aboutsummaryrefslogtreecommitdiff
path: root/include/opcode
AgeCommit message (Collapse)AuthorFilesLines
2015-12-10[AArch64][PATCH 1/2] Add support for ARMv8.2 DC CVAP instruction.Matthew Wahab2-1/+8
ARMv8.2 adds the new system instruction DC CVAP. This patch series adds support for this instruction to binutils, enabled when -march=armv8.2-a is selected. The AArch64 binutils record of some system registers uses a boolean value to hold the single flag currently supported for them. To allow these registers to be limited to specific architectures, the first patch in this series replaces the boolean flag with a bitset and feature test. include/opcode/ 2015-12-10 Matthew Wahab <matthew.wahab@arm.com> * aarch64.h (aarch64_sys_ins_reg): Replace has_xt with flags. (aarch64_sys_ins_reg_has_xt): Declare. opcodes/ 2015-12-10 Matthew Wahab <matthew.wahab@arm.com> * aarch64-dis.c (aarch64_ext_regrt_sysins): Replace use of has_xt with aarch64_sys_ins_reg_has_xt. (aarch64_ext_sysins_op): Likewise. * aarch64-opc.c (operand_general_constraint_met_p): Likewise. (F_HASXT): New. (aarch64_sys_regs_ic): Update for changes to aarch64_sys_ins_reg. (aarch64_sys_regs_dc): Likewise. (aarch64_sys_regs_at): Likewise. (aarch64_sys_regs_tlbi): Likewise. (aarch64_sys_ins_reg_has_xt): New. Change-Id: I363637a6c3f54d7ffff953b3a0734e8139cae819
2015-12-10[AArch64][PATCH 1/2] Add support for RAS instruction ESB.Matthew Wahab2-0/+7
The ARMv8.2 RAS extension adds a new barrier instruction ESB as an alias and the preferred form of HINT 16. This patch adds an architectural feature flag for the RAS extension and includes it in the features selected enabled by -march=armv8.2-a. It also adds the ESB instruction, making it available whenever the RAS feature is enabled. Because ESB is the preferred form and because the target architecture isn't available to the disassembler, HINT 16 will be disassembled as ESB even when the target has no support for the RAS extension. gas/testsuite/ 2015-12-10 Matthew Wahab <matthew.wahab@arm.com> * gas/aarch64/system-2.d: New. * gas/aarch64/system-2.s: New. * gas/aarch64/system.d: Adjust expected output for HINT 16. include/opcode/ 2015-12-10 Matthew Wahab <matthew.wahab@arm.com> * aarch64.h (AARCH64_FEATURE_RAS): New. (AARCH64_ARCH_V8_2): Add AARCH64_FEATURE_RAS. opcodes/ 2015-12-10 Matthew Wahab <matthew.wahab@arm.com> * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Regenerate. * aarch64-tbl.h (aarch64_feature_ras): New. (RAS): New. (aarch64_opcode_table): Add "esb". Change-Id: Id4713917da15cca3b977284f43febd1c9b3d9faf
2015-12-10[AArch64] Fix ARMv8.1 and ARMv8.2 feature settings.Matthew Wahab2-2/+13
ARMv8.1 includes CRC as a required extension but this isn't reflected in the features enabled by -march=armv8.1-a. The FP16 feature modifier also clashes with AARCH64_FEATURE_V8_1 and the list of features for ARMv8.2 is missing ARMv8.1 features. This patch enables +crc for -march values of armv8.1-a and later. It also fixes the values for AARCH64_FEATURE_F16 and makes AARCH64_ARCH_V8_2 and superset of AARCH64_ARCH_V8_2. gas/ 2015-12-10 Matthew Wahab <matthew.wahab@arm.com> * doc/c-aarch64.texi (AArch64 Extensions): Update entry for crc. include/opcode 2015-12-10 Matthew Wahab <matthew.wahab@arm.com> * aarch64.h (AARCH64_FEATURE_F16): Fix clash with AARCH64_FEATURE_V8_1. (AARCH64_ARCH_V8_1): Add AARCH64_FEATURE_CRC. (AARCH64_ARCH_V8_2): Add AARCH64_FEATURE_CRC and AARCH64_FEATURE_V8_1. Change-Id: I8af5369f6df2430b28f6cec92870d2a4d14a7431
2015-12-04Fix failures in the GAS testsuite for the ARC architecture.Claudiu Zissulescu2-1/+5
gas * config/tc-arc.c (arc_option): Sets all internal gas options when parsing .cpu directive. (declare_register_set): Declare all 64 registers. (md_section_align): Refactor. (md_pcrel_from_section): Remove assert. (pseudo_operand_match): Fix pseudo operand match. (find_reloc): Use flags filed, extend matching. * config/tc-arc.h (TC_VALIDATE_FIX): Don't fixup any PLT relocation. testsuite * gas/arc/bic.d: Update test. * gas/arc/add_s-err.s: New file. * gas/arc/cpu-warn1.s: Likewise. * gas/arc/pcl-relocs.d: Likewise. * gas/arc/pcl-relocs.s: Likewise. * gas/arc/pcrel-relocs.d: Likewise. * gas/arc/pcrel-relocs.s: Likewise. * gas/arc/pic-relocs.d: Likewise. * gas/arc/pic-relocs.s: Likewise. * gas/arc/plt-relocs.d: Likewise. * gas/arc/plt-relocs.s: Likewise. * gas/arc/pseudos.d: Likewise. * gas/arc/pseudos.s: Likewise. * gas/arc/sda-relocs.d: Likewise. * gas/arc/sda-relocs.s: Likewise. * gas/arc/sda-relocs2.d: Likewise. * gas/arc/sda-relocs2.s: Likewise. * gas/arc/tls-relocs.d: Likewise. * gas/arc/tls-relocs.s: Likewise. opcode * arc.h (arc_reloc_equiv_tab): Replace flagcode with flags[32]. opcodes * arc-dis.c (special_flag_p): Match full mnemonic. * arc-opc.c (print_insn_arc): Check section size to read appropriate number of bytes. Fix printing. * arc-tbl.h: Fix instruction table. Allow clri/seti instruction without arguments.
2015-11-27[AArch64] Add ARMv8.2 instructions BFC and REV64.Matthew Wahab2-0/+5
ARMv8.2 adds two new instructions: BFC as an alias for BFM and REV64 as an alias for REV. This patch set adds support for these to binutils, enabled when the -march=armv8.2-a is given. It depends on the support for an instruction being its preferred form which was added in an earlier patch. This patch adds the alias BFC <Rd>, #<imm>, #<width> as the preferred form for BFM when the source is a zero register and the conditions for using the BFI form are met (in other words, BFC is the preferred form for BFI <Rd>, <Rs>, #<imm>, #<width> when the <Rs> is a zero register). gas/testsuite/ 2015-11-27 Matthew Wahab <matthew.wahab@arm.com> * gas/aarch64/alias-2.d: New. * gas/aarch64/alias-2.s: New. include/opcode/ 2015-11-27 Matthew Wahab <matthew.wahab@arm.com> * aarch64.h (aarch64_op): Add OP_BFC. opcodes/ 2015-11-27 Matthew Wahab <matthew.wahab@arm.com> * aarch64-asm-2.c: Regenerate. * aarch64-asm.c (convert_bfc_to_bfm): New. (convert_to_real): Add case for OP_BFC. * aarch64-dis-2.c: Regenerate. * aarch64-dis.c: (convert_bfm_to_bfc): New. (convert_to_alias): Add case for OP_BFC. * aarch64-opc-2.c: Regenerate. * aarch64-opc.c (operand_general_constraint_met_p): Weaken assert to allow width operand in three-operand instructions. * aarch64-tbl.h (QL_BF1): New. (aarch64_feature_v8_2): New. (ARMV8_2): New. (aarch64_opcode_table): Add "bfc". Change-Id: I6efe318b2538ba11f0caece7c6d70957441c872b
2015-11-27[AArch64] Add feature flags and command line for ARMv8.2 FP16 support.Matthew Wahab2-0/+8
ARMv8.2 adds optional support for 16-bit operations to the FP and Adv.SIMD instructions. This patch adds a feature macro for this support with a new command line option "+fp16" to enable/disable it. Although the command line option is added as an architecture extension, it only affects instructions available with when +fp or +simd is enabled. If +fp16 is specified then it will also enable +fp. There are currently no FP16 instructions implemented in binutils, this patch is to enable subsequent work on supporting the extension. gas/ 2015-11-27 Matthew Wahab <matthew.wahab@arm.com> * config/tc-aarch64.c (aarch64_features): Add "fp16". * doc/c-aarch64.texi (Architecture Extensions): Add "fp16". include/opcode/ 2015-11-27 Matthew Wahab <matthew.wahab@arm.com> * aarch64.h (AARCH64_FEATURE_F16): New. (AARCH64_ARCH_V8_2): Add AARCH64_FEATURE_F16 to ARMv8.2 features. Change-Id: Id2021e0513946e16d0935c2a5b9605574cdff95a
