gcc.texi, [...]: Remove old system-specific installation documentation.

	* doc/gcc.texi, doc/install-old.texi: Remove old system-specific
	installation documentation.
	* doc/install.texi: Move it to here.

From-SVN: r42816

4 files changed, 1236 insertions, 986 deletions

diff --git a/gcc/ChangeLog b/gcc/ChangeLog
index 76bffd2..4ebc445 100644
--- a/gcc/ChangeLog
+++ b/gcc/ChangeLog
@@ -1,5 +1,11 @@
 2001-06-02  Joseph S. Myers  <jsm28@cam.ac.uk>
 
+	* doc/gcc.texi, doc/install-old.texi: Remove old system-specific
+	installation documentation.
+	* doc/install.texi: Move it to here.
+
+2001-06-02  Joseph S. Myers  <jsm28@cam.ac.uk>
+
 	* doc/install.texi: Clean up Texinfo markup.
 
 2001-06-02  Joseph S. Myers  <jsm28@cam.ac.uk>
diff --git a/gcc/doc/gcc.texi b/gcc/doc/gcc.texi
index 67ca575..b7fa196 100644
--- a/gcc/doc/gcc.texi
+++ b/gcc/doc/gcc.texi
@@ -512,7 +512,6 @@ where people's opinions differ as to what is best.
 
 @menu
 * Actual Bugs::		      Bugs we will fix later.
-* Installation Problems::     Problems that manifest when you install GCC.
 * Cross-Compiler Problems::   Common problems of cross compiling with GCC.
 * Interoperation::      Problems using GCC with other compilers,
 			   and with certain linkers, assemblers and debuggers.
@@ -553,292 +552,6 @@ an error message when a function name is specified in an expression
 involving the comma operator.
 @end itemize
 
-@node Installation Problems
-@section Installation Problems
-
-This is a list of problems (and some apparent problems which don't
-really mean anything is wrong) that show up during installation of GNU
-CC.
-
-@itemize @bullet
-@item
-On certain systems, defining certain environment variables such as
-@code{CC} can interfere with the functioning of @code{make}.
-
-@item
-If you encounter seemingly strange errors when trying to build the
-compiler in a directory other than the source directory, it could be
-because you have previously configured the compiler in the source
-directory.  Make sure you have done all the necessary preparations.
-@xref{Other Dir}.
-
-@item
-If you build GCC on a BSD system using a directory stored in a System
-V file system, problems may occur in running @code{fixincludes} if the
-System V file system doesn't support symbolic links.  These problems
-result in a failure to fix the declaration of @code{size_t} in
-@file{sys/types.h}.  If you find that @code{size_t} is a signed type and
-that type mismatches occur, this could be the cause.
-
-The solution is not to use such a directory for building GCC.
-
-@item
-Some commands executed when making the compiler may fail (return a
-non-zero status) and be ignored by @code{make}.  These failures, which
-are often due to files that were not found, are expected, and can safely
-be ignored.
-
-@item
-It is normal to have warnings in compiling certain files about
-unreachable code and about enumeration type clashes.  These files' names
-begin with @samp{insn-}.  Also, @file{real.c} may get some warnings that
-you can ignore.
-
-@item
-Sometimes @code{make} recompiles parts of the compiler when installing
-the compiler.  In one case, this was traced down to a bug in
-@code{make}.  Either ignore the problem or switch to GNU Make.
-
-@item
-On GNU/Linux SLS 1.01, there is a problem with @file{libc.a}: it does not
-contain the obstack functions.  However, GCC assumes that the obstack
-functions are in @file{libc.a} when it is the GNU C library.  To work
-around this problem, change the @code{__GNU_LIBRARY__} conditional
-around line 31 to @samp{#if 1}.
-
-@item
-On SCO systems, when compiling GCC with the system's compiler,
-do not use @samp{-O}.  Some versions of the system's compiler miscompile
-GCC with @samp{-O}.
-
-@cindex @code{genflags}, crash on Sun 4
-@item
-Sometimes on a Sun 4 you may observe a crash in the program
-@code{genflags} or @code{genoutput} while building GCC.  This is said to
-be due to a bug in @code{sh}.  You can probably get around it by running
-@code{genflags} or @code{genoutput} manually and then retrying the
-@code{make}.
-
-@item
-On Solaris 2, executables of GCC version 2.0.2 are commonly
-available, but they have a bug that shows up when compiling current
-versions of GCC: undefined symbol errors occur during assembly if you
-use @samp{-g}.
-
-The solution is to compile the current version of GCC without
-@samp{-g}.  That makes a working compiler which you can use to recompile
-with @samp{-g}.
-
-@item
-Solaris 2 comes with a number of optional OS packages.  Some of these
-packages are needed to use GCC fully.  If you did not install all
-optional packages when installing Solaris, you will need to verify that
-the packages that GCC needs are installed.
-
-To check whether an optional package is installed, use
-the @code{pkginfo} command.  To add an optional package, use the
-@code{pkgadd} command.  For further details, see the Solaris
-documentation.
-
-For Solaris 2.0 and 2.1, GCC needs six packages: @samp{SUNWarc},
-@samp{SUNWbtool}, @samp{SUNWesu}, @samp{SUNWhea}, @samp{SUNWlibm}, and
-@samp{SUNWtoo}.
-
-For Solaris 2.2, GCC needs an additional seventh package: @samp{SUNWsprot}.
-
-@item
-On Solaris 2, trying to use the linker and other tools in
-@file{/usr/ucb} to install GCC has been observed to cause trouble.
-For example, the linker may hang indefinitely.  The fix is to remove
-@file{/usr/ucb} from your @code{PATH}.
-
-@item
-If you use the 1.31 version of the MIPS assembler (such as was shipped
-with Ultrix 3.1), you will need to use the -fno-delayed-branch switch
-when optimizing floating point code.  Otherwise, the assembler will
-complain when the GCC compiler fills a branch delay slot with a
-floating point instruction, such as @code{add.d}.
-
-@item
-If on a MIPS system you get an error message saying ``does not have gp
-sections for all it's [sic] sectons [sic]'', don't worry about it.  This
-happens whenever you use GAS with the MIPS linker, but there is not
-really anything wrong, and it is okay to use the output file.  You can
-stop such warnings by installing the GNU linker.
-
-It would be nice to extend GAS to produce the gp tables, but they are
-optional, and there should not be a warning about their absence.
-
-@item
-Users have reported some problems with version 2.0 of the MIPS
-compiler tools that were shipped with Ultrix 4.1.  Version 2.10
-which came with Ultrix 4.2 seems to work fine.
-
-Users have also reported some problems with version 2.20 of the
-MIPS compiler tools that were shipped with RISC/os 4.x.  The earlier
-version 2.11 seems to work fine.
-
-@item
-Some versions of the MIPS linker will issue an assertion failure
-when linking code that uses @code{alloca} against shared
-libraries on RISC-OS 5.0, and DEC's OSF/1 systems.  This is a bug
-in the linker, that is supposed to be fixed in future revisions.
-To protect against this, GCC passes @samp{-non_shared} to the
-linker unless you pass an explicit @samp{-shared} or
-@samp{-call_shared} switch.
-
-@item
-On System V release 3, you may get this error message
-while linking:
-
-@smallexample
-ld fatal: failed to write symbol name @var{something}
- in strings table for file @var{whatever}
-@end smallexample
-
-This probably indicates that the disk is full or your ULIMIT won't allow
-the file to be as large as it needs to be.
-
-This problem can also result because the kernel parameter @code{MAXUMEM}
-is too small.  If so, you must regenerate the kernel and make the value
-much larger.  The default value is reported to be 1024; a value of 32768
-is said to work.  Smaller values may also work.
-
-@item
-On System V, if you get an error like this,
-
-@example
-/usr/local/lib/bison.simple: In function `yyparse':
-/usr/local/lib/bison.simple:625: virtual memory exhausted
-@end example
-
-@noindent
-that too indicates a problem with disk space, ULIMIT, or @code{MAXUMEM}.
-
-@item
-Current GCC versions probably do not work on version 2 of the NeXT
-operating system.
-
-@item
-On NeXTStep 3.0, the Objective C compiler does not work, due,
-apparently, to a kernel bug that it happens to trigger.  This problem
-does not happen on 3.1.
-
-@item
-On the Tower models 4@var{n}0 and 6@var{n}0, by default a process is not
-allowed to have more than one megabyte of memory.  GCC cannot compile
-itself (or many other programs) with @samp{-O} in that much memory.
-
-To solve this problem, reconfigure the kernel adding the following line
-to the configuration file:
-
-@smallexample
-MAXUMEM = 4096
-@end smallexample
-
-@item
-On HP 9000 series 300 or 400 running HP-UX release 8.0, there is a bug
-in the assembler that must be fixed before GCC can be built.  This
-bug manifests itself during the first stage of compilation, while
-building @file{libgcc2.a}:
-
-@smallexample
-_floatdisf
-cc1: warning: `-g' option not supported on this version of GCC
-cc1: warning: `-g1' option not supported on this version of GCC
-./xgcc: Internal compiler error: program as got fatal signal 11
-@end smallexample
-
-A patched version of the assembler is available as the file
-@uref{ftp://altdorf.ai.mit.edu/archive/cph/hpux-8.0-assembler}.  If you
-have HP software support, the patch can also be obtained directly from
-HP, as described in the following note:
-
-@quotation
-This is the patched assembler, to patch SR#1653-010439, where the
-assembler aborts on floating point constants.
-
-The bug is not really in the assembler, but in the shared library
-version of the function ``cvtnum(3c)''.  The bug on ``cvtnum(3c)'' is
-SR#4701-078451.  Anyway, the attached assembler uses the archive
-library version of ``cvtnum(3c)'' and thus does not exhibit the bug.
-@end quotation
-
-This patch is also known as PHCO_4484.
-
-@item
-On HP-UX version 8.05, but not on 8.07 or more recent versions,
-the @code{fixproto} shell script triggers a bug in the system shell.
-If you encounter this problem, upgrade your operating system or
-use BASH (the GNU shell) to run @code{fixproto}.
-
-@item
-There may be similar problems on System V Release 3.1 on 386 systems.
-
-@item
-On the Intel Paragon (an i860 machine), if you are using operating
-system version 1.0, you will get warnings or errors about redefinition
-of @code{va_arg} when you build GCC.
-
-If this happens, then you need to link most programs with the library
-@file{iclib.a}.  You must also modify @file{stdio.h} as follows: before
-the lines
-
-@example
-#if     defined(__i860__) && !defined(_VA_LIST)
-#include <va_list.h>
-@end example
-
-@noindent
-insert the line
-
-@example
-#if __PGC__
-@end example
-
-@noindent
-and after the lines
-
-@example
-extern int  vprintf(const char *, va_list );
-extern int  vsprintf(char *, const char *, va_list );
-#endif
-@end example
-
-@noindent
-insert the line
-
-@example
-#endif /* __PGC__ */
-@end example
-
-These problems don't exist in operating system version 1.1.
-
-@item
-On the Altos 3068, programs compiled with GCC won't work unless you
-fix a kernel bug.  This happens using system versions V.2.2 1.0gT1 and
-V.2.2 1.0e and perhaps later versions as well.  See the file
-@file{README.ALTOS}.
-
-@item
-You will get several sorts of compilation and linking errors on the
-we32k if you don't follow the special instructions.  @xref{Configurations}.
-
-@item
-A bug in the HP-UX 8.05 (and earlier) shell will cause the fixproto
-program to report an error of the form:
-
-@example
-./fixproto: sh internal 1K buffer overflow
-@end example
-
-To fix this, change the first line of the fixproto script to look like:
-
-@example
-#!/bin/ksh
-@end example
-@end itemize
-
 @node Cross-Compiler Problems
 @section Cross-Compiler Problems
 
diff --git a/gcc/doc/install-old.texi b/gcc/doc/install-old.texi
index c0aa729..96e10c8 100644
--- a/gcc/doc/install-old.texi
+++ b/gcc/doc/install-old.texi
@@ -664,705 +664,8 @@ Here is a list of configurations that have special treatment or special
 things you must know:
 
