path: root/gdb/ChangeLog

2015-08-28  Simon Marchi  <simon.marchi@ericsson.com>

	* NEWS: Update entry about non-8-bits addressable memory.

2015-08-28  Ulrich Weigand  <uweigand@de.ibm.com>

	Revert:
	2014-11-06  Doug Evans  <xdje42@gmail.com>
	* solib.c (solib_global_lookup): Fetch arch from objfile,
	not target_gdbarch.

2015-08-27  Ulrich Weigand  <uweigand@de.ibm.com>

	* ppc-linux-tdep.c (ppc_linux_spe_context_lookup): Do not
	attempt to relocate a TLS variable offset.

2015-08-27  Ulrich Weigand  <uweigand@de.ibm.com>

	* spu-multiarch.c (parse_spufs_run): Bail out if inferior is not
	registered yet.  Set inferior_ptid while calling target_read_memory.

2015-08-27  Ulrich Weigand  <uweigand@de.ibm.com>

	* nat/linux-ptrace.h (GDB_ARCH_TRAP_BRKPT): Replace by ...
	(GDB_ARCH_IS_TRAP_BRKPT): ... this.  Add __powerpc__ case.
	* linux-nat.c (check_stopped_by_breakpoint): Use
	GDB_ARCH_IS_TRAP_BRKPT instead of GDB_ARCH_TRAP_BRKPT.

2015-08-27  Ulrich Weigand  <uweigand@de.ibm.com>

	* linux-thread-db.c (thread_db_get_thread_local_address): If the
	thread was not yet discovered, use thread_from_lwp instead of
	calling thread_db_find_new_threads_1.

2015-08-27  Simon Marchi  <simon.marchi@ericsson.com>

	* m88k-tdep.c (m88k_analyze_prologue): Fix inverted allocation
	statements.

2015-08-27  Simon Marchi  <simon.marchi@ericsson.com>

	* NEWS: Document support for non-8-bits addressable memory.

2015-08-27  Pedro Alves  <palves@redhat.com>

	* configure.ac: Remove AC_TYPE_SIGNAL call.
	* configure, config.in: Regenerate.

2015-08-27  Pedro Alves  <palves@redhat.com>

	* cp-support.c (gdb_demangle): Use sighandler_t.  Remove cast.
	* extension-priv.h: Include signal.h.
	(struct signal_handler) <handler>: Change type to sighandler_t.
	* extension.c (install_gdb_sigint_handler): Use sighandler_t.
	* inflow.c (sigint_ours, sigquit_ours): Change type to
	sighandler_t.
	(child_terminal_inferior): Remove casts.
	(child_terminal_ours_1, new_tty): Use sighandler_t.  Remove casts.
	(osig): Change type to sighandler_t.
	* nto-procfs.c (ofunc): Change type to sighandler_t.
	(procfs_wait): Remove casts.
	* remote-m32r-sdi.c (m32r_wait, m32r_load): Use sighandler_t.
	* remote-sim.c (gdbsim_wait): Use sighandler_t.
	* utils.c (wait_to_die_with_timeout): Use sighandler_t.

2015-08-27  Pedro Alves  <palves@redhat.com>

	* gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add signal-h.
	* gnulib/aclocal.m4: Renegerate.
	* gnulib/config.in: Renegerate.
	* gnulib/configure: Renegerate.
	* gnulib/import/Makefile.am: Update.
	* gnulib/import/Makefile.in: Regenerate.
	* gnulib/import/m4/gnulib-cache.m4: Update.
	* gnulib/import/m4/gnulib-comp.m4: Update.
	* gnulib/import/m4/signal_h.m4: New file.
	* gnulib/import/signal.in.h: New file.

2015-08-27  Pedro Alves  <palves@redhat.com>

	* remote.c (DEFAULT_MAX_MEMORY_PACKET_SIZE)
	(MIN_MEMORY_PACKET_SIZE): New.
	(MAX_REMOTE_PACKET_SIZE, MIN_REMOTE_PACKET_SIZE): Delete.
	(get_memory_packet_size): Adjust.  No longer limit the max packet
	size.
	(set_memory_packet_size): Adjust, and remove dead code.
	(remote_check_symbols): Use xmalloc and a cleanup instead of
	alloca.
	(remote_packet_size): No longer cap the packet size.
	(putpkt_binary): Use xmalloc and a cleanup instead of alloca.

2015-08-26  Luis Machado  <lgustavo@codesourcery.com>

	* compile/compile.c (compile_to_object): Mention language in
	error message.

2015-08-26  Patrick Palka  <patrick@parcs.ath.cx>

	* target.c (target_pre_inferior): Unset attach_flag.

2015-08-26  Simon Marchi  <simon.marchi@ericsson.com>

	* gdbarch.sh (append_name): Fix type in XRESIZEVEC.
	* gdbarch.c: Re-generate.

2015-08-26  Simon Marchi  <simon.marchi@ericsson.com>

	* aarch64-linux-nat.c (aarch64_add_process): Replace xmalloc-family
	function with the XNEW-family equivalent.
	* aarch64-tdep.c (aarch64_gdbarch_init): Likewise.
	* ada-exp.y (write_ambiguous_var): Likewise.
	* ada-lang.c (resolve_subexp): Likewise.
	(user_select_syms): Likewise.
	(assign_aggregate): Likewise.
	(ada_evaluate_subexp): Likewise.
	(cache_symbol): Likewise.
	* addrmap.c (allocate_key): Likewise.
	(addrmap_create_mutable): Likewise.
	* aix-thread.c (sync_threadlists): Likewise.
	* alpha-tdep.c (alpha_push_dummy_call): Likewise.
	(alpha_gdbarch_init): Likewise.
	* amd64-windows-tdep.c (amd64_windows_push_arguments): Likewise.
	* arm-linux-nat.c (arm_linux_add_process): Likewise.
	* arm-linux-tdep.c (arm_linux_displaced_step_copy_insn): Likewise.
	* arm-tdep.c (push_stack_item): Likewise.
	(arm_displaced_step_copy_insn): Likewise.
	(arm_gdbarch_init): Likewise.
	(_initialize_arm_tdep): Likewise.
	* avr-tdep.c (push_stack_item): Likewise.
	* ax-general.c (new_agent_expr): Likewise.
	* block.c (block_initialize_namespace): Likewise.
	* breakpoint.c (alloc_counted_command_line): Likewise.
	(update_dprintf_command_list): Likewise.
	(parse_breakpoint_sals): Likewise.
	(decode_static_tracepoint_spec): Likewise.
	(until_break_command): Likewise.
	(clear_command): Likewise.
	(update_global_location_list): Likewise.
	(get_breakpoint_objfile_data) Likewise.
	* btrace.c (ftrace_new_function): Likewise.
	(btrace_set_insn_history): Likewise.
	(btrace_set_call_history): Likewise.
	* buildsym.c (add_symbol_to_list): Likewise.
	(record_pending_block): Likewise.
	(start_subfile): Likewise.
	(start_buildsym_compunit): Likewise.
	(push_subfile): Likewise.
	(end_symtab_get_static_block): Likewise.
	(buildsym_init): Likewise.
	* cli/cli-cmds.c (source_command): Likewise.
	* cli/cli-decode.c (add_cmd): Likewise.
	* cli/cli-script.c (build_command_line): Likewise.
	(setup_user_args): Likewise.
	(realloc_body_list): Likewise.
	(process_next_line): Likewise.
	(copy_command_lines): Likewise.
	* cli/cli-setshow.c (do_set_command): Likewise.
	* coff-pe-read.c (read_pe_exported_syms): Likewise.
	* coffread.c (coff_locate_sections): Likewise.
	(coff_symtab_read): Likewise.
	(coff_read_struct_type): Likewise.
	* common/cleanups.c (make_my_cleanup2): Likewise.
	* common/common-exceptions.c (throw_it): Likewise.
	* common/filestuff.c (make_cleanup_close): Likewise.
	* common/format.c (parse_format_string): Likewise.
	* common/queue.h (DEFINE_QUEUE_P): Likewise.
	* compile/compile-object-load.c (munmap_list_add): Likewise.
	(compile_object_load): Likewise.
	* compile/compile-object-run.c (compile_object_run): Likewise.
	* compile/compile.c (append_args): Likewise.
	* corefile.c (specify_exec_file_hook): Likewise.
	* cp-support.c (make_symbol_overload_list): Likewise.
	* cris-tdep.c (push_stack_item): Likewise.
	(cris_gdbarch_init): Likewise.
	* ctf.c (ctf_trace_file_writer_new): Likewise.
	* dbxread.c (init_header_files): Likewise.
	(add_new_header_file): Likewise.
	(init_bincl_list): Likewise.
	(dbx_end_psymtab): Likewise.
	(start_psymtab): Likewise.
	(dbx_end_psymtab): Likewise.
	* dcache.c (dcache_init): Likewise.
	* dictionary.c (dict_create_hashed): Likewise.
	(dict_create_hashed_expandable): Likewise.
	(dict_create_linear): Likewise.
	(dict_create_linear_expandable): Likewise.
	* dtrace-probe.c (dtrace_process_dof_probe): Likewise.
	* dummy-frame.c (register_dummy_frame_dtor): Likewise.
	* dwarf2-frame-tailcall.c (cache_new_ref1): Likewise.
	* dwarf2-frame.c (dwarf2_build_frame_info): Likewise.
	(decode_frame_entry_1): Likewise.
	* dwarf2expr.c (new_dwarf_expr_context): Likewise.
	* dwarf2loc.c (dwarf2_compile_expr_to_ax): Likewise.
	* dwarf2read.c (dwarf2_has_info): Likewise.
	(create_signatured_type_table_from_index): Likewise.
	(dwarf2_read_index): Likewise.
	(dw2_get_file_names_reader): Likewise.
	(create_all_type_units): Likewise.
	(read_cutu_die_from_dwo): Likewise.
	(init_tu_and_read_dwo_dies): Likewise.
	(init_cutu_and_read_dies): Likewise.
	(create_all_comp_units): Likewise.
	(queue_comp_unit): Likewise.
	(inherit_abstract_dies): Likewise.
	(read_call_site_scope): Likewise.
	(dwarf2_add_field): Likewise.
	(dwarf2_add_typedef): Likewise.
	(dwarf2_add_member_fn): Likewise.
	(attr_to_dynamic_prop): Likewise.
	(abbrev_table_alloc_abbrev): Likewise.
	(abbrev_table_read_table): Likewise.
	(add_include_dir): Likewise.
	(add_file_name): Likewise.
	(dwarf_decode_line_header): Likewise.
	(dwarf2_const_value_attr): Likewise.
	(dwarf_alloc_block): Likewise.
	(parse_macro_definition): Likewise.
	(set_die_type): Likewise.
	(write_psymtabs_to_index): Likewise.
	(create_cus_from_index): Likewise.
	(dwarf2_create_include_psymtab): Likewise.
	(process_psymtab_comp_unit_reader): Likewise.
	(build_type_psymtab_dependencies): Likewise.
	(read_comp_units_from_section): Likewise.
	(compute_compunit_symtab_includes): Likewise.
	(create_dwo_unit_in_dwp_v1): Likewise.
	(create_dwo_unit_in_dwp_v2): Likewise.
	(read_func_scope): Likewise.
	(process_structure_scope): Likewise.
	(mark_common_block_symbol_computed): Likewise.
	(load_partial_dies): Likewise.
	(dwarf2_symbol_mark_computed): Likewise.
	* elfread.c (elf_symfile_segments): Likewise.
	(elf_read_minimal_symbols): Likewise.
	* environ.c (make_environ): Likewise.
	* eval.c (evaluate_subexp_standard): Likewise.
	* event-loop.c (create_file_handler): Likewise.
	(create_async_signal_handler): Likewise.
	(create_async_event_handler): Likewise.
	(create_timer): Likewise.
	* exec.c (build_section_table): Likewise.
	* fbsd-nat.c (fbsd_remember_child): Likewise.
	* fork-child.c (fork_inferior): Likewise.
	* frv-tdep.c (new_variant): Likewise.
	* gdbarch.sh (gdbarch_alloc): Likewise.
	(append_name): Likewise.
	* gdbtypes.c (rank_function): Likewise.
	(copy_type_recursive): Likewise.
	(add_dyn_prop): Likewise.
	* gnu-nat.c (make_proc): Likewise.
	(make_inf): Likewise.
	(gnu_write_inferior): Likewise.
	* gnu-v3-abi.c (build_gdb_vtable_type): Likewise.
	(build_std_type_info_type): Likewise.
	* guile/scm-param.c (compute_enum_list): Likewise.
	* guile/scm-utils.c (gdbscm_parse_function_args): Likewise.
	* guile/scm-value.c (gdbscm_value_call): Likewise.
	* h8300-tdep.c (h8300_gdbarch_init): Likewise.
	* hppa-tdep.c (hppa_init_objfile_priv_data): Likewise.
	(read_unwind_info): Likewise.
	* ia64-tdep.c (ia64_gdbarch_init): Likewise.
	* infcall.c (dummy_frame_context_saver_setup): Likewise.
	(call_function_by_hand_dummy): Likewise.
	* infcmd.c (step_once): Likewise.
	(finish_forward): Likewise.
	(attach_command): Likewise.
	(notice_new_inferior): Likewise.
	* inferior.c (add_inferior_silent): Likewise.
	* infrun.c (add_displaced_stepping_state): Likewise.
	(save_infcall_control_state): Likewise.
	(save_inferior_ptid): Likewise.
	(_initialize_infrun): Likewise.
	* jit.c (bfd_open_from_target_memory): Likewise.
	(jit_gdbarch_data_init): Likewise.
	* language.c (add_language): Likewise.
	* linespec.c (decode_line_2): Likewise.
	* linux-nat.c (add_to_pid_list): Likewise.
	(add_initial_lwp): Likewise.
	* linux-thread-db.c (add_thread_db_info): Likewise.
	(record_thread): Likewise.
	(info_auto_load_libthread_db): Likewise.
	* m32c-tdep.c (m32c_gdbarch_init): Likewise.
	* m68hc11-tdep.c (m68hc11_gdbarch_init): Likewise.
	* m68k-tdep.c (m68k_gdbarch_init): Likewise.
	* m88k-tdep.c (m88k_analyze_prologue): Likewise.
	* macrocmd.c (macro_define_command): Likewise.
	* macroexp.c (gather_arguments): Likewise.
	* macroscope.c (sal_macro_scope): Likewise.
	* macrotab.c (new_macro_table): Likewise.
	* mdebugread.c (push_parse_stack): Likewise.
	(parse_partial_symbols): Likewise.
	(parse_symbol): Likewise.
	(psymtab_to_symtab_1): Likewise.
	(new_block): Likewise.
	(new_psymtab): Likewise.
	(mdebug_build_psymtabs): Likewise.
	(add_pending): Likewise.
	(elfmdebug_build_psymtabs): Likewise.
	* mep-tdep.c (mep_gdbarch_init): Likewise.
	* mi/mi-main.c (mi_execute_command): Likewise.
	* mi/mi-parse.c (mi_parse_argv): Likewise.
	* minidebug.c (lzma_open): Likewise.
	* minsyms.c (terminate_minimal_symbol_table): Likewise.
	* mips-linux-nat.c (mips_linux_insert_watchpoint): Likewise.
	* mips-tdep.c (mips_gdbarch_init): Likewise.
	* mn10300-tdep.c (mn10300_gdbarch_init): Likewise.
	* msp430-tdep.c (msp430_gdbarch_init): Likewise.
	* mt-tdep.c (mt_registers_info): Likewise.
	* nat/aarch64-linux.c (aarch64_linux_new_thread): Likewise.
	* nat/linux-btrace.c (linux_enable_bts): Likewise.
	(linux_enable_pt): Likewise.
	* nat/linux-osdata.c (linux_xfer_osdata_processes): Likewise.
	(linux_xfer_osdata_processgroups): Likewise.
	* nios2-tdep.c (nios2_gdbarch_init): Likewise.
	* nto-procfs.c (procfs_meminfo): Likewise.
	* objc-lang.c (start_msglist): Likewise.
	(selectors_info): Likewise.
	(classes_info): Likewise.
	(find_methods): Likewise.
	* objfiles.c (allocate_objfile): Likewise.
	(update_section_map): Likewise.
	* osabi.c (gdbarch_register_osabi): Likewise.
	(gdbarch_register_osabi_sniffer): Likewise.
	* parse.c (start_arglist): Likewise.
	* ppc-linux-nat.c (hwdebug_find_thread_points_by_tid): Likewise.
	(hwdebug_insert_point): Likewise.
	* printcmd.c (display_command): Likewise.
	(ui_printf): Likewise.
	* procfs.c (create_procinfo): Likewise.
	(load_syscalls): Likewise.
	(proc_get_LDT_entry): Likewise.
	(proc_update_threads): Likewise.
	* prologue-value.c (make_pv_area): Likewise.
	(pv_area_store): Likewise.
	* psymtab.c (extend_psymbol_list): Likewise.
	(init_psymbol_list): Likewise.
	(allocate_psymtab): Likewise.
	* python/py-inferior.c (add_thread_object): Likewise.
	* python/py-param.c (compute_enum_values): Likewise.
	* python/py-value.c (valpy_call): Likewise.
	* python/py-varobj.c (py_varobj_iter_next): Likewise.
	* python/python.c (ensure_python_env): Likewise.
	* record-btrace.c (record_btrace_start_replaying): Likewise.
	* record-full.c (record_full_reg_alloc): Likewise.
	(record_full_mem_alloc): Likewise.
	(record_full_end_alloc): Likewise.
	(record_full_core_xfer_partial): Likewise.
	* regcache.c (get_thread_arch_aspace_regcache): Likewise.
	* remote-fileio.c (remote_fileio_init_fd_map): Likewise.
	* remote-notif.c (remote_notif_state_allocate): Likewise.
	* remote.c (demand_private_info): Likewise.
	(remote_notif_stop_alloc_reply): Likewise.
	(remote_enable_btrace): Likewise.
	* reverse.c (save_bookmark_command): Likewise.
	* rl78-tdep.c (rl78_gdbarch_init): Likewise.
	* rx-tdep.c (rx_gdbarch_init): Likewise.
	* s390-linux-nat.c (s390_insert_watchpoint): Likewise.
	* ser-go32.c (dos_get_tty_state): Likewise.
	(dos_copy_tty_state): Likewise.
	* ser-mingw.c (ser_windows_open): Likewise.
	(ser_console_wait_handle): Likewise.
	(ser_console_get_tty_state): Likewise.
	(make_pipe_state): Likewise.
	(net_windows_open): Likewise.
	* ser-unix.c (hardwire_get_tty_state): Likewise.
	(hardwire_copy_tty_state): Likewise.
	* solib-aix.c (solib_aix_new_lm_info): Likewise.
	* solib-dsbt.c (dsbt_current_sos): Likewise.
	(dsbt_relocate_main_executable): Likewise.
	* solib-frv.c (frv_current_sos): Likewise.
	(frv_relocate_main_executable): Likewise.
	* solib-spu.c (spu_bfd_fopen): Likewise.
	* solib-svr4.c (lm_info_read): Likewise.
	(svr4_copy_library_list): Likewise.
	(svr4_default_sos): Likewise.
	* source.c (find_source_lines): Likewise.
	(line_info): Likewise.
	(add_substitute_path_rule): Likewise.
	* spu-linux-nat.c (spu_bfd_open): Likewise.
	* spu-tdep.c (info_spu_dma_cmdlist): Likewise.
	* stabsread.c (dbx_lookup_type): Likewise.
	(read_type): Likewise.
	(read_member_functions): Likewise.
	(read_struct_fields): Likewise.
	(read_baseclasses): Likewise.
	(read_args): Likewise.
	(_initialize_stabsread): Likewise.
	* stack.c (func_command): Likewise.
	* stap-probe.c (handle_stap_probe): Likewise.
	* symfile.c (addrs_section_sort): Likewise.
	(addr_info_make_relative): Likewise.
	(load_section_callback): Likewise.
	(add_symbol_file_command): Likewise.
	(init_filename_language_table): Likewise.
	* symtab.c (create_filename_seen_cache): Likewise.
	(sort_search_symbols_remove_dups): Likewise.
	(search_symbols): Likewise.
	* target.c (make_cleanup_restore_target_terminal): Likewise.
	* thread.c (new_thread): Likewise.
	(enable_thread_stack_temporaries): Likewise.
	(make_cleanup_restore_current_thread): Likewise.
	(thread_apply_all_command): Likewise.
	* tic6x-tdep.c (tic6x_gdbarch_init): Likewise.
	* top.c (gdb_readline_wrapper): Likewise.
	* tracefile-tfile.c (tfile_trace_file_writer_new): Likewise.
	* tracepoint.c (trace_find_line_command): Likewise.
	(all_tracepoint_actions_and_cleanup): Likewise.
	(make_cleanup_restore_current_traceframe): Likewise.
	(get_uploaded_tp): Likewise.
	(get_uploaded_tsv): Likewise.
	* tui/tui-data.c (tui_alloc_generic_win_info): Likewise.
	(tui_alloc_win_info): Likewise.
	(tui_alloc_content): Likewise.
	(tui_add_content_elements): Likewise.
	* tui/tui-disasm.c (tui_find_disassembly_address): Likewise.
	(tui_set_disassem_content): Likewise.
	* ui-file.c (ui_file_new): Likewise.
	(stdio_file_new): Likewise.
	(tee_file_new): Likewise.
	* utils.c (make_cleanup_restore_integer): Likewise.
	(add_internal_problem_command): Likewise.
	* v850-tdep.c (v850_gdbarch_init): Likewise.
	* valops.c (find_oload_champ): Likewise.
	* value.c (allocate_value_lazy): Likewise.
	(record_latest_value): Likewise.
	(create_internalvar): Likewise.
	* varobj.c (install_variable): Likewise.
	(new_variable): Likewise.
	(new_root_variable): Likewise.
	(cppush): Likewise.
	(_initialize_varobj): Likewise.
	* windows-nat.c (windows_make_so): Likewise.
	* x86-nat.c (x86_add_process): Likewise.
	* xcoffread.c (arrange_linetable): Likewise.
	(allocate_include_entry): Likewise.
	(process_linenos): Likewise.
	(SYMBOL_DUP): Likewise.
	(xcoff_start_psymtab): Likewise.
	(xcoff_end_psymtab): Likewise.
	* xml-support.c (gdb_xml_parse_attr_ulongest): Likewise.
	* xtensa-tdep.c (xtensa_register_type): Likewise.
	* gdbarch.c: Regenerate.
	* gdbarch.h: Regenerate.

2015-08-25  Don Breazeal  <donb@codesourcery.com>

	* infrun.c (follow_exec): Re-order operations for
	handling follow-exec-mode "new".
	(handle_inferior_event_1): Assign ecs->event_thread
	to the current thread.
	* remote.c (get_remote_arch_state): Add an assertion.

2015-08-26  Pedro Alves  <palves@redhat.com>

	* MAINTAINERS: Add Markus Metzger as btrace maintainer.

2015-08-25  Pedro Alves  <palves@redhat.com>

	PR gdb/18804
	* defs.h (maybe_quit): Declare.
	(QUIT): Now calls maybe_quit.
	* event-loop.c (clear_async_signal_handler)
	(async_signal_handler_is_marked): New functions.
	* event-loop.h (async_signal_handler_is_marked)
	(clear_async_signal_handler): New declarations.
	* remote.c (remote_check_pending_interrupt): New function.
	(interrupt_query): Use make_cleanup_restore_target_terminal.  No
	longer check whether the target is async.  If waiting for a stop
	reply, and a Ctrl-C as been sent to the target, offer to
	disconnect, and throw TARGET_CLOSE_ERROR instead of a quit.
	Otherwise do not disconnect and throw a quit.
	(_initialize_remote): Install remote_check_pending_interrupt as
	to_check_pending_interrupt.
	* target.c (target_check_pending_interrupt): New function.
	* target.h (struct target_ops) <to_check_pending_interrupt>: New
	field.
	(target_check_pending_interrupt): New declaration.
	* utils.c (maybe_quit): New function.
	* target-delegates.c: Regenerate.

2015-08-25  Yao Qi  <yao.qi@linaro.org>

	* nat/aarch64-linux-hw-point.c (debug_reg_change_callback):
	Rename local variable pid to tid, and get lwpid of lwp.  Update
	debug output.

2015-08-25  Pierre-Marie de Rodat  <derodat@adacore.com>

	* ada-lang.c (ada_read_var_value): Add a var_block argument
	and pass it to default_read_var_value.
	* block.c (block_static_link): New accessor.
	* block.h (block_static_link): Declare it.
	* buildsym.c (finish_block_internal): Add a static_link
	argument.  If there is a static link, associate it to the new
	block.
	(finish_block): Add a static link argument and pass it to
	finish_block_internal.
	(end_symtab_get_static_block): Update calls to finish_block and
	to finish_block_internal.
	(end_symtab_with_blockvector): Update call to
	finish_block_internal.
	* buildsym.h: Forward-declare struct dynamic_prop.
	(struct context_stack): Add a static_link field.
	(finish_block): Add a static link argument.
	* c-exp.y: Remove an obsolete comment (evaluation of variables
	already start from the selected frame, and now they climb *up*
	the call stack) and propagate the block information to the
	produced expression.
	* d-exp.y: Likewise.
	* f-exp.y: Likewise.
	* go-exp.y: Likewise.
	* jv-exp.y: Likewise.
	* m2-exp.y: Likewise.
	* p-exp.y: Likewise.
	* coffread.c (coff_symtab_read): Update calls to finish_block.
	* dbxread.c (process_one_symbol): Likewise.
	* xcoffread.c (read_xcoff_symtab): Likewise.
	* compile/compile-c-symbols.c (convert_one_symbol): Promote the
	"sym" parameter to struct block_symbol, update its uses and pass
	its block to calls to read_var_value.
	(convert_symbol_sym): Update the calls to convert_one_symbol.
	* compile/compile-loc2c.c (do_compile_dwarf_expr_to_c): Update
	call to read_var_value.
	* dwarf2loc.c (block_op_get_frame_base): New.
	(dwarf2_block_frame_base_locexpr_funcs): Implement the
	get_frame_base method.
	(dwarf2_block_frame_base_loclist_funcs): Likewise.
	(dwarf2locexpr_baton_eval): Add a frame argument and use it
	instead of the selected frame in order to evaluate the
	expression.
	(dwarf2_evaluate_property): Add a frame argument.  Update call
	to dwarf2_locexpr_baton_eval to provide a frame in available and
	to handle the absence of address stack.
	* dwarf2loc.h (dwarf2_evaluate_property): Add a frame argument.
	* dwarf2read.c (attr_to_dynamic_prop): Add a forward
	declaration.
	(read_func_scope): Record any available static link description.
	Update call to finish_block.
	(read_lexical_block_scope): Update call to finish_block.
	* findvar.c (follow_static_link): New.
	(get_hosting_frame): New.
	(default_read_var_value): Add a var_block argument.  Use
	get_hosting_frame to handle non-local references.
	(read_var_value): Add a var_block argument and pass it to the
	LA_READ_VAR_VALUE method.
	* gdbtypes.c (resolve_dynamic_range): Update calls to
	dwarf2_evaluate_property.
	(resolve_dynamic_type_internal): Likewise.
	* guile/scm-frame.c (gdbscm_frame_read_var): Update call to
	read_var_value, passing it the block coming from symbol lookup.
	* guile/scm-symbol.c (gdbscm_symbol_value): Update call to
	read_var_value (TODO).
	* infcmd.c (finish_command_continuation): Update call to
	read_var_value, passing it the block coming from symbol lookup.
	* infrun.c (insert_exception_resume_breakpoint): Likewise.
	* language.h (struct language_defn): Add a var_block argument to
	the LA_READ_VAR_VALUE method.
	* objfiles.c (struct static_link_htab_entry): New.
	(static_link_htab_entry_hash): New.
	(static_link_htab_entry_eq): New.
	(objfile_register_static_link): New.
	(objfile_lookup_static_link): New.
	(free_objfile): Free the STATIC_LINKS hashed map if needed.
	* objfiles.h: Include hashtab.h.
	(struct objfile): Add a static_links field.
	(objfile_register_static_link): New.
	(objfile_lookup_static_link): New.
	* printcmd.c (print_variable_and_value): Update call to
	read_var_value.
	* python/py-finishbreakpoint.c (bpfinishpy_init): Likewise.
	* python/py-frame.c (frapy_read_var): Update call to
	read_var_value, passing it the block coming from symbol lookup.
	* python/py-framefilter.c (extract_sym): Add a sym_block
	parameter and set the pointed value to NULL (TODO).
	(enumerate_args): Update call to extract_sym.
	(enumerate_locals): Update calls to extract_sym and to
	read_var_value.
	* python/py-symbol.c (sympy_value): Update call to
	read_var_value (TODO).
	* stack.c (read_frame_local): Update call to read_var_value.
	(read_frame_arg): Likewise.
	(return_command): Likewise.
	* symtab.h (struct symbol_block_ops): Add a get_frame_base
	method.
	(struct symbol): Add a block field.
	(SYMBOL_BLOCK): New accessor.
	* valops.c (value_of_variable): Remove frame/block handling and
	pass the block argument to read_var_value, which does this job
	now.
	(value_struct_elt_for_reference): Update calls to
	read_var_value.
	(value_of_this): Pass the block found to read_var_value.
	* value.h (read_var_value): Add a var_block argument.
	(default_read_var_value): Likewise.

2015-08-25  Yao Qi  <yao.qi@linaro.org>

	* aarch64-linux-nat.c (aarch64_linux_new_thread): Move it to ...
	* nat/aarch64-linux.c (aarch64_linux_new_thread): ... here.
	* nat/aarch64-linux.h (aarch64_linux_new_thread): Declare.

2015-08-25  Yao Qi  <yao.qi@linaro.org>

	* Makefile.in (aarch64-liunx.o): New rule.
	(HFILES_NO_SRCDIR): Add aarch64-linux.h.
	* config/aarch64/linux.mh (NAT_FILE): Add aarch64-linux.o.
	* aarch64-linux-nat.c: Include nat/aarch64-linux.h.
	* aarch64-linux-nat.c (aarch64_get_debug_reg_state): Make it
	extern.
	(aarch64_linux_prepare_to_resume): Move it nat/aarch64-linux.c.
	* nat/aarch64-linux-hw-point.h (aarch64_debug_reg_state): Declare
	* nat/aarch64-linux.c: New file.
	* nat/aarch64-linux.h: New file.

2015-08-25  Yao Qi  <yao.qi@linaro.org>

	* aarch64-linux-nat.c (aarch64_linux_prepare_to_resume): Use
	lwp_arch_private_info and ptid_of_lwp.

2015-08-25  Yao Qi  <yao.qi@linaro.org>

	* aarch64-linux-nat.c (struct arch64_dr_update_callback_param):
	Move it to nat/aarch64-linux-hw-point.c.
	(debug_reg_change_callback): Likewise.
	(aarch64_notify_debug_reg_change): :Likewise.
	* nat/aarch64-linux-hw-point.c: Include nat/linux-nat.h.
	(aarch64_dr_update_callback_param): New.
	(debug_reg_change_callback): New function.
	(aarch64_notify_debug_reg_change): Likewise.
	* nat/aarch64-linux-hw-point.h (aarch64_notify_debug_reg_change):
	Remove the declaration.

2015-08-25  Yao Qi  <yao.qi@linaro.org>

	* aarch64-linux-nat.c (aarch64_notify_debug_reg_change):
	Call current_lwp_ptid.

2015-08-25  Yao Qi  <yao.qi@linaro.org>

	* aarch64-linux-nat.c (debug_reg_change_callback): Use
	debug_printf.

2015-08-25  Yao Qi  <yao.qi@linaro.org>

	* aarch64-linux-nat.c (debug_reg_change_callback): Call
	ptid_get_pid rather than ptid_get_lwp.

2015-08-24  Pedro Alves  <palves@redhat.com>

	* NEWS (New commands): Mention set/show remote
	multiprocess-extensions-packet.
	* remote.c (remote_query_supported): Only tell the server to use
	the multiprocess extensions if the user hasn't force-disabled them
	with "set remote multiprocess-extensions-packet off".

2015-08-24  Pedro Alves  <palves@redhat.com>

	* gnulib/update-gnulib.sh (GNULIB_COMMIT_SHA1): Set to
	1029a8112290f6eee9d7878a391c49db42c999bd.
	* gnulib/configure, gnulib/config.in, gnulib/aclocal.m4:
	Regenerate.
	* gnulib/import/Makefile.am: Update.
	* gnulib/import/Makefile.in: Update.
	* gnulib/import/alloca.in.h: Update.
	* gnulib/import/basename-lgpl.c: Update.
	* gnulib/import/canonicalize-lgpl.c: Update.
	* gnulib/import/config.charset: Update.
	* gnulib/import/dirent.in.h: Update.
	* gnulib/import/dirfd.c: Update.
	* gnulib/import/dirname-lgpl.c: Update.
	* gnulib/import/dirname.h: Update.
	* gnulib/import/dosname.h: Update.
	* gnulib/import/errno.in.h: Update.
	* gnulib/import/extra/snippet/arg-nonnull.h: Update.
	* gnulib/import/extra/snippet/c++defs.h: Update.
	* gnulib/import/extra/snippet/warn-on-use.h: Update.
	* gnulib/import/extra/update-copyright: Update.
	* gnulib/import/float+.h: Update.
	* gnulib/import/float.c: Update.
	* gnulib/import/float.in.h: Update.
	* gnulib/import/fnmatch.c: Update.
	* gnulib/import/fnmatch.in.h: Update.
	* gnulib/import/fnmatch_loop.c: Update.
	* gnulib/import/fpucw.h: Update.
	* gnulib/import/frexp.c: Update.
	* gnulib/import/frexpl.c: Update.
	* gnulib/import/gettimeofday.c: Update.
	* gnulib/import/inttypes.in.h: Update.
	* gnulib/import/isnan.c: Update.
	* gnulib/import/isnand-nolibm.h: Update.
	* gnulib/import/isnand.c: Update.
	* gnulib/import/isnanl-nolibm.h: Update.
	* gnulib/import/isnanl.c: Update.
	* gnulib/import/itold.c: Update.
	* gnulib/import/localcharset.c: Update.
	* gnulib/import/localcharset.h: Update.
	* gnulib/import/lstat.c: Update.
	* gnulib/import/m4/00gnulib.m4: Update.
	* gnulib/import/m4/absolute-header.m4: Update.
	* gnulib/import/m4/alloca.m4: Update.
	* gnulib/import/m4/canonicalize.m4: Update.
	* gnulib/import/m4/codeset.m4: Update.
	* gnulib/import/m4/configmake.m4: Update.
	* gnulib/import/m4/dirent_h.m4: Update.
	* gnulib/import/m4/dirfd.m4: Update.
	* gnulib/import/m4/dirname.m4: Update.
	* gnulib/import/m4/double-slash-root.m4: Update.
	* gnulib/import/m4/eealloc.m4: Update.
	* gnulib/import/m4/errno_h.m4: Update.
	* gnulib/import/m4/exponentd.m4: Update.
	* gnulib/import/m4/exponentl.m4: Update.
	* gnulib/import/m4/extensions.m4: Update.
	* gnulib/import/m4/extern-inline.m4: Update.
	* gnulib/import/m4/fcntl-o.m4: Update.
	* gnulib/import/m4/float_h.m4: Update.
	* gnulib/import/m4/fnmatch.m4: Update.
	* gnulib/import/m4/fpieee.m4: Update.
	* gnulib/import/m4/frexp.m4: Update.
	* gnulib/import/m4/frexpl.m4: Update.
	* gnulib/import/m4/gettimeofday.m4: Update.
	* gnulib/import/m4/glibc21.m4: Update.
	* gnulib/import/m4/gnulib-cache.m4: Update.
	* gnulib/import/m4/gnulib-common.m4: Update.
	* gnulib/import/m4/gnulib-comp.m4: Update.
	* gnulib/import/m4/gnulib-tool.m4: Update.
	* gnulib/import/m4/include_next.m4: Update.
	* gnulib/import/m4/inttypes-pri.m4: Update.
	* gnulib/import/m4/inttypes.m4: Update.
	* gnulib/import/m4/isnand.m4: Update.
	* gnulib/import/m4/isnanl.m4: Update.
	* gnulib/import/m4/largefile.m4: Update.
	* gnulib/import/m4/localcharset.m4: Update.
	* gnulib/import/m4/locale-fr.m4: Update.
	* gnulib/import/m4/locale-ja.m4: Update.
	* gnulib/import/m4/locale-zh.m4: Update.
	* gnulib/import/m4/longlong.m4: Update.
	* gnulib/import/m4/lstat.m4: Update.
	* gnulib/import/m4/malloc.m4: Update.
	* gnulib/import/m4/malloca.m4: Update.
	* gnulib/import/m4/math_h.m4: Update.
	* gnulib/import/m4/mbrtowc.m4: Update.
	* gnulib/import/m4/mbsinit.m4: Update.
	* gnulib/import/m4/mbsrtowcs.m4: Update.
	* gnulib/import/m4/mbstate_t.m4: Update.
	* gnulib/import/m4/memchr.m4: Update.
	* gnulib/import/m4/memmem.m4: Update.
	* gnulib/import/m4/mmap-anon.m4: Update.
	* gnulib/import/m4/multiarch.m4: Update.
	* gnulib/import/m4/nocrash.m4: Update.
	* gnulib/import/m4/off_t.m4: Update.
	* gnulib/import/m4/pathmax.m4: Update.
	* gnulib/import/m4/readlink.m4: Update.
	* gnulib/import/m4/rename.m4: Update.
	* gnulib/import/m4/rmdir.m4: Update.
	* gnulib/import/m4/ssize_t.m4: Update.
	* gnulib/import/m4/stat.m4: Update.
	* gnulib/import/m4/stdbool.m4: Update.
	* gnulib/import/m4/stddef_h.m4: Update.
	* gnulib/import/m4/stdint.m4: Update.
	* gnulib/import/m4/stdio_h.m4: Update.
	* gnulib/import/m4/stdlib_h.m4: Update.
	* gnulib/import/m4/string_h.m4: Update.
	* gnulib/import/m4/strstr.m4: Update.
	* gnulib/import/m4/strtok_r.m4: Update.
	* gnulib/import/m4/sys_socket_h.m4: Update.
	* gnulib/import/m4/sys_stat_h.m4: Update.
	* gnulib/import/m4/sys_time_h.m4: Update.
	* gnulib/import/m4/sys_types_h.m4: Update.
	* gnulib/import/m4/time_h.m4: Update.
	* gnulib/import/m4/unistd_h.m4: Update.
	* gnulib/import/m4/warn-on-use.m4: Update.
	* gnulib/import/m4/wchar_h.m4: Update.
	* gnulib/import/m4/wchar_t.m4: Update.
	* gnulib/import/m4/wctype_h.m4: Update.
	* gnulib/import/m4/wint_t.m4: Update.
	* gnulib/import/malloc.c: Update.
	* gnulib/import/malloca.c: Update.
	* gnulib/import/malloca.h: Update.
	* gnulib/import/math.in.h: Update.
	* gnulib/import/mbrtowc.c: Update.
	* gnulib/import/mbsinit.c: Update.
	* gnulib/import/mbsrtowcs-impl.h: Update.
	* gnulib/import/mbsrtowcs-state.c: Update.
	* gnulib/import/mbsrtowcs.c: Update.
	* gnulib/import/memchr.c: Update.
	* gnulib/import/memmem.c: Update.
	* gnulib/import/pathmax.h: Update.
	* gnulib/import/readlink.c: Update.
	* gnulib/import/ref-add.sin: Update.
	* gnulib/import/ref-del.sin: Update.
	* gnulib/import/rename.c: Update.
	* gnulib/import/rmdir.c: Update.
	* gnulib/import/same-inode.h: Update.
	* gnulib/import/stat.c: Update.
	* gnulib/import/stdbool.in.h: Update.
	* gnulib/import/stddef.in.h: Update.
	* gnulib/import/stdint.in.h: Update.
	* gnulib/import/stdio.c: Update.
	* gnulib/import/stdio.in.h: Update.
	* gnulib/import/stdlib.in.h: Update.
	* gnulib/import/str-two-way.h: Update.
	* gnulib/import/streq.h: Update.
	* gnulib/import/string.in.h: Update.
	* gnulib/import/stripslash.c: Update.
	* gnulib/import/strnlen1.c: Update.
	* gnulib/import/strnlen1.h: Update.
	* gnulib/import/strstr.c: Update.
	* gnulib/import/strtok_r.c: Update.
	* gnulib/import/sys_stat.in.h: Update.
	* gnulib/import/sys_time.in.h: Update.
	* gnulib/import/sys_types.in.h: Update.
	* gnulib/import/time.in.h: Update.
	* gnulib/import/unistd.in.h: Update.
	* gnulib/import/verify.h: Update.
	* gnulib/import/wchar.in.h: Update.
	* gnulib/import/wctype.in.h: Update.
	* gnulib/import/gettimeofday.c: New file.
	* gnulib/import/m4/absolute-header.m4: New file.
	* gnulib/import/m4/gettimeofday.m4: New file.
	* gnulib/import/m4/sys_socket_h.m4: New file.
	* gnulib/import/m4/sys_time_h.m4: New file.
	* gnulib/import/stdio.c: Delete file.
	* gnulib/import/sys_time.in.h: New file.

2015-08-24  Pedro Alves  <palves@redhat.com>

	* Makefile.in (HFILES_NO_SRCDIR): Add common/gdb_sys_time.h.
	* common/gdb_sys_time.h: New file.
	* event-loop.c: Include gdb_sys_time.h instead of sys/time.h.
	* gdb_select.h: Likewise.
	* gdb_usleep.c: Likewise.
	* maint.c: Likewise.
	* mi/mi-main.c: Likewise.
	* mi/mi-parse.h: Likewise.
	* remote-fileio.c: Likewise.
	* remote-m32r-sdi.c: Likewise.
	* remote.c: Likewise.
	* ser-base.c: Likewise.
	* ser-pipe.c: Likewise.
	* ser-tcp.c: Likewise.
	* ser-unix.c: Likewise.
	* symfile.c: Likewise.
	* symfile.c: Likewise.  Rename OSIZE to SIZE throughout.
	* target-memory.c: Include gdb_sys_time.h instead of sys/time.h.
	* utils.c: Likewise.

2015-08-24  Pedro Alves  <palves@redhat.com>

	* NEWS: Mention removed support for the various ROM monitors.
	* Makefile.in (ALL_TARGET_OBS): Remove dbug-rom.o, dink32-rom.o,
	ppcbug-rom.o, m32r-rom.o, dsrec.o and monitor.o from gdb_target_obs.
	* configure.tgt (h8300-*-*): Remove monitor.o and m32r-rom.o from
	gdb_target_obs.
	(m68*-*-*): Remove monitor.o dbug-rom.o and dsrec.o from
	gdb_target_obs.
	(microblaze*-linux-*): Remove microblaze-rom.o, monitor.o and
	dsrec.o from gdb_target_obs.
	(microblaze*-*-*): Remove microblaze-rom.o, monitor.o and dsrec.o
	from gdb_target_obs.
	(powerpc-*-lynx*178): Remove monitor.o and dsrec.o from
	gdb_target_obs.
	(powerpc*-*-*): Remove monitor.o, dsrec.o, ppcbug-rom.o and
	dink32-rom.o from gdb_target_obs.
	(sh*-*-linux*): Remove monitor.o and dsrec.o from gdb_target_obs.
	(sh*): Remove monitor.o and dsrec.o from gdb_target_obs.
	* dbug-rom.c, dink32-rom.c, dsrec.c, m32r-rom.c, microblaze-rom.c,
	monitor.c, monitor.h, ppcbug-rom.c, srec.h: Delete files.

2015-08-21  Pedro Alves  <palves@redhat.com>

	* frame.c (null_frame_id): Explicitly zero-initialize.

2015-08-21  Tom Tromey  <tromey@redhat.com>

	* dwarf2read.c (struct dwarf2_section_info): Rename field
	'asection' to 'section'.
	(dwarf2_has_info, get_section_bfd_owner, get_section_bfd_section)
	(dwarf2_locate_sections, dwarf2_locate_sections)
	(locate_dwz_sections, locate_v1_virtual_dwo_sections)
	(dwarf2_locate_dwo_sections, dwarf2_locate_dwo_sections)
	(dwarf2_locate_v2_dwp_sections): Adjust.

2015-08-21  Patrick Palka  <patrick@parcs.ath.cx>

	* top.h (gdb_in_secondary_prompt_p): Declare.
	* top.c (gdb_secondary_prompt_depth): Define.
	(gdb_in_secondary_prompt_p): Define.
	(gdb_readline_wrapper_cleanup): Decrement
	gdb_secondary_prompt_depth.
	(gdb_readline_wrapper): Increment gdb_secondary_prompt_depth.
	* tui/tui-io.c (tui_getc): Don't clear the prompt line if we
	are in a secondary prompt.

2015-08-21  Patrick Palka  <patrick@parcs.ath.cx>

	* tui/tui-io.c (tui_getc): Use tui_putc instead of waddch to
	emit the newline.

2015-08-21  Gary Benson  <gbenson@redhat.com>

	* gdb_bfd.c (gdb_bfd_iovec_fileio_pread): Add QUIT call.

2015-08-21  Gary Benson  <gbenson@redhat.com>

	* target.h (struct target_ops) <to_fileio_open>: New argument
	warn_if_slow.  Update comment.  All implementations updated.
	(target_fileio_open_warn_if_slow): New declaration.
	* target.c (target_fileio_open): Renamed as...
	(target_fileio_open_1): ...this.  New argument warn_if_slow.
	Pass warn_if_slow to implementation.  Update debug printing.
	(target_fileio_open): New function.
	(target_fileio_open_warn_if_slow): Likewise.
	* gdb_bfd.c (gdb_bfd_iovec_fileio_open): Use new function
	target_fileio_open_warn_if_slow.

2015-08-21  Gary Benson  <gbenson@redhat.com>

	* nat/linux-namespaces.c (linux_mntns_access_fs):
	Do not overwrite old_chain.

2015-08-20  Max Filippov  <jcmvbkbc@gmail.com>

	* arch/xtensa.h: New file.
	* xtensa-linux-nat.c (gdb_proc_service.h): New #include.
	(ps_get_thread_area): New function.
	* xtensa-linux-tdep.c (xtensa_linux_init_abi): Add call to
	set_gdbarch_fetch_tls_load_module_address to enable TLS support.
	* xtensa-tdep.c (osabi.h): New #include.
	(xtensa_gdbarch_init): Call gdbarch_init_osabi to register
	xtensa-specific hooks.
	* xtensa-tdep.h (struct xtensa_elf_gregset_t): Add threadptr
	member and move the structure to arch/xtensa.h.

2015-08-21  Pedro Alves  <palves@redhat.com>

	* remote.c (struct readahead_cache): New.
	(struct remote_state) <readahead_cache>: New field.
	(remote_open_1): Invalidate the cache.
	(readahead_cache_invalidate, readahead_cache_invalidate_fd): New
	functions.
	(remote_hostio_pwrite): Invalidate the readahead cache.
	(remote_hostio_pread): Rename to ...
	(remote_hostio_pread_vFile): ... this.
	(remote_hostio_pread_from_cache): New function.
	(remote_hostio_pread): Reimplement.
	(remote_hostio_close): Invalidate the readahead cache.

2015-08-21  Marcin Cieślak <saper@saper.info>  (tiny patch)

	PR build/18843
	* procfs.c: Include "filestuff.h".

2015-08-21  Patrick Palka  <patrick@parcs.ath.cx>

	* tui/tui-data.h (tui_command_info): Remove fields cur_line and
	curch.
	* tui/tui-data.c (tui_clear_win_detail) [CMD_WIN]: Don't set
	cur_line or curch, instead call wmove().
	(init_win_info) [CMD_WIN]: Likewise.
	* tui/tui-io.c (tui_puts): Likewise. Don't read cur_line,
	instead call getcury().
	(tui_redisplay_readline): Don't set cur_line or curch.
	(tui_mld_erase_entire_line): Don't read cur_line, instead call
	getcury().
	(tui_cont_sig): Remove call to wmove.
	(tui_getc): Don't read cur_line or curch, instead call getcury()
	or getyx().  Don't set curch.
	* tui/tui-win.c (make_visible_with_new_height) [CMD_WIN]: Don't
	set cur_line or curch.  Always move cursor to (0,0).

2015-08-20  Pedro Alves  <palves@redhat.com>

	* infrun.c (print_target_wait_results): Make extern.
	* infrun.h (print_target_wait_results): Declare.
	* remote.c (set_stop_requested_callback): Delete.
	(process_initial_stop_replies): New function.
	(remote_start_remote): Use it.
	(stop_reply_queue_length): New function.

2015-08-20  Pedro Alves  <palves@redhat.com>

	* dwarf2read.c (process_full_comp_unit): To tell whether
	start_subfile managed to deduce a language, test for
	language_unknown instead of language_c.

2015-08-20  Pierre-Marie de Rodat  <derodat@adacore.com>

	* ada-lex.l: Reset the start condition to INITIAL in the rule that
	matches attributes.

2015-08-19  Kevin Buettner  <kevinb@redhat.com>

	* dwarf2read.c (dwarf2_string_attr): New function.
	(lookup_dwo_unit, process_psymtab_comp_unit_reader)
	(dwarf2_compute_name, dwarf2_physname, find_file_and_directory)
	(read_call_site_scope, namespace_name, guess_full_die_structure_name)
	(anonymous_struct_prefix, prepare_one_comp_unit): Use
	dwarf2_string_attr in place of dwarf2_attr and DW_STRING.

2015-08-18  Doug Evans  <dje@google.com>
	    Adrian Sendroiu <adrian.sendroiu@freescale.com>

	PR mi/18833
	* cli/cli-logging.c (pop_output_files): Don't restore redirection
	if MI-like.
	* mi/mi-out.c: #include "vec.h".
	(ui_filep): New type.
	(DEV_VEC_P (ui_filep)): New type.
	(struct ui_out_data) <buffer, original_buffer>: Delete.
	(struct ui_out_data) <streams>: New member.
	(mi_ui_out_impl): Add data_destroy field.
	(mi_field_string, mi_field_fmt): Update.
	(mi_flush, mi_redirect, field_separator): Update.
	(mi_open, mi_close): Update.
	(mi_out_buffered, mi_out_rewind, mi_out_put): Update.
	(mi_out_data_ctor, mi_out_data_dtor): New functions.
	(mi_out_new): Call mi_out_data_ctor.

2015-08-18  Sandra Loosemore  <sandra@codesourcery.com>

	* remote.c (strprefix): New.
	(remote_parse_stop_reply): Use strprefix instead of strncmp
	to ensure exact match of keyword.

2015-08-18  Andrew Burgess  <andrew.burgess@embecosm.com>

	* gdb_bfd.c (debug_bfd_cache): New variable.
	(show_bfd_cache_debug): New function.
	(gdb_bfd_open): Add debug logging.
	(gdb_bfd_ref): Likewise.
	(gdb_bfd_unref): Likewise.
	(_initialize_gdb_bfd): Add new set/show command.
	* NEWS: Mention new command.

2015-08-18  Andrew Burgess  <andrew.burgess@embecosm.com>

	* gdb_bfd.c (bfd_sharing): New variable.
	(show_bfd_sharing): New function.
	(gdb_bfd_open): Check bfd_sharing variable.
	(_initialize_gdb_bfd): Add new set/show command.
	* NEWS: Mention new command.

2015-08-18  Andrew Burgess  <andrew.burgess@embecosm.com>

	* gdb_bfd.c (struct gdb_bfd_data): Add size, inode, and device id
	field.
	(struct gdb_bfd_cache_search): Likewise.
	(eq_bfd): Compare the size, inode, and device id fields.
	(gdb_bfd_open): Initialise the size, inode, and device id fields.
	(gdb_bfd_ref): Likewise.
	(gdb_bfd_unref): Likewise.

2015-08-18  Pedro Alves  <palves@redhat.com>

	* linux-nat.c (linux_nat_always_non_stop_p): If the linux_ops
	target implements to_always_non_stop_p, call it.
	* x86-linux-nat.c (x86_linux_always_non_stop_p): New function.
	(x86_linux_create_target): Install it as to_always_non_stop_p
	method.

2015-08-17  Doug Evans  <dje@google.com>

	* ui-out.c (default_ui_out_impl): Add comment.

2015-08-17  Iain Buclaw  <ibuclaw@gdcproject.org>

	* d-exp.y (type_aggregate_p): New function.
	(PrimaryExpression : TypeExp '.' IdentifierExp): Use it.
	(classify_inner_name): Likewise.
	* d-namespace.c (d_lookup_nested_symbol): Handle TYPE_CODE_ENUM.

2015-08-15  Doug Evans  <xdje42@gmail.com>

	* psymtab.c (add_psymbol_to_bcache): Remove "val" arg.  All callers
	updated.
	(add_psymbol_to_list): Ditto.

2015-08-15  Doug Evans  <xdje42@gmail.com>

	* dbxread.c (dbx_end_psymtab): Renamed from end_psymtab.  All callers
	updated.  Call end_psymtab_common.
	* dwarf2read.c (process_psymtab_comp_unit_reader): Call
	end_psymtab_common.
	(build_type_psymtabs_reader): Ditto.
	* psympriv.h (sort_pst_symbols): Delete.
	(end_psymtab_common): Declare.
	* psymtab.c (sort_pst_symbols): Make static.
	(end_psymtab_common): New function.
	* xcoffread.c (xcoff_end_psymtab): Call end_psymtab_common.

2015-08-15  Doug Evans  <xdje42@gmail.com>

	* defs.h (LANGUAGE_BITS): Define.
	* psympriv.h (partial_symbol) <domain>: Use SYMBOL_DOMAIN_BITS.
	(partial_symbol) <aclass>: Use SYMBOL_ACLASS_BITS.
	* symtab.h (general_symbol_info> <language>: Usage LANGUAGE_BITS.
	(minimal_symbol_type): Add nr_minsym_types.
	(MINSYM_TYPE_BITS): Define.
	(minimal_symbol) <type>: Use MINSYM_TYPE_BITS.
	(domain_enum_tag): Add NR_DOMAINS.
	(SYMBOL_DOMAIN_BITS): Change from 4 to 3.
	(SYMBOL_ACLASS_BITS): Define from 6 to 5.

2015-08-15  Doug Evans  <xdje42@gmail.com>

	* objfiles.h: Whitespace cleanup.
	* psympriv.h: Whitespace cleanup.
	* psymtab.c: Whitespace/coding convention cleanup.

2015-08-15  Patrick Palka  <patrick@parcs.ath.cx>

	* inferior.c (detach_inferior_command): Don't call
	any_thread_of_process when pid is 0.
	(kill_inferior_command): Likewise.

2015-08-14  Doug Evans  <xdje42@gmail.com>

	PR gdb/11833
	* NEWS: Document new /s modifier for the disassemble command.
	* cli/cli-cmds.c (disassemble_command): Add support for /s.
	(_initialize_cli_cmds): Update online docs of disassemble command.
	* disasm.c: #include "source.h".
	(struct deprecated_dis_line_entry): Renamed from dis_line_entry.
	All uses updated.
	(dis_line_entry): New struct.
	(hash_dis_line_entry, eq_dis_line_entry): New functions.
	(allocate_dis_line_table): New functions.
	(maybe_add_dis_line_entry, line_has_code_p): New functions.
	(dump_insns): New arg end_pc.  All callers updated.
	(do_mixed_source_and_assembly_deprecated): Renamed from
	do_mixed_source_and_assembly.  All callers updated.
	(do_mixed_source_and_assembly): New function.
	(gdb_disassembly): Handle /s (DISASSEMBLY_SOURCE).
	* disasm.h (DISASSEMBLY_SOURCE_DEPRECATED): Renamed from
	DISASSEMBLY_SOURCE.  All uses updated.
	(DISASSEMBLY_SOURCE): New macro.
	* mi/mi-cmd-disas.c (mi_cmd_disassemble): New modes 4,5.

2015-08-14  Keith Seitz  <keiths@redhat.com>

	* d-exp.y (PrimaryExpression : TypeExp '.' IdentifierExp): Rename
	`typename' to `type_name' to avoid C++ reserved word.

2015-08-14  Keith Seitz  <keiths@redhat.com>

	* location.c (EL_TYPE, EL_LINESPEC, EL_PROBE, EL_ADDRESS)
	(EL_EXPLICIT, EL_STRING): Change macro parameter to "P" to
	silence ARI errors.