2015-11-20[AArch64] Add support for ARMv8.1 Virtulization Host Extensions.Matthew Wahab2-0/+7
The ARMv8.1 architecture includes the Virtualization Host Extensions which add a number of system registers. This patch adds support for these system registers, making them available when -march=armv8.1-a is selected. include/opcode/ 2015-11-20 Matthew Wahab <matthew.wahab@arm.com> * aarch64.h (AARCH64_FEATURE_V8_1): New. (AARCH64_ARCH_v8_1): Add AARCH64_FEATURE_V8_1. opcodes/ 2015-11-20 Matthew Wahab <matthew.wahab@arm.com> * aarch64-opc.c (aarch64_sys_regs): Add spsr_el12, elr_el12, sctlr_el12, cpacr_el12, ttbr1_el2, ttbr0_el12, ttbr1_el12, tcr_el12, afsr0_el12, afsr1_el12, esr_el12, far_el12, mair_el12, amair_el12, vbar_el12, contextidr_el2, contextidr_el12, cntkctl_el12, cntp_tval_el02, cntp_ctl_el02, cntp_cval_el02, cntv_tval_el02, cntv_ctl_el02, cntv_cval_el02, cnthv_tval_el2, cnthv_ctl_el2, cnthv_cval_el2. (aarch64_sys_reg_supported_p): Update for the new system registers. gas/testsuite/ 2015-11-20 Matthew Wahab <matthew.wahab@arm.com> * gas/aarch64/virthostext-directive.d: New. * gas/aarch64/virthostext.d: New. * gas/aarch64/virthostext.s: New. Change-Id: Iecb370591b1b6e9e00d81c8ccd9ae3b0f71794a2
2015-11-19[ARM] Add ARMv8.2 architecture feature and command line option.Matthew Wahab2-0/+8
ARMv8.2 is an architectural extension of ARMv8. This patch adds an architecture feature macro for ARMv8.2 to the binutils ARM target with GAS command line option -march=armv8.2-a. gas/ 2015-11-19 Matthew Wahab <matthew.wahab@arm.com> * config/tc-arm.c (arm_archs): Add "armv8.2-a". * doc/c-arm.texi (-march): Add "armv8.2-a". include/opcode/ 2015-11-19 Matthew Wahab <matthew.wahab@arm.com> * arm.h (ARM_EXT2_V8_2A): New. (ARM_ARCH_V8_2A): New. Change-Id: I9e0f50e3c6cea24e6b87b8b862fd4e1cdcc1052e
2015-11-19[AArch64] Add ARMv8.2 command line option and feature flag.Matthew Wahab2-1/+14
ARMv8.2 is an architectural extension of ARMv8. This patch adds an architecture feature macro for ARMv8.2 to the binutils AArch64 target with GAS command line option -march=armv8.2-a. gas/ 2015-11-19 Matthew Wahab <matthew.wahab@arm.com> * config/tc-aarch64.c (aarch64_archs): Add "armv8.2-a". * doc/c-aarch64.texi (-march): Likewise. include/opcode/ 2015-11-19 Matthew Wahab <matthew.wahab@arm.com> * aarch64.h (AARCH64_FEATURE_V8_2): New. (AARCH64_ARCH_V8_2): New. Change-Id: I129232ab00234a07d18ce4b619607344acb3cbaf
2015-11-11Add assembler, disassembler and linker support for power9.Peter Bergner2-0/+12
include/opcode/ * ppc.h (PPC_OPCODE_POWER9): New define. (PPC_OPCODE_VSX3): Likewise. opcodes/ * ppc-dis.c (ppc_opts): Add "power9" and "pwr9" entries. Add PPC_OPCODE_VSX3 to the vsx entry. (powerpc_init_dialect): Set default dialect to power9. * ppc-opc.c (insert_dcmxs, extract_dcmxs, insert_dxd, extract_dxd, insert_dxdn, extract_dxdn, insert_l0, extract_l0, insert_l1, extract_l1 insert_xtq6, extract_xtq6): New static functions. (insert_esync): Test for illegal L operand value. (DCMX, DCMXS, DXD, NDXD, L0, L1, RC, FC, UIM6, X_R, RIC, PRS, XSQ6, XTQ6, LRAND, IMM8, DQX, DQX_MASK, DX, DX_MASK, VXVAPS_MASK, VXVA,XVA, XX2VA, XVARC, XBF_MASK, XX2UIM4_MASK, XX2BFD_MASK, XX2DCMXS_MASK, XVA_MASK, XRLA_MASK, XBFRARB_MASK, XLRAND_MASK, POWER9, PPCVEC3, PPCVSX3): New defines. (powerpc_opcodes) <ps_cmpu0, ps_cmpo0, ps_cmpu1, ps_cmpo1, fcmpu, fcmpo, ftdiv, ftsqrt>: Use XBF_MASK. <mcrxr>: Use XBFRARB_MASK. <addpcis, bcdcfn., bcdcfsq., bcdcfz., bcdcpsgn., bcdctn., bcdctsq., bcdctz., bcds., bcdsetsgn., bcdsr., bcdtrunc., bcdus., bcdutrunc., cmpeqb, cmprb, cnttzd, cnttzd., cnttzw, cnttzw., copy, copy_first, cp_abort, darn, dtstsfi, dtstsfiq, extswsli, extswsli., ldat, ldmx, lwat, lxsd, lxsibzx, lxsihzx, lxssp, lxv, lxvb16x, lxvh8x, lxvl, lxvll, lxvwsx, lxvx, maddhd, maddhdu, maddld, mcrxrx, mfvsrld, modsd, modsw, modud, moduw, msgsync, mtvsrdd, mtvsrws, paste, paste., paste_last, rmieg, setb, slbieg, slbsync, stdat, stop, stwat, stxsd, stxsibx, stxsihx, stxssp, stxv, stxvb16x, stxvh8x, stxvl, stxvll, stxvx, subpcis, urfid, vbpermd, vclzlsbb, vcmpneb, vcmpneb., vcmpneh, vcmpneh., vcmpnew, vcmpnew., vcmpnezb, vcmpnezb., vcmpnezh, vcmpnezh., vcmpnezw, vcmpnezw., vctzb, vctzd, vctzh, vctzlsbb, vctzw, vextractd, vextractub, vextractuh, vextractuw, vextsb2d, vextsb2w, vextsh2d, vextsh2w, vextsw2d, vextublx, vextubrx, vextuhlx, vextuhrx, vextuwlx, vextuwrx, vinsertb, vinsertd, vinserth, vinsertw, vmul10cuq, vmul10ecuq, vmul10euq, vmul10uq, vnegd, vnegw, vpermr, vprtybd, vprtybq, vprtybw, vrldmi, vrldnm, vrlwmi, vrlwnm, vslv, vsrv, wait, xsabsqp, xsaddqp, xsaddqpo, xscmpeqdp, xscmpexpdp, xscmpexpqp, xscmpgedp, xscmpgtdp, xscmpnedp, xscmpoqp, xscmpuqp, xscpsgnqp, xscvdphp, xscvdpqp, xscvhpdp, xscvqpdp, xscvqpdpo, xscvqpsdz, xscvqpswz, xscvqpudz, xscvqpuwz, xscvsdqp, xscvudqp, xsdivqp, xsdivqpo, xsiexpdp, xsiexpqp, xsmaddqp, xsmaddqpo, xsmaxcdp, xsmaxjdp, xsmincdp, xsminjdp, xsmsubqp, xsmsubqpo, xsmulqp, xsmulqpo, xsnabsqp, xsnegqp, xsnmaddqp, xsnmaddqpo, xsnmsubqp, xsnmsubqpo, xsrqpi, xsrqpix, xsrqpxp, xssqrtqp, xssqrtqpo, xssubqp, xssubqpo, xststdcdp, xststdcqp, xststdcsp, xsxexpdp, xsxexpqp, xsxsigdp, xsxsigqp, xvcmpnedp, xvcmpnedp., xvcmpnesp, xvcmpnesp., xvcvhpsp, xvcvsphp, xviexpdp, xviexpsp, xvtstdcdp, xvtstdcsp, xvxexpdp, xvxexpsp, xvxsigdp, xvxsigsp, xxbrd, xxbrh, xxbrq, xxbrw, xxextractuw, xxinsertw, xxperm, xxpermr, xxspltib>: New instructions. <doze, nap, sleep, rvwinkle, waitasec, lxvx, stxvx>: Disable on POWER9. <tlbiel, tlbie, sync, slbmfev, slbmfee>: Add additional operands. include/elf/ * ppc.h (R_PPC_REL16DX_HA): New reloction. * ppc64.h (R_PPC64_REL16DX_HA): Likewise. bfd/ * elf32-ppc.c (ppc_elf_howto_raw): Add R_PPC_REL16DX_HA. (ppc_elf_reloc_type_lookup): Handle R_PPC_REL16DX_HA. (ppc_elf_addr16_ha_reloc): Likewise. (ppc_elf_check_relocs): Likewise. (ppc_elf_relocate_section): Likewise. (is_insn_dq_form): Handle lxv and stxv instructions. * elf64-ppc.c (ppc64_elf_howto_raw): Add R_PPC64_REL16DX_HA. (ppc64_elf_reloc_type_lookup): Handle R_PPC64_REL16DX_HA. (ppc64_elf_ha_reloc): Likewise. (ppc64_elf_check_relocs): Likewise. (ppc64_elf_relocate_section): Likewise. * bfd-in2.h: Regenerate. * libbfd.h: Likewise. * reloc.c (BFD_RELOC_PPC_REL16DX_HA): New. elfcpp/ * powerpc.h (R_POWERPC_REL16DX_HA): Define. gas/ * doc/as.texinfo (Target PowerPC): Document -mpower9 and -mpwr9. * doc/c-ppc.texi (PowerPC-Opts): Likewise. * config/tc-ppc.c (md_show_usage): Likewise. (md_assemble): Handle BFD_RELOC_PPC_REL16DX_HA. (md_apply_fix): Likewise. (ppc_handle_align): Handle power9's group ending nop. gas/testsuite/ * gas/ppc/altivec3.s: New test. * gas/ppc/altivec3.d: Likewise. * gas/ppc/vsx3.s: Likewise. * gas/ppc/vsx3.d: Likewise. * gas/ppc/power9.s: Likewise. * gas/ppc/power9.d: Likewise. * gas/ppc/ppc.exp: Run them. * gas/ppc/power8.s <lxvx, lxvd2x, stxvx, stxvd2x>: Add new tests. * gas/ppc/power8.d: Likewise. * gas/ppc/vsx.s: <lxvx, stxvx>: Rename invalid mnemonics ... <lxvd2x, stxvd2x>: ...to this. * gas/ppc/vsx.d: Likewise. gold/ * gold/powerpc.cc (Powerpc_relocate_functions::addr16_dq): New function. (Powerpc_relocate_functions::addr16dx_ha): Likewise. (Target_powerpc::Scan::local): Handle R_POWERPC_REL16DX_HA. (Target_powerpc::Scan::global): Likewise. (Target_powerpc::Relocate::relocate): Likewise. ld/testsuite/ * ld-powerpc/addpcis.d: New test. * ld-powerpc/addpcis.s: New test. * ld-powerpc/powerpc.exp: Run it.