 @table @samp
-@item 1750a-*-*
-MIL-STD-1750A processors.
-
-The MIL-STD-1750A cross configuration produces output for
-@code{as1750}, an assembler/linker available under the GNU Public
-License for the 1750A. @code{as1750} can be obtained at
-@uref{ftp://ftp.fta-berlin.de/pub/crossgcc/1750gals/}.
-A similarly licensed simulator for
-the 1750A is available from same address.
-
-You should ignore a fatal error during the building of libgcc (libgcc is
-not yet implemented for the 1750A.)
-
-The @code{as1750} assembler requires the file @file{ms1750.inc}, which is
-found in the directory @file{config/1750a}.
-
-GNU CC produced the same sections as the Fairchild F9450 C Compiler,
-namely:
-
-@table @code
-@item Normal
-The program code section.
-
-@item Static
-The read/write (RAM) data section.
-
-@item Konst
-The read-only (ROM) constants section.
-
-@item Init
-Initialization section (code to copy KREL to SREL).
-@end table
-
-The smallest addressable unit is 16 bits (BITS_PER_UNIT is 16).  This
-means that type `char' is represented with a 16-bit word per character.
-The 1750A's "Load/Store Upper/Lower Byte" instructions are not used by
-GNU CC.
-
-@item alpha-*-osf1
-Systems using processors that implement the DEC Alpha architecture and
-are running the DEC Unix (OSF/1) operating system, for example the DEC
-Alpha AXP systems.CC.)
-
-GNU CC writes a @samp{.verstamp} directive to the assembler output file
-unless it is built as a cross-compiler.  It gets the version to use from
-the system header file @file{/usr/include/stamp.h}.  If you install a
-new version of DEC Unix, you should rebuild GCC to pick up the new version
-stamp.
-
-Note that since the Alpha is a 64-bit architecture, cross-compilers from
-32-bit machines will not generate code as efficient as that generated
-when the compiler is running on a 64-bit machine because many
-optimizations that depend on being able to represent a word on the
-target in an integral value on the host cannot be performed.  Building
-cross-compilers on the Alpha for 32-bit machines has only been tested in
-a few cases and may not work properly.
-
-@code{make compare} may fail on old versions of DEC Unix unless you add
-@samp{-save-temps} to @code{CFLAGS}.  On these systems, the name of the
-assembler input file is stored in the object file, and that makes
-comparison fail if it differs between the @code{stage1} and
-@code{stage2} compilations.  The option @samp{-save-temps} forces a
-fixed name to be used for the assembler input file, instead of a
-randomly chosen name in @file{/tmp}.  Do not add @samp{-save-temps}
-unless the comparisons fail without that option.  If you add
-@samp{-save-temps}, you will have to manually delete the @samp{.i} and
-@samp{.s} files after each series of compilations.
-
-GNU CC now supports both the native (ECOFF) debugging format used by DBX
-and GDB and an encapsulated STABS format for use only with GDB.  See the
-discussion of the @samp{--with-stabs} option of @file{configure} above
-for more information on these formats and how to select them.
-
-There is a bug in DEC's assembler that produces incorrect line numbers
-for ECOFF format when the @samp{.align} directive is used.  To work
-around this problem, GNU CC will not emit such alignment directives
-while writing ECOFF format debugging information even if optimization is
-being performed.  Unfortunately, this has the very undesirable
-side-effect that code addresses when @samp{-O} is specified are
-different depending on whether or not @samp{-g} is also specified.
-
-To avoid this behavior, specify @samp{-gstabs+} and use GDB instead of
-DBX.  DEC is now aware of this problem with the assembler and hopes to
-provide a fix shortly.
-
-@item arc-*-elf
-Argonaut ARC processor.
-This configuration is intended for embedded systems.
-
-@item arm-*-aout
-Advanced RISC Machines ARM-family processors.  These are often used in
-embedded applications.  There are no standard Unix configurations.
-This configuration corresponds to the basic instruction sequences and will
-produce @file{a.out} format object modules.
-
-You may need to make a variant of the file @file{arm.h} for your particular
-configuration.
-
-@item arm-*-elf
-This configuration is intended for embedded systems.
-
-@item arm-*-linux*aout
-Any of the ARM-family processors running the Linux-based GNU system with
-the @file{a.out} binary format.  This is an obsolete configuration.
-
-@item arm-*-linux
-@itemx arm-*-linux-gnu
-@itemx arm-*-linux*oldld
-Any of the ARM-family processors running the Linux-based GNU system with
-the @file{ELF} binary format.  You must use version 2.9.1.0.22 or later
-of the GNU/Linux binutils, which you can download from
-@uref{ftp://ftp.varesearch.com/pub/support/hjl/binutils/}.
-
-These two configurations differ only in the required version of GNU
-binutils.  For binutils 2.9.1.0.x, use @samp{arm-*-linux-gnuoldld}.  For
-newer versions of binutils, use @samp{arm-*-linux-gnu}.
-
-@item arm-*-riscix
-The ARM2 or ARM3 processor running RISC iX, Acorn's port of BSD Unix.
-If you are running a version of RISC iX prior to 1.2 then you must
-specify the version number during configuration.  Note that the
-assembler shipped with RISC iX does not support stabs debugging
-information; a new version of the assembler, with stabs support
-included, is now available from Acorn and via ftp
-@uref{ftp://ftp.acorn.com/pub/riscix/as+xterm.tar.Z}.  To enable stabs
-debugging, pass @samp{--with-gnu-as} to configure.
-
-You will need to install GNU @file{sed} before you can run configure.
-
-@item a29k
-AMD Am29k-family processors.  These are normally used in embedded
-applications.  There are no standard Unix configurations.
-This configuration
-corresponds to AMD's standard calling sequence and binary interface
-and is compatible with other 29k tools.
-
-You may need to make a variant of the file @file{a29k.h} for your
-particular configuration.
-
-@item a29k-*-bsd
-AMD Am29050 used in a system running a variant of BSD Unix.
-
-@item avr
-ATMEL AVR-family micro controllers.  These are used in embedded
-applications.  There are no standard Unix configurations.
-@xref{AVR Options}, for the list of supported MCU types.
-
-@item decstation-*
-MIPS-based DECstations can support three different personalities:
-Ultrix, DEC OSF/1, and OSF/rose.  (Alpha-based DECstation products have
-a configuration name beginning with @samp{alpha-dec}.)  To configure GCC
-for these platforms use the following configurations:
-
-@table @samp
-@item decstation-ultrix
-Ultrix configuration.
-
-@item decstation-osf1
-Dec's version of OSF/1.
-
-@item decstation-osfrose
-Open Software Foundation reference port of OSF/1 which uses the
-OSF/rose object file format instead of ECOFF.  Normally, you
-would not select this configuration.
-@end table
-
-The MIPS C compiler needs to be told to increase its table size
-for switch statements with the @samp{-Wf,-XNg1500} option in
-order to compile @file{cp/parse.c}.  If you use the @samp{-O2}
-optimization option, you also need to use @samp{-Olimit 3000}.
-Both of these options are automatically generated in the
-@file{Makefile} that the shell script @file{configure} builds.
-If you override the @code{CC} make variable and use the MIPS
-compilers, you may need to add @samp{-Wf,-XNg1500 -Olimit 3000}.
-
-@item elxsi-elxsi-bsd
-The Elxsi's C compiler has known limitations that prevent it from
-compiling GNU C.  Please contact @email{mrs@@cygnus.com} for more details.
-
-@item dsp16xx
-A port to the AT&T DSP1610 family of processors.
-
-@ignore
-@item fx80
-Alliant FX/8 computer.  Note that the standard installed C compiler in
-Concentrix 5.0 has a bug which prevent it from compiling GNU CC
-correctly.  You can patch the compiler bug as follows:
-
-@smallexample
-cp /bin/pcc ./pcc
-adb -w ./pcc - << EOF
-15f6?w 6610
-EOF
-@end smallexample
-
-Then you must use the @samp{-ip12} option when compiling GNU CC
-with the patched compiler, as shown here:
-
-@smallexample
-make CC="./pcc -ip12" CFLAGS=-w
-@end smallexample
-
-Note also that Alliant's version of DBX does not manage to work with the
-output from GNU CC.
-@end ignore
-
-@item h8300-*-*
-Hitachi H8/300 series of processors.
-
-The calling convention and structure layout has changed in release 2.6.
-All code must be recompiled.  The calling convention now passes the
-first three arguments in function calls in registers.  Structures are no
-longer a multiple of 2 bytes.
-
-@item i370-*-*
-This port is very preliminary and has many known bugs.  We hope to
-have a higher-quality port for this machine soon.
-
-@item i386-*-linux*oldld
-Use this configuration to generate @file{a.out} binaries on Linux-based
-GNU systems if you do not have gas/binutils version 2.5.2 or later
-installed. This is an obsolete configuration.
-
-@item i386-*-linux*aout
-Use this configuration to generate @file{a.out} binaries on Linux-based
-GNU systems. This configuration is being superseded. You must use
-gas/binutils version 2.5.2 or later.
-
-@item i386-*-linux
-@itemx i386-*-linux-gnu
-Use this configuration to generate ELF binaries on Linux-based GNU
-systems.  You must use gas/binutils version 2.5.2 or later.
-
-@item i386-*-sco
-Compilation with RCC is recommended.  Also, it may be a good idea to
-link with GNU malloc instead of the malloc that comes with the system.
-
-@item i386-*-sco3.2v4
-Use this configuration for SCO release 3.2 version 4.
-
-@item i386-*-sco3.2v5*
-Use this for the SCO OpenServer Release 5 family of operating systems.
-
-@item i386-*-isc
-It may be a good idea to link with GNU malloc instead of the malloc that
-comes with the system.
-
-In ISC version 4.1, @file{sed} core dumps when building
-@file{deduced.h}.  Use the version of @file{sed} from version 4.0.
-
-@item i386-*-esix
-It may be good idea to link with GNU malloc instead of the malloc that
-comes with the system.
-
-@item i386-ibm-aix
-You need to use GAS version 2.1 or later, and LD from
-GNU binutils version 2.2 or later.
-
-@item i386-sequent-bsd
-Go to the Berkeley universe before compiling.
-
-@item i386-sequent-ptx1*
-@itemx i386-sequent-ptx2*
-You must install GNU @file{sed} before running @file{configure}.
-
-@item *-lynx-lynxos
-LynxOS 2.2 and earlier comes with GNU CC 1.x already installed as
-@file{/bin/gcc}.  You should compile with this instead of @file{/bin/cc}.
-You can tell GNU CC to use the GNU assembler and linker, by specifying
-@samp{--with-gnu-as --with-gnu-ld} when configuring.  These will produce
-COFF format object files and executables;  otherwise GNU CC will use the
-installed tools, which produce @file{a.out} format executables.
-
-@item m32r-*-elf
-Mitsubishi M32R processor.
-This configuration is intended for embedded systems.
-
-@item m68000-hp-bsd
-HP 9000 series 200 running BSD.  Note that the C compiler that comes
-with this system cannot compile GNU CC; contact @email{law@@cygnus.com}
-to get binaries of GNU CC for bootstrapping.
-
-@item m68k-altos
-Altos 3068.  You must use the GNU assembler, linker and debugger.
-Also, you must fix a kernel bug.  Details in the file @file{README.ALTOS}.
-
-@item m68k-apple-aux
-Apple Macintosh running A/UX.
-You may configure GCC  to use either the system assembler and
-linker or the GNU assembler and linker.  You should use the GNU configuration
-if you can, especially if you also want to use GNU C++.  You enabled
-that configuration with + the @samp{--with-gnu-as} and @samp{--with-gnu-ld}
-options to @code{configure}.
-
-Note the C compiler that comes
-with this system cannot compile GNU CC.  You can find binaries of GNU CC
-for bootstrapping on @code{jagubox.gsfc.nasa.gov}.
-You will also a patched version of @file{/bin/ld} there that
-raises some of the arbitrary limits found in the original.
-
-@item m68k-att-sysv
-AT&T 3b1, a.k.a. 7300 PC.  This version of GNU CC cannot
-be compiled with the system C compiler, which is too buggy.
-You will need to get a previous version of GCC and use it to
-bootstrap.  Binaries are available from the OSU-CIS archive, at
-@uref{ftp://archive.cis.ohio-state.edu/pub/att7300/}.
-
-@item m68k-bull-sysv
-Bull DPX/2 series 200 and 300 with BOS-2.00.45 up to BOS-2.01. GNU CC works
-either with native assembler or GNU assembler. You can use
-GNU assembler with native coff generation by providing @samp{--with-gnu-as} to
-the configure script or use GNU assembler with dbx-in-coff encapsulation
-by providing @samp{--with-gnu-as --stabs}. For any problem with native
-assembler or for availability of the DPX/2 port of GAS, contact
-@email{F.Pierresteguy@@frcl.bull.fr}.
-
-@item m68k-crds-unox
-Use @samp{configure unos} for building on Unos.
-
-The Unos assembler is named @code{casm} instead of @code{as}.  For some
-strange reason linking @file{/bin/as} to @file{/bin/casm} changes the
-behavior, and does not work.  So, when installing GNU CC, you should
-install the following script as @file{as} in the subdirectory where
-the passes of GCC are installed:
-
-@example
-#!/bin/sh
-casm $*
-@end example
-
-The default Unos library is named @file{libunos.a} instead of
-@file{libc.a}.  To allow GNU CC to function, either change all
-references to @samp{-lc} in @file{gcc.c} to @samp{-lunos} or link
-@file{/lib/libc.a} to @file{/lib/libunos.a}.
-
-@cindex @code{alloca}, for Unos
-When compiling GNU CC with the standard compiler, to overcome bugs in
-the support of @code{alloca}, do not use @samp{-O} when making stage 2.
-Then use the stage 2 compiler with @samp{-O} to make the stage 3
-compiler.  This compiler will have the same characteristics as the usual
-stage 2 compiler on other systems.  Use it to make a stage 4 compiler
-and compare that with stage 3 to verify proper compilation.
-
-(Perhaps simply defining @code{ALLOCA} in @file{x-crds} as described in
-the comments there will make the above paragraph superfluous.  Please
-inform us of whether this works.)
-
-Unos uses memory segmentation instead of demand paging, so you will need
-a lot of memory.  5 Mb is barely enough if no other tasks are running.
-If linking @file{cc1} fails, try putting the object files into a library
-and linking from that library.
-
-@item m68k-hp-hpux
-HP 9000 series 300 or 400 running HP-UX.  HP-UX version 8.0 has a bug in
-the assembler that prevents compilation of GNU CC.  To fix it, get patch
-PHCO_4484 from HP.
-
-In addition, if you wish to use gas @samp{--with-gnu-as} you must use
-gas version 2.1 or later, and you must use the GNU linker version 2.1 or
-later.  Earlier versions of gas relied upon a program which converted the
-gas output into the native HP-UX format, but that program has not been
-kept up to date.  gdb does not understand that native HP-UX format, so
-you must use gas if you wish to use gdb.
-
