwordAppendix@tie @char\the\appendixno{}%
   \else \ifnum\subsecno=0
@@ -6048,15 +5877,6 @@ width0pt\relax} \fi
   \fi\fi\fi
 }
 
-% Use TeX 3.0's \inputlineno to get the line number, for better error
-% messages, but if we're using an old version of TeX, don't do anything.
-%
-\ifx\inputlineno\thisisundefined
-  \let\linenumber = \empty % Pre-3.0.
-\else
-  \def\linenumber{\the\inputlineno:\space}
-\fi
-
 % Define \refx{NAME}{SUFFIX} to reference a cross-reference string named NAME.
 % If its value is nonempty, SUFFIX is output afterward.
 %
@@ -6092,6 +5912,16 @@ width0pt\relax} \fi
 \def\xrdef#1{\expandafter\gdef\csname X#1\endcsname}
 
 % Read the last existing aux file, if any.  No error if none exists.
+% 
+\def\tryauxfile{%
+  \openin 1 \jobname.aux
+  \ifeof 1 \else
+    \readauxfile
+    \global\havexrefstrue
+  \fi
+  \closein 1
+}
+
 \def\readauxfile{\begingroup
   \catcode`\^^@=\other
   \catcode`\^^A=\other
@@ -6160,31 +5990,17 @@ width0pt\relax} \fi
     }%
   }%
   %
-  % Turn off \ as an escape so we do not lose on
-  % entries which were dumped with control sequences in their names.
-  % For example, @xrdef{$\leq $-fun}{page ...} made by @defun ^^
-  % Reference to such entries still does not work the way one would wish,
-  % but at least they do not bomb out when the aux file is read in.
-  \catcode`\\=\other
-  %
   % @ is our escape character in .aux files.
   \catcode`\{=1
   \catcode`\}=2
   \catcode`\@=0
   %
-  \openin 1 \jobname.aux
-  \ifeof 1 \else
-    \closein 1
-    \input \jobname.aux
-    \global\havexrefstrue
-    \global\warnedobstrue
-  \fi
-  % Open the new aux file.  TeX will close it automatically at exit.
-  \openout\auxfile=\jobname.aux
+  \input \jobname.aux
 \endgroup}
 
 
-% Footnotes.
+\message{insertions,}
+% including footnotes.
 
 \newcount \footnoteno
 
@@ -6198,13 +6014,12 @@ width0pt\relax} \fi
 % @footnotestyle is meaningful for info output only.
 \let\footnotestyle=\comment
 
-\let\ptexfootnote=\footnote
-
 {\catcode `\@=11
 %
 % Auto-number footnotes.  Otherwise like plain.
 \gdef\footnote{%
   \let\indent=\ptexindent
+  \let\noindent=\ptexnoindent
   \global\advance\footnoteno by \@ne
   \edef\thisfootno{$^{\the\footnoteno}$}%
   %
@@ -6222,17 +6037,12 @@ width0pt\relax} \fi
 % Don't bother with the trickery in plain.tex to not require the
 % footnote text as a parameter.  Our footnotes don't need to be so general.
 %
-% Oh yes, they do; otherwise, @ifset and anything else that uses
-% \parseargline fail inside footnotes because the tokens are fixed when
+% Oh yes, they do; otherwise, @ifset (and anything else that uses
+% \parseargline) fails inside footnotes because the tokens are fixed when
 % the footnote is read.  --karl, 16nov96.
 %
-% The start of the footnote looks usually like this:
-\gdef\startfootins{\insert\footins\bgroup}
-%
-% ... but this macro is redefined inside @multitable.
-%
 \gdef\dofootnote{%
-  \startfootins
+  \insert\footins\bgroup
   % We want to typeset this text as a normal paragraph, even if the
   % footnote reference occurs in (for example) a display environment.
   % So reset some parameters.
@@ -6268,40 +6078,66 @@ width0pt\relax} \fi
 }
 }%end \catcode `\@=11
 
