Age | Commit message (Collapse) | Author | Files | Lines |
|
|
|
|
|
* intl: Remove directory. Replaced with out-of-tree GNU gettext.
* .gitignore: Add '/gettext*'.
* configure.ac (host_libs): Replace intl with gettext. (hbaseargs, bbaseargs, baseargs): Split baseargs into {h,b}baseargs. (skip_barg): New flag. Skips appending current flag to bbaseargs. <library exemptions>: Exempt --with-libintl-{type,prefix} from target and build machine argument passing.
* configure: Regenerate.
* Makefile.def (host_modules): Replace intl module with gettext module. (configure-ld): Depend on configure-gettext.
* Makefile.in: Regenerate.
* src-release.sh: Remove references to the intl/ directory.
|
|
This reverts commit 675b9d612cc59446e84e2c6d89b45500cb603a8d.
See https://sourceware.org/pipermail/binutils/2023-August/128761.html.
|
|
|
|
|
|
|
|
As discussed previously, a.out support is now quite deprecated, and in
some cases removed, in both Binutils itself and NetBSD, so this legacy
default makes little sense. `netbsdelf*` and `netbsdaout*` still work
allowing the user to be explicit about there choice. Additionally, the
configure script warns about the change as Nick Clifton requested.
One possible concern was the status of NetBSD on NS32K, where only a.out
was supported. But per [1] NetBSD has removed support, and if it were to
come back, it would be with ELF. The binutils implementation is
therefore marked obsolete, per the instructions in the last message.
With that patch and this one applied, I have confirmed the following:
--target=i686-unknown-netbsd
--target=i686-unknown-netbsdelf
builds completely
--target=i686-unknown-netbsdaout
properly fails because target is deprecated.
--target=vax-unknown-netbsdaout builds completely except for gas, where
the target is deprecated.
[1]: https://mail-index.netbsd.org/tech-toolchain/2021/07/19/msg004025.html
---
bfd/config.bfd | 43 +++++++++++++--------
bfd/configure.ac | 5 +--
binutils/testsuite/binutils-all/nm.exp | 2 +-
binutils/testsuite/lib/binutils-common.exp | 7 +---
config/picflag.m4 | 4 +-
gas/configure.tgt | 9 +++--
gas/testsuite/gas/arm/blx-bl-convert.d | 2 +-
gas/testsuite/gas/arm/blx-local-thumb.d | 2 +-
gas/testsuite/gas/sh/basic.exp | 2 +-
gdb/configure.host | 34 +++++++----------
gdb/configure.tgt | 2 +-
gdb/testsuite/gdb.asm/asm-source.exp | 6 +--
intl/configure | 2 +-
ld/configure.tgt | 44 +++++++++++-----------
ld/testsuite/ld-arm/arm-elf.exp | 4 +-
ld/testsuite/ld-elf/elf.exp | 2 +-
ld/testsuite/ld-elf/shared.exp | 4 +-
libiberty/configure | 4 +-
|
|
|
|
Add an ELF based target for these as well.
PR 25224
bfd * Makefile.am: Add z80-elf target support.
* configure.ac: Likewise.
* targets.c: Likewise.
* config.bfd: Add z80-elf target support and new arches: ez80 and z180.
* elf32-z80.c: New file.
* archures.c: Add new z80 architectures: eZ80 and Z180.
* coffcode.h: Likewise.
* cpu-z80.c: Likewise.
* bfd-in2.h: Likewise plus additional Z80 relocations.
* coff-z80.c: Add new relocations for Z80 target and local label check.
gas * config/tc-z80.c: Add new architectures: Z180 and eZ80. Add support
for assembler code generated by SDCC. Add new relocation types. Add
z80-elf target support.
* config/tc-z80.h: Add z80-elf target support. Enable dollar local
labels. Local labels starts from ".L".
* testsuite/gas/all/fwdexp.d: Fix failure due to symbol conflict.
* testsuite/gas/all/fwdexp.s: Likewise.
* testsuite/gas/z80/suffix.d: Fix failure on ELF target.
* testsuite/gas/z80/z80.exp: Add new tests
* testsuite/gas/z80/dollar.d: New file.
