diff options
Diffstat (limited to 'example/calc/Makefile.in')
| -rw-r--r-- | example/calc/Makefile.in | 202 |
1 files changed, 137 insertions, 65 deletions
diff --git a/example/calc/Makefile.in b/example/calc/Makefile.in index ffbf775..dbf7d50 100644 --- a/example/calc/Makefile.in +++ b/example/calc/Makefile.in @@ -1,9 +1,8 @@ -# Makefile.in generated by automake 1.11.1 from Makefile.am. +# Makefile.in generated by automake 1.12.6 from Makefile.am. # @configure_input@ -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, -# Inc. +# Copyright (C) 1994-2012 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -32,6 +31,23 @@ # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. # VPATH = @srcdir@ +am__make_dryrun = \ + { \ + am__dry=no; \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ + | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ + *) \ + for am__flg in $$MAKEFLAGS; do \ + case $$am__flg in \ + *=*|--*) ;; \ + *n*) am__dry=yes; break;; \ + esac; \ + done;; \ + esac; \ + test $$am__dry = yes; \ + } pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ @@ -50,13 +66,13 @@ PRE_UNINSTALL = : POST_UNINSTALL = : check_PROGRAMS = calc$(EXEEXT) subdir = . -DIST_COMMON = README $(am__configure_deps) $(srcdir)/../../depcomp \ - $(srcdir)/../../install-sh $(srcdir)/../../missing \ - $(srcdir)/../../mkinstalldirs $(srcdir)/Makefile.am \ +DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ $(srcdir)/Makefile.in $(srcdir)/calc.h.in \ + $(top_srcdir)/../../depcomp $(top_srcdir)/../../install-sh \ + $(top_srcdir)/../../missing $(top_srcdir)/../../mkinstalldirs \ $(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/configure.in +am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ @@ -78,8 +94,15 @@ CCLD = $(CC) LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ SOURCES = $(calc_SOURCES) DIST_SOURCES = $(calc_SOURCES) +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac ETAGS = etags CTAGS = ctags +CSCOPE = cscope +AM_RECURSIVE_TARGETS = cscope DEJATOOL = $(PACKAGE) EXPECT = expect RUNTEST = runtest @@ -87,12 +110,18 @@ DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) am__remove_distdir = \ - { test ! -d "$(distdir)" \ - || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ - && rm -fr "$(distdir)"; }; } + if test -d "$(distdir)"; then \ + find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ + && rm -rf "$(distdir)" \ + || { sleep 5 && rm -rf "$(distdir)"; }; \ + else :; fi +am__post_remove_distdir = $(am__remove_distdir) DIST_ARCHIVES = $(distdir).tar.gz GZIP_ENV = --best +DIST_TARGETS = dist-gzip distuninstallcheck_listfiles = find . -type f -print +am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ + | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' distcleancheck_listfiles = find . -type f -print ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ @@ -190,7 +219,7 @@ all: calc.h .SUFFIXES: .SUFFIXES: .c .o .obj -am--refresh: +am--refresh: Makefile @: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ @@ -226,10 +255,8 @@ $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) $(am__aclocal_m4_deps): calc.h: stamp-h1 - @if test ! -f $@; then \ - rm -f stamp-h1; \ - $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \ - else :; fi + @if test ! -f $@; then rm -f stamp-h1; else :; fi + @if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi stamp-h1: $(srcdir)/calc.h.in $(top_builddir)/config.status @rm -f stamp-h1 @@ -244,7 +271,7 @@ distclean-hdr: clean-checkPROGRAMS: -test -z "$(check_PROGRAMS)" || rm -f $(check_PROGRAMS) -calc$(EXEEXT): $(calc_OBJECTS) $(calc_DEPENDENCIES) +calc$(EXEEXT): $(calc_OBJECTS) $(calc_DEPENDENCIES) $(EXTRA_calc_DEPENDENCIES) @rm -f calc$(EXEEXT) $(LINK) $(calc_OBJECTS) $(calc_LDADD) $(LIBS) @@ -319,11 +346,35 @@ GTAGS: && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" +cscope: cscope.files + test ! -s cscope.files \ + || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) + +clean-cscope: + -rm -f cscope.files + +cscope.files: clean-cscope cscopelist + +cscopelist: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS) $(LISP)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files + distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + -rm -f cscope.out cscope.in.out cscope.po.out cscope.files check-DEJAGNU: site.exp - srcdir=`$(am__cd) $(srcdir) && pwd`; export srcdir; \ + srcdir='$(srcdir)'; export srcdir; \ EXPECT=$(EXPECT); export EXPECT; \ runtest=$(RUNTEST); \ if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \ @@ -331,19 +382,26 @@ check-DEJAGNU: site.exp if $$runtest $(AM_RUNTESTFLAGS) $(RUNTESTDEFAULTFLAGS) $(RUNTESTFLAGS); \ then :; else exit_status=1; fi; \ done; \ - else echo "WARNING: could not find \`runtest'" 1>&2; :;\ + else echo "WARNING: could not find 'runtest'" 1>&2; :;\ fi; \ exit $$exit_status -site.exp: Makefile - @echo 'Making a new site.exp file...' +site.exp: Makefile $(EXTRA_DEJAGNU_SITE_CONFIG) + @echo 'Making a new site.exp file ...' @echo '## these variables are automatically generated by make ##' >site.tmp @echo '# Do not edit here. If you wish to override these values' >>site.tmp @echo '# edit the last section' >>site.tmp - @echo 'set srcdir $(srcdir)' >>site.tmp + @echo 'set srcdir "$(srcdir)"' >>site.tmp @echo "set objdir `pwd`" >>site.tmp - @echo '## All variables above are generated by configure. Do Not Edit ##' >>site.tmp - @test ! -f site.exp || \ - sed '1,/^## All variables above are.