2015-11-02Disassemble RX NOP instructions as such.Nick Clifton2-0/+8
opcode * rx.h (enum RX_Opcode_ID): Add more NOP opcodes. opcodes * rx-decode.opc (rx_decode_opcode): Decode extra NOP instructions. * rx-decode.c: Regenerate. tests * gas/rx/max.d: Update expecetd disassembly. * gas/rx/nod.d: Likewise. * gas/rx/nop.sm: Add tests of more NOP instructions.
2015-11-02Fix disassembly of RX zero-offset register indirect instructions.Nick Clifton2-0/+5
opcode * rx.h (enum RX_Operand_Type): Add RX_Operand_Zero_Indirect. opcodes * rx-decode.opc (rx_disp): If the displacement is zero, set the type to RX_Operand_Zero_Indirect. * rx-decode.c: Regenerate. * rx-dis (print_insn): Handle RX_Operand_Zero_Indirect. gas * config/rx-parse.y: Allow zero value for 5-bit displacements. tests * gas/rx/mov.sm: Add tests for zero offset indirect moves. * gas/rx/mov.d: Update expected output.
2015-10-28Pass noaliases_p to aarch64_decode_insnYao Qi2-1/+5
Nowadays aarch64_decode_insn is a public interface used by both opcodes and gdb. However, its behaviour relies on a global variable no_aliases, which isn't a good practise. On the other hand, In default, no_aliases is zero, but in GDB, we do want no alias when decoding instructions for prologue analysis (patches to be posted), so that we can handle both instructions "add" and "mov" (an alias of "add") as "add". The code in GDB can be simplified. This patch adds a new argument in aarch64_decode_insn, and pass no_aliases to it. In GDB side, always pass 1 to it. include/opcode: 2015-10-28 Yao Qi <yao.qi@linaro.org> * aarch64.h (aarch64_decode_insn): Update declaration. opcodes: 2015-10-28 Yao Qi <yao.qi@linaro.org> * aarch64-dis.c (aarch64_decode_insn): Add one argument noaliases_p. Update comments. Pass noaliases_p rather than no_aliases to aarch64_opcode_decode. (print_insn_aarch64_word): Pass no_aliases to aarch64_decode_insn. gdb: 2015-10-28 Yao Qi <yao.qi@linaro.org> * aarch64-tdep.c (aarch64_software_single_step): Pass 1 to aarch64_decode_insn.
2015-10-07Avoid using 'template' C++ keywordYao Qi2-1/+6
'template' is used in include/opcode/aarch64.h as below, typedef struct { const char *template; uint32_t value; int has_xt; } aarch64_sys_ins_reg; and it triggers compilation errors when GDB is built in C++ mode. In file included from git/gdb/aarch64-tdep.c:62:0: git/gdb/../include/opcode/aarch64.h:651:15: error: expected unqualified-id before 'template' const char *template; This patch is to rename field template to name. gas/ * config/tc-aarch64.c (md_begin): Access field 'name' rather than 'template'. include/opcode/ * aarch64.h (aarch64_sys_ins_reg) <template>: Removed. <name>: New field. opcodes/ * aarch64-dis.c (aarch64_ext_sysins_op): Access field 'name' rather than 'template'. * aarch64-opc.c (aarch64_print_operand): Likewise.
2015-10-07Wrap include/opcode/aarch64.h in extern "C" for C++Yao Qi2-0/+12
This is sufficient to link an aarch64 GDB built in C++ mode. Pedro did something similar in Feb https://sourceware.org/ml/binutils/2015-02/msg00176.html include/opcode/ 2015-10-07 Yao Qi <yao.qi@linaro.org> * aarch64.h [__cplusplus]: Wrap in extern "C".
2015-10-07New ARC implementation.Nick Clifton3-258/+592
bfd * archures.c: Remove support for older ARC. Added support for new ARC cpus (ARC600, ARC601, ARC700, ARCV2). * bfd-in2.h: Likewise. * config.bfd: Likewise. * cpu-arc.c: Likewise. * elf32-arc.c: Totally changed file with a refactored inplementation of the ARC port. * libbfd.h: Added ARC specific relocation types. * reloc.c: Likewise. gas * config/tc-arc.c: Revamped file for ARC support. * config/tc-arc.h: Likewise. * doc/as.texinfo: Add new ARC options. * doc/c-arc.texi: Likewise. ld * configure.tgt: Added target arc-*-elf* and arc*-*-linux-uclibc*. * emulparams/arcebelf_prof.sh: New file * emulparams/arcebelf.sh: Likewise. * emulparams/arceblinux_prof.sh: Likewise. * emulparams/arceblinux.sh: Likewise. * emulparams/arcelf_prof.sh: Likewise. * emulparams/arcelf.sh: Likewise. * emulparams/arclinux_prof.sh: Likewise. * emulparams/arclinux.sh: Likewise. * emulparams/arcv2elfx.sh: Likewise. * emulparams/arcv2elf.sh: Likewise. * emultempl/arclinux.em: Likewise. * scripttempl/arclinux.sc: Likewise. * scripttempl/elfarc.sc: Likewise. * scripttempl/elfarcv2.sc: Likewise * Makefile.am: Add new ARC emulations. * Makefile.in: Regenerate. * NEWS: Mention the new feature. opcodes * arc-dis.c: Revamped file for ARC support * arc-dis.h: Likewise. * arc-ext.c: Likewise. * arc-ext.h: Likewise. * arc-opc.c: Likewise. * arc-fxi.h: New file. * arc-regs.h: Likewise. * arc-tbl.h: Likewise. binutils * readelf.c (get_machine_name): Remove A5 reference. Add ARCompact and ARCv2. (get_machine_flags): Handle EM_ARCV2 and EM_ARCOMPACT. (guess_is_rela): Likewise. (dump_relocations): Likewise. (is_32bit_abs_reloc): Likewise. (is_16bit_abs_reloc): Likewise. (is_none_reloc): Likewise. * NEWS: Mention the new feature. include * dis-asm.h (arc_get_disassembler): Correct declaration. * arc-reloc.def: Macro file with definition of all relocation types. * arc.h: Changed macros for the newly supported ARC cpus. Altered enum defining the supported relocations. * common.h: Changed EM_ARC_A5 definition to EM_ARC_COMPACT. Added macro for EM_ARC_COMPACT2. * arc-func.h: New file. * arc.h: Likewise.
2015-10-02Make aarch64_zero_register_p declaration starts from column oneYao Qi2-2/+7
include/opcode: 2015-10-02 Yao Qi <yao.qi@linaro.org> * aarch64.h (aarch64_zero_register_p): Move the declaration to column one.