* testsuite/gas/z80/dollar.s: New file.
* testsuite/gas/z80/ez80_adl_all.d: New file.
* testsuite/gas/z80/ez80_adl_all.s: New file.
* testsuite/gas/z80/ez80_adl_suf.d: New file.
* testsuite/gas/z80/ez80_isuf.s: New file.
* testsuite/gas/z80/ez80_z80_all.d: New file.
* testsuite/gas/z80/ez80_z80_all.s: New file.
* testsuite/gas/z80/ez80_z80_suf.d: New file.
* testsuite/gas/z80/r800_extra.d: New file.
* testsuite/gas/z80/r800_extra.s: New file.
* testsuite/gas/z80/r800_ii8.d: New file.
* testsuite/gas/z80/r800_z80_doc.d: New file.
* testsuite/gas/z80/z180.d: New file.
* testsuite/gas/z80/z180.s: New file.
* testsuite/gas/z80/z180_z80_doc.d: New file.
* testsuite/gas/z80/z80_doc.d: New file.
* testsuite/gas/z80/z80_doc.s: New file.
* testsuite/gas/z80/z80_ii8.d: New file.
* testsuite/gas/z80/z80_ii8.s: New file.
* testsuite/gas/z80/z80_in_f_c.d: New file.
* testsuite/gas/z80/z80_in_f_c.s: New file.
* testsuite/gas/z80/z80_op_ii_ld.d: New file.
* testsuite/gas/z80/z80_op_ii_ld.s: New file.
* testsuite/gas/z80/z80_out_c_0.d: New file.
* testsuite/gas/z80/z80_out_c_0.s: New file.
* testsuite/gas/z80/z80_reloc.d: New file.
* testsuite/gas/z80/z80_reloc.s: New file.
* testsuite/gas/z80/z80_sli.d: New file.
* testsuite/gas/z80/z80_sli.s: New file.
ld * Makefile.am: Add new target z80-elf
* configure.tgt: Likewise.
* emultempl/z80.em: Add support for eZ80 and Z180 architectures.
* emulparams/elf32z80.sh: New file.
* emultempl/z80elf.em: Likewise.
* testsuite/ld-z80/arch_ez80_adl.d: Likewise.
* testsuite/ld-z80/arch_ez80_z80.d: Likewise.
* testsuite/ld-z80/arch_r800.d: Likewise.
* testsuite/ld-z80/arch_z180.d: Likewise.
* testsuite/ld-z80/arch_z80.d: Likewise.
* testsuite/ld-z80/comb_arch_ez80_z80.d: Likewise.
* testsuite/ld-z80/comb_arch_z180.d: Likewise.
* testsuite/ld-z80/labels.s: Likewise.
* testsuite/ld-z80/relocs.s: Likewise.
* testsuite/ld-z80/relocs_b_ez80.d: Likewise.
* testsuite/ld-z80/relocs_b_z80.d: Likewise.
* testsuite/ld-z80/relocs_f_z80.d: Likewise.
* testsuite/ld-z80/z80.exp: Likewise.
opcodes * z80-dis.c: Add support for eZ80 and Z80 instructions.
|
|
|
|
|
|
|
|
|
|
|
|
Adds nds32 files to POTFILES.in
|
|
* po/gprof.pot: Regenerate.
|
|
2010-11-05 Tristan Gingold <gingold@adacore.com>
* po/bfd.pot: Regenerate
binutils/
2010-11-05 Tristan Gingold <gingold@adacore.com>
* po/binutils.pot: Regenerate
gas/
2010-11-05 Tristan Gingold <gingold@adacore.com>
* po/gas.pot: Regenerate
* po/POTFILES.in: Regenerate
gprof/
2010-11-05 Tristan Gingold <gingold@adacore.com>
* po/gprof.pot: Regenerate
ld/
2010-11-05 Tristan Gingold <gingold@adacore.com>
* po/ld.pot: Regenerate
* po/POTFILES.in: Regenerate
opcodes/
2010-11-05 Tristan Gingold <gingold@adacore.com>
* po/opcodes.pot: Regenerate
|
|
Updated Bulgarian translation.