2015-08-14  Iain Buclaw  <ibuclaw@gdcproject.org>

	* d-exp.y (PrimaryExpression : TypeExp '.' IdentifierExp): Use
	xstrprintf instead of malloc and sprintf.
	(PrimaryExpression : IdentifierExp): Avoid operator at end of line.
	(lex_one_token): Likewise.

2015-08-14  Matthew Fortune  <matthew.fortune@imgtec.com>

	* solib-svr4.c (read_program_header): Add base_addr argument to
	report the runtime address of the segment.
	(find_program_interpreter): Update read_program_header call to pass
	a NULL pointer for the new argument.
	(scan_dyntag): Add ptr_addr argument to report the runtime address
	of the tag payload.
	(scan_dyntag_auxv): Likewise and use thew new base_addr argument of
	read_program_header to get the base address of the dynamic segment.
	(elf_locate_base): Update uses of scan_dyntag, scan_dyntag_auxv and
	read_program_header.
	(elf_locate_base): Scan for and handle DT_MIPS_RLD_MAP_REL.

2015-08-14  Matthew Fortune  <matthew.fortune@imgtec.com>

	* MAINTAINERS (Write After Approval): Add Matthew Fortune.

2015-08-13  Iain Buclaw  <ibuclaw@gdcproject.org>

	* d-exp.y (%union): Add voidval.
	(%token): Add UNKNOWN_NAME as a token to represent an unclassified
	name in the lexing stage.
	(PostfixExpression): Move symbol completion handling in grammar here
	from PrimaryExpression.
	(PrimaryExpression): Move routines to handle resolving identifier
	tokens in the grammar here from push_expression_name.
	(IdentifierExp): Remove the handling of alternating '.' and identifier
	tokens.
	(TypeExp): Allow TypeExp to be wrapped in parenthesis in the grammar.
	(BasicType): Remove C-style typename rules.
	(d_type_from_name, d_module_from_name, push_variable)
	(push_fieldnames, push_type_name, push_module_name)
	(push_expression_name): Remove.
	(lex_one_token): Rename from yylex.  Replace pstate with par_state.
	(token_and_value): New type.
	(token_fifo, popping, name_obstack): New globals.
	(classify_name): New function.
	(classify_inner_name): Likewise.
	(yylex): Likewise.
	(d_parse): Initialize token_fifo, popping and name_obstack.

2015-08-13  Iain Buclaw  <ibuclaw@gdcproject.org>

	* Makefile.in (SFILES): Add d-namespace.c.
	(COMMON_OBS): Add d-namespace.o.
	* d-lang.c (d_language_defn): Use d_lookup_symbol_nonlocal as the
	la_lookup_symbol_nonlocal callback function pointer.
	* d-lang.h (d_lookup_symbol_nonlocal): New declaration.
	(d_lookup_nested_symbol): New declaration.
	* d-namespace.c: New file.

2015-08-13  Pedro Alves  <palves@redhat.com>

	* python/py-unwind.c (pyuw_sniffer): Install the invalidate
	cleanup after the decref cleanup, not before.

2015-08-13  Pierre-Marie de Rodat  <derodat@adacore.com>

	* ada-lang.c: Include namespace.h
	(aux_add_nonlocal_symbols): Fix a function name in comment.
	(ada_add_block_renamings): New.
	(add_nonlocal_symbols): Add global renamings handling.
	(ada_lookup_symbol_list_worker): Move the symbol lookup part
	to...
	(ada_add_all_symbols): ... this new function.
	(ada_add_block_symbols): Try to match the input name against the
	"using directives list", perform a recursive symbol lookup on
	the matched declarations.
	* block.h (struct block): Move the_namespace to top-level as
	namespace_info. Remove the language_specific field.
	(BLOCK_NAMESPACE): Update access to the namespace_info field.
	* buildsym.h (using_directives): Rename into...
	(local_using_directives): ... this.
	(global_using_directives): New.
	(struct context_stack): Rename the using_directives field into
	local_using_directives.
	* buildsym.c (finish_block_internal): Deal with the proper
	using directives repository (local or global).
	(prepare_for_building): Reset local_using_directives. Assert
	that there is no pending global using directive.
	(reset_symtab_globals): Reset global_using_directives and
	local_using_directives.
	(end_symtab_get_static_block): Don't ignore symtabs that have
	only using directives.
	(push_context): Update references to local_using_directives.
	(buildsym_init): Do not reset using_directives.
	* cp-support.c: Include namespace.h.
	* cp-support.h (struct using_direct): Move to namespace.h.
	(cp_add_using_directives): Move to namespace.h.
	* cp-namespace.c: Include namespace.h
	(cp_add_using_directive): Move to namespace.c, rename it to
	add_using_directive, add a "using_directives" argument and use
	it as the pending using directives repository.  All callers
	updated.
	* dwarf2read.c (using_directives): New.
	(read_import_statement): Call using_directives.
	(read_func_scope): Update references to local_using_directives.
	(read_lexical_block_scope): Likewise.
	(read_namespace): Update the heading comment, call
	using_directives.
	* namespace.h: New file.
	* namespace.c: New file.
	* Makefile.in (SFILES): Add namespace.c.
	(COMMON_OBS): Add namespace.o

2015-08-12  Joel Brobecker  <brobecker@adacore.com>

	* amd64-tdep.c (amd64_displaced_step_fixup): Fix the mask used to
	compute RETADDR.

2015-08-12  Keith Seitz  <keiths@redhat.com>

	* break-catch-throw.c (re_set_exception_catchpoint) Rename
	reserved C++ keyword "explicit" to "explicit_loc".
	* breakpoint.c (create_overlay_event_breakpoint)
	(create_longjmp_master_breakpoint)
	(create_std_terminate_master_breakpoint)
	(create_exception_master_breakpoint, update_static_tracepoint):
	Rename reserved C++ keyword "explicit" to "explicit_loc".
	* completer.c (collect_explicit_location_matches)
	(explicit_location_completer): Rename reserved C++ keyword
	"explicit" to "explicit_loc".
	* linespec.c (struct linespec) <explicit>: Rename to "explicit_loc".
	(canonicalize_linespec, create_sals_line_offset)
	(convert_linespec_to_sals, convert_explicit_location_to_sals)
	(event_location_to_sals, decode_objc): Rename reserved C++ keyword
	"explicit" to "explicit_loc".
	* location.c (struct event_location) <explicit>: Rename to
	"explicit_loc".
	(initialize_explicit_location, new_explicit_location)
	(explicit_location_to_string_internal, explicit_location_to_linespec):
	Rename reserved C++ keyword "explicit" to "explicit_loc".
	* location.h (explicit_location_to_string)
	(explicit_location_to_linespec, initialize_explicit_location)
	(new_explicit_location): Rename reserved C++ keyword "explicit"
	to "explicit_loc".
	* mi/mi-cmd-break.c (mi_cmd_break_insert_1): Rename reserved C++
	keyword "explicit" to "explicit_loc".

2015-08-12  Keith Seitz  <keiths@redhat.com>

	* python/python.c (gdbpy_decode_line): Initialize `location' to NULL
	and only call decode_line_1 when it is non-NULL.

2015-08-12  Luis Machado  <lgustavo@codesourcery.com>

	* breakpoint.c (bp_loc_is_permanent): Return 0 when breakpoint
	location address is not meaningful.
	(breakpoint_address_is_meaningful): Update comment.

2015-08-11  Keith Seitz  <keiths@redhat.com>

	* NEWS: Mention explicit locations.
	* breakpoint.c [LOCATION_HELP_STRING]: New macro.
	[BREAK_ARGS_HELP]: Use LOCATION_HELP_STRING.
	(_initialize_breakpoint): Update documentation for
	"clear", "break", "trace", "strace", "ftrace", and "dprintf".

2015-08-11  Keith Seitz  <keiths@redhat.com>

	* mi/mi-cmd-break.c (mi_cmd_break_insert_1): Add support for
	explicit locations, options "--source", "--function",
	"--label", and "--line".

2015-08-11  Keith Seitz  <keiths@redhat.com>

	* completer.c: Include location.h.
	(enum match_type): New enum.
	(location_completer): Rename to ...
	(linespec_completer): ... this.
	(collect_explicit_location_matches, backup_text_ptr)
	(explicit_location_completer): New functions.
	(location_completer): "New" function; handle linespec
	and explicit location completions.
	(complete_line_internal): Remove all location completer-specific
	handling.
	* linespec.c (linespec_lexer_lex_keyword, is_ada_operator)
	(find_toplevel_char): Export.
	(linespec_parse_line_offset): Export.
	Issue error if STRING is not numerical.
	(gdb_get_linespec_parser_quote_characters): New function.
	* linespec.h (linespec_parse_line_offset): Declare.
	(get_gdb_linespec_parser_quote_characters): Declare.
	(is_ada_operator): Declare.
	(find_toplevel_char): Declare.
	(linespec_lexer_lex_keyword): Declare.
	* location.c (explicit_to_event_location): New function.
	(explicit_location_lex_one): New function.
	(string_to_explicit_location): New function.
	(string_to_event_location): Handle explicit locations.
	* location.h (explicit_to_event_location): Declare.
	(string_to_explicit_location): Declare.

2015-08-11  Keith Seitz  <keiths@redhat.com>

	* break-catch-throw.c (re_set_exception_catchpoint): Convert
	linespec into explicit location.
	* breakpoint.c (create_overlay_breakpoint)
	(create_longjmp_master_breakpoint)
	(create_std_terminate_master_breakpoint)
	(create_exception_master_breakpoint): Convert linespec into explicit
	location.
	(update_static_tracepoint): Convert linespec into explicit location.
	* linespec.c (enum offset_relative_sign, struct line_offset): Move
	location.h.
	(struct linespec) <expression, expr_pc, source_filename>
	<function_name, label_name, line_offset>: Replace with ...
	<explicit>: ... this.
	<is_linespec>: New member.
	(PARSER_EXPLICIT): New accessor macro.
	(undefined_label_error): New function.
	(source_file_not_found_error): New function.
	(linespec_parse_basic): The parser result is now an explicit location.
	Use PARSER_EXPLICIT to access it.
	Use undefined_label_error.
	(canonicalize_linespec): Convert canonical linespec into explicit
	location.
	Move string representation of location to explicit_location_to_linespec
	and use it and explicit_location_to_string to save string
	representations of the canonical location.
	(create_sals_line_offset, convert_linespec_to_sals): `ls' contains an
	explicit location.  Update all references.
	(convert_explicit_location_to_sals): New function.
	(parse_linespec): Use PARSER_EXPLICIT to access the parser
	result's explicit location.
	(linespec_state_constructor): Initialize is_linespec.
	Use PARSER_EXPLICIT.
	(linespec_parser_delete): Use PARSER_EXPLICIT to access the parser's
	result.
	(event_location_to_sals): For linespec locations, set is_linespec.
	Handle explicit locations.
	(decode_objc): 'ls' contains an explicit location now. Update all
	references.
	(symtabs_from_filename): Use source_file_not_found_error.
	* location.c (struct event_location.u) <explicit>: New member.
	(initialize_explicit_location): New function.
	(initialize_event_location): Initialize explicit locations.
	(new_explicit_location, get_explicit_location)
	(get_explicit_location_const): New functions.
	(explicit_to_string_internal): New function; most of contents moved
	from canonicalize_linespec.
	(explicit_location_to_string): New function.
	(explicit_location_to_linespec): New function.
	(copy_event_location, delete_event_location)
	(event_location_to_string_const, event_location_empty_p): Handle
	explicit locations.
	* location.h (enum offset_relative_sign, struct line_offset): Move
	here from linespec.h.
	(enum event_location_type): Add EXPLICIT_LOCATION.
	(struct explicit_location): New structure.
	(explicit_location_to_string): Declare.
	(explicit_location_to_linespec): Declare.
	(new_explicit_location, get_explicit_locationp
	(get_explicit_location_const, initialize_explicit_location): Declare.

2015-08-11  Keith Seitz  <keiths@redhat.com>

	* break-catch-throw.c (re_set_exception_catchpoint): Convert
	linespec for stap probe to probe location.
	* breakpoint.c (create_longjmp_master_breakpoint)
	(create_exception_master_breakpoint): Likewise.
	(break_command_1): Remove local variable `arg_cp'.
	Check location type to set appropriate breakpoint ops methods.
	(trace_command): Likewise.
	* linespec.c (event_location_to_sals): Assert on probe locations.
	* location.c (EL_PROBE): Add macro definition.
	(new_probe_location, get_probe_location): New functions.
	(copy_event_location, delete_event_location, event_location_to_string)
	(string_to_event_location, event_location_empty_p): Handle probe
	locations.
	* location.h (enum event_location_type): Add PROBE_LOCATION.
	(new_probe_location, get_probe_location): Declare.
	* probe.c (parse_probes): Assert that LOCATION is a probe location.
	Convert linespec into probe location.

2015-08-11  Keith Seitz  <keiths@redhat.com>

	* breakpoint.c (create_thread_event_breakpoint, init_breakpoint_sal):
	Convert linespec to address location.
	* linespec.c (canonicalize_linespec): Do not handle address
	locations here.
	(convert_address_location_to_sals): New function; contents moved
	from ...
	(convert_linespc_to_sals): ... here.
	(parse_linespec): Remove address locations from linespec grammar.
	Remove handling of address locations.
	(linespec_lex_to_end): Remove handling of address linespecs.
	(event_location_to_sals): Handle ADDRESS_LOCATION.
	(linespec_expression_to_pc): Export.
	* linespec.h (linespec_expression_to_pc): Add declaration.
	* location.c (struct event_location.u) <address>: New member.
	(new_address_location, get_address_location): New functions.
	(copy_event_location, delete_event_location, event_location_to_string)
	(string_to_event_location, event_location_empty_p): Handle address
	locations.
	* location.h (enum event_location_type): Add ADDRESS_LOCATION.
	(new_address_location, get_address_location): Declare.
	* python/py-finishbreakpoint.c (bpfinishpy_init): Convert linespec
	to address location.
	* spu-tdep.c (spu_catch_start): Likewise.

2015-08-11  Keith Seitz  <keiths@redhat.com>

	* ax-gdb.c: Include location.h.
	(agent_command_1) Use linespec location instead of address
	string.
	* break-catch-throw.c: Include location.h.
	(re_set_exception_catchpoint): Use linespec locations instead
	of address strings.
	* breakpoint.c: Include location.h.
	(create_overlay_event_breakpoint, create_longjmp_master_breakpoint)
	(create_std_terminate_master_breakpoint)
	(create_exception_master_breakpoint, update_breakpoints_after_exec):
	Use linespec location instead of address string.
	(print_breakpoint_location):  Use locations and
	event_location_to_string.
	Print extra_string for pending locations for non-MI streams.
	(print_one_breakpoint_location): Use locations and
	event_location_to_string.
	(init_raw_breakpoint_without_location): Initialize b->location.
	(create_thread_event_breakpoint): Use linespec location instead of
	address string.
	(init_breakpoint_sal): Likewise.
	Only save extra_string if it is non-NULL and not the empty string.
	Use event_location_to_string instead of `addr_string'.
	Constify `p' and `endp'.
	Use skip_spaces_const/skip_space_const instead of non-const versions.
	Copy the location into the breakpoint.
	If LOCATION is NULL, save the breakpoint address as a linespec location
	instead of an address string.
	(create_breakpoint_sal): Change `addr_string' parameter to a struct
	event_location. All uses updated.
	(create_breakpoints_sal): Likewise for local variable `addr_string'.
	(parse_breakpoint_sals): Use locations instead of address strings.
	Remove check for empty linespec with conditional.
	Refactor.
	(decode_static_tracepoint_spec): Make argument const and update
	function.
	(create_breakpoint): Change `arg' to a struct event_location and
	rename.
	Remove `copy_arg' and `addr_start'.
	If EXTRA_STRING is empty, set it to NULL.
	Don't populate `canonical' for pending breakpoints.
	Pass `extra_string' to find_condition_and_thread.
	Clear `extra_string' if `rest' was NULL.
	Do not error with "garbage after location" if setting a dprintf
	breakpoint.
	Copy the location into the breakpoint instead of an address string.
	(break_command_1): Use string_to_event_location and pass this to
	create_breakpoint instead of an address string.
	Check against `arg_cp' for a probe linespec.
	(dprintf_command): Use string_to_event_location and pass this to
	create_breakpoint instead of an address string.
	Throw an exception if no format string was specified.
	(print_recreate_ranged_breakpoint): Use event_location_to_string
	instead of address strings.
	(break_range_command, until_break_command)
	(init_ada_exception_breakpoint): Use locations instead
	of address strings.
	(say_where): Print out extra_string for pending locations.
	(base_breakpoint_dtor): Delete `location' and `location_range_end' of
	the breakpoint.
	(base_breakpoint_create_sals_from_location): Use struct event_location
	instead of address string.
	Remove `addr_start' and `copy_arg' parameters.
	(base_breakpoint_decode_location): Use struct event_location instead of
	address string.
	(bkpt_re_set): Use locations instead of address strings.
	Use event_location_empty_p to check for unset location.
	(bkpt_print_recreate): Use event_location_to_string instead of
	an address string.
	Print out extra_string for pending locations.
	(bkpt_create_sals_from_location, bkpt_decode_location)
	(bkpt_probe_create_sals_from_location): Use struct event_location
	instead of address string.
	(bkpt_probe_decode_location): Use struct event_location instead of
	address string.
	(tracepoint_print_recreate): Use event_location_to_string to
	recreate the tracepoint.
	(tracepoint_create_sals_from_location, tracepoint_decode_location)
	(tracepoint_probe_create_sals_from_location)
	(tracepoint_probe_decode_location): Use struct event_location
	instead of address string.
	(dprintf_print_recreate): Use event_location_to_string to recreate
	the dprintf.
	(dprintf_re_set): Remove check for valid/missing format string.
	(strace_marker_create_sals_from_location)
	(strace_marker_create_breakpoints_sal, strace_marker_decode_location)
	(update_static_tracepoint): Use struct event_location instead of
	address string.
	(location_to_sals): Likewise.
	Pass `extra_string' to find_condition_and_thread.
	For newly resolved pending breakpoint locations, clear the location's
	string representation.
	Assert that the breakpoint's condition string is NULL when
	condition_not_parsed.
	(breakpoint_re_set_default, create_sals_from_location_default)
	(decode_location_default, trace_command, ftrace_command)
	(strace_command, create_tracepoint_from_upload): Use locations
	instead of address strings.
	* breakpoint.h (struct breakpoint_ops) <create_sals_from_location>:
	Use struct event_location instead of address string.
	Update all uses.
	<decode_location>: Likewise.
	(struct breakpoint) <addr_string>: Change to struct event_location
	and rename `location'.
	<addr_string_range_end>: Change to struct event_location and rename
	`location_range_end'.
	(create_breakpoint): Use struct event_location instead of address
	string.
	* cli/cli-cmds.c: Include location.h.
	(edit_command, list_command): Use locations instead of address strings.
	* elfread.c: Include location.h.
	(elf_gnu_ifunc_resolver_return_stop): Use event_location_to_string.
	* guile/scm-breakpoint.c: Include location.h.
	(bpscm_print_breakpoint_smob): Use event_location_to_string.
	(gdbscm_register_breakpoint): Use locations instead of address
	strings.
	* linespec.c: Include location.h.
	(struct ls_parser) <stream>: Change to const char *.
	(PARSER_STREAM): Update.
	(lionespec_lexer_lex_keyword): According to find_condition_and_thread,
	keywords must be followed by whitespace.
	(canonicalize_linespec): Save a linespec location into `canonical'.
	Save a canonical linespec into `canonical'.
	(parse_linespec): Change `argptr' to const char * and rename `arg'.
	All uses updated.
	Update function description.
	(linespec_parser_new): Initialize `parser'.
	Update initialization of  parsing stream.
	(event_location_to_sals): New function.
	(decode_line_full): Change `argptr' to a struct event_location and
	rename it `location'.
	Use locations instead of address strings.
	Call event_location_to_sals instead of parse_linespec.
	(decode_line_1): Likewise.
	(decode_line_with_current_source, decode_line_with_last_displayed)
	Use locations instead of address strings.
	(decode_objc): Likewise.
	Change `argptr' to const char * and rename `arg'.
	(destroy_linespec_result): Delete the linespec result's location
	instead of freeing the address string.
	* linespec.h (struct linespec_result) <addr_string>: Change to
	struct event_location and rename to ...
	<location>: ... this.
	(decode_line_1, decode_line_full): Change `argptr' to struct
	event_location.  All callers updated.
	* mi/mi-cmd-break.c: Include language.h, location.h, and linespec.h.
	(mi_cmd_break_insert_1): Use locations instead of address strings.
	Throw an error if there was "garbage" at the end of the specified
	linespec.
	* probe.c: Include location.h.
	(parse_probes): Change `argptr' to struct event_location.
	Use event locations instead of address strings.
	* probe.h (parse_probes): Change `argptr' to struct event_location.
	* python/py-breakpoint.c: Include location.h.
	(bppy_get_location): Constify local variable `str'.
	Use event_location_to_string.
	(bppy_init): Use locations instead of address strings.
	* python/py-finishbreakpoint.c: Include location.h.
	(bpfinishpy_init): Remove local variable `addr_str'.
	Use locations instead of address strings.
	* python/python.c: Include location.h.
	(gdbpy_decode_line): Use locations instead of address strings.
	* remote.c: Include location.h.
	(remote_download_tracepoint): Use locations instead of address
	strings.
	* spu-tdep.c: Include location.h.
	(spu_catch_start): Remove local variable `buf'.
	Use locations instead of address strings.
	* tracepoint.c: Include location.h.
	(scope_info): Use locations instead of address strings.
	(encode_source_string): Constify parameter `src'.
	* tracepoint.h (encode_source_string): Likewise.

2015-08-11  Keith Seitz  <keiths@redhat.com>

	* Makefile.in (SFILES): Add location.c.
	(HFILES_NO_SRCDIR): Add location.h.
	(COMMON_OBS): Add location.o.
	* linespec.c (linespec_lex_to_end): New function.
	* linespec.h (linespec_lex_to_end): Declare.
	* location.c: New file.
	* location.h: New file.

2015-08-11  Keith Seitz  <keiths@redhat.com>

	* breakpoint.h (struct breakpoint_ops) <create_sals_from_address>:
	Renamed to create_sals_from_location.
	<decode_linespec>: Renamed to decode_location.
	Update all callers.
	* breakpoint.c (create_sals_from_address_default): Renamed to ...
	(create_sals_from_location_default): ... this.
	(addr_string_to_sals): Renamed to ...
	(location_to_sals): ... this.
	(decode_linespec_default): Renamed to ...
	(decode_location_default): ... this.
	(base_breakpoint_create_sals_from_address): Renamed to ...
	(base_breakpoint_create_sals_from_location): ... this.
	(bkpt_create_sals_from_address): Renamed to ...
	(bkpt_create_sals_from_location): ... this.
	(bkpt_decode_linespec): Renamed to ...
	(bkpt_decode_location): ... this.
	(bkpt_probe_create_sals_from_address): Renamed to ...
	(bkpt_probe_create_sals_from_location): ... this.
	(tracepoint_create_sals_from_address): Renamed to ...
	(tracepoint_create_sals_from_location): ... this.
	(tracepoint_decode_linespec): Renamed to ...
	(tracepoint_decode_location): ... this.
	(tracepoint_probe_create_sals_from_address): Renamed to ...
	(tracepoint_probe_create_sals_from_location): ... this.
	(tracepoint_probe_decode_linespec): Renamed to ...
	(tracepoint_probe_decode_location): ... this.
	(strace_marker_create_sals_from_address): Renamed to ...
	(strace_marker_create_sals_from_location): ... this.
	(decode_linespec_default): Renamed to ...
	(decode_location_default): ... this.

2015-08-10  Doug Evans  <dje@google.com>
	    Keith Seitz  <keiths@redhat.com>

	PR gdb/17960
	* symtab.c (make_file_symbol_completion_list_1): Renamed from
	make_file_symbol_completion_list and made static.
	(make_file_symbol_completion_list): New function.

2015-08-10  Joel Brobecker  <brobecker@adacore.com>

	* infrun.c (follow_fork, displaced_step_prepare, resume): Remove
	trailing new-line at end of warning message.
	(proceed): Add i18n marker to error messages.

2015-08-07  Pedro Alves  <palves@redhat.com>

	* linux-nat.c (linux_nat_always_non_stop_p): Return 1.

2015-08-07  Pedro Alves  <palves@redhat.com>

	* s390-linux-tdep.c (is_non_branch_ril)
	(s390_displaced_step_copy_insn): New functions.
	(s390_displaced_step_fixup): Update comment.
	(s390_gdbarch_init): Install s390_displaced_step_copy_insn as
	gdbarch_displaced_step_copy_insn hook.

2015-08-07  Pedro Alves  <palves@redhat.com>

	* infrun.c (displaced_step_prepare_throw): Return -1 if
	gdbarch_displaced_step_copy_insn returns NULL.  Update intro
	comment.
	* rs6000-tdep.c (LWARX_MASK, LWARX_INSTRUCTION, LDARX_INSTRUCTION)
	(STWCX_MASK, STWCX_INSTRUCTION, STDCX_INSTRUCTION): Move higher up
	in file.
	(ppc_displaced_step_copy_insn): New function.
	(ppc_displaced_step_fixup): Update comment.
	(rs6000_gdbarch_init): Install ppc_displaced_step_copy_insn as
	gdbarch_displaced_step_copy_insn hook.
	* gdbarch.sh (displaced_step_copy_insn): Document what happens on
	NULL return.
	* gdbarch.h: Regenerate.

2015-08-07  Pedro Alves  <palves@redhat.com>

	* inferior.h (struct inferior) <displaced_stepping_failed>: New
	field.
	* infrun.c (use_displaced_stepping_now_p): New parameter 'inf'.
	Return false if dispaced stepping failed before.
	(resume): Pass the current inferior to
	use_displaced_stepping_now_p.  Wrap displaced_step_prepare in
	TRY/CATCH.  If we get a MEMORY_ERROR, set the inferior's
	displaced_stepping_failed flag, and fall back to an in-line
	step-over.

2015-08-07  Pedro Alves  <palves@redhat.com>

	* darwin-nat.c (darwin_stop): Rename to ...
	(darwin_interrupt): ... this.
	(_initialize_darwin_inferior): Adjust.
	* gnu-nat.c (gnu_stop): Delete.
	(gnu_target): Don't install gnu_stop.
	* inf-ptrace.c (inf_ptrace_stop): Rename to ...
	(inf_ptrace_interrupt): ... this.
	(inf_ptrace_target): Adjust.
	* infcmd.c (interrupt_target_1): Use target_interrupt instead of
	target_stop.
	* linux-nat (linux_nat_stop): Rename to ...
	(linux_nat_interrupt): ... this.
	(linux_nat_stop): Reimplement.
	(linux_nat_add_target): Install linux_nat_interrupt.
	* nto-procfs.c (nto_interrupt_twice): Rename to ...
	(nto_handle_sigint_twice): ... this.
	(nto_interrupt): Rename to ...
	(nto_handle_sigint): ... this.  Call target_interrupt instead of
	target_stop.
	(procfs_wait): Adjust.
	(procfs_stop): Rename to ...
	(procfs_interrupt): ... this.
	(init_procfs_targets): Adjust.
	* procfs.c (procfs_stop): Rename to ...
	(procfs_interrupt): ... this.
	(procfs_target): Adjust.
	* remote-m32r-sdi.c (m32r_stop): Rename to ...
	(m32r_interrupt): ... this.
	(init_m32r_ops): Adjust.
	* remote-sim.c (gdbsim_stop_inferior): Rename to ...
	(gdbsim_interrupt_inferior): ... this.
	(gdbsim_stop): Rename to ...
	(gdbsim_interrupt): ... this.
	(gdbsim_cntrl_c): Adjust.
	(init_gdbsim_ops): Adjust.
	* remote.c (sync_remote_interrupt): Adjust comments.
	(remote_stop_as): Rename to ...
	(remote_interrupt_as): ... this.
	(remote_stop): Adjust comment.
	(remote_interrupt): New function.
	(init_remote_ops): Install remote_interrupt.
	* target.c (target_interrupt): New function.
	* target.h (struct target_ops) <to_interrupt>: New field.
	(target_interrupt): New declaration.
	* windows-nat.c (windows_stop): Rename to ...
	(windows_interrupt): ... this.
	* target-delegates.c: Regenerate.

2015-08-07  Pedro Alves  <palves@redhat.com>

	* signal-while-stepping-over-bp-other-thread.exp: Expect "restart
	threads" as alternative to "switching back to stepped thread".

2015-08-07  Pedro Alves  <palves@redhat.com>

	* NEWS: Mention "maint set/show target-non-stop".
	* breakpoint.c (update_global_location_list): Check
	target_is_non_stop_p instead of non_stop.
	* infcmd.c (attach_command_post_wait, attach_command): Likewise.
	* infrun.c (show_can_use_displaced_stepping)
	(can_use_displaced_stepping_p, start_step_over_inferior):
	Likewise.
	(internal_resume_ptid): New function.
	(resume): Use it.
	(proceed): Check target_is_non_stop_p instead of non_stop.  If in
	all-stop mode but the target is always in non-stop mode, start all
	the other threads that are implicitly resumed too.
	(for_each_just_stopped_thread, fetch_inferior_event)
	(adjust_pc_after_break, stop_all_threads): Check
	target_is_non_stop_p instead of non_stop.
	(handle_inferior_event): Likewise.  Handle detach-fork in all-stop
	with the target always in non-stop mode.
	(handle_signal_stop) <random signal>: Check target_is_non_stop_p
	instead of non_stop.
	(switch_back_to_stepped_thread): Check target_is_non_stop_p
	instead of non_stop.
	(keep_going_stepped_thread): Use internal_resume_ptid.
	(stop_waiting): If in all-stop mode, and the target is in non-stop
	mode, stop all threads.
	(keep_going_pass): Likewise, when starting a new in-line step-over
	sequence.
	* linux-nat.c (get_pending_status, select_event_lwp)
	(linux_nat_filter_event, linux_nat_wait_1, linux_nat_wait): Check
	target_is_non_stop_p instead of non_stop.
	(linux_nat_always_non_stop_p): New function.
	(linux_nat_stop): Check target_is_non_stop_p instead of non_stop.
	(linux_nat_add_target): Install linux_nat_always_non_stop_p.
	* target-delegates.c: Regenerate.
	* target.c (target_is_non_stop_p): New function.
	(target_non_stop_enabled, target_non_stop_enabled_1): New globals.
	(maint_set_target_non_stop_command)
	(maint_show_target_non_stop_command): New functions.
	(_initilize_target): Install "maint set/show target-non-stop"
	commands.
	* target.h (struct target_ops) <to_always_non_stop_p>: New field.
	(target_non_stop_enabled): New declaration.
	(target_is_non_stop_p): New declaration.

2015-08-07  Pedro Alves  <pedro@codesourcery.com>

	* breakpoint.c (breakpoints_should_be_inserted_now): If any thread
	has a pending status, return true.
	* gdbthread.h: Include target/waitstatus.h.
	(struct thread_suspend_state) <stop_reason, waitstatus_pending_p,
	stop_pc>: New fields.
	(struct thread_info) <resumed>: New field.
	(set_resumed): Declare.
	* infrun.c: Include "event-loop.h".
	(infrun_async_inferior_event_token, infrun_is_async): New globals.
	(infrun_async): New function.
	(clear_step_over_info): Add debug output.
	(displaced_step_in_progress_any_inferior): New function.
	(displaced_step_fixup): New returns int.
	(start_step_over): Handle in-line step-overs too.  Assert the
	thread is marked resumed.
	(resume_cleanups): Clear the thread's resumed flag.
	(resume): Set the thread's resumed flag.  Return early if the
	thread has a pending status.  Allow stepping a breakpoint with no
	signal.
	(proceed): Adjust to check 'resumed' instead of 'executing'.
	(clear_proceed_status_thread): If the thread has a pending status,
	and that status is a finished step, discard the pending status.
	(clear_proceed_status): Don't clear step_over_info here.
	(random_pending_event_thread, do_target_wait): New functions.
	(prepare_for_detach, wait_for_inferior, fetch_inferior_event): Use
	do_target_wait.
	(wait_one): New function.
	(THREAD_STOPPED_BY): New macro.
	(thread_stopped_by_watchpoint, thread_stopped_by_sw_breakpoint)
	(thread_stopped_by_hw_breakpoint): New functions.
	(switch_to_thread_cleanup, save_waitstatus, stop_all_threads): New
	functions.
	(handle_inferior_event): Also call set_resumed(false) on all
	threads implicitly stopped by the event.
	(restart_threads, resumed_thread_with_pending_status): New
	functions.
	(finish_step_over): If we were doing an in-line step-over before,
	and no longer are after trying to start a new step-over, restart
	all threads.  If we have multiple threads with pending events,
	save the current event and go through the event loop again.
	(handle_signal_stop): Return early if finish_step_over returns
	false.
	<random signal>: If we get a signal while stepping over a
	breakpoint in-line in non-stop mode, restart all threads.  Clear
	step_over_info before delivering the signal.
	(keep_going_stepped_thread): Use internal_error instead of
	gdb_assert.  Mark the thread as resumed.
	(keep_going_pass_signal): Assert the thread isn't already resumed.
	If some other thread is doing an in-line step-over, defer the
	resume.  If we just started a new in-line step-over, stop all
	threads.  Don't clear step_over_info.
	(infrun_async_inferior_event_handler): New function.
	(_initialize_infrun): Create async event handler with
	infrun_async_inferior_event_handler as callback.
	(infrun_async): New declaration.
	* target.c (target_async): New function.
	* target.h (target_async): Declare macro and readd as function
	declaration.
	* target/waitstatus.h (enum target_stop_reason)
	<TARGET_STOPPED_BY_SINGLE_STEP>: New value.
	* thread.c (new_thread): Clear the new waitstatus field.
	(set_resumed): New function.

2015-08-07  Pedro Alves  <palves@redhat.com>

	* infrun.c (keep_going_stepped_thread): New function, factored out
	from ...
	(switch_back_to_stepped_thread): ... here.

2015-08-07  Pedro Alves  <palves@redhat.com>

	* infrun.c (currently_stepping): Extend intro comment.
	* target.h (target_resume): Extend intro comment.

2015-08-07  Pedro Alves  <palves@redhat.com>

	* infrun.c (switch_back_to_stepped_thread): Use ecs->ptid instead
	of inferior_ptid.  If the stepped thread vanished, return 0
	instead of resuming here.  Use reset_ecs.  Print the prev_pc and
	the current stop_pc in log message.  Clear trap_expected if the
	thread advanced.  Don't pass currently_stepping to
	do_target_resume.

2015-08-07  Pedro Alves  <palves@redhat.com>

	* gdbthread.h (struct thread_info) <prev_pc>: Extend comment.
	* infrun.c (struct execution_control_state): Move higher up in the
	file.
	(reset_ecs): New function.
	(start_step_over): Now returns int.  Rewrite to use
	keep_going_pass_signal instead of manually starting a displaced step.
	(resume): Don't call set_running here.  If displaced stepping
	can't start now, clear trap_expected.
	(find_thread_needs_step_over): Delete function.
	(proceed): Set up finish_thread_state_cleanup.  Call set_running.
	If the current thread needs a step over, push it in the step-over
	chain.  Don't set insert breakpoints nor call resume directly
	here.  Instead rewrite to use start_step_over and
	keep_going_pass_signal.
	(finish_step_over): New function.
	(handle_signal_stop): Call finish_step_over instead of
	start_step_over.
	(switch_back_to_stepped_thread): If the event thread needs another
	step-over do that first.  Use start_step_over.
	(keep_going_pass_signal): New function, factored out from ...
	(keep_going): ... here.
	(_initialize_infrun): Comment moved here.
	* thread.c (set_running_thread): New function.
	(set_running, finish_thread_state): Use set_running_thread.

2015-08-07  Pedro Alves  <palves@redhat.com>

	* gdbthread.h (struct thread_info) <step_over_prev,
	step_over_next>: New fields.
	(thread_step_over_chain_enqueue, thread_step_over_chain_remove)
	(thread_step_over_chain_next, thread_is_in_step_over_chain): New
	declarations.
	* infrun.c (struct displaced_step_request): Delete.
	(struct displaced_step_inferior_state) <step_request_queue>:
	Delete field.
	(displaced_step_prepare): Assert that trap_expected is set.  Use
	thread_step_over_chain_enqueue.  Split starting a new displaced
	step to ...
	(start_step_over): ... this new function.
	(resume): Assert the thread isn't waiting for a step over already.
	(proceed): Assert the thread isn't waiting for a step over
	already.
	(infrun_thread_stop_requested): Adjust to remove threads from the
	embedded step-over chain.
	(handle_inferior_event) <fork/vfork>: Call start_step_over after
	displaced_step_fixup.
	(handle_signal_stop): Call start_step_over after
	displaced_step_fixup.
	* infrun.h (step_over_queue_head): New declaration.
	* thread.c (step_over_chain_enqueue, step_over_chain_remove)
	(thread_step_over_chain_next, thread_is_in_step_over_chain)
	(thread_step_over_chain_enqueue)
	(thread_step_over_chain_remove): New functions.
	(delete_thread_1): Remove thread from the step-over chain.

2015-08-07  Pedro Alves  <palves@redhat.com>

	* infrun.c (thread_still_needs_step_over): Rename to ...
	(thread_still_needs_step_over_bp): ... this.
	(enum step_over_what): New.
	(thread_still_needs_step_over): Reimplement.

2015-08-07  Pedro Alves  <palves@redhat.com>

	* remote.c (remote_wait_as): If not waiting for a stop reply,
	return TARGET_WAITKIND_NO_RESUMED.  If TARGET_WNOHANG is
	requested, don't block waiting forever.

2015-08-07  Pedro Alves  <pedro@codesourcery.com>

	* infrun.c (adjust_pc_after_break): Now takes thread_info and
	waitstatus pointers instead of an ecs.  Adjust.
	(handle_inferior_event): Adjust caller.

2015-08-07  Pedro Alves  <palves@redhat.com>

	* infrun.c (handle_inferior_event): If we get
	TARGET_WAITKIND_SIGNALLED or TARGET_WAITKIND_EXITED in non-stop
	mode, mark all threads of the exiting process as not-executing.
	(normal_stop): If we get TARGET_WAITKIND_SIGNALLED or
	TARGET_WAITKIND_EXITED in non-stop mode, finish all threads of the
	exiting process, if inferior_ptid still points at a process.
	* thread.c (struct current_thread_cleanup) <next>: New field.
	(current_thread_cleanup_chain): New global.
	(restore_current_thread_ptid_changed): New function.
	(restore_current_thread_cleanup_dtor): Remove the cleanup from the
	current_thread_cleanup_chain list.
	(make_cleanup_restore_current_thread): Add the cleanup data to the
	current_thread_cleanup_chain list.
	(_initialize_thread): Install restore_current_thread_ptid_changed
	as thread_ptid_changed observer.

2015-08-07  Joel Brobecker  <brobecker@adacore.com>

	* dtrace-probe.c (dtrace_process_dof): Ignore the objfile's DOF
	data if a DTRACE_DOF_SECT_TYPE_PROVIDER section is found to be
	smaller than expected.

2015-08-07  Andrew Burgess  <andrew.burgess@embecosm.com>

	* stack.c (get_frame_language): Moved ...
	* frame.c (get_frame_language): ... to here.
	* language.h (get_frame_language): Declaration moved to frame.h.
	* frame.h: Add language.h include, for language enum.
	(get_frame_language): Declaration moved from language.h.
	* language.c: Add frame.h include.
	* top.c: Add frame.h include.
	* symtab.h (struct obj_section): Declare.
	(struct cmd_list_element): Declare.

2015-08-07  Andrew Burgess  <andrew.burgess@embecosm.com>

	* language.c (show_language_command): Find selected frame before
	asking for the language of that frame.
	(set_language_command): Likewise.
	* language.h (get_frame_language): Add frame parameter.
	* stack.c (get_frame_language): Add frame parameter, assert
	parameter is not NULL, update comment and reindent.
	* top.c (check_frame_language_change): Pass the selected frame
	into get_frame_language.

2015-08-07  Markus Metzger  <markus.t.metzger@intel.com>

	* btrace.c (btrace_compute_ftrace_bts): Clear insn flags.
	(pt_btrace_insn_flags): New.
	(ftrace_add_pt): Call pt_btrace_insn_flags.
	* btrace.h (btrace_insn_flag): New.
	(btrace_insn) <flags>: New.
	* record-btrace.c (btrace_insn_history): Print insn prefix.
	* NEWS: Announce it.

2015-08-07  Markus Metzger  <markus.t.metzger@intel.com>

	* configure.ac: Check for PERF_ATTR_SIZE_VER5 in linux/perf_event.h
	* configure: Regenerate.

2015-08-06  Yaakov Selkowitz  <yselkowi@redhat.com>

	* Makefile.in (LIBICONV): Define.
	(CLIBS): Add LIBICONV.
	* acinclude.m4: Use config/iconv.m4 instead of custom AM_ICONV.
	* configure: Regenerate.

2015-08-06  Simon Marchi  <simon.marchi@ericsson.com>
	    Pedro Alves  <palves@redhat.com>

	* arm-tdep.c (set_fp_model_sfunc): Add cast from integer to enum.
	(arm_set_abi): Likewise.
	* ax-general.c (ax_print): Likewise.
	* c-exp.y (exp : string_exp): Likewise.
	* compile/compile-loc2c.c (compute_stack_depth_worker): Likewise.
	(do_compile_dwarf_expr_to_c): Likewise.
	* cp-name-parser.y (demangler_special : DEMANGLER_SPECIAL start):
	Likewise.
	* dwarf2expr.c (execute_stack_op): Likewise.
	* dwarf2loc.c (dwarf2_compile_expr_to_ax): Likewise.
	(disassemble_dwarf_expression): Likewise.
	* dwarf2read.c (dwarf2_add_member_fn): Likewise.
	(read_array_order): Likewise.
	(abbrev_table_read_table): Likewise.
	(read_attribute_value): Likewise.
	(skip_unknown_opcode): Likewise.
	(dwarf_decode_macro_bytes): Likewise.
	(dwarf_decode_macros): Likewise.
	* eval.c (value_f90_subarray): Likewise.
	* guile/scm-param.c (gdbscm_make_parameter): Likewise.
	* i386-linux-tdep.c (i386_canonicalize_syscall): Likewise.
	* infrun.c (handle_command): Likewise.
	* memory-map.c (memory_map_start_memory): Likewise.
	* osabi.c (set_osabi): Likewise.
	* parse.c (operator_length_standard): Likewise.
	* ppc-linux-tdep.c (ppc_canonicalize_syscall): Likewise, and use
	single return point.
	* python/py-frame.c (gdbpy_frame_stop_reason_string): Likewise.
	* python/py-symbol.c (gdbpy_lookup_symbol): Likewise.
	(gdbpy_lookup_global_symbol): Likewise.
	* record-full.c (record_full_restore): Likewise.
	* regcache.c (regcache_register_status): Likewise.
	(regcache_raw_read): Likewise.
	(regcache_cooked_read): Likewise.
	* rs6000-tdep.c (powerpc_set_vector_abi): Likewise.
	* symtab.c (initialize_ordinary_address_classes): Likewise.
	* target-debug.h (target_debug_print_signals): Likewise.
	* utils.c (do_restore_current_language): Likewise.

2015-08-06  Clem Dickey  <clemd@acm.org>

	PR python/17136
	* python/lib/gdb/command/type_printers.py (InfoTypePrinter): Fix typo.

2015-08-06  Simon Marchi  <simon.marchi@ericsson.com>

	* complaints.c (enum complaint_series): Add newlines and remove
	out of date comment.
	(struct complaints) <series>: Change type to enum
	complaint_series and remove out of date comment.
	(symfile_complaint_hook): Use equivalent enum value
	ISOLATED_MESSAGE instead of 0.

2015-08-06  Pedro Alves  <palves@redhat.com>

	* nat/linux-waitpid.c (my_waitpid): Only print *status if waitpid
	returned > 0.

2015-08-06  Pierre Langlois  <pierre.langlois@arm.com>

	* common/agent.c (symbol_list) <required>: Remove.

2015-08-06  Pedro Alves  <palves@redhat.com>

	* target/waitstatus.h (enum target_stop_reason)
	<TARGET_STOPPED_BY_SINGLE_STEP>: New value.

2015-08-05  Pedro Alves  <palves@redhat.com>
	    Joel Brobecker  <brobecker@adacore.com>

	* breakpoint.c (bpstat_what) <bp_longjmp, bp_longjmp_call_dummy>
	<bp_exception, bp_longjmp_resume, bp_exception_resume>: Handle the
	case where BS->STOP is not set.

2015-08-05  Ulrich Weigand  <uweigand@de.ibm.com>

	* nat/gdb_thread_db.h: Add copyright header.
	Protect against multiple inclusion.

2015-08-05  Yao Qi  <yao.qi@linaro.org>

	* aarch64-linux-nat.c (get_thread_id): Remove.
	(debug_reg_change_callback): Call ptid_get_lwp instead of
	get_thread_id.
	(fetch_gregs_from_thread): Likewise.
	(store_gregs_to_thread): Likewise.
	(fetch_fpregs_from_thread): Likewise.
	(store_fpregs_to_thread): Likewise.
	(aarch64_linux_get_debug_reg_capacity): Likewise.
	* arm-linux-nat.c (get_thread_id): Remove.
	(GET_THREAD_ID): Update macro to use ptid_get_lwp.
	* xtensa-linux-nat.c (get_thread_id): Remove.
	(GET_THREAD_ID): Update macro to use ptid_get_lwp.
	* arm-linux-nat.c (get_thread_id): Remove.
	(GET_THREAD_ID): Remove.
	(fetch_fpregs): Call ptid_get_lwp instead of GET_THREAD_ID.
	(store_fpregs, fetch_regs, store_regs): Likewise.
	(fetch_wmmx_regs, store_wmmx_regs): Likewise.
	(fetch_vfp_regs, store_vfp_regs): Likewise.
	(arm_linux_read_description): Likewise.
	(arm_linux_get_hwbp_cap): Likewise.
	* xtensa-linux-nat.c (get_thread_id): Remove.
	(GET_THREAD_ID): Remove.
	(fetch_gregs, store_gregs): Call ptid_get_lwp instead of
	GET_THREAD_ID.

2015-08-04  Ciro Santilli  <ciro.santilli@gmail.com>  (obvious patch)

	* python/py-linetable.c: Fix case of Linetable to LineTable
	in docstrings and code comments.
	* python/py-symtab.c: Same.

2015-08-04  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* infcmd.c (signal_command): Call do_cleanups for args_chain.

2015-08-04  Jan Kratochvil  <jan.kratochvil@redhat.com>

	PR gdb/18767
	* infcmd.c (attach_command): Move ARGS_CHAIN cleanup after last ARGS
	use.

2015-08-04  Pedro Alves  <palves@redhat.com>

	* nat/gdb_thread_db.h (td_init_ftype, td_ta_new_ftype)
	(td_ta_map_lwp2thr_ftype, td_ta_thr_iter_ftype)
	(td_ta_event_addr_ftype, td_ta_set_event_ftype)
	(td_ta_clear_event_ftype, td_ta_event_getmsg_ftype)
	(td_thr_validate_ftype, td_thr_get_info_ftype)
	(td_thr_event_enable_ftype, td_thr_tls_get_addr_ftype)
	(td_thr_tlsbase_ftype, td_symbol_list_ftype, td_ta_delete_ftype):
	New typedefs.
	* linux-thread-db.c (struct thread_db_info): Use new typedefs.
	(try_thread_db_load_1): Define TDB_VERBOSE_DLSYM, TDB_DLSYM , CHK
	local macros and use them instead of verbose_dlsym and dlsym
	calls.

2015-08-03  Sandra Loosemore  <sandra@codesourcery.com>

	* nios2-tdep.h: Include opcode/nios2.h here.
	(NIOS2_CDX_OPCODE_SIZE): New.
	(struct gdbarch_tdep): Add OP parameter to syscall_next_pc.
	* nios2-tdep.c: Don't include opcode/nios2.h here.
	(nios2_fetch_insn): For R2, try reading 2-byte instruction if
	4-byte read fails.
	(nios2_match_add, nios2_match_sub): Add cases for R2 encodings.
	(nios2_match_addi, nios2_match_orhi): Likewise.
	(nios2_match_stw, nios2_match_ldw): Likewise.
	(nios2_match_rdctl): Likewise.
	(nios2_match_stwm, nios2_match_ldwm): New.
	(nios2_match_branch): Add cases for R2 encodings.
	(nios2_match_jmpi, nios2_match_calli): Likewise.
	(nios2_match_jmpr, nios2_match_callr): Likewise.
	(nios2_match_break, nios2_match_trap): Likewise.
	(nios2_in_epilogue_p): Add R2 support.
	(nios2_analyze_prologue): Update comments.  Recognize R2 CDX
	prologues.
	(nios2_breakpoint_from_pc): Handle R2 instructions.
	(nios2_get_next_pc): Likewise.  Adjust call to
	tdep->syscall_next_pc.
	* nios2-linux-tdep.c (nios2_r1_linux_rt_sigreturn_tramp_frame):
	Renamed from nios2_linux_rt_sigreturn_tramp_frame.  Use
	instruction field macros instead of literal hex values.
	(nios2_r2_linux_rt_sigreturn_tramp_frame): New.
	(nios2_linux_syscall_next_pc): Adjust signature to pass OP.
	Use size field from OP instead of assuming all instructions
	are the same size.
	(nios2_linux_init_abi): Register appropriate unwinder for mach.

2015-08-03  Ulrich Weigand  <uweigand@de.ibm.com>

	* cp-namespace.c (cp_lookup_symbol_via_imports): Fix uninitialized
	variable warning with some compilers.

2015-08-03  Yao Qi  <yao.qi@linaro.org>

	* arm-linux-nat.c (arm_linux_get_hwbp_type): Capitalize "type"
	in comment.  Replace "rw" with "type".
	(arm_linux_remove_watchpoint): Change type of "rw" to
	"enum target_hw_bp_type".

2015-08-02  Pierre-Marie de Rodat  <derodat@adacore.com>

	* alpha-mdebug-tdep.c (find_proc_desc): Update call to
	lookup_symbol.
	* ft32-tdep.c (ft32_skip_prologue): Likewise.
	* moxie-tdep.c (moxie_skip_prologue): Likewise.
	* mt-tdep.c (mt_skip_prologue): Likewise.
	* xstormy16-tdep.c (xstormy16_skip_prologue): Likewise.

2015-08-01  Pierre-Marie de Rodat  <derodat@adacore.com>

	* ada-exp.y (write_object_renaming): Replace struct
	ada_symbol_info with struct block_symbol.  Update field
	references accordingly.
	(block_lookup, select_possible_type_sym): Likewise.
	(find_primitive_type): Likewise.  Also update call to
	ada_lookup_symbol to extract the symbol itself.
	(write_var_or_type, write_name_assoc): Likewise.
	* ada-lang.h (struct ada_symbol_info): Remove.
	(ada_lookup_symbol_list): Replace struct ada_symbol_info with
	struct block_symbol.
	(ada_lookup_encoded_symbol, user_select_syms): Likewise.
	(ada_lookup_symbol): Return struct block_symbol instead of a
	mere symbol.
	* ada-lang.c (defns_collected): Replace struct ada_symbol_info
	with struct block_symbol.
	(resolve_subexp, ada_resolve_function, sort_choices,
	user_select_syms, is_nonfunction, add_defn_to_vec,
	num_defns_collected, defns_collected,
	symbols_are_identical_enums, remove_extra_symbols,
	remove_irrelevant_renamings, add_lookup_symbol_list_worker,
	ada_lookup_symbol_list, ada_iterate_over_symbols,
	ada_lookup_encoded_symbol, get_var_value): Likewise.
	(ada_lookup_symbol): Return a block_symbol instead of a mere
	symbol.  Replace struct ada_symbol_info with struct
	block_symbol.
	(ada_lookup_symbol_nonlocal): Likewise.
	(standard_lookup): Make block passing explicit through
	lookup_symbol_in_language.
	* ada-tasks.c (get_tcb_types_info): Update the calls to
	lookup_symbol_in_language to extract the mere symbol out of the
	returned value.
	(ada_tasks_inferior_data_sniffer): Likewise.
	* ax-gdb.c (gen_static_field): Likewise for the call to
	lookup_symbol.
	(gen_maybe_namespace_elt): Deal with struct block_symbol from
	lookup functions.
	(gen_expr): Likewise.
	* c-exp.y: Likewise.  Remove uses of block_found.
	(lex_one_token, classify_inner_name, c_print_token): Likewise.
	(classify_name): Likewise.  Rename the "sym" local variable to
	"bsym".
	* c-valprint.c (print_unpacked_pointer): Likewise.
	* compile/compile-c-symbols.c (convert_symbol_sym): Promote the
	"sym" parameter from struct symbol * to struct block_symbol.
	Use it to remove uses of block_found.  Deal with struct
	block_symbol from lookup functions.
	(gcc_convert_symbol): Likewise.  Update the call to
	convert_symbol_sym.
	* compile/compile-object-load.c (compile_object_load): Deal with
	struct block_symbol from lookup functions.
	* cp-namespace.c (cp_lookup_nested_symbol_1,
	cp_lookup_nested_symbol, cp_lookup_bare_symbol,
	cp_search_static_and_baseclasses,
	cp_lookup_symbol_in_namespace, cp_lookup_symbol_via_imports,
	cp_lookup_symbol_imports_or_template,
	cp_lookup_symbol_via_all_imports, cp_lookup_symbol_namespace,
	lookup_namespace_scope, cp_lookup_nonlocal,
	find_symbol_in_baseclass): Return struct block_symbol instead of
	mere symbols and deal with struct block_symbol from lookup
	functions.
	* cp-support.c (inspect_type, replace_typedefs,
	cp_lookup_rtti_type): Deal with struct block_symbol from
	lookup functions.
	* cp-support.h (cp_lookup_symbol_nonlocal,
	cp_lookup_symbol_from_namespace,
	cp_lookup_symbol_imports_or_template, cp_lookup_nested_symbol):
	Return struct block_symbol instead of mere symbols.
	* d-exp.y (d_type_from_name, d_module_from_name, push_variable,
	push_module_name):
	Deal with struct block_symbol from lookup functions.  Remove
	uses of block_found.
	* eval.c (evaluate_subexp_standard): Update call to
	cp_lookup_symbol_namespace.
	* f-exp.y: Deal with struct block_symbol from lookup functions.
	Remove uses of block_found.
	(yylex): Likewise.
	* gdbtypes.c (lookup_typename, lookup_struct, lookup_union,
	lookup_enum, lookup_template_type, check_typedef): Deal with
	struct block_symbol from lookup functions.
	* guile/scm-frame.c (gdbscm_frame_read_var): Likewise.
	* guile/scm-symbol.c (gdbscm_lookup_symbol): Likewise.
	(gdbscm_lookup_global_symbol): Likewise.
	* gnu-v3-abi.c (gnuv3_get_typeid_type): Likewise.
	* go-exp.y: Likewise.  Remove uses of block_found.
	(package_name_p, classify_packaged_name, classify_name):
	Likewise.
	* infrun.c (insert_exception_resume_breakpoint): Likewise.
	* jv-exp.y (push_variable): Likewise.
	* jv-lang.c (java_lookup_class, get_java_object_type): Likewise.
	* language.c (language_bool_type): Likewise.
	* language.h (struct language_defn): Update
	la_lookup_symbol_nonlocal to return a struct block_symbol rather
	than a mere symbol.
	* linespec.c (find_label_symbols): Deal with struct block_symbol
	from lookup functions.
	* m2-exp.y: Likewise.  Remove uses of block_found.
	(yylex): Likewise.
	* mi/mi-cmd-stack.c (list_args_or_locals): Likewise.
	* objc-lang.c (lookup_struct_typedef, find_imps): Likewise.
	* p-exp.y: Likewise.  Remove uses of block_found.
	(yylex): Likewise.
	* p-valprint.c (pascal_val_print): Likewise.
	* parse.c (write_dollar_variable): Likewise.  Remove uses of
	block_found.
	* parser-defs.h (struct symtoken): Turn the SYM field into a
	struct block_symbol.
	* printcmd.c (address_info): Deal with struct block_symbol from
	lookup functions.
	* python/py-frame.c (frapy_read_var): Likewise.
	* python/py-symbol.c (gdbpy_lookup_symbol,
	gdbpy_lookup_global_symbol): Likewise.
	* skip.c (skip_function_command): Likewise.
	* solib-darwin.c (darwin_lookup_lib_symbol): Return a struct
	block_symbol instead of a mere symbol.
	* solib-spu.c (spu_lookup_lib_symbol): Likewise.
	* solib-svr4.c (elf_lookup_lib_symbol): Likewise.
	* solib.c (solib_global_lookup): Likewise.
	* solist.h (solib_global_lookup): Likewise.
	(struct target_so_ops): Update lookup_lib_global_symbol to
	return a struct block_symbol rather than a mere symbol.
	* source.c (select_source_symtab): Deal with struct block_symbol
	from lookup functions.
	* stack.c (print_frame_args, iterate_over_block_arg_vars):
	Likewise.
	* symfile.c (set_initial_language): Likewise.
	* symtab.c (SYMBOL_LOOKUP_FAILED): Turn into a struct
	block_symbol.
	(SYMBOL_LOOKUP_FAILED_P): New predicate as a macro.
	(struct symbol_cache_slot): Turn the FOUND field into a struct
	block_symbol.
	(block_found): Remove.
	(eq_symbol_entry): Update to deal with struct block_symbol in
	cache slots.
	(symbol_cache_lookup): Return a struct block_symbol rather than
	a mere symbol.
	(symbol_cache_mark_found): Add a BLOCK parameter to fill
	appropriately the cache slots.  Update callers.
	(symbol_cache_dump): Update cache slots handling to the type
	change.
	(lookup_symbol_in_language, lookup_symbol, lookup_language_this,
	lookup_symbol_aux, lookup_local_symbol,
	lookup_symbol_in_objfile, lookup_global_symbol_from_objfile,
	lookup_symbol_in_objfile_symtabs,
	lookup_symbol_in_objfile_from_linkage_name,
	lookup_symbol_via_quick_fns, basic_lookup_symbol_nonlocal,
	lookup_symbol_in_static_block, lookup_static_symbol,
	lookup_global_symbol):
	Return a struct block_symbol rather than a mere symbol.  Deal
	with struct block_symbol from other lookup functions.  Remove
	uses of block_found.
	(lookup_symbol_in_block): Remove uses of block_found.
	(struct global_sym_lookup_data): Turn the RESULT field into a
	struct block_symbol.
	(lookup_symbol_global_iterator_cb): Update references to the
	RESULT field.
	(search_symbols): Deal with struct block_symbol from lookup
	functions.
	* symtab.h (struct block_symbol): New structure.
	(block_found): Remove.
	(lookup_symbol_in_language, lookup_symbol,
	basic_lookup_symbol_nonlocal, lookup_symbol_in_static_block,
	lookup_static_symbol, lookup_global_symbol, lookup_language_this,
	lookup_global_symbol_from_objfile): Return a struct block_symbol
	rather than just a mere symbol.  Update comments to remove
	mentions of block_found.
	* valops.c (find_function_in_inferior,
	value_struct_elt_for_reference, value_maybe_namespace_elt,
	value_of_this):  Deal with struct block_symbol from lookup
	functions.
	* value.c (value_static_field, value_fn_field): Likewise.