-% @| inserts a changebar to the left of the current line.  It should
-% surround any changed text.  This approach does *not* work if the
-% change spans more than two lines of output.  To handle that, we would
-% have adopt a much more difficult approach (putting marks into the main
-% vertical list for the beginning and end of each change).
+% In case a @footnote appears in a vbox, save the footnote text and create
+% the real \insert just after the vbox finished.  Otherwise, the insertion
+% would be lost.
+% Similarily, if a @footnote appears inside an alignment, save the footnote
+% text to a box and make the \insert when a row of the table is finished.
+% And the same can be done for other insert classes.  --kasal, 16nov03.
+
+% Replace the \insert primitive by a cheating macro.
+% Deeper inside, just make sure that the saved insertions are not spilled
+% out prematurely.
 %
-\def\|{%
-  % \vadjust can only be used in horizontal mode.
-  \leavevmode
-  %
-  % Append this vertical mode material after the current line in the output.
-  \vadjust{%
-    % We want to insert a rule with the height and depth of the current
-    % leading; that is exactly what \strutbox is supposed to record.
-    \vskip-\baselineskip
-    %
-    % \vadjust-items are inserted at the left edge of the type.  So
-    % the \llap here moves out into the left-hand margin.
-    \llap{%
-      %
-      % For a thicker or thinner bar, change the `1pt'.
-      \vrule height\baselineskip width1pt
-      %
-      % This is the space between the bar and the text.
-      \hskip 12pt
-    }%
-  }%
+\def\startsavinginserts{%
+  \ifx \insert\ptexinsert
+    \let\insert\saveinsert
+  \else
+    \let\checkinserts\relax
+  \fi
 }
 
-% For a final copy, take out the rectangles
-% that mark overfull boxes (in case you have decided
-% that the text looks ok even though it passes the margin).
+% This \insert replacements works for both \insert\footins{xx} and
+% \insert\footins\bgroup xx\egroup, but it doesn't work for \insert27{xx}.
 %
-\def\finalout{\overfullrule=0pt}
+\def\saveinsert#1{%
+  \edef\next{\noexpand\savetobox \makeSAVEname#1}%
+  \afterassignment\next
+  % swallow the left brace
+  \let\temp =
+}
+\def\makeSAVEname#1{\makecsname{SAVE\expandafter\gobble\string#1}}
+\def\savetobox#1{\global\setbox#1 = \vbox\bgroup \unvbox#1}
+
+\def\checksaveins#1{\ifvoid#1\else \placesaveins#1\fi}
+
+\def\placesaveins#1{%
+  \ptexinsert \csname\expandafter\gobblesave\string#1\endcsname
+    {\box#1}%
+}
+
+% eat @SAVE -- beware, all of them have catcode \other:
+{
+  \def\dospecials{\do S\do A\do V\do E} \uncatcodespecials  %  ;-)
+  \gdef\gobblesave @SAVE{}
+}
+
+% initialization:
+\def\newsaveins #1{%
+  \edef\next{\noexpand\newsaveinsX \makeSAVEname#1}%
+  \next
+}
+\def\newsaveinsX #1{%
+  \csname newbox\endcsname #1%
+  \expandafter\def\expandafter\checkinserts\expandafter{\checkinserts
+    \checksaveins #1}%
+}
+
+% initialize:
+\let\checkinserts\empty
+\newsaveins\footins
+\newsaveins\margin
+
 
 % @image.  We use the macros from epsf.tex to support this.
 % If epsf.tex is not installed and @image is used, we complain.
@@ -6311,12 +6147,12 @@ width0pt\relax} \fi
 % undone and the next image would fail.
 \openin 1 = epsf.tex
 \ifeof 1 \else
-  \closein 1
   % Do not bother showing banner with epsf.tex v2.7k (available in
   % doc/epsf.tex and on ctan).
   \def\epsfannounce{\toks0 = }%
   \input epsf.tex
 \fi
+\closein 1
 %
 % We will only complain once about lack of epsf.tex.
 \newif\ifwarnednoepsf
@@ -6372,6 +6208,129 @@ width0pt\relax} \fi
 \endgroup}
 