2015-10-02[aarch64] expose disas_aarch64_insn and rename it to aarch64_decode_insnYao Qi2-0/+7
We want to use disas_aarch64_insn inside GDB to decode instructions, so this patch exposes it and rename it to aarch64_decode_insn to follow the conventions of other interfaces. include/opcode: 2015-10-02 Yao Qi <yao.qi@linaro.org> * aarch64.h (aarch64_decode_insn): Declare it. opcodes: 2015-10-02 Yao Qi <yao.qi@linaro.org> * aarch64-dis.c (disas_aarch64_insn): Remove static. Change argument insn type to aarch64_insn. Rename to ... (aarch64_decode_insn): ... it. (print_insn_aarch64_word): Caller updated.
2015-09-29Add support for extensions in the .machine pseudoop on S/390, e.g. ".machine ↵Dominik Vogt2-0/+9
zEC12+nohtm+vx" gas * doc/c-s390.texi: Add documentation. Add missing code markup. * config/tc-s390.c (current_flags): New static variable. (s390_parse_cpu): Parse cpu flags a la "+nohtm" etc. (s390_setup_opcodes): Use cpu flags to determine the set of opcodes. Fix indentation. (md_parse_option): Call s390_parse_cpu with the new signature. (s390_machine): Likewise. Keep track of current_flags. Simplify code a bit. undefine MAX_HISTORY at end of function. (s390_machinemode): undefine MAX_HISTORY at end of function. Update an error message. tests * gas/s390/s390.exp: Add new tests. * gas/s390/machine-parsing-1.s: New test file. * gas/s390/machine-parsing-1.l: Likewise. * gas/s390/machine-parsing-2.s: Likewise. * gas/s390/machine-parsing-2.l: Likewise. * gas/s390/machine-parsing-3.s: Likewise. * gas/s390/machine-parsing-3.l: Likewise. * gas/s390/machine-parsing-4.s: Likewise. * gas/s390/machine-parsing-4.l: Likewise. * gas/s390/machine-parsing-5.s: Likewise. * gas/s390/machine-parsing-5.l: Likewise. * gas/s390/machine-parsing-6.s: Likewise. * gas/s390/machine-parsing-6.l: Likewise. opcode * s390.h (S390_INSTR_FLAG_HTM): New flag. (S390_INSTR_FLAG_VX): New flag. (S390_INSTR_FLAG_FACILITY_MASK): New flag mask. opcodes * s390-mkopc.c (main): Parse htm and vx flag. * s390-opc.txt: Mark instructions from the hardware transactional memory and vector facilities with the "htm"/"vx" flag.
2015-09-28FT32: define macros for instruction recognition.jamesbowman1-0/+6
Other places (e.g. the gdb stack unwinder) can use these instead of hard-coded patterns. [include/Changelog] 2015-09-26 James Bowman <james.bowman@ftdichip.com> * opcode/ft32.h: Add instruction macros FT32_*()
2015-09-23Fix compile time warnings generated when compiling with clang.Nick Clifton2-1/+6
bfd * bout.c (b_out_slurp_reloc_table): Cast constant to unsigned in order to avoid problems with left shifting negative values. (abs32code): Likewise. * mach-o.c (FILE_ALIGN): Likewise. * coff-rs6000.c (xcoff_debug_sections): Delete unused static array. * elf32-visium.c (visium_reloc_map): Likewise. * elf32-arm.c (elf32_arm_final_link_relocate): Remove useless calls to abs function. * elf32-frv.c (_frvfdpic_relax_tls_entries): Likewise. * elf32-score.c (score_elf_final_link_relocate): Likewise. * elf32-score7.c (score_elf_final_link_relocate): Likewise. * elf32-i860.c (i860_howto_pc26_reloc): Use multiplication instead of shifting to create a negative mask. * elf32-msp430.c (elf_backend_special_sections): Define. * elfxx-mips.c (got_ofst_reloc_p): Delete unused function. (got_hi16_reloc_p): Delete unused function. * ppcboot.c (ppcboot_bfd_print_private_bfd_data): Fix test of partition name. gas * config/tc-ppc.c (insn_validate): Cast PPC_OPSHIFT_INV to an int. opcode * ppc.h (PPC_OPSHIFT_INV): Use an unsigned constant when left shifting. ld * emultempl/elf32.em (ehdr_start_empty): New static variable. (before_allocation): Use it to initialise ehdr_start_save. * emultempl/pe.em (write_build_id): Remove useless double parenthesis. * emultempl/pep.em (write_build_id): Likewise. opcodes * bfin-dis.c (fmtconst): Remove unnecessary call to the abs function. * tic30-dis.c (print_branch): Likewise. * cgen-asm.c (cgen_parse_signed_integer): Cast integer to signed value before left shifting. * fr30-ibld.c (fr30_cgen_extract_operand): Likewise. * hppa-dis.c (print_insn_hppa): Likewise. * mips-dis.c (mips_cp0sel_names_mipsr5900): Delete unused static array. * msp430-dis.c (msp430_singleoperand): Likewise. (msp430_doubleoperand): Likewise. (print_insn_msp430): Likewise. * nds32-asm.c (parse_operand): Likewise. * sh-opc.h (MASK): Likewise. * v850-dis.c (get_operand_value): Likewise.
2015-09-22Enhance the RX disassembler to detect and report bad instructions.Nick Clifton2-0/+6
opcode * rx.h (enum RX_Size): Add RX_Bad_Size entry. opcodes * rx-decode.opc (bwl): Use RX_Bad_Size. (sbwl): Likewise. (ubwl): Likewise. Rename to ubw. (uBWL): Rename to uBW. Replace all references to uBWL with uBW. * rx-decode.c: Regenerate. * rx-dis.c (size_names): Add entry for RX_Bad_Size. (opsize_names): Likewise. (print_insn_rx): Detect and report RX_Bad_Size.
2015-09-09Make register name tables in visium.h static in order to prevent multiple ↵Nick Clifton2-3/+9
definitions. * visium.h (gen_reg_table): Make static. (fp_reg_table): Likewise. (cc_table): Likewise.
2015-07-24Remove leading/trailing white spaces in ChangeLogH.J. Lu1-5/+5
2015-07-21[ARM] Support correctly spelled ARMv6KZ architecture namesMatthew Wahab2-4/+11
2015-07-20 Matthew Wahab <matthew.wahab@arm.com> gas/ * NEWS: Mention corrected spelling of armv6kz. * config/tc-arm.c (arm_cpus): Replace ARM_ARCH_V6ZK with ARM_ARCH_V6KZ. (arm_archs): Likewise. Also add "armv6kz" and "armv6kzt2". * doc/c-arm.texi: Replace "armv6zk" with "armv6kz". gas/testsuite * gas/arm/attr-march-armv6kz.d: New. * gas/arm/attr-march-armv6kzt2.d: New. include/opcode * arm.h (ARM_AEXT_V6ZK): Rename to ARM_AEXT_V6KZ. (ARM_AEXT_V6ZKT2): Rename to ARM_AEXT_V6KZT2. (ARM_ARCH_V6ZK): Rename to ARM_ARCH_V6KZ. (ARM_ARCH_V6ZKT2): Rename to ARM_ARCH_V6KZT2.
2015-07-03Remove ppc860, ppc750cl, ppc7450 insns from common ppc.Alan Modra2-0/+13
Back in the day support for these processors was added, we probably didn't want to waste PPC_OPCODE bits on minor variations. I've had a complaint that disassembly of mfspr/mtspr was wrong for power8. This patch fixes that problem. Note that since -m860/-m850/-m821 are new gas options enabling the mpc8xx specific mfspr/mtspr variants it is possible that this change will break some mpc8xx assembly code. ie. you might need to modify makefiles to pass -m860 to gas. include/opcode/ * ppc.h (PPC_OPCODE_750, PPC_OPCODE_7450, PPC_OPCODE_860): Define. opcodes/ * ppc-opc.c (PPC750, PPC7450, PPC860): Define using PPC_OPCODE_*. * ppc-dis.c (ppc_opts): Add 821, 850 and 860 entries. Add PPC_OPCODE_7450 to 7450 entry. Add PPC_OPCODE_750 to 750cl entry. gas/ * config/tc-ppc.c (md_show_usage): Add -m821, -m850, -m860. * doc/c-ppc.texi (PowerPC-Opts): Likewise. gas/testsuite/ * gas/ppc/titan.d: Correct mfmcsrr0 disassembly.