-@item m68k-sun
-Sun 3.  We do not provide a configuration file to use the Sun FPA by
-default, because programs that establish signal handlers for floating
-point traps inherently cannot work with the FPA.
-
-@item m6811-elf
-Motorola 68HC11 family micro controllers.  These are used in embedded
-applications.  There are no standard Unix configurations.
-
-@item m6812-elf
-Motorola 68HC12 family micro controllers.  These are used in embedded
-applications.  There are no standard Unix configurations.
-
-@item m88k-*-svr3
-Motorola m88k running the AT&T/Unisoft/Motorola V.3 reference port.
-These systems tend to use the Green Hills C, revision 1.8.5, as the
-standard C compiler.  There are apparently bugs in this compiler that
-result in object files differences between stage 2 and stage 3.  If this
-happens, make the stage 4 compiler and compare it to the stage 3
-compiler.  If the stage 3 and stage 4 object files are identical, this
-suggests you encountered a problem with the standard C compiler; the
-stage 3 and 4 compilers may be usable.
-
-It is best, however, to use an older version of GNU CC for bootstrapping
-if you have one.
-
-@item m88k-*-dgux
-Motorola m88k running DG/UX.  To build 88open BCS native or cross
-compilers on DG/UX, specify the configuration name as
-@samp{m88k-*-dguxbcs} and build in the 88open BCS software development
-environment.  To build ELF native or cross compilers on DG/UX, specify
-@samp{m88k-*-dgux} and build in the DG/UX ELF development environment.
-You set the software development environment by issuing
-@samp{sde-target} command and specifying either @samp{m88kbcs} or
-@samp{m88kdguxelf} as the operand.
-
-If you do not specify a configuration name, @file{configure} guesses the
-configuration based on the current software development environment.
-
-@item m88k-tektronix-sysv3
-Tektronix XD88 running UTekV 3.2e.  Do not turn on
-optimization while building stage1 if you bootstrap with
-the buggy Green Hills compiler.  Also, The bundled LAI
-System V NFS is buggy so if you build in an NFS mounted
-directory, start from a fresh reboot, or avoid NFS all together.
-Otherwise you may have trouble getting clean comparisons
-between stages.
-
-@item mips-mips-bsd
-MIPS machines running the MIPS operating system in BSD mode.  It's
-possible that some old versions of the system lack the functions
-@code{memcpy}, @code{memmove}, @code{memcmp}, and @code{memset}.  If your
-system lacks these, you must remove or undo the definition of
-@code{TARGET_MEM_FUNCTIONS} in @file{mips-bsd.h}.
-
-The MIPS C compiler needs to be told to increase its table size
-for switch statements with the @samp{-Wf,-XNg1500} option in
-order to compile @file{cp/parse.c}.  If you use the @samp{-O2}
-optimization option, you also need to use @samp{-Olimit 3000}.
-Both of these options are automatically generated in the
-@file{Makefile} that the shell script @file{configure} builds.
-If you override the @code{CC} make variable and use the MIPS
-compilers, you may need to add @samp{-Wf,-XNg1500 -Olimit 3000}.
-
-@item mips-mips-riscos*
-The MIPS C compiler needs to be told to increase its table size
-for switch statements with the @samp{-Wf,-XNg1500} option in
-order to compile @file{cp/parse.c}.  If you use the @samp{-O2}
-optimization option, you also need to use @samp{-Olimit 3000}.
-Both of these options are automatically generated in the
-@file{Makefile} that the shell script @file{configure} builds.
-If you override the @code{CC} make variable and use the MIPS
-compilers, you may need to add @samp{-Wf,-XNg1500 -Olimit 3000}.
-
-MIPS computers running RISC-OS can support four different
-personalities: default, BSD 4.3, System V.3, and System V.4
-(older versions of RISC-OS don't support V.4).  To configure GCC
-for these platforms use the following configurations:
-
-@table @samp
-@item mips-mips-riscos@code{rev}
-Default configuration for RISC-OS, revision @code{rev}.
-
-@item mips-mips-riscos@code{rev}bsd
-BSD 4.3 configuration for RISC-OS, revision @code{rev}.
-
-@item mips-mips-riscos@code{rev}sysv4
-System V.4 configuration for RISC-OS, revision @code{rev}.
-
-@item mips-mips-riscos@code{rev}sysv
-System V.3 configuration for RISC-OS, revision @code{rev}.
-@end table
-
-The revision @code{rev} mentioned above is the revision of
-RISC-OS to use.  You must reconfigure GCC when going from a
-RISC-OS revision 4 to RISC-OS revision 5.  This has the effect of
-avoiding a linker
-@ifclear INSTALLONLY
-bug (see @ref{Installation Problems}, for more details).
-@end ifclear
-@ifset INSTALLONLY
-bug.
-@end ifset
-
-@item mips-sgi-*
-In order to compile GCC on an SGI running IRIX 4, the "c.hdr.lib"
-option must be installed from the CD-ROM supplied from Silicon Graphics.
-This is found on the 2nd CD in release 4.0.1.
-
-In order to compile GCC on an SGI running IRIX 5, the "compiler_dev.hdr"
-subsystem must be installed from the IDO CD-ROM supplied by Silicon
-Graphics.
-
-@code{make compare} may fail on version 5 of IRIX unless you add
-@samp{-save-temps} to @code{CFLAGS}.  On these systems, the name of the
-assembler input file is stored in the object file, and that makes
-comparison fail if it differs between the @code{stage1} and
-@code{stage2} compilations.  The option @samp{-save-temps} forces a
-fixed name to be used for the assembler input file, instead of a
-randomly chosen name in @file{/tmp}.  Do not add @samp{-save-temps}
-unless the comparisons fail without that option.  If you do you
-@samp{-save-temps}, you will have to manually delete the @samp{.i} and
-@samp{.s} files after each series of compilations.
-
-The MIPS C compiler needs to be told to increase its table size
-for switch statements with the @samp{-Wf,-XNg1500} option in
-order to compile @file{cp/parse.c}.  If you use the @samp{-O2}
-optimization option, you also need to use @samp{-Olimit 3000}.
-Both of these options are automatically generated in the
-@file{Makefile} that the shell script @file{configure} builds.
-If you override the @code{CC} make variable and use the MIPS
-compilers, you may need to add @samp{-Wf,-XNg1500 -Olimit 3000}.
-
-On Irix version 4.0.5F, and perhaps on some other versions as well,
-there is an assembler bug that reorders instructions incorrectly.  To
-work around it, specify the target configuration
-@samp{mips-sgi-irix4loser}.  This configuration inhibits assembler
-optimization.
-
-In a compiler configured with target @samp{mips-sgi-irix4}, you can turn
-off assembler optimization by using the @samp{-noasmopt} option.  This
-compiler option passes the option @samp{-O0} to the assembler, to
-inhibit reordering.
-
-The @samp{-noasmopt} option can be useful for testing whether a problem
-is due to erroneous assembler reordering.  Even if a problem does not go
-away with @samp{-noasmopt}, it may still be due to assembler
-reordering---perhaps GNU CC itself was miscompiled as a result.
-
-To enable debugging under Irix 5, you must use GNU as 2.5 or later,
-and use the @samp{--with-gnu-as} configure option when configuring gcc.
-GNU as is distributed as part of the binutils package.
-
-@item mips-sony-sysv
-Sony MIPS NEWS.  This works in NEWSOS 5.0.1, but not in 5.0.2 (which
-uses ELF instead of COFF).  Support for 5.0.2 will probably be provided
-soon by volunteers.  In particular, the linker does not like the
-code generated by GCC when shared libraries are linked in.
-
-@item ns32k-encore
-Encore ns32000 system.  Encore systems are supported only under BSD.
-
-@item ns32k-*-genix
-National Semiconductor ns32000 system.  Genix has bugs in @code{alloca}
-and @code{malloc}; you must get the compiled versions of these from GNU
-Emacs.
-
-@item ns32k-sequent
-Go to the Berkeley universe before compiling.
-
-@item ns32k-utek
-UTEK ns32000 system (``merlin'').  The C compiler that comes with this
-system cannot compile GNU CC; contact @samp{tektronix!reed!mason} to get
-binaries of GNU CC for bootstrapping.
-
-@item romp-*-aos
-@itemx romp-*-mach
-The only operating systems supported for the IBM RT PC are AOS and
-MACH.  GNU CC does not support AIX running on the RT.  We recommend you
-compile GNU CC with an earlier version of itself; if you compile GNU CC
-with @code{hc}, the Metaware compiler, it will work, but you will get
-mismatches between the stage 2 and stage 3 compilers in various files.
-These errors are minor differences in some floating-point constants and
-can be safely ignored; the stage 3 compiler is correct.
-
-@item rs6000-*-aix
-@itemx powerpc-*-aix
-Various early versions of each release of the IBM XLC compiler will not
-bootstrap GNU CC.  Symptoms include differences between the stage2 and
-stage3 object files, and errors when compiling @file{libgcc.a} or
-@file{enquire}.  Known problematic releases include: xlc-1.2.1.8,
-xlc-1.3.0.0 (distributed with AIX 3.2.5), and xlc-1.3.0.19.  Both
-xlc-1.2.1.28 and xlc-1.3.0.24 (PTF 432238) are known to produce working
-versions of GNU CC, but most other recent releases correctly bootstrap
-GNU CC.
-
-Release 4.3.0 of AIX and ones prior to AIX 3.2.4 include a version of
-the IBM assembler which does not accept debugging directives: assembler
-updates are available as PTFs.  Also, if you are using AIX 3.2.5 or
-greater and the GNU assembler, you must have a version modified after
-October 16th, 1995 in order for the GNU C compiler to build.  See the
-file @file{README.RS6000} for more details on any of these problems.
-
-GNU CC does not yet support the 64-bit PowerPC instructions.
-
-Objective C does not work on this architecture because it makes assumptions
-that are incompatible with the calling conventions.
-
-AIX on the RS/6000 provides support (NLS) for environments outside of
-the United States.  Compilers and assemblers use NLS to support
-locale-specific representations of various objects including
-floating-point numbers ("." vs "," for separating decimal fractions).
-There have been problems reported where the library linked with GNU CC
-does not produce the same floating-point formats that the assembler
-accepts.  If you have this problem, set the LANG environment variable to
-"C" or "En_US".
-
-Due to changes in the way that GNU CC invokes the binder (linker) for AIX
-4.1, you may now receive warnings of duplicate symbols from the link step
-that were not reported before.  The assembly files generated by GNU CC for
-AIX have always included multiple symbol definitions for certain global
-variable and function declarations in the original program.  The warnings
-should not prevent the linker from producing a correct library or runnable
-executable.
-
-By default, AIX 4.1 produces code that can be used on either Power or
-PowerPC processors.
-
-You can specify a default version for the @samp{-mcpu=}@var{cpu_type}
-switch by using the configure option @samp{--with-cpu-}@var{cpu_type}.
-
-@item powerpc-*-elf
-@itemx powerpc-*-sysv4
-PowerPC system in big endian mode, running System V.4.
-
-You can specify a default version for the @samp{-mcpu=}@var{cpu_type}
-switch by using the configure option @samp{--with-cpu-}@var{cpu_type}.
-
-@item powerpc-*-linux
-@itemx powerpc-*-linux-gnu
-PowerPC system in big endian mode, running the Linux-based GNU system.
-
-You can specify a default version for the @samp{-mcpu=}@var{cpu_type}
-switch by using the configure option @samp{--with-cpu-}@var{cpu_type}.
-
-@item powerpc-*-eabiaix
-Embedded PowerPC system in big endian mode with -mcall-aix selected as
-the default.
-
-You can specify a default version for the @samp{-mcpu=}@var{cpu_type}
-switch by using the configure option @samp{--with-cpu-}@var{cpu_type}.
-
-@item powerpc-*-eabisim
-Embedded PowerPC system in big endian mode for use in running under the
-PSIM simulator.
-
-You can specify a default version for the @samp{-mcpu=}@var{cpu_type}
-switch by using the configure option @samp{--with-cpu-}@var{cpu_type}.
-
-@item powerpc-*-eabi
-Embedded PowerPC system in big endian mode.
-
-You can specify a default version for the @samp{-mcpu=}@var{cpu_type}
-switch by using the configure option @samp{--with-cpu-}@var{cpu_type}.
-
-@item powerpcle-*-elf
-@itemx powerpcle-*-sysv4
-PowerPC system in little endian mode, running System V.4.
-
-You can specify a default version for the @samp{-mcpu=}@var{cpu_type}
-switch by using the configure option @samp{--with-cpu-}@var{cpu_type}.
-
-@item powerpcle-*-eabisim
-Embedded PowerPC system in little endian mode for use in running under
-the PSIM simulator.
-
-@itemx powerpcle-*-eabi
-Embedded PowerPC system in little endian mode.
-
-You can specify a default version for the @samp{-mcpu=}@var{cpu_type}
-switch by using the configure option @samp{--with-cpu-}@var{cpu_type}.
-
-@item powerpcle-*-winnt
-@itemx powerpcle-*-pe
-PowerPC system in little endian mode running Windows NT.
-
-You can specify a default version for the @samp{-mcpu=}@var{cpu_type}
-switch by using the configure option @samp{--with-cpu-}@var{cpu_type}.
-
-@item vax-dec-ultrix
-Don't try compiling with Vax C (@code{vcc}).  It produces incorrect code
-in some cases (for example, when @code{alloca} is used).
-
-Meanwhile, compiling @file{cp/parse.c} with pcc does not work because of
-an internal table size limitation in that compiler.  To avoid this
-problem, compile just the GNU C compiler first, and use it to recompile
-building all the languages that you want to run.
-
 @item vax-dec-vms
 See @ref{VMS Install}, for details on how to install GNU CC on VMS.
-
-@item we32k-*-*
-These computers are also known as the 3b2, 3b5, 3b20 and other similar
-names.  (However, the 3b1 is actually a 68000; see
-@ref{Configurations}.)
-
-Don't use @samp{-g} when compiling with the system's compiler.  The
-system's linker seems to be unable to handle such a large program with
-debugging information.
-
-The system's compiler runs out of capacity when compiling @file{stmt.c}
-in GNU CC.  You can work around this by building @file{cpp} in GNU CC
-first, then use that instead of the system's preprocessor with the
-system's C compiler to compile @file{stmt.c}.  Here is how:
-
-@smallexample
-mv /lib/cpp /lib/cpp.att
-cp cpp /lib/cpp.gnu
-echo '/lib/cpp.gnu -traditional $@{1+"$@@"@}' > /lib/cpp
-chmod +x /lib/cpp
-@end smallexample
-
-The system's compiler produces bad code for some of the GNU CC
-optimization files.  So you must build the stage 2 compiler without
-optimization.  Then build a stage 3 compiler with optimization.
-That executable should work.  Here are the necessary commands:
-
-@smallexample
-make LANGUAGES=c CC=stage1/xgcc CFLAGS="-Bstage1/ -g"
-make stage2
-make CC=stage2/xgcc CFLAGS="-Bstage2/ -g -O"
-@end smallexample
-
-You may need to raise the ULIMIT setting to build a C++ compiler,
-as the file @file{cc1plus} is larger than one megabyte.
 @end table
 
