diff options
author | Tom Tromey <tromey@cygnus.com> | 1999-06-21 11:14:41 +0000 |
---|---|---|
committer | Tom Tromey <tromey@gcc.gnu.org> | 1999-06-21 11:14:41 +0000 |
commit | 115dabb8f316b83192d96fa6cb29a535f8ff53c0 (patch) | |
tree | 9283dce5241115a055fff30f84b014ca600b37b0 | |
parent | 48b1580ecc131e1a05995216d9cdf30bd05c17bd (diff) | |
download | gcc-115dabb8f316b83192d96fa6cb29a535f8ff53c0.zip gcc-115dabb8f316b83192d96fa6cb29a535f8ff53c0.tar.gz gcc-115dabb8f316b83192d96fa6cb29a535f8ff53c0.tar.bz2 |
configure: Rebuilt.
* configure: Rebuilt.
* configure.in: Recognize all forms of alpha.
From-SVN: r27660
-rw-r--r-- | boehm-gc/ChangeLog | 5 | ||||
-rw-r--r-- | boehm-gc/Makefile.in | 1 | ||||
-rw-r--r-- | boehm-gc/aclocal.m4 | 473 | ||||
-rwxr-xr-x | boehm-gc/configure | 511 | ||||
-rw-r--r-- | boehm-gc/configure.in | 2 |
5 files changed, 851 insertions, 141 deletions
diff --git a/boehm-gc/ChangeLog b/boehm-gc/ChangeLog index 1ef0f9a..ec184cd 100644 --- a/boehm-gc/ChangeLog +++ b/boehm-gc/ChangeLog @@ -1,3 +1,8 @@ +1999-06-21 Tom Tromey <tromey@cygnus.com> + + * configure: Rebuilt. + * configure.in: Recognize all forms of alpha. + 1999-06-17 Anthony Green <green@cygnus.com> * mach_dep.c (GC_push_regs): FreeBSD-elf support (from diff --git a/boehm-gc/Makefile.in b/boehm-gc/Makefile.in index 250f79a..0e9525f 100644 --- a/boehm-gc/Makefile.in +++ b/boehm-gc/Makefile.in @@ -83,6 +83,7 @@ MY_CFLAGS = @MY_CFLAGS@ NM = @NM@ PACKAGE = @PACKAGE@ RANLIB = @RANLIB@ +USE_SYMBOL_UNDERSCORE = @USE_SYMBOL_UNDERSCORE@ VERSION = @VERSION@ addobjs = @addobjs@ boehm_gc_basedir = @boehm_gc_basedir@ diff --git a/boehm-gc/aclocal.m4 b/boehm-gc/aclocal.m4 index 82da4b6..000a326 100644 --- a/boehm-gc/aclocal.m4 +++ b/boehm-gc/aclocal.m4 @@ -290,26 +290,58 @@ else fi]) -# serial 25 AM_PROG_LIBTOOL -AC_DEFUN(AM_PROG_LIBTOOL, -[AC_REQUIRE([AM_ENABLE_SHARED])dnl -AC_REQUIRE([AM_ENABLE_STATIC])dnl +# serial 35 AC_PROG_LIBTOOL +AC_DEFUN(AC_PROG_LIBTOOL, +[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl + +# Save cache, so that ltconfig can load it +AC_CACHE_SAVE + +# Actually configure libtool. ac_aux_dir is where install-sh is found. +CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \ +LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \ +DLLTOOL="$DLLTOOL" AS="$AS" \ +${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \ +$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \ +|| AC_MSG_ERROR([libtool configure failed]) + +# Reload cache, that may have been modified by ltconfig +AC_CACHE_LOAD + +# This can be used to rebuild libtool when needed +LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh" + +# Always use our own libtool. +LIBTOOL='$(SHELL) $(top_builddir)/libtool' +AC_SUBST(LIBTOOL)dnl + +# Redirect the config.log output again, so that the ltconfig log is not +# clobbered by the next message. +exec 5>>./config.log +]) + +AC_DEFUN(AC_LIBTOOL_SETUP, +[AC_PREREQ(2.13)dnl +AC_REQUIRE([AC_ENABLE_SHARED])dnl +AC_REQUIRE([AC_ENABLE_STATIC])dnl +AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl AC_REQUIRE([AC_PROG_RANLIB])dnl AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AM_PROG_LD])dnl -AC_REQUIRE([AM_PROG_NM])dnl +AC_REQUIRE([AC_PROG_LD])dnl +AC_REQUIRE([AC_PROG_NM])dnl +AC_REQUIRE([AC_SYS_NM_PARSE])dnl +AC_REQUIRE([AC_SYS_SYMBOL_UNDERSCORE])dnl AC_REQUIRE([AC_PROG_LN_S])dnl dnl -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool' -AC_SUBST(LIBTOOL)dnl # Check for any special flags to pass to ltconfig. -libtool_flags= +libtool_flags="--cache-file=$cache_file" test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared" test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static" +test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install" +test "$lt_dlopen" = yes && libtool_flags="$libtool_flags --enable-dlopen" test "$silent" = yes && libtool_flags="$libtool_flags --silent" test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc" test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld" @@ -338,37 +370,46 @@ case "$host" in *-*-sco3.2v5*) # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" + AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, + [AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])]) + if test x"$lt_cv_cc_needs_belf" != x"yes"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf + CFLAGS="$SAVE_CFLAGS" + fi ;; -*-*-cygwin32*) - AM_SYS_LIBTOOL_CYGWIN32 +*-*-cygwin*) + AC_SYS_LIBTOOL_CYGWIN ;; esac -# Actually configure libtool. ac_aux_dir is where install-sh is found. -CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \ -LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \ -DLLTOOL="$DLLTOOL" AS="$AS" \ -${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \ -$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \ -|| AC_MSG_ERROR([libtool configure failed]) +# enable the --disable-libtool-lock switch -# Redirect the config.log output again, so that the ltconfig log is not -# clobbered by the next message. -exec 5>>./config.log +AC_ARG_ENABLE(libtool-lock, +[ --disable-libtool-lock force libtool not to do file locking], +need_locks=$enableval, +need_locks=yes) + +if test x"$need_locks" = xno; then + libtool_flags="$libtool_flags --disable-lock" +fi ]) -# AM_ENABLE_SHARED - implement the --enable-shared flag -# Usage: AM_ENABLE_SHARED[(DEFAULT)] +# AC_LIBTOOL_DLOPEN - check for dlopen support +AC_DEFUN(AC_LIBTOOL_DLOPEN, [lt_dlopen=yes]) + +# AC_ENABLE_SHARED - implement the --enable-shared flag +# Usage: AC_ENABLE_SHARED[(DEFAULT)] # Where DEFAULT is either `yes' or `no'. If omitted, it defaults to # `yes'. -AC_DEFUN(AM_ENABLE_SHARED, -[define([AM_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl +AC_DEFUN(AC_ENABLE_SHARED, +[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl AC_ARG_ENABLE(shared, changequote(<<, >>)dnl -<< --enable-shared[=PKGS] build shared libraries [default=>>AM_ENABLE_SHARED_DEFAULT], +<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT], changequote([, ])dnl [p=${PACKAGE-default} case "$enableval" in @@ -386,26 +427,22 @@ no) enable_shared=no ;; IFS="$ac_save_ifs" ;; esac], -enable_shared=AM_ENABLE_SHARED_DEFAULT)dnl +enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl ]) -# AM_DISABLE_SHARED - set the default shared flag to --disable-shared -AC_DEFUN(AM_DISABLE_SHARED, -[AM_ENABLE_SHARED(no)]) - -# AM_DISABLE_STATIC - set the default static flag to --disable-static -AC_DEFUN(AM_DISABLE_STATIC, -[AM_ENABLE_STATIC(no)]) +# AC_DISABLE_SHARED - set the default shared flag to --disable-shared +AC_DEFUN(AC_DISABLE_SHARED, +[AC_ENABLE_SHARED(no)]) -# AM_ENABLE_STATIC - implement the --enable-static flag -# Usage: AM_ENABLE_STATIC[(DEFAULT)] +# AC_ENABLE_STATIC - implement the --enable-static flag +# Usage: AC_ENABLE_STATIC[(DEFAULT)] # Where DEFAULT is either `yes' or `no'. If omitted, it defaults to # `yes'. -AC_DEFUN(AM_ENABLE_STATIC, -[define([AM_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl +AC_DEFUN(AC_ENABLE_STATIC, +[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl AC_ARG_ENABLE(static, changequote(<<, >>)dnl -<< --enable-static[=PKGS] build static libraries [default=>>AM_ENABLE_STATIC_DEFAULT], +<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT], changequote([, ])dnl [p=${PACKAGE-default} case "$enableval" in @@ -423,28 +460,74 @@ no) enable_static=no ;; IFS="$ac_save_ifs" ;; esac], -enable_static=AM_ENABLE_STATIC_DEFAULT)dnl +enable_static=AC_ENABLE_STATIC_DEFAULT)dnl ]) +# AC_DISABLE_STATIC - set the default static flag to --disable-static +AC_DEFUN(AC_DISABLE_STATIC, +[AC_ENABLE_STATIC(no)]) -# AM_PROG_LD - find the path to the GNU or non-GNU linker -AC_DEFUN(AM_PROG_LD, + +# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag +# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)] +# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to +# `yes'. +AC_DEFUN(AC_ENABLE_FAST_INSTALL, +[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl +AC_ARG_ENABLE(fast-install, +changequote(<<, >>)dnl +<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT], +changequote([, ])dnl +[p=${PACKAGE-default} +case "$enableval" in +yes) enable_fast_install=yes ;; +no) enable_fast_install=no ;; +*) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," + for pkg in $enableval; do + if test "X$pkg" = "X$p"; then + enable_fast_install=yes + fi + done + IFS="$ac_save_ifs" + ;; +esac], +enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl +]) + +# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install +AC_DEFUN(AC_DISABLE_FAST_INSTALL, +[AC_ENABLE_FAST_INSTALL(no)]) + + +# AC_PROG_LD - find the path to the GNU or non-GNU linker +AC_DEFUN(AC_PROG_LD, [AC_ARG_WITH(gnu-ld, [ --with-gnu-ld assume the C compiler uses GNU ld [default=no]], test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no) -AC_REQUIRE([AC_PROG_CC]) +AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl ac_prog=ld if test "$ac_cv_prog_gcc" = yes; then # Check if gcc -print-prog-name=ld gives a path. AC_MSG_CHECKING([for ld used by GCC]) ac_prog=`($CC -print-prog-name=ld) 2>&5` case "$ac_prog" in - # Accept absolute paths. + # Accept absolute paths. changequote(,)dnl - /* | [A-Za-z]:\\*) + /* | [A-Za-z]:[\\/]*) + re_direlt='/[^/][^/]*/\.\./' changequote([,])dnl - test -z "$LD" && LD="$ac_prog" - ;; + # Canonicalize the path of ld + ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` + while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do + ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld @@ -472,7 +555,7 @@ AC_CACHE_VAL(ac_cv_path_LD, if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then test "$with_gnu_ld" != no && break else - test "$with_gnu_ld" != yes && break + test "$with_gnu_ld" != yes && break fi fi done @@ -488,10 +571,10 @@ else fi test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) AC_SUBST(LD) -AM_PROG_LD_GNU +AC_PROG_LD_GNU ]) -AC_DEFUN(AM_PROG_LD_GNU, +AC_DEFUN(AC_PROG_LD_GNU, [AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld, [# I'd rather use --version here, but apparently some GNU ld's only accept -v. if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then @@ -501,8 +584,8 @@ else fi]) ]) -# AM_PROG_NM - find the path to a BSD-compatible name lister -AC_DEFUN(AM_PROG_NM, +# AC_PROG_NM - find the path to a BSD-compatible name lister +AC_DEFUN(AC_PROG_NM, [AC_MSG_CHECKING([for BSD-compatible nm]) AC_CACHE_VAL(ac_cv_path_NM, [if test -n "$NM"; then @@ -510,20 +593,22 @@ AC_CACHE_VAL(ac_cv_path_NM, ac_cv_path_NM="$NM" else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in /usr/ucb /usr/ccs/bin $PATH /bin; do + for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/nm; then # Check to see if the nm accepts a BSD-compat flag. # Adding the `sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - ac_cv_path_NM="$ac_dir/nm -B" + ac_cv_path_NM="$ac_dir/nm -B" + break elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - ac_cv_path_NM="$ac_dir/nm -p" + ac_cv_path_NM="$ac_dir/nm -p" + break else - ac_cv_path_NM="$ac_dir/nm" + ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags fi - break fi done IFS="$ac_save_ifs" @@ -534,9 +619,277 @@ AC_MSG_RESULT([$NM]) AC_SUBST(NM) ]) -# AM_SYS_LIBTOOL_CYGWIN32 - find tools needed on cygwin32 -AC_DEFUN(AM_SYS_LIBTOOL_CYGWIN32, +# AC_SYS_NM_PARSE - Check for command to grab the raw symbol name followed +# by C symbol name from nm. +AC_DEFUN(AC_SYS_NM_PARSE, +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_PROG_NM])dnl +# Check for command to grab the raw symbol name followed by C symbol from nm. +AC_MSG_CHECKING([command to parse $NM output]) +AC_CACHE_VAL(ac_cv_sys_global_symbol_pipe, +[# These are sane defaults that work on at least a few old systems. +# {They come from Ultrix. What could be older than Ultrix?!! ;)} + +changequote(,)dnl +# Character class describing NM global symbol codes. +ac_symcode='[BCDEGRST]' + +# Regexp to match symbols that can be accessed directly from C. +ac_sympat='\([_A-Za-z][_A-Za-z0-9]*\)' + +# Transform the above into a raw symbol and a C symbol. +ac_symxfrm='\1 \2\3 \3' + +# Transform an extracted symbol line into a proper C declaration +ac_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'" + +# Define system-specific variables. +case "$host_os" in +aix*) + ac_symcode='[BCDT]' + ;; +cygwin* | mingw*) + ac_symcode='[ABCDGISTW]' + ;; +hpux*) + ac_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^. .