2015-07-01Opcodes and assembler support for Nios II R2Sandra Loosemore3-4/+1174
2015-07-01 Sandra Loosemore <sandra@codesourcery.com> Cesar Philippidis <cesar@codesourcery.com> gas/ * config/tc-nios2.c (nios2_min_align): New. (nop): Replace with.... (nop_r1, nop_r2, nop_r2_cdx, nop32, nop16): New. (nios2_align): Handle alignment on 2-byte boundaries when CDX instructions may be present. (s_nios2_align): Adjust reference to nop. (CDXBRANCH, IS_CDXBRANCH): New. (CDX_UBRANCH_SUBTYPE, CDX_CBRANCH_SUBTYPE): New. (nios2_relax_subtype_size): Handle 2-byte CDX branches. (nios2_relax_frag): Likewise. (md_convert_frag): Handle R2 encodings. (nios2_check_overflow): Check that low-order bits are zero before applying rightshift from howto. (nios2_check_overflow): Correct negative overflow calculation. (nios2_diagnose_overflow): Handle signed_immed12_overflow. Issue generic overflow messages for miscellaneous instruction formats. (md_apply_fix): Recognize new R2 relocations. For pc_relative relocations, store fixup in *valP. (nios2_reglist_mask, nios2_reglist_dir): New. (nios2_parse_reglist): New. (nios2_parse_base_register): New. (nios2_assemble_expression): Handle constant expressions designated by BFD_RELOC_NONE. (nios2_assemble_reg3): New. (nios2_assemble_arg_c): Handle R2 instruction formats. (nios2_assemble_arg_d): Likewise. (nios2_assemble_arg_s): Likewise. (nios2_assemble_arg_t): Likewise. (nios2_assemble_arg_D): New. (nios2_assemble_arg_S): New. (nios2_assemble_arg_T): New. (nios2_assemble_arg_i): Handle R2 instruction formats. (nios2_assemble_arg_I): New. (nios2_assemble_arg_u): Handle R2 instruction formats. (nios2_assemble_arg_U): New. (nios2_assemble_arg_V): New. (nios2_assemble_arg_W): New. (nios2_assemble_arg_X): New. (nios2_assemble_arg_Y): New. (nios2_assemble_arg_o): Handle R2 instruction formats. (nios2_assemble_arg_O): New. (nios2_assemble_arg_P): New. (nios2_assemble_arg_j): Handle R2 instruction formats. (nios2_assemble_arg_k): New. (nios2_assemble_arg_l): Handle R2 instruction formats. (nios2_assemble_arg_m): Likewise. (nios2_assemble_arg_M): New. (nios2_assemble_arg_N): New. (nios2_assemble_arg_e): New. (nios2_assemble_arg_f): New. (nios2_assemble_arg_g): New. (nios2_assemble_arg_h): New. (nios2_assemble_arg_R): New. (nios2_assemble_arg_B): New. (nios2_assemble_args): Handle new argument letters. (nios2_consume_arg): Likewise. (nios2_translate_pseudo_insn): Avoid dereferencing null pointer in error message. (nios2_ps_insn_info_structs): Add nop.n. (output_ubranch): Handle CDX branches. (output_cbranch): Likewise. (output_call): Handle R2 encodings. (output_movia): Likewise. (md_begin): Initialize nios2_min_align. (md_assemble): Align to nios2_min_align. Adjust nios2_min_align if a 16-bit instruction is seen. (nios2_cons_align): Use appropriate nop pattern. include/opcode/ * nios2.h (enum iw_format_type): Add R2 formats. (enum overflow_type): Add signed_immed12_overflow and enumeration_overflow for R2. (struct nios2_opcode): Document new argument letters for R2. (REG_3BIT, REG_LDWM, REG_POP): Define. (includes): Include nios2r2.h. (nios2_r2_opcodes, nios2_num_r2_opcodes): Declare. (nios2_r2_asi_n_mappings, nios2_num_r2_asi_n_mappings): Declare. (nios2_r2_shi_n_mappings, nios2_num_r2_shi_n_mappings): Declare. (nios2_r2_andi_n_mappings, nios2_num_r2_andi_n_mappings): Declare. (nios2_r2_reg3_mappings, nios2_num_r2_reg3_mappings): Declare. (nios2_r2_reg_range_mappings, nios2_num_r2_reg_range_mappings): Declare. * nios2r2.h: New file. opcodes/ * nios2-dis.c (nios2_extract_opcode): New. (nios2_disassembler_state): New. (nios2_find_opcode_hash): Use mach parameter to select correct disassembler state. (nios2_print_insn_arg): Extend to support new R2 argument letters and formats. (print_insn_nios2): Check for 16-bit instruction at end of memory. * nios2-opc.c (nios2_builtin_regs): Add R2 register attributes. (NIOS2_NUM_OPCODES): Rename to... (NIOS2_NUM_R1_OPCODES): This. (nios2_r2_opcodes): New. (NIOS2_NUM_R2_OPCODES): New. (nios2_num_r2_opcodes): New. (nios2_r2_asi_n_mappings, nios2_num_r2_asi_n_mappings): New. (nios2_r2_shi_n_mappings, nios2_num_r2_shi_n_mappings): New. (nios2_r2_andi_n_mappings, nios2_num_r2_andi_n_mappings): New. (nios2_r2_reg3_mappings, nios2_num_r2_reg3_mappings): New. (nios2_r2_reg_range_mappings, nios2_num_r2_reg_range_mappings): New.
2015-06-19Allow for optional operands with non-zero default values.Peter Bergner2-0/+18
ISA 2.07 (ie, POWER8) added the rfebb instruction which takes one operand with the value of either a 0 or 1. It also defines an extended mnemonic with no operands (ie, "rfebb") that is supposed to be equivalent to "rfebb 1". I implemented rfebb's lone operand with PPC_OPERAND_OPTIONAL, but the problem is, optional operands that are ommitted always default to the value 0, which is wrong in this case. I have added support for allowing non-zero default values by adding an additional flag PPC_OPERAND_OPTIONAL_VALUE that specifies that the default operand value to be used is stored in the SHIFT field of the operand field immediately following this one. This fixes the rfebb issue. I also fixed the mftb and mfcr instructions so they use the same mechanism. This allows us to flag invalid uses of mfcr where we explicitly pass in a zero FXM value, like the use in a2.[sd]. include/opcode/ * ppc.h (PPC_OPERAND_OPTIONAL_VALUE): New. (ppc_optional_operand_value): New inline function. opcodes/ * ppc-dis.h (skip_optional_operands): Use ppc_optional_operand_value. * ppc-opc.c (FXM4): Add non-zero optional value. (TBR): Likewise. (SXL): Likewise. (insert_fxm): Handle new default operand value. (extract_fxm): Likewise. (insert_tbr): Likewise. (extract_tbr): Likewise. gas/ * config/tc-ppc.c (md_assemble): Use ppc_optional_operand_value. Allow for optional operands without insert functions. gas/testsuite/ * gas/ppc/power8.d: Fixup rfebb test results. * gas/ppc/a2.s: Fix invalid mfcr test. * gas/ppc/a2.d: Likewise.
2015-06-04[AArch64] Add support for ARMv8.1 command line optionMatthew Wahab2-0/+13
2015-06-03[ARM] Support for ARMv8.1 command line optionMatthew Wahab2-0/+25
2015-06-03 Matthew Wahab <matthew.wahab@arm.com> gas/ * config/tc-arm.c (arm_archs): Add "armv8.1-a". * doc/c-arm.texi (ARM Options, -march): Add "armv8.1-a". * NEWS: Mention ARMv8.1 support. include/opcode/ * arm.h (FPU_ARCH_CRYPTO_NEON_VFP_ARMV8_1): New. (ARM_ARCH_V8_1A): New. (ARM_ARCH_V8_1A_FP): New. (ARM_ARCH_V8_1A_SIMD): New. (ARM_ARCH_V8_1A_CRYPTOV1): New. (ARM_FEATURE_CORE): New.
2015-06-02[ARM] Support for ARMv8.1 Adv.SIMD extensionMatthew Wahab1-0/+6
2015-06-02[ARM] Add support for ARMv8.1 PAN extensionMatthew Wahab2-0/+8
2015-06-02[ARM] Rework CPU feature selection in the disassemblerMatthew Wahab2-0/+5
include/opcode/ * arm.h (ARM_FEATURE_ALL): New. opcodes/ * arm-dis.c (select_arm_features): Rework to avoid used of redefined macros.
2015-06-02[AArch64] Support for ARMv8.1a Adv.SIMD instructionsMatthew Wahab2-0/+5
2015-06-02 Matthew Wahab <matthew.wahab@arm.com> gas/ * config/tc-aarch64.c (aarch64_features): Add "rdma". * doc/c-aarch64.texi (AArch64 Extensions): Add "rdma". gas/testsuite/ * rdma-directive.d: New. * rdma.d: New. * rdma.s: New. include/opcode/ * aarch64.h (AARCH64_FEATURE_RDMA): New. opcode/ * aarch64-tbl.h (aarch64_feature_rdma): New. (RDMA): New. (aarch64_opcode_table): Add "sqrmlah" and "sqrdmlsh" instructions. * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Regenerate. * aarch64-opc-2.c: Regenerate.
2015-06-02[AArch64] Support for ARMv8.1a Limited Ordering Regions extensionMatthew Wahab2-0/+5
2015-06-02 Matthew Wahab <matthew.wahab@arm.com> include/ * aarch64.h (AARCH64_FEATURE_LOR): New. opcodes/ * aarch64-tbl.h (aarch64_feature_lor): New. (LOR): New. (aarch64_opdocde_table): Add "ldlar", "ldlarb", "ldlarh", "stllr", "stllrb", "stllrh". * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Regenerate. * aarch64-opc-2.c: Regenerate. gas/ * config/tc-aarch64.c (aarch64_features): Add "lor". * doc/c-aarch64.c (Aarch64 Extensions): Add "lor" to list of architecture extensions. gas/testsuite/ * lor-directive.d: New. * lor.d: New. * lor.s: New.