2015-07-31  Simon Marchi  <simon.marchi@ericsson.com>

	* remote-m32r-sdi.c (m32r_remove_watchpoint): Use enum type
	instead of integer.

2015-07-31  Simon Marchi  <simon.marchi@ericsson.com>
	    Pedro Alves  <palves@redhat.com>

	* aarch64-linux-nat.c (aarch64_linux_can_use_hw_breakpoint): Use enum
	type or value instead of integer.
	(aarch64_linux_insert_watchpoint): Likewise.
	(aarch64_linux_remove_watchpoint): Likewise.
	* ada-lang.c (ada_op_print_tab): Likewise.
	* amd64-linux-tdep.c (amd64_canonicalize_syscall): Likewise.
	(amd64_linux_syscall_record_common): Likewise.
	* arch-utils.c (target_byte_order_user): Likewise.
	(default_byte_order): Likewise.
	* arm-linux-nat.c (arm_linux_can_use_hw_breakpoint): Likewise.
	(arm_linux_get_hwbp_type): Likewise.
	(arm_linux_hw_watchpoint_initialize): Likewise.
	(arm_linux_insert_watchpoint): Likewise.
	* arm-linux-tdep.c (arm_canonicalize_syscall): Likewise.
	(arm_linux_syscall_record): Likewise.
	* breakpoint.c (update_watchpoint): Likewise.
	(breakpoint_here_p): Likewise.
	(bpstat_print): Likewise.
	(enable_breakpoint_disp): Likewise.
	* c-lang.c (c_op_print_tab): Likewise.
	* cli/cli-decode.c (add_info_alias): Likewise.
	* d-lang.c (d_op_print_tab): Likewise.
	* eval.c (evaluate_subexp_standard): Likewise.
	* f-exp.y (dot_ops): Likewise.
	(f77_keywords): Likewise.
	* f-lang.c (f_op_print_tab): Likewise.
	* go-lang.c (go_op_print_tab): Likewise.
	* guile/scm-breakpoint.c (gdbscm_make_breakpoint): Likewise.
	* guile/scm-cmd.c (gdbscm_make_command): Likewise.
	* guile/scm-param.c (gdbscm_make_parameter): Likewise.
	* guile/scm-pretty-print.c (gdbscm_apply_val_pretty_printer): Likewise.
	* guile/scm-string.c (struct scm_to_stringn_data): Likewise.
	(struct scm_from_stringn_data): Likewise.
	* i386-linux-tdep.c (i386_canonicalize_syscall): Likewise.
	* ia64-linux-nat.c (ia64_linux_insert_watchpoint): Likewise.
	(ia64_linux_remove_watchpoint): Likewise.
	(ia64_linux_can_use_hw_breakpoint): Likewise.
	* infrun.c (print_stop_event): Likewise.
	* jv-lang.c (java_op_print_tab): Likewise.
	* linux-nat.c (linux_proc_xfer_partial): Likewise.
	* linux-nat.h (struct lwp_info): Likewise.
	* linux-thread-db.c (enable_thread_event): Likewise.
	* m2-lang.c (m2_op_print_tab): Likewise.
	* mi/mi-cmd-stack.c (mi_cmd_stack_list_locals): Likewise.
	(mi_cmd_stack_list_variables): Likewise.
	* mi/mi-main.c (mi_cmd_trace_frame_collected): Likewise.
	* mi/mi-out.c (mi_table_begin): Likewise.
	(mi_table_header): Likewise.
	* mips-linux-nat.c (mips_linux_can_use_hw_breakpoint): Likewise.
	(mips_linux_insert_watchpoint): Likewise.
	(mips_linux_remove_watchpoint): Likewise.
	* nat/mips-linux-watch.c (mips_linux_watch_type_to_irw): Likewise.
	* nat/mips-linux-watch.h (struct mips_watchpoint): Likewise.
	(mips_linux_watch_type_to_irw): Likewise.
	* nto-procfs.c (procfs_can_use_hw_breakpoint): Likewise.
	(procfs_insert_hw_watchpoint): Likewise.
	(procfs_remove_hw_watchpoint): Likewise.
	(procfs_hw_watchpoint): Likewise.
	(procfs_can_use_hw_breakpoint): Likewise.
	(procfs_remove_hw_watchpoint): Likewise.
	(procfs_insert_hw_watchpoint): Likewise.
	* p-lang.c (pascal_op_print_tab): Likewise.
	* ppc-linux-nat.c (ppc_linux_can_use_hw_breakpoint): Likewise.
	* ppc-linux-tdep.c (ppu2spu_unwind_register): Likewise.
	* ppc-sysv-tdep.c (get_decimal_float_return_value): Likewise.
	* procfs.c (procfs_can_use_hw_breakpoint): Likewise.
	(procfs_insert_watchpoint): Likewise.
	(procfs_remove_watchpoint): Likewise.
	* psymtab.c (recursively_search_psymtabs): Likewise.
	* remote-m32r-sdi.c (m32r_can_use_hw_watchpoint): Likewise.
	(m32r_insert_watchpoint): Likewise.
	* remote-mips.c (mips_can_use_watchpoint): Likewise.
	(mips_insert_watchpoint): Likewise.
	(mips_remove_watchpoint): Likewise.
	* remote.c (watchpoint_to_Z_packet): Likewise.
	(remote_insert_watchpoint): Likewise.
	(remote_remove_watchpoint): Likewise.
	(remote_check_watch_resources): Likewise.
	* s390-linux-nat.c (s390_insert_watchpoint): Likewise.
	(s390_remove_watchpoint): Likewise.
	(s390_can_use_hw_breakpoint): Likewise.
	* s390-linux-tdep.c (s390_gdbarch_init): Likewise.
	* spu-linux-nat.c (spu_can_use_hw_breakpoint): Likewise.
	* target.h (struct target_ops): Likewise.
	* tilegx-tdep.c (tilegx_analyze_prologue): Likewise.
	* ui-out.c (struct ui_out_hdr): Likewise.
	(append_header_to_list): Likewise.
	(get_next_header): Likewise.
	(verify_field): Likewise.
	(ui_out_begin): Likewise.
	(ui_out_field_int): Likewise.
	(ui_out_field_fmt_int): Likewise.
	(ui_out_field_skip): Likewise.
	(ui_out_field_string): Likewise.
	(ui_out_field_fmt): Likewise.
	* varobj.c (new_variable): Likewise.
	* x86-nat.c (x86_insert_watchpoint): Likewise.
	(x86_remove_watchpoint): Likewise.
	(x86_can_use_hw_breakpoint): Likewise.
	* xtensa-tdep.h (struct gdbarch_tdep): Likewise.
	* inflow.c (enum gdb_has_a_terminal_flag_enum): Add name to
	previously anonymous enumeration type..
	* linux-record.h (enum gdb_syscall): Add gdb_sys_no_syscall
	value.
	* target-debug.h (target_debug_print_enum_target_hw_bp_type): New.
	(target_debug_print_enum_bptype): New.
	* target-delegates.c: Regenerate.

2015-07-30  Sandra Loosemore  <sandra@codesourcery.com>

	* nios2-tdep.c (nios2_analyze_prologue): Do what the comment
	already says and disallow non-stack memory writes in the prologue.

2015-07-30  Sandra Loosemore  <sandra@codesourcery.com>

	* nios2-tdep.c (nios2_analyze_prologue): Update comments to
	reflect how current GCC emits stack overflow checks.  Match
	both trap and break instructions for backward compatbility.
	Disallow other trap and break instructions in the prologue.

2015-07-30  Pedro Alves  <palves@redhat.com>

	PR threads/18600
	* linux-nat.c (wait_lwp): Report to the core when thread group
	leader exits.

2015-07-30  Pedro Alves  <palves@redhat.com>
	    Simon Marchi  <simon.marchi@ericsson.com>

	PR threads/18600
	* linux-nat.c (linux_handle_extended_wait): On CLONE event, always
	mark the new thread as resumed.  Remove STOPPING parameter.
	(wait_lwp): Adjust call to linux_handle_extended_wait.
	(linux_nat_filter_event): Adjust call to
	linux_handle_extended_wait.
	(resume_stopped_resumed_lwps): Add debug output.

2015-07-30  Pierre Langlois  <pierre.langlois@arm.com>

	* arch-utils.c (default_fast_tracepoint_valid_at): Remove unused
	isize argument.
	* arch-utils.h (default_fast_tracepoint_valid_at): Likewise.
	* breakpoint.c (check_fast_tracepoint_sals): Adjust call to
	gdbarch_fast_tracepoint_valid_at.
	* gdbarch.sh (fast_tracepoint_valid_at): Remove isize argument.
	* gdbarch.h: Regenerate.
	* gdbarch.c: Regenerate.
	* i386-tdep.c (i386_fast_tracepoint_valid_at): Remove isize
	argument.  Do not set it.
	* remote.c (remote_download_tracepoint): Adjust call to
	gdbarch_fast_tracepoint_valid_at.  Call gdb_insn_length to get
	the instruction length.

2015-07-30  Yao Qi  <yao.qi@linaro.org>

	* arm-tdep.h (enum gdb_regnum): Move it to ...
	* arch/arm.h: ... here.  New file.
	* Makefile.in (HFILES_NO_SRCDIR): Add arch/arm.h.

2015-07-30  Pierre Langlois  <pierre.langlois@arm.com>

	* aarch64-tdep.c (decode_b): Rename link argument to is_bl.
	Change its type to int *.
	(decode_br): Rename link argument to is_blr.  Change its type to
	int *.
	(decode_cb): Rename op argument to is_cbnz.  Change its type to
	int *.
	(decode_tb): Rename op argument to is_tbnz.  Change its type to
	int *.  Set is_tbnz to either 1 or 0.
	(aarch64_analyze_prologue): Change type of is_link to int.  Add
	new variables is_cbnz and is_tbnz.  Adjust call to
	aarch64_decode_cb and aarch64_decode_tb.

2015-07-29  Simon Marchi  <simon.marchi@ericsson.com>

	* mips-linux-nat.c (write_watchpoint_regs): Add NULL as ptrace's 4th
	parameter.
	(mips_linux_new_thread): Likewise.
	* nat/mips-linux-watch.c (mips_linux_read_watch_registers): Likewise.

2015-07-29  Patrick Palka  <patrick@parcs.ath.cx>

	* top.c: Include "tui/tui.h".
	(undo_terminal_modifications_before_exit): New static function.
	(quit_force): Use it.

2015-07-29  Patrick Palka  <patrick@parcs.ath.cx>

	* target.c (terminal_state): Initialize to terminal_is_ours.

2015-07-29  Yao Qi  <yao.qi@linaro.org>

	PR record/18691
	* dcache.c (dcache_read_memory_partial): Call
	raw_memory_xfer_partial.
	* target.c (raw_memory_xfer_partial): Make it non-static.
	* target.h (raw_memory_xfer_partial): Declare.

2015-07-28  Simon Marchi  <simon.marchi@ericsson.com>

	* c-valprint.c (c_val_print_array): Consider addressable memory
	unit size.
	(c_val_print_ptr): Likewise.
	(c_val_print_int): Likewise.
	* findvar.c (read_frame_register_value): Likewise.
	* valarith.c (find_size_for_pointer_math): Likewise.
	(value_ptrdiff): Likewise.
	(value_subscripted_rvalue): Likewise.
	* valops.c (read_value_memory): Likewise (and rename variables).
	(value_assign): Likewise.
	(value_repeat): Likewise.
	(value_array): Likewise.
	(value_slice): Likewise.
	* valprint.c (generic_val_print_ptr): Likewise.
	(generic_val_print_enum): Likewise.
	(generic_val_print_bool): Likewise.
	(generic_val_print_int): Likewise.
	(generic_val_print_char): Likewise.
	(generic_val_print_float): Likewise.
	(generic_val_print_decfloat): Likewise.
	(generic_val_print_complex): Likewise.
	(val_print_scalar_formatted): Likewise.
	(val_print_array_elements): Likewise.
	* value.c (set_value_parent): Likewise.
	(value_contents_copy_raw): Likewise.
	(set_internalvar_component): Likewise.
	(value_primitive_field): Likewise.
	(value_fetch_lazy): Likewise.
	* value.h (read_value_memory): Update comment.

2015-07-28  Simon Marchi  <simon.marchi@ericsson.com>

	* value.c (get_value_arch): New function.
	* value.h (get_value_arch): New declaration.

2015-07-28  Simon Marchi  <simon.marchi@ericsson.com>

	* value.c (struct value): Update comments.

2015-07-28  Simon Marchi  <simon.marchi@ericsson.com>

	* gdbtypes.c (type_length_units): New function.
	* gdbtypes.h (type_length_units): New declaration.
	(struct type) <length>: Update comment.

2015-07-27  Simon Marchi  <simon.marchi@ericsson.com>

	* valprint.c (generic_val_print): Factor out complex
	printing code to ...
	(generic_val_print_complex): ... this new function.

2015-07-27  Simon Marchi  <simon.marchi@ericsson.com>

	* valprint.c (generic_val_print): Factor out decfloat
	printing code to ...
	(generic_val_print_decfloat): ... this new function.

2015-07-27  Simon Marchi  <simon.marchi@ericsson.com>

	* valprint.c (generic_val_print): Factor out float
	printing code to ...
	(generic_val_print_float): ... this new function.

2015-07-27  Simon Marchi  <simon.marchi@ericsson.com>

	* valprint.c (generic_val_print): Factor out char
	printing code to ...
	(generic_val_print_char): ... this new function.

2015-07-27  Simon Marchi  <simon.marchi@ericsson.com>

	* valprint.c (generic_val_print): Factor out integer
	printing code to ...
	(generic_val_print_int): ... this new function.

2015-07-27  Simon Marchi  <simon.marchi@ericsson.com>

	* valprint.c (generic_val_print): Factor out bool
	printing code to ...
	(generic_val_print_bool): ... this new function.

2015-07-27  Simon Marchi  <simon.marchi@ericsson.com>

	* valprint.c (generic_val_print): Factor out function/method
	printing code to ...
	(generic_val_print_func): ... this new function.

2015-07-27  Simon Marchi  <simon.marchi@ericsson.com>

	* valprint.c (generic_val_print): Factor out flags
	printing code to ...
	(generic_val_print_flags): ... this new function.

2015-07-27  Simon Marchi  <simon.marchi@ericsson.com>

	* valprint.c (generic_val_print): Factor out enum
	printing code to ...
	(generic_val_print_enum): ... this new function.

2015-07-27  Simon Marchi  <simon.marchi@ericsson.com>

	* valprint.c (generic_val_print): Factor out reference
	printing code to ...
	(generic_val_print_ref): ... this new function.

2015-07-27  Simon Marchi  <simon.marchi@ericsson.com>

	* valprint.c (generic_val_print): Factor out memberptr
	printing code to ...
	(generic_val_print_memberptr): ... this new function.

2015-07-27  Simon Marchi  <simon.marchi@ericsson.com>

	* valprint.c (generic_val_print): Factor out pointer
	printing code to ...
	(generic_val_print_ptr): ... this new function.

2015-07-27  Simon Marchi  <simon.marchi@ericsson.com>

	* valprint.c (generic_val_print): Factor out array
	printing code to ...
	(generic_val_print_array): ... this new function.

2015-07-27  Simon Marchi  <simon.marchi@ericsson.com>

	* valprint.c (generic_val_print): Factor out
	print_unpacked_pointer code to ...
	(print_unpacked_pointer): ... this new function.

2015-07-27  Patrick Palka  <patrick@parcs.ath.cx>

	* event-top.c (handle_sigterm): Don't inspect
	target_can_async_p.  Always set the quit flag and always mark
	the async signal handler.

2015-07-27  Yao Qi  <yao.qi@linaro.org>

	* Makefile.in (REMOTE_EXAMPLES): Remove it.

2015-07-25  Kevin Buettner  <kevinb@redhat.com>

	* remote.c (read_ptid): Return null_ptid when no thread id
	is found.
	(remote_current_thread): Add log warning for malformed
	qC reply.
	(remote_start_remote): Add log warning when current thread
	not found.

2015-07-24  Pedro Alves  <palves@redhat.com>

	* s390-linux-nat.c (fetch_regs, store_regs, fetch_fpregs)
	(s390_stopped_by_watchpoint, s390_prepare_to_resume): Pass 0 as
	forth argument to ptrace PTRACE_PEEKUSR_AREA/PTRACE_POKEUSR_AREA.

2015-07-24  Pedro Alves  <palves@redhat.com>

	PR gdb/18717
	* linux-nat.c (linux_nat_filter_event): Don't assert that the lwp
	is resumed, and extend the debug log.

2015-07-24  Pedro Alves  <palves@redhat.com>

	* fork-child.c (fork_inferior): Print argv[0] instead of exec_file.

2015-07-24  Pedro Alves  <palves@redhat.com>

	* aarch64-linux-nat.c: Include nat/gdb_ptrace.h instead of
	sys/ptrace.h.
	* alpha-linux-nat.c: Likewise.
	* amd64-linux-nat.c: Likewise.
	* arm-linux-nat.c: Likewise.
	* hppa-linux-nat.c: Likewise.
	* i386-linux-nat.c: Likewise.
	* ia64-linux-nat.c: Likewise.
	* linux-fork.c: Likewise.
	* linux-nat.c: Likewise.
	* m32r-linux-nat.c: Likewise.
	* m68klinux-nat.c: Likewise.
	* mips-linux-nat.c: Likewise.
	* nat/linux-btrace.c: Likewise.
	* nat/linux-ptrace.c: Likewise.
	* nat/linux-ptrace.h
	* nat/mips-linux-watch.c: Likewise.
	* nat/x86-linux-dregs.c: Likewise.
	* ppc-linux-nat.c: Likewise.
	* s390-linux-nat.c: Likewise.
	* spu-linux-nat.c: Likewise.
	* tilegx-linux-nat.c: Likewise.
	* x86-linux-nat.c: Likewise.
	* xtensa-linux-nat.c: Likewise.

2015-07-24  Pedro Alves  <palves@redhat.com>

	* ptrace.m4 (ptrace tests): Test in C++ mode.  Try with 'enum
	__ptrace_request as first parameter type instead of int.
	(PTRACE_TYPE_ARG1): Define.
	* nat/gdb_ptrace.h [!PTRACE_TYPE_ARG5] (ptrace): Define as wrapper
	that casts first argument to PTRACE_TYPE_ARG1.
	* config.in: Regenerate.
	* configure: Regenerate.

2015-07-24  Pedro Alves  <palves@redhat.com>

	* gdb_ptrace.h: Move ...
	* nat/gdb_ptrace.h: ... here.
	* inf-ptrace.c: Adjust.

2015-07-24  Pedro Alves  <palves@redhat.com>

	* acinclude.m4: Include ptrace.m4.
	* configure.ac: Call GDB_AC_PTRACE and move ptrace checks ...
	* ptrace.m4: ... to this new file.

2015-07-23  Doug Evans  <dje@google.com>

	* dwarf2read.c (dwarf2_per_cu_data): Add comment.
	(load_cu): Handle dummy CUs.
	(dw2_do_instantiate_symtab, process_queuef): Ditto.
	(dwarf2_fetch_die_loc_sect_off, dwarf2_fetch_constant_bytes): Ditto.

2015-07-23  Ciro Santilli  <ciro.santilli@gmail.com>  (tiny patch)

	* py-linetable.c (ltpy_get_all_source_lines): Adjust function
	documentation to say that it returns a list rather than
	a FrozenSet.
	(linetable_object_methods): Update the docstring of the
	"source_line" entry.

2015-07-23  Pierre-Marie de Rodat  <derodat@adacore.com>

	* gdbtypes.c (resolve_dynamic_array): Pass the peeled element
	type to the recursive call instead of the original (maybe
	TYPE_CODE_TYPEDEF) type.

2015-07-23  Yao Qi  <yao.qi@linaro.org>

	* aarch64-linux-nat.c (aarch64_linux_can_use_hw_breakpoint): If
	TYPE is watchpoint, return zero if aarch64_num_wp_regs is zero.
	If TYPE is breakpoint, return zero if arch64_num_bp_regs is zero.

2015-07-21  Yao Qi  <yao.qi@linaro.org>

	* aarch64-linux-nat.c (aarch64_linux_get_debug_reg_capacity):
	Move it to nat/aarch64-linux-hw-point.c.
	(aarch64_linux_child_post_startup_inferior): Update.
	* nat/aarch64-linux-hw-point.c (aarch64_linux_get_debug_reg_capacity):
	New function.
	* nat/aarch64-linux-hw-point.h (aarch64_linux_get_debug_reg_capacity):
	Declare it.

2015-07-21  Markus Metzger  <markus.t.metzger@intel.com>

	* common/btrace-common.c (btrace_data_append): Change case label.

2015-07-20  Yao Qi  <yao.qi@linaro.org>

	* nat/aarch64-linux-hw-point.c (aarch64_handle_unaligned_watchpoint):
	Re-indent the code.
	* nat/aarch64-linux-hw-point.h: Use ULONGEST rather than
	"unsigned long long".

2015-07-18  Kevin Buettner  <kevinb@redhat.com>

	* dwarf2read.c (dwarf2_locate_sections): Allow has_section_at_zero
	to be set for SEC_ALLOC sections too.

2015-07-17  Yao Qi  <yao.qi@linaro.org>

	* Makefile.in (HFILES_NO_SRCDIR): Add
	nat/aarch64-linux-hw-point.h.
	(aarch64-linux-hw-point.o): New rule.
	* nat/aarch64-linux-hw-point.h: New file.
	* nat/aarch64-linux-hw-point.c: New file.
	* aarch64-linux-nat.c: Include nat/aarch64-linux-hw-point.h.
	(AARCH64_HBP_MAX_NUM): Move to nat/aarch64-linux-hw-point.h.
	(AARCH64_HWP_MAX_NUM, AARCH64_HBP_ALIGNMENT): Likewise.
	(AARCH64_HWP_ALIGNMENT): Likewise.
	(AARCH64_HWP_MAX_LEN_PER_REG): Likewise.
	(AARCH64_DEBUG_NUM_SLOTS, AARCH64_DEBUG_ARCH): Likewise.
	(AARCH64_DEBUG_ARCH_V8, DR_MARK_ALL_CHANGED): Likewise.
	(DR_MARK_N_CHANGED, DR_CLEAR_CHANGED): Likewise.
	(DR_HAS_CHANGED, DR_N_HAS_CHANGE): Likewise.
	(aarch64_num_bp_regs, aarch64_num_wp_regs): Likewise.
	(struct aarch64_debug_reg_state): Likewise.
	(struct arch_lwp_info):	Likewise.
	(aarch64_linux_set_debug_regs): Likewise.
	(aarch64_notify_debug_reg_change): Remove static.
	(aarch64_align_watchpoint): Likewise.
	(DR_CONTROL_ENABLED, DR_CONTROL_LENGTH): Likewise.
	(aarch64_watchpoint_length): Likewise.
	(aarch64_point_encode_ctrl_reg): Likewise
	(aarch64_point_is_aligned): Likewise.
	(aarch64_dr_state_insert_one_point): Likewise.
	(aarch64_dr_state_remove_one_point): Likewise.
	(aarch64_handle_breakpoint): Likewise.
	(aarch64_handle_aligned_watchpoint): Likewise.
	(aarch64_handle_unaligned_watchpoint): Likewise.
	(aarch64_handle_watchpoint): Likewise.
	* config/aarch64/linux.mh (NAT_FILE): Add
	aarch64-linux-hw-point.o.

2015-07-17  Yao Qi  <yao.qi@linaro.org>

	* aarch64-linux-nat.c (aarch64_handle_breakpoint): Add argument
	state and don't call aarch64_get_debug_reg_state.  All callers
	update.
	(aarch64_linux_insert_hw_breakpoint): Call
	aarch64_get_debug_reg_state earlier.
	(aarch64_linux_remove_hw_breakpoint): Likewise.
	(aarch64_handle_aligned_watchpoint): Add argument state and
	don't call aarch64_get_debug_reg_state.  All callers update.
	(aarch64_handle_unaligned_watchpoint): Likewise.
	(aarch64_handle_watchpoint): Add argument state.
	(aarch64_linux_insert_watchpoint): Call aarch64_get_debug_reg_state
	earlier.
	(aarch64_linux_remove_watchpoint): Likewise.

2015-07-17  Yao Qi  <yao.qi@linaro.org>

	* aarch64-linux-nat.c (aarch64_show_debug_reg_state): Use
	debug_printf.
	(aarch64_handle_unaligned_watchpoint): Likewise.

2015-07-17  Yao Qi  <yao.qi@linaro.org>

	* aarch64-linux-nat.c (aarch64_dr_state_insert_one_point): Change
	argument type's type to 'enum target_hw_bp_type'.
	(aarch64_dr_state_remove_one_point): Likewise.
	(aarch64_handle_breakpoint): Likewise.
	(aarch64_linux_insert_hw_breakpoint): Likewise.
	(aarch64_linux_remove_hw_breakpoint): Likewise.
	(aarch64_handle_aligned_watchpoint): Likewise.

2015-07-17  Yao Qi  <yao.qi@linaro.org>

	* aarch64-linux-nat.c (aarch64_linux_get_debug_reg_capacity): Call
	ptid_get_pid instead of get_thread_id.

2015-07-17  Yao Qi  <yao.qi@linaro.org>

	* remote.c (get_current_thread): Initialise ptid to null_ptid.
	(add_current_inferior_and_thread): Don't initialise ptid.

2015-07-16  Pierre Langlois  <pierre.langlois@arm.com>

	* aarch64-tdep.c (aarch64_pseudo_read_value): Mark S register as
	unavailable if invalid.

2015-07-15  Jan Kratochvil  <jan.kratochvil@redhat.com>

	Revert the previous 6 commits:
	Create empty nat/linux-maps.[ch] and common/target-utils.[ch].
	Move gdb_regex* to common/
	Prepare linux_find_memory_regions_full & co. for move
	Move linux_find_memory_regions_full & co.
	gdbserver build-id attribute generator
	Validate symbol file using build-id

2015-07-15  Aleksandar Ristovski  <aristovski@qnx.com
	    Jan Kratochvil  <jan.kratochvil@redhat.com>

	Validate symbol file using build-id.
	* NEWS (Changes since GDB 7.10): Add 'set validate-build-id'
	and 'show validate-build-id'.  Add build-id attribute.
	* solib-darwin.c (_initialize_darwin_solib): Assign validate value.
	* solib-dsbt.c (_initialize_dsbt_solib): Ditto.
	* solib-frv.c (_initialize_frv_solib): Ditto.
	* solib-spu.c (set_spu_solib_ops): Ditto.
	* solib-svr4.c: Include rsp-low.h.
	(NOTE_GNU_BUILD_ID_NAME): New define.
	(svr4_validate): New function.
	(svr4_copy_library_list): Duplicate field build_id.
	(library_list_start_library): Parse 'build-id' attribute.
	(svr4_library_attributes): Add 'build-id' attribute.
	(_initialize_svr4_solib): Assign validate value.
	* solib-target.c (solib.h): Include.
	(_initialize_solib_target): Assign validate value.
	* solib.c (validate_build_id, show_validate_build_id): New.
	(solib_map_sections): Use ops->validate.
	(clear_so): Free build_id.
	(default_solib_validate): New function.
	(_initialize_solib): Add "validate-build-id".
	* solib.h (default_solib_validate): New declaration.
	* solist.h (struct so_list): New fields 'build_idsz' and 'build_id'.
	(target_so_ops): New field 'validate'.

2015-07-15  Aleksandar Ristovski  <aristovski@qnx.com
	    Jan Kratochvil  <jan.kratochvil@redhat.com>

	gdbserver build-id attribute generator.
	* features/library-list-svr4.dtd (library-list-svr4): New
	'build-id' attribute.

2015-07-15  Aleksandar Ristovski  <aristovski@qnx.com
	    Jan Kratochvil  <jan.kratochvil@redhat.com>

	Move linux_find_memory_regions_full & co.
	* linux-tdep.c (nat/linux-maps.h): Include.
	(gdb_regex.h): Remove the include.
	(enum filterflags, struct smaps_vmflags, read_mapping, decode_vmflags)
	(mapping_is_anonymous_p, dump_mapping_p): Moved to nat/linux-maps.c.
	(linux_find_memory_region_ftype): Moved typedef to nat/linux-maps.h.
	(linux_find_memory_regions_full): Moved definition to nat/linux-maps.c.
	* nat/linux-maps.c: Include ctype.h, target/target-utils.h, gdb_regex.h
	and target/target.h.
	(struct smaps_vmflags, read_mapping, decode_vmflags)
	(mapping_is_anonymous_p, dump_mapping_p): Move from linux-tdep.c.
	(linux_find_memory_regions_full): Move from linux-tdep.c.
	* nat/linux-maps.h (read_mapping): New declaration.
	(linux_find_memory_region_ftype, enum filterflags): Moved from
	linux-tdep.c.
	(linux_find_memory_regions_full): New declaration.
	* target.c (target/target-utils.h): Include.
	(read_alloc_pread_ftype): Moved typedef to target/target-utils.h.
	(read_alloc, read_stralloc_func_ftype, read_stralloc): Moved
	definitions to target/target-utils.c.
	* target.h (target_fileio_read_stralloc): Move it to target/target.h.
	* target/target-utils.c (read_alloc, read_stralloc): Move definitions
	from target.c.
	* target/target-utils.h (read_alloc_pread_ftype): New typedef.
	(read_alloc): New declaration.
	(read_stralloc_func_ftype): New typedef.
	(read_stralloc): New declaration.
	* target/target.h (target_fileio_read_stralloc): Move it from target.h.

2015-07-15  Aleksandar Ristovski  <aristovski@qnx.com
	    Jan Kratochvil  <jan.kratochvil@redhat.com>

	Prepare linux_find_memory_regions_full & co. for move.
	* linux-tdep.c (linux_find_memory_region_ftype): Comment.
	(linux_find_memory_regions_full): Change signature and prepare
	for moving to linux-maps.
	(linux_find_memory_regions_data): Rename field 'obfd' to 'data'.
	(linux_find_memory_regions_thunk): New.
	(linux_find_memory_regions_thunk): Use 'data' field instead of 'obfd'.
	(linux_find_memory_regions_gdb): New.
	(linux_find_memory_regions): Rename argument 'obfd' to 'func_data'.
	(linux_make_mappings_corefile_notes): Use
	linux_find_memory_regions_gdb.
	* target.c (read_alloc_pread_ftype): New typedef.
	(target_fileio_read_alloc_1_pread): New function.
	(read_alloc): Refactor from target_fileio_read_alloc_1.
	(read_stralloc_func_ftype): New typedef.
	(target_fileio_read_alloc_1): New implementation. Use read_alloc.
	(read_stralloc): Refactored from target_fileio_read_stralloc.
	(target_fileio_read_stralloc): New implementation, use read_stralloc.

2015-07-15  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* Makefile.in (HFILES_NO_SRCDIR): Change gdb_regex.h to
	common/gdb_regex.h.
	(COMMON_OBS): Add gdb_regex.o.
	(gdb_regex.o): New.
	* common/common.m4 (GDB_AC_COMMON): Add gdb_use_included_regex,
	--without-included-regex and USE_INCLUDED_REGEX.
	* common/gdb_regex.c: New file from utils.c functions.
	* common/gdb_regex.h: Move it here from gdb_regex.h, update include
	file wrapping define name.
	* configure: Rebuilt.
	* configure.ac (gdb_use_included_regex, --without-included-regex)
	(USE_INCLUDED_REGEX): Move them to common/common.m4.
	* gdb_regex.h: Move it to common/gdb_regex.h.
	* utils.c: Remove include gdb_regex.h.
	(do_regfree_cleanup, make_regfree_cleanup, get_regcomp_error)
	(compile_rx_or_error): Move them to common/gdb_regex.c.

2015-07-15  Aleksandar Ristovski  <aristovski@qnx.com
	    Jan Kratochvil  <jan.kratochvil@redhat.com>

	Create empty nat/linux-maps.[ch] and common/target-utils.[ch].
	* Makefile.in (HFILES_NO_SRCDIR); Add nat/linux-maps.h,
	common/target-utils.h.
	(COMMON_OBS): Add target-utils.o.
	(linux-maps.o, target-utils.o): New.
	* target/target-utils.c: New file.
	* target/target-utils.h: New file.
	* config/i386/linux.mh (NATDEPFILES): Add linux-maps.o.
	* config/i386/linux64.mh (NATDEPFILES): Ditto.
	* nat/linux-maps.c: New file.
	* nat/linux-maps.h: New file.

2015-07-15  Markus Metzger  <markus.t.metzger@intel.com>
	    Pedro Alves <palves@redhat.com>

	* nat/linux-btrace.c (perf_event_read): Change the type of DATA_HEAD.
	(perf_event_read_all): Change the type of SIZE and DATA_HEAD.
	(perf_event_read_bts): Change the type of SIZE and READ.
	(linux_enable_bts): Change the type of SIZE, PAGES, DATA_SIZE,
	and DATA_OFFSET.  Move DATA_SIZE declaration.  Restrict the buffer size
	to UINT_MAX.  Check for overflows when using DATA_HEAD from the perf
	mmap page.
	(linux_enable_pt): Change the type of PAGES and SIZE.  Restrict the
	buffer size to UINT_MAX.
	(linux_read_bts): Change the type of BUFFER_SIZE, SIZE, DATA_HEAD, and
	DATA_TAIL.
	* nat/linux-btrace.h (struct perf_event_buffer)<size, data_head>
	<last_head>: Change type.
	* common/btrace-common.h (struct btrace_dat_pt) <size>: Change type.
	* common/btrace-common.c (btrace_data_append): Change the type of
	SIZE.
	* btrace.c (parse_xml_raw): Change the type of SIZE.  Change oddness
	check.

2015-07-14  Simon Marchi  <simon.marchi@ericsson.com>

	* gdbtypes.h (CHECK_TYPEDEF): Remove.
	* aarch64-tdep.c (aarch64_return_in_memory): Replace CHECK_TYPEDEF
	with check_typedef.
	* ada-lang.c (decode_constrained_packed_array_type): Likewise.
	(ada_array_length): Likewise.
	(find_parallel_type_by_descriptive_type): Likewise.
	(ada_check_typedef): Likewise.
	* arm-tdep.c (arm_return_in_memory): Likewise.
	* ax-gdb.c (gen_trace_static_fields): Likewise.
	(gen_struct_ref_recursive): Likewise.
	* c-exp.y (exp : SIZEOF '(' type ')' %prec UNARY): Likewise.
	(variable: block COLONCOLON name): Likewise.
	(qualified_name: TYPENAME COLONCOLON name): Likewise.
	* c-lang.c (classify_type): Likewise.
	* c-typeprint.c (c_print_type): Likewise.
	(c_print_typedef): Likewise.
	(c_type_print_base): Likewise.
	* c-valprint.c (c_val_print): Likewise.
	* compile/compile-c-types.c (convert_type): Likewise.
	* compile/compile-object-load.c (get_out_value_type): Likewise.
	* completer.c (add_struct_fields): Likewise.
	(expression_completer): Likewise.
	* cp-namespace.c (cp_find_type_baseclass_by_name): Likewise.
	(cp_lookup_nested_symbol_1): Likewise.
	(cp_lookup_nested_symbol): Likewise.
	* cp-valprint.c (cp_print_value_fields): Likewise.
	(cp_print_static_field): Likewise.
	* d-valprint.c (d_val_print): Likewise.
	* eval.c (evaluate_subexp_standard): Likewise.
	(evaluate_subexp_for_sizeof): Likewise.
	* f-exp.y (exp : SIZEOF '(' type ')' %prec UNARY): Likewise.
	* f-typeprint.c (f_type_print_base): Likewise.
	* f-valprint.c (f_val_print): Likewise.
	* gdbtypes.c (get_discrete_bounds): Likewise.
	(create_array_type_with_stride): Likewise.
	(type_name_no_tag_or_error): Likewise.
	(lookup_struct_elt_type): Likewise.
	(get_unsigned_type_max): Likewise.
	(internal_type_vptr_fieldno): Likewise.
	(set_type_vptr_fieldno): Likewise.
	(internal_type_vptr_basetype): Likewise.
	(set_type_vptr_basetype): Likewise.
	(get_vptr_fieldno): Likewise.
	(is_integral_type): Likewise.
	(is_scalar_type): Likewise.
	(is_scalar_type_recursive): Likewise.
	(distance_to_ancestor): Likewise.
	(is_unique_ancestor_worker): Likewise.
	(check_types_equal): Likewise.
	* gnu-v2-abi.c (gnuv2_value_rtti_type): Likewise.

2015-07-14  Iain Buclaw  <ibuclaw@gdcproject.org>

	* dwarf2read.c (find_slot_in_mapped_hash): Extend language support to
	also test for language_d.
	(dwarf2_compute_name): Likewise.
	(read_func_scope): Likewise.
	(read_structure_type): Likewise.
	(new_symbol_full): Likewise.
	(determine_prefix): Likewise.
	(read_import_statement): Use dot as the separator for language_d.
	(typename_concat): Likewise, but don't prefix the D main function.

2015-07-14  Peter Bergner  <bergner@vnet.ibm.com>

	* nat/linux-namespaces.c (setns): Rename from this ...
	(do_setns): ... to this.  Support calling setns if it exists.
	(mnsh_handle_setns): Call do_setns.

2015-07-13  Yao Qi  <yao.qi@linaro.org>

	* exec.c (exec_file_attach): Add period at the end of error
	message.

2015-07-13  Andrew Burgess  <andrew.burgess@embecosm.com>

	* tui/tui-win.c (window_name_completer): New function.
	(focus_completer): Call window_name_completer.  All old content
	moved into window_name_completer.
	(winheight_completer): New function.
	(_initialize_tui_win): Rename variable.  Add completer to
	winheight command.  Update doc string on winheight.

2015-07-12  Sandra Loosemore  <sandra@codesourcery.com>

	* nios2-linux-tdep.c (_initialize_nios2_linux_tdep): Register
	all nios2 mach variants.

2015-07-10  Kevin Buettner  <kevinb@redhat.com>

	* rx-tdep.c (rx_get_opcode_byte): Use target_read_code instead
	of target_read_memory.

2015-07-10  Andrew Burgess  <andrew.burgess@embecosm.com>

	* tui/tui-win.c (tui_set_win_height): Use a cleanup to free the
	string copy.
	(parse_scrolling_args): Likewise.

2015-07-10  Andrew Burgess  <andrew.burgess@embecosm.com>

	* tui/tui-win.c (focus_completer): Don't duplicate the tui window
	names in this function.

2015-07-10  Andrew Burgess  <andrew.burgess@embecosm.com>

	* tui/tui-data.h (SRC_NAME): Convert to lower case.
	(CMD_NAME): Likewise.
	(DATA_NAME): Likewise.
	(DISASSEM_NAME): Likewise.
	* tui/tui-win.c (tui_set_focus): Window names are now lower case.
	(tui_set_win_height): Likewise.
	(parse_scrolling_args): Likewise.

2015-07-10  Markus Metzger  <markus.t.metzger@intel.com>

	* record-btrace.c (record_btrace_goto_begin)
	(record_btrace_goto_end, record_btrace_goto): Move call to
	print_stack_frame ...
	(record_btrace_set_replay): ... here.  Set stop_pc.
	* record-full.c (record_full_goto_entry): Set stop_pc.

2015-07-09  Pierre Langlois  <pierre.langlois@arm.com>

	* NEWS: Mention support for tracepoints on aarch64-linux.

2015-07-09  Pierre Langlois  <pierre.langlois@arm.com>

	* linux-aarch64-low.c (aarch64_supports_tracepoints): New
	function.  Return 1.
	(the_low_target): Install it.

2015-07-09  Pierre Langlois  <pierre.langlois@arm.com>

	* gdb.trace/backtrace.exp: Set registers for aarch64 target.
	* gdb.trace/collection.exp: Likewise.
	* gdb.trace/mi-trace-frame-collected.exp: Likewise.
	* gdb.trace/mi-trace-unavailable.exp: Likewise.
	* gdb.trace/report.exp: Likewise.
	* gdb.trace/trace-break.exp: Likewise.
	* gdb.trace/unavailable.exp: Likewise.
	* gdb.trace/while-dyn.exp: Likewise.

2015-07-09  Pierre Langlois  <pierre.langlois@arm.com>

	* aarch64-tdep.c: Add ax.h and ax-gdb.h includes.
	(aarch64_gen_return_address): New function.
	(aarch64_gdbarch_init): Hook it.

2015-07-09  Pierre Langlois  <pierre.langlois@arm.com>

	* aarch64-tdep.c (aarch64_make_stub_cache): Set available_p and
	swallow NOT_AVAILABLE_ERROR.
	(aarch64_stub_this_id): Call frame_id_build_unavailable_stack if
	available_p is not set.
	(aarch64_stub_frame_unwind_stop_reason): New function.
	(aarch64_stub_unwind): Install it.

2015-07-09  Pierre Langlois  <pierre.langlois@arm.com>

	* aarch64-tdep.c (aarch64_prologue_cache) <available_p>: New
	field.
	(aarch64_make_prologue_cache_1): New function, factored out from
	aarch64_make_prologue_cache.  Do not allocate cache.  Set
	available_p.
	(aarch64_make_prologue_cache): Reimplement wrapping
	aarch64_make_prologue_cache_1, and swallowing
	NOT_AVAILABLE_ERROR.
	(aarch64_prologue_frame_unwind_stop_reason): New function.
	Return UNWIND_UNAVAILABLE if available_p is not set.
	(aarch64_prologue_unwind): Install it.
	(aarch64_prologue_this_id): Move prev_pc and prev_sp limit
	checks into aarch64_prologue_frame_unwind_stop_reason.  Call
	frame_id_build_unavailable_stack if available_p is not set.

2015-07-09  Pierre Langlois  <pierre.langlois@arm.com>

	* aarch64-tdep.c (aarch64_prologue_cache) <func, prev_pc>: New
	fields.
	(aarch64_scan_prologue): Set prev_pc.
	(aarch64_make_prologue_cache): Set func.
	(aarch64_make_stub_cache): Set prev_pc.
	(aarch64_prologue_this_id): Remove local variables id, pc and
	func.  Read prev_pc and func from cache.
	(aarch64_stub_this_id): Read prev_pc from cache.

2015-07-09  Pierre Langlois  <pierre.langlois@arm.com>

	* aarch64-tdep.c (aarch64_make_stub_cache): Update comment.  New
	argument this_cache.  Remove unused local variables reg and
	unwound_fp.  Return early if this_cache is already set.  Set
	this_cache.
	(aarch64_stub_this_id): Update call to aarch64_make_stub_cache.

2015-07-09  Pierre Langlois  <pierre.langlois@arm.com>

	* aarch64-tdep.c (aarch64_make_prologue_cache): Update comment.
	New argument this_cache.  Return early if this_cache is already
	set.  Set this_cache.
	(aarch64_prologue_this_id): Update call to
	aarch64_make_prologue_cache.
	(aarch64_prologue_prev_register): Likewise.
	(aarch64_normal_frame_base): Likewise.

2015-07-09  Simon Marchi  <simon.marchi@ericsson.com>

	* c-valprint.c (c_val_print): Factor out memberptr printing code
	from c_val_print to ...
	(c_val_print_memberptr): ... this new function.

2015-07-09  Simon Marchi  <simon.marchi@ericsson.com>

	* c-valprint.c (c_val_print): Factor out int printing code to ...
	(c_val_print_int): ... this new function.

2015-07-09  Simon Marchi  <simon.marchi@ericsson.com>

	* c-valprint.c (c_val_print): Factor out struct and union
	printing code to ...
	(c_val_print_struct): ... this new function ...
	(c_val_print_union): ... and this new function.

2015-07-09  Simon Marchi  <simon.marchi@ericsson.com>

	* c-valprint.c (c_val_print): Factor out pointer printing code
	to ...
	(c_val_print_ptr): ... this new function.

2015-07-09  Simon Marchi  <simon.marchi@ericsson.com>

	* c-valprint.c (c_valprint): Factor our array printing code from
	c_val_print to ...
	(c_val_print_array): ... this new function.

2015-07-09  Simon Marchi  <simon.marchi@ericsson.com>

	* c-valprint.c (c_val_print): Factor out pointer printing code
	to ...
	(print_unpacked_pointer): ... this new function.

2015-07-09  Simon Marchi  <simon.marchi@ericsson.com>

	* c-valprint.c (c_val_print): Remove an assignment to i and move
	its declaration.

2015-07-09  Yao Qi  <yao.qi@linaro.org>

	* aarch64-linux-nat.c (aarch64_linux_get_debug_reg_capacity): Add
	argument ptid.  Update comments.  Caller update.

2015-07-09  Markus Metzger  <markus.t.metzger@intel.com>

	* btrace.c (pt_print_packet): Print stop, vmcs, tma, mtc, cyc, and
	mnt packets.

2015-07-09  Markus Metzger  <markus.t.metzger@intel.com>

	* btrace.c (btrace_pt_readmem_callback): Change type of PC argument.

2015-07-08  Simon Marchi  <simon.marchi@ericsson.com>

	* progspace.c (delete_program_space): Add missing spaces.

2015-07-08  Simon Marchi  <simon.marchi@ericsson.com>

	* inferior.c (delete_inferior_1): Rename to ...
	(delete_inferior): ..., remove 'silent' parameter, delete
	program space when unused and remove call to prune_program_spaces.
	Remove the old, unused, delete_inferior.
	(delete_inferior_silent): Remove.
	(prune_inferiors): Change call from delete_inferior_1 to
	delete_inferior and remove 'silent' parameter. Remove call to
	prune_program_spaces.
	(remove_inferior_command): Idem.
	* inferior.h (delete_inferior_1): Rename to...
	(delete_inferior): ..., remove 'silent' parameter and remove the
	original delete_inferior.
	(delete_inferior_silent): Remove.
	* mi/mi-main.c (mi_cmd_remove_inferior): Change call from
	delete_inferior_1 to delete_inferior and remove 'silent'
	parameter.
	* progspace.c (prune_program_spaces): Remove.
	(pspace_empty_p): Rename to...
	(program_space_empty_p): ... and make non-static.
	(delete_program_space): New.
	* progspace.h (prune_program_spaces): Remove declaration.
	(program_space_empty_p): New declaration.
	(delete_program_space): New declaration.
	* monitor.c (monitor_close): Replace call to
	delete_thread_silent and delete_inferior_silent with
	discard_all_inferiors.

2015-07-08  Patrick Palka  <patrick@parcs.ath.cx>

	* defs.h (deprecated_register_changed_hook): Remove prototype.
	* interps.c (clear_iterpreter_hooks): Remove reference to
	deprecated_register_changed_hook.
	* top.c (deprecated_register_changed_hook): Remove prototype.
	* valops.c (value_assign): Remove reference to
	deprecated_register_changed_hook.
	* tui/tui-hooks.c (tui_register_changed): Add parameter "frame".
	Add comment documenting the function.
	(tui_register_changed_observer): Define.
	(tui_install_hooks): Remove reference to
	deprecated_register_changed_hook.  Set
	tui_register_changed_observer.
	(tui_remove_hooks): Remove reference to
	deprecated_register_changed_hook.  Unset
	tui_register_changed_observer.

2015-07-08  Jan Kratochvil  <jan.kratochvil@redhat.com>

	PR compile/18484
	* compile/compile-c-types.c (insert_type): Change gdb_assert to error.

2015-07-08  Robert O'Callahan  <robert@ocallahan.org>

	PR exp/18617
	* ax-gdb.c (gen_conversion): Extend to 'to' bits, not 'from'.

2015-07-08  Markus Metzger  <markus.t.metzger@intel.com>

	* MAINTAINERS (Write After Approval): Add Markus T. Metzger.

2015-07-08  Markus Metzger  <markus.t.metzger@intel.com>

	* nat/linux-btrace.c (kernel_supports_bts, kernel_supports_pt):
	Use safe_strerror() instead of strerror().

2015-07-07  Yao Qi  <yao.qi@linaro.org>

	* features/arm-with-m-fpa-layout.xml: Set architecture to arm.
	* features/arm-with-m-fpa-layout.c: Regenerated.
	* features/arm-with-m-vfp-d16.xml: Likewise.
	* features/arm-with-m-vfp-d16.c: Regenerated.
	* features/arm-with-m.xml: Likewise.
	* features/arm-with-m.c: Regenerated.
	* features/arm-with-neon.xml: Likewise.
	* features/arm-with-neon.c: Regenerated.
	* features/arm-with-vfpv2.xml: Likewise.
	* features/arm-with-vfpv2.c: Regenerated.
	* features/arm-with-vfpv3.xml: Likewise.
	* features/arm-with-vfpv3.c: Regenerated.

2015-07-07  Yao Qi  <yao.qi@linaro.org>

	* aarch32-linux-nat.h (VFP_REGS_SIZE): New macro, moved from
	arm-linux-nat.c.
	* aarch64-linux-nat.c: Include aarch32-linux-nat.h and
	elf/external.h.
	(fetch_gregs_from_thread): Call aarch32_gp_regcache_supply
	if target is 32-bit.
	(store_gregs_to_thread): Call aarch32_gp_regcache_collect
	if target is 32-bit.
	(fetch_fpregs_from_thread): Call aarch32_vfp_regcache_supply
	if target is 32-bit.
	(store_fpregs_to_thread): Call aarch32_vfp_regcache_collect
	if target is 32-bit.
	(tdesc_arm_with_vfpv3, tdesc_arm_with_neon): Declare.
	(aarch64_linux_read_description): Return the right target
	description.
	* arm-linux-nat.c (VFP_REGS_SIZE): Moved to aarch32-linux-nat.h.
	* config/aarch64/linux.mh (NATDEPFILES): Add aarch32-linux-nat.o.
	* configure.tgt (aarch64*-*-linux*): Add arm-tdep.o and
	arm-linux-tdep.o.

2015-07-07  Yao Qi  <yao.qi@linaro.org>

	* aarch32-linux-nat.c: New file.
	* aarch32-linux-nat.h: New file.
	* arm-linux-nat.c: Include aarch32-linux-nat.h.
	(fetch_regs): Move code to aarch32-linux-nat.c.  Call
	aarch32_gp_regcache_supply.
	(store_regs): Move code to aarch32-linux-nat.c.  Call
	aarch32_gp_regcache_collect.
	(fetch_vfp_regs): Move code to aarch32-linux-nat.c.  Call
	aarch32_vfp_regcache_supply.
	(store_vfp_regs): Move code to aarch32-linux-nat.c.  Call
	aarch32_vfp_regcache_collect.
	* config/arm/linux.mh (NATDEPFILES): Add aarch32-linux-nat.o.

2015-07-07  Yao Qi  <yao.qi@linaro.org>

	* arm-linux-nat.c (store_fpregister): Remove.
	(store_register): Likewise.
	(fetch_fpregister): Likewise.
	(fetch_register): Likewise.
	(arm_linux_store_inferior_registers): Call store_regs and
	store_fpregs instead.
	(arm_linux_fetch_inferior_registers): Call fetch_fpregs and
	fetch_regs instead.

2015-07-06  Andrew Burgess  <andrew.burgess@embecosm.com>

	* doc/gdb.texinfo (TUI): Restructure documentation on TUI layout
	and focus commands.

2015-07-06  Joel Brobecker  <brobecker@adacore.com>

	* NEWS: Create a new section for the next release branch.
	Rename the section of the current branch, now that it has
	been cut.

2015-07-06  Joel Brobecker  <brobecker@adacore.com>

	GDB 7.10 branch created (66c4b3e8a628a207bc6aafef6af0c4128195f56e):
	* version.in: Bump version to 7.10.50.DATE-cvs.

2015-07-06  Luis Machado  <lgustavo@codesourcery.com>

	* breakpoint.c (remove_breakpoint_1): Don't handle permanent
	breakpoints in a special way.
	(remove_breakpoint): Likewise.
	(mark_breakpoints_out): Likewise.

2015-07-06  Andrew Burgess  <andrew.burgess@embecosm.com>

	* doc/gdb.texinfo (TUI): Add comma after @xref.

2015-07-06  Andrew Burgess  <andrew.burgess@embecosm.com>

	* tui/tui-win.c (tui_set_focus): Use structure member 'generic'
	instead of casting the structure type.

2015-07-06  Simon Marchi  <simon.marchi@ericsson.com>

	* valops.c (search_struct_field): Remove OFFSET parameter.
	(value_cast_structs): Adjust calls to search_struct_field.
	(value_struct_elt): Same.
	(find_overload_match): Same.

2015-07-06  Simon Marchi  <simon.marchi@ericsson.com>

	* value.c (value_fetch_lazy): Update comment, change return
	value to void.
	* value.h (value_fetch_lazy): Change return value to void.

2015-07-06  Andrew Burgess  <andrew.burgess@embecosm.com>

	* tui/tui-data.c (tui_partial_win_by_name): Window name is const.
	(tui_win_name): Make parameter and result const.
	* tui/tui-data.h (tui_win_name): Make parameter and result const.

2015-07-06  Patrick Palka  <patrick@parcs.ath.cx>

	* i386-tdep.c (i386_mpx_info_bounds): Don't call error, instead
	use printf_unfiltered.
	(set_mpx_cmd): Add missing trailing space to command string
	literal.
	(_initialize_i386_tdep): Give the "mpx" prefix command its
	correct name.