 @node Other Dir
diff --git a/gcc/doc/install.texi b/gcc/doc/install.texi
index ae18df7..42b080a 100644
--- a/gcc/doc/install.texi
+++ b/gcc/doc/install.texi
@@ -33,7 +33,7 @@
 @settitle Installing GCC: Binaries
 @end ifset
 
-@comment $Id: install.texi,v 1.11 2001/06/02 13:59:52 jsm28 Exp $
+@comment $Id: install.texi,v 1.12 2001/06/02 18:21:37 jsm28 Exp $
 @c Copyright (C) 2001 Free Software Foundation, Inc.
 @c *** Converted to texinfo by Dean Wakerley, dean@wakerley.com
 
@@ -550,8 +550,35 @@ We @strong{highly} recommend that GCC be built using GNU make;
 other versions may work, then again they might not.
 
 (For example, many broken versions of make will fail if you use the
-recommended setup where @var{objdir} is different from @var{srcdir}.)
+recommended setup where @var{objdir} is different from @var{srcdir}.
+Other broken versions may recompile parts of the compiler when
+installing the compiler.)
 
+Some commands executed when making the compiler may fail (return a
+non-zero status) and be ignored by @code{make}.  These failures, which
+are often due to files that were not found, are expected, and can safely
+be ignored.
+
+It is normal to have compiler warnings when compiling certain files.
+Unless you are a GCC developer, you can generally ignore these warnings
+unless they cause compilation to fail.
+
+On certain old systems, defining certain environment variables such as
+@code{CC} can interfere with the functioning of @code{make}.
+
+If you encounter seemingly strange errors when trying to build the
+compiler in a directory other than the source directory, it could be
+because you have previously configured the compiler in the source
+directory.  Make sure you have done all the necessary preparations.
+
+If you build GCC on a BSD system using a directory stored in an old System
+V file system, problems may occur in running @code{fixincludes} if the
+System V file system doesn't support symbolic links.  These problems
+result in a failure to fix the declaration of @code{size_t} in
+@file{sys/types.h}.  If you find that @code{size_t} is a signed type and
+that type mismatches occur, this could be the cause.
+
+The solution is not to use such a directory for building GCC.
 
