acinclude.m4: Include libtool macros from the top level.

* acinclude.m4: Include libtool macros from the top level.
* aclocal.m4, configure: Rebuilt.

From-SVN: r36287

1 files changed, 6 insertions, 409 deletions

diff --git a/boehm-gc/aclocal.m4 b/boehm-gc/aclocal.m4
index a0f394f..15266a9 100644
--- a/boehm-gc/aclocal.m4
+++ b/boehm-gc/aclocal.m4
@@ -168,6 +168,12 @@ AC_SUBST(BOEHM_GC_CFLAGS)
 
 ))))
 
+sinclude(../libtool.m4)
+dnl The line below arranges for aclocal not to bring a definition of
+dnl AM_PROG_LIBTOOL into aclocal.m4, while still arranging for automake
+dnl to add a definition of LIBTOOL to Makefile.in.
+ifelse(yes,no,[AC_DEFUN([AM_PROG_LIBTOOL],[AC_SUBST(LIBTOOL)])])
+
 # Do all the work for Automake.  This macro actually does too much --
 # some checks are only needed if your package does certain things.
 # But this isn't really a big deal.
@@ -293,412 +299,3 @@ else
   $1_FALSE=
 fi])
 
-
-# serial 40 AC_PROG_LIBTOOL
-AC_DEFUN(AC_PROG_LIBTOOL,
-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
-
-# Save cache, so that ltconfig can load it
-AC_CACHE_SAVE
-
-# Actually configure libtool.  ac_aux_dir is where install-sh is found.
-CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
-DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
-|| AC_MSG_ERROR([libtool configure failed])
-
-# Reload cache, that may have been modified by ltconfig
-AC_CACHE_LOAD
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-AC_SUBST(LIBTOOL)dnl
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-AC_DEFUN(AC_LIBTOOL_SETUP,
-[AC_PREREQ(2.13)dnl
-AC_REQUIRE([AC_ENABLE_SHARED])dnl
-AC_REQUIRE([AC_ENABLE_STATIC])dnl
-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_REQUIRE([AC_PROG_RANLIB])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_PROG_LD])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([AC_PROG_LN_S])dnl
-dnl
-
-case "$target" in
-NONE) lt_target="$host" ;;
-*) lt_target="$target" ;;
-esac
-
-# Check for any special flags to pass to ltconfig.
-libtool_flags="--cache-file=$cache_file"
-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
-ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
-[libtool_flags="$libtool_flags --enable-dlopen"])
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[libtool_flags="$libtool_flags --enable-win32-dll"])
-AC_ARG_ENABLE(libtool-lock,
-  [  --disable-libtool-lock  avoid locking (might break parallel builds)])
-test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
-test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case "$lt_target" in
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case "`/usr/bin/file conftest.o`" in
-    *32-bit*)
-      LD="${LD-ld} -32"
-      ;;
-    *N32*)
-      LD="${LD-ld} -n32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
-    [AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])])
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
-
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[*-*-cygwin* | *-*-mingw*)
-  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-  AC_CHECK_TOOL(AS, as, false)
-  AC_CHECK_TOOL(OBJDUMP, objdump, false)
-  ;;
-])
-esac
-])
-
-# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
-AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
-
-# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
-AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
-
-# AC_ENABLE_SHARED - implement the --enable-shared flag
-# Usage: AC_ENABLE_SHARED[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN(AC_ENABLE_SHARED, [dnl
-define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(shared,
-changequote(<<, >>)dnl
-<<  --enable-shared[=PKGS]  build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case "$enableval" in
-yes) enable_shared=yes ;;
-no) enable_shared=no ;;
-*)
-  enable_shared=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_shared=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
-])
-
-# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
-AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_SHARED(no)])
-
-# AC_ENABLE_STATIC - implement the --enable-static flag
-# Usage: AC_ENABLE_STATIC[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN(AC_ENABLE_STATIC, [dnl
-define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(static,
-changequote(<<, >>)dnl
-<<  --enable-static[=PKGS]  build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case "$enableval" in
-yes) enable_static=yes ;;
-no) enable_static=no ;;
-*)
-  enable_static=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_static=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
-])
-
-# AC_DISABLE_STATIC - set the default static flag to --disable-static
-AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_STATIC(no)])
-
-
-# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
-# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl
-define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(fast-install,
-changequote(<<, >>)dnl
-<<  --enable-fast-install[=PKGS]  optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case "$enableval" in
-yes) enable_fast_install=yes ;;
-no) enable_fast_install=no ;;
-*)
-  enable_fast_install=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_fast_install=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
-])
-
-# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
-AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_FAST_INSTALL(no)])