Updated Finnish translations.
Updated French translations.
Updated Vietnamese translations.
|
|
* po/binutils.pot: Updated by the Translation project.
* po/gold.pot: Updated by the Translation project.
* po/gold.pot: Updated by the Translation project.
* po/gprof.pot: Updated by the Translation project.
* po/sv.po: Updated Swedish translation.
* po/ld.pot: Updated by the Translation project.
* po/fi.po: Updated Finnish translation.
* po/ld.pot: Updated by the Translation project.
* po/fi.po: Updated Finnish translation.
Updated sources to compile cleanly with -Wc++-compat:
* basic_blocks.c: Add casts.
* cg_dfn.c: Add cast.
* corefile.c: Add casts.
* gmon_io.c: Add casts.
* hist.c: Add cast.
* source.c: Add cast.
* sym_ids.c (struct match): Moved to top level.
Updated soruces in ld/* to compile cleanly with -Wc++-compat:
* ld.h (enum endian_enum,enum symbolic_enum,enum dynamic_list_enum): Move to top level.
* ldcref.c: Add casts.
* ldctor.c: Add casts.
* ldexp.c
* ldexp.h (enum node_tree_enum,enum phase_enum): Move to top level.
* ldlang.c: Add casts. (lang_insert_orphan): Use enum name instead of integer.
* ldlang.h (enum statement_enum): Move to top level.
* ldmain.c: Add casts.
* ldwrite.c: Add casts.
* lexsup.c: Add casts. (enum control_enum): Move to top level.
* mri.c: Add casts. (mri_draw_tree): Use enum name instead of integer.
Updated sources to compile cleanly with -Wc++-compat:
* basic_blocks.c: Add casts.
* cg_dfn.c: Add cast.
* corefile.c: Add casts.
* gmon_io.c: Add casts.
* hist.c: Add cast.
* source.c: Add cast.
* sym_ids.c (struct match): Moved to top level.
* as.c (main): Call dwarf2_init.
* config/obj-elf.c (struct group_list): New field.
(build_group_lists): Use hash lookup.
(free_section_idx): New function.
(elf_frob_file): Adjust.
* dwarf2dbg.c (all_segs_hash, last_seg_ptr): New variables.
(get_line_subseg): Adjust.
(dwarf2_init): New function.
* dwarf2dbg.h (dwarf2_init): New declaration.
|
|
2009-09-07 Tristan Gingold <gingold@adacore.com>
* po/SRC-POTFILES.in: Regenerate.
* po/bfd.pot: Regenerate.
binutils
2009-09-07 Tristan Gingold <gingold@adacore.com>
* po/binutils.pot: Regenerate.
gas
2009-09-07 Tristan Gingold <gingold@adacore.com>
* po/POTFILES.in: Regenerate.
* po/gas.pot: Regenerate.
gprof
2009-09-07 Tristan Gingold <gingold@adacore.com>
* po/gprof.pot: Regenerate.
ld
2009-09-07 Tristan Gingold <gingold@adacore.com>
* po/ld.pot: Regenerate.
opcodes
2009-09-07 Tristan Gingold <gingold@adacore.com>
* po/opcodes.pot: Regenerate.
|
|
Update translation templates.
|
|
|
|
|
|
|
|
* aclocal.m4: Regenerate.
* configure: Regenerate.
* po/gprof.pot: Regenerate.
|
|
instead of bfd_get_section_size_before_reloc or _raw_size.
* symtab.c (symtab_finalize): Likewise.
|
|
* Makefile.in: Regenerate.
* gconfig.in: Regenerate.
* po/gprof.pot: Regenerate.
|
|
|
|
the host architectures pointer size.
|
|
|
|
|
|
|
|
|
|
Add copy of GPL.
|
|
for m68hc11 and m68hc12 processors.
|
|
xgettext can find it. Regnerate .pot files.
|
|
|
|
values to unsigned long when calling printf.
* Makefile.am ($(OBJECTS)): Add gmon.h.
* Makefile.in: Rebuild.
|
|
|