2015-07-02  Kevin Buettner  <kevinb@redhat.com>

	* rx-tdep.c (RX_USP_REGNUM, RX_BPC_REGNUM): New constants.
	(enum rx_frame_type): New.
	(struct rx_prologue): Add new field `frame_type'.
	(rx_analyze_prologue): Add `frame_type' parameter. Cache this
	parameter in the prologue struct.  Add code for recording
	locations of PC and PSW for fast interrupt and exception frames.
	(rx_skip_prologue): Adjust call to rx_analyze_prologue.
	(rx_analyze_frame_prologue): Add `frame_type' parameter.
	(rx_frame_type): New function.
	(rx_frame_base): Fetch frame type and pass it to rx_analyze_prologue.
	(rx_frame_this_id): Rename parameter `this_prologue_cache' to
	`this_cache'.
	(rx_frame_prev_register): Rename parameter `this_prologue_cache' to
	`this_cache'.  Add cases for RX_FRAME_TYPE_EXCEPTION and
	RX_FRAME_TYPE_FAST_INTERRUPT.
	(normal_frame_p, exception_frame_p, rx_frame_sniffer_common)
	(rx_frame_sniffer, rx_exception_sniffer): New functions.
	(rx_frame_unwind): Use rx_frame_sniffer instead of
	default_frame_sniffer.
	(rx_frame_unwind): New unwinder.
	(rx_gdbarch_init): Register new unwinder.

2015-07-02  Kevin Buettner  <kevinb@redhat.com>

	* rx-tdep.c (RX_BPSW_REGNUM, RX_FPSW_REGNUM): New constants.
	(struct gdbarch_tdep): Add fields rx_psw_type and rx_fpsw_type.
	(rx_register_type): Add cases for RX_PSW_REGNUM, RX_BPSW_REGNUM,
	and RX_FPSW_REGNUM.
	(rx_gdbarch_init): Initialize PSW, BPSW, and FPSW flags types.

2015-07-02  Jan Kratochvil  <jan.kratochvil@redhat.com>

	Fix GCC false warning.
	* s390-linux-tdep.c (s390_handle_arg): Initialize VAL.

2015-07-02  Yao Qi  <yao.qi@linaro.org>

	* aarch64-linux-nat.c (aarch64_linux_insert_hw_breakpoint): Fix
	typo in the debugging message.

2015-07-02  Markus Metzger  <markus.t.metzger@intel.com>

	* btrace.c: Include gdbcmd.h, cli/cli-utils.h, and ctype.h.
	(maint_btrace_cmdlist, maint_btrace_set_cmdlist)
	(maint_btrace_show_cmdlist, maint_btrace_pt_set_cmdlist)
	(maint_btrace_pt_show_cmdlist, maint_btrace_pt_skip_pad)
	(btrace_maint_clear): New.
	(btrace_fetch, btrace_clear): Call btrace_maint_clear.
	(pt_print_packet, btrace_maint_decode_pt)
	(btrace_maint_update_pt_packets, btrace_maint_update_packets)
	(btrace_maint_print_packets, get_uint, get_context_size, no_chunk)
	(maint_btrace_packet_history_cmd)
	(maint_btrace_clear_packet_history_cmd, maint_btrace_clear_cmd)
	(maint_btrace_cmd, maint_btrace_set_cmd, maint_btrace_show_cmd)
	(maint_btrace_pt_set_cmd, maint_btrace_pt_show_cmd)
	(maint_info_btrace_cmd, _initialize_btrace): New.
	* btrace.h (btrace_pt_packet, btrace_pt_packet_s)
	(btrace_maint_packet_history, btrace_maint_info): New.
	(btrace_thread_info) <maint>: New.
	* NEWS: Announce it.

2015-07-02  Markus Metzger  <markus.t.metzger@intel.com>

	* btrace.c (btrace_fetch): Append the new trace data.
	(btrace_clear): Clear the stored trace data.
	* btrace.h (btrace_thread_info) <data>: New.
	* common/btrace-common.h (btrace_data_clear)
	(btrace_data_append): New.
	* common/btrace-common.c (btrace_data_clear)
	(btrace_data_append): New.

2015-07-02  Markus Metzger  <markus.t.metzger@intel.com>

	* nat/linux-btrace.c (linux_enable_bts): Check for
	PERF_ATTR_SIZE_VER5.
	Check for data_offset and data_size fields.  Use them.

2015-07-02  Markus Metzger  <markus.t.metzger@intel.com>

	* NEWS: Announce new commands "record btrace pt" and "record pt".
	Announce new options "set|show record btrace pt buffer-size".
	* btrace.c: Include "rsp-low.h".
	Include "inttypes.h".
	(btrace_add_pc): Add forward declaration.
	(pt_reclassify_insn, ftrace_add_pt, btrace_pt_readmem_callback)
	(pt_translate_cpu_vendor, btrace_finalize_ftrace_pt)
	(btrace_compute_ftrace_pt): New.
	(btrace_compute_ftrace): Support BTRACE_FORMAT_PT.
	(check_xml_btrace_version): Update version check.
	(parse_xml_raw, parse_xml_btrace_pt_config_cpu)
	(parse_xml_btrace_pt_raw, parse_xml_btrace_pt)
	(btrace_pt_config_cpu_attributes, btrace_pt_config_children)
	(btrace_pt_children): New.
	(btrace_children): Add support for "pt".
	(parse_xml_btrace_conf_pt, btrace_conf_pt_attributes): New.
	(btrace_conf_children): Add support for "pt".
	* btrace.h: Include "intel-pt.h".
	(btrace_pt_error): New.
	* common/btrace-common.c (btrace_format_string, btrace_data_fini)
	(btrace_data_empty): Support BTRACE_FORMAT_PT.
	* common/btrace-common.h (btrace_format): Add BTRACE_FORMAT_PT.
	(struct btrace_config_pt): New.
	(struct btrace_config)<pt>: New.
	(struct btrace_data_pt_config, struct btrace_data_pt): New.
	(struct btrace_data)<pt>: New.
	* features/btrace-conf.dtd (btrace-conf)<pt>: New.
	(pt): New.
	* features/btrace.dtd (btrace)<pt>: New.
	(pt, pt-config, cpu): New.
	* nat/linux-btrace.c (perf_event_read, perf_event_read_all)
	(perf_event_pt_event_type, kernel_supports_pt)
	(linux_supports_pt): New.
	(linux_supports_btrace): Support BTRACE_FORMAT_PT.
	(linux_enable_bts): Free tinfo on error.
	(linux_enable_pt): New.
	(linux_enable_btrace): Support BTRACE_FORMAT_PT.
	(linux_disable_pt): New.
	(linux_disable_btrace): Support BTRACE_FORMAT_PT.
	(linux_fill_btrace_pt_config, linux_read_pt): New.
	(linux_read_btrace): Support BTRACE_FORMAT_PT.
	* nat/linux-btrace.h (struct btrace_tinfo_pt): New.
	(struct btrace_target_info)<pt>: New.
	* record-btrace.c (set_record_btrace_pt_cmdlist)
	(show_record_btrace_pt_cmdlist): New.
	(record_btrace_print_pt_conf): New.
	(record_btrace_print_conf): Support BTRACE_FORMAT_PT.
	(btrace_ui_out_decode_error): Support BTRACE_FORMAT_PT.
	(cmd_record_btrace_pt_start): New.
	(cmd_record_btrace_start): Support BTRACE_FORMAT_PT.
	(cmd_set_record_btrace_pt, cmd_show_record_btrace_pt): New.
	(_initialize_record_btrace): Add new commands.
	* remote.c (PACKET_Qbtrace_pt, PACKET_Qbtrace_conf_pt_size): New.
	(remote_protocol_features): Add "Qbtrace:pt".
	Add "Qbtrace-conf:pt:size".
	(remote_supports_btrace): Support BTRACE_FORMAT_PT.
	(btrace_sync_conf): Support PACKET_Qbtrace_conf_pt_size.
	(remote_enable_btrace): Support BTRACE_FORMAT_PT.
	(_initialize_remote): Add new commands.

2015-07-02  Markus Metzger  <markus.t.metzger@intel.com>

	* configure.ac: check for libipt
	* configure: Regenerate.
	* config.in: Regenerate.
	* Makefile.in (LIBIPT): New.
	(CLIBS): Add $LIBIPT.
	* NEWS: document new configure options

2015-07-02  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* compile/compile-object-load.c (compile_object_load): Replace debug
	message "lookup undefined ELF symbol" by 3 more specific messages.

2015-07-01  Kevin Buettner  <kevinb@redhat.com>

	* rl78-tdep.c (struct gdbarch_tdep): Add new field, rl78_psw_type.
	(rl78_register_type): Add case for RL78_PSW_REGNUM.
	(rl78_gdbarch_init): Initialize rl78_psw_type.

2015-07-01  Patrick Palka  <patrick@parcs.ath.cx>

	* tui/tui-hooks.c (tui_refresh_frame_and_register_information):
	Update commentary.  Always refresh the registers when frame
	information has changed.
	* tui/tui-stack.c (tui_show_frame_info): Update commentary.
	Change return type to int.  Return 1 if frame information has
	changed, 0 otherwise.
	(tui_before_prompt): Update commentary.
	* tui/tui-stack.h (tui_show_frame_info): Change return type to
	int.

2015-06-30  Patrick Palka  <patrick@parcs.ath.cx>

	PR tui/13378
	* frame.c (select_frame): Remove reference to
	deprecated_selected_frame_level_changed_hook.
	* frame.h (deprecated_selected_frame_level_changed_hook): Remove
	declaration.
	* stack.c (deprecated_selected_frame_level_changed_hook):
	Likewise.
	* tui/tui-hooks.c (tui_selected_frame_level_changed_hook):
	Rename to ...
	(tui_refresh_frame_and_register_information): ... this.  Bail
	out if there is no stack.  Don't update register information
	unless registers_too_p is true.
	(tui_print_frame_info_listing_hook): Rename to ...
	(tui_dummy_print_frame_info_listing_hook): ... this.
	(tui_before_prompt): New function.
	(tui_normal_stop): New function.
	(tui_before_prompt_observer): New observer.
	(tui_normal_stop_observer): New observer.
	(tui_install_hooks): Set
	deprecated_print_frame_info_listing_hook to
	tui_dummy_print_frame_info_listing_hook.  Register
	tui_before_prompt_observer to call tui_before_prompt and
	tui_normal_stop_observer to call tui_normal_stop.  Remove
	reference to deprecated_selected_frame_level_changed_hook.
	(tui_remove_hooks): Detach and unset tui_before_prompt_observer
	and tui_normal_stop_observer.  Remove reference to
	deprecated_selected_frame_level_changed_hook.

2015-06-30  Patrick Palka  <patrick@parcs.ath.cx>

	PR tui/13378
	* tui/tui-stack.c (tui_set_locator_info): Change prototype to
	return an int instead of void.  Return whether the locator
	window has changed.
	(tui_show_frame_info): If the locator info has not changed, then
	bail out early to avoid refreshing the windows.

2015-06-30  Patrick Palka  <patrick@parcs.ath.cx>

	* tui/tui-stack.c (tui_set_locator_info): Explicitly pass
	LOCATOR_WIN to tui_alloc_content.

2015-06-30  Yao Qi  <yao.qi@linaro.org>

	PR tdep/18605
	* arm-tdep.c (arm_get_next_pc_raw): Break for media
	instructions.

2015-06-29  Kevin Buettner  <kevinb@redhat.com>

	* rx-tdep.c (RX_PSW_REGNUM): New enum constant.
	(rx_dwarf_reg_to_regnum): New function.
	(rx_gdbarch_init): Register rx_dwarf_reg_to_regnum.  Use dwarf2
	unwinding.

2015-06-29  Pedro Alves  <palves@redhat.com>

	PR threads/18127
	* infcall.c (run_inferior_call): On infcall success, if the thread
	was marked stopped before, reset it back to stopped.
	* infrun.c (resume): Don't suppress the set_running calls when
	doing an infcall.
	(normal_stop): Only discard the finish_thread_state cleanup if the
	infcall succeeded.

2015-06-29  Pierre Langlois  <pierre.langlois@arm.com>

	* MAINTAINERS (Write After Approval): Update my email address.

2015-06-26  Keith Seitz  <keiths@redhat.com>
	    Doug Evans  <dje@google.com>

	PR 16253
	* block.c (block_lookup_symbol): For non-function blocks,
	continue to search for a symbol with an exact domain match
	Otherwise, return any previously found "best domain" symbol.
	(block_lookup_symbol_primary): Likewise.

2015-06-26  Patrick Palka  <patrick@parcs.ath.cx>

	* NEWS: Mention the new option "history remove-duplicates".
	* top.c (history_remove_duplicates): New static variable.
	(show_history_remove_duplicates): New static function.
	(gdb_add_history): Conditionally remove duplicate history
	entries.
	(init_main): Add "history remove-duplicates" option.

2015-06-26  Patrick Palka  <patrick@parcs.ath.cx>

	* tui/tui-win.c (focus_completer): New static function.
	(_initialize_tui_win): Set the completion function of the
	"focus" command to focus_completer.

2015-06-26  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* linespec.c (minsym_found): Reset sal.PC for COMPUNIT_LOCATIONS_VALID
	and language_asm..
	* symtab.c (find_function_start_sal): Likewise.

2015-06-25  Gary Benson  <gbenson@redhat.com>

	* solib.c (solib_find_1): Set local variable sysroot to NULL if
	it is the empty string after trailing slashes have been stripped.

2015-06-25  Gary Benson  <gbenson@redhat.com>

	* exec.c (exec_file_locate_attach): Remove gdb_sysroot NULL check.
	* infrun.c (follow_exec): Likewise.
	* remote.c (remote_filesystem_is_local): Likewise.
	* solib.c (solib_find_1): Likewise.

2015-06-24  Keith Seitz  <keiths@redhat.com>

	* build-id.c (build_id_to_debug_bfd): Add cleanup to free
	return value from lrealpath.

2015-06-24  Mike Frysinger  <vapier@gentoo.org>

	* remote-sim.c (gdbsim_open): Move sysroot update to the top.

2015-06-24  Mike Frysinger  <vapier@gentoo.org>

	* remote-sim.c: Include gdb_bfd.h.
	(gdbsim_open): Declare new local sysroot pointing to gdb_sysroot.
	Skip TARGET_SYSROOT_PREFIX in gdb_sysroot when it is active.

2015-06-24  Yao Qi  <yao.qi@linaro.org>

	* aarch64-linux-tdep.c (aarch64_linux_init_abi): Don't call
	set_gdbarch_get_siginfo_type.
	* amd64-linux-tdep.c (amd64_linux_init_abi_common): Likewise.
	* arm-linux-tdep.c (arm_linux_init_abi): Likewise.
	* i386-linux-tdep.c (i386_linux_init_abi): Likewise.
	* m68klinux-tdep.c (m68k_linux_init_abi): Likewise.
	* ppc-linux-tdep.c (ppc_linux_init_abi): Likewise.
	* s390-linux-tdep.c (s390_gdbarch_init): Likewise.
	* tilegx-linux-tdep.c (tilegx_linux_init_abi): Likewise.
	* linux-tdep.c (linux_get_siginfo_type): Change it to static.
	(linux_init_abi): Call set_gdbarch_get_siginfo_type.
	* linux-tdep.h (linux_get_siginfo_type): Remove the declaration.

2015-06-24  Gary Benson  <gbenson@redhat.com>

	* common/buffer.c (stdint.h): Do not include.
	* common/print-utils.c (stdint.h): Likewise.
	* compile/compile-c-symbols.c (gdb_assert.h): Likewise.
	* compile/compile-c-types.c (gdb_assert.h): Likewise.
	* ft32-tdep.c (gdb_assert.h): Likewise.
	* guile/scm-utils.c (stdint.h): Likewise.
	* i386-linux-tdep.c (stdint.h): Likewise.
	* i386-tdep.c (stdint.h): Likewise.
	* nat/linux-btrace.c (stdint.h): Likewise.
	* nat/linux-btrace.h (stdint.h): Likewise.
	* nat/linux-ptrace.c (stdint.h): Likewise.
	* nat/mips-linux-watch.h (stdint.h): Likewise.
	* ppc-linux-nat.c (stdint.h): Likewise.
	* python/python-internal.h (stdint.h): Likewise.
	* stub-termcap.c (stdlib.h): Likewise.
	* target/target.h (stdint.h): Likewise.
	* xtensa-linux-nat.c (stdint.h): Likewise.

2015-06-23  Patrick Palka  <patrick@parcs.ath.cx>

	* top.c (init_history): Look at errno after calling strtol to
	properly map large GDBHISTSIZE values to infinity.

2015-06-23  Doug Evans  <dje@google.com>

	* inferior.h (struct inferior_suspend_state): Delete, unused.
	All references deleted.

2015-06-23  Mike Frysinger  <vapier@gentoo.org>

	* microblaze-tdep.c (microblaze_push_dummy_code): Delete.
	(microblaze_push_dummy_call): Likewise.
	(microblaze_gdbarch_init): Delete calls to set_gdbarch_push_dummy_code
	and set_gdbarch_push_dummy_call.

2015-06-23  Yao Qi  <yao.qi@linaro.org>

	* amd64-linux-nat.c (amd64_linux_fetch_inferior_registers):
	Check whether have_ptrace_getregset is TRIBOOL_TRUE explicitly.
	(amd64_linux_store_inferior_registers): Likewise.
	* arm-linux-nat.c (fetch_fpregister): Likewise.
	(fetch_fpregs, store_fpregister): Likewise.
	(store_fpregister, store_fpregs): Likewise.
	(fetch_register, fetch_regs): Likewise.
	(store_register, store_regs): Likewise.
	(fetch_vfp_regs, store_vfp_regs): Likewise.
	(arm_linux_read_description): Check have_ptrace_getregset is
	TRIBOOL_UNKNOWN.  Set have_ptrace_getregset to TRIBOOL_TRUE
	or TRIBOOL_FALSE.
	* i386-linux-nat.c (fetch_xstateregs): Check
	have_ptrace_getregset is not TRIBOOL_TRUE.
	(store_xstateregs): Likewise.
	* linux-nat.c (have_ptrace_getregset): Change its type to
	enum tribool.
	* linux-nat.h (tribool): New enum.
	* x86-linux-nat.c (x86_linux_read_description): Use enum tribool.
	Check whether have_ptrace_getregset is TRIBOOL_TRUE.

2015-06-19  Doug Evans  <dje@google.com>

	* NEWS: Mention Sun's version of stabs is no longer supported.
	* elfread.c (free_elfinfo): Delete.  All uses updated.
	(elfstab_offset_sections): Delete.  All uses updated.
	* gdb-stabs.h (stab_section_info): Delete.  All uses updated.
	* psympriv.h (partial_symtab) <section_offsets>: Delete.
	All uses updated.
	* psymtab.c (start_psymtab_common): Delete arg section_offsets.
	All callers updated.

2015-06-18  Simon Marchi  <simon.marchi@ericsson.com>

	* common/rsp-low.c (needs_escaping): New.
	(remote_escape_output): Add unit_size parameter. Refactor to
	support multi-byte addressable units.  Rename parameters.
	* common/rsp-low.h (remote_escape_output): Add unit_size
	parameter and rename others. Update doc.
	* remote.c (align_for_efficient_write): New.
	(remote_write_bytes_aux): Add unit_size parameter and use it.
	Rename some variables.  Update doc.
	(remote_xfer_partial): Get unit size and use it.
	(remote_read_bytes_1): Add unit_size parameter and use it.
	Rename some variables. Update doc.
	(remote_write_bytes): Same.
	(remote_xfer_live_readonly_partial): Same.
	(remote_read_bytes): Same.
	(remote_flash_write): Update call to remote_write_bytes_aux.
	(remote_write_qxfer): Update call to remote_escape_output.
	(remote_search_memory): Same.
	(remote_hostio_pwrite): Same.

2015-06-17  Luis Machado  <lgustavo@codesourcery.com>

	* breakpoint.c (add_location_to_breakpoint): Don't mark permanent
	locations as inserted.
	Update and expand comment about permanent locations.
	(bp_loc_is_permanent): Don't return 0 for bp_call_dummy.
	Move comment to add_location_to_breakpoint.
	(update_global_location_list): Don't error out if a permanent
	breakpoint is not marked inserted.
	Don't error out if a non-permanent breakpoint location is inserted on
	top of a permanent breakpoint.

2015-06-17  Luis Machado  <lgustavo@codesourcery.com>

	* breakpoint.c (make_breakpoint_permanent): Remove unused
	function.
	* breakpoint.h (make_breakpoint_permanent): Remove declaration.

2015-06-17  Patrick Palka  <patrick@parcs.ath.cx>

	PR gdb/16999
	* NEWS: Mention new GDBHISTSIZE behavior.
	* top.c (init_history): For null or out-of-range GDBHISTSIZE,
	set history size to unlimited.  Ignore non-numeric GDBHISTSIZE.

2015-06-17  Patrick Palka  <patrick@parcs.ath.cx>

	* NEWS: Mention that GDBHISTSIZE is read instead of HISTSIZE.
	* top.c (init_history): Read from GDBHISTSIZE instead of
	HISTSIZE.
	(init_main): Refer to GDBHISTSIZE instead of HISTSIZE.

2015-06-17  Patrick Palka  <patrick@parcs.ath.cx>

	* top.c (gdb_safe_append_history): Do not call
	history_truncate_file if the history is not stifled.

2015-06-17  Andreas Arnez  <arnez@linux.vnet.ibm.com>

	* syscalls/s390-linux.xml: Add syscalls 344 through 354.
	* syscalls/s390x-linux.xml: Likewise.

2015-06-16  Michael Eager  <eager@eagercon.com>

	* nat/linux-namespaces.c (MSG_CMSG_CLOEXEC): Define if not defined.

2015-06-16  Patrick Palka  <patrick@parcs.ath.cx>

	* tui/tui-hooks.c (tui_selected_frame_level_changed_hook): Call
	target_terminal_ours_for_output() before calling
	tui_show_frame_info(), and restore the original terminal
	settings afterwards.

2015-06-16  Martin Simmons  <martin@lispworks.com>  (tiny patch)

	* arm-linux-nat.c: Include nat/linux-ptrace.h.

2015-06-15  Simon Marchi  <simon.marchi@ericsson.com>

	* mi/mi-main.c (mi_cmd_data_read_memory_bytes): Consider addressable
	memory unit size.
	(mi_cmd_data_write_memory_bytes): Same.

2015-06-15  Simon Marchi  <simon.marchi@ericsson.com>

	* corefile.c (write_memory): Update doc.
	* gdbcore.h (write_memory): Same.

2015-06-15  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* linux-tdep.c (enum filterflags): Make it from anonymous enum.
	(dump_mapping_p): Use it for parameter filterflags.
	(linux_find_memory_regions_full): Use it for variable filterflags.

2015-06-15  Aleksandar Ristovski  <aristovski@qnx.com
	    Jan Kratochvil  <jan.kratochvil@redhat.com>

	Merge multiple hex conversions.
	* monitor.c: Include rsp-low.h.
	(fromhex): Remove definition.

2015-06-15  Aleksandar Ristovski  <aristovski@qnx.com
	    Jan Kratochvil  <jan.kratochvil@redhat.com>

	Move utility functions to common/.
	* cli/cli-utils.c (skip_spaces, skip_spaces_const, skip_to_space_const):
	Move defs to common/common-utils.c.
	* cli/cli-utils.h (skip_spaces, skip_spaces_const, skip_to_space)
	(skip_to_space_const): Move decls to common/common-utils.h.
	* common/common-defs.h: Move include of common-types.h before
	common-utils.h.
	* common/common-utils.c: Include host-defs.h and ctype.h.
	(HIGH_BYTE_POSN, is_digit_in_base, digit_to_int, strtoulst): Move
	from utils.c.
	(skip_spaces, skip_spaces_const, skip_to_space_const): Move from
	cli/cli-utils.c.
	* common/common-utils.h (strtoulst): Move decl from utils.h.
	(skip_spaces, skip_spaces_const, skip_to_space, skip_to_space_const):
	Move from cli/cli-utils.h.
	* common/host-defs.h: Include limits.h.
	(TARGET_CHAR_BIT, HOST_CHAR_BIT): Moved from defs.h.
	(skip_spaces, skip_spaces_const): Move decls from cli/cli-utils.h.
	* defs.h (TARGET_CHAR_BIT, HOST_CHAR_BIT): Move to
	common/common-utils.h.
	* utils.c (HIGH_BYTE_POSN, is_digit_in_base, digit_to_int)
	(strtoulst): Move to common/common-utils.c.
	* utils.h (strtoulst): Moved decl to common/common-utils.h.

2015-06-15  Yao Qi  <yao.qi@linaro.org>

	* data-directory/Makefile.in (SYSCALLS_FILES): Add aarch64-linux.xml.

2015-06-10  Jon Turney  <jon.turney@dronecode.org.uk>

	* build-id.c: Don't include elf-bfd.h.
	(build_id_bfd_get): Use bfd_build_id.
	(build_id_verify): Ditto.
	* build-id.h: Ditto.
	(find_separate_debug_file_by_buildid): Ditto.
	* python/py-objfile.c: Don't include elf-bfd.h.
	(objfpy_get_build_id) Use bfd_build_id.
	(objfpy_build_id_matches, objfpy_lookup_objfile_by_build_id): Ditto.
	* coffread.c: Include build-id.h.
	(coff_symfile_read): Try find_separate_debug_file_by_buildid.

2015-06-03  Jon Turney  <jon.turney@dronecode.org.uk>

	* windows-nat.c (do_windows_fetch_inferior_registers)
	(handle_output_debug_string): Replace __COPY_CONTEXT_SIZE
	conditional with __CYGWIN__.

2015-06-13  Andrew Burgess  <andrew.burgess@embecosm.com>

	* completer.c: Add arch-utils.h include.
	(enum reg_completer_targets): New enum.
	(reg_or_group_completer_1): New function containing old
	reg_or_group_completer, add and use new parameter to control what
	is completed on.  Use get_current_arch rather than architecture of
	currently selected frame.
	(reg_or_group_completer): Call new reg_or_group_completer_1.
	(reggroup_completer): Call new reg_or_group_completer_1.
	* completer.h (reggroup_completer): Add declaration.
	* tui/tui-regs.c: Add 'completer.h' include.
	(tui_reg_next_command): Renamed to...
	(tui_reg_next): ...this.  Adjust parameters and return rather than
	display new group.
	(tui_reg_prev_command): Renamed to...
	(tui_reg_prev): ...this.  Adjust parameters and return rather than
	display new group.
	(tui_reg_float_command): Delete.
	(tui_reg_general_command): Delete.
	(tui_reg_system_command): Delete.
	(tui_reg_command): Rewrite to perform switching of register group.
	Add header comment.
	(tuireglist): Remove.
	(tui_reggroup_completer): New function.
	(_initialize_tui_regs): Remove 'tui reg' sub-commands, update
	creation of 'tui reg' command.
	* NEWS: Add comment about 'tui reg' changes.

2015-06-12  Simon Marchi  <simon.marchi@ericsson.com>

	* target.c (target_read): Consider addressable unit size when
	reading from a memory object.
	(read_memory_robust): Same.
	(read_whatever_is_readable): Same.
	(target_write_with_progress): Consider addressable unit size
	when writing to a memory object.
	* target.h (target_read): Update documentation.
	(target_write): Add documentation.

2015-06-12  Simon Marchi  <simon.marchi@ericsson.com>

	* arch-utils.h (default_addressable_memory_unit_size): New.
	* arch-utils.c (default_addressable_memory_unit_size): New.
	* gdbarch.sh (addressable_memory_unit_size): New.
	* gdbarch.h: Re-generate.
	* gdbarch.c: Re-generate.

2015-06-12  Simon Marchi  <simon.marchi@ericsson.com>

	* target.c (target_read): Rename variables and use
	TARGET_XFER_E_IO.
	(target_read_with_progress): Same.
	(read_memory_robust): Constify parameters and rename
	variables.
	(read_whatever_is_readable): Constify parameters,
	rename variables, adjust formatting.
	* target.h (read_memory_robust): Constify parameters.

2015-06-12  Ulrich Weigand  <uweigand@de.ibm.com>

	* ppc-sysv-tdep.c (ppc64_sysv_abi_return_value_base): Handle short
	synthetic (non-AltiVec) vector types.
	(ppc64_sysv_abi_return_value): Likewise.

2015-06-12  Antoine Tremblay  <antoine.tremblay@ericsson.com>

	PR breakpoints/16465
	* breakpoint.c (create_breakpoint): Save extra_string for
	pending breakpoints.

2015-06-10  Walfred Tedeschi  <walfred.tedeschi@intel.com>

	* i386-tdep.c (i386_mpx_get_bt_entry): Add a cast for mpx_bd_mask
	and bt_mask to CORE_ADDR.

2015-06-11  Gary Benson <gbenson@redhat.com>

	* nat/linux-namespaces.c (mnsh_send_message): Use pulongest.
	(mnsh_recv_message): Likewise.

2015-06-11  Walfred Tedeschi  <walfred.tedeschi@intel.com>

	* i386-tdep.c (i386_mpx_print_bounds): use of LONGEST instead of
	long long int and plongest instead of %ll.

2015-06-11  Gary Benson <gbenson@redhat.com>

	* nat/linux-namespaces.c (gdb_wait.h): New include.
	(sys/wait.h): Do not include.

2015-06-10  Simon Marchi  <simon.marchi@ericsson.com>

	* dwarf2read.c (dwarf_record_line): Call dwarf_record_line if
	end_sequence is true.

2015-06-10  Jan Kratochvil  <jan.kratochvil@redhat.com>

	Code cleanup.
	* solib-target.c (library_list_start_list): Use explicit NULL
	comparison.

2015-06-10  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* solib-target.c (library_list_start_list): Do not dereference
	variable version in its initialization.  Make the VERSION check handle
	NULL.
	(library_list_attributes): Make "version" GDB_XML_AF_OPTIONAL.

2015-06-10  Gary Benson <gbenson@redhat.com>

	* NEWS: Announce support for direct access of executable and
	shared library files when attaching to inferiors in containers
	on GNU/Linux systems.

2015-06-10  Gary Benson <gbenson@redhat.com>

	* remote.c (struct remote_state) <fs_pid>: New field.
	(new_remote_state): Initialize the above.
	(PACKET_vFile_setfs): New enum value.
	(remote_hostio_set_filesystem): New function.
	(remote_hostio_open): Call the above.
	(remote_hostio_unlink): Likewise.
	(remote_hostio_readlink): Likewise.
	(_initialize_remote): Register new "set/show remote
	hostio-setfs-packet" command.
	* NEWS: Announce new vFile:setfs packet.

2015-06-10  Gary Benson <gbenson@redhat.com>

	* linux-nat.c (nat/linux-namespaces.h): New include.
	(fileio.h): Likewise.
	(linux_nat_filesystem_is_local): New function.
	(linux_nat_fileio_pid_of): Likewise.
	(linux_nat_fileio_open): Likewise.
	(linux_nat_fileio_readlink): Likewise.
	(linux_nat_fileio_unlink): Likewise.
	(linux_nat_add_target): Initialize to_filesystem_is_local,
	to_fileio_open, to_fileio_readlink and to_fileio_unlink.
	(_initialize_linux_nat): New "set/show debug linux-namespaces"
	commands.
	* NEWS: Mention new "set/show debug linux-namespaces" commands.

2015-06-10  Gary Benson <gbenson@redhat.com>

	* target.h (struct inferior): New forward declaration.
	(struct target_ops) <to_filesystem_is_local>: Update comment.
	(struct target_ops) <to_fileio_open>: New argument inf.
	Update comment.  All implementations updated.
	(struct target_ops) <to_fileio_unlink>: Likewise.
	(struct target_ops) <to_fileio_readlink>: Likewise.
	(target_filesystem_is_local): Update comment.
	(target_fileio_open): New argument inf.  Update comment.
	(target_fileio_unlink): Likewise.
	(target_fileio_readlink): Likewise.
	(target_fileio_read_alloc): Likewise.
	(target_fileio_read_stralloc): Likewise.
	* target.c (target_fileio_open): New argument inf.
	Pass inf to implementation.  Update debug printing.
	(target_fileio_unlink): Likewise.
	(target_fileio_readlink): Likewise.
	(target_fileio_read_alloc_1): New argument inf. Pass inf
	to target_fileio_open.
	(target_fileio_read_alloc): New argument inf. Pass inf to
	target_fileio_read_alloc_1.
	(target_fileio_read_stralloc): Likewise.
	* gdb_bfd.c (inferior.h): New include.
	(gdb_bfd_iovec_fileio_open): Replace unused "open_closure"
	argument with new argument "inferior".  Pass inferior to
	target_fileio_open.
	(gdb_bfd_open): Supply inferior argument to
	gdb_bfd_iovec_fileio_open.
	* linux-tdep.c (linux_info_proc): Supply inf argument to
	relevant target_fileio calls.
	(linux_find_memory_regions_full): Likewise.
	(linux_fill_prpsinfo): Likewise.
	* remote.c (remote_filesystem_is_local): Supply inf
	argument to remote_hostio_open.
	(remote_file_put): Likewise.
	(remote_file_get): Likewise.
	(remote_file_delete): Supply inf argument to
	remote_hostio_unlink.

2015-06-10  Gary Benson <gbenson@redhat.com>

	* inf-child.c (inf_child_fileio_open): Replace comment.
	(inf_child_fileio_pwrite): Likewise.
	(inf_child_fileio_pread): Likewise.
	(inf_child_fileio_fstat): Insert blank line before comment.
	(inf_child_fileio_close): Replace comment.
	(inf_child_fileio_unlink): Likewise.
	(inf_child_fileio_readlink): Likewise.
	* remote.c (remote_hostio_open): Likewise.
	(remote_hostio_pread): Likewise.
	(remote_hostio_pwrite): Likewise.
	(remote_hostio_close): Likewise.
	(remote_hostio_unlink): Likewise.
	(remote_hostio_readlink): Likewise.
	(remote_hostio_fstat): Likewise.
	(remote_filesystem_is_local): Likewise.
	* target.c (target_fileio_open): Likewise.
	(target_fileio_pwrite): Likewise.
	(target_fileio_pread): Likewise.
	(target_fileio_fstat): Insert blank line before comment.
	(target_fileio_close): Replace comment.
	(target_fileio_unlink): Likewise.
	(target_fileio_readlink): Likewise.
	(target_fileio_read_alloc): Likewise.
	(target_fileio_read_stralloc): Likewise.

2015-06-10  Gary Benson <gbenson@redhat.com>

	* linux-thread-db.c (nat/linux-namespaces.h): New include.
	(check_pid_namespace_match): Use linux_ns_same rather than
	linux_proc_pid_get_ns to spot PID namespace mismatches.
	* nat/linux-procfs.h (linux_proc_pid_get_ns): Remove.
	* nat/linux-procfs.c (linux_proc_pid_get_ns): Likewise.

2015-06-10  Gary Benson <gbenson@redhat.com>

	* configure.ac (AC_CHECK_FUNCS): Add setns.
	* config.in: Regenerate.
	* configure: Likewise.
	* nat/linux-namespaces.h: New file.
	* nat/linux-namespaces.c: Likewise.
	* Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-namespaces.h.
	(linux-namespaces.o): New rule.
	* config/aarch64/linux.mh (NATDEPFILES): Add linux-namespaces.o.
	* config/alpha/alpha-linux.mh (NATDEPFILES): Likewise.
	* config/arm/linux.mh (NATDEPFILES): Likewise.
	* config/i386/linux.mh (NATDEPFILES): Likewise.
	* config/i386/linux64.mh (NATDEPFILES): Likewise.
	* config/ia64/linux.mh (NATDEPFILES): Likewise.
	* config/m32r/linux.mh (NATDEPFILES): Likewise.
	* config/m68k/linux.mh (NATDEPFILES): Likewise.
	* config/mips/linux.mh (NATDEPFILES): Likewise.
	* config/pa/linux.mh (NATDEPFILES): Likewise.
	* config/powerpc/linux.mh (NATDEPFILES): Likewise.
	* config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise.
	* config/powerpc/spu-linux.mh (NATDEPFILES): Likewise.
	* config/s390/linux.mh (NATDEPFILES): Likewise.
	* config/sparc/linux.mh (NATDEPFILES): Likewise.
	* config/sparc/linux64.mh (NATDEPFILES): Likewise.
	* config/tilegx/linux.mh (NATDEPFILES): Likewise.
	* config/xtensa/linux.mh (NATDEPFILES): Likewise.

2015-06-10  Gary Benson <gbenson@redhat.com>

	* utils.h (make_cleanup_close): Moved to common/filestuff.h.
	* utils.c (do_close_cleanup): Moved to common/filestuff.c.
	(make_cleanup_close): Likewise.
	* common/filestuff.h (make_cleanup_close): Moved from utils.h.
	* common/filestuff.c (do_close_cleanup): Moved from utils.c.
	(make_cleanup_close): Likewise.

2015-06-03  Jon Turney  <jon.turney@dronecode.org.uk>

	* windows-nat.c (thread_rec): Also ignore ERROR_INVALID_HANDLE
	from SuspendThread().

2015-06-03  Jon Turney  <jon.turney@dronecode.org.uk>

	* windows-nat.c (handle_output_debug_string): Trim trailing '\n'
	from OutputDebugString.

2015-06-10  Walfred Tedeschi  <walfred.tedeschi@intel.com>
			Mircea Gherzan  <mircea.gherzan@intel.com>

	* i386-tdep.c (MPX_BASE_MASK, MPX_BD_MASK, MPX_BT_MASK, MPX_BD_MASK_32,
	MPX_BT_MASK_32): New macros.
	(i386_mpx_set_bounds): New function that implements
	the command "set-mpx-bound".
	(i386_mpx_enabled): Helper function to test MPX availability.
	(i386_mpx_bd_base): Helper function to calculate the base directory
	address.
	(i386_mpx_get_bt_entry): Helper function to access a bound
	table entry.
	(i386_mpx_print_bounds): Effectively display bound information.
	(_initialize_i386_tdep): Add new commands to commands "set mpx" and
	"show mpx".
	(_initialize_i386_tdep):
	Add "bound" to the commands "show mpx" and "set mpx" commands.
	(mpx_set_cmdlist and mpx_show_cmdlist): List for the new prefixed "set mpx"
	and "show mpx" commands.
	* NEWS: List new commands for MPX support.

2015-06-09  Gary Benson <gbenson@redhat.com>

	* common/fileio.h (fileio_to_host_mode): New declaration.
	* common/fileio.c (fileio_to_host_mode): New Function.
	* inf-child.c (inf_child_fileio_open): Process mode argument
	with fileio_to_host_mode.

2015-06-09  Gary Benson <gbenson@redhat.com>

	* common/fileio.c (fileio_mode_pack): Fix preprocessor
	conditional.

2015-06-05  Gary Benson <gbenson@redhat.com>

	* gdb_bfd.c (gdb_bfd_open): Move vgdb special case to...
	* remote.c (remote_filesystem_is_local): ...here.

2015-06-04  Yao Qi  <yao.qi@linaro.org>

	* gdbarch.c: Regenerate it.

2015-06-03  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* arch-utils.c (default_infcall_munmap): New.
	* arch-utils.h (default_infcall_munmap): New declaration.
	* compile/compile-object-load.c (struct munmap_list, munmap_list_add)
	(munmap_list_free, munmap_listp_free_cleanup): New.
	(struct setup_sections_data): Add field munmap_list_headp.
	(setup_sections): Call munmap_list_add.
	(compile_object_load): New variable munmap_list_head, initialize
	setup_sections_data.munmap_list_headp, return munmap_list_head.
	* compile/compile-object-load.h (struct munmap_list): New declaration.
	(struct compile_module): Add field munmap_list_head.
	(munmap_list_free): New declaration.
	* compile/compile-object-run.c (struct do_module_cleanup): Add field
	munmap_list_head.
	(do_module_cleanup): Call munmap_list_free.
	(compile_object_run): Pass munmap_list_head to do_module_cleanup.
	* gdbarch.c: Regenerate.
	* gdbarch.h: Regenerate.
	* gdbarch.sh (infcall_munmap): New.
	* linux-tdep.c (linux_infcall_munmap): New.
	(linux_init_abi): Install it.

2015-06-02  Simon Marchi  <simon.marchi@ericsson.com>

	PR gdb/15564
	* inferior.c (detach_inferior): Call exit_inferior_1 with silent = 0.

2015-06-02  Yao Qi  <yao.qi@linaro.org>

	* i386-linux-nat.c: Include linux-nat.h.

2015-06-01  Andreas Schwab  <schwab@linux-m68k.org>
	    Jan Kratochvil  <jan.kratochvil@redhat.com>

	PR symtab/18392
	* dwarf2-frame-tailcall.c (pretended_chain_levels): Correct
	assertion.
	* dwarf2loc.c (chain_candidate): Likewise.

2015-06-01  Yao Qi  <yao.qi@linaro.org>

	* arm-linux-nat.c (fetch_vfp_regs): Use PTRACE_GETREGSET.
	(store_vfp_regs): Use PTRACE_SETREGSET.

2015-06-01  Yao Qi  <yao.qi@linaro.org>

	* arm-linux-nat.c (fetch_fpregister): Use PTRACE_GETREGSET.
	(fetch_fpregs): Likewise.
	* arm-linux-nat.c (store_fpregister): Use PTRACE_SETREGSET.
	(store_fpregs): Likewise.

2015-06-01  Yao Qi  <yao.qi@linaro.org>

	* arm-linux-nat.c (fetch_register): Use PTRACE_GETREGSET.
	(fetch_regs): Likewise.
	(store_regs): Use PTRACE_SETREGSET.
	(store_register): Likewise.

2015-06-01  Yao Qi  <yao.qi@linaro.org>

	* arm-linux-nat.c (arm_linux_read_description): Check whether
	kernel supports PTRACE_GETREGSET.

2015-06-01  Yao Qi  <yao.qi@linaro.org>

	* x86-linux-nat.c (have_ptrace_getregset): Move it to ...
	* linux-nat.c: ... here.
	* x86-linux-nat.h (have_ptrace_getregset): Move the declaration
	to ...
	* linux-nat.h: ... here.

2015-06-01  Yao Qi  <yao.qi@linaro.org>

	* amd64-linux-nat.c: Include "nat/linux-ptrace.h".
	* i386-linux-nat.c: Likewise.
	* nat/linux-ptrace.h (PTRACE_GETREGSET, PTRACE_SETREGSET): Define.
	* s390-linux-nat.c: Include "nat/linux-ptrace.h".
	(PTRACE_GETREGSET, PTRACE_SETREGSET): Remove.
	* x86-linux-nat.c: Include "nat/linux-ptrace.h".
	* x86-linux-nat.h (PTRACE_GETREGSET, PTRACE_SETREGSET): Remove.

2015-05-30  Eli Zaretskii  <eliz@gnu.org>

	* go32-nat.c (go32_xfer_memory): Fix the return value to be
	compatible to what read_child and write_child return.  This
	unbreaks that DJGPP build of GDB which was broken since v7.7.

2015-05-29  Martin Galvan  <martin.galvan@tallertechnologies.com>

	* MAINTAINERS (Write After Approval): Add Martin Galvan.

2015-05-29  Roland McGrath  <mcgrathr@google.com>

	PR gdb/18464
	* osabi.c (generic_elf_osabi_sniff_abi_tag_sections): Use warning
	rather than internal_error for an unrecognized value.

2015-05-29  Max Filippov  <jcmvbkbc@gmail.com>

	* xtensa-tdep.c (xtensa_pseudo_register_read)
	(xtensa_pseudo_register_write): Don't alias last pseudo register
	to a1.

2015-05-28  Don Breazeal  <donb@codesourcery.com>

	* infrun.c (follow_fork_inferior): Ensure the use of
	process-style ptids (pid,0,0) in verbose/debug "Detaching"
	messages.

2015-05-28  Doug Evans  <dje@google.com>

	* dwarf2read.c (record_line_ftype): Remove, duplicate.

2015-05-28  Yao Qi  <yao.qi@linaro.org>

	* arm-linux-nat.c (arm_linux_has_wmmx_registers): Remove.
	(arm_linux_fetch_inferior_registers): Use
	tdep->have_wmmx_registers instead of arm_linux_has_wmmx_registers.
	(arm_linux_store_inferior_registers): Likewise.
	(arm_linux_read_description): Don't set
	arm_linux_has_wmmx_registers.
	* arm-tdep.c (arm_gdbarch_init): Set
	tdep->have_wmmx_registers according target descriptions.
	* arm-tdep.h (struct gdbarch_tdep) <have_wmmx_registers>: New
	field.

2015-05-28  Yao Qi  <yao.qi@linaro.org>

	* arm-linux-nat.c (arm_linux_vfp_register_count): Remove.
	(fetch_vfp_regs): Use vfp_register_count from gdbarch_tdep
	instead of arm_linux_vfp_register_count.
	(store_vfp_regs): Likewise.
	(arm_linux_fetch_inferior_registers): Likewise.
	(arm_linux_store_inferior_registers): Likewise.
	(arm_linux_read_description): Don't set
	arm_linux_vfp_register_count.
	* arm-linux-tdep.c (arm_linux_iterate_over_regset_sections):
	Adjust.
	* arm-tdep.c (arm_gdbarch_init): Add assert on
	vfp_register_count.
	* arm-tdep.h (struct gdbarch_tdep) <have_vfp_registers>: Rename
	field to vfp_register_count.  All users updated.

2015-05-28  Kyle Huey  <me@kylehuey.com>  (tiny patch)

	* gdb/arm-tdep.c (arm_gdbarch_init): Perform arm_abi detection on
	ELFOSABI_GNU binaries.

2015-05-27  Doug Evans  <dje@google.com>

	* dwarf2read.c (lnp_state_machine): New typedef.
	(lnp_reader_state): New typedef.
	(dwarf_record_line_1): Renamed from dwarf_record_line.
	All callers updated.
	(dwarf_record_line): New function.
	(init_lnp_state_machine): New function.
	(check_line_address): Replace p_record_line parameter with state.
	All callers updated.
	(dwarf_decode_lines_1): Call dwarf_record_line, init_lnp_state_machine.
	Update to record state in lnp_state_machine.

2015-05-27  Doug Evans  <dje@google.com>

	* dwarf2read.c (record_line_ftype): New typedef.
	(check_line_address): New function.
	(dwarf_decode_lines_1): Call it.

2015-05-27  Doug Evans  <dje@google.com>

	* NEWS: Mention "set debug dwarf-line".
	* dwarf2read.c (dwarf_line_debug): New static global.
	(add_include_dir): Add debug dwarf-line support.
	(add_file_name, dwarf_record_line, dwarf_finish_line): Ditto.
	(_initialize_dwarf2_read): New parameter "debug dwarf-line".

2015-05-27  Doug Evans  <dje@google.com>

	* cp-namespace.c (cp_lookup_nested_symbol): New arg "domain".
	All callers updated.
	(cp_lookup_nested_symbol_1, find_symbol_in_baseclass): Ditto.
	* cp-support.h (cp_lookup_nested_symbol): Update.

2015-05-27  Doug Evans  <dje@google.com>

	PR symtab/18258
	* block.c (block_find_symbol): New function.
	(block_find_non_opaque_type): Ditto.
	(block_find_non_opaque_type_preferred): Ditto.
	* block.h (block_symbol_matcher_ftype): New typedef.
	(block_find_symbol): Declare.
	(block_find_non_opaque_type): Ditto.
	(block_find_non_opaque_type_preferred): Ditto.
	* dwarf2read.c (dw2_lookup_symbol): Call block_find_symbol.
	* psymtab.c (psym_lookup_symbol): Ditto.
	* symtab.c (basic_lookup_transparent_type_1): New function.
	(basic_lookup_transparent_type): Call it.

2015-05-27  Yao Qi  <yao.qi@linaro.org>

	* aarch64-tdep.c (aarch64_record_data_proc_simd_fp): Return
	AARCH64_RECORD_UNKNOWN for unknown instruction encoding.

2015-05-27  Yao Qi  <yao.qi@linaro.org>

	* aarch64-tdep.c (aarch64_record_branch_except_sys): Split lines
	before operator &&.
	(aarch64_record_load_store): Likewise.

2015-05-26  Doug Evans  <dje@google.com>

	PR c++/18141, c++/18417.
	* cp-support.c (cp_lookup_rtti_type): Handle the case of NAME being
	a typedef.

2015-05-26  Doug Evans  <dje@google.com>

	* NEWS: Add entries for command renamings.
	* dwarf2read.c (dwarf_read_debug): Renamed from dwarf2_read_debug.
	All uses updated.
	(dwarf_die_debug): Renamed from dwarf2_die_debug.  All uses updated.
	(dwarf_max_cache_age): Renamed from dwarf2_max_cache_age.
	All uses updated.
	(show_dwarf_max_cache_age): Renamed from show_dwarf2_max_cache_age.
	All callers updated.  Fix spelling of DWARF in help text.
	(set_dwarf_cmdlist): Renamed from set_dwarf2_cmdlist.
	All uses updated.
	(show_dwarf_cmdlist): Renamed from show_dwarf2_cmdlist.
	All uses updated.
	(set_dwarf_cmd): Renamed from set_dwarf2_cmd.  All callers updated.
	(show_dwarf_cmd): Renamed from show_dwarf2_cmd.  All callers updated.
	(dwarf_always_disassemble): Renamed from dwarf_always_disassemble.
	All uses updated.
	(show_dwarf_always_disassemble): Renamed from
	show_dwarf2_always_disassemble.  All callers updated.
	(_initialize_dwarf2_read): Rename "set/show dwarf2" prefix to
	"set/show dwarf".  Rename "set/show dwarf2 max-cache-age" to
	"set/show dwarf max-cache-age".  Rename
	"set/show dwarf2 always-disassemble" to
	"set/show dwarf always-disassemble".  Rename
	"set/show debug dwarf2-read" to "set/show debug dwarf-read".  Rename
	"set/show debug dwarf2-die" to "set/show debug dwarf-die".

2015-05-26  Doug Evans  <dje@google.com>

	PR python/18438
	* python/py-lazy-string.c (stpy_convert_to_value): Use
	gdbpy_gdb_memory_error not PyExc_MemoryError.
	(gdbpy_create_lazy_string_object): Ditto.

2015-05-26  Andrew Burgess  <andrew.burgess@embecosm.com>

	* tui/tui-regs.c (tui_reg_next_command): Compare against NULL.

2015-05-26  Andrew Burgess  <andrew.burgess@embecosm.com>

	* tui/tui-regs.c (tui_reg_prev_command): New function.
	(_initialize_tui_regs): Add 'prev' command for 'tui reg'.
	* reggroups.c (reggroup_prev): New function.
	* reggroups.h (reggroup_prev): Add declaration.  Update comment.

2015-05-26  Omair Javaid  <omair.javaid@linaro.org>
	    Yao Qi  <yao.qi@linaro.org>

	* aarch64-linux-tdep.c: Include linux-record.h and
	record-full.h.
	(struct linux_record_tdep aarch64_linux_record_tdep): Declare.
	(aarch64_syscall): New enum.
	(aarch64_canonicalize_syscall): New function.
	(aarch64_all_but_pc_registers_record): New function.
	(aarch64_linux_syscall_record): New function.
	(aarch64_linux_init_abi): Install AArch64 process record
	handler.  Update to handle syscall recording.
	* aarch64-tdep.c: Include record.h and record-full.h.
	(submask, bit, bits, REG_ALLOC, MEM_ALLOC): New macros.
	(struct aarch64_mem_r): Define.
	(aarch64_record_result): New enum.
	(struct insn_decode_record): Define.
	(insn_decode_record): New typedef.
	(aarch64_record_data_proc_reg): New function.
	(aarch64_record_data_proc_imm): New function.
	(aarch64_record_branch_except_sys): New function.
	(aarch64_record_load_store): New function.
	(aarch64_record_data_proc_simd_fp): New function.
	(aarch64_record_asimd_load_store): New function.
	(aarch64_record_decode_insn_handler): New function.
	(deallocate_reg_mem): New function.
	(aarch64_process_record): New function.
	* aarch64-tdep.h (struct gdbarch_tdep) <aarch64_syscall_record>:
	New field.
	(aarch64_process_record): New extern declaration.
	* configure.tgt: Add linux-record.o to gdb_target_obs.
	* linux-record.h (struct linux_record_tdep) <arg7>: New field.

2015-05-26  Omair Javaid  <omair.javaid@linaro.org>

	* NEWS: Add a note on process record-replay support on aarch64*-linux*
	targets.

2015-05-26  Martin Galvan  <martin.galvan@tallertechnologies.com>

	* amd64-tdep.c: Replace in_function_epilogue_p with
	stack_frame_destroyed_p throughout.
	* arch-utils.c: Ditto.
	* arch-utils.h: Ditto.
	* arm-tdep.c: Ditto.
	* breakpoint.c: Ditto.
	* gdbarch.sh: Ditto.
	* hppa-tdep.c: Ditto.
	* i386-tdep.c: Ditto.
	* mips-tdep.c: Ditto.
	* nios2-tdep.c: Ditto.
	* rs6000-tdep.c: Ditto.
	* s390-linux-tdep.c: Ditto.
	* score-tdep.c: Ditto.
	* sh-tdep.c: Ditto.
	* sparc-tdep.c: Ditto.
	* sparc-tdep.h: Ditto.
	* sparc64-tdep.c: Ditto.
	* spu-tdep.c: Ditto.
	* tic6x-tdep.c: Ditto.
	* tilegx-tdep.c: Ditto.
	* xstormy16-tdep.c: Ditto.
	* gdbarch.c, gdbarch.h: Re-generated.

2015-05-22  Andrew Burgess  <andrew.burgess@embecosm.com>

	* NEWS: Mention 'tui enable' and 'tui disable'.
	* tui/tui.c (tui_enable_command): New function.
	(tui_disable_command): New function.
	(_initialize_tui): New function.

2015-05-21  Andrew Burgess  <andrew.burgess@embecosm.com>

	* tui/tui-regs.c (tui_reg_next_command): Use NULL not 0.

2015-05-21  Andrew Burgess  <andrew.burgess@embecosm.com>

	* tui/tui-layout.c (tui_set_layout_for_display_command): Ensure
	buf_ptr is freed.

2015-05-21  Andrew Burgess  <andrew.burgess@embecosm.com>

	* tui/tui-layout.c (tui_layout_command): Move call to tui_enable
	into ...
	(tui_set_layout_for_display_command): ...here, before calling
	tui_set_layout.  Only set the layout if gdb has not already
	entered the TUI_FAILURE state.

2015-05-21  Andrew Burgess  <andrew.burgess@embecosm.com>

	* tui/tui-layout.c (layout_completer): New function.
	(_initialize_tui_layout): Set completer on layout command.

2015-05-21  Andrew Burgess  <andrew.burgess@embecosm.com>

	* tui/tui-layout.c (tui_set_layout): Remove
	tui_register_display_type parameter.  Remove all checking of this
	parameter, and reindent function.  Update header comment.
	(tui_set_layout_for_display_command): Rename to...
	(tui_set_layout_by_name): ...this, and don't check for different
	register class types, don't pass a tui_register_display_type to
	tui_set_layout.  Update header comment.
	(layout_names): Remove register set specific names.
	* tui/tui-layout.h (tui_set_layout): Remove
	tui_register_display_type parameter.
	* tui/tui.c (tui_rl_change_windows): Don't pass a
	tui_register_display_type to tui_set_layout.
	(tui_rl_delete_other_windows): Likewise.
	(tui_enable): Likewise.
	* tui/tui-data.h (TUI_FLOAT_REGS_NAME): Remove.
	(TUI_FLOAT_REGS_NAME_LOWER): Remove.
	(TUI_GENERAL_REGS_NAME): Remove.
	(TUI_GENERAL_REGS_NAME_LOWER): Remove.
	(TUI_SPECIAL_REGS_NAME): Remove.
	(TUI_SPECIAL_REGS_NAME_LOWER): Remove.
	(TUI_GENERAL_SPECIAL_REGS_NAME): Remove.
	(TUI_GENERAL_SPECIAL_REGS_NAME_LOWER): Remove.
	(enum tui_register_display_type): Remove.
	(struct tui_layout_def): Remove regs_display_type and
	float_regs_display_type fields.
	(struct tui_data_info): Remove regs_display_type field.
	(tui_layout_command): Use new name for
	tui_set_layout_for_display_command.
	* tui/tui-data.c (layout_def): Don't initialise removed fields.
	(tui_clear_win_detail): Don't initialise removed fields of
	win_info.
	* tui/tui-regs.c (tui_show_registers): Use new name for
	tui_set_layout_for_display_command.
	* tui/tui.h (tui_set_layout_for_display_command): Rename
	declaration to...
	(tui_set_layout_by_name): ...this.
	* printcmd.c (display_command): Remove tui related layout call,
	and reindent.

