path: root/config/gdb-comm.exp

# Copyright (C) 1992-2016 Free Software Foundation, Inc.
#
# This file is part of DejaGnu.
#
# DejaGnu is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# DejaGnu is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with DejaGnu; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA.

# Note: some of this was cribbed from the gdb testsuite since we need
# to use some pretty standard gdb features (breakpoints in particular).

# Load up some standard junk.
load_lib remote.exp

if {![info exists board]} {
    perror "$board must be set before loading gdb-comm"
}

# The number of times we've tried to download/execute this executable.
set try_again 0

#
# Delete all breakpoints and verify that they were deleted.  If anything
# goes wrong, return -1.
#
proc gdb_comm_delete_breakpoints {} {
    global gdb_prompt

    remote_send host "delete breakpoints\n"
    remote_expect host 10 {
	-re "Delete all breakpoints.*y or n. $" {
	    remote_send host "y\n"
	    exp_continue
	}
	-re ".*$gdb_prompt $" { }
	timeout { perror "Delete all breakpoints (timeout)" ; return -1}
    }
    remote_send host "info breakpoints\n"
    remote_expect host 10 {
	-re "No breakpoints or watchpoints..*$gdb_prompt $" {}
	-re ".*$gdb_prompt $" { perror "breakpoints not deleted" ; return -1}
	timeout { perror "info breakpoints (timeout)" ; return -1}
    }
    return 0
}

#
# Inform the debugger that we have a new exec file.
# return a -1 if anything goes wrong, 0 on success.
#
proc gdb_comm_file_cmd { arg } {
    global verbose
    global loadpath
    global loadfile
    global GDB
    global gdb_prompt
    upvar timeout timeout

    # The "file" command loads up a new symbol file for gdb, deal with
    # the various messages it might spew out.
    if {[isremote host]} {
	set arg [remote_download host $arg a.out]
    }
    remote_send host "file $arg\n"
    remote_expect host 60 {
	-re "Reading symbols from.*done.*$gdb_prompt $" {
	    verbose "\t\tLoaded $arg into the $GDB"
	    return 0
	}
	-re "has no symbol-table.*$gdb_prompt $" {
	    perror "$arg wasn't compiled with \"-g\""
	    return -1
	}
	-re "A program is being debugged already.*Kill it.*y or n. $" {
	    remote_send host "y\n"
	    verbose "\t\tKilling previous program being debugged"
	    exp_continue
	}
	-re {Load new symbol table from ".*".*y or n.*$} {
	    remote_send host "y\n"
	    remote_expect host 60 {
		-re "Reading symbols from.*done.*$gdb_prompt $" {
		    verbose "\t\tLoaded $arg with new symbol table into $GDB"
		    return 0
		}
		timeout {
		    perror "(timeout) Couldn't load $arg, other program already loaded."
		    return -1
		}
	    }
	}
	-re ".*No such file or directory.*$gdb_prompt $" {
	    perror "($arg) No such file or directory\n"
	    return -1
	}
	-re "$gdb_prompt $" {
	    perror "couldn't load $arg into $GDB."
	    return -1
	}
	timeout {
	    perror "couldn't load $arg into $GDB (timed out)."
	    return -1
	}
	eof {
	    # This is an attempt to detect a core dump, but seems not to
	    # work.  Perhaps we need to match .* followed by eof, in which
	    # expect does not seem to have a way to do that.
	    perror "couldn't load $arg into $GDB (end of file)."
	    return -1
	}
    }
    return 0
}

# Disconnect from the target and forget that we have an executable. Returns
# -1 on failure, 0 on success.

proc gdb_comm_go_idle { } {
    global gdb_prompt

    if {![board_info host exists fileid]} {
	return -1
    }

    remote_send host "target exec\n"
    remote_expect host 10 {
	-re "Kill it.*y or n.*$" {
	    remote_send host "y\n"
	    exp_continue
	}
	-re "No exec.* file now.*$gdb_prompt $" {
	    return 0
	}
	default {
	    remote_close host
	    return -1
	}
    }
}

# Start GDB running with target DEST.
proc gdb_comm_start { dest } {
    global GDB
    global gdb_prompt
    global tool_root_dir