2015-06-01[AArch64][libopcode] Add support for PAN architecture extensionMatthew Wahab2-0/+11
The ARMv8.1 architecture introduced the Privileged Access Never extension. This adds a processor state field PSTATE.PAN which can be accessed using the MRS/MSR instructions. This patch adds support for the PAN architecture feature and processor state field to libopcode. include/opcode 2015-06-01 Matthew Wahab <matthew.wahab@arm.com> * aarch64.h (AARCH64_FEATURE_PAN): New. (aarch64_sys_reg_supported_p): Declare. (aarch64_pstatefield_supported_p): Declare. opcodes/ 2015-06-01 Matthew Wahab <matthew.wahab@arm.com> * aarch64-opc.c (F_ARCHEXT): New. (aarch64_sys_regs): Add "pan". (aarch64_sys_reg_supported_p): New. (aarch64_pstatefields): Add "pan". (aarch64_pstatefield_supported_p): New.
2015-04-30Make RL78 disassembler and simulator respect ISA for mul/divDJ Delorie2-1/+13
[gas] * config/rl78-defs.h (rl78_isa_g10): New. (rl78_isa_g13): New. (rl78_isa_g14): New. * config/rl78-parse.y (ISA_G10): New. (ISA_G13): New. (ISA_G14): New. (MULHU, MULH, MULU, DIVHU, DIVWU, MACHU, MACH): Use them. * config/tc-rl78.c (rl78_isa_g10): New. (rl78_isa_g13): New. (rl78_isa_g14): New. [gdb] * rl78-tdep.c (rl78_analyze_prologue): Pass RL78_ISA_DEFAULT to rl78_decode_opcode [include] * dis-asm.h (print_insn_rl78_g10): New. (print_insn_rl78_g13): New. (print_insn_rl78_g14): New. (rl78_get_disassembler): New. * opcode/rl78.h (RL78_Dis_Isa): New. (rl78_decode_opcode): Add ISA parameter. [opcodes] * disassemble.c (disassembler): Choose suitable disassembler based on E_ABI. * rl78-decode.opc (rl78_decode_opcode): Take ISA parameter. Use it to decode mul/div insns. * rl78-decode.c: Regenerate. * rl78-dis.c (print_insn_rl78): Rename to... (print_insn_rl78_common): ...this, take ISA parameter. (print_insn_rl78): New. (print_insn_rl78_g10): New. (print_insn_rl78_g13): New. (print_insn_rl78_g14): New. (rl78_get_disassembler): New. [sim] * rl78/cpu.c (g14_multiply): New. * rl78/cpu.h (g14_multiply): New. * rl78/load.c (rl78_load): Decode ISA completely. * rl78/main.c (main): Expand -M to include other ISAs. * rl78/rl78.c (decode_opcode): Decode based on ISA. * rl78/trace.c (rl78_disasm_fn): New. (sim_disasm_init): Reset it. (sim_disasm_one): Get correct disassembler for ISA.
2015-03-24Extend arm_feature_set struct to provide more bitsTerry Guo2-85/+134
gas/ChangeLog: 2015-03-24 Terry Guo <terry.guo@arm.com> * config/tc-arm.c (no_cpu_selected): Use new macro to compare features. (parse_psr): Likewise. (do_t_mrs): Likewise. (do_t_msr): Likewise. (static const arm_feature_set arm_ext_*): Defined with new macros. (static const arm_feature_set arm_cext_*): Likewise. (static const arm_feature_set fpu_fpa_ext_*): Likewise. (static const arm_feature_set fpu_vfp_ext_*): Likewise. (deprecated_coproc_regs): Likewise. (UL_BARRIER): Likewise. (barrier_opt_names): Likewise. (arm_cpus): Likewise. (arm_extensions): Likewise. include/opcode/ChangeLog: 2015-03-24 Terry Guo <terry.guo@arm.com> * arm.h (arm_feature_set): Extended to provide more available * bits. (ARM_ANY): Updated to follow above new definition. (ARM_CPU_HAS_FEATURE): Likewise. (ARM_CPU_IS_ANY): Likewise. (ARM_MERGE_FEATURE_SETS): Likewise. (ARM_CLEAR_FEATURE): Likewise. (ARM_FEATURE): Likewise. (ARM_FEATURE_COPY): New macro. (ARM_FEATURE_EQUAL): Likewise. (ARM_FEATURE_ZERO): Likewise. (ARM_FEATURE_CORE_EQUAL): Likewise. (ARM_FEATURE_LOW): Likewise. (ARM_FEATURE_CORE_LOW): Likewise. (ARM_FEATURE_CORE_COPROC): Likewise. opcodes/ChangeLog: 2015-03-24 Terry Guo <terry.guo@arm.com> * arm-dis.c (opcode32): Updated to use new arm feature struct. (opcode16): Likewise. (coprocessor_opcodes): Replace bit with feature struct. (neon_opcodes): Likewise. (arm_opcodes): Likewise. (thumb_opcodes): Likewise. (thumb32_opcodes): Likewise. (print_insn_coprocessor): Likewise. (print_insn_arm): Likewise. (select_arm_features): Follow new feature struct.
2015-02-19Wrap a few opcodes headers in extern "C" for C++Pedro Alves7-0/+57
These are sufficient to link an --enable-targets=all GDB build in C++ mode, on x86_64 Fedora 20. include/opcode/ 2015-02-19 Pedro Alves <palves@redhat.com> * cgen.h [__cplusplus]: Wrap in extern "C". * msp430-decode.h [__cplusplus]: Likewise. * nios2.h [__cplusplus]: Likewise. * rl78.h [__cplusplus]: Likewise. * rx.h [__cplusplus]: Likewise. * tilegx.h [__cplusplus]: Likewise. opcodes/ 2015-02-19 Pedro Alves <palves@redhat.com> * microblaze-dis.h [__cplusplus]: Wrap in extern "C".
2015-01-28FT32 initial supportAlan Modra2-0/+104
FT32 is a new 32-bit RISC core developed by FTDI for embedded applications. * configure.ac: Add FT32 support. * configure: Regenerate. bfd/ * Makefile.am: Add FT32 files. * archures.c (enum bfd_architecture): Add bfd_arch_ft32. (bfd_mach_ft32): Define. (bfd_ft32_arch): Declare. (bfd_archures_list): Add bfd_ft32_arch. * config.bfd: Handle FT32. * configure.ac: Likewise. * cpu-ft32.c: New file. * elf32-ft32.c: New file. * reloc.c (BFD_RELOC_FT32_10, BFD_RELOC_FT32_20, BFD_RELOC_FT32_17, BFD_RELOC_FT32_18): Define. * targets.c (_bfd_target_vector): Add ft32_elf32_vec. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. * Makefile.in: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. binutils/ * readelf.c: Add FT32 support. gas/ * Makefile.am: Add FT32 files. * config/tc-ft32.c: New file. * config/tc-ft32.h: New file. * configure.tgt: Add FT32 support. * Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. gas/testsuite/ * gas/ft32/ft32.exp: New file. * gas/ft32/insn.d: New file. * gas/ft32/insn.s: New file. include/ * dis-asm.h (print_insn_ft32): Declare. include/elf/ * common.h (EM_FT32): Define. * ft32.h: New file. include/opcode/ * ft32.h: New file. ld/ * Makefile.am: Add FT32 files. * configure.tgt: Handle FT32 target. * emulparams/elf32ft32.sh: New file. * scripttempl/ft32.sc: New file. * Makefile.in: Regenerate. opcodes/ * Makefile.am: Add FT32 files. * configure.ac: Handle FT32. * disassemble.c (disassembler): Call print_insn_ft32. * ft32-dis.c: New file. * ft32-opc.c: New file. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate.