2015-05-20  Joel Brobecker  <brobecker@adacore.com>

	* infrun.c (handle_inferior_event_1): Renames handle_inferior_event.
	(handle_inferior_event): New function.

2015-05-20  Joel Brobecker  <brobecker@adacore.com>

	* ada-lang.c (to_fixed_array_type): Rename local variable
	typename into type_name.

2015-05-19  Jan Kratochvil  <jan.kratochvil@redhat.com>

	Fix ASAN crash for gdb.compile/compile.exp.
	* infcall.c (call_function_by_hand_dummy): Use xstrdup for NAME.

2015-05-19  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* compile/compile-c-symbols.c (convert_symbol_sym, gcc_convert_symbol)
	(gcc_symbol_address): Change gdb_stdout to gdb_stdlog.
	* compile/compile-object-load.c (setup_sections, compile_object_load):
	Likewise.
	* compile/compile.c (compile_to_object): Likewise.

2015-05-16  Doug Evans  <xdje42@gmail.com>

	* NEWS: Mention support for unbuffered Guile memory ports.
	* scm-ports.c (ioscm_memory_port): Update comments on end, size.
	(ioscm_lseek_address): Improve overflow calculation.
	(gdbscm_memory_port_fill_input): Add assert.
	(gdbscm_memory_port_write): Handle unbuffered ports.
	Handle large writes identical to Guile's fport_write.
	(gdbscm_memory_port_seek): Fix seeking past end check.
	(gdbscm_memory_port_close): Handle closing unbuffered port.
	(ioscm_parse_mode_bits): Recognize "0" for unbuffered ports.
	(ioscm_init_memory_port): Handle unbuffered ports.
	(ioscm_reinit_memory_port): Ditto.
	(ioscm_init_memory_port): Update size calculation.
	(gdbscm_open_memory): Support zero sized ports.

2015-05-16  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* compile/compile-object-load.c (get_out_value_type): Fix uninitialized
	variable compiler warnings.

2015-05-16  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* compile/compile-object-load.c (get_out_value_type): Fix returned type.

2015-05-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
	    Phil Muldoon  <pmuldoon@redhat.com>

	* NEWS (Changes since GDB 7.9): Add compile print.
	* compile/compile-c-support.c (add_code_header, add_code_footer)
	(c_compute_program): Add COMPILE_I_PRINT_ADDRESS_SCOPE and
	COMPILE_I_PRINT_VALUE_SCOPE.
	* compile/compile-internal.h (COMPILE_I_PRINT_OUT_ARG_TYPE)
	(COMPILE_I_PRINT_OUT_ARG, COMPILE_I_EXPR_VAL, COMPILE_I_EXPR_PTR_TYPE):
	New.
	* compile/compile-object-load.c: Include block.h.
	(get_out_value_type): New function.
	(compile_object_load): Handle COMPILE_I_PRINT_ADDRESS_SCOPE and
	COMPILE_I_PRINT_VALUE_SCOPE.  Set compile_module's OUT_VALUE_ADDR and
	OUT_VALUE_TYPE.
	* compile/compile-object-load.h (struct compile_module): Add fields
	out_value_addr and out_value_type.
	* compile/compile-object-run.c: Include valprint.h and compile.h.
	(struct do_module_cleanup): Add fields out_value_addr and
	out_value_type.
	(do_module_cleanup): Handle COMPILE_I_PRINT_ADDRESS_SCOPE and
	COMPILE_I_PRINT_VALUE_SCOPE.
	(compile_object_run): Propagate out_value_addr and out_value_type.
	Pass OUT_VALUE_ADDR.
	* compile/compile.c: Include valprint.h.
	(compile_print_value, compile_print_command): New functions.
	(eval_compile_command): Handle failed COMPILE_I_PRINT_ADDRESS_SCOPE.
	(_initialize_compile): Update compile code help text.  Install
	compile_print_command.
	* compile/compile.h (compile_print_value): New prototype.
	* defs.h (enum compile_i_scope_types): Add
	COMPILE_I_PRINT_ADDRESS_SCOPE and COMPILE_I_PRINT_VALUE_SCOPE.

2015-05-16  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* compile/compile-object-load.c (get_regs_type): Add parameter func_sym.
	Rely on its parameter count.
	(compile_object_load): Replace lookup_minimal_symbol_text by
	lookup_global_symbol_from_objfile.  Verify FUNC_SYM.  Set it in the
	return value.
	* compile/compile-object-load.h (struct compile_module): Replace
	func_addr by func_sym.
	* compile/compile-object-run.c: Include block.h.
	(compile_object_run): Reset module variable after it is freed.  Use
	FUNC_SYM instead of FUNC_ADDR.  Rely on it.

2015-05-16  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* compile/compile-c-support.c (print_one_macro): Use #ifndef.
	(generate_register_struct): Use __gdb_uintptr for TYPE_CODE_PTR.
	(c_compute_program): Call generate_register_struct after typedefs.
	* compile/compile-loc2c.c (push, pushf_register_address)
	(pushf_register): Cast to GCC_UINTPTR.
	(do_compile_dwarf_expr_to_c): Use unused attribute.  Add space after
	type.  Use GCC_UINTPTR instead of void *.  Remove excessive cast.
	(compile_dwarf_expr_to_c): Use GCC_UINTPTR instead of void *.
	* compile/compile.c (_initialize_compile): Enable warnings for
	COMPILE_ARGS.

2015-05-16  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* cli/cli-script.c (execute_control_command): Update
	eval_compile_command caller.
	* compile/compile-object-load.c (compile_object_load): Add parameters
	scope and scope_data.  Set them.
	* compile/compile-object-load.h (struct compile_module): Add fields
	scope and scope_data.
	(compile_object_load): Add parameters scope and scope_data.
	* compile/compile-object-run.c (struct do_module_cleanup): Add fields
	scope and scope_data.
	(compile_object_run): Propagate the fields scope and scope_data.
	* compile/compile.c (compile_file_command, compile_code_command):
	Update eval_compile_command callers.
	(eval_compile_command): Add parameter scope_data.  Pass it plus scope.
	* compile/compile.h (eval_compile_command): Add parameter scope_data.
	* defs.h (struct command_line): Add field scope_data.

2015-05-16  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* printcmd.c (struct format_data): Move it to valprint.h.
	(print_command_parse_format, print_value): New functions from ...
	(print_command_1): ... here.  Call them.
	* valprint.h (struct format_data): Move it here from printcmd.c.
	(print_command_parse_format, print_value): New declarations.

2015-05-16  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* compile/compile-object-load.c (compile_object_load): Add
	COMPILE_DEBUG message.

2015-05-15  Jerome Guitton  <guitton@adacore.com>

	* ada-lang.c (ada_value_ptr_subscript): Use enum position of
	index to get element instead of enum value.
	(ada_value_slice_from_ptr, ada_value_slice): Use enum position
	of index to compute length, but enum values to compute bounds.
	(ada_array_length): Use enum position of index instead of enum value.
	(pos_atr): Move position computation to...
	(ada_evaluate_subexp): Use enum values to compute bounds.
	* gdbtypes.c (discrete_position): ...this new function.
	* gdbtypes.h (discrete_position): New function declaration.
	* valprint.c (val_print_array_elements): Call discrete_position
	to handle array indexed by non-contiguous enumeration types.

2015-05-15  Jerome Guitton  <guitton@adacore.com>

	* ada-lang.c (find_parallel_type_by_descriptive_type):
	Go through typedefs during lookup.
	(to_fixed_array_type): Add support for non-bit packed arrays
	as variable-length fields.

2015-05-15  Pedro Alves  <palves@redhat.com>
	    Simon Marchi  <simon.marchi@ericsson.com>

	* event-loop.c (gdb_notifier) <next_file_handler,
	next_poll_fds_index>: New fields.
	(get_next_file_handler_to_handle_and_advance): New function.
	(delete_file_handler): If deleting the next file handler to
	handle, advance to the next file handler.
	(gdb_wait_for_event): Bail early if no event fired.  Poll file
	handlers in round-robin fashion.

2015-05-15  Pedro Alves  <palves@redhat.com>

	* linux-tdep.c (linux_find_memory_regions_full): Rename local
	'private' to 'priv'.

2015-05-15  Pedro Alves  <palves@redhat.com>

	* nat/linux-nat.h: Include "target/waitstatus.h".

2015-05-15  Yuanhui Zhang  <asmwarrior@gmail.com>

	* python/py-unwind.c (struct reg_info): Move out of ...
	(struct cached_frame_info): ... this scope.
	(pending_frame_object_type, unwind_info_object_type): Make extern.

2015-05-15  Joel Brobecker  <brobecker@adacore.com>

	* ada-lang.c (ada_value_primitive_packed_val): Make sure
	accumSize is never negative.

2015-05-14  Patrick Palka  <patrick@parcs.ath.cx>

	* tui/tui-command.c: Remove include of <ctype.h>.
	(tui_dispatch_ctrl_char): Remove workaround for xterm terminals.

2015-05-13  Martin Galvan  <martin.galvan@tallertechnologies.com>

	* dwarf2read.c (die_needs_namespace): Return 1 for
	DW_TAG_inlined_subroutine.

2015-05-13  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* regcache.c (regcache_cpy_no_passthrough): New declaration.
	(regcache_cpy_no_passthrough): Make it static, add function comment.
	* regcache.h (regcache_dup, regcache_cpy): Reduce/update their comment.
	(regcache_cpy_no_passthrough): Remove declaration.

2015-05-13  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* gdbthread.h (struct thread_control_state): Update comment for
	proceed_to_finish.
	* infcall.c (run_inferior_call): Update comment about
	proceed_to_finish.
	* infcmd.c (get_return_value): Update comment about stop_registers.
	(finish_forward): Update comment about proceed_to_finish.
	* infrun.c (stop_registers): Remove.
	(clear_proceed_status, normal_stop): Remove stop_registers handling.
	* infrun.h (stop_registers): Remove.

2015-05-13  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* infcall.c (struct dummy_frame_context_saver)
	(dummy_frame_context_saver_data_free, dummy_frame_context_saver_dtor)
	(dummy_frame_context_saver_drop, dummy_frame_context_saver_cleanup)
	(dummy_frame_context_saver_get_regs, dummy_frame_context_saver_setup):
	New.
	(call_function_by_hand_dummy): Move discard_cleanups of
	inf_status_cleanup before dummy_frame_push.  Call
	dummy_frame_context_saver_setup and prepare context_saver_cleanup.
	Use dummy_frame_context_saver_get_regs instead of stop_registers.
	* infcall.h (struct dummy_frame_context_saver)
	(dummy_frame_context_saver_drop, dummy_frame_context_saver_cleanup)
	(dummy_frame_context_saver_get_regs, dummy_frame_context_saver_setup):
	New declarations.
	* infcmd.c: Include infcall.h.
	(get_return_value): Add parameter ctx_saver, use it instead of
	stop_registers.
	(print_return_value): Add parameter ctx_saver, pass it.
	(struct finish_command_continuation_args): Add field ctx_saver.
	(finish_command_continuation): Update print_return_value caller.
	(finish_command_continuation_free_arg): Free also ctx_saver.
	(finish_forward): Call dummy_frame_context_saver_setup.
	* inferior.h (struct dummy_frame_context_saver): New declaration.
	(get_return_value): Add parameter ctx_saver.
	* python/py-finishbreakpoint.c (bpfinishpy_pre_stop_hook): Update
	get_return_value caller.

2015-05-13  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* dummy-frame.c (struct dummy_frame_dtor_list): New.
	(struct dummy_frame): Replace dtor and dtor_data by dtor_list.
	(remove_dummy_frame): Process dtor_list.
	(pop_dummy_frame): Process dtor_list.
	(register_dummy_frame_dtor): Maintain dtor_list.
	(find_dummy_frame_dtor): Handle dtor_list.
	* dummy-frame.h (register_dummy_frame_dtor, find_dummy_frame_dtor):
	Update comments.

2015-05-13  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* compile/compile-object-run.c (do_module_cleanup): Add parameter
	registers_valid.
	(compile_object_run): Update do_module_cleanup caller.
	* dummy-frame.c: Include infcall.h.
	(struct dummy_frame): Update dtor comment.
	(remove_dummy_frame): Call dtor.
	(pop_dummy_frame): Update dtor caller.
	* dummy-frame.h (dummy_frame_dtor_ftype): Add parameter
	registers_valid.

2015-05-13  Joel Brobecker  <brobecker@adacore.com>

	GDB 7.9.1 released.

2015-05-13  Joel Brobecker  <brobecker@adacore.com>

	* NEWS: Create "Changes in GDB 7.9.1" section.  Move news about
	Xmethods now being able to specify a result type to that new
	sectioin.

2015-05-13  Patrick Palka  <patrick@parcs.ath.cx>

	* tui/tui-win.c (tui_async_resize_screen): Clear win_resized
	first before resizing the window.
	* tui/tui.c (tui_enable): Likewise.

2015-05-13  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* dummy-frame.c (struct dummy_frame): Use proper typedef for dtor.
	* dummy-frame.h (dummy_frame_dtor_ftype): Add its comment.
	* infcall.c (call_function_by_hand_dummy): Use proper typedef for
	dummy_dtor parameter.
	* infcall.h: Include dummy-frame.h.
	(call_function_by_hand_dummy_dtor_ftype): Remove.
	(call_function_by_hand_dummy): Use proper typedef for dummy_dtor
	parameter.

2015-05-13  Patrick Palka  <patrick@parcs.ath.cx>

	PR gdb/17820
	* top.c (history_size_setshow_var): Change type to signed.
	Initialize to -2.  Update documentation.
	(set_readline_history_size): Define.
	(set_history_size_command): Use it.  Remove logic for handling
	out-of-range sizes.
	(init_history): Use set_readline_history_size().  Test for a
	value of -2 instead of 0 when determining whether to set a
	default history size.
	(init_main): Decode the argument of the "size" command as a
	zuinteger_unlimited.

2015-05-12  Doug Evans  <dje@google.com>

	* dwarf2read.c (struct file_entry): Tweak comments.
	(get_debug_line_section): Tweak comments.

2015-05-12  Don Breazeal  <donb@codesourcery.com>

	* NEWS: Announce fork support in the RSP and support
	for fork debugging in extended mode.

2015-05-12  Don Breazeal  <donb@codesourcery.com>

	* remote.c (remote_insert_fork_catchpoint): New function.
	(remote_remove_fork_catchpoint): New function.
	(remote_insert_vfork_catchpoint): New function.
	(remote_remove_vfork_catchpoint): New function.
	(pending_fork_parent_callback): New function.
	(remove_new_fork_child): New function.
	(remote_update_thread_list): Call remote_notif_get_pending_events
	and remove_new_fork_child.
	(extended_remote_kill): Kill fork child when killing the
	parent before follow_fork completes.
	(init_extended_remote_ops): Initialize target vector with
	new fork catchpoint functions.

2015-05-12  Don Breazeal  <donb@codesourcery.com>

	* remote.c (remove_vfork_event_p): New function.
	(remote_follow_fork): Add vfork event type to event checking.
	(remote_parse_stop_reply): New stop reasons "vfork" and
	"vforkdone" for RSP 'T' Stop Reply Packet.

2015-05-12  Don Breazeal  <donb@codesourcery.com>

	* linux-nat.c (linux_nat_ptrace_options): New function.
	(linux_init_ptrace, wait_lwp, linux_nat_filter_event):
	Call linux_nat_ptrace_options and use different argument to
	linux_enable_event_reporting.
	(_initialize_linux_nat): Delete call to
	linux_ptrace_set_additional_flags.
	* nat/linux-ptrace.c (current_ptrace_options): Rename to
	supported_ptrace_options.
	(additional_flags): Delete variable.
	(linux_check_ptrace_features): Use supported_ptrace_options.
	(linux_test_for_tracesysgood, linux_test_for_tracefork):
	Likewise, and remove additional_flags check.
	(linux_enable_event_reporting): Change 'attached' argument to
	'options'.  Use supported_ptrace_options.
	(ptrace_supports_feature): Change comment.  Use
	supported_ptrace_options.
	(linux_ptrace_set_additional_flags): Delete function.
	* nat/linux-ptrace.h (linux_ptrace_set_additional_flags):
	Delete function prototype.
	* remote.c (remote_fork_event_p): New function.
	(remote_detach_pid): New function.
	(remote_detach_1): Call remote_detach_pid, don't mourn inferior
	if doing detach-on-fork.
	(remote_follow_fork): New function.
	(remote_parse_stop_reply): Handle new "T" stop reason "fork".
	(remote_pid_to_str): Print "process" strings for pid/0/0 ptids.
	(init_extended_remote_ops): Initialize to_follow_fork.

2015-05-12  Don Breazeal  <donb@codesourcery.com>

	* nat/linux-ptrace.c (linux_check_ptrace_features): Change
	from static to extern.
	* nat/linux-ptrace.h (linux_check_ptrace_features): Declare.
	* remote.c (anonymous enum): <PACKET_fork_event_feature,
	* PACKET_vfork_event_feature>: New enumeration constants.
	(remote_protocol_features): Add table entries for new packets.
	(remote_query_supported): Add new feature queries to qSupported
	packet.

2015-05-12  Gary Benson <gbenson@redhat.com>

	* remote.c (remote_add_inferior): Call exec_file_locate_attach
	for fake PIDs as well as real ones.
	(remote_pid_to_exec_file): Send empty annex if PID is fake.

2015-05-09  Siva Chandra Reddy  <sivachandra@google.com>

	* NEWS (Python Scripting): Mention the new gdb.Value methods.
	* python/py-value.c (valpy_reference_value): New function.
	(valpy_const_value): Likewise.
	(value_object_methods): Add new methods.
	* value.c (make_cv_value): New function.
	* value.h (make_cv_value): Declare.

2015-05-08  Yao Qi  <yao@codesourcery.com>
	    Sandra Loosemore  <sandra@codesourcery.com>

	* dwarf2read.c (setup_type_unit_groups): Do NULL pointer check
	to 'lh->include_dirs' before accessing to it.
	(psymtab_include_file_name): Likewise.
	(dwarf_decode_lines_1): Likewise.
	(dwarf_decode_lines): Likewise.
	(file_file_name): Likewise.

2015-05-08  Sandra Loosemore  <sandra@codesourcery.com>

	* nios2-linux-tdep.c (NIOS2_SIGRETURN_TRAMP_ADDR): Define.
	(NIOS2_SIGRETURN_REGSAVE_OFFSET): Define.
	(nios2_linux_rt_sigreturn_init): Adjust base address of
	register save area.

2015-05-08  Sandra Loosemore  <sandra@codesourcery.com>

	* nios2-tdep.c (nios2_breakpoint_from_pc): Revert to using
	"trap 31" as the breakpoint instruction on all targets.

2015-05-08  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* infcmd.c (print_return_value): Remove unused declaration.

2015-05-08  Joel Brobecker  <brobecker@adacore.com>

	* dwarf2read.c (attr_to_dynamic_prop)
	<DW_AT_data_member_location>: Use read_type_die isntead of
	get_die_type.

2015-05-08  Joel Brobecker  <brobecker@adacore.com>

	* ada-lang.c (ada_convert_actual): Add handling of formals
	passed inside an aligner type.

2015-05-08  Joel Brobecker  <brobecker@adacore.com>

	* copyright.py (NOT_FSF_LIST): Remove sim/erc32 entries.

2015-05-08  Siva Chandra Reddy  <sivachandra@google.com>

	PR python/18291
	* python/lib/gdb/command/xmethods.py (print_xm_info): Fix typo.
	Print xmethod matcher status.

2015-05-08  Andreas Arnez  <arnez@linux.vnet.ibm.com>

	* s390-linux-nat.c (fill_gregset): Avoid relying on the PSWA
	register in the regcache when treating the PSWM register, and vice
	versa.

2015-05-07  Gary Benson <gbenson@redhat.com>

	* linux-thread-db.c (struct thread_db_info)
	<td_ta_map_id2thr_p>: Remove field.
	(try_thread_db_load_1): Remove initialization for the above.

2015-05-07  Gary Benson <gbenson@redhat.com>

	* linux-thread-db.c (struct thread_db_info)
	<td_thr_validate_p>: Remove field.
	(try_thread_db_load_1): Remove initialization for the above.

2015-05-06  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* compile/compile-object-load.c (compile_object_load): Support
	mst_text_gnu_ifunc.

2015-05-06  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* compile/compile.c (compile_to_object): Make the cmd_string parameter
	const.  Use new variables for the const compatibility.
	(eval_compile_command): Make the cmd_string parameter const.
	* compile/compile.h (eval_compile_command): Make the cmd_string
	parameter const.

2015-05-06  Joel Brobecker  <brobecker@adacore.com>

	* defs.h (deprecated_init_ui_hook): Delete.  Remove associated
	comment.
	* top.c (deprecated_init_ui_hook): Delete.
	(gdb_init): Remove handling of deprecated_init_ui_hook.
	* interps.c (clear_interpreter_hooks): Remove handling of
	deprecated_init_ui_hook.
	* main.c (captured_main): Update comment.

2015-05-06  Joel Brobecker  <brobecker@adacore.com>

	* solib.c (_initialize_solib): Add "info dll" alias creation.
	* windows-nat.c (set_windows_aliases): Delete.
	(_initialize_windows_nat): Remove deprecated_init_ui_hook
	assignment.
	* NEWS: Add news entry about "info dll" now being available
	on all platforms.

2015-05-05  Joel Brobecker  <brobecker@adacore.com>

	* ada-lang.c (value_assign_to_component): Reformat and improve
	documentation. Remove all trailing spaces.

2015-05-05  Joel Brobecker  <brobecker@adacore.com>

	* inline-frame.c (inline_frame_sniffer, skip_inline_frames):
	Stop counting inlined frames as soon as an out-of-line function
	is found.

2014-05-05  Pierre-Marie de Rodat  <derodat@adacore.com>

	* dwarf2read.c (inherit_abstract_dies): Skip
	DW_TAG_GNU_call_site dies while inheriting children of an
	abstract DIE into a scope.
	(read_lexical_block_scope): Inherit abstract DIE's for
	lexical scopes.

2015-05-05  Joel Brobecker  <brobecker@adacore.com>

	* ada-valprint.c (val_print_packed_array_elements): Delete
	variable "len".  Add a type-length check when comparing two
	consecutive elements of the array.  Use the element's actual
	length in call to value_contents_eq.
	* ada-lang.c (ada_value_primitive_packed_val): Always return
	a value whose type has been resolved.

2015-05-05  Joel Brobecker  <brobecker@adacore.com>

	* ada-lang.c (ada_value_primitive_packed_val): Recompute
	BIT_SIZE and LEN if the size of the resolved type is smaller
	than BIT_SIZE * HOST_CHAR_BIT.

2015-05-05  Joel Brobecker  <brobecker@adacore.com>

	* ada-lang.c (ada_value_primitive_packed_val): Use a more
	correct address in call to value_at.  Adjust call to
	value_address accordingly.

2015-05-05  Joel Brobecker  <brobecker@adacore.com>

	* ada-valprint.c (ada_val_print_1): Resolve TYPE before trying
	to print it.

2015-05-05  Joel Brobecker  <brobecker@adacore.com>

	* dwarf2loc.h (struct property_addr_info): Add "valaddr" field.
	* dwarf2loc.c (dwarf2_evaluate_property): Add handling of
	pinfo->valaddr.
	* gdbtypes.h (resolve_dynamic_type): Add "valaddr" parameter.
	* gdbtypes.c (resolve_dynamic_struct): Set pinfo.valaddr.
	(resolve_dynamic_type_internal): Set pinfo.valaddr.
	Add handling of addr_stack->valaddr.
	(resolve_dynamic_type): Add "valaddr" parameter.
	Set pinfo.valaddr field.
	* ada-lang.c (ada_discrete_type_high_bound): Update call to
	resolve_dynamic_type.
	(ada_discrete_type_low_bound): Likewise.
	* findvar.c (default_read_var_value): Likewise.
	* value.c (value_from_contents_and_address): Likewise.

2015-05-05  Joel Brobecker  <brobecker@adacore.com>

	* gdbtypes.c (resolve_dynamic_array): Use
	create_array_type_with_stride instead of create_array_type.

2015-04-30  DJ Delorie  <dj@redhat.com>

	* rl78-tdep.c (rl78_analyze_prologue): Pass RL78_ISA_DEFAULT to
	rl78_decode_opcode

2015-04-29  Doug Evans  <dje@google.com>

	PR python/18285
	* NEWS: Document new gdb.XMethodWorker.get_result_type method.
	* eval.c (evaluate_subexp_standard) <OP_FUNCALL>: Handle
	EVAL_AVOID_SIDE_EFFECTS for xmethods.
	* extension-priv.h (struct extension_language_ops)
	<get_xmethod_result_type>: New member.
	* extension.c (get_xmethod_result_type): New function.
	* extension.h (get_xmethod_result_type): Declare.
	* python/py-xmethods.c (get_result_type_method_name): New static
	global.
	(py_get_result_type_method_name): Ditto.
	(gdbpy_get_xmethod_result_type): New function.
	(gdbpy_initialize_xmethods): Initialize py_get_result_type_method_name.
	* python/python-internal.h (gdbpy_get_xmethod_result_type): Declare.
	* python/python.c (python_extension_ops): Add
	gdbpy_get_xmethod_result_type.
	* python/lib/gdb/xmethod.py (XMethodWorker): Add get_result_type.
	* valarith.c (value_x_binop): Handle EVAL_AVOID_SIDE_EFFECTS for
	xmethods.
	(value_x_unop): Ditto.
	* value.c (result_type_of_xmethod): New function.
	* value.h (result_type_of_xmethod): Declare.

2015-04-29  Gary Benson <gbenson@redhat.com>

	* solib.c (solib_find_1): Allow fd argument to be NULL.
	(exec_file_find): Update comment.
	(solib_find): Likewise.
	* exec.c (exec_file_locate_attach): Use NULL as fd
	argument to exec_file_find to avoid having to close
	the opened file.
	* infrun.c (follow_exec): Likewise.

2015-04-28  Doug Evans  <dje@google.com>

	PR python/18299
	* python/lib/gdb/printing.py (register_pretty_printer): Handle
	name or __name__ attributes.  Handle gdb module as first argument.

2015-04-28  Doug Evans  <dje@google.com>

	PR python/18089
	* python/py-prettyprint.c (print_children): Verify result of children
	iterator.  Provide better error message.
	* python/python-internal..h (gdbpy_print_python_errors_p): Declare.
	* python/python.c (gdbpy_print_python_errors_p): New function.

2015-04-28  Doug Evans  <dje@google.com>

	* gdbtypes.h (struct cplus_struct_type) <n_baseclasses>: Fix comment.

2015-04-28  Sasha Smundak  <asmundak@google.com>

	* NEWS: Mention gdb.Type.optimized_out method.
	* python/py-type.c (typy_optimized_out):  New function.

2015-04-28  John Baldwin  <jhb@FreeBSD.org>

	* fbsd-nat.c: Include "gdb_wait.h" instead of <sys/wait.h>.

2015-04-28  Patrick Palka  <patrick@parcs.ath.cx>

	* utils.c (init_page_info): Set rl_catch_sigwinch to zero.
	(initialize_utils): Move call of init_page_info() to ...
	* top.c (gdb_init): ... here.

2015-04-28  Patrick Palka  <patrick@parcs.ath.cx>

	* tui/tui-win.c (tui_sigwinch_handler): Remove now-stale comment.
	(tui_sigwinch_handler): Still update our idea of
	the terminal's width and height even when TUI is not active.

2015-04-28  Patrick Palka  <patrick@parcs.ath.cx>

	* utils.h (set_screen_width_and_height): Declare.
	* utils.c (set_screen_width_and_height): Define.
	* tui/tui-win.c (tui_update_gdb_sizes): Use it.

2015-04-28  Gary Benson <gbenson@redhat.com>

	* infrun.c (solist.h): New include.
	(follow_exec): Use exec_file_find to prefix execd_pathname
	with gdb_sysroot.

2015-04-28  Patrick Palka  <patrick@parcs.ath.cx>

	* tui/tui-source.c (tui_set_source_content): Avoid calling
	strcpy() when offset is 0.

2015-04-28  Patrick Palka  <patrick@parcs.ath.cx>

	PR gdb/18155
	* tui/tui-data.c (tui_free_window): Don't free the locator
	window when passed an SRC_WIN or a DISASSEM_WIN.

2015-04-28  Patrick Palka  <patrick@parcs.ath.cx>

	* tui/tui-data.h (struct tui_win_element): Forward-declare.
	(tui_win_content): Move declaration.
	(struct tui_gen_win_info): Give 'content' field the
	type tui_win_content.
	* tui/tui-data.c (init_content_element): Remove redundant and
	erroneous casts.
	(tui_add_content_elements): Remove erroneous cast.
	* tui/tui-disasm.c (tui_set_disassem_content): Remove redundant
	casts.
	(tui_get_begin_asm_address): Likewise.
	* tui/tui-regs.c (tui_show_registers): Likewise.
	(tui_show_register_group): Likewise.
	(tui_display_registers_from): Likewise.
	(tui_check_register_values): Likewise.
	* tui/tui-source.c (tui_set_source_content): Likewise.
	(tui_set_source_content_nil): Likewise.
	(tui_source_is_displayed): Likewise.
	* tui/tui-stack.c (tui_show_locator_content): Likewise.
	(tui_set_locator_fullname): Likewise.
	(tui_set_locator_info): Likewise.
	(tui_show_frame_info): Likewise.
	* tui/tui-winsource.c (tui_clear_source_content): Likewise.
	(tui_show_source_line): Likewise.
	(tui_horizontal_source_scroll): Likewise.
	(tui_update_breakpoint_info): Likewise.
	(tui_set_exec_info_content): Likewise.
	(tui_show_exec_info_content): Likewise.
	(tui_alloc_source_buffer): Likewise.
	(tui_line_is_displayed): Likewise.
	(tui_addr_is_displayed): Likewise.

2015-04-27  John Baldwin  <jhb@FreeBSD.org>

	* fbsd-nat.c: (fbsd_wait) [PL_FLAG_EXEC]: Report TARGET_WAITKIND_EXECD
	event if PL_FLAG_EXEC is set.
	[PL_FLAG_EXEC] (fbsd_insert_exec_catchpoint): New function.
	[PL_FLAG_EXEC] (fbsd_remove_exec_catchpoint): New function.
	(fbsd_nat_add_target) [PL_FLAG_EXEC]: Set
	"to_insert_exec_catchpoint" to "fbsd_insert_exec_catchpoint".
	Set "to_remove_exec_catchpoint" to "fbsd_remove_exec_catchpoint".

2015-04-27  John Baldwin  <jhb@FreeBSD.org>

	* fbsd-nat.c: [PT_LWPINFO] New variable super_wait.
	[TDP_RFPPWAIT] New variable fbsd_pending_children.
	[TDP_RFPPWAIT] (fbsd_remember_child): New function.
	[TDP_RFPPWAIT] (fbsd_is_child_pending): New function.
	[TDP_RFPPWAIT] (fbsd_fetch_kinfo_proc): New function.
	[PT_LWPINFO] (fbsd_wait): New function.
	[TDP_RFPPWAIT] (fbsd_follow_fork): New function.
	[TDP_RFPPWAIT] (fbsd_insert_fork_catchpoint): New function.
	[TDP_RFPPWAIT] (fbsd_remove_fork_catchpoint): New function.
	[TDP_RFPPWAIT] (fbsd_insert_vfork_catchpoint): New function.
	[TDP_RFPPWAIT] (fbsd_remove_vfork_catchpoint): New function.
	[TDP_RFPPWAIT] (fbsd_enable_follow_fork): New function.
	[TDP_RFPPWAIT] (fbsd_post_startup_inferior): New function.
	[TDP_RFPPWAIT] (fbsd_post_attach): New function.
	(fbsd_nat_add_target) [PT_LWPINFO] Set "to_wait" to
	"fbsd_wait".
	[TDP_RFPPWAIT] Set "to_follow_fork" to "fbsd_follow_fork".
	Set "to_insert_fork_catchpoint" to "fbsd_insert_fork_catchpoint".
	Set "to_remove_fork_catchpoint" to "fbsd_remove_fork_catchpoint".
	Set "to_insert_vfork_catchpoint" to "fbsd_insert_vfork_catchpoint".
	Set "to_remove_vfork_catchpoint" to "fbsd_remove_vfork_catchpoint".
	Set "to_post_startup_inferior" to "fbsd_post_startup_inferior".
	Set "to_post_attach" to "fbsd_post_attach".

2015-04-27  John Baldwin  <jhb@FreeBSD.org>

	* fbsd-nat.c (fbsd_pid_to_exec_file): Mark static.
	(fbsd_find_memory_regions): Mark static.
	(fbsd_nat_add_target): New function.
	* fbsd-nat.h: Export fbsd_nat_add_target and remove prototypes for
	fbsd_pid_to_exec_file and fbsd_find_memory_regions.
	* amd64fbsd-nat.c (_initialize_amd64fbsd_nat): Use fbsd_nat_add_target.
	* i386fbsd-nat.c (_initialize_i386fbsd_nat): Likewise.
	* ppcfbsd-nat.c (_initialize_ppcfbsd_nat): Likewise.
	* sparc64fbsd-nat.c (_initialize_sparc64fbsd_nat): Likewise.

2015-04-27  Gary Benson <gbenson@redhat.com>

	* objfiles.c (allocate_objfile): Do not attempt to expand name
	if name is a "target:" filename.
	* auto-load.c (load_auto_scripts_for_objfile): Do not attempt
	to load auto-load scripts for objfiles with "target:" filenames.

2015-04-27  Andreas Arnez  <arnez@linux.vnet.ibm.com>

	* s390-linux-tdep.c: Include "elf/s390.h" and "elf-bfd.h".
	(enum s390_vector_abi_kind): New enum.
	(struct gdbarch_tdep)<vector_abi>: New field.
	(s390_effective_inner_type): Add parameter min_size.  Stop
	unwrapping if the inner type is smaller than min_size.
	(s390_function_arg_float): Adjust call to
	s390_effective_inner_type.
	(s390_function_arg_vector): New function.
	(s390_function_arg_integer): Adjust comment.
	(struct s390_arg_state)<vr>: New field.
	(s390_handle_arg): Add parameter 'is_unnamed'.  Pass vector
	arguments according to vector ABI when appropriate.
	(s390_push_dummy_call): Initialize the argument state's field
	'vr'.  Adjust calls to s390_handle_arg.
	(s390_register_return_value): Handle vector return values.
	(s390_return_value): Apply the "register" return value convention
	to a vector when appropriate.
	(s390_gdbarch_init): Initialize tdep->vector_abi.
	* NEWS: Announce S390 vector ABI support.

2015-04-27  Andreas Arnez  <arnez@linux.vnet.ibm.com>

	* s390-linux-tdep.c (s390_return_value_convention): Remove
	function.  Inline its logic...
	(s390_return_value): ...here.  Instead, move the handling of the
	"register" return value convention...
	(s390_register_return_value): ...here.  New function.

2015-04-27  Andreas Arnez  <arnez@linux.vnet.ibm.com>

	* s390-linux-tdep.c
	(is_float_singleton): Remove function.  Move the "singleton" part
	of the logic...
	(s390_effective_inner_type): ...here.  New function.
	(is_float_like): Remove function.  Inline its logic...
	(s390_function_arg_float): ...here.
	(is_pointer_like, is_integer_like, is_struct_like): Remove
	functions.  Inline their logic...
	(s390_function_arg_integer): ...here.
	(s390_function_arg_pass_by_reference): Remove function.
	(extend_simple_arg): Remove function.
	(alignment_of): Remove function.
	(struct s390_arg_state): New structure.
	(s390_handle_arg): New function.
	(s390_push_dummy_call): Move parameter placement logic to the new
	function s390_handle_arg.  Call it for calculating the stack area
	sizes first, and again for actually writing the parameters.

2015-04-27  Andreas Arnez  <arnez@linux.vnet.ibm.com>

	* s390-linux-tdep.c (is_power_of_two): Add comment.  Return
	  false if the argument is zero.

2015-04-27  Pierre-Marie de Rodat  <derodat@adacore.com>

	* ada-lang.c (template_to_static_fixed_type): Return input type
	when it is already fixed.  Cache the input type itself when not
	creating a static fixed copy.  Make it explicit that we never
	molestate the input type.
	* gdbtypes.c (resolve_dynamic_struct): Reset the
	TYPE_TARGET_TYPE field for resolved copies.

2015-04-27  Joel Brobecker  <brobecker@adacore.com>

	* ada-lang.c (ada_is_tagged_type): Add call to ada_check_typedef.
	(ada_lookup_struct_elt_type): Remove calls to ada_check_typedef.
	(template_to_static_fixed_type): Call ada_check_typedef only
	when necessary.

2015-04-24  Andrew Burgess  <andrew.burgess@embecosm.com>

	* cli/cli-dump.c (srec_dump_command): Add internationalization
	mark ups.
	(ihex_dump_command): Likewise.
	(tekhex_dump_command): Likewise.
	(binary_dump_command): Likewise.
	(binary_append_command): Likewise.

2015-04-24  Andrew Burgess  <andrew.burgess@embecosm.com>

	* cli/cli-dump.c (verilog_cmdlist): New variable.
	(dump_verilog_memory): New function.
	(dump_verilog_value): New function.
	(verilog_dump_command): New function.
	(_initialize_cli_dump): Add new commands to support verilog dump
	format.
	* NEWS: Add entry for "dump verilog".

2015-04-24  Pierre-Marie de Rodat  <derodat@adacore.com>

	* gdbtypes.c (print_gnat_stuff): Do not recurse on the
	descriptive type when there is none.

2015-04-23  Patrick Palka  <patrick@parcs.ath.cx>

	* tui/tui-win.c (tui_async_resize_screen): Call
	rl_resize_terminal().

2015-04-22  Jon Turney  <jon.turney@dronecode.org.uk>

	* windows-nat.c (handle_output_debug_string): Don't change
	current_event.dwThreadId.
	(get_windows_debug_event): Use thread_id, rather than relying on
	current_event.dwThreadId being changed.

2015-04-22  Jon Turney  <jon.turney@dronecode.org.uk>

	* windows-nat.c (windows_continue): Report an error if
	ContinueDebugEvent() fails.

2015-04-16  Jon Turney  <jon.turney@dronecode.org.uk>

	* windows-nat.c (windows_resume): Fix misspelling in debug output.

2015-04-16  Jon Turney  <jon.turney@dronecode.org.uk>

	* windows-nat.c (get_windows_debug_event): Replace retval with
	thread_id throughout.  Update stale comment.

2015-04-16  Jon Turney  <jon.turney@dronecode.org.uk>

	* windows-nat.c (get_windows_debug_event): Don't use ternary
	conditional operator.

2015-04-21  Pierre Muller  <muller@sourceware.org>

	PR pascal/17815
	p-exp.y (yylex): Reorganize code to return the matched pattern
	for a field of this.

2015-04-21  Gary Benson <gbenson@redhat.com>

	* common/fileio.h (fileio_to_host_openflags): New declaration.
	* common/fileio.c (fcntl.h): New include.
	(fileio_to_host_openflags): New function, factored out from...
	* inf-child.c (inf_child_fileio_open_flags_to_host): ...here.
	Single use updated.

2015-04-21  Kevin Buettner  <kevinb@redhat.com>

	* rl78-tdep.c (RL78_SP_ADDR): Define.
	(opc_reg_to_gdb_regnum): New static function.
	(rl78_analyze_prologue): Recognize instructions forming slightly
	more interesting prologues.

2015-04-20  Pierre-Marie de Rodat  <derodat@adacore.com>

	Revert:
	2015-04-03  Pierre-Marie de Rodat  <derodat@adacore.com>
	* gdbtypes.c (is_dynamic_type_internal): Remove special handling of
	TYPE_CODE_REF types so that they are not considered as dynamic
	depending on the referenced type.
	(resolve_dynamic_type_internal): Likewise.

2015-04-20  Pierre-Marie de Rodat  <derodat@adacore.com>

	Revert:
	2015-04-03  Pierre-Marie de Rodat  <derodat@adacore.com>
	* gdbtypes.c (is_dynamic_type_internal): Remove the unused
	"top_level" parameter.
	(resolve_dynamic_type_internal): Remove the unused "top_level"
	parameter.  Update call to is_dynamic_type_internal.
	(is_dynamic_type): Update call to is_dynamic_type_internal.
	(resolve_dynamic_range): Update call to
	resolve_dynamic_type_internal.
	(resolve_dynamic_union): Likewise.
	(resolve_dynamic_struct): Likewise.
	(resolve_dynamic_type): Likewise.

2015-04-19  Gabriel Krisman Bertazi  <gabriel@krisman.be>

	* breakpoint.c (update_dprintf_command_list): Remove duplicated
	xmalloc.

2015-04-20  Thomas Schwinge  <thomas@codesourcery.com>

	* reply_mig_hack.awk: Robustify parsing.

	* reply_mig_hack.awk: Don't bother to declare an intermediate
	function pointer variable.

2015-04-17  Doug Evans  <dje@google.com>

	* solib-svr4.c (svr4_exec_displacement): Rename outer "displacement"
	to "exec_displacement" to avoid confusion with inner use of the name.

2015-04-17  Pedro Alves  <palves@redhat.com>

	* arm-linux-nat.c (arm_linux_can_use_hw_breakpoint): Return zero
	if HW point of TYPE isn't supported.

2015-04-17  Yao Qi  <yao.qi@linaro.org>
	    Pedro Alves  <palves@redhat.com>

	* target.h (target_can_use_hardware_watchpoint): Update comments.
	Remove trailing ";".

2015-04-17  Gary Benson <gbenson@redhat.com>

	* remote.c (remote_add_inferior): New argument try_open_exec.
	If nonzero, attempt to open the inferior's executable file as
	the main executable if no main executable is open already.
	All callers updated.
	* NEWS: Mention that GDB now supports automatic location and
	retrieval of executable + files from remote targets.

2015-04-17  Gary Benson <gbenson@redhat.com>

	* target.h (TARGET_OBJECT_EXEC_FILE): New enum value.
	* remote.c (PACKET_qXfer_exec_file): Likewise.
	(remote_protocol_features): Register the
	"qXfer:exec-file:read" feature.
	(remote_xfer_partial): Handle TARGET_OBJECT_EXEC_FILE.
	(remote_pid_to_exec_file): New function.
	(init_remote_ops): Initialize to_pid_to_exec_file.
	(_initialize_remote): Register new "set/show remote
	pid-to-exec-file-packet" command.
	* NEWS: Announce new qXfer:exec-file:read packet.

2015-04-17  Gary Benson <gbenson@redhat.com>

	* nat/linux-procfs.h (linux_proc_pid_to_exec_file):
	New declaration.
	* nat/linux-procfs.c (linux_proc_pid_to_exec_file):
	New function, factored out from...
	* linux-nat.c (linux_child_pid_to_exec_file): ...here.

2015-04-17  Gary Benson <gbenson@redhat.com>

	* exec.c (solist.h): New include.
	(exec_file_locate_attach): Prefix absolute executable
	paths with gdb_sysroot if set.
	* NEWS: Mention that executable paths may be prepended
	with sysroot.

2015-04-17  Gary Benson <gbenson@redhat.com>

	* solist.h (exec_file_find): New declaration.
	* solib.c (solib_find_1): New function, factored out from...
	(solib_find): ...here.
	(exec_file_find): New function.

2015-04-17  Gary Benson <gbenson@redhat.com>

	* gdbcore.h (exec_file_locate_attach): New declaration.
	* exec.c (exec_file_locate_attach): New function, factored
	out from...
	* infcmd.c (attach_command_post_wait): ...here.

2015-04-17  Mike Frysinger  <vapier@gentoo.org>

	* MAINTAINERS: Add myself for Blackfin/write-after-approval.

2015-04-16  Yao Qi  <yao.qi@linaro.org>

	* infrun.c (maybe_software_singlestep): Declare.
	(displaced_step_fixup): Call maybe_software_singlestep.

2015-04-15  Doug Evans  <dje@google.com>

	* psymtab.c (psym_expand_symtabs_matching): Add QUIT call.

2015-04-15  Doug Evans  <dje@google.com>

	* dwarf2read.c (dw2_expand_symtabs_matching): Add some QUIT calls.

2015-04-15  Simon Marchi  <simon.marchi@ericsson.com>

	* python/lib/gdb/command/unwinders.py: Add parentheses.

2015-04-15  Yao Qi  <yao.qi@linaro.org>

	* arm-linux-tdep.c (arm_linux_copy_svc): Update debug message.

2015-04-15  Yao Qi  <yao.qi@linaro.org>

	* arm-linux-tdep.c (arm_linux_copy_svc): Fix indentation.

2015-04-15  Yao Qi  <yao.qi@linaro.org>

	* arm-linux-tdep.c (arm_linux_cleanup_svc): Use
	dsc->insn_size instead of 4.

2015-04-14  Gary Benson <gbenson@redhat.com>

	* jit.c (mem_bfd_iovec_stat): Zero supplied buffer.
	* minidebug.c (lzma_stat): Likewise.
	* solib-spu.c (spu_bfd_iovec_stat): Likewise.
	* spu-linux-nat.c (spu_bfd_iovec_stat): Likewise.

2015-04-13  Stan Shebs  <stanshebs@google.com>

	* MAINTAINERS: Update my email address.

2015-04-13  John Baldwin  <jhb@FreeBSD.org>

	* amd64-tdep.c (amd64_target_description): New function.
	* amd64-tdep.h: Export amd64_target_description and tdesc_amd64.
	* amd64bsd-nat.c [PT_GETXSTATE_INFO]: New variable amd64bsd_xsave_len.
	(amd64bsd_fetch_inferior_registers) [PT_GETXSTATE_INFO]: Handle
	x86 extended save area.
	(amd64bsd_store_inferior_registers) [PT_GETXSTATE_INFO]: Likewise.
	* amd64bsd-nat.h: Export amd64bsd_xsave_len.
	* amd64fbsd-nat.c (amd64fbsd_read_description): New function.
	(_initialize_amd64fbsd_nat): Set "to_read_description" to
	"amd64fbsd_read_description".
	* amd64fbsd-tdep.c (amd64fbsd_core_read_description): New function.
	(amd64fbsd_supply_xstateregset): New function.
	(amd64fbsd_collect_xstateregset): New function.
	Add "amd64fbsd_xstateregset".
	(amd64fbsd_iterate_over_regset_sections): New function.
	(amd64fbsd_init_abi): Set "xsave_xcr0_offset" to
	"I386_FBSD_XSAVE_XCR0_OFFSET".
	Add "iterate_over_regset_sections" gdbarch method.
	Add "core_read_description" gdbarch method.
	* i386-tdep.c (i386_target_description): New function.
	* i386-tdep.h: Export i386_target_description and tdesc_i386.
	* i386bsd-nat.c [PT_GETXSTATE_INFO]: New variable i386bsd_xsave_len.
	(i386bsd_fetch_inferior_registers) [PT_GETXSTATE_INFO]: Handle
	x86 extended save area.
	(i386bsd_store_inferior_registers) [PT_GETXSTATE_INFO]: Likewise.
	* i386bsd-nat.h: Export i386bsd_xsave_len.
	* i386fbsd-nat.c (i386fbsd_read_description): New function.
	(_initialize_i386fbsd_nat): Set "to_read_description" to
	"i386fbsd_read_description".
	* i386fbsd-tdep.c (i386fbsd_core_read_xcr0): New function.
	(i386fbsd_core_read_description): New function.
	(i386fbsd_supply_xstateregset): New function.
	(i386fbsd_collect_xstateregset): New function.
	Add "i386fbsd_xstateregset".
	(i386fbsd_iterate_over_regset_sections): New function.
	(i386fbsd4_init_abi): Set "xsave_xcr0_offset" to
	"I386_FBSD_XSAVE_XCR0_OFFSET".
	Add "iterate_over_regset_sections" gdbarch method.
	Add "core_read_description" gdbarch method.
	* i386fbsd-tdep.h: New file.

2015-04-11  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* NEWS (Changes since GDB 7.9): Add removed -xdb.
	* breakpoint.c (command_line_is_silent): Remove xdb_commands
	conditional.
	(_initialize_breakpoint): Remove xdb_commands for bc, ab, sb, db, ba
	and lb.
	* cli/cli-cmds.c (_initialize_cli_cmds): Remove xdb_commands for v and
	va.
	* cli/cli-decode.c (find_command_name_length): Remove xdb_commands
	conditional.
	* defs.h (xdb_commands): Remove declaration.
	* f-valprint.c (_initialize_f_valprint): Remove xdb_commands for lc.
	* guile/scm-cmd.c (command_classes): Remove xdb from comment.
	* infcmd.c (run_no_args_command, go_command): Remove.
	(_initialize_infcmd): Remove xdb_commands for S, go, g, R and lr.
	* infrun.c (xdb_handle_command): Remove.
	(_initialize_infrun): Remove xdb_commands for lz and z.
	* main.c (xdb_commands): Remove variable.
	(captured_main): Remove "xdb" from long_options.
	(print_gdb_help): Remove --xdb from help.
	* python/py-cmd.c (gdbpy_initialize_commands): Remove xdb from comment.
	* source.c (_initialize_source): Remove xdb_commands for D, ld, / and ?.
	* stack.c (backtrace_full_command, args_plus_locals_info)
	(current_frame_command): Remove.
	(_initialize_stack): Remove xdb_commands for t, T and l.
	* symtab.c (_initialize_symtab): Remove xdb_commands for lf and lg.
	* thread.c (_initialize_thread): Remove xdb_commands condition.
	* tui/tui-layout.c (tui_toggle_layout_command)
	(tui_toggle_split_layout_command, tui_handle_xdb_layout): Remove.
	(_initialize_tui_layout): Remove xdb_commands for td and ts.
	* tui/tui-regs.c (tui_scroll_regs_forward_command)
	(tui_scroll_regs_backward_command): Remove.
	(_initialize_tui_regs): Remove xdb_commands for fr, gr, sr, +r and -r.
	* tui/tui-win.c (tui_xdb_set_win_height_command): Remove.
	(_initialize_tui_win): Remove xdb_commands for U and w.
	* utils.c (pagination_on_command, pagination_off_command): Remove.
	(initialize_utils): Remove xdb_commands for am and sm.

2015-04-10  Pedro Alves  <palves@redhat.com>

	* infrun.c (displaced_step_fixup): Switch to the event ptid
	earlier.  If the thread stopped for a watchpoint and the
	target/arch has non-continuable watchpoints, cancel the displaced
	step.
	(resume): Don't start a displaced step if in-line step-over info
	is valid.

2015-04-10  Pedro Alves  <palves@redhat.com>

	* infrun.c (displaced_step_in_progress): New function.
	(do_target_resume): Advise target to report all signals if
	displaced stepping.

2015-04-10  Pedro Alves  <palves@redhat.com>

	PR gdb/18216
	* infrun.c (process_event_stop_test): Don't assume a step-resume
	is set if tp->stepped_breakpoint is true.

2015-04-10  Yao Qi  <yao.qi@linaro.org>

	* arm-tdep.c (install_alu_reg): Update comment.
	(thumb_copy_alu_reg): Remove local variable rn.  Update
	debugging message.  Use r2 instead of r1 in the modified
	instruction.

2015-04-10  Pedro Alves  <palves@redhat.com>

	PR gdb/13858
	* amd64-linux-tdep.c (amd64_linux_init_abi_common): Install
	linux_displaced_step_location as gdbarch_displaced_step_location
	hook.
	* arm-linux-tdep.c (arm_linux_init_abi): Likewise.
	* i386-linux-tdep.c (i386_linux_init_abi): Likewise.
	* linux-tdep.c (linux_displaced_step_location): New function,
	based on ppc_linux_displaced_step_location.
	* linux-tdep.h (linux_displaced_step_location): New declaration.
	* ppc-linux-tdep.c (ppc_linux_entry_point_addr): Delete.
	(ppc_linux_inferior_created, ppc_linux_displaced_step_location):
	Delete.
	(ppc_linux_init_abi): Install linux_displaced_step_location as
	gdbarch_displaced_step_location hook, even without Cell/B.E..
	(_initialize_ppc_linux_tdep): Don't install
	ppc_linux_inferior_created as inferior_created observer.
	* s390-linux-tdep.c (s390_gdbarch_init): Install
	linux_displaced_step_location as gdbarch_displaced_step_location
	hook.

2015-04-09  Gary Benson <gbenson@redhat.com>

	* common/common-remote-fileio.h: Rename to...
	* common/fileio.h: ...this.  Update all references.
	(remote_fileio_to_fio_error): Rename to...
	(host_to_fileio_error): ...this.
	(remote_fileio_to_be): Rename to...
	(host_to_bigendian): ...this.  Update all callers.
	(remote_fileio_to_fio_uint): Rename to...
	(host_to_fileio_uint): ...this.  Update all callers.
	(remote_fileio_to_fio_time): Rename to...
	(host_to_fileio_time): ...this.  Update all callers.
	(remote_fileio_to_fio_stat): Rename to...
	(host_to_fileio_stat): ...this.
	Update all references.
	* common/common-remote-fileio.c: Rename to...
	* common/fileio.c: ...this.  Update all references.
	(remote_fileio_to_fio_error): Rename to...
	(host_to_fileio_error): ...this.  Update all callers.
	(remote_fileio_mode_to_target): Rename to...
	(fileio_mode_pack): ...this.  Update all callers.
	(remote_fileio_to_fio_mode): Rename to...
	(host_to_fileio_mode): ...this.  Update all callers.
	(remote_fileio_to_fio_ulong): Rename to...
	(host_to_fileio_ulong): ...this.  Update all callers.
	(remote_fileio_to_fio_stat): Rename to...
	(host_to_fileio_stat): ...this.  Update all callers.

2015-04-09  Andy Wingo  <wingo@igalia.com>

	* guile/scm-frame.c (gdbscm_frame_read_register): New function.
	(frame_functions): Bind gdbscm_frame_read_register to
	frame-read-register.
	* guile/lib/gdb.scm (frame-read-register): Export.

2015-04-09  Gary Benson <gbenson@redhat.com>

	* common/common-remote-fileio.h (remote_fileio_to_fio_error):
	New declaration.
	* common/common-remote-fileio.c (remote_fileio_to_fio_error):
	New function, factored out the named functions below.
	* inf-child.c (gdb/fileio.h): Remove include.
	(common-remote-fileio.h): New include.
	(inf_child_errno_to_fileio_error): Remove function.  Update
	all callers to use remote_fileio_to_fio_error.
	* remote-fileio.c (remote_fileio_errno_to_target): Likewise.

2015-04-09  Andy Wingo  <wingo@igalia.com>

	* MAINTAINERS (Write After Approval): Add Andy Wingo.

2015-04-09  H.J. Lu  <hongjiu.lu@intel.com>

	* acinclude.m4: (GDB_AC_CHECK_BFD): Set ZLIBDIR with $zlibdir.
	Replace $zlibdir with $ZLIBDIR in LDFLAGS.
	* configure: Regenerated.

2015-04-09  Pedro Alves  <palves@redhat.com>

	* gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add strtok_r.
	* gnulib/Makefile.in (aclocal_m4_deps): Add import/m4/strtok_r.m4.
	* gnulib/configure, gnulib/config.in, gnulib/aclocal.m4: Regenerate.
	* gnulib/import/Makefile.am: Update.
	* gnulib/import/Makefile.in: Update.
	* gnulib/import/m4/gnulib-cache.m4: Update.
	* gnulib/import/m4/gnulib-comp.m4: Update.
	* gnulib/import/m4/strtok_r.m4: New file.
	* gnulib/import/strtok_r.c: New file.

2015-04-09  Pedro Alves  <palves@redhat.com>

	* gnulib/update-gnulib.sh (aclocal version check): Filter out
	"called too early to check prototype".

2015-04-08  Sergio Durigan Junior  <sergiodj@redhat.com>

	PR python/16699
	* python/py-cmd.c (cmdpy_completer_helper): Adjust function to not
	use a caching mechanism.  Adjust comments and code to reflect
	that.  Replace 'sizeof' by 'strlen' when fetching 'wordobj'.
	(cmdpy_completer_handle_brkchars): Adjust call to
	cmdpy_completer_helper.  Call Py_XDECREF for 'resultobj'.
	(cmdpy_completer): Likewise.