    # The variable gdb_prompt is a regexp which matches the gdb prompt.  Set it
    # if it is not already set.
    if {![board_info $dest exists gdb_prompt]} then {
	set gdb_prompt {\(gdb\)}
    } else {
	set gdb_prompt [board_info $dest gdb_prompt]
    }
    # Similarly for GDB.  Look in the object directory for gdb if we aren't
    # provided with one.
    if {![info exists GDB]} then {
	set GDB "[lookfor_file $tool_root_dir gdb/gdb]"
	if { $GDB eq "" } {
	    set GDB [transform gdb]
	}
    }
    if {[board_info host exists gdb_opts]} {
	set gdb_opts [board_info host gdb_opts]
    } else {
	set gdb_opts ""
    }
    # Start up gdb (no startfiles, no windows) and wait for a prompt.
    remote_spawn host "$GDB $gdb_opts -nw -nx"
    remote_expect host 60 {
	-re ".*$gdb_prompt $" { }
    }
    remote_send host "set height 0\n"
    remote_expect host 10 {
	-re ".*$gdb_prompt $" {}
    }
    remote_send host "set width 0\n"
    remote_expect host 10 {
	-re ".*$gdb_prompt $" {}
    }
}

# Add a breakpoint at function FUNCTION. We assume that GDB has already been
# started.
proc gdb_comm_add_breakpoint { function } {
    global gdb_prompt

    remote_send host "break $function\n"
    remote_expect host 60 {
	-re "Breakpoint.*$gdb_prompt $" { return "" }
	-re "Function.*not defined.*$gdb_prompt $" { return "undef" }
	-re "No symbol table.*$gdb_prompt $" { return "undef" }
	-re {.*Make breakpoint pending.*\? \(y or \[n\]\) $} {
	    remote_send host "y\n"
	    return "maybe"
	}
	default {
	    return "untested"
	}
    }
}

#
# quit_gdb -- try to quit GDB gracefully
#

proc quit_gdb { } {
    global gdb_prompt

    set spawn_id [board_info host fileid]

    if { $spawn_id ne "" && $spawn_id > -1 } {
	if { [remote_send host "quit\n"] eq "" } {
	    remote_expect host 10 {
		-re ".*y or n.*$" {
		    remote_send host "y\n"
		    exp_continue
		}
		-re {.*[*][*][*].*EXIT code} { }
		default { }
	    }
	}
    }
    if {![isremote host]} {
	remote_close host
    }
}

proc gdb_comm_leave { } {
    if {[isremote host]} {
	quit_gdb
    } else {
	gdb_comm_go_idle
    }
}
#
# gdb_comm_load -- load the program and execute it
#
# PROG is a full pathname to the file to load, no arguments.
# Result is "untested", "pass", "fail", etc.
#

proc gdb_comm_load { dest prog args } {
    global GDB
    global GDBFLAGS
    global gdb_prompt
    global timeout
    set argnames { "command-line arguments" "input file" "output file" }

    for { set x 0 } { $x < [llength $args] } { incr x } {
	if { [lindex $args $x] ne "" } {
	    return [list "unsupported" "no support for [lindex $argnames $x] on this target"]
	}
    }
    # Make sure the file we're supposed to load really exists.
    if {![file exists $prog]} then {
	perror "$prog does not exist."
	return [list "untested" ""]
    }

    if { [isremote host] || ![board_info host exists fileid] } {
	gdb_comm_start $dest
    }

    # Remove all breakpoints, then tell the debugger that we have
    # new exec file.
    if { [gdb_comm_delete_breakpoints] != 0 } {
	gdb_comm_leave
	return [gdb_comm_reload $dest $prog $args]
    }
    if { [gdb_comm_file_cmd $prog] != 0 } {
	gdb_comm_leave
	return [gdb_comm_reload $dest $prog $args]
    }
    if {[board_info $dest exists gdb_sect_offset]} {
	set textoff [board_info $dest gdb_sect_offset]
	remote_send host "sect .text $textoff\n"
	remote_expect host 10 {
	    -re {(0x[0-9a-z]+) - 0x[0-9a-z]+ is \.data} {
		set dataoff $expect_out(1,string)
		exp_continue
	    }
	    -re {(0x[0-9a-z]+) - 0x[0-9a-z]+ is \.bss} {
		set bssoff $expect_out(1,string)
		exp_continue
	    }
	    -re $gdb_prompt { }
	}
	set dataoff [format 0x%x [expr {$dataoff + $textoff}]]
	set bssoff [format 0x%x [expr {$bssoff + $textoff}]]
	remote_send host "sect .data $dataoff\n"
	remote_expect host 10 {
	    -re $gdb_prompt { }
	}
	remote_send host "sect .bss $bssoff\n"
	remote_expect host 10 {
	    -re $gdb_prompt { }
	}
    }

    set protocol [board_info $dest gdb_protocol]
    if {[board_info $dest exists gdb_serial]} {
	set targetname [board_info $dest gdb_serial]
    } elseif {[board_info $dest exists netport]} {
	set targetname [board_info $dest netport]
    } else {
	if {[board_info $dest exists serial]} {
	    set targetname [board_info $dest serial]
	} else {
	    set targetname ""
	}
    }
    if {[board_info $dest exists baud]} {
	remote_send host "set remotebaud [board_info $dest baud]\n"
	remote_expect host 10 {
	    -re ".*$gdb_prompt $" {}
	    default {
		warning "failed setting baud rate"
	    }
	}
    }
    remote_send host "target $protocol $targetname\n"
    remote_expect host 60 {
	-re "Couldn.t establish conn.*$gdb_prompt $" {
	    warning "Unable to connect to $targetname with GDB."
	    quit_gdb
	    return [gdb_comm_reload $dest $prog $args]
	}
	-re "Ending remote.*$gdb_prompt $" {
	    warning "Unable to connect to $targetname with GDB."
	    quit_gdb
	    return [gdb_comm_reload $dest $prog $args]
	}
	-re "Remote target $protocol connected to.*$gdb_prompt $" { }
	-re "Remote target $targetname connected to.*$gdb_prompt $" { }
	-re "Connected to ARM RDI target.*$gdb_prompt $" { }
	-re "Connected to the simulator.*$gdb_prompt $" { }
	-re "Remote.*using $targetname.*$gdb_prompt $" { }
	-re "$gdb_prompt $" {
	    warning "Unable to connect to $targetname with GDB."
	    quit_gdb
	    return [gdb_comm_reload $dest $prog $args]
	}
	-re ".*RDI_open.*should reset target.*" {
	    warning "RDI Open Failed"
	    quit_gdb
	    return [gdb_comm_reload $dest $prog $args]
	}
	default {
	    warning "Unable to connect to $targetname with GDB."
	    quit_gdb
	    return [gdb_comm_reload $dest $prog $args]
	}
    }

    if {[target_info exists gdb_init_command]} {
	remote_send host "[target_info gdb_init_command]\n"
	remote_expect host 10 {
	    -re ".*$gdb_prompt $" { }
	    default {
		gdb_comm_leave
		return [list "fail" ""]
	    }
	}
    }
    # Now download the executable to the target board.  If communications
    # with the target are very slow the timeout might need to be increased.
    if {[board_info $dest exists gdb_load_offset]} {
	remote_send host "load $prog [board_info $dest gdb_load_offset]\n"
    } else {
	remote_send host "load\n"
    }
    remote_expect host 600 {
	-re "text.*data.*$gdb_prompt $" { }
	-re "data.*text.*$gdb_prompt $" { }
	-re "$gdb_prompt $" {
	    warning "Unable to send program to target board."
	    gdb_comm_leave
	    return [gdb_comm_reload $dest $prog $args]
	}
	default {
	    warning "Unable to send program to target board."
	    gdb_comm_leave
	    return [gdb_comm_reload $dest $prog $args]
	}
    }

    # Now set up breakpoints in exit, _exit, and abort.  These
    # are used to determine if a c-torture test passed or failed.  More
    # work would be necessary for things like the g++ testsuite which
    # use printf to indicate pass/fail status.

    if { [gdb_comm_add_breakpoint _exit] ne "" } {
	gdb_comm_add_breakpoint exit
    }
    gdb_comm_add_breakpoint abort

    set output ""