* \(.*\)$/extern char \1;/p'" + ;; +irix*) + ac_symcode='[BCDEGRST]' + ;; +solaris*) + ac_symcode='[BDT]' + ;; +esac + +# If we're using GNU nm, then use its standard symbol codes. +if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then + ac_symcode='[ABCDGISTW]' +fi +changequote([,])dnl + +# Try without a prefix undercore, then with it. +for ac_symprfx in "" "_"; do + + ac_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($ac_symcode\)[ ][ ]*\($ac_symprfx\)$ac_sympat$/$ac_symxfrm/p'" + + # Check to see that the pipe works correctly. + ac_pipe_works=no + rm -f conftest.$ac_ext + cat > conftest.$ac_ext <<EOF +#ifdef __cplusplus +extern "C" { +#endif +char nm_test_var; +void nm_test_func(){} +#ifdef __cplusplus +} +#endif +int main(){nm_test_var='a';nm_test_func;return 0;} +EOF + + if AC_TRY_EVAL(ac_compile); then + # Now try to grab the symbols. + ac_nlist=conftest.nm + + if AC_TRY_EVAL(NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) && test -s "$ac_nlist"; then + + # Try sorting and uniquifying the output. + if sort "$ac_nlist" | uniq > "$ac_nlist"T; then + mv -f "$ac_nlist"T "$ac_nlist" + else + rm -f "$ac_nlist"T + fi + + # Make sure that we snagged all the symbols we need. + if egrep ' nm_test_var$' "$ac_nlist" >/dev/null; then + if egrep ' nm_test_func$' "$ac_nlist" >/dev/null; then + cat <<EOF > conftest.c +#ifdef __cplusplus +extern "C" { +#endif + +EOF + # Now generate the symbol file. + eval "$ac_global_symbol_to_cdecl"' < "$ac_nlist" >> conftest.c' + + cat <<EOF >> conftest.c +#if defined (__STDC__) && __STDC__ +# define lt_ptr_t void * +#else +# define lt_ptr_t char * +# define const +#endif + +/* The mapping between symbol names and symbols. */ +const struct { + const char *name; + lt_ptr_t address; +} +changequote(,)dnl +lt_preloaded_symbols[] = +changequote([,])dnl +{ +EOF + sed 's/^. \(.*\) \(.*\)$/ {"\2", (lt_ptr_t) \&\2},/' < "$ac_nlist" >> conftest.c + cat <<\EOF >> conftest.c + {0, (lt_ptr_t) 0} +}; + +#ifdef __cplusplus +} +#endif +EOF + # Now try linking the two files. + mv conftest.$ac_objext conftestm.$ac_objext + ac_save_LIBS="$LIBS" + ac_save_CFLAGS="$CFLAGS" + LIBS="conftestm.$ac_objext" + CFLAGS="$CFLAGS$no_builtin_flag" + if AC_TRY_EVAL(ac_link) && test -s conftest; then + ac_pipe_works=yes + else + echo "configure: failed program was:" >&AC_FD_CC + cat conftest.c >&AC_FD_CC + fi + LIBS="$ac_save_LIBS" + CFLAGS="$ac_save_CFLAGS" + else + echo "cannot find nm_test_func in $ac_nlist" >&AC_FD_CC + fi + else + echo "cannot find nm_test_var in $ac_nlist" >&AC_FD_CC + fi + else + echo "cannot run $ac_cv_sys_global_symbol_pipe" >&AC_FD_CC + fi + else + echo "$progname: failed program was:" >&AC_FD_CC + cat conftest.c >&AC_FD_CC + fi + rm -rf conftest* + + # Do not use the global_symbol_pipe unless it works. + if test "$ac_pipe_works" = yes; then + if test x"$ac_symprfx" = x"_"; then + ac_cv_sys_symbol_underscore=yes + else + ac_cv_sys_symbol_underscore=no + fi + break + else + ac_cv_sys_global_symbol_pipe= + fi +done +]) + +ac_result=yes +if test -z "$ac_cv_sys_global_symbol_pipe"; then + ac_result=no +fi +AC_MSG_RESULT($ac_result) +]) + +# AC_SYS_LIBTOOL_CYGWIN - find tools needed on cygwin +AC_DEFUN(AC_SYS_LIBTOOL_CYGWIN, [AC_CHECK_TOOL(DLLTOOL, dlltool, false) AC_CHECK_TOOL(AS, as, false) ]) +# AC_SYS_SYMBOL_UNDERSCORE - does the compiler prefix global symbols +# with an underscore? +AC_DEFUN(AC_SYS_SYMBOL_UNDERSCORE, +[AC_REQUIRE([AC_PROG_NM])dnl +AC_REQUIRE([AC_SYS_NM_PARSE])dnl +AC_MSG_CHECKING([for _ prefix in compiled symbols]) +AC_CACHE_VAL(ac_cv_sys_symbol_underscore, +[ac_cv_sys_symbol_underscore=no +cat > conftest.$ac_ext <<EOF +void nm_test_func(){} +int main(){nm_test_func;return 0;} +EOF +if AC_TRY_EVAL(ac_compile); then + # Now try to grab the symbols. + ac_nlist=conftest.nm + if AC_TRY_EVAL(NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) && test -s "$ac_nlist"; then + # See whether the symbols have a leading underscore. + if egrep '^. _nm_test_func' "$ac_nlist" >/dev/null; then + ac_cv_sys_symbol_underscore=yes + else + if egrep '^. nm_test_func ' "$ac_nlist" >/dev/null; then + : + else + echo "configure: cannot find nm_test_func in $ac_nlist" >&AC_FD_CC + fi + fi + else + echo "configure: cannot run $ac_cv_sys_global_symbol_pipe" >&AC_FD_CC + fi +else + echo "configure: failed program was:" >&AC_FD_CC + cat conftest.c >&AC_FD_CC +fi +rm -rf conftest* +]) +AC_MSG_RESULT($ac_cv_sys_symbol_underscore) +USE_SYMBOL_UNDERSCORE=${ac_cv_sys_symbol_underscore=no} +AC_SUBST(USE_SYMBOL_UNDERSCORE)dnl +]) + +# AC_CHECK_LIBM - check for math library +AC_DEFUN(AC_CHECK_LIBM, [ +AC_CHECK_LIB(mw, _mwvalidcheckl) +AC_CHECK_LIB(m, cos) +]) + +# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for +# the libltdl convenience library, adds --enable-ltdl-convenience to +# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor +# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed +# to be `${top_builddir}/libltdl'. Make sure you start DIR with +# '${top_builddir}/' (note the single quotes!) if your package is not +# flat, and, if you're not using automake, define top_builddir as +# appropriate in the Makefiles. +AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [ + case "$enable_ltdl_convenience" in + no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; + "") enable_ltdl_convenience=yes + ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; + esac + LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdlc.la +]) + +# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for +# the libltdl installable library, and adds --enable-ltdl-install to +# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor +# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed +# to be `${top_builddir}/libltdl'. Make sure you start DIR with +# '${top_builddir}/' (note the single quotes!) if your package is not +# flat, and, if you're not using automake, define top_builddir as +# appropriate in the Makefiles. +# In the future, this macro may have to be called after AC_PROG_LIBTOOL. +AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [ + AC_CHECK_LIB(ltdl, main, LIBLTDL="-lltdl", [ + case "$enable_ltdl_install" in + no) AC_MSG_WARN([libltdl not installed, but installation disabled]) ;; + "") enable_ltdl_install=yes + ac_configure_args="$ac_configure_args --enable-ltdl-install" ;; + esac + ]) + if test x"$enable_ltdl_install" != x"no"; then + LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la + fi +]) + +dnl old names +AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl +AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl +AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl +AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl +AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl +AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl +AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl +AC_DEFUN(AM_SYS_NM_PARSE, [indir([AC_SYS_NM_PARSE])])dnl +AC_DEFUN(AM_SYS_SYMBOL_UNDERSCORE, [indir([AC_SYS_SYMBOL_UNDERSCORE])])dnl +AC_DEFUN(AM_SYS_LIBTOOL_CYGWIN, [indir([AC_SYS_LIBTOOL_CYGWIN])])dnl + diff --git a/boehm-gc/configure b/boehm-gc/configure index 3e40791..9fb2597 100755 --- a/boehm-gc/configure +++ b/boehm-gc/configure @@ -21,8 +21,12 @@ ac_help="$ac_help ac_help="$ac_help --enable-static[=PKGS] build static libraries [default=yes]" ac_help="$ac_help + --enable-fast-install[=PKGS] optimize for fast installation [default=yes]" +ac_help="$ac_help --with-gnu-ld assume the C compiler uses GNU ld [default=no]" ac_help="$ac_help + --disable-libtool-lock force libtool not to do file locking" +ac_help="$ac_help --with-target-subdir=SUBDIR Configuring with a cross compiler" ac_help="$ac_help --with-cross-host=HOST Configuring with a cross compiler" @@ -594,7 +598,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:598: checking host system type" >&5 +echo "configure:602: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -615,7 +619,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:619: checking target system type" >&5 +echo "configure:623: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -633,7 +637,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:637: checking build system type" >&5 +echo "configure:641: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -668,7 +672,7 @@ test "$host_alias" != "$target_alias" && # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:672: checking for a BSD compatible install" >&5 +echo "configure:676: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -721,7 +725,7 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6 -echo "configure:725: checking whether build environment is sane" >&5 +echo "configure:729: checking whether build environment is sane" >&5 # Just in case sleep 1 echo timestamp > conftestfile @@ -778,7 +782,7 @@ test "$program_suffix" != NONE && test "$program_transform_name" = "" && program_transform_name="s,x,x," echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:782: checking whether ${MAKE-make} sets \${MAKE}" >&5 +echo "configure:786: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -811,12 +815,12 @@ else fi echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6 -echo "configure:815: checking for Cygwin environment" >&5 +echo "configure:819: checking for Cygwin environment" >&5 if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 820 "configure" +#line 824 "configure" #include "confdefs.h" int main() { @@ -827,7 +831,7 @@ int main() { return __CYGWIN__; ; return 0; } EOF -if { (eval echo configure:831: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:835: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_cygwin=yes else @@ -844,19 +848,19 @@ echo "$ac_t""$ac_cv_cygwin" 1>&6 CYGWIN= test "$ac_cv_cygwin" = yes && CYGWIN=yes echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6 -echo "configure:848: checking for mingw32 environment" >&5 +echo "configure:852: checking for mingw32 environment" >&5 if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 853 "configure" +#line 857 "configure" #include "confdefs.h" int main() { return __MINGW32__; ; return 0; } EOF -if { (eval echo configure:860: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:864: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_mingw32=yes else @@ -904,7 +908,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:908: checking host system type" >&5 +echo "configure:912: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -938,7 +942,7 @@ fi missing_dir=`cd $ac_aux_dir && pwd` echo $ac_n "checking for working aclocal""... $ac_c" 1>&6 -echo "configure:942: checking for working aclocal" >&5 +echo "configure:946: checking for working aclocal" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -951,7 +955,7 @@ else fi echo $ac_n "checking for working autoconf""... $ac_c" 1>&6 -echo "configure:955: checking for working autoconf" >&5 +echo "configure:959: checking for working autoconf" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -964,7 +968,7 @@ else fi echo $ac_n "checking for working automake""... $ac_c" 1>&6 -echo "configure:968: checking for working automake" >&5 +echo "configure:972: checking for working automake" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -977,7 +981,7 @@ else fi echo $ac_n "checking for working autoheader""... $ac_c" 1>&6 -echo "configure:981: checking for working autoheader" >&5 +echo "configure:985: checking for working autoheader" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -990,7 +994,7 @@ else fi echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6 -echo "configure:994: checking for working makeinfo" >&5 +echo "configure:998: checking