2015-04-08  Yao Qi  <yao.qi@linaro.org>

	* spu-tdep.c (spu_gdbarch_init): Don't call
	set_gdbarch_cannot_step_breakpoint.

2015-04-07  Sergio Durigan Junior  <sergiodj@redhat.com>

	* linux-tdep.c (decode_vmflags): Initialize 'saveptr'.

2015-04-07  Pedro Alves  <palves@redhat.com>

	* gdbthread.h (ALL_NON_EXITED_THREADS_SAFE): Rename to ...
	(ALL_THREADS_SAFE): ... this, and don't skip exited threads.
	(delete_exited_threads): New declaration.
	* infrun.c (follow_exec): Use ALL_THREADS_SAFE.
	* linux-nat.c (linux_nat_update_thread_list): New function.
	(linux_nat_add_target): Install it.
	* remote.c (remote_update_thread_list): Use ALL_THREADS_SAFE.
	* thread.c (prune_threads): Use ALL_THREADS_SAFE.
	(delete_exited_threads): New function.

2015-04-07  Pedro Alves  <pedro@codesourcery.com>

	* infrun.c (resume) <displaced stepping debug output>: Get the
	leader thread's regcache, not resume_ptid's.

2015-04-06  Doug Evans  <xdje42@gmail.com>

	* symtab.c (hash_symbol_entry): Hash STRUCT_DOMAIN symbols as
	VAR_DOMAIN.
	(symbol_cache_lookup): Clarify use of bsc_ptr, slot_ptr parameters.
	Include symbol domain in debugging output.

2015-04-06  Pedro Alves  <palves@redhat.com>
	    Bernd Edlinger  <bernd.edlinger@hotmail.de>

	* configure.ac: Remove the mingw32-specific stub-termcap.o
	fallback, and instead fallback to the stub termcap on all hosts.
	* configure: Regenerate.
	* stub-termcap.c [!__MINGW32__] (PC, BC, UP): Define as weak
	symbols.

2015-04-03  Pierre-Marie de Rodat  <derodat@adacore.com>

	* gdbtypes.c (is_dynamic_type_internal): Remove the unused
	"top_level" parameter.
	(resolve_dynamic_type_internal): Remove the unused "top_level"
	parameter.  Update call to is_dynamic_type_internal.
	(is_dynamic_type): Update call to is_dynamic_type_internal.
	(resolve_dynamic_range): Update call to
	resolve_dynamic_type_internal.
	(resolve_dynamic_union): Likewise.
	(resolve_dynamic_struct): Likewise.
	(resolve_dynamic_type): Likewise.

2015-04-03  Pierre-Marie de Rodat  <derodat@adacore.com>

	* gdbtypes.c (is_dynamic_type_internal): Remove special handling of
	TYPE_CODE_REF types so that they are not considered as dynamic
	depending on the referenced type.
	(resolve_dynamic_type_internal): Likewise.

2015-04-02  H.J. Lu  <hongjiu.lu@intel.com>

	* Makefile.in (top_srcdir): New.
	* configure: Regenerated.

2015-04-02  Gary Benson <gbenson@redhat.com>

	* NEWS: Announce the new default sysroot of "target:".

2015-04-02  Gary Benson <gbenson@redhat.com>

	* main.c (captured_main): Set gdb_sysroot to "target:"
	if not otherwise set.

2015-04-02  Gary Benson <gbenson@redhat.com>

	* exec.c (exec_file_attach): Support "target:" filenames.

2015-04-02  Gary Benson <gbenson@redhat.com>

	* solib.c (solib_find): Strip "target:" prefix from sysroot
	if accessing local files.

2015-04-02  Gary Benson <gbenson@redhat.com>

	* symfile.c (symfile_bfd_open): Reorder to remove duplicated
	checks and error messages.

2015-04-02  Gary Benson <gbenson@redhat.com>

	* remote.h (REMOTE_SYSROOT_PREFIX): Remove definition.
	(remote_filename_p): Remove declaration.
	(remote_bfd_open): Likewise.
	* remote.c (remote_bfd_iovec_open): Remove function.
	(remote_bfd_iovec_close): Likewise.
	(remote_bfd_iovec_pread): Likewise.
	(remote_bfd_iovec_stat): Likewise.
	(remote_filename_p): Likewise.
	(remote_bfd_open): Likewise.
	* symfile.h (gdb_bfd_open_maybe_remote): Remove declaration.
	* symfile.c (separate_debug_file_exists): Use gdb_bfd_open.
	(gdb_bfd_open_maybe_remote): Remove function.
	(symfile_bfd_open):  Replace remote filename check with
	target filename check.
	(reread_symbols): Use gdb_bfd_open.
	* build-id.c (gdbcore.h): New include.
	(build_id_to_debug_bfd): Use gdb_bfd_open.
	* infcmd.c (attach_command_post_wait): Remove remote filename
	check.
	* solib.c (solib_find): Replace remote-specific handling with
	target-specific handling.  Update comments where necessary.
	(solib_bfd_open): Replace remote-specific handling with
	target-specific handling.
	(gdb_sysroot_changed): New function.
	(_initialize_solib): Call the above when gdb_sysroot changes.
	* windows-tdep.c (gdbcore.h): New include.
	(windows_xfer_shared_library): Use gdb_bfd_open.

2015-04-02  Gary Benson <gbenson@redhat.com>

	* gdb/gdb_bfd.h (TARGET_SYSROOT_PREFIX): New definition.
	(is_target_filename): New declaration.
	(gdb_bfd_has_target_filename): Likewise.
	(gdb_bfd_open): Update documentation comment.
	* gdb_bfd.c (target.h): New include.
	(gdb/fileio.h): Likewise.
	(is_target_filename): New function.
	(gdb_bfd_has_target_filename): Likewise.
	(fileio_errno_to_host): Likewise.
	(gdb_bfd_iovec_fileio_open): Likewise.
	(gdb_bfd_iovec_fileio_pread): Likewise.
	(gdb_bfd_iovec_fileio_close): Likewise.
	(gdb_bfd_iovec_fileio_fstat): Likewise.
	(gdb_bfd_open): Use target fileio to access paths prefixed
	with "target:" where necessary.

2015-04-02  Gary Benson <gbenson@redhat.com>

	* target.h (struct target_ops) <to_filesystem_is_local>:
	New field.
	(target_filesystem_is_local): New macro.
	* target-delegates.c: Regenerate.
	* remote.c (remote_filesystem_is_local): New function.
	(init_remote_ops): Initialize to_filesystem_is_local.

2015-04-02  Gary Benson <gbenson@redhat.com>

	* target.h (struct target_ops) <to_fileio_fstat>: New field.
	(target_fileio_fstat): New declaration.
	* target.c (target_fileio_fstat): New function.
	* inf-child.c (inf_child_fileio_fstat): Likewise.
	(inf_child_target): Initialize to_fileio_fstat.
	* remote.c (init_remote_ops): Likewise.

2015-04-01  Sasha Smundak  <asmundak@google.com>

	* Makefile.in (SUBDIR_PYTHON_OBJS): Add py-unwind.o.
	(SUBDIR_PYTHON_SRCS): Add py-unwind.c.
	(py-unwind.o): New recipe.
	* NEWS: mention Python frame unwinding.
	* data-directory/Makefile.in (PYTHON_FILE_LIST): Add
	gdb/unwinder.py and gdb/command/unwinder.py
	* python/lib/gdb/__init__.py (packages): Add frame_unwinders
	list.
	(execute_unwinders): New function.
	* python/lib/gdb/command/unwinders.py: New file.
	* python/lib/gdb/unwinder.py: New file.
	* python/py-objfile.c (objfile_object): Add frame_unwinders field.
	(objfpy_dealloc): Decrement frame_unwinders reference count.
	(objfpy_initialize): Create frame_unwinders list.
	(objfpy_get_frame_unwinders): New function.
	(objfpy_set_frame_unwinders): Ditto.
	(objfile_getset): Add frame_unwinders attribute to Objfile.
	* python/py-progspace.c (pspace_object): Add frame_unwinders field.
	(pspy_dealloc): Decrement frame_unwinders reference count.
	(pspy_initialize): Create frame_unwinders list.
	(pspy_get_frame_unwinders): New function.
	(pspy_set_frame_unwinders): Ditto.
	(pspy_getset): Add frame_unwinders attribute to gdb.Progspace.
	* python/py-unwind.c: New file.
	* python/python-internal.h (pspy_get_name_unwinders): New prototype.
	(objpy_get_frame_unwinders): New prototype.
	(gdbpy_initialize_unwind): New prototype.
	* python/python.c (gdbpy_apply_type_printers): Call
	gdbpy_initialize_unwind.

2015-04-01  Pedro Alves  <palves@redhat.com>

	* infrun.c (resume): Check currently_stepping after clearing
	stepped_breakpoint, not before.

2015-04-01  Pedro Alves  <palves@redhat.com>

	* infrun.c (print_target_wait_results): Print all the ptid
	elements.

2015-04-01  Pedro Alves  <palves@redhat.com>

	* infrun.c (keep_going): Also discard cleanups if inserting
	breakpoints fails.

2015-04-01  Pedro Alves  <palves@redhat.com>

	* infrun.c (wait_for_inferior): Install the
	finish_thread_state_cleanup cleanup across the whole function, not
	just around handle_inferior_event.

2015-04-01  Pedro Alves  <palves@redhat.com>

	* infrun.c (resume) <step past permanent breakpoint>: Use
	do_target_resume.

2015-04-01  Pedro Alves  <palves@redhat.com>

	* linux-nat.c (linux_handle_extended_wait): Always call set_running.

2015-04-01  Pierre-Marie de Rodat  <derodat@adacore.com>

	* MAINTAINERS (Write After Approval): Add "Pierre-Marie de Rodat".

2015-04-01  Pedro Alves  <palves@redhat.com>

	* linux-thread-db.c (record_thread): Readd the thread to gdb's
	list if it was marked exited.

2015-04-01  H.J. Lu  <hongjiu.lu@intel.com>

	* configure: Regenerated.

2015-03-31  Sergio Durigan Junior  <sergiodj@redhat.com>
	    Jan Kratochvil  <jan.kratochvil@redhat.com>
	    Oleg Nesterov  <oleg@redhat.com>

	PR corefiles/16092
	* linux-tdep.c: Include 'gdbcmd.h' and 'gdb_regex.h'.
	New enum identifying the various options of the coredump_filter
	file.
	(struct smaps_vmflags): New struct.
	(use_coredump_filter): New variable.
	(decode_vmflags): New function.
	(mapping_is_anonymous_p): Likewise.
	(dump_mapping_p): Likewise.
	(linux_find_memory_regions_full): New variables
	'coredumpfilter_name', 'coredumpfilterdata', 'pid', 'filterflags'.
	Removed variable 'modified'.  Read /proc/<PID>/smaps file; improve
	parsing of its information.  Implement memory mapping filtering
	based on its contents.
	(show_use_coredump_filter): New function.
	(_initialize_linux_tdep): New command 'set use-coredump-filter'.
	* NEWS: Mention the possibility of using the
	'/proc/PID/coredump_filter' file when generating a corefile.
	Mention new command 'set use-coredump-filter'.

2015-03-31  Sergio Durigan Junior  <sergiodj@redhat.com>

	* solib-svr4.c (solib_svr4_r_ldsomap): Catch possible exception by
	read_memory_unsigned_integer.

2015-03-31  H.J. Lu  <hongjiu.lu@intel.com>

	* Makefile.in (ZLIB): New.
	(ZLIBINC): Likewise.
	(INTERNAL_CFLAGS_BASE): Add $(ZLIBINC).
	(CLIBS): Add $(ZLIB).
	* acinclude.m4: (GDB_AC_CHECK_BFD): Add $zlibdir to LDFLAGS.
	Add -lz to LIBS.
	* gdb_bfd.c: Don't check HAVE_ZLIB_H to include <zlib.h>.
	* top.c (print_gdb_configuration): Remove --with-zlib and
	--without-zlib.
	* config.in: Regenerated.
	* configure: Likewise.

2015-03-31  Antoine Tremblay  <antoine.tremblay@ericsson.com>

	* NEWS: Mention info os cpus support.
	* gdb/nat/linux-osdata.c (linux_xfer_osdata_cpus): New function.
	(struct osdata_type): Add cpus entry, reorder the entries in
	alphabetical order.

2015-03-31  Matthias Klose  <doko@ubuntu.com>

	* compile/compile.c (compile_to_object): Allow triplets with or
	without vendor set.

2015-03-30  Doug Evans  <dje@google.com>

	PR c++/18141
	* cp-namespace.c (cp_search_static_and_baseclasses): Always look for
	klass in VAR_DOMAIN.

2015-03-30  Gary Benson <gbenson@redhat.com>

	* remote.c (remote_mourn_1): Remove function.  Update all callers
	to use remote_mourn.
	(extended_remote_mourn_1): Remove function.  Update all callers
	to use extended_remote_mourn.
	(extended_remote_attach_1): Remove function.  Update all callers
	to use extended_remote_attach.

2015-03-28  James Bowman  <james.bowman@ftdichip.com>

	* Makefile.in (ALL_TARGET_OBS): Add ft32-tdep.o.
	(HFILES_NO_SRCDIR): Add ft32-tdep.h.
	(ALLDEPFILES): Add ft32-tdep.c.
	* configure.tgt: Add FT32 entry.
	* ft32-tdep.c: New file, FT32 target-dependent code.
	* ft32-tdep.h: New file, FT32 target-dependent code.

2015-03-27  Jan Kratochvil  <jan.kratochvil@redhat.com>

	Revert:
	2015-03-26  Jan Kratochvil  <jan.kratochvil@redhat.com>
	Code cleanup.
	* printcmd.c (print_command_1): Move expr variable scope.

2015-03-27  Joel Brobecker  <brobecker@adacore.com>

	* dtrace-probe.c (dtrace_process_dof_probe): Initialize expr to NULL.

2015-03-27  Andrzej Kaczmarek  <andrzej.kaczmarek@tieto.com>

	* gdb_bfd.c (gdb_bfd_section_index): Fix off-by-one for special
	sections.

2015-03-26  Joel Brobecker  <brobecker@adacore.com>

	* dtrace-probe.c (dtrace_process_dof_probe): Contain any
	exception raised while parsing the probe arguments.
	Force parsing to be done using the C language parser.
	* expression.h (parse_expression_with_language): Declare.
	* parse.c (parse_expression_with_language): New function.

2015-03-26  Jon Turney  <jon.turney@dronecode.org.uk>

	* MAINTAINERS (Write After Approval): Add "Jon Turney".

2015-03-26  Andy Wingo  <wingo@igalia.com>

	PR symtab/18148
	* dwarf2read.c (struct partial_die_info): Add has_const_value
	member.
	(add_partial_symbol): Don't punt on symbols that have const_value
	attributes.
	(read_partial_die): Detect DW_AT_const_value.

2015-03-26  Jan Kratochvil  <jan.kratochvil@redhat.com>

	Code cleanup.
	* printcmd.c (print_command_1): Move expr variable scope.

2015-03-26  Jan Kratochvil  <jan.kratochvil@redhat.com>

	Code cleanup.
	* printcmd.c (validate_format): Make the parameter cmdname const.

2015-03-26  Don Breazeal  <donb@codesourcery.com>

	* remote.c (_initialize_remote): Update comment.

2015-03-26  Pedro Alves  <palves@redhat.com>
	    Jon TURNEY  <jon.turney@dronecode.org.uk>

	* coffread.c (coff_symfile_read): When constructing the name of an
	import stub symbol from import symbol for amd64, only skip the
	char after _imp_ if the target is underscored (like i386) and the
	char is indeed the target's leading char.

2015-03-25  Pedro Alves  <palves@redhat.com>

	* target.h <to_async>: Replace 'callback' and 'context' parameters
	with boolean 'enable' parameter.
	(target_async): Replace CALLBACK and CONTEXT parameters with
	boolean ENABLE parameter.
	* inf-loop.c (inferior_event_handler): Adjust.
	* linux-nat.c (linux_nat_attach, linux_nat_resume)
	(linux_nat_resume): Adjust.
	(async_client_callback, async_client_context): Delete.
	(handle_target_event): Call inferior_event_handler directly.
	(linux_nat_async): Replace 'callback' and 'context' parameters
	with boolean 'enable' parameter.  Adjust.  Remove references to
	async_client_callback and async_client_context.
	(linux_nat_close): Adjust.
	* record-btrace.c (record_btrace_async): Replace 'callback' and
	'context' parameters with boolean 'enable' parameter.  Adjust.
	(record_btrace_resume): Adjust.
	* record-full.c (record_full_async): Replace 'callback' and
	'context' parameters with boolean 'enable' parameter.  Adjust.
	(record_full_resume, record_full_core_resume): Adjust.
	* remote.c (struct remote_state) <async_client_callback,
	async_client_context>: Delete fields.
	(remote_start_remote, extended_remote_attach_1, remote_resume)
	(extended_remote_create_inferior): Adjust.
	(remote_async_serial_handler): Call inferior_event_handler
	directly.
	(remote_async): Replace 'callback' and 'context' parameters with
	boolean 'enable' parameter.  Adjust.
	* top.c (gdb_readline_wrapper_cleanup, gdb_readline_wrapper):
	Adjust.
	* target-delegates.c: Regenerate.

2015-03-25  Gary Benson <gbenson@redhat.com>
	    Pedro Alves  <palves@redhat.com>

	* target.c (fileio_ft_t): New typedef, define object vector.
	(fileio_fhandles): New static variable.
	(is_closed_fileio_fh): New macro.
	(lowest_closed_fd): New static variable.
	(acquire_fileio_fd): New function.
	(release_fileio_fd): Likewise.
	(fileio_fd_to_fh): New macro.
	(target_fileio_open): Wrap the file descriptor on success.
	(target_fileio_pwrite): Updated to use wrapped file descriptor.
	(target_fileio_pread): Likewise.
	(target_fileio_close): Likewise.

2015-03-24  Pedro Alves  <palves@redhat.com>

	* thread.c (thread_apply_all_command): Take exited threads into
	account.

2015-03-24  Pedro Alves  <palves@redhat.com>

	* infrun.c (resume, proceed): Mention
	switch_back_to_stepped_thread, not switch_back_to_stepping.

2015-03-24  Pedro Alves  <palves@redhat.com>

	* infrun.c (user_visible_resume_ptid): Rewrite going from
	most-locked to unlocked instead of the opposite.  Move comment ...
	* infrun.h (user_visible_resume_ptid): ... here.

2015-03-24  Pedro Alves  <palves@redhat.com>

	* linux-nat.c (linux_nat_resume): Output debug logs before trying
	to resume the event lwp.  Use the lwp's ptid instead of the passed
	in (maybe wildcard) ptid.
	(stop_wait_callback): Tweak debug log output.
	(check_stopped_by_breakpoint): Tweak debug log output.  Also dump
	TRAP_TRACE.
	(linux_nat_filter_event): In debug output, distinguish a
	resume_stop SIGSTOP from a delayed SIGSTOP.  Output debug logs
	before trying to resume the lwp.

2015-03-24  Joel Brobecker  <brobecker@adacore.com>

	* gdbtypes.h (struct dynamic_prop_list) <prop>: Remove
	pointer indirection.
	* gdbtypes.c (get_dyn_prop): Adjust, following change above.
	(add_dyn_prop, copy_dynamic_prop_list): Likewise.

2015-03-24  Joel Brobecker  <brobecker@adacore.com>

	* gdbtypes.h (enum dynamic_prop_node_kind) <DYN_PROP_DATA_LOCATION>:
	Renames DYN_ATTR_DATA_LOCATION.
	(TYPE_DATA_LOCATION): Use DYN_PROP_DATA_LOCATION instead of
	DYN_ATTR_DATA_LOCATION.
	* dwarf2read.c (set_die_type): Use DYN_PROP_DATA_LOCATION
	instead of DYN_ATTR_DATA_LOCATION.

2015-03-24  Pedro Alves  <palves@redhat.com>

	* breakpoint.c (until_break_command): Adjust call to proceed.
	* gdbthread.h (struct thread_control_state) <stepping_command>:
	New field.
	* infcall.c (run_inferior_call): Adjust call to proceed.
	* infcmd.c (run_command_1, proceed_thread_callback, continue_1):
	Adjust calls to proceed.
	(set_step_frame): Set the current thread's step_start_function
	here.
	(step_once): Adjust calls to proceed.
	(jump_command, signal_command, until_next_command)
	(finish_backward, finish_forward, proceed_after_attach_callback)
	(attach_command_post_wait): Adjust calls to proceed.
	* infrun.c (proceed_after_vfork_done): Adjust call to proceed.
	(do_target_resume): New function, factored out from ...
	(resume): ... here.  Remove 'step' parameter.  Instead, check
	currently_stepping to determine whether the thread should be
	single-stepped.
	(proceed): Remove 'step' parameter and don't set the thread's
	step_start_function here.  Adjust call to 'resume'.
	(handle_inferior_event): Adjust calls to 'resume'.
	(switch_back_to_stepped_thread): Use do_target_resume instead of
	'resume'.
	(keep_going): Adjust calls to 'resume'.
	* infrun.h (proceed): Remove 'step' parameter.
	(resume): Likewise.
	* windows-nat.c (do_initial_windows_stuff): Adjust call to
	'resume'.
	* mi/mi-main.c (proceed_thread): Adjust call to 'proceed'.

2015-03-24  Pedro Alves  <palves@redhat.com>

	* gdbthread.h (struct thread_control_state) <stepping_command>:
	New field.
	* infcmd.c (step_once): Pass step=1 to clear_proceed_status.  Set
	the thread's stepping_command field.
	* infrun.c (resume): Check the thread's stepping_command flag to
	determine which threads should be resumed.  Rename 'entry_step'
	local to user_step.
	(clear_proceed_status_thread): Clear 'stepping_command'.
	(schedlock_applies): Change parameter type to struct thread_info
	pointer.  Adjust.
	(find_thread_needs_step_over): Remove 'step' parameter.  Adjust.
	(switch_back_to_stepped_thread): Adjust calls to
	'schedlock_applies'.
	(_initialize_infrun): Adjust "set scheduler-locking step" help.

2015-03-24  Pedro Alves  <palves@redhat.com>

	* infrun.c (step_start_function): Delete and ...
	* gdbthread.h (struct thread_control_state) <step_start_function>:
	... now a field here.
	* infrun.c (clear_proceed_status_thread): Clear the thread's
	step_start_function.
	(proceed, process_event_stop_test, print_stop_event): Adjust.

2015-03-24  Pedro Alves  <palves@redhat.com>

	* infrun.c (proceed): No longer handle negative step.

2015-03-24  Gary Benson  <gbenson@redhat.com>

	* nat/x86-linux.h (x86_linux_new_thread): New declaration.
	(x86_linux_prepare_to_resume): Likewise.
	* x86-linux-nat.c (x86_linux_new_thread):
	Moved to nat/x86-linux.c.
	(x86_linux_prepare_to_resume): Likewise.
	* nat/x86-linux.c (x86_linux_new_thread): New function.
	(x86_linux_prepare_to_resume): Likewise.

2015-03-24  Gary Benson  <gbenson@redhat.com>

	* nat/x86-linux-dregs.h: New file.
	* nat/x86-linux-dregs.c: Likewise.
	* Makefile.in (HFILES_NO_SRCDIR): Add nat/x86-linux-dregs.h.
	(x86-linux-dregs.o): New rule.
	* config/i386/linux.mh (NATDEPFILES): Add x86-linux-dregs.o.
	* config/i386/linux64.mh (NATDEPFILES): Likewise.
	* x86-linux-nat.c: Include nat/x86-linux-dregs.h.
	(u_debugreg_offset): Moved to nat/x86-linux-dregs.c.
	(x86_linux_dr_get): Likewise.
	(x86_linux_dr_set): Likewise.
	(x86_linux_dr_get_addr): Likewise.
	(x86_linux_dr_get_control): Likewise.
	(x86_linux_dr_get_status): Likewise.
	(update_debug_registers_callback): Likewise.
	(x86_linux_dr_set_control): Likewise.
	(x86_linux_dr_set_addr): Likewise.
	(x86_linux_update_debug_registers): Likewise.

2015-03-24  Gary Benson  <gbenson@redhat.com>

	* x86-linux-nat.c (x86_linux_update_debug_registers):
	New function, factored out from...
	(x86_linux_prepare_to_resume): ...this.

2015-03-24  Gary Benson  <gbenson@redhat.com>

	* x86-linux-nat.c (x86_linux_dr_get): Update comments.
	(x86_linux_dr_set): Likewise.
	(x86_linux_dr_get_addr): Likewise.
	(x86_linux_dr_get_control): Likewise.
	(x86_linux_dr_get_status): Likewise.
	(update_debug_registers_callback): Likewise.
	(x86_linux_dr_set_control): Likewise.
	(x86_linux_dr_set_addr): Likewise.
	(x86_linux_prepare_to_resume): Likewise.
	(x86_linux_new_thread): Likewise.

2015-03-24  Gary Benson  <gbenson@redhat.com>

	* x86-linux-nat.c (x86_linux_dr_set_addr): Update assertion.
	(x86_linux_new_thread): Rename argument.

2015-03-24  Gary Benson  <gbenson@redhat.com>

	* nat/x86-linux.h: New file.
	* nat/x86-linux.c: Likewise.
	* Makefile.in (HFILES_NO_SRCDIR): Add nat/x86-linux.h.
	(x86-linux.o): New rule.
	* config/i386/linux.mh (NATDEPFILES): Add x86-linux.o.
	* config/i386/linux64.mh (NATDEPFILES): Likewise.
	* nat/linux-nat.h (struct arch_lwp_info): New forward declaration.
	(lwp_set_arch_private_info): New declaration.
	(lwp_arch_private_info): Likewise.
	* linux-nat.c (lwp_set_arch_private_info): New function.
	(lwp_arch_private_info): Likewise.
	* x86-linux-nat.c: Include nat/x86-linux.h.
	(arch_lwp_info): Removed structure.
	(update_debug_registers_callback):
	Use lwp_set_debug_registers_changed.
	(x86_linux_prepare_to_resume): Use lwp_debug_registers_changed
	and lwp_set_debug_registers_changed.
	(x86_linux_new_thread): Use lwp_set_debug_registers_changed.

2015-03-24  Gary Benson  <gbenson@redhat.com>

	* nat/linux-nat.h (ptid_of_lwp): New declaration.
	(lwp_is_stopped): Likewise.
	(lwp_stop_reason): Likewise.
	* linux-nat.c (ptid_of_lwp): New function.
	(lwp_is_stopped): Likewise.
	(lwp_is_stopped_by_watchpoint): Likewise.
	* x86-linux-nat.c (update_debug_registers_callback):
	Use lwp_is_stopped.
	(x86_linux_prepare_to_resume): Use ptid_of_lwp and
	lwp_stop_reason.

2015-03-24  Gary Benson  <gbenson@redhat.com>

	* linux-nat.h (linux_stop_lwp): Move declaration to...
	* nat/linux-nat.h (linux_stop_lwp): New declaration.

2015-03-24  Gary Benson  <gbenson@redhat.com>

	* linux-nat.h: Include nat/linux-nat.h.
	(iterate_over_lwps): Move declaration to nat/linux-nat.h.
	* nat/linux-nat.h (struct lwp_info): New forward declaration.
	(iterate_over_lwps_ftype): New typedef.
	(iterate_over_lwps): New declaration.
	* linux-nat.h (iterate_over_lwps): Update comment.  Use
	iterate_over_lwps_ftype.  Update callback return value check.

2015-03-24  Gary Benson  <gbenson@redhat.com>

	* x86-nat.h (x86_debug_reg_state): Move declaration to...
	* nat/x86-dregs.h (x86_debug_reg_state): New declaration.

2015-03-24  Gary Benson  <gbenson@redhat.com>

	* nat/linux-nat.h (current_lwp_ptid): New declaration.
	* linux-nat.c (current_lwp_ptid): New function.
	* x86-linux-nat.c: Include nat/linux-nat.h.
	(x86_linux_dr_get_addr): Use current_lwp_ptid.
	(x86_linux_dr_get_control): Likewise.
	(x86_linux_dr_get_status): Likewise.
	(x86_linux_dr_set_control): Likewise.
	(x86_linux_dr_set_addr): Likewise.

2015-03-24  Antoine Tremblay  <antoine.tremblay@ericsson.com>

	PR breakpoints/16466
	* breakpoint.c (create_breakpoint): Set thread on breakpoint struct.

2015-03-23  Joel Brobecker  <brobecker@adacore.com>

	* ser-mingw.c (ser_windows_setparity): Fix indentation.
	* ser-unix.c (hardwire_setparity): Likewise.

2015-03-23  Yurij Grechishhev  <yurij.grechishhev@gmail.com>

	* NEWS: Mention set/show serial parity command.
	* monitor.c (monitor_open): Call serial_setparity.
	* remote.c (remote_open_1): Likewise.
	* ser-base.c (ser_base_serparity): New function.
	* ser-base.h (ser_base_setparity): Add  declaration.
	* ser-go32.c (dos_ops): Set "setparity" field.
	* ser-mingw.c (ser_windows_raw): Do not set state.fParity and
	state.Parity.
	(ser_windows_setparity): New function.
	(hardwire_ops): Add ser_windows_setparity.
	(tty_ops): Add NULL for setparity field.
	(pipe_ops): Add ser_base_setparity.
	(tcp_ops): Likewise.
	* ser-pipe.c (pipe_ops): Likewise.
	* ser-tcp.c (tcp_ops): Likewise.
	* ser-unix.c (hardwire_setparity): Add declaration.
	(hardwire_raw): Don't reset PARENB flag.
	(hardwire_setparity): New function.
	(hardwire_ops): Add hardwire_setparity.
	* serial.c (serial_setparity): New function.
	(serial_parity): New global.
	(parity_none, parity_odd, parity_even, parity_enums, parity):
	New static globals.
	(set_parity): New function.
	(_initialize_serial): Add set/show serial parity commands.
	* serial.h (GDBPARITY_NONE): Define.
	(GDBPARITY_ODD): Define.
	(GDBPARITY_EVEN): Define.
	(serial_setparity) Add declaration.
	(struct serial_ops): Add setparity field.
	* target.h (serial_parity): Add declaration.

2015-03-23  Keith Seitz  <keiths@redhat.com>

	* linespec.c (linespec_lexer_lex_keyword): Update comment.

2015-03-23  Keith Seitz  <keiths@redhat.com>

	* breakpoint.c (parse_breakpoint_sals): Use
	linespec_lexer_lex_keyword to ascertain if the user specified
	a NULL location.
	* linespec.c [IF_KEYWORD_INDEX]: Define.
	(linespec_lexer_lex_keyword): Export.
	(struct ls_parser) <keyword_ok>: Remove.
	A keyword is only a keyword if not followed by another keyword.
	(linespec_lexer_lex_one): Remove keyword_ok handling.
	Add comment explaining why the parsing stream is not advanced
	when a keyword is seen.
	(parse_linespec): Remove parser->keyword_ok.
	* linespec.h (linespec_lexer_lex_keyword): Add declaration.

2015-03-23  Keith Seitz  <keiths@redhat.com>

	PR gdb/18021
	* dwarf2read.c (dwarf2_add_member_fn): Issue a complaint
	if we find a static method with DW_AT_vtable_elem_location.

2015-03-21  Eli Zaretskii  <eliz@gnu.org>

	* tui/tui-io.c (tui_expand_tabs): Reinitialize the column counter
	before the second loop, to avoid undefined behavior.  Reported by
	Anton Blanchard <anton@samba.org>.

2015-03-20  Keven Boell  <keven.boell@intel.com>

	* gdbtypes.c (resolve_dynamic_type_internal): Adapt
	data_location usage to linked list.
	(resolve_dynamic_type_internal): Adapt data_location to
	linked list.
	(get_dyn_prop, add_dyn_prop, copy_dynamic_prop_list): New function.
	(copy_type_recursive, copy_type): Add copy of linked list.
	* gdbtypes.h (enum dynamic_prop_node_kind): New enum.
	(struct dynamic_prop_list): New struct.
	* dwarf2read.c (set_die_type): Set data_location data.

2015-03-20  Pedro Alves  <palves@redhat.com>

	* i386-sol2-tdep.c (i386_sol2_static_transform_name): Move "p" to
	inner block and make it const.
	* machoread.c (get_archive_prefix_len): Make "lparen" const.

2015-03-20  Pedro Alves  <palves@redhat.com>

	* breakpoint.c (set_breakpoint_condition): Make argument "exp" const.
	* breakpoint.h (set_breakpoint_condition): Update declaration.

2015-03-20  Pedro Alves  <palves@redhat.com>

	* tui/tui-io.c (tui_expand_tabs): Make "s1" const.

2015-03-20  Pedro Alves  <palves@redhat.com>

	* xcoffread.c (scan_xcoff_symtab): Make "p" and "q" const.

2015-03-20  Pedro Alves  <palves@redhat.com>

	* remote-m32r-sdi.c (m32r_open): Make "port_str" const.

2015-03-20  Pedro Alves  <palves@redhat.com>

	* nto-tdep.c (nto_find_and_open_solib): Make "endian" const.
	(nto_init_solib_absolute_prefix): Likewise.

2015-03-20  Pedro Alves  <palves@redhat.com>

	* sparc-sol2-tdep.c (sparc_sol2_static_transform_name): Make "p" const.
	* spu-tdep.c (spu_gdbarch_init): Make "name" const.

2015-03-20  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* config/djgpp/README: Remove gdb.hp.

2015-03-20  Yao Qi  <yao.qi@linaro.org>

	* aarch64-tdep.c (aarch64_gdbarch_init): Don't call
	set_gdbarch_cannot_step_breakpoint.

2015-03-19  Pedro Alves  <palves@redhat.com>

	* linux-nat.c (linux_resume_one_lwp): Rename to ...
	(linux_resume_one_lwp_throw): ... this.  Don't handle ESRCH here,
	instead call perror_with_name.
	(check_ptrace_stopped_lwp_gone): New function.
	(linux_resume_one_lwp): Reimplement as wrapper around
	linux_resume_one_lwp_throw that swallows errors if the LWP is
	gone.
	(resume_stopped_resumed_lwps): Try register reads in TRY/CATCH and
	swallows errors if the LWP is gone.  Use
	linux_resume_one_lwp_throw instead of linux_resume_one_lwp.

2015-03-19  Pedro Alves  <palves@redhat.com>

	* linux-nat.c (status_callback): Return early if the LWP has no
	status pending.

2015-03-19  Pedro Alves  <palves@redhat.com>

	* linux-nat.c (select_event_lwp_callback): Update comment to no
	longer mention SIGTRAP.

2015-03-18  Tristan Gingold  <gingold@adacore.com>

	* amd64-windows-tdep.c (amd64_windows_find_unwind_info): Move
	redirection code to ...
	(amd64_windows_frame_decode_insns): ... Here.  Fix in prologue
	checks.  Fix SAVE_NONVOL operations.  Add debug code and comments.

2015-03-18  Gary Benson <gbenson@redhat.com>

	(remote_protocol_features): Remove the "vFile:fstat" feature.
	(remote_hostio_fstat): Probe for "vFile:fstat" support.

2015-03-11  Yao Qi  <yao.qi@linaro.org>

	PR tdep/18107
	* aarch64-linux-tdep.c: Include xml-syscall.h
	(aarch64_linux_get_syscall_number): New function.
	(aarch64_linux_init_abi): Call
	set_gdbarch_get_syscall_number.
	* syscalls/aarch64-linux.xml: New file.

2015-03-17  Yurij Grechishhev  <yurij.grechishhev@gmail.com>

	* ser-base.h (ser_base_setstopbits): Change second argument name
	from "rate" to "num".

2015-03-17  Gary Benson <gbenson@redhat.com>
	    Luke Allardyce <lukeallardyce@gmail.com>

	PR gdb/18131
	* common/common-remote-fileio.h (sys/stat.h): New include.
	(stuct stat): Remove forward declaration.

2015-03-16  John Baldwin  <jhb@FreeBSD.org>

	* fbsd-tdep.c (fbsd_make_corefile_notes): Fetch all target registers
	before writing core register notes.

2015-03-16  Yuanhui Zhang  <asmwarrior@gmail.com>
	    Pedro Alves  <palves@redhat.com>

	* gdb_curses.h (tgetnum): Mark with EXTERN_C.
	* stub-termcap.c (tgetent, tgetnum, tgetflag, tgetstr, tputs)
	(tgoto): Wrap with extern "C".

2015-03-16  Pedro Alves  <palves@redhat.com>
	    Yuanhui Zhang  <asmwarrior@gmail.com>

	* stub-termcap.c (tputs): Change prototype.

2015-03-16  Yuanhui Zhang  <asmwarrior@gmail.com>
	    Pedro Alves  <palves@redhat.com>

	* windows-nat.c (struct thread_info_struct): Rename to ...
	(struct windows_thread_info_struct): ... this.
	(thread_info): Rename to ...
	(windows_thread_info): ... this.
	All users updated.

2015-03-14  Jan Kratochvil  <jan.kratochvil@redhat.com>
	    Pedro Alves  <palves@redhat.com>

	* NEWS: New Removed targets and native configurations.

2015-03-13  Jan Kratochvil  <jan.kratochvil@redhat.com>

	Remove HPUX.
	* Makefile.in (ALL_64_TARGET_OBS): Remove ia64-hpux-tdep.o.
	(ALL_TARGET_OBS): Remove hppa-hpux-tdep.o, solib-som.o and solib-pa64.o.
	(HFILES_NO_SRCDIR): Remove solib-som.h, inf-ttrace.h, solib-pa64.h and
	ia64-hpux-tdep.h, solib-ia64-hpux.h.
	(ALLDEPFILES): Remove hppa-hpux-tdep.c, hppa-hpux-nat.c,
	ia64-hpux-nat.c, ia64-hpux-tdep.c, somread.c and solib-som.c.
	* config/djgpp/fnchange.lst: Remove hppa-hpux-nat.c and
	hppa-hpux-tdep.c.
	* config/ia64/hpux.mh: Remove file.
	* config/pa/hpux.mh: Remove file.
	* configure: Rebuilt.
	* configure.ac (dlgetmodinfo, somread.o): Remove.
	* configure.host (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
	(ia64-*-hpux*): Remove its float format exception.
	* configure.tgt (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
	* hppa-hpux-nat.c: Remove file.
	* hppa-hpux-tdep.c: Remove file.
	* hppa-tdep.c (struct hppa_unwind_info, struct hppa_objfile_private):
	Move them here from hppa-tdep.h
	(hppa_objfile_priv_data, hppa_init_objfile_priv_data): Make it static.
	(hppa_frame_prev_register_helper): Remove HPPA_FLAGS_REGNUM exception.
	* hppa-tdep.h (struct hppa_unwind_info, struct hppa_objfile_private):
	Move them to hppa-tdep.c.
	(hppa_objfile_priv_data, hppa_init_objfile_priv_data): Remove
	declarations.
	* ia64-hpux-nat.c: Remove file.
	* ia64-hpux-tdep.c: Remove file.
	* ia64-hpux-tdep.h: Remove file.
	* inf-ttrace.c: Remove file.
	* inf-ttrace.h: Remove file.
	* solib-ia64-hpux.c: Remove file.
	* solib-ia64-hpux.h: Remove file.
	* solib-pa64.c: Remove file.
	* solib-pa64.h: Remove file.
	* solib-som.c: Remove file.
	* solib-som.h: Remove file.
	* somread.c: Remove file.

2015-03-13  John Baldwin  <jhb@FreeBSD.org>

	* configure.ac: AC_SEARCH_LIBS(kinfo_getvmmap, util).
	* config.in: Regenerate.
	* configure: Regenerate.
	* fbsd-nat.c [!HAVE_KINFO_GETVMMAP] (fbsd_read_mapping): Don't
	define.
	(fbsd_find_memory_regions): Use kinfo_getvmmap to
	enumerate memory regions if present.

2015-03-13  John Baldwin  <jhb@FreeBSD.org>

	* amd64fbsd-tdep.c (amd64fbsd_sigtramp_p): Style fixes.
	* i386fbsd-tdep.c: Fix style in various gdb_static_assert
	expressions.
	(i386fbsd_sigtramp_p): Likewise.

2015-03-12  John Baldwin  <jhb@FreeBSD.org>

	* MAINTAINERS (Write After Approval): Add John Baldwin.

2015-03-12  Gary Benson <gbenson@redhat.com>

	* solib.c (_initialize_solib): Make "set/show sysroot" use
	add_setshow_optional_filename_cmd so it can be restored to
	empty after being set.

2015-03-11  Sergio Durigan Junior  <sergiodj@redhat.com>

	* Makefile.in (SFILES): New source break-catch-syscall.c.
	(COMMON_OBS): New object break-catch-syscall.o.
	* break-catch-syscall.c: New file.
	* breakpoint.c: Remove inclusion of "xml-syscall.h".
	(syscall_catchpoint_p): Move declaration to break-catch-syscall.c
	(struct syscall_catchpoint): Likewise.
	(dtor_catch_syscall): Likewise.
	(catch_syscall_inferior_data): Likewise.
	(struct catch_syscall_inferior_data): Likewise.
	(get_catch_syscall_inferior_data): Likewise.
	(catch_syscall_inferior_data_cleanup): Likewise.
	(insert_catch_syscall): Likewise.
	(remove_catch_syscall): Likewise.
	(breakpoint_hit_catch_syscall): Likewise.
	(print_it_catch_syscall): Likewise.
	(print_one_catch_syscall): Likewise.
	(print_mention_catch_syscall): Likewise.
	(print_recreate_catch_syscall): Likewise.
	(catch_syscall_breakpoint_ops): Likewise.
	(syscall_catchpoint_p): Likewise.
	(create_syscall_event_catchpoint): Likewise.
	(catch_syscall_split_args): Likewise.
	(catch_syscall_command_1): Likewise.
	(is_syscall_catchpoint_enabled): Likewise.
	(catch_syscall_enabled): Likewise.
	(catching_syscall_number): Likewise.
	(catch_syscall_completer): Likewise.
	(clear_syscall_counts): Likewise.
	(initialize_breakpoint_ops): Move initialization of syscall
	catchpoints to break-catch-syscall.c.
	(_initialize_breakpoint): Move code related to syscall catchpoints
	to break-catch-syscall.c.

2015-03-11  Sergio Durigan Junior  <sergiodj@redhat.com>

	* breakpoint.c (breakpoint_find_if): New function.
	* breakpoint.h (breakpoint_find_if): New prototype.

2015-03-11  Gary Benson <gbenson@redhat.com>

	* remote-fileio.h (remote_fileio_to_host_stat): New declaration.
	* remote-fileio.c (remote_fileio_to_host_uint): New function.
	(remote_fileio_to_host_ulong): Likewise.
	(remote_fileio_to_host_mode): Likewise.
	(remote_fileio_to_host_time): Likewise.
	(remote_fileio_to_host_stat): Likewise.
	* remote.c (PACKET_vFile_fstat): New enum value.
	(remote_protocol_features): Register the "vFile:fstat" feature.
	(remote_hostio_fstat): New function.
	(remote_bfd_iovec_stat): Use the above.
	(_initialize_remote): Register new "set/show remote
	hostio-fstat-packet" command.
	* symfile.c (separate_debug_file_exists): Update comment.
	* NEWS: Announce new vFile:fstat packet.

2015-03-11  Gary Benson <gbenson@redhat.com>

	* common/common-remote-fileio.h: New file.
	* common/common-remote-fileio.c: Likewise.
	* Makefile.in (SFILES): Add common/common-remote-fileio.c.
	(HFILES_NO_SRCDIR): Add common/common-remote-fileio.h.
	(COMMON_OBS): Add common-remote-fileio.o.
	(common-remote-fileio.o): New rule.
	* remote-fileio.h (common-remote-fileio.h): New include.
	* remote-fileio.c (gdb/fileio.h): Do not include.
	(remote_fileio_to_be): Moved to common-remote-fileio.h.
	(remote_fileio_to_fio_uint): Likewise.
	(remote_fileio_to_fio_time): Likewise.
	(remote_fileio_mode_to_target): Moved to common-remote-fileio.c.
	(remote_fileio_to_fio_mode): Likewise.
	(remote_fileio_to_fio_ulong): Likewise.
	(remote_fileio_to_fio_stat): Likewise.

2015-03-11  Andy Wingo  <wingo@igalia.com>

	* guile/scm-value.c (gdbscm_value_dynamic_type): Fix typo in which
	we were checking the cached type, not the cached dynamic type.

2015-03-11  Andy Wingo  <wingo@igalia.com>

	* guile/scm-cmd.c (cmdscm_destroyer): Don't xfree the name and
	other strings, as these are on the GC'd heap, and will be
	collected along with the smob.

2015-03-11  Andy Wingo  <wingo@igalia.com>

	* guile/scm-objfile.c (gdbscm_objfile_progspace): New function.
	(objfile_functions): Bind gdbscm_objfile_progspace to
	objfile-progspace.
	* guile/lib/gdb.scm: Add objfile-progspace to exports.

2015-03-11  Andy Wingo  <wingo@igalia.com>

	* guile/guile.c (_initialize_guile): Disable automatic
	finalization, if Guile offers us that possibility.
	* guile/guile.c (call_initialize_gdb_module):
	* guile/scm-safe-call.c (gdbscm_with_catch): Arrange to run
	finalizers in appropriate places.
	* configure.ac (AC_TRY_LIBGUILE): Add a check for
	scm_set_automatic_finalization_enabled.
	* configure: Regenerated.

2015-03-11  Andreas Arnez  <arnez@linux.vnet.ibm.com>

	* s390-linux-tdep.c (s390_skip_prologue): Skip the prologue using
	SAL, if possible.

2015-03-11  Andreas Arnez  <arnez@linux.vnet.ibm.com>

	* s390-linux-nat.c (struct arch_lwp_info): New.
	(s390_fix_watch_points): Rename to...
	(s390_prepare_to_resume): ...this.  Skip the PER info update
	unless the watch points have changed.
	(s390_refresh_per_info, s390_new_thread): New functions.
	(s390_insert_watchpoint): Call s390_refresh_per_info instead of
	s390_fix_watch_points.
	(s390_remove_watchpoint): Likewise.
	(_initialize_s390_nat): Reflect renaming of s390_fix_watch_points.
	Register s390_prepare_to_resume.

2015-03-09  Pedro Alves  <palves@redhat.com>

	Revert:
	2015-03-07  Pedro Alves  <palves@redhat.com>
	* common/gdb_socket.h: New file.
	* ser-tcp.c: Include gdb_socket.h.  Don't include netinet/in.h nor
	sys/socket.h.
	(net_open): Use union gdb_sockaddr_u.

2015-03-07  Pedro Alves  <palves@redhat.com>

	* configure.ac (build_warnings): Move -Wmissing-prototypes
	-Wdeclaration-after-statement -Wmissing-parameter-type
	-Wold-style-declaration -Wold-style-definition to the C-specific
	set.
	* configure: Regenerate.

2015-03-07  Pedro Alves  <palves@redhat.com>

	* common/gdb_socket.h: New file.
	* ser-tcp.c: Include gdb_socket.h.  Don't include netinet/in.h nor
	sys/socket.h.
	(net_open): Use union gdb_sockaddr_u.

2015-03-07  Pedro Alves  <palves@redhat.com>

	* common/common-exceptions.c [!__cplusplus] (enum catcher_state)
	(exceptions_state_mc_action_iter)
	(exceptions_state_mc_action_iter_1, exceptions_state_mc_catch):
	Don't define.
	[__cplusplus] (try_scope_depth): New global.
	[__cplusplus] (exception_try_scope_entry)
	(exception_try_scope_exit, gdb_exception_sliced_copy)
	(exception_rethrow): New functions.
	(throw_exception): In C++ mode, throw
	gdb_exception_RETURN_MASK_QUIT for RETURN_QUIT and
	gdb_exception_RETURN_MASK_ERROR for RETURN_ERROR.
	(throw_it): In C++ mode, use try_scope_depth.
	* common/common-exceptions.h [!__cplusplus]
	(exceptions_state_mc_action_iter)
	(exceptions_state_mc_action_iter_1, exceptions_state_mc_catch):
	Don't declare.
	[__cplusplus] (exception_try_scope_entry)
	(exception_try_scope_exit, exception_rethrow): Declare.
	[__cplusplus] (struct exception_try_scope): New struct.
	[__cplusplus] (TRY, CATCH, END_CATCH): Reimplement on top of real
	C++ exceptions.
	(struct gdb_exception_RETURN_MASK_ALL)
	(struct gdb_exception_RETURN_MASK_ERROR)
	(struct gdb_exception_RETURN_MASK_QUIT): New types.

2015-03-07  Pedro Alves  <palves@redhat.com>

	* main.c (handle_command_errors): Remove volatile qualifier from
	parameter.

2015-03-07  Pedro Alves  <palves@redhat.com>

	* breakpoint.c (save_breakpoints): Adjust to avoid code between
	TRY and CATCH.
	* gdbtypes.c (safe_parse_type): Remove empty line.
	(types_deeply_equal):
	* guile/scm-frame.c (gdbscm_frame_name):
	* linux-thread-db.c (find_new_threads_once):
	* python/py-breakpoint.c (bppy_get_commands):
	* record-btrace.c (record_btrace_insert_breakpoint)
	(record_btrace_remove_breakpoint, record_btrace_start_replaying)
	(record_btrace_start_replaying): Adjust to avoid code between TRY
	and CATCH.

2015-03-07  Pedro Alves  <palves@redhat.com>

	* common/common-exceptions.c (struct catcher) <exception>: No
	longer a pointer to volatile exception.  Now an exception value.
	<mask>: Delete field.
	(exceptions_state_mc_init): Remove all parameters.  Adjust.
	(exceptions_state_mc): No longer pop the catcher here.
	(exceptions_state_mc_catch): New function.
	(throw_exception): Adjust.
	* common/common-exceptions.h (exceptions_state_mc_init): Remove
	all parameters.
	(exceptions_state_mc_catch): Declare.
	(TRY_CATCH): Rename to ...
	(TRY): ... this.  Remove EXCEPTION and MASK parameters.
	(CATCH, END_CATCH): New.
	All callers adjusted.

2015-03-07  Tom Tromey  <tromey@redhat.com>

	* top.c (quit_force): Inline and delete DO_TRY, DO_PRINT_EX.

2015-03-07  Pedro Alves  <palves@redhat.com>

	* amd64-tdep.c (amd64_frame_cache, amd64_sigtramp_frame_cache)
	(amd64_epilogue_frame_cache): Normal exception handling code.
	* break-catch-throw.c (check_status_exception_catchpoint)
	(re_set_exception_catchpoint): Ditto.
	* cli/cli-interp.c (safe_execute_command):
	* cli/cli-script.c (script_from_file): Ditto.
	* compile/compile-c-symbols.c (generate_c_for_for_one_variable):
	Ditto.
	* compile/compile-object-run.c (compile_object_run): Ditto.
	* cp-abi.c (baseclass_offset): Ditto.
	* cp-valprint.c (cp_print_value): Ditto.
	* exceptions.c (catch_exceptions_with_msg):
	* frame-unwind.c (frame_unwind_try_unwinder): Ditto.
	* frame.c (get_frame_address_in_block_if_available): Ditto.
	* i386-tdep.c (i386_frame_cache, i386_epilogue_frame_cache)
	(i386_sigtramp_frame_cache): Ditto.
	* infcmd.c (post_create_inferior): Ditto.
	* linespec.c (parse_linespec, find_linespec_symbols):
	* p-valprint.c (pascal_object_print_value): Ditto.
	* parse.c (parse_expression_for_completion): Ditto.
	* python/py-finishbreakpoint.c (bpfinishpy_init): Ditto.
	* remote.c (remote_get_noisy_reply): Ditto.
	* s390-linux-tdep.c (s390_frame_unwind_cache): Ditto.
	* solib-svr4.c (solib_svr4_r_map): Ditto.

2015-03-06  Gary Benson  <gbenson@redhat.com>

	* common/common-utils.h (startswith): New inline function.
	All places where this logic was used updated to use the above.

2015-03-05  Pedro Alves  <palves@redhat.com>

	PR gdb/18002
	* mem-break.c (default_memory_insert_breakpoint): Set shadow_len
	after reading the breakpoint's shadow memory.

2015-03-05  Mark Kettenis  <kettenis@gnu.org>

	* hppabsd-nat.c: Remove file.
	* hppaobsd-nat.c: New file.
	* Makefile.in (ALLDEPFILES): Remove hppabsd-nat.c.  Add
	hppaobsd-nat.c.
	* config/pa/obsd.mh (NATDEPFILES): Replace hppabsd-nat.o with
	hppaobsd-nat.o.

2015-03-04  Pedro Alves  <palves@redhat.com>

	* target.h (struct target_ops) <to_decr_pc_after_break>: Delete.
	(target_decr_pc_after_break): Delete declaration.
	* target.c (default_target_decr_pc_after_break)
	(target_decr_pc_after_break): Delete.
	* linux-nat.c (check_stopped_by_breakpoint, linux_nat_wait_1): Use
	gdbarch_decr_pc_after_break instead of target_decr_pc_after_break.
	* linux-thread-db.c (check_event): Likewise.
	* infrun.c (adjust_pc_after_break): Likewise.
	* darwin-nat.c (cancel_breakpoint): Likewise.
	* aix-thread.c (aix_thread_wait): Likewise.
	* target-delegates.c: Regenerate.

2015-03-04  Pedro Alves  <palves@redhat.com>

	* linux-nat.c (save_sigtrap): Check for breakpoints before
	checking watchpoints.
	(status_callback) [USE_SIGTRAP_SIGINFO]: Don't check whether a
	breakpoint is inserted if relying on SIGTRAP's siginfo.si_code.
	(check_stopped_by_breakpoint) [USE_SIGTRAP_SIGINFO]: Decide whether
	a breakpoint triggered based on the SIGTRAP's siginfo.si_code.
	(linux_nat_stopped_by_sw_breakpoint)
	(linux_nat_supports_stopped_by_sw_breakpoint)
	(linux_nat_stopped_by_hw_breakpoint)
	(linux_nat_supports_stopped_by_hw_breakpoint): New functions.
	(linux_nat_wait_1): Don't re-increment the PC if relying on
	SIGTRAP's siginfo->si_code.
	(linux_nat_add_target): Install new target methods.
	* linux-thread-db.c (check_event): Don't account for breakpoint PC
	offset if the target already adjusted the PC.
	* nat/linux-ptrace.h (USE_SIGTRAP_SIGINFO): New.
	(GDB_ARCH_TRAP_BRKPT): New.
	(TRAP_HWBKPT): Define if not already defined.

2015-03-04  Pedro Alves  <palves@redhat.com>

	* NEWS: Mention the new "swbreak" and "hwbreak" stop reasons.
	* remote.c (struct remote_state) <remote_stopped_by_watchpoint_p>:
	Delete field.
	<stop_reason>: New field.
	(PACKET_swbreak_feature, PACKET_hwbreak_feature): New enum values.
	(packet_set_cmd_state): New function.
	(remote_protocol_features): Register the "swbreak" and "hwbreak"
	features.
	(remote_query_supported): If not disabled with the corresponding
	"set remote foo-packet" command, report support for the swbreak
	and hwbreak features.
	(struct stop_reply) <remote_stopped_by_watchpoint_p>: Delete
	field.
	<stop_reason>: New field.
	(remote_parse_stop_reply): Handle "swbreak" and "hwbreak".
	(remote_wait_as): Adjust.
	(remote_stopped_by_sw_breakpoint)
	(remote_supports_stopped_by_sw_breakpoint)
	(remote_stopped_by_hw_breakpoint)
	(remote_supports_stopped_by_hw_breakpoint): New functions.
	(remote_stopped_by_watchpoint): New function.
	(init_remote_ops): Install them.
	(_initialize_remote): Register new "set/show remote
	swbreak-feature-packet" and "set/show remote
	swbreak-feature-packet" commands.