    # Now start up the program and look for our magic breakpoints.
    # And a whole lot of other magic stuff too.

    if {[board_info $dest exists gdb_run_command]} {
	remote_send host "[board_info $dest gdb_run_command]\n"
    } else {
	remote_send host "run\n"
    }
    # FIXME: The value 300 below should be a parameter.
    if {[board_info $dest exists testcase_timeout]} {
	set testcase_timeout [board_info $dest testcase_timeout]
    } else {
	set testcase_timeout 300
    }
    remote_expect host $testcase_timeout {
	-re "Line.*Jump anyway.*.y or n.*" {
	    remote_send host "y\n"
	    exp_continue
	}
	-re {Continuing( at |\.| with no signal\.)[^\r\n]*[\r\n]} {
	    exp_continue
	}
	-re ".*Start it from the beginning?.*y or n.*" {
	    remote_send host "n\n"
	    remote_expect host 10 {
		-re ".*$gdb_prompt $" {
		    remote_send host "signal 0\n"
		    remote_expect host 10 {
			-re {signal 0[\r\n]+} { exp_continue }
			-re {Continuing(\.| with no signal\.)[\r\n]} {}
		    }
		}
	    }
	    exp_continue
	}
	-re {(run[\r\n]*|)Starting program: [^\r\n]*[\r\n]} {
	    exp_continue
	}
	-re "$gdb_prompt (signal 0|continue)\[\r\n\]+Continuing(\\.| with no signal\\.)\[\r\n\]" {
	    exp_continue
	}
	-re "(.*)Breakpoint.*exit.*=0.*$gdb_prompt $" {
	    append output $expect_out(1,string)
	    set result [check_for_board_status output]
	    gdb_comm_leave
	    if { $result > 0 } {
		return [list "fail" $output]
	    }
	    return [list "pass" $output]
	}
	-re "(.*)Breakpoint.*exit.*=\[1-9\]\[0-9\]*.*$gdb_prompt $" {
	    append output $expect_out(1,string)
	    set result [check_for_board_status output]
	    gdb_comm_leave
	    if { $result == 0 } {
		return [list "pass" $output]
	    }
	    if {[board_info $dest exists exit_statuses_bad]} {
		return [list "pass" $output]
	    }
	    return [list "fail" $output]
	}
	-re "(.*)Breakpoint.*exit.*$gdb_prompt $" {
	    append output $expect_out(1,string)
	    set status [check_for_board_status output]
	    gdb_comm_leave
	    if { $status > 0 } {
		return [list "fail" $output]
	    }
	    return [list "pass" $output]
	}
	-re "(.*)Breakpoint.*abort.*$gdb_prompt $" {
	    append output $expect_out(1,string)
	    check_for_board_status output
	    gdb_comm_leave
	    return [list "fail" $output]
	}
	-re "SIGTRAP.*$gdb_prompt $" {
	    return [gdb_comm_reload $dest $prog $args]
	}
	-re "(.*)Program (received |terminated ).*$gdb_prompt $" {
	    set output $expect_out(1,string)
	    check_for_board_status output
	    gdb_comm_leave
	    remote_reboot $dest
	    return [list "fail" $output]
	}
	-re "(.*)Program exited with code \[0-9\]+.*$gdb_prompt $" {
	    set output $expect_out(1,string)
	    set status [check_for_board_status output]
	    gdb_comm_leave
	    if { $status > 0 } {
		return [list "fail" $output]
	    }
	    return [list "pass" $output]
	}
	default {
	    gdb_comm_leave
	    if {[board_info $dest exists unreliable]} {
		if { [board_info $dest unreliable] > 0 } {
		    global board_info
		    set name [board_info $dest name]
		    incr board_info($name,unreliable) -1
		    set result [gdb_comm_reload $dest $prog $args]
		    incr board_info($name,unreliable)
		    return $result
		}
	    }
	    return [list "fail" ""]
	}
    }
    gdb_comm_leave
    return [list "fail" ""]
}

# If we've tried less than 4 times to load PROG, reboot the target, restart GDB
# and try again. Otherwise, return "untested".
proc gdb_comm_reload { dest prog aargs } {
    global try_again

    # how many times have we done this?
    set n_reloads [board_info $dest n_reloads]
    if {$n_reloads eq ""} {
	set n_reloads 0
    }

    # increment it
    global board_info
    set name [board_info $dest name]
    set board_info($dest,n_reloads) [expr {$n_reloads + 1}]

    # how many times are we allowed to do this?
    set max [board_info $dest max_reload_reboots]
    if {$max eq ""} {
	set max 15
    }

    # if we've been doing this too much, something's very
    # wrong.  just give up, to reduce stress on boards.
    if {$max == $n_reloads} {
	perror "Too many reboots.  Giving up."
    }
    if {$max <= $n_reloads} {
	return {untested {}}
    }

    if { $try_again < 4 } {
	global GDB
	remote_reboot $dest
	remote_close host
	incr try_again
	set result [eval remote_load \"$dest\" \"$prog\" $aargs]
	set try_again 0
	return $result
    } else {
	set try_again 0
	return [list "untested" ""]
    }
}

set_board_info protocol  "gdb_comm"