for working makeinfo" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -1015,7 +1019,7 @@ fi # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1019: checking for $ac_word" >&5 +echo "configure:1023: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1045,7 +1049,7 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1049: checking for $ac_word" >&5 +echo "configure:1053: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1094,7 +1098,7 @@ fi fi echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:1098: checking whether we are using GNU C" >&5 +echo "configure:1102: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1103,7 +1107,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1107: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1111: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -1118,7 +1122,7 @@ if test $ac_cv_prog_gcc = yes; then ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:1122: checking whether ${CC-cc} accepts -g" >&5 +echo "configure:1126: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1154,7 +1158,7 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1158: checking for $ac_word" >&5 +echo "configure:1162: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CXX'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1187,7 +1191,7 @@ test -n "$CXX" || CXX="gcc" test -z "$CXX" && { echo "configure: error: no acceptable c++ found in \$PATH" 1>&2; exit 1; } echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6 -echo "configure:1191: checking whether we are using GNU C++" >&5 +echo "configure:1195: checking whether we are using GNU C++" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1196,7 +1200,7 @@ else yes; #endif EOF -if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:1200: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:1204: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gxx=yes else ac_cv_prog_gxx=no @@ -1211,7 +1215,7 @@ if test $ac_cv_prog_gxx = yes; then ac_save_CXXFLAGS="$CXXFLAGS" CXXFLAGS= echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6 -echo "configure:1215: checking whether ${CXX-g++} accepts -g" >&5 +echo "configure:1219: checking whether ${CXX-g++} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1244,7 +1248,7 @@ fi # NEWLIB_CONFIGURE, which doesn't work because that means that it will # be run before AC_CANONICAL_HOST. echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:1248: checking build system type" >&5 +echo "configure:1252: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -1265,7 +1269,7 @@ echo "$ac_t""$build" 1>&6 # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args. set dummy ${ac_tool_prefix}as; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1269: checking for $ac_word" >&5 +echo "configure:1273: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1297,7 +1301,7 @@ fi # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. set dummy ${ac_tool_prefix}ar; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1301: checking for $ac_word" >&5 +echo "configure:1305: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1329,7 +1333,7 @@ fi # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. set dummy ${ac_tool_prefix}ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1333: checking for $ac_word" >&5 +echo "configure:1337: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1361,7 +1365,7 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1365: checking for $ac_word" >&5 +echo "configure:1369: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1406,7 +1410,7 @@ fi # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:1410: checking for a BSD compatible install" >&5 +echo "configure:1414: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -1460,7 +1464,7 @@ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6 -echo "configure:1464: checking whether to enable maintainer-specific portions of Makefiles" >&5 +echo "configure:1468: checking whether to enable maintainer-specific portions of Makefiles" >&5 # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. if test "${enable_maintainer_mode+set}" = set; then enableval="$enable_maintainer_mode" @@ -1494,7 +1498,7 @@ if false; then echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 -echo "configure:1498: checking for executable suffix" >&5 +echo "configure:1502: checking for executable suffix" >&5 if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1504,7 +1508,7 @@ else rm -f conftest* echo 'int main () { return 0; }' > conftest.$ac_ext ac_cv_exeext= - if { (eval echo configure:1508: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then + if { (eval echo configure:1512: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then for file in conftest.*; do case $file in *.c | *.o | *.obj | *.ilk | *.pdb) ;; @@ -1592,10 +1596,33 @@ else enable_static=yes fi +# Check whether --enable-fast-install or --disable-fast-install was given. +if test "${enable_fast_install+set}" = set; then + enableval="$enable_fast_install" + p=${PACKAGE-default} +case "$enableval" in +yes) enable_fast_install=yes ;; +no) enable_fast_install=no ;; +*) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," + for pkg in $enableval; do + if test "X$pkg" = "X$p"; then + enable_fast_install=yes + fi + done + IFS="$ac_save_ifs" + ;; +esac +else + enable_fast_install=yes +fi + # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1599: checking for $ac_word" >&5 +echo "configure:1626: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1625,7 +1652,7 @@ fi # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1629: checking for $ac_word" >&5 +echo "configure:1656: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1655,7 +1682,7 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1659: checking for $ac_word" >&5 +echo "configure:1686: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1706,7 +1733,7 @@ fi # Extract the first word of "cl", so it can be a program name with args. set dummy cl; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1710: checking for $ac_word" >&5 +echo "configure:1737: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1738,7 +1765,7 @@ fi fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:1742: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:1769: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. @@ -1749,12 +1776,12 @@ cross_compiling=$ac_cv_prog_cc_cross cat > conftest.