2015-01-16S/390: Add support for IBM z13.Andreas Krebbel2-3/+24
- 32 128 bit vector registers (overlapping with the existing 16 64 bit floating point registers) - vector double instructions - vector integer instructions - scalar vector instructions (allowing to have more floating point registers for scalar operations) - vector string instructions gas/ChangeLog: * config/tc-s390.c (struct pd_reg): Remove. (pre_defined_registers): Remove. (REG_NAME_CNT): Remove. (reg_name_search): Calculate the register number instead of doing a lookup. (register_name, tc_s390_regname_to_dw2regnum): Adopt to the new reg_name_search signature. (s390_parse_cpu): Support the new arch string z13. (s390_insert_operand): Support for vector registers with the extra field for the fifth bit of each vector register operand. (md_gather_operand): Adjust to the new handling of optional parameters. * doc/as.texinfo: Document the z13 cpu string. gas/testsuite/ChangeLog: * gas/s390/esa-g5.d: Add a variant without the optional operand. * gas/s390/esa-g5.s: Likewise. * gas/s390/esa-z9-109.d: Likewise. * gas/s390/esa-z9-109.s: Likewise. * gas/s390/zarch-z9-109.d: Likewise. * gas/s390/zarch-z9-109.s: Likewise. * gas/s390/zarch-z10.d: For variants with a zero optional argument it is not dumped by objdump anymore. * gas/s390/zarch-zEC12.d: Likewise. * gas/s390/zarch-z13.d: New file. * gas/s390/zarch-z13.s: New file. * gas/s390/s390.exp: Run the test for the z13 files. include/opcode/ChangeLog: * s390.h (s390_opcode_cpu_val): Add S390_OPCODE_Z13. ld/testsuite/ChangeLog: * ld-s390/tlsbin.dd: The nopr register operand is optional and not printed if 0 anymore. opcodes/ChangeLog: * s390-dis.c (s390_extract_operand): Support vector register operands. (s390_print_insn_with_opcode): Support new operands types and add new handling of optional operands. * s390-mkopc.c (s390_opcode_mode_val, s390_opcode_cpu_val): Remove and include opcode/s390.h instead. (struct op_struct): New field `flags'. (insertOpcode, insertExpandedMnemonic): New parameter `flags'. (dumpTable): Dump flags. (main): Parse flags from the s390-opc.txt file. Add z13 as cpu string. * s390-opc.c: Add new operands types, instruction formats, and instruction masks. (s390_opformats): Add new formats for .insn. * s390-opc.txt: Add new instructions.
2015-01-02ChangeLog rotatation and copyright year updateAlan Modra66-66/+70
2014-12-27Limit moxie sto/ldo offsets to 16 bitsAnthony Green2-4/+9
2014-12-06Add Visium support to opcodesEric Botcazou2-0/+341
include/ * dis-asm.h (print_insn_visium): Declare. include/opcode/ * visium.h: New file. opcodes/ * configure.ac: Add Visium support. * configure: Regenerate. * Makefile.am (TARGET_LIBOPCODES_CFILES): Add visium-dis.c and visium-opc.c. * Makefile.in: Regenerate. * disassemble.c (ARCH_visium): Define if ARCH_all. (disassembler): Deal with bfd_arch_visium if ARCH_visium. * visium-dis.c: New file. * visium-opc.c: Likewise. * po/POTFILES.in: Regenerate.
2014-11-28Remove broken nios2 assembler dwim support.Sandra Loosemore2-6/+7
2014-11-28 Sandra Loosemore <sandra@codesourcery.com> include/opcode/ * nios2.h (NIOS2_INSN_ADDI, NIOS2_INSN_ANDI): Delete. (NIOS2_INSN_ORI, NIOS2_INSN_XORI): Delete. (NIOS2_INSN_OPTARG): Renumber. opcodes/ * nios2-opc.c (nios2_r1_opcodes): Remove deleted attributes from descriptors. gas/ * config/tc-nios2.c (can_evaluate_expr, get_expr_value): Delete. (output_addi, output_andi, output_ori, output_xori): Delete. (md_assemble): Remove calls to deleted functions. gas/testsuite/ * gas/nios2/nios2.exp: Make "movi" a list test. * gas/nios2/movi.s: Adjust comments, add another case. * gas/nios2/movi.l: New. * gas/nios2/movi.d: Delete.
2014-11-21Support ARM Cortex-M7Terry Guo1-2/+7
include/ChangeLog: 2014-11-21 Terry Guo <terry.guo@arm.com> * opcode/arm.h (FPU_VFP_EXT_ARMV8xD): New macro. (FPU_VFP_V5D16): Likewise. (FPU_VFP_V5_SP_D16): Likewise. (FPU_ARCH_VFP_V5D16): Likewise. (FPU_ARCH_VFP_V5_SP_D16): Likewise. bfd/ChangeLog: 2014-11-21 Terry Guo <terry.guo@arm.com> * elf32-arm.c (elf32_arm_merge_eabi_attributes): Support FPv5. binutils/ChangeLog: 2014-11-21 Terry Guo <terry.guo@arm.com> * readelf.c (arm_attr_tag_FP_arch): Extended to support FPv5. gas/ChangeLog: 2014-11-21 Terry Guo <terry.guo@arm.com> * config/tc-arm.c (fpu_vfp_ext_armv8xd): New. (arm_cpus): Support cortex-m7. (arm_fpus): Support fpv5-sp-d16 and fpv5-d16. (do_vfp_nsyn_cvt_fpv8): Generate error when use D register for S register only target like FPv5-SP-D16. (do_neon_cvttb_1): Likewise. (do_vfp_nsyn_fpv8): Likewise. (do_vrint_1): Likewise. (aeabi_set_public_attributes): Set proper FP arch for FPv5. * doc/c-arm.texi: Document new cpu and fpu names for cortex-m7. gas/testsuite/ChangeLog: 2014-11-21 Terry Guo <terry.guo@arm.com> * gas/arm/armv7e-m+fpv5-d16.s: New. * gas/arm/armv7e-m+fpv5-d16.d: Likewise. * gas/arm/armv7e-m+fpv5-sp-d16.s: Likewise. * gas/arm/armv7e-m+fpv5-sp-d16.d: Likewise. ld/testsuite/ChangeLog: 2014-11-21 Terry Guo <terry.guo@arm.com> * ld-arm/attr-merge-vfp-4-sp.s: New test source file. * ld-arm/attr-merge-vfp-5-sp.s: Likewise. * ld-arm/attr-merge-vfp-5.s: Likewise. * ld-arm/attr-merge-vfp-8.d: New test. * ld-arm/attr-merge-vfp-8r.d: Likewise. * ld-arm/attr-merge-vfp-9.d: Likewise. * ld-arm/attr-merge-vfp-9r.d: Likewise. * ld-arm/attr-merge-vfp-10.d: Likewise. * ld-arm/attr-merge-vfp-10r.d: Likewise. * ld-arm/attr-merge-vfp-11.d: Likewise. * ld-arm/attr-merge-vfp-11r.d: Likewise. * ld-arm/attr-merge-vfp-12.d: Likewise. * ld-arm/attr-merge-vfp-12r.d: Likewise. * ld-arm/attr-merge-vfp-13.d: Likewise. * ld-arm/attr-merge-vfp-13r.d: Likewise. * ld-arm/attr-merge-vfp-14.d: Likewise. * ld-arm/attr-merge-vfp-14r.d: Likewise. * ld-arm/arm-elf.exp: Run the new tests.
2014-11-06Add mach parameter to nios2_find_opcode_hash.Sandra Loosemore2-3/+8
2014-11-06 Sandra Loosemore <sandra@codesourcery.com> include/opcode/ * nios2.h (nios2_find_opcode_hash): Add mach parameter to declaration. Fix obsolete comment. opcodes/ * nios2-dis.c (nios2_find_opcode_hash): Add mach parameter. (nios2_disassemble): Adjust call to nios2_find_opcode_hash. gas/ * config/tc-nios2.c (nios2_diagnose_overflow): Adjust call to nios2_find_opcode_hash.
2014-10-31MIPS: Add Octeon 3 supportNaveen H.S1-0/+5
binutils: 2014-10-31 Andrew Pinski <apinski@cavium.com> Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com> * readelf.c (print_mips_isa_ext): Print the value of Octeon3. gas: 2014-10-31 Andrew Pinski <apinski@cavium.com> Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com> * config/tc-mips.c (CPU_IS_OCTEON): Handle CPU_OCTEON3. (mips_cpu_info_table): Octeon3 enables virt ase. * doc/c-mips.texi: Document octeon3 as an acceptable value for -march=. gas/testsuite: 2014-10-31 Andrew Pinski <apinski@cavium.com> Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com> * gas/mips/mips.exp: Add support for Octeon3 architecture. Also add in support for running Octeon3 tests. * gas/mips/octeon3.d: New test. * gas/mips/octeon3.s: New test source. opcodes: 2014-10-31 Andrew Pinski <apinski@cavium.com> Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com> * mips-dis.c (mips_arch_choices): Add octeon3. * mips-opc.c (IOCT): Include INSN_OCTEON3. (IOCT2): Likewise. (IOCT3): New define. (IVIRT): New define. (mips_builtin_opcodes): Add dmfgc0, dmtgc0, hypcall, mfgc0, mtgc0, tlbinv, tlbinvf, tlbgr, tlbgwi, tlbginv, tlbginvf, tlbgwr, tlbgp, tlti IVIRT instructions. Extend mtm0, mtm1, mtm2, mtp0, mtp1, mtp2 instructions to take another operand for IOCT3. bfd: 2014-10-31 Andrew Pinski <apinski@cavium.com> Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com> * archures.c: Add octeon3 for mips target. * bfd-in2.h: Regenerate. * bfd/cpu-mips.c: Define I_mipsocteon3. nfo_struct): Add octeon3 support. * bfd/elfxx-mips.c: (_bfd_elf_mips_mach): Add support for octeon3. (mips_set_isa_flags): Add support for octeon3. (bfd_mips_isa_ext): Add bfd_mach_mips_octeon3. (mips_mach_extensions): Make bfd_mach_mips_octeon3 an extension of bfd_mach_mips_octeon2. (print_mips_isa_ext): Print the value of Octeon3.