 @section Building a native compiler
 
@@ -963,16 +990,38 @@ GNU Compiler Collection on your machine.
 @ifhtml
 @itemize
 @item
+@uref{#1750a-*-*,,1750a-*-*}
+@item
+@uref{#a29k,,a29k}
+@item
+@uref{#a29k-*-bsd,,a29k-*-bsd}
+@item
 @uref{#alpha*-dec-linux*,,alpha*-dec-linux*}
 @item
+@uref{#alpha-*-osf1,,alpha-*-osf1}
+@item
 @uref{#alpha*-dec-osf*,,alpha*-dec-osf*}
 @item
+@uref{#arc-*-elf,,arc-*-elf}
+@item
+@uref{#arm-*-aout,,arm-*-aout}
+@item
+@uref{#arm-*-elf,,arm-*-elf}
+@item
 @uref{#arm*-*-linux-gnu,,arm*-*-linux-gnu}
 @item
+@uref{#arm-*-riscix,,arm-*-riscix}
+@item
 @uref{#avr,,avr}
 @item
+@uref{#decstation-*,,decstation-*}
+@item
 @uref{#dos,,DOS}
 @item
+@uref{#dsp16xx,,dsp16xx}
+@item
+@uref{#elxsi-elxsi-bsd,,elxsi-elxsi-bsd}
+@item
 @uref{#h8300-hms,,h8300-hms}
 @item
 @uref{#hppa*-hp-hpux*,,hppa*-hp-hpux*}
@@ -983,30 +1032,124 @@ GNU Compiler Collection on your machine.
 @item
 @uref{#hppa*-hp-hpux11,,hppa*-hp-hpux11}
 @item
+@uref{#i370-*-*,,i370-*-*}
+@item
 @uref{#*-*-linux-gnu,,*-*-linux-gnu}
 @item
+@uref{#ix86-*-linux*oldld,,i?86-*-linux*oldld}
+@item
+@uref{#ix86-*-linux*aout,,i?86-*-linux*aout}
+@item
 @uref{#ix86-*-linux*,,i?86-*-linux*}
 @item
+@uref{#ix86-*-sco,,i?86-*-sco}
+@item
+@uref{#ix86-*-sco3.2v4,,i?86-*-sco3.2v4}
+@item
 @uref{#ix86-*-sco3.2v5*,,i?86-*-sco3.2v5*}
 @item
 @uref{#ix86-*-solaris*,,i?86-*-solaris*}
 @item
 @uref{#ix86-*-udk,,i?86-*-udk}
 @item
+@uref{#ix86-*-isc,,i?86-*-isc}
+@item
+@uref{#ix86-*-esix,,i?86-*-esix}
+@item
+@uref{#ix86-ibm-aix,,i?86-ibm-aix}
+@item
+@uref{#ix86-sequent-bsd,,i?86-sequent-bsd}
+@item
+@uref{#ix86-sequent-ptx1*,,i?86-sequent-ptx1*, i?86-sequent-ptx2*}
+@item
+@uref{#ix86-*-sysv3*,,i?86-*-sysv3*}
+@item
+@uref{#i860-intel-osf*,,i860-intel-osf*}
+@item
+@uref{#*-lynx-lynxos,,*-lynx-lynxos}
+@item
 @uref{#*-ibm-aix*,,*-ibm-aix*}
 @item
+@uref{#m32r-*-elf,,m32r-*-elf}
+@item
+@uref{#m68000-hp-bsd,,m68000-hp-bsd}
+@item
+@uref{#m6811-elf,,m6811-elf}
+@item
+@uref{#m6812-elf,,m6812-elf}
+@item
+@uref{#m68k-altos,,m68k-altos}
+@item
+@uref{#m68k-apple-aux,,m68k-apple-aux}
+@item
+@uref{#m68k-att-sysv,,m68k-att-sysv}
+@item
+@uref{#m68k-bull-sysv,,m68k-bull-sysv}
+@item
+@uref{#m68k-crds-unox,,m68k-crds-unox}
+@item
+@uref{#m68k-hp-hpux,,m68k-hp-hpux}
+@item
 @uref{#m68k-*-nextstep*,,m68k-*-nextstep*}
 @item
+@uref{#m68k-ncr-*,,m68k-ncr-*}
+@item
+@uref{#m68k-sun,,m68k-sun}
+@item
 @uref{#m68k-sun-sunos4.1.1,,m68k-sun-sunos4.1.1}
 @item
+@uref{#m88k-*-svr3,,m88k-*-svr3}
+@item
+@uref{#m88k-*-dgux,,m88k-*-dgux}
+@item
+@uref{#m88k-tektronix-sysv3,,m88k-tektronix-sysv3}
+@item
+@uref{#mips-*-*,,mips-*-*}
+@item
+@uref{#mips-mips-bsd,,mips-mips-bsd}
+@item
+@uref{#mips-mips-riscos*,,mips-mips-riscos*}
+@item
 @uref{#mips*-sgi-irix[45],,mips*-sgi-irix[45]}
 @item
 @uref{#mips*-sgi-irix6,,mips*-sgi-irix6}
 @item
+@uref{#mips-sony-sysv,,mips-sony-sysv}
+@item
+@uref{#ns32k-encore,,ns32k-encore}
+@item
+@uref{#ns32k-*-genix,,ns32k-*-genix}
+@item
+@uref{#ns32k-sequent,,ns32k-sequent}
+@item
+@uref{#ns32k-utek,,ns32k-utek}
+@item
+@uref{#rs6000-*-aix,,rs6000-*-aix, powerpc-*-aix}
+@item
+@uref{#powerpc-*-elf,,powerpc-*-elf, powerpc-*-sysv4}
+@item
 @uref{#powerpc-*-linux-gnu*,,powerpc-*-linux-gnu*}
 @item
+@uref{#powerpc-*-eabiaix,,powerpc-*-eabiaix}
+@item
+@uref{#powerpc-*-eabisim,,powerpc-*-eabisim}
+@item
+@uref{#powerpc-*-eabi,,powerpc-*-eabi}
+@item
+@uref{#powerpcle-*-elf,,powerpcle-*-elf, powerpcle-*-sysv4}
+@item
+@uref{#powerpcle-*-eabisim,,powerpcle-*-eabisim}
+@item
+@uref{#powerpcle-*-eabi,,powerpcle-*-eabi}
+@item
+@uref{#powerpcle-*-winnt,,powerpcle-*-winnt, powerpcle-*-pe}
+@item
+@uref{#romp-*-aos,,romp-*-aos, romp-*-mach}
+@item
 @uref{#*-*-solaris*,,*-*-solaris*}
 @item
+@uref{#sparc-sun-*,,sparc-sun-*}
+@item
 @uref{#sparc-sun-solaris*,,sparc-sun-solaris*}
 @item
 @uref{#sparc-sun-solaris2.7,,sparc-sun-solaris2.7}
@@ -1021,6 +1164,12 @@ GNU Compiler Collection on your machine.
 @item
 @uref{#sparc64-*-*,,sparc64-*-*}
 @item
+@uref{#*-*-sysv*,,*-*-sysv*}
+@item
+@uref{#vax-dec-ultrix,,vax-dec-ultrix}
+@item
+@uref{#we32k-*-*,,we32k-*-*}
+@item
 @uref{#windows,,Microsoft Windows}
 @item
 @uref{#os2,,OS/2}
@@ -1039,6 +1188,69 @@ GNU Compiler Collection on your machine.
 <!-- -------- host/target specific issues start here ---------------- -->
 <hr>
 @end html
+@heading @anchor{1750a-*-*}1750a-*-*
+MIL-STD-1750A processors.
+
+The MIL-STD-1750A cross configuration produces output for
+@code{as1750}, an assembler/linker available under the GNU Public
+License for the 1750A. @code{as1750} can be obtained at
+@uref{ftp://ftp.fta-berlin.de/pub/crossgcc/1750gals/}.
+A similarly licensed simulator for
+the 1750A is available from same address.
+
+You should ignore a fatal error during the building of libgcc (libgcc is
+not yet implemented for the 1750A.)
+
+The @code{as1750} assembler requires the file @file{ms1750.inc}, which is
+found in the directory @file{config/1750a}.
+
+GNU CC produced the same sections as the Fairchild F9450 C Compiler,
+namely:
+
+@table @code
+@item Normal
+The program code section.
+
+@item Static
+The read/write (RAM) data section.
+
+@item Konst
+The read-only (ROM) constants section.
+
+@item Init
+Initialization section (code to copy KREL to SREL).
+@end table
+
+The smallest addressable unit is 16 bits (BITS_PER_UNIT is 16).  This
+means that type `char' is represented with a 16-bit word per character.
+The 1750A's "Load/Store Upper/Lower Byte" instructions are not used by
+GNU CC.
+
+@html
+</p>
+<hr>
+@end html
+@heading @anchor{a29k}a29k
+AMD Am29k-family processors.  These are normally used in embedded
+applications.  There are no standard Unix configurations.
+This configuration
+corresponds to AMD's standard calling sequence and binary interface
+and is compatible with other 29k tools.
+
+You may need to make a variant of the file @file{a29k.h} for your
+particular configuration.
+
+@html
+</p>
+<hr>
+@end html
+@heading @anchor{a29k-*-bsd}a29k-*-bsd
+AMD Am29050 used in a system running a variant of BSD Unix.
+
+@html
+</p>
+<hr>
+@end html
 @heading @anchor{alpha*-dec-linux*}alpha*-dec-linux*
 
 We require binutils 2.11 or newer.  Previous binutils releases
@@ -1049,6 +1261,57 @@ the least of which is incorrect linking of shared libraries.
 </p>
 <hr>
 @end html
+@heading @anchor{alpha-*-osf1}alpha-*-osf1
+Systems using processors that implement the DEC Alpha architecture and
+are running the DEC Unix (OSF/1) operating system, for example the DEC
+Alpha AXP systems.CC.)
+
+GNU CC writes a @samp{.verstamp} directive to the assembler output file
+unless it is built as a cross-compiler.  It gets the version to use from
+the system header file @file{/usr/include/stamp.h}.  If you install a
+new version of DEC Unix, you should rebuild GCC to pick up the new version
+stamp.
+
+Note that since the Alpha is a 64-bit architecture, cross-compilers from
+32-bit machines will not generate code as efficient as that generated
+when the compiler is running on a 64-bit machine because many
+optimizations that depend on being able to represent a word on the
+target in an integral value on the host cannot be performed.  Building
+cross-compilers on the Alpha for 32-bit machines has only been tested in
+a few cases and may not work properly.
+
+@code{make compare} may fail on old versions of DEC Unix unless you add
+@samp{-save-temps} to @code{CFLAGS}.  On these systems, the name of the
+assembler input file is stored in the object file, and that makes
+comparison fail if it differs between the @code{stage1} and
+@code{stage2} compilations.  The option @samp{-save-temps} forces a
+fixed name to be used for the assembler input file, instead of a
+randomly chosen name in @file{/tmp}.  Do not add @samp{-save-temps}
+unless the comparisons fail without that option.  If you add
+@samp{-save-temps}, you will have to manually delete the @samp{.i} and
+@samp{.s} files after each series of compilations.
+
+GNU CC now supports both the native (ECOFF) debugging format used by DBX
+and GDB and an encapsulated STABS format for use only with GDB.  See the
+discussion of the @samp{--with-stabs} option of @file{configure} above
+for more information on these formats and how to select them.
+
+There is a bug in DEC's assembler that produces incorrect line numbers
+for ECOFF format when the @samp{.align} directive is used.  To work
+around this problem, GNU CC will not emit such alignment directives
+while writing ECOFF format debugging information even if optimization is
+being performed.  Unfortunately, this has the very undesirable
+side-effect that code addresses when @samp{-O} is specified are
+different depending on whether or not @samp{-g} is also specified.
+
+To avoid this behavior, specify @samp{-gstabs+} and use GDB instead of
+DBX.  DEC is now aware of this problem with the assembler and hopes to
+provide a fix shortly.
+
+@html
+</p>
+<hr>
+@end html
 @heading @anchor{alpha*-dec-osf*}alpha*-dec-osf*
 
 If you install a shared libstdc++ and, when you link a non-trivial C++
@@ -1095,6 +1358,34 @@ flag @option{-mieee}.
 </p>
 <hr>
 @end html
+@heading @anchor{arc-*-elf}arc-*-elf
+Argonaut ARC processor.
+This configuration is intended for embedded systems.
+
+@html
+</p>
+<hr>
+@end html
+@heading @anchor{arm-*-aout}arm-*-aout
+Advanced RISC Machines ARM-family processors.  These are often used in
+embedded applications.  There are no standard Unix configurations.
+This configuration corresponds to the basic instruction sequences and will
+produce @file{a.out} format object modules.
+
+You may need to make a variant of the file @file{arm.h} for your particular
+configuration.
+
+@html
+</p>
+<hr>
+@end html
+@heading @anchor{arm-*-elf}arm-*-elf
+This configuration is intended for embedded systems.
+
+@html
+</p>
+<hr>
+@end html
 @heading @anchor{arm*-*-linux-gnu}arm*-*-linux-gnu
 
 We require GNU binutils 2.10 or newer.
@@ -1103,8 +1394,29 @@ We require GNU binutils 2.10 or newer.
 </p>
 <hr>
 @end html
+@heading @anchor{arm-*-riscix}arm-*-riscix
+The ARM2 or ARM3 processor running RISC iX, Acorn's port of BSD Unix.
+If you are running a version of RISC iX prior to 1.2 then you must
+specify the version number during configuration.  Note that the
+assembler shipped with RISC iX does not support stabs debugging
+information; a new version of the assembler, with stabs support
+included, is now available from Acorn and via ftp
+@uref{ftp://ftp.acorn.com/pub/riscix/as+xterm.tar.Z}.  To enable stabs
+debugging, pass @samp{--with-gnu-as} to configure.
+
+You will need to install GNU @file{sed} before you can run configure.
+
+@html
+</p>
+<hr>
+@end html
 @heading @anchor{avr}avr
 
+ATMEL AVR-family micro controllers.  These are used in embedded
+applications.  There are no standard Unix configurations.  @xref{AVR
+Options,, AVR Options, gcc, Using and Porting the GNU Compiler
+Collection (GCC)}, for the list of supported MCU types.
+
 Use @samp{configure --target=avr} 
 @option{--enable-languages="c"}' to configure GCC.
 
@@ -1131,6 +1443,38 @@ indicates that you should upgrade to a newer version of the binutils.
 </p>
 <hr>
 @end html
+@heading @anchor{decstation-*}decstation-*
+MIPS-based DECstations can support three different personalities:
+Ultrix, DEC OSF/1, and OSF/rose.  (Alpha-based DECstation products have
+a configuration name beginning with @samp{alpha-dec}.)  To configure GCC
+for these platforms use the following configurations:
+
+@table @samp
+@item decstation-ultrix
+Ultrix configuration.
+
+@item decstation-osf1
+Dec's version of OSF/1.
+
+@item decstation-osfrose
+Open Software Foundation reference port of OSF/1 which uses the
+OSF/rose object file format instead of ECOFF.  Normally, you
+would not select this configuration.
+@end table
+
+The MIPS C compiler needs to be told to increase its table size
+for switch statements with the @samp{-Wf,-XNg1500} option in
+order to compile @file{cp/parse.c}.  If you use the @samp{-O2}
+optimization option, you also need to use @samp{-Olimit 3000}.
+Both of these options are automatically generated in the
+@file{Makefile} that the shell script @file{configure} builds.
+If you override the @code{CC} make variable and use the MIPS
+compilers, you may need to add @samp{-Wf,-XNg1500 -Olimit 3000}.
+
+@html
+</p>
+<hr>
+@end html
 @heading @anchor{dos}DOS
 
 Please have a look at our @uref{binaries.html,,binaries page}.
@@ -1139,10 +1483,31 @@ Please have a look at our @uref{binaries.html,,binaries page}.
 </p>
 <hr>
 @end html
+@heading @anchor{dsp16xx}dsp16xx
+A port to the AT&T DSP1610 family of processors.
+
+@html
+</p>
+<hr>
+@end html
+@heading @anchor{elxsi-elxsi-bsd}elxsi-elxsi-bsd
+The Elxsi's C compiler has known limitations that prevent it from
+compiling GNU C.  Please contact @email{mrs@@cygnus.com} for more details.
+
+@html
+</p>
+<hr>
+@end html
 @heading @anchor{h8300-hms}h8300-hms
+Hitachi H8/300 series of processors.
 