$ac_ext << EOF -#line 1753 "configure" +#line 1780 "configure" #include "confdefs.h" main(){return(0);} EOF -if { (eval echo configure:1758: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1785: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -1780,12 +1807,12 @@ if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:1784: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:1811: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:1789: checking whether we are using GNU C" >&5 +echo "configure:1816: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1794,7 +1821,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1798: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1825: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -1813,7 +1840,7 @@ ac_test_CFLAGS="${CFLAGS+set}" ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:1817: checking whether ${CC-cc} accepts -g" >&5 +echo "configure:1844: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1852,18 +1879,23 @@ else with_gnu_ld=no fi - ac_prog=ld if test "$ac_cv_prog_gcc" = yes; then # Check if gcc -print-prog-name=ld gives a path. echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6 -echo "configure:1861: checking for ld used by GCC" >&5 +echo "configure:1887: checking for ld used by GCC" >&5 ac_prog=`($CC -print-prog-name=ld) 2>&5` case "$ac_prog" in - # Accept absolute paths. - /* | [A-Za-z]:\\*) - test -z "$LD" && LD="$ac_prog" - ;; + # Accept absolute paths. + /* | [A-Za-z]:[\\/]*) + re_direlt='/[^/][^/]*/\.\./' + # Canonicalize the path of ld + ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` + while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do + ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld @@ -1875,10 +1907,10 @@ echo "configure:1861: checking for ld used by GCC" >&5 esac elif test "$with_gnu_ld" = yes; then echo $ac_n "checking for GNU ld""... $ac_c" 1>&6 -echo "configure:1879: checking for GNU ld" >&5 +echo "configure:1911: checking for GNU ld" >&5 else echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6 -echo "configure:1882: checking for non-GNU ld" >&5 +echo "configure:1914: checking for non-GNU ld" >&5 fi if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -1895,7 +1927,7 @@ else if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then test "$with_gnu_ld" != no && break else - test "$with_gnu_ld" != yes && break + test "$with_gnu_ld" != yes && break fi fi done @@ -1914,7 +1946,7 @@ fi test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; } echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6 -echo "configure:1918: checking if the linker ($LD) is GNU ld" >&5 +echo "configure:1950: checking if the linker ($LD) is GNU ld" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1930,7 +1962,7 @@ echo "$ac_t""$ac_cv_prog_gnu_ld" 1>&6 echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6 -echo "configure:1934: checking for BSD-compatible nm" >&5 +echo "configure:1966: checking for BSD-compatible nm" >&5 if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1939,20 +1971,22 @@ else ac_cv_path_NM="$NM" else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in /usr/ucb /usr/ccs/bin $PATH /bin; do + for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/nm; then # Check to see if the nm accepts a BSD-compat flag. # Adding the `sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - ac_cv_path_NM="$ac_dir/nm -B" + ac_cv_path_NM="$ac_dir/nm -B" + break elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - ac_cv_path_NM="$ac_dir/nm -p" + ac_cv_path_NM="$ac_dir/nm -p" + break else - ac_cv_path_NM="$ac_dir/nm" + ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags fi - break fi done IFS="$ac_save_ifs" @@ -1964,8 +1998,212 @@ NM="$ac_cv_path_NM" echo "$ac_t""$NM" 1>&6 +# Check for command to grab the raw symbol name followed by C symbol from nm. +echo $ac_n "checking command to parse $NM output""... $ac_c" 1>&6 +echo "configure:2004: checking command to parse $NM output" >&5 +if eval "test \"`echo '$''{'ac_cv_sys_global_symbol_pipe'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + # These are sane defaults that work on at least a few old systems. +# {They come from Ultrix. What could be older than Ultrix?!! ;)} + +# Character class describing NM global symbol codes. +ac_symcode='[BCDEGRST]' + +# Regexp to match symbols that can be accessed directly from C. +ac_sympat='\([_A-Za-z][_A-Za-z0-9]*\)' + +# Transform the above into a raw symbol and a C symbol. +ac_symxfrm='\1 \2\3 \3' + +# Transform an extracted symbol line into a proper C declaration +ac_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'" + +# Define system-specific variables. +case "$host_os" in +aix*) + ac_symcode='[BCDT]' + ;; +cygwin* | mingw*) + ac_symcode='[ABCDGISTW]' + ;; +hpux*) + ac_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^. .* \(.*\)$/extern char \1;/p'" + ;; +irix*) + ac_symcode='[BCDEGRST]' + ;; +solaris*) + ac_symcode='[BDT]' + ;; +esac + +# If we're using GNU nm, then use its standard symbol codes. +if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then + ac_symcode='[ABCDGISTW]' +fi + +# Try without a prefix undercore, then with it. +for ac_symprfx in "" "_"; do + + ac_cv_sys_global_symbol_pipe="sed -n -e 's/^.* \($ac_symcode\) *\($ac_symprfx\)$ac_sympat$/$ac_symxfrm/p'" + + # Check to see that the pipe works correctly. + ac_pipe_works=no + rm -f conftest.$ac_ext + cat > conftest.