2014-10-23Refactoring/cleanup of nios2 opcodes and assembler code.Sandra Loosemore3-388/+551
2014-10-23 Sandra Loosemore <sandra@codesourcery.com> include/opcode/ * nios2.h (enum iw_format_type): New. (struct nios2_opcode): Update comments. Add size and format fields. (NIOS2_INSN_OPTARG): New. (REG_NORMAL, REG_CONTROL, REG_COPROCESSOR): New. (struct nios2_reg): Add regtype field. (GET_INSN_FIELD, SET_INSN_FIELD): Delete. (IW_A_LSB, IW_A_MSB, IW_A_SZ, IW_A_MASK): Delete. (IW_B_LSB, IW_B_MSB, IW_B_SZ, IW_B_MASK): Delete. (IW_C_LSB, IW_C_MSB, IW_C_SZ, IW_C_MASK): Delete. (IW_IMM16_LSB, IW_IMM16_MSB, IW_IMM16_SZ, IW_IMM16_MASK): Delete. (IW_IMM26_LSB, IW_IMM26_MSB, IW_IMM26_SZ, IW_IMM26_MASK): Delete. (IW_OP_LSB, IW_OP_MSB, IW_OP_SZ, IW_OP_MASK): Delete. (IW_OPX_LSB, IW_OPX_MSB, IW_OPX_SZ, IW_OPX_MASK): Delete. (IW_SHIFT_IMM5_LSB, IW_SHIFT_IMM5_MSB): Delete. (IW_SHIFT_IMM5_SZ, IW_SHIFT_IMM5_MASK): Delete. (IW_CONTROL_REGNUM_LSB, IW_CONTROL_REGNUM_MSB): Delete. (IW_CONTROL_REGNUM_SZ, IW_CONTROL_REGNUM_MASK): Delete. (OP_MASK_OP, OP_SH_OP): Delete. (OP_MASK_IOP, OP_SH_IOP): Delete. (OP_MASK_IRD, OP_SH_IRD): Delete. (OP_MASK_IRT, OP_SH_IRT): Delete. (OP_MASK_IRS, OP_SH_IRS): Delete. (OP_MASK_ROP, OP_SH_ROP): Delete. (OP_MASK_RRD, OP_SH_RRD): Delete. (OP_MASK_RRT, OP_SH_RRT): Delete. (OP_MASK_RRS, OP_SH_RRS): Delete. (OP_MASK_JOP, OP_SH_JOP): Delete. (OP_MASK_IMM26, OP_SH_IMM26): Delete. (OP_MASK_RCTL, OP_SH_RCTL): Delete. (OP_MASK_IMM5, OP_SH_IMM5): Delete. (OP_MASK_CACHE_OPX, OP_SH_CACHE_OPX): Delete. (OP_MASK_CACHE_RRS, OP_SH_CACHE_RRS): Delete. (OP_MASK_CUSTOM_A, OP_SH_CUSTOM_A): Delete. (OP_MASK_CUSTOM_B, OP_SH_CUSTOM_B): Delete. (OP_MASK_CUSTOM_C, OP_SH_CUSTOM_C): Delete. (OP_MASK_CUSTOM_N, OP_SH_CUSTOM_N): Delete. (OP_<insn>, OPX_<insn>, OP_MATCH_<insn>, OPX_MATCH_<insn>): Delete. (OP_MASK_<insn>, OP_MASK): Delete. (GET_IW_A, GET_IW_B, GET_IW_C, GET_IW_CONTROL_REGNUM): Delete. (GET_IW_IMM16, GET_IW_IMM26, GET_IW_OP, GET_IW_OPX): Delete. Include nios2r1.h to define new instruction opcode constants and accessors. (nios2_builtin_opcodes): Rename to nios2_r1_opcodes. (bfd_nios2_num_builtin_opcodes): Rename to nios2_num_r1_opcodes. (bfd_nios2_num_opcodes): Rename to nios2_num_opcodes. (NUMOPCODES, NUMREGISTERS): Delete. * nios2r1.h: New file. opcodes/ * nios2-opc.c (nios2_builtin_regs): Add regtype field initializers. (nios2_builtin_opcodes): Rename to nios2_r1_opcodes. Use new MATCH_R1_<insn> and MASK_R1_<insn> macros in initializers. Add size and format initializers. Merge 'b' arguments into 'j'. (NIOS2_NUM_OPCODES): Adjust definition. (bfd_nios2_num_builtin_opcodes): Rename to nios2_num_r1_opcodes. (nios2_opcodes): Adjust. (bfd_nios2_num_opcodes): Rename to nios2_num_opcodes. * nios2-dis.c (INSNLEN): Update comment. (nios2_hash_init, nios2_hash): Delete. (OPCODE_HASH_SIZE): New. (nios2_r1_extract_opcode): New. (nios2_disassembler_state): New. (nios2_r1_disassembler_state): New. (nios2_init_opcode_hash): Add state parameter. Adjust to use it. (nios2_find_opcode_hash): Use state object. (bad_opcode): New. (nios2_print_insn_arg): Add op parameter. Use it to access format. Remove 'b' case. (nios2_disassemble): Remove special case for nop. Remove hard-coded instruction size. gas/ * config/tc-nios2.c (nios2_insn_infoS): Add constant_bits field. (nios2_arg_infoS, nios2_arg_hash, nios2_arg_lookup): Delete. (nios2_control_register_arg_p): Delete. (nios2_coproc_reg): Delete. (nios2_relax_frag): Remove hard-coded instruction size. (md_convert_frag): Use new insn accessor macros. (nios2_diagnose_overflow): Remove hard-coded instruction size. (md_apply_fix): Likewise. (bad_opcode): New. (nios2_parse_reg): New. (nios2_assemble_expression): Remove prev_reloc parameter. Adjust uses and callers. (nios2_assemble_arg_c): New. (nios2_assemble_arg_d): New. (nios2_assemble_arg_s): New. (nios2_assemble_arg_t): New. (nios2_assemble_arg_i): New. (nios2_assemble_arg_u): New. (nios2_assemble_arg_o): New. (nios2_assemble_arg_j): New. (nios2_assemble_arg_l): New. (nios2_assemble_arg_m): New. (nios2_assemble_args): New. (nios2_assemble_args_dst): Delete. (nios2_assemble_args_tsi): Delete. (nios2_assemble_args_tsu): Delete. (nios2_assemble_args_sto): Delete. (nios2_assemble_args_o): Delete. (nios2_assemble_args_is): Delete. (nios2_assemble_args_m): Delete. (nios2_assemble_args_s): Delete. (nios2_assemble_args_tis): Delete. (nios2_assemble_args_dc): Delete. (nios2_assemble_args_cs): Delete. (nios2_assemble_args_ds): Delete. (nios2_assemble_args_ldst): Delete. (nios2_assemble_args_none): Delete. (nios2_assemble_args_dsj): Delete. (nios2_assemble_args_d): Delete. (nios2_assemble_args_b): Delete. (nios2_arg_info_structs): Delete. (NIOS2_NUM_ARGS): Delete. (nios2_consume_arg): Remove insn parameter. Use new macros. Don't check register arguments here. Remove 'b' case. (nios2_consume_separator): Move check for missing separators to... (nios2_parse_args): ...here. Remove special case for optional arguments. (output_insn): Avoid using hard-coded insn size. (output_ubranch): Likewise. (output_cbranch): Likewise. (output_call): Use new macros. (output_addi): Likewise. (output_ori): Likewise. (output_xori): Likewise. (output_movia): Likewise. (md_begin): Remove nios2_arg_info_structs initialization. (md_assemble): Initialize constant_bits field. Use nios2_parse_args instead of looking up parse function in hash table. gdb/ * nios2-tdep.c (nios2_analyze_prologue): Use new instruction field accessors and constants from nios2 opcodes update. (nios2_get_next_pc): Likewise.
2014-10-17opcodes, elf: annotate instructions with HWCAP2_VIS3B.Jose E. Marchesi2-1/+5
This patch annotates the following SPARC instructions as VIS3B instructions: ldx *, %efsr, fpadd64, fpsub64, fpcmpule8, fpcmpune8, fpcmpugt8, fpcmpueq8. It also improves the documentation of the VIS3B capability in several headers. Tested in sparc64-unknown-linux-gnu and sparc-unknown-linux-gnu. No visible regressions. opcodes/ChangeLog: 2014-10-17 Jose E. Marchesi <jose.marchesi@oracle.com> * sparc-opc.c (sparc-opcodes): Annotate several instructions with the HWCAP2_VIS3B hwcap. include/opcodes/ChangeLog: 2014-10-17 Jose E. Marchesi <jose.marchesi@oracle.com> * sparc.h (HWCAP2_VIS3B): Documentation improved. include/elf/ChangeLog: 2014-10-17 Jose E. Marchesi <jose.marchesi@oracle.com> * sparc.h (ELF_SPARC_HWCAP2_VIS3B): Documentation improved.
generated by cgit v1.1 at 2025-09-22 13:15:38 +0000