 
+% @float FLOATTYPE,LOC ... @end float for displayed figures, tables, etc.
+% We don't actually implement floating yet, we just plop the float "here".
+% But it seemed the best name for the future.
+% 
+\envparseargdef\float{\dofloat #1,,,\finish}
+
+% #1 is the optional FLOATTYPE, the text label for this float, typically
+% "Figure", "Table", "Example", etc.  Can't contain commas.  If omitted,
+% this float will not be numbered and cannot be referred to.
+% 
+% #2 is the optional xref label.  Also must be present for the float to
+% be referable.
+% 
+% #3 is the optional positioning argument; for now, it is ignored.  It
+% will somehow specify the positions allowed to float to (here, top, bottom).
+% 
+% We keep a separate counter for each FLOATTYPE, which we reset at each
+% chapter-level command.
+\let\resetallfloatnos=\empty
+%
+\def\dofloat#1,#2,#3,#4\finish{%
+  % don't lose footnotes inside @float.
+  \startsavinginserts
+  %
+  \vtop\bgroup
+    \def\floattype{#1}%
+    \def\floatlabel{#2}%
+    \def\floatloc{#3}% we do nothing with this yet.
+    % xx should we indent the whole thing? center it?
+    %
+    \ifx\floattype\empty \else
+      % For now, assume the FLOATTYPE is entirely letters, so we just use it
+      % in a control sequence name literally.  We want each FLOATTYPE to be
+      % numbered separately (Figure 1, Table 1, Figure 2, ...).
+      \expandafter\getfloatno\csname\floattype floatno\endcsname
+      \global\advance\floatno by 1
+      %
+      \ifx\floatlabel\empty \else
+	{%
+	  % This magic value for \thissection is output by \setref as the
+	  % XREFLABEL-title value.  \xrefX uses it to distinguish float
+	  % labels (which have a completely different output format) from
+	  % nodes and xref labels.
+	  % 
+	  \let\thissection=\floatmagic
+	  \setref{\floatlabel}{Yfloat}%
+	}%
+      \fi
+    \fi
+}
+
+% we have four possibilities:
+% @float Foo & @caption{Cap}: Foo 1.1: Cap
+% @float Foo & no caption:    Foo 1.1
+% @float & @caption{Cap}:     Cap
+% @float & no caption:
+%
+\def\Efloat{%
+    \let\printedsomething = \empty
+    %
+    \ifx\floattype\empty \else
+      \vskip.5\parskip  % space above caption
+      %
+      % Print the float number preceded by the chapter-level number
+      % (empty in the case of unnumbered).  Although there are other
+      % styles of float numbering, we hardwire this one.
+      \floattype\space\chaplevelprefix\the\floatno
+      \let\printedsomething = t%
+    \fi
+    %
+    \ifx\thiscaption\empty \else
+      \ifx\printedsomething\empty
+	\vskip.5\parskip  % space above caption
+      \else
+	:\space  % had a number, so print a colon.
+      \fi
+      %
+      % Print caption text.
+      \thiscaption
+      \let\printedsomething = t%
+    \fi
+    %
+    % Space below caption, if we printed anything.
+    \ifx\printedsomething\empty \else \vskip\parskip \fi
+    %
+  \egroup  % end of \vtop
+  \checkinserts
+}
+
+\def\caption#1{\checkenv\float \def\thiscaption{#1}}
+\def\shortcaption#1{\checkenv\float \def\thisshortcaption{#1}}
+\let\thiscaption=\empty
+\let\thisshortcaption=\empty
+
+% The parameter is the control sequence identifying the counter we are
+% going to use.  Create it if it doesn't exist and assign it to \floatno.
+\def\getfloatno#1{%
+  \ifx#1\relax
+      % Haven't seen this figure type before.
+      \csname newcount\endcsname #1%
+      %
+      % Remember to reset this floatno at the next chap.
+      \expandafter\gdef\expandafter\resetallfloatnos
+        \expandafter{\resetallfloatnos #1=0 }%
+  \fi
+  \let\floatno#1%
+}
+
+% \setref calls this to get the XREFLABEL-snt value.  We want an @xref
+% to the FLOATLABEL to expand to "Figure 3.1".  We call \setref when we
+% first read the @float command.
+% 
+\def\Yfloat{\floattype @tie{}\chaplevelprefix\the\floatno}%
+
+% Magic string used for the XREFLABEL-title value, so \xrefX can
+% distinguish floats from other xref types.
+\def\floatmagic{!!float!!}
+
+% @listoffloats FLOATTYPE - print a list of floats like a table of contents.
+\parseargdef\listoffloats{%xx
+}
+
+
 \message{localization,}
 % and i18n.
 