$ac_ext <<EOF +#ifdef __cplusplus +extern "C" { +#endif +char nm_test_var; +void nm_test_func(){} +#ifdef __cplusplus +} +#endif +int main(){nm_test_var='a';nm_test_func;return 0;} +EOF + + if { (eval echo configure:2067: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + # Now try to grab the symbols. + ac_nlist=conftest.nm + + if { (eval echo configure:2071: \"$NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist\") 1>&5; (eval $NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) 2>&5; } && test -s "$ac_nlist"; then + + # Try sorting and uniquifying the output. + if sort "$ac_nlist" | uniq > "$ac_nlist"T; then + mv -f "$ac_nlist"T "$ac_nlist" + else + rm -f "$ac_nlist"T + fi + + # Make sure that we snagged all the symbols we need. + if egrep ' nm_test_var$' "$ac_nlist" >/dev/null; then + if egrep ' nm_test_func$' "$ac_nlist" >/dev/null; then + cat <<EOF > conftest.c +#ifdef __cplusplus +extern "C" { +#endif + +EOF + # Now generate the symbol file. + eval "$ac_global_symbol_to_cdecl"' < "$ac_nlist" >> conftest.c' + + cat <<EOF >> conftest.c +#if defined (__STDC__) && __STDC__ +# define lt_ptr_t void * +#else +# define lt_ptr_t char * +# define const +#endif + +/* The mapping between symbol names and symbols. */ +const struct { + const char *name; + lt_ptr_t address; +} +lt_preloaded_symbols[] = +{ +EOF + sed 's/^. \(.*\) \(.*\)$/ {"\2", (lt_ptr_t) \&\2},/' < "$ac_nlist" >> conftest.c + cat <<\EOF >> conftest.c + {0, (lt_ptr_t) 0} +}; + +#ifdef __cplusplus +} +#endif +EOF + # Now try linking the two files. + mv conftest.$ac_objext conftestm.$ac_objext + ac_save_LIBS="$LIBS" + ac_save_CFLAGS="$CFLAGS" + LIBS="conftestm.$ac_objext" + CFLAGS="$CFLAGS$no_builtin_flag" + if { (eval echo configure:2123: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then + ac_pipe_works=yes + else + echo "configure: failed program was:" >&5 + cat conftest.c >&5 + fi + LIBS="$ac_save_LIBS" + CFLAGS="$ac_save_CFLAGS" + else + echo "cannot find nm_test_func in $ac_nlist" >&5 + fi + else + echo "cannot find nm_test_var in $ac_nlist" >&5 + fi + else + echo "cannot run $ac_cv_sys_global_symbol_pipe" >&5 + fi + else + echo "$progname: failed program was:" >&5 + cat conftest.c >&5 + fi + rm -rf conftest* + + # Do not use the global_symbol_pipe unless it works. + if test "$ac_pipe_works" = yes; then + if test x"$ac_symprfx" = x"_"; then + ac_cv_sys_symbol_underscore=yes + else + ac_cv_sys_symbol_underscore=no + fi + break + else + ac_cv_sys_global_symbol_pipe= + fi +done + +fi + + +ac_result=yes +if test -z "$ac_cv_sys_global_symbol_pipe"; then + ac_result=no +fi +echo "$ac_t""$ac_result" 1>&6 + +echo $ac_n "checking for _ prefix in compiled symbols""... $ac_c" 1>&6 +echo "configure:2169: checking for _ prefix in compiled symbols" >&5 +if eval "test \"`echo '$''{'ac_cv_sys_symbol_underscore'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_cv_sys_symbol_underscore=no +cat > conftest.$ac_ext <<EOF +void nm_test_func(){} +int main(){nm_test_func;return 0;} +EOF +if { (eval echo configure:2178: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + # Now try to grab the symbols. + ac_nlist=conftest.nm + if { (eval echo configure:2181: \"$NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist\") 1>&5; (eval $NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) 2>&5; } && test -s "$ac_nlist"; then + # See whether the symbols have a leading underscore. + if egrep '^. _nm_test_func' "$ac_nlist" >/dev/null; then + ac_cv_sys_symbol_underscore=yes + else + if egrep '^. nm_test_func ' "$ac_nlist" >/dev/null; then + : + else + echo "configure: cannot find nm_test_func in $ac_nlist" >&5 + fi + fi + else + echo "configure: cannot run $ac_cv_sys_global_symbol_pipe" >&5 + fi +else + echo "configure: failed program was:" >&5 + cat conftest.c >&5 +fi +rm -rf conftest* + +fi + +echo "$ac_t""$ac_cv_sys_symbol_underscore" 1>&6 +USE_SYMBOL_UNDERSCORE=${ac_cv_sys_symbol_underscore=no} + echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6 -echo "configure:1969: checking whether ln -s works" >&5 +echo "configure:2207: checking whether ln -s works" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1985,13 +2223,13 @@ else echo "$ac_t""no" 1>&6 fi -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool' # Check for any special flags to pass to ltconfig. -libtool_flags= +libtool_flags="--cache-file=$cache_file" test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared" test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static" +test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install" +test "$lt_dlopen" = yes && libtool_flags="$libtool_flags --enable-dlopen" test "$silent" = yes && libtool_flags="$libtool_flags --silent" test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc" test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld" @@ -2001,8 +2239,8 @@ test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld" case "$host" in *-*-irix6*) # Find out which ABI we are using. - echo '#line 2005 "configure"' > conftest.$ac_ext - if { (eval echo configure:2006: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + echo '#line 2243 "configure"' > conftest.$ac_ext + if { (eval echo configure:2244: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then case "`/usr/bin/file conftest.o`" in *32-bit*) LD="${LD-ld} -32" @@ -2020,14 +2258,45 @@ case "$host" in *-*-sco3.2v5*) # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" + echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6 +echo "configure:2265: checking whether the C compiler needs -belf" >&5 +if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 2270 "configure" +#include "confdefs.h" + +int main() { + +; return 0; } +EOF +if { (eval echo configure:2277: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + lt_cv_cc_needs_belf=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + lt_cv_cc_needs_belf=no +fi +rm -f conftest* +fi + +echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6 + if test x"$lt_cv_cc_needs_belf" != x"yes"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf + CFLAGS="$SAVE_CFLAGS" + fi ;; -*-*-cygwin32*) +*-*-cygwin*) # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. set dummy ${ac_tool_prefix}dlltool; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2031: checking for $ac_word" >&5 +echo "configure:2300: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2059,7 +2328,7 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "dlltool", so it can be a program name with args. set dummy dlltool; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2063: checking for $ac_word" >&5 +echo "configure:2332: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2094,7 +2363,7 @@ fi # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args. set dummy ${ac_tool_prefix}as; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2098: checking for $ac_word" >&5 +echo "configure:2367: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2126,7 +2395,7 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "as", so it can be a program name with args. set dummy as; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2130: checking for $ac_word" >&5 +echo "configure:2399: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2163,6 +2432,71 @@ fi esac +# enable the --disable-libtool-lock switch + +# Check whether --enable-libtool-lock or --disable-libtool-lock was given. +if test "${enable_libtool_lock+set}" = set; then + enableval="$enable_libtool_lock" + need_locks=$enableval +else + need_locks=yes +fi + + +if test x"$need_locks" = xno; then + libtool_flags="$libtool_flags --disable-lock" +fi + + +# Save cache, so that ltconfig can load it +cat > confcache <<\EOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs. It is not useful on other systems. +# If it contains results you don't want to keep, you may remove or edit it. +# +# By default, configure uses ./config.cache as the cache file, +# creating it if it does not exist already. You can give configure +# the --cache-file=FILE option to use a different cache file; that is +# what configure does when it calls configure scripts in +# subdirectories, so they share the cache. +# Giving --cache-file=/dev/null disables caching, for debugging configure. +# config.status only pays attention to the cache file if you give it the +# --recheck option to rerun configure. +# +EOF +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, don't put newlines in cache variables' values. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +(set) 2>&1 | + case `(ac_space=' '; set | grep ac_space) 2>&1` in + *ac_space=\ *) + # `set' does not quote correctly, so add quotes (double-quote substitution + # turns \\\\ into \\, and sed turns \\ into \). + sed -n \ + -e "s/'/'\\\\''/g" \ + -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" + ;; + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' + ;; + esac >> confcache +if cmp -s $cache_file confcache; then + : +else + if test -w $cache_file; then + echo "updating cache $cache_file" + cat confcache > $cache_file + else + echo "not updating unwritable cache $cache_file" + fi +fi +rm -f confcache + + # Actually configure libtool. ac_aux_dir is where install-sh is found. CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \ LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \ @@ -2171,6 +2505,22 @@ ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \ $libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \ || { echo "configure: error: libtool configure failed" 1>&2; exit 1; } +# Reload cache, that may have been modified by ltconfig +if test -r "$cache_file"; then + echo "loading cache $cache_file" + . $cache_file +else + echo "creating cache $cache_file" + > $cache_file +fi + + +# This can be used to rebuild libtool when needed +LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh" + +# Always use our own libtool. +LIBTOOL='$(SHELL) $(top_builddir)/libtool' + # Redirect the config.log output again, so that the ltconfig log is not # clobbered by the next message. exec 5>>./config.log @@ -2190,7 +2540,7 @@ fi echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6 -echo "configure:2194: checking whether to enable maintainer-specific portions of Makefiles" >&5 +echo "configure:2544: checking whether to enable maintainer-specific portions of Makefiles" >&5 # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. if test "${enable_maintainer_mode+set}" = set; then enableval="$enable_maintainer_mode" @@ -2219,7 +2569,7 @@ if test "x" = "y"; then echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 -echo "configure:2223: checking for executable suffix" >&5 +echo "configure:2573: checking for executable suffix" >&5 if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2229,7 +2579,7 @@ else rm -f conftest* echo 'int main () { return 0; }' > conftest.$ac_ext ac_cv_exeext= - if { (eval echo configure:2233: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then + if { (eval echo configure:2583: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then for file in conftest.*; do case $file in *.c | *.o | *.obj | *.ilk | *.pdb) ;; @@ -2252,7 +2602,7 @@ ac_exeext=$EXEEXT fi echo $ac_n "checking for threads package to use""... $ac_c" 1>&6 -echo "configure:2256: checking for threads package to use" >&5 +echo "configure:2606: checking for threads package to use" >&5 # Check whether --enable-threads or --disable-threads was given. if test "${enable_threads+set}" = set; then enableval="$enable_threads" @@ -2388,7 +2738,7 @@ esac machdep= case "$host" in - alpha-*-*) + alpha*-*-*) machdep="alpha_mach_dep.lo" ;; mips-*-*) @@ -2667,9 +3017,10 @@ s%@EXEEXT@%$EXEEXT%g s%@BOEHM_GC_CFLAGS@%$BOEHM_GC_CFLAGS%g s%@LD@%$LD%g s%@NM@%$NM%g +s%@USE_SYMBOL_UNDERSCORE@%$USE_SYMBOL_UNDERSCORE%g s%@LN_S@%$LN_S%g -s%@LIBTOOL@%$LIBTOOL%g s%@DLLTOOL@%$DLLTOOL%g +s%@LIBTOOL@%$LIBTOOL%g s%@target_all@%$target_all%g s%@INCLUDES@%$INCLUDES%g s%@CXXINCLUDES@%$CXXINCLUDES%g diff --git a/boehm-gc/configure.in b/boehm-gc/configure.in index 0332b3d..f94c437 100644 --- a/boehm-gc/configure.in +++ b/boehm-gc/configure.in @@ -134,7 +134,7 @@ AC_SUBST(CXXINCLUDES) machdep= case "$host" in - alpha-*-*) + alpha*-*-*) machdep="alpha_mach_dep.lo" ;; mips-*-*) |