 Please have a look at our @uref{binaries.html,,binaries page}.
 
+The calling convention and structure layout has changed in release 2.6.
+All code must be recompiled.  The calling convention now passes the
+first three arguments in function calls in registers.  Structures are no
+longer a multiple of 2 bytes.
+
 @html
 </p>
 <hr>
@@ -1229,6 +1594,14 @@ HP-UX 11.
 </p>
 <hr>
 @end html
+@heading @anchor{i370-*-*}i370-*-*
+This port is very preliminary and has many known bugs.  We hope to
+have a higher-quality port for this machine soon.
+
+@html
+</p>
+<hr>
+@end html
 @heading @anchor{*-*-linux-gnu}*-*-linux-gnu
 
 If you use glibc 2.2 (or 2.1.9x), GCC 2.95.2 won't install
@@ -1240,6 +1613,24 @@ applied in the GCC source tree, fixes the compatibility problems.
 </p>
 <hr>
 @end html
+@heading @anchor{ix86-*-linux*oldld}i?86-*-linux*oldld
+Use this configuration to generate @file{a.out} binaries on Linux-based
+GNU systems if you do not have gas/binutils version 2.5.2 or later
+installed. This is an obsolete configuration.
+
+@html
+</p>
+<hr>
+@end html
+@heading @anchor{ix86-*-linux*aout}i?86-*-linux*aout
+Use this configuration to generate @file{a.out} binaries on Linux-based
+GNU systems. This configuration is being superseded. You must use
+gas/binutils version 2.5.2 or later.
+
+@html
+</p>
+<hr>
+@end html
 @heading @anchor{ix86-*-linux*}i?86-*-linux*
 
 You will need binutils-2.9.1.0.15 or newer for exception handling to work.
@@ -1252,7 +1643,23 @@ found on @uref{http://www.bitwizard.nl/sig11/,,www.bitwizard.nl}.
 </p>
 <hr>
 @end html
+@heading @anchor{ix86-*-sco}i?86-*-sco
+Compilation with RCC is recommended.  Also, it may be a good idea to
+link with GNU malloc instead of the malloc that comes with the system.
+
+@html
+</p>
+<hr>
+@end html
+@heading @anchor{ix86-*-sco3.2v4}i?86-*-sco3.2v4
+Use this configuration for SCO release 3.2 version 4.
+
+@html
+</p>
+<hr>
+@end html
 @heading @anchor{ix86-*-sco3.2v5*}i?86-*-sco3.2v5*
+Use this for the SCO OpenServer Release 5 family of operating systems.
 
 Unlike earlier versions of GCC, the ability to generate COFF with this
 target is no longer provided.
@@ -1384,6 +1791,112 @@ have installed.
 @html
 </p>
 <hr>
+@end html
+@heading @anchor{ix86-*-isc}i?86-*-isc
+It may be a good idea to link with GNU malloc instead of the malloc that
+comes with the system.
+
+In ISC version 4.1, @file{sed} core dumps when building
+@file{deduced.h}.  Use the version of @file{sed} from version 4.0.
+
+@html
+</p>
+<hr>
+@end html
+@heading @anchor{ix86-*-esix}i?86-*-esix
+It may be good idea to link with GNU malloc instead of the malloc that
+comes with the system.
+
+@html
+</p>
+<hr>
+@end html
+@heading @anchor{ix86-ibm-aix}i?86-ibm-aix
+You need to use GAS version 2.1 or later, and LD from
+GNU binutils version 2.2 or later.
+
+@html
+</p>
+<hr>
+@end html
+@heading @anchor{ix86-sequent-bsd}i?86-sequent-bsd
+Go to the Berkeley universe before compiling.
+
+@html
+</p>
+<hr>
+@end html
+@heading @anchor{ix86-sequent-ptx1*}i?86-sequent-ptx1*, i?86-sequent-ptx2*
+You must install GNU @file{sed} before running @file{configure}.
+
+@html
+</p>
+<hr>
+@end html
+@heading @anchor{#ix86-*-sysv3*}i?86-*-sysv3*
+The @code{fixproto} shell script may trigger a bug in the system shell.
+If you encounter this problem, upgrade your operating system or
+use BASH (the GNU shell) to run @code{fixproto}.
+
+
+@html
+</p>
+<hr>
+@end html
+@heading @anchor{i860-intel-osf*}i860-intel-osf*
+On the Intel Paragon (an i860 machine), if you are using operating
+system version 1.0, you will get warnings or errors about redefinition
+of @code{va_arg} when you build GCC.
+
+If this happens, then you need to link most programs with the library
+@file{iclib.a}.  You must also modify @file{stdio.h} as follows: before
+the lines
+
+@example
+#if     defined(__i860__) && !defined(_VA_LIST)
+#include <va_list.h>
+@end example
+
+@noindent
+insert the line
+
+@example
+#if __PGC__
+@end example
+
+@noindent
+and after the lines
+
+@example
+extern int  vprintf(const char *, va_list );
+extern int  vsprintf(char *, const char *, va_list );
+#endif
+@end example
+
+@noindent
+insert the line
+
+@example
+#endif /* __PGC__ */
+@end example
+
+These problems don't exist in operating system version 1.1.
+
+@html
+</p>
+<hr>
+@end html
+@heading @anchor{*-lynx-lynxos}*-lynx-lynxos
+LynxOS 2.2 and earlier comes with GNU CC 1.x already installed as
+@file{/bin/gcc}.  You should compile with this instead of @file{/bin/cc}.
+You can tell GNU CC to use the GNU assembler and linker, by specifying
+@samp{--with-gnu-as --with-gnu-ld} when configuring.  These will produce
+COFF format object files and executables;  otherwise GNU CC will use the
+installed tools, which produce @file{a.out} format executables.
+
+@html
+</p>
+<hr>
 <!-- rs6000-ibm-aix*, powerpc-ibm-aix* -->
 @end html
 @heading @anchor{*-ibm-aix*}*-ibm-aix*
@@ -1460,8 +1973,197 @@ environment variable to "C" or "En_US".
 </p>
 <hr>
 @end html
+@heading @anchor{m32r-*-elf}m32r-*-elf
+Mitsubishi M32R processor.
+This configuration is intended for embedded systems.
+
+@html
+</p>
+<hr>
+@end html
+@heading @anchor{m68000-hp-bsd}m68000-hp-bsd
+HP 9000 series 200 running BSD.  Note that the C compiler that comes
+with this system cannot compile GNU CC; contact @email{law@@cygnus.com}
+to get binaries of GNU CC for bootstrapping.
+
+@html
+</p>
+<hr>
+@end html
+@heading @anchor{m6811-elf}m6811-elf
+Motorola 68HC11 family micro controllers.  These are used in embedded
+applications.  There are no standard Unix configurations.
+
+@html
+</p>
+<hr>
+@end html
+@heading @anchor{m6812-elf}m6812-elf
+Motorola 68HC12 family micro controllers.  These are used in embedded
+applications.  There are no standard Unix configurations.
+
+@html
+</p>
+<hr>
+@end html
+@heading @anchor{m68k-altos}m68k-altos
+Altos 3068.  You must use the GNU assembler, linker and debugger.
+Also, you must fix a kernel bug.  Details in the file @file{README.ALTOS}.
+
+@html
+</p>
+<hr>
+@end html
+@heading @anchor{m68k-apple-aux}m68k-apple-aux
+Apple Macintosh running A/UX.
+You may configure GCC  to use either the system assembler and
+linker or the GNU assembler and linker.  You should use the GNU configuration
+if you can, especially if you also want to use GNU C++.  You enabled
+that configuration with + the @samp{--with-gnu-as} and @samp{--with-gnu-ld}
+options to @code{configure}.
+
+Note the C compiler that comes
+with this system cannot compile GNU CC.  You can find binaries of GNU CC
+for bootstrapping on @code{jagubox.gsfc.nasa.gov}.
+You will also a patched version of @file{/bin/ld} there that
+raises some of the arbitrary limits found in the original.
+
+@html
+</p>
+<hr>
+@end html
+@heading @anchor{m68k-att-sysv}m68k-att-sysv
+AT&T 3b1, a.k.a. 7300 PC.  This version of GNU CC cannot
+be compiled with the system C compiler, which is too buggy.
+You will need to get a previous version of GCC and use it to
+bootstrap.  Binaries are available from the OSU-CIS archive, at
+@uref{ftp://archive.cis.ohio-state.edu/pub/att7300/}.
+
+@html
+</p>
+<hr>
+@end html
+@heading @anchor{m68k-bull-sysv}m68k-bull-sysv
+Bull DPX/2 series 200 and 300 with BOS-2.00.45 up to BOS-2.01. GNU CC works
+either with native assembler or GNU assembler. You can use
+GNU assembler with native coff generation by providing @samp{--with-gnu-as} to
+the configure script or use GNU assembler with dbx-in-coff encapsulation
+by providing @samp{--with-gnu-as --stabs}. For any problem with native
+assembler or for availability of the DPX/2 port of GAS, contact
+@email{F.Pierresteguy@@frcl.bull.fr}.
+
+@html
+</p>
+<hr>
+@end html
+@heading @anchor{m68k-crds-unox}m68k-crds-unox
+Use @samp{configure unos} for building on Unos.
+
+The Unos assembler is named @code{casm} instead of @code{as}.  For some
+strange reason linking @file{/bin/as} to @file{/bin/casm} changes the
+behavior, and does not work.  So, when installing GNU CC, you should
+install the following script as @file{as} in the subdirectory where
+the passes of GCC are installed:
+
+@example
+#!/bin/sh
+casm $*
+@end example
+
+The default Unos library is named @file{libunos.a} instead of
+@file{libc.a}.  To allow GNU CC to function, either change all
+references to @samp{-lc} in @file{gcc.c} to @samp{-lunos} or link
+@file{/lib/libc.a} to @file{/lib/libunos.a}.
+
+@cindex @code{alloca}, for Unos
+When compiling GNU CC with the standard compiler, to overcome bugs in
+the support of @code{alloca}, do not use @samp{-O} when making stage 2.
+Then use the stage 2 compiler with @samp{-O} to make the stage 3
+compiler.  This compiler will have the same characteristics as the usual
+stage 2 compiler on other systems.  Use it to make a stage 4 compiler
+and compare that with stage 3 to verify proper compilation.
+
+(Perhaps simply defining @code{ALLOCA} in @file{x-crds} as described in
+the comments there will make the above paragraph superfluous.  Please
+inform us of whether this works.)
+
+Unos uses memory segmentation instead of demand paging, so you will need
+a lot of memory.  5 Mb is barely enough if no other tasks are running.
+If linking @file{cc1} fails, try putting the object files into a library
+and linking from that library.
+
+@html
+</p>
+<hr>
+@end html
+@heading @anchor{m68k-hp-hpux}m68k-hp-hpux
+HP 9000 series 300 or 400 running HP-UX.  HP-UX version 8.0 has a bug in
+the assembler that prevents compilation of GNU CC.  This
+bug manifests itself during the first stage of compilation, while
+building @file{libgcc2.a}:
+
+@smallexample
+_floatdisf
+cc1: warning: `-g' option not supported on this version of GCC
+cc1: warning: `-g1' option not supported on this version of GCC
+./xgcc: Internal compiler error: program as got fatal signal 11
+@end smallexample
+
+A patched version of the assembler is available as the file
+@uref{ftp://altdorf.ai.mit.edu/archive/cph/hpux-8.0-assembler}.  If you
+have HP software support, the patch can also be obtained directly from
+HP, as described in the following note:
+
+@quotation
+This is the patched assembler, to patch SR#1653-010439, where the
+assembler aborts on floating point constants.
+
+The bug is not really in the assembler, but in the shared library
+version of the function ``cvtnum(3c)''.  The bug on ``cvtnum(3c)'' is
+SR#4701-078451.  Anyway, the attached assembler uses the archive
+library version of ``cvtnum(3c)'' and thus does not exhibit the bug.
+@end quotation
+
+This patch is also known as PHCO_4484.
+
+In addition, if you wish to use gas @samp{--with-gnu-as} you must use
+gas version 2.1 or later, and you must use the GNU linker version 2.1 or
+later.  Earlier versions of gas relied upon a program which converted the
+gas output into the native HP-UX format, but that program has not been
+kept up to date.  gdb does not understand that native HP-UX format, so
+you must use gas if you wish to use gdb.
+
+On HP-UX version 8.05, but not on 8.07 or more recent versions, the
+@code{fixproto} shell script triggers a bug in the system shell.  If you
+encounter this problem, upgrade your operating system or use BASH (the
+GNU shell) to run @code{fixproto}.  This bug will cause the fixproto
+program to report an error of the form:
+
+@example
+./fixproto: sh internal 1K buffer overflow
+@end example
+
+To fix this, you can also change the first line of the fixproto script
+to look like:
+
+@example
+#!/bin/ksh
+@end example
+
+
+@html
+</p>
+<hr>
+@end html
 @heading @anchor{m68k-*-nextstep*}m68k-*-nextstep*
 
+Current GCC versions probably do not work on version 2 of the NeXT
+operating system.
+
+On NeXTStep 3.0, the Objective C compiler does not work, due,
+apparently, to a kernel bug that it happens to trigger.  This problem
+does not happen on 3.1.
+
 You absolutely @strong{must} use GNU sed and GNU make on this platform.
 