@@ -6380,19 +6339,17 @@ width0pt\relax} \fi
 % properly.  Single argument is the language abbreviation.
 % It would be nice if we could set up a hyphenation file here.
 %
-\def\documentlanguage{\parsearg\dodocumentlanguage}
-\def\dodocumentlanguage#1{%
+\parseargdef\documentlanguage{%
   \tex % read txi-??.tex file in plain TeX.
-  % Read the file if it exists.
-  \openin 1 txi-#1.tex
-  \ifeof1
-    \errhelp = \nolanghelp
-    \errmessage{Cannot read language file txi-#1.tex}%
-    \let\temp = \relax
-  \else
-    \def\temp{\input txi-#1.tex }%
-  \fi
-  \temp
+    % Read the file if it exists.
+    \openin 1 txi-#1.tex
+    \ifeof 1
+      \errhelp = \nolanghelp
+      \errmessage{Cannot read language file txi-#1.tex}%
+    \else
+      \input txi-#1.tex
+    \fi
+    \closein 1
   \endgroup
 }
 \newhelp\nolanghelp{The given language definition file cannot be found or
@@ -6575,8 +6532,7 @@ should work if nowhere else does.}
 % Perhaps we should allow setting the margins, \topskip, \parskip,
 % and/or leading, also. Or perhaps we should compute them somehow.
 %
-\def\pagesizes{\parsearg\pagesizesxxx}
-\def\pagesizesxxx#1{\pagesizesyyy #1,,\finish}
+\parseargdef\pagesizes{\pagesizesyyy #1,,\finish}
 \def\pagesizesyyy#1,#2,#3\finish{{%
   \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \hsize=#2\relax \fi
   \globaldefs = 1
@@ -6623,8 +6579,8 @@ should work if nowhere else does.}
 \def\normalplus{+}
 \def\normaldollar{$}%$ font-lock fix
 
-% This macro is used to make a character print one way in ttfont
-% where it can probably just be output, and another way in other fonts,
+% This macro is used to make a character print one way in \tt
+% (where it can probably be output as-is), and another way in other fonts,
 % where something hairier probably needs to be done.
 %
 % #1 is what to print if we are indeed using \tt; #2 is what to print
@@ -6672,13 +6628,6 @@ should work if nowhere else does.}
 \catcode`\$=\active
 \def${\ifusingit{{\sl\$}}\normaldollar}%$ font-lock fix
 
-% Set up an active definition for =, but don't enable it most of the time.
-{\catcode`\==\active
-\global\def={{\tt \char 61}}}
-
-\catcode`+=\active
-\catcode`\_=\active
-
 % If a .fmt file is being used, characters that might appear in a file
 % name cannot be active until we have parsed the command line.
 % So turn them off again, and have \everyjob (or @setfilename) turn them on.
@@ -6720,6 +6669,7 @@ should work if nowhere else does.}
   @let>=@normalgreater
   @let+=@normalplus
   @let$=@normaldollar %$ font-lock fix
+  @unsepspaces
 }
 
 % Same as @turnoffactive except outputs \ as {\tt\char`\\} instead of
@@ -6759,10 +6709,6 @@ should work if nowhere else does.}
 @catcode`@# = @other
 @catcode`@% = @other
 
-@c Set initial fonts.
-@textfonts
-@rm
-
 
 @c Local variables:
 @c eval: (add-hook 'write-file-hooks 'time-stamp)
@@ -6771,3 +6717,9 @@ should work if nowhere else does.}
 @c time-stamp-format: "%:y-%02m-%02d.%02H"
 @c time-stamp-end: "}"
 @c End:
+
+@c vim:sw=2:
+
+@ignore
+   arch-tag: e1b36e32-c96e-4135-a41a-0b2efa2ea115
+@end ignore