-
-# AC_PROG_LD - find the path to the GNU or non-GNU linker
-AC_DEFUN(AC_PROG_LD,
-[AC_ARG_WITH(gnu-ld,
-[  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]],
-test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-ac_prog=ld
-if test "$ac_cv_prog_gcc" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  AC_MSG_CHECKING([for ld used by GCC])
-  ac_prog=`($CC -print-prog-name=ld) 2>&5`
-  case "$ac_prog" in
-    # Accept absolute paths.
-changequote(,)dnl
-    [\\/]* | [A-Za-z]:[\\/]*)
-      re_direlt='/[^/][^/]*/\.\./'
-changequote([,])dnl
-      # Canonicalize the path of ld
-      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  AC_MSG_CHECKING([for GNU ld])
-else
-  AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(ac_cv_path_LD,
-[if test -z "$LD"; then
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      ac_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some GNU ld's only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
-	test "$with_gnu_ld" != no && break
-      else
-	test "$with_gnu_ld" != yes && break
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-else
-  ac_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$ac_cv_path_LD"
-if test -n "$LD"; then
-  AC_MSG_RESULT($LD)
-else
-  AC_MSG_RESULT(no)
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_PROG_LD_GNU
-])
-
-AC_DEFUN(AC_PROG_LD_GNU,
-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
-  ac_cv_prog_gnu_ld=yes
-else
-  ac_cv_prog_gnu_ld=no
-fi])
-])
-
-# AC_PROG_NM - find the path to a BSD-compatible name lister
-AC_DEFUN(AC_PROG_NM,
-[AC_MSG_CHECKING([for BSD-compatible nm])
-AC_CACHE_VAL(ac_cv_path_NM,
-[if test -n "$NM"; then
-  # Let the user override the test.
-  ac_cv_path_NM="$NM"
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
-      # Check to see if the nm accepts a BSD-compat flag.
-      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-      #   nm: unknown option "B" ignored
-      if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	ac_cv_path_NM="$ac_dir/nm -B"
-	break
-      elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	ac_cv_path_NM="$ac_dir/nm -p"
-	break
-      else
-	ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
-	continue # so that we can try to find one that supports BSD flags
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
-fi])
-NM="$ac_cv_path_NM"
-AC_MSG_RESULT([$NM])
-])
-
-# AC_CHECK_LIBM - check for math library
-AC_DEFUN(AC_CHECK_LIBM,
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-LIBM=
-case "$lt_target" in
-*-*-beos* | *-*-cygwin*)
-  # These system don't have libm
-  ;;
-*-ncr-sysv4.3*)
-  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
-  AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
-  ;;
-*)
-  AC_CHECK_LIB(m, main, LIBM="-lm")
-  ;;
-esac
-])
-
-# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl convenience library, adds --enable-ltdl-convenience to
-# the configure arguments.  Note that LIBLTDL is not AC_SUBSTed, nor
-# is AC_CONFIG_SUBDIRS called.  If DIR is not provided, it is assumed
-# to be `${top_builddir}/libltdl'.  Make sure you start DIR with
-# '${top_builddir}/' (note the single quotes!) if your package is not
-# flat, and, if you're not using automake, define top_builddir as
-# appropriate in the Makefiles.
-AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  case "$enable_ltdl_convenience" in
-  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
-  "") enable_ltdl_convenience=yes
-      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
-  esac
-  LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdlc.la
-  INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
-])
-
-# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl installable library, and adds --enable-ltdl-install to
-# the configure arguments.  Note that LIBLTDL is not AC_SUBSTed, nor
-# is AC_CONFIG_SUBDIRS called.  If DIR is not provided, it is assumed
-# to be `${top_builddir}/libltdl'.  Make sure you start DIR with
-# '${top_builddir}/' (note the single quotes!) if your package is not
-# flat, and, if you're not using automake, define top_builddir as
-# appropriate in the Makefiles.
-# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  AC_CHECK_LIB(ltdl, main,
-  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
-  [if test x"$enable_ltdl_install" = xno; then
-     AC_MSG_WARN([libltdl not installed, but installation disabled])
-   else
-     enable_ltdl_install=yes
-   fi
-  ])
-  if test x"$enable_ltdl_install" = x"yes"; then
-    ac_configure_args="$ac_configure_args --enable-ltdl-install"
-    LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la
-    INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
-  else
-    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
-    LIBLTDL="-lltdl"
-    INCLTDL=
-  fi
-])
-
-dnl old names
-AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl
-AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl
-AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl
-AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl
-AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl
-AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl
-AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl
-
-dnl This is just to silence aclocal about the macro not being used
-ifelse([AC_DISABLE_FAST_INSTALL])dnl
-