 
@@ -1499,6 +2201,31 @@ for this sequence to work.
   make bootstrap3
 @end example
 
+@html
+</p>
+<hr>
+@end html
+@heading @anchor{m68k-ncr-*}m68k-ncr-*
+On the Tower models 4@var{n}0 and 6@var{n}0, by default a process is not
+allowed to have more than one megabyte of memory.  GCC cannot compile
+itself (or many other programs) with @samp{-O} in that much memory.
+
+To solve this problem, reconfigure the kernel adding the following line
+to the configuration file:
+
+@smallexample
+MAXUMEM = 4096
+@end smallexample
+
+
+@html
+</p>
+<hr>
+@end html
+@heading @anchor{m68k-sun}m68k-sun
+Sun 3.  We do not provide a configuration file to use the Sun FPA by
+default, because programs that establish signal handlers for floating
+point traps inherently cannot work with the FPA.
 
 @html
 </p>
@@ -1513,8 +2240,197 @@ It is reported that you may need the GNU assembler on this platform.
 </p>
 <hr>
 @end html
+@heading @anchor{m88k-*-svr3}m88k-*-svr3
+Motorola m88k running the AT&T/Unisoft/Motorola V.3 reference port.
+These systems tend to use the Green Hills C, revision 1.8.5, as the
+standard C compiler.  There are apparently bugs in this compiler that
+result in object files differences between stage 2 and stage 3.  If this
+happens, make the stage 4 compiler and compare it to the stage 3
+compiler.  If the stage 3 and stage 4 object files are identical, this
+suggests you encountered a problem with the standard C compiler; the
+stage 3 and 4 compilers may be usable.
+
+It is best, however, to use an older version of GNU CC for bootstrapping
+if you have one.
+
+@html
+</p>
+<hr>
+@end html
+@heading @anchor{m88k-*-dgux}m88k-*-dgux
+Motorola m88k running DG/UX.  To build 88open BCS native or cross
+compilers on DG/UX, specify the configuration name as
+@samp{m88k-*-dguxbcs} and build in the 88open BCS software development
+environment.  To build ELF native or cross compilers on DG/UX, specify
+@samp{m88k-*-dgux} and build in the DG/UX ELF development environment.
+You set the software development environment by issuing
+@samp{sde-target} command and specifying either @samp{m88kbcs} or
+@samp{m88kdguxelf} as the operand.
+
+If you do not specify a configuration name, @file{configure} guesses the
+configuration based on the current software development environment.
+
+@html
+</p>
+<hr>
+@end html
+@heading @anchor{m88k-tektronix-sysv3}m88k-tektronix-sysv3
+Tektronix XD88 running UTekV 3.2e.  Do not turn on
+optimization while building stage1 if you bootstrap with
+the buggy Green Hills compiler.  Also, The bundled LAI
+System V NFS is buggy so if you build in an NFS mounted
+directory, start from a fresh reboot, or avoid NFS all together.
+Otherwise you may have trouble getting clean comparisons
+between stages.
+
+@html
+</p>
+<hr>
+@end html
+@heading @anchor{mips-*-*}mips-*-*
+If you use the 1.31 version of the MIPS assembler (such as was shipped
+with Ultrix 3.1), you will need to use the -fno-delayed-branch switch
+when optimizing floating point code.  Otherwise, the assembler will
+complain when the GCC compiler fills a branch delay slot with a
+floating point instruction, such as @code{add.d}.
+
+If on a MIPS system you get an error message saying ``does not have gp
+sections for all it's [sic] sectons [sic]'', don't worry about it.  This
+happens whenever you use GAS with the MIPS linker, but there is not
+really anything wrong, and it is okay to use the output file.  You can
+stop such warnings by installing the GNU linker.
+
+It would be nice to extend GAS to produce the gp tables, but they are
+optional, and there should not be a warning about their absence.
+
+Users have reported some problems with version 2.0 of the MIPS
+compiler tools that were shipped with Ultrix 4.1.  Version 2.10
+which came with Ultrix 4.2 seems to work fine.
+
+Users have also reported some problems with version 2.20 of the
+MIPS compiler tools that were shipped with RISC/os 4.x.  The earlier
+version 2.11 seems to work fine.
+
+Some versions of the MIPS linker will issue an assertion failure
+when linking code that uses @code{alloca} against shared
+libraries on RISC-OS 5.0, and DEC's OSF/1 systems.  This is a bug
+in the linker, that is supposed to be fixed in future revisions.
+To protect against this, GCC passes @samp{-non_shared} to the
+linker unless you pass an explicit @samp{-shared} or
+@samp{-call_shared} switch.
+
+@heading @anchor{mips-mips-bsd}mips-mips-bsd
+MIPS machines running the MIPS operating system in BSD mode.  It's
+possible that some old versions of the system lack the functions
+@code{memcpy}, @code{memmove}, @code{memcmp}, and @code{memset}.  If your
+system lacks these, you must remove or undo the definition of
+@code{TARGET_MEM_FUNCTIONS} in @file{mips-bsd.h}.
+
+The MIPS C compiler needs to be told to increase its table size
+for switch statements with the @samp{-Wf,-XNg1500} option in
+order to compile @file{cp/parse.c}.  If you use the @samp{-O2}
+optimization option, you also need to use @samp{-Olimit 3000}.
+Both of these options are automatically generated in the
+@file{Makefile} that the shell script @file{configure} builds.
+If you override the @code{CC} make variable and use the MIPS
+compilers, you may need to add @samp{-Wf,-XNg1500 -Olimit 3000}.
+
+@html
+</p>
+<hr>
+@end html
+@heading @anchor{mips-mips-riscos*}mips-mips-riscos*
+The MIPS C compiler needs to be told to increase its table size
+for switch statements with the @samp{-Wf,-XNg1500} option in
+order to compile @file{cp/parse.c}.  If you use the @samp{-O2}
+optimization option, you also need to use @samp{-Olimit 3000}.
+Both of these options are automatically generated in the
+@file{Makefile} that the shell script @file{configure} builds.
+If you override the @code{CC} make variable and use the MIPS
+compilers, you may need to add @samp{-Wf,-XNg1500 -Olimit 3000}.
+
+MIPS computers running RISC-OS can support four different
+personalities: default, BSD 4.3, System V.3, and System V.4
+(older versions of RISC-OS don't support V.4).  To configure GCC
+for these platforms use the following configurations:
+
+@table @samp
+@item mips-mips-riscos@code{rev}
+Default configuration for RISC-OS, revision @code{rev}.
+
+@item mips-mips-riscos@code{rev}bsd
+BSD 4.3 configuration for RISC-OS, revision @code{rev}.
+
+@item mips-mips-riscos@code{rev}sysv4
+System V.4 configuration for RISC-OS, revision @code{rev}.
+
+@html
+</p>
+<hr>
+@end html
+@item mips-mips-riscos@code{rev}sysv
+System V.3 configuration for RISC-OS, revision @code{rev}.
+@end table
+
+The revision @code{rev} mentioned above is the revision of
+RISC-OS to use.  You must reconfigure GCC when going from a
+RISC-OS revision 4 to RISC-OS revision 5.  This has the effect of
+avoiding a linker bug.
+
+@html
+</p>
+<hr>
+@end html
 @heading @anchor{mips*-sgi-irix[45]}mips*-sgi-irix[45]
 
+In order to compile GCC on an SGI running IRIX 4, the "c.hdr.lib"
+option must be installed from the CD-ROM supplied from Silicon Graphics.
+This is found on the 2nd CD in release 4.0.1.
+
+In order to compile GCC on an SGI running IRIX 5, the "compiler_dev.hdr"
+subsystem must be installed from the IDO CD-ROM supplied by Silicon
+Graphics.
+
+@code{make compare} may fail on version 5 of IRIX unless you add
+@samp{-save-temps} to @code{CFLAGS}.  On these systems, the name of the
+assembler input file is stored in the object file, and that makes
+comparison fail if it differs between the @code{stage1} and
+@code{stage2} compilations.  The option @samp{-save-temps} forces a
+fixed name to be used for the assembler input file, instead of a
+randomly chosen name in @file{/tmp}.  Do not add @samp{-save-temps}
+unless the comparisons fail without that option.  If you do you
+@samp{-save-temps}, you will have to manually delete the @samp{.i} and
+@samp{.s} files after each series of compilations.
+
+The MIPS C compiler needs to be told to increase its table size
+for switch statements with the @samp{-Wf,-XNg1500} option in
+order to compile @file{cp/parse.c}.  If you use the @samp{-O2}
+optimization option, you also need to use @samp{-Olimit 3000}.
+Both of these options are automatically generated in the
+@file{Makefile} that the shell script @file{configure} builds.
+If you override the @code{CC} make variable and use the MIPS
+compilers, you may need to add @samp{-Wf,-XNg1500 -Olimit 3000}.
+
+On Irix version 4.0.5F, and perhaps on some other versions as well,
+there is an assembler bug that reorders instructions incorrectly.  To
+work around it, specify the target configuration
+@samp{mips-sgi-irix4loser}.  This configuration inhibits assembler
+optimization.
+
+In a compiler configured with target @samp{mips-sgi-irix4}, you can turn
+off assembler optimization by using the @samp{-noasmopt} option.  This
+compiler option passes the option @samp{-O0} to the assembler, to
+inhibit reordering.
+
+The @samp{-noasmopt} option can be useful for testing whether a problem
+is due to erroneous assembler reordering.  Even if a problem does not go
+away with @samp{-noasmopt}, it may still be due to assembler
+reordering---perhaps GNU CC itself was miscompiled as a result.
+
+To enable debugging under Irix 5, you must use GNU as 2.5 or later,
+and use the @samp{--with-gnu-as} configure option when configuring gcc.
+GNU as is distributed as part of the binutils package.
+
 You must use GAS on these platforms, as the native assembler can not handle 
 the code for exception handling support. Either of these messages indicates 
 that you are using the MIPS assembler when instead you should be using GAS:
@@ -1608,6 +2524,109 @@ information about using GCC on IRIX platforms.
 </p>
 <hr>
 @end html
+@heading @anchor{mips-sony-sysv}mips-sony-sysv
+Sony MIPS NEWS.  This works in NEWSOS 5.0.1, but not in 5.0.2 (which
+uses ELF instead of COFF).  Support for 5.0.2 will probably be provided
+soon by volunteers.  In particular, the linker does not like the
+code generated by GCC when shared libraries are linked in.
+
+
+@html
+</p>
+<hr>
+@end html
+@heading @anchor{ns32k-encore}ns32k-encore
+Encore ns32000 system.  Encore systems are supported only under BSD.
+
+@html
+</p>
+<hr>
+@end html
+@heading @anchor{ns32k-*-genix}ns32k-*-genix
+National Semiconductor ns32000 system.  Genix has bugs in @code{alloca}
+and @code{malloc}; you must get the compiled versions of these from GNU
+Emacs.
+
+@html
+</p>
+<hr>
+@end html
+@heading @anchor{ns32k-sequent}ns32k-sequent
+Go to the Berkeley universe before compiling.
+
+@html
+</p>
+<hr>
+@end html
+@heading @anchor{ns32k-utek}ns32k-utek
+UTEK ns32000 system (``merlin'').  The C compiler that comes with this
+system cannot compile GNU CC; contact @samp{tektronix!reed!mason} to get
+binaries of GNU CC for bootstrapping.
+
+
+@html
+</p>
+<hr>
+@end html
+@heading @anchor{rs6000-*-aix}rs6000-*-aix, powerpc-*-aix
+Various early versions of each release of the IBM XLC compiler will not
+bootstrap GNU CC.  Symptoms include differences between the stage2 and
+stage3 object files, and errors when compiling @file{libgcc.a} or
+@file{enquire}.  Known problematic releases include: xlc-1.2.1.8,
+xlc-1.3.0.0 (distributed with AIX 3.2.5), and xlc-1.3.0.19.  Both
+xlc-1.2.1.28 and xlc-1.3.0.24 (PTF 432238) are known to produce working
+versions of GNU CC, but most other recent releases correctly bootstrap
+GNU CC.
+
+Release 4.3.0 of AIX and ones prior to AIX 3.2.4 include a version of
+the IBM assembler which does not accept debugging directives: assembler
+updates are available as PTFs.  Also, if you are using AIX 3.2.5 or
+greater and the GNU assembler, you must have a version modified after
+October 16th, 1995 in order for the GNU C compiler to build.  See the
+file @file{README.RS6000} for more details on any of these problems.
+
+GNU CC does not yet support the 64-bit PowerPC instructions.
+
+Objective C does not work on this architecture because it makes assumptions
+that are incompatible with the calling conventions.
+
+AIX on the RS/6000 provides support (NLS) for environments outside of
+the United States.  Compilers and assemblers use NLS to support
+locale-specific representations of various objects including
+floating-point numbers ("." vs "," for separating decimal fractions).
+There have been problems reported where the library linked with GNU CC
+does not produce the same floating-point formats that the assembler
+accepts.  If you have this problem, set the LANG environment variable to
+"C" or "En_US".
+
+Due to changes in the way that GNU CC invokes the binder (linker) for AIX
+4.1, you may now receive warnings of duplicate symbols from the link step
+that were not reported before.  The assembly files generated by GNU CC for
+AIX have always included multiple symbol definitions for certain global
+variable and function declarations in the original program.  The warnings
+should not prevent the linker from producing a correct library or runnable
+executable.
+
+By default, AIX 4.1 produces code that can be used on either Power or
+PowerPC processors.
+
+You can specify a default version for the @samp{-mcpu=}@var{cpu_type}
+switch by using the configure option @samp{--with-cpu-}@var{cpu_type}.
+
+@html
+</p>
+<hr>
+@end html
+@heading @anchor{powerpc-*-elf}powerpc-*-elf, powerpc-*-sysv4
+PowerPC system in big endian mode, running System V.4.
+
+You can specify a default version for the @samp{-mcpu=}@var{cpu_type}
+switch by using the configure option @samp{--with-cpu-}@var{cpu_type}.
+
+@html
+</p>
+<hr>
+@end html
 @heading @anchor{powerpc-*-linux-gnu*}powerpc-*-linux-gnu*
 