2015-03-04  Pedro Alves  <palves@redhat.com>

	* btrace.h: Include target/waitstatus.h.
	(struct btrace_thread_info) <stop_reason>: New field.
	* record-btrace.c (record_btrace_step_thread): Use
	record_check_stopped_by_breakpoint instead of breakpoint_here_p.
	(record_btrace_decr_pc_after_break): Delete.
	(record_btrace_stopped_by_sw_breakpoint)
	(record_btrace_supports_stopped_by_sw_breakpoint)
	(record_btrace_stopped_by_hw_breakpoint)
	(record_btrace_supports_stopped_by_hw_breakpoint): New functions.
	(init_record_btrace_ops): Install them.
	* record-full.c (record_full_hw_watchpoint): Delete and replace
	with ...
	(record_full_stop_reason): ... this throughout.
	(record_full_exec_insn): Adjust.
	(record_full_wait_1): Adjust.  No longer re-increment the PC.
	(record_full_wait_1): Adjust.  Use
	record_check_stopped_by_breakpoint instead of breakpoint_here_p.
	(record_full_stopped_by_watchpoint): Adjust.
	(record_full_stopped_by_sw_breakpoint)
	(record_full_supports_stopped_by_sw_breakpoint)
	(record_full_supports_stopped_by_sw_breakpoint)
	(record_full_stopped_by_hw_breakpoint)
	(record_full_supports_stopped_by_hw_breakpoint): New functions.
	(init_record_full_ops, init_record_full_core_ops): Install them.
	* record.c (record_check_stopped_by_breakpoint): New function.
	* record.h: Include target/waitstatus.h.
	(record_check_stopped_by_breakpoint): New declaration.

2015-03-04  Pedro Alves  <palves@redhat.com>

	enum lwp_stop_reason -> enum target_stop_reason
	* linux-nat.c (linux_resume_one_lwp, check_stopped_by_watchpoint)
	(linux_nat_stopped_by_watchpoint, status_callback)
	(linux_nat_wait_1): Adjust.
	* linux-nat.h (enum lwp_stop_reason): Delete.
	(struct lwp_info) <stop_reason>: Now an enum target_stop_reason.
	* x86-linux-nat.c (x86_linux_prepare_to_resume): Adjust.
	* target/waitstatus.h (enum target_stop_reason): New.

2015-03-04  Pedro Alves  <palves@redhat.com>

	* breakpoint.c (need_moribund_for_location_type): New function.
	(bpstat_stop_status): Don't skipping checking moribund locations
	of breakpoint types which the target tell caused a stop.
	(program_breakpoint_here_p): New function, factored out from ...
	(bp_loc_is_permanent): ... this.
	(update_global_location_list): Don't create a moribund location if
	the target supports reporting stops of the type of the removed
	breakpoint.
	* breakpoint.h (program_breakpoint_here_p): New declaration.
	* infrun.c (adjust_pc_after_break): Return early if the target has
	already adjusted the PC.  Add comments.
	(handle_signal_stop): If nothing explains a signal, and the target
	tells us the stop was caused by a software breakpoint, check if
	there's a breakpoint instruction in the memory.  If so, adjust the
	PC before presenting the stop to the user.  Otherwise, ignore the
	trap.  If nothing explains a signal, and the target tells us the
	stop was caused by a hardware breakpoint, ignore the trap.
	* target.h (struct target_ops) <to_stopped_by_sw_breakpoint,
	to_supports_stopped_by_sw_breakpoint, to_stopped_by_hw_breakpoint,
	to_supports_stopped_by_hw_breakpoint>: New fields.
	(target_stopped_by_sw_breakpoint)
	(target_supports_stopped_by_sw_breakpoint)
	(target_stopped_by_hw_breakpoint)
	(target_supports_stopped_by_hw_breakpoint): Define.
	* target-delegates.c: Regenerate.

2015-03-04  Pedro Alves  <palves@redhat.com>

	* infrun.c (follow_fork_inferior): Use the whole of the
	inferior_ptid and pending_follow.related_pid ptids instead of
	building ptids from the process components.  Adjust verbose output
	to use target_pid_to_str.
	* linux-nat.c (linux_child_follow_fork): Use the whole of the
	inferior_ptid and pending_follow.related_pid ptids instead of
	building ptids from the process components.

2015-03-04  Mark Kettenis  <kettenis@gnu.org>

	* inf-ptrace.c [PT_GET_PROCESS_STATE]
	(inf_ptrace_insert_fork_catchpoint): New function.
	(inf_ptrace_remove_fork_catchpoint): New function.
	(inf_ptrace_target) [PT_GET_PROCESS_STATE]: Install them.

2015-03-04  Andreas Arnez  <arnez@linux.vnet.ibm.com>

	* s390-linux-tdep.c (s390_register_name): Return empty string
	instead of NULL for registers that shouldn't be visible.

2015-03-04  Andreas Arnez  <arnez@linux.vnet.ibm.com>

	* s390-linux-tdep.c (s390_gdbarch_init): Use the correct syscall
	XML file for 64-bit targets.

2015-03-03  Simon Marchi  <simon.marchi@ericsson.com>

	* target.h (find_default_create_inferior): Remove declaration.
	(find_default_attach): Likewise.

2015-03-03  Pedro Alves  <palves@redhat.com>

	* inf-ptrace.c (inf_ptrace_resume): Remove spurious whitespace.
	Use ptid_get_pid to get the overall process id when resuming all
	threads.

2015-03-03  Pedro Alves  <palves@redhat.com>

	* i386-linux-nat.c (i386_linux_resume): Get the ptrace PID out of
	the lwp field of ptid.  Pass the full ptid to get_thread_regcache.
	* inf-ptrace.c (get_ptrace_pid): New function.
	(inf_ptrace_resume): Use it.
	* linux-nat.c (linux_resume_one_lwp): Pass the LWP's ptid ummodified
	to the lower layer.

2015-03-03  Markus Metzger  <markus.t.metzger@intel.com>

	* nat/linux-btrace.c: Include sys/utsname.h.
	(linux_determine_kernel_ptr_bits): New.
	(linux_enable_bts): Call linux_determine_kernel_ptr_bits.
	* x86-linux-nat.c (x86_linux_enable_btrace): Do not overwrite non-zero
	ptr_bits.

2015-03-03  Markus Metzger  <markus.t.metzger@intel.com>

	* btrace.c (ftrace_update_function): Treat return as tailcall for
	"_dl_runtime_resolve".

2015-03-03  Markus Metzger  <markus.t.metzger@intel.com>

	* btrace.h (btrace_function) <lbegin, lend>: Remove.
	* btrace.c (ftrace_debug): Do not print the line range.
	(ftrace_skip_file, ftrace_update_lines): Remove.
	(ftrace_new_function): Remove lbegin and lend initialization.
	(btrace_compute_ftrace_bts): Remove call to ftrace_update_lines.
	* record-btrace.c (btrace_compute_src_line_range): New.
	(btrace_call_history_src_line): Call btrace_compute_src_line_range.

2015-03-02  Pedro Alves  <palves@redhat.com>

	* infrun.c (follow_exec): Delete all threads of the process except
	the event thread.  Extended comments.

2015-03-02  Joel Brobecker  <brobecker@adacore.com>

	* contrib/ari/gdb_ari.sh: Reinstate checks for "true" and "false".

2015-03-02  Joel Brobecker  <brobecker@adacore.com>

	* utils.h: Remove <stdbool.h> #include.
	(producer_is_gcc): Change return type to "int".
	* utils.c (producer_is_gcc): Change return type to int.
	Return 1 instead of true, and 0 instead of false.
	Adjust function documentation accordingly.

2015-03-02  Andreas Arnez  <arnez@linux.vnet.ibm.com>

	* s390-linux-nat.c (have_regset_vxrs): New static variable.
	(s390_linux_fetch_inferior_registers): Handle vector registers, if
	present.
	(s390_linux_store_inferior_registers): Likewise.
	(s390_get_hwcap): Remove function.  Embed its logic...
	(s390_read_description): ...here.  Yield a target description with
	vector registers if applicable.
	* s390-linux-tdep.c: Include "features/s390-vx-linux64.c",
	"features/s390-tevx-linux64.c", "features/s390x-vx-linux64.c", and
	"features/s390x-tevx-linux64.c".
	(struct gdbarch_tdep) <v0_full_regnum>: New field.
	(s390_dwarf_regmap): Add vector registers.  Remove bogus entries
	for "GNU/Linux-specific registers".
	(s390_dwarf_reg_r0l): New enum value.
	(s390_dwarf_reg_to_regnum): Support vector registers.
	(s390_adjust_frame_regnum): Adjust pseudo DWARF register numbers
	of GPR lower halves.
	(regnum_is_vxr_full): New function.
	(s390_register_name): New function.
	(s390_pseudo_register_name): Handle v0-v15, which are composed of
	f0-f15 and v0l-v15l.
	(s390_pseudo_register_type): Likewise.
	(s390_pseudo_register_read): Likewise.
	(s390_pseudo_register_write): Likewise.
	(s390_value_from_register): Account for the fact that values are
	placed left-justified in vector registers.
	(s390_pseudo_register_reggroup_p): Add pseudo registers v0-v15 to
	the vector reggroup and omit them from the general reggroup.
	(s390_regmap_vxrs_low, s390_regmap_vxrs_high): New register maps.
	(s390_vxrs_low_regset, s390_vxrs_high_regset): New regsets.
	(s390_iterate_over_regset_sections): Add iterations for the two
	new vector regsets.
	(s390_core_read_description): Yield a target description with
	vector registers if applicable.
	(s390_gdbarch_init): Handle target descriptions with vector
	registers.  Add "register_name" gdbarch method.
	(_initialize_s390_tdep): Call new tdesc initialization functions.
	* s390-linux-tdep.h (HWCAP_S390_VX): New macro.
	(S390_V0_LOWER_REGNUM, S390_V1_LOWER_REGNUM, S390_V2_LOWER_REGNUM)
	(S390_V3_LOWER_REGNUM, S390_V4_LOWER_REGNUM, S390_V5_LOWER_REGNUM)
	(S390_V6_LOWER_REGNUM, S390_V7_LOWER_REGNUM, S390_V8_LOWER_REGNUM)
	(S390_V9_LOWER_REGNUM, S390_V10_LOWER_REGNUM)
	(S390_V11_LOWER_REGNUM, S390_V12_LOWER_REGNUM)
	(S390_V13_LOWER_REGNUM, S390_V14_LOWER_REGNUM)
	(S390_V15_LOWER_REGNUM, S390_V16_REGNUM, S390_V17_REGNUM)
	(S390_V18_REGNUM, S390_V19_REGNUM, S390_V20_REGNUM)
	(S390_V21_REGNUM, S390_V22_REGNUM, S390_V23_REGNUM)
	(S390_V24_REGNUM, S390_V25_REGNUM, S390_V26_REGNUM)
	(S390_V27_REGNUM, S390_V28_REGNUM, S390_V29_REGNUM)
	(S390_V30_REGNUM, S390_V31_REGNUM): New macros.
	(S390_NUM_REGS): Adjust value.
	(s390_vxrs_low_regset, s390_vxrs_high_regset): Declare.
	(tdesc_s390_vx_linux64, tdesc_s390_tevx_linux64)
	(tdesc_s390x_vx_linux64, tdesc_s390x_tevx_linux64): Likewise.
	* NEWS: Announce S/390 vector register support.

2015-03-02  Andreas Arnez  <arnez@linux.vnet.ibm.com>

	* features/s390-tevx-linux64.xml: New file.
	* features/s390-vx-linux64.xml: New file.
	* features/s390-vx.xml: New file.
	* features/s390x-tevx-linux64.xml: New file.
	* features/s390x-vx-linux64.xml: New file.
	* features/Makefile (WHICH): Add s390-vx-linux64,
	s390x-vx-linux64, s390-tevx-linux64, and s390x-tevx-linux64.
	(s390-vx-linux64-expedite, s390-tevx-linux64-expedite)
	(s390x-vx-linux64-expedite, s390x-tevx-linux64-expedite): New
	macros.
	* features/s390-tevx-linux64.c: New generated file.
	* features/s390-vx-linux64.c: Likewise.
	* features/s390x-tevx-linux64.c: Likewise.
	* features/s390x-vx-linux64.c: Likewise.
	* regformats/s390-tevx-linux64.dat: Likewise.
	* regformats/s390-vx-linux64.dat: Likewise.
	* regformats/s390x-tevx-linux64.dat: Likewise.
	* regformats/s390x-vx-linux64.dat: Likewise.

2015-02-28  Doug Evans  <xdje42@gmail.com>

	* symtab.h (struct symtab) <next>: Fix comment.

2015-02-27  Simon Marchi  <simon.marchi@ericsson.com>

	* python/python.c (python_GdbModuleDef): Rename GdbMethods to
	python_GdbMethods.

2015-02-27  Pedro Alves  <palves@redhat.com>

	* dtrace-probe.c (dtrace_probe_ops): Make extern.

2015-02-27  Pedro Alves  <palves@redhat.com>

	* common/common-exceptions.h (exception_none): Declare.
	* common/common-exceptions.c (exception_none): Moved from
	exceptions.c.
	(exceptions_state_mc_init): Use exception_none.
	* exceptions.c (exception_none): Move to
	common/common-exceptions.c.
	* exceptions.h (exception_none): Move to
	common/common-exceptions.h.

2015-02-27  Pedro Alves  <palves@redhat.com>

	* main.c (catch_command_errors, catch_command_errors_const):
	Remove 'mask' argument.  Adjust.
	(captured_main): Adjust callers.

2015-02-27  Pedro Alves  <palves@redhat.com>

	* python/python-internal.h: Include "extension-priv.h".

2015-02-27  Pedro Alves  <palves@redhat.com>

	* breakpoint.h (enum print_stop_action): Move further up in the
	file.

2015-02-27  Pedro Alves  <palves@redhat.com>

	* gdbarch.sh: Include regcache.h.
	* gdbarch.h: Regenerate.

2015-02-27  Pedro Alves  <palves@redhat.com>

	* arm-tdep.c (decode_insn) <arm_handle_insn, thumb_handle_insn>:
	Remove duplicate const.
	* sparc-sol2-tdep.c (sparc_sol2_static_transform_name): Remove
	duplicate const.

2015-02-27  Pedro Alves  <palves@redhat.com>

	* cp-valprint.c (vtbl_ptr_name): Use EXPORTED_CONST.
	* guile/guile.c (extension_language_guile): Use EXPORTED_CONST.
	* features/feature_to_c.sh: Tag the generated xml_builtin array
	with extern const in C++ mode.

2015-02-27  Tom Tromey  <tromey@redhat.com>

	* minidebug.c (struct lzma_stream): Rename to ...
	(struct gdb_lzma_stream): ... this.
	(lzma_open, lzma_pread, lzma_close, lzma_stat): Adjust.

2015-02-27  Pedro Alves  <palves@redhat.com>

	* mi/mi-cmd-stack.c (mi_apply_ext_lang_frame_filter): New
	function.
	(mi_cmd_stack_list_locals, mi_cmd_stack_list_args)
	(mi_cmd_stack_list_variables): Use it.

2015-02-27  Pedro Alves  <palves@redhat.com>

	* x86-linux-nat.c (u_debugreg_offset): New function.
	(x86_linux_dr_get, x86_linux_dr_set): Use it.

2015-02-27  Pedro Alves  <palves@redhat.com>

	* nat/x86-dregs.h (enum target_hw_bp_type): Remove forward
	declaration.
	Include break-common.h.

2015-02-27  Tom Tromey  <tromey@redhat.com>
	    Pedro Alves <palves@redhat.com>

	* arm-tdep.c (set_fp_model_sfunc, arm_set_abi): Use 'int' for
	local used to iterate over enums.
	* completer.c (signal_completer): Likewise.
	* i386-tdep.c (i386_stap_parse_special_token): Likewise.
	* rs6000-tdep.c (powerpc_set_vector_abi): Likewise.
	* tui/tui-data.c (tui_next_win, tui_prev_win): Likewise.
	* tui/tui-layout.c (next_layout, prev_layout): Likewise.
	* tui/tui-win.c (tui_refresh_all_win, tui_rehighlight_all)
	(tui_resize_all, tui_set_focus_command, tui_all_windows_info): Likewise.
	* tui-wingeneral.c (tui_refresh_all):  Likewise.

2015-02-27  Pedro Alves  <palves@redhat.com>

	* target.h: Include "infrun.h".

2015-02-27  Pedro Alves  <palves@redhat.com>

	* gdb_proc_service.h: Wrap with EXTERN_C_PUSH/EXTERN_C_POP.

2015-02-27  Pedro Alves  <palves@redhat.com>

	* common/agent.h (IPA_SYM_EXPORTED_NAME): New.
	(IPA_SYM): Use it.
	* common/common-defs.h (EXTERN_C_PUSH, EXTERN_C_POP): New macros.

2015-02-27  Pedro Alves  <palves@redhat.com>

	* cli-out.c (_rl_erase_entire_line): Move declaration out of
	cli_mld_erase_entire_line, and make it extern "C".
	* common/common-defs.h (EXTERN_C): New.
	* completer.c (_rl_completion_prefix_display_length)
	(_rl_print_completions_horizontally, QSFUNC): Move declarations
	out of gdb_display_match_list_1.
	(_rl_qsort_string_compare): Move declaration out of
	gdb_display_match_list_1, and make it extern "C".
	* defs.h (re_comp): Use EXTERN_C.
	* maint.c (_mcleanup): Move declaration out of mcleanup_wrapper,
	and make it extern "C".
	(monstartup): Move declaration out of maintenance_set_profile_cmd,
	and make it extern "C".
	(main): Move declaration out of maintenance_set_profile_cmd.
	* nat/linux-ptrace.c (linux_ptrace_attach_fail_reason_string): Use
	EXTERN_C.

2015-02-27  Pedro Alves  <palves@redhat.com>

	* python/python.c (GdbMethods): Rename to ...
	(python_GdbMethods): ... this and make extern.
	(GdbModuleDef): Rename to ...
	(python_GdbModuleDef): ... this and make extern.

2015-02-27  Pedro Alves  <palves@redhat.com>

	* record-btrace.c (set_record_btrace_cmdlist)
	(show_record_btrace_cmdlist): Remove redefinitions.

2015-02-27  Tom Tromey  <tromey@redhat.com>
	    Pedro Alves  <palves@redhat.com>

	* dwarf2-frame.c (enum cfa_how_kind, struct
	dwarf2_frame_state_reg_info): Move out of struct
	dwarf2_frame_state.
	* dwarf2read.c (struct tu_stats): Move out of struct
	dwarf2_per_objfile.
	(struct file_entry): Move out of struct line_header.
	(struct nextfield, struct nextfnfield, struct fnfieldlist, struct
	typedef_field_list): Move out of struct field_info.
	* gdbtypes.h (enum dynamic_prop_kind, union dynamic_prop_data):
	Move out of struct dynamic_prop.
	(union type_owner, union field_location, struct field, struct
	range_bounds, union type_specific): Move out of struct main_type.
	(struct fn_fieldlist, struct fn_field, struct typedef_field)
	(VOFFSET_STATIC): Move out of struct cplus_struct_type.
	(struct call_site_target, union call_site_parameter_u, struct
	call_site_parameter): Move out of struct call_site.
	* m32c-tdep.c (enum m32c_prologue_kind): Move out of struct
	m32c_prologue.
	(enum srcdest_kind): Move out of struct srcdest.
	* main.c (enum cmdarg_kind): Move out of struct cmdarg.
	* prologue-value.h (enum prologue_value_kind): Move out of struct
	prologue_value.
	* s390-linux-tdep.c (enum s390_abi_kind): Move out of struct
	gdbarch_tdep.
	* stabsread.c (struct nextfield, struct next_fnfieldlist): Move
	out of struct field_info.
	* symfile.h (struct other_sections): Move out of struct
	section_addr_info.
	* symtab.c (struct symbol_cache_slot): Move out struct
	block_symbol_cache.
	* target-descriptions.c (enum tdesc_type_kind): Move out of
	typedef struct tdesc_type.
	* tui/tui-data.h (enum tui_line_or_address_kind): Move out of
	struct tui_line_or_address.
	* value.c (enum internalvar_kind, union internalvar_data): Move
	out of struct internalvar.
	* xtensa-tdep.h (struct ctype_cache): Move out of struct
	gdbarch_tdep.

2015-02-27  Tom Tromey  <tromey@redhat.com>
	    Pedro Alves  <palves@redhat.com>

	Rename symbols whose names are reserved C++ keywords throughout.

2015-02-27  Pedro Alves  <palves@redhat.com>

	* Makefile.in (COMPILER): New, get it from autoconf.
	(COMPILE.pre, CC_LD): Use COMPILER.
	(CXX): Get from autoconf instead.
	(CXX_FOR_TARGET): Default to g++ instead of gcc.
	* acinclude.m4: Include build-with-cxx.m4.
	* build-with-cxx.m4: New file.
	* configure.ac: Call AC_PROG_CXX and GDB_AC_BUILD_WITH_CXX.
	Disable -Werror by default if building in C++ mode.
	(build_warnings): Add -Wno-sign-compare, -Wno-write-strings and
	-Wno-narrowing in C++ mode.  Only enable -Wpointer-sign in C mode.
	Run supported-warning-flags tests with the C++ compiler.
	Save/restore CXXFLAGS too.
	* configure: Regenerate.

2015-02-27  Pedro Alves  <palves@redhat.com>

	* libiberty.m4: New file.
	* acinclude.m4: Include libiberty.m4.
	* configure.ac: Call libiberty_INIT.
	* config.in, configure: Regenerate.

2015-02-27  Andreas Arnez  <arnez@linux.vnet.ibm.com>

	* s390-linux-tdep.c (s390_gcc_target_options): Not just handle
	31-bit targets, but 64-bit targets as well.
	(s390_gnu_triplet_regexp): New function.
	(s390_gdbarch_init): Set the gcc_target_options gdbarch method for
	64-bit targets as well.  Set the gnu_triplet_regexp gdbarch
	method.

2015-02-27  Jon TURNEY  <jon.turney@dronecode.org.uk>  (tiny patch)

	* windows-nat.c (CONTEXT_DEBUGGER): Remove.
	(CONTEXT_DEBUGGER_DR): Add CONTEXT_SEGMENTS.  Incorporate flags
	from CONTEXT_DEBUGGER.

2015-02-26  Doug Evans  <dje@google.com>

	* gdbtypes.c (internal_type_vptr_fieldno): Add missing call to
	CHECK_TYPEDEF.
	(set_type_vptr_fieldno): Ditto.
	(internal_type_vptr_basetype, set_type_vptr_basetype): Ditto.
	* gnu-v3-abi.c (gnuv3_dynamic_class): Ditto.

2015-02-26  Pedro Alves  <palves@redhat.com>

	* auto-load.h (file_is_auto_load_safe): Add ATTRIBUTE_PRINTF.
	* complaints.c (vcomplaint): Pass argument FMT directly to
	printf-like functions instead of complaint->fmt.
	* ctf.c (ctf_save_write_metadata): Add ATTRIBUTE_PRINTF.
	* darwin-nat.c (inferior_debug): Add ATTRIBUTE_PRINTF.
	* compile/compile-loc2c.c (pushf, unary, binary): Add
	ATTRIBUTE_PRINTF.
	(do_compile_dwarf_expr_to_c): Pass string literal as format string
	to pushf.
	(BINARY): Pass string literal as format string to 'binary'.
	* compile/compile-object-load.c (link_callbacks_einfo): Add
	ATTRIBUTE_PRINTF.
	* guile/guile-internal.h (gdbscm_printf): Add ATTRIBUTE_PRINTF.

2015-02-26  Pedro Alves  <palves@redhat.com>

	* windows-termcap.c: Rename to ...
	* stub-termcap.c: ... this.  Adjust header line.
	* Makefile.in (SFILES): Refer to stub-termcap.c instead of
	windows-termcap.c.
	* configure: Regenerate.
	* configure.ac: Refer to stub-termcap.o instead of
	windows-termcap.o.
	* gdb_curses.h: Mention stub-termcap.c instead of
	windows-termcap.c.

2015-02-26  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* compile/compile-c-symbols.c (convert_one_symbol, convert_symbol_bmsym)
	(gcc_symbol_address): Call gnu_ifunc_resolve_addr.

2015-02-26  Antoine Tremblay  <antoine.tremblay@ericsson.com>

	* gdb/infcmd.c (print_return_value): use type_to_string to print type.

2015-02-26  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* elfread.c (elf_read_minimal_symbols): Use bfd_alloc for
	bfd_canonicalize_symtab.

2015-02-25  John Baldwin  <jhb@FreeBSD.org>

	* amd64fbsd-nat.c: Include sys/user.h.
	(_initialize_amd64fbsd_nat): Use the KERN_PROC_SIGTRAMP sysctl
	instead of KERN_PS_STRINGS to locate the signal trampoline.
	* i386fbsd-nat.c: Include sys/user.h.
	(_initialize_i386fbsd_nat): Use the KERN_PROC_SIGTRAMP sysctl
	instead of KERN_PS_STRINGS to locate the signal trampoline.
	* amd64fbsd-tdep.c (amd64fbsd_sigtramp_code): New.
	(amd64fbsd_sigtramp_p): New.
	(amd64fbsd_sigtramp_start_addr, amd64fbsd_sigtramp_end_addr): No
	longer set default values.
	(amd64fbsd_init_abi): Set "sigtramp_p" to "amd64fbsd_sigtramp_p".
	* i386fbsd-tdep.c (i386fbsd_sigtramp_start)
	(i386fbsd_sigtramp_middle, i386fbsd_sigtramp_end)
	(i386fbsd_freebsd4_sigtramp_start)
	(i386fbsd_freebsd4_sigtramp_middle)
	(i386fbsd_freebsd4_sigtramp_end, i386fbsd_osigtramp_start)
	(i386fbsd_osigtramp_middle, i386fbsd_osigtramp_end): New.
	(i386fbsd_sigtramp_p): New.
	(i386fbsd_sigtramp_start_addr, i386fbsd_sigtramp_end_addr): No
	longer set default values.
	(i386fbsd_init_abi): Set "sigtramp_p" to "i386fbsd_sigtramp_p".

2015-02-25  John Baldwin  <jhb@freebsd.org>

	* amd64fbsd-tdep.c (amd64fbsd_sigcontext_addr): Use
	get_frame_register instead of frame_unwind_register_unsigned.

2015-02-26  Jan Kratochvil  <jan.kratochvil@redhat.com>

	PR build/18033
	* compile/compile-c-support.c (c_compute_program): Change // comment.
	* compile/compile-object-load.c (setup_sections): Change // comment.

2015-02-26  Joel Brobecker  <brobecker@adacore.com>

	PR build/18033:
	* iq2000-tdep.c (iq2000_frame_cache): Delete C++-style comment.

2015-02-23  Pedro Alves  <palves@redhat.com>

	* remote.c (skip_to_semicolon): New function.
	(remote_parse_stop_reply) <T stop reply>: Use it.  Don't
	special case the stop reasons that look like hex numbers
	upfront.  Instead handle real register numbers after matching
	all the known stop reasons.

2015-02-21  Doug Evans  <dje@google.com>

	PR c++/17976, symtab/17821
	* cp-namespace.c (cp_search_static_and_baseclasses): New parameter
	is_in_anonymous.  All callers updated.
	(find_symbol_in_baseclass): Ditto.
	(cp_lookup_nested_symbol_1): Ditto.  Don't search all static blocks
	for symbols in an anonymous namespace.
	* dwarf2read.c (namespace_name): Don't call dwarf2_name, fetch
	DW_AT_name directly.
	(dwarf2_name): Convert missing namespace name to
	CP_ANONYMOUS_NAMESPACE_STR.

2015-02-20  Pedro Alves  <palves@redhat.com>

	* linux-nat.c (linux_handle_extended_wait): Call
	thread_db_notice_clone whenever a new clone LWP is detected.
	(linux_stop_and_wait_all_lwps, linux_unstop_all_lwps): New
	functions.
	* linux-nat.h (thread_db_attach_lwp): Delete declaration.
	(thread_db_notice_clone, linux_stop_and_wait_all_lwps)
	(linux_unstop_all_lwps): Declare.
	* linux-thread-db.c (struct thread_get_info_inout): Delete.
	(thread_get_info_callback): Delete.
	(thread_from_lwp): Use td_thr_get_info and record_thread.
	(thread_db_attach_lwp): Delete.
	(thread_db_notice_clone): New function.
	(try_thread_db_load_1): If /proc is mounted and shows the
	process'es task list, walk over all LWPs and call thread_from_lwp
	instead of relying on td_ta_thr_iter.
	(attach_thread): Don't call check_thread_signals here.  Split the
	tail part of the function (which adds the thread to the core GDB
	thread list) to ...
	(record_thread): ... this function.  Call check_thread_signals
	here.
	(thread_db_wait): Don't call thread_db_find_new_threads_1.  Always
	call thread_from_lwp.
	(thread_db_update_thread_list): Rename to ...
	(thread_db_update_thread_list_org): ... this.
	(thread_db_update_thread_list): New function.
	(thread_db_find_thread_from_tid): Delete.
	(thread_db_get_ada_task_ptid): Simplify.
	* nat/linux-procfs.c: Include <sys/stat.h>.
	(linux_proc_task_list_dir_exists): New function.
	* nat/linux-procfs.h (linux_proc_task_list_dir_exists): Declare.

2015-02-20  Pedro Alves  <palves@redhat.com>

	* linux-nat.c (lin_lwp_attach_lwp): No longer special case the
	main LWP.  Handle the case of waitpid returning 0 if we're already
	attached to the LWP.  Don't set the LWP's last_resume_kind to
	resume_stop if we already knew about the LWP.
	(linux_nat_filter_event): Add debug logs.

2015-02-20  Pedro Alves  <palves@redhat.com>

	* target.h (forward_target_decr_pc_after_break): Delete
	declaration.

2015-02-20  Pedro Alves  <palves@redhat.com>

	PR threads/18006
	* linux-thread-db.c (thread_get_info_callback): Return early if
	the thread's lwp id is -1.

2015-02-20  Joel Brobecker  <brobecker@adacore.com>

	GDB 7.9 released.

2015-02-19  Steve Ellcey  <sellcey@imgtec.com>

	* dtrace-probe.c (dtrace_process_dof_probe): Initialize arg.expr.
	(dtrace_get_probes) Change type of variable 'dof'.

2015-02-19  Antoine Tremblay  <antoine.tremblay@ericsson.com>

	PR breakpoints/16812
	* linux-nat.c (linux_nat_filter_event): Report SIGTRAP,SIGILL,SIGSEGV.
	* nat/linux-ptrace.c (linux_wstatus_maybe_breakpoint): Add.
	* nat/linux-ptrace.h: Add linux_wstatus_maybe_breakpoint.

2015-02-19  David Taylor  <dtaylor@emc.com>

	* common/ax.def (setv): Fix consumed entry in setv DEFOP.

2015-02-18  Patrick Palka  <patrick@parcs.ath.cx>

	* tui/tui-io.c (tui_handle_resize_during_io): Remove this
	function.
	(tui_putc): Don't call tui_handle_resize_during_io.
	(tui_getc): Likewise.
	(tui_mld_getc): Likewise.
	* tui/tui-win.c: Include event-loop.h and tui/tui-io.h.
	(tui_sigwinch_token): New static variable.
	(tui_initialize_win): Adjust documentation.  Set
	tui_sigwinch_token.
	(tui_async_resize_screen): New asynchronous callback.
	(tui_sigwinch_handler): Adjust documentation.  Asynchronously
	invoke tui_async_resize_screen.

2015-02-18  Jose E. Marchesi  <jose.marchesi@oracle.com>

	* configure: Regenerated.
	* configure.ac: Use GDB_AC_TRANSFORM.
	* Makefile.in (aclocal_m4_deps): Added transform.m4.
	* acinclude.m4: sinclude transform.m4.
	* transform.m4: New file.
	(GDB_AC_TRANSFORM): New macro.

2015-02-17  Jose E. Marchesi  <jose.marchesi@oracle.com>

	* NEWS: Announce the support for DTrace SDT probes.

2015-02-17  Jose E. Marchesi  <jose.marchesi@oracle.com>

	* amd64-linux-tdep.c: Include "parser-defs.h" and "user-regs.h".
	(amd64_dtrace_parse_probe_argument): New function.
	(amd64_dtrace_probe_is_enabled): Likewise.
	(amd64_dtrace_enable_probe): Likewise.
	(amd64_dtrace_disable_probe): Likewise.
	(amd64_linux_init_abi): Register the
	`gdbarch_dtrace_probe_argument', `gdbarch_dtrace_enable_probe',
	`gdbarch_dtrace_disable_probe' and
	`gdbarch_dtrace_probe_is_enabled' hooks.
	(amd64_dtrace_disabled_probe_sequence_1): New constant.
	(amd64_dtrace_disabled_probe_sequence_2): Likewise.
	(amd64_dtrace_enable_probe_sequence): Likewise.
	(amd64_dtrace_disable_probe_sequence): Likewise.

2015-01-17  Jose E. Marchesi  <jose.marchesi@oracle.com>

	* breakpoint.c (BREAK_ARGS_HELP): Help string updated to mention
	the -probe-dtrace new vpossible value for PROBE_MODIFIER.
	* configure.ac (CONFIG_OBS): dtrace-probe.o added if BFD can
	handle ELF files.
	* Makefile.in (SFILES): dtrace-probe.c added.
	* configure: Regenerate.
	* dtrace-probe.c: New file.
	(SHT_SUNW_dof): New constant.
	(dtrace_probe_type): New enum.
	(dtrace_probe_arg): New struct.
	(dtrace_probe_arg_s): New typedef.
	(struct dtrace_probe_enabler): New struct.
	(dtrace_probe_enabler_s): New typedef.
	(dtrace_probe): New struct.
	(dtrace_probe_is_linespec): New function.
	(dtrace_dof_sect_type): New enum.
	(dtrace_dof_dofh_ident): Likewise.
	(dtrace_dof_encoding): Likewise.
	(DTRACE_DOF_ENCODE_LSB): Likewise.
	(DTRACE_DOF_ENCODE_MSB): Likewise.
	(dtrace_dof_hdr): New struct.
	(dtrace_dof_sect): Likewise.
	(dtrace_dof_provider): Likewise.
	(dtrace_dof_probe): Likewise.
	(DOF_UINT): New macro.
	(DTRACE_DOF_PTR): Likewise.
	(DTRACE_DOF_SECT): Likewise.
	(dtrace_process_dof_probe): New function.
	(dtrace_process_dof): Likewise.
	(dtrace_build_arg_exprs): Likewise.
	(dtrace_get_arg): Likewise.
	(dtrace_get_probes): Likewise.
	(dtrace_get_probe_argument_count): Likewise.
	(dtrace_can_evaluate_probe_arguments): Likewise.
	(dtrace_evaluate_probe_argument): Likewise.
	(dtrace_compile_to_ax): Likewise.
	(dtrace_probe_destroy): Likewise.
	(dtrace_gen_info_probes_table_header): Likewise.
	(dtrace_gen_info_probes_table_values): Likewise.
	(dtrace_probe_is_enabled): Likewise.
	(dtrace_probe_ops): New variable.
	(info_probes_dtrace_command): New function.
	(_initialize_dtrace_probe): Likewise.
	(dtrace_type_name): Likewise.

2015-02-17  Jose E. Marchesi  <jose.marchesi@oracle.com>

	* gdbarch.sh (dtrace_parse_probe_argument): New.
	(dtrace_probe_is_enabled): Likewise.
	(dtrace_enable_probe): Likewise.
	(dtrace_disable_probe): Likewise.
	* gdbarch.c: Regenerate.
	* gdbarch.h: Regenerate.

2015-02-17  Jose E. Marchesi  <jose.marchesi@oracle.com>

	* stap-probe.c (stap_probe_ops): Add NULLs in the static
	stap_probe_ops for `enable_probe' and `disable_probe'.
	* probe.c (enable_probes_command): New function.
	(disable_probes_command): Likewise.
	(_initialize_probe): Define the cli commands `enable probe' and
	`disable probe'.
	(parse_probe_linespec): New function.
	(info_probes_for_ops): Use parse_probe_linespec.
	* probe.h (probe_ops): New hooks `enable_probe' and
	`disable_probe'.

2015-02-17  Jose E. Marchesi  <jose.marchesi@oracle.com>

	* probe.c (compute_probe_arg): Moved from stap-probe.c
	(compile_probe_arg): Likewise.
	(probe_funcs): Likewise.
	* stap-probe.c (compute_probe_arg): Moved to probe.c.
	(compile_probe_arg): Likewise.
	(probe_funcs): Likewise.

2015-02-17  Jose E. Marchesi  <jose.marchesi@oracle.com>

	* probe.c (print_ui_out_not_applicables): New function.
	(exists_probe_with_pops): Likewise.
	(info_probes_for_ops): Do not include column headers for probe
	types for which no probe has been actually found on any object.
	Also invoke `print_ui_out_not_applicables' in order to match the
	column rows with the header when probes of several types are
	listed.
	Print the "Type" column.
	* probe.h (probe_ops): Added a new probe operation `type_name'.
	* stap-probe.c (stap_probe_ops): Add `stap_type_name'.
	(stap_type_name): New function.

2015-02-17  Patrick Palka  <patrick@parcs.ath.cx>

	* tui/tui-io.c (tui_getc): Don't call key_is_command_char.
	(key_is_command_char): Delete.

2015-02-17  Pedro Alves  <palves@redhat.com>

	* tui/tui.c (tui_enable): Resize windows before anything
	might show a window.

2015-02-17  Max Ostapenko  <m.ostapenko@partner.samsung.com>

	PR gdb/17984
	* aarch64-linux-nat.c: Don't include features/aarch64.c anymore.
	(aarch64_linux_read_description): Remove initialize_tdesc_aarch64
	call.
	* aarch64-tdep.h (tdesc_aarch64): Declare.

2015-02-12  Mark Wielaard  <mjw@redhat.com>

	* contrib/ari/gdb_ari.sh: Remove checks for "true" and "false".

2015-02-13  Doug Evans  <dje@google.com>

	* cp-namespace.c (cp_basic_lookup_symbol): Rename parameter
	anonymous_namespace to is_in_anonymous for consistency with the rest
	of the file.
	(cp_lookup_bare_symbol): Fix typo in comment.
	(cp_search_static_and_baseclasses): Ditto.
	(search_symbol_list): Use vertical space in comment better.
	(reset_directive_searched): Ditto. Fix typo.
	(cp_lookup_nested_symbol_1): Clarify contents of NESTED_NAME parameter.

2015-02-13  Yao Qi  <yao.qi@arm.com>

	* MAINTAINERS: Update my email address.

2015-02-12  Doug Evans  <dje@google.com>

	* symtab.c (completion_list_add_name): Fix memory leak.

2015-02-12  Doug Evans  <dje@google.com>

	* completer.c (complete_line): Remove incorrect comment.

2015-02-11  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* python/py-framefilter.c (py_print_single_arg, enumerate_locals)
	(py_print_frame): Use RETURN_MASK_ERROR.

2015-02-11  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* python/py-framefilter.c (py_print_frame): Mention RETURN_QUIT in
	function comment.  Wrap all function that can throw in cleanups.
	(gdbpy_apply_frame_filter): Wrap all function that can throw in
	cleanups.

2015-02-11  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* python/py-framefilter.c (py_print_frame): Substitute goto error.
	Remove the error label.

2015-02-11  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* python/py-framefilter.c (py_print_frame): Put conditional code paths
	with goto first, indent the former else codepath left.  Put variable
	'elided' to a new inner block.

2015-02-11  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* python/py-framefilter.c (py_print_frame): Whitespacing fixes.

2015-02-11  Pedro Alves  <palves@redhat.com>

	* xcoffread.c (within_function): Delete.

2015-02-11  Tom Tromey  <tromey@redhat.com>
	    Pedro Alves <palves@redhat.com>

	* breakpoint.c (base_breakpoint_ops): Delete.
	* dwarf2loc.c (dwarf_expr_ctx_funcs): Make extern.
	* elfread.c (elf_sym_fns_gdb_index, elf_sym_fns_lazy_psyms): Make extern.
	* guile/guile.c (guile_extension_script_ops, guile_extension_ops): Make extern.
	* ppcnbsd-tdep.c (ppcnbsd2_sigtramp): Make extern.
	* python/py-arch.c (arch_object_type): Make extern.
	* python/py-block.c (block_syms_iterator_object_type): Make extern.
	* python/py-bpevent.c (breakpoint_event_object_type): Make extern.
	* python/py-cmd.c (cmdpy_object_type): Make extern.
	* python/py-continueevent.c (continue_event_object_type)
	* python/py-event.h (GDBPY_NEW_EVENT_TYPE): Remove 'qual'
	parameter.  Update all callers.
	* python/py-evtregistry.c (eventregistry_object_type): Make extern.
	* python/py-exitedevent.c (exited_event_object_type): Make extern.
	* python/py-finishbreakpoint.c (finish_breakpoint_object_type): Make extern.
	* python/py-function.c (fnpy_object_type): Make extern.
	* python/py-inferior.c (inferior_object_type, membuf_object_type): Make extern.
	* python/py-infevents.c (call_pre_event_object_type)
	(inferior_call_post_event_object_type).
	(memory_changed_event_object_type): Make extern.
	* python/py-infthread.c (thread_object_type): Make extern.
	* python/py-lazy-string.c (lazy_string_object_type): Make extern.
	* python/py-linetable.c (linetable_entry_object_type)
	(linetable_object_type, ltpy_iterator_object_type): Make extern.
	* python/py-newobjfileevent.c (new_objfile_event_object_type)
	(clear_objfiles_event_object_type): Make extern.
	* python/py-objfile.c (objfile_object_type): Make extern.
	* python/py-param.c (parmpy_object_type): Make extern.
	* python/py-progspace.c (pspace_object_type): Make extern.
	* python/py-signalevent.c (signal_event_object_type): Make extern.
	* python/py-symtab.c (symtab_object_type, sal_object_type): Make extern.
	* python/py-type.c (type_object_type, field_object_type)
	(type_iterator_object_type): Make extern.
	* python/python.c (python_extension_script_ops)
	(python_extension_ops): Make extern.
	* stap-probe.c (stap_probe_ops): Make extern.

2015-02-11  Pedro Alves  <pedro@codesourcery.com>

	* infrun.c (adjust_pc_after_break): Don't adjust the PC just
	because the event thread is not the current thread.

2015-02-11  Doug Evans  <xdje42@gmail.com>

	* gdbtypes.c (internal_type_self_type): If TYPE_SPECIFIC_FIELD hasn't
	been initialized yet, return NULL.

2015-02-11  Doug Evans  <dje@google.com>

	* symfile.h (new_symfile_objfile): Delete.
	* symfile.c (finish_new_objfile): Renamed from new_symfile_objfile.
	All callers updated.

2015-02-11  Patrick Palka  <patrick@parcs.ath.cx>

	* tui/tui-io.c (tui_handle_resize_during_io): Call
	tui_update_gdb_sizes() after resizing the screen.
	* tui/tui.c (tui_enable): Resize the terminal before
	calling tui_update_gdb_sizes().

2015-02-11  Patrick Palka  <patrick@parcs.ath.cx>

	* tui/tui-io.c (tui_getc): Move cursor to the end of the command
	line before printing a newline.

2015-02-11  Mark Wielaard  <mjw@redhat.com>

	* utils.c (producer_is_gcc): Return true or false.

2015-02-10  Mark Wielaard  <mjw@redhat.com>

	* utils.h (producer_is_gcc): Change return type to bool. Add major
	argument.
	* utils.c (producer_is_gcc): Likewise.
	(producer_is_gcc_ge_4): Adjust producer_is_gcc call.
	* dwarf2read.c (check_producer): Likewise.

2015-02-10  Pedro Alves  <palves@redhat.com>

	* infrun.c (displaced_step_fixup): Switch to the event thread
	before calling gdbarch_displaced_step_fixup.

2015-02-10  Antoine Tremblay <antoine.tremblay@ericsson.com>

	* MAINTAINERS (Write After Approval): Add Antoine Tremblay.

2015-02-10  Simon Marchi  <simon.marchi@ericsson.com>

	* ada-varobj.c (ada_name_of_child): Constify parent.
	(ada_path_expr_of_child): Same.
	(ada_value_of_child): Same.
	(ada_type_of_child): Same.
	* c-varobj.c (c_is_path_expr_parent): Same.
	(c_describe_child): Same.
	(c_name_of_child): Same.
	(c_value_of_child): Same.
	(c_type_of_child): Same.
	(cplus_number_of_children): Same.
	(cplus_describe_child): Constify var.
	(cplus_name_of_child): Constify parent.
	(cplus_value_of_child): Same.
	(cplus_type_of_child): Same.
	* jv-varobj.c (java_name_of_child): Same.
	(java_value_of_child): Same.
	(java_type_of_child): Same.
	* varobj.c (value_of_child): Same.
	(varobj_default_is_path_expr_parent): Constify var, parent and return
	value.
	(varobj_get_path_expr): Constify var, modify path_expr through
	mutable_var.
	(install_new_value): Constify parent.
	(value_of_child): Constify parent.
	* varobj.h (struct varobj): Constify parent.
	(struct lang_varobj_ops): Constify name_of_child, value_of_child and
	type_of_child.
	(varobj_get_path_expr): Constify var.
	(varobj_get_path_expr_parent): Constify var and return value.

2015-02-10  Luis Machado  <lgustavo@codesourcery.com>

	* arm-tdep.c (arm_prologue_unwind_stop_reason): New function.
	(arm_prologue_this_id): Move PC and SP limit checks to
	arm_prologue_unwind_stop_reason.
	(arm_prologue_unwind) <stop_reason> : Set to
	arm_prologue_unwind_stop_reason.

2015-02-09  Mark Wielaard  <mjw@redhat.com>

	* dwarf2read.c (set_cu_language): Recognize DW_LANG_Fortran03 and
	DW_LANG_Fortran08 as language_fortran.

2015-02-09  Sergio Durigan Junior  <sergiodj@redhat.com>

	PR remote/17946
	* gdb/remote.c (remote_parse_stop_reply): Fix wrong comparison
	of pointer against char.

2015-02-09  Mark Wielaard  <mjw@redhat.com>

	* c-typeprint.c (cp_type_print_method_args): Handle '_Atomic'.
	(c_type_print_modifier): Likewise.
	* dwarf2read.c (read_tag_atomic_type): New function.
	(read_type_die_1): Handle DW_TAG_atomic_type.
	* gdbtypes.c (make_atomic_type): New function.
	(recursive_dump_type): Handle TYPE_ATOMIC.
	* gdbtypes.h (enum type_flag_values): Renumber.
	(enum type_instance_flag_value): Add TYPE_INSTANCE_FLAG_ATOMIC.
	(TYPE_ATOMIC): New macro.
	(make_atomic_type): Declare.

2015-02-09  Markus Metzger  <markus.t.metzger@intel.com>

	* btrace.c (ftrace_find_call): Skip gaps.
	(ftrace_new_function): Initialize level.
	(ftrace_new_call, ftrace_new_tailcall, ftrace_new_return)
	(ftrace_new_switch): Update
	level computation.
	(ftrace_new_gap): New.
	(ftrace_update_function): Create new function after gap.
	(btrace_compute_ftrace_bts): Create gap on error.
	(btrace_stitch_bts): Update parameters.  Clear trace if it
	becomes empty.
	(btrace_stitch_trace): Update parameters.  Update callers.
	(btrace_clear): Reset the number of gaps.
	(btrace_insn_get): Return NULL if the iterator points to a gap.
	(btrace_insn_number): Return zero if the iterator points to a gap.
	(btrace_insn_end): Allow gaps at the end.
	(btrace_insn_next, btrace_insn_prev, btrace_insn_cmp): Handle gaps.
	(btrace_find_insn_by_number): Assert that the found iterator does
	not point to a gap.
	(btrace_call_next, btrace_call_prev): Assert that the last function
	is not a gap.
	* btrace.h (btrace_bts_error): New.
	(btrace_function): Update comment.
	(btrace_function) <insn, insn_offset, number>: Update comment.
	(btrace_function) <errcode>: New.
	(btrace_thread_info) <ngaps>: New.
	(btrace_thread_info) <replay>: Update comment.
	(btrace_insn_get): Update comment.
	* record-btrace.c (btrace_ui_out_decode_error): New.
	(record_btrace_info): Print number of gaps.
	(btrace_insn_history, btrace_call_history): Call
	btrace_ui_out_decode_error for gaps.
	(record_btrace_step_thread, record_btrace_start_replaying): Skip gaps.

2015-02-09  Markus Metzger  <markus.t.metzger@intel.com>

	* common/btrace-common.h (btrace_cpu_vendor, btrace_cpu): New.
	* nat/linux-btrace.c: (btrace_this_cpu): New.
	(cpu_supports_bts): Call btrace_this_cpu.
	(intel_supports_bts): Add cpu parameter.

2015-02-09  Markus Metzger  <markus.t.metzger@intel.com>

	* btrace.h (btrace_insn_class): New.
	(btrace_insn) <size, iclass>: New.
	* btrace.c (ftrace_find_call): Update parameters.  Update users.
	Use instruction classification.
	(ftrace_new_return): Update parameters.  Update users.
	(ftrace_update_function): Update parameters.  Update users.  Use
	instruction classification.
	(ftrace_update_insns): Update parameters.  Update users.
	(ftrace_classify_insn): New.
	(btrace_compute_ftrace_bts): Fill in new btrace_insn fields.  Add
	TRY_CATCH around call to gdb_insn_length.

2015-02-09  Markus Metzger  <markus.t.metzger@intel.com>

	* btrace.c (btrace_compute_ftrace_bts, btrace_compute_ftrace):
	Update parameters.  Update users.

2015-02-09  Markus Metzger  <markus.t.metzger@intel.com>

	* btrace.c (parse_xml_btrace_conf_bts): Add size.
	(btrace_conf_bts_attributes): New.
	(btrace_conf_children): Add attributes.
	* common/btrace-common.h (btrace_config_bts): New.
	(btrace_config)<bts>: New.
	(btrace_config): Update comment.
	* nat/linux-btrace.c (linux_enable_btrace, linux_enable_bts):
	Use config.
	* features/btrace-conf.dtd: Increment version.  Add size
	attribute to bts element.
	* record-btrace.c (set_record_btrace_bts_cmdlist,
	show_record_btrace_bts_cmdlist): New.
	(record_btrace_adjust_size, record_btrace_print_bts_conf,
	record_btrace_print_conf, cmd_set_record_btrace_bts,
	cmd_show_record_btrace_bts): New.
	(record_btrace_info): Call record_btrace_print_conf.
	(_initialize_record_btrace): Add commands.
	* remote.c: Add PACKET_Qbtrace_conf_bts_size enum.
	(remote_protocol_features): Add Qbtrace-conf:bts:size packet.
	(btrace_sync_conf): Synchronize bts size.
	(_initialize_remote): Add Qbtrace-conf:bts:size packet.
	* NEWS: Announce new commands and new packets.

2015-02-09  Markus Metzger  <markus.t.metzger@intel.com>

	* Makefile.in (XMLFILES): Add btrace-conf.dtd.
	* x86-linux-nat.c (x86_linux_enable_btrace): Update parameters.
	(x86_linux_btrace_conf): New.
	(x86_linux_create_target): Initialize to_btrace_conf.
	* nat/linux-btrace.c (linux_enable_btrace): Update parameters.
	Check format.  Split into this and ...
	(linux_enable_bts): ... this.
	(linux_btrace_conf): New.
	(perf_event_skip_record): Renamed into ...
	(perf_event_skip_bts_record): ... this.  Updated users.
	(linux_disable_btrace): Split into this and ...
	(linux_disable_bts): ... this.
	(linux_read_btrace): Check format.
	* nat/linux-btrace.h (linux_enable_btrace): Update parameters.
	(linux_btrace_conf): New.
	(btrace_target_info)<ptid>: Moved.
	(btrace_target_info)<conf>: New.
	(btrace_target_info): Split into this and ...
	(btrace_tinfo_bts): ... this.  Updated users.
	* btrace.c (btrace_enable): Update parameters.
	(btrace_conf, parse_xml_btrace_conf_bts, parse_xml_btrace_conf)
	(btrace_conf_children, btrace_conf_attributes)
	(btrace_conf_elements): New.
	* btrace.h (btrace_enable): Update parameters.
	(btrace_conf, parse_xml_btrace_conf): New.
	* common/btrace-common.h (btrace_config): New.
	* feature/btrace-conf.dtd: New.
	* record-btrace.c (record_btrace_conf): New.
	(record_btrace_cmdlist): New.
	(record_btrace_enable_warn, record_btrace_open): Pass
	&record_btrace_conf.
	(record_btrace_info): Print recording format.
	(cmd_record_btrace_bts_start): New.
	(cmd_record_btrace_start): Call cmd_record_btrace_bts_start.
	(_initialize_record_btrace): Add "record btrace bts" subcommand.
	Add "record bts" alias command.
	* remote.c (remote_state)<btrace_config>: New.
	(remote_btrace_reset, PACKET_qXfer_btrace_conf): New.
	(remote_protocol_features): Add qXfer:btrace-conf:read.
	(remote_open_1): Call remote_btrace_reset.
	(remote_xfer_partial): Handle TARGET_OBJECT_BTRACE_CONF.
	(btrace_target_info)<conf>: New.
	(btrace_sync_conf, btrace_read_config): New.
	(remote_enable_btrace): Update parameters.  Call btrace_sync_conf and
	btrace_read_conf.
	(remote_btrace_conf): New.
	(init_remote_ops): Initialize to_btrace_conf.
	(_initialize_remote): Add qXfer:btrace-conf packet.
	* target.c (target_enable_btrace): Update parameters.
	(target_btrace_conf): New.
	* target.h (target_enable_btrace): Update parameters.
	(target_btrace_conf): New.
	(target_object)<TARGET_OBJECT_BTRACE_CONF>: New.
	(target_ops)<to_enable_btrace>: Update parameters and comment.
	(target_ops)<to_btrace_conf>: New.
	* target-delegates: Regenerate.
	* target-debug.h (target_debug_print_const_struct_btrace_config_p)
	(target_debug_print_const_struct_btrace_target_info_p): New.
	* NEWS: Announce new command and new packet.

2015-02-09  Markus Metzger  <markus.t.metzger@intel.com>

	* nat/linux-btrace.h (perf_event_buffer): New.
	(btrace_target_info) <buffer, size, data_head>: Replace with ...
	<bts>: ... this.
	* nat/linux-btrace.c (perf_event_header, perf_event_mmap_size)
	(perf_event_buffer_size, perf_event_buffer_begin)
	(perf_event_buffer_end, linux_btrace_has_changed): Removed.
	Updated users.
	(perf_event_new_data): New.

2015-02-09  Markus Metzger  <markus.t.metzger@intel.com>

	* btrace.c (btrace_enable): Pass BTRACE_FORMAT_BTS.
	* record-btrace.c (record_btrace_open): Remove call to
	target_supports_btrace.
	* remote.c (remote_supports_btrace): Update parameters.
	* target.c (target_supports_btrace): Update parameters.
	* target.h (to_supports_btrace, target_supports_btrace): Update
	parameters.
	* target-delegates.c: Regenerate.
	* target-debug.h (target_debug_print_enum_btrace_format): New.
	* nat/linux-btrace.c
	(kernel_supports_btrace): Rename into ...
	(kernel_supports_bts): ... this.  Update users.  Update warning text.
	(intel_supports_btrace): Rename into ...
	(intel_supports_bts): ... this.  Update users.
	(cpu_supports_btrace): Rename into ...
	(cpu_supports_bts): ... this.  Update users.
	(linux_supports_btrace): Update parameters.  Split into this and ...
	(linux_supports_bts): ... this.
	* nat/linux-btrace.h (linux_supports_btrace): Update parameters.

2015-02-09  Markus Metzger  <markus.t.metzger@intel.com>

	* Makefile.in (SFILES): Add common/btrace-common.c.
	(COMMON_OBS): Add common/btrace-common.o.
	(btrace-common.o): Add build rules.
	* btrace.c (parse_xml_btrace): Update parameters.
	(parse_xml_btrace_block): Set format field.
	(btrace_add_pc, btrace_fetch): Use struct btrace_data.
	(do_btrace_data_cleanup, make_cleanup_btrace_data): New.
	(btrace_compute_ftrace): Split into this and...
	(btrace_compute_ftrace_bts): ...this.
	(btrace_stitch_trace): Split into this and...
	(btrace_stitch_bts): ...this.
	* btrace.h (parse_xml_btrace): Update parameters.
	(make_cleanup_btrace_data): New.
	* common/btrace-common.c: New.
	* common/btrace-common.h: Include common-defs.h.
	(btrace_block_s): Update comment.
	(btrace_format): New.
	(btrace_format_string): New.
	(btrace_data_bts): New.
	(btrace_data): New.
	(btrace_data_init, btrace_data_fini, btrace_data_empty): New.
	* remote.c (remote_read_btrace): Update parameters.
	* target.c (target_read_btrace): Update parameters.
	* target.h (target_read_btrace): Update parameters.
	(target_ops)<to_read_btrace>: Update parameters.
	* x86-linux-nat.c (x86_linux_read_btrace): Update parameters.
	* target-delegates.c: Regenerate.
	* target-debug (target_debug_print_struct_btrace_data_p): New.
	* nat/linux-btrace.c (linux_read_btrace): Split into this and...
	(linux_read_bts): ...this.
	* nat/linux-btrace.h (linux_read_btrace): Update parameters.