*##/ d' site.exp >> site.tmp + @list='$(EXTRA_DEJAGNU_SITE_CONFIG)'; for f in $$list; do \ + echo "## Begin content included from file $$f. Do not modify. ##" \ + && cat `test -f "$$f" || echo '$(srcdir)/'`$$f \ + && echo "## End content included from file $$f. ##" \ + || exit 1; \ + done >> site.tmp + @echo "## End of auto-generated content; you can edit from here. ##" >> site.tmp + @if test -f site.exp; then \ + sed -e '1,/^## End of auto-generated content.*##/d' site.exp >> site.tmp; \ + fi @-rm -f site.bak @test ! -f site.exp || mv site.exp site.bak @mv site.tmp site.exp @@ -395,36 +453,36 @@ distdir: $(DISTFILES) || chmod -R a+r "$(distdir)" dist-gzip: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz - $(am__remove_distdir) + $(am__post_remove_distdir) dist-bzip2: distdir - tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 - $(am__remove_distdir) + tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 + $(am__post_remove_distdir) -dist-lzma: distdir - tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma - $(am__remove_distdir) +dist-lzip: distdir + tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz + $(am__post_remove_distdir) dist-xz: distdir - tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz - $(am__remove_distdir) + tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz + $(am__post_remove_distdir) dist-tarZ: distdir tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z - $(am__remove_distdir) + $(am__post_remove_distdir) dist-shar: distdir shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz - $(am__remove_distdir) + $(am__post_remove_distdir) dist-zip: distdir -rm -f $(distdir).zip zip -rq $(distdir).zip $(distdir) - $(am__remove_distdir) + $(am__post_remove_distdir) -dist dist-all: distdir - tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz - $(am__remove_distdir) +dist dist-all: + $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' + $(am__post_remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another @@ -435,8 +493,8 @@ distcheck: dist GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ - *.tar.lzma*) \ - lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\ + *.tar.lz*) \ + lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ *.tar.xz*) \ xz -dc $(distdir).tar.xz | $(am__untar) ;;\ *.tar.Z*) \ @@ -446,9 +504,9 @@ distcheck: dist *.zip*) \ unzip $(distdir).zip ;;\ esac - chmod -R a-w $(distdir); chmod a+w $(distdir) - mkdir $(distdir)/_build - mkdir $(distdir)/_inst + chmod -R a-w $(distdir) + chmod u+w $(distdir) + mkdir $(distdir)/_build $(distdir)/_inst chmod a-w $(distdir) test -d $(distdir)/_build || exit 0; \ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ @@ -456,6 +514,7 @@ distcheck: dist && am__cwd=`pwd` \ && $(am__cd) $(distdir)/_build \ && ../configure --srcdir=.. --prefix="$$dc_install_base" \ + $(AM_DISTCHECK_CONFIGURE_FLAGS) \ $(DISTCHECK_CONFIGURE_FLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ @@ -479,13 +538,21 @@ distcheck: dist && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ && cd "$$am__cwd" \ || exit 1 - $(am__remove_distdir) + $(am__post_remove_distdir) @(echo "$(distdir) archives ready for distribution: "; \ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' distuninstallcheck: - @$(am__cd) '$(distuninstallcheck_dir)' \ - && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ + @test -n '$(distuninstallcheck_dir)' || { \ + echo 'ERROR: trying to run $@ with an empty' \ + '$$(distuninstallcheck_dir)' >&2; \ + exit 1; \ + }; \ + $(am__cd) '$(distuninstallcheck_dir)' || { \ + echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ + exit 1; \ + }; \ + test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left after uninstall:" ; \ if test -n "$(DESTDIR)"; then \ echo " (check DESTDIR support)"; \ @@ -517,10 +584,15 @@ install-am: all-am installcheck: installcheck-am install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi mostlyclean-generic: clean-generic: @@ -607,20 +679,20 @@ uninstall-am: .MAKE: all check-am install-am install-strip .PHONY: CTAGS GTAGS all all-am am--refresh check check-DEJAGNU \ - check-am clean clean-checkPROGRAMS clean-generic ctags dist \ - dist-all dist-bzip2 dist-gzip dist-lzma dist-shar dist-tarZ \ - dist-xz dist-zip distcheck distclean distclean-DEJAGNU \ - distclean-compile distclean-generic distclean-hdr \ - distclean-tags distcleancheck distdir distuninstallcheck dvi \ - dvi-am html html-am info info-am install install-am \ - install-data install-data-am install-dvi install-dvi-am \ - install-exec install-exec-am install-html install-html-am \ - install-info install-info-am install-man install-pdf \ - install-pdf-am install-ps install-ps-am install-strip \ - installcheck installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-compile \ - mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \ - uninstall-am + check-am clean clean-checkPROGRAMS clean-cscope clean-generic \ + cscope cscopelist ctags dist dist-all dist-bzip2 dist-gzip \ + dist-lzip dist-shar dist-tarZ dist-xz dist-zip distcheck \ + distclean distclean-DEJAGNU distclean-compile \ + distclean-generic distclean-hdr distclean-tags distcleancheck \ + distdir distuninstallcheck dvi dvi-am html html-am info \ + info-am install install-am install-data install-data-am \ + install-dvi install-dvi-am install-exec install-exec-am \ + install-html install-html-am install-info install-info-am \ + install-man install-pdf install-pdf-am install-ps \ + install-ps-am install-strip installcheck installcheck-am \ + installdirs maintainer-clean maintainer-clean-generic \ + mostlyclean mostlyclean-compile mostlyclean-generic pdf pdf-am \ + ps ps-am tags uninstall uninstall-am # Tell versions [3.59,3.63) of GNU make to not export all variables. |