 You will need 
@@ -1615,6 +2634,91 @@ You will need
 or newer for a working GCC. It is strongly recommended to recompile binutils
 if you initially built it with gcc-2.7.2.x.
 
+You can specify a default version for the @samp{-mcpu=}@var{cpu_type}
+switch by using the configure option @samp{--with-cpu-}@var{cpu_type}.
+
+@html
+</p>
+<hr>
+@end html
+@heading @anchor{powerpc-*-eabiaix}powerpc-*-eabiaix
+Embedded PowerPC system in big endian mode with -mcall-aix selected as
+the default.
+
+You can specify a default version for the @samp{-mcpu=}@var{cpu_type}
+switch by using the configure option @samp{--with-cpu-}@var{cpu_type}.
+
+@html
+</p>
+<hr>
+@end html
+@heading @anchor{powerpc-*-eabisim}powerpc-*-eabisim
+Embedded PowerPC system in big endian mode for use in running under the
+PSIM simulator.
+
+You can specify a default version for the @samp{-mcpu=}@var{cpu_type}
+switch by using the configure option @samp{--with-cpu-}@var{cpu_type}.
+
+@html
+</p>
+<hr>
+@end html
+@heading @anchor{powerpc-*-eabi}powerpc-*-eabi
+Embedded PowerPC system in big endian mode.
+
+You can specify a default version for the @samp{-mcpu=}@var{cpu_type}
+switch by using the configure option @samp{--with-cpu-}@var{cpu_type}.
+
+@html
+</p>
+<hr>
+@end html
+@heading @anchor{powerpcle-*-elf}powerpcle-*-elf, powerpcle-*-sysv4
+PowerPC system in little endian mode, running System V.4.
+
+You can specify a default version for the @samp{-mcpu=}@var{cpu_type}
+switch by using the configure option @samp{--with-cpu-}@var{cpu_type}.
+
+@html
+</p>
+<hr>
+@end html
+@heading @anchor{powerpcle-*-eabisim}powerpcle-*-eabisim
+Embedded PowerPC system in little endian mode for use in running under
+the PSIM simulator.
+
+@html
+</p>
+<hr>
+@end html
+@heading @anchor{powerpcle-*-eabi}powerpcle-*-eabi
+Embedded PowerPC system in little endian mode.
+
+You can specify a default version for the @samp{-mcpu=}@var{cpu_type}
+switch by using the configure option @samp{--with-cpu-}@var{cpu_type}.
+
+@html
+</p>
+<hr>
+@end html
+@heading @anchor{powerpcle-*-winnt}powerpcle-*-winnt, powerpcle-*-pe
+PowerPC system in little endian mode running Windows NT.
+
+You can specify a default version for the @samp{-mcpu=}@var{cpu_type}
+switch by using the configure option @samp{--with-cpu-}@var{cpu_type}.
+
+@html
+</p>
+<hr>
+@end html
+@heading @anchor{romp-*-aos}romp-*-aos, romp-*-mach
+The only operating systems supported for the IBM RT PC are AOS and
+MACH.  GNU CC does not support AIX running on the RT.  We recommend you
+compile GNU CC with an earlier version of itself; if you compile GNU CC
+with @code{hc}, the Metaware compiler, it will work, but you will get
+mismatches between the stage 2 and stage 3 compilers in various files.
+These errors are minor differences in some floating-point constants and
+can be safely ignored; the stage 3 compiler is correct.
 
 @html
 </p>
@@ -1639,11 +2743,52 @@ error: can't compute value of an expression involving an external symbol.}
 
 This is Sun bug 4237974.  This is fixed with patch 108908-02 and has
 been fixed in later (5.x) versions of the assembler.
+
+@html
+<p>
+<hr>
+@end html
+@heading @anchor{sparc-sun-*}sparc-sun-*
+Sometimes on a Sun 4 you may observe a crash in the program
+@code{genflags} or @code{genoutput} while building GCC.  This is said to
+be due to a bug in @code{sh}.  You can probably get around it by running
+@code{genflags} or @code{genoutput} manually and then retrying the
+@code{make}.
+
 @html
 <p>
 <hr>
 @end html
 @heading @anchor{sparc-sun-solaris*}sparc-sun-solaris*
+On Solaris 2, executables of GCC version 2.0.2 are commonly
+available, but they have a bug that shows up when compiling current
+versions of GCC: undefined symbol errors occur during assembly if you
+use @samp{-g}.
+
+The solution is to compile the current version of GCC without
+@samp{-g}.  That makes a working compiler which you can use to recompile
+with @samp{-g}.
+
+Solaris 2 comes with a number of optional OS packages.  Some of these
+packages are needed to use GCC fully.  If you did not install all
+optional packages when installing Solaris, you will need to verify that
+the packages that GCC needs are installed.
+
+To check whether an optional package is installed, use
+the @code{pkginfo} command.  To add an optional package, use the
+@code{pkgadd} command.  For further details, see the Solaris
+documentation.
+
+For Solaris 2.0 and 2.1, GCC needs six packages: @samp{SUNWarc},
+@samp{SUNWbtool}, @samp{SUNWesu}, @samp{SUNWhea}, @samp{SUNWlibm}, and
+@samp{SUNWtoo}.
+
+For Solaris 2.2, GCC needs an additional seventh package: @samp{SUNWsprot}.
+
+On Solaris 2, trying to use the linker and other tools in
+@file{/usr/ucb} to install GCC has been observed to cause trouble.
+For example, the linker may hang indefinitely.  The fix is to remove
+@file{/usr/ucb} from your @code{PATH}.
 
 binutils 2.9.1 has known bugs on this platform. We recommend to use
 binutils 2.10 or the vendor tools (Sun as, Sun ld).
@@ -1769,6 +2914,89 @@ recognize (via @samp{uname -a}) the system as @var{sparc-*-*} instead.
 </p>
 <hr>
 @end html
+@heading @anchor{#*-*-sysv*}*-*-sysv*
+On System V release 3, you may get this error message
+while linking:
+
+@smallexample
+ld fatal: failed to write symbol name @var{something}
+ in strings table for file @var{whatever}
+@end smallexample
+
+This probably indicates that the disk is full or your ULIMIT won't allow
+the file to be as large as it needs to be.
+
+This problem can also result because the kernel parameter @code{MAXUMEM}
+is too small.  If so, you must regenerate the kernel and make the value
+much larger.  The default value is reported to be 1024; a value of 32768
+is said to work.  Smaller values may also work.
+
+On System V, if you get an error like this,
+
+@example
+/usr/local/lib/bison.simple: In function `yyparse':
+/usr/local/lib/bison.simple:625: virtual memory exhausted
+@end example
+
+@noindent
+that too indicates a problem with disk space, ULIMIT, or @code{MAXUMEM}.
+
+
+@html
+</p>
+<hr>
+@end html
+@heading @anchor{vax-dec-ultrix}vax-dec-ultrix
+Don't try compiling with Vax C (@code{vcc}).  It produces incorrect code
+in some cases (for example, when @code{alloca} is used).
+
+Meanwhile, compiling @file{cp/parse.c} with pcc does not work because of
+an internal table size limitation in that compiler.  To avoid this
+problem, compile just the GNU C compiler first, and use it to recompile
+building all the languages that you want to run.
+
+@html
+</p>
+<hr>
+@end html
+@heading @anchor{we32k-*-*}we32k-*-*
+These computers are also known as the 3b2, 3b5, 3b20 and other similar
+names.  (However, the 3b1 is actually a 68000.)
+
+Don't use @samp{-g} when compiling with the system's compiler.  The
+system's linker seems to be unable to handle such a large program with
+debugging information.
+
+The system's compiler runs out of capacity when compiling @file{stmt.c}
+in GNU CC.  You can work around this by building @file{cpp} in GNU CC
+first, then use that instead of the system's preprocessor with the
+system's C compiler to compile @file{stmt.c}.  Here is how:
+
+@smallexample
+mv /lib/cpp /lib/cpp.att
+cp cpp /lib/cpp.gnu
+echo '/lib/cpp.gnu -traditional $@{1+"$@@"@}' > /lib/cpp
+chmod +x /lib/cpp
+@end smallexample
+
+The system's compiler produces bad code for some of the GNU CC
+optimization files.  So you must build the stage 2 compiler without
+optimization.  Then build a stage 3 compiler with optimization.
+That executable should work.  Here are the necessary commands:
+
+@smallexample
+make LANGUAGES=c CC=stage1/xgcc CFLAGS="-Bstage1/ -g"
+make stage2
+make CC=stage2/xgcc CFLAGS="-Bstage2/ -g -O"
+@end smallexample
+
+You may need to raise the ULIMIT setting to build a C++ compiler,
+as the file @file{cc1plus} is larger than one megabyte.
+
+@html
+</p>
+<hr>
+@end html
 @heading @anchor{windows}Microsoft Windows (32 bit)
 
 A port of GCC 2.95.x is included with the