2015-02-06  Doug Evans  <dje@google.com>

	* remote-m32r-sdi.c: Include symfile.h.

2015-02-06  Doug Evans  <dje@google.com>

	* symtab.h (clear_symtab_users, deduce_language_from_filename): Move
	* symfile.h (clear_symtab_users, deduce_language_from_filename): ...
	to here.

2015-02-06  Pedro Alves  <palves@redhat.com>

	* linux-thread-db.c (find_new_threads_callback): Add debug output.

2015-02-06  Simon Marchi  <simon.marchi@ericsson.com>

	PR gdb/15678
	* breakpoint.c (map_breakpoint_numbers): Check for empty args string.
	(enable_count_command): Check args for NULL value.

2015-02-05  Doug Evans  <xdje42@gmail.com>

	* guile/scm-frame.c: Fix spelling errors in a comment.

2015-02-04  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* python/python-internal.h (Py_hash_t): Define it for Python <3.2.
	* python/py-value.c (valpy_fetch_lazy): Use it.  Remove cast to the
	return type.

2015-02-04  Pedro Alves  <palves@redhat.com>

	* linux-nat.c (handle_extended_wait): Don't resume LWPs here.
	(wait_lwp): Don't call wait_lwp if linux_handle_extended_wait
	returns true.
	(resume_stopped_resumed_lwps): Don't check whether the thread is
	marked as executing.
	(linux_nat_wait_1): Use resume_stopped_resumed_lwps.

2015-02-04  Andreas Arnez  <arnez@linux.vnet.ibm.com>

	* regset.h (struct regset): Add flags field.
	(REGSET_VARIABLE_SIZE): New value for a regset's flags field.
	* corelow.c (get_core_register_section): Add warning if the size
	exceeds the requested size and the regset does not have the
	REGSET_VARIABLE_SIZE flag set.
	* alphanbsd-tdep.c (alphanbsd_gregset): Add REGSET_VARIABLE_SIZE
	flag.
	* armbsd-tdep.c (armbsd_gregset): Likewise.
	* hppa-hpux-tdep.c (hppa_hpux_regset): Likewise.
	* hppaobsd-tdep.c (hppaobsd_gregset): Likewise.
	* m68kbsd-tdep.c (m68kbsd_gregset): Likewise.
	* mipsnbsd-tdep.c (mipsnbsd_gregset): Likewise.

2015-02-04  Andreas Arnez  <arnez@linux.vnet.ibm.com>

	* amd64-linux-tdep.c (amd64_linux_iterate_over_regset_sections):
	For ".reg-xstate", explicitly specify the requested section size
	via X86_XSTATE_SIZE instead of just 0 on input and
	X86_XSTATE_MAX_SIZE on output.
	* i386-linux-tdep.c (i386_linux_iterate_over_regset_sections):
	Likewise.

2015-02-04  Andreas Arnez  <arnez@linux.vnet.ibm.com>

	PR corefiles/17808:
	* gdbarch.sh (iterate_over_regset_sections_cb): Document this
	function type, particularly its SIZE parameter.
	* gdbarch.h: Regenerate.
	* amd64-tdep.c (amd64_supply_fpregset): In gdb_assert, compare
	actual against required size using ">=" instead of "==".
	(amd64_collect_fpregset): Likewise.
	* i386-tdep.c (i386_supply_gregset): Likewise.
	(i386_collect_gregset): Likewise.
	(i386_supply_fpregset): Likewise.
	(i386_collect_fpregset): Likewise.
	* mips-linux-tdep.c (mips_supply_gregset_wrapper): Likewise.
	(mips_fill_gregset_wrapper): Likewise.
	(mips_supply_fpregset_wrapper): Likewise.
	(mips_fill_fpregset_wrapper): Likewise.
	(mips64_supply_gregset_wrapper): Likewise.
	(mips64_fill_gregset_wrapper): Likewise.
	(mips64_supply_fpregset_wrapper): Likewise.
	(mips64_fill_fpregset_wrapper): Likewise.
	* mn10300-linux-tdep.c (am33_supply_gregset_method): Likewise.
	(am33_supply_fpregset_method): Likewise.
	(am33_collect_gregset_method): Likewise.
	(am33_collect_fpregset_method): Likewise.

2015-02-04  Doug Evans  <dje@google.com>
	    Pedro Alves  <palves@redhat.com>
	    Eli Zaretskii  <eliz@gnu.org>

	PR tui/17810
	* tui/tui-command.c (tui_refresh_cmd_win): New function.
	* tui/tui-command.c (tui_refresh_cmd_win): Declare.
	* tui/tui-file.c: #include tui/tui-command.h.
	(tui_file_fputs): Refresh command window if stream is not gdb_stdout.
	(tui_file_flush): Refresh command window if stream is gdb_stdout.
	* tui/tui-io.c (tui_puts): Remove calls to wrefresh, fflush.

2015-02-04  Pedro Alves  <palves@redhat.com>

	Fix build breakage.
	* event-loop.c (gdb_do_one_event): Add default switch case.

2015-02-03  Jan Kratochvil  <jan.kratochvil@redhat.com>

	Filter out inferior gcc option -fpreprocessed.
	* compile/compile.c (filter_args): New function.
	(get_args): Use it.

2015-02-03  Pedro Alves  <palves@redhat.com>

	* event-loop.c: Don't declare nor define a queue type for
	gdb_event_p.
	(event_queue): Delete.
	(create_event, create_file_event, gdb_event_xfree)
	(initialize_event_loop, process_event): Delete.
	(gdb_do_one_event): Return as soon as one event is handled.
	(handle_file_event): Change prototype.  Used the passed in
	file_handler pointer and ready_mask instead of looping over all
	file handlers.
	(gdb_wait_for_event): Update the poll/select timeouts before
	blocking.  Run event handlers directly instead of queueing events.
	Return as soon as one event is handled.
	(struct async_event_handler_data): Delete.
	(invoke_async_event_handler): Delete.
	(check_async_event_handlers): Change return type to int.  Run
	event handlers directly instead of queueing events.  Return as
	soon as one event is handled.
	(handle_timer_event): Delete.
	(update_wait_timeout): New function, factored out from
	poll_timers.
	(poll_timers): Reimplement.
	* event-loop.h (initialize_event_loop): Delete declaration.
	* top.c (gdb_init): Don't call initialize_event_loop.

2015-02-03  Pedro Alves  <palves@redhat.com>

	* event-loop.c (clear_async_event_handler): New function.
	* event-loop.h (clear_async_event_handler): New declaration.
	* record-btrace.c (record_btrace_async): New function.
	(init_record_btrace_ops): Install record_btrace_async.
	* record-full.c (record_full_async): New function.
	(record_full_resume): Don't mark the async event source here.
	(init_record_full_ops): Install record_full_async.
	(record_full_core_resume): Don't mark the async event source here.
	(init_record_full_core_ops): Install record_full_async.
	* remote.c (remote_async): Mark and clear the async stop reply
	queue event-loop token as appropriate.

2015-02-03  Pedro Alves  <palves@redhat.com>

	* linux-nat.c (linux_child_follow_fork, linux_nat_wait_1): Use
	target_is_async_p instead of target_can_async.
	(linux_nat_wait): Use target_is_async_p instead of
	target_can_async.  Don't enable async here.
	* remote.c (interrupt_query, remote_wait, putpkt_binary): Use
	target_is_async_p instead of target_can_async.

2015-02-02  Simon Marchi  <simon.marchi@ericsson.com>

	* varobj.h (lang_varobj_ops): Mention which return values need
	to be freed.

2015-02-02  Joel Brobecker  <brobecker@adacore.com>

	* dwarf2loc.c (dwarf2_evaluate_property): Add i18n marker.

2015-02-02  Joel Brobecker  <brobecker@adacore.com>

	PR gdb/17856:
	* ada-lang.c (ada_lookup_symbol_list_worker): Do not re-cache
	results found in the cache.

2015-02-02  Joel Brobecker  <brobecker@adacore.com>

	PR gdb/17854:
	* ada-lang.c (ada_get_symbol_cache): Set pspace_data->sym_cache
	when allocating a new one.

2015-02-01  Tom Tromey  <tom@tromey.com>

	* MAINTAINERS: Remove myself.

2015-01-31  Doug Evans  <xdje42@gmail.com>

	* dwarf2read.c (process_structure_scope): Update setting of
	TYPE_VPTR_BASETYPE, TYPE_VPTR_FIELDNO.
	* gdbtypes.c (internal_type_vptr_fieldno): New function.
	(set_type_vptr_fieldno): New function.
	(internal_type_vptr_basetype): New function.
	(set_type_vptr_basetype): New function.
	(get_vptr_fieldno): Update setting of TYPE_VPTR_FIELDNO,
	TYPE_VPTR_BASETYPE.
	(allocate_cplus_struct_type): Initialize vptr_fieldno.
	(recursive_dump_type): Printing of vptr_fieldno, vptr_basetype ...
	(print_cplus_stuff): ... moved here.
	(copy_type_recursive): Don't copy TYPE_VPTR_BASETYPE.
	* gdbtypes.h (struct main_type): Members vptr_fieldno, vptr_basetype
	moved to ...
	(struct cplus_struct_type): ... here.  All uses updated.
	(TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE): Rewrite.
	(internal_type_vptr_fieldno, set_type_vptr_fieldno): Declare.
	(internal_type_vptr_basetype, set_type_vptr_basetype): Declare.
	* stabsread.c (read_tilde_fields): Update setting of
	TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE.

2015-01-31  Doug Evans  <xdje42@gmail.com>

	* cp-valprint.c (cp_find_class_member): Rename parameter domain_p
	to self_p.
	(cp_print_class_member): Rename local domain to self_type.
	* dwarf2read.c (quirk_gcc_member_function_pointer): Rename local
	domain_type to self_type.
	(set_die_type) <need_gnat_info>: Handle
	TYPE_CODE_METHODPTR, TYPE_CODE_MEMBERPTR, TYPE_CODE_METHOD.
	* gdb-gdb.py (StructMainTypePrettyPrinter): Handle
	TYPE_SPECIFIC_SELF_TYPE.
	* gdbtypes.c (internal_type_self_type): New function.
	(set_type_self_type): New function.
	(smash_to_memberptr_type): Rename parameter domain to self_type.
	Update setting of TYPE_SELF_TYPE.
	(smash_to_methodptr_type): Update setting of TYPE_SELF_TYPE.
	(smash_to_method_type): Rename parameter domain to self_type.
	Update setting of TYPE_SELF_TYPE.
	(check_stub_method): Call smash_to_method_type.
	(recursive_dump_type): Handle TYPE_SPECIFIC_SELF_TYPE.
	(copy_type_recursive): Ditto.
	* gdbtypes.h (enum type_specific_kind): New value
	TYPE_SPECIFIC_SELF_TYPE.
	(struct main_type) <type_specific>: New member self_type.
	(struct cplus_struct_type) <fn_field.type>: Update comment.
	(TYPE_SELF_TYPE): Rewrite.
	(internal_type_self_type, set_type_self_type): Declare.
	* gnu-v3-abi.c (gnuv3_print_method_ptr): Rename local domain to
	self_type.
	(gnuv3_method_ptr_to_value): Rename local domain_type to self_type.
	* m2-typeprint.c (m2_range): Replace TYPE_SELF_TYPE with
	TYPE_TARGET_TYPE.
	* stabsread.c (read_member_functions): Mark methods with
	TYPE_CODE_METHOD, not TYPE_CODE_FUNC.  Update setting of
	TYPE_SELF_TYPE.

2015-01-31  Doug Evans  <xdje42@gmail.com>

	* gdbtypes.h (TYPE_SELF_TYPE): Renamed from TYPE_DOMAIN_TYPE.
	All uses updated.

2015-01-31  Doug Evans  <xdje42@gmail.com>

	* gnu-v3-abi.c (gnuv3_dynamic_class): Assert only passed structs
	or unions.  Return zero if union.
	(gnuv3_get_vtable): Call check_typedef.  Assert only passed structs.
	(gnuv3_rtti_type): Pass already-check_typedef'd value to
	gnuv3_get_vtable.
	(compute_vtable_size): Assert only passed structs.
	(gnuv3_print_vtable): Don't call gnuv3_get_vtable for non-structs.

2015-01-31  Doug Evans  <xdje42@gmail.com>

	* gdbtypes.c (copy_type_recursive): Handle all TYPE_SPECIFIC_FIELD
	kinds.

2015-01-31  Gary Benson <gbenson@redhat.com>
	    Doug Evans  <dje@google.com>

	PR cli/9007
	PR cli/11920
	PR cli/15548
	* cli/cli-cmds.c (complete_command): Notify user if max-completions
	reached.
	* common/common-exceptions.h (enum errors)
	<MAX_COMPLETIONS_REACHED_ERROR>: New value.
	* completer.h (get_max_completions_reached_message): New declaration.
	(max_completions): Likewise.
	(completion_tracker_t): New typedef.
	(new_completion_tracker): New declaration.
	(make_cleanup_free_completion_tracker): Likewise.
	(maybe_add_completion_enum): New enum.
	(maybe_add_completion): New declaration.
	(throw_max_completions_reached_error): Likewise.
	* completer.c (max_completions): New global variable.
	(new_completion_tracker): New function.
	(free_completion_tracker): Likewise.
	(make_cleanup_free_completion_tracker): Likewise.
	(maybe_add_completions): Likewise.
	(throw_max_completions_reached_error): Likewise.
	(complete_line): Remove duplicates and limit result to max_completions
	entries.
	(get_max_completions_reached_message): New function.
	(gdb_display_match_list): Handle max_completions.
	(_initialize_completer): New declaration and function.
	* symtab.c: Include completer.h.
	(completion_tracker): New static variable.
	(completion_list_add_name): Call maybe_add_completion.
	(default_make_symbol_completion_list_break_on_1): Renamed from
	default_make_symbol_completion_list_break_on.  Maintain
	completion_tracker across calls to completion_list_add_name.
	(default_make_symbol_completion_list_break_on): New function.
	* top.c (init_main): Set rl_completion_display_matches_hook.
	* tui/tui-io.c: Include completer.h.
	(tui_old_rl_display_matches_hook): New static global.
	(tui_rl_display_match_list): Notify user if max-completions reached.
	(tui_setup_io): Save/restore rl_completion_display_matches_hook.
	* NEWS (New Options): Mention set/show max-completions.

2015-01-31  Gary Benson  <gbenson@redhat.com>

	* symtab.c (struct add_name_data) <code>: New field.
	Updated comments.
	(add_symtab_completions): New function.
	(symtab_expansion_callback): Likewise.
	(default_make_symbol_completion_list_break_on): Set datum.code.
	Move minimal symbol scan before calling expand_symtabs_matching.
	Scan known primary symtabs for externs and statics before calling
	expand_symtabs_matching.  Pass symtab_expansion_callback as
	expansion_notify argument to expand_symtabs_matching.  Do not scan
	primary symtabs for externs and statics after calling
	expand_symtabs_matching.

2015-01-31  Gary Benson  <gbenson@redhat.com>

	* symfile.h (expand_symtabs_exp_notify_ftype): New typedef.
	(struct quick_symbol_functions) <expand_symtabs_matching>:
	New argument expansion_notify.  All uses updated.
	(expand_symtabs_matching): New argument expansion_notify.
	All uses updated.
	* symfile-debug.c (debug_qf_expand_symtabs_matching):
	Also print expansion notify.
	* symtab.c (expand_symtabs_matching_via_partial): Call
	expansion_notify whenever a partial symbol table is expanded.
	* dwarf2read.c (dw2_expand_symtabs_matching): Call
	expansion_notify whenever a symbol table is instantiated.

2015-01-31  Doug Evans  <xdje42@gmail.com>

	* cli-out.c: #include completer.h, readline/readline.h.
	(cli_mld_crlf, cli_mld_putch, cli_mld_puts): New functions.
	(cli_mld_flush, cld_mld_erase_entire_line): Ditto.
	(cli_mld_beep, cli_mld_read_key, cli_display_match_list): Ditto.
	* cli-out.h (cli_display_match_list): Declare.
	* completer.c (MB_INVALIDCH, MB_NULLWCH): New macros.
	(ELLIPSIS_LEN): Ditto.
	(gdb_get_y_or_n, gdb_display_match_list_pager): New functions.
	(gdb_path_isdir, gdb_printable_part, gdb_fnwidth): Ditto.
	(gdb_fnprint, gdb_print_filename): Ditto.
	(gdb_complete_get_screenwidth, gdb_display_match_list_1): Ditto.
	(gdb_display_match_list): Ditto.
	* completer.h (mld_crlf_ftype, mld_putch_ftype): New typedefs.
	(mld_puts_ftype, mld_flush_ftype, mld_erase_entire_line_ftype): Ditto.
	(mld_beep_ftype, mld_read_key_ftype): Ditto.
	(match_list_displayer): New struct.
	(gdb_display_match_list): Declare.
	* top.c (init_main): Set rl_completion_display_matches_hook.
	* tui/tui-io.c: #include completer.h.
	(printable_part, PUTX, print_filename, get_y_or_n): Delete.
	(tui_mld_crlf, tui_mld_putch, tui_mld_puts): New functions.
	(tui_mld_flush, tui_mld_erase_entire_line, tui_mld_beep): Ditto.
	(tui_mld_getc, tui_mld_read_key): Ditto.
	(tui_rl_display_match_list): Rewrite.
	(tui_handle_resize_during_io): New arg for_completion.  All callers
	updated.

2015-01-31  Doug Evans  <xdje42@gmail.com>

	Add symbol lookup cache.
	* NEWS: Document new options and commands.
	* symtab.c (symbol_cache_key): New static global.
	(DEFAULT_SYMBOL_CACHE_SIZE, MAX_SYMBOL_CACHE_SIZE): New macros.
	(SYMBOL_LOOKUP_FAILED): New macro.
	(symbol_cache_slot_state): New enum.
	(block_symbol_cache): New struct.
	(symbol_cache): New struct.
	(new_symbol_cache_size, symbol_cache_size): New static globals.
	(hash_symbol_entry, eq_symbol_entry): New functions.
	(symbol_cache_byte_size, resize_symbol_cache): New functions.
	(make_symbol_cache, free_symbol_cache): New functions.
	(get_symbol_cache, symbol_cache_cleanup): New function.
	(set_symbol_cache_size, set_symbol_cache_size_handler): New functions.
	(symbol_cache_lookup, symbol_cache_clear_slot): New function.
	(symbol_cache_mark_found, symbol_cache_mark_not_found): New functions.
	(symbol_cache_flush, symbol_cache_dump): New functions.
	(maintenance_print_symbol_cache): New function.
	(maintenance_flush_symbol_cache): New function.
	(symbol_cache_stats): New function.
	(maintenance_print_symbol_cache_statistics): New function.
	(symtab_new_objfile_observer): New function.
	(symtab_free_objfile_observer): New function.
	(lookup_static_symbol, lookup_global_symbol): Use symbol cache.
	(_initialize_symtab): Init symbol_cache_key.  New parameter
	maint symbol-cache-size.  New maint commands print symbol-cache,
	print symbol-cache-statistics, flush-symbol-cache.
	Install new_objfile, free_objfile observers.

2015-01-31  Joel Brobecker  <brobecker@adacore.com>

	PR symtab/17855
	* symfile.c (clear_symtab_users): Move call to breakpoint_re_set
	to end.

2015-01-31  Doug Evans  <xdje42@gmail.com>

	* NEWS: Mention inlined scripts in .debug_gdb_scripts section.
	* auto-load.c: #include ctype.h.
	(struct auto_load_pspace_info): Replace member loaded_scripts with
	new members loaded_script_files, loaded_script_texts.
	(auto_load_pspace_data_cleanup): Update.
	(init_loaded_scripts_info): Update.
	(get_auto_load_pspace_data_for_loading): Update.
	(maybe_add_script_file): Renamed from maybe_add_script.  All callers
	updated.
	(maybe_add_script_text): New function.
	(clear_section_scripts): Update.
	(source_script_file, execute_script_contents): New functions.
	(source_section_scripts): Add support for
	SECTION_SCRIPT_ID_PYTHON_TEXT, SECTION_SCRIPT_ID_GUILE_TEXT.
	(print_scripts): New function.
	(auto_load_info_scripts): Also print inlined scripts.
	(maybe_print_unsupported_script_warning): Renamed from
	unsupported_script_warning_print.  All callers updated.
	(maybe_print_script_not_found_warning): Renamed from
	script_not_found_warning_print.  All callers updated.
	* extension-priv.h (struct extension_language_script_ops): New member
	objfile_script_executor.
	* extension.c (ext_lang_objfile_script_executor): New function.
	* extension.h (objfile_script_executor_func): New typedef.
	(ext_lang_objfile_script_executor): Declare.
	* guile/guile-internal.h (gdbscm_execute_objfile_script): Declare.
	* guile/guile.c (guile_extension_script_ops): Update.
	* guile/scm-objfile.c (gdbscm_execute_objfile_script): New function.
	* python/python.c (python_extension_script_ops): Update.
	(gdbpy_execute_objfile_script): New function.

2015-01-31  Eli Zaretskii  <eliz@gnu.org>

	* tui/tui-io.c (tui_expand_tabs): New function.
	(tui_puts, tui_redisplay_readline): Expand TABs into the
	appropriate number of spaces.
	* tui/tui-regs.c: Include tui-io.h.
	(tui_register_format): Call tui_expand_tabs to expand TABs into
	the appropriate number of spaces.
	* tui/tui-io.h: Add prototype for tui_expand_tabs.

2015-01-30  Doug Evans  <dje@google.com>

	* NEWS: "info source" command now display producer string if present.
	* source.c (source_info): Print producer string if present.

2015-01-30  Simon Marchi  <simon.marchi@ericsson.com>

	* varobj.c (varobj_delete): Fix comment.

2015-01-30  Simon Marchi  <simon.marchi@ericsson.com>

	* varobj.c (create_child): Modify comment.

2015-01-30  Simon Marchi  <simon.marchi@ericsson.com>

	* ada-varobj.c (ada_number_of_children): Constify struct varobj *
	parameter.
	(ada_name_of_variable): Same.
	(ada_path_expr_of_child): Same.
	(ada_value_of_variable): Same.
	(ada_value_is_changeable_p): Same.
	(ada_value_has_mutated): Same.
	* c-varobj.c (varobj_is_anonymous_child): Same.
	(c_is_path_expr_parent): Same.
	(c_number_of_children): Same.
	(c_name_of_variable): Same.
	(c_path_expr_of_child): Same.
	(get_type): Same.
	(c_value_of_variable): Same.
	(cplus_number_of_children): Same.
	(cplus_name_of_variable): Same.
	(cplus_path_expr_of_child): Same.
	(cplus_value_of_variable): Same.
	* jv-varobj.c (java_number_of_children): Same.
	(java_name_of_variable): Same.
	(java_path_expr_of_child): Same.
	(java_value_of_variable): Same.
	* varobj.c (number_of_children): Same.
	(name_of_variable): Same.
	(is_root_p): Same.
	(varobj_ensure_python_env): Same.
	(varobj_get_objname): Same.
	(varobj_get_expression): Same.
	(varobj_get_display_format): Same.
	(varobj_get_display_hint): Same.
	(varobj_has_more): Same.
	(varobj_get_thread_id): Same.
	(varobj_get_frozen): Same.
	(dynamic_varobj_has_child_method): Same.
	(varobj_get_gdb_type): Same.
	(is_path_expr_parent): Same.
	(varobj_default_is_path_expr_parent): Same.
	(varobj_get_language): Same.
	(varobj_get_attributes): Same.
	(varobj_is_dynamic_p): Same.
	(varobj_get_child_range): Same.
	(varobj_value_has_mutated): Same.
	(varobj_get_value_type): Same.
	(number_of_children): Same.
	(name_of_variable): Same.
	(check_scope): Same.
	(varobj_editable_p): Same.
	(varobj_value_is_changeable_p): Same.
	(varobj_floating_p): Same.
	(varobj_default_value_is_changeable_p): Same.

2015-01-30  Simon Marchi  <simon.marchi@ericsson.com>

	* varobj.c (varobj_get_path_expr): Set var->path_expr.
	* c-varobj.c (c_path_expr_of_child): Set local var instead of
	child->path_expr.
	(cplus_path_expr_of_child): Same.

2015-01-30  Simon Marchi  <simon.marchi@ericsson.com>

	* mi-cmd-var.c (print_varobj): Free varobj_get_expression
	result.
	(mi_cmd_var_info_expression): Same.
	* varobj.c (varobj_get_expression): Mention in the comment that
	the result must by freed by the caller.

2015-01-30  Simon Marchi  <simon.marchi@ericsson.com>

	* mi/mi-cmd-var.c (mi_cmd_var_info_type): Free result of
	varobj_get_type.
	(varobj_update_one): Same.
	* varobj.c (update_type_if_necessary): Free curr_type_str and
	new_type_str.
	(varobj_get_type): Specify in comment that the result needs to be
	freed by the caller.

2015-01-29  Doug Evans  <dje@google.com>

	PR symtab/17890
	* dwarf2read.c (dwarf_decode_line_header): Punt if version > 4.

2015-01-25  Mark Wielaard  <mjw@redhat.com>

	* dwarf2read.c (checkproducer): Call producer_is_gcc.
	* utils.c (producer_is_gcc_ge_4): Likewise.
	(producer_is_gcc): New function.
	* utils.h (producer_is_gcc): New declaration.

2015-01-29  Joel Brobecker  <brobecker@adacore.com>

	* gdbtypes.h (struct dynamic_prop): New PROP_ADDR_OFFSET enum
	kind.
	* gdbtypes.c (resolve_dynamic_type_internal): Replace "addr"
	parameter by "addr_stack" parameter.
	(resolve_dynamic_range): Replace "addr" parameter by
	"stack_addr" parameter.  Update function documentation.
	Update code accordingly.
	(resolve_dynamic_array, resolve_dynamic_union)
	(resolve_dynamic_struct, resolve_dynamic_type_internal): Likewise.
	(resolve_dynamic_type): Update code, following the changes made
	to resolve_dynamic_type_internal's interface.
	* dwarf2loc.h (struct property_addr_info): New.
	(dwarf2_evaluate_property): Replace "address" parameter
	by "addr_stack" parameter.  Adjust function documentation.
	(struct dwarf2_offset_baton): New.
	(struct dwarf2_property_baton): Update documentation of
	field "referenced_type" to be more general. New field
	"offset_info" in union data field.
	* dwarf2loc.c (dwarf2_evaluate_property): Replace "address"
	parameter by "addr_stack" parameter.  Adjust code accordingly.
	Add support for PROP_ADDR_OFFSET properties.
	* dwarf2read.c (attr_to_dynamic_prop): Add support for
	DW_AT_data_member_location attributes as well.  Use case
	statements instead of if/else condition.

2015-01-29  Joel Brobecker  <brobecker@adacore.com>

	* ada-varobj.c (ada_varobj_get_array_number_of_children):
	Return zero if PARENT_VALUE is NULL and parent_type's
	range type is dynamic.

2015-01-29  Joel Brobecker  <brobecker@adacore.com>

	* gdbtypes.c (is_dynamic_type_internal) <TYPE_CODE_RANGE>: Return
	nonzero if the type's subtype is dynamic.
	(resolve_dynamic_range): Also resolve the range's subtype.

2015-01-29  Alexander Klimov  <alserkli@inbox.ru>  (tiny patch)

	Pushed by Joel Brobecker  <brobecker@adacore.com>.
	* symfile.c (unmap_overlay_command): Initialize sec to NULL.

2015-01-27  Doug Evans  <dje@google.com>

	* NEWS: Mention gdb.Objfile.username.
	* python/py-objfile.c (objfpy_get_username): New function.
	(objfile_getset): Add "username".

2015-01-24  Mark Wielaard  <mjw@redhat.com>

	* stack.c (return_command): Markup warning message with _.

2015-01-24  Doug Evans  <xdje42@gmail.com>

	* gdbtypes.h (TYPE_TYPE_SPECIFIC): Delete.

2015-01-24  Jan Kratochvil  <jan.kratochvil@redhat.com>

	Fix 100x slowdown regression on DWZ files.
	* dwarf2read.c (struct dwarf2_per_objfile): Add line_header_hash.
	(struct line_header): Add offset and offset_in_dwz.
	(dwarf_decode_lines): Add parameter decode_mapping to the declaration.
	(free_line_header_voidp): New declaration.
	(line_header_hash, line_header_hash_voidp, line_header_eq_voidp): New
	functions.
	(dwarf2_build_include_psymtabs): Update dwarf_decode_lines caller.
	(handle_DW_AT_stmt_list): Use line_header_hash.
	(free_line_header_voidp): New function.
	(dwarf_decode_line_header): Initialize offset and offset_in_dwz.
	(dwarf_decode_lines): New parameter decode_mapping, use it.
	(dwarf2_free_objfile): Free line_header_hash.

2015-01-23  Simon Marchi  <simon.marchi@ericsson.com>

	PR gdb/17416
	* valops.c (value_rtti_indirect_type): Catch exception thrown by
	value_ind.

2015-01-15  Mark Wielaard  <mjw@redhat.com>

	* dwarf2read.c (read_subroutine_type): Set TYPE_NO_RETURN from
	DW_AT_noreturn.
	* gdbtypes.h (struct func_type): Add is_noreturn field flag. Make
	calling_convention an 8 bit bit field.
	(TYPE_NO_RETURN): New macro.
	* infcmd.c (finish_command): Query if function does not return
	normally.
	* stack.c (return_command): Likewise.

2015-01-23  Pedro Alves  <palves@redhat.com>

	* linux-nat.c (linux_is_async_p): New macro.
	(linux_nat_is_async_p):
	(linux_nat_terminal_inferior): Check whether the target can async
	instead of whether it is already async.
	(linux_nat_terminal_ours): Don't check whether the target is
	async.
	(linux_async_pipe): Use linux_is_async_p.

2015-01-22  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* NEWS (Changes since GDB 7.9): Add 'thread apply all' option
	'-ascending'.
	* thread.c (tp_array_compar_ascending, tp_array_compar): New.
	(thread_apply_all_command): Parse CMD for tp_array_compar_ascending.
	Sort tp_array using tp_array_compar.
	(_initialize_thread): Extend thread_apply_all_command help.

2015-01-22  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* corelow.c (core_open): Call also thread_command.
	* gdbthread.h (thread_command): New prototype moved from ...
	* thread.c (thread_command): ... here.
	(thread_command): Make it global.

2015-01-22  Pedro Alves  <palves@redhat.com>

	* configure.ac [*mingw32*]: Check $curses_found instead of
	$prefer_curses.
	* configure: Regenerate.
	* windows-termcap.c: Remove HAVE_CURSES_H, HAVE_NCURSES_H and
	HAVE_NCURSES_NCURSES_H checks.

2015-01-22  Eli Zaretskii  <eliz@gnu.org>

	* tui/tui.c (tui_enable) [__MINGW32__]: If the call to 'newterm'
	fails with the 1st arg NULL, try again with "unknown".  Don't test
	the "cup" capability: it isn't supported by the Windows port of
	ncurses, but the Windows console driver is still capable of
	supporting TUI.

2015-01-22  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* compile/compile.c (_initialize_compile): Use -fPIE for compile_args.

2015-01-22  Eli Zaretskii  <eliz@gnu.org>

	* Makefile.in (HFILES_NO_SRCDIR): Remove ada-varobj.h.
	(ALLDEPFILES): Remove irix5-nat.c.  These two are part of the
	reason that "make TAGS" is broken.

2015-01-22  Chen Gang  <gang.chen.5i5j@gmail.com>

	* hppa-tdep.c (inst_saves_gr): Fix logical working flow issues
	and check additional store instructions.

2015-01-21  Wei-cheng Wang  <cole945@gmail.com>

	* MAINTAINERS (Write After Approval): Add "Wei-cheng Wang".

2015-01-21  Wei-cheng Wang  <cole945@gmail.com>

	* ppc-linux-tdep.c (ppc_skip_trampoline_code,
	ppc_canonicalize_syscall, ppc_linux_syscall_record,
	ppc_linux_record_signal, ppc_init_linux_record_tdep): Add comments.
	* ppc64-tdep.c (ppc64_skip_trampoline_code): Likewise.
	* rs6000-tdep.c (rs6000_epilogue_frame_cache,
	rs6000_epilogue_frame_this_id, rs6000_epilogue_frame_prev_register,
	rs6000_epilogue_frame_sniffer, ppc_record_vsr, ppc_process_record_op4,
	ppc_process_record_op19, ppc_process_record_op31,
	ppc_process_record_op59, ppc_process_record_op60,
	ppc_process_record_op63): Likewise.

2015-01-20  Joel Brobecker  <brobecker@adacore.com>

	* nat/linux-ptrace.c (linux_ptrace_attach_fail_reason_string)
	(linux_ptrace_test_ret_to_nx): Use safe_strerror instead of
	strerror.

2015-01-20  Wei-cheng Wang  <cole945@gmail.com>

	* rs6000-tdep.c (ppc_process_record_op4, ppc_process_record_op19,
	ppc_process_record_op31, ppc_process_record_op59,
	ppc_process_record_op60, ppc_process_record_op63,
	ppc_process_record): Fix -Wformat warning.
	* rs6000-tdep.c (rs6000_epilogue_frame_cache, ppc_process_record_op60):
	Remove unused variables.

2015-01-20  Chen Gang  <gang.chen.5i5j@gmail.com>

	* MAINTAINERS (Write After Approval): Add "Chen Gang".

2015-01-19  Eli Zaretskii  <eliz@gnu.org>

	* configure.ac [*mingw32*]: Only add windows-termcap.o to
	CONFIG_OBS if not building with a curses library.
	* configure: Regenerate.

	* windows-termcap.c: Include defs.h.  Make the whole body empty if
	either one of HAVE_CURSES_H or HAVE_NCURSES_H or
	HAVE_NCURSES_NCURSES_H is defined.

2015-01-19  Joel Brobecker  <brobecker@adacore.com>

	* rs6000-tdep.c (rs6000_gdbarch_init): Move divide operator
	from end of line to start of next line.

2015-01-17  Wei-cheng Wang  <cole945@gmail.com>

	* ppc-linux-tdep.c (ppc_skip_trampoline_code):
	Scan PLT stub backward for reverse debugging.
	* ppc64-tdep.c (ppc64_skip_trampoline_code): Likewise.

2015-01-17  Wei-cheng Wang  <cole945@gmail.com>
	    Ulrich Weigand  <uweigand@de.ibm.com>

	* configure.tgt (powerpc*-*-linux): Add linux-record.o to
	gdb_target_obs.
	(ppc_linux_record_tdep, ppc64_linux_record_tdep): New for linux syscall
	record.
	(ppc_canonicalize_syscall, ppc_linux_syscall_record,
	ppc_linux_record_signal, ppc_init_linux_record_tdep): New functions.
	(ppc_linux_init_abi): Set process_record, process_record_signal.
	* ppc-tdep.h (struct gdbarch_tdep): Add ppc_syscall_record and
	ppc_linux_record_tdep to gdbarch_tdep.
	(ppc_process_record): New declaration.
	* rs6000-tdep.c (ppc_record_vsr, ppc_process_record_op4,
	ppc_process_record_op19, ppc_process_record_op31,
	ppc_process_record_op59, ppc_process_record_op60,
	ppc_process_record_op63, ppc_process_record): New functions.

2015-01-17  Wei-cheng Wang  <cole945@gmail.com>

	* rs6000-tdep.c (rs6000_in_function_epilogue_p): Rename to
	rs6000_in_function_epilogue_frame_p and add an argument
	for frame_info.
	(rs6000_epilogue_frame_cache, rs6000_epilogue_frame_this_id,
	rs6000_epilogue_frame_prev_register, rs6000_epilogue_frame_sniffer):
	New functions.
	(rs6000_epilogue_frame_unwind): New.
	(rs6000_gdbarch_init): Append epilogue unwinder.

2015-01-16  Sergio Durigan Junior  <sergiodj@redhat.com>

	* nat/linux-personality.c: Replace "#ifndef
	HAVE_DECL_ADDR_NO_RANDOMIZE" by "#if
	!HAVE_DECL_ADDR_NO_RANDOMIZE", fixing a regression in RHEL-5
	systems.

2015-01-16  Eli Zaretskii  <eliz@gnu.org>

	* tui/tui-win.c (tui_rehighlight_all, tui_set_var_cmd): New
	functions.
	(_initialize_tui_win) <border-kind, border-mode>:
	<active-border-mode>: Use tui_set_var_cmd as the "set" function.
	(tui_set_tab_width_command): Fix the commentary.

	* tui/tui-win.h: Add prototype for tui_rehighlight_all.

	* tui/tui-win.c (tui_scroll_left_command, tui_scroll_right_command):
	Doc fix.
	(tui_set_tab_width_command): Delete and recreate the source and
	the disassembly windows, to show the effect of the changed tab
	size immediately.

	* tui/tui-data.h (LINE_PREFIX): Make shorter
	(MAX_PID_WIDTH): Enlarge from 14 to 19, to leave enough space for
	"Thread NNNNN.XXXX" thread ID notation on Windows.

2015-01-16  Jan Kratochvil  <jan.kratochvil@redhat.com>

	Fix gcc-5 compilation.
	* hppa-tdep.c (inst_saves_gr): Fix parentheses typo.

2015-01-15  Sergio Durigan Junior  <sergiodj@redhat.com>

	* Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-personality.h.
	(linux-personality.o): New rule.
	* common/common-defs.h: Include <stdint.h>.
	* config/aarch64/linux.mh (NATDEPFILES): Include
	linux-personality.o.
	* config/alpha/alpha-linux.mh (NATDEPFILES): Likewise.
	* config/arm/linux.mh (NATDEPFILES): Likewise.
	* config/i386/linux64.mh (NATDEPFILES): Likewise.
	* config/i386/linux.mh (NATDEPFILES): Likewise.
	* config/ia64/linux.mh (NATDEPFILES): Likewise.
	* config/m32r/linux.mh (NATDEPFILES): Likewise.
	* config/m68k/linux.mh (NATDEPFILES): Likewise.
	* config/mips/linux.mh (NATDEPFILES): Likewise.
	* config/pa/linux.mh (NATDEPFILES): Likewise.
	* config/powerpc/linux.mh (NATDEPFILES): Likewise.
	* config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise.
	* config/powerpc/spu-linux.mh (NATDEPFILES): Likewise.
	* config/s390/linux.mh (NATDEPFILES): Likewise.
	* config/sparc/linux64.mh (NATDEPFILES): Likewise.
	* config/sparc/linux.mh (NATDEPFILES): Likewise.
	* config/tilegx/linux.mh (NATDEPFILES): Likewise.
	* config/xtensa/linux.mh (NATDEPFILES): Likewise.
	* defs.h: Remove #include <stdint.h> (moved to
	common/common-defs.h).
	* linux-nat.c: Include nat/linux-personality.h.  Remove #include
	<sys/personality.h>; do not define ADDR_NO_RANDOMIZE (moved to
	nat/linux-personality.c).
	(linux_nat_create_inferior): Remove code to disable address space
	randomization (moved to nat/linux-personality.c).  Create cleanup
	to disable address space randomization.
	* nat/linux-personality.c: New file.
	* nat/linux-personality.h: Likewise.

2015-01-15  Sergio Durigan Junior  <sergiodj@redhat.com>

	* Makefile.in (ALLDEPFILES): Including common/mingw-strerror.c and
	common/posix-strerror.c.
	(posix-strerror.o): New rule.
	(mingw-strerror.o): Likewise.
	* common/common-utils.h (safe_strerror): Move prototype to here,
	from utils.h.
	* common/common.host: New file.
	* common/mingw-strerror.c: Likewise.
	* common/posix-strerror.c: Likewise.
	* configure: Regenerated.
	* configure.ac: Source common/common.host.  Add variable
	common_host_obs to gdb_host_obs.
	* contrib/ari/gdb_ari.sh: Mention gdb/common/mingw-strerror.c and
	gdb/common/posix-strerror.c when warning about the use of
	strerror.
	* mingw-hdep.c (safe_strerror): Remove definition; move it to
	common/mingw-strerror.c.
	* posix-hdep.c (safe_strerror): Remove definition; move it to
	common/posix-hdep.c.
	* utils.h (safe_strerror): Remove prototype; move to
	common/common-utils.h.

2015-01-15  Joel Brobecker  <brobecker@adacore.com>

	GDB 7.8.2 released.

2015-01-15  Joel Brobecker  <brobecker@adacore.com>

	* ada-lang.c (ada_array_bound_from_type): Ignore array's parallel
	___XA type if the array has already been fixed.

2015-01-14  Yao Qi  <yao@codesourcery.com>

	* Makefile.in (ppc-linux.o): New rule.
	* config/powerpc/ppc64-linux.mh (NATDEPFILES): Add ppc-linux.o.
	* configure.ac: AC_CHECK_FUNCS(getauxval).
	* config.in: Re-generated.
	* configure: Re-generated.
	* nat/ppc-linux.h [__powerpc64__] (ppc64_64bit_inferior_p):
	Declare.
	* nat/ppc-linux.c: New file.
	* ppc-linux-nat.c (ppc_linux_target_wordsize) [__powerpc64__]:
	Call ppc64_64bit_inferior_p.

2015-01-14  Yao Qi  <yao@codesourcery.com>

	* ppc-linux-nat.c (PT_ORIG_R3, PT_TRAP): Move to
	nat/ppc-linux.h.
	(PPC_FEATURE_CELL, PPC_FEATURE_BOOKE): Likewise.
	(PPC_FEATURE_HAS_DFP): Likewise.
	(PTRACE_GETVRREGS, PTRACE_SETVRREGS): Likewise.
	(PTRACE_GETVSXREGS, PTRACE_SETVSXREGS): Likewise.
	(PTRACE_GETEVRREGS, PTRACE_SETEVRREGS): Likewise.
	Include "nat/ppc-linux.h".
	* nat/ppc-linux.h: New file.
	* Makefile.in (HFILES_NO_SRCDIR): Add nat/ppc-linux.h.

2015-01-14  Pedro Alves  <palves@redhat.com>

	PR gdb/17525
	* breakpoint.c: Include "interps.h".
	(bpstat_do_actions_1): Also check whether the interpreter is
	async.

2015-01-14  Pedro Alves  <palves@redhat.com>

	PR cli/17828
	* infrun.c (reinstall_readline_callback_handler_cleanup): Don't
	reinstall if the interpreter is sync.

2015-01-13  Doug Evans  <dje@google.com>

	* objfiles.c (objfile_filename): New function.
	* objfiles.h (objfile_filename): Declare it.
	(objfile_name): Add function comment.
	* python/py-objfile.c (objfpy_lookup_objfile_by_name): Try both the
	bfd file name (which may be realpath'd), and the original name.

2015-01-13  Joel Brobecker  <brobecker@adacore.com>

	* NEWS: Create a new section for the next release branch.
	Rename the section of the current branch, now that it has
	been cut.

2015-01-13  Joel Brobecker  <brobecker@adacore.com>

	GDB 7.9 branch created (92fc2e6978d9a7c8324c7e851dbee59e22ec7a37):
	* version.in: Bump version to 7.9.50.DATE-cvs.

2015-01-13  Joel Brobecker  <brobecker@adacore.com>

	* nat/linux-procfs.c (linux_proc_attach_tgid_threads):
	Remove trailing new-line in argument of call to warning.

2015-01-13  Joel Brobecker  <brobecker@adacore.com>

	* linux-nat.c (attach_proc_task_lwp_callback): Remove trailing
	new-line in argument of call to "warning".

2015-01-13  Joel Brobecker  <brobecker@adacore.com>

	* ada-lang.c (ada_lookup_symbol_nonlocal): If name not found
	in static block, then try searching for primitive types.

2015-01-12  Patrick Palka  <patrick@parcs.ath.cx>

	* top.h (gdb_add_history): Declare.
	* top.c (command_count): New variable.
	(gdb_add_history): New function.
	(gdb_safe_append_history): New static function.
	(quit_force): Call it.
	(command_line_input): Use gdb_add_history instead of
	add_history.
	* event-top.c (command_line_handler): Likewise.

2015-01-12  James Clarke  <jrtc27@jrtc27.com>  (tiny patch)

	PR gdb/17046
	* darwin-nat.c: Replace <machine/setjmp.h> #include by
	<setjmp.h> #include.

2015-01-11  Doug Evans  <xdje42@gmail.com>

	* dwarf2read.c (compute_delayed_physnames): Use TYPE_FN_FIELD_PHYSNAME.

2015-01-11  Doug Evans  <xdje42@gmail.com>

	PR gdb/15830
	* NEWS: The "maint demangle" command is renamed as "demangle".
	* demangle.c: #include cli/cli-utils.h, language.h.
	(demangle_command): New function.
	(_initialize_demangle): Add new command "demangle".
	* maint.c (maintenance_demangle): Stub out.
	(_initialize_maint_cmds): Update help text for "maint demangle",
	and mark as deprecated.

2015-01-11  Mark Kettenis  <kettenis@gnu.org>

	* inf-ptrace.c (inf_ptrace_follow_fork): Adjust now that
	inferior_thread is a function.

2015-01-09  Patrick Palka  <patrick@parcs.ath.cx>

	* Makefile.in (.y.c): Don't munge yacc's #line
	directives.

2015-01-09  Patrick Palka  <patrick@parcs.ath.cx>

	* utils.c (defaulted_query): Rewrite to use gdb_readline_wrapper
	to prompt for input.
	* tui/tui-hooks.c (tui_query_hook): Remove.
	(tui_install_hooks): Don't set deprecated_query_hook.
	* tui/tui-io.c (tui_redisplay_readline): Fix off-by-one error in
	height calculation.  Always update the command window's cur_line.

2015-01-09  Pedro Alves  <palves@redhat.com>

	* breakpoint.c (hardware_breakpoint_inserted_here_p): New
	function.
	* breakpoint.h (hardware_breakpoint_inserted_here_p): New
	declaration.
	* linux-nat.c (linux_nat_status_is_event): Move higher up in file.
	(linux_resume_one_lwp): Store the thread's PC.  Adjust to clear
	stop_reason.
	(check_stopped_by_watchpoint): New function.
	(save_sigtrap): Reimplement.
	(linux_nat_stopped_by_watchpoint): Adjust.
	(linux_nat_lp_status_is_event): Delete.
	(stop_wait_callback): Only call save_sigtrap after storing the
	pending status.
	(status_callback): If the thread had been stopped for a breakpoint
	that has since been removed, discard the event and resume the LWP.
	(count_events_callback, select_event_lwp_callback): Use
	lwp_status_pending_p instead of linux_nat_lp_status_is_event.
	(cancel_breakpoint): Rename to ...
	(check_stopped_by_breakpoint): ... this.  Record whether the LWP
	stopped for a software breakpoint or hardware breakpoint.
	(select_event_lwp): Only give preference to the stepping LWP in
	all-stop mode.  Adjust comments.
	(stop_and_resume_callback): Remove references to new_pending_p.
	(linux_nat_filter_event): Likewise.  Leave exit events of the
	leader thread pending here.  Handle signal short circuiting here.
	Only call save_sigtrap after storing the pending waitstatus.
	(linux_nat_wait_1): Remove 'retry' label.  Remove references to
	new_pending.  Don't handle leaving events the caller is not
	interested in pending here, nor handle signal short-circuiting
	here.  Also give equal priority to all LWPs that have had events
	in non-stop mode.  If reporting a software breakpoint event,
	unadjust the LWP's PC.
	* linux-nat.h (enum lwp_stop_reason): New.
	(struct lwp_info) <stop_pc>: New field.
	(struct lwp_info) <stopped_by_watchpoint>: Delete field.
	(struct lwp_info) <stop_reason>: New field.
	* x86-linux-nat.c (x86_linux_prepare_to_resume): Adjust.

2015-01-09  Pedro Alves  <palves@redhat.com>

	* linux-nat.c (linux_handle_extended_wait) <PTRACE_EVENT_EXEC>:
	Set the LWP's 'resumed' flag.

2015-01-09  Pedro Alves  <palves@redhat.com>

	* linux-nat.c (linux_resume_one_lwp): New function.
	(resume_lwp): Use lwp_status_pending_p and linux_resume_one_lwp.
	(linux_nat_resume): Use lwp_status_pending_p and
	linux_resume_one_lwp.
	(linux_handle_syscall_trap): Use linux_resume_one_lwp.
	(linux_handle_extended_wait): Use linux_resume_one_lwp.
	(status_callback, running_callback): Use lwp_status_pending_p.
	(lwp_status_pending_p): New function.
	(stop_and_resume_callback): Use lwp_status_pending_p.
	(linux_nat_filter_event): Use linux_resume_one_lwp.
	(linux_nat_wait_1): Always use status_callback to look for an LWP
	with a pending status.  Use linux_resume_one_lwp.
	(resume_stopped_resumed_lwps): Use lwp_status_pending_p and
	linux_resume_one_lwp.

2015-01-09  Pedro Alves  <palves@redhat.com>

	* breakpoint.c (bp_location_inserted_here_p): New function,
	factored out from ...
	(breakpoint_inserted_here_p): ... here.  Use
	ALL_BP_LOCATIONS_AT_ADDR.
	(software_breakpoint_inserted_here_p): Use
	bp_location_inserted_here_p and ALL_BP_LOCATIONS_AT_ADDR.

2014-01-09  Pedro Alves  <palves@redhat.com>

	Skip enabling event reporting if the kernel supports
	PTRACE_EVENT_CLONE.
	* linux-thread-db.c: Include "nat/linux-ptrace.h".
	(thread_db_use_events): New function.
	(try_thread_db_load_1): Check thread_db_use_events before enabling
	event reporting.
	(update_thread_state): New function.
	(attach_thread): Use it.  Check thread_db_use_events before
	enabling event reporting.
	(thread_db_detach): Check thread_db_use_events before disabling
	event reporting.
	(find_new_threads_callback): Check thread_db_use_events before
	enabling event reporting.  Update the thread's state if not using
	libthread_db events.

2015-01-09  Pedro Alves  <palves@redhat.com>

	* linux-nat.c (lin_lwp_attach_lwp): Assert that the lwp id we're
	about to wait for is > 0.
	* linux-thread-db.c (find_new_threads_callback): Ignore thread if
	the kernel thread ID is -1.

2015-01-09  Pedro Alves  <palves@redhat.com>

	* linux-nat.c (attach_proc_task_lwp_callback): New function.
	(linux_nat_attach): Use linux_proc_attach_tgid_threads.
	(wait_lwp, linux_nat_filter_event): If not set yet, set the lwp's
	ptrace option flags.
	* linux-nat.h (struct lwp_info) <must_set_ptrace_flags>: New
	field.
	* nat/linux-procfs.c: Include <dirent.h>.
	(linux_proc_get_int): New parameter "warn".  Handle it.
	(linux_proc_get_tgid): Adjust.
	(linux_proc_get_tracerpid): Rename to ...
	(linux_proc_get_tracerpid_nowarn): ... this.
	(linux_proc_pid_get_state): New function, factored out from
	(linux_proc_pid_has_state): ... this.  Add new parameter "warn"
	and handle it.
	(linux_proc_pid_is_gone): New function.
	(linux_proc_pid_is_stopped): Adjust.
	(linux_proc_pid_is_zombie_maybe_warn)
	(linux_proc_pid_is_zombie_nowarn): New functions.
	(linux_proc_pid_is_zombie): Use
	linux_proc_pid_is_zombie_maybe_warn.
	(linux_proc_attach_tgid_threads): New function.
	* nat/linux-procfs.h (linux_proc_get_tgid): Update comment.
	(linux_proc_get_tracerpid): Rename to ...
	(linux_proc_get_tracerpid_nowarn): ... this, and update comment.
	(linux_proc_pid_is_gone): New declaration.
	(linux_proc_pid_is_zombie): Update comment.
	(linux_proc_pid_is_zombie_nowarn): New declaration.
	(linux_proc_attach_lwp_func): New typedef.
	(linux_proc_attach_tgid_threads): New declaration.
	* nat/linux-ptrace.c (linux_ptrace_attach_fail_reason): Adjust to
	use nowarn functions.
	(linux_ptrace_attach_fail_reason_string): Move here from
	gdbserver/linux-low.c and rename.
	(ptrace_supports_feature): If the current ptrace options are not
	known yet, check them now, instead of asserting.
	* nat/linux-ptrace.h (linux_ptrace_attach_fail_reason_string):
	Declare.

2015-01-09  Pedro Alves  <palves@redhat.com>

	* linux-thread-db.c (thread_db_find_new_threads_silently)
	(try_thread_db_load_1, try_thread_db_load, thread_db_load_search)
	(find_new_threads_once): Print debug output on gdb_stdlog.

2015-01-09  Chen Gang  <gang.chen.5i5j@gmail.com>
	    Pedro Alves  <palves@redhat.com>

	* compile/compile.c: Include "gdb_wait.h".
	(do_rmdir): Check return value, and free 'zap'.

2015-01-08  Pedro Alves  <palves@redhat.com>
	    Yao Qi  <yao@codesourcery.com>

	* dwarf2loc.c (indirect_pieced_value): Don't call
	gdb_sign_extend.  Call extract_signed_integer instead.
	* utils.c (gdb_sign_extend): Remove.
	* utils.h (gdb_sign_extend): Remove declaration.

2015-01-07  Pierre Muller  <muller@sourceware.org>

	PR symtab/17811
	* stabsread.c (define_symbol): Set language for C++ special symbols.

2015-01-07  Patrick Palka  <patrick@parcs.ath.cx>

	* inflow.c (initial_gdb_ttystate): Tweak comment.

2015-01-07  Joel Brobecker  <brobecker@adacore.com>

	* inflow.c (set_initial_gdb_ttystate): Add empty line after
	comment documenting function.

2015-01-07  Patrick Palka  <patrick@parcs.ath.cx>

	* terminal.h (set_initial_gdb_ttystate): Declare.
	* inflow.c (initial_gdb_ttystate): New static variable.
	(set_initial_gdb_ttystate): New setter.
	(child_terminal_init_with_pgrp): Copy initial_gdb_ttystate
	instead of our current terminal state.
	* top.c (gdb_init): Call set_initial_gdb_ttystate.

2015-01-07  Joel Brobecker  <brobecker@adacore.com>

	* guile/scm-type.c (tyscm_array_1): Add comment.
	* python/py-type.c (typy_array_1): Add comment.

2015-01-06  Joel Brobecker  <brobecker@adacore.com>

	* guile/scm-type.c (tyscm_array_1): Do not raise out-of-range
	error if N2 is equal to N1 - 1.

2015-01-06  Joel Brobecker  <brobecker@adacore.com>

	* python/py-type.c (typy_array_1): Do not raise negative-length
	exception if N2 is equal to N1 - 1.

2015-01-03  Doug Evans  <xdje42@gmail.com>

	* c-exp.y: Whitespace cleanup.
	(classify_inner_name): Remove extra ;.

2015-01-02  Maciej W. Rozycki  <macro@codesourcery.com>

	* mips-tdep.c (mips32_scan_prologue): Keep the extracted stack
	offset signed.

2015-01-02  Doug Evans  <dje@google.com>

	* dwarf2read.c (setup_type_unit_groups): Remove outdated comment.

2015-01-02  Doug Evans  <dje@google.com>

	* symtab.h (struct symbol): Fix typo in comment.

2015-01-01  Joel Brobecker  <brobecker@adacore.com>

	Update year range in copyright notice of all files.

2015-01-01  Joel Brobecker  <brobecker@adacore.com>

	* top.c (print_gdb_version): Update copyright year to 2015.

2015-01-01  Joel Brobecker  <brobecker@adacore.com>

	* config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2014.

For older changes see ChangeLog-2014.

Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
coding: utf-8
End: